Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
new file mode 100644
index 0000000..805714e
--- /dev/null
+++ b/drivers/net/irda/nsc-ircc.c
@@ -0,0 +1,2222 @@
+/*********************************************************************
+ *
+ * Filename: nsc-ircc.c
+ * Version: 1.0
+ * Description: Driver for the NSC PC'108 and PC'338 IrDA chipsets
+ * Status: Stable.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Nov 7 21:43:15 1998
+ * Modified at: Wed Mar 1 11:29:34 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
+ * Copyright (c) 1998 Actisys Corp., www.actisys.com
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * Notice that all functions that needs to access the chip in _any_
+ * way, must save BSR register on entry, and restore it on exit.
+ * It is _very_ important to follow this policy!
+ *
+ * __u8 bank;
+ *
+ * bank = inb(iobase+BSR);
+ *
+ * do_your_stuff_here();
+ *
+ * outb(bank, iobase+BSR);
+ *
+ * If you find bugs in this file, its very likely that the same bug
+ * will also be in w83977af_ir.c since the implementations are quite
+ * similar.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "nsc-ircc.h"
+
+#define CHIP_IO_EXTENT 8
+#define BROKEN_DONGLE_ID
+
+static char *driver_name = "nsc-ircc";
+
+/* Module parameters */
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+static int dongle_id;
+
+/* Use BIOS settions by default, but user may supply module parameters */
+static unsigned int io[] = { ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0, 0 };
+static unsigned int dma[] = { 0, 0, 0, 0, 0 };
+
+static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
+
+/* These are the known NSC chips */
+static nsc_chip_t chips[] = {
+/* Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */
+ { "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0,
+ nsc_ircc_probe_108, nsc_ircc_init_108 },
+ { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8,
+ nsc_ircc_probe_338, nsc_ircc_init_338 },
+ /* Contributed by Steffen Pingel - IBM X40 */
+ { "PC8738x", { 0x164e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
+ nsc_ircc_probe_39x, nsc_ircc_init_39x },
+ /* Contributed by Jan Frey - IBM A30/A31 */
+ { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff,
+ nsc_ircc_probe_39x, nsc_ircc_init_39x },
+ { NULL }
+};
+
+/* Max 4 instances for now */
+static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+
+static char *dongle_types[] = {
+ "Differential serial interface",
+ "Differential serial interface",
+ "Reserved",
+ "Reserved",
+ "Sharp RY5HD01",
+ "Reserved",
+ "Single-ended serial interface",
+ "Consumer-IR only",
+ "HP HSDL-2300, HP HSDL-3600/HSDL-3610",
+ "IBM31T1100 or Temic TFDS6000/TFDS6500",
+ "Reserved",
+ "Reserved",
+ "HP HSDL-1100/HSDL-2100",
+ "HP HSDL-1100/HSDL-2100",
+ "Supports SIR Mode only",
+ "No dongle connected",
+};
+
+/* Some prototypes */
+static int nsc_ircc_open(int i, chipio_t *info);
+static int nsc_ircc_close(struct nsc_ircc_cb *self);
+static int nsc_ircc_setup(chipio_t *info);
+static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
+static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self);
+static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
+static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
+static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
+static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
+static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
+static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
+static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self);
+static int nsc_ircc_read_dongle_id (int iobase);
+static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id);
+
+static int nsc_ircc_net_open(struct net_device *dev);
+static int nsc_ircc_net_close(struct net_device *dev);
+static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
+static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+/*
+ * Function nsc_ircc_init ()
+ *
+ * Initialize chip. Just try to find out how many chips we are dealing with
+ * and where they are
+ */
+static int __init nsc_ircc_init(void)
+{
+ chipio_t info;
+ nsc_chip_t *chip;
+ int ret = -ENODEV;
+ int cfg_base;
+ int cfg, id;
+ int reg;
+ int i = 0;
+
+ /* Probe for all the NSC chipsets we know about */
+ for (chip=chips; chip->name ; chip++) {
+ IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+ chip->name);
+
+ /* Try all config registers for this chip */
+ for (cfg=0; cfg<3; cfg++) {
+ cfg_base = chip->cfg[cfg];
+ if (!cfg_base)
+ continue;
+
+ memset(&info, 0, sizeof(chipio_t));
+ info.cfg_base = cfg_base;
+ info.fir_base = io[i];
+ info.dma = dma[i];
+ info.irq = irq[i];
+
+ /* Read index register */
+ reg = inb(cfg_base);
+ if (reg == 0xff) {
+ IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+ continue;
+ }
+
+ /* Read chip identification register */
+ outb(chip->cid_index, cfg_base);
+ id = inb(cfg_base+1);
+ if ((id & chip->cid_mask) == chip->cid_value) {
+ IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
+ __FUNCTION__, chip->name, id & ~chip->cid_mask);
+ /*
+ * If the user supplies the base address, then
+ * we init the chip, if not we probe the values
+ * set by the BIOS
+ */
+ if (io[i] < 0x2000) {
+ chip->init(chip, &info);
+ } else
+ chip->probe(chip, &info);
+
+ if (nsc_ircc_open(i, &info) == 0)
+ ret = 0;
+ i++;
+ } else {
+ IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+ }
+ }
+
+ }
+
+ return ret;
+}
+
+/*
+ * Function nsc_ircc_cleanup ()
+ *
+ * Close all configured chips
+ *
+ */
+static void __exit nsc_ircc_cleanup(void)
+{
+ int i;
+
+ pm_unregister_all(nsc_ircc_pmproc);
+
+ for (i=0; i < 4; i++) {
+ if (dev_self[i])
+ nsc_ircc_close(dev_self[i]);
+ }
+}
+
+/*
+ * Function nsc_ircc_open (iobase, irq)
+ *
+ * Open driver instance
+ *
+ */
+static int __init nsc_ircc_open(int i, chipio_t *info)
+{
+ struct net_device *dev;
+ struct nsc_ircc_cb *self;
+ struct pm_dev *pmdev;
+ void *ret;
+ int err;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
+ info->cfg_base);
+
+ if ((nsc_ircc_setup(info)) == -1)
+ return -1;
+
+ IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
+
+ dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
+ if (dev == NULL) {
+ IRDA_ERROR("%s(), can't allocate memory for "
+ "control block!\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ self = dev->priv;
+ self->netdev = dev;
+ spin_lock_init(&self->lock);
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+ self->index = i;
+
+ /* Initialize IO */
+ self->io.cfg_base = info->cfg_base;
+ self->io.fir_base = info->fir_base;
+ self->io.irq = info->irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = info->dma;
+ self->io.fifo_size = 32;
+
+ /* Reserve the ioports that we need */
+ ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
+ if (!ret) {
+ IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
+ __FUNCTION__, self->io.fir_base);
+ err = -ENODEV;
+ goto out1;
+ }
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* The only value we must override it the baudrate */
+ self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8);
+
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+ irda_qos_bits_to_value(&self->qos);
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ self->rx_buff.truesize = 14384;
+ self->tx_buff.truesize = 14384;
+
+ /* Allocate memory if needed */
+ self->rx_buff.head =
+ dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ &self->rx_buff_dma, GFP_KERNEL);
+ if (self->rx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto out2;
+
+ }
+ memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+
+ self->tx_buff.head =
+ dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ &self->tx_buff_dma, GFP_KERNEL);
+ if (self->tx_buff.head == NULL) {
+ err = -ENOMEM;
+ goto out3;
+ }
+ memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+ self->rx_buff.in_frame = FALSE;
+ self->rx_buff.state = OUTSIDE_FRAME;
+ self->tx_buff.data = self->tx_buff.head;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Tx queue info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Override the network functions we need to use */
+ SET_MODULE_OWNER(dev);
+ dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
+ dev->open = nsc_ircc_net_open;
+ dev->stop = nsc_ircc_net_close;
+ dev->do_ioctl = nsc_ircc_net_ioctl;
+ dev->get_stats = nsc_ircc_net_get_stats;
+
+ err = register_netdev(dev);
+ if (err) {
+ IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+ goto out4;
+ }
+ IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+ /* Check if user has supplied a valid dongle id or not */
+ if ((dongle_id <= 0) ||
+ (dongle_id >= (sizeof(dongle_types) / sizeof(dongle_types[0]))) ) {
+ dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
+
+ IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
+ dongle_types[dongle_id]);
+ } else {
+ IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
+ dongle_types[dongle_id]);
+ }
+
+ self->io.dongle_id = dongle_id;
+ nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
+
+ pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, nsc_ircc_pmproc);
+ if (pmdev)
+ pmdev->data = self;
+
+ return 0;
+ out4:
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+ out3:
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+ out2:
+ release_region(self->io.fir_base, self->io.fir_ext);
+ out1:
+ free_netdev(dev);
+ dev_self[i] = NULL;
+ return err;
+}
+
+/*
+ * Function nsc_ircc_close (self)
+ *
+ * Close driver instance
+ *
+ */
+static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
+{
+ int iobase;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ iobase = self->io.fir_base;
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Release the PORT that this driver is using */
+ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n",
+ __FUNCTION__, self->io.fir_base);
+ release_region(self->io.fir_base, self->io.fir_ext);
+
+ if (self->tx_buff.head)
+ dma_free_coherent(NULL, self->tx_buff.truesize,
+ self->tx_buff.head, self->tx_buff_dma);
+
+ if (self->rx_buff.head)
+ dma_free_coherent(NULL, self->rx_buff.truesize,
+ self->rx_buff.head, self->rx_buff_dma);
+
+ dev_self[self->index] = NULL;
+ free_netdev(self->netdev);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma)
+ *
+ * Initialize the NSC '108 chip
+ *
+ */
+static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ __u8 temp=0;
+
+ outb(2, cfg_base); /* Mode Control Register (MCTL) */
+ outb(0x00, cfg_base+1); /* Disable device */
+
+ /* Base Address and Interrupt Control Register (BAIC) */
+ outb(CFG_108_BAIC, cfg_base);
+ switch (info->fir_base) {
+ case 0x3e8: outb(0x14, cfg_base+1); break;
+ case 0x2e8: outb(0x15, cfg_base+1); break;
+ case 0x3f8: outb(0x16, cfg_base+1); break;
+ case 0x2f8: outb(0x17, cfg_base+1); break;
+ default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+ }
+
+ /* Control Signal Routing Register (CSRT) */
+ switch (info->irq) {
+ case 3: temp = 0x01; break;
+ case 4: temp = 0x02; break;
+ case 5: temp = 0x03; break;
+ case 7: temp = 0x04; break;
+ case 9: temp = 0x05; break;
+ case 11: temp = 0x06; break;
+ case 15: temp = 0x07; break;
+ default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+ }
+ outb(CFG_108_CSRT, cfg_base);
+
+ switch (info->dma) {
+ case 0: outb(0x08+temp, cfg_base+1); break;
+ case 1: outb(0x10+temp, cfg_base+1); break;
+ case 3: outb(0x18+temp, cfg_base+1); break;
+ default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+ }
+
+ outb(CFG_108_MCTL, cfg_base); /* Mode Control Register (MCTL) */
+ outb(0x03, cfg_base+1); /* Enable device */
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_108 (chip, info)
+ *
+ *
+ *
+ */
+static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int reg;
+
+ /* Read address and interrupt control register (BAIC) */
+ outb(CFG_108_BAIC, cfg_base);
+ reg = inb(cfg_base+1);
+
+ switch (reg & 0x03) {
+ case 0:
+ info->fir_base = 0x3e8;
+ break;
+ case 1:
+ info->fir_base = 0x2e8;
+ break;
+ case 2:
+ info->fir_base = 0x3f8;
+ break;
+ case 3:
+ info->fir_base = 0x2f8;
+ break;
+ }
+ info->sir_base = info->fir_base;
+ IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+ info->fir_base);
+
+ /* Read control signals routing register (CSRT) */
+ outb(CFG_108_CSRT, cfg_base);
+ reg = inb(cfg_base+1);
+
+ switch (reg & 0x07) {
+ case 0:
+ info->irq = -1;
+ break;
+ case 1:
+ info->irq = 3;
+ break;
+ case 2:
+ info->irq = 4;
+ break;
+ case 3:
+ info->irq = 5;
+ break;
+ case 4:
+ info->irq = 7;
+ break;
+ case 5:
+ info->irq = 9;
+ break;
+ case 6:
+ info->irq = 11;
+ break;
+ case 7:
+ info->irq = 15;
+ break;
+ }
+ IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+
+ /* Currently we only read Rx DMA but it will also be used for Tx */
+ switch ((reg >> 3) & 0x03) {
+ case 0:
+ info->dma = -1;
+ break;
+ case 1:
+ info->dma = 0;
+ break;
+ case 2:
+ info->dma = 1;
+ break;
+ case 3:
+ info->dma = 3;
+ break;
+ }
+ IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+
+ /* Read mode control register (MCTL) */
+ outb(CFG_108_MCTL, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->enabled = reg & 0x01;
+ info->suspended = !((reg >> 1) & 0x01);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_init_338 (chip, info)
+ *
+ * Initialize the NSC '338 chip. Remember that the 87338 needs two
+ * consecutive writes to the data registers while CPU interrupts are
+ * disabled. The 97338 does not require this, but shouldn't be any
+ * harm if we do it anyway.
+ */
+static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info)
+{
+ /* No init yet */
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_338 (chip, info)
+ *
+ *
+ *
+ */
+static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int reg, com = 0;
+ int pnp;
+
+ /* Read funtion enable register (FER) */
+ outb(CFG_338_FER, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->enabled = (reg >> 2) & 0x01;
+
+ /* Check if we are in Legacy or PnP mode */
+ outb(CFG_338_PNP0, cfg_base);
+ reg = inb(cfg_base+1);
+
+ pnp = (reg >> 3) & 0x01;
+ if (pnp) {
+ IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
+ outb(0x46, cfg_base);
+ reg = (inb(cfg_base+1) & 0xfe) << 2;
+
+ outb(0x47, cfg_base);
+ reg |= ((inb(cfg_base+1) & 0xfc) << 8);
+
+ info->fir_base = reg;
+ } else {
+ /* Read function address register (FAR) */
+ outb(CFG_338_FAR, cfg_base);
+ reg = inb(cfg_base+1);
+
+ switch ((reg >> 4) & 0x03) {
+ case 0:
+ info->fir_base = 0x3f8;
+ break;
+ case 1:
+ info->fir_base = 0x2f8;
+ break;
+ case 2:
+ com = 3;
+ break;
+ case 3:
+ com = 4;
+ break;
+ }
+
+ if (com) {
+ switch ((reg >> 6) & 0x03) {
+ case 0:
+ if (com == 3)
+ info->fir_base = 0x3e8;
+ else
+ info->fir_base = 0x2e8;
+ break;
+ case 1:
+ if (com == 3)
+ info->fir_base = 0x338;
+ else
+ info->fir_base = 0x238;
+ break;
+ case 2:
+ if (com == 3)
+ info->fir_base = 0x2e8;
+ else
+ info->fir_base = 0x2e0;
+ break;
+ case 3:
+ if (com == 3)
+ info->fir_base = 0x220;
+ else
+ info->fir_base = 0x228;
+ break;
+ }
+ }
+ }
+ info->sir_base = info->fir_base;
+
+ /* Read PnP register 1 (PNP1) */
+ outb(CFG_338_PNP1, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->irq = reg >> 4;
+
+ /* Read PnP register 3 (PNP3) */
+ outb(CFG_338_PNP3, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->dma = (reg & 0x07) - 1;
+
+ /* Read power and test register (PTR) */
+ outb(CFG_338_PTR, cfg_base);
+ reg = inb(cfg_base+1);
+
+ info->suspended = reg & 0x01;
+
+ return 0;
+}
+
+
+/*
+ * Function nsc_ircc_init_39x (chip, info)
+ *
+ * Now that we know it's a '39x (see probe below), we need to
+ * configure it so we can use it.
+ *
+ * The NSC '338 chip is a Super I/O chip with a "bank" architecture,
+ * the configuration of the different functionality (serial, parallel,
+ * floppy...) are each in a different bank (Logical Device Number).
+ * The base address, irq and dma configuration registers are common
+ * to all functionalities (index 0x30 to 0x7F).
+ * There is only one configuration register specific to the
+ * serial port, CFG_39X_SPC.
+ * JeanII
+ *
+ * Note : this code was written by Jan Frey <janfrey@web.de>
+ */
+static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int enabled;
+
+ /* User is shure about his config... accept it. */
+ IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
+ "io=0x%04x, irq=%d, dma=%d\n",
+ __FUNCTION__, info->fir_base, info->irq, info->dma);
+
+ /* Access bank for SP2 */
+ outb(CFG_39X_LDN, cfg_base);
+ outb(0x02, cfg_base+1);
+
+ /* Configure SP2 */
+
+ /* We want to enable the device if not enabled */
+ outb(CFG_39X_ACT, cfg_base);
+ enabled = inb(cfg_base+1) & 0x01;
+
+ if (!enabled) {
+ /* Enable the device */
+ outb(CFG_39X_SIOCF1, cfg_base);
+ outb(0x01, cfg_base+1);
+ /* May want to update info->enabled. Jean II */
+ }
+
+ /* Enable UART bank switching (bit 7) ; Sets the chip to normal
+ * power mode (wake up from sleep mode) (bit 1) */
+ outb(CFG_39X_SPC, cfg_base);
+ outb(0x82, cfg_base+1);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_39x (chip, info)
+ *
+ * Test if we really have a '39x chip at the given address
+ *
+ * Note : this code was written by Jan Frey <janfrey@web.de>
+ */
+static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
+{
+ int cfg_base = info->cfg_base;
+ int reg1, reg2, irq, irqt, dma1, dma2;
+ int enabled, susp;
+
+ IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
+ __FUNCTION__, cfg_base);
+
+ /* This function should be executed with irq off to avoid
+ * another driver messing with the Super I/O bank - Jean II */
+
+ /* Access bank for SP2 */
+ outb(CFG_39X_LDN, cfg_base);
+ outb(0x02, cfg_base+1);
+
+ /* Read infos about SP2 ; store in info struct */
+ outb(CFG_39X_BASEH, cfg_base);
+ reg1 = inb(cfg_base+1);
+ outb(CFG_39X_BASEL, cfg_base);
+ reg2 = inb(cfg_base+1);
+ info->fir_base = (reg1 << 8) | reg2;
+
+ outb(CFG_39X_IRQNUM, cfg_base);
+ irq = inb(cfg_base+1);
+ outb(CFG_39X_IRQSEL, cfg_base);
+ irqt = inb(cfg_base+1);
+ info->irq = irq;
+
+ outb(CFG_39X_DMA0, cfg_base);
+ dma1 = inb(cfg_base+1);
+ outb(CFG_39X_DMA1, cfg_base);
+ dma2 = inb(cfg_base+1);
+ info->dma = dma1 -1;
+
+ outb(CFG_39X_ACT, cfg_base);
+ info->enabled = enabled = inb(cfg_base+1) & 0x01;
+
+ outb(CFG_39X_SPC, cfg_base);
+ susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
+
+ IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+
+ /* Configure SP2 */
+
+ /* We want to enable the device if not enabled */
+ outb(CFG_39X_ACT, cfg_base);
+ enabled = inb(cfg_base+1) & 0x01;
+
+ if (!enabled) {
+ /* Enable the device */
+ outb(CFG_39X_SIOCF1, cfg_base);
+ outb(0x01, cfg_base+1);
+ /* May want to update info->enabled. Jean II */
+ }
+
+ /* Enable UART bank switching (bit 7) ; Sets the chip to normal
+ * power mode (wake up from sleep mode) (bit 1) */
+ outb(CFG_39X_SPC, cfg_base);
+ outb(0x82, cfg_base+1);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_setup (info)
+ *
+ * Returns non-negative on success.
+ *
+ */
+static int nsc_ircc_setup(chipio_t *info)
+{
+ int version;
+ int iobase = info->fir_base;
+
+ /* Read the Module ID */
+ switch_bank(iobase, BANK3);
+ version = inb(iobase+MID);
+
+ IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
+ __FUNCTION__, driver_name, version);
+
+ /* Should be 0x2? */
+ if (0x20 != (version & 0xf0)) {
+ IRDA_ERROR("%s, Wrong chip version %02x\n",
+ driver_name, version);
+ return -1;
+ }
+
+ /* Switch to advanced mode */
+ switch_bank(iobase, BANK2);
+ outb(ECR1_EXT_SL, iobase+ECR1);
+ switch_bank(iobase, BANK0);
+
+ /* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
+ switch_bank(iobase, BANK0);
+ outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
+
+ outb(0x03, iobase+LCR); /* 8 bit word length */
+ outb(MCR_SIR, iobase+MCR); /* Start at SIR-mode, also clears LSR*/
+
+ /* Set FIFO size to 32 */
+ switch_bank(iobase, BANK2);
+ outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
+
+ /* IRCR2: FEND_MD is not set */
+ switch_bank(iobase, BANK5);
+ outb(0x02, iobase+4);
+
+ /* Make sure that some defaults are OK */
+ switch_bank(iobase, BANK6);
+ outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
+ outb(0x0a, iobase+1); /* Set MIR pulse width */
+ outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
+ outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
+
+ /* Enable receive interrupts */
+ switch_bank(iobase, BANK0);
+ outb(IER_RXHDL_IE, iobase+IER);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_read_dongle_id (void)
+ *
+ * Try to read dongle indentification. This procedure needs to be executed
+ * once after power-on/reset. It also needs to be used whenever you suspect
+ * that the user may have plugged/unplugged the IrDA Dongle.
+ */
+static int nsc_ircc_read_dongle_id (int iobase)
+{
+ int dongle_id;
+ __u8 bank;
+
+ bank = inb(iobase+BSR);
+
+ /* Select Bank 7 */
+ switch_bank(iobase, BANK7);
+
+ /* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */
+ outb(0x00, iobase+7);
+
+ /* ID0, 1, and 2 are pulled up/down very slowly */
+ udelay(50);
+
+ /* IRCFG1: read the ID bits */
+ dongle_id = inb(iobase+4) & 0x0f;
+
+#ifdef BROKEN_DONGLE_ID
+ if (dongle_id == 0x0a)
+ dongle_id = 0x09;
+#endif
+ /* Go back to bank 0 before returning */
+ switch_bank(iobase, BANK0);
+
+ outb(bank, iobase+BSR);
+
+ return dongle_id;
+}
+
+/*
+ * Function nsc_ircc_init_dongle_interface (iobase, dongle_id)
+ *
+ * This function initializes the dongle for the transceiver that is
+ * used. This procedure needs to be executed once after
+ * power-on/reset. It also needs to be used whenever you suspect that
+ * the dongle is changed.
+ */
+static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
+{
+ int bank;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Select Bank 7 */
+ switch_bank(iobase, BANK7);
+
+ /* IRCFG4: set according to dongle_id */
+ switch (dongle_id) {
+ case 0x00: /* same as */
+ case 0x01: /* Differential serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x02: /* same as */
+ case 0x03: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x04: /* Sharp RY5HD01 */
+ break;
+ case 0x05: /* Reserved, but this is what the Thinkpad reports */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x06: /* Single-ended serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x07: /* Consumer-IR only */
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+ outb(0x28, iobase+7); /* Set irsl[0-2] as output */
+ break;
+ case 0x0A: /* same as */
+ case 0x0B: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x0C: /* same as */
+ case 0x0D: /* HP HSDL-1100/HSDL-2100 */
+ /*
+ * Set irsl0 as input, irsl[1-2] as output, and separate
+ * inputs are used for SIR and MIR/FIR
+ */
+ outb(0x48, iobase+7);
+ break;
+ case 0x0E: /* Supports SIR Mode only */
+ outb(0x28, iobase+7); /* Set irsl[0-2] as output */
+ break;
+ case 0x0F: /* No dongle connected */
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+
+ switch_bank(iobase, BANK0);
+ outb(0x62, iobase+MCR);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), invalid dongle_id %#x",
+ __FUNCTION__, dongle_id);
+ }
+
+ /* IRCFG1: IRSL1 and 2 are set to IrDA mode */
+ outb(0x00, iobase+4);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+} /* set_up_dongle_interface */
+
+/*
+ * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id)
+ *
+ * Change speed of the attach dongle
+ *
+ */
+static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
+{
+ __u8 bank;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Select Bank 7 */
+ switch_bank(iobase, BANK7);
+
+ /* IRCFG1: set according to dongle_id */
+ switch (dongle_id) {
+ case 0x00: /* same as */
+ case 0x01: /* Differential serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x02: /* same as */
+ case 0x03: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x04: /* Sharp RY5HD01 */
+ break;
+ case 0x05: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x06: /* Single-ended serial interface */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x07: /* Consumer-IR only */
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+ IRDA_DEBUG(0, "%s(), %s\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ outb(0x00, iobase+4);
+ if (speed > 115200)
+ outb(0x01, iobase+4);
+ break;
+ case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+ outb(0x01, iobase+4);
+
+ if (speed == 4000000) {
+ /* There was a cli() there, but we now are already
+ * under spin_lock_irqsave() - JeanII */
+ outb(0x81, iobase+4);
+ outb(0x80, iobase+4);
+ } else
+ outb(0x00, iobase+4);
+ break;
+ case 0x0A: /* same as */
+ case 0x0B: /* Reserved */
+ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+ break;
+ case 0x0C: /* same as */
+ case 0x0D: /* HP HSDL-1100/HSDL-2100 */
+ break;
+ case 0x0E: /* Supports SIR Mode only */
+ break;
+ case 0x0F: /* No dongle connected */
+ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+ __FUNCTION__, dongle_types[dongle_id]);
+
+ switch_bank(iobase, BANK0);
+ outb(0x62, iobase+MCR);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+ }
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_change_speed (self, baud)
+ *
+ * Change the speed of the device
+ *
+ * This function *must* be called with irq off and spin-lock.
+ */
+static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
+{
+ struct net_device *dev = self->netdev;
+ __u8 mcr = MCR_SIR;
+ int iobase;
+ __u8 bank;
+ __u8 ier; /* Interrupt enable register */
+
+ IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ /* Update accounting for new speed */
+ self->io.speed = speed;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, BANK0);
+ outb(0, iobase+IER);
+
+ /* Select Bank 2 */
+ switch_bank(iobase, BANK2);
+
+ outb(0x00, iobase+BGDH);
+ switch (speed) {
+ case 9600: outb(0x0c, iobase+BGDL); break;
+ case 19200: outb(0x06, iobase+BGDL); break;
+ case 38400: outb(0x03, iobase+BGDL); break;
+ case 57600: outb(0x02, iobase+BGDL); break;
+ case 115200: outb(0x01, iobase+BGDL); break;
+ case 576000:
+ switch_bank(iobase, BANK5);
+
+ /* IRCR2: MDRS is set */
+ outb(inb(iobase+4) | 0x04, iobase+4);
+
+ mcr = MCR_MIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+ break;
+ case 1152000:
+ mcr = MCR_MIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+ break;
+ case 4000000:
+ mcr = MCR_FIR;
+ IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+ break;
+ default:
+ mcr = MCR_FIR;
+ IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n",
+ __FUNCTION__, speed);
+ break;
+ }
+
+ /* Set appropriate speed mode */
+ switch_bank(iobase, BANK0);
+ outb(mcr | MCR_TX_DFR, iobase+MCR);
+
+ /* Give some hits to the transceiver */
+ nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
+
+ /* Set FIFO threshold to TX17, RX16 */
+ switch_bank(iobase, BANK0);
+ outb(0x00, iobase+FCR);
+ outb(FCR_FIFO_EN, iobase+FCR);
+ outb(FCR_RXTH| /* Set Rx FIFO threshold */
+ FCR_TXTH| /* Set Tx FIFO threshold */
+ FCR_TXSR| /* Reset Tx FIFO */
+ FCR_RXSR| /* Reset Rx FIFO */
+ FCR_FIFO_EN, /* Enable FIFOs */
+ iobase+FCR);
+
+ /* Set FIFO size to 32 */
+ switch_bank(iobase, BANK2);
+ outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
+
+ /* Enable some interrupts so we can receive frames */
+ switch_bank(iobase, BANK0);
+ if (speed > 115200) {
+ /* Install FIR xmit handler */
+ dev->hard_start_xmit = nsc_ircc_hard_xmit_fir;
+ ier = IER_SFIF_IE;
+ nsc_ircc_dma_receive(self);
+ } else {
+ /* Install SIR xmit handler */
+ dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
+ ier = IER_RXHDL_IE;
+ }
+ /* Set our current interrupt mask */
+ outb(ier, iobase+IER);
+
+ /* Restore BSR */
+ outb(bank, iobase+BSR);
+
+ /* Make sure interrupt handlers keep the proper interrupt mask */
+ return(ier);
+}
+
+/*
+ * Function nsc_ircc_hard_xmit (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __s32 speed;
+ __u8 bank;
+
+ self = (struct nsc_ircc_cb *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests *& speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame. */
+ if (!skb->len) {
+ /* If we just sent a frame, we get called before
+ * the last bytes get out (because of the SIR FIFO).
+ * If this is the case, let interrupt handler change
+ * the speed itself... Jean II */
+ if (self->io.direction == IO_RECV) {
+ nsc_ircc_change_speed(self, speed);
+ /* TODO : For SIR->SIR, the next packet
+ * may get corrupted - Jean II */
+ netif_wake_queue(dev);
+ } else {
+ self->new_speed = speed;
+ /* Queue will be restarted after speed change
+ * to make sure packets gets through the
+ * proper xmit handler - Jean II */
+ }
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else
+ self->new_speed = speed;
+ }
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ self->tx_buff.data = self->tx_buff.head;
+
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.truesize);
+
+ self->stats.tx_bytes += self->tx_buff.len;
+
+ /* Add interrupt on tx low level (will fire immediately) */
+ switch_bank(iobase, BANK0);
+ outb(IER_TXLDL_IE, iobase+IER);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ unsigned long flags;
+ int iobase;
+ __s32 speed;
+ __u8 bank;
+ int mtt, diff;
+
+ self = (struct nsc_ircc_cb *) dev->priv;
+ iobase = self->io.fir_base;
+
+ netif_stop_queue(dev);
+
+ /* Make sure tests *& speed change are atomic */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1)) {
+ /* Check for empty frame. */
+ if (!skb->len) {
+ /* If we are currently transmitting, defer to
+ * interrupt handler. - Jean II */
+ if(self->tx_fifo.len == 0) {
+ nsc_ircc_change_speed(self, speed);
+ netif_wake_queue(dev);
+ } else {
+ self->new_speed = speed;
+ /* Keep queue stopped :
+ * the speed change operation may change the
+ * xmit handler, and we want to make sure
+ * the next packet get through the proper
+ * Tx path, so block the Tx queue until
+ * the speed change has been done.
+ * Jean II */
+ }
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+ return 0;
+ } else {
+ /* Change speed after current frame */
+ self->new_speed = speed;
+ }
+ }
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Register and copy this frame to DMA memory */
+ self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
+ self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
+ self->tx_fifo.tail += skb->len;
+
+ self->stats.tx_bytes += skb->len;
+
+ memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
+ skb->len);
+
+ self->tx_fifo.len++;
+ self->tx_fifo.free++;
+
+ /* Start transmit only if there is currently no transmit going on */
+ if (self->tx_fifo.len == 1) {
+ /* Check if we must wait the min turn time or not */
+ mtt = irda_get_mtt(skb);
+ if (mtt) {
+ /* Check how much time we have used already */
+ do_gettimeofday(&self->now);
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff) {
+ mtt -= diff;
+
+ /*
+ * Use timer if delay larger than 125 us, and
+ * use udelay for smaller values which should
+ * be acceptable
+ */
+ if (mtt > 125) {
+ /* Adjust for timer resolution */
+ mtt = mtt / 125;
+
+ /* Setup timer */
+ switch_bank(iobase, BANK4);
+ outb(mtt & 0xff, iobase+TMRL);
+ outb((mtt >> 8) & 0x0f, iobase+TMRH);
+
+ /* Start timer */
+ outb(IRCR1_TMR_EN, iobase+IRCR1);
+ self->io.direction = IO_XMIT;
+
+ /* Enable timer interrupt */
+ switch_bank(iobase, BANK0);
+ outb(IER_TMR_IE, iobase+IER);
+
+ /* Timer will take care of the rest */
+ goto out;
+ } else
+ udelay(mtt);
+ }
+ }
+ /* Enable DMA interrupt */
+ switch_bank(iobase, BANK0);
+ outb(IER_DMA_IE, iobase+IER);
+
+ /* Transmit frame */
+ nsc_ircc_dma_xmit(self, iobase);
+ }
+ out:
+ /* Not busy transmitting anymore if window is not full,
+ * and if we don't need to change speed */
+ if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0))
+ netif_wake_queue(self->netdev);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&self->lock, flags);
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_dma_xmit (self, iobase)
+ *
+ * Transmit data using DMA
+ *
+ */
+static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase)
+{
+ int bsr;
+
+ /* Save current bank */
+ bsr = inb(iobase+BSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+ self->io.direction = IO_XMIT;
+
+ /* Choose transmit DMA channel */
+ switch_bank(iobase, BANK2);
+ outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
+
+ irda_setup_dma(self->io.dma,
+ ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
+ self->tx_buff.head) + self->tx_buff_dma,
+ self->tx_fifo.queue[self->tx_fifo.ptr].len,
+ DMA_TX_MODE);
+
+ /* Enable DMA and SIR interaction pulse */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR);
+
+ /* Restore bank register */
+ outb(bsr, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_pio_xmit (self, iobase)
+ *
+ * Transmit data using PIO. Returns the number of bytes that actually
+ * got transferred
+ *
+ */
+static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
+{
+ int actual = 0;
+ __u8 bank;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ switch_bank(iobase, BANK0);
+ if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
+ IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
+ __FUNCTION__);
+
+ /* FIFO may still be filled to the Tx interrupt threshold */
+ fifo_size -= 17;
+ }
+
+ /* Fill FIFO with current frame */
+ while ((fifo_size-- > 0) && (actual < len)) {
+ /* Transmit next byte */
+ outb(buf[actual++], iobase+TXD);
+ }
+
+ IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n",
+ __FUNCTION__, fifo_size, actual, len);
+
+ /* Restore bank */
+ outb(bank, iobase+BSR);
+
+ return actual;
+}
+
+/*
+ * Function nsc_ircc_dma_xmit_complete (self)
+ *
+ * The transfer of a frame in finished. This function will only be called
+ * by the interrupt handler
+ *
+ */
+static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
+{
+ int iobase;
+ __u8 bank;
+ int ret = TRUE;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ iobase = self->io.fir_base;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+ /* Check for underrrun! */
+ if (inb(iobase+ASCR) & ASCR_TXUR) {
+ self->stats.tx_errors++;
+ self->stats.tx_fifo_errors++;
+
+ /* Clear bit, by writing 1 into it */
+ outb(ASCR_TXUR, iobase+ASCR);
+ } else {
+ self->stats.tx_packets++;
+ }
+
+ /* Finished with this frame, so prepare for next */
+ self->tx_fifo.ptr++;
+ self->tx_fifo.len--;
+
+ /* Any frames to be sent back-to-back? */
+ if (self->tx_fifo.len) {
+ nsc_ircc_dma_xmit(self, iobase);
+
+ /* Not finished yet! */
+ ret = FALSE;
+ } else {
+ /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+ }
+
+ /* Make sure we have room for more frames and
+ * that we don't need to change speed */
+ if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) {
+ /* Not busy transmitting anymore */
+ /* Tell the network layer, that we can accept more frames */
+ netif_wake_queue(self->netdev);
+ }
+
+ /* Restore bank */
+ outb(bank, iobase+BSR);
+
+ return ret;
+}
+
+/*
+ * Function nsc_ircc_dma_receive (self)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self)
+{
+ int iobase;
+ __u8 bsr;
+
+ iobase = self->io.fir_base;
+
+ /* Reset Tx FIFO info */
+ self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+ self->tx_fifo.tail = self->tx_buff.head;
+
+ /* Save current bank */
+ bsr = inb(iobase+BSR);
+
+ /* Disable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+ /* Choose DMA Rx, DMA Fairness, and Advanced mode */
+ switch_bank(iobase, BANK2);
+ outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
+
+ self->io.direction = IO_RECV;
+ self->rx_buff.data = self->rx_buff.head;
+
+ /* Reset Rx FIFO. This will also flush the ST_FIFO */
+ switch_bank(iobase, BANK0);
+ outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
+
+ self->st_fifo.len = self->st_fifo.pending_bytes = 0;
+ self->st_fifo.tail = self->st_fifo.head = 0;
+
+ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
+ DMA_RX_MODE);
+
+ /* Enable DMA */
+ switch_bank(iobase, BANK0);
+ outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR);
+
+ /* Restore bank register */
+ outb(bsr, iobase+BSR);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_dma_receive_complete (self)
+ *
+ * Finished with receiving frames
+ *
+ *
+ */
+static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
+{
+ struct st_fifo *st_fifo;
+ struct sk_buff *skb;
+ __u8 status;
+ __u8 bank;
+ int len;
+
+ st_fifo = &self->st_fifo;
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Read all entries in status FIFO */
+ switch_bank(iobase, BANK5);
+ while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) {
+ /* We must empty the status FIFO no matter what */
+ len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
+
+ if (st_fifo->tail >= MAX_RX_WINDOW) {
+ IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+ continue;
+ }
+
+ st_fifo->entries[st_fifo->tail].status = status;
+ st_fifo->entries[st_fifo->tail].len = len;
+ st_fifo->pending_bytes += len;
+ st_fifo->tail++;
+ st_fifo->len++;
+ }
+ /* Try to process all entries in status FIFO */
+ while (st_fifo->len > 0) {
+ /* Get first entry */
+ status = st_fifo->entries[st_fifo->head].status;
+ len = st_fifo->entries[st_fifo->head].len;
+ st_fifo->pending_bytes -= len;
+ st_fifo->head++;
+ st_fifo->len--;
+
+ /* Check for errors */
+ if (status & FRM_ST_ERR_MSK) {
+ if (status & FRM_ST_LOST_FR) {
+ /* Add number of lost frames to stats */
+ self->stats.rx_errors += len;
+ } else {
+ /* Skip frame */
+ self->stats.rx_errors++;
+
+ self->rx_buff.data += len;
+
+ if (status & FRM_ST_MAX_LEN)
+ self->stats.rx_length_errors++;
+
+ if (status & FRM_ST_PHY_ERR)
+ self->stats.rx_frame_errors++;
+
+ if (status & FRM_ST_BAD_CRC)
+ self->stats.rx_crc_errors++;
+ }
+ /* The errors below can be reported in both cases */
+ if (status & FRM_ST_OVR1)
+ self->stats.rx_fifo_errors++;
+
+ if (status & FRM_ST_OVR2)
+ self->stats.rx_fifo_errors++;
+ } else {
+ /*
+ * First we must make sure that the frame we
+ * want to deliver is all in main memory. If we
+ * cannot tell, then we check if the Rx FIFO is
+ * empty. If not then we will have to take a nap
+ * and try again later.
+ */
+ if (st_fifo->pending_bytes < self->io.fifo_size) {
+ switch_bank(iobase, BANK0);
+ if (inb(iobase+LSR) & LSR_RXDA) {
+ /* Put this entry back in fifo */
+ st_fifo->head--;
+ st_fifo->len++;
+ st_fifo->pending_bytes += len;
+ st_fifo->entries[st_fifo->head].status = status;
+ st_fifo->entries[st_fifo->head].len = len;
+ /*
+ * DMA not finished yet, so try again
+ * later, set timer value, resolution
+ * 125 us
+ */
+ switch_bank(iobase, BANK4);
+ outb(0x02, iobase+TMRL); /* x 125 us */
+ outb(0x00, iobase+TMRH);
+
+ /* Start timer */
+ outb(IRCR1_TMR_EN, iobase+IRCR1);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return FALSE; /* I'll be back! */
+ }
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ do_gettimeofday(&self->stamp);
+
+ skb = dev_alloc_skb(len+1);
+ if (skb == NULL) {
+ IRDA_WARNING("%s(), memory squeeze, "
+ "dropping frame.\n",
+ __FUNCTION__);
+ self->stats.rx_dropped++;
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return FALSE;
+ }
+
+ /* Make sure IP header gets aligned */
+ skb_reserve(skb, 1);
+
+ /* Copy frame without CRC */
+ if (self->io.speed < 4000000) {
+ skb_put(skb, len-2);
+ memcpy(skb->data, self->rx_buff.data, len-2);
+ } else {
+ skb_put(skb, len-4);
+ memcpy(skb->data, self->rx_buff.data, len-4);
+ }
+
+ /* Move to next frame */
+ self->rx_buff.data += len;
+ self->stats.rx_bytes += len;
+ self->stats.rx_packets++;
+
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+ self->netdev->last_rx = jiffies;
+ }
+ }
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return TRUE;
+}
+
+/*
+ * Function nsc_ircc_pio_receive (self)
+ *
+ * Receive all data in receiver FIFO
+ *
+ */
+static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self)
+{
+ __u8 byte;
+ int iobase;
+
+ iobase = self->io.fir_base;
+
+ /* Receive all characters in Rx FIFO */
+ do {
+ byte = inb(iobase+RXD);
+ async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
+ byte);
+ } while (inb(iobase+LSR) & LSR_RXDA); /* Data available */
+}
+
+/*
+ * Function nsc_ircc_sir_interrupt (self, eir)
+ *
+ * Handle SIR interrupt
+ *
+ */
+static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
+{
+ int actual;
+
+ /* Check if transmit FIFO is low on data */
+ if (eir & EIR_TXLDL_EV) {
+ /* Write data left in transmit buffer */
+ actual = nsc_ircc_pio_write(self->io.fir_base,
+ self->tx_buff.data,
+ self->tx_buff.len,
+ self->io.fifo_size);
+ self->tx_buff.data += actual;
+ self->tx_buff.len -= actual;
+
+ self->io.direction = IO_XMIT;
+
+ /* Check if finished */
+ if (self->tx_buff.len > 0)
+ self->ier = IER_TXLDL_IE;
+ else {
+
+ self->stats.tx_packets++;
+ netif_wake_queue(self->netdev);
+ self->ier = IER_TXEMP_IE;
+ }
+
+ }
+ /* Check if transmission has completed */
+ if (eir & EIR_TXEMP_EV) {
+ /* Turn around and get ready to receive some data */
+ self->io.direction = IO_RECV;
+ self->ier = IER_RXHDL_IE;
+ /* Check if we need to change the speed?
+ * Need to be after self->io.direction to avoid race with
+ * nsc_ircc_hard_xmit_sir() - Jean II */
+ if (self->new_speed) {
+ IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+ self->ier = nsc_ircc_change_speed(self,
+ self->new_speed);
+ self->new_speed = 0;
+ netif_wake_queue(self->netdev);
+
+ /* Check if we are going to FIR */
+ if (self->io.speed > 115200) {
+ /* No need to do anymore SIR stuff */
+ return;
+ }
+ }
+ }
+
+ /* Rx FIFO threshold or timeout */
+ if (eir & EIR_RXHDL_EV) {
+ nsc_ircc_pio_receive(self);
+
+ /* Keep receiving */
+ self->ier = IER_RXHDL_IE;
+ }
+}
+
+/*
+ * Function nsc_ircc_fir_interrupt (self, eir)
+ *
+ * Handle MIR/FIR interrupt
+ *
+ */
+static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
+ int eir)
+{
+ __u8 bank;
+
+ bank = inb(iobase+BSR);
+
+ /* Status FIFO event*/
+ if (eir & EIR_SFIF_EV) {
+ /* Check if DMA has finished */
+ if (nsc_ircc_dma_receive_complete(self, iobase)) {
+ /* Wait for next status FIFO interrupt */
+ self->ier = IER_SFIF_IE;
+ } else {
+ self->ier = IER_SFIF_IE | IER_TMR_IE;
+ }
+ } else if (eir & EIR_TMR_EV) { /* Timer finished */
+ /* Disable timer */
+ switch_bank(iobase, BANK4);
+ outb(0, iobase+IRCR1);
+
+ /* Clear timer event */
+ switch_bank(iobase, BANK0);
+ outb(ASCR_CTE, iobase+ASCR);
+
+ /* Check if this is a Tx timer interrupt */
+ if (self->io.direction == IO_XMIT) {
+ nsc_ircc_dma_xmit(self, iobase);
+
+ /* Interrupt on DMA */
+ self->ier = IER_DMA_IE;
+ } else {
+ /* Check (again) if DMA has finished */
+ if (nsc_ircc_dma_receive_complete(self, iobase)) {
+ self->ier = IER_SFIF_IE;
+ } else {
+ self->ier = IER_SFIF_IE | IER_TMR_IE;
+ }
+ }
+ } else if (eir & EIR_DMA_EV) {
+ /* Finished with all transmissions? */
+ if (nsc_ircc_dma_xmit_complete(self)) {
+ if(self->new_speed != 0) {
+ /* As we stop the Tx queue, the speed change
+ * need to be done when the Tx fifo is
+ * empty. Ask for a Tx done interrupt */
+ self->ier = IER_TXEMP_IE;
+ } else {
+ /* Check if there are more frames to be
+ * transmitted */
+ if (irda_device_txqueue_empty(self->netdev)) {
+ /* Prepare for receive */
+ nsc_ircc_dma_receive(self);
+ self->ier = IER_SFIF_IE;
+ } else
+ IRDA_WARNING("%s(), potential "
+ "Tx queue lockup !\n",
+ __FUNCTION__);
+ }
+ } else {
+ /* Not finished yet, so interrupt on DMA again */
+ self->ier = IER_DMA_IE;
+ }
+ } else if (eir & EIR_TXEMP_EV) {
+ /* The Tx FIFO has totally drained out, so now we can change
+ * the speed... - Jean II */
+ self->ier = nsc_ircc_change_speed(self, self->new_speed);
+ self->new_speed = 0;
+ netif_wake_queue(self->netdev);
+ /* Note : nsc_ircc_change_speed() restarted Rx fifo */
+ }
+
+ outb(bank, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct nsc_ircc_cb *self;
+ __u8 bsr, eir;
+ int iobase;
+
+ if (!dev) {
+ IRDA_WARNING("%s: irq %d for unknown device.\n",
+ driver_name, irq);
+ return IRQ_NONE;
+ }
+ self = (struct nsc_ircc_cb *) dev->priv;
+
+ spin_lock(&self->lock);
+
+ iobase = self->io.fir_base;
+
+ bsr = inb(iobase+BSR); /* Save current bank */
+
+ switch_bank(iobase, BANK0);
+ self->ier = inb(iobase+IER);
+ eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */
+
+ outb(0, iobase+IER); /* Disable interrupts */
+
+ if (eir) {
+ /* Dispatch interrupt handler for the current speed */
+ if (self->io.speed > 115200)
+ nsc_ircc_fir_interrupt(self, iobase, eir);
+ else
+ nsc_ircc_sir_interrupt(self, eir);
+ }
+
+ outb(self->ier, iobase+IER); /* Restore interrupts */
+ outb(bsr, iobase+BSR); /* Restore bank register */
+
+ spin_unlock(&self->lock);
+ return IRQ_RETVAL(eir);
+}
+
+/*
+ * Function nsc_ircc_is_receiving (self)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self)
+{
+ unsigned long flags;
+ int status = FALSE;
+ int iobase;
+ __u8 bank;
+
+ IRDA_ASSERT(self != NULL, return FALSE;);
+
+ spin_lock_irqsave(&self->lock, flags);
+
+ if (self->io.speed > 115200) {
+ iobase = self->io.fir_base;
+
+ /* Check if rx FIFO is not empty */
+ bank = inb(iobase+BSR);
+ switch_bank(iobase, BANK2);
+ if ((inb(iobase+RXFLV) & 0x3f) != 0) {
+ /* We are receiving something */
+ status = TRUE;
+ }
+ outb(bank, iobase+BSR);
+ } else
+ status = (self->rx_buff.state != OUTSIDE_FRAME);
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ return status;
+}
+
+/*
+ * Function nsc_ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int nsc_ircc_net_open(struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ int iobase;
+ char hwname[32];
+ __u8 bank;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = (struct nsc_ircc_cb *) dev->priv;
+
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ iobase = self->io.fir_base;
+
+ if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
+ IRDA_WARNING("%s, unable to allocate irq=%d\n",
+ driver_name, self->io.irq);
+ return -EAGAIN;
+ }
+ /*
+ * Always allocate the DMA channel after the IRQ, and clean up on
+ * failure.
+ */
+ if (request_dma(self->io.dma, dev->name)) {
+ IRDA_WARNING("%s, unable to allocate dma=%d\n",
+ driver_name, self->io.dma);
+ free_irq(self->io.irq, dev);
+ return -EAGAIN;
+ }
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* turn on interrupts */
+ switch_bank(iobase, BANK0);
+ outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ /* Ready to play! */
+ netif_start_queue(dev);
+
+ /* Give self a hardware name */
+ sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open(dev, &self->qos, hwname);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int nsc_ircc_net_close(struct net_device *dev)
+{
+ struct nsc_ircc_cb *self;
+ int iobase;
+ __u8 bank;
+
+ IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = (struct nsc_ircc_cb *) dev->priv;
+ IRDA_ASSERT(self != NULL, return 0;);
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ iobase = self->io.fir_base;
+
+ disable_dma(self->io.dma);
+
+ /* Save current bank */
+ bank = inb(iobase+BSR);
+
+ /* Disable interrupts */
+ switch_bank(iobase, BANK0);
+ outb(0, iobase+IER);
+
+ free_irq(self->io.irq, dev);
+ free_dma(self->io.dma);
+
+ /* Restore bank register */
+ outb(bank, iobase+BSR);
+
+ return 0;
+}
+
+/*
+ * Function nsc_ircc_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct nsc_ircc_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+
+ self = dev->priv;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ spin_lock_irqsave(&self->lock, flags);
+ nsc_ircc_change_speed(self, irq->ifr_baudrate);
+ spin_unlock_irqrestore(&self->lock, flags);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ /* This is already protected */
+ irq->ifr_receiving = nsc_ircc_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
+{
+ struct nsc_ircc_cb *self = (struct nsc_ircc_cb *) dev->priv;
+
+ return &self->stats;
+}
+
+static void nsc_ircc_suspend(struct nsc_ircc_cb *self)
+{
+ IRDA_MESSAGE("%s, Suspending\n", driver_name);
+
+ if (self->io.suspended)
+ return;
+
+ nsc_ircc_net_close(self->netdev);
+
+ self->io.suspended = 1;
+}
+
+static void nsc_ircc_wakeup(struct nsc_ircc_cb *self)
+{
+ if (!self->io.suspended)
+ return;
+
+ nsc_ircc_setup(&self->io);
+ nsc_ircc_net_open(self->netdev);
+
+ IRDA_MESSAGE("%s, Waking up\n", driver_name);
+
+ self->io.suspended = 0;
+}
+
+static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+ struct nsc_ircc_cb *self = (struct nsc_ircc_cb*) dev->data;
+ if (self) {
+ switch (rqst) {
+ case PM_SUSPEND:
+ nsc_ircc_suspend(self);
+ break;
+ case PM_RESUME:
+ nsc_ircc_wakeup(self);
+ break;
+ }
+ }
+ return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("NSC IrDA Device Driver");
+MODULE_LICENSE("GPL");
+
+
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "Base I/O addresses");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ lines");
+module_param_array(dma, int, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channels");
+module_param(dongle_id, int, 0);
+MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
+
+module_init(nsc_ircc_init);
+module_exit(nsc_ircc_cleanup);
+