[SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adapters
- Add Basic support for SLI4 Loopback.
(CR 124951, 125766, 124951, 125843, 125832, 125843)
- Added missing protection in setting/clearing of phba->link_flag bit
field (CR 125994)
- Use link type and link number obtained from READ_CONFIG mailbox
command. (CR 126264)
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e27cb44..23a2759 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3619,8 +3619,8 @@
* lpfc_reset_barrier - Make HBA ready for HBA reset
* @phba: Pointer to HBA context object.
*
- * This function is called before resetting an HBA. This
- * function requests HBA to quiesce DMAs before a reset.
+ * This function is called before resetting an HBA. This function is called
+ * with hbalock held and requests HBA to quiesce DMAs before a reset.
**/
void lpfc_reset_barrier(struct lpfc_hba *phba)
{
@@ -6267,9 +6267,12 @@
goto out_unset_queue;
}
} else if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) {
- rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
- if (rc)
- goto out_unset_queue;
+ /* don't perform init_link on SLI4 FC port loopback test */
+ if (!(phba->link_flag & LS_LOOPBACK_MODE)) {
+ rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+ if (rc)
+ goto out_unset_queue;
+ }
}
mempool_free(mboxq, phba->mbox_mem_pool);
return rc;
@@ -7540,6 +7543,7 @@
struct ulp_bde64 *bpl = NULL;
struct ulp_bde64 bde;
struct sli4_sge *sgl = NULL;
+ struct lpfc_dmabuf *dmabuf;
IOCB_t *icmd;
int numBdes = 0;
int i = 0;
@@ -7558,9 +7562,12 @@
* have not been byteswapped yet so there is no
* need to swap them back.
*/
- bpl = (struct ulp_bde64 *)
- ((struct lpfc_dmabuf *)piocbq->context3)->virt;
+ if (piocbq->context3)
+ dmabuf = (struct lpfc_dmabuf *)piocbq->context3;
+ else
+ return xritag;
+ bpl = (struct ulp_bde64 *)dmabuf->virt;
if (!bpl)
return xritag;
@@ -7670,6 +7677,7 @@
struct ulp_bde64 bde;
struct lpfc_nodelist *ndlp;
uint32_t *pcmd;
+ uint32_t if_type;
fip = phba->hba_flag & HBA_FIP_SUPPORT;
/* The fcp commands will set command type */
@@ -7743,7 +7751,9 @@
>> LPFC_FIP_ELS_ID_SHIFT);
pcmd = (uint32_t *) (((struct lpfc_dmabuf *)
iocbq->context2)->virt);
- if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
+ if_type = bf_get(lpfc_sli_intf_if_type,
+ &phba->sli4_hba.sli_intf);
+ if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
*pcmd == ELS_CMD_SCR ||
*pcmd == ELS_CMD_PLOGI)) {
@@ -7776,6 +7786,8 @@
/* The entire sequence is transmitted for this IOCB */
xmit_len = total_len;
cmnd = CMD_XMIT_SEQUENCE64_CR;
+ if (phba->link_flag & LS_LOOPBACK_MODE)
+ bf_set(wqe_xo, &wqe->xmit_sequence.wge_ctl, 1);
case CMD_XMIT_SEQUENCE64_CR:
/* word3 iocb=io_tag32 wqe=reserved */
wqe->xmit_sequence.rsvd3 = 0;