diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index f46cd02..5627917 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -95,8 +95,10 @@
 
 	if ((vif->type == NL80211_IFTYPE_AP ||
 	     vif->type == NL80211_IFTYPE_MESH_POINT) &&
-	    bss_conf->enable_beacon)
+	    bss_conf->enable_beacon) {
 		priv->reconfig_beacon = true;
+		priv->rearm_ani = true;
+	}
 
 	if (bss_conf->assoc) {
 		priv->rearm_ani = true;
@@ -257,6 +259,7 @@
 
 	ath9k_htc_ps_wakeup(priv);
 
+	ath9k_htc_stop_ani(priv);
 	del_timer_sync(&priv->tx.cleanup_timer);
 	ath9k_htc_tx_drain(priv);
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index afb3d15..be198529 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4948,7 +4948,7 @@
 	if (!err) {
 		/* only set 2G bandwidth using bw_cap command */
 		band_bwcap.band = cpu_to_le32(WLC_BAND_2G);
-		band_bwcap.bw_cap = cpu_to_le32(WLC_BW_40MHZ_BIT);
+		band_bwcap.bw_cap = cpu_to_le32(WLC_BW_CAP_40MHZ);
 		err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap,
 					       sizeof(band_bwcap));
 	} else {
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index fa858d54..0489314 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -611,14 +611,14 @@
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO);
 
 	if (IWL_MVM_BT_COEX_CORUNNING) {
-		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 |
-						    BT_VALID_CORUN_LUT_40);
+		bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_CORUN_LUT_20 |
+						     BT_VALID_CORUN_LUT_40);
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING);
 	}
 
 	if (IWL_MVM_BT_COEX_MPLUT) {
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_MPLUT);
-		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_MULTI_PRIO_LUT);
+		bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_MULTI_PRIO_LUT);
 	}
 
 	if (mvm->cfg->bt_shared_single_ant)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
index 9426905..d73a89e 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -183,9 +183,9 @@
  *	this number of packets were received (typically 1)
  * @passive2active: is auto switching from passive to active during scan allowed
  * @rxchain_sel_flags: RXON_RX_CHAIN_*
- * @max_out_time: in usecs, max out of serving channel time
+ * @max_out_time: in TUs, max out of serving channel time
  * @suspend_time: how long to pause scan when returning to service channel:
- *	bits 0-19: beacon interal in usecs (suspend before executing)
+ *	bits 0-19: beacon interal in TUs (suspend before executing)
  *	bits 20-23: reserved
  *	bits 24-31: number of beacons (suspend between channels)
  * @rxon_flags: RXON_FLG_*
@@ -383,8 +383,8 @@
  * @quiet_plcp_th:	quiet channel num of packets threshold
  * @good_CRC_th:	passive to active promotion threshold
  * @rx_chain:		RXON rx chain.
- * @max_out_time:	max uSec to be out of assoceated channel
- * @suspend_time:	pause scan this long when returning to service channel
+ * @max_out_time:	max TUs to be out of assoceated channel
+ * @suspend_time:	pause scan this TUs when returning to service channel
  * @flags:		RXON flags
  * @filter_flags:	RXONfilter
  * @tx_cmd:		tx command for active scan; for 2GHz and for 5GHz.
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index f0cebf1..b41dc84 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1007,7 +1007,7 @@
 	memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN);
 	len = roundup(sizeof(*cmd) + cmd->count * ETH_ALEN, 4);
 
-	ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, len, cmd);
+	ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_ASYNC, len, cmd);
 	if (ret)
 		IWL_ERR(mvm, "mcast filter cmd error. ret=%d\n", ret);
 }
@@ -1023,7 +1023,7 @@
 	if (WARN_ON_ONCE(!mvm->mcast_filter_cmd))
 		return;
 
-	ieee80211_iterate_active_interfaces(
+	ieee80211_iterate_active_interfaces_atomic(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
 		iwl_mvm_mc_iface_iterator, &iter_data);
 }
@@ -1807,6 +1807,11 @@
 
 	mutex_lock(&mvm->mutex);
 
+	if (!iwl_mvm_is_idle(mvm)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
 	switch (mvm->scan_status) {
 	case IWL_MVM_SCAN_OS:
 		IWL_DEBUG_SCAN(mvm, "Stopping previous scan for sched_scan\n");
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d564233..f1ec098 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -1003,6 +1003,9 @@
 	return mvmvif->low_latency;
 }
 
+/* Assoc status */
+bool iwl_mvm_is_idle(struct iwl_mvm *mvm);
+
 /* Thermal management and CT-kill */
 void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff);
 void iwl_mvm_tt_handler(struct iwl_mvm *mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 9f52c5b..e1c8388 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -1010,7 +1010,7 @@
 		return;
 	}
 
-#ifdef CPTCFG_MAC80211_DEBUGFS
+#ifdef CONFIG_MAC80211_DEBUGFS
 	/* Disable last tx check if we are debugging with fixed rate */
 	if (lq_sta->dbg_fixed_rate) {
 		IWL_DEBUG_RATE(mvm, "Fixed rate. avoid rate scaling\n");
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index c91dc84..c28de54 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -277,51 +277,22 @@
 					    IEEE80211_IFACE_ITER_NORMAL,
 					    iwl_mvm_scan_condition_iterator,
 					    &global_bound);
-	/*
-	 * Under low latency traffic passive scan is fragmented meaning
-	 * that dwell on a particular channel will be fragmented. Each fragment
-	 * dwell time is 20ms and fragments period is 105ms. Skipping to next
-	 * channel will be delayed by the same period - 105ms. So suspend_time
-	 * parameter describing both fragments and channels skipping periods is
-	 * set to 105ms. This value is chosen so that overall passive scan
-	 * duration will not be too long. Max_out_time in this case is set to
-	 * 70ms, so for active scanning operating channel will be left for 70ms
-	 * while for passive still for 20ms (fragment dwell).
-	 */
-	if (global_bound) {
-		if (!iwl_mvm_low_latency(mvm)) {
-			params->suspend_time = ieee80211_tu_to_usec(100);
-			params->max_out_time = ieee80211_tu_to_usec(600);
-		} else {
-			params->suspend_time = ieee80211_tu_to_usec(105);
-			/* P2P doesn't support fragmented passive scan, so
-			 * configure max_out_time to be at least longest dwell
-			 * time for passive scan.
-			 */
-			if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p) {
-				params->max_out_time = ieee80211_tu_to_usec(70);
-				params->passive_fragmented = true;
-			} else {
-				u32 passive_dwell;
 
-				/*
-				 * Use band G so that passive channel dwell time
-				 * will be assigned with maximum value.
-				 */
-				band = IEEE80211_BAND_2GHZ;
-				passive_dwell = iwl_mvm_get_passive_dwell(band);
-				params->max_out_time =
-					ieee80211_tu_to_usec(passive_dwell);
-			}
-		}
+	if (!global_bound)
+		goto not_bound;
+
+	params->suspend_time = 100;
+	params->max_out_time = 600;
+
+	if (iwl_mvm_low_latency(mvm)) {
+		params->suspend_time = 250;
+		params->max_out_time = 250;
 	}
 
+not_bound:
+
 	for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
-		if (params->passive_fragmented)
-			params->dwell[band].passive = 20;
-		else
-			params->dwell[band].passive =
-				iwl_mvm_get_passive_dwell(band);
+		params->dwell[band].passive = iwl_mvm_get_passive_dwell(band);
 		params->dwell[band].active = iwl_mvm_get_active_dwell(band,
 								      n_ssids);
 	}
@@ -761,7 +732,7 @@
 	int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
 	int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
 	int head = 0;
-	int tail = band_2ghz + band_5ghz;
+	int tail = band_2ghz + band_5ghz - 1;
 	u32 ssid_bitmap;
 	int cmd_len;
 	int ret;
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index d619851..2180902 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -644,3 +644,22 @@
 
 	return result;
 }
+
+static void iwl_mvm_idle_iter(void *_data, u8 *mac, struct ieee80211_vif *vif)
+{
+	bool *idle = _data;
+
+	if (!vif->bss_conf.idle)
+		*idle = false;
+}
+
+bool iwl_mvm_is_idle(struct iwl_mvm *mvm)
+{
+	bool idle = true;
+
+	ieee80211_iterate_active_interfaces_atomic(
+			mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+			iwl_mvm_idle_iter, &idle);
+
+	return idle;
+}
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index dcfd6d8..2365553 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1749,6 +1749,10 @@
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
+	trans->dev = &pdev->dev;
+	trans_pcie->pci_dev = pdev;
+	iwl_disable_interrupts(trans);
+
 	err = pci_enable_msi(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "pci_enable_msi failed(0X%x)\n", err);
@@ -1760,8 +1764,6 @@
 		}
 	}
 
-	trans->dev = &pdev->dev;
-	trans_pcie->pci_dev = pdev;
 	trans->hw_rev = iwl_read32(trans, CSR_HW_REV);
 	trans->hw_id = (pdev->device << 16) + pdev->subsystem_device;
 	snprintf(trans->hw_id_str, sizeof(trans->hw_id_str),
@@ -1787,8 +1789,6 @@
 		goto out_pci_disable_msi;
 	}
 
-	trans_pcie->inta_mask = CSR_INI_SET_MASK;
-
 	if (iwl_pcie_alloc_ict(trans))
 		goto out_free_cmd_pool;
 
@@ -1800,6 +1800,8 @@
 		goto out_free_ict;
 	}
 
+	trans_pcie->inta_mask = CSR_INI_SET_MASK;
+
 	return trans;
 
 out_free_ict:
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 1ba9d62..194c1ea 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3856,6 +3856,8 @@
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *	to work properly to suppport receiving regulatory hints from
  *	cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
+ *	here to reserve the value for API/ABI compatibility)
  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
  *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
  *	mode
@@ -3897,7 +3899,7 @@
 	NL80211_FEATURE_HT_IBSS				= 1 << 1,
 	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
 	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	/* bit 4 is reserved - don't use */
+	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
 	NL80211_FEATURE_SAE				= 1 << 5,
 	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
 	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 222c28b..f169b6e 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -317,6 +317,7 @@
 
 	bool started, abort, hw_begun, notified;
 	bool to_be_freed;
+	bool on_channel;
 
 	unsigned long hw_start_time;
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index dee50ae..27600a9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3598,18 +3598,24 @@
 
 	sdata_lock(sdata);
 
-	if (ifmgd->auth_data) {
+	if (ifmgd->auth_data || ifmgd->assoc_data) {
+		const u8 *bssid = ifmgd->auth_data ?
+				ifmgd->auth_data->bss->bssid :
+				ifmgd->assoc_data->bss->bssid;
+
 		/*
-		 * If we are trying to authenticate while suspending, cfg80211
-		 * won't know and won't actually abort those attempts, thus we
-		 * need to do that ourselves.
+		 * If we are trying to authenticate / associate while suspending,
+		 * cfg80211 won't know and won't actually abort those attempts,
+		 * thus we need to do that ourselves.
 		 */
-		ieee80211_send_deauth_disassoc(sdata,
-					       ifmgd->auth_data->bss->bssid,
+		ieee80211_send_deauth_disassoc(sdata, bssid,
 					       IEEE80211_STYPE_DEAUTH,
 					       WLAN_REASON_DEAUTH_LEAVING,
 					       false, frame_buf);
-		ieee80211_destroy_auth_data(sdata, false);
+		if (ifmgd->assoc_data)
+			ieee80211_destroy_assoc_data(sdata, false);
+		if (ifmgd->auth_data)
+			ieee80211_destroy_auth_data(sdata, false);
 		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
 				      IEEE80211_DEAUTH_FRAME_LEN);
 	}
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 6fb3855..7a17dec 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -333,7 +333,7 @@
 		container_of(work, struct ieee80211_roc_work, work.work);
 	struct ieee80211_sub_if_data *sdata = roc->sdata;
 	struct ieee80211_local *local = sdata->local;
-	bool started;
+	bool started, on_channel;
 
 	mutex_lock(&local->mtx);
 
@@ -354,14 +354,26 @@
 	if (!roc->started) {
 		struct ieee80211_roc_work *dep;
 
-		/* start this ROC */
-		ieee80211_offchannel_stop_vifs(local);
+		WARN_ON(local->use_chanctx);
 
-		/* switch channel etc */
+		/* If actually operating on the desired channel (with at least
+		 * 20 MHz channel width) don't stop all the operations but still
+		 * treat it as though the ROC operation started properly, so
+		 * other ROC operations won't interfere with this one.
+		 */
+		roc->on_channel = roc->chan == local->_oper_chandef.chan &&
+				  local->_oper_chandef.width != NL80211_CHAN_WIDTH_5 &&
+				  local->_oper_chandef.width != NL80211_CHAN_WIDTH_10;
+
+		/* start this ROC */
 		ieee80211_recalc_idle(local);
 
-		local->tmp_channel = roc->chan;
-		ieee80211_hw_config(local, 0);
+		if (!roc->on_channel) {
+			ieee80211_offchannel_stop_vifs(local);
+
+			local->tmp_channel = roc->chan;
+			ieee80211_hw_config(local, 0);
+		}
 
 		/* tell userspace or send frame */
 		ieee80211_handle_roc_started(roc);
@@ -380,9 +392,10 @@
  finish:
 		list_del(&roc->list);
 		started = roc->started;
+		on_channel = roc->on_channel;
 		ieee80211_roc_notify_destroy(roc, !roc->abort);
 
-		if (started) {
+		if (started && !on_channel) {
 			ieee80211_flush_queues(local, NULL);
 
 			local->tmp_channel = NULL;
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index a0b0aea..cec5b60 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -21,10 +21,10 @@
 
 #define VIF_ENTRY	__field(enum nl80211_iftype, vif_type) __field(void *, sdata)	\
 			__field(bool, p2p)						\
-			__string(vif_name, sdata->dev ? sdata->dev->name : "<nodev>")
+			__string(vif_name, sdata->name)
 #define VIF_ASSIGN	__entry->vif_type = sdata->vif.type; __entry->sdata = sdata;	\
 			__entry->p2p = sdata->vif.p2p;					\
-			__assign_str(vif_name, sdata->dev ? sdata->dev->name : sdata->name)
+			__assign_str(vif_name, sdata->name)
 #define VIF_PR_FMT	" vif:%s(%d%s)"
 #define VIF_PR_ARG	__get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
 
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index e9e36a2..9265adf 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -129,9 +129,12 @@
 	if (!vht_cap_ie || !sband->vht_cap.vht_supported)
 		return;
 
-	/* A VHT STA must support 40 MHz */
-	if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
-		return;
+	/*
+	 * A VHT STA must support 40 MHz, but if we verify that here
+	 * then we break a few things - some APs (e.g. Netgear R6300v2
+	 * and others based on the BCM4360 chipset) will unset this
+	 * capability bit when operating in 20 MHz.
+	 */
 
 	vht_cap->vht_supported = true;