| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| |
| #include <net/mac80211.h> |
| #include "fw-api.h" |
| #include "mvm.h" |
| |
| /* Maps the driver specific channel width definition to the the fw values */ |
| static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef) |
| { |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| case NL80211_CHAN_WIDTH_20: |
| return PHY_VHT_CHANNEL_MODE20; |
| case NL80211_CHAN_WIDTH_40: |
| return PHY_VHT_CHANNEL_MODE40; |
| case NL80211_CHAN_WIDTH_80: |
| return PHY_VHT_CHANNEL_MODE80; |
| case NL80211_CHAN_WIDTH_160: |
| return PHY_VHT_CHANNEL_MODE160; |
| default: |
| WARN(1, "Invalid channel width=%u", chandef->width); |
| return PHY_VHT_CHANNEL_MODE20; |
| } |
| } |
| |
| /* |
| * Maps the driver specific control channel position (relative to the center |
| * freq) definitions to the the fw values |
| */ |
| static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef) |
| { |
| switch (chandef->chan->center_freq - chandef->center_freq1) { |
| case -70: |
| return PHY_VHT_CTRL_POS_4_BELOW; |
| case -50: |
| return PHY_VHT_CTRL_POS_3_BELOW; |
| case -30: |
| return PHY_VHT_CTRL_POS_2_BELOW; |
| case -10: |
| return PHY_VHT_CTRL_POS_1_BELOW; |
| case 10: |
| return PHY_VHT_CTRL_POS_1_ABOVE; |
| case 30: |
| return PHY_VHT_CTRL_POS_2_ABOVE; |
| case 50: |
| return PHY_VHT_CTRL_POS_3_ABOVE; |
| case 70: |
| return PHY_VHT_CTRL_POS_4_ABOVE; |
| default: |
| WARN(1, "Invalid channel definition"); |
| case 0: |
| /* |
| * The FW is expected to check the control channel position only |
| * when in HT/VHT and the channel width is not 20MHz. Return |
| * this value as the default one. |
| */ |
| return PHY_VHT_CTRL_POS_1_BELOW; |
| } |
| } |
| |
| /* |
| * Construct the generic fields of the PHY context command |
| */ |
| static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt, |
| struct iwl_phy_context_cmd *cmd, |
| u32 action, u32 apply_time) |
| { |
| memset(cmd, 0, sizeof(struct iwl_phy_context_cmd)); |
| |
| cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id, |
| ctxt->color)); |
| cmd->action = cpu_to_le32(action); |
| cmd->apply_time = cpu_to_le32(apply_time); |
| } |
| |
| /* |
| * Add the phy configuration to the PHY context command |
| */ |
| static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm, |
| struct iwl_phy_context_cmd *cmd, |
| struct cfg80211_chan_def *chandef, |
| u8 chains_static, u8 chains_dynamic) |
| { |
| u8 active_cnt, idle_cnt; |
| |
| /* Set the channel info data */ |
| cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ? |
| PHY_BAND_24 : PHY_BAND_5); |
| |
| cmd->ci.channel = chandef->chan->hw_value; |
| cmd->ci.width = iwl_mvm_get_channel_width(chandef); |
| cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef); |
| |
| /* Set rx the chains */ |
| idle_cnt = chains_static; |
| active_cnt = chains_dynamic; |
| |
| cmd->rxchain_info = cpu_to_le32(mvm->fw->valid_rx_ant << |
| PHY_RX_CHAIN_VALID_POS); |
| cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS); |
| cmd->rxchain_info |= cpu_to_le32(active_cnt << |
| PHY_RX_CHAIN_MIMO_CNT_POS); |
| |
| cmd->txchain_info = cpu_to_le32(mvm->fw->valid_tx_ant); |
| } |
| |
| /* |
| * Send a command to apply the current phy configuration. The command is send |
| * only if something in the configuration changed: in case that this is the |
| * first time that the phy configuration is applied or in case that the phy |
| * configuration changed from the previous apply. |
| */ |
| static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm, |
| struct iwl_mvm_phy_ctxt *ctxt, |
| struct cfg80211_chan_def *chandef, |
| u8 chains_static, u8 chains_dynamic, |
| u32 action, u32 apply_time) |
| { |
| struct iwl_phy_context_cmd cmd; |
| int ret; |
| |
| /* Set the command header fields */ |
| iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time); |
| |
| /* Set the command data */ |
| iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef, |
| chains_static, chains_dynamic); |
| |
| ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC, |
| sizeof(struct iwl_phy_context_cmd), |
| &cmd); |
| if (ret) |
| IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Send a command to add a PHY context based on the current HW configuration. |
| */ |
| int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, |
| struct cfg80211_chan_def *chandef, |
| u8 chains_static, u8 chains_dynamic) |
| { |
| int ret; |
| |
| WARN_ON(!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) && |
| ctxt->ref); |
| lockdep_assert_held(&mvm->mutex); |
| |
| ctxt->channel = chandef->chan; |
| ret = iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef, |
| chains_static, chains_dynamic, |
| FW_CTXT_ACTION_ADD, 0); |
| |
| return ret; |
| } |
| |
| /* |
| * Update the number of references to the given PHY context. This is valid only |
| * in case the PHY context was already created, i.e., its reference count > 0. |
| */ |
| void iwl_mvm_phy_ctxt_ref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt) |
| { |
| lockdep_assert_held(&mvm->mutex); |
| ctxt->ref++; |
| } |
| |
| /* |
| * Send a command to modify the PHY context based on the current HW |
| * configuration. Note that the function does not check that the configuration |
| * changed. |
| */ |
| int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt, |
| struct cfg80211_chan_def *chandef, |
| u8 chains_static, u8 chains_dynamic) |
| { |
| lockdep_assert_held(&mvm->mutex); |
| |
| ctxt->channel = chandef->chan; |
| return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef, |
| chains_static, chains_dynamic, |
| FW_CTXT_ACTION_MODIFY, 0); |
| } |
| |
| void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt) |
| { |
| lockdep_assert_held(&mvm->mutex); |
| |
| if (WARN_ON_ONCE(!ctxt)) |
| return; |
| |
| ctxt->ref--; |
| } |