sfc: Add support for sub-10G speeds
The SFC4000 has a separate MAC for use at sub-10G speeds. Introduce
an efx_mac_operations structure with implementations for the two MACs.
Switch between the MACs as necessary.
PHY settings are independent of the MAC, so add get_settings() and
set_settings() to efx_phy_operations. Also add macs field to indicate
which MACs the PHY is connected to.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/sfc/enum.h b/drivers/net/sfc/enum.h
index 41e758e..0c2e41c 100644
--- a/drivers/net/sfc/enum.h
+++ b/drivers/net/sfc/enum.h
@@ -1,6 +1,6 @@
/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007 Solarflare Communications Inc.
+ * Copyright 2007-2008 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -13,22 +13,24 @@
/**
* enum efx_loopback_mode - loopback modes
* @LOOPBACK_NONE: no loopback
- * @LOOPBACK_XGMII: loopback within MAC at XGMII level
- * @LOOPBACK_XGXS: loopback within MAC at XGXS level
- * @LOOPBACK_XAUI: loopback within MAC at XAUI level
- * @LOOPBACK_PHYXS: loopback within PHY at PHYXS level
- * @LOOPBACK_PCS: loopback within PHY at PCS level
- * @LOOPBACK_PMAPMD: loopback within PHY at PMAPMD level
+ * @LOOPBACK_GMAC: loopback within GMAC at unspecified level
+ * @LOOPBACK_XGMII: loopback within XMAC at XGMII level
+ * @LOOPBACK_XGXS: loopback within XMAC at XGXS level
+ * @LOOPBACK_XAUI: loopback within XMAC at XAUI level
+ * @LOOPBACK_GPHY: loopback within 1G PHY at unspecified level
+ * @LOOPBACK_PHYXS: loopback within 10G PHY at PHYXS level
+ * @LOOPBACK_PCS: loopback within 10G PHY at PCS level
+ * @LOOPBACK_PMAPMD: loopback within 10G PHY at PMAPMD level
* @LOOPBACK_NETWORK: reflecting loopback (even further than furthest!)
*/
/* Please keep in order and up-to-date w.r.t the following two #defines */
enum efx_loopback_mode {
LOOPBACK_NONE = 0,
- LOOPBACK_MAC = 1,
+ LOOPBACK_GMAC = 1,
LOOPBACK_XGMII = 2,
LOOPBACK_XGXS = 3,
LOOPBACK_XAUI = 4,
- LOOPBACK_PHY = 5,
+ LOOPBACK_GPHY = 5,
LOOPBACK_PHYXS = 6,
LOOPBACK_PCS = 7,
LOOPBACK_PMAPMD = 8,
@@ -45,15 +47,16 @@
LOOPBACK_MODE_NAME(efx->loopback_mode)
/* These loopbacks occur within the controller */
-#define LOOPBACKS_10G_INTERNAL ((1 << LOOPBACK_XGMII)| \
- (1 << LOOPBACK_XGXS) | \
- (1 << LOOPBACK_XAUI))
+#define LOOPBACKS_INTERNAL ((1 << LOOPBACK_GMAC) | \
+ (1 << LOOPBACK_XGMII)| \
+ (1 << LOOPBACK_XGXS) | \
+ (1 << LOOPBACK_XAUI))
#define LOOPBACK_MASK(_efx) \
(1 << (_efx)->loopback_mode)
#define LOOPBACK_INTERNAL(_efx) \
- (!!(LOOPBACKS_10G_INTERNAL & LOOPBACK_MASK(_efx)))
+ (!!(LOOPBACKS_INTERNAL & LOOPBACK_MASK(_efx)))
#define LOOPBACK_OUT_OF(_from, _to, _mask) \
((LOOPBACK_MASK(_from) & (_mask)) && !(LOOPBACK_MASK(_to) & (_mask)))