pm2fb: Permedia 2V initialization fixes
This patch:
- initializes correctly the Permedia2V chip if it is not initialized by BIOS
- puts back clock frequency for the ELSA WINNER board to 100kHz
- fixes returned error values from setcolreg() function
- uses more general classes for PCI ids
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 2543125..a5ccddc 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -343,7 +343,7 @@
static void reset_config(struct pm2fb_par* p)
{
- WAIT_FIFO(p, 52);
+ WAIT_FIFO(p, 53);
pm2_WR(p, PM2R_CHIP_CONFIG, pm2_RD(p, PM2R_CHIP_CONFIG) &
~(PM2F_VGA_ENABLE | PM2F_VGA_FIXED));
pm2_WR(p, PM2R_BYPASS_WRITE_MASK, ~(0L));
@@ -380,6 +380,7 @@
pm2_WR(p, PM2R_STATISTICS_MODE, 0);
pm2_WR(p, PM2R_SCISSOR_MODE, 0);
pm2_WR(p, PM2R_FILTER_MODE, PM2F_SYNCHRONIZATION);
+ pm2_WR(p, PM2R_RD_PIXEL_MASK, 0xff);
switch (p->type) {
case PM2_TYPE_PERMEDIA2:
pm2_RDAC_WR(p, PM2I_RD_MODE_CONTROL, 0); /* no overlay */
@@ -393,11 +394,6 @@
break;
case PM2_TYPE_PERMEDIA2V:
pm2v_RDAC_WR(p, PM2VI_RD_MISC_CONTROL, 1); /* 8bit */
- pm2v_RDAC_WR(p, PM2I_RD_COLOR_KEY_CONTROL, 0);
- pm2v_RDAC_WR(p, PM2I_RD_OVERLAY_KEY, 0);
- pm2v_RDAC_WR(p, PM2I_RD_RED_KEY, 0);
- pm2v_RDAC_WR(p, PM2I_RD_GREEN_KEY, 0);
- pm2v_RDAC_WR(p, PM2I_RD_BLUE_KEY, 0);
break;
}
}
@@ -532,7 +528,7 @@
vsync &= ~(PM2F_HSYNC_MASK | PM2F_VSYNC_MASK);
vsync |= PM2F_HSYNC_ACT_HIGH | PM2F_VSYNC_ACT_HIGH;
- WAIT_FIFO(p, 5);
+ WAIT_FIFO(p, 3);
pm2_WR(p, PM2R_VIDEO_CONTROL, vsync);
switch (p->type) {
@@ -551,7 +547,6 @@
if ((video & PM2F_VSYNC_MASK) == PM2F_VSYNC_ACT_LOW)
tmp |= 4; /* invert vsync */
pm2v_RDAC_WR(p, PM2VI_RD_SYNC_CONTROL, tmp);
- pm2v_RDAC_WR(p, PM2VI_RD_MISC_CONTROL, 1);
break;
}
}
@@ -686,6 +681,7 @@
u32 txtmap = 0;
u32 pixsize = 0;
u32 clrformat = 0;
+ u32 misc = 1; /* 8-bit DAC */
u32 xres = (info->var.xres + 31) & ~31;
int data64;
@@ -767,7 +763,7 @@
switch (depth) {
case 8:
pm2_WR(par, PM2R_FB_READ_PIXEL, 0);
- clrformat = 0x0e;
+ clrformat = 0x2e;
break;
case 16:
pm2_WR(par, PM2R_FB_READ_PIXEL, 1);
@@ -775,6 +771,7 @@
txtmap = PM2F_TEXTEL_SIZE_16;
pixsize = 1;
clrformat = 0x70;
+ misc |= 8;
break;
case 32:
pm2_WR(par, PM2R_FB_READ_PIXEL, 2);
@@ -782,6 +779,7 @@
txtmap = PM2F_TEXTEL_SIZE_32;
pixsize = 2;
clrformat = 0x20;
+ misc |= 8;
break;
case 24:
pm2_WR(par, PM2R_FB_READ_PIXEL, 4);
@@ -789,6 +787,7 @@
txtmap = PM2F_TEXTEL_SIZE_24;
pixsize = 4;
clrformat = 0x20;
+ misc |= 8;
break;
}
pm2_WR(par, PM2R_FB_WRITE_MODE, PM2F_FB_WRITE_ENABLE);
@@ -813,7 +812,7 @@
pm2_WR(par, PM2R_SCREEN_BASE, base);
wmb();
set_video(par, video);
- WAIT_FIFO(par, 6);
+ WAIT_FIFO(par, 10);
switch (par->type) {
case PM2_TYPE_PERMEDIA2:
pm2_RDAC_WR(par, PM2I_RD_COLOR_MODE, clrmode);
@@ -821,10 +820,11 @@
(depth == 8) ? 0 : PM2F_COLOR_KEY_TEST_OFF);
break;
case PM2_TYPE_PERMEDIA2V:
+ pm2v_RDAC_WR(par, PM2VI_RD_DAC_CONTROL, 0);
pm2v_RDAC_WR(par, PM2VI_RD_PIXEL_SIZE, pixsize);
pm2v_RDAC_WR(par, PM2VI_RD_COLOR_FORMAT, clrformat);
- pm2v_RDAC_WR(par, PM2I_RD_COLOR_KEY_CONTROL,
- (depth == 8) ? 0 : PM2F_COLOR_KEY_TEST_OFF);
+ pm2v_RDAC_WR(par, PM2VI_RD_MISC_CONTROL, misc);
+ pm2v_RDAC_WR(par, PM2VI_RD_OVERLAY_KEY, 0);
break;
}
set_pixclock(par, pixclock);
@@ -855,7 +855,7 @@
struct pm2fb_par *par = info->par;
if (regno >= info->cmap.len) /* no. of hw registers */
- return 1;
+ return -EINVAL;
/*
* Program hardware... do anything you want with transp
*/
@@ -914,7 +914,7 @@
u32 v;
if (regno >= 16)
- return 1;
+ return -EINVAL;
v = (red << info->var.red.offset) |
(green << info->var.green.offset) |
@@ -1341,7 +1341,7 @@
DPRINTK("We have not been initialized by VGA BIOS "
"and are running on an Elsa Winner 2000 Office\n");
DPRINTK("Initializing card timings manually...\n");
- default_par->memclock = 70000;
+ default_par->memclock = 100000;
}
if (pdev->subsystem_vendor == 0x3d3d &&
pdev->subsystem_device == 0x0100) {
@@ -1491,17 +1491,11 @@
static struct pci_device_id pm2fb_id_table[] = {
{ PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TVP4020,
- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
- 0xff0000, 0 },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2,
- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
- 0xff0000, 0 },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2V,
- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
- 0xff0000, 0 },
- { PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2V,
- PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA << 8,
- 0xff00, 0 },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, }
};
diff --git a/include/video/permedia2.h b/include/video/permedia2.h
index 144c81c..cf1d95b 100644
--- a/include/video/permedia2.h
+++ b/include/video/permedia2.h
@@ -153,6 +153,7 @@
#define PM2VI_RD_CURSOR_Y_HIGH 0x00A
#define PM2VI_RD_CURSOR_X_HOT 0x00B
#define PM2VI_RD_CURSOR_Y_HOT 0x00C
+#define PM2VI_RD_OVERLAY_KEY 0x00D
#define PM2VI_RD_CLK0_PRESCALE 0x201
#define PM2VI_RD_CLK0_FEEDBACK 0x202
#define PM2VI_RD_CLK0_POSTSCALE 0x203