[SCSI] a3000: Reindentation
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index 2915684..31434f7 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -19,26 +19,26 @@
#include "wd33c93.h"
#include "a3000.h"
-#include<linux/stat.h>
+#include <linux/stat.h>
-#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base))
-#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
+
+#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base))
+#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
static struct Scsi_Host *a3000_host = NULL;
static int a3000_release(struct Scsi_Host *instance);
-static irqreturn_t a3000_intr (int irq, void *dummy)
+static irqreturn_t a3000_intr(int irq, void *dummy)
{
unsigned long flags;
unsigned int status = DMA(a3000_host)->ISTR;
if (!(status & ISTR_INT_P))
return IRQ_NONE;
- if (status & ISTR_INTS)
- {
+ if (status & ISTR_INTS) {
spin_lock_irqsave(a3000_host->host_lock, flags);
- wd33c93_intr (a3000_host);
+ wd33c93_intr(a3000_host);
spin_unlock_irqrestore(a3000_host->host_lock, flags);
return IRQ_HANDLED;
}
@@ -48,161 +48,161 @@
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
- unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
- unsigned long addr = virt_to_bus(cmd->SCp.ptr);
+ unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
+ unsigned long addr = virt_to_bus(cmd->SCp.ptr);
- /*
- * if the physical address has the wrong alignment, or if
- * physical address is bad, or if it is a write and at the
- * end of a physical memory chunk, then allocate a bounce
- * buffer
- */
- if (addr & A3000_XFER_MASK)
- {
- HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
- & ~0x1ff;
- HDATA(a3000_host)->dma_bounce_buffer =
- kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL);
-
- /* can't allocate memory; use PIO */
- if (!HDATA(a3000_host)->dma_bounce_buffer) {
- HDATA(a3000_host)->dma_bounce_len = 0;
- return 1;
+ /*
+ * if the physical address has the wrong alignment, or if
+ * physical address is bad, or if it is a write and at the
+ * end of a physical memory chunk, then allocate a bounce
+ * buffer
+ */
+ if (addr & A3000_XFER_MASK) {
+ HDATA(a3000_host)->dma_bounce_len =
+ (cmd->SCp.this_residual + 511) & ~0x1ff;
+ HDATA(a3000_host)->dma_bounce_buffer =
+ kmalloc(HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL);
+
+ /* can't allocate memory; use PIO */
+ if (!HDATA(a3000_host)->dma_bounce_buffer) {
+ HDATA(a3000_host)->dma_bounce_len = 0;
+ return 1;
+ }
+
+ if (!dir_in) {
+ /* copy to bounce buffer for a write */
+ memcpy(HDATA(a3000_host)->dma_bounce_buffer,
+ cmd->SCp.ptr, cmd->SCp.this_residual);
+ }
+
+ addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer);
}
- if (!dir_in) {
- /* copy to bounce buffer for a write */
- memcpy (HDATA(a3000_host)->dma_bounce_buffer,
- cmd->SCp.ptr, cmd->SCp.this_residual);
+ /* setup dma direction */
+ if (!dir_in)
+ cntr |= CNTR_DDIR;
+
+ /* remember direction */
+ HDATA(a3000_host)->dma_dir = dir_in;
+
+ DMA(a3000_host)->CNTR = cntr;
+
+ /* setup DMA *physical* address */
+ DMA(a3000_host)->ACR = addr;
+
+ if (dir_in) {
+ /* invalidate any cache */
+ cache_clear(addr, cmd->SCp.this_residual);
+ } else {
+ /* push any dirty cache */
+ cache_push(addr, cmd->SCp.this_residual);
}
- addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer);
- }
+ /* start DMA */
+ mb(); /* make sure setup is completed */
+ DMA(a3000_host)->ST_DMA = 1;
+ mb(); /* make sure DMA has started before next IO */
- /* setup dma direction */
- if (!dir_in)
- cntr |= CNTR_DDIR;
-
- /* remember direction */
- HDATA(a3000_host)->dma_dir = dir_in;
-
- DMA(a3000_host)->CNTR = cntr;
-
- /* setup DMA *physical* address */
- DMA(a3000_host)->ACR = addr;
-
- if (dir_in)
- /* invalidate any cache */
- cache_clear (addr, cmd->SCp.this_residual);
- else
- /* push any dirty cache */
- cache_push (addr, cmd->SCp.this_residual);
-
- /* start DMA */
- mb(); /* make sure setup is completed */
- DMA(a3000_host)->ST_DMA = 1;
- mb(); /* make sure DMA has started before next IO */
-
- /* return success */
- return 0;
+ /* return success */
+ return 0;
}
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- /* disable SCSI interrupts */
- unsigned short cntr = CNTR_PDMD;
+ /* disable SCSI interrupts */
+ unsigned short cntr = CNTR_PDMD;
- if (!HDATA(instance)->dma_dir)
- cntr |= CNTR_DDIR;
+ if (!HDATA(instance)->dma_dir)
+ cntr |= CNTR_DDIR;
- DMA(instance)->CNTR = cntr;
- mb(); /* make sure CNTR is updated before next IO */
+ DMA(instance)->CNTR = cntr;
+ mb(); /* make sure CNTR is updated before next IO */
- /* flush if we were reading */
- if (HDATA(instance)->dma_dir) {
- DMA(instance)->FLUSH = 1;
- mb(); /* don't allow prefetch */
- while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
- barrier();
- mb(); /* no IO until FLUSH is done */
- }
-
- /* clear a possible interrupt */
- /* I think that this CINT is only necessary if you are
- * using the terminal count features. HM 7 Mar 1994
- */
- DMA(instance)->CINT = 1;
-
- /* stop DMA */
- DMA(instance)->SP_DMA = 1;
- mb(); /* make sure DMA is stopped before next IO */
-
- /* restore the CONTROL bits (minus the direction flag) */
- DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
- mb(); /* make sure CNTR is updated before next IO */
-
- /* copy from a bounce buffer, if necessary */
- if (status && HDATA(instance)->dma_bounce_buffer) {
- if (SCpnt) {
- if (HDATA(instance)->dma_dir && SCpnt)
- memcpy (SCpnt->SCp.ptr,
- HDATA(instance)->dma_bounce_buffer,
- SCpnt->SCp.this_residual);
- kfree (HDATA(instance)->dma_bounce_buffer);
- HDATA(instance)->dma_bounce_buffer = NULL;
- HDATA(instance)->dma_bounce_len = 0;
- } else {
- kfree (HDATA(instance)->dma_bounce_buffer);
- HDATA(instance)->dma_bounce_buffer = NULL;
- HDATA(instance)->dma_bounce_len = 0;
+ /* flush if we were reading */
+ if (HDATA(instance)->dma_dir) {
+ DMA(instance)->FLUSH = 1;
+ mb(); /* don't allow prefetch */
+ while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
+ barrier();
+ mb(); /* no IO until FLUSH is done */
}
- }
+
+ /* clear a possible interrupt */
+ /* I think that this CINT is only necessary if you are
+ * using the terminal count features. HM 7 Mar 1994
+ */
+ DMA(instance)->CINT = 1;
+
+ /* stop DMA */
+ DMA(instance)->SP_DMA = 1;
+ mb(); /* make sure DMA is stopped before next IO */
+
+ /* restore the CONTROL bits (minus the direction flag) */
+ DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
+ mb(); /* make sure CNTR is updated before next IO */
+
+ /* copy from a bounce buffer, if necessary */
+ if (status && HDATA(instance)->dma_bounce_buffer) {
+ if (SCpnt) {
+ if (HDATA(instance)->dma_dir && SCpnt)
+ memcpy(SCpnt->SCp.ptr,
+ HDATA(instance)->dma_bounce_buffer,
+ SCpnt->SCp.this_residual);
+ kfree(HDATA(instance)->dma_bounce_buffer);
+ HDATA(instance)->dma_bounce_buffer = NULL;
+ HDATA(instance)->dma_bounce_len = 0;
+ } else {
+ kfree(HDATA(instance)->dma_bounce_buffer);
+ HDATA(instance)->dma_bounce_buffer = NULL;
+ HDATA(instance)->dma_bounce_len = 0;
+ }
+ }
}
static int __init a3000_detect(struct scsi_host_template *tpnt)
{
- wd33c93_regs regs;
+ wd33c93_regs regs;
- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
- return 0;
- if (!request_mem_region(0xDD0000, 256, "wd33c93"))
- return 0;
+ if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
+ return 0;
+ if (!request_mem_region(0xDD0000, 256, "wd33c93"))
+ return 0;
- tpnt->proc_name = "A3000";
- tpnt->proc_info = &wd33c93_proc_info;
+ tpnt->proc_name = "A3000";
+ tpnt->proc_info = &wd33c93_proc_info;
- a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata));
- if (a3000_host == NULL)
- goto fail_register;
+ a3000_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
+ if (a3000_host == NULL)
+ goto fail_register;
- a3000_host->base = ZTWO_VADDR(0xDD0000);
- a3000_host->irq = IRQ_AMIGA_PORTS;
- DMA(a3000_host)->DAWR = DAWR_A3000;
- regs.SASR = &(DMA(a3000_host)->SASR);
- regs.SCMD = &(DMA(a3000_host)->SCMD);
- HDATA(a3000_host)->no_sync = 0xff;
- HDATA(a3000_host)->fast = 0;
- HDATA(a3000_host)->dma_mode = CTRL_DMA;
- wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
- if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
- a3000_intr))
- goto fail_irq;
- DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
+ a3000_host->base = ZTWO_VADDR(0xDD0000);
+ a3000_host->irq = IRQ_AMIGA_PORTS;
+ DMA(a3000_host)->DAWR = DAWR_A3000;
+ regs.SASR = &(DMA(a3000_host)->SASR);
+ regs.SCMD = &(DMA(a3000_host)->SCMD);
+ HDATA(a3000_host)->no_sync = 0xff;
+ HDATA(a3000_host)->fast = 0;
+ HDATA(a3000_host)->dma_mode = CTRL_DMA;
+ wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
+ if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
+ a3000_intr))
+ goto fail_irq;
+ DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
- return 1;
+ return 1;
fail_irq:
- scsi_unregister(a3000_host);
+ scsi_unregister(a3000_host);
fail_register:
- release_mem_region(0xDD0000, 256);
- return 0;
+ release_mem_region(0xDD0000, 256);
+ return 0;
}
static int a3000_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
-
+
/* FIXME 2: kill this entire function, which should
cause mid-layer to call wd33c93_host_reset anyway? */
@@ -236,10 +236,10 @@
static int a3000_release(struct Scsi_Host *instance)
{
- DMA(instance)->CNTR = 0;
- release_mem_region(0xDD0000, 256);
- free_irq(IRQ_AMIGA_PORTS, a3000_intr);
- return 1;
+ DMA(instance)->CNTR = 0;
+ release_mem_region(0xDD0000, 256);
+ free_irq(IRQ_AMIGA_PORTS, a3000_intr);
+ return 1;
}
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h
index c7afe16..684813e 100644
--- a/drivers/scsi/a3000.h
+++ b/drivers/scsi/a3000.h
@@ -12,40 +12,40 @@
#include <linux/types.h>
#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
+#define CMD_PER_LUN 2
#endif
#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
+#define CAN_QUEUE 16
#endif
/*
* if the transfer address ANDed with this results in a non-zero
* result, then we can't use DMA.
*/
-#define A3000_XFER_MASK (0x00000003)
+#define A3000_XFER_MASK (0x00000003)
typedef struct {
- unsigned char pad1[2];
- volatile unsigned short DAWR;
- volatile unsigned int WTC;
- unsigned char pad2[2];
- volatile unsigned short CNTR;
- volatile unsigned long ACR;
- unsigned char pad3[2];
- volatile unsigned short ST_DMA;
- unsigned char pad4[2];
- volatile unsigned short FLUSH;
- unsigned char pad5[2];
- volatile unsigned short CINT;
- unsigned char pad6[2];
- volatile unsigned short ISTR;
- unsigned char pad7[30];
- volatile unsigned short SP_DMA;
- unsigned char pad8;
- volatile unsigned char SASR;
- unsigned char pad9;
- volatile unsigned char SCMD;
+ unsigned char pad1[2];
+ volatile unsigned short DAWR;
+ volatile unsigned int WTC;
+ unsigned char pad2[2];
+ volatile unsigned short CNTR;
+ volatile unsigned long ACR;
+ unsigned char pad3[2];
+ volatile unsigned short ST_DMA;
+ unsigned char pad4[2];
+ volatile unsigned short FLUSH;
+ unsigned char pad5[2];
+ volatile unsigned short CINT;
+ unsigned char pad6[2];
+ volatile unsigned short ISTR;
+ unsigned char pad7[30];
+ volatile unsigned short SP_DMA;
+ unsigned char pad8;
+ volatile unsigned char SASR;
+ unsigned char pad9;
+ volatile unsigned char SCMD;
} a3000_scsiregs;
#define DAWR_A3000 (3)