RTC: Convert rtc drivers to use the alarm_irq_enable method
Some rtc drivers use the ioctl method instead of the alarm_irq_enable
method for enabling alarm interupts. With the new virtualized RTC
rework, its important for drivers to use the alarm_irq_enable instead.
This patch converts the drivers that use the AIE ioctl method to
use the alarm_irq_enable method. Other ioctl cmds are left untouched.
I have not been able to test or even compile most of these drivers.
Any help to make sure this change is correct would be appreciated!
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: John Stultz <john.stultz@linaro.org>
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index 077af1d..57fbcc1 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -139,49 +139,32 @@
* Interface to RTC framework
*/
-#ifdef CONFIG_RTC_INTF_DEV
-
-/*
- * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
- */
-static int ds1305_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
+static int ds1305_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct ds1305 *ds1305 = dev_get_drvdata(dev);
u8 buf[2];
- int status = -ENOIOCTLCMD;
+ long err = -EINVAL;
buf[0] = DS1305_WRITE | DS1305_CONTROL;
buf[1] = ds1305->ctrl[0];
- switch (cmd) {
- case RTC_AIE_OFF:
- status = 0;
- if (!(buf[1] & DS1305_AEI0))
- goto done;
- buf[1] &= ~DS1305_AEI0;
- break;
-
- case RTC_AIE_ON:
- status = 0;
+ if (enabled) {
if (ds1305->ctrl[0] & DS1305_AEI0)
goto done;
buf[1] |= DS1305_AEI0;
- break;
+ } else {
+ if (!(buf[1] & DS1305_AEI0))
+ goto done;
+ buf[1] &= ~DS1305_AEI0;
}
- if (status == 0) {
- status = spi_write_then_read(ds1305->spi, buf, sizeof buf,
- NULL, 0);
- if (status >= 0)
- ds1305->ctrl[0] = buf[1];
- }
-
+ err = spi_write_then_read(ds1305->spi, buf, sizeof buf, NULL, 0);
+ if (err >= 0)
+ ds1305->ctrl[0] = buf[1];
done:
- return status;
+ return err;
+
}
-#else
-#define ds1305_ioctl NULL
-#endif
/*
* Get/set of date and time is pretty normal.
@@ -460,12 +443,12 @@
#endif
static const struct rtc_class_ops ds1305_ops = {
- .ioctl = ds1305_ioctl,
.read_time = ds1305_get_time,
.set_time = ds1305_set_time,
.read_alarm = ds1305_get_alarm,
.set_alarm = ds1305_set_alarm,
.proc = ds1305_proc,
+ .alarm_irq_enable = ds1305_alarm_irq_enable,
};
static void ds1305_work(struct work_struct *work)