Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..31cb128
--- /dev/null
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -0,0 +1,348 @@
+/*
+ * vmlinux.lds.S -- master linker script for m68knommu arch
+ *
+ * (C) Copyright 2002-2004, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This ends up looking compilcated, because of the number of
+ * address variations for ram and rom/flash layouts. The real
+ * work of the linker script is all at the end, and reasonably
+ * strait forward.
+ */
+
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+
+/*
+ * Original Palm pilot (same for Xcopilot).
+ * There is really only a rom target for this.
+ */
+#ifdef CONFIG_PILOT3
+#define ROMVEC_START 0x10c00000
+#define ROMVEC_LENGTH 0x10400
+#define ROM_START 0x10c10400
+#define ROM_LENGTH 0xfec00
+#define ROM_END 0x10d00000
+#define RAMVEC_START 0x00000000
+#define RAMVEC_LENGTH 0x400
+#define RAM_START 0x10000400
+#define RAM_LENGTH 0xffc00
+#define RAM_END 0x10100000
+#define _ramend _ram_end_notused
+#define DATA_ADDR RAM_START
+#endif
+
+/*
+ * Same setup on both the uCsimm and uCdimm.
+ */
+#if defined(CONFIG_UCSIMM) || defined(CONFIG_UCDIMM)
+#ifdef CONFIG_RAMKERNEL
+#define ROMVEC_START 0x10c10000
+#define ROMVEC_LENGTH 0x400
+#define ROM_START 0x10c10400
+#define ROM_LENGTH 0x1efc00
+#define ROM_END 0x10e00000
+#define RAMVEC_START 0x00000000
+#define RAMVEC_LENGTH 0x400
+#define RAM_START 0x00020400
+#define RAM_LENGTH 0x7dfc00
+#define RAM_END 0x00800000
+#endif
+#ifdef CONFIG_ROMKERNEL
+#define ROMVEC_START 0x10c10000
+#define ROMVEC_LENGTH 0x400
+#define ROM_START 0x10c10400
+#define ROM_LENGTH 0x1efc00
+#define ROM_END 0x10e00000
+#define RAMVEC_START 0x00000000
+#define RAMVEC_LENGTH 0x400
+#define RAM_START 0x00020000
+#define RAM_LENGTH 0x600000
+#define RAM_END 0x00800000
+#endif
+#ifdef CONFIG_HIMEMKERNEL
+#define ROMVEC_START 0x00600000
+#define ROMVEC_LENGTH 0x400
+#define ROM_START 0x00600400
+#define ROM_LENGTH 0x1efc00
+#define ROM_END 0x007f0000
+#define RAMVEC_START 0x00000000
+#define RAMVEC_LENGTH 0x400
+#define RAM_START 0x00020000
+#define RAM_LENGTH 0x5e0000
+#define RAM_END 0x00600000
+#endif
+#endif
+
+#ifdef CONFIG_DRAGEN2
+#define RAM_START 0x10000
+#define RAM_LENGTH 0x7f0000
+#endif
+
+#ifdef CONFIG_UCQUICC
+#define ROMVEC_START 0x00000000
+#define ROMVEC_LENGTH 0x404
+#define ROM_START 0x00000404
+#define ROM_LENGTH 0x1ff6fc
+#define ROM_END 0x00200000
+#define RAMVEC_START 0x00200000
+#define RAMVEC_LENGTH 0x404
+#define RAM_START 0x00200404
+#define RAM_LENGTH 0x1ff6fc
+#define RAM_END 0x00400000
+#endif
+
+/*
+ * The standard Arnewsh 5206 board only has 1MiB of ram. Not normally
+ * enough to be useful. Assume the user has fitted something larger,
+ * at least 4MiB in size. No point in not letting the kernel completely
+ * link, it will be obvious if it is too big when they go to load it.
+ */
+#if defined(CONFIG_ARN5206)
+#define RAM_START 0x10000
+#define RAM_LENGTH 0x3f0000
+#endif
+
+/*
+ * The Motorola 5206eLITE board only has 1MiB of static RAM.
+ */
+#if defined(CONFIG_ELITE)
+#define RAM_START 0x30020000
+#define RAM_END 0xe0000
+#endif
+
+/*
+ * All the Motorola eval boards have the same basic arrangement.
+ * The end of RAM will vary depending on how much ram is fitted,
+ * but this isn't important here, we assume at least 4MiB.
+ */
+#if defined(CONFIG_M5206eC3) || defined(CONFIG_M5249C3) || \
+ defined(CONFIG_M5272C3) || defined(CONFIG_M5307C3) || \
+ defined(CONFIG_ARN5307) || defined(CONFIG_M5407C3) || \
+ defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB)
+#define RAM_START 0x20000
+#define RAM_LENGTH 0x3e0000
+#endif
+
+/*
+ * The senTec COBRA5272 board has nearly the same memory layout as
+ * the M5272C3. We assume 16MiB ram.
+ */
+#if defined(CONFIG_COBRA5272)
+#define RAM_START 0x20000
+#define RAM_LENGTH 0xfe0000
+#endif
+
+#if defined(CONFIG_M5282EVB)
+#define RAM_START 0x10000
+#define RAM_LENGTH 0x3f0000
+#endif
+
+/*
+ * The senTec COBRA5282 board has the same memory layout as the M5282EVB.
+ */
+#if defined(CONFIG_COBRA5282)
+#define RAM_START 0x10000
+#define RAM_LENGTH 0x3f0000
+#endif
+
+/*
+ * These flash boot boards use all of ram for operation. Again the
+ * actual memory size is not important here, assume at least 4MiB.
+ * They currently have no support for running in flash.
+ */
+#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+ defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
+ defined(CONFIG_HW_FEITH)
+#define RAM_START 0x400
+#define RAM_LENGTH 0x3ffc00
+#endif
+
+/*
+ * Sneha Boards mimimun memmory
+ * The end of RAM will vary depending on how much ram is fitted,
+ * but this isn't important here, we assume at least 4MiB.
+ */
+#if defined(CONFIG_CPU16B)
+#define RAM_START 0x20000
+#define RAM_LENGTH 0x3e0000
+#endif
+
+
+#if defined(CONFIG_RAMKERNEL)
+#define TEXT ram
+#define DATA ram
+#define INIT ram
+#define BSS ram
+#endif
+#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
+#define TEXT rom
+#define DATA ram
+#define INIT ram
+#define BSS ram
+#endif
+
+#ifndef DATA_ADDR
+#define DATA_ADDR
+#endif
+
+
+OUTPUT_ARCH(m68k)
+ENTRY(_start)
+
+MEMORY {
+#ifdef RAMVEC_START
+ ramvec : ORIGIN = RAMVEC_START, LENGTH = RAMVEC_LENGTH
+#endif
+ ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
+#ifdef RAM_END
+ eram : ORIGIN = RAM_END, LENGTH = 0
+#endif
+#ifdef ROM_START
+ romvec : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
+ rom : ORIGIN = ROM_START, LENGTH = ROM_LENGTH
+ erom : ORIGIN = ROM_END, LENGTH = 0
+#endif
+}
+
+jiffies = jiffies_64 + 4;
+
+SECTIONS {
+
+#ifdef ROMVEC_START
+ . = ROMVEC_START ;
+ .romvec : {
+ __rom_start = . ;
+ _romvec = .;
+ *(.data.initvect)
+ } > romvec
+#endif
+
+ .text : {
+ _stext = . ;
+ *(.text)
+ SCHED_TEXT
+ *(.text.lock)
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+
+ *(.rodata) *(.rodata.*)
+ *(__vermagic) /* Kernel version magic */
+ *(.rodata1)
+ *(.rodata.str1.1)
+
+ /* Kernel symbol table: Normal symbols */
+ . = ALIGN(4);
+ __start___ksymtab = .;
+ *(__ksymtab)
+ __stop___ksymtab = .;
+
+ /* Kernel symbol table: GPL-only symbols */
+ __start___ksymtab_gpl = .;
+ *(__ksymtab_gpl)
+ __stop___ksymtab_gpl = .;
+
+ /* Kernel symbol table: Normal symbols */
+ __start___kcrctab = .;
+ *(__kcrctab)
+ __stop___kcrctab = .;
+
+ /* Kernel symbol table: GPL-only symbols */
+ __start___kcrctab_gpl = .;
+ *(__kcrctab_gpl)
+ __stop___kcrctab_gpl = .;
+
+ /* Kernel symbol table: strings */
+ *(__ksymtab_strings)
+
+ /* Built-in module parameters */
+ __start___param = .;
+ *(__param)
+ __stop___param = .;
+
+ . = ALIGN(4) ;
+ _etext = . ;
+ } > TEXT
+
+#ifdef ROM_END
+ . = ROM_END ;
+ .erom : {
+ __rom_end = . ;
+ } > erom
+#endif
+#ifdef RAMVEC_START
+ . = RAMVEC_START ;
+ .ramvec : {
+ __ramvec = .;
+ } > ramvec
+#endif
+
+ .data DATA_ADDR : {
+ . = ALIGN(4);
+ _sdata = . ;
+ *(.data)
+ . = ALIGN(8192) ;
+ *(.data.init_task)
+ _edata = . ;
+ } > DATA
+
+ .init : {
+ . = ALIGN(4096);
+ __init_begin = .;
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ *(.init.data)
+ . = ALIGN(16);
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ __initcall_start = .;
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ __initcall_end = .;
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ __security_initcall_start = .;
+ *(.security_initcall.init)
+ __security_initcall_end = .;
+ . = ALIGN(4);
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ . = ALIGN(4096);
+ __init_end = .;
+ } > INIT
+
+ /DISCARD/ : {
+ *(.exit.text)
+ *(.exit.data)
+ *(.exitcall.exit)
+ }
+
+ .bss : {
+ . = ALIGN(4);
+ _sbss = . ;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = . ;
+ } > BSS
+
+#ifdef RAM_END
+ . = RAM_END ;
+ .eram : {
+ __ramend = . ;
+ _ramend = . ;
+ } > eram
+#endif
+}
+