Merge branch 'topic/rcar' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-rspi
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index eb1f1ef..4f6fbfd 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -370,7 +370,7 @@
config SPI_RSPI
tristate "Renesas RSPI controller"
- depends on (SUPERH || ARCH_SHMOBILE) && SH_DMAE_BASE
+ depends on (SUPERH && SH_DMAE_BASE) || ARCH_SHMOBILE
help
SPI driver for Renesas RSPI blocks.
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index cfdbb42..5877224 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -37,117 +37,145 @@
#include <linux/spi/spi.h>
#include <linux/spi/rspi.h>
-#define RSPI_SPCR 0x00
-#define RSPI_SSLP 0x01
-#define RSPI_SPPCR 0x02
-#define RSPI_SPSR 0x03
-#define RSPI_SPDR 0x04
-#define RSPI_SPSCR 0x08
-#define RSPI_SPSSR 0x09
-#define RSPI_SPBR 0x0a
-#define RSPI_SPDCR 0x0b
-#define RSPI_SPCKD 0x0c
-#define RSPI_SSLND 0x0d
-#define RSPI_SPND 0x0e
-#define RSPI_SPCR2 0x0f
-#define RSPI_SPCMD0 0x10
-#define RSPI_SPCMD1 0x12
-#define RSPI_SPCMD2 0x14
-#define RSPI_SPCMD3 0x16
-#define RSPI_SPCMD4 0x18
-#define RSPI_SPCMD5 0x1a
-#define RSPI_SPCMD6 0x1c
-#define RSPI_SPCMD7 0x1e
+#define RSPI_SPCR 0x00 /* Control Register */
+#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */
+#define RSPI_SPPCR 0x02 /* Pin Control Register */
+#define RSPI_SPSR 0x03 /* Status Register */
+#define RSPI_SPDR 0x04 /* Data Register */
+#define RSPI_SPSCR 0x08 /* Sequence Control Register */
+#define RSPI_SPSSR 0x09 /* Sequence Status Register */
+#define RSPI_SPBR 0x0a /* Bit Rate Register */
+#define RSPI_SPDCR 0x0b /* Data Control Register */
+#define RSPI_SPCKD 0x0c /* Clock Delay Register */
+#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */
+#define RSPI_SPND 0x0e /* Next-Access Delay Register */
+#define RSPI_SPCR2 0x0f /* Control Register 2 */
+#define RSPI_SPCMD0 0x10 /* Command Register 0 */
+#define RSPI_SPCMD1 0x12 /* Command Register 1 */
+#define RSPI_SPCMD2 0x14 /* Command Register 2 */
+#define RSPI_SPCMD3 0x16 /* Command Register 3 */
+#define RSPI_SPCMD4 0x18 /* Command Register 4 */
+#define RSPI_SPCMD5 0x1a /* Command Register 5 */
+#define RSPI_SPCMD6 0x1c /* Command Register 6 */
+#define RSPI_SPCMD7 0x1e /* Command Register 7 */
+#define RSPI_SPBFCR 0x20 /* Buffer Control Register */
+#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */
/*qspi only */
-#define QSPI_SPBFCR 0x18
-#define QSPI_SPBDCR 0x1a
-#define QSPI_SPBMUL0 0x1c
-#define QSPI_SPBMUL1 0x20
-#define QSPI_SPBMUL2 0x24
-#define QSPI_SPBMUL3 0x28
+#define QSPI_SPBFCR 0x18 /* Buffer Control Register */
+#define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */
+#define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */
+#define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */
+#define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */
+#define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */
-/* SPCR */
-#define SPCR_SPRIE 0x80
-#define SPCR_SPE 0x40
-#define SPCR_SPTIE 0x20
-#define SPCR_SPEIE 0x10
-#define SPCR_MSTR 0x08
-#define SPCR_MODFEN 0x04
-#define SPCR_TXMD 0x02
-#define SPCR_SPMS 0x01
+/* SPCR - Control Register */
+#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */
+#define SPCR_SPE 0x40 /* Function Enable */
+#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */
+#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */
+#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */
+#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */
+/* RSPI on SH only */
+#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */
+#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */
+/* QSPI on R-Car M2 only */
+#define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */
+#define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */
-/* SSLP */
-#define SSLP_SSL1P 0x02
-#define SSLP_SSL0P 0x01
+/* SSLP - Slave Select Polarity Register */
+#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */
+#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */
-/* SPPCR */
-#define SPPCR_MOIFE 0x20
-#define SPPCR_MOIFV 0x10
+/* SPPCR - Pin Control Register */
+#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */
+#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */
#define SPPCR_SPOM 0x04
-#define SPPCR_SPLP2 0x02
-#define SPPCR_SPLP 0x01
+#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */
+#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */
-/* SPSR */
-#define SPSR_SPRF 0x80
-#define SPSR_SPTEF 0x20
-#define SPSR_PERF 0x08
-#define SPSR_MODF 0x04
-#define SPSR_IDLNF 0x02
-#define SPSR_OVRF 0x01
+#define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */
+#define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */
-/* SPSCR */
-#define SPSCR_SPSLN_MASK 0x07
+/* SPSR - Status Register */
+#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */
+#define SPSR_TEND 0x40 /* Transmit End */
+#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */
+#define SPSR_PERF 0x08 /* Parity Error Flag */
+#define SPSR_MODF 0x04 /* Mode Fault Error Flag */
+#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */
+#define SPSR_OVRF 0x01 /* Overrun Error Flag */
-/* SPSSR */
-#define SPSSR_SPECM_MASK 0x70
-#define SPSSR_SPCP_MASK 0x07
+/* SPSCR - Sequence Control Register */
+#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */
-/* SPDCR */
-#define SPDCR_SPLW 0x20
-#define SPDCR_SPRDTD 0x10
+/* SPSSR - Sequence Status Register */
+#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */
+#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */
+
+/* SPDCR - Data Control Register */
+#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */
+#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */
+#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */
+#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0)
+#define SPDCR_SPLWORD SPDCR_SPLW1
+#define SPDCR_SPLBYTE SPDCR_SPLW0
+#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */
+#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select */
#define SPDCR_SLSEL1 0x08
#define SPDCR_SLSEL0 0x04
-#define SPDCR_SLSEL_MASK 0x0c
+#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select */
#define SPDCR_SPFC1 0x02
#define SPDCR_SPFC0 0x01
+#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) */
-/* SPCKD */
-#define SPCKD_SCKDL_MASK 0x07
+/* SPCKD - Clock Delay Register */
+#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */
-/* SSLND */
-#define SSLND_SLNDL_MASK 0x07
+/* SSLND - Slave Select Negation Delay Register */
+#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */
-/* SPND */
-#define SPND_SPNDL_MASK 0x07
+/* SPND - Next-Access Delay Register */
+#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */
-/* SPCR2 */
-#define SPCR2_PTE 0x08
-#define SPCR2_SPIE 0x04
-#define SPCR2_SPOE 0x02
-#define SPCR2_SPPE 0x01
+/* SPCR2 - Control Register 2 */
+#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */
+#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */
+#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */
+#define SPCR2_SPPE 0x01 /* Parity Enable */
-/* SPCMDn */
-#define SPCMD_SCKDEN 0x8000
-#define SPCMD_SLNDEN 0x4000
-#define SPCMD_SPNDEN 0x2000
-#define SPCMD_LSBF 0x1000
-#define SPCMD_SPB_MASK 0x0f00
+/* SPCMDn - Command Registers */
+#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */
+#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */
+#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */
+#define SPCMD_LSBF 0x1000 /* LSB First */
+#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */
#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
#define SPCMD_SPB_8BIT 0x0000 /* qspi only */
#define SPCMD_SPB_16BIT 0x0100
#define SPCMD_SPB_20BIT 0x0000
#define SPCMD_SPB_24BIT 0x0100
#define SPCMD_SPB_32BIT 0x0200
-#define SPCMD_SSLKP 0x0080
-#define SPCMD_SSLA_MASK 0x0030
-#define SPCMD_BRDV_MASK 0x000c
-#define SPCMD_CPOL 0x0002
-#define SPCMD_CPHA 0x0001
+#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */
+#define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */
+#define SPCMD_SPIMOD1 0x0040
+#define SPCMD_SPIMOD0 0x0020
+#define SPCMD_SPIMOD_SINGLE 0
+#define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0
+#define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1
+#define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */
+#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */
+#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */
+#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */
+#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */
-/* SPBFCR */
-#define SPBFCR_TXRST 0x80 /* qspi only */
-#define SPBFCR_RXRST 0x40 /* qspi only */
+/* SPBFCR - Buffer Control Register */
+#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset (qspi only) */
+#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset (qspi only) */
+#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
+#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
+
+#define DUMMY_DATA 0x00
struct rspi_data {
void __iomem *addr;
@@ -158,7 +186,8 @@
wait_queue_head_t wait;
spinlock_t lock;
struct clk *clk;
- unsigned char spsr;
+ u8 spsr;
+ u16 spcmd;
const struct spi_ops *ops;
/* for dmaengine */
@@ -170,34 +199,35 @@
unsigned dma_callbacked:1;
};
-static void rspi_write8(struct rspi_data *rspi, u8 data, u16 offset)
+static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset)
{
iowrite8(data, rspi->addr + offset);
}
-static void rspi_write16(struct rspi_data *rspi, u16 data, u16 offset)
+static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset)
{
iowrite16(data, rspi->addr + offset);
}
-static void rspi_write32(struct rspi_data *rspi, u32 data, u16 offset)
+static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset)
{
iowrite32(data, rspi->addr + offset);
}
-static u8 rspi_read8(struct rspi_data *rspi, u16 offset)
+static u8 rspi_read8(const struct rspi_data *rspi, u16 offset)
{
return ioread8(rspi->addr + offset);
}
-static u16 rspi_read16(struct rspi_data *rspi, u16 offset)
+static u16 rspi_read16(const struct rspi_data *rspi, u16 offset)
{
return ioread16(rspi->addr + offset);
}
/* optional functions */
struct spi_ops {
- int (*set_config_register)(struct rspi_data *rspi, int access_size);
+ int (*set_config_register)(const struct rspi_data *rspi,
+ int access_size);
int (*send_pio)(struct rspi_data *rspi, struct spi_message *mesg,
struct spi_transfer *t);
int (*receive_pio)(struct rspi_data *rspi, struct spi_message *mesg,
@@ -208,7 +238,8 @@
/*
* functions for RSPI
*/
-static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
+static int rspi_set_config_register(const struct rspi_data *rspi,
+ int access_size)
{
int spbr;
@@ -231,7 +262,7 @@
rspi_write8(rspi, 0x00, RSPI_SPCR2);
/* Sets SPCMD */
- rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP,
+ rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | rspi->spcmd,
RSPI_SPCMD0);
/* Sets RSPI mode */
@@ -243,7 +274,8 @@
/*
* functions for QSPI
*/
-static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
+static int qspi_set_config_register(const struct rspi_data *rspi,
+ int access_size)
{
u16 spcmd;
int spbr;
@@ -271,7 +303,7 @@
else
spcmd = SPCMD_SPB_32BIT;
- spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SSLKP | SPCMD_SPNDEN;
+ spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | rspi->spcmd | SPCMD_SPNDEN;
/* Resets transfer data length */
rspi_write32(rspi, 0, QSPI_SPBMUL0);
@@ -292,12 +324,12 @@
#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
-static void rspi_enable_irq(struct rspi_data *rspi, u8 enable)
+static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
{
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
}
-static void rspi_disable_irq(struct rspi_data *rspi, u8 disable)
+static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable)
{
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR);
}
@@ -316,12 +348,12 @@
return 0;
}
-static void rspi_assert_ssl(struct rspi_data *rspi)
+static void rspi_assert_ssl(const struct rspi_data *rspi)
{
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR);
}
-static void rspi_negate_ssl(struct rspi_data *rspi)
+static void rspi_negate_ssl(const struct rspi_data *rspi)
{
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
}
@@ -330,9 +362,7 @@
struct spi_transfer *t)
{
int remain = t->len;
- u8 *data;
-
- data = (u8 *)t->tx_buf;
+ const u8 *data = t->tx_buf;
while (remain > 0) {
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD,
RSPI_SPCR);
@@ -348,7 +378,7 @@
remain--;
}
- /* Waiting for the last transmition */
+ /* Waiting for the last transmission */
rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
return 0;
@@ -358,12 +388,11 @@
struct spi_transfer *t)
{
int remain = t->len;
- u8 *data;
+ const u8 *data = t->tx_buf;
rspi_write8(rspi, SPBFCR_TXRST, QSPI_SPBFCR);
rspi_write8(rspi, 0x00, QSPI_SPBFCR);
- data = (u8 *)t->tx_buf;
while (remain > 0) {
if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) {
@@ -383,7 +412,7 @@
remain--;
}
- /* Waiting for the last transmition */
+ /* Waiting for the last transmission */
rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
return 0;
@@ -399,8 +428,8 @@
wake_up_interruptible(&rspi->wait);
}
-static int rspi_dma_map_sg(struct scatterlist *sg, void *buf, unsigned len,
- struct dma_chan *chan,
+static int rspi_dma_map_sg(struct scatterlist *sg, const void *buf,
+ unsigned len, struct dma_chan *chan,
enum dma_transfer_direction dir)
{
sg_init_table(sg, 1);
@@ -440,12 +469,13 @@
static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
{
struct scatterlist sg;
- void *buf = NULL;
+ const void *buf = NULL;
struct dma_async_tx_descriptor *desc;
unsigned len;
int ret = 0;
if (rspi->dma_width_16bit) {
+ void *tmp;
/*
* If DMAC bus width is 16-bit, the driver allocates a dummy
* buffer. And, the driver converts original data into the
@@ -454,13 +484,14 @@
* DMAC data: 1st byte, dummy, 2nd byte, dummy ...
*/
len = t->len * 2;
- buf = kmalloc(len, GFP_KERNEL);
- if (!buf)
+ tmp = kmalloc(len, GFP_KERNEL);
+ if (!tmp)
return -ENOMEM;
- rspi_memory_to_8bit(buf, t->tx_buf, t->len);
+ rspi_memory_to_8bit(tmp, t->tx_buf, t->len);
+ buf = tmp;
} else {
len = t->len;
- buf = (void *)t->tx_buf;
+ buf = t->tx_buf;
}
if (!rspi_dma_map_sg(&sg, buf, len, rspi->chan_tx, DMA_TO_DEVICE)) {
@@ -508,9 +539,9 @@
return ret;
}
-static void rspi_receive_init(struct rspi_data *rspi)
+static void rspi_receive_init(const struct rspi_data *rspi)
{
- unsigned char spsr;
+ u8 spsr;
spsr = rspi_read8(rspi, RSPI_SPSR);
if (spsr & SPSR_SPRF)
@@ -528,7 +559,7 @@
rspi_receive_init(rspi);
- data = (u8 *)t->rx_buf;
+ data = t->rx_buf;
while (remain > 0) {
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD,
RSPI_SPCR);
@@ -539,7 +570,7 @@
return -ETIMEDOUT;
}
/* dummy write for generate clock */
- rspi_write16(rspi, 0x00, RSPI_SPDR);
+ rspi_write16(rspi, DUMMY_DATA, RSPI_SPDR);
if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) {
dev_err(&rspi->master->dev,
@@ -556,9 +587,9 @@
return 0;
}
-static void qspi_receive_init(struct rspi_data *rspi)
+static void qspi_receive_init(const struct rspi_data *rspi)
{
- unsigned char spsr;
+ u8 spsr;
spsr = rspi_read8(rspi, RSPI_SPSR);
if (spsr & SPSR_SPRF)
@@ -575,7 +606,7 @@
qspi_receive_init(rspi);
- data = (u8 *)t->rx_buf;
+ data = t->rx_buf;
while (remain > 0) {
if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) {
@@ -584,7 +615,7 @@
return -ETIMEDOUT;
}
/* dummy write for generate clock */
- rspi_write8(rspi, 0x00, RSPI_SPDR);
+ rspi_write8(rspi, DUMMY_DATA, RSPI_SPDR);
if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) {
dev_err(&rspi->master->dev,
@@ -704,7 +735,7 @@
return ret;
}
-static int rspi_is_dma(struct rspi_data *rspi, struct spi_transfer *t)
+static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t)
{
if (t->tx_buf && rspi->chan_tx)
return 1;
@@ -775,6 +806,12 @@
spi->bits_per_word = 8;
rspi->max_speed_hz = spi->max_speed_hz;
+ rspi->spcmd = SPCMD_SSLKP;
+ if (spi->mode & SPI_CPOL)
+ rspi->spcmd |= SPCMD_CPOL;
+ if (spi->mode & SPI_CPHA)
+ rspi->spcmd |= SPCMD_CPHA;
+
set_config_register(rspi, 8);
return 0;
@@ -802,10 +839,10 @@
static irqreturn_t rspi_irq(int irq, void *_sr)
{
- struct rspi_data *rspi = (struct rspi_data *)_sr;
- unsigned long spsr;
+ struct rspi_data *rspi = _sr;
+ u8 spsr;
irqreturn_t ret = IRQ_NONE;
- unsigned char disable_irq = 0;
+ u8 disable_irq = 0;
rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
if (spsr & SPSR_SPRF)
@@ -825,7 +862,7 @@
static int rspi_request_dma(struct rspi_data *rspi,
struct platform_device *pdev)
{
- struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
+ const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dma_cap_mask_t mask;
struct dma_slave_config cfg;
@@ -899,7 +936,7 @@
struct rspi_data *rspi;
int ret, irq;
char clk_name[16];
- struct rspi_plat_data *rspi_pd = pdev->dev.platform_data;
+ const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
const struct spi_ops *ops;
const struct platform_device_id *id_entry = pdev->id_entry;
@@ -956,6 +993,7 @@
master->setup = rspi_setup;
master->transfer = rspi_transfer;
master->cleanup = rspi_cleanup;
+ master->mode_bits = SPI_CPHA | SPI_CPOL;
ret = devm_request_irq(&pdev->dev, irq, rspi_irq, 0,
dev_name(&pdev->dev), rspi);