omap3evm: Initialize vmmc and vmmc_aux regulators
Initialize vmmc and vmmc_aux regulators
Note that the omap3evm_twldata.vmmc1 and omap3evm_twldata.vsim
are set in omap3_evm_i2c_init() to avoid a merge conflict
with the MFD tree. These will be initialized in omap3evm_i2c_boardinfo
as a fix later on.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 010454f..c0336b0 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -28,6 +28,8 @@
#include <linux/i2c/twl4030.h>
#include <linux/usb/otg.h>
+#include <linux/regulator/machine.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -127,6 +129,44 @@
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
}
+static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply omap3evm_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3evm_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3evm_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3evm_vsim_supply,
+};
+
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -169,6 +209,10 @@
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ omap3evm_vmmc1_supply.dev = mmc[0].dev;
+ omap3evm_vsim_supply.dev = mmc[0].dev;
+
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
@@ -261,6 +305,13 @@
static int __init omap3_evm_i2c_init(void)
{
+ /*
+ * REVISIT: These entries can be set in omap3evm_twl_data
+ * after a merge with MFD tree
+ */
+ omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
+ omap3evm_twldata.vsim = &omap3evm_vsim;
+
omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
ARRAY_SIZE(omap3evm_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);