Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ads7846 - SPI_CPHA mode bugfix
Input: ads7846 - document that it handles tsc2046 too
Input: input-polldev - add module info
Input: ucb1x00-ts - remove commented out code
Input: ucb1400_ts - use sched_setscheduler()
Input: ALPS - force stream mode
Input: iforce - minor clean-ups
Input: iforce - fix force feedback not working
Input: adbhid - do not access input_dev->private directly
Input: logips2pp - add type 72 (PS/2 TrackMan Marble)
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index fb129c4..682244b 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -370,10 +370,8 @@
/*
* Disable spring, enable force feedback.
- * FIXME: We should use iforce_set_autocenter() et al here.
*/
-
- iforce_send_packet(iforce, FF_CMD_AUTOCENTER, "\004\000");
+ iforce_set_autocenter(input_dev, 0);
/*
* Find appropriate device entry
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index 21c4e13..3154ccd 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -246,6 +246,8 @@
int iforce_get_id_packet(struct iforce *iforce, char *packet)
{
+ int status;
+
switch (iforce->bus) {
case IFORCE_USB:
@@ -254,18 +256,22 @@
iforce->cr.bRequest = packet[0];
iforce->ctrl->dev = iforce->usbdev;
- if (usb_submit_urb(iforce->ctrl, GFP_ATOMIC))
+ status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC);
+ if (status) {
+ err("usb_submit_urb failed %d", status);
return -1;
+ }
wait_event_interruptible_timeout(iforce->wait,
iforce->ctrl->status != -EINPROGRESS, HZ);
if (iforce->ctrl->status) {
+ dbg("iforce->ctrl->status = %d", iforce->ctrl->status);
usb_unlink_urb(iforce->ctrl);
return -1;
}
#else
- err("iforce_get_id_packet: iforce->bus = USB!");
+ dbg("iforce_get_id_packet: iforce->bus = USB!");
#endif
break;
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 750099d..1457b73 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -65,6 +65,7 @@
XMIT_INC(iforce->xmit.tail, n);
if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) {
+ clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
warn("usb_submit_urb failed %d\n", n);
}
@@ -163,8 +164,8 @@
usb_fill_int_urb(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress),
iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval);
- usb_fill_bulk_urb(iforce->out, dev, usb_sndbulkpipe(dev, epout->bEndpointAddress),
- iforce + 1, 32, iforce_usb_out, iforce);
+ usb_fill_int_urb(iforce->out, dev, usb_sndintpipe(dev, epout->bEndpointAddress),
+ iforce + 1, 32, iforce_usb_out, iforce, epout->bInterval);
usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
(void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce);
diff --git a/drivers/input/misc/input-polldev.c b/drivers/input/misc/input-polldev.c
index 1b2b9c9..b773d4c 100644
--- a/drivers/input/misc/input-polldev.c
+++ b/drivers/input/misc/input-polldev.c
@@ -12,6 +12,11 @@
#include <linux/mutex.h>
#include <linux/input-polldev.h>
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("Generic implementation of a polled input device");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+
static DEFINE_MUTEX(polldev_mutex);
static int polldev_users;
static struct workqueue_struct *polldev_wq;
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index cf3e466..2c5f11a 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -251,11 +251,15 @@
dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++);
- *version = (param[0] << 8) | (param[1] << 4) | i;
+ if (version) {
+ for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
+ /* empty */;
+ *version = (param[0] << 8) | (param[1] << 4) | i;
+ }
for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
- if (!memcmp(param, alps_model_data[i].signature, sizeof(alps_model_data[i].signature)))
+ if (!memcmp(param, alps_model_data[i].signature,
+ sizeof(alps_model_data[i].signature)))
return alps_model_data + i;
return NULL;
@@ -380,32 +384,46 @@
return 0;
}
-static int alps_reconnect(struct psmouse *psmouse)
+static int alps_hw_init(struct psmouse *psmouse, int *version)
{
struct alps_data *priv = psmouse->private;
- int version;
- psmouse_reset(psmouse);
-
- if (!(priv->i = alps_get_model(psmouse, &version)))
+ priv->i = alps_get_model(psmouse, version);
+ if (!priv->i)
return -1;
if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
return -1;
if (alps_tap_mode(psmouse, 1)) {
- printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
+ printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
return -1;
}
if (alps_absolute_mode(psmouse)) {
- printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
+ printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
return -1;
}
if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
return -1;
+ /* ALPS needs stream mode, otherwise it won't report any data */
+ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
+ printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int alps_reconnect(struct psmouse *psmouse)
+{
+ psmouse_reset(psmouse);
+
+ if (alps_hw_init(psmouse, NULL))
+ return -1;
+
return 0;
}
@@ -430,23 +448,9 @@
goto init_fail;
priv->dev2 = dev2;
+ psmouse->private = priv;
- priv->i = alps_get_model(psmouse, &version);
- if (!priv->i)
- goto init_fail;
-
- if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
- goto init_fail;
-
- if (alps_tap_mode(psmouse, 1))
- printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-
- if (alps_absolute_mode(psmouse)) {
- printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
- goto init_fail;
- }
-
- if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
+ if (alps_hw_init(psmouse, &version))
goto init_fail;
dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
@@ -493,13 +497,13 @@
/* We are having trouble resyncing ALPS touchpads so disable it for now */
psmouse->resync_time = 0;
- psmouse->private = priv;
return 0;
init_fail:
psmouse_reset(psmouse);
input_free_device(dev2);
kfree(priv);
+ psmouse->private = NULL;
return -1;
}
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 9df74b7..0c5660d 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -221,6 +221,7 @@
{ 66, PS2PP_KIND_MX, /* MX3100 reciver */
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
+ { 72, PS2PP_KIND_TRACKMAN, 0 }, /* T-CH11: TrackMan Marble */
{ 73, 0, PS2PP_SIDE_BTN },
{ 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4f09180..e5cca9b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -12,17 +12,17 @@
if INPUT_TOUCHSCREEN
config TOUCHSCREEN_ADS7846
- tristate "ADS 7846/7843 based touchscreens"
+ tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
depends on SPI_MASTER
depends on HWMON = n || HWMON
help
Say Y here if you have a touchscreen interface using the
- ADS7846 or ADS7843 controller, and your board-specific setup
- code includes that in its table of SPI devices.
+ ADS7846/TSC2046 or ADS7843 controller, and your board-specific
+ setup code includes that in its table of SPI devices.
If HWMON is selected, and the driver is told the reference voltage
on your board, you will also get hwmon interfaces for the voltage
- (and on ads7846, temperature) sensors of this chip.
+ (and on ads7846/tsc2046, temperature) sensors of this chip.
If unsure, say N (but it's safe to say "Y").
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 693e3b2..1c9069c 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -39,6 +39,7 @@
/*
* This code has been heavily tested on a Nokia 770, and lightly
* tested on other ads7846 devices (OSK/Mistral, Lubbock).
+ * TSC2046 is just newer ads7846 silicon.
* Support for ads7843 tested on Atmel at91sam926x-EK.
* Support for ads7845 has only been stubbed in.
*
@@ -847,7 +848,7 @@
* may not. So we stick to very-portable 8 bit words, both RX and TX.
*/
spi->bits_per_word = 8;
- spi->mode = SPI_MODE_1;
+ spi->mode = SPI_MODE_0;
err = spi_setup(spi);
if (err < 0)
return err;
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 6582816..f0cbcdb 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -288,9 +288,9 @@
struct ucb1400 *ucb = _ucb;
struct task_struct *tsk = current;
int valid = 0;
+ struct sched_param param = { .sched_priority = 1 };
- tsk->policy = SCHED_FIFO;
- tsk->rt_priority = 1;
+ sched_setscheduler(tsk, SCHED_FIFO, ¶m);
while (!kthread_should_stop()) {
unsigned int x, y, p;
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index b77ef51..b46817f 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -628,16 +628,16 @@
*/
static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
- struct adbhid *adbhid = dev->private;
+ struct adbhid *adbhid = input_get_drvdata(dev);
unsigned char leds;
switch (type) {
case EV_LED:
- leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0)
- | (test_bit(LED_NUML, dev->led) ? 1 : 0)
- | (test_bit(LED_CAPSL, dev->led) ? 2 : 0);
- real_leds(leds, adbhid->id);
- return 0;
+ leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) |
+ (test_bit(LED_NUML, dev->led) ? 1 : 0) |
+ (test_bit(LED_CAPSL, dev->led) ? 2 : 0);
+ real_leds(leds, adbhid->id);
+ return 0;
}
return -1;
@@ -649,7 +649,7 @@
switch (code) {
case ADB_MSG_PRE_RESET:
case ADB_MSG_POWERDOWN:
- /* Stop the repeat timer. Autopoll is already off at this point */
+ /* Stop the repeat timer. Autopoll is already off at this point */
{
int i;
for (i = 1; i < 16; i++) {
@@ -699,7 +699,7 @@
hid->current_handler_id = current_handler_id;
hid->mouse_kind = mouse_kind;
hid->flags = 0;
- input_dev->private = hid;
+ input_set_drvdata(input_dev, hid);
input_dev->name = hid->name;
input_dev->phys = hid->phys;
input_dev->id.bustype = BUS_ADB;
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index cb8c264..7772bd1 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -207,16 +207,7 @@
struct ucb1x00_ts *ts = _ts;
struct task_struct *tsk = current;
DECLARE_WAITQUEUE(wait, tsk);
- int valid;
-
- /*
- * We could run as a real-time thread. However, thus far
- * this doesn't seem to be necessary.
- */
-// tsk->policy = SCHED_FIFO;
-// tsk->rt_priority = 1;
-
- valid = 0;
+ int valid = 0;
add_wait_queue(&ts->irq_wait, &wait);
while (!kthread_should_stop()) {