Input: add driver for Penmount serial touchscreens
Signed-off-by: Rick Koch <n1gp@hotmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b1b14f8..fa03812 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -108,4 +108,16 @@
To compile this driver as a module, choose M here: the
module will be called hp680_ts_input.
+config TOUCHSCREEN_PENMOUNT
+ tristate "Penmount serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Penmount serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called penmount.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 5e5557c..72e7be8 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,3 +12,4 @@
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
new file mode 100644
index 0000000..f737010
--- /dev/null
+++ b/drivers/input/touchscreen/penmount.c
@@ -0,0 +1,185 @@
+/*
+ * Penmount serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ *
+ * Based on ELO driver (drivers/input/touchscreen/elo.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC "Penmount serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define PM_MAX_LENGTH 5
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct pm {
+ struct input_dev *dev;
+ struct serio *serio;
+ int idx;
+ unsigned char data[PM_MAX_LENGTH];
+ char phys[32];
+};
+
+static irqreturn_t pm_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+ struct pm *pm = serio_get_drvdata(serio);
+ struct input_dev *dev = pm->dev;
+
+ pm->data[pm->idx] = data;
+
+ if (pm->data[0] & 0x80) {
+ if (PM_MAX_LENGTH == ++pm->idx) {
+ input_regs(dev, regs);
+ input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);
+ input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);
+ input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
+ input_sync(dev);
+ pm->idx = 0;
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * pm_disconnect() is the opposite of pm_connect()
+ */
+
+static void pm_disconnect(struct serio *serio)
+{
+ struct pm *pm = serio_get_drvdata(serio);
+
+ input_get_device(pm->dev);
+ input_unregister_device(pm->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_put_device(pm->dev);
+ kfree(pm);
+}
+
+/*
+ * pm_connect() is the routine that is called when someone adds a
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
+ */
+
+static int pm_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct pm *pm;
+ struct input_dev *input_dev;
+ int err;
+
+ pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pm || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ pm->serio = serio;
+ pm->dev = input_dev;
+ snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
+
+ input_dev->private = pm;
+ input_dev->name = "Penmount Serial TouchScreen";
+ input_dev->phys = pm->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_PENMOUNT;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0);
+ input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0);
+
+ serio_set_drvdata(serio, pm);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ err = input_register_device(pm->dev);
+ if (err)
+ goto fail3;
+
+ return 0;
+
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(pm);
+ return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id pm_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_PENMOUNT,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, pm_serio_ids);
+
+static struct serio_driver pm_drv = {
+ .driver = {
+ .name = "penmountlpc",
+ },
+ .description = DRIVER_DESC,
+ .id_table = pm_serio_ids,
+ .interrupt = pm_interrupt,
+ .connect = pm_connect,
+ .disconnect = pm_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init pm_init(void)
+{
+ serio_register_driver(&pm_drv);
+ return 0;
+}
+
+static void __exit pm_exit(void)
+{
+ serio_unregister_driver(&pm_drv);
+}
+
+module_init(pm_init);
+module_exit(pm_exit);
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 6348e83..ad546a0 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -217,5 +217,6 @@
#define SERIO_LKKBD 0x28
#define SERIO_ELO 0x29
#define SERIO_MICROTOUCH 0x30
+#define SERIO_PENMOUNT 0x31
#endif