[ALSA] emu10k1: Add support for Audigy4 (not Pro)
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
index 186e00a..884bbf5 100644
--- a/include/sound/emu10k1.h
+++ b/include/sound/emu10k1.h
@@ -245,6 +245,7 @@
#define A_IOCFG_GPOUT0 0x0044 /* analog/digital */
#define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */
#define A_IOCFG_ENABLE_DIGITAL 0x0004
+#define A_IOCFG_ENABLE_DIGITAL_AUDIGY4 0x0080
#define A_IOCFG_UNKNOWN_20 0x0020
#define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */
#define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */
@@ -1065,6 +1066,7 @@
unsigned char emu1212m; /* EMU 1212m card */
unsigned char spi_dac; /* SPI interface for DAC */
unsigned char i2c_adc; /* I2C interface for ADC */
+ unsigned char adc_1361t; /* Use Philips 1361T ADC */
const char *driver;
const char *name;
const char *id; /* for backward compatibility - can be NULL if not needed */
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index d052007..4544f6a 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -563,7 +563,7 @@
};
static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
- AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0);
+ AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_MIC, 6, 1, 0);
static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"};
@@ -605,7 +605,7 @@
AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0),
AC97_ENUM("Mono Output Select", std_enum[2]),
-AC97_ENUM("Mic Select", std_enum[3]),
+AC97_ENUM("Mic Select Capture Switch", std_enum[3]),
AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
};
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 4d9cf37..7ae7bc6 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -563,7 +563,7 @@
AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1),
AC97_ENUM("Mic Select Source", wm9711_enum[7]),
AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 32, 1),
-AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0),
+AC97_SINGLE("Mic 20dB Boost Capture Switch", AC97_MIC, 7, 1, 0),
AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0),
AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0),
@@ -653,7 +653,7 @@
AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1),
AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1),
AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1),
-AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0),
+AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_LINE, 5, 1, 0),
AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]),
AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1),
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 6bfa084..e71485c 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -777,14 +777,6 @@
static struct snd_emu_chip_details emu_chip_details[] = {
/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
- /* Audigy4 SB0400 */
- {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
- .driver = "Audigy2", .name = "Audigy 4 [SB0400]",
- .id = "Audigy2",
- .emu10k2_chip = 1,
- .ca0108_chip = 1,
- .spk71 = 1,
- .ac97_chip = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
/* DSP: CA0108-IAT
* DAC: CS4382-KQ
@@ -799,13 +791,59 @@
.ca0108_chip = 1,
.spk71 = 1,
.ac97_chip = 1} ,
+ /* Audigy4 (Not PRO) SB0610 */
+ /* Tested by James@superbug.co.uk 4th April 2006 */
+ /* A_IOCFG bits
+ * Output
+ * 0: ?
+ * 1: ?
+ * 2: ?
+ * 3: 0 - Digital Out, 1 - Line in
+ * 4: ?
+ * 5: ?
+ * 6: ?
+ * 7: ?
+ * Input
+ * 8: ?
+ * 9: ?
+ * A: Green jack sense (Front)
+ * B: ?
+ * C: Black jack sense (Rear/Side Right)
+ * D: Yellow jack sense (Center/LFE/Side Left)
+ * E: ?
+ * F: ?
+ *
+ * Digital Out/Line in switch using A_IOCFG bit 3 (0x08)
+ * 0 - Digital Out
+ * 1 - Line in
+ */
+ /* Mic input not tested.
+ * Analog CD input not tested
+ * Digital Out not tested.
+ * Line in working.
+ * Audio output 5.1 working. Side outputs not working.
+ */
+ /* DSP: CA10300-IAT LF
+ * DAC: Cirrus Logic CS4382-KQZ
+ * ADC: Philips 1361T
+ * AC97: Sigmatel STAC9750
+ * CA0151: None
+ */
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
+ .driver = "Audigy2", .name = "Audigy 4 [SB0610]",
+ .id = "Audigy2",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .spk71 = 1,
+ .adc_1361t = 1, /* 24 bit capture instead of 16bit */
+ .ac97_chip = 1} ,
/* Audigy 2 ZS Notebook Cardbus card.*/
/* Tested by James@superbug.co.uk 22th December 2005 */
/* Audio output 7.1/Headphones working.
* Digital output working. (AC3 not checked, only PCM)
* Audio inputs not tested.
*/
- /* DSP: Tiny2
+ /* DSP: Tina2
* DAC: Wolfson WM8768/WM8568
* ADC: Wolfson WM8775
* AC97: None
diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c
index 2a9d12d..c31f3d0 100644
--- a/sound/pci/emu10k1/emumixer.c
+++ b/sound/pci/emu10k1/emumixer.c
@@ -777,6 +777,8 @@
};
static char *audigy_remove_ctls[] = {
/* Master/PCM controls on ac97 of Audigy has no effect */
+ /* On the Audigy2 the AC97 playback is piped into
+ * the Philips ADC for 24bit capture */
"PCM Playback Switch",
"PCM Playback Volume",
"Master Mono Playback Switch",
@@ -804,6 +806,47 @@
"AMic Playback Volume", "Mic Playback Volume",
NULL
};
+ static char *audigy_remove_ctls_1361t_adc[] = {
+ /* On the Audigy2 the AC97 playback is piped into
+ * the Philips ADC for 24bit capture */
+ "PCM Playback Switch",
+ "PCM Playback Volume",
+ "Master Mono Playback Switch",
+ "Master Mono Playback Volume",
+ "Capture Source",
+ "Capture Switch",
+ "Capture Volume",
+ "Mic Capture Volume",
+ "Headphone Playback Switch",
+ "Headphone Playback Volume",
+ "3D Control - Center",
+ "3D Control - Depth",
+ "3D Control - Switch",
+ "Line2 Playback Volume",
+ "Line2 Capture Volume",
+ NULL
+ };
+ static char *audigy_rename_ctls_1361t_adc[] = {
+ "Master Playback Switch", "Master Capture Switch",
+ "Master Playback Volume", "Master Capture Volume",
+ "Wave Master Playback Volume", "Master Playback Volume",
+ "PC Speaker Playback Switch", "PC Speaker Capture Switch",
+ "PC Speaker Playback Volume", "PC Speaker Capture Volume",
+ "Phone Playback Switch", "Phone Capture Switch",
+ "Phone Playback Volume", "Phone Capture Volume",
+ "Mic Playback Switch", "Mic Capture Switch",
+ "Mic Playback Volume", "Mic Capture Volume",
+ "Line Playback Switch", "Line Capture Switch",
+ "Line Playback Volume", "Line Capture Volume",
+ "CD Playback Switch", "CD Capture Switch",
+ "CD Playback Volume", "CD Capture Volume",
+ "Aux Playback Switch", "Aux Capture Switch",
+ "Aux Playback Volume", "Aux Capture Volume",
+ "Video Playback Switch", "Video Capture Switch",
+ "Video Playback Volume", "Video Capture Volume",
+
+ NULL
+ };
if (emu->card_capabilities->ac97_chip) {
struct snd_ac97_bus *pbus;
@@ -834,7 +877,10 @@
snd_ac97_write_cache(emu->ac97, AC97_MASTER, 0x0000);
/* set capture source to mic */
snd_ac97_write_cache(emu->ac97, AC97_REC_SEL, 0x0000);
- c = audigy_remove_ctls;
+ if (emu->card_capabilities->adc_1361t)
+ c = audigy_remove_ctls_1361t_adc;
+ else
+ c = audigy_remove_ctls;
} else {
/*
* Credits for cards based on STAC9758:
@@ -863,11 +909,15 @@
}
if (emu->audigy)
- c = audigy_rename_ctls;
+ if (emu->card_capabilities->adc_1361t)
+ c = audigy_rename_ctls_1361t_adc;
+ else
+ c = audigy_rename_ctls;
else
c = emu10k1_rename_ctls;
for (; *c; c += 2)
rename_ctl(card, c[0], c[1]);
+
if (emu->card_capabilities->subsystem == 0x20071102) { /* Audigy 4 Pro */
rename_ctl(card, "Line2 Capture Volume", "Line1/Mic Capture Volume");
rename_ctl(card, "Analog Mix Capture Volume", "Line2 Capture Volume");
diff --git a/sound/pci/emu10k1/tina2.h b/sound/pci/emu10k1/tina2.h
index 5c43abf..f2d8eb6 100644
--- a/sound/pci/emu10k1/tina2.h
+++ b/sound/pci/emu10k1/tina2.h
@@ -1,11 +1,7 @@
/*
* Copyright (c) by James Courtier-Dutton <James@superbug.demon.co.uk>
- * Driver p16v chips
- * Version: 0.21
- *
- *
- * This code was initally based on code from ALSA's emu10k1x.c which is:
- * Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
+ * Driver tina2 chips
+ * Version: 0.1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by