iwlwifi: pcie: change indentation of iwl_pcie_set_interrupt_capa()
Function is very indented. Go to msi section if needed to avoid
it and by that make the code more readable.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index d7521c1..43c3915 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1513,57 +1513,57 @@
struct iwl_trans *trans)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
- int max_vector, nvec, i;
+ int max_irqs, num_irqs, i, ret;
u16 pci_cmd;
- if (trans->cfg->mq_rx_supported) {
- max_vector = min_t(u32, (num_possible_cpus() + 2),
- IWL_MAX_RX_HW_QUEUES);
- for (i = 0; i < max_vector; i++)
- trans_pcie->msix_entries[i].entry = i;
+ if (!trans->cfg->mq_rx_supported)
+ goto enable_msi;
- nvec = pci_enable_msix_range(pdev, trans_pcie->msix_entries,
- MSIX_MIN_INTERRUPT_VECTORS,
- max_vector);
- if (nvec < 0) {
- IWL_DEBUG_INFO(trans,
- "ret = %d failed to enable msi-x mode move to msi mode\n",
- nvec);
- goto msi;
- }
+ max_irqs = min_t(u32, num_possible_cpus() + 2, IWL_MAX_RX_HW_QUEUES);
+ for (i = 0; i < max_irqs; i++)
+ trans_pcie->msix_entries[i].entry = i;
+ num_irqs = pci_enable_msix_range(pdev, trans_pcie->msix_entries,
+ MSIX_MIN_INTERRUPT_VECTORS,
+ max_irqs);
+ if (num_irqs < 0) {
IWL_DEBUG_INFO(trans,
- "Enable MSI-X allocate %d interrupt vector\n",
- nvec);
- trans_pcie->def_irq = (nvec == max_vector) ? nvec - 1 : 0;
- /*
- * In case the OS provides fewer interrupts than requested,
- * different causes will share the same interrupt vector
- * as follow:
- * One interrupt less: non rx causes shared with FBQ.
- * Two interrupts less: non rx causes shared with FBQ and RSS.
- * More than two interrupts: we will use fewer RSS queues.
- */
- if (nvec <= num_online_cpus()) {
- trans_pcie->trans->num_rx_queues = nvec + 1;
- trans_pcie->shared_vec_mask = IWL_SHARED_IRQ_NON_RX |
- IWL_SHARED_IRQ_FIRST_RSS;
- } else if (nvec == num_online_cpus() + 1) {
- trans_pcie->trans->num_rx_queues = nvec;
- trans_pcie->shared_vec_mask = IWL_SHARED_IRQ_NON_RX;
- } else {
- trans_pcie->trans->num_rx_queues = nvec - 1;
- }
-
- trans_pcie->alloc_vecs = nvec;
- trans_pcie->msix_enabled = true;
- return;
+ "Failed to enable msi-x mode (ret %d). Moving to msi mode.\n",
+ num_irqs);
+ goto enable_msi;
}
-msi:
+ trans_pcie->def_irq = (num_irqs == max_irqs) ? num_irqs - 1 : 0;
- nvec = pci_enable_msi(pdev);
- if (nvec) {
- dev_err(&pdev->dev, "pci_enable_msi failed - %d\n", nvec);
+ IWL_DEBUG_INFO(trans,
+ "MSI-X enabled. %d interrupt vectors were allocated\n",
+ num_irqs);
+
+ /*
+ * In case the OS provides fewer interrupts than requested, different
+ * causes will share the same interrupt vector as follows:
+ * One interrupt less: non rx causes shared with FBQ.
+ * Two interrupts less: non rx causes shared with FBQ and RSS.
+ * More than two interrupts: we will use fewer RSS queues.
+ */
+ if (num_irqs <= num_online_cpus()) {
+ trans_pcie->trans->num_rx_queues = num_irqs + 1;
+ trans_pcie->shared_vec_mask = IWL_SHARED_IRQ_NON_RX |
+ IWL_SHARED_IRQ_FIRST_RSS;
+ } else if (num_irqs == num_online_cpus() + 1) {
+ trans_pcie->trans->num_rx_queues = num_irqs;
+ trans_pcie->shared_vec_mask = IWL_SHARED_IRQ_NON_RX;
+ } else {
+ trans_pcie->trans->num_rx_queues = num_irqs - 1;
+ }
+
+ trans_pcie->alloc_vecs = num_irqs;
+ trans_pcie->msix_enabled = true;
+ return;
+
+enable_msi:
+ ret = pci_enable_msi(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "pci_enable_msi failed - %d\n", ret);
/* enable rfkill interrupt: hw bug w/a */
pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {