Merge tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
Pull tegra clk driver updates from Thierry Reding:
Fixes and enhancements mostly for Tegra210 clocks that allow DSI and
HDMI to work on Tegra X1. There's also a refactoring, including fixes,
the USB PLL.
* tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: Initialize UTMI PLL when enabling PLLU
clk: tegra: Micro-optimize Tegra210 clock setup
clk: tegra: Make sor_safe the parent of dpaux and dpaux1
clk: tegra: Mark timer clock as critical
clk: tegra: Enable sor1 and sor1_src on Tegra210
clk: tegra: Squash sor1 safe/brick/src into a single mux
clk: tegra: Disable spread spectrum on pll_d2
clk: tegra: Fixup post dividers on Tegra210
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 36c9749..5738635 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -238,7 +238,6 @@
tegra_clk_sor0,
tegra_clk_sor0_lvds,
tegra_clk_sor1,
- tegra_clk_sor1_brick,
tegra_clk_sor1_src,
tegra_clk_spdif,
tegra_clk_spdif_2x,
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 4e194ec..b385536 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -191,6 +191,53 @@
#define PLLSS_REF_SRC_SEL_SHIFT 25
#define PLLSS_REF_SRC_SEL_MASK (3 << PLLSS_REF_SRC_SEL_SHIFT)
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25)
+#define UTMIP_PLL_CFG2_PHY_XTAL_CLOCKEN BIT(30)
+
+#define UTMIPLL_HW_PWRDN_CFG0 0x52c
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
+#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
+#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
+
+#define PLLU_HW_PWRDN_CFG0 0x530
+#define PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL BIT(0)
+#define PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
+#define PLLU_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
+#define PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT BIT(7)
+#define PLLU_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
+#define PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE BIT(28)
+
+#define XUSB_PLL_CFG0 0x534
+#define XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY 0x3ff
+#define XUSB_PLL_CFG0_PLLU_LOCK_DLY (0x3ff << 14)
+
+#define PLLU_BASE_CLKENABLE_USB BIT(21)
+#define PLLU_BASE_OVERRIDE BIT(24)
+
#define pll_readl(offset, p) readl_relaxed(p->clk_base + offset)
#define pll_readl_base(p) pll_readl(p->params->base_reg, p)
#define pll_readl_misc(p) pll_readl(p->params->misc_reg, p)
@@ -973,6 +1020,133 @@
.enable = clk_plle_enable,
};
+/*
+ * Structure defining the fields for USB UTMI clocks Parameters.
+ */
+struct utmi_clk_param {
+ /* Oscillator Frequency in Hz */
+ u32 osc_frequency;
+ /* UTMIP PLL Enable Delay Count */
+ u8 enable_delay_count;
+ /* UTMIP PLL Stable count */
+ u8 stable_count;
+ /* UTMIP PLL Active delay count */
+ u8 active_delay_count;
+ /* UTMIP PLL Xtal frequency count */
+ u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+ {
+ .osc_frequency = 13000000, .enable_delay_count = 0x02,
+ .stable_count = 0x33, .active_delay_count = 0x05,
+ .xtal_freq_count = 0x7f
+ }, {
+ .osc_frequency = 19200000, .enable_delay_count = 0x03,
+ .stable_count = 0x4b, .active_delay_count = 0x06,
+ .xtal_freq_count = 0xbb
+ }, {
+ .osc_frequency = 12000000, .enable_delay_count = 0x02,
+ .stable_count = 0x2f, .active_delay_count = 0x04,
+ .xtal_freq_count = 0x76
+ }, {
+ .osc_frequency = 26000000, .enable_delay_count = 0x04,
+ .stable_count = 0x66, .active_delay_count = 0x09,
+ .xtal_freq_count = 0xfe
+ }, {
+ .osc_frequency = 16800000, .enable_delay_count = 0x03,
+ .stable_count = 0x41, .active_delay_count = 0x0a,
+ .xtal_freq_count = 0xa4
+ }, {
+ .osc_frequency = 38400000, .enable_delay_count = 0x0,
+ .stable_count = 0x0, .active_delay_count = 0x6,
+ .xtal_freq_count = 0x80
+ },
+};
+
+static int clk_pllu_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct clk_hw *pll_ref = clk_hw_get_parent(hw);
+ struct clk_hw *osc = clk_hw_get_parent(pll_ref);
+ const struct utmi_clk_param *params = NULL;
+ unsigned long flags = 0, input_rate;
+ unsigned int i;
+ int ret = 0;
+ u32 value;
+
+ if (!osc) {
+ pr_err("%s: failed to get OSC clock\n", __func__);
+ return -EINVAL;
+ }
+
+ input_rate = clk_hw_get_rate(osc);
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_enable(hw);
+
+ ret = clk_pll_wait_for_lock(pll);
+ if (ret < 0)
+ goto out;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (input_rate == utmi_parameters[i].osc_frequency) {
+ params = &utmi_parameters[i];
+ break;
+ }
+ }
+
+ if (!params) {
+ pr_err("%s: unexpected input rate %lu Hz\n", __func__,
+ input_rate);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ value = pll_readl_base(pll);
+ value &= ~PLLU_BASE_OVERRIDE;
+ pll_writel_base(value, pll);
+
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2);
+ /* Program UTMIP PLL stable and active counts */
+ value &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ value |= UTMIP_PLL_CFG2_STABLE_COUNT(params->stable_count);
+ value &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+ value |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(params->active_delay_count);
+ /* Remove power downs from UTMIP PLL control bits */
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2);
+
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1);
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ value &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+ value |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(params->enable_delay_count);
+ value &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ value |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(params->xtal_freq_count);
+ /* Remove power downs from UTMIP PLL control bits */
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1);
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static const struct clk_ops tegra_clk_pllu_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pllu_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+};
+
static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
unsigned long parent_rate)
{
@@ -1505,6 +1679,112 @@
if (pll->lock)
spin_unlock_irqrestore(pll->lock, flags);
}
+
+static int clk_pllu_tegra114_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ const struct utmi_clk_param *params = NULL;
+ struct clk *osc = __clk_lookup("osc");
+ unsigned long flags = 0, input_rate;
+ unsigned int i;
+ int ret = 0;
+ u32 value;
+
+ if (!osc) {
+ pr_err("%s: failed to get OSC clock\n", __func__);
+ return -EINVAL;
+ }
+
+ input_rate = clk_hw_get_rate(__clk_get_hw(osc));
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_enable(hw);
+
+ ret = clk_pll_wait_for_lock(pll);
+ if (ret < 0)
+ goto out;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (input_rate == utmi_parameters[i].osc_frequency) {
+ params = &utmi_parameters[i];
+ break;
+ }
+ }
+
+ if (!params) {
+ pr_err("%s: unexpected input rate %lu Hz\n", __func__,
+ input_rate);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ value = pll_readl_base(pll);
+ value &= ~PLLU_BASE_OVERRIDE;
+ pll_writel_base(value, pll);
+
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2);
+ /* Program UTMIP PLL stable and active counts */
+ value &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ value |= UTMIP_PLL_CFG2_STABLE_COUNT(params->stable_count);
+ value &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+ value |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(params->active_delay_count);
+ /* Remove power downs from UTMIP PLL control bits */
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2);
+
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1);
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ value &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+ value |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(params->enable_delay_count);
+ value &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ value |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(params->xtal_freq_count);
+ /* Remove power downs from UTMIP PLL control bits */
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1);
+
+ /* Setup HW control of UTMIPLL */
+ value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ value |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
+ value &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
+ value |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
+ writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1);
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1);
+
+ udelay(1);
+
+ /*
+ * Setup SW override of UTMIPLL assuming USB2.0 ports are assigned
+ * to USB2
+ */
+ value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ value |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
+ value &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
+ writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ udelay(1);
+
+ /* Enable HW control of UTMIPLL */
+ value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ value |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
+ writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
#endif
static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base,
@@ -1614,6 +1894,27 @@
return clk;
}
+struct clk *tegra_clk_register_pllu(const char *name, const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_params->flags |= TEGRA_PLLU;
+
+ pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllu_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
#if defined(CONFIG_ARCH_TEGRA_114_SOC) || \
defined(CONFIG_ARCH_TEGRA_124_SOC) || \
defined(CONFIG_ARCH_TEGRA_132_SOC) || \
@@ -1652,6 +1953,12 @@
.recalc_rate = clk_pll_recalc_rate,
};
+static const struct clk_ops tegra_clk_pllu_tegra114_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pllu_tegra114_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+};
struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
@@ -1919,6 +2226,29 @@
return clk;
}
+
+struct clk *
+tegra_clk_register_pllu_tegra114(const char *name, const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_params->flags |= TEGRA_PLLU;
+
+ pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllu_tegra114_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
#endif
#if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC)
@@ -2187,6 +2517,152 @@
return val & PLLE_BASE_ENABLE ? 1 : 0;
}
+static int clk_pllu_tegra210_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct clk_hw *pll_ref = clk_hw_get_parent(hw);
+ struct clk_hw *osc = clk_hw_get_parent(pll_ref);
+ const struct utmi_clk_param *params = NULL;
+ unsigned long flags = 0, input_rate;
+ unsigned int i;
+ int ret = 0;
+ u32 value;
+
+ if (!osc) {
+ pr_err("%s: failed to get OSC clock\n", __func__);
+ return -EINVAL;
+ }
+
+ input_rate = clk_hw_get_rate(osc);
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_enable(hw);
+
+ ret = clk_pll_wait_for_lock(pll);
+ if (ret < 0)
+ goto out;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (input_rate == utmi_parameters[i].osc_frequency) {
+ params = &utmi_parameters[i];
+ break;
+ }
+ }
+
+ if (!params) {
+ pr_err("%s: unexpected input rate %lu Hz\n", __func__,
+ input_rate);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ value = pll_readl_base(pll);
+ value &= ~PLLU_BASE_OVERRIDE;
+ pll_writel_base(value, pll);
+
+ /* Put PLLU under HW control */
+ value = readl_relaxed(pll->clk_base + PLLU_HW_PWRDN_CFG0);
+ value |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE |
+ PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT |
+ PLLU_HW_PWRDN_CFG0_USE_LOCKDET;
+ value &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL |
+ PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL);
+ writel_relaxed(value, pll->clk_base + PLLU_HW_PWRDN_CFG0);
+
+ value = readl_relaxed(pll->clk_base + XUSB_PLL_CFG0);
+ value &= ~XUSB_PLL_CFG0_PLLU_LOCK_DLY;
+ writel_relaxed(value, pll->clk_base + XUSB_PLL_CFG0);
+
+ udelay(1);
+
+ value = readl_relaxed(pll->clk_base + PLLU_HW_PWRDN_CFG0);
+ value |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE;
+ writel_relaxed(value, pll->clk_base + PLLU_HW_PWRDN_CFG0);
+
+ udelay(1);
+
+ /* Disable PLLU clock branch to UTMIPLL since it uses OSC */
+ value = pll_readl_base(pll);
+ value &= ~PLLU_BASE_CLKENABLE_USB;
+ pll_writel_base(value, pll);
+
+ value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ if (value & UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE) {
+ pr_debug("UTMIPLL already enabled\n");
+ goto out;
+ }
+
+ value &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
+ writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ /* Program UTMIP PLL stable and active counts */
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2);
+ value &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ value |= UTMIP_PLL_CFG2_STABLE_COUNT(params->stable_count);
+ value &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+ value |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(params->active_delay_count);
+ value |= UTMIP_PLL_CFG2_PHY_XTAL_CLOCKEN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1);
+ value &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+ value |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(params->enable_delay_count);
+ value &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ value |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(params->xtal_freq_count);
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1);
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ value |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
+ writel(value, pll->clk_base + UTMIP_PLL_CFG1);
+
+ udelay(1);
+
+ /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG2);
+ value |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP;
+ value |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP;
+ value |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ value &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG2);
+
+ /* Setup HW control of UTMIPLL */
+ value = readl_relaxed(pll->clk_base + UTMIP_PLL_CFG1);
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
+ value &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ writel_relaxed(value, pll->clk_base + UTMIP_PLL_CFG1);
+
+ value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ value |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
+ value &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
+ writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ udelay(1);
+
+ value = readl_relaxed(pll->clk_base + XUSB_PLL_CFG0);
+ value &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY;
+ writel_relaxed(value, pll->clk_base + XUSB_PLL_CFG0);
+
+ udelay(1);
+
+ /* Enable HW control of UTMIPLL */
+ value = readl_relaxed(pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ value |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
+ writel_relaxed(value, pll->clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
static const struct clk_ops tegra_clk_plle_tegra210_ops = {
.is_enabled = clk_plle_tegra210_is_enabled,
.enable = clk_plle_tegra210_enable,
@@ -2194,6 +2670,13 @@
.recalc_rate = clk_pll_recalc_rate,
};
+static const struct clk_ops tegra_clk_pllu_tegra210_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pllu_tegra210_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pllre_recalc_rate,
+};
+
struct clk *tegra_clk_register_plle_tegra210(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
@@ -2434,4 +2917,26 @@
return clk;
}
+
+struct clk *tegra_clk_register_pllu_tegra210(const char *name,
+ const char *parent_name, void __iomem *clk_base,
+ unsigned long flags, struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_params->flags |= TEGRA_PLLU;
+
+ pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllu_tegra210_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
#endif
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 29d04c6..4ce4e7f 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -594,15 +594,17 @@
[0] = 0, [1] = 2, [2] = 5, [3] = 6
};
-static const char *mux_plldp_sor1_src[] = {
- "pll_dp", "clk_sor1_src"
+static const char *mux_sor_safe_sor1_brick_sor1_src[] = {
+ /*
+ * Bit 0 of the mux selects sor1_brick, irrespective of bit 1, so the
+ * sor1_brick parent appears twice in the list below. This is merely
+ * to support clk_get_parent() if firmware happened to set these bits
+ * to 0b11. While not an invalid setting, code should always set the
+ * bits to 0b01 to select sor1_brick.
+ */
+ "sor_safe", "sor1_brick", "sor1_src", "sor1_brick"
};
-#define mux_plldp_sor1_src_idx NULL
-
-static const char *mux_clkm_sor1_brick_sor1_src[] = {
- "clk_m", "sor1_brick", "sor1_src", "sor1_brick"
-};
-#define mux_clkm_sor1_brick_sor1_src_idx NULL
+#define mux_sor_safe_sor1_brick_sor1_src_idx NULL
static const char *mux_pllp_pllre_clkm[] = {
"pll_p", "pll_re_out1", "clk_m"
@@ -778,8 +780,7 @@
MUX8("nvjpg", mux_pllc2_c_c3_pllp_plla1_clkm, CLK_SOURCE_NVJPG, 195, 0, tegra_clk_nvjpg),
MUX8("ape", mux_plla_pllc4_out0_pllc_pllc4_out1_pllp_pllc4_out2_clkm, CLK_SOURCE_APE, 198, TEGRA_PERIPH_ON_APB, tegra_clk_ape),
MUX8_NOGATE_LOCK("sor1_src", mux_pllp_plld_plld2_clkm, CLK_SOURCE_SOR1, tegra_clk_sor1_src, &sor1_lock),
- NODIV("sor1_brick", mux_plldp_sor1_src, CLK_SOURCE_SOR1, 14, MASK(1), 183, 0, tegra_clk_sor1_brick, &sor1_lock),
- NODIV("sor1", mux_clkm_sor1_brick_sor1_src, CLK_SOURCE_SOR1, 15, MASK(1), 183, 0, tegra_clk_sor1, &sor1_lock),
+ NODIV("sor1", mux_sor_safe_sor1_brick_sor1_src, CLK_SOURCE_SOR1, 14, MASK(2), 183, 0, tegra_clk_sor1, &sor1_lock),
MUX8("sdmmc_legacy", mux_pllp_out3_clkm_pllp_pllc4, CLK_SOURCE_SDMMC_LEGACY, 193, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_sdmmc_legacy),
MUX8("qspi", mux_pllp_pllc_pllc_out1_pllc4_out2_pllc4_out1_clkm_pllc4_out0, CLK_SOURCE_QSPI, 211, TEGRA_PERIPH_ON_APB, tegra_clk_qspi),
I2C("vii2c", mux_pllp_pllc_clkm, CLK_SOURCE_VI_I2C, 208, tegra_clk_vi_i2c),
@@ -791,7 +792,7 @@
static struct tegra_periph_init_data gate_clks[] = {
GATE("rtc", "clk_32k", 4, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_rtc, 0),
- GATE("timer", "clk_m", 5, 0, tegra_clk_timer, 0),
+ GATE("timer", "clk_m", 5, 0, tegra_clk_timer, CLK_IS_CRITICAL),
GATE("isp", "clk_m", 23, 0, tegra_clk_isp, 0),
GATE("vcp", "clk_m", 29, 0, tegra_clk_vcp, 0),
GATE("apbdma", "clk_m", 34, 0, tegra_clk_apbdma, 0),
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index b78054f..64da7b7 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -113,32 +113,6 @@
#define CCLKG_BURST_POLICY 0x368
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-
-#define UTMIPLL_HW_PWRDN_CFG0 0x52c
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
-#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
-#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
-
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
@@ -649,43 +623,6 @@
#define MASK(x) (BIT(x) - 1)
-struct utmi_clk_param {
- /* Oscillator Frequency in KHz */
- u32 osc_frequency;
- /* UTMIP PLL Enable Delay Count */
- u8 enable_delay_count;
- /* UTMIP PLL Stable count */
- u8 stable_count;
- /* UTMIP PLL Active delay count */
- u8 active_delay_count;
- /* UTMIP PLL Xtal frequency count */
- u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
- {
- .osc_frequency = 13000000, .enable_delay_count = 0x02,
- .stable_count = 0x33, .active_delay_count = 0x05,
- .xtal_freq_count = 0x7f
- }, {
- .osc_frequency = 19200000, .enable_delay_count = 0x03,
- .stable_count = 0x4b, .active_delay_count = 0x06,
- .xtal_freq_count = 0xbb
- }, {
- .osc_frequency = 12000000, .enable_delay_count = 0x02,
- .stable_count = 0x2f, .active_delay_count = 0x04,
- .xtal_freq_count = 0x76
- }, {
- .osc_frequency = 26000000, .enable_delay_count = 0x04,
- .stable_count = 0x66, .active_delay_count = 0x09,
- .xtal_freq_count = 0xfe
- }, {
- .osc_frequency = 16800000, .enable_delay_count = 0x03,
- .stable_count = 0x41, .active_delay_count = 0x0a,
- .xtal_freq_count = 0xa4
- },
-};
-
/* peripheral mux definitions */
static const char *mux_plld_out0_plld2_out0[] = {
@@ -986,92 +923,9 @@
}
-static __init void tegra114_utmi_param_configure(void __iomem *clk_base)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
- if (osc_freq == utmi_parameters[i].osc_frequency)
- break;
- }
-
- if (i >= ARRAY_SIZE(utmi_parameters)) {
- pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
- osc_freq);
- return;
- }
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL stable and active counts */
- /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
- reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
- reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
-
- reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
- active_delay_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL delay and oscillator frequency counts */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
- enable_delay_count);
-
- reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
- reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
- xtal_freq_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- /* Setup HW control of UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- udelay(1);
-
- /* Setup SW override of UTMIPLL assuming USB2.0
- ports are assigned to USB2 */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- udelay(1);
-
- /* Enable HW control UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-}
-
static void __init tegra114_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
- u32 val;
struct clk *clk;
/* PLLC */
@@ -1118,16 +972,10 @@
CLK_SET_RATE_PARENT, 1, 1);
/* PLLU */
- val = readl(clk_base + pll_u_params.base_reg);
- val &= ~BIT(24); /* disable PLLU_OVERRIDE */
- writel(val, clk_base + pll_u_params.base_reg);
-
- clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
- &pll_u_params, &pll_u_lock);
+ clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
+ &pll_u_params, &pll_u_lock);
clks[TEGRA114_CLK_PLL_U] = clk;
- tegra114_utmi_param_configure(clk_base);
-
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index f4fbbf1..a112d3d 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -99,32 +99,6 @@
#define CCLKG_BURST_POLICY 0x368
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-
-#define UTMIPLL_HW_PWRDN_CFG0 0x52c
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
-#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
-#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
-#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
-#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
-
/* Tegra CPU clock and reset control regs */
#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
@@ -764,43 +738,6 @@
TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
};
-struct utmi_clk_param {
- /* Oscillator Frequency in KHz */
- u32 osc_frequency;
- /* UTMIP PLL Enable Delay Count */
- u8 enable_delay_count;
- /* UTMIP PLL Stable count */
- u8 stable_count;
- /* UTMIP PLL Active delay count */
- u8 active_delay_count;
- /* UTMIP PLL Xtal frequency count */
- u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
- {
- .osc_frequency = 13000000, .enable_delay_count = 0x02,
- .stable_count = 0x33, .active_delay_count = 0x05,
- .xtal_freq_count = 0x7f
- }, {
- .osc_frequency = 19200000, .enable_delay_count = 0x03,
- .stable_count = 0x4b, .active_delay_count = 0x06,
- .xtal_freq_count = 0xbb
- }, {
- .osc_frequency = 12000000, .enable_delay_count = 0x02,
- .stable_count = 0x2f, .active_delay_count = 0x04,
- .xtal_freq_count = 0x76
- }, {
- .osc_frequency = 26000000, .enable_delay_count = 0x04,
- .stable_count = 0x66, .active_delay_count = 0x09,
- .xtal_freq_count = 0xfe
- }, {
- .osc_frequency = 16800000, .enable_delay_count = 0x03,
- .stable_count = 0x41, .active_delay_count = 0x0a,
- .xtal_freq_count = 0xa4
- },
-};
-
static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
@@ -1063,88 +1000,6 @@
static struct clk **clks;
-static void tegra124_utmi_param_configure(void __iomem *clk_base)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
- if (osc_freq == utmi_parameters[i].osc_frequency)
- break;
- }
-
- if (i >= ARRAY_SIZE(utmi_parameters)) {
- pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
- osc_freq);
- return;
- }
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL stable and active counts */
- /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
- reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
- reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
-
- reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
- active_delay_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL delay and oscillator frequency counts */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
- enable_delay_count);
-
- reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
- reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
- xtal_freq_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- /* Setup HW control of UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- udelay(1);
-
- /* Setup SW override of UTMIPLL assuming USB2.0
- ports are assigned to USB2 */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- udelay(1);
-
- /* Enable HW control UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-}
-
static __init void tegra124_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
@@ -1195,7 +1050,6 @@
static void __init tegra124_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
- u32 val;
struct clk *clk;
/* PLLC */
@@ -1256,17 +1110,11 @@
clks[TEGRA124_CLK_PLL_M_UD] = clk;
/* PLLU */
- val = readl(clk_base + pll_u_params.base_reg);
- val &= ~BIT(24); /* disable PLLU_OVERRIDE */
- writel(val, clk_base + pll_u_params.base_reg);
-
- clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
- &pll_u_params, &pll_u_lock);
+ clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
+ &pll_u_params, &pll_u_lock);
clk_register_clkdev(clk, "pll_u", NULL);
clks[TEGRA124_CLK_PLL_U] = clk;
- tegra124_utmi_param_configure(clk_base);
-
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 456cf58..2896d2e 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -155,27 +155,6 @@
#define PMC_PLLM_WB0_OVERRIDE 0x1dc
#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-
#define SATA_PLL_CFG0 0x490
#define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0)
#define SATA_PLL_CFG0_PADPLL_USE_LOCKDET BIT(2)
@@ -1366,9 +1345,9 @@
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
/* 1 GHz */
- { 12000000, 1000000000, 166, 1, 1, 0 }, /* actual: 996.0 MHz */
- { 13000000, 1000000000, 153, 1, 1, 0 }, /* actual: 994.0 MHz */
- { 38400000, 1000000000, 156, 3, 1, 0 }, /* actual: 998.4 MHz */
+ { 12000000, 1000000000, 166, 1, 2, 0 }, /* actual: 996.0 MHz */
+ { 13000000, 1000000000, 153, 1, 2, 0 }, /* actual: 994.0 MHz */
+ { 38400000, 1000000000, 156, 3, 2, 0 }, /* actual: 998.4 MHz */
{ 0, 0, 0, 0, 0, 0 },
};
@@ -1417,9 +1396,9 @@
};
static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = {
- { 12000000, 510000000, 85, 1, 1, 0 },
- { 13000000, 510000000, 78, 1, 1, 0 }, /* actual: 507.0 MHz */
- { 38400000, 510000000, 79, 3, 1, 0 }, /* actual: 505.6 MHz */
+ { 12000000, 510000000, 85, 1, 2, 0 },
+ { 13000000, 510000000, 78, 1, 2, 0 }, /* actual: 507.0 MHz */
+ { 38400000, 510000000, 79, 3, 2, 0 }, /* actual: 505.6 MHz */
{ 0, 0, 0, 0, 0, 0 },
};
@@ -1532,9 +1511,9 @@
};
static struct tegra_clk_pll_freq_table pll_c4_vco_freq_table[] = {
- { 12000000, 600000000, 50, 1, 0, 0 },
- { 13000000, 600000000, 46, 1, 0, 0 }, /* actual: 598.0 MHz */
- { 38400000, 600000000, 62, 4, 0, 0 }, /* actual: 595.2 MHz */
+ { 12000000, 600000000, 50, 1, 1, 0 },
+ { 13000000, 600000000, 46, 1, 1, 0 }, /* actual: 598.0 MHz */
+ { 38400000, 600000000, 62, 4, 1, 0 }, /* actual: 595.2 MHz */
{ 0, 0, 0, 0, 0, 0 },
};
@@ -1583,19 +1562,19 @@
};
static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
- { 12000000, 800000000, 66, 1, 0, 0 }, /* actual: 792.0 MHz */
- { 13000000, 800000000, 61, 1, 0, 0 }, /* actual: 793.0 MHz */
- { 38400000, 297600000, 93, 4, 2, 0 },
- { 38400000, 400000000, 125, 4, 2, 0 },
- { 38400000, 532800000, 111, 4, 1, 0 },
- { 38400000, 665600000, 104, 3, 1, 0 },
- { 38400000, 800000000, 125, 3, 1, 0 },
- { 38400000, 931200000, 97, 4, 0, 0 },
- { 38400000, 1065600000, 111, 4, 0, 0 },
- { 38400000, 1200000000, 125, 4, 0, 0 },
- { 38400000, 1331200000, 104, 3, 0, 0 },
- { 38400000, 1459200000, 76, 2, 0, 0 },
- { 38400000, 1600000000, 125, 3, 0, 0 },
+ { 12000000, 800000000, 66, 1, 1, 0 }, /* actual: 792.0 MHz */
+ { 13000000, 800000000, 61, 1, 1, 0 }, /* actual: 793.0 MHz */
+ { 38400000, 297600000, 93, 4, 3, 0 },
+ { 38400000, 400000000, 125, 4, 3, 0 },
+ { 38400000, 532800000, 111, 4, 2, 0 },
+ { 38400000, 665600000, 104, 3, 2, 0 },
+ { 38400000, 800000000, 125, 3, 2, 0 },
+ { 38400000, 931200000, 97, 4, 1, 0 },
+ { 38400000, 1065600000, 111, 4, 1, 0 },
+ { 38400000, 1200000000, 125, 4, 1, 0 },
+ { 38400000, 1331200000, 104, 3, 1, 0 },
+ { 38400000, 1459200000, 76, 2, 1, 0 },
+ { 38400000, 1600000000, 125, 3, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
@@ -1705,9 +1684,9 @@
};
static struct tegra_clk_pll_freq_table pll_re_vco_freq_table[] = {
- { 12000000, 672000000, 56, 1, 0, 0 },
- { 13000000, 672000000, 51, 1, 0, 0 }, /* actual: 663.0 MHz */
- { 38400000, 672000000, 70, 4, 0, 0 },
+ { 12000000, 672000000, 56, 1, 1, 0 },
+ { 13000000, 672000000, 51, 1, 1, 0 }, /* actual: 663.0 MHz */
+ { 38400000, 672000000, 70, 4, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
@@ -1754,8 +1733,8 @@
};
static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
- { 12000000, 408000000, 34, 1, 0, 0 },
- { 38400000, 408000000, 85, 8, 0, 0 }, /* cf = 4.8MHz, allowed exception */
+ { 12000000, 408000000, 34, 1, 1, 0 },
+ { 38400000, 408000000, 85, 8, 1, 0 }, /* cf = 4.8MHz, allowed exception */
{ 0, 0, 0, 0, 0, 0 },
};
@@ -1820,14 +1799,14 @@
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
- { 12000000, 282240000, 47, 1, 1, 1, 0xf148 }, /* actual: 282240234 */
- { 12000000, 368640000, 61, 1, 1, 1, 0xfe15 }, /* actual: 368640381 */
- { 12000000, 240000000, 60, 1, 2, 1, 0 },
- { 13000000, 282240000, 43, 1, 1, 1, 0xfd7d }, /* actual: 282239807 */
- { 13000000, 368640000, 56, 1, 1, 1, 0x06d8 }, /* actual: 368640137 */
- { 13000000, 240000000, 55, 1, 2, 1, 0 }, /* actual: 238.3 MHz */
- { 38400000, 282240000, 44, 3, 1, 1, 0xf333 }, /* actual: 282239844 */
- { 38400000, 368640000, 57, 3, 1, 1, 0x0333 }, /* actual: 368639844 */
+ { 12000000, 282240000, 47, 1, 2, 1, 0xf148 }, /* actual: 282240234 */
+ { 12000000, 368640000, 61, 1, 2, 1, 0xfe15 }, /* actual: 368640381 */
+ { 12000000, 240000000, 60, 1, 3, 1, 0 },
+ { 13000000, 282240000, 43, 1, 2, 1, 0xfd7d }, /* actual: 282239807 */
+ { 13000000, 368640000, 56, 1, 2, 1, 0x06d8 }, /* actual: 368640137 */
+ { 13000000, 240000000, 55, 1, 3, 1, 0 }, /* actual: 238.3 MHz */
+ { 38400000, 282240000, 44, 3, 2, 1, 0xf333 }, /* actual: 282239844 */
+ { 38400000, 368640000, 57, 3, 2, 1, 0x0333 }, /* actual: 368639844 */
{ 38400000, 240000000, 75, 3, 3, 1, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
@@ -1873,9 +1852,9 @@
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
- { 12000000, 594000000, 99, 1, 1, 0, 0 },
- { 13000000, 594000000, 91, 1, 1, 0, 0xfc4f }, /* actual: 594000183 */
- { 38400000, 594000000, 30, 1, 1, 0, 0x0e00 },
+ { 12000000, 594000000, 99, 1, 2, 0, 0 },
+ { 13000000, 594000000, 91, 1, 2, 0, 0xfc4f }, /* actual: 594000183 */
+ { 38400000, 594000000, 30, 1, 2, 0, 0x0e00 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
@@ -1911,9 +1890,9 @@
};
static struct tegra_clk_pll_freq_table tegra210_pll_d2_freq_table[] = {
- { 12000000, 594000000, 99, 1, 1, 0, 0xf000 },
- { 13000000, 594000000, 91, 1, 1, 0, 0xfc4f }, /* actual: 594000183 */
- { 38400000, 594000000, 30, 1, 1, 0, 0x0e00 },
+ { 12000000, 594000000, 99, 1, 2, 0, 0xf000 },
+ { 13000000, 594000000, 91, 1, 2, 0, 0xfc4f }, /* actual: 594000183 */
+ { 38400000, 594000000, 30, 1, 2, 0, 0x0e00 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
@@ -1935,8 +1914,9 @@
.sdm_din_mask = PLLA_SDM_DIN_MASK,
.sdm_ctrl_reg = PLLD2_MISC1,
.sdm_ctrl_en_mask = PLLD2_SDM_EN_MASK,
- .ssc_ctrl_reg = PLLD2_MISC1,
- .ssc_ctrl_en_mask = PLLD2_SSC_EN_MASK,
+ /* disable spread-spectrum for pll_d2 */
+ .ssc_ctrl_reg = 0,
+ .ssc_ctrl_en_mask = 0,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllss_nmp,
@@ -1955,9 +1935,9 @@
};
static struct tegra_clk_pll_freq_table pll_dp_freq_table[] = {
- { 12000000, 270000000, 90, 1, 3, 0, 0xf000 },
- { 13000000, 270000000, 83, 1, 3, 0, 0xf000 }, /* actual: 269.8 MHz */
- { 38400000, 270000000, 28, 1, 3, 0, 0xf400 },
+ { 12000000, 270000000, 90, 1, 4, 0, 0xf000 },
+ { 13000000, 270000000, 83, 1, 4, 0, 0xf000 }, /* actual: 269.8 MHz */
+ { 38400000, 270000000, 28, 1, 4, 0, 0xf400 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
@@ -2007,9 +1987,9 @@
};
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
- { 12000000, 480000000, 40, 1, 0, 0 },
- { 13000000, 480000000, 36, 1, 0, 0 }, /* actual: 468.0 MHz */
- { 38400000, 480000000, 25, 2, 0, 0 },
+ { 12000000, 480000000, 40, 1, 1, 0 },
+ { 13000000, 480000000, 36, 1, 1, 0 }, /* actual: 468.0 MHz */
+ { 38400000, 480000000, 25, 2, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
@@ -2037,47 +2017,6 @@
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
-struct utmi_clk_param {
- /* Oscillator Frequency in KHz */
- u32 osc_frequency;
- /* UTMIP PLL Enable Delay Count */
- u8 enable_delay_count;
- /* UTMIP PLL Stable count */
- u16 stable_count;
- /* UTMIP PLL Active delay count */
- u8 active_delay_count;
- /* UTMIP PLL Xtal frequency count */
- u16 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
- {
- .osc_frequency = 38400000, .enable_delay_count = 0x0,
- .stable_count = 0x0, .active_delay_count = 0x6,
- .xtal_freq_count = 0x80
- }, {
- .osc_frequency = 13000000, .enable_delay_count = 0x02,
- .stable_count = 0x33, .active_delay_count = 0x05,
- .xtal_freq_count = 0x7f
- }, {
- .osc_frequency = 19200000, .enable_delay_count = 0x03,
- .stable_count = 0x4b, .active_delay_count = 0x06,
- .xtal_freq_count = 0xbb
- }, {
- .osc_frequency = 12000000, .enable_delay_count = 0x02,
- .stable_count = 0x2f, .active_delay_count = 0x08,
- .xtal_freq_count = 0x76
- }, {
- .osc_frequency = 26000000, .enable_delay_count = 0x04,
- .stable_count = 0x66, .active_delay_count = 0x09,
- .xtal_freq_count = 0xfe
- }, {
- .osc_frequency = 16800000, .enable_delay_count = 0x03,
- .stable_count = 0x41, .active_delay_count = 0x0a,
- .xtal_freq_count = 0xa4
- },
-};
-
static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true },
@@ -2154,6 +2093,8 @@
[tegra_clk_dpaux1] = { .dt_id = TEGRA210_CLK_DPAUX1, .present = true },
[tegra_clk_sor0] = { .dt_id = TEGRA210_CLK_SOR0, .present = true },
[tegra_clk_sor0_lvds] = { .dt_id = TEGRA210_CLK_SOR0_LVDS, .present = true },
+ [tegra_clk_sor1] = { .dt_id = TEGRA210_CLK_SOR1, .present = true },
+ [tegra_clk_sor1_src] = { .dt_id = TEGRA210_CLK_SOR1_SRC, .present = true },
[tegra_clk_gpu] = { .dt_id = TEGRA210_CLK_GPU, .present = true },
[tegra_clk_pll_g_ref] = { .dt_id = TEGRA210_CLK_PLL_G_REF, .present = true, },
[tegra_clk_uartb_8] = { .dt_id = TEGRA210_CLK_UARTB, .present = true },
@@ -2345,114 +2286,6 @@
static struct clk **clks;
-static void tegra210_utmi_param_configure(void __iomem *clk_base)
-{
- u32 reg;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
- if (osc_freq == utmi_parameters[i].osc_frequency)
- break;
- }
-
- if (i >= ARRAY_SIZE(utmi_parameters)) {
- pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
- osc_freq);
- return;
- }
-
- reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0);
- reg |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE |
- PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT |
- PLLU_HW_PWRDN_CFG0_USE_LOCKDET;
- reg &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL |
- PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL);
- writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0);
-
- reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0);
- reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE;
- writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0);
- udelay(1);
-
- reg = readl_relaxed(clk_base + PLLU_BASE);
- reg &= ~PLLU_BASE_CLKENABLE_USB;
- writel_relaxed(reg, clk_base + PLLU_BASE);
-
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- udelay(10);
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL stable and active counts */
- /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
- reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
- reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
-
- reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
- active_delay_count);
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL delay and oscillator frequency counts */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
- enable_delay_count);
-
- reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
- reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
- xtal_freq_count);
-
- reg |= UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
- udelay(1);
-
- /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
- reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP;
- reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP;
- reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Setup HW control of UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
- reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-
- udelay(1);
-
- reg = readl_relaxed(clk_base + XUSB_PLL_CFG0);
- reg &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY;
- writel_relaxed(reg, clk_base + XUSB_PLL_CFG0);
-
- udelay(1);
-
- /* Enable HW control UTMIPLL */
- reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
- reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
- writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
-}
-
static __init void tegra210_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
@@ -2463,18 +2296,18 @@
1, 2);
clks[TEGRA210_CLK_XUSB_SS_DIV2] = clk;
- clk = tegra_clk_register_periph_fixed("dpaux", "pll_p", 0, clk_base,
- 1, 17, 181);
- clks[TEGRA210_CLK_DPAUX] = clk;
-
- clk = tegra_clk_register_periph_fixed("dpaux1", "pll_p", 0, clk_base,
- 1, 17, 207);
- clks[TEGRA210_CLK_DPAUX1] = clk;
-
clk = tegra_clk_register_periph_fixed("sor_safe", "pll_p", 0, clk_base,
1, 17, 222);
clks[TEGRA210_CLK_SOR_SAFE] = clk;
+ clk = tegra_clk_register_periph_fixed("dpaux", "sor_safe", 0, clk_base,
+ 1, 17, 181);
+ clks[TEGRA210_CLK_DPAUX] = clk;
+
+ clk = tegra_clk_register_periph_fixed("dpaux1", "sor_safe", 0, clk_base,
+ 1, 17, 207);
+ clks[TEGRA210_CLK_DPAUX1] = clk;
+
/* pll_d_dsi_out */
clk = clk_register_gate(NULL, "pll_d_dsi_out", "pll_d_out0", 0,
clk_base + PLLD_MISC0, 21, 0, &pll_d_lock);
@@ -2520,7 +2353,6 @@
static void __init tegra210_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
- u32 val;
struct clk *clk;
/* PLLC */
@@ -2580,12 +2412,9 @@
clks[TEGRA210_CLK_PLL_M_UD] = clk;
/* PLLU_VCO */
- val = readl(clk_base + pll_u_vco_params.base_reg);
- val &= ~PLLU_BASE_OVERRIDE; /* disable PLLU_OVERRIDE */
- writel(val, clk_base + pll_u_vco_params.base_reg);
-
- clk = tegra_clk_register_pllre("pll_u_vco", "pll_ref", clk_base, pmc,
- 0, &pll_u_vco_params, &pll_u_lock, pll_ref_freq);
+ clk = tegra_clk_register_pllu_tegra210("pll_u_vco", "pll_ref",
+ clk_base, 0, &pll_u_vco_params,
+ &pll_u_lock);
clk_register_clkdev(clk, "pll_u_vco", NULL);
clks[TEGRA210_CLK_PLL_U] = clk;
@@ -2618,8 +2447,6 @@
clk_register_clkdev(clk, "pll_u_out2", NULL);
clks[TEGRA210_CLK_PLL_U_OUT2] = clk;
- tegra210_utmi_param_configure(clk_base);
-
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u_vco",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 9396f49..8e2db5e 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -118,20 +118,6 @@
#define AUDIO_SYNC_DOUBLER 0x49c
-#define UTMIP_PLL_CFG2 0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
-
-#define UTMIP_PLL_CFG1 0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
-
/* Tegra CPU clock and reset control regs */
#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
@@ -207,46 +193,6 @@
static struct clk **clks;
-/*
- * Structure defining the fields for USB UTMI clocks Parameters.
- */
-struct utmi_clk_param {
- /* Oscillator Frequency in KHz */
- u32 osc_frequency;
- /* UTMIP PLL Enable Delay Count */
- u8 enable_delay_count;
- /* UTMIP PLL Stable count */
- u8 stable_count;
- /* UTMIP PLL Active delay count */
- u8 active_delay_count;
- /* UTMIP PLL Xtal frequency count */
- u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
- {
- .osc_frequency = 13000000, .enable_delay_count = 0x02,
- .stable_count = 0x33, .active_delay_count = 0x05,
- .xtal_freq_count = 0x7f
- }, {
- .osc_frequency = 19200000, .enable_delay_count = 0x03,
- .stable_count = 0x4b, .active_delay_count = 0x06,
- .xtal_freq_count = 0xbb
- }, {
- .osc_frequency = 12000000, .enable_delay_count = 0x02,
- .stable_count = 0x2f, .active_delay_count = 0x04,
- .xtal_freq_count = 0x76
- }, {
- .osc_frequency = 26000000, .enable_delay_count = 0x04,
- .stable_count = 0x66, .active_delay_count = 0x09,
- .xtal_freq_count = 0xfe
- }, {
- .osc_frequency = 16800000, .enable_delay_count = 0x03,
- .stable_count = 0x41, .active_delay_count = 0x0a,
- .xtal_freq_count = 0xa4
- },
-};
-
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
{ 12000000, 1040000000, 520, 6, 1, 8 },
{ 13000000, 1040000000, 480, 6, 1, 8 },
@@ -873,59 +819,6 @@
[tegra_clk_pll_a_out0] = { .dt_id = TEGRA30_CLK_PLL_A_OUT0, .present = true },
};
-static void tegra30_utmi_param_configure(void)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
- if (input_freq == utmi_parameters[i].osc_frequency)
- break;
- }
-
- if (i >= ARRAY_SIZE(utmi_parameters)) {
- pr_err("%s: Unexpected input rate %lu\n", __func__, input_freq);
- return;
- }
-
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL stable and active counts */
- reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
- reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
- utmi_parameters[i].stable_count);
-
- reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
- utmi_parameters[i].active_delay_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
-
- /* Program UTMIP PLL delay and oscillator frequency counts */
- reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
- reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
- reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
- utmi_parameters[i].enable_delay_count);
-
- reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
- reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
- utmi_parameters[i].xtal_freq_count);
-
- /* Remove power downs from UTMIP PLL control bits */
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
- reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
-
- writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-}
-
static const char *pll_e_parents[] = { "pll_ref", "pll_p" };
static void __init tegra30_pll_init(void)
@@ -972,12 +865,10 @@
clks[TEGRA30_CLK_PLL_X_OUT0] = clk;
/* PLLU */
- clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0,
- &pll_u_params, NULL);
+ clk = tegra_clk_register_pllu("pll_u", "pll_ref", clk_base, 0,
+ &pll_u_params, NULL);
clks[TEGRA30_CLK_PLL_U] = clk;
- tegra30_utmi_param_configure();
-
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0,
&pll_d_params, &pll_d_lock);
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 9421f03..6ba82ec 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -427,6 +427,23 @@
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
+struct clk *tegra_clk_register_pllu(const char *name, const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllu_tegra114(const char *name,
+ const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllu_tegra210(const char *name,
+ const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock);
+
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index bd3530e..35288b2 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -308,7 +308,7 @@
#define TEGRA210_CLK_CLK_OUT_3 279
#define TEGRA210_CLK_BLINK 280
/* 281 */
-/* 282 */
+#define TEGRA210_CLK_SOR1_SRC 282
/* 283 */
#define TEGRA210_CLK_XUSB_HOST_SRC 284
#define TEGRA210_CLK_XUSB_FALCON_SRC 285