Merge back earlier 'pm-cpufreq' material.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index d5a0d33..acb9bfc 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -128,7 +128,7 @@
What: /sys/devices/system/cpu/cpu#/cpufreq/*
Date: pre-git history
-Contact: cpufreq@vger.kernel.org
+Contact: linux-pm@vger.kernel.org
Description: Discover and change clock speed of CPUs
Clock scaling allows you to change the clock speed of the
@@ -146,7 +146,7 @@
What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
Date: June 2013
-Contact: cpufreq@vger.kernel.org
+Contact: linux-pm@vger.kernel.org
Description: Discover CPUs in the same CPU frequency coordination domain
freqdomain_cpus is the list of CPUs (online+offline) that share
diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 0060d76..70933ea 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt
@@ -20,6 +20,7 @@
---------
1. CPUFreq core and interfaces
2. CPUFreq notifiers
+3. CPUFreq Table Generation with Operating Performance Point (OPP)
1. General Information
=======================
@@ -92,3 +93,31 @@
cpu - number of the affected CPU
old - old frequency
new - new frequency
+
+3. CPUFreq Table Generation with Operating Performance Point (OPP)
+==================================================================
+For details about OPP, see Documentation/power/opp.txt
+
+dev_pm_opp_init_cpufreq_table - cpufreq framework typically is initialized with
+ cpufreq_frequency_table_cpuinfo which is provided with the list of
+ frequencies that are available for operation. This function provides
+ a ready to use conversion routine to translate the OPP layer's internal
+ information about the available frequencies into a format readily
+ providable to cpufreq.
+
+ WARNING: Do not use this function in interrupt context.
+
+ Example:
+ soc_pm_init()
+ {
+ /* Do things */
+ r = dev_pm_opp_init_cpufreq_table(dev, &freq_table);
+ if (!r)
+ cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ /* Do other things */
+ }
+
+ NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
+ addition to CONFIG_PM_OPP.
+
+dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 48da5fd..b045fe5 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -228,3 +228,22 @@
stage. Just pass the values to this function, and the unsigned int
index returns the number of the frequency table entry which contains
the frequency the CPU shall be set to.
+
+The following macros can be used as iterators over cpufreq_frequency_table:
+
+cpufreq_for_each_entry(pos, table) - iterates over all entries of frequency
+table.
+
+cpufreq-for_each_valid_entry(pos, table) - iterates over all entries,
+excluding CPUFREQ_ENTRY_INVALID frequencies.
+Use arguments "pos" - a cpufreq_frequency_table * as a loop cursor and
+"table" - the cpufreq_frequency_table * you want to iterate over.
+
+For example:
+
+ struct cpufreq_frequency_table *pos, *driver_freq_table;
+
+ cpufreq_for_each_entry(pos, driver_freq_table) {
+ /* Do something with pos */
+ pos->frequency = ...
+ }
diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt
index 3d0b915..dc024ab 100644
--- a/Documentation/cpu-freq/index.txt
+++ b/Documentation/cpu-freq/index.txt
@@ -35,8 +35,8 @@
------------
There is a CPU frequency changing CVS commit and general list where
you can report bugs, problems or submit patches. To post a message,
-send an email to cpufreq@vger.kernel.org, to subscribe go to
-http://vger.kernel.org/vger-lists.html#cpufreq and follow the
+send an email to linux-pm@vger.kernel.org, to subscribe go to
+http://vger.kernel.org/vger-lists.html#linux-pm and follow the
instructions there.
Links
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index b8a907d..a9adad8 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -10,8 +10,7 @@
3. OPP Search Functions
4. OPP Availability Control Functions
5. OPP Data Retrieval Functions
-6. Cpufreq Table Generation
-7. Data Structures
+6. Data Structures
1. Introduction
===============
@@ -72,7 +71,6 @@
OPP library facilitates this concept in it's implementation. The following
operational functions operate only on available opps:
opp_find_freq_{ceil, floor}, dev_pm_opp_get_voltage, dev_pm_opp_get_freq, dev_pm_opp_get_opp_count
-and dev_pm_opp_init_cpufreq_table
dev_pm_opp_find_freq_exact is meant to be used to find the opp pointer which can then
be used for dev_pm_opp_enable/disable functions to make an opp available as required.
@@ -96,10 +94,9 @@
opp_get_{voltage, freq, opp_count} fall into this category.
opp_{add,enable,disable} are updaters which use mutex and implement it's own
-RCU locking mechanisms. dev_pm_opp_init_cpufreq_table acts as an updater and uses
-mutex to implment RCU updater strategy. These functions should *NOT* be called
-under RCU locks and other contexts that prevent blocking functions in RCU or
-mutex operations from working.
+RCU locking mechanisms. These functions should *NOT* be called under RCU locks
+and other contexts that prevent blocking functions in RCU or mutex operations
+from working.
2. Initial OPP List Registration
================================
@@ -311,34 +308,7 @@
/* Do other things */
}
-6. Cpufreq Table Generation
-===========================
-dev_pm_opp_init_cpufreq_table - cpufreq framework typically is initialized with
- cpufreq_frequency_table_cpuinfo which is provided with the list of
- frequencies that are available for operation. This function provides
- a ready to use conversion routine to translate the OPP layer's internal
- information about the available frequencies into a format readily
- providable to cpufreq.
-
- WARNING: Do not use this function in interrupt context.
-
- Example:
- soc_pm_init()
- {
- /* Do things */
- r = dev_pm_opp_init_cpufreq_table(dev, &freq_table);
- if (!r)
- cpufreq_frequency_table_cpuinfo(policy, freq_table);
- /* Do other things */
- }
-
- NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
- addition to CONFIG_PM as power management feature is required to
- dynamically scale voltage and frequency in a system.
-
-dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table
-
-7. Data Structures
+6. Data Structures
==================
Typically an SoC contains multiple voltage domains which are variable. Each
domain is represented by a device pointer. The relationship to OPP can be
diff --git a/MAINTAINERS b/MAINTAINERS
index 1066264..06d2506 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2415,7 +2415,6 @@
CPU FREQUENCY DRIVERS
M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Viresh Kumar <viresh.kumar@linaro.org>
-L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
@@ -2426,7 +2425,6 @@
CPU FREQUENCY DRIVERS - ARM BIG LITTLE
M: Viresh Kumar <viresh.kumar@linaro.org>
M: Sudeep Holla <sudeep.holla@arm.com>
-L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
S: Maintained
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 85399c9..45ce065 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1092,20 +1092,21 @@
static int da850_round_armrate(struct clk *clk, unsigned long rate)
{
- int i, ret = 0, diff;
+ int ret = 0, diff;
unsigned int best = (unsigned int) -1;
struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
+ struct cpufreq_frequency_table *pos;
rate /= 1000; /* convert to kHz */
- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- diff = table[i].frequency - rate;
+ cpufreq_for_each_entry(pos, table) {
+ diff = pos->frequency - rate;
if (diff < 0)
diff = -diff;
if (diff < best) {
best = diff;
- ret = table[i].frequency;
+ ret = pos->frequency;
}
}
diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c
index e1f427f..1eed38e 100644
--- a/arch/mips/loongson/lemote-2f/clock.c
+++ b/arch/mips/loongson/lemote-2f/clock.c
@@ -91,9 +91,9 @@
int clk_set_rate(struct clk *clk, unsigned long rate)
{
+ struct cpufreq_frequency_table *pos;
int ret = 0;
int regval;
- int i;
if (likely(clk->ops && clk->ops->set_rate)) {
unsigned long flags;
@@ -106,22 +106,16 @@
if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
propagate_rate(clk);
- for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END;
- i++) {
- if (loongson2_clockmod_table[i].frequency ==
- CPUFREQ_ENTRY_INVALID)
- continue;
- if (rate == loongson2_clockmod_table[i].frequency)
+ cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
+ if (rate == pos->frequency)
break;
- }
- if (rate != loongson2_clockmod_table[i].frequency)
+ if (rate != pos->frequency)
return -ENOTSUPP;
clk->rate = rate;
regval = LOONGSON_CHIPCFG0;
- regval = (regval & ~0x7) |
- (loongson2_clockmod_table[i].driver_data - 1);
+ regval = (regval & ~0x7) | (pos->driver_data - 1);
LOONGSON_CHIPCFG0 = regval;
return ret;
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 2553867..d9e376a 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <linux/cpufreq.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/rculist.h>
@@ -596,96 +595,6 @@
}
EXPORT_SYMBOL_GPL(dev_pm_opp_disable);
-#ifdef CONFIG_CPU_FREQ
-/**
- * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
- * @dev: device for which we do this operation
- * @table: Cpufreq table returned back to caller
- *
- * Generate a cpufreq table for a provided device- this assumes that the
- * opp list is already initialized and ready for usage.
- *
- * This function allocates required memory for the cpufreq table. It is
- * expected that the caller does the required maintenance such as freeing
- * the table as required.
- *
- * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
- * if no memory available for the operation (table is not populated), returns 0
- * if successful and table is populated.
- *
- * WARNING: It is important for the callers to ensure refreshing their copy of
- * the table if any of the mentioned functions have been invoked in the interim.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * To simplify the logic, we pretend we are updater and hold relevant mutex here
- * Callers should ensure that this function is *NOT* called under RCU protection
- * or in contexts where mutex locking cannot be used.
- */
-int dev_pm_opp_init_cpufreq_table(struct device *dev,
- struct cpufreq_frequency_table **table)
-{
- struct device_opp *dev_opp;
- struct dev_pm_opp *opp;
- struct cpufreq_frequency_table *freq_table;
- int i = 0;
-
- /* Pretend as if I am an updater */
- mutex_lock(&dev_opp_list_lock);
-
- dev_opp = find_device_opp(dev);
- if (IS_ERR(dev_opp)) {
- int r = PTR_ERR(dev_opp);
- mutex_unlock(&dev_opp_list_lock);
- dev_err(dev, "%s: Device OPP not found (%d)\n", __func__, r);
- return r;
- }
-
- freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) *
- (dev_pm_opp_get_opp_count(dev) + 1), GFP_KERNEL);
- if (!freq_table) {
- mutex_unlock(&dev_opp_list_lock);
- dev_warn(dev, "%s: Unable to allocate frequency table\n",
- __func__);
- return -ENOMEM;
- }
-
- list_for_each_entry(opp, &dev_opp->opp_list, node) {
- if (opp->available) {
- freq_table[i].driver_data = i;
- freq_table[i].frequency = opp->rate / 1000;
- i++;
- }
- }
- mutex_unlock(&dev_opp_list_lock);
-
- freq_table[i].driver_data = i;
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- *table = &freq_table[0];
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
-
-/**
- * dev_pm_opp_free_cpufreq_table() - free the cpufreq table
- * @dev: device for which we do this operation
- * @table: table to free
- *
- * Free up the table allocated by dev_pm_opp_init_cpufreq_table
- */
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
- struct cpufreq_frequency_table **table)
-{
- if (!table)
- return;
-
- kfree(*table);
- *table = NULL;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
-#endif /* CONFIG_CPU_FREQ */
-
/**
* dev_pm_opp_get_notifier() - find notifier_head of the device with opp
* @dev: device pointer used to lookup device OPPs.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5805035..6e05a1e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -85,7 +85,7 @@
It allows usage of special frequencies for Samsung Exynos
processors if thermal conditions are appropriate.
- It reguires, for safe operation, thermal framework with properly
+ It requires, for safe operation, thermal framework with properly
defined trip points.
If in doubt, say N.
@@ -186,7 +186,7 @@
S3C2450 SoC. The S3C2416 supports changing the rate of the
armdiv clock source and also entering a so called dynamic
voltage scaling mode in which it is possible to reduce the
- core voltage of the cpu.
+ core voltage of the CPU.
If in doubt, say N.
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index d369349..89ae88f 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -10,7 +10,7 @@
The driver implements an internal governor and will become
the scaling driver and governor for Sandy bridge processors.
- When this driver is enabled it will become the perferred
+ When this driver is enabled it will become the preferred
scaling driver for Sandy bridge processors.
If in doubt, say N.
@@ -52,7 +52,7 @@
help
The powernow-k8 driver used to provide a sysfs knob called "cpb"
to disable the Core Performance Boosting feature of AMD CPUs. This
- file has now been superseeded by the more generic "boost" entry.
+ file has now been superseded by the more generic "boost" entry.
By enabling this option the acpi_cpufreq driver provides the old
entry in addition to the new boost ones, for compatibility reasons.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 0dbb963c..738c8b7 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -1,5 +1,7 @@
# CPUfreq core
obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o
+obj-$(CONFIG_PM_OPP) += cpufreq_opp.o
+
# CPUfreq stats
obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 000e4e0..b0c18ed 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -213,7 +213,7 @@
static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
{
- int i;
+ struct cpufreq_frequency_table *pos;
struct acpi_processor_performance *perf;
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
@@ -223,10 +223,9 @@
perf = data->acpi_data;
- for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- if (msr == perf->states[data->freq_table[i].driver_data].status)
- return data->freq_table[i].frequency;
- }
+ cpufreq_for_each_entry(pos, data->freq_table)
+ if (msr == perf->states[pos->driver_data].status)
+ return pos->frequency;
return data->freq_table[0].frequency;
}
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index bad2ed3..1f4d4e3 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -226,22 +226,22 @@
/* get the minimum frequency in the cpufreq_frequency_table */
static inline u32 get_table_min(struct cpufreq_frequency_table *table)
{
- int i;
+ struct cpufreq_frequency_table *pos;
uint32_t min_freq = ~0;
- for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++)
- if (table[i].frequency < min_freq)
- min_freq = table[i].frequency;
+ cpufreq_for_each_entry(pos, table)
+ if (pos->frequency < min_freq)
+ min_freq = pos->frequency;
return min_freq;
}
/* get the maximum frequency in the cpufreq_frequency_table */
static inline u32 get_table_max(struct cpufreq_frequency_table *table)
{
- int i;
+ struct cpufreq_frequency_table *pos;
uint32_t max_freq = 0;
- for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++)
- if (table[i].frequency > max_freq)
- max_freq = table[i].frequency;
+ cpufreq_for_each_entry(pos, table)
+ if (pos->frequency > max_freq)
+ max_freq = pos->frequency;
return max_freq;
}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index abda660..bfe82b6 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -237,6 +237,17 @@
}
EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
+bool cpufreq_next_valid(struct cpufreq_frequency_table **pos)
+{
+ while ((*pos)->frequency != CPUFREQ_TABLE_END)
+ if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID)
+ return true;
+ else
+ (*pos)++;
+ return false;
+}
+EXPORT_SYMBOL_GPL(cpufreq_next_valid);
+
/*********************************************************************
* EXTERNALLY AFFECTING FREQUENCY CHANGES *
*********************************************************************/
@@ -354,6 +365,18 @@
void cpufreq_freq_transition_begin(struct cpufreq_policy *policy,
struct cpufreq_freqs *freqs)
{
+
+ /*
+ * Catch double invocations of _begin() which lead to self-deadlock.
+ * ASYNC_NOTIFICATION drivers are left out because the cpufreq core
+ * doesn't invoke _begin() on their behalf, and hence the chances of
+ * double invocations are very low. Moreover, there are scenarios
+ * where these checks can emit false-positive warnings in these
+ * drivers; so we avoid that by skipping them altogether.
+ */
+ WARN_ON(!(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION)
+ && current == policy->transition_task);
+
wait:
wait_event(policy->transition_wait, !policy->transition_ongoing);
@@ -365,6 +388,7 @@
}
policy->transition_ongoing = true;
+ policy->transition_task = current;
spin_unlock(&policy->transition_lock);
@@ -381,6 +405,7 @@
cpufreq_notify_post_transition(policy, freqs, transition_failed);
policy->transition_ongoing = false;
+ policy->transition_task = NULL;
wake_up(&policy->transition_wait);
}
diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/cpufreq/cpufreq_opp.c
new file mode 100644
index 0000000..c0c6f4a
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_opp.c
@@ -0,0 +1,110 @@
+/*
+ * Generic OPP helper interface for CPUFreq drivers
+ *
+ * Copyright (C) 2009-2014 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Romit Dasgupta
+ * Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/pm_opp.h>
+#include <linux/rcupdate.h>
+#include <linux/slab.h>
+
+/**
+ * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
+ * @dev: device for which we do this operation
+ * @table: Cpufreq table returned back to caller
+ *
+ * Generate a cpufreq table for a provided device- this assumes that the
+ * opp list is already initialized and ready for usage.
+ *
+ * This function allocates required memory for the cpufreq table. It is
+ * expected that the caller does the required maintenance such as freeing
+ * the table as required.
+ *
+ * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
+ * if no memory available for the operation (table is not populated), returns 0
+ * if successful and table is populated.
+ *
+ * WARNING: It is important for the callers to ensure refreshing their copy of
+ * the table if any of the mentioned functions have been invoked in the interim.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Since we just use the regular accessor functions to access the internal data
+ * structures, we use RCU read lock inside this function. As a result, users of
+ * this function DONOT need to use explicit locks for invoking.
+ */
+int dev_pm_opp_init_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table)
+{
+ struct dev_pm_opp *opp;
+ struct cpufreq_frequency_table *freq_table = NULL;
+ int i, max_opps, ret = 0;
+ unsigned long rate;
+
+ rcu_read_lock();
+
+ max_opps = dev_pm_opp_get_opp_count(dev);
+ if (max_opps <= 0) {
+ ret = max_opps ? max_opps : -ENODATA;
+ goto out;
+ }
+
+ freq_table = kzalloc(sizeof(*freq_table) * (max_opps + 1), GFP_KERNEL);
+ if (!freq_table) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 0, rate = 0; i < max_opps; i++, rate++) {
+ /* find next rate */
+ opp = dev_pm_opp_find_freq_ceil(dev, &rate);
+ if (IS_ERR(opp)) {
+ ret = PTR_ERR(opp);
+ goto out;
+ }
+ freq_table[i].driver_data = i;
+ freq_table[i].frequency = rate / 1000;
+ }
+
+ freq_table[i].driver_data = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+
+out:
+ rcu_read_unlock();
+ if (ret)
+ kfree(freq_table);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
+
+/**
+ * dev_pm_opp_free_cpufreq_table() - free the cpufreq table
+ * @dev: device for which we do this operation
+ * @table: table to free
+ *
+ * Free up the table allocated by dev_pm_opp_init_cpufreq_table
+ */
+void dev_pm_opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table)
+{
+ if (!table)
+ return;
+
+ kfree(*table);
+ *table = NULL;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index ecaaebf..0cd9b4d 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -182,11 +182,11 @@
static int __cpufreq_stats_create_table(struct cpufreq_policy *policy)
{
- unsigned int i, j, count = 0, ret = 0;
+ unsigned int i, count = 0, ret = 0;
struct cpufreq_stats *stat;
unsigned int alloc_size;
unsigned int cpu = policy->cpu;
- struct cpufreq_frequency_table *table;
+ struct cpufreq_frequency_table *pos, *table;
table = cpufreq_frequency_get_table(cpu);
if (unlikely(!table))
@@ -205,12 +205,8 @@
stat->cpu = cpu;
per_cpu(cpufreq_stats_table, cpu) = stat;
- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- unsigned int freq = table[i].frequency;
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
+ cpufreq_for_each_valid_entry(pos, table)
count++;
- }
alloc_size = count * sizeof(int) + count * sizeof(u64);
@@ -228,15 +224,11 @@
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
stat->trans_table = stat->freq_table + count;
#endif
- j = 0;
- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- unsigned int freq = table[i].frequency;
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
- if (freq_table_get_index(stat, freq) == -1)
- stat->freq_table[j++] = freq;
- }
- stat->state_num = j;
+ i = 0;
+ cpufreq_for_each_valid_entry(pos, table)
+ if (freq_table_get_index(stat, pos->frequency) == -1)
+ stat->freq_table[i++] = pos->frequency;
+ stat->state_num = i;
spin_lock(&cpufreq_stats_lock);
stat->last_time = get_jiffies_64();
stat->last_index = freq_table_get_index(stat, policy->cur);
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 412a78b..4bebc1b 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -45,7 +45,7 @@
static int dbx500_cpufreq_probe(struct platform_device *pdev)
{
- int i = 0;
+ struct cpufreq_frequency_table *pos;
freq_table = dev_get_platdata(&pdev->dev);
if (!freq_table) {
@@ -60,10 +60,8 @@
}
pr_info("dbx500-cpufreq: Available frequencies:\n");
- while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
- pr_info(" %d Mhz\n", freq_table[i].frequency/1000);
- i++;
- }
+ cpufreq_for_each_entry(pos, freq_table)
+ pr_info(" %d Mhz\n", pos->frequency / 1000);
return cpufreq_register_driver(&dbx500_cpufreq_driver);
}
diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
index 7f5d2a6..1c06e78 100644
--- a/drivers/cpufreq/elanfreq.c
+++ b/drivers/cpufreq/elanfreq.c
@@ -147,7 +147,7 @@
static int elanfreq_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = &cpu_data(0);
- unsigned int i;
+ struct cpufreq_frequency_table *pos;
/* capability check */
if ((c->x86_vendor != X86_VENDOR_AMD) ||
@@ -159,10 +159,9 @@
max_freq = elanfreq_get_cpu_frequency(0);
/* table init */
- for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
- if (elanfreq_table[i].frequency > max_freq)
- elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
- }
+ cpufreq_for_each_entry(pos, elanfreq_table)
+ if (pos->frequency > max_freq)
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
/* cpuinfo and default policy values */
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index f99cfe2..c3e55aa 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -29,17 +29,16 @@
static int exynos_cpufreq_get_index(unsigned int freq)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
- int index;
+ struct cpufreq_frequency_table *pos;
- for (index = 0;
- freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
- if (freq_table[index].frequency == freq)
+ cpufreq_for_each_entry(pos, freq_table)
+ if (pos->frequency == freq)
break;
- if (freq_table[index].frequency == CPUFREQ_TABLE_END)
+ if (pos->frequency == CPUFREQ_TABLE_END)
return -EINVAL;
- return index;
+ return pos - freq_table;
}
static int exynos_cpufreq_scale(unsigned int target_freq)
@@ -49,6 +48,7 @@
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
unsigned int arm_volt, safe_arm_volt = 0;
unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+ struct device *dev = exynos_info->dev;
unsigned int old_freq;
int index, old_index;
int ret = 0;
@@ -90,8 +90,8 @@
/* Firstly, voltage up to increase frequency */
ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
if (ret) {
- pr_err("%s: failed to set cpu voltage to %d\n",
- __func__, arm_volt);
+ dev_err(dev, "failed to set cpu voltage to %d\n",
+ arm_volt);
return ret;
}
}
@@ -100,8 +100,8 @@
ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
safe_arm_volt);
if (ret) {
- pr_err("%s: failed to set cpu voltage to %d\n",
- __func__, safe_arm_volt);
+ dev_err(dev, "failed to set cpu voltage to %d\n",
+ safe_arm_volt);
return ret;
}
}
@@ -115,8 +115,8 @@
ret = regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
if (ret) {
- pr_err("%s: failed to set cpu voltage to %d\n",
- __func__, arm_volt);
+ dev_err(dev, "failed to set cpu voltage to %d\n",
+ arm_volt);
goto out;
}
}
@@ -163,6 +163,8 @@
if (!exynos_info)
return -ENOMEM;
+ exynos_info->dev = &pdev->dev;
+
if (soc_is_exynos4210())
ret = exynos4210_cpufreq_init(exynos_info);
else if (soc_is_exynos4212() || soc_is_exynos4412())
@@ -176,13 +178,13 @@
goto err_vdd_arm;
if (exynos_info->set_freq == NULL) {
- pr_err("%s: No set_freq function (ERR)\n", __func__);
+ dev_err(&pdev->dev, "No set_freq function (ERR)\n");
goto err_vdd_arm;
}
arm_regulator = regulator_get(NULL, "vdd_arm");
if (IS_ERR(arm_regulator)) {
- pr_err("%s: failed to get resource vdd_arm\n", __func__);
+ dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
goto err_vdd_arm;
}
@@ -192,7 +194,7 @@
if (!cpufreq_register_driver(&exynos_driver))
return 0;
- pr_err("%s: failed to register cpufreq driver\n", __func__);
+ dev_err(&pdev->dev, "failed to register cpufreq driver\n");
regulator_put(arm_regulator);
err_vdd_arm:
kfree(exynos_info);
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 3ddade8..b72ff10 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -34,6 +34,7 @@
};
struct exynos_dvfs_info {
+ struct device *dev;
unsigned long mpll_freq_khz;
unsigned int pll_safe_idx;
struct clk *cpu_clk;
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index a6b8214..f33f25b 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -114,25 +114,23 @@
static int init_div_table(void)
{
- struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
+ struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table;
unsigned int tmp, clk_div, ema_div, freq, volt_id;
- int i = 0;
struct dev_pm_opp *opp;
rcu_read_lock();
- for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) {
-
+ cpufreq_for_each_entry(pos, freq_tbl) {
opp = dev_pm_opp_find_freq_exact(dvfs_info->dev,
- freq_tbl[i].frequency * 1000, true);
+ pos->frequency * 1000, true);
if (IS_ERR(opp)) {
rcu_read_unlock();
dev_err(dvfs_info->dev,
"failed to find valid OPP for %u KHZ\n",
- freq_tbl[i].frequency);
+ pos->frequency);
return PTR_ERR(opp);
}
- freq = freq_tbl[i].frequency / 1000; /* In MHZ */
+ freq = pos->frequency / 1000; /* In MHZ */
clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
<< P0_7_CPUCLKDEV_SHIFT;
clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
@@ -157,7 +155,8 @@
tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
- __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * i);
+ __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 *
+ (pos - freq_tbl));
}
rcu_read_unlock();
@@ -166,8 +165,9 @@
static void exynos_enable_dvfs(unsigned int cur_frequency)
{
- unsigned int tmp, i, cpu;
+ unsigned int tmp, cpu;
struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
+ struct cpufreq_frequency_table *pos;
/* Disable DVFS */
__raw_writel(0, dvfs_info->base + XMU_DVFS_CTRL);
@@ -182,15 +182,15 @@
__raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
/* Set initial performance index */
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
- if (freq_table[i].frequency == cur_frequency)
+ cpufreq_for_each_entry(pos, freq_table)
+ if (pos->frequency == cur_frequency)
break;
- if (freq_table[i].frequency == CPUFREQ_TABLE_END) {
+ if (pos->frequency == CPUFREQ_TABLE_END) {
dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
/* Assign the highest frequency */
- i = 0;
- cur_frequency = freq_table[i].frequency;
+ pos = freq_table;
+ cur_frequency = pos->frequency;
}
dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
@@ -199,7 +199,7 @@
for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
- tmp |= (i << C0_3_PSTATE_NEW_SHIFT);
+ tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT);
__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
}
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 08e7bbc..8e518c6 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -21,22 +21,19 @@
int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table)
{
+ struct cpufreq_frequency_table *pos;
unsigned int min_freq = ~0;
unsigned int max_freq = 0;
- unsigned int i;
+ unsigned int freq;
- for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
- unsigned int freq = table[i].frequency;
- if (freq == CPUFREQ_ENTRY_INVALID) {
- pr_debug("table entry %u is invalid, skipping\n", i);
+ cpufreq_for_each_valid_entry(pos, table) {
+ freq = pos->frequency;
- continue;
- }
if (!cpufreq_boost_enabled()
- && (table[i].flags & CPUFREQ_BOOST_FREQ))
+ && (pos->flags & CPUFREQ_BOOST_FREQ))
continue;
- pr_debug("table entry %u: %u kHz\n", i, freq);
+ pr_debug("table entry %u: %u kHz\n", (int)(pos - table), freq);
if (freq < min_freq)
min_freq = freq;
if (freq > max_freq)
@@ -57,7 +54,8 @@
int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table)
{
- unsigned int next_larger = ~0, freq, i = 0;
+ struct cpufreq_frequency_table *pos;
+ unsigned int freq, next_larger = ~0;
bool found = false;
pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
@@ -65,9 +63,9 @@
cpufreq_verify_within_cpu_limits(policy);
- for (; freq = table[i].frequency, freq != CPUFREQ_TABLE_END; i++) {
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
+ cpufreq_for_each_valid_entry(pos, table) {
+ freq = pos->frequency;
+
if ((freq >= policy->min) && (freq <= policy->max)) {
found = true;
break;
@@ -118,7 +116,8 @@
.driver_data = ~0,
.frequency = 0,
};
- unsigned int i;
+ struct cpufreq_frequency_table *pos;
+ unsigned int freq, i = 0;
pr_debug("request for target %u kHz (relation: %u) for cpu %u\n",
target_freq, relation, policy->cpu);
@@ -132,10 +131,10 @@
break;
}
- for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
- unsigned int freq = table[i].frequency;
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
+ cpufreq_for_each_valid_entry(pos, table) {
+ freq = pos->frequency;
+
+ i = pos - table;
if ((freq < policy->min) || (freq > policy->max))
continue;
switch (relation) {
@@ -184,8 +183,7 @@
int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
unsigned int freq)
{
- struct cpufreq_frequency_table *table;
- int i;
+ struct cpufreq_frequency_table *pos, *table;
table = cpufreq_frequency_get_table(policy->cpu);
if (unlikely(!table)) {
@@ -193,10 +191,9 @@
return -ENOENT;
}
- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- if (table[i].frequency == freq)
- return i;
- }
+ cpufreq_for_each_valid_entry(pos, table)
+ if (pos->frequency == freq)
+ return pos - table;
return -EINVAL;
}
@@ -208,16 +205,13 @@
static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf,
bool show_boost)
{
- unsigned int i = 0;
ssize_t count = 0;
- struct cpufreq_frequency_table *table = policy->freq_table;
+ struct cpufreq_frequency_table *pos, *table = policy->freq_table;
if (!table)
return -ENODEV;
- for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
+ cpufreq_for_each_valid_entry(pos, table) {
/*
* show_boost = true and driver_data = BOOST freq
* display BOOST freqs
@@ -229,10 +223,10 @@
* show_boost = false and driver_data != BOOST freq
* display NON BOOST freqs
*/
- if (show_boost ^ (table[i].flags & CPUFREQ_BOOST_FREQ))
+ if (show_boost ^ (pos->flags & CPUFREQ_BOOST_FREQ))
continue;
- count += sprintf(&buf[count], "%d ", table[i].frequency);
+ count += sprintf(&buf[count], "%d ", pos->frequency);
}
count += sprintf(&buf[count], "\n");
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 0999673..6658bef 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -32,8 +32,6 @@
#include <asm/msr.h>
#include <asm/cpu_device_id.h>
-#define SAMPLE_COUNT 3
-
#define BYT_RATIOS 0x66a
#define BYT_VIDS 0x66b
#define BYT_TURBO_RATIOS 0x66c
@@ -553,14 +551,13 @@
intel_pstate_set_pstate(cpu, cpu->pstate.max_pstate);
}
-static inline void intel_pstate_calc_busy(struct cpudata *cpu,
- struct sample *sample)
+static inline void intel_pstate_calc_busy(struct cpudata *cpu)
{
+ struct sample *sample = &cpu->sample;
int32_t core_pct;
int32_t c0_pct;
- core_pct = div_fp(int_tofp((sample->aperf)),
- int_tofp((sample->mperf)));
+ core_pct = div_fp(int_tofp(sample->aperf), int_tofp(sample->mperf));
core_pct = mul_fp(core_pct, int_tofp(100));
FP_ROUNDUP(core_pct);
@@ -592,7 +589,7 @@
cpu->sample.mperf -= cpu->prev_mperf;
cpu->sample.tsc -= cpu->prev_tsc;
- intel_pstate_calc_busy(cpu, &cpu->sample);
+ intel_pstate_calc_busy(cpu);
cpu->prev_aperf = aperf;
cpu->prev_mperf = mperf;
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 5c4369b..c913906 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -530,6 +530,7 @@
static void longhaul_setup_voltagescaling(void)
{
+ struct cpufreq_frequency_table *freq_pos;
union msr_longhaul longhaul;
struct mV_pos minvid, maxvid, vid;
unsigned int j, speed, pos, kHz_step, numvscales;
@@ -608,18 +609,16 @@
/* Calculate kHz for one voltage step */
kHz_step = (highest_speed - min_vid_speed) / numvscales;
- j = 0;
- while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
- speed = longhaul_table[j].frequency;
+ cpufreq_for_each_entry(freq_pos, longhaul_table) {
+ speed = freq_pos->frequency;
if (speed > min_vid_speed)
pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
else
pos = minvid.pos;
- longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8;
+ freq_pos->driver_data |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
- speed, j, vid.mV);
- j++;
+ speed, (int)(freq_pos - longhaul_table), vid.mV);
}
can_scale_voltage = 1;
diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 84c84b5..35dd4d7 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -136,9 +136,10 @@
static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ struct cpufreq_frequency_table *pos;
const u32 *max_freqp;
u32 max_freq;
- int i, cur_astate;
+ int cur_astate;
struct resource res;
struct device_node *cpu, *dn;
int err = -ENODEV;
@@ -197,10 +198,9 @@
pr_debug("initializing frequency table\n");
/* initialize frequency table */
- for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
- pas_freqs[i].frequency =
- get_astate_freq(pas_freqs[i].driver_data) * 100000;
- pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
+ cpufreq_for_each_entry(pos, pas_freqs) {
+ pos->frequency = get_astate_freq(pos->driver_data) * 100000;
+ pr_debug("%d: %d\n", (int)(pos - pas_freqs), pos->frequency);
}
cur_astate = get_cur_astate(policy->cpu);
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index 78904e6..c8012bc 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -151,6 +151,7 @@
static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
{
+ struct cpufreq_frequency_table *pos;
unsigned int i, f;
unsigned khz;
@@ -168,12 +169,11 @@
}
}
if (param_max_multiplier) {
- for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
- if (clock_ratio[i].driver_data == param_max_multiplier) {
+ cpufreq_for_each_entry(pos, clock_ratio)
+ if (pos->driver_data == param_max_multiplier) {
max_multiplier = param_max_multiplier;
goto have_max_multiplier;
}
- }
printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
return -EINVAL;
}
@@ -201,12 +201,12 @@
param_busfreq = busfreq * 10;
/* table init */
- for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
- f = clock_ratio[i].driver_data;
+ cpufreq_for_each_entry(pos, clock_ratio) {
+ f = pos->driver_data;
if (f > max_multiplier)
- clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
else
- clock_ratio[i].frequency = busfreq * f;
+ pos->frequency = busfreq * f;
}
/* cpuinfo and default policy values */
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
index 5be8a48..5a4c5a6 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -67,9 +67,10 @@
static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ struct cpufreq_frequency_table *pos;
const u32 *max_freqp;
u32 max_freq;
- int i, cur_pmode;
+ int cur_pmode;
struct device_node *cpu;
cpu = of_get_cpu_node(policy->cpu, NULL);
@@ -102,9 +103,9 @@
pr_debug("initializing frequency table\n");
/* initialize frequency table */
- for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
- cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data;
- pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
+ cpufreq_for_each_entry(pos, cbe_freqs) {
+ pos->frequency = max_freq / pos->driver_data;
+ pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency);
}
/* if DEBUG is enabled set_pmode() measures the latency
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
index 4626f90..2fd53ea 100644
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -266,7 +266,7 @@
static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
{
int count, v, i, found;
- struct cpufreq_frequency_table *freq;
+ struct cpufreq_frequency_table *pos;
struct s3c2416_dvfs *dvfs;
count = regulator_count_voltages(s3c_freq->vddarm);
@@ -275,12 +275,11 @@
return;
}
- freq = s3c_freq->freq_table;
- while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
- if (freq->frequency == CPUFREQ_ENTRY_INVALID)
- continue;
+ if (!count)
+ goto out;
- dvfs = &s3c2416_dvfs_table[freq->driver_data];
+ cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
+ dvfs = &s3c2416_dvfs_table[pos->driver_data];
found = 0;
/* Check only the min-voltage, more is always ok on S3C2416 */
@@ -292,13 +291,12 @@
if (!found) {
pr_debug("cpufreq: %dkHz unsupported by regulator\n",
- freq->frequency);
- freq->frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency);
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
}
-
- freq++;
}
+out:
/* Guessed */
s3c_freq->regulator_latency = 1 * 1000 * 1000;
}
@@ -338,7 +336,7 @@
static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
{
struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
- struct cpufreq_frequency_table *freq;
+ struct cpufreq_frequency_table *pos;
struct clk *msysclk;
unsigned long rate;
int ret;
@@ -427,31 +425,27 @@
s3c_freq->regulator_latency = 0;
#endif
- freq = s3c_freq->freq_table;
- while (freq->frequency != CPUFREQ_TABLE_END) {
+ cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
/* special handling for dvs mode */
- if (freq->driver_data == 0) {
+ if (pos->driver_data == 0) {
if (!s3c_freq->hclk) {
pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
- freq->frequency);
- freq->frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency);
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
} else {
- freq++;
continue;
}
}
/* Check for frequencies we can generate */
rate = clk_round_rate(s3c_freq->armdiv,
- freq->frequency * 1000);
+ pos->frequency * 1000);
rate /= 1000;
- if (rate != freq->frequency) {
+ if (rate != pos->frequency) {
pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
- freq->frequency, rate);
- freq->frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency, rate);
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
}
-
- freq++;
}
/* Datasheet says PLL stabalisation time must be at least 300us,
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index ff7d3ec..176e84c 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -118,11 +118,10 @@
pr_err("Unable to check supported voltages\n");
}
- freq = s3c64xx_freq_table;
- while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
- if (freq->frequency == CPUFREQ_ENTRY_INVALID)
- continue;
+ if (!count)
+ goto out;
+ cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) {
dvfs = &s3c64xx_dvfs_table[freq->driver_data];
found = 0;
@@ -137,10 +136,9 @@
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
-
- freq++;
}
+out:
/* Guess based on having to do an I2C/SPI write; in future we
* will be able to query the regulator performance here. */
regulator_latency = 1 * 1000 * 1000;
@@ -179,8 +177,7 @@
}
#endif
- freq = s3c64xx_freq_table;
- while (freq->frequency != CPUFREQ_TABLE_END) {
+ cpufreq_for_each_entry(freq, s3c64xx_freq_table) {
unsigned long r;
/* Check for frequencies we can generate */
@@ -196,8 +193,6 @@
* frequency is the maximum we can support. */
if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
freq->frequency = CPUFREQ_ENTRY_INVALID;
-
- freq++;
}
/* Datasheet says PLL stabalisation time (if we were to use
diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
index 6723f03..7d4a315 100644
--- a/drivers/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -28,7 +28,7 @@
#include <asm/cpu_device_id.h>
#define PFX "speedstep-centrino: "
-#define MAINTAINER "cpufreq@vger.kernel.org"
+#define MAINTAINER "linux-pm@vger.kernel.org"
#define INTEL_MSR_RANGE (0xffff)
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 7694e07..b11fdd6 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -1734,18 +1734,17 @@
static long round_armss_rate(unsigned long rate)
{
+ struct cpufreq_frequency_table *pos;
long freq = 0;
- int i = 0;
/* cpufreq table frequencies is in KHz. */
rate = rate / 1000;
/* Find the corresponding arm opp from the cpufreq table. */
- while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) {
- freq = db8500_cpufreq_table[i].frequency;
+ cpufreq_for_each_entry(pos, db8500_cpufreq_table) {
+ freq = pos->frequency;
if (freq == rate)
break;
- i++;
}
/* Return the last valid value, even if a match was not found. */
@@ -1886,23 +1885,21 @@
static int set_armss_rate(unsigned long rate)
{
- int i = 0;
+ struct cpufreq_frequency_table *pos;
/* cpufreq table frequencies is in KHz. */
rate = rate / 1000;
/* Find the corresponding arm opp from the cpufreq table. */
- while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) {
- if (db8500_cpufreq_table[i].frequency == rate)
+ cpufreq_for_each_entry(pos, db8500_cpufreq_table)
+ if (pos->frequency == rate)
break;
- i++;
- }
- if (db8500_cpufreq_table[i].frequency != rate)
+ if (pos->frequency != rate)
return -EINVAL;
/* Set the new arm opp. */
- return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data);
+ return db8500_prcmu_set_arm_opp(pos->driver_data);
}
static int set_plldsi_rate(unsigned long rate)
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
index cadf52e..e3fe9a2 100644
--- a/drivers/net/irda/sh_sir.c
+++ b/drivers/net/irda/sh_sir.c
@@ -217,21 +217,17 @@
static u32 sh_sir_find_sclk(struct clk *irda_clk)
{
struct cpufreq_frequency_table *freq_table = irda_clk->freq_table;
+ struct cpufreq_frequency_table *pos;
struct clk *pclk = clk_get(NULL, "peripheral_clk");
u32 limit, min = 0xffffffff, tmp;
- int i, index = 0;
+ int index = 0;
limit = clk_get_rate(pclk);
clk_put(pclk);
/* IrDA can not set over peripheral_clk */
- for (i = 0;
- freq_table[i].frequency != CPUFREQ_TABLE_END;
- i++) {
- u32 freq = freq_table[i].frequency;
-
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
+ cpufreq_for_each_valid_entry(pos, freq_table) {
+ u32 freq = pos->frequency;
/* IrDA should not over peripheral_clk */
if (freq > limit)
@@ -240,7 +236,7 @@
tmp = freq % SCLK_BASE;
if (tmp < min) {
min = tmp;
- index = i;
+ index = pos - freq_table;
}
}
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 7472785..be56b22 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -196,17 +196,11 @@
struct cpufreq_frequency_table *freq_table,
unsigned long rate)
{
- int i;
+ struct cpufreq_frequency_table *pos;
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
- unsigned long freq = freq_table[i].frequency;
-
- if (freq == CPUFREQ_ENTRY_INVALID)
- continue;
-
- if (freq == rate)
- return i;
- }
+ cpufreq_for_each_valid_entry(pos, freq_table)
+ if (pos->frequency == rate)
+ return pos - freq_table;
return -ENOENT;
}
@@ -575,11 +569,7 @@
return abs(target - *best_freq);
}
- for (freq = parent->freq_table; freq->frequency != CPUFREQ_TABLE_END;
- freq++) {
- if (freq->frequency == CPUFREQ_ENTRY_INVALID)
- continue;
-
+ cpufreq_for_each_valid_entry(freq, parent->freq_table) {
if (unlikely(freq->frequency / target <= div_min - 1)) {
unsigned long freq_max;
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 4246262..84a75f8 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -144,11 +144,11 @@
unsigned int *output,
enum cpufreq_cooling_property property)
{
- int i, j;
+ int i;
unsigned long max_level = 0, level = 0;
unsigned int freq = CPUFREQ_ENTRY_INVALID;
int descend = -1;
- struct cpufreq_frequency_table *table =
+ struct cpufreq_frequency_table *pos, *table =
cpufreq_frequency_get_table(cpu);
if (!output)
@@ -157,20 +157,16 @@
if (!table)
return -EINVAL;
- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- /* ignore invalid entries */
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
-
+ cpufreq_for_each_valid_entry(pos, table) {
/* ignore duplicate entry */
- if (freq == table[i].frequency)
+ if (freq == pos->frequency)
continue;
/* get the frequency order */
if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
- descend = !!(freq > table[i].frequency);
+ descend = freq > pos->frequency;
- freq = table[i].frequency;
+ freq = pos->frequency;
max_level++;
}
@@ -190,29 +186,26 @@
if (property == GET_FREQ)
level = descend ? input : (max_level - input);
- for (i = 0, j = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- /* ignore invalid entry */
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
-
+ i = 0;
+ cpufreq_for_each_valid_entry(pos, table) {
/* ignore duplicate entry */
- if (freq == table[i].frequency)
+ if (freq == pos->frequency)
continue;
/* now we have a valid frequency entry */
- freq = table[i].frequency;
+ freq = pos->frequency;
if (property == GET_LEVEL && (unsigned int)input == freq) {
/* get level by frequency */
- *output = descend ? j : (max_level - j);
+ *output = descend ? i : (max_level - i);
return 0;
}
- if (property == GET_FREQ && level == j) {
+ if (property == GET_FREQ && level == i) {
/* get frequency by level */
*output = freq;
return 0;
}
- j++;
+ i++;
}
return -EINVAL;
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 5ae5100..9d803b5 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -110,6 +110,7 @@
bool transition_ongoing; /* Tracks transition status */
spinlock_t transition_lock;
wait_queue_head_t transition_wait;
+ struct task_struct *transition_task; /* Task which is doing the transition */
};
/* Only for ACPI */
@@ -468,6 +469,48 @@
* order */
};
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
+int dev_pm_opp_init_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table);
+void dev_pm_opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table);
+#else
+static inline int dev_pm_opp_init_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table
+ **table)
+{
+ return -EINVAL;
+}
+
+static inline void dev_pm_opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table
+ **table)
+{
+}
+#endif
+
+
+bool cpufreq_next_valid(struct cpufreq_frequency_table **pos);
+
+/*
+ * cpufreq_for_each_entry - iterate over a cpufreq_frequency_table
+ * @pos: the cpufreq_frequency_table * to use as a loop cursor.
+ * @table: the cpufreq_frequency_table * to iterate over.
+ */
+
+#define cpufreq_for_each_entry(pos, table) \
+ for (pos = table; pos->frequency != CPUFREQ_TABLE_END; pos++)
+
+/*
+ * cpufreq_for_each_valid_entry - iterate over a cpufreq_frequency_table
+ * excluding CPUFREQ_ENTRY_INVALID frequencies.
+ * @pos: the cpufreq_frequency_table * to use as a loop cursor.
+ * @table: the cpufreq_frequency_table * to iterate over.
+ */
+
+#define cpufreq_for_each_valid_entry(pos, table) \
+ for (pos = table; cpufreq_next_valid(&pos); pos++)
+
int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 5151b00..0330217 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -15,7 +15,6 @@
#define __LINUX_OPP_H__
#include <linux/err.h>
-#include <linux/cpufreq.h>
#include <linux/notifier.h>
struct dev_pm_opp;
@@ -117,23 +116,4 @@
}
#endif
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
-int dev_pm_opp_init_cpufreq_table(struct device *dev,
- struct cpufreq_frequency_table **table);
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
- struct cpufreq_frequency_table **table);
-#else
-static inline int dev_pm_opp_init_cpufreq_table(struct device *dev,
- struct cpufreq_frequency_table **table)
-{
- return -EINVAL;
-}
-
-static inline
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
- struct cpufreq_frequency_table **table)
-{
-}
-#endif /* CONFIG_CPU_FREQ */
-
#endif /* __LINUX_OPP_H__ */
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index cbfec92..3651db7 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -62,7 +62,7 @@
LIB_MIN= 0
PACKAGE = cpupower
-PACKAGE_BUGREPORT = cpufreq@vger.kernel.org
+PACKAGE_BUGREPORT = linux-pm@vger.kernel.org
LANGUAGES = de fr it cs pt
diff --git a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
index 0f10b81..5224ee5 100644
--- a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
+++ b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
@@ -18,7 +18,7 @@
* 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the
* TSC-based delay routine on the Linux kernel does not correctly
* handle the cpufreq transition. Please report this to
- * cpufreq@vger.kernel.org
+ * linux-pm@vger.kernel.org
*/
#include <linux/kernel.h>