[SCSI] fnic: fnic_scsi.c: clean up
In fnic_abort_cmd() and fnic_device_reset() assign `rport' earlier to make
FNIC_SCSI_DBG() calls cleaner.
In fnic_clean_pending_aborts() `rport' is not used.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 3cc47c6..198cbab 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1246,11 +1246,10 @@
lp = shost_priv(sc->device->host);
fnic = lport_priv(lp);
- FNIC_SCSI_DBG(KERN_DEBUG,
- fnic->lport->host,
- "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
- (starget_to_rport(scsi_target(sc->device)))->port_id,
- sc->device->lun, sc->request->tag);
+ rport = starget_to_rport(scsi_target(sc->device));
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
+ rport->port_id, sc->device->lun, sc->request->tag);
if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
ret = FAILED;
@@ -1299,7 +1298,6 @@
* port is up, then send abts to the remote port to terminate
* the IO. Else, just locally terminate the IO in the firmware
*/
- rport = starget_to_rport(scsi_target(sc->device));
if (fc_remote_port_chkready(rport) == 0)
task_req = FCPIO_ITMF_ABT_TASK;
else
@@ -1418,7 +1416,6 @@
unsigned long flags;
int ret = 0;
struct scsi_cmnd *sc;
- struct fc_rport *rport;
struct scsi_lun fc_lun;
struct scsi_device *lun_dev = lr_sc->device;
DECLARE_COMPLETION_ONSTACK(tm_done);
@@ -1458,7 +1455,6 @@
/* Now queue the abort command to firmware */
int_to_scsilun(sc->device->lun, &fc_lun);
- rport = starget_to_rport(scsi_target(sc->device));
if (fnic_queue_abort_io_req(fnic, tag,
FCPIO_ITMF_ABT_TASK_TERM,
@@ -1528,18 +1524,16 @@
lp = shost_priv(sc->device->host);
fnic = lport_priv(lp);
- FNIC_SCSI_DBG(KERN_DEBUG,
- fnic->lport->host,
- "Device reset called FCID 0x%x, LUN 0x%x\n",
- (starget_to_rport(scsi_target(sc->device)))->port_id,
- sc->device->lun);
+ rport = starget_to_rport(scsi_target(sc->device));
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Device reset called FCID 0x%x, LUN 0x%x\n",
+ rport->port_id, sc->device->lun);
if (lp->state != LPORT_ST_READY || !(lp->link_up))
goto fnic_device_reset_end;
/* Check if remote port up */
- rport = starget_to_rport(scsi_target(sc->device));
if (fc_remote_port_chkready(rport))
goto fnic_device_reset_end;