Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
new file mode 100644
index 0000000..1cefd60
--- /dev/null
+++ b/include/asm-arm/arch-omap/board.h
@@ -0,0 +1,126 @@
+/*
+ * linux/include/asm-arm/arch-omap/board.h
+ *
+ * Information structures for board-specific data
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK 0x4f01
+#define OMAP_TAG_MMC 0x4f02
+#define OMAP_TAG_UART 0x4f03
+#define OMAP_TAG_USB 0x4f04
+#define OMAP_TAG_LCD 0x4f05
+#define OMAP_TAG_GPIO_SWITCH 0x4f06
+
+#define OMAP_TAG_BOOT_REASON 0x4f80
+#define OMAP_TAG_FLASH_PART 0x4f81
+
+struct omap_clock_config {
+ /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+ u8 system_clock_type;
+};
+
+struct omap_mmc_config {
+ u8 mmc_blocks;
+ s16 mmc1_power_pin, mmc2_power_pin;
+ s16 mmc1_switch_pin, mmc2_switch_pin;
+};
+
+struct omap_uart_config {
+ u8 console_uart;
+ u32 console_speed;
+};
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+};
+
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+};
+
+/* Cover:
+ * high -> closed
+ * low -> open
+ * Connection:
+ * high -> connected
+ * low -> disconnected
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001
+struct omap_gpio_switch_config {
+ char name[12];
+ u16 gpio;
+ int flags:4;
+ int type:4;
+ int key_code:24; /* Linux key code */
+};
+
+struct omap_flash_part_config {
+ char part_table[0];
+};
+
+struct omap_boot_reason_config {
+ char reason_str[12];
+};
+
+
+struct omap_board_config_entry {
+ u16 tag;
+ u16 len;
+ u8 data[0];
+};
+
+struct omap_board_config_kernel {
+ u16 tag;
+ const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+ ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+ ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+#endif