[IA64] more robust zx1/sx1000 machvec support
Machine vector selection has always been a bit of a hack given how
early in system boot it needs to be done. Services like ACPI namespace
are not available and there are non-trivial problems to moving them to
early boot. However, there's no reason we can't change to a different
machvec later in boot when the services we need are available. By
adding a entry point for later initialization of the swiotlb, we can add
an error path for the hpzx1 machevec initialization and fall back to the
DIG machine vector if IOMMU hardware isn't found in the system. Since
ia64 uses 4GB for zone DMA (no ISA support), it's trivial to allocate a
contiguous range from the slab for bounce buffer usage.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 80f8ef0..317c334 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -17,7 +17,7 @@
#include <asm/machvec.h>
/* swiotlb declarations & definitions: */
-extern void swiotlb_init_with_default_size (size_t size);
+extern int swiotlb_late_init_with_default_size (size_t size);
extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
extern ia64_mv_dma_map_single swiotlb_map_single;
@@ -67,7 +67,16 @@
hwsw_init (void)
{
/* default to a smallish 2MB sw I/O TLB */
- swiotlb_init_with_default_size (2 * (1<<20));
+ if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) {
+#ifdef CONFIG_IA64_GENERIC
+ /* Better to have normal DMA than panic */
+ printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
+ " reverting to hpzx1 platform vector\n", __FUNCTION__);
+ machvec_init("hpzx1");
+#else
+ panic("Unable to initialize software I/O TLB services");
+#endif
+ }
}
void *
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 1195759..e64ca04 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2028,10 +2028,41 @@
static int __init
sba_init(void)
{
- acpi_bus_register_driver(&acpi_sba_ioc_driver);
- if (!ioc_list)
+ if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
return 0;
+ acpi_bus_register_driver(&acpi_sba_ioc_driver);
+ if (!ioc_list) {
+#ifdef CONFIG_IA64_GENERIC
+ extern int swiotlb_late_init_with_default_size (size_t size);
+
+ /*
+ * If we didn't find something sba_iommu can claim, we
+ * need to setup the swiotlb and switch to the dig machvec.
+ */
+ if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
+ panic("Unable to find SBA IOMMU or initialize "
+ "software I/O TLB: Try machvec=dig boot option");
+ machvec_init("dig");
+#else
+ panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
+#endif
+ return 0;
+ }
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+ /*
+ * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
+ * buffer setup to support devices with smaller DMA masks than
+ * sba_iommu can handle.
+ */
+ if (ia64_platform_is("hpzx1_swiotlb")) {
+ extern void hwsw_init(void);
+
+ hwsw_init();
+ }
+#endif
+
#ifdef CONFIG_PCI
{
struct pci_bus *b = NULL;
@@ -2048,18 +2079,6 @@
subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
-extern void dig_setup(char**);
-/*
- * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
- * so we use the platform_setup hook to fix it up.
- */
-void __init
-sba_setup(char **cmdline_p)
-{
- MAX_DMA_ADDRESS = ~0UL;
- dig_setup(cmdline_p);
-}
-
static int __init
nosbagart(char *str)
{
diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c
index dbc0b3e..875b0c1 100644
--- a/arch/ia64/lib/swiotlb.c
+++ b/arch/ia64/lib/swiotlb.c
@@ -49,6 +49,15 @@
*/
#define IO_TLB_SHIFT 11
+#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
+
+/*
+ * Minimum IO TLB size to bother booting with. Systems with mainly
+ * 64bit capable cards will only lightly use the swiotlb. If we can't
+ * allocate a contiguous 1MB, we're probably in trouble anyway.
+ */
+#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
+
int swiotlb_force;
/*
@@ -154,6 +163,99 @@
swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
}
+/*
+ * Systems with larger DMA zones (those that don't support ISA) can
+ * initialize the swiotlb later using the slab allocator if needed.
+ * This should be just like above, but with some error catching.
+ */
+int
+swiotlb_late_init_with_default_size (size_t default_size)
+{
+ unsigned long i, req_nslabs = io_tlb_nslabs;
+ unsigned int order;
+
+ if (!io_tlb_nslabs) {
+ io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
+ io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+ }
+
+ /*
+ * Get IO TLB memory from the low pages
+ */
+ order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_nslabs = SLABS_PER_PAGE << order;
+
+ while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
+ io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
+ order);
+ if (io_tlb_start)
+ break;
+ order--;
+ }
+
+ if (!io_tlb_start)
+ goto cleanup1;
+
+ if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
+ printk(KERN_WARNING "Warning: only able to allocate %ld MB "
+ "for software IO TLB\n", (PAGE_SIZE << order) >> 20);
+ io_tlb_nslabs = SLABS_PER_PAGE << order;
+ }
+ io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
+ memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+
+ /*
+ * Allocate and initialize the free list array. This array is used
+ * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
+ * between io_tlb_start and io_tlb_end.
+ */
+ io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(int)));
+ if (!io_tlb_list)
+ goto cleanup2;
+
+ for (i = 0; i < io_tlb_nslabs; i++)
+ io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
+ io_tlb_index = 0;
+
+ io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(char *)));
+ if (!io_tlb_orig_addr)
+ goto cleanup3;
+
+ memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
+
+ /*
+ * Get the overflow emergency buffer
+ */
+ io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
+ get_order(io_tlb_overflow));
+ if (!io_tlb_overflow_buffer)
+ goto cleanup4;
+
+ printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
+ "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
+ virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+
+ return 0;
+
+cleanup4:
+ free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
+ sizeof(char *)));
+ io_tlb_orig_addr = NULL;
+cleanup3:
+ free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
+ sizeof(int)));
+ io_tlb_list = NULL;
+ io_tlb_end = NULL;
+cleanup2:
+ free_pages((unsigned long)io_tlb_start, order);
+ io_tlb_start = NULL;
+cleanup1:
+ io_tlb_nslabs = req_nslabs;
+ return -ENOMEM;
+}
+
static inline int
address_needs_mapping(struct device *hwdev, dma_addr_t addr)
{