Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-mips/sn/kldir.h b/include/asm-mips/sn/kldir.h
new file mode 100644
index 0000000..f0efab1
--- /dev/null
+++ b/include/asm-mips/sn/kldir.h
@@ -0,0 +1,248 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLDIR_H
+#define _ASM_SN_KLDIR_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SGI_IO)
+#include <asm/hack.h>
+#endif
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas. This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them. Indices in the array are
+ * permanently dedicated to areas listed below. Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+#define KLDIR_MAGIC 0x434d5f53505f5357
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ * MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M) +-----------------------------------------+
+ * | IO6 BUFFERS FOR FLASH ENET IOC3 |
+ * 0x1F80000 (31.5M) +-----------------------------------------+
+ * | IO6 TEXT/DATA/BSS/stack |
+ * 0x1C00000 (30M) +-----------------------------------------+
+ * | IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M) +-----------------------------------------+
+ * | IP27 PROM TEXT/DATA/BSS/stack |
+ * 0x1B00000 (27M) +-----------------------------------------+
+ * | IP27 CFG |
+ * 0x1A00000 (26M) +-----------------------------------------+
+ * | Graphics PROM |
+ * 0x1800000 (24M) +-----------------------------------------+
+ * | 3rd Party PROM drivers |
+ * 0x1600000 (22M) +-----------------------------------------+
+ * | |
+ * | Free |
+ * | |
+ * +-----------------------------------------+
+ * | UNIX DEBUG Version |
+ * 0x190000 (2M--) +-----------------------------------------+
+ * | SYMMON |
+ * | (For UNIX Debug only) |
+ * 0x34000 (208K) +-----------------------------------------+
+ * | SYMMON STACK [NUM_CPU_PER_NODE] |
+ * | (For UNIX Debug only) |
+ * 0x25000 (148K) +-----------------------------------------+
+ * | KLCONFIG - II (temp) |
+ * | |
+ * | ---------------------------- |
+ * | |
+ * | UNIX NON-DEBUG Version |
+ * 0x19000 (100K) +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K) +-----------------------------------------+
+ * | |
+ * | PI Error Spools (32K) |
+ * | |
+ * 0x12000 (72K) +-----------------------------------------+
+ * | Unused |
+ * 0x11c00 (71K) +-----------------------------------------+
+ * | CPU 1 NMI Eframe area |
+ * 0x11a00 (70.5K) +-----------------------------------------+
+ * | CPU 0 NMI Eframe area |
+ * 0x11800 (70K) +-----------------------------------------+
+ * | CPU 1 NMI Register save area |
+ * 0x11600 (69.5K) +-----------------------------------------+
+ * | CPU 0 NMI Register save area |
+ * 0x11400 (69K) +-----------------------------------------+
+ * | GDA (1k) |
+ * 0x11000 (68K) +-----------------------------------------+
+ * | Early cache Exception stack |
+ * | and/or |
+ * | kernel/io6prom nmi registers |
+ * 0x10800 (66k) +-----------------------------------------+
+ * | cache error eframe |
+ * 0x10400 (65K) +-----------------------------------------+
+ * | Exception Handlers (UALIAS copy) |
+ * 0x10000 (64K) +-----------------------------------------+
+ * | |
+ * | |
+ * | KLCONFIG - I (permanent) (48K) |
+ * | |
+ * | |
+ * | |
+ * 0x4000 (16K) +-----------------------------------------+
+ * | NMI Handler (Protected Page) |
+ * 0x3000 (12K) +-----------------------------------------+
+ * | ARCS PVECTORS (master node only) |
+ * 0x2c00 (11K) +-----------------------------------------+
+ * | ARCS TVECTORS (master node only) |
+ * 0x2800 (10K) +-----------------------------------------+
+ * | LAUNCH [NUM_CPU] |
+ * 0x2400 (9K) +-----------------------------------------+
+ * | Low memory directory (KLDIR) |
+ * 0x2000 (8K) +-----------------------------------------+
+ * | ARCS SPB (1K) |
+ * 0x1000 (4K) +-----------------------------------------+
+ * | Early cache Exception stack |
+ * | and/or |
+ * | kernel/io6prom nmi registers |
+ * 0x800 (2k) +-----------------------------------------+
+ * | cache error eframe |
+ * 0x400 (1K) +-----------------------------------------+
+ * | Exception Handlers |
+ * 0x0 (0K) +-----------------------------------------+
+ */
+
+#ifdef __ASSEMBLY__
+#define KLDIR_OFF_MAGIC 0x00
+#define KLDIR_OFF_OFFSET 0x08
+#define KLDIR_OFF_POINTER 0x10
+#define KLDIR_OFF_SIZE 0x18
+#define KLDIR_OFF_COUNT 0x20
+#define KLDIR_OFF_STRIDE 0x28
+#endif /* __ASSEMBLY__ */
+
+#if !defined(CONFIG_SGI_IO)
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here. Since it's set up in the prom. We can't redefine it later
+ * and expect more space to be allocated. The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE 0x8000
+
+#if defined (PROM) || defined (SABLE)
+
+/*
+ * These defines are prom version dependent. No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET 0x2400
+#define IP27_LAUNCH_SIZE 0x400
+#define IP27_LAUNCH_COUNT 2
+#define IP27_LAUNCH_STRIDE 0x200
+
+#define IP27_KLCONFIG_OFFSET 0x4000
+#define IP27_KLCONFIG_SIZE 0xc000
+#define IP27_KLCONFIG_COUNT 1
+#define IP27_KLCONFIG_STRIDE 0
+
+#define IP27_NMI_OFFSET 0x3000
+#define IP27_NMI_SIZE 0x40
+#define IP27_NMI_COUNT 2
+#define IP27_NMI_STRIDE 0x40
+
+#define IP27_PI_ERROR_OFFSET 0x12000
+#define IP27_PI_ERROR_SIZE 0x4000
+#define IP27_PI_ERROR_COUNT 1
+#define IP27_PI_ERROR_STRIDE 0
+
+#define IP27_SYMMON_STK_OFFSET 0x25000
+#define IP27_SYMMON_STK_SIZE 0xe000
+#define IP27_SYMMON_STK_COUNT 2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE 0x7000
+
+#define IP27_FREEMEM_OFFSET 0x19000
+#define IP27_FREEMEM_SIZE -1
+#define IP27_FREEMEM_COUNT 1
+#define IP27_FREEMEM_STRIDE 0
+
+#endif /* PROM || SABLE*/
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET 0x11000
+#define IO6_GDA_SIZE 0x400
+#define IO6_GDA_COUNT 1
+#define IO6_GDA_STRIDE 0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET 0x11400
+#define IP27_NMI_KREGS_CPU_SIZE 0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET 0x11800
+#define IP27_NMI_EFRAME_SIZE 0x200
+
+#define KLDIR_ENT_SIZE 0x40
+#define KLDIR_MAX_ENTRIES (0x400 / 0x40)
+
+#endif /* !CONFIG_SGI_IO */
+
+#ifndef __ASSEMBLY__
+typedef struct kldir_ent_s {
+ u64 magic; /* Indicates validity of entry */
+ off_t offset; /* Offset from start of node space */
+#if defined(CONFIG_SGI_IO) /* FIXME */
+ __psunsigned_t pointer; /* Pointer to area in some cases */
+#else
+ unsigned long pointer; /* Pointer to area in some cases */
+#endif
+ size_t size; /* Size in bytes */
+ u64 count; /* Repeat count if array, 1 if not */
+ size_t stride; /* Stride if array, 0 if not */
+ char rsvd[16]; /* Pad entry to 0x40 bytes */
+ /* NOTE: These 16 bytes are used in the Partition KLDIR
+ entry to store partition info. Refer to klpart.h for this. */
+} kldir_ent_t;
+#endif /* !__ASSEMBLY__ */
+
+#if defined(CONFIG_SGI_IO)
+
+#define KLDIR_ENT_SIZE 0x40
+#define KLDIR_MAX_ENTRIES (0x400 / 0x40)
+
+/*
+ * The actual offsets of each memory area are machine-dependent
+ */
+#ifdef CONFIG_SGI_IP27
+// Not yet #include <asm/sn/sn0/kldir.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/kldir.h>
+#else
+#error "kldir.h is currently defined for IP27 and IP35 platforms only"
+#endif
+
+#endif /* CONFIG_SGI_IO */
+
+#endif /* _ASM_SN_KLDIR_H */