[PATCH] Support 100 MHz frequency transitions
Future versions of the Opteron processor may support
frequency transitions of 100 MHz, instead of the=20
current 200 MHz. This patch enables the powernow-k8
driver to transition to an odd FID code, indicating
a multiple of 100 MHz frequency.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 3497827..a342b32 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -45,7 +45,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.5"
+#define VERSION "version 1.60.0"
#include "powernow-k8.h"
/* serialize freq changes */
@@ -336,7 +336,7 @@
/* Phase 2 - core frequency transition */
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
{
- u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+ u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
@@ -359,9 +359,11 @@
: vcoreqfid - vcocurrfid;
while (vcofiddiff > 2) {
+ (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
+
if (reqfid > data->currfid) {
if (data->currfid > LO_FID_TABLE_TOP) {
- if (write_new_fid(data, data->currfid + 2)) {
+ if (write_new_fid(data, data->currfid + fid_interval)) {
return 1;
}
} else {
@@ -371,7 +373,7 @@
}
}
} else {
- if (write_new_fid(data, data->currfid - 2))
+ if (write_new_fid(data, data->currfid - fid_interval))
return 1;
}
@@ -474,7 +476,7 @@
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
- ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
+ ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
goto out;
}
@@ -521,10 +523,6 @@
printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
return -ENODEV;
}
- if (pst[j].fid & 1) {
- printk(KERN_ERR BFX "fid invalid - %d : 0x%x\n", j, pst[j].fid);
- return -EINVAL;
- }
if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
/* Only first fid is allowed to be in "low" range */
printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
@@ -1177,4 +1175,3 @@
late_initcall(powernowk8_init);
module_exit(powernowk8_exit);
-