pm2fb: RDAC_WR barriers clean up
This patch fixes a possible barriers problem in RDAC_WR functions, then
remove redudant ones.
It also removes one unneeded register load from blitter function().
Signed-off-by: Krzysztof.Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index ab5e668..0a04483a 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -183,15 +183,17 @@
index = PM2VR_RD_INDEXED_DATA;
break;
}
- mb();
+ wmb();
pm2_WR(p, index, v);
+ wmb();
}
static inline void pm2v_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v)
{
pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff);
- mb();
+ wmb();
pm2_WR(p, PM2VR_RD_INDEXED_DATA, v);
+ wmb();
}
#ifdef CONFIG_FB_PM2_FIFO_DISCONNECT
@@ -466,11 +468,9 @@
WAIT_FIFO(par, 8);
pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_MCLK_CONTROL >> 8);
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 0);
- wmb();
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_PRESCALE, m);
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_FEEDBACK, n);
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_POSTSCALE, p);
- wmb();
pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 1);
rmb();
for (i = 256;
@@ -483,12 +483,9 @@
pm2_mnp(clk, &m, &n, &p);
WAIT_FIFO(par, 10);
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m);
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p);
- wmb();
pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS);
rmb();
for (i = 256;
@@ -509,12 +506,9 @@
pm2_mnp(clk, &m, &n, &p);
WAIT_FIFO(par, 8);
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 0);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A1, m);
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A2, n);
- wmb();
pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 8|p);
- wmb();
pm2_RDAC_RD(par, PM2I_RD_PIXEL_CLOCK_STATUS);
rmb();
for (i = 256;
@@ -1066,10 +1060,9 @@
if (!w || !h)
return;
- WAIT_FIFO(par, 6);
+ WAIT_FIFO(par, 5);
pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE |
PM2F_CONFIG_FB_READ_SOURCE_ENABLE);
- pm2_WR(par, PM2R_FB_PIXEL_OFFSET, 0);
if (copy)
pm2_WR(par, PM2R_FB_SOURCE_DELTA,
((ysrc-y) & 0xfff) << 16 | ((xsrc-x) & 0xfff));