can: sja1000: fix {pre,post}_irq() handling and IRQ handler return value
This patch fixes the issue that the sja1000_interrupt() function may have
returned IRQ_NONE without processing the optional pre_irq() and post_irq()
function before. Further the irq processing counter 'n' is moved to the end of
the while statement to return correct IRQ_[NONE|HANDLED] values at error
conditions.
Reported-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 7164a99..f17c301 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -494,20 +494,20 @@
uint8_t isrc, status;
int n = 0;
- /* Shared interrupts and IRQ off? */
- if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
- return IRQ_NONE;
-
if (priv->pre_irq)
priv->pre_irq(priv);
+ /* Shared interrupts and IRQ off? */
+ if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
+ goto out;
+
while ((isrc = priv->read_reg(priv, SJA1000_IR)) &&
(n < SJA1000_MAX_IRQ)) {
- n++;
+
status = priv->read_reg(priv, SJA1000_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
- return IRQ_NONE;
+ goto out;
if (isrc & IRQ_WUI)
netdev_warn(dev, "wakeup interrupt\n");
@@ -535,7 +535,7 @@
status = priv->read_reg(priv, SJA1000_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
- return IRQ_NONE;
+ goto out;
}
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
@@ -543,8 +543,9 @@
if (sja1000_err(dev, isrc, status))
break;
}
+ n++;
}
-
+out:
if (priv->post_irq)
priv->post_irq(priv);