[SCSI] Merge sym53c8xx_comm.h and sym53c8xx_defs.h into ncr driver
When the sym1 driver was in the tree, it used to share various parts of
its infrastructure with the ncr driver. Now it's gone, these files are
just an annoyance, so merge sym53c8xx_comm.h into ncr53c8xx.c and merge
sym53c8xx_defs.h into ncr53c8xx.h.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 8e1c77c..3235070 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -131,7 +131,739 @@
#define NAME53C "ncr53c"
#define NAME53C8XX "ncr53c8xx"
-#include "sym53c8xx_comm.h"
+
+/*==========================================================
+**
+** Debugging tags
+**
+**==========================================================
+*/
+
+#define DEBUG_ALLOC (0x0001)
+#define DEBUG_PHASE (0x0002)
+#define DEBUG_QUEUE (0x0008)
+#define DEBUG_RESULT (0x0010)
+#define DEBUG_POINTER (0x0020)
+#define DEBUG_SCRIPT (0x0040)
+#define DEBUG_TINY (0x0080)
+#define DEBUG_TIMING (0x0100)
+#define DEBUG_NEGO (0x0200)
+#define DEBUG_TAGS (0x0400)
+#define DEBUG_SCATTER (0x0800)
+#define DEBUG_IC (0x1000)
+
+/*
+** Enable/Disable debug messages.
+** Can be changed at runtime too.
+*/
+
+#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
+static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
+ #define DEBUG_FLAGS ncr_debug
+#else
+ #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS
+#endif
+
+static inline struct list_head *ncr_list_pop(struct list_head *head)
+{
+ if (!list_empty(head)) {
+ struct list_head *elem = head->next;
+
+ list_del(elem);
+ return elem;
+ }
+
+ return NULL;
+}
+
+/*==========================================================
+**
+** Simple power of two buddy-like allocator.
+**
+** This simple code is not intended to be fast, but to
+** provide power of 2 aligned memory allocations.
+** Since the SCRIPTS processor only supplies 8 bit
+** arithmetic, this allocator allows simple and fast
+** address calculations from the SCRIPTS code.
+** In addition, cache line alignment is guaranteed for
+** power of 2 cache line size.
+** Enhanced in linux-2.3.44 to provide a memory pool
+** per pcidev to support dynamic dma mapping. (I would
+** have preferred a real bus astraction, btw).
+**
+**==========================================================
+*/
+
+#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */
+#if PAGE_SIZE >= 8192
+#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */
+#else
+#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */
+#endif
+#define MEMO_FREE_UNUSED /* Free unused pages immediately */
+#define MEMO_WARN 1
+#define MEMO_GFP_FLAGS GFP_ATOMIC
+#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER)
+#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT)
+#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1)
+
+typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */
+typedef struct device *m_bush_t; /* Something that addresses DMAable */
+
+typedef struct m_link { /* Link between free memory chunks */
+ struct m_link *next;
+} m_link_s;
+
+typedef struct m_vtob { /* Virtual to Bus address translation */
+ struct m_vtob *next;
+ m_addr_t vaddr;
+ m_addr_t baddr;
+} m_vtob_s;
+#define VTOB_HASH_SHIFT 5
+#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT)
+#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1)
+#define VTOB_HASH_CODE(m) \
+ ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
+
+typedef struct m_pool { /* Memory pool of a given kind */
+ m_bush_t bush;
+ m_addr_t (*getp)(struct m_pool *);
+ void (*freep)(struct m_pool *, m_addr_t);
+ int nump;
+ m_vtob_s *(vtob[VTOB_HASH_SIZE]);
+ struct m_pool *next;
+ struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
+} m_pool_s;
+
+static void *___m_alloc(m_pool_s *mp, int size)
+{
+ int i = 0;
+ int s = (1 << MEMO_SHIFT);
+ int j;
+ m_addr_t a;
+ m_link_s *h = mp->h;
+
+ if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+ return NULL;
+
+ while (size > s) {
+ s <<= 1;
+ ++i;
+ }
+
+ j = i;
+ while (!h[j].next) {
+ if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+ h[j].next = (m_link_s *)mp->getp(mp);
+ if (h[j].next)
+ h[j].next->next = NULL;
+ break;
+ }
+ ++j;
+ s <<= 1;
+ }
+ a = (m_addr_t) h[j].next;
+ if (a) {
+ h[j].next = h[j].next->next;
+ while (j > i) {
+ j -= 1;
+ s >>= 1;
+ h[j].next = (m_link_s *) (a+s);
+ h[j].next->next = NULL;
+ }
+ }
+#ifdef DEBUG
+ printk("___m_alloc(%d) = %p\n", size, (void *) a);
+#endif
+ return (void *) a;
+}
+
+static void ___m_free(m_pool_s *mp, void *ptr, int size)
+{
+ int i = 0;
+ int s = (1 << MEMO_SHIFT);
+ m_link_s *q;
+ m_addr_t a, b;
+ m_link_s *h = mp->h;
+
+#ifdef DEBUG
+ printk("___m_free(%p, %d)\n", ptr, size);
+#endif
+
+ if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+ return;
+
+ while (size > s) {
+ s <<= 1;
+ ++i;
+ }
+
+ a = (m_addr_t) ptr;
+
+ while (1) {
+#ifdef MEMO_FREE_UNUSED
+ if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+ mp->freep(mp, a);
+ break;
+ }
+#endif
+ b = a ^ s;
+ q = &h[i];
+ while (q->next && q->next != (m_link_s *) b) {
+ q = q->next;
+ }
+ if (!q->next) {
+ ((m_link_s *) a)->next = h[i].next;
+ h[i].next = (m_link_s *) a;
+ break;
+ }
+ q->next = q->next->next;
+ a = a & b;
+ s <<= 1;
+ ++i;
+ }
+}
+
+static DEFINE_SPINLOCK(ncr53c8xx_lock);
+
+static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
+{
+ void *p;
+
+ p = ___m_alloc(mp, size);
+
+ if (DEBUG_FLAGS & DEBUG_ALLOC)
+ printk ("new %-10s[%4d] @%p.\n", name, size, p);
+
+ if (p)
+ memset(p, 0, size);
+ else if (uflags & MEMO_WARN)
+ printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
+
+ return p;
+}
+
+#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN)
+
+static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
+{
+ if (DEBUG_FLAGS & DEBUG_ALLOC)
+ printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
+
+ ___m_free(mp, ptr, size);
+
+}
+
+/*
+ * With pci bus iommu support, we use a default pool of unmapped memory
+ * for memory we donnot need to DMA from/to and one pool per pcidev for
+ * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
+ */
+
+static m_addr_t ___mp0_getp(m_pool_s *mp)
+{
+ m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
+ if (m)
+ ++mp->nump;
+ return m;
+}
+
+static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
+{
+ free_pages(m, MEMO_PAGE_ORDER);
+ --mp->nump;
+}
+
+static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
+
+/*
+ * DMAable pools.
+ */
+
+/*
+ * With pci bus iommu support, we maintain one pool per pcidev and a
+ * hashed reverse table for virtual to bus physical address translations.
+ */
+static m_addr_t ___dma_getp(m_pool_s *mp)
+{
+ m_addr_t vp;
+ m_vtob_s *vbp;
+
+ vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
+ if (vbp) {
+ dma_addr_t daddr;
+ vp = (m_addr_t) dma_alloc_coherent(mp->bush,
+ PAGE_SIZE<<MEMO_PAGE_ORDER,
+ &daddr, GFP_ATOMIC);
+ if (vp) {
+ int hc = VTOB_HASH_CODE(vp);
+ vbp->vaddr = vp;
+ vbp->baddr = daddr;
+ vbp->next = mp->vtob[hc];
+ mp->vtob[hc] = vbp;
+ ++mp->nump;
+ return vp;
+ }
+ }
+ if (vbp)
+ __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+ return 0;
+}
+
+static void ___dma_freep(m_pool_s *mp, m_addr_t m)
+{
+ m_vtob_s **vbpp, *vbp;
+ int hc = VTOB_HASH_CODE(m);
+
+ vbpp = &mp->vtob[hc];
+ while (*vbpp && (*vbpp)->vaddr != m)
+ vbpp = &(*vbpp)->next;
+ if (*vbpp) {
+ vbp = *vbpp;
+ *vbpp = (*vbpp)->next;
+ dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
+ (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
+ __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+ --mp->nump;
+ }
+}
+
+static inline m_pool_s *___get_dma_pool(m_bush_t bush)
+{
+ m_pool_s *mp;
+ for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
+ return mp;
+}
+
+static m_pool_s *___cre_dma_pool(m_bush_t bush)
+{
+ m_pool_s *mp;
+ mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
+ if (mp) {
+ memset(mp, 0, sizeof(*mp));
+ mp->bush = bush;
+ mp->getp = ___dma_getp;
+ mp->freep = ___dma_freep;
+ mp->next = mp0.next;
+ mp0.next = mp;
+ }
+ return mp;
+}
+
+static void ___del_dma_pool(m_pool_s *p)
+{
+ struct m_pool **pp = &mp0.next;
+
+ while (*pp && *pp != p)
+ pp = &(*pp)->next;
+ if (*pp) {
+ *pp = (*pp)->next;
+ __m_free(&mp0, p, sizeof(*p), "MPOOL");
+ }
+}
+
+static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
+{
+ u_long flags;
+ struct m_pool *mp;
+ void *m = NULL;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (!mp)
+ mp = ___cre_dma_pool(bush);
+ if (mp)
+ m = __m_calloc(mp, size, name);
+ if (mp && !mp->nump)
+ ___del_dma_pool(mp);
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+
+ return m;
+}
+
+static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
+{
+ u_long flags;
+ struct m_pool *mp;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (mp)
+ __m_free(mp, m, size, name);
+ if (mp && !mp->nump)
+ ___del_dma_pool(mp);
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+}
+
+static m_addr_t __vtobus(m_bush_t bush, void *m)
+{
+ u_long flags;
+ m_pool_s *mp;
+ int hc = VTOB_HASH_CODE(m);
+ m_vtob_s *vp = NULL;
+ m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (mp) {
+ vp = mp->vtob[hc];
+ while (vp && (m_addr_t) vp->vaddr != a)
+ vp = vp->next;
+ }
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+ return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
+}
+
+#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n)
+#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n)
+#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n)
+#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n)
+#define _vtobus(np, p) __vtobus(np->dev, p)
+#define vtobus(p) _vtobus(np, p)
+
+/*
+ * Deal with DMA mapping/unmapping.
+ */
+
+/* To keep track of the dma mapping (sg/single) that has been set */
+#define __data_mapped SCp.phase
+#define __data_mapping SCp.have_data_in
+
+static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ switch(cmd->__data_mapped) {
+ case 2:
+ dma_unmap_sg(dev, cmd->buffer, cmd->use_sg,
+ cmd->sc_data_direction);
+ break;
+ case 1:
+ dma_unmap_single(dev, cmd->__data_mapping,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ break;
+ }
+ cmd->__data_mapped = 0;
+}
+
+static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ dma_addr_t mapping;
+
+ if (cmd->request_bufflen == 0)
+ return 0;
+
+ mapping = dma_map_single(dev, cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ cmd->__data_mapped = 1;
+ cmd->__data_mapping = mapping;
+
+ return mapping;
+}
+
+static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ int use_sg;
+
+ if (cmd->use_sg == 0)
+ return 0;
+
+ use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg,
+ cmd->sc_data_direction);
+ cmd->__data_mapped = 2;
+ cmd->__data_mapping = use_sg;
+
+ return use_sg;
+}
+
+#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd)
+#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd)
+#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd)
+
+/*==========================================================
+**
+** Driver setup.
+**
+** This structure is initialized from linux config
+** options. It can be overridden at boot-up by the boot
+** command line.
+**
+**==========================================================
+*/
+static struct ncr_driver_setup
+ driver_setup = SCSI_NCR_DRIVER_SETUP;
+
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+static struct ncr_driver_setup
+ driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP;
+#endif
+
+#define initverbose (driver_setup.verbose)
+#define bootverbose (np->verbose)
+
+
+/*===================================================================
+**
+** Driver setup from the boot command line
+**
+**===================================================================
+*/
+
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+#define OPT_TAGS 1
+#define OPT_MASTER_PARITY 2
+#define OPT_SCSI_PARITY 3
+#define OPT_DISCONNECTION 4
+#define OPT_SPECIAL_FEATURES 5
+#define OPT_UNUSED_1 6
+#define OPT_FORCE_SYNC_NEGO 7
+#define OPT_REVERSE_PROBE 8
+#define OPT_DEFAULT_SYNC 9
+#define OPT_VERBOSE 10
+#define OPT_DEBUG 11
+#define OPT_BURST_MAX 12
+#define OPT_LED_PIN 13
+#define OPT_MAX_WIDE 14
+#define OPT_SETTLE_DELAY 15
+#define OPT_DIFF_SUPPORT 16
+#define OPT_IRQM 17
+#define OPT_PCI_FIX_UP 18
+#define OPT_BUS_CHECK 19
+#define OPT_OPTIMIZE 20
+#define OPT_RECOVERY 21
+#define OPT_SAFE_SETUP 22
+#define OPT_USE_NVRAM 23
+#define OPT_EXCLUDE 24
+#define OPT_HOST_ID 25
+
+#ifdef SCSI_NCR_IARB_SUPPORT
+#define OPT_IARB 26
+#endif
+
+static char setup_token[] __initdata =
+ "tags:" "mpar:"
+ "spar:" "disc:"
+ "specf:" "ultra:"
+ "fsn:" "revprob:"
+ "sync:" "verb:"
+ "debug:" "burst:"
+ "led:" "wide:"
+ "settle:" "diff:"
+ "irqm:" "pcifix:"
+ "buschk:" "optim:"
+ "recovery:"
+ "safe:" "nvram:"
+ "excl:" "hostid:"
+#ifdef SCSI_NCR_IARB_SUPPORT
+ "iarb:"
+#endif
+ ; /* DONNOT REMOVE THIS ';' */
+
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+static int __init get_setup_token(char *p)
+{
+ char *cur = setup_token;
+ char *pc;
+ int i = 0;
+
+ while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+ ++pc;
+ ++i;
+ if (!strncmp(p, cur, pc - cur))
+ return i;
+ cur = pc;
+ }
+ return 0;
+}
+
+
+static int __init sym53c8xx__setup(char *str)
+{
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+ char *cur = str;
+ char *pc, *pv;
+ int i, val, c;
+ int xi = 0;
+
+ while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+ char *pe;
+
+ val = 0;
+ pv = pc;
+ c = *++pv;
+
+ if (c == 'n')
+ val = 0;
+ else if (c == 'y')
+ val = 1;
+ else
+ val = (int) simple_strtoul(pv, &pe, 0);
+
+ switch (get_setup_token(cur)) {
+ case OPT_TAGS:
+ driver_setup.default_tags = val;
+ if (pe && *pe == '/') {
+ i = 0;
+ while (*pe && *pe != ARG_SEP &&
+ i < sizeof(driver_setup.tag_ctrl)-1) {
+ driver_setup.tag_ctrl[i++] = *pe++;
+ }
+ driver_setup.tag_ctrl[i] = '\0';
+ }
+ break;
+ case OPT_MASTER_PARITY:
+ driver_setup.master_parity = val;
+ break;
+ case OPT_SCSI_PARITY:
+ driver_setup.scsi_parity = val;
+ break;
+ case OPT_DISCONNECTION:
+ driver_setup.disconnection = val;
+ break;
+ case OPT_SPECIAL_FEATURES:
+ driver_setup.special_features = val;
+ break;
+ case OPT_FORCE_SYNC_NEGO:
+ driver_setup.force_sync_nego = val;
+ break;
+ case OPT_REVERSE_PROBE:
+ driver_setup.reverse_probe = val;
+ break;
+ case OPT_DEFAULT_SYNC:
+ driver_setup.default_sync = val;
+ break;
+ case OPT_VERBOSE:
+ driver_setup.verbose = val;
+ break;
+ case OPT_DEBUG:
+ driver_setup.debug = val;
+ break;
+ case OPT_BURST_MAX:
+ driver_setup.burst_max = val;
+ break;
+ case OPT_LED_PIN:
+ driver_setup.led_pin = val;
+ break;
+ case OPT_MAX_WIDE:
+ driver_setup.max_wide = val? 1:0;
+ break;
+ case OPT_SETTLE_DELAY:
+ driver_setup.settle_delay = val;
+ break;
+ case OPT_DIFF_SUPPORT:
+ driver_setup.diff_support = val;
+ break;
+ case OPT_IRQM:
+ driver_setup.irqm = val;
+ break;
+ case OPT_PCI_FIX_UP:
+ driver_setup.pci_fix_up = val;
+ break;
+ case OPT_BUS_CHECK:
+ driver_setup.bus_check = val;
+ break;
+ case OPT_OPTIMIZE:
+ driver_setup.optimize = val;
+ break;
+ case OPT_RECOVERY:
+ driver_setup.recovery = val;
+ break;
+ case OPT_USE_NVRAM:
+ driver_setup.use_nvram = val;
+ break;
+ case OPT_SAFE_SETUP:
+ memcpy(&driver_setup, &driver_safe_setup,
+ sizeof(driver_setup));
+ break;
+ case OPT_EXCLUDE:
+ if (xi < SCSI_NCR_MAX_EXCLUDES)
+ driver_setup.excludes[xi++] = val;
+ break;
+ case OPT_HOST_ID:
+ driver_setup.host_id = val;
+ break;
+#ifdef SCSI_NCR_IARB_SUPPORT
+ case OPT_IARB:
+ driver_setup.iarb = val;
+ break;
+#endif
+ default:
+ printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
+ break;
+ }
+
+ if ((cur = strchr(cur, ARG_SEP)) != NULL)
+ ++cur;
+ }
+#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
+ return 1;
+}
+
+/*===================================================================
+**
+** Get device queue depth from boot command line.
+**
+**===================================================================
+*/
+#define DEF_DEPTH (driver_setup.default_tags)
+#define ALL_TARGETS -2
+#define NO_TARGET -1
+#define ALL_LUNS -2
+#define NO_LUN -1
+
+static int device_queue_depth(int unit, int target, int lun)
+{
+ int c, h, t, u, v;
+ char *p = driver_setup.tag_ctrl;
+ char *ep;
+
+ h = -1;
+ t = NO_TARGET;
+ u = NO_LUN;
+ while ((c = *p++) != 0) {
+ v = simple_strtoul(p, &ep, 0);
+ switch(c) {
+ case '/':
+ ++h;
+ t = ALL_TARGETS;
+ u = ALL_LUNS;
+ break;
+ case 't':
+ if (t != target)
+ t = (target == v) ? v : NO_TARGET;
+ u = ALL_LUNS;
+ break;
+ case 'u':
+ if (u != lun)
+ u = (lun == v) ? v : NO_LUN;
+ break;
+ case 'q':
+ if (h == unit &&
+ (t == ALL_TARGETS || t == target) &&
+ (u == ALL_LUNS || u == lun))
+ return v;
+ break;
+ case '-':
+ t = ALL_TARGETS;
+ u = ALL_LUNS;
+ break;
+ default:
+ break;
+ }
+ p = ep;
+ }
+ return DEF_DEPTH;
+}
/*==========================================================
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index 05c7b83..6a7bef2 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -2,6 +2,7 @@
** Device driver for the PCI-SCSI NCR538XX controller family.
**
** Copyright (C) 1994 Wolfgang Stanglmeier
+** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
@@ -36,15 +37,1275 @@
** And has been ported to NetBSD by
** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
**
+** NVRAM detection and reading.
+** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+**
+** Added support for MIPS big endian systems.
+** Carsten Langgaard, carstenl@mips.com
+** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+**
+** Added support for HP PARISC big endian systems.
+** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+**
*******************************************************************************
*/
#ifndef NCR53C8XX_H
#define NCR53C8XX_H
+#include <linux/config.h>
#include <scsi/scsi_host.h>
-#include "sym53c8xx_defs.h"
+/*
+** If you want a driver as small as possible, do not define the
+** following options.
+*/
+#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+#define SCSI_NCR_DEBUG_INFO_SUPPORT
+
+/*
+** To disable integrity checking, do not define the
+** following option.
+*/
+#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
+# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
+#endif
+
+/* ---------------------------------------------------------------------
+** Take into account kernel configured parameters.
+** Most of these options can be overridden at startup by a command line.
+** ---------------------------------------------------------------------
+*/
+
+/*
+ * For Ultra2 and Ultra3 SCSI support option, use special features.
+ *
+ * Value (default) means:
+ * bit 0 : all features enabled, except:
+ * bit 1 : PCI Write And Invalidate.
+ * bit 2 : Data Phase Mismatch handling from SCRIPTS.
+ *
+ * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
+ * enabled by the driver.
+ */
+#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
+
+#define SCSI_NCR_MAX_SYNC (80)
+
+/*
+ * Allow tags from 2 to 256, default 8
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
+#define SCSI_NCR_MAX_TAGS (2)
+#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
+#define SCSI_NCR_MAX_TAGS (256)
+#else
+#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#endif
+#else
+#define SCSI_NCR_MAX_TAGS (8)
+#endif
+
+/*
+ * Allow tagged command queuing support if configured with default number
+ * of tags set to max (see above).
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
+#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
+#else
+#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
+#endif
+
+/*
+ * Immediate arbitration
+ */
+#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
+#define SCSI_NCR_IARB_SUPPORT
+#endif
+
+/*
+ * Sync transfer frequency at startup.
+ * Allow from 5Mhz to 80Mhz default 20 Mhz.
+ */
+#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
+#undef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
+#endif
+
+#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
+#else
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
+#endif
+
+/*
+ * Disallow disconnections at boot-up
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+#define SCSI_NCR_SETUP_DISCONNECTION (0)
+#else
+#define SCSI_NCR_SETUP_DISCONNECTION (1)
+#endif
+
+/*
+ * Force synchronous negotiation for all targets
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
+#else
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
+#endif
+
+/*
+ * Disable master parity checking (flawed hardwares need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
+#define SCSI_NCR_SETUP_MASTER_PARITY (0)
+#else
+#define SCSI_NCR_SETUP_MASTER_PARITY (1)
+#endif
+
+/*
+ * Disable scsi parity checking (flawed devices may need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
+#define SCSI_NCR_SETUP_SCSI_PARITY (0)
+#else
+#define SCSI_NCR_SETUP_SCSI_PARITY (1)
+#endif
+
+/*
+ * Settle time after reset at boot-up
+ */
+#define SCSI_NCR_SETUP_SETTLE_TIME (2)
+
+/*
+** Bridge quirks work-around option defaulted to 1.
+*/
+#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
+#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
+#endif
+
+/*
+** Work-around common bridge misbehaviour.
+**
+** - Do not flush posted writes in the opposite
+** direction on read.
+** - May reorder DMA writes to memory.
+**
+** This option should not affect performances
+** significantly, so it is the default.
+*/
+#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+
+/*
+** Same as option 1, but also deal with
+** misconfigured interrupts.
+**
+** - Edge triggerred instead of level sensitive.
+** - No interrupt line connected.
+** - IRQ number misconfigured.
+**
+** If no interrupt is delivered, the driver will
+** catch the interrupt conditions 10 times per
+** second. No need to say that this option is
+** not recommended.
+*/
+#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+#define SCSI_NCR_PCIQ_BROKEN_INTR
+
+/*
+** Some bridge designers decided to flush
+** everything prior to deliver the interrupt.
+** This option tries to deal with such a
+** behaviour.
+*/
+#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
+#define SCSI_NCR_PCIQ_SYNC_ON_INTR
+#endif
+
+/*
+** Other parameters not configurable with "make config"
+** Avoid to change these constants, unless you know what you are doing.
+*/
+
+#define SCSI_NCR_ALWAYS_SIMPLE_TAG
+#define SCSI_NCR_MAX_SCATTER (127)
+#define SCSI_NCR_MAX_TARGET (16)
+
+/*
+** Compute some desirable value for CAN_QUEUE
+** and CMD_PER_LUN.
+** The driver will use lower values if these
+** ones appear to be too large.
+*/
+#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
+#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
+
+#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
+#define SCSI_NCR_TIMER_INTERVAL (HZ)
+
+#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
+#define SCSI_NCR_MAX_LUN (16)
+#else
+#define SCSI_NCR_MAX_LUN (1)
+#endif
+
+/*
+ * IO functions definition for big/little endian CPU support.
+ * For now, the NCR is only supported in little endian addressing mode,
+ */
+
+#ifdef __BIG_ENDIAN
+
+#define inw_l2b inw
+#define inl_l2b inl
+#define outw_b2l outw
+#define outl_b2l outl
+
+#define readb_raw readb
+#define writeb_raw writeb
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+#define readw_l2b __raw_readw
+#define readl_l2b __raw_readl
+#define writew_b2l __raw_writew
+#define writel_b2l __raw_writel
+#define readw_raw __raw_readw
+#define readl_raw __raw_readl
+#define writew_raw __raw_writew
+#define writel_raw __raw_writel
+#else /* Other big-endian */
+#define readw_l2b readw
+#define readl_l2b readl
+#define writew_b2l writew
+#define writel_b2l writel
+#define readw_raw readw
+#define readl_raw readl
+#define writew_raw writew
+#define writel_raw writel
+#endif
+
+#else /* little endian */
+
+#define inw_raw inw
+#define inl_raw inl
+#define outw_raw outw
+#define outl_raw outl
+
+#define readb_raw readb
+#define readw_raw readw
+#define readl_raw readl
+#define writeb_raw writeb
+#define writew_raw writew
+#define writel_raw writel
+
+#endif
+
+#if !defined(__hppa__) && !defined(__mips__)
+#ifdef SCSI_NCR_BIG_ENDIAN
+#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
+#endif
+#endif
+
+#define MEMORY_BARRIER() mb()
+
+
+/*
+ * If the NCR uses big endian addressing mode over the
+ * PCI, actual io register addresses for byte and word
+ * accesses must be changed according to lane routing.
+ * Btw, ncr_offb() and ncr_offw() macros only apply to
+ * constants and so donnot generate bloated code.
+ */
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+
+#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
+#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
+
+#else
+
+#define ncr_offb(o) (o)
+#define ncr_offw(o) (o)
+
+#endif
+
+/*
+ * If the CPU and the NCR use same endian-ness addressing,
+ * no byte reordering is needed for script patching.
+ * Macro cpu_to_scr() is to be used for script patching.
+ * Macro scr_to_cpu() is to be used for getting a DWORD
+ * from the script.
+ */
+
+#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw) cpu_to_le32(dw)
+#define scr_to_cpu(dw) le32_to_cpu(dw)
+
+#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw) cpu_to_be32(dw)
+#define scr_to_cpu(dw) be32_to_cpu(dw)
+
+#else
+
+#define cpu_to_scr(dw) (dw)
+#define scr_to_cpu(dw) (dw)
+
+#endif
+
+/*
+ * Access to the controller chip.
+ *
+ * If the CPU and the NCR use same endian-ness addressing,
+ * no byte reordering is needed for accessing chip io
+ * registers. Functions suffixed by '_raw' are assumed
+ * to access the chip over the PCI without doing byte
+ * reordering. Functions suffixed by '_l2b' are
+ * assumed to perform little-endian to big-endian byte
+ * reordering, those suffixed by '_b2l' blah, blah,
+ * blah, ...
+ */
+
+/*
+ * MEMORY mapped IO input / output
+ */
+
+#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
+#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
+
+#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
+
+#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
+
+#else
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
+#else
+#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
+#else
+#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
+
+#endif
+
+#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
+#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
+#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
+
+#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
+
+/*
+ * Set bit field ON, OFF
+ */
+
+#define OUTONB(r, m) OUTB(r, INB(r) | (m))
+#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
+#define OUTONW(r, m) OUTW(r, INW(r) | (m))
+#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
+#define OUTONL(r, m) OUTL(r, INL(r) | (m))
+#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
+
+/*
+ * We normally want the chip to have a consistent view
+ * of driver internal data structures when we restart it.
+ * Thus these macros.
+ */
+#define OUTL_DSP(v) \
+ do { \
+ MEMORY_BARRIER(); \
+ OUTL (nc_dsp, (v)); \
+ } while (0)
+
+#define OUTONB_STD() \
+ do { \
+ MEMORY_BARRIER(); \
+ OUTONB (nc_dcntl, (STD|NOCOM)); \
+ } while (0)
+
+
+/*
+** NCR53C8XX devices features table.
+*/
+struct ncr_chip {
+ unsigned short revision_id;
+ unsigned char burst_max; /* log-base-2 of max burst */
+ unsigned char offset_max;
+ unsigned char nr_divisor;
+ unsigned int features;
+#define FE_LED0 (1<<0)
+#define FE_WIDE (1<<1) /* Wide data transfers */
+#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
+#define FE_DBLR (1<<4) /* Clock doubler present */
+#define FE_QUAD (1<<5) /* Clock quadrupler present */
+#define FE_ERL (1<<6) /* Enable read line */
+#define FE_CLSE (1<<7) /* Cache line size enable */
+#define FE_WRIE (1<<8) /* Write & Invalidate enable */
+#define FE_ERMP (1<<9) /* Enable read multiple */
+#define FE_BOF (1<<10) /* Burst opcode fetch */
+#define FE_DFS (1<<11) /* DMA fifo size */
+#define FE_PFEN (1<<12) /* Prefetch enable */
+#define FE_LDSTR (1<<13) /* Load/Store supported */
+#define FE_RAM (1<<14) /* On chip RAM present */
+#define FE_VARCLK (1<<15) /* SCSI clock may vary */
+#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
+#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
+#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
+#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
+#define FE_LEDC (1<<20) /* Hardware control of LED */
+#define FE_DIFF (1<<21) /* Support Differential SCSI */
+#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
+#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
+#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
+#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
+#define FE_EHP (1<<27) /* 720: Even host parity */
+#define FE_MUX (1<<28) /* 720: Multiplexed bus */
+#define FE_EA (1<<29) /* 720: Enable Ack */
+
+#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
+#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
+#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
+};
+
+
+/*
+** Driver setup structure.
+**
+** This structure is initialized from linux config options.
+** It can be overridden at boot-up by the boot command line.
+*/
+#define SCSI_NCR_MAX_EXCLUDES 8
+struct ncr_driver_setup {
+ u8 master_parity;
+ u8 scsi_parity;
+ u8 disconnection;
+ u8 special_features;
+ u8 force_sync_nego;
+ u8 reverse_probe;
+ u8 pci_fix_up;
+ u8 use_nvram;
+ u8 verbose;
+ u8 default_tags;
+ u16 default_sync;
+ u16 debug;
+ u8 burst_max;
+ u8 led_pin;
+ u8 max_wide;
+ u8 settle_delay;
+ u8 diff_support;
+ u8 irqm;
+ u8 bus_check;
+ u8 optimize;
+ u8 recovery;
+ u8 host_id;
+ u16 iarb;
+ u32 excludes[SCSI_NCR_MAX_EXCLUDES];
+ char tag_ctrl[100];
+};
+
+/*
+** Initial setup.
+** Can be overriden at startup by a command line.
+*/
+#define SCSI_NCR_DRIVER_SETUP \
+{ \
+ SCSI_NCR_SETUP_MASTER_PARITY, \
+ SCSI_NCR_SETUP_SCSI_PARITY, \
+ SCSI_NCR_SETUP_DISCONNECTION, \
+ SCSI_NCR_SETUP_SPECIAL_FEATURES, \
+ SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
+ 0, \
+ 0, \
+ 1, \
+ 0, \
+ SCSI_NCR_SETUP_DEFAULT_TAGS, \
+ SCSI_NCR_SETUP_DEFAULT_SYNC, \
+ 0x00, \
+ 7, \
+ 0, \
+ 1, \
+ SCSI_NCR_SETUP_SETTLE_TIME, \
+ 0, \
+ 0, \
+ 1, \
+ 0, \
+ 0, \
+ 255, \
+ 0x00 \
+}
+
+/*
+** Boot fail safe setup.
+** Override initial setup from boot command line:
+** ncr53c8xx=safe:y
+*/
+#define SCSI_NCR_DRIVER_SAFE_SETUP \
+{ \
+ 0, \
+ 1, \
+ 0, \
+ 0, \
+ 0, \
+ 0, \
+ 0, \
+ 1, \
+ 2, \
+ 0, \
+ 255, \
+ 0x00, \
+ 255, \
+ 0, \
+ 0, \
+ 10, \
+ 1, \
+ 1, \
+ 1, \
+ 0, \
+ 0, \
+ 255 \
+}
+
+/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
+
+/*-----------------------------------------------------------------
+**
+** The ncr 53c810 register structure.
+**
+**-----------------------------------------------------------------
+*/
+
+struct ncr_reg {
+/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
+
+/*01*/ u8 nc_scntl1; /* no reset */
+ #define ISCON 0x10 /* connected to scsi */
+ #define CRST 0x08 /* force reset */
+ #define IARB 0x02 /* immediate arbitration */
+
+/*02*/ u8 nc_scntl2; /* no disconnect expected */
+ #define SDU 0x80 /* cmd: disconnect will raise error */
+ #define CHM 0x40 /* sta: chained mode */
+ #define WSS 0x08 /* sta: wide scsi send [W]*/
+ #define WSR 0x01 /* sta: wide scsi received [W]*/
+
+/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
+ #define EWS 0x08 /* cmd: enable wide scsi [W]*/
+ #define ULTRA 0x80 /* cmd: ULTRA enable */
+ /* bits 0-2, 7 rsvd for C1010 */
+
+/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
+ #define RRE 0x40 /* r/w:e enable response to resel. */
+ #define SRE 0x20 /* r/w:e enable response to select */
+
+/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
+ /* bits 6-7 rsvd for C1010 */
+
+/*06*/ u8 nc_sdid; /* ### Destination-ID */
+
+/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
+
+/*08*/ u8 nc_sfbr; /* ### First byte in phase */
+
+/*09*/ u8 nc_socl;
+ #define CREQ 0x80 /* r/w: SCSI-REQ */
+ #define CACK 0x40 /* r/w: SCSI-ACK */
+ #define CBSY 0x20 /* r/w: SCSI-BSY */
+ #define CSEL 0x10 /* r/w: SCSI-SEL */
+ #define CATN 0x08 /* r/w: SCSI-ATN */
+ #define CMSG 0x04 /* r/w: SCSI-MSG */
+ #define CC_D 0x02 /* r/w: SCSI-C_D */
+ #define CI_O 0x01 /* r/w: SCSI-I_O */
+
+/*0a*/ u8 nc_ssid;
+
+/*0b*/ u8 nc_sbcl;
+
+/*0c*/ u8 nc_dstat;
+ #define DFE 0x80 /* sta: dma fifo empty */
+ #define MDPE 0x40 /* int: master data parity error */
+ #define BF 0x20 /* int: script: bus fault */
+ #define ABRT 0x10 /* int: script: command aborted */
+ #define SSI 0x08 /* int: script: single step */
+ #define SIR 0x04 /* int: script: interrupt instruct. */
+ #define IID 0x01 /* int: script: illegal instruct. */
+
+/*0d*/ u8 nc_sstat0;
+ #define ILF 0x80 /* sta: data in SIDL register lsb */
+ #define ORF 0x40 /* sta: data in SODR register lsb */
+ #define OLF 0x20 /* sta: data in SODL register lsb */
+ #define AIP 0x10 /* sta: arbitration in progress */
+ #define LOA 0x08 /* sta: arbitration lost */
+ #define WOA 0x04 /* sta: arbitration won */
+ #define IRST 0x02 /* sta: scsi reset signal */
+ #define SDP 0x01 /* sta: scsi parity signal */
+
+/*0e*/ u8 nc_sstat1;
+ #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
+
+/*0f*/ u8 nc_sstat2;
+ #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
+ #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
+ #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
+ #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
+ #define LDSC 0x02 /* sta: disconnect & reconnect */
+
+/*10*/ u8 nc_dsa; /* --> Base page */
+/*11*/ u8 nc_dsa1;
+/*12*/ u8 nc_dsa2;
+/*13*/ u8 nc_dsa3;
+
+/*14*/ u8 nc_istat; /* --> Main Command and status */
+ #define CABRT 0x80 /* cmd: abort current operation */
+ #define SRST 0x40 /* mod: reset chip */
+ #define SIGP 0x20 /* r/w: message from host to ncr */
+ #define SEM 0x10 /* r/w: message between host + ncr */
+ #define CON 0x08 /* sta: connected to scsi */
+ #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
+ #define SIP 0x02 /* sta: scsi-interrupt */
+ #define DIP 0x01 /* sta: host/script interrupt */
+
+/*15*/ u8 nc_istat1; /* 896 and later cores only */
+ #define FLSH 0x04 /* sta: chip is flushing */
+ #define SRUN 0x02 /* sta: scripts are running */
+ #define SIRQD 0x01 /* r/w: disable INT pin */
+
+/*16*/ u8 nc_mbox0; /* 896 and later cores only */
+/*17*/ u8 nc_mbox1; /* 896 and later cores only */
+
+/*18*/ u8 nc_ctest0;
+ #define EHP 0x04 /* 720 even host parity */
+/*19*/ u8 nc_ctest1;
+
+/*1a*/ u8 nc_ctest2;
+ #define CSIGP 0x40
+ /* bits 0-2,7 rsvd for C1010 */
+
+/*1b*/ u8 nc_ctest3;
+ #define FLF 0x08 /* cmd: flush dma fifo */
+ #define CLF 0x04 /* cmd: clear dma fifo */
+ #define FM 0x02 /* mod: fetch pin mode */
+ #define WRIE 0x01 /* mod: write and invalidate enable */
+ /* bits 4-7 rsvd for C1010 */
+
+/*1c*/ u32 nc_temp; /* ### Temporary stack */
+
+/*20*/ u8 nc_dfifo;
+/*21*/ u8 nc_ctest4;
+ #define MUX 0x80 /* 720 host bus multiplex mode */
+ #define BDIS 0x80 /* mod: burst disable */
+ #define MPEE 0x08 /* mod: master parity error enable */
+
+/*22*/ u8 nc_ctest5;
+ #define DFS 0x20 /* mod: dma fifo size */
+ /* bits 0-1, 3-7 rsvd for C1010 */
+/*23*/ u8 nc_ctest6;
+
+/*24*/ u32 nc_dbc; /* ### Byte count and command */
+/*28*/ u32 nc_dnad; /* ### Next command register */
+/*2c*/ u32 nc_dsp; /* --> Script Pointer */
+/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
+
+/*34*/ u8 nc_scratcha; /* Temporary register a */
+/*35*/ u8 nc_scratcha1;
+/*36*/ u8 nc_scratcha2;
+/*37*/ u8 nc_scratcha3;
+
+/*38*/ u8 nc_dmode;
+ #define BL_2 0x80 /* mod: burst length shift value +2 */
+ #define BL_1 0x40 /* mod: burst length shift value +1 */
+ #define ERL 0x08 /* mod: enable read line */
+ #define ERMP 0x04 /* mod: enable read multiple */
+ #define BOF 0x02 /* mod: burst op code fetch */
+
+/*39*/ u8 nc_dien;
+/*3a*/ u8 nc_sbr;
+
+/*3b*/ u8 nc_dcntl; /* --> Script execution control */
+ #define CLSE 0x80 /* mod: cache line size enable */
+ #define PFF 0x40 /* cmd: pre-fetch flush */
+ #define PFEN 0x20 /* mod: pre-fetch enable */
+ #define EA 0x20 /* mod: 720 enable-ack */
+ #define SSM 0x10 /* mod: single step mode */
+ #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
+ #define STD 0x04 /* cmd: start dma mode */
+ #define IRQD 0x02 /* mod: irq disable */
+ #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
+ /* bits 0-1 rsvd for C1010 */
+
+/*3c*/ u32 nc_adder;
+
+/*40*/ u16 nc_sien; /* -->: interrupt enable */
+/*42*/ u16 nc_sist; /* <--: interrupt status */
+ #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+ #define STO 0x0400/* sta: timeout (select) */
+ #define GEN 0x0200/* sta: timeout (general) */
+ #define HTH 0x0100/* sta: timeout (handshake) */
+ #define MA 0x80 /* sta: phase mismatch */
+ #define CMP 0x40 /* sta: arbitration complete */
+ #define SEL 0x20 /* sta: selected by another device */
+ #define RSL 0x10 /* sta: reselected by another device*/
+ #define SGE 0x08 /* sta: gross error (over/underflow)*/
+ #define UDC 0x04 /* sta: unexpected disconnect */
+ #define RST 0x02 /* sta: scsi bus reset detected */
+ #define PAR 0x01 /* sta: scsi parity error */
+
+/*44*/ u8 nc_slpar;
+/*45*/ u8 nc_swide;
+/*46*/ u8 nc_macntl;
+/*47*/ u8 nc_gpcntl;
+/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
+/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
+/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
+
+/*4c*/ u8 nc_stest0;
+
+/*4d*/ u8 nc_stest1;
+ #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
+ #define DBLEN 0x08 /* clock doubler running */
+ #define DBLSEL 0x04 /* clock doubler selected */
+
+
+/*4e*/ u8 nc_stest2;
+ #define ROF 0x40 /* reset scsi offset (after gross error!) */
+ #define DIF 0x20 /* 720 SCSI differential mode */
+ #define EXT 0x02 /* extended filtering */
+
+/*4f*/ u8 nc_stest3;
+ #define TE 0x80 /* c: tolerAnt enable */
+ #define HSC 0x20 /* c: Halt SCSI Clock */
+ #define CSF 0x02 /* c: clear scsi fifo */
+
+/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
+/*52*/ u8 nc_stest4;
+ #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
+ #define SMODE_HVD 0x40 /* High Voltage Differential */
+ #define SMODE_SE 0x80 /* Single Ended */
+ #define SMODE_LVD 0xc0 /* Low Voltage Differential */
+ #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
+ /* bits 0-5 rsvd for C1010 */
+
+/*53*/ u8 nc_53_;
+/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
+/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
+ #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
+ #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
+ #define ENNDJ 0x20 /* Enable Non Data PM Jump */
+ #define DISFC 0x10 /* Disable Auto FIFO Clear */
+ #define DILS 0x02 /* Disable Internal Load/Store */
+ #define DPR 0x01 /* Disable Pipe Req */
+
+/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
+ #define ZMOD 0x80 /* High Impedance Mode */
+ #define DIC 0x10 /* Disable Internal Cycles */
+ #define DDAC 0x08 /* Disable Dual Address Cycle */
+ #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
+ #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
+ #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
+
+/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
+/*5a*/ u16 nc_5a_;
+
+/*5c*/ u8 nc_scr0; /* Working register B */
+/*5d*/ u8 nc_scr1; /* */
+/*5e*/ u8 nc_scr2; /* */
+/*5f*/ u8 nc_scr3; /* */
+
+/*60*/ u8 nc_scrx[64]; /* Working register C-R */
+/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
+/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
+/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
+/*ac*/ u32 nc_drs; /* DSA Relative Selector */
+/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
+/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
+/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
+/*bc*/ u16 nc_scntl4; /* C1010 only */
+ #define U3EN 0x80 /* Enable Ultra 3 */
+ #define AIPEN 0x40 /* Allow check upper byte lanes */
+ #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
+ transfer edge */
+ #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
+ transfer edge */
+
+/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
+/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
+
+/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
+/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
+/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
+/*c9*/ u8 nc_rbc1; /* */
+/*ca*/ u8 nc_rbc2; /* */
+/*cb*/ u8 nc_rbc3; /* */
+
+/*cc*/ u8 nc_ua; /* Updated Address */
+/*cd*/ u8 nc_ua1; /* */
+/*ce*/ u8 nc_ua2; /* */
+/*cf*/ u8 nc_ua3; /* */
+/*d0*/ u32 nc_esa; /* Entry Storage Address */
+/*d4*/ u8 nc_ia; /* Instruction Address */
+/*d5*/ u8 nc_ia1;
+/*d6*/ u8 nc_ia2;
+/*d7*/ u8 nc_ia3;
+/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
+/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
+
+ /* Following for C1010 only */
+/*e0*/ u16 nc_crcpad; /* CRC Value */
+/*e2*/ u8 nc_crccntl0; /* CRC control register */
+ #define SNDCRC 0x10 /* Send CRC Request */
+/*e3*/ u8 nc_crccntl1; /* CRC control register */
+/*e4*/ u32 nc_crcdata; /* CRC data register */
+/*e8*/ u32 nc_e8_; /* rsvd */
+/*ec*/ u32 nc_ec_; /* rsvd */
+/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
+
+};
+
+/*-----------------------------------------------------------
+**
+** Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
+#define REG(r) REGJ (nc_, r)
+
+typedef u32 ncrcmd;
+
+/*-----------------------------------------------------------
+**
+** SCSI phases
+**
+** DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_DATA_OUT 0x00000000
+#define SCR_DATA_IN 0x01000000
+#define SCR_COMMAND 0x02000000
+#define SCR_STATUS 0x03000000
+#define SCR_DT_DATA_OUT 0x04000000
+#define SCR_DT_DATA_IN 0x05000000
+#define SCR_MSG_OUT 0x06000000
+#define SCR_MSG_IN 0x07000000
+
+#define SCR_ILG_OUT 0x04000000
+#define SCR_ILG_IN 0x05000000
+
+/*-----------------------------------------------------------
+**
+** Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+** MOVE_ABS (LEN)
+** <<start address>>
+**
+** MOVE_IND (LEN)
+** <<dnad_offset>>
+**
+** MOVE_TBL
+** <<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE 0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL (0x10000000)
+
+struct scr_tblmove {
+ u32 size;
+ u32 addr;
+};
+
+/*-----------------------------------------------------------
+**
+** Selection
+**
+**-----------------------------------------------------------
+**
+** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
+** <<alternate_address>>
+**
+** SEL_TBL | << dnad_offset>> [ | REL_JMP]
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SEL_ABS 0x40000000
+#define SCR_SEL_ABS_ATN 0x41000000
+#define SCR_SEL_TBL 0x42000000
+#define SCR_SEL_TBL_ATN 0x43000000
+
+
+#ifdef SCSI_NCR_BIG_ENDIAN
+struct scr_tblsel {
+ u8 sel_scntl3;
+ u8 sel_id;
+ u8 sel_sxfer;
+ u8 sel_scntl4;
+};
+#else
+struct scr_tblsel {
+ u8 sel_scntl4;
+ u8 sel_sxfer;
+ u8 sel_id;
+ u8 sel_scntl3;
+};
+#endif
+
+#define SCR_JMP_REL 0x04000000
+#define SCR_ID(id) (((u32)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** WAIT_DISC
+** dummy: <<alternate_address>>
+**
+** WAIT_RESEL
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_WAIT_DISC 0x48000000
+#define SCR_WAIT_RESEL 0x50000000
+
+/*-----------------------------------------------------------
+**
+** Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+** SET (flags {|.. })
+**
+** CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f) (0x58000000 | (f))
+#define SCR_CLR(f) (0x60000000 | (f))
+
+#define SCR_CARRY 0x00000400
+#define SCR_TRG 0x00000200
+#define SCR_ACK 0x00000040
+#define SCR_ATN 0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Memory to memory move
+**
+**-----------------------------------------------------------
+**
+** COPY (bytecount)
+** << source_address >>
+** << destination_address >>
+**
+** SCR_COPY sets the NO FLUSH option by default.
+** SCR_COPY_F does not set this option.
+**
+** For chips which do not support this option,
+** ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+** Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+** SFBR_REG (reg, op, data) reg = SFBR op data
+** << 0 >>
+**
+** REG_SFBR (reg, op, data) SFBR = reg op data
+** << 0 >>
+**
+** REG_REG (reg, op, data) reg = reg op data
+** << 0 >>
+**
+**-----------------------------------------------------------
+** On 810A, 860, 825A, 875, 895 and 896 chips the content
+** of SFBR register can be used as data (SCR_SFBR_DATA).
+** The 896 has additionnal IO registers starting at
+** offset 0x80. Bit 7 of register offset is stored in
+** bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
+
+#define SCR_SFBR_REG(reg,op,data) \
+ (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+ (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+ (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define SCR_LOAD 0x00000000
+#define SCR_SHL 0x01000000
+#define SCR_OR 0x02000000
+#define SCR_XOR 0x03000000
+#define SCR_AND 0x04000000
+#define SCR_SHR 0x05000000
+#define SCR_ADD 0x06000000
+#define SCR_ADDC 0x07000000
+
+#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+** FROM_REG (reg) SFBR = reg
+** << 0 >>
+**
+** TO_REG (reg) reg = SFBR
+** << 0 >>
+**
+** LOAD_REG (reg, data) reg = <data>
+** << 0 >>
+**
+** LOAD_SFBR(data) SFBR = <data>
+** << 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_FROM_REG(reg) \
+ SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define SCR_TO_REG(reg) \
+ SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define SCR_LOAD_REG(reg,data) \
+ SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+ (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+** LOAD from memory to register.
+** STORE from register to memory.
+**
+** Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+** LOAD_ABS (LEN)
+** <<start address>>
+**
+** LOAD_REL (LEN) (DSA relative)
+** <<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2 0x02000000
+#define SCR_DSA_REL2 0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+ (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+ (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** CALL [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
+** <<dummy>>
+**
+** INT [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** Conditions:
+** WHEN (phase)
+** IF (phase)
+** CARRYSET
+** DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP 0x80000000
+#define SCR_JUMP 0x80080000
+#define SCR_JUMP64 0x80480000
+#define SCR_JUMPR 0x80880000
+#define SCR_CALL 0x88080000
+#define SCR_CALLR 0x88880000
+#define SCR_RETURN 0x90080000
+#define SCR_INT 0x98080000
+#define SCR_INT_FLY 0x98180000
+
+#define IFFALSE(arg) (0x00080000 | (arg))
+#define IFTRUE(arg) (0x00000000 | (arg))
+
+#define WHEN(phase) (0x00030000 | (phase))
+#define IF(phase) (0x00020000 | (phase))
+
+#define DATA(D) (0x00040000 | ((D) & 0xff))
+#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET (0x00200000)
+
+/*-----------------------------------------------------------
+**
+** SCSI constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+** Messages
+*/
+
+#define M_COMPLETE COMMAND_COMPLETE
+#define M_EXTENDED EXTENDED_MESSAGE
+#define M_SAVE_DP SAVE_POINTERS
+#define M_RESTORE_DP RESTORE_POINTERS
+#define M_DISCONNECT DISCONNECT
+#define M_ID_ERROR INITIATOR_ERROR
+#define M_ABORT ABORT_TASK_SET
+#define M_REJECT MESSAGE_REJECT
+#define M_NOOP NOP
+#define M_PARITY MSG_PARITY_ERROR
+#define M_LCOMPLETE LINKED_CMD_COMPLETE
+#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE
+#define M_RESET TARGET_RESET
+#define M_ABORT_TAG ABORT_TASK
+#define M_CLEAR_QUEUE CLEAR_TASK_SET
+#define M_INIT_REC INITIATE_RECOVERY
+#define M_REL_REC RELEASE_RECOVERY
+#define M_TERMINATE (0x11)
+#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG
+#define M_HEAD_TAG HEAD_OF_QUEUE_TAG
+#define M_ORDERED_TAG ORDERED_QUEUE_TAG
+#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE
+#define M_IDENTIFY (0x80)
+
+#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER
+#define M_X_SYNC_REQ EXTENDED_SDTR
+#define M_X_WIDE_REQ EXTENDED_WDTR
+#define M_X_PPR_REQ EXTENDED_PPR
+
+/*
+** Status
+*/
+
+#define S_GOOD (0x00)
+#define S_CHECK_COND (0x02)
+#define S_COND_MET (0x04)
+#define S_BUSY (0x08)
+#define S_INT (0x10)
+#define S_INT_COND_MET (0x14)
+#define S_CONFLICT (0x18)
+#define S_TERMINATED (0x20)
+#define S_QUEUE_FULL (0x28)
+#define S_ILLEGAL (0xff)
+#define S_SENSE (0x80)
+
+/*
+ * End of ncrreg from FreeBSD
+ */
/*
Build a scatter/gather entry.
diff --git a/drivers/scsi/sym53c8xx_comm.h b/drivers/scsi/sym53c8xx_comm.h
deleted file mode 100644
index 20ae2b1..0000000
--- a/drivers/scsi/sym53c8xx_comm.h
+++ /dev/null
@@ -1,792 +0,0 @@
-/******************************************************************************
-** High Performance device driver for the Symbios 53C896 controller.
-**
-** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
-**
-** This driver also supports all the Symbios 53C8XX controller family,
-** except 53C810 revisions < 16, 53C825 revisions < 16 and all
-** revisions of 53C815 controllers.
-**
-** This driver is based on the Linux port of the FreeBSD ncr driver.
-**
-** Copyright (C) 1994 Wolfgang Stanglmeier
-**
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-** The Linux port of the FreeBSD ncr driver has been achieved in
-** november 1995 by:
-**
-** Gerard Roudier <groudier@free.fr>
-**
-** Being given that this driver originates from the FreeBSD version, and
-** in order to keep synergy on both, any suggested enhancements and corrections
-** received on Linux are automatically a potential candidate for the FreeBSD
-** version.
-**
-** The original driver has been written for 386bsd and FreeBSD by
-** Wolfgang Stanglmeier <wolf@cologne.de>
-** Stefan Esser <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-** Major contributions:
-** --------------------
-**
-** NVRAM detection and reading.
-** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-*******************************************************************************
-*/
-
-/*==========================================================
-**
-** Debugging tags
-**
-**==========================================================
-*/
-
-#define DEBUG_ALLOC (0x0001)
-#define DEBUG_PHASE (0x0002)
-#define DEBUG_QUEUE (0x0008)
-#define DEBUG_RESULT (0x0010)
-#define DEBUG_POINTER (0x0020)
-#define DEBUG_SCRIPT (0x0040)
-#define DEBUG_TINY (0x0080)
-#define DEBUG_TIMING (0x0100)
-#define DEBUG_NEGO (0x0200)
-#define DEBUG_TAGS (0x0400)
-#define DEBUG_SCATTER (0x0800)
-#define DEBUG_IC (0x1000)
-
-/*
-** Enable/Disable debug messages.
-** Can be changed at runtime too.
-*/
-
-#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
-static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
- #define DEBUG_FLAGS ncr_debug
-#else
- #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS
-#endif
-
-static inline struct list_head *ncr_list_pop(struct list_head *head)
-{
- if (!list_empty(head)) {
- struct list_head *elem = head->next;
-
- list_del(elem);
- return elem;
- }
-
- return NULL;
-}
-
-#ifdef __sparc__
-#include <asm/irq.h>
-#endif
-
-/*==========================================================
-**
-** Simple power of two buddy-like allocator.
-**
-** This simple code is not intended to be fast, but to
-** provide power of 2 aligned memory allocations.
-** Since the SCRIPTS processor only supplies 8 bit
-** arithmetic, this allocator allows simple and fast
-** address calculations from the SCRIPTS code.
-** In addition, cache line alignment is guaranteed for
-** power of 2 cache line size.
-** Enhanced in linux-2.3.44 to provide a memory pool
-** per pcidev to support dynamic dma mapping. (I would
-** have preferred a real bus astraction, btw).
-**
-**==========================================================
-*/
-
-#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */
-#if PAGE_SIZE >= 8192
-#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */
-#else
-#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */
-#endif
-#define MEMO_FREE_UNUSED /* Free unused pages immediately */
-#define MEMO_WARN 1
-#define MEMO_GFP_FLAGS GFP_ATOMIC
-#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER)
-#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT)
-#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1)
-
-typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */
-typedef struct device *m_bush_t; /* Something that addresses DMAable */
-
-typedef struct m_link { /* Link between free memory chunks */
- struct m_link *next;
-} m_link_s;
-
-typedef struct m_vtob { /* Virtual to Bus address translation */
- struct m_vtob *next;
- m_addr_t vaddr;
- m_addr_t baddr;
-} m_vtob_s;
-#define VTOB_HASH_SHIFT 5
-#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT)
-#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1)
-#define VTOB_HASH_CODE(m) \
- ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
-
-typedef struct m_pool { /* Memory pool of a given kind */
- m_bush_t bush;
- m_addr_t (*getp)(struct m_pool *);
- void (*freep)(struct m_pool *, m_addr_t);
- int nump;
- m_vtob_s *(vtob[VTOB_HASH_SIZE]);
- struct m_pool *next;
- struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
-} m_pool_s;
-
-static void *___m_alloc(m_pool_s *mp, int size)
-{
- int i = 0;
- int s = (1 << MEMO_SHIFT);
- int j;
- m_addr_t a;
- m_link_s *h = mp->h;
-
- if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
- return NULL;
-
- while (size > s) {
- s <<= 1;
- ++i;
- }
-
- j = i;
- while (!h[j].next) {
- if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
- h[j].next = (m_link_s *)mp->getp(mp);
- if (h[j].next)
- h[j].next->next = NULL;
- break;
- }
- ++j;
- s <<= 1;
- }
- a = (m_addr_t) h[j].next;
- if (a) {
- h[j].next = h[j].next->next;
- while (j > i) {
- j -= 1;
- s >>= 1;
- h[j].next = (m_link_s *) (a+s);
- h[j].next->next = NULL;
- }
- }
-#ifdef DEBUG
- printk("___m_alloc(%d) = %p\n", size, (void *) a);
-#endif
- return (void *) a;
-}
-
-static void ___m_free(m_pool_s *mp, void *ptr, int size)
-{
- int i = 0;
- int s = (1 << MEMO_SHIFT);
- m_link_s *q;
- m_addr_t a, b;
- m_link_s *h = mp->h;
-
-#ifdef DEBUG
- printk("___m_free(%p, %d)\n", ptr, size);
-#endif
-
- if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
- return;
-
- while (size > s) {
- s <<= 1;
- ++i;
- }
-
- a = (m_addr_t) ptr;
-
- while (1) {
-#ifdef MEMO_FREE_UNUSED
- if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
- mp->freep(mp, a);
- break;
- }
-#endif
- b = a ^ s;
- q = &h[i];
- while (q->next && q->next != (m_link_s *) b) {
- q = q->next;
- }
- if (!q->next) {
- ((m_link_s *) a)->next = h[i].next;
- h[i].next = (m_link_s *) a;
- break;
- }
- q->next = q->next->next;
- a = a & b;
- s <<= 1;
- ++i;
- }
-}
-
-static DEFINE_SPINLOCK(ncr53c8xx_lock);
-
-static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
-{
- void *p;
-
- p = ___m_alloc(mp, size);
-
- if (DEBUG_FLAGS & DEBUG_ALLOC)
- printk ("new %-10s[%4d] @%p.\n", name, size, p);
-
- if (p)
- memset(p, 0, size);
- else if (uflags & MEMO_WARN)
- printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
-
- return p;
-}
-
-#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN)
-
-static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
-{
- if (DEBUG_FLAGS & DEBUG_ALLOC)
- printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
-
- ___m_free(mp, ptr, size);
-
-}
-
-/*
- * With pci bus iommu support, we use a default pool of unmapped memory
- * for memory we donnot need to DMA from/to and one pool per pcidev for
- * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
- */
-
-static m_addr_t ___mp0_getp(m_pool_s *mp)
-{
- m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
- if (m)
- ++mp->nump;
- return m;
-}
-
-static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
-{
- free_pages(m, MEMO_PAGE_ORDER);
- --mp->nump;
-}
-
-static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
-
-/*
- * DMAable pools.
- */
-
-/*
- * With pci bus iommu support, we maintain one pool per pcidev and a
- * hashed reverse table for virtual to bus physical address translations.
- */
-static m_addr_t ___dma_getp(m_pool_s *mp)
-{
- m_addr_t vp;
- m_vtob_s *vbp;
-
- vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
- if (vbp) {
- dma_addr_t daddr;
- vp = (m_addr_t) dma_alloc_coherent(mp->bush,
- PAGE_SIZE<<MEMO_PAGE_ORDER,
- &daddr, GFP_ATOMIC);
- if (vp) {
- int hc = VTOB_HASH_CODE(vp);
- vbp->vaddr = vp;
- vbp->baddr = daddr;
- vbp->next = mp->vtob[hc];
- mp->vtob[hc] = vbp;
- ++mp->nump;
- return vp;
- }
- }
- if (vbp)
- __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
- return 0;
-}
-
-static void ___dma_freep(m_pool_s *mp, m_addr_t m)
-{
- m_vtob_s **vbpp, *vbp;
- int hc = VTOB_HASH_CODE(m);
-
- vbpp = &mp->vtob[hc];
- while (*vbpp && (*vbpp)->vaddr != m)
- vbpp = &(*vbpp)->next;
- if (*vbpp) {
- vbp = *vbpp;
- *vbpp = (*vbpp)->next;
- dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
- (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
- __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
- --mp->nump;
- }
-}
-
-static inline m_pool_s *___get_dma_pool(m_bush_t bush)
-{
- m_pool_s *mp;
- for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
- return mp;
-}
-
-static m_pool_s *___cre_dma_pool(m_bush_t bush)
-{
- m_pool_s *mp;
- mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
- if (mp) {
- memset(mp, 0, sizeof(*mp));
- mp->bush = bush;
- mp->getp = ___dma_getp;
- mp->freep = ___dma_freep;
- mp->next = mp0.next;
- mp0.next = mp;
- }
- return mp;
-}
-
-static void ___del_dma_pool(m_pool_s *p)
-{
- struct m_pool **pp = &mp0.next;
-
- while (*pp && *pp != p)
- pp = &(*pp)->next;
- if (*pp) {
- *pp = (*pp)->next;
- __m_free(&mp0, p, sizeof(*p), "MPOOL");
- }
-}
-
-static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
-{
- u_long flags;
- struct m_pool *mp;
- void *m = NULL;
-
- spin_lock_irqsave(&ncr53c8xx_lock, flags);
- mp = ___get_dma_pool(bush);
- if (!mp)
- mp = ___cre_dma_pool(bush);
- if (mp)
- m = __m_calloc(mp, size, name);
- if (mp && !mp->nump)
- ___del_dma_pool(mp);
- spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-
- return m;
-}
-
-static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
-{
- u_long flags;
- struct m_pool *mp;
-
- spin_lock_irqsave(&ncr53c8xx_lock, flags);
- mp = ___get_dma_pool(bush);
- if (mp)
- __m_free(mp, m, size, name);
- if (mp && !mp->nump)
- ___del_dma_pool(mp);
- spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-}
-
-static m_addr_t __vtobus(m_bush_t bush, void *m)
-{
- u_long flags;
- m_pool_s *mp;
- int hc = VTOB_HASH_CODE(m);
- m_vtob_s *vp = NULL;
- m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
-
- spin_lock_irqsave(&ncr53c8xx_lock, flags);
- mp = ___get_dma_pool(bush);
- if (mp) {
- vp = mp->vtob[hc];
- while (vp && (m_addr_t) vp->vaddr != a)
- vp = vp->next;
- }
- spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
- return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
-}
-
-#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n)
-#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n)
-#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n)
-#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n)
-#define _vtobus(np, p) __vtobus(np->dev, p)
-#define vtobus(p) _vtobus(np, p)
-
-/*
- * Deal with DMA mapping/unmapping.
- */
-
-/* To keep track of the dma mapping (sg/single) that has been set */
-#define __data_mapped SCp.phase
-#define __data_mapping SCp.have_data_in
-
-static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
-{
- switch(cmd->__data_mapped) {
- case 2:
- dma_unmap_sg(dev, cmd->buffer, cmd->use_sg,
- cmd->sc_data_direction);
- break;
- case 1:
- dma_unmap_single(dev, cmd->__data_mapping,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- break;
- }
- cmd->__data_mapped = 0;
-}
-
-static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
-{
- dma_addr_t mapping;
-
- if (cmd->request_bufflen == 0)
- return 0;
-
- mapping = dma_map_single(dev, cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- cmd->__data_mapped = 1;
- cmd->__data_mapping = mapping;
-
- return mapping;
-}
-
-static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
-{
- int use_sg;
-
- if (cmd->use_sg == 0)
- return 0;
-
- use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg,
- cmd->sc_data_direction);
- cmd->__data_mapped = 2;
- cmd->__data_mapping = use_sg;
-
- return use_sg;
-}
-
-#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd)
-#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd)
-#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd)
-
-/*==========================================================
-**
-** Driver setup.
-**
-** This structure is initialized from linux config
-** options. It can be overridden at boot-up by the boot
-** command line.
-**
-**==========================================================
-*/
-static struct ncr_driver_setup
- driver_setup = SCSI_NCR_DRIVER_SETUP;
-
-#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-static struct ncr_driver_setup
- driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP;
-#endif
-
-#define initverbose (driver_setup.verbose)
-#define bootverbose (np->verbose)
-
-
-/*===================================================================
-**
-** Driver setup from the boot command line
-**
-**===================================================================
-*/
-
-#ifdef MODULE
-#define ARG_SEP ' '
-#else
-#define ARG_SEP ','
-#endif
-
-#define OPT_TAGS 1
-#define OPT_MASTER_PARITY 2
-#define OPT_SCSI_PARITY 3
-#define OPT_DISCONNECTION 4
-#define OPT_SPECIAL_FEATURES 5
-#define OPT_UNUSED_1 6
-#define OPT_FORCE_SYNC_NEGO 7
-#define OPT_REVERSE_PROBE 8
-#define OPT_DEFAULT_SYNC 9
-#define OPT_VERBOSE 10
-#define OPT_DEBUG 11
-#define OPT_BURST_MAX 12
-#define OPT_LED_PIN 13
-#define OPT_MAX_WIDE 14
-#define OPT_SETTLE_DELAY 15
-#define OPT_DIFF_SUPPORT 16
-#define OPT_IRQM 17
-#define OPT_PCI_FIX_UP 18
-#define OPT_BUS_CHECK 19
-#define OPT_OPTIMIZE 20
-#define OPT_RECOVERY 21
-#define OPT_SAFE_SETUP 22
-#define OPT_USE_NVRAM 23
-#define OPT_EXCLUDE 24
-#define OPT_HOST_ID 25
-
-#ifdef SCSI_NCR_IARB_SUPPORT
-#define OPT_IARB 26
-#endif
-
-static char setup_token[] __initdata =
- "tags:" "mpar:"
- "spar:" "disc:"
- "specf:" "ultra:"
- "fsn:" "revprob:"
- "sync:" "verb:"
- "debug:" "burst:"
- "led:" "wide:"
- "settle:" "diff:"
- "irqm:" "pcifix:"
- "buschk:" "optim:"
- "recovery:"
- "safe:" "nvram:"
- "excl:" "hostid:"
-#ifdef SCSI_NCR_IARB_SUPPORT
- "iarb:"
-#endif
- ; /* DONNOT REMOVE THIS ';' */
-
-#ifdef MODULE
-#define ARG_SEP ' '
-#else
-#define ARG_SEP ','
-#endif
-
-static int __init get_setup_token(char *p)
-{
- char *cur = setup_token;
- char *pc;
- int i = 0;
-
- while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
- ++pc;
- ++i;
- if (!strncmp(p, cur, pc - cur))
- return i;
- cur = pc;
- }
- return 0;
-}
-
-
-static int __init sym53c8xx__setup(char *str)
-{
-#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
- char *cur = str;
- char *pc, *pv;
- int i, val, c;
- int xi = 0;
-
- while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
- char *pe;
-
- val = 0;
- pv = pc;
- c = *++pv;
-
- if (c == 'n')
- val = 0;
- else if (c == 'y')
- val = 1;
- else
- val = (int) simple_strtoul(pv, &pe, 0);
-
- switch (get_setup_token(cur)) {
- case OPT_TAGS:
- driver_setup.default_tags = val;
- if (pe && *pe == '/') {
- i = 0;
- while (*pe && *pe != ARG_SEP &&
- i < sizeof(driver_setup.tag_ctrl)-1) {
- driver_setup.tag_ctrl[i++] = *pe++;
- }
- driver_setup.tag_ctrl[i] = '\0';
- }
- break;
- case OPT_MASTER_PARITY:
- driver_setup.master_parity = val;
- break;
- case OPT_SCSI_PARITY:
- driver_setup.scsi_parity = val;
- break;
- case OPT_DISCONNECTION:
- driver_setup.disconnection = val;
- break;
- case OPT_SPECIAL_FEATURES:
- driver_setup.special_features = val;
- break;
- case OPT_FORCE_SYNC_NEGO:
- driver_setup.force_sync_nego = val;
- break;
- case OPT_REVERSE_PROBE:
- driver_setup.reverse_probe = val;
- break;
- case OPT_DEFAULT_SYNC:
- driver_setup.default_sync = val;
- break;
- case OPT_VERBOSE:
- driver_setup.verbose = val;
- break;
- case OPT_DEBUG:
- driver_setup.debug = val;
- break;
- case OPT_BURST_MAX:
- driver_setup.burst_max = val;
- break;
- case OPT_LED_PIN:
- driver_setup.led_pin = val;
- break;
- case OPT_MAX_WIDE:
- driver_setup.max_wide = val? 1:0;
- break;
- case OPT_SETTLE_DELAY:
- driver_setup.settle_delay = val;
- break;
- case OPT_DIFF_SUPPORT:
- driver_setup.diff_support = val;
- break;
- case OPT_IRQM:
- driver_setup.irqm = val;
- break;
- case OPT_PCI_FIX_UP:
- driver_setup.pci_fix_up = val;
- break;
- case OPT_BUS_CHECK:
- driver_setup.bus_check = val;
- break;
- case OPT_OPTIMIZE:
- driver_setup.optimize = val;
- break;
- case OPT_RECOVERY:
- driver_setup.recovery = val;
- break;
- case OPT_USE_NVRAM:
- driver_setup.use_nvram = val;
- break;
- case OPT_SAFE_SETUP:
- memcpy(&driver_setup, &driver_safe_setup,
- sizeof(driver_setup));
- break;
- case OPT_EXCLUDE:
- if (xi < SCSI_NCR_MAX_EXCLUDES)
- driver_setup.excludes[xi++] = val;
- break;
- case OPT_HOST_ID:
- driver_setup.host_id = val;
- break;
-#ifdef SCSI_NCR_IARB_SUPPORT
- case OPT_IARB:
- driver_setup.iarb = val;
- break;
-#endif
- default:
- printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
- break;
- }
-
- if ((cur = strchr(cur, ARG_SEP)) != NULL)
- ++cur;
- }
-#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
- return 1;
-}
-
-/*===================================================================
-**
-** Get device queue depth from boot command line.
-**
-**===================================================================
-*/
-#define DEF_DEPTH (driver_setup.default_tags)
-#define ALL_TARGETS -2
-#define NO_TARGET -1
-#define ALL_LUNS -2
-#define NO_LUN -1
-
-static int device_queue_depth(int unit, int target, int lun)
-{
- int c, h, t, u, v;
- char *p = driver_setup.tag_ctrl;
- char *ep;
-
- h = -1;
- t = NO_TARGET;
- u = NO_LUN;
- while ((c = *p++) != 0) {
- v = simple_strtoul(p, &ep, 0);
- switch(c) {
- case '/':
- ++h;
- t = ALL_TARGETS;
- u = ALL_LUNS;
- break;
- case 't':
- if (t != target)
- t = (target == v) ? v : NO_TARGET;
- u = ALL_LUNS;
- break;
- case 'u':
- if (u != lun)
- u = (lun == v) ? v : NO_LUN;
- break;
- case 'q':
- if (h == unit &&
- (t == ALL_TARGETS || t == target) &&
- (u == ALL_LUNS || u == lun))
- return v;
- break;
- case '-':
- t = ALL_TARGETS;
- u = ALL_LUNS;
- break;
- default:
- break;
- }
- p = ep;
- }
- return DEF_DEPTH;
-}
diff --git a/drivers/scsi/sym53c8xx_defs.h b/drivers/scsi/sym53c8xx_defs.h
deleted file mode 100644
index 139cd0e..0000000
--- a/drivers/scsi/sym53c8xx_defs.h
+++ /dev/null
@@ -1,1320 +0,0 @@
-/******************************************************************************
-** High Performance device driver for the Symbios 53C896 controller.
-**
-** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
-**
-** This driver also supports all the Symbios 53C8XX controller family,
-** except 53C810 revisions < 16, 53C825 revisions < 16 and all
-** revisions of 53C815 controllers.
-**
-** This driver is based on the Linux port of the FreeBSD ncr driver.
-**
-** Copyright (C) 1994 Wolfgang Stanglmeier
-**
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-** The Linux port of the FreeBSD ncr driver has been achieved in
-** november 1995 by:
-**
-** Gerard Roudier <groudier@free.fr>
-**
-** Being given that this driver originates from the FreeBSD version, and
-** in order to keep synergy on both, any suggested enhancements and corrections
-** received on Linux are automatically a potential candidate for the FreeBSD
-** version.
-**
-** The original driver has been written for 386bsd and FreeBSD by
-** Wolfgang Stanglmeier <wolf@cologne.de>
-** Stefan Esser <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-** Major contributions:
-** --------------------
-**
-** NVRAM detection and reading.
-** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-** Added support for MIPS big endian systems.
-** Carsten Langgaard, carstenl@mips.com
-** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-**
-** Added support for HP PARISC big endian systems.
-** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-**
-*******************************************************************************
-*/
-
-#ifndef SYM53C8XX_DEFS_H
-#define SYM53C8XX_DEFS_H
-
-#include <linux/config.h>
-
-/*
-** If you want a driver as small as possible, donnot define the
-** following options.
-*/
-#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-#define SCSI_NCR_DEBUG_INFO_SUPPORT
-
-/*
-** To disable integrity checking, do not define the
-** following option.
-*/
-#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
-# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
-#endif
-
-/* ---------------------------------------------------------------------
-** Take into account kernel configured parameters.
-** Most of these options can be overridden at startup by a command line.
-** ---------------------------------------------------------------------
-*/
-
-/*
- * For Ultra2 and Ultra3 SCSI support option, use special features.
- *
- * Value (default) means:
- * bit 0 : all features enabled, except:
- * bit 1 : PCI Write And Invalidate.
- * bit 2 : Data Phase Mismatch handling from SCRIPTS.
- *
- * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
- * enabled by the driver.
- */
-#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
-
-#define SCSI_NCR_MAX_SYNC (80)
-
-/*
- * Allow tags from 2 to 256, default 8
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
-#define SCSI_NCR_MAX_TAGS (2)
-#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
-#define SCSI_NCR_MAX_TAGS (256)
-#else
-#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#endif
-#else
-#define SCSI_NCR_MAX_TAGS (8)
-#endif
-
-/*
- * Allow tagged command queuing support if configured with default number
- * of tags set to max (see above).
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
-#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
-#else
-#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
-#endif
-
-/*
- * Immediate arbitration
- */
-#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
-#define SCSI_NCR_IARB_SUPPORT
-#endif
-
-/*
- * Sync transfer frequency at startup.
- * Allow from 5Mhz to 80Mhz default 20 Mhz.
- */
-#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
-#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
-#undef CONFIG_SCSI_NCR53C8XX_SYNC
-#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
-#endif
-
-#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
-#else
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
-#endif
-
-/*
- * Disallow disconnections at boot-up
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
-#define SCSI_NCR_SETUP_DISCONNECTION (0)
-#else
-#define SCSI_NCR_SETUP_DISCONNECTION (1)
-#endif
-
-/*
- * Force synchronous negotiation for all targets
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
-#else
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
-#endif
-
-/*
- * Disable master parity checking (flawed hardwares need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
-#define SCSI_NCR_SETUP_MASTER_PARITY (0)
-#else
-#define SCSI_NCR_SETUP_MASTER_PARITY (1)
-#endif
-
-/*
- * Disable scsi parity checking (flawed devices may need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
-#define SCSI_NCR_SETUP_SCSI_PARITY (0)
-#else
-#define SCSI_NCR_SETUP_SCSI_PARITY (1)
-#endif
-
-/*
- * Settle time after reset at boot-up
- */
-#define SCSI_NCR_SETUP_SETTLE_TIME (2)
-
-/*
-** Bridge quirks work-around option defaulted to 1.
-*/
-#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
-#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
-#endif
-
-/*
-** Work-around common bridge misbehaviour.
-**
-** - Do not flush posted writes in the opposite
-** direction on read.
-** - May reorder DMA writes to memory.
-**
-** This option should not affect performances
-** significantly, so it is the default.
-*/
-#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
-#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-
-/*
-** Same as option 1, but also deal with
-** misconfigured interrupts.
-**
-** - Edge triggerred instead of level sensitive.
-** - No interrupt line connected.
-** - IRQ number misconfigured.
-**
-** If no interrupt is delivered, the driver will
-** catch the interrupt conditions 10 times per
-** second. No need to say that this option is
-** not recommended.
-*/
-#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
-#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-#define SCSI_NCR_PCIQ_BROKEN_INTR
-
-/*
-** Some bridge designers decided to flush
-** everything prior to deliver the interrupt.
-** This option tries to deal with such a
-** behaviour.
-*/
-#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
-#define SCSI_NCR_PCIQ_SYNC_ON_INTR
-#endif
-
-/*
-** Other parameters not configurable with "make config"
-** Avoid to change these constants, unless you know what you are doing.
-*/
-
-#define SCSI_NCR_ALWAYS_SIMPLE_TAG
-#define SCSI_NCR_MAX_SCATTER (127)
-#define SCSI_NCR_MAX_TARGET (16)
-
-/*
-** Compute some desirable value for CAN_QUEUE
-** and CMD_PER_LUN.
-** The driver will use lower values if these
-** ones appear to be too large.
-*/
-#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
-#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
-
-#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
-#define SCSI_NCR_TIMER_INTERVAL (HZ)
-
-#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
-#define SCSI_NCR_MAX_LUN (16)
-#else
-#define SCSI_NCR_MAX_LUN (1)
-#endif
-
-/*
- * IO functions definition for big/little endian CPU support.
- * For now, the NCR is only supported in little endian addressing mode,
- */
-
-#ifdef __BIG_ENDIAN
-
-#define inw_l2b inw
-#define inl_l2b inl
-#define outw_b2l outw
-#define outl_b2l outl
-
-#define readb_raw readb
-#define writeb_raw writeb
-
-#if defined(SCSI_NCR_BIG_ENDIAN)
-#define readw_l2b __raw_readw
-#define readl_l2b __raw_readl
-#define writew_b2l __raw_writew
-#define writel_b2l __raw_writel
-#define readw_raw __raw_readw
-#define readl_raw __raw_readl
-#define writew_raw __raw_writew
-#define writel_raw __raw_writel
-#else /* Other big-endian */
-#define readw_l2b readw
-#define readl_l2b readl
-#define writew_b2l writew
-#define writel_b2l writel
-#define readw_raw readw
-#define readl_raw readl
-#define writew_raw writew
-#define writel_raw writel
-#endif
-
-#else /* little endian */
-
-#define inw_raw inw
-#define inl_raw inl
-#define outw_raw outw
-#define outl_raw outl
-
-#define readb_raw readb
-#define readw_raw readw
-#define readl_raw readl
-#define writeb_raw writeb
-#define writew_raw writew
-#define writel_raw writel
-
-#endif
-
-#if !defined(__hppa__) && !defined(__mips__)
-#ifdef SCSI_NCR_BIG_ENDIAN
-#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
-#endif
-#endif
-
-#define MEMORY_BARRIER() mb()
-
-
-/*
- * If the NCR uses big endian addressing mode over the
- * PCI, actual io register addresses for byte and word
- * accesses must be changed according to lane routing.
- * Btw, ncr_offb() and ncr_offw() macros only apply to
- * constants and so donnot generate bloated code.
- */
-
-#if defined(SCSI_NCR_BIG_ENDIAN)
-
-#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
-#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
-
-#else
-
-#define ncr_offb(o) (o)
-#define ncr_offw(o) (o)
-
-#endif
-
-/*
- * If the CPU and the NCR use same endian-ness addressing,
- * no byte reordering is needed for script patching.
- * Macro cpu_to_scr() is to be used for script patching.
- * Macro scr_to_cpu() is to be used for getting a DWORD
- * from the script.
- */
-
-#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw) cpu_to_le32(dw)
-#define scr_to_cpu(dw) le32_to_cpu(dw)
-
-#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw) cpu_to_be32(dw)
-#define scr_to_cpu(dw) be32_to_cpu(dw)
-
-#else
-
-#define cpu_to_scr(dw) (dw)
-#define scr_to_cpu(dw) (dw)
-
-#endif
-
-/*
- * Access to the controller chip.
- *
- * If the CPU and the NCR use same endian-ness addressing,
- * no byte reordering is needed for accessing chip io
- * registers. Functions suffixed by '_raw' are assumed
- * to access the chip over the PCI without doing byte
- * reordering. Functions suffixed by '_l2b' are
- * assumed to perform little-endian to big-endian byte
- * reordering, those suffixed by '_b2l' blah, blah,
- * blah, ...
- */
-
-/*
- * MEMORY mapped IO input / output
- */
-
-#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
-#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
-
-#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
-
-#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
-
-#else
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
-#else
-#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
-#else
-#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
-
-#endif
-
-#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
-#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
-#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
-
-#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
-
-/*
- * Set bit field ON, OFF
- */
-
-#define OUTONB(r, m) OUTB(r, INB(r) | (m))
-#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
-#define OUTONW(r, m) OUTW(r, INW(r) | (m))
-#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
-#define OUTONL(r, m) OUTL(r, INL(r) | (m))
-#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
-
-/*
- * We normally want the chip to have a consistent view
- * of driver internal data structures when we restart it.
- * Thus these macros.
- */
-#define OUTL_DSP(v) \
- do { \
- MEMORY_BARRIER(); \
- OUTL (nc_dsp, (v)); \
- } while (0)
-
-#define OUTONB_STD() \
- do { \
- MEMORY_BARRIER(); \
- OUTONB (nc_dcntl, (STD|NOCOM)); \
- } while (0)
-
-
-/*
-** NCR53C8XX devices features table.
-*/
-struct ncr_chip {
- unsigned short revision_id;
- unsigned char burst_max; /* log-base-2 of max burst */
- unsigned char offset_max;
- unsigned char nr_divisor;
- unsigned int features;
-#define FE_LED0 (1<<0)
-#define FE_WIDE (1<<1) /* Wide data transfers */
-#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
-#define FE_DBLR (1<<4) /* Clock doubler present */
-#define FE_QUAD (1<<5) /* Clock quadrupler present */
-#define FE_ERL (1<<6) /* Enable read line */
-#define FE_CLSE (1<<7) /* Cache line size enable */
-#define FE_WRIE (1<<8) /* Write & Invalidate enable */
-#define FE_ERMP (1<<9) /* Enable read multiple */
-#define FE_BOF (1<<10) /* Burst opcode fetch */
-#define FE_DFS (1<<11) /* DMA fifo size */
-#define FE_PFEN (1<<12) /* Prefetch enable */
-#define FE_LDSTR (1<<13) /* Load/Store supported */
-#define FE_RAM (1<<14) /* On chip RAM present */
-#define FE_VARCLK (1<<15) /* SCSI clock may vary */
-#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
-#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
-#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
-#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
-#define FE_LEDC (1<<20) /* Hardware control of LED */
-#define FE_DIFF (1<<21) /* Support Differential SCSI */
-#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
-#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
-#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
-#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
-#define FE_EHP (1<<27) /* 720: Even host parity */
-#define FE_MUX (1<<28) /* 720: Multiplexed bus */
-#define FE_EA (1<<29) /* 720: Enable Ack */
-
-#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
-#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
-#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
-};
-
-
-/*
-** Driver setup structure.
-**
-** This structure is initialized from linux config options.
-** It can be overridden at boot-up by the boot command line.
-*/
-#define SCSI_NCR_MAX_EXCLUDES 8
-struct ncr_driver_setup {
- u8 master_parity;
- u8 scsi_parity;
- u8 disconnection;
- u8 special_features;
- u8 force_sync_nego;
- u8 reverse_probe;
- u8 pci_fix_up;
- u8 use_nvram;
- u8 verbose;
- u8 default_tags;
- u16 default_sync;
- u16 debug;
- u8 burst_max;
- u8 led_pin;
- u8 max_wide;
- u8 settle_delay;
- u8 diff_support;
- u8 irqm;
- u8 bus_check;
- u8 optimize;
- u8 recovery;
- u8 host_id;
- u16 iarb;
- u32 excludes[SCSI_NCR_MAX_EXCLUDES];
- char tag_ctrl[100];
-};
-
-/*
-** Initial setup.
-** Can be overriden at startup by a command line.
-*/
-#define SCSI_NCR_DRIVER_SETUP \
-{ \
- SCSI_NCR_SETUP_MASTER_PARITY, \
- SCSI_NCR_SETUP_SCSI_PARITY, \
- SCSI_NCR_SETUP_DISCONNECTION, \
- SCSI_NCR_SETUP_SPECIAL_FEATURES, \
- SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
- 0, \
- 0, \
- 1, \
- 0, \
- SCSI_NCR_SETUP_DEFAULT_TAGS, \
- SCSI_NCR_SETUP_DEFAULT_SYNC, \
- 0x00, \
- 7, \
- 0, \
- 1, \
- SCSI_NCR_SETUP_SETTLE_TIME, \
- 0, \
- 0, \
- 1, \
- 0, \
- 0, \
- 255, \
- 0x00 \
-}
-
-/*
-** Boot fail safe setup.
-** Override initial setup from boot command line:
-** ncr53c8xx=safe:y
-*/
-#define SCSI_NCR_DRIVER_SAFE_SETUP \
-{ \
- 0, \
- 1, \
- 0, \
- 0, \
- 0, \
- 0, \
- 0, \
- 1, \
- 2, \
- 0, \
- 255, \
- 0x00, \
- 255, \
- 0, \
- 0, \
- 10, \
- 1, \
- 1, \
- 1, \
- 0, \
- 0, \
- 255 \
-}
-
-/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
-
-/*-----------------------------------------------------------------
-**
-** The ncr 53c810 register structure.
-**
-**-----------------------------------------------------------------
-*/
-
-struct ncr_reg {
-/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
-
-/*01*/ u8 nc_scntl1; /* no reset */
- #define ISCON 0x10 /* connected to scsi */
- #define CRST 0x08 /* force reset */
- #define IARB 0x02 /* immediate arbitration */
-
-/*02*/ u8 nc_scntl2; /* no disconnect expected */
- #define SDU 0x80 /* cmd: disconnect will raise error */
- #define CHM 0x40 /* sta: chained mode */
- #define WSS 0x08 /* sta: wide scsi send [W]*/
- #define WSR 0x01 /* sta: wide scsi received [W]*/
-
-/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
- #define EWS 0x08 /* cmd: enable wide scsi [W]*/
- #define ULTRA 0x80 /* cmd: ULTRA enable */
- /* bits 0-2, 7 rsvd for C1010 */
-
-/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
- #define RRE 0x40 /* r/w:e enable response to resel. */
- #define SRE 0x20 /* r/w:e enable response to select */
-
-/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
- /* bits 6-7 rsvd for C1010 */
-
-/*06*/ u8 nc_sdid; /* ### Destination-ID */
-
-/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
-
-/*08*/ u8 nc_sfbr; /* ### First byte in phase */
-
-/*09*/ u8 nc_socl;
- #define CREQ 0x80 /* r/w: SCSI-REQ */
- #define CACK 0x40 /* r/w: SCSI-ACK */
- #define CBSY 0x20 /* r/w: SCSI-BSY */
- #define CSEL 0x10 /* r/w: SCSI-SEL */
- #define CATN 0x08 /* r/w: SCSI-ATN */
- #define CMSG 0x04 /* r/w: SCSI-MSG */
- #define CC_D 0x02 /* r/w: SCSI-C_D */
- #define CI_O 0x01 /* r/w: SCSI-I_O */
-
-/*0a*/ u8 nc_ssid;
-
-/*0b*/ u8 nc_sbcl;
-
-/*0c*/ u8 nc_dstat;
- #define DFE 0x80 /* sta: dma fifo empty */
- #define MDPE 0x40 /* int: master data parity error */
- #define BF 0x20 /* int: script: bus fault */
- #define ABRT 0x10 /* int: script: command aborted */
- #define SSI 0x08 /* int: script: single step */
- #define SIR 0x04 /* int: script: interrupt instruct. */
- #define IID 0x01 /* int: script: illegal instruct. */
-
-/*0d*/ u8 nc_sstat0;
- #define ILF 0x80 /* sta: data in SIDL register lsb */
- #define ORF 0x40 /* sta: data in SODR register lsb */
- #define OLF 0x20 /* sta: data in SODL register lsb */
- #define AIP 0x10 /* sta: arbitration in progress */
- #define LOA 0x08 /* sta: arbitration lost */
- #define WOA 0x04 /* sta: arbitration won */
- #define IRST 0x02 /* sta: scsi reset signal */
- #define SDP 0x01 /* sta: scsi parity signal */
-
-/*0e*/ u8 nc_sstat1;
- #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
-
-/*0f*/ u8 nc_sstat2;
- #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
- #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
- #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
- #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
- #define LDSC 0x02 /* sta: disconnect & reconnect */
-
-/*10*/ u8 nc_dsa; /* --> Base page */
-/*11*/ u8 nc_dsa1;
-/*12*/ u8 nc_dsa2;
-/*13*/ u8 nc_dsa3;
-
-/*14*/ u8 nc_istat; /* --> Main Command and status */
- #define CABRT 0x80 /* cmd: abort current operation */
- #define SRST 0x40 /* mod: reset chip */
- #define SIGP 0x20 /* r/w: message from host to ncr */
- #define SEM 0x10 /* r/w: message between host + ncr */
- #define CON 0x08 /* sta: connected to scsi */
- #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
- #define SIP 0x02 /* sta: scsi-interrupt */
- #define DIP 0x01 /* sta: host/script interrupt */
-
-/*15*/ u8 nc_istat1; /* 896 and later cores only */
- #define FLSH 0x04 /* sta: chip is flushing */
- #define SRUN 0x02 /* sta: scripts are running */
- #define SIRQD 0x01 /* r/w: disable INT pin */
-
-/*16*/ u8 nc_mbox0; /* 896 and later cores only */
-/*17*/ u8 nc_mbox1; /* 896 and later cores only */
-
-/*18*/ u8 nc_ctest0;
- #define EHP 0x04 /* 720 even host parity */
-/*19*/ u8 nc_ctest1;
-
-/*1a*/ u8 nc_ctest2;
- #define CSIGP 0x40
- /* bits 0-2,7 rsvd for C1010 */
-
-/*1b*/ u8 nc_ctest3;
- #define FLF 0x08 /* cmd: flush dma fifo */
- #define CLF 0x04 /* cmd: clear dma fifo */
- #define FM 0x02 /* mod: fetch pin mode */
- #define WRIE 0x01 /* mod: write and invalidate enable */
- /* bits 4-7 rsvd for C1010 */
-
-/*1c*/ u32 nc_temp; /* ### Temporary stack */
-
-/*20*/ u8 nc_dfifo;
-/*21*/ u8 nc_ctest4;
- #define MUX 0x80 /* 720 host bus multiplex mode */
- #define BDIS 0x80 /* mod: burst disable */
- #define MPEE 0x08 /* mod: master parity error enable */
-
-/*22*/ u8 nc_ctest5;
- #define DFS 0x20 /* mod: dma fifo size */
- /* bits 0-1, 3-7 rsvd for C1010 */
-/*23*/ u8 nc_ctest6;
-
-/*24*/ u32 nc_dbc; /* ### Byte count and command */
-/*28*/ u32 nc_dnad; /* ### Next command register */
-/*2c*/ u32 nc_dsp; /* --> Script Pointer */
-/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
-
-/*34*/ u8 nc_scratcha; /* Temporary register a */
-/*35*/ u8 nc_scratcha1;
-/*36*/ u8 nc_scratcha2;
-/*37*/ u8 nc_scratcha3;
-
-/*38*/ u8 nc_dmode;
- #define BL_2 0x80 /* mod: burst length shift value +2 */
- #define BL_1 0x40 /* mod: burst length shift value +1 */
- #define ERL 0x08 /* mod: enable read line */
- #define ERMP 0x04 /* mod: enable read multiple */
- #define BOF 0x02 /* mod: burst op code fetch */
-
-/*39*/ u8 nc_dien;
-/*3a*/ u8 nc_sbr;
-
-/*3b*/ u8 nc_dcntl; /* --> Script execution control */
- #define CLSE 0x80 /* mod: cache line size enable */
- #define PFF 0x40 /* cmd: pre-fetch flush */
- #define PFEN 0x20 /* mod: pre-fetch enable */
- #define EA 0x20 /* mod: 720 enable-ack */
- #define SSM 0x10 /* mod: single step mode */
- #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
- #define STD 0x04 /* cmd: start dma mode */
- #define IRQD 0x02 /* mod: irq disable */
- #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
- /* bits 0-1 rsvd for C1010 */
-
-/*3c*/ u32 nc_adder;
-
-/*40*/ u16 nc_sien; /* -->: interrupt enable */
-/*42*/ u16 nc_sist; /* <--: interrupt status */
- #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
- #define STO 0x0400/* sta: timeout (select) */
- #define GEN 0x0200/* sta: timeout (general) */
- #define HTH 0x0100/* sta: timeout (handshake) */
- #define MA 0x80 /* sta: phase mismatch */
- #define CMP 0x40 /* sta: arbitration complete */
- #define SEL 0x20 /* sta: selected by another device */
- #define RSL 0x10 /* sta: reselected by another device*/
- #define SGE 0x08 /* sta: gross error (over/underflow)*/
- #define UDC 0x04 /* sta: unexpected disconnect */
- #define RST 0x02 /* sta: scsi bus reset detected */
- #define PAR 0x01 /* sta: scsi parity error */
-
-/*44*/ u8 nc_slpar;
-/*45*/ u8 nc_swide;
-/*46*/ u8 nc_macntl;
-/*47*/ u8 nc_gpcntl;
-/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
-/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
-/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
-
-/*4c*/ u8 nc_stest0;
-
-/*4d*/ u8 nc_stest1;
- #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
- #define DBLEN 0x08 /* clock doubler running */
- #define DBLSEL 0x04 /* clock doubler selected */
-
-
-/*4e*/ u8 nc_stest2;
- #define ROF 0x40 /* reset scsi offset (after gross error!) */
- #define DIF 0x20 /* 720 SCSI differential mode */
- #define EXT 0x02 /* extended filtering */
-
-/*4f*/ u8 nc_stest3;
- #define TE 0x80 /* c: tolerAnt enable */
- #define HSC 0x20 /* c: Halt SCSI Clock */
- #define CSF 0x02 /* c: clear scsi fifo */
-
-/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
-/*52*/ u8 nc_stest4;
- #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
- #define SMODE_HVD 0x40 /* High Voltage Differential */
- #define SMODE_SE 0x80 /* Single Ended */
- #define SMODE_LVD 0xc0 /* Low Voltage Differential */
- #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
- /* bits 0-5 rsvd for C1010 */
-
-/*53*/ u8 nc_53_;
-/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
-/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
- #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
- #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
- #define ENNDJ 0x20 /* Enable Non Data PM Jump */
- #define DISFC 0x10 /* Disable Auto FIFO Clear */
- #define DILS 0x02 /* Disable Internal Load/Store */
- #define DPR 0x01 /* Disable Pipe Req */
-
-/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
- #define ZMOD 0x80 /* High Impedance Mode */
- #define DIC 0x10 /* Disable Internal Cycles */
- #define DDAC 0x08 /* Disable Dual Address Cycle */
- #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
- #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
- #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
-
-/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
-/*5a*/ u16 nc_5a_;
-
-/*5c*/ u8 nc_scr0; /* Working register B */
-/*5d*/ u8 nc_scr1; /* */
-/*5e*/ u8 nc_scr2; /* */
-/*5f*/ u8 nc_scr3; /* */
-
-/*60*/ u8 nc_scrx[64]; /* Working register C-R */
-/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
-/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
-/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
-/*ac*/ u32 nc_drs; /* DSA Relative Selector */
-/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
-/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
-/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
-/*bc*/ u16 nc_scntl4; /* C1010 only */
- #define U3EN 0x80 /* Enable Ultra 3 */
- #define AIPEN 0x40 /* Allow check upper byte lanes */
- #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
- transfer edge */
- #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
- transfer edge */
-
-/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
-/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
-
-/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
-/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
-/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
-/*c9*/ u8 nc_rbc1; /* */
-/*ca*/ u8 nc_rbc2; /* */
-/*cb*/ u8 nc_rbc3; /* */
-
-/*cc*/ u8 nc_ua; /* Updated Address */
-/*cd*/ u8 nc_ua1; /* */
-/*ce*/ u8 nc_ua2; /* */
-/*cf*/ u8 nc_ua3; /* */
-/*d0*/ u32 nc_esa; /* Entry Storage Address */
-/*d4*/ u8 nc_ia; /* Instruction Address */
-/*d5*/ u8 nc_ia1;
-/*d6*/ u8 nc_ia2;
-/*d7*/ u8 nc_ia3;
-/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
-/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
-
- /* Following for C1010 only */
-/*e0*/ u16 nc_crcpad; /* CRC Value */
-/*e2*/ u8 nc_crccntl0; /* CRC control register */
- #define SNDCRC 0x10 /* Send CRC Request */
-/*e3*/ u8 nc_crccntl1; /* CRC control register */
-/*e4*/ u32 nc_crcdata; /* CRC data register */
-/*e8*/ u32 nc_e8_; /* rsvd */
-/*ec*/ u32 nc_ec_; /* rsvd */
-/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
-
-};
-
-/*-----------------------------------------------------------
-**
-** Utility macros for the script.
-**
-**-----------------------------------------------------------
-*/
-
-#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
-#define REG(r) REGJ (nc_, r)
-
-typedef u32 ncrcmd;
-
-/*-----------------------------------------------------------
-**
-** SCSI phases
-**
-** DT phases illegal for ncr driver.
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_DATA_OUT 0x00000000
-#define SCR_DATA_IN 0x01000000
-#define SCR_COMMAND 0x02000000
-#define SCR_STATUS 0x03000000
-#define SCR_DT_DATA_OUT 0x04000000
-#define SCR_DT_DATA_IN 0x05000000
-#define SCR_MSG_OUT 0x06000000
-#define SCR_MSG_IN 0x07000000
-
-#define SCR_ILG_OUT 0x04000000
-#define SCR_ILG_IN 0x05000000
-
-/*-----------------------------------------------------------
-**
-** Data transfer via SCSI.
-**
-**-----------------------------------------------------------
-**
-** MOVE_ABS (LEN)
-** <<start address>>
-**
-** MOVE_IND (LEN)
-** <<dnad_offset>>
-**
-** MOVE_TBL
-** <<dnad_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define OPC_MOVE 0x08000000
-
-#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
-
-#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
-#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
-#define SCR_CHMOV_TBL (0x10000000)
-
-struct scr_tblmove {
- u32 size;
- u32 addr;
-};
-
-/*-----------------------------------------------------------
-**
-** Selection
-**
-**-----------------------------------------------------------
-**
-** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
-** <<alternate_address>>
-**
-** SEL_TBL | << dnad_offset>> [ | REL_JMP]
-** <<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_SEL_ABS 0x40000000
-#define SCR_SEL_ABS_ATN 0x41000000
-#define SCR_SEL_TBL 0x42000000
-#define SCR_SEL_TBL_ATN 0x43000000
-
-
-#ifdef SCSI_NCR_BIG_ENDIAN
-struct scr_tblsel {
- u8 sel_scntl3;
- u8 sel_id;
- u8 sel_sxfer;
- u8 sel_scntl4;
-};
-#else
-struct scr_tblsel {
- u8 sel_scntl4;
- u8 sel_sxfer;
- u8 sel_id;
- u8 sel_scntl3;
-};
-#endif
-
-#define SCR_JMP_REL 0x04000000
-#define SCR_ID(id) (((u32)(id)) << 16)
-
-/*-----------------------------------------------------------
-**
-** Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-** WAIT_DISC
-** dummy: <<alternate_address>>
-**
-** WAIT_RESEL
-** <<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_WAIT_DISC 0x48000000
-#define SCR_WAIT_RESEL 0x50000000
-
-/*-----------------------------------------------------------
-**
-** Bit Set / Reset
-**
-**-----------------------------------------------------------
-**
-** SET (flags {|.. })
-**
-** CLR (flags {|.. })
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_SET(f) (0x58000000 | (f))
-#define SCR_CLR(f) (0x60000000 | (f))
-
-#define SCR_CARRY 0x00000400
-#define SCR_TRG 0x00000200
-#define SCR_ACK 0x00000040
-#define SCR_ATN 0x00000008
-
-
-
-
-/*-----------------------------------------------------------
-**
-** Memory to memory move
-**
-**-----------------------------------------------------------
-**
-** COPY (bytecount)
-** << source_address >>
-** << destination_address >>
-**
-** SCR_COPY sets the NO FLUSH option by default.
-** SCR_COPY_F does not set this option.
-**
-** For chips which do not support this option,
-** ncr_copy_and_bind() will remove this bit.
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_FLUSH 0x01000000
-
-#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
-#define SCR_COPY_F(n) (0xc0000000 | (n))
-
-/*-----------------------------------------------------------
-**
-** Register move and binary operations
-**
-**-----------------------------------------------------------
-**
-** SFBR_REG (reg, op, data) reg = SFBR op data
-** << 0 >>
-**
-** REG_SFBR (reg, op, data) SFBR = reg op data
-** << 0 >>
-**
-** REG_REG (reg, op, data) reg = reg op data
-** << 0 >>
-**
-**-----------------------------------------------------------
-** On 810A, 860, 825A, 875, 895 and 896 chips the content
-** of SFBR register can be used as data (SCR_SFBR_DATA).
-** The 896 has additionnal IO registers starting at
-** offset 0x80. Bit 7 of register offset is stored in
-** bit 7 of the SCRIPTS instruction first DWORD.
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
-
-#define SCR_SFBR_REG(reg,op,data) \
- (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_SFBR(reg,op,data) \
- (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_REG(reg,op,data) \
- (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-
-#define SCR_LOAD 0x00000000
-#define SCR_SHL 0x01000000
-#define SCR_OR 0x02000000
-#define SCR_XOR 0x03000000
-#define SCR_AND 0x04000000
-#define SCR_SHR 0x05000000
-#define SCR_ADD 0x06000000
-#define SCR_ADDC 0x07000000
-
-#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
-
-/*-----------------------------------------------------------
-**
-** FROM_REG (reg) SFBR = reg
-** << 0 >>
-**
-** TO_REG (reg) reg = SFBR
-** << 0 >>
-**
-** LOAD_REG (reg, data) reg = <data>
-** << 0 >>
-**
-** LOAD_SFBR(data) SFBR = <data>
-** << 0 >>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_FROM_REG(reg) \
- SCR_REG_SFBR(reg,SCR_OR,0)
-
-#define SCR_TO_REG(reg) \
- SCR_SFBR_REG(reg,SCR_OR,0)
-
-#define SCR_LOAD_REG(reg,data) \
- SCR_REG_REG(reg,SCR_LOAD,data)
-
-#define SCR_LOAD_SFBR(data) \
- (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
-
-/*-----------------------------------------------------------
-**
-** LOAD from memory to register.
-** STORE from register to memory.
-**
-** Only supported by 810A, 860, 825A, 875, 895 and 896.
-**
-**-----------------------------------------------------------
-**
-** LOAD_ABS (LEN)
-** <<start address>>
-**
-** LOAD_REL (LEN) (DSA relative)
-** <<dsa_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
-#define SCR_NO_FLUSH2 0x02000000
-#define SCR_DSA_REL2 0x10000000
-
-#define SCR_LOAD_R(reg, how, n) \
- (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_STORE_R(reg, how, n) \
- (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
-#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
-#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
-
-#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
-#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
-#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
-
-
-/*-----------------------------------------------------------
-**
-** Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
-** <<address>>
-**
-** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
-** <<distance>>
-**
-** CALL [ | IFTRUE/IFFALSE ( ... ) ]
-** <<address>>
-**
-** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
-** <<distance>>
-**
-** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
-** <<dummy>>
-**
-** INT [ | IFTRUE/IFFALSE ( ... ) ]
-** <<ident>>
-**
-** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
-** <<ident>>
-**
-** Conditions:
-** WHEN (phase)
-** IF (phase)
-** CARRYSET
-** DATA (data, mask)
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_OP 0x80000000
-#define SCR_JUMP 0x80080000
-#define SCR_JUMP64 0x80480000
-#define SCR_JUMPR 0x80880000
-#define SCR_CALL 0x88080000
-#define SCR_CALLR 0x88880000
-#define SCR_RETURN 0x90080000
-#define SCR_INT 0x98080000
-#define SCR_INT_FLY 0x98180000
-
-#define IFFALSE(arg) (0x00080000 | (arg))
-#define IFTRUE(arg) (0x00000000 | (arg))
-
-#define WHEN(phase) (0x00030000 | (phase))
-#define IF(phase) (0x00020000 | (phase))
-
-#define DATA(D) (0x00040000 | ((D) & 0xff))
-#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
-
-#define CARRYSET (0x00200000)
-
-/*-----------------------------------------------------------
-**
-** SCSI constants.
-**
-**-----------------------------------------------------------
-*/
-
-/*
-** Messages
-*/
-
-#define M_COMPLETE COMMAND_COMPLETE
-#define M_EXTENDED EXTENDED_MESSAGE
-#define M_SAVE_DP SAVE_POINTERS
-#define M_RESTORE_DP RESTORE_POINTERS
-#define M_DISCONNECT DISCONNECT
-#define M_ID_ERROR INITIATOR_ERROR
-#define M_ABORT ABORT_TASK_SET
-#define M_REJECT MESSAGE_REJECT
-#define M_NOOP NOP
-#define M_PARITY MSG_PARITY_ERROR
-#define M_LCOMPLETE LINKED_CMD_COMPLETE
-#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE
-#define M_RESET TARGET_RESET
-#define M_ABORT_TAG ABORT_TASK
-#define M_CLEAR_QUEUE CLEAR_TASK_SET
-#define M_INIT_REC INITIATE_RECOVERY
-#define M_REL_REC RELEASE_RECOVERY
-#define M_TERMINATE (0x11)
-#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG
-#define M_HEAD_TAG HEAD_OF_QUEUE_TAG
-#define M_ORDERED_TAG ORDERED_QUEUE_TAG
-#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE
-#define M_IDENTIFY (0x80)
-
-#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER
-#define M_X_SYNC_REQ EXTENDED_SDTR
-#define M_X_WIDE_REQ EXTENDED_WDTR
-#define M_X_PPR_REQ EXTENDED_PPR
-
-/*
-** Status
-*/
-
-#define S_GOOD (0x00)
-#define S_CHECK_COND (0x02)
-#define S_COND_MET (0x04)
-#define S_BUSY (0x08)
-#define S_INT (0x10)
-#define S_INT_COND_MET (0x14)
-#define S_CONFLICT (0x18)
-#define S_TERMINATED (0x20)
-#define S_QUEUE_FULL (0x28)
-#define S_ILLEGAL (0xff)
-#define S_SENSE (0x80)
-
-/*
- * End of ncrreg from FreeBSD
- */
-
-#endif /* defined SYM53C8XX_DEFS_H */