| /* |
| * arch/arm/mach-at91/include/mach/hardware.h |
| * |
| * Copyright (C) 2003 SAN People |
| * Copyright (C) 2003 ATMEL |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #ifndef __ASM_ARCH_HARDWARE_H |
| #define __ASM_ARCH_HARDWARE_H |
| |
| #include <asm/sizes.h> |
| |
| /* DBGU base */ |
| /* rm9200, 9260/9g20, 9261/9g10, 9rl */ |
| #define AT91_BASE_DBGU0 0xfffff200 |
| /* 9263, 9g45, sama5d3 */ |
| #define AT91_BASE_DBGU1 0xffffee00 |
| /* sama5d4 */ |
| #define AT91_BASE_DBGU2 0xfc069000 |
| |
| #if defined(CONFIG_ARCH_AT91X40) |
| #include <mach/at91x40.h> |
| #else |
| #include <mach/at91rm9200.h> |
| #include <mach/at91sam9260.h> |
| #include <mach/at91sam9261.h> |
| #include <mach/at91sam9263.h> |
| #include <mach/at91sam9rl.h> |
| #include <mach/at91sam9g45.h> |
| #include <mach/at91sam9x5.h> |
| #include <mach/at91sam9n12.h> |
| #include <mach/sama5d3.h> |
| #include <mach/sama5d4.h> |
| |
| /* |
| * On all at91 except rm9200 and x40 have the System Controller starts |
| * at address 0xffffc000 and has a size of 16KiB. |
| * |
| * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting |
| * at 0xfffff000 |
| * |
| * Removes the individual definitions of AT91_BASE_SYS and |
| * replaces them with a common version at base 0xfffffc000 and size 16KiB |
| * and map the same memory space |
| */ |
| #define AT91_BASE_SYS 0xffffc000 |
| |
| #endif |
| |
| /* |
| * On sama5d4 there is no system controller, we map some needed peripherals |
| */ |
| #define AT91_ALT_BASE_SYS 0xfc069000 |
| |
| /* |
| * On all at91 have the Advanced Interrupt Controller starts at address |
| * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 |
| */ |
| #define AT91_AIC 0xfffff000 |
| #define AT91_PMC 0xfffffc00 |
| |
| /* |
| * Peripheral identifiers/interrupts. |
| */ |
| #define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ |
| #define AT91_ID_SYS 1 /* System Peripherals */ |
| |
| #ifdef CONFIG_MMU |
| /* |
| * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF |
| * to 0xFEF78000 .. 0xFF000000. (544Kb) |
| */ |
| #define AT91_IO_PHYS_BASE 0xFFF78000 |
| #define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) |
| |
| /* |
| * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000 |
| * to 0xFB069000 .. 0xFB06F000. (24Kb) |
| */ |
| #define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS |
| #define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000) |
| #else |
| /* |
| * Identity mapping for the non MMU case. |
| */ |
| #define AT91_IO_PHYS_BASE AT91_BASE_SYS |
| #define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) |
| |
| #define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS |
| #define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS) |
| #endif |
| |
| #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) |
| |
| /* Convert a physical IO address to virtual IO address */ |
| #define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) |
| #define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE) |
| |
| /* |
| * Virtual to Physical Address mapping for IO devices. |
| */ |
| #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) |
| #define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS) |
| |
| /* Internal SRAM is mapped below the IO devices */ |
| #define AT91_SRAM_MAX SZ_1M |
| #define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) |
| |
| /* External Memory Map */ |
| #define AT91_CHIPSELECT_0 0x10000000 |
| #define AT91_CHIPSELECT_1 0x20000000 |
| #define AT91_CHIPSELECT_2 0x30000000 |
| #define AT91_CHIPSELECT_3 0x40000000 |
| #define AT91_CHIPSELECT_4 0x50000000 |
| #define AT91_CHIPSELECT_5 0x60000000 |
| #define AT91_CHIPSELECT_6 0x70000000 |
| #define AT91_CHIPSELECT_7 0x80000000 |
| |
| /* Clocks */ |
| #define AT91_SLOW_CLOCK 32768 /* slow clock */ |
| |
| /* |
| * FIXME: this is needed to communicate between the pinctrl driver and |
| * the PM implementation in the machine. Possibly part of the PM |
| * implementation should be moved down into the pinctrl driver and get |
| * called as part of the generic suspend/resume path. |
| */ |
| #ifndef __ASSEMBLY__ |
| #ifdef CONFIG_PINCTRL_AT91 |
| extern void at91_pinctrl_gpio_suspend(void); |
| extern void at91_pinctrl_gpio_resume(void); |
| #else |
| static inline void at91_pinctrl_gpio_suspend(void) {} |
| static inline void at91_pinctrl_gpio_resume(void) {} |
| #endif |
| #endif |
| |
| #endif |