Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/asm-arm/hardware/amba_clcd.h
new file mode 100644
index 0000000..2149be7
--- /dev/null
+++ b/include/asm-arm/hardware/amba_clcd.h
@@ -0,0 +1,264 @@
+/*
+ * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
+ *
+ * David A Rusling
+ *
+ * Copyright (C) 2001 ARM Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/fb.h>
+
+/*
+ * CLCD Controller Internal Register addresses
+ */
+#define CLCD_TIM0 0x00000000
+#define CLCD_TIM1 0x00000004
+#define CLCD_TIM2 0x00000008
+#define CLCD_TIM3 0x0000000c
+#define CLCD_UBAS 0x00000010
+#define CLCD_LBAS 0x00000014
+
+#ifndef CONFIG_ARCH_VERSATILE
+#define CLCD_IENB 0x00000018
+#define CLCD_CNTL 0x0000001c
+#else
+/*
+ * Someone rearranged these two registers on the Versatile
+ * platform...
+ */
+#define CLCD_IENB 0x0000001c
+#define CLCD_CNTL 0x00000018
+#endif
+
+#define CLCD_STAT 0x00000020
+#define CLCD_INTR 0x00000024
+#define CLCD_UCUR 0x00000028
+#define CLCD_LCUR 0x0000002C
+#define CLCD_PALL 0x00000200
+#define CLCD_PALETTE 0x00000200
+
+#define TIM2_CLKSEL (1 << 5)
+#define TIM2_IVS (1 << 11)
+#define TIM2_IHS (1 << 12)
+#define TIM2_IPC (1 << 13)
+#define TIM2_IOE (1 << 14)
+#define TIM2_BCD (1 << 26)
+
+#define CNTL_LCDEN (1 << 0)
+#define CNTL_LCDBPP1 (0 << 1)
+#define CNTL_LCDBPP2 (1 << 1)
+#define CNTL_LCDBPP4 (2 << 1)
+#define CNTL_LCDBPP8 (3 << 1)
+#define CNTL_LCDBPP16 (4 << 1)
+#define CNTL_LCDBPP24 (5 << 1)
+#define CNTL_LCDBW (1 << 4)
+#define CNTL_LCDTFT (1 << 5)
+#define CNTL_LCDMONO8 (1 << 6)
+#define CNTL_LCDDUAL (1 << 7)
+#define CNTL_BGR (1 << 8)
+#define CNTL_BEBO (1 << 9)
+#define CNTL_BEPO (1 << 10)
+#define CNTL_LCDPWR (1 << 11)
+#define CNTL_LCDVCOMP(x) ((x) << 12)
+#define CNTL_LDMAFIFOTIME (1 << 15)
+#define CNTL_WATERMARK (1 << 16)
+
+struct clcd_panel {
+ struct fb_videomode mode;
+ signed short width; /* width in mm */
+ signed short height; /* height in mm */
+ u32 tim2;
+ u32 tim3;
+ u32 cntl;
+ unsigned int bpp:8,
+ fixedtimings:1,
+ grayscale:1;
+ unsigned int connector;
+};
+
+struct clcd_regs {
+ u32 tim0;
+ u32 tim1;
+ u32 tim2;
+ u32 tim3;
+ u32 cntl;
+ unsigned long pixclock;
+};
+
+struct clcd_fb;
+
+/*
+ * the board-type specific routines
+ */
+struct clcd_board {
+ const char *name;
+
+ /*
+ * Optional. Check whether the var structure is acceptable
+ * for this display.
+ */
+ int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
+
+ /*
+ * Compulsary. Decode fb->fb.var into regs->*. In the case of
+ * fixed timing, set regs->* to the register values required.
+ */
+ void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
+
+ /*
+ * Optional. Disable any extra display hardware.
+ */
+ void (*disable)(struct clcd_fb *);
+
+ /*
+ * Optional. Enable any extra display hardware.
+ */
+ void (*enable)(struct clcd_fb *);
+
+ /*
+ * Setup platform specific parts of CLCD driver
+ */
+ int (*setup)(struct clcd_fb *);
+
+ /*
+ * mmap the framebuffer memory
+ */
+ int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
+
+ /*
+ * Remove platform specific parts of CLCD driver
+ */
+ void (*remove)(struct clcd_fb *);
+};
+
+struct amba_device;
+struct clk;
+
+/* this data structure describes each frame buffer device we find */
+struct clcd_fb {
+ struct fb_info fb;
+ struct amba_device *dev;
+ struct clk *clk;
+ struct clcd_panel *panel;
+ struct clcd_board *board;
+ void *board_data;
+ void __iomem *regs;
+ u32 clcd_cntl;
+ u32 cmap[16];
+};
+
+static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+ u32 val;
+
+ /*
+ * Program the CLCD controller registers and start the CLCD
+ */
+ val = ((fb->fb.var.xres / 16) - 1) << 2;
+ val |= (fb->fb.var.hsync_len - 1) << 8;
+ val |= (fb->fb.var.right_margin - 1) << 16;
+ val |= (fb->fb.var.left_margin - 1) << 24;
+ regs->tim0 = val;
+
+ val = fb->fb.var.yres - 1;
+ val |= (fb->fb.var.vsync_len - 1) << 10;
+ val |= fb->fb.var.lower_margin << 16;
+ val |= fb->fb.var.upper_margin << 24;
+ regs->tim1 = val;
+
+ val = fb->panel->tim2;
+ val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
+ val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
+
+ if (fb->panel->cntl & CNTL_LCDTFT)
+ val |= (fb->fb.var.xres_virtual - 1) << 16;
+ else if (fb->panel->cntl & CNTL_LCDBW)
+ printk("what value for CPL for stnmono panels?");
+ else
+ val |= ((fb->fb.var.xres_virtual * 8 / 3) - 1) << 16;
+ regs->tim2 = val;
+
+ regs->tim3 = fb->panel->tim3;
+
+ val = fb->panel->cntl;
+ if (fb->fb.var.grayscale)
+ val |= CNTL_LCDBW;
+
+ switch (fb->fb.var.bits_per_pixel) {
+ case 1:
+ val |= CNTL_LCDBPP1;
+ break;
+ case 2:
+ val |= CNTL_LCDBPP2;
+ break;
+ case 4:
+ val |= CNTL_LCDBPP4;
+ break;
+ case 8:
+ val |= CNTL_LCDBPP8;
+ break;
+ case 16:
+ val |= CNTL_LCDBPP16;
+ break;
+ case 24:
+ val |= CNTL_LCDBPP24;
+ break;
+ }
+
+ regs->cntl = val;
+ regs->pixclock = fb->fb.var.pixclock;
+}
+
+static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+ var->xres_virtual = var->xres = (var->xres + 7) & ~7;
+ var->yres_virtual = var->yres;
+
+#define CHECK(e,l,h) (var->e < l || var->e > h)
+ if (CHECK(right_margin, (5+1), 256) || /* back porch */
+ CHECK(left_margin, (5+1), 256) || /* front porch */
+ CHECK(hsync_len, (5+1), 256) ||
+ var->xres > 4096 ||
+ var->lower_margin > 255 || /* back porch */
+ var->upper_margin > 255 || /* front porch */
+ var->vsync_len > 32 ||
+ var->yres > 1024)
+ return -EINVAL;
+#undef CHECK
+
+ /* single panel mode: PCD = max(PCD, 1) */
+ /* dual panel mode: PCD = max(PCD, 5) */
+
+ /*
+ * You can't change the grayscale setting, and
+ * we can only do non-interlaced video.
+ */
+ if (var->grayscale != fb->fb.var.grayscale ||
+ (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+ return -EINVAL;
+
+#define CHECK(e) (var->e != fb->fb.var.e)
+ if (fb->panel->fixedtimings &&
+ (CHECK(xres) ||
+ CHECK(yres) ||
+ CHECK(bits_per_pixel) ||
+ CHECK(pixclock) ||
+ CHECK(left_margin) ||
+ CHECK(right_margin) ||
+ CHECK(upper_margin) ||
+ CHECK(lower_margin) ||
+ CHECK(hsync_len) ||
+ CHECK(vsync_len) ||
+ CHECK(sync)))
+ return -EINVAL;
+#undef CHECK
+
+ var->nonstd = 0;
+ var->accel_flags = 0;
+
+ return 0;
+}