[S390] Remove P390 support.
Most likely it is broken anyway because of the changes in memory
detection. Since we can't test it and there are probably better ways
that using a P390 card, remove support for it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 4c0ec7b..2a2ca26 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -183,10 +183,6 @@
if (cpuinfo->cpu_id.version == 0xff)
machine_flags |= MACHINE_FLAG_VM;
- /* Running on a P/390 ? */
- if (cpuinfo->cpu_id.machine == 0x7490)
- machine_flags |= MACHINE_FLAG_P390;
-
/* Running under KVM ? */
if (cpuinfo->cpu_id.version == 0xfe)
machine_flags |= MACHINE_FLAG_KVM;
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9c92407..b358e18 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -205,12 +205,6 @@
SET_CONSOLE_SCLP;
#endif
}
- } else if (MACHINE_IS_P390) {
-#if defined(CONFIG_TN3215_CONSOLE)
- SET_CONSOLE_3215;
-#elif defined(CONFIG_TN3270_CONSOLE)
- SET_CONSOLE_3270;
-#endif
} else {
#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
SET_CONSOLE_SCLP;
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 4b63250..d3ec9b5 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -373,7 +373,7 @@
struct raw3215_req *req;
struct tty_struct *tty;
int cstat, dstat;
- int count, slen;
+ int count;
raw = cdev->dev.driver_data;
req = (struct raw3215_req *) intparm;
@@ -390,8 +390,6 @@
break;
/* Attention interrupt, someone hit the enter key */
raw3215_mk_read_req(raw);
- if (MACHINE_IS_P390)
- memset(raw->inbuf, 0, RAW3215_INBUF_SIZE);
tasklet_schedule(&raw->tasklet);
break;
case 0x08:
@@ -414,11 +412,6 @@
tty = raw->tty;
count = 160 - req->residual;
- if (MACHINE_IS_P390) {
- slen = strnlen(raw->inbuf, RAW3215_INBUF_SIZE);
- if (count > slen)
- count = slen;
- } else
EBCASC(raw->inbuf, count);
cchar = ctrlchar_handle(raw->inbuf, count, tty);
switch (cchar & CTRLCHAR_MASK) {
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index fb97cf5..3c8b25e 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -883,8 +883,6 @@
unsigned long flags;
int rc;
- if (!MACHINE_HAS_SCLP)
- return -ENODEV;
spin_lock_irqsave(&sclp_lock, flags);
/* Check for previous or running initialization */
if (sclp_init_state != sclp_init_state_uninitialized) {
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
index 8e76973..f4a3237 100644
--- a/drivers/s390/net/cu3088.c
+++ b/drivers/s390/net/cu3088.c
@@ -36,7 +36,6 @@
"CTC/A",
"ESCON channel",
"FICON channel",
- "P390 LCS card",
"OSA LCS card",
"CLAW channel device",
"unknown channel type",
@@ -49,7 +48,6 @@
{ CCW_DEVICE(0x3088, 0x08), .driver_info = channel_type_parallel },
{ CCW_DEVICE(0x3088, 0x1f), .driver_info = channel_type_escon },
{ CCW_DEVICE(0x3088, 0x1e), .driver_info = channel_type_ficon },
- { CCW_DEVICE(0x3088, 0x01), .driver_info = channel_type_p390 },
{ CCW_DEVICE(0x3088, 0x60), .driver_info = channel_type_osa2 },
{ CCW_DEVICE(0x3088, 0x61), .driver_info = channel_type_claw },
{ /* end of list */ }
diff --git a/drivers/s390/net/cu3088.h b/drivers/s390/net/cu3088.h
index 1753661..d8558a7 100644
--- a/drivers/s390/net/cu3088.h
+++ b/drivers/s390/net/cu3088.h
@@ -17,9 +17,6 @@
/* Device is a FICON channel */
channel_type_ficon,
- /* Device is a P390 LCS card */
- channel_type_p390,
-
/* Device is a OSA2 card */
channel_type_osa2,
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index 80747ba..f09ee3f 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -65,7 +65,6 @@
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
-#define MACHINE_FLAG_P390 (1UL << 2)
#define MACHINE_FLAG_CSP (1UL << 3)
#define MACHINE_FLAG_MVPG (1UL << 4)
#define MACHINE_FLAG_DIAG44 (1UL << 5)
@@ -101,7 +100,6 @@
#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF)
#endif /* __s390x__ */
-#define MACHINE_HAS_SCLP (!MACHINE_IS_P390)
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
/*