hwmon: (mc13783-adc) Add support for the MC13892 PMIC
Based on a patch by David Jander that mostly did s/mc13783/mc13xxx/ .
Additionally use dev_get_drvdata instead of to_platform_device +
platform_get_drvdata in mc13783_adc_read (spotted by Jean Delvare).
Cc: David Jander <david.jander@protonic.nl>
Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
index 044531a..d0e7b3f 100644
--- a/Documentation/hwmon/mc13783-adc
+++ b/Documentation/hwmon/mc13783-adc
@@ -3,8 +3,11 @@
Supported chips:
* Freescale Atlas MC13783
- Prefix: 'mc13783_adc'
+ Prefix: 'mc13783'
Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+ * Freescale Atlas MC13892
+ Prefix: 'mc13892'
+ Datasheet: http://cache.freescale.com/files/analog/doc/data_sheet/MC13892.pdf?fsrch=1&sr=1
Authors:
Sascha Hauer <s.hauer@pengutronix.de>
@@ -13,20 +16,21 @@
Description
-----------
-The Freescale MC13783 is a Power Management and Audio Circuit. Among
-other things it contains a 10-bit A/D converter. The converter has 16
-channels which can be used in different modes.
-The A/D converter has a resolution of 2.25mV. Channels 0-4 have
-a dedicated meaning with chip internal scaling applied. Channels 5-7
-can be used as general purpose inputs or alternatively in a dedicated
-mode. Channels 12-15 are occupied by the touchscreen if it's active.
+The Freescale MC13783 and MC13892 are Power Management and Audio Circuits.
+Among other things they contain a 10-bit A/D converter. The converter has 16
+(MC13783) resp. 12 (MC13892) channels which can be used in different modes. The
+A/D converter has a resolution of 2.25mV.
-Currently the driver only supports channels 2 and 5-15 with no alternative
-modes for channels 5-7.
+Some channels can be used as General Purpose inputs or in a dedicated mode with
+a chip internal scaling applied .
-See this table for the meaning of the different channels and their chip
-internal scaling:
+Currently the driver only supports the Application Supply channel (BP / BPSNS),
+the General Purpose inputs and touchscreen.
+See the following tables for the meaning of the different channels and their
+chip internal scaling:
+
+MC13783:
Channel Signal Input Range Scaling
-------------------------------------------------------------------------------
0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V
@@ -34,7 +38,7 @@
2 Application Supply (BP) 2.50 - 4.65V -2.40V
3 Charger Voltage (CHRGRAW) 0 - 10V / /5
0 - 20V /10
-4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25V - 0.25V x4
+4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25 - 0.25V x4
5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No
6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No /
1.50 - 3.50V -1.20V
@@ -48,3 +52,23 @@
13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No
14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No
15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No
+
+MC13892:
+Channel Signal Input Range Scaling
+-------------------------------------------------------------------------------
+0 Battery Voltage (BATT) 0 - 4.8V /2
+1 Battery Current (BATT - BATTISNSCC) -60 - 60 mV x20
+2 Application Supply (BPSNS) 0 - 4.8V /2
+3 Charger Voltage (CHRGRAW) 0 - 12V / /5
+ 0 - 20V /10
+4 Charger Current (CHRGISNS-BPSNS) / -0.3 - 0.3V / x4 /
+ Touchscreen X-plate 1 0 - 2.4V No
+5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.4V No
+6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.4V / No
+ Backup Voltage (LICELL) 0 - 3.6V x2/3
+7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.4V / No /
+ 0 - 4.8V /2
+12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.4V No
+13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.4V No
+14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.4V No
+15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.4V No
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index fc3f4e1..7190a3f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1360,10 +1360,10 @@
the awesome power of applesmc.
config SENSORS_MC13783_ADC
- tristate "Freescale MC13783 ADC"
- depends on MFD_MC13783
+ tristate "Freescale MC13783/MC13892 ADC"
+ depends on MFD_MC13XXX
help
- Support for the A/D converter on MC13783 PMIC.
+ Support for the A/D converter on MC13783 and MC13892 PMIC.
if ACPI
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index 04d13b3..6c6b240 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -1,5 +1,5 @@
/*
- * Driver for the Freescale Semiconductor MC13783 adc.
+ * Driver for the ADC on Freescale Semiconductor MC13783 and MC13892 PMICs.
*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Sascha Hauer, Pengutronix
@@ -18,7 +18,7 @@
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/mfd/mc13783.h>
+#include <linux/mfd/mc13xxx.h>
#include <linux/platform_device.h>
#include <linux/hwmon-sysfs.h>
#include <linux/kernel.h>
@@ -28,24 +28,30 @@
#include <linux/init.h>
#include <linux/err.h>
-#define MC13783_ADC_NAME "mc13783-adc"
+#define DRIVER_NAME "mc13783-adc"
+
+/* platform device id driver data */
+#define MC13783_ADC_16CHANS 1
+#define MC13783_ADC_BPDIV2 2
struct mc13783_adc_priv {
struct mc13xxx *mc13xxx;
struct device *hwmon_dev;
+ char name[10];
};
static ssize_t mc13783_adc_show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
{
- return sprintf(buf, "mc13783_adc\n");
+ struct mc13783_adc_priv *priv = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", priv->name);
}
static int mc13783_adc_read(struct device *dev,
struct device_attribute *devattr, unsigned int *val)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+ struct mc13783_adc_priv *priv = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
unsigned int channel = attr->index;
unsigned int sample[4];
@@ -68,16 +74,21 @@
struct device_attribute *devattr, char *buf)
{
unsigned val;
+ struct platform_device *pdev = to_platform_device(dev);
+ kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
int ret = mc13783_adc_read(dev, devattr, &val);
if (ret)
return ret;
- /*
- * BP (channel 2) reports with offset 2.4V to the actual value to fit
- * the input range of the ADC. unit = 2.25mV = 9/4 mV.
- */
- val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
+ if (driver_data & MC13783_ADC_BPDIV2)
+ val = DIV_ROUND_CLOSEST(val * 9, 2);
+ else
+ /*
+ * BP (channel 2) reports with offset 2.4V to the actual value
+ * to fit the input range of the ADC. unit = 2.25mV = 9/4 mV.
+ */
+ val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
return sprintf(buf, "%u\n", val);
}
@@ -114,12 +125,21 @@
static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14);
static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15);
-static struct attribute *mc13783_attr[] = {
+static struct attribute *mc13783_attr_base[] = {
&dev_attr_name.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mc13783_group_base = {
+ .attrs = mc13783_attr_base,
+};
+
+/* these are only used if MC13783_ADC_16CHANS is provided in driver data */
+static struct attribute *mc13783_attr_16chans[] = {
&sensor_dev_attr_in8_input.dev_attr.attr,
&sensor_dev_attr_in9_input.dev_attr.attr,
&sensor_dev_attr_in10_input.dev_attr.attr,
@@ -127,8 +147,8 @@
NULL
};
-static const struct attribute_group mc13783_group = {
- .attrs = mc13783_attr,
+static const struct attribute_group mc13783_group_16chans = {
+ .attrs = mc13783_attr_16chans,
};
/* last four channels may be occupied by the touchscreen */
@@ -156,24 +176,37 @@
{
struct mc13783_adc_priv *priv;
int ret;
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ char *dash;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
+ snprintf(priv->name, ARRAY_SIZE(priv->name), "%s", id->name);
+ dash = strchr(priv->name, '-');
+ if (dash)
+ *dash = '\0';
platform_set_drvdata(pdev, priv);
/* Register sysfs hooks */
- ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group);
+ ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_base);
if (ret)
- goto out_err_create1;
+ goto out_err_create_base;
+
+ if (id->driver_data & MC13783_ADC_16CHANS) {
+ ret = sysfs_create_group(&pdev->dev.kobj,
+ &mc13783_group_16chans);
+ if (ret)
+ goto out_err_create_16chans;
+ }
if (!mc13783_adc_use_touchscreen(pdev)) {
ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
if (ret)
- goto out_err_create2;
+ goto out_err_create_ts;
}
priv->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -184,17 +217,20 @@
goto out_err_register;
}
-
return 0;
out_err_register:
if (!mc13783_adc_use_touchscreen(pdev))
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
-out_err_create2:
+out_err_create_ts:
- sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
-out_err_create1:
+ if (id->driver_data & MC13783_ADC_16CHANS)
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_16chans);
+out_err_create_16chans:
+
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_base);
+out_err_create_base:
platform_set_drvdata(pdev, NULL);
kfree(priv);
@@ -205,13 +241,17 @@
static int __devexit mc13783_adc_remove(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+ kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
hwmon_device_unregister(priv->hwmon_dev);
if (!mc13783_adc_use_touchscreen(pdev))
sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
- sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+ if (driver_data & MC13783_ADC_16CHANS)
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_16chans);
+
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_base);
platform_set_drvdata(pdev, NULL);
kfree(priv);
@@ -219,12 +259,26 @@
return 0;
}
+static const struct platform_device_id mc13783_adc_idtable[] = {
+ {
+ .name = "mc13783-adc",
+ .driver_data = MC13783_ADC_16CHANS,
+ }, {
+ .name = "mc13892-adc",
+ .driver_data = MC13783_ADC_BPDIV2,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mc13783_adc_idtable);
+
static struct platform_driver mc13783_adc_driver = {
.remove = __devexit_p(mc13783_adc_remove),
.driver = {
.owner = THIS_MODULE,
- .name = MC13783_ADC_NAME,
+ .name = DRIVER_NAME,
},
+ .id_table = mc13783_adc_idtable,
};
static int __init mc13783_adc_init(void)
@@ -243,4 +297,3 @@
MODULE_DESCRIPTION("MC13783 ADC driver");
MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" MC13783_ADC_NAME);