viafb: kill crt_setting_information
As the iga path is the only remaining information which is also
handled by the active devices there is no reason to keep it.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index c4d2136..0098270 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -770,13 +770,14 @@
/*Set IGA path for each device*/
void viafb_set_iga_path(void)
{
+ int crt_iga_path = 0;
if (viafb_SAMM_ON == 1) {
if (viafb_CRT_ON) {
if (viafb_primary_dev == CRT_Device)
- viaparinfo->crt_setting_info->iga_path = IGA1;
+ crt_iga_path = IGA1;
else
- viaparinfo->crt_setting_info->iga_path = IGA2;
+ crt_iga_path = IGA2;
}
if (viafb_DVI_ON) {
@@ -793,8 +794,7 @@
UNICHROME_CLE266)) {
viaparinfo->
lvds_setting_info->iga_path = IGA2;
- viaparinfo->
- crt_setting_info->iga_path = IGA1;
+ crt_iga_path = IGA1;
viaparinfo->
tmds_setting_info->iga_path = IGA1;
} else
@@ -814,10 +814,10 @@
viafb_SAMM_ON = 0;
if (viafb_CRT_ON && viafb_LCD_ON) {
- viaparinfo->crt_setting_info->iga_path = IGA1;
+ crt_iga_path = IGA1;
viaparinfo->lvds_setting_info->iga_path = IGA2;
} else if (viafb_CRT_ON && viafb_DVI_ON) {
- viaparinfo->crt_setting_info->iga_path = IGA1;
+ crt_iga_path = IGA1;
viaparinfo->tmds_setting_info->iga_path = IGA2;
} else if (viafb_LCD_ON && viafb_DVI_ON) {
viaparinfo->tmds_setting_info->iga_path = IGA1;
@@ -826,7 +826,7 @@
viaparinfo->lvds_setting_info->iga_path = IGA2;
viaparinfo->lvds_setting_info2->iga_path = IGA2;
} else if (viafb_CRT_ON) {
- viaparinfo->crt_setting_info->iga_path = IGA1;
+ crt_iga_path = IGA1;
} else if (viafb_LCD_ON) {
viaparinfo->lvds_setting_info->iga_path = IGA2;
} else if (viafb_DVI_ON) {
@@ -837,7 +837,7 @@
viaparinfo->shared->iga1_devices = 0;
viaparinfo->shared->iga2_devices = 0;
if (viafb_CRT_ON) {
- if (viaparinfo->crt_setting_info->iga_path == IGA1)
+ if (crt_iga_path == IGA1)
viaparinfo->shared->iga1_devices |= VIA_CRT;
else
viaparinfo->shared->iga2_devices |= VIA_CRT;
@@ -2072,8 +2072,6 @@
init_tmds_chip_info();
init_lvds_chip_info();
- viaparinfo->crt_setting_info->iga_path = IGA1;
-
/*Set IGA path for each device */
viafb_set_iga_path();
@@ -2450,15 +2448,15 @@
/* CRT set mode */
if (viafb_CRT_ON) {
- if (viafb_SAMM_ON && (viaparinfo->crt_setting_info->iga_path ==
- IGA2)) {
+ if (viafb_SAMM_ON &&
+ viaparinfo->shared->iga2_devices & VIA_CRT) {
viafb_fill_crtc_timing(crt_timing1, vmode_tbl1,
- video_bpp1 / 8,
- viaparinfo->crt_setting_info->iga_path);
+ video_bpp1 / 8, IGA2);
} else {
viafb_fill_crtc_timing(crt_timing, vmode_tbl,
video_bpp / 8,
- viaparinfo->crt_setting_info->iga_path);
+ (viaparinfo->shared->iga1_devices & VIA_CRT)
+ ? IGA1 : IGA2);
}
/* Patch if set_hres is not 8 alignment (1366) to viafb_setmode