diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 1b9ba4d..c7e8f03 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.10"
 
 /*
  *	A generic parallel ATA driver using libata
@@ -118,6 +118,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations generic_port_ops = {
@@ -226,7 +228,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= ata_generic,
 	.probe 		= ata_generic_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init ata_generic_init(void)
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 4e1d3b5..7d9e391 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
 
 enum {
 	ATIIXP_IDE_PIO_TIMING	= 0x40,
@@ -218,6 +218,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations atiixp_port_ops = {
@@ -281,7 +283,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= atiixp,
 	.probe 		= atiixp_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.resume		= ata_pci_device_resume,
+	.suspend	= ata_pci_device_suspend,
 };
 
 static int __init atiixp_init(void)
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 8dafa4a..38c00f6 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -39,7 +39,7 @@
 #include <asm/msr.h>
 
 #define DRV_NAME	"cs5535"
-#define DRV_VERSION	"0.2.10"
+#define DRV_VERSION	"0.2.11"
 
 /*
  *	The Geode (Aka Athlon GX now) uses an internal MSR based
@@ -186,6 +186,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cs5535_port_ops = {
@@ -269,6 +271,8 @@
 	.id_table	= cs5535,
 	.probe 		= cs5535_init_one,
 	.remove		= ata_pci_remove_one
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init cs5535_init(void)
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 5a0b811..6352bc7 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -18,7 +18,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cypress"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "0.1.4"
 
 /* here are the offset definitions for the registers */
 
@@ -137,6 +137,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
@@ -204,7 +206,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= cy82c693,
 	.probe 		= cy82c693_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init cy82c693_init(void)
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 755f792..5658983 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_efar"
-#define DRV_VERSION	"0.4.2"
+#define DRV_VERSION	"0.4.3"
 
 /**
  *	efar_pre_reset	-	check for 40/80 pin
@@ -235,6 +235,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations efar_ops = {
@@ -316,6 +318,8 @@
 	.id_table		= efar_pci_tbl,
 	.probe			= efar_init_one,
 	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
 };
 
 static int __init efar_init(void)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 1ea6407..a5953c3 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,7 +20,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.0.5u"
+#define DRV_VERSION	"0.1.1"
 
 /**
  *	marvell_pre_reset	-	check for 40/80 pin
@@ -103,6 +103,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations marvell_ops = {
@@ -197,6 +199,8 @@
 	.id_table		= marvell_pci_tbl,
 	.probe			= marvell_init_one,
 	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
 };
 
 static int __init marvell_init(void)
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index e00d406..752a741 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
 
 enum {
 	IDETIM = 0x6C,		/* IDE control register */
@@ -168,6 +168,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations mpiix_port_ops = {
@@ -285,7 +287,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= mpiix,
 	.probe 		= mpiix_init_one,
-	.remove		= mpiix_remove_one
+	.remove		= mpiix_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init mpiix_init(void)
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 1963a4d..9566167 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -16,7 +16,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_netcell"
-#define DRV_VERSION	"0.1.5"
+#define DRV_VERSION	"0.1.6"
 
 /**
  *	netcell_probe_init	-	check for 40/80 pin
@@ -65,6 +65,8 @@
 	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations netcell_ops = {
@@ -153,6 +155,8 @@
 	.id_table		= netcell_pci_tbl,
 	.probe			= netcell_init_one,
 	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
 };
 
 static int __init netcell_init(void)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 7ec800f..428e6b5 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -28,7 +28,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
 
 /**
  *	ns87410_pre_reset		-	probe begin
@@ -158,6 +158,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations ns87410_port_ops = {
@@ -210,7 +212,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= ns87410,
 	.probe 		= ns87410_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init ns87410_init(void)
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 8837256..1283fb7 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -233,6 +233,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations oldpiix_pata_ops = {
@@ -314,6 +316,8 @@
 	.id_table		= oldpiix_pci_tbl,
 	.probe			= oldpiix_init_one,
 	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
 };
 
 static int __init oldpiix_init(void)
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c6319cf..66f561d 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.2.7"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -109,30 +109,6 @@
 	outb(0x83, regio + 2);
 }
 
-#if 0
-/**
- *	opti_read_reg		-	control register read
- *	@ap: ATA port
- *	@reg: control register number
- *
- *	The Opti uses magic 'trapdoor' register accesses to do configuration
- *	rather than using PCI space as other controllers do. The double inw
- *	on the error register activates configuration mode. We can then read
- *	the control register
- */
-
-static u8 opti_read_reg(struct ata_port *ap, int reg)
-{
-	unsigned long regio = ap->ioaddr.cmd_addr;
-	u8 ret;
-	inw(regio + 1);
-	inw(regio + 1);
-	outb(3, regio + 2);
-	ret = inb(regio + reg);
-	outb(0x83, regio + 2);
-}
-#endif
-
 /**
  *	opti_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -204,12 +180,13 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations opti_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= opti_set_piomode,
-/*	.set_dmamode	= opti_set_dmamode, */
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
 	.check_status 	= ata_check_status,
@@ -267,7 +244,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= opti,
 	.probe 		= opti_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init opti_init(void)
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 2f4770c..d898e42 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -361,6 +361,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations optidma_port_ops = {
@@ -522,7 +524,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= optidma,
 	.probe 		= optidma_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init optidma_init(void)
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 048c2bb..5fe7ffc 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -229,6 +229,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations radisys_pata_ops = {
@@ -311,6 +313,8 @@
 	.id_table		= radisys_pci_tbl,
 	.probe			= radisys_init_one,
 	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
 };
 
 static int __init radisys_init(void)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 0c75dae..0c5393a 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -40,7 +40,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sc1200"
-#define DRV_VERSION	"0.2.3"
+#define DRV_VERSION	"0.2.4"
 
 #define SC1200_REV_A	0x00
 #define SC1200_REV_B1	0x01
@@ -195,6 +195,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations sc1200_port_ops = {
@@ -264,7 +266,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= sc1200,
 	.probe 		= sc1200_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init sc1200_init(void)
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index bfda1f7..ece9cb7 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_triflex"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.2.7"
 
 /**
  *	triflex_prereset		-	probe begin
@@ -194,6 +194,8 @@
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations triflex_port_ops = {
@@ -258,7 +260,9 @@
 	.name 		= DRV_NAME,
 	.id_table	= triflex,
 	.probe 		= triflex_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init triflex_init(void)