[media] radio-aimslab: Use LM7000 driver
Convert radio-aimslab to use generic LM7000 driver.
Tested with Reveal RA300.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 98e0c8c..12c70e8 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -37,6 +37,7 @@
#include <media/v4l2-ioctl.h>
#include <media/v4l2-ctrls.h>
#include "radio-isa.h"
+#include "lm7000.h"
MODULE_AUTHOR("M. Kirkwood");
MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card.");
@@ -72,55 +73,38 @@
return rt ? &rt->isa : NULL;
}
-/* The 128+64 on these outb's is to keep the volume stable while tuning.
- * Without them, the volume _will_ creep up with each frequency change
- * and bit 4 (+16) is to keep the signal strength meter enabled.
- */
+#define AIMS_BIT_TUN_CE (1 << 0)
+#define AIMS_BIT_TUN_CLK (1 << 1)
+#define AIMS_BIT_TUN_DATA (1 << 2)
+#define AIMS_BIT_VOL_CE (1 << 3)
+#define AIMS_BIT_TUN_STRQ (1 << 4)
+/* bit 5 is not connected */
+#define AIMS_BIT_VOL_UP (1 << 6) /* active low */
+#define AIMS_BIT_VOL_DN (1 << 7) /* active low */
-static void send_0_byte(struct radio_isa_card *isa, int on)
+void rtrack_set_pins(void *handle, u8 pins)
{
- outb_p(128+64+16+on+1, isa->io); /* wr-enable + data low */
- outb_p(128+64+16+on+2+1, isa->io); /* clock */
- msleep(1);
-}
+ struct radio_isa_card *isa = handle;
+ struct rtrack *rt = container_of(isa, struct rtrack, isa);
+ u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ;
-static void send_1_byte(struct radio_isa_card *isa, int on)
-{
- outb_p(128+64+16+on+4+1, isa->io); /* wr-enable+data high */
- outb_p(128+64+16+on+4+2+1, isa->io); /* clock */
- msleep(1);
+ if (!v4l2_ctrl_g_ctrl(rt->isa.mute))
+ bits |= AIMS_BIT_VOL_CE;
+
+ if (pins & LM7000_DATA)
+ bits |= AIMS_BIT_TUN_DATA;
+ if (pins & LM7000_CLK)
+ bits |= AIMS_BIT_TUN_CLK;
+ if (pins & LM7000_CE)
+ bits |= AIMS_BIT_TUN_CE;
+
+ outb_p(bits, rt->isa.io);
}
static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq)
{
- int on = v4l2_ctrl_g_ctrl(isa->mute) ? 0 : 8;
- int i;
+ lm7000_set_freq(freq, isa, rtrack_set_pins);
- freq += 171200; /* Add 10.7 MHz IF */
- freq /= 800; /* Convert to 50 kHz units */
-
- send_0_byte(isa, on); /* 0: LSB of frequency */
-
- for (i = 0; i < 13; i++) /* : frequency bits (1-13) */
- if (freq & (1 << i))
- send_1_byte(isa, on);
- else
- send_0_byte(isa, on);
-
- send_0_byte(isa, on); /* 14: test bit - always 0 */
- send_0_byte(isa, on); /* 15: test bit - always 0 */
-
- send_0_byte(isa, on); /* 16: band data 0 - always 0 */
- send_0_byte(isa, on); /* 17: band data 1 - always 0 */
- send_0_byte(isa, on); /* 18: band data 2 - always 0 */
- send_0_byte(isa, on); /* 19: time base - always 0 */
-
- send_0_byte(isa, on); /* 20: spacing (0 = 25 kHz) */
- send_1_byte(isa, on); /* 21: spacing (1 = 25 kHz) */
- send_0_byte(isa, on); /* 22: spacing (0 = 25 kHz) */
- send_1_byte(isa, on); /* 23: AM/FM (FM = 1, always) */
-
- outb(0xd0 + on, isa->io); /* volume steady + sigstr */
return 0;
}