drm: Add DRM_DEBUG_ATOMIC
Atomic state handling adds a lot of indirection and complexity between
simple updates and drivers. For easier debugging the diagnostic output
is therefore rather chatty. Which is great for tracking down atomic
issues, but really annoying otherwise.
Add a new DRM_DEBUG_ATOMIC to be able to filter this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index c2e9c52..321e098 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -92,7 +92,7 @@
state->dev = dev;
- DRM_DEBUG_KMS("Allocate atomic state %p\n", state);
+ DRM_DEBUG_ATOMIC("Allocate atomic state %p\n", state);
return state;
fail:
@@ -122,7 +122,7 @@
struct drm_mode_config *config = &dev->mode_config;
int i;
- DRM_DEBUG_KMS("Clearing atomic state %p\n", state);
+ DRM_DEBUG_ATOMIC("Clearing atomic state %p\n", state);
for (i = 0; i < state->num_connector; i++) {
struct drm_connector *connector = state->connectors[i];
@@ -172,7 +172,7 @@
{
drm_atomic_state_clear(state);
- DRM_DEBUG_KMS("Freeing atomic state %p\n", state);
+ DRM_DEBUG_ATOMIC("Freeing atomic state %p\n", state);
kfree_state(state);
}
@@ -217,8 +217,8 @@
state->crtcs[index] = crtc;
crtc_state->state = state;
- DRM_DEBUG_KMS("Added [CRTC:%d] %p state to %p\n",
- crtc->base.id, crtc_state, state);
+ DRM_DEBUG_ATOMIC("Added [CRTC:%d] %p state to %p\n",
+ crtc->base.id, crtc_state, state);
return crtc_state;
}
@@ -293,8 +293,8 @@
*/
if (state->active && !state->enable) {
- DRM_DEBUG_KMS("[CRTC:%d] active without enabled\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] active without enabled\n",
+ crtc->base.id);
return -EINVAL;
}
@@ -340,8 +340,8 @@
state->planes[index] = plane;
plane_state->state = state;
- DRM_DEBUG_KMS("Added [PLANE:%d] %p state to %p\n",
- plane->base.id, plane_state, state);
+ DRM_DEBUG_ATOMIC("Added [PLANE:%d] %p state to %p\n",
+ plane->base.id, plane_state, state);
if (plane_state->crtc) {
struct drm_crtc_state *crtc_state;
@@ -477,10 +477,10 @@
/* either *both* CRTC and FB must be set, or neither */
if (WARN_ON(state->crtc && !state->fb)) {
- DRM_DEBUG_KMS("CRTC set but no FB\n");
+ DRM_DEBUG_ATOMIC("CRTC set but no FB\n");
return -EINVAL;
} else if (WARN_ON(state->fb && !state->crtc)) {
- DRM_DEBUG_KMS("FB set but no CRTC\n");
+ DRM_DEBUG_ATOMIC("FB set but no CRTC\n");
return -EINVAL;
}
@@ -490,7 +490,7 @@
/* Check whether this plane is usable on this CRTC */
if (!(plane->possible_crtcs & drm_crtc_mask(state->crtc))) {
- DRM_DEBUG_KMS("Invalid crtc for plane\n");
+ DRM_DEBUG_ATOMIC("Invalid crtc for plane\n");
return -EINVAL;
}
@@ -499,8 +499,8 @@
if (state->fb->pixel_format == plane->format_types[i])
break;
if (i == plane->format_count) {
- DRM_DEBUG_KMS("Invalid pixel format %s\n",
- drm_get_format_name(state->fb->pixel_format));
+ DRM_DEBUG_ATOMIC("Invalid pixel format %s\n",
+ drm_get_format_name(state->fb->pixel_format));
return -EINVAL;
}
@@ -509,9 +509,9 @@
state->crtc_x > INT_MAX - (int32_t) state->crtc_w ||
state->crtc_h > INT_MAX ||
state->crtc_y > INT_MAX - (int32_t) state->crtc_h) {
- DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
- state->crtc_w, state->crtc_h,
- state->crtc_x, state->crtc_y);
+ DRM_DEBUG_ATOMIC("Invalid CRTC coordinates %ux%u+%d+%d\n",
+ state->crtc_w, state->crtc_h,
+ state->crtc_x, state->crtc_y);
return -ERANGE;
}
@@ -523,12 +523,12 @@
state->src_x > fb_width - state->src_w ||
state->src_h > fb_height ||
state->src_y > fb_height - state->src_h) {
- DRM_DEBUG_KMS("Invalid source coordinates "
- "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
- state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
- state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
- state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
- state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10);
+ DRM_DEBUG_ATOMIC("Invalid source coordinates "
+ "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
+ state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
+ state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
+ state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
+ state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10);
return -ENOSPC;
}
@@ -575,7 +575,7 @@
* at most the array is a bit too large.
*/
if (index >= state->num_connector) {
- DRM_DEBUG_KMS("Hot-added connector would overflow state array, restarting\n");
+ DRM_DEBUG_ATOMIC("Hot-added connector would overflow state array, restarting\n");
return ERR_PTR(-EAGAIN);
}
@@ -590,8 +590,8 @@
state->connectors[index] = connector;
connector_state->state = state;
- DRM_DEBUG_KMS("Added [CONNECTOR:%d] %p state to %p\n",
- connector->base.id, connector_state, state);
+ DRM_DEBUG_ATOMIC("Added [CONNECTOR:%d] %p state to %p\n",
+ connector->base.id, connector_state, state);
if (connector_state->crtc) {
struct drm_crtc_state *crtc_state;
@@ -752,10 +752,11 @@
}
if (crtc)
- DRM_DEBUG_KMS("Link plane state %p to [CRTC:%d]\n",
- plane_state, crtc->base.id);
+ DRM_DEBUG_ATOMIC("Link plane state %p to [CRTC:%d]\n",
+ plane_state, crtc->base.id);
else
- DRM_DEBUG_KMS("Link plane state %p to [NOCRTC]\n", plane_state);
+ DRM_DEBUG_ATOMIC("Link plane state %p to [NOCRTC]\n",
+ plane_state);
return 0;
}
@@ -782,10 +783,11 @@
plane_state->fb = fb;
if (fb)
- DRM_DEBUG_KMS("Set [FB:%d] for plane state %p\n",
- fb->base.id, plane_state);
+ DRM_DEBUG_ATOMIC("Set [FB:%d] for plane state %p\n",
+ fb->base.id, plane_state);
else
- DRM_DEBUG_KMS("Set [NOFB] for plane state %p\n", plane_state);
+ DRM_DEBUG_ATOMIC("Set [NOFB] for plane state %p\n",
+ plane_state);
}
EXPORT_SYMBOL(drm_atomic_set_fb_for_plane);
@@ -818,11 +820,11 @@
conn_state->crtc = crtc;
if (crtc)
- DRM_DEBUG_KMS("Link connector state %p to [CRTC:%d]\n",
- conn_state, crtc->base.id);
+ DRM_DEBUG_ATOMIC("Link connector state %p to [CRTC:%d]\n",
+ conn_state, crtc->base.id);
else
- DRM_DEBUG_KMS("Link connector state %p to [NOCRTC]\n",
- conn_state);
+ DRM_DEBUG_ATOMIC("Link connector state %p to [NOCRTC]\n",
+ conn_state);
return 0;
}
@@ -858,8 +860,8 @@
if (ret)
return ret;
- DRM_DEBUG_KMS("Adding all current connectors for [CRTC:%d] to %p\n",
- crtc->base.id, state);
+ DRM_DEBUG_ATOMIC("Adding all current connectors for [CRTC:%d] to %p\n",
+ crtc->base.id, state);
/*
* Changed connectors are already in @state, so only need to look at the
@@ -901,8 +903,8 @@
num_connected_connectors++;
}
- DRM_DEBUG_KMS("State %p has %i connectors for [CRTC:%d]\n",
- state, num_connected_connectors, crtc->base.id);
+ DRM_DEBUG_ATOMIC("State %p has %i connectors for [CRTC:%d]\n",
+ state, num_connected_connectors, crtc->base.id);
return num_connected_connectors;
}
@@ -953,7 +955,7 @@
int ncrtcs = config->num_crtc;
int i, ret = 0;
- DRM_DEBUG_KMS("checking %p\n", state);
+ DRM_DEBUG_ATOMIC("checking %p\n", state);
for (i = 0; i < nplanes; i++) {
struct drm_plane *plane = state->planes[i];
@@ -963,8 +965,8 @@
ret = drm_atomic_plane_check(plane, state->plane_states[i]);
if (ret) {
- DRM_DEBUG_KMS("[PLANE:%d] atomic core check failed\n",
- plane->base.id);
+ DRM_DEBUG_ATOMIC("[PLANE:%d] atomic core check failed\n",
+ plane->base.id);
return ret;
}
}
@@ -977,8 +979,8 @@
ret = drm_atomic_crtc_check(crtc, state->crtc_states[i]);
if (ret) {
- DRM_DEBUG_KMS("[CRTC:%d] atomic core check failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] atomic core check failed\n",
+ crtc->base.id);
return ret;
}
}
@@ -996,8 +998,8 @@
if (crtc_state->mode_changed ||
crtc_state->active_changed) {
- DRM_DEBUG_KMS("[CRTC:%d] requires full modeset\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] requires full modeset\n",
+ crtc->base.id);
return -EINVAL;
}
}
@@ -1032,7 +1034,7 @@
if (ret)
return ret;
- DRM_DEBUG_KMS("commiting %p\n", state);
+ DRM_DEBUG_ATOMIC("commiting %p\n", state);
return config->funcs->atomic_commit(state->dev, state, false);
}
@@ -1063,7 +1065,7 @@
if (ret)
return ret;
- DRM_DEBUG_KMS("commiting %p asynchronously\n", state);
+ DRM_DEBUG_ATOMIC("commiting %p asynchronously\n", state);
return config->funcs->atomic_commit(state->dev, state, true);
}
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index e70adfc..9e87671 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -116,9 +116,9 @@
*/
WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
- DRM_DEBUG_KMS("[ENCODER:%d:%s] in use on [CRTC:%d], stealing it\n",
- encoder->base.id, encoder->name,
- encoder_crtc->base.id);
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d], stealing it\n",
+ encoder->base.id, encoder->name,
+ encoder_crtc->base.id);
crtc_state = drm_atomic_get_crtc_state(state, encoder_crtc);
if (IS_ERR(crtc_state))
@@ -130,9 +130,9 @@
if (connector->state->best_encoder != encoder)
continue;
- DRM_DEBUG_KMS("Stealing encoder from [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("Stealing encoder from [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
connector_state = drm_atomic_get_connector_state(state,
connector);
@@ -165,9 +165,9 @@
if (!connector)
return 0;
- DRM_DEBUG_KMS("Updating routing for [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("Updating routing for [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
if (connector->state->crtc != connector_state->crtc) {
if (connector->state->crtc) {
@@ -186,7 +186,7 @@
}
if (!connector_state->crtc) {
- DRM_DEBUG_KMS("Disabling [CONNECTOR:%d:%s]\n",
+ DRM_DEBUG_ATOMIC("Disabling [CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
@@ -199,19 +199,19 @@
new_encoder = funcs->best_encoder(connector);
if (!new_encoder) {
- DRM_DEBUG_KMS("No suitable encoder found for [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("No suitable encoder found for [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
return -EINVAL;
}
if (new_encoder == connector_state->best_encoder) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d]\n",
- connector->base.id,
- connector->name,
- new_encoder->base.id,
- new_encoder->name,
- connector_state->crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d]\n",
+ connector->base.id,
+ connector->name,
+ new_encoder->base.id,
+ new_encoder->name,
+ connector_state->crtc->base.id);
return 0;
}
@@ -222,9 +222,9 @@
if (encoder_crtc) {
ret = steal_encoder(state, new_encoder, encoder_crtc);
if (ret) {
- DRM_DEBUG_KMS("Encoder stealing failed for [CONNECTOR:%d:%s]\n",
- connector->base.id,
- connector->name);
+ DRM_DEBUG_ATOMIC("Encoder stealing failed for [CONNECTOR:%d:%s]\n",
+ connector->base.id,
+ connector->name);
return ret;
}
}
@@ -235,12 +235,12 @@
crtc_state = state->crtc_states[idx];
crtc_state->mode_changed = true;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d]\n",
- connector->base.id,
- connector->name,
- new_encoder->base.id,
- new_encoder->name,
- connector_state->crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d]\n",
+ connector->base.id,
+ connector->name,
+ new_encoder->base.id,
+ new_encoder->name,
+ connector_state->crtc->base.id);
return 0;
}
@@ -292,7 +292,7 @@
encoder->bridge, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_KMS("Bridge fixup failed\n");
+ DRM_DEBUG_ATOMIC("Bridge fixup failed\n");
return -EINVAL;
}
}
@@ -301,16 +301,16 @@
ret = funcs->atomic_check(encoder, crtc_state,
conn_state);
if (ret) {
- DRM_DEBUG_KMS("[ENCODER:%d:%s] check failed\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] check failed\n",
+ encoder->base.id, encoder->name);
return ret;
}
} else {
ret = funcs->mode_fixup(encoder, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_KMS("[ENCODER:%d:%s] fixup failed\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] fixup failed\n",
+ encoder->base.id, encoder->name);
return -EINVAL;
}
}
@@ -330,8 +330,8 @@
ret = funcs->mode_fixup(crtc, &crtc_state->mode,
&crtc_state->adjusted_mode);
if (!ret) {
- DRM_DEBUG_KMS("[CRTC:%d] fixup failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] fixup failed\n",
+ crtc->base.id);
return -EINVAL;
}
}
@@ -384,14 +384,14 @@
continue;
if (!drm_mode_equal(&crtc->state->mode, &crtc_state->mode)) {
- DRM_DEBUG_KMS("[CRTC:%d] mode changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] mode changed\n",
+ crtc->base.id);
crtc_state->mode_changed = true;
}
if (crtc->state->enable != crtc_state->enable) {
- DRM_DEBUG_KMS("[CRTC:%d] enable changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] enable changed\n",
+ crtc->base.id);
crtc_state->mode_changed = true;
}
}
@@ -428,17 +428,17 @@
* a full modeset because update_connector_routing force that.
*/
if (crtc->state->active != crtc_state->active) {
- DRM_DEBUG_KMS("[CRTC:%d] active changed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] active changed\n",
+ crtc->base.id);
crtc_state->active_changed = true;
}
if (!needs_modeset(crtc_state))
continue;
- DRM_DEBUG_KMS("[CRTC:%d] needs all connectors, enable: %c, active: %c\n",
- crtc->base.id,
- crtc_state->enable ? 'y' : 'n',
+ DRM_DEBUG_ATOMIC("[CRTC:%d] needs all connectors, enable: %c, active: %c\n",
+ crtc->base.id,
+ crtc_state->enable ? 'y' : 'n',
crtc_state->active ? 'y' : 'n');
ret = drm_atomic_add_affected_connectors(state, crtc);
@@ -449,8 +449,8 @@
crtc);
if (crtc_state->enable != !!num_connectors) {
- DRM_DEBUG_KMS("[CRTC:%d] enabled/connectors mismatch\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] enabled/connectors mismatch\n",
+ crtc->base.id);
return -EINVAL;
}
@@ -497,8 +497,8 @@
ret = funcs->atomic_check(plane, plane_state);
if (ret) {
- DRM_DEBUG_KMS("[PLANE:%d] atomic driver check failed\n",
- plane->base.id);
+ DRM_DEBUG_ATOMIC("[PLANE:%d] atomic driver check failed\n",
+ plane->base.id);
return ret;
}
}
@@ -517,8 +517,8 @@
ret = funcs->atomic_check(crtc, state->crtc_states[i]);
if (ret) {
- DRM_DEBUG_KMS("[CRTC:%d] atomic driver check failed\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("[CRTC:%d] atomic driver check failed\n",
+ crtc->base.id);
return ret;
}
}
@@ -600,8 +600,8 @@
funcs = encoder->helper_private;
- DRM_DEBUG_KMS("disabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("disabling [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
@@ -639,8 +639,8 @@
funcs = crtc->helper_private;
- DRM_DEBUG_KMS("disabling [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("disabling [CRTC:%d]\n",
+ crtc->base.id);
/* Right function depends upon target state. */
@@ -724,8 +724,8 @@
funcs = crtc->helper_private;
if (crtc->state->enable) {
- DRM_DEBUG_KMS("modeset on [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("modeset on [CRTC:%d]\n",
+ crtc->base.id);
funcs->mode_set_nofb(crtc);
}
@@ -752,8 +752,8 @@
if (!new_crtc_state->mode_changed)
continue;
- DRM_DEBUG_KMS("modeset on [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("modeset on [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
@@ -816,8 +816,8 @@
funcs = crtc->helper_private;
if (crtc->state->enable) {
- DRM_DEBUG_KMS("enabling [CRTC:%d]\n",
- crtc->base.id);
+ DRM_DEBUG_ATOMIC("enabling [CRTC:%d]\n",
+ crtc->base.id);
if (funcs->enable)
funcs->enable(crtc);
@@ -842,8 +842,8 @@
encoder = connector->state->best_encoder;
funcs = encoder->helper_private;
- DRM_DEBUG_KMS("enabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
+ DRM_DEBUG_ATOMIC("enabling [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal