doc-rst: linux_tv: don't use uppercases for syscall sections
On the syscall conversions, we used uppercase for the sections,
but this is too bold. So, convert them to Camel Case, as it
looks visually better.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/Documentation/linux_tv/media/dvb/audio-bilingual-channel-select.rst b/Documentation/linux_tv/media/dvb/audio-bilingual-channel-select.rst
index dda1695..841c975 100644
--- a/Documentation/linux_tv/media/dvb/audio-bilingual-channel-select.rst
+++ b/Documentation/linux_tv/media/dvb/audio-bilingual-channel-select.rst
@@ -6,18 +6,19 @@
AUDIO_BILINGUAL_CHANNEL_SELECT
==============================
-NAME
+Name
----
AUDIO_BILINGUAL_CHANNEL_SELECT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Select the output format of the audio (mono left/right, stereo).
-DESCRIPTION
+Description
-----------
This ioctl is obsolete. Do not use in new drivers. It has been replaced
@@ -55,7 +56,7 @@
for bilingual streams if possible.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-channel-select.rst b/Documentation/linux_tv/media/dvb/audio-channel-select.rst
index f7f9766..f2dd799 100644
--- a/Documentation/linux_tv/media/dvb/audio-channel-select.rst
+++ b/Documentation/linux_tv/media/dvb/audio-channel-select.rst
@@ -6,18 +6,19 @@
AUDIO_CHANNEL_SELECT
====================
-NAME
+Name
----
AUDIO_CHANNEL_SELECT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_CHANNEL_SELECT, audio_channel_select_t)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Select the output format of the audio (mono left/right, stereo).
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To control a V4L2 decoder use the
@@ -54,7 +55,7 @@
possible.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-clear-buffer.rst b/Documentation/linux_tv/media/dvb/audio-clear-buffer.rst
index 97cb3d9..a576c6b 100644
--- a/Documentation/linux_tv/media/dvb/audio-clear-buffer.rst
+++ b/Documentation/linux_tv/media/dvb/audio-clear-buffer.rst
@@ -6,18 +6,19 @@
AUDIO_CLEAR_BUFFER
==================
-NAME
+Name
----
AUDIO_CLEAR_BUFFER
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,14 +39,14 @@
- Equals AUDIO_CLEAR_BUFFER for this command.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to clear all software and hardware
buffers of the audio decoder device.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-continue.rst b/Documentation/linux_tv/media/dvb/audio-continue.rst
index 1f3d5c3..b513a39 100644
--- a/Documentation/linux_tv/media/dvb/audio-continue.rst
+++ b/Documentation/linux_tv/media/dvb/audio-continue.rst
@@ -6,18 +6,19 @@
AUDIO_CONTINUE
==============
-NAME
+Name
----
AUDIO_CONTINUE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_CONTINUE)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,14 +39,14 @@
- Equals AUDIO_CONTINUE for this command.
-DESCRIPTION
+Description
-----------
This ioctl restarts the decoding and playing process previously paused
with AUDIO_PAUSE command.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-fclose.rst b/Documentation/linux_tv/media/dvb/audio-fclose.rst
index 80d9cde..e515fb3 100644
--- a/Documentation/linux_tv/media/dvb/audio-fclose.rst
+++ b/Documentation/linux_tv/media/dvb/audio-fclose.rst
@@ -6,18 +6,19 @@
DVB audio close()
=================
-NAME
+Name
----
DVB audio close()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int close(int fd)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -32,13 +33,13 @@
- File descriptor returned by a previous call to open().
-DESCRIPTION
+Description
-----------
This system call closes a previously opened audio device.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/audio-fopen.rst b/Documentation/linux_tv/media/dvb/audio-fopen.rst
index 6596d64..46a1595 100644
--- a/Documentation/linux_tv/media/dvb/audio-fopen.rst
+++ b/Documentation/linux_tv/media/dvb/audio-fopen.rst
@@ -6,18 +6,19 @@
DVB audio open()
================
-NAME
+Name
----
DVB audio open()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int open(const char *deviceName, int flags)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -58,7 +59,7 @@
- (blocking mode is the default)
-DESCRIPTION
+Description
-----------
This system call opens a named audio device (e.g.
@@ -76,7 +77,7 @@
AUDIO_GET_STATUS. All other call will return with an error code.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/audio-fwrite.rst b/Documentation/linux_tv/media/dvb/audio-fwrite.rst
index 9aa9583..f930705 100644
--- a/Documentation/linux_tv/media/dvb/audio-fwrite.rst
+++ b/Documentation/linux_tv/media/dvb/audio-fwrite.rst
@@ -6,18 +6,19 @@
DVB audio write()
=================
-NAME
+Name
----
DVB audio write()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: size_t write(int fd, const void *buf, size_t count)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Size of buf.
-DESCRIPTION
+Description
-----------
This system call can only be used if AUDIO_SOURCE_MEMORY is selected
@@ -54,7 +55,7 @@
implied by count.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/audio-get-capabilities.rst b/Documentation/linux_tv/media/dvb/audio-get-capabilities.rst
index 32e55bb..8b6fdc6 100644
--- a/Documentation/linux_tv/media/dvb/audio-get-capabilities.rst
+++ b/Documentation/linux_tv/media/dvb/audio-get-capabilities.rst
@@ -6,18 +6,19 @@
AUDIO_GET_CAPABILITIES
======================
-NAME
+Name
----
AUDIO_GET_CAPABILITIES
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_GET_CAPABILITIES, unsigned int *cap)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- Returns a bit array of supported sound formats.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to tell us about the decoding
capabilities of the audio hardware.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-get-pts.rst b/Documentation/linux_tv/media/dvb/audio-get-pts.rst
index a8e2ef5..246c78c 100644
--- a/Documentation/linux_tv/media/dvb/audio-get-pts.rst
+++ b/Documentation/linux_tv/media/dvb/audio-get-pts.rst
@@ -6,18 +6,19 @@
AUDIO_GET_PTS
=============
-NAME
+Name
----
AUDIO_GET_PTS
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_GET_PTS, __u64 *pts)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -49,7 +50,7 @@
decoded frame or the last PTS extracted by the PES parser.
-DESCRIPTION
+Description
-----------
This ioctl is obsolete. Do not use in new drivers. If you need this
@@ -60,7 +61,7 @@
timestamp.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-get-status.rst b/Documentation/linux_tv/media/dvb/audio-get-status.rst
index b9a2850..b0a550a 100644
--- a/Documentation/linux_tv/media/dvb/audio-get-status.rst
+++ b/Documentation/linux_tv/media/dvb/audio-get-status.rst
@@ -6,18 +6,19 @@
AUDIO_GET_STATUS
================
-NAME
+Name
----
AUDIO_GET_STATUS
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_GET_STATUS, struct audio_status *status)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- Returns the current state of Audio Device.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to return the current state of the
Audio Device.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-pause.rst b/Documentation/linux_tv/media/dvb/audio-pause.rst
index 8b1517b..86652c3 100644
--- a/Documentation/linux_tv/media/dvb/audio-pause.rst
+++ b/Documentation/linux_tv/media/dvb/audio-pause.rst
@@ -6,18 +6,19 @@
AUDIO_PAUSE
===========
-NAME
+Name
----
AUDIO_PAUSE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_PAUSE)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,7 +39,7 @@
- Equals AUDIO_PAUSE for this command.
-DESCRIPTION
+Description
-----------
This ioctl call suspends the audio stream being played. Decoding and
@@ -46,7 +47,7 @@
playing process of the audio stream using AUDIO_CONTINUE command.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-play.rst b/Documentation/linux_tv/media/dvb/audio-play.rst
index 22bd350..1af7083 100644
--- a/Documentation/linux_tv/media/dvb/audio-play.rst
+++ b/Documentation/linux_tv/media/dvb/audio-play.rst
@@ -6,18 +6,19 @@
AUDIO_PLAY
==========
-NAME
+Name
----
AUDIO_PLAY
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_PLAY)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,14 +39,14 @@
- Equals AUDIO_PLAY for this command.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to start playing an audio stream
from the selected source.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-select-source.rst b/Documentation/linux_tv/media/dvb/audio-select-source.rst
index 2242e6f..3e873d9 100644
--- a/Documentation/linux_tv/media/dvb/audio-select-source.rst
+++ b/Documentation/linux_tv/media/dvb/audio-select-source.rst
@@ -6,18 +6,19 @@
AUDIO_SELECT_SOURCE
===================
-NAME
+Name
----
AUDIO_SELECT_SOURCE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_SELECT_SOURCE, audio_stream_source_t source)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Indicates the source that shall be used for the Audio stream.
-DESCRIPTION
+Description
-----------
This ioctl call informs the audio device which source shall be used for
@@ -53,7 +54,7 @@
through the write command.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-attributes.rst b/Documentation/linux_tv/media/dvb/audio-set-attributes.rst
index 820c8b2..43ff5027 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-attributes.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-attributes.rst
@@ -6,18 +6,19 @@
AUDIO_SET_ATTRIBUTES
====================
-NAME
+Name
----
AUDIO_SET_ATTRIBUTES
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES, audio_attributes_t attr )
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- audio attributes according to section ??
-DESCRIPTION
+Description
-----------
This ioctl is intended for DVD playback and allows you to set certain
information about the audio stream.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-av-sync.rst b/Documentation/linux_tv/media/dvb/audio-set-av-sync.rst
index 3f5ac9a..4ecfb75 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-av-sync.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-av-sync.rst
@@ -6,18 +6,19 @@
AUDIO_SET_AV_SYNC
=================
-NAME
+Name
----
AUDIO_SET_AV_SYNC
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_SET_AV_SYNC, boolean state)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -54,14 +55,14 @@
- FALSE AV-sync OFF
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to turn ON or OFF A/V
synchronization.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-bypass-mode.rst b/Documentation/linux_tv/media/dvb/audio-set-bypass-mode.rst
index 9377342..b21d142e 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-bypass-mode.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-bypass-mode.rst
@@ -6,18 +6,19 @@
AUDIO_SET_BYPASS_MODE
=====================
-NAME
+Name
----
AUDIO_SET_BYPASS_MODE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_SET_BYPASS_MODE, boolean mode)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -55,7 +56,7 @@
- FALSE Bypass is enabled
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to bypass the Audio decoder and
@@ -65,7 +66,7 @@
the hardware can handle it.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-ext-id.rst b/Documentation/linux_tv/media/dvb/audio-set-ext-id.rst
index 38a2552..1b5b889 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-ext-id.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-ext-id.rst
@@ -6,18 +6,19 @@
AUDIO_SET_EXT_ID
================
-NAME
+Name
----
AUDIO_SET_EXT_ID
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = AUDIO_SET_EXT_ID, int id)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- audio sub_stream_id
-DESCRIPTION
+Description
-----------
This ioctl can be used to set the extension id for MPEG streams in DVD
playback. Only the first 3 bits are recognized.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-id.rst b/Documentation/linux_tv/media/dvb/audio-set-id.rst
index 60eeee0..fed99ea 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-id.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-id.rst
@@ -6,18 +6,19 @@
AUDIO_SET_ID
============
-NAME
+Name
----
AUDIO_SET_ID
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_SET_ID, int id)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- audio sub-stream id
-DESCRIPTION
+Description
-----------
This ioctl selects which sub-stream is to be decoded if a program or
@@ -56,7 +57,7 @@
recognized.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-karaoke.rst b/Documentation/linux_tv/media/dvb/audio-set-karaoke.rst
index 2813822..ebb2d41 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-karaoke.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-karaoke.rst
@@ -6,18 +6,19 @@
AUDIO_SET_KARAOKE
=================
-NAME
+Name
----
AUDIO_SET_KARAOKE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = AUDIO_SET_KARAOKE, audio_karaoke_t *karaoke)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- karaoke settings according to section ??.
-DESCRIPTION
+Description
-----------
This ioctl allows one to set the mixer settings for a karaoke DVD.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-mixer.rst b/Documentation/linux_tv/media/dvb/audio-set-mixer.rst
index 8d5a6f3..ce4b2a6 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-mixer.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-mixer.rst
@@ -6,18 +6,19 @@
AUDIO_SET_MIXER
===============
-NAME
+Name
----
AUDIO_SET_MIXER
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_SET_MIXER, audio_mixer_t *mix)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- mixer settings.
-DESCRIPTION
+Description
-----------
This ioctl lets you adjust the mixer settings of the audio decoder.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-mute.rst b/Documentation/linux_tv/media/dvb/audio-set-mute.rst
index a002d0d..a246926 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-mute.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-mute.rst
@@ -6,18 +6,19 @@
AUDIO_SET_MUTE
==============
-NAME
+Name
----
AUDIO_SET_MUTE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_SET_MUTE, boolean state)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -54,7 +55,7 @@
- FALSE Audio Un-mute
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To control a V4L2 decoder use the
@@ -65,7 +66,7 @@
currently being played.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-set-streamtype.rst b/Documentation/linux_tv/media/dvb/audio-set-streamtype.rst
index a971d43..4b13c9b 100644
--- a/Documentation/linux_tv/media/dvb/audio-set-streamtype.rst
+++ b/Documentation/linux_tv/media/dvb/audio-set-streamtype.rst
@@ -6,18 +6,19 @@
AUDIO_SET_STREAMTYPE
====================
-NAME
+Name
----
AUDIO_SET_STREAMTYPE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = AUDIO_SET_STREAMTYPE, int type)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- stream type
-DESCRIPTION
+Description
-----------
This ioctl tells the driver which kind of audio stream to expect. This
@@ -52,7 +53,7 @@
AC3.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/audio-stop.rst b/Documentation/linux_tv/media/dvb/audio-stop.rst
index 558ff2b..d943097 100644
--- a/Documentation/linux_tv/media/dvb/audio-stop.rst
+++ b/Documentation/linux_tv/media/dvb/audio-stop.rst
@@ -6,18 +6,19 @@
AUDIO_STOP
==========
-NAME
+Name
----
AUDIO_STOP
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = AUDIO_STOP)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,14 +39,14 @@
- Equals AUDIO_STOP for this command.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Audio Device to stop playing the current
stream.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-fclose.rst b/Documentation/linux_tv/media/dvb/ca-fclose.rst
index a093e8d..16d7a1e 100644
--- a/Documentation/linux_tv/media/dvb/ca-fclose.rst
+++ b/Documentation/linux_tv/media/dvb/ca-fclose.rst
@@ -6,18 +6,19 @@
DVB CA close()
==============
-NAME
+Name
----
DVB CA close()
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int close(int fd)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -32,13 +33,13 @@
- File descriptor returned by a previous call to open().
-DESCRIPTION
+Description
-----------
This system call closes a previously opened audio device.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/ca-fopen.rst b/Documentation/linux_tv/media/dvb/ca-fopen.rst
index a9bf45a..f284461 100644
--- a/Documentation/linux_tv/media/dvb/ca-fopen.rst
+++ b/Documentation/linux_tv/media/dvb/ca-fopen.rst
@@ -6,18 +6,19 @@
DVB CA open()
=============
-NAME
+Name
----
DVB CA open()
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int open(const char *deviceName, int flags)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -58,7 +59,7 @@
- (blocking mode is the default)
-DESCRIPTION
+Description
-----------
This system call opens a named ca device (e.g. /dev/ost/ca) for
@@ -75,7 +76,7 @@
the device in this mode will fail, and an error code will be returned.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/ca-get-cap.rst b/Documentation/linux_tv/media/dvb/ca-get-cap.rst
index b026d47..891fbf2 100644
--- a/Documentation/linux_tv/media/dvb/ca-get-cap.rst
+++ b/Documentation/linux_tv/media/dvb/ca-get-cap.rst
@@ -6,18 +6,19 @@
CA_GET_CAP
==========
-NAME
+Name
----
CA_GET_CAP
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_GET_CAP, ca_caps_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-get-descr-info.rst b/Documentation/linux_tv/media/dvb/ca-get-descr-info.rst
index 446afe8..cf8e824 100644
--- a/Documentation/linux_tv/media/dvb/ca-get-descr-info.rst
+++ b/Documentation/linux_tv/media/dvb/ca-get-descr-info.rst
@@ -6,18 +6,19 @@
CA_GET_DESCR_INFO
=================
-NAME
+Name
----
CA_GET_DESCR_INFO
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_GET_DESCR_INFO, ca_descr_info_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-get-msg.rst b/Documentation/linux_tv/media/dvb/ca-get-msg.rst
index 44c944a..56004d5 100644
--- a/Documentation/linux_tv/media/dvb/ca-get-msg.rst
+++ b/Documentation/linux_tv/media/dvb/ca-get-msg.rst
@@ -6,18 +6,19 @@
CA_GET_MSG
==========
-NAME
+Name
----
CA_GET_MSG
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_GET_MSG, ca_msg_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-get-slot-info.rst b/Documentation/linux_tv/media/dvb/ca-get-slot-info.rst
index e1e5803..9fea28c 100644
--- a/Documentation/linux_tv/media/dvb/ca-get-slot-info.rst
+++ b/Documentation/linux_tv/media/dvb/ca-get-slot-info.rst
@@ -6,18 +6,19 @@
CA_GET_SLOT_INFO
================
-NAME
+Name
----
CA_GET_SLOT_INFO
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_GET_SLOT_INFO, ca_slot_info_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-reset.rst b/Documentation/linux_tv/media/dvb/ca-reset.rst
index ff58c62..d5a5008 100644
--- a/Documentation/linux_tv/media/dvb/ca-reset.rst
+++ b/Documentation/linux_tv/media/dvb/ca-reset.rst
@@ -6,18 +6,19 @@
CA_RESET
========
-NAME
+Name
----
CA_RESET
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_RESET)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,13 +39,13 @@
- Equals CA_RESET for this command.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-send-msg.rst b/Documentation/linux_tv/media/dvb/ca-send-msg.rst
index 9d9b8d2..18974e6 100644
--- a/Documentation/linux_tv/media/dvb/ca-send-msg.rst
+++ b/Documentation/linux_tv/media/dvb/ca-send-msg.rst
@@ -6,18 +6,19 @@
CA_SEND_MSG
===========
-NAME
+Name
----
CA_SEND_MSG
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_SEND_MSG, ca_msg_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-set-descr.rst b/Documentation/linux_tv/media/dvb/ca-set-descr.rst
index e992dd5..293e6da 100644
--- a/Documentation/linux_tv/media/dvb/ca-set-descr.rst
+++ b/Documentation/linux_tv/media/dvb/ca-set-descr.rst
@@ -6,18 +6,19 @@
CA_SET_DESCR
============
-NAME
+Name
----
CA_SET_DESCR
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_SET_DESCR, ca_descr_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/ca-set-pid.rst b/Documentation/linux_tv/media/dvb/ca-set-pid.rst
index e7e3891..5afa2fa 100644
--- a/Documentation/linux_tv/media/dvb/ca-set-pid.rst
+++ b/Documentation/linux_tv/media/dvb/ca-set-pid.rst
@@ -6,18 +6,19 @@
CA_SET_PID
==========
-NAME
+Name
----
CA_SET_PID
-SYNOPSIS
+
+Synopsis
--------
.. cpp:function:: int ioctl(fd, int request = CA_SET_PID, ca_pid_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-add-pid.rst b/Documentation/linux_tv/media/dvb/dmx-add-pid.rst
index 36bca4f..37f5ee4 100644
--- a/Documentation/linux_tv/media/dvb/dmx-add-pid.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-add-pid.rst
@@ -6,18 +6,19 @@
DMX_ADD_PID
===========
-NAME
+Name
----
DMX_ADD_PID
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = DMX_ADD_PID, __u16 *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- PID number to be filtered.
-DESCRIPTION
+Description
-----------
This ioctl call allows to add multiple PIDs to a transport stream filter
@@ -52,7 +53,7 @@
DMX_OUT_TSDEMUX_TAP.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-fclose.rst b/Documentation/linux_tv/media/dvb/dmx-fclose.rst
index 7889d0b..e442881 100644
--- a/Documentation/linux_tv/media/dvb/dmx-fclose.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-fclose.rst
@@ -6,18 +6,19 @@
DVB demux close()
=================
-NAME
+Name
----
DVB demux close()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int close(int fd)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -32,14 +33,14 @@
- File descriptor returned by a previous call to open().
-DESCRIPTION
+Description
-----------
This system call deactivates and deallocates a filter that was
previously allocated via the open() call.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/dmx-fopen.rst b/Documentation/linux_tv/media/dvb/dmx-fopen.rst
index 1e1dbc5..7e640fa 100644
--- a/Documentation/linux_tv/media/dvb/dmx-fopen.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-fopen.rst
@@ -6,18 +6,19 @@
DVB demux open()
================
-NAME
+Name
----
DVB demux open()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int open(const char *deviceName, int flags)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -53,7 +54,7 @@
- (blocking mode is the default)
-DESCRIPTION
+Description
-----------
This system call, used with a device name of /dev/dvb/adapter0/demux0,
@@ -74,7 +75,7 @@
using the F_SETFL command of the fcntl system call.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/dmx-fread.rst b/Documentation/linux_tv/media/dvb/dmx-fread.rst
index 55d9bc7..92f7a06 100644
--- a/Documentation/linux_tv/media/dvb/dmx-fread.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-fread.rst
@@ -6,18 +6,19 @@
DVB demux read()
================
-NAME
+Name
----
DVB demux read()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: size_t read(int fd, void *buf, size_t count)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Size of buf.
-DESCRIPTION
+Description
-----------
This system call returns filtered data, which might be section or PES
@@ -53,7 +54,7 @@
implied by count.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/dmx-fwrite.rst b/Documentation/linux_tv/media/dvb/dmx-fwrite.rst
index f397436..8d26322 100644
--- a/Documentation/linux_tv/media/dvb/dmx-fwrite.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-fwrite.rst
@@ -6,18 +6,19 @@
DVB demux write()
=================
-NAME
+Name
----
DVB demux write()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: ssize_t write(int fd, const void *buf, size_t count)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Size of buf.
-DESCRIPTION
+Description
-----------
This system call is only provided by the logical device
@@ -55,7 +56,7 @@
The amount of data to be transferred is implied by count.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/dmx-get-caps.rst b/Documentation/linux_tv/media/dvb/dmx-get-caps.rst
index 8c8ae48..20e3d6e 100644
--- a/Documentation/linux_tv/media/dvb/dmx-get-caps.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-get-caps.rst
@@ -6,18 +6,19 @@
DMX_GET_CAPS
============
-NAME
+Name
----
DMX_GET_CAPS
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = DMX_GET_CAPS, dmx_caps_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-get-event.rst b/Documentation/linux_tv/media/dvb/dmx-get-event.rst
index ab2ab2e..81a7c7f 100644
--- a/Documentation/linux_tv/media/dvb/dmx-get-event.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-get-event.rst
@@ -6,18 +6,19 @@
DMX_GET_EVENT
=============
-NAME
+Name
----
DMX_GET_EVENT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_GET_EVENT, struct dmx_event *ev)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Pointer to the location where the event is to be stored.
-DESCRIPTION
+Description
-----------
This ioctl call returns an event if available. If an event is not
@@ -54,7 +55,7 @@
event becomes available.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-get-pes-pids.rst b/Documentation/linux_tv/media/dvb/dmx-get-pes-pids.rst
index cf0d8a6..8b1fbf5 100644
--- a/Documentation/linux_tv/media/dvb/dmx-get-pes-pids.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-get-pes-pids.rst
@@ -6,18 +6,19 @@
DMX_GET_PES_PIDS
================
-NAME
+Name
----
DMX_GET_PES_PIDS
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = DMX_GET_PES_PIDS, __u16[5])
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-get-stc.rst b/Documentation/linux_tv/media/dvb/dmx-get-stc.rst
index 35dd691..616c745 100644
--- a/Documentation/linux_tv/media/dvb/dmx-get-stc.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-get-stc.rst
@@ -6,18 +6,19 @@
DMX_GET_STC
===========
-NAME
+Name
----
DMX_GET_STC
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_GET_STC, struct dmx_stc *stc)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Pointer to the location where the stc is to be stored.
-DESCRIPTION
+Description
-----------
This ioctl call returns the current value of the system time counter
@@ -55,7 +56,7 @@
the real 90kHz STC value is stc->stc / stc->base .
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-remove-pid.rst b/Documentation/linux_tv/media/dvb/dmx-remove-pid.rst
index 859e1a1..ed1a49c 100644
--- a/Documentation/linux_tv/media/dvb/dmx-remove-pid.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-remove-pid.rst
@@ -6,18 +6,19 @@
DMX_REMOVE_PID
==============
-NAME
+Name
----
DMX_REMOVE_PID
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = DMX_REMOVE_PID, __u16 *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- PID of the PES filter to be removed.
-DESCRIPTION
+Description
-----------
This ioctl call allows to remove a PID when multiple PIDs are set on a
@@ -53,7 +54,7 @@
DMX_SET_PES_FILTER or DMX_ADD_PID.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-set-buffer-size.rst b/Documentation/linux_tv/media/dvb/dmx-set-buffer-size.rst
index cf6b32f..012b9e9 100644
--- a/Documentation/linux_tv/media/dvb/dmx-set-buffer-size.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-set-buffer-size.rst
@@ -6,18 +6,19 @@
DMX_SET_BUFFER_SIZE
===================
-NAME
+Name
----
DMX_SET_BUFFER_SIZE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_SET_BUFFER_SIZE, unsigned long size)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Size of circular buffer.
-DESCRIPTION
+Description
-----------
This ioctl call is used to set the size of the circular buffer used for
@@ -53,7 +54,7 @@
used.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-set-filter.rst b/Documentation/linux_tv/media/dvb/dmx-set-filter.rst
index 0aad102..d079d8b 100644
--- a/Documentation/linux_tv/media/dvb/dmx-set-filter.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-set-filter.rst
@@ -6,18 +6,19 @@
DMX_SET_FILTER
==============
-NAME
+Name
----
DMX_SET_FILTER
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_SET_FILTER, struct dmx_sct_filter_params *params)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Pointer to structure containing filter parameters.
-DESCRIPTION
+Description
-----------
This ioctl call sets up a filter according to the filter and mask
@@ -59,7 +60,7 @@
will be canceled, and the receive buffer will be flushed.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-set-pes-filter.rst b/Documentation/linux_tv/media/dvb/dmx-set-pes-filter.rst
index 3dccd7c..910869e 100644
--- a/Documentation/linux_tv/media/dvb/dmx-set-pes-filter.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-set-pes-filter.rst
@@ -6,18 +6,19 @@
DMX_SET_PES_FILTER
==================
-NAME
+Name
----
DMX_SET_PES_FILTER
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Pointer to structure containing filter parameters.
-DESCRIPTION
+Description
-----------
This ioctl call sets up a PES filter according to the parameters
@@ -53,7 +54,7 @@
capability is supported.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-set-source.rst b/Documentation/linux_tv/media/dvb/dmx-set-source.rst
index 1304532..7aa4dfe 100644
--- a/Documentation/linux_tv/media/dvb/dmx-set-source.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-set-source.rst
@@ -6,18 +6,19 @@
DMX_SET_SOURCE
==============
-NAME
+Name
----
DMX_SET_SOURCE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = DMX_SET_SOURCE, dmx_source_t *)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Undocumented.
-DESCRIPTION
+Description
-----------
This ioctl is undocumented. Documentation is welcome.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-start.rst b/Documentation/linux_tv/media/dvb/dmx-start.rst
index c62e2ad..cc316d0 100644
--- a/Documentation/linux_tv/media/dvb/dmx-start.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-start.rst
@@ -6,18 +6,19 @@
DMX_START
=========
-NAME
+Name
----
DMX_START
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_START)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,14 +39,14 @@
- Equals DMX_START for this command.
-DESCRIPTION
+Description
-----------
This ioctl call is used to start the actual filtering operation defined
via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/dmx-stop.rst b/Documentation/linux_tv/media/dvb/dmx-stop.rst
index ff9df40..f9157dd 100644
--- a/Documentation/linux_tv/media/dvb/dmx-stop.rst
+++ b/Documentation/linux_tv/media/dvb/dmx-stop.rst
@@ -6,18 +6,19 @@
DMX_STOP
========
-NAME
+Name
----
DMX_STOP
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl( int fd, int request = DMX_STOP)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,7 +39,7 @@
- Equals DMX_STOP for this command.
-DESCRIPTION
+Description
-----------
This ioctl call is used to stop the actual filtering operation defined
@@ -46,7 +47,7 @@
started via the DMX_START command.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst
index 7ddbce6..7bd02ac 100644
--- a/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-recv-slave-reply.rst
@@ -6,18 +6,19 @@
ioctl FE_DISEQC_RECV_SLAVE_REPLY
********************************
-NAME
+Name
====
FE_DISEQC_RECV_SLAVE_REPLY - Receives reply from a DiSEqC 2.0 command
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct dvb_diseqc_slave_reply *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
:ref:`dvb_diseqc_slave_reply <dvb-diseqc-slave-reply>`
-DESCRIPTION
+Description
===========
Receives reply from a DiSEqC 2.0 command.
@@ -73,7 +74,8 @@
- Return from ioctl after timeout ms with errorcode when no message
was received
-RETURN VALUE
+
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst
index 236c25c..cab1570 100644
--- a/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-reset-overload.rst
@@ -6,18 +6,19 @@
ioctl FE_DISEQC_RESET_OVERLOAD
******************************
-NAME
+Name
====
FE_DISEQC_RESET_OVERLOAD - Restores the power to the antenna subsystem, if it was powered off due - to power overload.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, NULL )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -27,7 +28,7 @@
FE_DISEQC_RESET_OVERLOAD
-DESCRIPTION
+Description
===========
If the bus has been automatically powered off due to power overload,
@@ -36,7 +37,7 @@
is manually powered off. Not all DVB adapters support this ioctl.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst
index 806ee5a..c022cc2 100644
--- a/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-send-burst.rst
@@ -6,18 +6,19 @@
ioctl FE_DISEQC_SEND_BURST
**************************
-NAME
+Name
====
FE_DISEQC_SEND_BURST - Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection.
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl( int fd, int request, enum fe_sec_mini_cmd *tone )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
pointer to enum :ref:`fe_sec_mini_cmd <fe-sec-mini-cmd>`
-DESCRIPTION
+Description
===========
This ioctl is used to set the generation of a 22kHz tone burst for mini
@@ -74,7 +75,8 @@
- Sends a mini-DiSEqC 22kHz '1' Data Burst to select satellite-B
-RETURN VALUE
+
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst
index 519e91b..dc83b4f 100644
--- a/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst
+++ b/Documentation/linux_tv/media/dvb/fe-diseqc-send-master-cmd.rst
@@ -6,18 +6,19 @@
ioctl FE_DISEQC_SEND_MASTER_CMD
*******************************
-NAME
+Name
====
FE_DISEQC_SEND_MASTER_CMD - Sends a DiSEqC command
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct dvb_diseqc_master_cmd *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,13 +32,13 @@
:ref:`dvb_diseqc_master_cmd <dvb-diseqc-master-cmd>`
-DESCRIPTION
+Description
===========
Sends a DiSEqC command to the antenna subsystem.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/linux_tv/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
index 9435f45..4b60a42 100644
--- a/Documentation/linux_tv/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
+++ b/Documentation/linux_tv/media/dvb/fe-dishnetwork-send-legacy-cmd.rst
@@ -6,18 +6,19 @@
FE_DISHNETWORK_SEND_LEGACY_CMD
******************************
-NAME
+Name
====
FE_DISHNETWORK_SEND_LEGACY_CMD
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl(int fd, int request = FE_DISHNETWORK_SEND_LEGACY_CMD, unsigned long cmd)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -32,7 +33,7 @@
- sends the specified raw cmd to the dish via DISEqC.
-DESCRIPTION
+Description
===========
WARNING: This is a very obscure legacy command, used only at stv0299
@@ -45,7 +46,7 @@
dishes were already legacy in 2004.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst
index 27f4982..de99bf5 100644
--- a/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst
+++ b/Documentation/linux_tv/media/dvb/fe-enable-high-lnb-voltage.rst
@@ -6,18 +6,19 @@
ioctl FE_ENABLE_HIGH_LNB_VOLTAGE
********************************
-NAME
+Name
====
FE_ENABLE_HIGH_LNB_VOLTAGE - Select output DC level between normal LNBf voltages or higher LNBf - voltages.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, unsigned int high )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -35,7 +36,7 @@
to compensate for long antenna cables.
-DESCRIPTION
+Description
===========
Select output DC level between normal LNBf voltages or higher LNBf
@@ -43,7 +44,7 @@
voltages.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-get-event.rst b/Documentation/linux_tv/media/dvb/fe-get-event.rst
index 3d85810..79beb1b 100644
--- a/Documentation/linux_tv/media/dvb/fe-get-event.rst
+++ b/Documentation/linux_tv/media/dvb/fe-get-event.rst
@@ -6,18 +6,19 @@
FE_GET_EVENT
************
-NAME
+Name
====
FE_GET_EVENT
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl(int fd, int request = QPSK_GET_EVENT, struct dvb_frontend_event *ev)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -49,7 +50,7 @@
- if any, is to be stored.
-DESCRIPTION
+Description
===========
This ioctl call returns a frontend event if available. If an event is
@@ -59,7 +60,7 @@
an event becomes available.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-get-frontend.rst b/Documentation/linux_tv/media/dvb/fe-get-frontend.rst
index 7084070..fdf0d14 100644
--- a/Documentation/linux_tv/media/dvb/fe-get-frontend.rst
+++ b/Documentation/linux_tv/media/dvb/fe-get-frontend.rst
@@ -6,18 +6,19 @@
FE_GET_FRONTEND
***************
-NAME
+Name
====
FE_GET_FRONTEND
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl(int fd, int request = FE_GET_FRONTEND, struct dvb_frontend_parameters *p)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -45,14 +46,14 @@
- Points to parameters for tuning operation.
-DESCRIPTION
+Description
===========
This ioctl call queries the currently effective frontend parameters. For
this command, read-only access to the device is sufficient.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-get-info.rst b/Documentation/linux_tv/media/dvb/fe-get-info.rst
index 1efb242..8ef1ed7 100644
--- a/Documentation/linux_tv/media/dvb/fe-get-info.rst
+++ b/Documentation/linux_tv/media/dvb/fe-get-info.rst
@@ -6,18 +6,19 @@
ioctl FE_GET_INFO
*****************
-NAME
+Name
====
FE_GET_INFO - Query DVB frontend capabilities and returns information about the - front-end. This call only requires read-only access to the device
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct dvb_frontend_info *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
:ref:`dvb_frontend_info <dvb-frontend-info>`
-DESCRIPTION
+Description
===========
All DVB frontend devices support the ``FE_GET_INFO`` ioctl. It is used
@@ -418,7 +419,8 @@
- The frontend can stop spurious TS data output
-RETURN VALUE
+
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-get-property.rst b/Documentation/linux_tv/media/dvb/fe-get-property.rst
index c470105..749daaf 100644
--- a/Documentation/linux_tv/media/dvb/fe-get-property.rst
+++ b/Documentation/linux_tv/media/dvb/fe-get-property.rst
@@ -6,18 +6,19 @@
ioctl FE_SET_PROPERTY, FE_GET_PROPERTY
**************************************
-NAME
+Name
====
FE_SET_PROPERTY - FE_GET_PROPERTY - FE_SET_PROPERTY sets one or more frontend properties. - FE_GET_PROPERTY returns one or more frontend properties.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct dtv_properties *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
pointer to struct :ref:`dtv_properties <dtv-properties>`
-DESCRIPTION
+Description
===========
All DVB frontend devices support the ``FE_SET_PROPERTY`` and
@@ -59,7 +60,7 @@
- This call only requires read-only access to the device.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-read-ber.rst b/Documentation/linux_tv/media/dvb/fe-read-ber.rst
index 39cf656..3262441 100644
--- a/Documentation/linux_tv/media/dvb/fe-read-ber.rst
+++ b/Documentation/linux_tv/media/dvb/fe-read-ber.rst
@@ -6,19 +6,19 @@
FE_READ_BER
***********
-Description
------------
+Name
+====
-This ioctl call returns the bit error rate for the signal currently
-received/demodulated by the front-end. For this command, read-only
-access to the device is sufficient.
+FE_READ_BER
-SYNOPSIS
+Synopsis
+========
.. c:function:: int ioctl(int fd, int request = FE_READ_BER, uint32_t *ber)
+
Arguments
-----------
+=========
.. flat-table::
:header-rows: 0
@@ -44,8 +44,16 @@
- The bit error rate is stored into \*ber.
+Description
+===========
+
+This ioctl call returns the bit error rate for the signal currently
+received/demodulated by the front-end. For this command, read-only
+access to the device is sufficient.
+
+
Return Value
-------------
+============
On success 0 is returned, on error -1 and the ``errno`` variable is set
appropriately. The generic error codes are described at the
diff --git a/Documentation/linux_tv/media/dvb/fe-read-signal-strength.rst b/Documentation/linux_tv/media/dvb/fe-read-signal-strength.rst
index 7f6f47f..fcaadcb 100644
--- a/Documentation/linux_tv/media/dvb/fe-read-signal-strength.rst
+++ b/Documentation/linux_tv/media/dvb/fe-read-signal-strength.rst
@@ -6,18 +6,19 @@
FE_READ_SIGNAL_STRENGTH
***********************
-NAME
+Name
====
FE_READ_SIGNAL_STRENGTH
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl( int fd, int request = FE_READ_SIGNAL_STRENGTH, uint16_t *strength)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -46,7 +47,7 @@
- The signal strength value is stored into \*strength.
-DESCRIPTION
+Description
===========
This ioctl call returns the signal strength value for the signal
@@ -54,7 +55,7 @@
to the device is sufficient.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-read-snr.rst b/Documentation/linux_tv/media/dvb/fe-read-snr.rst
index 3ecaeb8..837af2d 100644
--- a/Documentation/linux_tv/media/dvb/fe-read-snr.rst
+++ b/Documentation/linux_tv/media/dvb/fe-read-snr.rst
@@ -6,18 +6,19 @@
FE_READ_SNR
***********
-NAME
+Name
====
FE_READ_SNR
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl(int fd, int request = FE_READ_SNR, int16_t *snr)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -44,7 +45,7 @@
- The signal-to-noise ratio is stored into \*snr.
-DESCRIPTION
+Description
===========
This ioctl call returns the signal-to-noise ratio for the signal
@@ -52,7 +53,7 @@
to the device is sufficient.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-read-status.rst b/Documentation/linux_tv/media/dvb/fe-read-status.rst
index 697598d..544ce49 100644
--- a/Documentation/linux_tv/media/dvb/fe-read-status.rst
+++ b/Documentation/linux_tv/media/dvb/fe-read-status.rst
@@ -6,18 +6,19 @@
ioctl FE_READ_STATUS
********************
-NAME
+Name
====
FE_READ_STATUS - Returns status information about the front-end. This call only requires - read-only access to the device
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, unsigned int *status )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
:ref:`fe_status <fe-status>`.
-DESCRIPTION
+Description
===========
All DVB frontend devices support the ``FE_READ_STATUS`` ioctl. It is
@@ -125,7 +126,8 @@
- The frontend was reinitialized, application is recommended to
reset DiSEqC, tone and parameters
-RETURN VALUE
+
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-read-uncorrected-blocks.rst b/Documentation/linux_tv/media/dvb/fe-read-uncorrected-blocks.rst
index 31ec4c3..6b75384 100644
--- a/Documentation/linux_tv/media/dvb/fe-read-uncorrected-blocks.rst
+++ b/Documentation/linux_tv/media/dvb/fe-read-uncorrected-blocks.rst
@@ -6,18 +6,19 @@
FE_READ_UNCORRECTED_BLOCKS
**************************
-NAME
+Name
====
FE_READ_UNCORRECTED_BLOCKS
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl( int fd, int request =FE_READ_UNCORRECTED_BLOCKS, uint32_t *ublocks)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -46,7 +47,7 @@
- The total number of uncorrected blocks seen by the driver so far.
-DESCRIPTION
+Description
===========
This ioctl call returns the number of uncorrected blocks detected by the
@@ -56,7 +57,7 @@
sufficient.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst b/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst
index 1db22c4..411abcf 100644
--- a/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst
+++ b/Documentation/linux_tv/media/dvb/fe-set-frontend-tune-mode.rst
@@ -6,18 +6,19 @@
ioctl FE_SET_FRONTEND_TUNE_MODE
*******************************
-NAME
+Name
====
FE_SET_FRONTEND_TUNE_MODE - Allow setting tuner mode flags to the frontend.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, unsigned int flags )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -39,14 +40,14 @@
device is reopened read-write.
-DESCRIPTION
+Description
===========
Allow setting tuner mode flags to the frontend, between 0 (normal) or
FE_TUNE_MODE_ONESHOT mode
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-set-frontend.rst b/Documentation/linux_tv/media/dvb/fe-set-frontend.rst
index 06edd97..4e66da0 100644
--- a/Documentation/linux_tv/media/dvb/fe-set-frontend.rst
+++ b/Documentation/linux_tv/media/dvb/fe-set-frontend.rst
@@ -6,18 +6,19 @@
FE_SET_FRONTEND
***************
-NAME
+Name
====
FE_SET_FRONTEND
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl(int fd, int request = FE_SET_FRONTEND, struct dvb_frontend_parameters *p)
-ARGUMENTS
+Arguments
=========
.. flat-table::
@@ -45,7 +46,7 @@
- Points to parameters for tuning operation.
-DESCRIPTION
+Description
===========
This ioctl call starts a tuning operation using specified parameters.
@@ -59,7 +60,7 @@
requires read/write access to the device.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-set-tone.rst b/Documentation/linux_tv/media/dvb/fe-set-tone.rst
index 18677f2..12aedb6 100644
--- a/Documentation/linux_tv/media/dvb/fe-set-tone.rst
+++ b/Documentation/linux_tv/media/dvb/fe-set-tone.rst
@@ -6,18 +6,19 @@
ioctl FE_SET_TONE
*****************
-NAME
+Name
====
FE_SET_TONE - Sets/resets the generation of the continuous 22kHz tone.
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl( int fd, int request, enum fe_sec_tone_mode *tone )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
pointer to enum :ref:`fe_sec_tone_mode <fe-sec-tone-mode>`
-DESCRIPTION
+Description
===========
This ioctl is used to set the generation of the continuous 22kHz tone.
@@ -81,7 +82,8 @@
- Don't send a 22kHz tone to the antenna (except if the
FE_DISEQC_* ioctls are called)
-RETURN VALUE
+
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/fe-set-voltage.rst b/Documentation/linux_tv/media/dvb/fe-set-voltage.rst
index 4fd30ee..ec8dbf4 100644
--- a/Documentation/linux_tv/media/dvb/fe-set-voltage.rst
+++ b/Documentation/linux_tv/media/dvb/fe-set-voltage.rst
@@ -6,18 +6,19 @@
ioctl FE_SET_VOLTAGE
********************
-NAME
+Name
====
FE_SET_VOLTAGE - Allow setting the DC level sent to the antenna subsystem.
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl( int fd, int request, enum fe_sec_voltage *voltage )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -33,7 +34,7 @@
:ref:`fe_sec_voltage <fe-sec-voltage>`.
-DESCRIPTION
+Description
===========
This ioctl allows to set the DC voltage level sent through the antenna
@@ -54,7 +55,7 @@
recommended.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/frontend_f_close.rst b/Documentation/linux_tv/media/dvb/frontend_f_close.rst
index 7946673..5cce9262 100644
--- a/Documentation/linux_tv/media/dvb/frontend_f_close.rst
+++ b/Documentation/linux_tv/media/dvb/frontend_f_close.rst
@@ -6,12 +6,13 @@
DVB frontend close()
********************
-NAME
+Name
====
fe-close - Close a frontend device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,14 +23,14 @@
.. cpp:function:: int close( int fd )
-ARGUMENTS
+Arguments
=========
``fd``
File descriptor returned by :ref:`open() <func-open>`.
-DESCRIPTION
+Description
===========
This system call closes a previously opened front-end device. After
@@ -37,7 +38,7 @@
down automatically.
-RETURN VALUE
+Return Value
============
The function returns 0 on success, -1 on failure and the ``errno`` is
diff --git a/Documentation/linux_tv/media/dvb/frontend_f_open.rst b/Documentation/linux_tv/media/dvb/frontend_f_open.rst
index 97ca34b..e0c5534 100644
--- a/Documentation/linux_tv/media/dvb/frontend_f_open.rst
+++ b/Documentation/linux_tv/media/dvb/frontend_f_open.rst
@@ -6,12 +6,13 @@
DVB frontend open()
*******************
-NAME
+Name
====
fe-open - Open a frontend device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: int open( const char *device_name, int flags )
-ARGUMENTS
+Arguments
=========
``device_name``
@@ -44,7 +45,7 @@
Other flags have no effect.
-DESCRIPTION
+Description
===========
This system call opens a named frontend device
@@ -70,7 +71,7 @@
that possible.
-RETURN VALUE
+Return Value
============
On success :ref:`open() <frontend_f_open>` returns the new file descriptor.
diff --git a/Documentation/linux_tv/media/dvb/net-add-if.rst b/Documentation/linux_tv/media/dvb/net-add-if.rst
index dc9735d..2b990d0 100644
--- a/Documentation/linux_tv/media/dvb/net-add-if.rst
+++ b/Documentation/linux_tv/media/dvb/net-add-if.rst
@@ -6,18 +6,19 @@
ioctl NET_ADD_IF
****************
-NAME
+Name
====
NET_ADD_IF - Creates a new network interface for a given Packet ID.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct dvb_net_if *net_if )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
pointer to struct :ref:`dvb_net_if <dvb-net-if>`
-DESCRIPTION
+Description
===========
The NET_ADD_IF ioctl system call selects the Packet ID (PID) that
@@ -82,7 +83,7 @@
``DVB_NET_FEEDTYPE_ULE`` for ULE encoding.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/net-get-if.rst b/Documentation/linux_tv/media/dvb/net-get-if.rst
index 16dfe78..92b8841 100644
--- a/Documentation/linux_tv/media/dvb/net-get-if.rst
+++ b/Documentation/linux_tv/media/dvb/net-get-if.rst
@@ -6,18 +6,19 @@
ioctl NET_GET_IF
****************
-NAME
+Name
====
NET_GET_IF - Read the configuration data of an interface created via - :ref:`NET_ADD_IF <net>`.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct dvb_net_if *net_if )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
pointer to struct :ref:`dvb_net_if <dvb-net-if>`
-DESCRIPTION
+Description
===========
The NET_GET_IF ioctl uses the interface number given by the struct
@@ -41,7 +42,7 @@
the ``errno`` with ``EINVAL`` error code.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/net-remove-if.rst b/Documentation/linux_tv/media/dvb/net-remove-if.rst
index c417783..d374c1d6 100644
--- a/Documentation/linux_tv/media/dvb/net-remove-if.rst
+++ b/Documentation/linux_tv/media/dvb/net-remove-if.rst
@@ -6,18 +6,19 @@
ioctl NET_REMOVE_IF
*******************
-NAME
+Name
====
NET_REMOVE_IF - Removes a network interface.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, int ifnum )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,14 +31,14 @@
number of the interface to be removed
-DESCRIPTION
+Description
===========
The NET_REMOVE_IF ioctl deletes an interface previously created via
:ref:`NET_ADD_IF <net>`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-clear-buffer.rst b/Documentation/linux_tv/media/dvb/video-clear-buffer.rst
index e6d2825..dd227ad 100644
--- a/Documentation/linux_tv/media/dvb/video-clear-buffer.rst
+++ b/Documentation/linux_tv/media/dvb/video-clear-buffer.rst
@@ -6,18 +6,19 @@
VIDEO_CLEAR_BUFFER
==================
-NAME
+Name
----
VIDEO_CLEAR_BUFFER
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_CLEAR_BUFFER)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,14 +39,14 @@
- Equals VIDEO_CLEAR_BUFFER for this command.
-DESCRIPTION
+Description
-----------
This ioctl call clears all video buffers in the driver and in the
decoder hardware.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-command.rst b/Documentation/linux_tv/media/dvb/video-command.rst
index 1743f40..42a98a4 100644
--- a/Documentation/linux_tv/media/dvb/video-command.rst
+++ b/Documentation/linux_tv/media/dvb/video-command.rst
@@ -6,18 +6,19 @@
VIDEO_COMMAND
=============
-NAME
+Name
----
VIDEO_COMMAND
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_COMMAND, struct video_command *cmd)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Commands the decoder.
-DESCRIPTION
+Description
-----------
This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
@@ -57,7 +58,7 @@
more information.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-continue.rst b/Documentation/linux_tv/media/dvb/video-continue.rst
index 453a87d..2a6444a 100644
--- a/Documentation/linux_tv/media/dvb/video-continue.rst
+++ b/Documentation/linux_tv/media/dvb/video-continue.rst
@@ -6,18 +6,19 @@
VIDEO_CONTINUE
==============
-NAME
+Name
----
VIDEO_CONTINUE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_CONTINUE)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,7 +39,7 @@
- Equals VIDEO_CONTINUE for this command.
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To control a V4L2 decoder use the
@@ -48,7 +49,7 @@
stream which was played before a call to VIDEO_FREEZE was made.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-fast-forward.rst b/Documentation/linux_tv/media/dvb/video-fast-forward.rst
index 586a23b..0b3a27a 100644
--- a/Documentation/linux_tv/media/dvb/video-fast-forward.rst
+++ b/Documentation/linux_tv/media/dvb/video-fast-forward.rst
@@ -6,18 +6,19 @@
VIDEO_FAST_FORWARD
==================
-NAME
+Name
----
VIDEO_FAST_FORWARD
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_FAST_FORWARD, int nFrames)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- The number of frames to skip.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Video Device to skip decoding of N number of
@@ -52,7 +53,7 @@
selected.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-fclose.rst b/Documentation/linux_tv/media/dvb/video-fclose.rst
index e986737..b4dd5ea 100644
--- a/Documentation/linux_tv/media/dvb/video-fclose.rst
+++ b/Documentation/linux_tv/media/dvb/video-fclose.rst
@@ -6,18 +6,19 @@
dvb video close()
=================
-NAME
+Name
----
dvb video close()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int close(int fd)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -32,13 +33,13 @@
- File descriptor returned by a previous call to open().
-DESCRIPTION
+Description
-----------
This system call closes a previously opened video device.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/video-fopen.rst b/Documentation/linux_tv/media/dvb/video-fopen.rst
index 3c30fef..31d4d62 100644
--- a/Documentation/linux_tv/media/dvb/video-fopen.rst
+++ b/Documentation/linux_tv/media/dvb/video-fopen.rst
@@ -6,18 +6,19 @@
dvb video open()
================
-NAME
+Name
----
dvb video open()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int open(const char *deviceName, int flags)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -58,7 +59,7 @@
- (blocking mode is the default)
-DESCRIPTION
+Description
-----------
This system call opens a named video device (e.g.
@@ -78,7 +79,7 @@
return an error code.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/video-freeze.rst b/Documentation/linux_tv/media/dvb/video-freeze.rst
index 8fbc783..12e04df 100644
--- a/Documentation/linux_tv/media/dvb/video-freeze.rst
+++ b/Documentation/linux_tv/media/dvb/video-freeze.rst
@@ -6,18 +6,19 @@
VIDEO_FREEZE
============
-NAME
+Name
----
VIDEO_FREEZE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_FREEZE)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,7 +39,7 @@
- Equals VIDEO_FREEZE for this command.
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To control a V4L2 decoder use the
@@ -52,7 +53,7 @@
until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-fwrite.rst b/Documentation/linux_tv/media/dvb/video-fwrite.rst
index f56c89c..da03db4 100644
--- a/Documentation/linux_tv/media/dvb/video-fwrite.rst
+++ b/Documentation/linux_tv/media/dvb/video-fwrite.rst
@@ -6,18 +6,19 @@
dvb video write()
=================
-NAME
+Name
----
dvb video write()
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: size_t write(int fd, const void *buf, size_t count)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Size of buf.
-DESCRIPTION
+Description
-----------
This system call can only be used if VIDEO_SOURCE_MEMORY is selected
@@ -54,7 +55,7 @@
available. The amount of data to be transferred is implied by count.
-RETURN VALUE
+Return Value
------------
.. flat-table::
diff --git a/Documentation/linux_tv/media/dvb/video-get-capabilities.rst b/Documentation/linux_tv/media/dvb/video-get-capabilities.rst
index 5666ae7..5515dd4 100644
--- a/Documentation/linux_tv/media/dvb/video-get-capabilities.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-capabilities.rst
@@ -6,18 +6,19 @@
VIDEO_GET_CAPABILITIES
======================
-NAME
+Name
----
VIDEO_GET_CAPABILITIES
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, unsigned int *cap)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Pointer to a location where to store the capability information.
-DESCRIPTION
+Description
-----------
This ioctl call asks the video device about its decoding capabilities.
@@ -52,7 +53,7 @@
defines in section ??.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-event.rst b/Documentation/linux_tv/media/dvb/video-get-event.rst
index b08ca14..d434599 100644
--- a/Documentation/linux_tv/media/dvb/video-get-event.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-event.rst
@@ -6,18 +6,19 @@
VIDEO_GET_EVENT
===============
-NAME
+Name
----
VIDEO_GET_EVENT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_GET_EVENT, struct video_event *ev)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Points to the location where the event, if any, is to be stored.
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To get events from a V4L2 decoder
@@ -62,7 +63,7 @@
for this ioctl call.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-frame-count.rst b/Documentation/linux_tv/media/dvb/video-get-frame-count.rst
index 97ec058..a55f7a1 100644
--- a/Documentation/linux_tv/media/dvb/video-get-frame-count.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-frame-count.rst
@@ -6,18 +6,19 @@
VIDEO_GET_FRAME_COUNT
=====================
-NAME
+Name
----
VIDEO_GET_FRAME_COUNT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_GET_FRAME_COUNT, __u64 *pts)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -45,7 +46,7 @@
started.
-DESCRIPTION
+Description
-----------
This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
@@ -56,7 +57,7 @@
frames since the decoder was started.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-frame-rate.rst b/Documentation/linux_tv/media/dvb/video-get-frame-rate.rst
index 62a85be..a137b65 100644
--- a/Documentation/linux_tv/media/dvb/video-get-frame-rate.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-frame-rate.rst
@@ -6,18 +6,19 @@
VIDEO_GET_FRAME_RATE
====================
-NAME
+Name
----
VIDEO_GET_FRAME_RATE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_GET_FRAME_RATE, unsigned int *rate)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Returns the framerate in number of frames per 1000 seconds.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Video Device to return the current framerate.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-navi.rst b/Documentation/linux_tv/media/dvb/video-get-navi.rst
index 95dea51..ccb2552 100644
--- a/Documentation/linux_tv/media/dvb/video-get-navi.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-navi.rst
@@ -6,18 +6,19 @@
VIDEO_GET_NAVI
==============
-NAME
+Name
----
VIDEO_GET_NAVI
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_GET_NAVI , video_navi_pack_t *navipack)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- PCI or DSI pack (private stream 2) according to section ??.
-DESCRIPTION
+Description
-----------
This ioctl returns navigational information from the DVD stream. This is
@@ -52,7 +53,7 @@
hardware.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-pts.rst b/Documentation/linux_tv/media/dvb/video-get-pts.rst
index f56e02a..c1ad957 100644
--- a/Documentation/linux_tv/media/dvb/video-get-pts.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-pts.rst
@@ -6,18 +6,19 @@
VIDEO_GET_PTS
=============
-NAME
+Name
----
VIDEO_GET_PTS
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_GET_PTS, __u64 *pts)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -49,7 +50,7 @@
decoded frame or the last PTS extracted by the PES parser.
-DESCRIPTION
+Description
-----------
This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
@@ -60,7 +61,7 @@
timestamp.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-size.rst b/Documentation/linux_tv/media/dvb/video-get-size.rst
index cbdf976..70fb266 100644
--- a/Documentation/linux_tv/media/dvb/video-get-size.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-size.rst
@@ -6,18 +6,19 @@
VIDEO_GET_SIZE
==============
-NAME
+Name
----
VIDEO_GET_SIZE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_GET_SIZE, video_size_t *size)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- Returns the size and aspect ratio.
-DESCRIPTION
+Description
-----------
This ioctl returns the size and aspect ratio.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-get-status.rst b/Documentation/linux_tv/media/dvb/video-get-status.rst
index 25344bf..5fd5b37 100644
--- a/Documentation/linux_tv/media/dvb/video-get-status.rst
+++ b/Documentation/linux_tv/media/dvb/video-get-status.rst
@@ -6,18 +6,19 @@
VIDEO_GET_STATUS
================
-NAME
+Name
----
VIDEO_GET_STATUS
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_GET_STATUS, struct video_status *status)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- Returns the current status of the Video Device.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Video Device to return the current status of
the device.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-play.rst b/Documentation/linux_tv/media/dvb/video-play.rst
index 18252d9..103d0ad 100644
--- a/Documentation/linux_tv/media/dvb/video-play.rst
+++ b/Documentation/linux_tv/media/dvb/video-play.rst
@@ -6,18 +6,19 @@
VIDEO_PLAY
==========
-NAME
+Name
----
VIDEO_PLAY
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_PLAY)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -38,7 +39,7 @@
- Equals VIDEO_PLAY for this command.
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To control a V4L2 decoder use the
@@ -48,7 +49,7 @@
from the selected source.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-select-source.rst b/Documentation/linux_tv/media/dvb/video-select-source.rst
index 2e76af3..f03c544 100644
--- a/Documentation/linux_tv/media/dvb/video-select-source.rst
+++ b/Documentation/linux_tv/media/dvb/video-select-source.rst
@@ -6,18 +6,19 @@
VIDEO_SELECT_SOURCE
===================
-NAME
+Name
----
VIDEO_SELECT_SOURCE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SELECT_SOURCE, video_stream_source_t source)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Indicates which source shall be used for the Video stream.
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. This ioctl was also supported by the
@@ -56,7 +57,7 @@
selected, the data is fed to the video device through the write command.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-attributes.rst b/Documentation/linux_tv/media/dvb/video-set-attributes.rst
index 6de9378..9de0d9c 100644
--- a/Documentation/linux_tv/media/dvb/video-set-attributes.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-attributes.rst
@@ -6,18 +6,19 @@
VIDEO_SET_ATTRIBUTES
====================
-NAME
+Name
----
VIDEO_SET_ATTRIBUTES
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE ,video_attributes_t vattr)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- video attributes according to section ??.
-DESCRIPTION
+Description
-----------
This ioctl is intended for DVD playback and allows you to set certain
@@ -53,7 +54,7 @@
playback.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-blank.rst b/Documentation/linux_tv/media/dvb/video-set-blank.rst
index 62b46b8..d8b94c9 100644
--- a/Documentation/linux_tv/media/dvb/video-set-blank.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-blank.rst
@@ -6,18 +6,19 @@
VIDEO_SET_BLANK
===============
-NAME
+Name
----
VIDEO_SET_BLANK
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_BLANK, boolean mode)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -49,13 +50,13 @@
- FALSE: Show last decoded frame.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Video Device to blank out the picture.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-display-format.rst b/Documentation/linux_tv/media/dvb/video-set-display-format.rst
index 7aec080..c1fb7c7 100644
--- a/Documentation/linux_tv/media/dvb/video-set-display-format.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-display-format.rst
@@ -6,18 +6,19 @@
VIDEO_SET_DISPLAY_FORMAT
========================
-NAME
+Name
----
VIDEO_SET_DISPLAY_FORMAT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_DISPLAY_FORMAT, video_display_format_t format)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- Selects the video format to be used.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Video Device to select the video format to be
applied by the MPEG chip on the video.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-format.rst b/Documentation/linux_tv/media/dvb/video-set-format.rst
index af126d2..257a3c2 100644
--- a/Documentation/linux_tv/media/dvb/video-set-format.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-format.rst
@@ -6,18 +6,19 @@
VIDEO_SET_FORMAT
================
-NAME
+Name
----
VIDEO_SET_FORMAT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_FORMAT, video_format_t format)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- video format of TV as defined in section ??.
-DESCRIPTION
+Description
-----------
This ioctl sets the screen format (aspect ratio) of the connected output
@@ -52,7 +53,7 @@
accordingly.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-highlight.rst b/Documentation/linux_tv/media/dvb/video-set-highlight.rst
index d8628d2..6ff11af 100644
--- a/Documentation/linux_tv/media/dvb/video-set-highlight.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-highlight.rst
@@ -6,18 +6,19 @@
VIDEO_SET_HIGHLIGHT
===================
-NAME
+Name
----
VIDEO_SET_HIGHLIGHT
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT ,video_highlight_t *vhilite)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- SPU Highlight information according to section ??.
-DESCRIPTION
+Description
-----------
This ioctl sets the SPU highlight information for the menu access of a
DVD.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-id.rst b/Documentation/linux_tv/media/dvb/video-set-id.rst
index 31ca41f..61993ab 100644
--- a/Documentation/linux_tv/media/dvb/video-set-id.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-id.rst
@@ -6,18 +6,19 @@
VIDEO_SET_ID
============
-NAME
+Name
----
VIDEO_SET_ID
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_SET_ID, int id)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,14 +45,14 @@
- video sub-stream id
-DESCRIPTION
+Description
-----------
This ioctl selects which sub-stream is to be decoded if a program or
system stream is sent to the video device.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-spu-palette.rst b/Documentation/linux_tv/media/dvb/video-set-spu-palette.rst
index b3b727f..ae9e0da 100644
--- a/Documentation/linux_tv/media/dvb/video-set-spu-palette.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-spu-palette.rst
@@ -6,18 +6,19 @@
VIDEO_SET_SPU_PALETTE
=====================
-NAME
+Name
----
VIDEO_SET_SPU_PALETTE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE, video_spu_palette_t *palette )
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,13 +45,13 @@
- SPU palette according to section ??.
-DESCRIPTION
+Description
-----------
This ioctl sets the SPU color palette.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-spu.rst b/Documentation/linux_tv/media/dvb/video-set-spu.rst
index d00d0b5..ce28605 100644
--- a/Documentation/linux_tv/media/dvb/video-set-spu.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-spu.rst
@@ -6,18 +6,19 @@
VIDEO_SET_SPU
=============
-NAME
+Name
----
VIDEO_SET_SPU
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_SPU , video_spu_t *spu)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -45,14 +46,14 @@
??.
-DESCRIPTION
+Description
-----------
This ioctl activates or deactivates SPU decoding in a DVD input stream.
It can only be used, if the driver is able to handle a DVD stream.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-streamtype.rst b/Documentation/linux_tv/media/dvb/video-set-streamtype.rst
index 6875ff8..a205536 100644
--- a/Documentation/linux_tv/media/dvb/video-set-streamtype.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-streamtype.rst
@@ -6,18 +6,19 @@
VIDEO_SET_STREAMTYPE
====================
-NAME
+Name
----
VIDEO_SET_STREAMTYPE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, int type)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- stream type
-DESCRIPTION
+Description
-----------
This ioctl tells the driver which kind of stream to expect being written
@@ -52,7 +53,7 @@
drivers might not support this call and always expect PES.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-set-system.rst b/Documentation/linux_tv/media/dvb/video-set-system.rst
index 7fcd1a1..f84906a 100644
--- a/Documentation/linux_tv/media/dvb/video-set-system.rst
+++ b/Documentation/linux_tv/media/dvb/video-set-system.rst
@@ -6,18 +6,19 @@
VIDEO_SET_SYSTEM
================
-NAME
+Name
----
VIDEO_SET_SYSTEM
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SET_SYSTEM , video_system_t system)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- video system of TV output.
-DESCRIPTION
+Description
-----------
This ioctl sets the television output format. The format (see section
@@ -53,7 +54,7 @@
return an error.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-slowmotion.rst b/Documentation/linux_tv/media/dvb/video-slowmotion.rst
index 6472abb..c8cc85a 100644
--- a/Documentation/linux_tv/media/dvb/video-slowmotion.rst
+++ b/Documentation/linux_tv/media/dvb/video-slowmotion.rst
@@ -6,18 +6,19 @@
VIDEO_SLOWMOTION
================
-NAME
+Name
----
VIDEO_SLOWMOTION
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_SLOWMOTION, int nFrames)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- The number of times to repeat each frame.
-DESCRIPTION
+Description
-----------
This ioctl call asks the video device to repeat decoding frames N number
@@ -52,7 +53,7 @@
selected.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-stillpicture.rst b/Documentation/linux_tv/media/dvb/video-stillpicture.rst
index 93c9c30..053cdbb 100644
--- a/Documentation/linux_tv/media/dvb/video-stillpicture.rst
+++ b/Documentation/linux_tv/media/dvb/video-stillpicture.rst
@@ -6,18 +6,19 @@
VIDEO_STILLPICTURE
==================
-NAME
+Name
----
VIDEO_STILLPICTURE
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_STILLPICTURE, struct video_still_picture *sp)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Pointer to a location where an I-frame and size is stored.
-DESCRIPTION
+Description
-----------
This ioctl call asks the Video Device to display a still picture
@@ -52,7 +53,7 @@
NULL, then the current displayed still picture is blanked.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-stop.rst b/Documentation/linux_tv/media/dvb/video-stop.rst
index 2dbf464..4e7fbab 100644
--- a/Documentation/linux_tv/media/dvb/video-stop.rst
+++ b/Documentation/linux_tv/media/dvb/video-stop.rst
@@ -6,18 +6,19 @@
VIDEO_STOP
==========
-NAME
+Name
----
VIDEO_STOP
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(fd, int request = VIDEO_STOP, boolean mode)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -54,7 +55,7 @@
- FALSE: Show last decoded frame.
-DESCRIPTION
+Description
-----------
This ioctl is for DVB devices only. To control a V4L2 decoder use the
@@ -65,7 +66,7 @@
or displaying the last decoded frame.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/dvb/video-try-command.rst b/Documentation/linux_tv/media/dvb/video-try-command.rst
index b30cfcd..be21fb0 100644
--- a/Documentation/linux_tv/media/dvb/video-try-command.rst
+++ b/Documentation/linux_tv/media/dvb/video-try-command.rst
@@ -6,18 +6,19 @@
VIDEO_TRY_COMMAND
=================
-NAME
+Name
----
VIDEO_TRY_COMMAND
-SYNOPSIS
+
+Synopsis
--------
.. c:function:: int ioctl(int fd, int request = VIDEO_TRY_COMMAND, struct video_command *cmd)
-ARGUMENTS
+Arguments
---------
.. flat-table::
@@ -44,7 +45,7 @@
- Try a decoder command.
-DESCRIPTION
+Description
-----------
This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders
@@ -57,7 +58,7 @@
for more information.
-RETURN VALUE
+Return Value
------------
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/mediactl/media-func-close.rst b/Documentation/linux_tv/media/mediactl/media-func-close.rst
index 7ec0baa..3f3d9bb 100644
--- a/Documentation/linux_tv/media/mediactl/media-func-close.rst
+++ b/Documentation/linux_tv/media/mediactl/media-func-close.rst
@@ -6,12 +6,13 @@
media close()
*************
-NAME
+Name
====
media-close - Close a media device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,21 +23,21 @@
.. cpp:function:: int close( int fd )
-ARGUMENTS
+Arguments
=========
``fd``
File descriptor returned by :ref:`open() <func-open>`.
-DESCRIPTION
+Description
===========
Closes the media device. Resources associated with the file descriptor
are freed. The device configuration remain unchanged.
-RETURN VALUE
+Return Value
============
:ref:`close() <func-close>` returns 0 on success. On error, -1 is returned, and
diff --git a/Documentation/linux_tv/media/mediactl/media-func-ioctl.rst b/Documentation/linux_tv/media/mediactl/media-func-ioctl.rst
index 0d8f706..1b28e2d 100644
--- a/Documentation/linux_tv/media/mediactl/media-func-ioctl.rst
+++ b/Documentation/linux_tv/media/mediactl/media-func-ioctl.rst
@@ -6,12 +6,13 @@
media ioctl()
*************
-NAME
+Name
====
media-ioctl - Control a media device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: int ioctl( int fd, int request, void *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -36,7 +37,7 @@
Pointer to a request-specific structure.
-DESCRIPTION
+Description
===========
The :ref:`ioctl() <func-ioctl>` function manipulates media device parameters.
@@ -52,7 +53,7 @@
:ref:`media-user-func`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/mediactl/media-func-open.rst b/Documentation/linux_tv/media/mediactl/media-func-open.rst
index 353114f..43b9ddc 100644
--- a/Documentation/linux_tv/media/mediactl/media-func-open.rst
+++ b/Documentation/linux_tv/media/mediactl/media-func-open.rst
@@ -6,12 +6,13 @@
media open()
************
-NAME
+Name
====
media-open - Open a media device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: int open( const char *device_name, int flags )
-ARGUMENTS
+Arguments
=========
``device_name``
@@ -33,7 +34,7 @@
Other flags have no effect.
-DESCRIPTION
+Description
===========
To open a media device applications call :ref:`open() <func-open>` with the
@@ -45,7 +46,7 @@
EBADF.
-RETURN VALUE
+Return Value
============
:ref:`open() <func-open>` returns the new file descriptor on success. On error,
diff --git a/Documentation/linux_tv/media/mediactl/media-ioc-device-info.rst b/Documentation/linux_tv/media/mediactl/media-ioc-device-info.rst
index 52fe981..cee8312 100644
--- a/Documentation/linux_tv/media/mediactl/media-ioc-device-info.rst
+++ b/Documentation/linux_tv/media/mediactl/media-ioc-device-info.rst
@@ -6,18 +6,19 @@
ioctl MEDIA_IOC_DEVICE_INFO
***************************
-NAME
+Name
====
MEDIA_IOC_DEVICE_INFO - Query device information
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct media_device_info *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
All media devices must support the ``MEDIA_IOC_DEVICE_INFO`` ioctl. To
@@ -133,7 +134,7 @@
vary across reboots or device unplug/replug.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/mediactl/media-ioc-enum-entities.rst b/Documentation/linux_tv/media/mediactl/media-ioc-enum-entities.rst
index 5d11572..f11c45a 100644
--- a/Documentation/linux_tv/media/mediactl/media-ioc-enum-entities.rst
+++ b/Documentation/linux_tv/media/mediactl/media-ioc-enum-entities.rst
@@ -6,18 +6,19 @@
ioctl MEDIA_IOC_ENUM_ENTITIES
*****************************
-NAME
+Name
====
MEDIA_IOC_ENUM_ENTITIES - Enumerate entities and their properties
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct media_entity_desc *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of an entity, applications set the id field of a
@@ -183,7 +184,7 @@
-
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/mediactl/media-ioc-enum-links.rst b/Documentation/linux_tv/media/mediactl/media-ioc-enum-links.rst
index 88bf10b..cc3cc3d2 100644
--- a/Documentation/linux_tv/media/mediactl/media-ioc-enum-links.rst
+++ b/Documentation/linux_tv/media/mediactl/media-ioc-enum-links.rst
@@ -6,18 +6,19 @@
ioctl MEDIA_IOC_ENUM_LINKS
**************************
-NAME
+Name
====
MEDIA_IOC_ENUM_LINKS - Enumerate all pads and links for a given entity
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct media_links_enum *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To enumerate pads and/or links for a given entity, applications set the
@@ -159,7 +160,7 @@
- Link flags, see :ref:`media-link-flag` for more details.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/mediactl/media-ioc-g-topology.rst b/Documentation/linux_tv/media/mediactl/media-ioc-g-topology.rst
index 34d4601..badcdf6 100644
--- a/Documentation/linux_tv/media/mediactl/media-ioc-g-topology.rst
+++ b/Documentation/linux_tv/media/mediactl/media-ioc-g-topology.rst
@@ -6,18 +6,19 @@
ioctl MEDIA_IOC_G_TOPOLOGY
**************************
-NAME
+Name
====
MEDIA_IOC_G_TOPOLOGY - Enumerate the graph topology and graph element properties
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct media_v2_topology *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The typical usage of this ioctl is to call it twice. On the first call,
@@ -410,7 +411,7 @@
this array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/mediactl/media-ioc-setup-link.rst b/Documentation/linux_tv/media/mediactl/media-ioc-setup-link.rst
index f02edbc..57ae5bc 100644
--- a/Documentation/linux_tv/media/mediactl/media-ioc-setup-link.rst
+++ b/Documentation/linux_tv/media/mediactl/media-ioc-setup-link.rst
@@ -6,18 +6,19 @@
ioctl MEDIA_IOC_SETUP_LINK
**************************
-NAME
+Name
====
MEDIA_IOC_SETUP_LINK - Modify the properties of a link
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct media_link_desc *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To change link properties applications fill a struct
@@ -54,7 +55,7 @@
error code.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/func-close.rst b/Documentation/linux_tv/media/v4l/func-close.rst
index 81401cd..926a2cc 100644
--- a/Documentation/linux_tv/media/v4l/func-close.rst
+++ b/Documentation/linux_tv/media/v4l/func-close.rst
@@ -6,12 +6,13 @@
V4L2 close()
************
-NAME
+Name
====
v4l2-close - Close a V4L2 device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,14 +23,14 @@
.. cpp:function:: int close( int fd )
-ARGUMENTS
+Arguments
=========
``fd``
File descriptor returned by :ref:`open() <func-open>`.
-DESCRIPTION
+Description
===========
Closes the device. Any I/O in progress is terminated and resources
@@ -38,7 +39,7 @@
remain unchanged.
-RETURN VALUE
+Return Value
============
The function returns 0 on success, -1 on failure and the ``errno`` is
diff --git a/Documentation/linux_tv/media/v4l/func-ioctl.rst b/Documentation/linux_tv/media/v4l/func-ioctl.rst
index 91917e9..5632f48 100644
--- a/Documentation/linux_tv/media/v4l/func-ioctl.rst
+++ b/Documentation/linux_tv/media/v4l/func-ioctl.rst
@@ -6,12 +6,13 @@
V4L2 ioctl()
************
-NAME
+Name
====
v4l2-ioctl - Program a V4L2 device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: int ioctl( int fd, int request, void *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -36,7 +37,7 @@
Pointer to a function parameter, usually a structure.
-DESCRIPTION
+Description
===========
The :ref:`ioctl() <func-ioctl>` function is used to program V4L2 devices. The
@@ -50,7 +51,7 @@
specified in :ref:`user-func`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/func-mmap.rst b/Documentation/linux_tv/media/v4l/func-mmap.rst
index 01a45e2..3502c2a 100644
--- a/Documentation/linux_tv/media/v4l/func-mmap.rst
+++ b/Documentation/linux_tv/media/v4l/func-mmap.rst
@@ -6,12 +6,13 @@
V4L2 mmap()
***********
-NAME
+Name
====
v4l2-mmap - Map device memory into application address space
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -23,7 +24,7 @@
.. cpp:function:: void *mmap( void *start, size_t length, int prot, int flags, int fd, off_t offset )
-ARGUMENTS
+Arguments
=========
``start``
@@ -90,7 +91,7 @@
``mem_offset`` field for the multi-planar API.
-DESCRIPTION
+Description
===========
The :ref:`mmap() <func-mmap>` function asks to map ``length`` bytes starting at
@@ -106,7 +107,7 @@
To unmap buffers the :ref:`munmap() <func-munmap>` function is used.
-RETURN VALUE
+Return Value
============
On success :ref:`mmap() <func-mmap>` returns a pointer to the mapped buffer. On
diff --git a/Documentation/linux_tv/media/v4l/func-munmap.rst b/Documentation/linux_tv/media/v4l/func-munmap.rst
index a6e7a6d..c29c03f 100644
--- a/Documentation/linux_tv/media/v4l/func-munmap.rst
+++ b/Documentation/linux_tv/media/v4l/func-munmap.rst
@@ -6,12 +6,13 @@
V4L2 munmap()
*************
-NAME
+Name
====
v4l2-munmap - Unmap device memory
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -23,7 +24,7 @@
.. cpp:function:: int munmap( void *start, size_t length )
-ARGUMENTS
+Arguments
=========
``start``
@@ -39,14 +40,14 @@
multi-planar API.
-DESCRIPTION
+Description
===========
Unmaps a previously with the :ref:`mmap() <func-mmap>` function mapped
buffer and frees it, if possible.
-RETURN VALUE
+Return Value
============
On success :ref:`munmap() <func-munmap>` returns 0, on failure -1 and the
diff --git a/Documentation/linux_tv/media/v4l/func-open.rst b/Documentation/linux_tv/media/v4l/func-open.rst
index 152174e..06bcadc 100644
--- a/Documentation/linux_tv/media/v4l/func-open.rst
+++ b/Documentation/linux_tv/media/v4l/func-open.rst
@@ -6,12 +6,13 @@
V4L2 open()
***********
-NAME
+Name
====
v4l2-open - Open a V4L2 device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: int open( const char *device_name, int flags )
-ARGUMENTS
+Arguments
=========
``device_name``
@@ -43,7 +44,7 @@
Other flags have no effect.
-DESCRIPTION
+Description
===========
To open a V4L2 device applications call :ref:`open() <func-open>` with the
@@ -54,7 +55,7 @@
undefined state.
-RETURN VALUE
+Return Value
============
On success :ref:`open() <func-open>` returns the new file descriptor. On error
diff --git a/Documentation/linux_tv/media/v4l/func-poll.rst b/Documentation/linux_tv/media/v4l/func-poll.rst
index 8632e05..e6ceb71 100644
--- a/Documentation/linux_tv/media/v4l/func-poll.rst
+++ b/Documentation/linux_tv/media/v4l/func-poll.rst
@@ -6,12 +6,13 @@
V4L2 poll()
***********
-NAME
+Name
====
v4l2-poll - Wait for some event on a file descriptor
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,12 +23,12 @@
.. cpp:function:: int poll( struct pollfd *ufds, unsigned int nfds, int timeout )
-ARGUMENTS
+Arguments
=========
-DESCRIPTION
+Description
===========
With the :ref:`poll() <func-poll>` function applications can suspend execution
@@ -90,7 +91,7 @@
For more details see the :ref:`poll() <func-poll>` manual page.
-RETURN VALUE
+Return Value
============
On success, :ref:`poll() <func-poll>` returns the number structures which have
diff --git a/Documentation/linux_tv/media/v4l/func-read.rst b/Documentation/linux_tv/media/v4l/func-read.rst
index c4f0e8a..9a2aa521 100644
--- a/Documentation/linux_tv/media/v4l/func-read.rst
+++ b/Documentation/linux_tv/media/v4l/func-read.rst
@@ -6,12 +6,13 @@
V4L2 read()
***********
-NAME
+Name
====
v4l2-read - Read from a V4L2 device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: ssize_t read( int fd, void *buf, size_t count )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -32,7 +33,7 @@
``count``
-DESCRIPTION
+Description
===========
:ref:`read() <func-read>` attempts to read up to ``count`` bytes from file
@@ -92,7 +93,7 @@
For minimum requirements see :ref:`devices`.
-RETURN VALUE
+Return Value
============
On success, the number of bytes read is returned. It is not an error if
diff --git a/Documentation/linux_tv/media/v4l/func-select.rst b/Documentation/linux_tv/media/v4l/func-select.rst
index 34ade67..954dd00 100644
--- a/Documentation/linux_tv/media/v4l/func-select.rst
+++ b/Documentation/linux_tv/media/v4l/func-select.rst
@@ -6,12 +6,13 @@
V4L2 select()
*************
-NAME
+Name
====
v4l2-select - Synchronous I/O multiplexing
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -24,12 +25,12 @@
.. cpp:function:: int select( int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout )
-ARGUMENTS
+Arguments
=========
-DESCRIPTION
+Description
===========
With the :ref:`select() <func-select>` function applications can suspend
@@ -71,7 +72,7 @@
For more details see the :ref:`select() <func-select>` manual page.
-RETURN VALUE
+Return Value
============
On success, :ref:`select() <func-select>` returns the number of descriptors
diff --git a/Documentation/linux_tv/media/v4l/func-write.rst b/Documentation/linux_tv/media/v4l/func-write.rst
index 6609f19..a3bc9b2 100644
--- a/Documentation/linux_tv/media/v4l/func-write.rst
+++ b/Documentation/linux_tv/media/v4l/func-write.rst
@@ -6,12 +6,13 @@
V4L2 write()
************
-NAME
+Name
====
v4l2-write - Write to a V4L2 device
-SYNOPSIS
+
+Synopsis
========
.. code-block:: c
@@ -22,7 +23,7 @@
.. cpp:function:: ssize_t write( int fd, void *buf, size_t count )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -32,7 +33,7 @@
``count``
-DESCRIPTION
+Description
===========
:ref:`write() <func-write>` writes up to ``count`` bytes to the device
@@ -47,7 +48,7 @@
inserts a blank line instead.
-RETURN VALUE
+Return Value
============
On success, the number of bytes written are returned. Zero indicates
diff --git a/Documentation/linux_tv/media/v4l/vidioc-create-bufs.rst b/Documentation/linux_tv/media/v4l/vidioc-create-bufs.rst
index fe17919..abdc0b4 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-create-bufs.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-create-bufs.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_CREATE_BUFS
************************
-NAME
+Name
====
VIDIOC_CREATE_BUFS - Create buffers for Memory Mapped or User Pointer or DMA Buffer I/O
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_create_buffers *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl is used to create buffers for :ref:`memory mapped <mmap>`
@@ -130,7 +131,7 @@
must set the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-cropcap.rst b/Documentation/linux_tv/media/v4l/vidioc-cropcap.rst
index 17ae3aa..8dcbe6d 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-cropcap.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-cropcap.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_CROPCAP
********************
-NAME
+Name
====
VIDIOC_CROPCAP - Information about the video cropping and scaling abilities
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_cropcap *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Applications use this function to query the cropping limits, the pixel
@@ -154,7 +155,7 @@
- Height of the rectangle, in pixels.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/linux_tv/media/v4l/vidioc-dbg-g-chip-info.rst
index 913c6d4..efa911c 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-dbg-g-chip-info.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-dbg-g-chip-info.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_DBG_G_CHIP_INFO
****************************
-NAME
+Name
====
VIDIOC_DBG_G_CHIP_INFO - Identify the chips on a TV card
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_dbg_chip_info *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
**Note**
@@ -192,7 +193,7 @@
- Match the nth sub-device.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-dbg-g-register.rst b/Documentation/linux_tv/media/v4l/vidioc-dbg-g-register.rst
index 185a011..345aa32 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-dbg-g-register.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-dbg-g-register.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_DBG_G_REGISTER, VIDIOC_DBG_S_REGISTER
**************************************************
-NAME
+Name
====
VIDIOC_DBG_G_REGISTER - VIDIOC_DBG_S_REGISTER - Read or write hardware registers
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_dbg_register *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_dbg_register *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
**Note**
@@ -196,7 +197,7 @@
- Match the nth sub-device.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-decoder-cmd.rst b/Documentation/linux_tv/media/v4l/vidioc-decoder-cmd.rst
index bb6d9b8..2a36e91 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-decoder-cmd.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-decoder-cmd.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_DECODER_CMD, VIDIOC_TRY_DECODER_CMD
************************************************
-NAME
+Name
====
VIDIOC_DECODER_CMD - VIDIOC_TRY_DECODER_CMD - Execute an decoder command
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_decoder_cmd *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls control an audio/video (usually MPEG-) decoder.
@@ -255,7 +256,7 @@
flags are defined for this command.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-dqevent.rst b/Documentation/linux_tv/media/v4l/vidioc-dqevent.rst
index 850cb5e..73c0d5b 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-dqevent.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-dqevent.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_DQEVENT
********************
-NAME
+Name
====
VIDIOC_DQEVENT - Dequeue event
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_event *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Dequeue an event from a video device. No input is required for this
@@ -564,7 +565,7 @@
decoder.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-dv-timings-cap.rst b/Documentation/linux_tv/media/v4l/vidioc-dv-timings-cap.rst
index 61fef53..b56cdef 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-dv-timings-cap.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-dv-timings-cap.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_DV_TIMINGS_CAP, VIDIOC_SUBDEV_DV_TIMINGS_CAP
*********************************************************
-NAME
+Name
====
VIDIOC_DV_TIMINGS_CAP - VIDIOC_SUBDEV_DV_TIMINGS_CAP - The capabilities of the Digital Video receiver/transmitter
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_dv_timings_cap *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the capabilities of the DV receiver/transmitter applications
@@ -241,7 +242,7 @@
the standards set in the ``standards`` field.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-encoder-cmd.rst b/Documentation/linux_tv/media/v4l/vidioc-encoder-cmd.rst
index 1991014..69bd9b4 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-encoder-cmd.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-encoder-cmd.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENCODER_CMD, VIDIOC_TRY_ENCODER_CMD
************************************************
-NAME
+Name
====
VIDIOC_ENCODER_CMD - VIDIOC_TRY_ENCODER_CMD - Execute an encoder command
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_encoder_cmd *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls control an audio/video (usually MPEG-) encoder.
@@ -179,7 +180,7 @@
rather than immediately.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enum-dv-timings.rst b/Documentation/linux_tv/media/v4l/vidioc-enum-dv-timings.rst
index 41fa431..f0dd0c4 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enum-dv-timings.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enum-dv-timings.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUM_DV_TIMINGS, VIDIOC_SUBDEV_ENUM_DV_TIMINGS
***********************************************************
-NAME
+Name
====
VIDIOC_ENUM_DV_TIMINGS - VIDIOC_SUBDEV_ENUM_DV_TIMINGS - Enumerate supported Digital Video timings
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_enum_dv_timings *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
While some DV receivers or transmitters support a wide range of timings,
@@ -103,7 +104,7 @@
- The timings.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enum-fmt.rst b/Documentation/linux_tv/media/v4l/vidioc-enum-fmt.rst
index 3b935b0..257c624 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enum-fmt.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enum-fmt.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUM_FMT
*********************
-NAME
+Name
====
VIDIOC_ENUM_FMT - Enumerate image formats
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_fmtdesc *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To enumerate image formats applications initialize the ``type`` and
@@ -151,7 +152,7 @@
format instead for better performance.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enum-frameintervals.rst b/Documentation/linux_tv/media/v4l/vidioc-enum-frameintervals.rst
index 3336a16..5d5de53 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enum-frameintervals.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enum-frameintervals.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUM_FRAMEINTERVALS
********************************
-NAME
+Name
====
VIDIOC_ENUM_FRAMEINTERVALS - Enumerate frame intervals
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_frmivalenum *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -32,7 +33,7 @@
interval.
-DESCRIPTION
+Description
===========
This ioctl allows applications to enumerate all frame intervals that the
@@ -265,7 +266,7 @@
- Step-wise defined frame interval.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enum-framesizes.rst b/Documentation/linux_tv/media/v4l/vidioc-enum-framesizes.rst
index d01fffa..d3b2e97 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enum-framesizes.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enum-framesizes.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUM_FRAMESIZES
****************************
-NAME
+Name
====
VIDIOC_ENUM_FRAMESIZES - Enumerate frame sizes
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_frmsizeenum *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -32,7 +33,7 @@
and height.
-DESCRIPTION
+Description
===========
This ioctl allows applications to enumerate all frame sizes (i. e. width
@@ -282,7 +283,7 @@
- Step-wise defined frame size.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enum-freq-bands.rst b/Documentation/linux_tv/media/v4l/vidioc-enum-freq-bands.rst
index 7fdde4b..ea754f4 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enum-freq-bands.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enum-freq-bands.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUM_FREQ_BANDS
****************************
-NAME
+Name
====
VIDIOC_ENUM_FREQ_BANDS - Enumerate supported frequency bands
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_frequency_band *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Enumerates the frequency bands that a tuner or modulator supports. To do
@@ -177,7 +178,7 @@
- Amplitude Modulation, commonly used for analog radio.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enumaudio.rst b/Documentation/linux_tv/media/v4l/vidioc-enumaudio.rst
index f833e58..bfdc353 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enumaudio.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enumaudio.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUMAUDIO
**********************
-NAME
+Name
====
VIDIOC_ENUMAUDIO - Enumerate audio inputs
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_audio *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of an audio input applications initialize the
@@ -44,7 +45,7 @@
:ref:`v4l2_audio <v4l2-audio>`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enumaudioout.rst b/Documentation/linux_tv/media/v4l/vidioc-enumaudioout.rst
index f2caf6c..4c17563 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enumaudioout.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enumaudioout.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUMAUDOUT
***********************
-NAME
+Name
====
VIDIOC_ENUMAUDOUT - Enumerate audio outputs
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_audioout *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of an audio output applications initialize the
@@ -47,7 +48,7 @@
:ref:`v4l2_audioout <v4l2-audioout>`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enuminput.rst b/Documentation/linux_tv/media/v4l/vidioc-enuminput.rst
index 01a1cad..c1fc2e1 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enuminput.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enuminput.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUMINPUT
**********************
-NAME
+Name
====
VIDIOC_ENUMINPUT - Enumerate video inputs
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_input *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of a video input applications initialize the
@@ -354,7 +355,7 @@
:ref:`v4l2-selections-common`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enumoutput.rst b/Documentation/linux_tv/media/v4l/vidioc-enumoutput.rst
index 99c70e5..82fc9d3 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enumoutput.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enumoutput.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUMOUTPUT
***********************
-NAME
+Name
====
VIDIOC_ENUMOUTPUT - Enumerate video outputs
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_output *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of a video outputs applications initialize the
@@ -209,7 +210,7 @@
:ref:`v4l2-selections-common`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-enumstd.rst b/Documentation/linux_tv/media/v4l/vidioc-enumstd.rst
index e74514e..ce911c8 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-enumstd.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-enumstd.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_ENUMSTD
********************
-NAME
+Name
====
VIDIOC_ENUMSTD - Enumerate supported video standards
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_standard *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of a video standard, especially a custom (driver
@@ -385,7 +386,7 @@
- + 6.5 [8]_
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-expbuf.rst b/Documentation/linux_tv/media/v4l/vidioc-expbuf.rst
index 2c08a34..ded708e 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-expbuf.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-expbuf.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_EXPBUF
*******************
-NAME
+Name
====
VIDIOC_EXPBUF - Export a buffer as a DMABUF file descriptor.
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_exportbuffer *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl is an extension to the :ref:`memory mapping <mmap>` I/O
@@ -184,7 +185,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-audio.rst b/Documentation/linux_tv/media/v4l/vidioc-g-audio.rst
index 02db00a..cccbcdb 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-audio.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-audio.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_AUDIO, VIDIOC_S_AUDIO
************************************
-NAME
+Name
====
VIDIOC_G_AUDIO - VIDIOC_S_AUDIO - Query or select the current audio input and its attributes
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_audio *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_audio *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the current audio input applications zero out the ``reserved``
@@ -149,7 +150,7 @@
- AVL mode is on.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-audioout.rst b/Documentation/linux_tv/media/v4l/vidioc-g-audioout.rst
index 9265be5..e36b5a1 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-audioout.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-audioout.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_AUDOUT, VIDIOC_S_AUDOUT
**************************************
-NAME
+Name
====
VIDIOC_G_AUDOUT - VIDIOC_S_AUDOUT - Query or select the current audio output
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_audioout *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_audioout *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the current audio output applications zero out the ``reserved``
@@ -108,7 +109,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-crop.rst b/Documentation/linux_tv/media/v4l/vidioc-g-crop.rst
index 206fdd5..6cf7649 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-crop.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-crop.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_CROP, VIDIOC_S_CROP
**********************************
-NAME
+Name
====
VIDIOC_G_CROP - VIDIOC_S_CROP - Get or set the current cropping rectangle
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_crop *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_crop *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the cropping rectangle size and position applications set the
@@ -104,7 +105,7 @@
:ref:`v4l2_cropcap <v4l2-cropcap>` ``bounds`` is used.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-ctrl.rst b/Documentation/linux_tv/media/v4l/vidioc-g-ctrl.rst
index 50fddb1..ee929f6 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-ctrl.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-ctrl.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_CTRL, VIDIOC_S_CTRL
**********************************
-NAME
+Name
====
VIDIOC_G_CTRL - VIDIOC_S_CTRL - Get or set the value of a control
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_control *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To get the current value of a control applications initialize the ``id``
@@ -78,7 +79,7 @@
- New value or current value.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-dv-timings.rst b/Documentation/linux_tv/media/v4l/vidioc-g-dv-timings.rst
index f6e7fd2..0dd93d1 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-dv-timings.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-dv-timings.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS
**********************************************
-NAME
+Name
====
VIDIOC_G_DV_TIMINGS - VIDIOC_S_DV_TIMINGS - VIDIOC_SUBDEV_G_DV_TIMINGS - VIDIOC_SUBDEV_S_DV_TIMINGS - Get or set DV timings for input or output
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_dv_timings *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
``argp``
-DESCRIPTION
+Description
===========
To set DV timings for the input or output, applications use the
@@ -49,7 +50,7 @@
``V4L2_IN_CAP_DV_TIMINGS`` flag), then ``ENODATA`` error code is returned.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-edid.rst b/Documentation/linux_tv/media/v4l/vidioc-g-edid.rst
index 1414026..907b2c1 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-edid.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-edid.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_EDID, VIDIOC_S_EDID, VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID
******************************************************************************
-NAME
+Name
====
VIDIOC_G_EDID - VIDIOC_S_EDID - VIDIOC_SUBDEV_G_EDID - VIDIOC_SUBDEV_S_EDID - Get or set the EDID of a video receiver/transmitter
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_edid *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls can be used to get or set an EDID associated with an input
@@ -143,7 +144,7 @@
``blocks`` * 128.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-enc-index.rst b/Documentation/linux_tv/media/v4l/vidioc-g-enc-index.rst
index 16f0e81..f0f41ac 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-enc-index.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-enc-index.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_ENC_INDEX
************************
-NAME
+Name
====
VIDIOC_G_ENC_INDEX - Get meta data about a compressed video stream
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_enc_idx *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The :ref:`VIDIOC_G_ENC_INDEX <VIDIOC_G_ENC_INDEX>` ioctl provides meta data about a compressed
@@ -201,7 +202,7 @@
type.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/linux_tv/media/v4l/vidioc-g-ext-ctrls.rst
index 2f69b1c..96b6eac 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-ext-ctrls.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_EXT_CTRLS, VIDIOC_S_EXT_CTRLS, VIDIOC_TRY_EXT_CTRLS
******************************************************************
-NAME
+Name
====
VIDIOC_G_EXT_CTRLS - VIDIOC_S_EXT_CTRLS - VIDIOC_TRY_EXT_CTRLS - Get or set the value of several controls, try control values
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_ext_controls *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls allow the caller to get or set multiple controls
@@ -451,7 +452,7 @@
described in :ref:`rf-tuner-controls`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-fbuf.rst b/Documentation/linux_tv/media/v4l/vidioc-g-fbuf.rst
index 4d07994..ef4592c 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-fbuf.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-fbuf.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_FBUF, VIDIOC_S_FBUF
**********************************
-NAME
+Name
====
VIDIOC_G_FBUF - VIDIOC_S_FBUF - Get or set frame buffer overlay parameters
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_framebuffer *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_framebuffer *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
Applications can use the :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>` and :ref:`VIDIOC_S_FBUF <VIDIOC_G_FBUF>` ioctl
@@ -477,7 +478,7 @@
:ref:`v4l2_window <v4l2-window>` is being used.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-fmt.rst b/Documentation/linux_tv/media/v4l/vidioc-g-fmt.rst
index aede100b..ee6f119 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-fmt.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-fmt.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_FMT, VIDIOC_S_FMT, VIDIOC_TRY_FMT
************************************************
-NAME
+Name
====
VIDIOC_G_FMT - VIDIOC_S_FMT - VIDIOC_TRY_FMT - Get or set the data format, try a format
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_format *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls are used to negotiate the format of data (typically image
@@ -175,7 +176,7 @@
- Place holder for future extensions.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-frequency.rst b/Documentation/linux_tv/media/v4l/vidioc-g-frequency.rst
index 2b921cd..a1fd2a8 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-frequency.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-frequency.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_FREQUENCY, VIDIOC_S_FREQUENCY
********************************************
-NAME
+Name
====
VIDIOC_G_FREQUENCY - VIDIOC_S_FREQUENCY - Get or set tuner or modulator radio frequency
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_frequency *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_frequency *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To get the current tuner or modulator radio frequency applications set
@@ -107,7 +108,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-input.rst b/Documentation/linux_tv/media/v4l/vidioc-g-input.rst
index e069ba3..29e22f6 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-input.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-input.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_INPUT, VIDIOC_S_INPUT
************************************
-NAME
+Name
====
VIDIOC_G_INPUT - VIDIOC_S_INPUT - Query or select the current video input
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, int *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the current video input applications call the
@@ -50,7 +51,7 @@
:ref:`VIDIOC_ENUMINPUT` ioctl.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-jpegcomp.rst b/Documentation/linux_tv/media/v4l/vidioc-g-jpegcomp.rst
index c8d3a3b..f5bf8b7 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-jpegcomp.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-jpegcomp.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_JPEGCOMP, VIDIOC_S_JPEGCOMP
******************************************
-NAME
+Name
====
VIDIOC_G_JPEGCOMP - VIDIOC_S_JPEGCOMP
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, v4l2_jpegcompression *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const v4l2_jpegcompression *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls are **deprecated**. New drivers and applications should use
@@ -175,7 +176,7 @@
- App segment, driver will always use APP0
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-modulator.rst b/Documentation/linux_tv/media/v4l/vidioc-g-modulator.rst
index 21b9fea..05d8361 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-modulator.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-modulator.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR
********************************************
-NAME
+Name
====
VIDIOC_G_MODULATOR - VIDIOC_S_MODULATOR - Get or set modulator attributes
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_modulator *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_modulator *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of a modulator applications initialize the
@@ -242,7 +243,7 @@
- Enable the RDS encoder for a radio FM transmitter.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-output.rst b/Documentation/linux_tv/media/v4l/vidioc-g-output.rst
index c9fb075..ae0ad57 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-output.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-output.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_OUTPUT, VIDIOC_S_OUTPUT
**************************************
-NAME
+Name
====
VIDIOC_G_OUTPUT - VIDIOC_S_OUTPUT - Query or select the current video output
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, int *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the current video output applications call the
@@ -51,7 +52,7 @@
:ref:`VIDIOC_ENUMOUTPUT` ioctl.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-parm.rst b/Documentation/linux_tv/media/v4l/vidioc-g-parm.rst
index 964e3b8..7116e0d 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-parm.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-parm.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_PARM, VIDIOC_S_PARM
**********************************
-NAME
+Name
====
VIDIOC_G_PARM - VIDIOC_S_PARM - Get or set streaming parameters
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, v4l2_streamparm *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The current video standard determines a nominal number of frames per
@@ -340,7 +341,7 @@
- Capture might only work through the :ref:`read() <func-read>` call.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-priority.rst b/Documentation/linux_tv/media/v4l/vidioc-g-priority.rst
index 8255f24..4419195 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-priority.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-priority.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_PRIORITY, VIDIOC_S_PRIORITY
******************************************
-NAME
+Name
====
VIDIOC_G_PRIORITY - VIDIOC_S_PRIORITY - Query or request the access priority associated with a file descriptor
-SYNOPSIS
+
+Synopsis
========
.. c:function:: int ioctl( int fd, int request, enum v4l2_priority *argp )
@@ -19,7 +20,7 @@
.. c:function:: int ioctl( int fd, int request, const enum v4l2_priority *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -32,7 +33,7 @@
Pointer to an enum v4l2_priority type.
-DESCRIPTION
+Description
===========
To query the current access priority applications call the
@@ -102,7 +103,7 @@
applications which must not be interrupted, like video recording.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-selection.rst b/Documentation/linux_tv/media/v4l/vidioc-g-selection.rst
index c4164ea..953931f 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-selection.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-selection.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION
********************************************
-NAME
+Name
====
VIDIOC_G_SELECTION - VIDIOC_S_SELECTION - Get or set one of the selection rectangles
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_selection *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The ioctls are used to query and configure selection rectangles.
@@ -187,7 +188,7 @@
this array.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/linux_tv/media/v4l/vidioc-g-sliced-vbi-cap.rst
index 46676024..76dd4ba 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-sliced-vbi-cap.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-sliced-vbi-cap.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_G_SLICED_VBI_CAP
*****************************
-NAME
+Name
====
VIDIOC_G_SLICED_VBI_CAP - Query sliced VBI capabilities
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_sliced_vbi_cap *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To find out which data services are supported by a sliced VBI capture or
@@ -264,7 +265,7 @@
- :cspan:`2` Set of services applicable to 625 line systems.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-std.rst b/Documentation/linux_tv/media/v4l/vidioc-g-std.rst
index 4fbc9e9..5c2b861 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-std.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-std.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_STD, VIDIOC_S_STD
********************************
-NAME
+Name
====
VIDIOC_G_STD - VIDIOC_S_STD - Query or select the video standard of the current input
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, v4l2_std_id *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const v4l2_std_id *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query and select the current video standard applications use the
@@ -53,7 +54,7 @@
returned.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-g-tuner.rst b/Documentation/linux_tv/media/v4l/vidioc-g-tuner.rst
index fe904db..a8d7ebd 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-g-tuner.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-g-tuner.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_G_TUNER, VIDIOC_S_TUNER
************************************
-NAME
+Name
====
VIDIOC_G_TUNER - VIDIOC_S_TUNER - Get or set tuner attributes
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_tuner *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_tuner *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of a tuner applications initialize the ``index``
@@ -692,7 +693,7 @@
- Lang1/Lang2 (preferred) or Lang1/Lang1
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-log-status.rst b/Documentation/linux_tv/media/v4l/vidioc-log-status.rst
index d96d5e4..66fc352 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-log-status.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-log-status.rst
@@ -6,23 +6,24 @@
ioctl VIDIOC_LOG_STATUS
***********************
-NAME
+Name
====
VIDIOC_LOG_STATUS - Log driver status information
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request )
-ARGUMENTS
+Arguments
=========
-DESCRIPTION
+Description
===========
As the video/audio devices become more complicated it becomes harder to
@@ -37,7 +38,7 @@
in Linux 2.6.15.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-overlay.rst b/Documentation/linux_tv/media/v4l/vidioc-overlay.rst
index cd58a34..191dbc1 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-overlay.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-overlay.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_OVERLAY
********************
-NAME
+Name
====
VIDIOC_OVERLAY - Start or stop video overlay
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, const int *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl is part of the :ref:`video overlay <overlay>` I/O method.
@@ -42,7 +43,7 @@
``V4L2_BUF_TYPE_VIDEO_OVERLAY``.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-prepare-buf.rst b/Documentation/linux_tv/media/v4l/vidioc-prepare-buf.rst
index 0f51082..79076df 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-prepare-buf.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-prepare-buf.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_PREPARE_BUF
************************
-NAME
+Name
====
VIDIOC_PREPARE_BUF - Prepare a buffer for I/O
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_buffer *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Applications can optionally call the :ref:`VIDIOC_PREPARE_BUF` ioctl to
@@ -45,7 +46,7 @@
:ref:`buffer`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-qbuf.rst b/Documentation/linux_tv/media/v4l/vidioc-qbuf.rst
index bf41f30..9870d24 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-qbuf.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-qbuf.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_QBUF, VIDIOC_DQBUF
*******************************
-NAME
+Name
====
VIDIOC_QBUF - VIDIOC_DQBUF - Exchange a buffer with the driver
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_buffer *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Applications call the ``VIDIOC_QBUF`` ioctl to enqueue an empty
@@ -116,7 +117,7 @@
:ref:`buffer`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-query-dv-timings.rst b/Documentation/linux_tv/media/v4l/vidioc-query-dv-timings.rst
index 38295fd..338b80d 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-query-dv-timings.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-query-dv-timings.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_QUERY_DV_TIMINGS
*****************************
-NAME
+Name
====
VIDIOC_QUERY_DV_TIMINGS - VIDIOC_SUBDEV_QUERY_DV_TIMINGS - Sense the DV preset received by the current input
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_dv_timings *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The hardware may be able to detect the current DV timings automatically,
@@ -61,7 +62,7 @@
precise feedback to the user.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-querybuf.rst b/Documentation/linux_tv/media/v4l/vidioc-querybuf.rst
index 6454c30..32af6f7 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-querybuf.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-querybuf.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_QUERYBUF
*********************
-NAME
+Name
====
VIDIOC_QUERYBUF - Query the status of a buffer
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_buffer *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl is part of the :ref:`streaming <mmap>` I/O method. It can
@@ -68,7 +69,7 @@
:ref:`buffer`.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-querycap.rst b/Documentation/linux_tv/media/v4l/vidioc-querycap.rst
index 406c5eb..f0271f8 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-querycap.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-querycap.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_QUERYCAP
*********************
-NAME
+Name
====
VIDIOC_QUERYCAP - Query device capabilities
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_capability *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
All V4L2 devices support the ``VIDIOC_QUERYCAP`` ioctl. It is used to
@@ -420,7 +421,7 @@
``device_caps`` field.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-queryctrl.rst b/Documentation/linux_tv/media/v4l/vidioc-queryctrl.rst
index 4e0eb7b..0f27e71 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-queryctrl.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-queryctrl.rst
@@ -6,12 +6,13 @@
ioctls VIDIOC_QUERYCTRL, VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU
*******************************************************************
-NAME
+Name
====
VIDIOC_QUERYCTRL - VIDIOC_QUERY_EXT_CTRL - VIDIOC_QUERYMENU - Enumerate controls and menu control items
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_queryctrl *argp )
@@ -21,7 +22,7 @@
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_querymenu *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -33,7 +34,7 @@
``argp``
-DESCRIPTION
+Description
===========
To query the attributes of a control applications set the ``id`` field
@@ -753,7 +754,7 @@
``V4L2_CTRL_TYPE_BUTTON`` have this flag set.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-querystd.rst b/Documentation/linux_tv/media/v4l/vidioc-querystd.rst
index fe540f8..5bf6277 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-querystd.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-querystd.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_QUERYSTD
*********************
-NAME
+Name
====
VIDIOC_QUERYSTD - Sense the video standard received by the current input
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, v4l2_std_id *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The hardware may be able to detect the current video standard
@@ -54,7 +55,7 @@
standard, allocate new buffers and start streaming again.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-reqbufs.rst b/Documentation/linux_tv/media/v4l/vidioc-reqbufs.rst
index 2e27708..c25b071 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-reqbufs.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-reqbufs.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_REQBUFS
********************
-NAME
+Name
====
VIDIOC_REQBUFS - Initiate Memory Mapping or User Pointer I/O
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_requestbuffers *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl is used to initiate :ref:`memory mapped <mmap>`,
@@ -112,7 +113,7 @@
must set the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/linux_tv/media/v4l/vidioc-s-hw-freq-seek.rst
index 068a67e..5fd332a 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-s-hw-freq-seek.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-s-hw-freq-seek.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_S_HW_FREQ_SEEK
***************************
-NAME
+Name
====
VIDIOC_S_HW_FREQ_SEEK - Perform a hardware frequency seek
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_hw_freq_seek *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Start a hardware frequency seek from the current frequency. To do this
@@ -155,7 +156,7 @@
zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-streamon.rst b/Documentation/linux_tv/media/v4l/vidioc-streamon.rst
index 0e6b750..e87500e 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-streamon.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-streamon.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_STREAMON, VIDIOC_STREAMOFF
***************************************
-NAME
+Name
====
VIDIOC_STREAMON - VIDIOC_STREAMOFF - Start or stop streaming I/O
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, const int *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The ``VIDIOC_STREAMON`` and ``VIDIOC_STREAMOFF`` ioctl start and stop
@@ -81,7 +82,7 @@
to synchronize with other events.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-interval.rst
index 0d2b690..0aa6482 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-interval.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-interval.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL
***************************************
-NAME
+Name
====
VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL - Enumerate frame intervals
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_frame_interval_enum * argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl lets applications enumerate available frame intervals on a
@@ -137,7 +138,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-size.rst
index c52a02d..7a5811b 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-size.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-frame-size.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBDEV_ENUM_FRAME_SIZE
***********************************
-NAME
+Name
====
VIDIOC_SUBDEV_ENUM_FRAME_SIZE - Enumerate media bus frame sizes
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_frame_size_enum * argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
This ioctl allows applications to enumerate all frame sizes supported by
@@ -147,7 +148,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-mbus-code.rst
index 1ff173e..bc0531e 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-mbus-code.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-enum-mbus-code.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBDEV_ENUM_MBUS_CODE
**********************************
-NAME
+Name
====
VIDIOC_SUBDEV_ENUM_MBUS_CODE - Enumerate media bus formats
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_mbus_code_enum * argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
To enumerate media bus formats available at a given sub-device pad
@@ -100,7 +101,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-crop.rst
index 94bffa7..690034a 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-crop.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-crop.rst
@@ -6,12 +6,13 @@
ioctl VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP
************************************************
-NAME
+Name
====
VIDIOC_SUBDEV_G_CROP - VIDIOC_SUBDEV_S_CROP - Get or set the crop rectangle on a subdev pad
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_crop *argp )
@@ -19,7 +20,7 @@
.. cpp:function:: int ioctl( int fd, int request, const struct v4l2_subdev_crop *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -31,7 +32,7 @@
``argp``
-DESCRIPTION
+Description
===========
**Note**
@@ -114,7 +115,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-fmt.rst
index 13615c0..90e2a66 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-fmt.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-fmt.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT
**********************************************
-NAME
+Name
====
VIDIOC_SUBDEV_G_FMT - VIDIOC_SUBDEV_S_FMT - Get or set the data format on a subdev pad
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_format *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls are used to negotiate the frame format at specific subdev
@@ -144,7 +145,7 @@
- Active formats, applied to the hardware.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-frame-interval.rst
index 05f5bfb..d8a1cab 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-frame-interval.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-frame-interval.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL
********************************************************************
-NAME
+Name
====
VIDIOC_SUBDEV_G_FRAME_INTERVAL - VIDIOC_SUBDEV_S_FRAME_INTERVAL - Get or set the frame interval on a subdev pad
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_frame_interval *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -30,7 +31,7 @@
``argp``
-DESCRIPTION
+Description
===========
These ioctls are used to get and set the frame interval at specific
@@ -100,7 +101,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-selection.rst
index dd0dab7..50838a4 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subdev-g-selection.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subdev-g-selection.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION
**********************************************************
-NAME
+Name
====
VIDIOC_SUBDEV_G_SELECTION - VIDIOC_SUBDEV_S_SELECTION - Get or set selection rectangles on a subdev pad
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_subdev_selection *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
The selections are used to configure various image processing
@@ -122,7 +123,7 @@
the array to zero.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
diff --git a/Documentation/linux_tv/media/v4l/vidioc-subscribe-event.rst b/Documentation/linux_tv/media/v4l/vidioc-subscribe-event.rst
index 2ecce15..a027f60 100644
--- a/Documentation/linux_tv/media/v4l/vidioc-subscribe-event.rst
+++ b/Documentation/linux_tv/media/v4l/vidioc-subscribe-event.rst
@@ -6,18 +6,19 @@
ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT
******************************************************
-NAME
+Name
====
VIDIOC_SUBSCRIBE_EVENT - VIDIOC_UNSUBSCRIBE_EVENT - Subscribe or unsubscribe event
-SYNOPSIS
+
+Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, struct v4l2_event_subscription *argp )
-ARGUMENTS
+Arguments
=========
``fd``
@@ -29,7 +30,7 @@
``argp``
-DESCRIPTION
+Description
===========
Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by
@@ -126,7 +127,7 @@
situations like that.
-RETURN VALUE
+Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set