| /* |
| * arch/arm/mach-sa1100/include/mach/irqs.h |
| * |
| * Copyright (C) 1996 Russell King |
| * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus). |
| * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation) |
| * |
| * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. |
| */ |
| |
| #define IRQ_GPIO0 1 |
| #define IRQ_GPIO1 2 |
| #define IRQ_GPIO2 3 |
| #define IRQ_GPIO3 4 |
| #define IRQ_GPIO4 5 |
| #define IRQ_GPIO5 6 |
| #define IRQ_GPIO6 7 |
| #define IRQ_GPIO7 8 |
| #define IRQ_GPIO8 9 |
| #define IRQ_GPIO9 10 |
| #define IRQ_GPIO10 11 |
| #define IRQ_GPIO11_27 12 |
| #define IRQ_LCD 13 /* LCD controller */ |
| #define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */ |
| #define IRQ_Ser1SDLC 15 /* Ser. port 1 SDLC */ |
| #define IRQ_Ser1UART 16 /* Ser. port 1 UART */ |
| #define IRQ_Ser2ICP 17 /* Ser. port 2 ICP */ |
| #define IRQ_Ser3UART 18 /* Ser. port 3 UART */ |
| #define IRQ_Ser4MCP 19 /* Ser. port 4 MCP */ |
| #define IRQ_Ser4SSP 20 /* Ser. port 4 SSP */ |
| #define IRQ_DMA0 21 /* DMA controller channel 0 */ |
| #define IRQ_DMA1 22 /* DMA controller channel 1 */ |
| #define IRQ_DMA2 23 /* DMA controller channel 2 */ |
| #define IRQ_DMA3 24 /* DMA controller channel 3 */ |
| #define IRQ_DMA4 25 /* DMA controller channel 4 */ |
| #define IRQ_DMA5 26 /* DMA controller channel 5 */ |
| #define IRQ_OST0 27 /* OS Timer match 0 */ |
| #define IRQ_OST1 28 /* OS Timer match 1 */ |
| #define IRQ_OST2 29 /* OS Timer match 2 */ |
| #define IRQ_OST3 30 /* OS Timer match 3 */ |
| #define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */ |
| #define IRQ_RTCAlrm 32 /* RTC Alarm */ |
| |
| #define IRQ_GPIO11 33 |
| #define IRQ_GPIO12 34 |
| #define IRQ_GPIO13 35 |
| #define IRQ_GPIO14 36 |
| #define IRQ_GPIO15 37 |
| #define IRQ_GPIO16 38 |
| #define IRQ_GPIO17 39 |
| #define IRQ_GPIO18 40 |
| #define IRQ_GPIO19 41 |
| #define IRQ_GPIO20 42 |
| #define IRQ_GPIO21 43 |
| #define IRQ_GPIO22 44 |
| #define IRQ_GPIO23 45 |
| #define IRQ_GPIO24 46 |
| #define IRQ_GPIO25 47 |
| #define IRQ_GPIO26 48 |
| #define IRQ_GPIO27 49 |
| |
| /* |
| * The next 16 interrupts are for board specific purposes. Since |
| * the kernel can only run on one machine at a time, we can re-use |
| * these. If you need more, increase IRQ_BOARD_END, but keep it |
| * within sensible limits. IRQs 49 to 64 are available. |
| */ |
| #define IRQ_BOARD_START 50 |
| #define IRQ_BOARD_END 66 |
| |
| /* |
| * Figure out the MAX IRQ number. |
| * |
| * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically |
| * allocate their IRQs above NR_IRQS. |
| * |
| * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has |
| * to be included in the NR_IRQS calculation. |
| */ |
| #ifdef CONFIG_SHARP_LOCOMO |
| #define NR_IRQS_LOCOMO 4 |
| #else |
| #define NR_IRQS_LOCOMO 0 |
| #endif |
| |
| #ifndef NR_IRQS |
| #define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) |
| #endif |
| #define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) |