| /* |
| * Silicon Labs Si2168 DVB-T/T2/C demodulator driver |
| * |
| * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "si2168_priv.h" |
| |
| static const struct dvb_frontend_ops si2168_ops; |
| |
| /* execute firmware command */ |
| static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd) |
| { |
| struct si2168_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| unsigned long timeout; |
| |
| mutex_lock(&dev->i2c_mutex); |
| |
| if (cmd->wlen) { |
| /* write cmd and args for firmware */ |
| ret = i2c_master_send(client, cmd->args, cmd->wlen); |
| if (ret < 0) { |
| goto err_mutex_unlock; |
| } else if (ret != cmd->wlen) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| } |
| |
| if (cmd->rlen) { |
| /* wait cmd execution terminate */ |
| #define TIMEOUT 70 |
| timeout = jiffies + msecs_to_jiffies(TIMEOUT); |
| while (!time_after(jiffies, timeout)) { |
| ret = i2c_master_recv(client, cmd->args, cmd->rlen); |
| if (ret < 0) { |
| goto err_mutex_unlock; |
| } else if (ret != cmd->rlen) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| |
| /* firmware ready? */ |
| if ((cmd->args[0] >> 7) & 0x01) |
| break; |
| } |
| |
| dev_dbg(&client->dev, "cmd execution took %d ms\n", |
| jiffies_to_msecs(jiffies) - |
| (jiffies_to_msecs(timeout) - TIMEOUT)); |
| |
| /* error bit set? */ |
| if ((cmd->args[0] >> 6) & 0x01) { |
| ret = -EREMOTEIO; |
| goto err_mutex_unlock; |
| } |
| |
| if (!((cmd->args[0] >> 7) & 0x01)) { |
| ret = -ETIMEDOUT; |
| goto err_mutex_unlock; |
| } |
| } |
| |
| mutex_unlock(&dev->i2c_mutex); |
| return 0; |
| err_mutex_unlock: |
| mutex_unlock(&dev->i2c_mutex); |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct si2168_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i; |
| unsigned int utmp, utmp1, utmp2; |
| struct si2168_cmd cmd; |
| |
| *status = 0; |
| |
| if (!dev->active) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| memcpy(cmd.args, "\xa0\x01", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 13; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| memcpy(cmd.args, "\x90\x01", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 9; |
| break; |
| case SYS_DVBT2: |
| memcpy(cmd.args, "\x50\x01", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 14; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| switch ((cmd.args[2] >> 1) & 0x03) { |
| case 0x01: |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; |
| break; |
| case 0x03: |
| *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | |
| FE_HAS_SYNC | FE_HAS_LOCK; |
| break; |
| } |
| |
| dev->fe_status = *status; |
| |
| if (*status & FE_HAS_LOCK) { |
| c->cnr.len = 1; |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; |
| c->cnr.stat[0].svalue = cmd.args[3] * 1000 / 4; |
| } else { |
| c->cnr.len = 1; |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| dev_dbg(&client->dev, "status=%02x args=%*ph\n", |
| *status, cmd.rlen, cmd.args); |
| |
| /* BER */ |
| if (*status & FE_HAS_VITERBI) { |
| memcpy(cmd.args, "\x82\x00", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 3; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* |
| * Firmware returns [0, 255] mantissa and [0, 8] exponent. |
| * Convert to DVB API: mantissa * 10^(8 - exponent) / 10^8 |
| */ |
| utmp = clamp(8 - cmd.args[1], 0, 8); |
| for (i = 0, utmp1 = 1; i < utmp; i++) |
| utmp1 = utmp1 * 10; |
| |
| utmp1 = cmd.args[2] * utmp1; |
| utmp2 = 100000000; /* 10^8 */ |
| |
| dev_dbg(&client->dev, |
| "post_bit_error=%u post_bit_count=%u ber=%u*10^-%u\n", |
| utmp1, utmp2, cmd.args[2], cmd.args[1]); |
| |
| c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; |
| c->post_bit_error.stat[0].uvalue += utmp1; |
| c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; |
| c->post_bit_count.stat[0].uvalue += utmp2; |
| } else { |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| /* UCB */ |
| if (*status & FE_HAS_SYNC) { |
| memcpy(cmd.args, "\x84\x01", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 3; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| utmp1 = cmd.args[2] << 8 | cmd.args[1] << 0; |
| dev_dbg(&client->dev, "block_error=%u\n", utmp1); |
| |
| /* Sometimes firmware returns bogus value */ |
| if (utmp1 == 0xffff) |
| utmp1 = 0; |
| |
| c->block_error.stat[0].scale = FE_SCALE_COUNTER; |
| c->block_error.stat[0].uvalue += utmp1; |
| } else { |
| c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_set_frontend(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct si2168_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| struct si2168_cmd cmd; |
| u8 bandwidth, delivery_system; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%u modulation=%u frequency=%u bandwidth_hz=%u symbol_rate=%u inversion=%u stream_id=%u\n", |
| c->delivery_system, c->modulation, c->frequency, |
| c->bandwidth_hz, c->symbol_rate, c->inversion, |
| c->stream_id); |
| |
| if (!dev->active) { |
| ret = -EAGAIN; |
| goto err; |
| } |
| |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| delivery_system = 0x20; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| delivery_system = 0x30; |
| break; |
| case SYS_DVBT2: |
| delivery_system = 0x70; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (c->bandwidth_hz == 0) { |
| ret = -EINVAL; |
| goto err; |
| } else if (c->bandwidth_hz <= 2000000) |
| bandwidth = 0x02; |
| else if (c->bandwidth_hz <= 5000000) |
| bandwidth = 0x05; |
| else if (c->bandwidth_hz <= 6000000) |
| bandwidth = 0x06; |
| else if (c->bandwidth_hz <= 7000000) |
| bandwidth = 0x07; |
| else if (c->bandwidth_hz <= 8000000) |
| bandwidth = 0x08; |
| else if (c->bandwidth_hz <= 9000000) |
| bandwidth = 0x09; |
| else if (c->bandwidth_hz <= 10000000) |
| bandwidth = 0x0a; |
| else |
| bandwidth = 0x0f; |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) { |
| ret = fe->ops.tuner_ops.set_params(fe); |
| if (ret) |
| goto err; |
| } |
| |
| memcpy(cmd.args, "\x88\x02\x02\x02\x02", 5); |
| cmd.wlen = 5; |
| cmd.rlen = 5; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* that has no big effect */ |
| if (c->delivery_system == SYS_DVBT) |
| memcpy(cmd.args, "\x89\x21\x06\x11\xff\x98", 6); |
| else if (c->delivery_system == SYS_DVBC_ANNEX_A) |
| memcpy(cmd.args, "\x89\x21\x06\x11\x89\xf0", 6); |
| else if (c->delivery_system == SYS_DVBT2) |
| memcpy(cmd.args, "\x89\x21\x06\x11\x89\x20", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 3; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| if (c->delivery_system == SYS_DVBT2) { |
| /* select PLP */ |
| cmd.args[0] = 0x52; |
| cmd.args[1] = c->stream_id & 0xff; |
| cmd.args[2] = c->stream_id == NO_STREAM_ID_FILTER ? 0 : 1; |
| cmd.wlen = 3; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| } |
| |
| memcpy(cmd.args, "\x51\x03", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 12; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x12\x08\x04", 3); |
| cmd.wlen = 3; |
| cmd.rlen = 3; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x0c\x10\x12\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x06\x10\x24\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x07\x10\x00\x24", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x0a\x10\x00\x00", 6); |
| cmd.args[4] = delivery_system | bandwidth; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* set DVB-C symbol rate */ |
| if (c->delivery_system == SYS_DVBC_ANNEX_A) { |
| memcpy(cmd.args, "\x14\x00\x02\x11", 4); |
| cmd.args[4] = ((c->symbol_rate / 1000) >> 0) & 0xff; |
| cmd.args[5] = ((c->symbol_rate / 1000) >> 8) & 0xff; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| } |
| |
| memcpy(cmd.args, "\x14\x00\x0f\x10\x10\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x09\x10\xe3\x08", 6); |
| cmd.args[5] |= dev->ts_clock_inv ? 0x00 : 0x10; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x08\x10\xd7\x05", 6); |
| cmd.args[5] |= dev->ts_clock_inv ? 0x00 : 0x10; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x01\x12\x00\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x14\x00\x01\x03\x0c\x00", 6); |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x85", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev->delivery_system = c->delivery_system; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_init(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct si2168_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, len, remaining; |
| const struct firmware *fw; |
| struct si2168_cmd cmd; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* initialize */ |
| memcpy(cmd.args, "\xc0\x12\x00\x0c\x00\x0d\x16\x00\x00\x00\x00\x00\x00", 13); |
| cmd.wlen = 13; |
| cmd.rlen = 0; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| if (dev->warm) { |
| /* resume */ |
| memcpy(cmd.args, "\xc0\x06\x08\x0f\x00\x20\x21\x01", 8); |
| cmd.wlen = 8; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| memcpy(cmd.args, "\x85", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| goto warm; |
| } |
| |
| /* power up */ |
| memcpy(cmd.args, "\xc0\x06\x01\x0f\x00\x20\x20\x01", 8); |
| cmd.wlen = 8; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* request the firmware, this will block and timeout */ |
| ret = request_firmware(&fw, dev->firmware_name, &client->dev); |
| if (ret) { |
| /* fallback mechanism to handle old name for Si2168 B40 fw */ |
| if (dev->chip_id == SI2168_CHIP_ID_B40) { |
| dev->firmware_name = SI2168_B40_FIRMWARE_FALLBACK; |
| ret = request_firmware(&fw, dev->firmware_name, |
| &client->dev); |
| } |
| |
| if (ret == 0) { |
| dev_notice(&client->dev, |
| "please install firmware file '%s'\n", |
| SI2168_B40_FIRMWARE); |
| } else { |
| dev_err(&client->dev, |
| "firmware file '%s' not found\n", |
| dev->firmware_name); |
| goto err_release_firmware; |
| } |
| } |
| |
| dev_info(&client->dev, "downloading firmware from file '%s'\n", |
| dev->firmware_name); |
| |
| if ((fw->size % 17 == 0) && (fw->data[0] > 5)) { |
| /* firmware is in the new format */ |
| for (remaining = fw->size; remaining > 0; remaining -= 17) { |
| len = fw->data[fw->size - remaining]; |
| if (len > SI2168_ARGLEN) { |
| ret = -EINVAL; |
| break; |
| } |
| memcpy(cmd.args, &fw->data[(fw->size - remaining) + 1], len); |
| cmd.wlen = len; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| break; |
| } |
| } else if (fw->size % 8 == 0) { |
| /* firmware is in the old format */ |
| for (remaining = fw->size; remaining > 0; remaining -= 8) { |
| len = 8; |
| memcpy(cmd.args, &fw->data[fw->size - remaining], len); |
| cmd.wlen = len; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| break; |
| } |
| } else { |
| /* bad or unknown firmware format */ |
| ret = -EINVAL; |
| } |
| |
| if (ret) { |
| dev_err(&client->dev, "firmware download failed %d\n", ret); |
| goto err_release_firmware; |
| } |
| |
| release_firmware(fw); |
| |
| memcpy(cmd.args, "\x01\x01", 2); |
| cmd.wlen = 2; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| /* query firmware version */ |
| memcpy(cmd.args, "\x11", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 10; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev->version = (cmd.args[9] + '@') << 24 | (cmd.args[6] - '0') << 16 | |
| (cmd.args[7] - '0') << 8 | (cmd.args[8]) << 0; |
| dev_info(&client->dev, "firmware version: %c %d.%d.%d\n", |
| dev->version >> 24 & 0xff, dev->version >> 16 & 0xff, |
| dev->version >> 8 & 0xff, dev->version >> 0 & 0xff); |
| |
| /* set ts mode */ |
| memcpy(cmd.args, "\x14\x00\x01\x10\x10\x00", 6); |
| cmd.args[4] |= dev->ts_mode; |
| if (dev->ts_clock_gapped) |
| cmd.args[4] |= 0x40; |
| cmd.wlen = 6; |
| cmd.rlen = 4; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| dev->warm = true; |
| warm: |
| /* Init stats here to indicate which stats are supported */ |
| c->cnr.len = 1; |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->post_bit_error.len = 1; |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->post_bit_count.len = 1; |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| c->block_error.len = 1; |
| c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| |
| dev->active = true; |
| |
| return 0; |
| err_release_firmware: |
| release_firmware(fw); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_sleep(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->demodulator_priv; |
| struct si2168_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| struct si2168_cmd cmd; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| dev->active = false; |
| |
| /* Firmware B 4.0-11 or later loses warm state during sleep */ |
| if (dev->version > ('B' << 24 | 4 << 16 | 0 << 8 | 11 << 0)) |
| dev->warm = false; |
| |
| memcpy(cmd.args, "\x13", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 0; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| s->min_delay_ms = 900; |
| |
| return 0; |
| } |
| |
| static int si2168_select(struct i2c_mux_core *muxc, u32 chan) |
| { |
| struct i2c_client *client = i2c_mux_priv(muxc); |
| int ret; |
| struct si2168_cmd cmd; |
| |
| /* open I2C gate */ |
| memcpy(cmd.args, "\xc0\x0d\x01", 3); |
| cmd.wlen = 3; |
| cmd.rlen = 0; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_deselect(struct i2c_mux_core *muxc, u32 chan) |
| { |
| struct i2c_client *client = i2c_mux_priv(muxc); |
| int ret; |
| struct si2168_cmd cmd; |
| |
| /* close I2C gate */ |
| memcpy(cmd.args, "\xc0\x0d\x00", 3); |
| cmd.wlen = 3; |
| cmd.rlen = 0; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct dvb_frontend_ops si2168_ops = { |
| .delsys = {SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A}, |
| .info = { |
| .name = "Silicon Labs Si2168", |
| .symbol_rate_min = 1000000, |
| .symbol_rate_max = 7200000, |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_32 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | |
| FE_CAN_QAM_256 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_MUTE_TS | |
| FE_CAN_2G_MODULATION | |
| FE_CAN_MULTISTREAM |
| }, |
| |
| .get_tune_settings = si2168_get_tune_settings, |
| |
| .init = si2168_init, |
| .sleep = si2168_sleep, |
| |
| .set_frontend = si2168_set_frontend, |
| |
| .read_status = si2168_read_status, |
| }; |
| |
| static int si2168_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct si2168_config *config = client->dev.platform_data; |
| struct si2168_dev *dev; |
| int ret; |
| struct si2168_cmd cmd; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| dev_err(&client->dev, "kzalloc() failed\n"); |
| goto err; |
| } |
| |
| i2c_set_clientdata(client, dev); |
| mutex_init(&dev->i2c_mutex); |
| |
| /* Initialize */ |
| memcpy(cmd.args, "\xc0\x12\x00\x0c\x00\x0d\x16\x00\x00\x00\x00\x00\x00", 13); |
| cmd.wlen = 13; |
| cmd.rlen = 0; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err_kfree; |
| |
| /* Power up */ |
| memcpy(cmd.args, "\xc0\x06\x01\x0f\x00\x20\x20\x01", 8); |
| cmd.wlen = 8; |
| cmd.rlen = 1; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err_kfree; |
| |
| /* Query chip revision */ |
| memcpy(cmd.args, "\x02", 1); |
| cmd.wlen = 1; |
| cmd.rlen = 13; |
| ret = si2168_cmd_execute(client, &cmd); |
| if (ret) |
| goto err_kfree; |
| |
| dev->chip_id = cmd.args[1] << 24 | cmd.args[2] << 16 | |
| cmd.args[3] << 8 | cmd.args[4] << 0; |
| |
| switch (dev->chip_id) { |
| case SI2168_CHIP_ID_A20: |
| dev->firmware_name = SI2168_A20_FIRMWARE; |
| break; |
| case SI2168_CHIP_ID_A30: |
| dev->firmware_name = SI2168_A30_FIRMWARE; |
| break; |
| case SI2168_CHIP_ID_B40: |
| dev->firmware_name = SI2168_B40_FIRMWARE; |
| break; |
| default: |
| dev_dbg(&client->dev, "unknown chip version Si21%d-%c%c%c\n", |
| cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]); |
| ret = -ENODEV; |
| goto err_kfree; |
| } |
| |
| dev->version = (cmd.args[1]) << 24 | (cmd.args[3] - '0') << 16 | |
| (cmd.args[4] - '0') << 8 | (cmd.args[5]) << 0; |
| |
| /* create mux i2c adapter for tuner */ |
| dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, |
| 1, 0, I2C_MUX_LOCKED, |
| si2168_select, si2168_deselect); |
| if (!dev->muxc) { |
| ret = -ENOMEM; |
| goto err_kfree; |
| } |
| dev->muxc->priv = client; |
| ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0); |
| if (ret) |
| goto err_kfree; |
| |
| /* create dvb_frontend */ |
| memcpy(&dev->fe.ops, &si2168_ops, sizeof(struct dvb_frontend_ops)); |
| dev->fe.demodulator_priv = client; |
| *config->i2c_adapter = dev->muxc->adapter[0]; |
| *config->fe = &dev->fe; |
| dev->ts_mode = config->ts_mode; |
| dev->ts_clock_inv = config->ts_clock_inv; |
| dev->ts_clock_gapped = config->ts_clock_gapped; |
| |
| dev_info(&client->dev, "Silicon Labs Si2168-%c%d%d successfully identified\n", |
| dev->version >> 24 & 0xff, dev->version >> 16 & 0xff, |
| dev->version >> 8 & 0xff); |
| dev_info(&client->dev, "firmware version: %c %d.%d.%d\n", |
| dev->version >> 24 & 0xff, dev->version >> 16 & 0xff, |
| dev->version >> 8 & 0xff, dev->version >> 0 & 0xff); |
| |
| return 0; |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(&client->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int si2168_remove(struct i2c_client *client) |
| { |
| struct si2168_dev *dev = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| i2c_mux_del_adapters(dev->muxc); |
| |
| dev->fe.ops.release = NULL; |
| dev->fe.demodulator_priv = NULL; |
| |
| kfree(dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id si2168_id_table[] = { |
| {"si2168", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, si2168_id_table); |
| |
| static struct i2c_driver si2168_driver = { |
| .driver = { |
| .name = "si2168", |
| .suppress_bind_attrs = true, |
| }, |
| .probe = si2168_probe, |
| .remove = si2168_remove, |
| .id_table = si2168_id_table, |
| }; |
| |
| module_i2c_driver(si2168_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Silicon Labs Si2168 DVB-T/T2/C demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(SI2168_A20_FIRMWARE); |
| MODULE_FIRMWARE(SI2168_A30_FIRMWARE); |
| MODULE_FIRMWARE(SI2168_B40_FIRMWARE); |