ide: add ide_pktcmd_tf_load() helper
Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it.
There should be no functionality changes caused by this patch.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 855a23c..44b033e 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -922,14 +922,8 @@
info->dma = !hwif->dma_setup(drive);
/* Set up the controller registers. */
- if (IDE_CONTROL_REG)
- HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
- HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG);
- HWIF(drive)->OUTB(0, IDE_IREASON_REG);
- HWIF(drive)->OUTB(0, IDE_SECTOR_REG);
-
- HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG);
- HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG);
+ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL |
+ IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma);
if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
/* waiting for CDB interrupt, not DMA yet. */
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index d4fd064..ff8232e 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1067,13 +1067,8 @@
if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
dma = !hwif->dma_setup(drive);
- if (IDE_CONTROL_REG)
- HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
- /* Use PIO/DMA */
- hwif->OUTB(dma, IDE_FEATURE_REG);
- hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG);
- hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG);
- HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
+ ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
+ IDE_TFLAG_OUT_DEVICE, bcount, dma);
if (dma) { /* Begin DMA, if necessary */
set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index d36df77..1ed7a86 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -1734,3 +1734,19 @@
}
EXPORT_SYMBOL(ide_do_drive_cmd);
+
+void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
+{
+ ide_task_t task;
+
+ memset(&task, 0, sizeof(task));
+ task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM |
+ IDE_TFLAG_OUT_FEATURE | tf_flags;
+ task.tf.feature = dma; /* Use PIO/DMA */
+ task.tf.lbam = bcount & 0xff;
+ task.tf.lbah = (bcount >> 8) & 0xff;
+
+ ide_tf_load(drive, &task);
+}
+
+EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d1f2446..3cbca3f 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2171,12 +2171,9 @@
if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
dma_ok = !hwif->dma_setup(drive);
- if (IDE_CONTROL_REG)
- hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
- hwif->OUTB(dma_ok ? 1 : 0, IDE_FEATURE_REG); /* Use PIO/DMA */
- hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG);
- hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG);
- hwif->OUTB(drive->select.all, IDE_SELECT_REG);
+ ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
+ IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
+
if (dma_ok) /* Will begin DMA later */
set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 76f0ccd..02e9189 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -590,12 +590,8 @@
}
SELECT_DRIVE(drive);
- if (IDE_CONTROL_REG)
- HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
- hwif->OUTB(dma, IDE_FEATURE_REG);
- hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG);
- hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG);
+ ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma);
if (dma)
set_bit(PC_DMA_OK, &pc->flags);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 790ffa7..20969eb 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -968,6 +968,8 @@
extern int drive_is_ready(ide_drive_t *);
+void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
+
/*
* taskfile io for disks for now...and builds request from ide_ioctl
*/