Merge tag 'zynq-cleanup-for-3.18' of git://git.xilinx.com/linux-xlnx into next/soc
Pull "arm: Xilinx Zynq cleanup patches for v3.18" from Michal Simek:
- PM support
- Fix L2 useless setting
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'zynq-cleanup-for-3.18' of git://git.xilinx.com/linux-xlnx:
ARM: zynq: Remove useless L2C AUX setting
ARM: zynq: Rename 'zynq_platform_cpu_die'
ARM: zynq: Remove hotplug.c
ARM: zynq: Synchronise zynq_cpu_die/kill
ARM: zynq: cpuidle: Remove pointless code
ARM: zynq: Remove invalidate cache for cpu die
ARM: zynq: PM: Enable DDR clock stop
ARM: zynq: DT: Add DDRC node
Documentation: devicetree: Add binding for Synopsys DDR controller
ARM: zynq: PM: Enable A9 internal clock gating feature
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 934f000..f717c7b 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -5,6 +5,11 @@
Required root node properties:
- compatible = "hisilicon,hi3620-hi4511";
+HiP04 D01 Board
+Required root node properties:
+ - compatible = "hisilicon,hip04-d01";
+
+
Hisilicon system controller
Required properties:
@@ -55,3 +60,21 @@
compatible = "hisilicon,pctrl";
reg = <0xfca09000 0x1000>;
};
+
+-----------------------------------------------------------------------
+Fabric:
+
+Required Properties:
+- compatible: "hisilicon,hip04-fabric";
+- reg: Address and size of Fabric
+
+-----------------------------------------------------------------------
+Bootwrapper boot method (software protocol on SMP):
+
+Required Properties:
+- compatible: "hisilicon,hip04-bootwrapper";
+- boot-method: Address and size of boot method.
+ [0]: bootwrapper physical address
+ [1]: bootwrapper size
+ [2]: relocation physical address
+ [3]: relocation size
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index 8a92b5f..8f1424f 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -11,9 +11,11 @@
- compatible: Must be one of the following
- "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+ - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+ - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
- "renesas,cpg-mstp-clock" for generic MSTP gate clocks
- reg: Base address and length of the I/O mapped registers used by the MSTP
clocks. The first register is the clock control register and is mandatory.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
index 1486497..ce6a1a0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
@@ -4,11 +4,13 @@
1) Interrupt client nodes
-------------------------
-Nodes that describe devices which generate interrupts must contain an either an
-"interrupts" property or an "interrupts-extended" property. These properties
-contain a list of interrupt specifiers, one per output interrupt. The format of
-the interrupt specifier is determined by the interrupt controller to which the
-interrupts are routed; see section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
Example:
interrupt-parent = <&intc1>;
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
new file mode 100644
index 0000000..6fcedba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+ "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+ TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+ This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+ (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+ TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+ in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+ flags are valid:
+ - IRQ_TYPE_LEVEL_LOW
+ - IRQ_TYPE_LEVEL_HIGH
+ - IRQ_TYPE_EDGE_RISING
+ - IRQ_TYPE_EDGE_FALLING
+ - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+ GPIO controller, the second cell is the flags.
+
+- Keypad
+ This keypad is the same on all variants, supporting up to 96 different
+ keys. The linux-specific properties are modeled on those already existing
+ in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+ bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+ bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+ compatible = "toshiba,tc35893";
+ reg = <0x44>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ tc3589x_gpio {
+ compatible = "toshiba,tc3589x-gpio";
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ tc3589x_keypad {
+ compatible = "toshiba,tc3589x-keypad";
+ interrupts = <6>;
+ debounce-delay-ms = <4>;
+ keypad,num-columns = <8>;
+ keypad,num-rows = <8>;
+ linux,no-autorepeat;
+ linux,wakeup;
+ linux,keymap = <0x0301006b
+ 0x04010066
+ 0x06040072
+ 0x040200d7
+ 0x0303006a
+ 0x0205000e
+ 0x0607008b
+ 0x0500001c
+ 0x0403000b
+ 0x03040034
+ 0x05020067
+ 0x0305006c
+ 0x040500e7
+ 0x0005009e
+ 0x06020073
+ 0x01030039
+ 0x07060069
+ 0x050500d9>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 65f4f7c..ee654e9 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -22,7 +22,7 @@
width of 8 is assumed.
- ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
- "sw" <deprecated> use "ham1" instead
+ "sw" 1-bit Hamming ecc code via software
"hw" <deprecated> use "ham1" instead
"hw-romcode" <deprecated> use "ham1" instead
"ham1" 1-bit Hamming ecc code
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index d0d15ee..ed0d9b9 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -2,6 +2,10 @@
Required properties:
- compatible: should contain "snps,dw-pcie" to identify the core.
+- reg: Should contain the configuration address space.
+- reg-names: Must be "config" for the PCIe configuration space.
+ (The old way of getting the configuration address space from "ranges"
+ is deprecated and should be avoided.)
- #address-cells: set to <3>
- #size-cells: set to <2>
- device_type: set to "pci"
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
new file mode 100644
index 0000000..3d21791
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -0,0 +1,59 @@
+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+ The second entry must be "rc-dbics" for the designware pcie
+ registers
+ The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+ where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+ main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+ #size-cells,
+ #interrupt-cells,
+ device_type,
+ ranges,
+ num-lanes,
+ interrupt-map-mask,
+ interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index 0211c6d..92fae82 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -62,7 +62,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_default>;
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
index 67a4087..bb9753b 100644
--- a/Documentation/dma-buf-sharing.txt
+++ b/Documentation/dma-buf-sharing.txt
@@ -56,10 +56,10 @@
size_t size, int flags,
const char *exp_name)
- If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a
- pointer to the same. It also associates an anonymous file with this buffer,
- so it can be exported. On failure to allocate the dma_buf object, it returns
- NULL.
+ If this succeeds, dma_buf_export_named allocates a dma_buf structure, and
+ returns a pointer to the same. It also associates an anonymous file with this
+ buffer, so it can be exported. On failure to allocate the dma_buf object,
+ it returns NULL.
'exp_name' is the name of exporter - to facilitate information while
debugging.
@@ -76,7 +76,7 @@
drivers and/or processes.
Interface:
- int dma_buf_fd(struct dma_buf *dmabuf)
+ int dma_buf_fd(struct dma_buf *dmabuf, int flags)
This API installs an fd for the anonymous file associated with this buffer;
returns either 'fd', or error.
@@ -157,7 +157,9 @@
"dma_buf->ops->" indirection from the users of this interface.
In struct dma_buf_ops, unmap_dma_buf is defined as
- void (*unmap_dma_buf)(struct dma_buf_attachment *, struct sg_table *);
+ void (*unmap_dma_buf)(struct dma_buf_attachment *,
+ struct sg_table *,
+ enum dma_data_direction);
unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like
map_dma_buf, this API also must be implemented by the exporter.
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 88d5a86..6c0b9f2 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -18,7 +18,7 @@
a remote system.
Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-and s390x architectures.
+s390x and arm architectures.
When the system kernel boots, it reserves a small section of memory for
the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -112,7 +112,7 @@
2) Or use the system kernel binary itself as dump-capture kernel and there is
no need to build a separate dump-capture kernel. This is possible
only with the architectures which support a relocatable kernel. As
- of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
+ of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
kernel.
Building a relocatable kernel is advantageous from the point of view that
@@ -241,6 +241,13 @@
kernel will be aligned to 64Mb, so if the start address is not then
any space below the alignment point will be wasted.
+Dump-capture kernel config options (Arch Dependent, arm)
+----------------------------------------------------------
+
+- To use a relocatable kernel,
+ Enable "AUTO_ZRELADDR" support under "Boot" options:
+
+ AUTO_ZRELADDR=y
Extended crashkernel syntax
===========================
@@ -256,6 +263,10 @@
crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
range=start-[end]
+Please note, on arm, the offset is required.
+ crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
+ range=start-[end]
+
'start' is inclusive and 'end' is exclusive.
For example:
@@ -296,6 +307,12 @@
on the memory consumption of the kdump system. In general this is not
dependent on the memory size of the production system.
+ On arm, use "crashkernel=Y@X". Note that the start address of the kernel
+ will be aligned to 128MiB (0x08000000), so if the start address is not then
+ any space below the alignment point may be overwritten by the dump-capture kernel,
+ which means it is possible that the vmcore is not that precise as expected.
+
+
Load the Dump-capture Kernel
============================
@@ -315,7 +332,8 @@
- Use vmlinux or vmlinuz.gz
For s390x:
- Use image or bzImage
-
+For arm:
+ - Use zImage
If you are using a uncompressed vmlinux image then use following command
to load dump-capture kernel.
@@ -331,6 +349,15 @@
--initrd=<initrd-for-dump-capture-kernel> \
--append="root=<root-dev> <arch-specific-options>"
+If you are using a compressed zImage, then use following command
+to load dump-capture kernel.
+
+ kexec --type zImage -p <dump-capture-kernel-bzImage> \
+ --initrd=<initrd-for-dump-capture-kernel> \
+ --dtb=<dtb-for-dump-capture-kernel> \
+ --append="root=<root-dev> <arch-specific-options>"
+
+
Please note, that --args-linux does not need to be specified for ia64.
It is planned to make this a no-op on that architecture, but for now
it should be omitted
@@ -347,6 +374,9 @@
For s390x:
"1 maxcpus=1 cgroup_disable=memory"
+For arm:
+ "1 maxcpus=1 reset_devices"
+
Notes on loading the dump-capture kernel:
* By default, the ELF headers are stored in ELF64 format to support
diff --git a/Documentation/this_cpu_ops.txt b/Documentation/this_cpu_ops.txt
index 1a4ce7e..0ec9957 100644
--- a/Documentation/this_cpu_ops.txt
+++ b/Documentation/this_cpu_ops.txt
@@ -2,26 +2,26 @@
-------------------
this_cpu operations are a way of optimizing access to per cpu
-variables associated with the *currently* executing processor through
-the use of segment registers (or a dedicated register where the cpu
-permanently stored the beginning of the per cpu area for a specific
-processor).
+variables associated with the *currently* executing processor. This is
+done through the use of segment registers (or a dedicated register where
+the cpu permanently stored the beginning of the per cpu area for a
+specific processor).
-The this_cpu operations add a per cpu variable offset to the processor
-specific percpu base and encode that operation in the instruction
+this_cpu operations add a per cpu variable offset to the processor
+specific per cpu base and encode that operation in the instruction
operating on the per cpu variable.
-This means there are no atomicity issues between the calculation of
+This means that there are no atomicity issues between the calculation of
the offset and the operation on the data. Therefore it is not
-necessary to disable preempt or interrupts to ensure that the
+necessary to disable preemption or interrupts to ensure that the
processor is not changed between the calculation of the address and
the operation on the data.
Read-modify-write operations are of particular interest. Frequently
processors have special lower latency instructions that can operate
-without the typical synchronization overhead but still provide some
-sort of relaxed atomicity guarantee. The x86 for example can execute
-RMV (Read Modify Write) instructions like inc/dec/cmpxchg without the
+without the typical synchronization overhead, but still provide some
+sort of relaxed atomicity guarantees. The x86, for example, can execute
+RMW (Read Modify Write) instructions like inc/dec/cmpxchg without the
lock prefix and the associated latency penalty.
Access to the variable without the lock prefix is not synchronized but
@@ -30,6 +30,38 @@
processor should be accessing that variable and therefore there are no
concurrency issues with other processors in the system.
+Please note that accesses by remote processors to a per cpu area are
+exceptional situations and may impact performance and/or correctness
+(remote write operations) of local RMW operations via this_cpu_*.
+
+The main use of the this_cpu operations has been to optimize counter
+operations.
+
+The following this_cpu() operations with implied preemption protection
+are defined. These operations can be used without worrying about
+preemption and interrupts.
+
+ this_cpu_add()
+ this_cpu_read(pcp)
+ this_cpu_write(pcp, val)
+ this_cpu_add(pcp, val)
+ this_cpu_and(pcp, val)
+ this_cpu_or(pcp, val)
+ this_cpu_add_return(pcp, val)
+ this_cpu_xchg(pcp, nval)
+ this_cpu_cmpxchg(pcp, oval, nval)
+ this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+ this_cpu_sub(pcp, val)
+ this_cpu_inc(pcp)
+ this_cpu_dec(pcp)
+ this_cpu_sub_return(pcp, val)
+ this_cpu_inc_return(pcp)
+ this_cpu_dec_return(pcp)
+
+
+Inner working of this_cpu operations
+------------------------------------
+
On x86 the fs: or the gs: segment registers contain the base of the
per cpu area. It is then possible to simply use the segment override
to relocate a per cpu relative address to the proper per cpu area for
@@ -48,22 +80,21 @@
mov ax, gs:[x]
instead of a sequence of calculation of the address and then a fetch
-from that address which occurs with the percpu operations. Before
+from that address which occurs with the per cpu operations. Before
this_cpu_ops such sequence also required preempt disable/enable to
prevent the kernel from moving the thread to a different processor
while the calculation is performed.
-The main use of the this_cpu operations has been to optimize counter
-operations.
+Consider the following this_cpu operation:
this_cpu_inc(x)
-results in the following single instruction (no lock prefix!)
+The above results in the following single instruction (no lock prefix!)
inc gs:[x]
instead of the following operations required if there is no segment
-register.
+register:
int *y;
int cpu;
@@ -73,10 +104,10 @@
(*y)++;
put_cpu();
-Note that these operations can only be used on percpu data that is
+Note that these operations can only be used on per cpu data that is
reserved for a specific processor. Without disabling preemption in the
surrounding code this_cpu_inc() will only guarantee that one of the
-percpu counters is correctly incremented. However, there is no
+per cpu counters is correctly incremented. However, there is no
guarantee that the OS will not move the process directly before or
after the this_cpu instruction is executed. In general this means that
the value of the individual counters for each processor are
@@ -86,9 +117,9 @@
Per cpu variables are used for performance reasons. Bouncing cache
lines can be avoided if multiple processors concurrently go through
the same code paths. Since each processor has its own per cpu
-variables no concurrent cacheline updates take place. The price that
+variables no concurrent cache line updates take place. The price that
has to be paid for this optimization is the need to add up the per cpu
-counters when the value of the counter is needed.
+counters when the value of a counter is needed.
Special operations:
@@ -100,33 +131,39 @@
of the per cpu variable that belongs to the currently executing
processor. this_cpu_ptr avoids multiple steps that the common
get_cpu/put_cpu sequence requires. No processor number is
-available. Instead the offset of the local per cpu area is simply
-added to the percpu offset.
+available. Instead, the offset of the local per cpu area is simply
+added to the per cpu offset.
+Note that this operation is usually used in a code segment when
+preemption has been disabled. The pointer is then used to
+access local per cpu data in a critical section. When preemption
+is re-enabled this pointer is usually no longer useful since it may
+no longer point to per cpu data of the current processor.
Per cpu variables and offsets
-----------------------------
-Per cpu variables have *offsets* to the beginning of the percpu
+Per cpu variables have *offsets* to the beginning of the per cpu
area. They do not have addresses although they look like that in the
code. Offsets cannot be directly dereferenced. The offset must be
-added to a base pointer of a percpu area of a processor in order to
+added to a base pointer of a per cpu area of a processor in order to
form a valid address.
Therefore the use of x or &x outside of the context of per cpu
operations is invalid and will generally be treated like a NULL
pointer dereference.
-In the context of per cpu operations
+ DEFINE_PER_CPU(int, x);
- x is a per cpu variable. Most this_cpu operations take a cpu
- variable.
+In the context of per cpu operations the above implies that x is a per
+cpu variable. Most this_cpu operations take a cpu variable.
- &x is the *offset* a per cpu variable. this_cpu_ptr() takes
- the offset of a per cpu variable which makes this look a bit
- strange.
+ int __percpu *p = &x;
+&x and hence p is the *offset* of a per cpu variable. this_cpu_ptr()
+takes the offset of a per cpu variable which makes this look a bit
+strange.
Operations on a field of a per cpu structure
@@ -152,7 +189,7 @@
struct s __percpu *ps = &p;
- z = this_cpu_dec(ps->m);
+ this_cpu_dec(ps->m);
z = this_cpu_inc_return(ps->n);
@@ -172,29 +209,52 @@
Variants of this_cpu ops
-------------------------
-this_cpu ops are interrupt safe. Some architecture do not support
+this_cpu ops are interrupt safe. Some architectures do not support
these per cpu local operations. In that case the operation must be
replaced by code that disables interrupts, then does the operations
-that are guaranteed to be atomic and then reenable interrupts. Doing
+that are guaranteed to be atomic and then re-enable interrupts. Doing
so is expensive. If there are other reasons why the scheduler cannot
change the processor we are executing on then there is no reason to
-disable interrupts. For that purpose the __this_cpu operations are
-provided. For example.
+disable interrupts. For that purpose the following __this_cpu operations
+are provided.
- __this_cpu_inc(x);
+These operations have no guarantee against concurrent interrupts or
+preemption. If a per cpu variable is not used in an interrupt context
+and the scheduler cannot preempt, then they are safe. If any interrupts
+still occur while an operation is in progress and if the interrupt too
+modifies the variable, then RMW actions can not be guaranteed to be
+safe.
-Will increment x and will not fallback to code that disables
+ __this_cpu_add()
+ __this_cpu_read(pcp)
+ __this_cpu_write(pcp, val)
+ __this_cpu_add(pcp, val)
+ __this_cpu_and(pcp, val)
+ __this_cpu_or(pcp, val)
+ __this_cpu_add_return(pcp, val)
+ __this_cpu_xchg(pcp, nval)
+ __this_cpu_cmpxchg(pcp, oval, nval)
+ __this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+ __this_cpu_sub(pcp, val)
+ __this_cpu_inc(pcp)
+ __this_cpu_dec(pcp)
+ __this_cpu_sub_return(pcp, val)
+ __this_cpu_inc_return(pcp)
+ __this_cpu_dec_return(pcp)
+
+
+Will increment x and will not fall-back to code that disables
interrupts on platforms that cannot accomplish atomicity through
address relocation and a Read-Modify-Write operation in the same
instruction.
-
&this_cpu_ptr(pp)->n vs this_cpu_ptr(&pp->n)
--------------------------------------------
The first operation takes the offset and forms an address and then
-adds the offset of the n field.
+adds the offset of the n field. This may result in two add
+instructions emitted by the compiler.
The second one first adds the two offsets and then does the
relocation. IMHO the second form looks cleaner and has an easier time
@@ -202,4 +262,73 @@
this_cpu_read() and friends are used.
-Christoph Lameter, April 3rd, 2013
+Remote access to per cpu data
+------------------------------
+
+Per cpu data structures are designed to be used by one cpu exclusively.
+If you use the variables as intended, this_cpu_ops() are guaranteed to
+be "atomic" as no other CPU has access to these data structures.
+
+There are special cases where you might need to access per cpu data
+structures remotely. It is usually safe to do a remote read access
+and that is frequently done to summarize counters. Remote write access
+something which could be problematic because this_cpu ops do not
+have lock semantics. A remote write may interfere with a this_cpu
+RMW operation.
+
+Remote write accesses to percpu data structures are highly discouraged
+unless absolutely necessary. Please consider using an IPI to wake up
+the remote CPU and perform the update to its per cpu area.
+
+To access per-cpu data structure remotely, typically the per_cpu_ptr()
+function is used:
+
+
+ DEFINE_PER_CPU(struct data, datap);
+
+ struct data *p = per_cpu_ptr(&datap, cpu);
+
+This makes it explicit that we are getting ready to access a percpu
+area remotely.
+
+You can also do the following to convert the datap offset to an address
+
+ struct data *p = this_cpu_ptr(&datap);
+
+but, passing of pointers calculated via this_cpu_ptr to other cpus is
+unusual and should be avoided.
+
+Remote access are typically only for reading the status of another cpus
+per cpu data. Write accesses can cause unique problems due to the
+relaxed synchronization requirements for this_cpu operations.
+
+One example that illustrates some concerns with write operations is
+the following scenario that occurs because two per cpu variables
+share a cache-line but the relaxed synchronization is applied to
+only one process updating the cache-line.
+
+Consider the following example
+
+
+ struct test {
+ atomic_t a;
+ int b;
+ };
+
+ DEFINE_PER_CPU(struct test, onecacheline);
+
+There is some concern about what would happen if the field 'a' is updated
+remotely from one processor and the local processor would use this_cpu ops
+to update field b. Care should be taken that such simultaneous accesses to
+data within the same cache line are avoided. Also costly synchronization
+may be necessary. IPIs are generally recommended in such scenarios instead
+of a remote write to the per cpu area of another processor.
+
+Even in cases where the remote writes are rare, please bear in
+mind that a remote write will evict the cache line from the processor
+that most likely will access it. If the processor wakes up and finds a
+missing local cache line of a per cpu area, its performance and hence
+the wake up times will be affected.
+
+Christoph Lameter, August 4th, 2014
+Pranith Kumar, Aug 2nd, 2014
diff --git a/Documentation/x86/tlb.txt b/Documentation/x86/tlb.txt
index 2b3a82e..39d1723 100644
--- a/Documentation/x86/tlb.txt
+++ b/Documentation/x86/tlb.txt
@@ -35,7 +35,7 @@
profiles. If you believe that individual invalidations being
called too often, you can lower the tunable:
- /sys/debug/kernel/x86/tlb_single_page_flush_ceiling
+ /sys/kernel/debug/x86/tlb_single_page_flush_ceiling
This will cause us to do the global flush for more cases.
Lowering it to 0 will disable the use of the individual flushes.
diff --git a/MAINTAINERS b/MAINTAINERS
index aefa948..cf24bb5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1277,9 +1277,15 @@
ARM/Rockchip SoC support
M: Heiko Stuebner <heiko@sntech.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-rockchip@lists.infradead.org
S: Maintained
+F: arch/arm/boot/dts/rk3*
F: arch/arm/mach-rockchip/
+F: drivers/clk/rockchip/
+F: drivers/i2c/busses/i2c-rk3x.c
F: drivers/*/*rockchip*
+F: drivers/*/*/*rockchip*
+F: sound/soc/rockchip/
ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
@@ -1843,6 +1849,12 @@
F: Documentation/filesystems/befs.txt
F: fs/befs/
+BECKHOFF CX5020 ETHERCAT MASTER DRIVER
+M: Dariusz Marcinkiewicz <reksio@newterm.pl>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/ec_bhf.c
+
BFS FILE SYSTEM
M: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
S: Maintained
@@ -2059,7 +2071,7 @@
F: drivers/scsi/bnx2i/
BROADCOM KONA GPIO DRIVER
-M: Markus Mayer <markus.mayer@linaro.org>
+M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
S: Supported
F: drivers/gpio/gpio-bcm-kona.c
@@ -3115,6 +3127,17 @@
F: include/uapi/drm/tegra_drm.h
F: Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+DRM DRIVERS FOR RENESAS
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: dri-devel@lists.freedesktop.org
+L: linux-sh@vger.kernel.org
+T: git git://people.freedesktop.org/~airlied/linux
+S: Supported
+F: drivers/gpu/drm/rcar-du/
+F: drivers/gpu/drm/shmobile/
+F: include/linux/platform_data/rcar-du.h
+F: include/linux/platform_data/shmob_drm.h
+
DSBR100 USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@gmail.com>
L: linux-media@vger.kernel.org
@@ -3843,10 +3866,13 @@
FREESCALE SOC SOUND DRIVERS
M: Timur Tabi <timur@tabi.org>
+M: Nicolin Chen <nicoleotsuka@gmail.com>
+M: Xiubo Li <Li.Xiubo@freescale.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: sound/soc/fsl/fsl*
+F: sound/soc/fsl/imx*
F: sound/soc/fsl/mpc8610_hpcd.c
FREEVXFS FILESYSTEM
@@ -4446,6 +4472,13 @@
F: include/uapi/linux/i2c.h
F: include/uapi/linux/i2c-*.h
+I2C ACPI SUPPORT
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+L: linux-acpi@vger.kernel.org
+S: Maintained
+F: drivers/i2c/i2c-acpi.c
+
I2C-TAOS-EVM DRIVER
M: Jean Delvare <jdelvare@suse.de>
L: linux-i2c@vger.kernel.org
@@ -5972,6 +6005,12 @@
S: Maintained
F: drivers/media/radio/radio-mr800.c
+MRF24J40 IEEE 802.15.4 RADIO DRIVER
+M: Alan Ott <alan@signal11.us>
+L: linux-wpan@vger.kernel.org
+S: Maintained
+F: drivers/net/ieee802154/mrf24j40.c
+
MSI LAPTOP SUPPORT
M: "Lee, Chun-Yi" <jlee@suse.com>
L: platform-driver-x86@vger.kernel.org
@@ -6858,6 +6897,14 @@
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c
+PCI DRIVER FOR TI DRA7XX
+M: Kishon Vijay Abraham I <kishon@ti.com>
+L: linux-omap@vger.kernel.org
+L: linux-pci@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/ti-pci.txt
+F: drivers/pci/host/pci-dra7xx.c
+
PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au>
L: linux-pci@vger.kernel.org
@@ -9515,6 +9562,14 @@
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
+USB OVER IP DRIVER
+M: Valentina Manea <valentina.manea.m@gmail.com>
+M: Shuah Khan <shuah.kh@samsung.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/usbip/
+F: tools/usb/usbip/
+
USB PEGASUS DRIVER
M: Petko Manolov <petkan@nucleusys.com>
L: linux-usb@vger.kernel.org
diff --git a/Makefile b/Makefile
index e432442..2893d7f 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 17
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 5ebab58..f05bdb4 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -500,10 +500,14 @@
#define outb_p outb
#define outw_p outw
#define outl_p outl
-#define readb_relaxed(addr) __raw_readb(addr)
-#define readw_relaxed(addr) __raw_readw(addr)
-#define readl_relaxed(addr) __raw_readl(addr)
-#define readq_relaxed(addr) __raw_readq(addr)
+#define readb_relaxed(addr) __raw_readb(addr)
+#define readw_relaxed(addr) __raw_readw(addr)
+#define readl_relaxed(addr) __raw_readl(addr)
+#define readq_relaxed(addr) __raw_readq(addr)
+#define writeb_relaxed(b, addr) __raw_writeb(b, addr)
+#define writew_relaxed(b, addr) __raw_writew(b, addr)
+#define writel_relaxed(b, addr) __raw_writel(b, addr)
+#define writeq_relaxed(b, addr) __raw_writeq(b, addr)
#define mmiowb()
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index f2c9440..c509d30 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -3,7 +3,7 @@
#include <uapi/asm/unistd.h>
-#define NR_SYSCALLS 508
+#define NR_SYSCALLS 511
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_STAT64
diff --git a/arch/alpha/include/uapi/asm/unistd.h b/arch/alpha/include/uapi/asm/unistd.h
index 53ae7bb..d214a035 100644
--- a/arch/alpha/include/uapi/asm/unistd.h
+++ b/arch/alpha/include/uapi/asm/unistd.h
@@ -469,5 +469,8 @@
#define __NR_process_vm_writev 505
#define __NR_kcmp 506
#define __NR_finit_module 507
+#define __NR_sched_setattr 508
+#define __NR_sched_getattr 509
+#define __NR_renameat2 510
#endif /* _UAPI_ALPHA_UNISTD_H */
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index dca9b3f..24789713 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -526,6 +526,9 @@
.quad sys_process_vm_writev /* 505 */
.quad sys_kcmp
.quad sys_finit_module
+ .quad sys_sched_setattr
+ .quad sys_sched_getattr
+ .quad sys_renameat2 /* 510 */
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 4670afc..e88ddbf 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -581,6 +581,7 @@
tot_sz -= sz;
}
}
+EXPORT_SYMBOL(flush_icache_range);
/*
* General purpose helper to make I and D cache lines consistent.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c49a775..3c84006 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -387,6 +387,7 @@
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
select MFD_SYSCON
+ select SOC_BUS
help
Support for Cirrus Logic 711x/721x/731x based boards.
@@ -888,6 +889,8 @@
source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-meson/Kconfig"
+
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-moxart/Kconfig"
@@ -1405,6 +1408,15 @@
for (multi-)cluster based systems, such as big.LITTLE based
systems.
+config MCPM_QUAD_CLUSTER
+ bool
+ depends on MCPM
+ help
+ To avoid wasting resources unnecessarily, MCPM only supports up
+ to 2 clusters by default.
+ Platforms with 3 or 4 clusters that use MCPM must select this
+ option to allow the additional clusters to be managed.
+
config BIG_LITTLE
bool "big.LITTLE support (Experimental)"
depends on CPU_V7 && SMP
@@ -1983,8 +1995,6 @@
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || PM_SLEEP_SMP)
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b11ad54..2dc9f6cd 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -223,14 +223,6 @@
Say Y here if you want kernel low-level debugging support
on HI3716 UART.
- config DEBUG_HIX5HD2_UART
- bool "Hisilicon Hix5hd2 Debug UART"
- depends on ARCH_HIX5HD2
- select DEBUG_UART_PL01X
- help
- Say Y here if you want kernel low-level debugging support
- on Hix5hd2 UART.
-
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -239,6 +231,22 @@
Say Y here if you want the debug print routines to direct
their output to the UART on Highbank based devices.
+ config DEBUG_HIP04_UART
+ bool "Hisilicon HiP04 Debug UART"
+ depends on ARCH_HIP04
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HIP04 UART.
+
+ config DEBUG_HIX5HD2_UART
+ bool "Hisilicon Hix5hd2 Debug UART"
+ depends on ARCH_HIX5HD2
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Hix5hd2 UART.
+
config DEBUG_IMX1_UART
bool "i.MX1 Debug UART"
depends on SOC_IMX1
@@ -348,6 +356,13 @@
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
+ config DEBUG_MESON_UARTAO
+ bool "Kernel low-level debugging via Meson6 UARTAO"
+ depends on ARCH_MESON
+ help
+ Say Y here if you want kernel low-lever debugging support
+ on Amlogic Meson6 based platforms on the UARTAO.
+
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
@@ -834,6 +849,14 @@
Say Y here if you want kernel low-level debugging support
on Ux500 based platforms.
+ config DEBUG_MT6589_UART0
+ bool "Mediatek mt6589 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt6589 based platforms on UART0.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -1011,6 +1034,7 @@
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+ default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/efm32.S" if DEBUG_LL_UART_EFM32
@@ -1075,6 +1099,7 @@
default 0x10126000 if DEBUG_RK3X_UART1
default 0x101f1000 if ARCH_VERSATILE
default 0x101fb000 if DEBUG_NOMADIK_UART
+ default 0x11006000 if DEBUG_MT6589_UART0
default 0x16000000 if ARCH_INTEGRATOR
default 0x18000300 if DEBUG_BCM_5301X
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1106,9 +1131,11 @@
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xd0012000 if DEBUG_MVEBU_UART
+ default 0xc81004c0 if DEBUG_MESON_UARTAO
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
+ default 0xe4007000 if DEBUG_HIP04_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
@@ -1125,7 +1152,7 @@
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_VIRT
@@ -1137,6 +1164,7 @@
default 0xf01fb000 if DEBUG_NOMADIK_UART
default 0xf0201000 if DEBUG_BCM2835
default 0xf1000300 if DEBUG_BCM_5301X
+ default 0xf1006000 if DEBUG_MT6589_UART0
default 0xf11f1000 if ARCH_VERSATILE
default 0xf1600000 if ARCH_INTEGRATOR
default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1152,6 +1180,7 @@
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
default 0xf7fc9000 if DEBUG_BERLIN_UART
+ default 0xf8007000 if DEBUG_HIP04_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xfa71e000 if DEBUG_QCOM_UARTDM
@@ -1162,6 +1191,7 @@
default 0xfd012000 if ARCH_MV78XX0
default 0xfde12000 if ARCH_DOVE
default 0xfe012000 if ARCH_ORION5X
+ default 0xf31004c0 if DEBUG_MESON_UARTAO
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1193,7 +1223,7 @@
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_8250_SHIFT
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 0ce9d0f..320aa57 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -168,6 +168,7 @@
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
+machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MSM) += msm
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..22aba85 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,6 +90,7 @@
dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
@@ -361,7 +362,6 @@
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
- r8a7740-armadillo800eva-reference.dtb \
r8a7779-marzen.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
@@ -372,6 +372,7 @@
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
+ r8a7740-armadillo800eva.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index bde1777..d9d9869 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -7,9 +7,6 @@
*/
/ {
- model = "TI AM335x BeagleBone";
- compatible = "ti,am335x-bone", "ti,am33xx";
-
cpus {
cpu@0 {
cpu0-supply = <&dcdc2_reg>;
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 94ee427..83d40f7 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -10,6 +10,11 @@
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+/ {
+ model = "TI AM335x BeagleBone";
+ compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 305975d..901739f 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -10,6 +10,11 @@
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+/ {
+ model = "TI AM335x BeagleBone Black";
+ compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 97f603c..e09b1af 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -89,6 +89,7 @@
prm: prm@4ae06000 {
compatible = "ti,dra7-prm";
reg = <0x4ae06000 0x3000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
prm_clocks: clocks {
#address-cells = <1>;
@@ -245,7 +246,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -256,7 +257,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -267,7 +268,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -278,7 +279,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -289,7 +290,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -300,7 +301,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
@@ -311,7 +312,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
@@ -322,7 +323,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 6d6d23c..adadaf9 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -134,6 +134,8 @@
i2c@13860000 {
pinctrl-0 = <&i2c0_bus>;
pinctrl-names = "default";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
status = "okay";
usb3503: usb3503@08 {
@@ -148,6 +150,10 @@
max77686: pmic@09 {
compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
reg = <0x09>;
#clock-cells = <1>;
@@ -368,4 +374,11 @@
samsung,pins = "gpx1-3";
samsung,pin-pud = <0>;
};
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
new file mode 100644
index 0000000..40a9e33
--- /dev/null
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+ /* memory bus is 64-bit */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Hisilicon D01 Development Board";
+ compatible = "hisilicon,hip04-d01";
+
+ memory@00000000,10000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
+ <0x00000004 0xc0000000 0x00000003 0x40000000>;
+ };
+
+ soc {
+ uart0: uart@4007000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
new file mode 100644
index 0000000..93b6c90
--- /dev/null
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,267 @@
+/*
+ * Hisilicon Ltd. HiP04 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ /* memory bus is 64-bit */
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ bootwrapper {
+ compatible = "hisilicon,hip04-bootwrapper";
+ boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ core2 {
+ cpu = <&CPU10>;
+ };
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ core2 {
+ cpu = <&CPU14>;
+ };
+ core3 {
+ cpu = <&CPU15>;
+ };
+ };
+ };
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ };
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <2>;
+ };
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <3>;
+ };
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ };
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ };
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x102>;
+ };
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x103>;
+ };
+ CPU8: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x200>;
+ };
+ CPU9: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x201>;
+ };
+ CPU10: cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x202>;
+ };
+ CPU11: cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x203>;
+ };
+ CPU12: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x300>;
+ };
+ CPU13: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x301>;
+ };
+ CPU14: cpu@302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x302>;
+ };
+ CPU15: cpu@303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x303>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ clk_50m: clk_50m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ clk_168m: clk_168m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <168000000>;
+ };
+
+ soc {
+ /* It's a 32-bit SoC. */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0 0 0xe0000000 0x10000000>;
+
+ gic: interrupt-controller@c01000 {
+ compatible = "hisilicon,hip04-intc";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>;
+
+ reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+ <0xc04000 0x2000>, <0xc06000 0x2000>;
+ };
+
+ sysctrl: sysctrl {
+ compatible = "hisilicon,sysctrl";
+ reg = <0x3e00000 0x00100000>;
+ };
+
+ fabric: fabric {
+ compatible = "hisilicon,hip04-fabric";
+ reg = <0x302a000 0x1000>;
+ };
+
+ dual_timer0: dual_timer@3000000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x3000000 0x1000>;
+ interrupts = <0 224 4>;
+ clocks = <&clk_50m>, <&clk_50m>;
+ clock-names = "apb_pclk";
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <0 64 4>,
+ <0 65 4>,
+ <0 66 4>,
+ <0 67 4>,
+ <0 68 4>,
+ <0 69 4>,
+ <0 70 4>,
+ <0 71 4>,
+ <0 72 4>,
+ <0 73 4>,
+ <0 74 4>,
+ <0 75 4>,
+ <0 76 4>,
+ <0 77 4>,
+ <0 78 4>,
+ <0 79 4>;
+ };
+
+ uart0: uart@4007000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x4007000 0x1000>;
+ interrupts = <0 381 4>;
+ clocks = <&clk_168m>;
+ clock-names = "uartclk";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ sata0: sata@a000000 {
+ compatible = "hisilicon,hisi-ahci";
+ reg = <0xa000000 0x1000000>;
+ interrupts = <0 372 4>;
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index f1bbf9a..82d623d 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -28,6 +28,12 @@
MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
>;
};
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
+ >;
+ };
};
};
@@ -38,6 +44,8 @@
pmic: mc34708@8 {
compatible = "fsl,mc34708";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <23 0x8>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 64fa27b..c6c58c1 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -731,7 +731,7 @@
compatible = "fsl,imx53-vpu";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
- clocks = <&clks IMX5_CLK_VPU_GATE>,
+ clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
<&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
resets = <&src 1>;
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index c8e51dd..7159854 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -58,7 +58,7 @@
sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
+ model = "On-board SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
@@ -181,11 +181,13 @@
};
&usbh1 {
+ disable-over-current;
vbus-supply = <®_usbh1_vbus>;
status = "okay";
};
&usbotg {
+ disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
vbus-supply = <®_usbotg_vbus>;
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 8c1cb53..4fa2543 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -119,7 +119,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
+ phy-reset-gpios = <&gpio1 25 0>;
phy-supply = <&vgen2_1v2_eth>;
status = "okay";
};
@@ -339,6 +339,7 @@
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e8e7816..6a524ca 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -61,7 +61,7 @@
sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
+ model = "Integrated SPDIF";
/* IMX6 doesn't implement this yet */
spdif-controller = <&spdif>;
spdif-out;
@@ -130,16 +130,23 @@
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
+ pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+ fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+ };
+
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
};
- pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+ pinctrl_cubox_i_usbotg: cubox-i-usbotg {
/*
- * The Cubox-i pulls this low, but as it's pointless
+ * The Cubox-i pulls ID low, but as it's pointless
* leaving it as a pull-up, even if it is just 10uA.
*/
- fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
};
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
};
&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
vbus-supply = <®_usbh1_vbus>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+ pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
vbus-supply = <®_usbotg_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index d160666..db9f45b 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -17,7 +17,7 @@
enet {
pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
/* AR8035 reset */
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index 3e0b816..bb9c6b7 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -78,7 +78,7 @@
#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1
#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0
#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0
#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0
#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0
#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0
@@ -96,7 +96,7 @@
#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0
#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0
#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0
#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0
#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0
#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0
@@ -213,7 +213,7 @@
#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1
#define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2
#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0
#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0
#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0
#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0
@@ -254,7 +254,7 @@
#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0
#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1
#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0
#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0
#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0
#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0
@@ -352,7 +352,7 @@
#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0
#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1
#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0
#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1
#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0
#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0
@@ -404,7 +404,7 @@
#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0
#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0
#define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0
#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0
#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0
#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,7 +423,7 @@
#define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0
#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0
#define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0
#define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1
#define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1
#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0
@@ -815,7 +815,7 @@
#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0
#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0
#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0
#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0
#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0
#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0
@@ -957,7 +957,7 @@
#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0
#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0
#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0
#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1
#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2
#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -1236,7 +1236,7 @@
#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1
#define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0
#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0
#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0
#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0
#define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0
@@ -1315,7 +1315,7 @@
#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0
#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0
#define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0
#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0
#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0
#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0
@@ -1409,7 +1409,7 @@
#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0
#define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0
#define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0
#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0
#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0
#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1510,7 +1510,7 @@
#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0
#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0
#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0
#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0
#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0
#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3c3e6da..a9aae88 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -292,6 +292,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&gpio1 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b15f1a7..1fe45d1 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -353,7 +353,7 @@
};
twl_power: power {
- compatible = "ti,twl4030-power-n900";
+ compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
ti,use_poweroff;
};
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 575a49b..3136ed1 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -97,6 +97,7 @@
prm: prm@48306000 {
compatible = "ti,omap3-prm";
reg = <0x48306000 0x4000>;
+ interrupts = <11>;
prm_clocks: clocks {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 02f69f4..9bad94e 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -107,7 +107,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <1 0 0x08000000>;
- ti,nand-ecc-opt = "ham1";
+ ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 8cfa3c8..1505135 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -8,9 +8,6 @@
#include "elpida_ecb240abacn.dtsi"
/ {
- model = "TI OMAP4 PandaBoard";
- compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 816d1c9..2f1dabc 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -10,6 +10,11 @@
#include "omap4460.dtsi"
#include "omap4-panda-common.dtsi"
+/ {
+ model = "TI OMAP4 PandaBoard-ES";
+ compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
ti,model = "PandaBoardES";
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 6189a8b..a0e28b2 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -9,3 +9,8 @@
#include "omap443x.dtsi"
#include "omap4-panda-common.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 69408b5..7375d44 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -129,6 +129,7 @@
prm: prm@4a306000 {
compatible = "ti,omap4-prm";
reg = <0x4a306000 0x3000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
prm_clocks: clocks {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index fc8df17..df0a09b 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -131,6 +131,7 @@
prm: prm@4ae06000 {
compatible = "ti,omap5-prm";
reg = <0x4ae06000 0x3000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
prm_clocks: clocks {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index e67a23b..58c2746 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -367,10 +367,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x100>;
clocks = <&dpll_core_h12x2_ck>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
gpu_l3_iclk: gpu_l3_iclk {
@@ -383,10 +385,12 @@
l4_root_clk_div: l4_root_clk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <8>;
+ reg = <0x100>;
clocks = <&l3_iclk_div>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
slimbus1_slimbus_clk: slimbus1_slimbus_clk {
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 2070546..a3ed23c 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -43,6 +43,10 @@
clock-frequency = <48000000>;
};
+&mtu2 {
+ status = "ok";
+};
+
&i2c2 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index bdee225..801a556 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -229,6 +229,16 @@
status = "disabled";
};
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
deleted file mode 100644
index ee9e7d5..0000000
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "armadillo 800 eva reference";
- compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
- aliases {
- serial1 = &scifa1;
- };
-
- chosen {
- bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x20000000>;
- };
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sdhi0: regulator@1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator@2 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sdhi0>;
-
- enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
- gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
- states = <3300000 0
- 1800000 1>;
-
- enable-active-high;
- };
-
- reg_5p0v: regulator@3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5.0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "SW3";
- gpio-key,wakeup;
- };
-
- back-key {
- gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_BACK>;
- label = "SW4";
- };
-
- menu-key {
- gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "SW5";
- };
-
- home-key {
- gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOME>;
- label = "SW6";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led3 {
- gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
- label = "LED3";
- };
- led4 {
- gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
- label = "LED4";
- };
- led5 {
- gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
- label = "LED5";
- };
- led6 {
- gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
- label = "LED6";
- };
- };
-
- i2c2: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
- &pfc 91 GPIO_ACTIVE_HIGH /* scl */
- >;
- i2c-gpio,delay-us = <5>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
- default-brightness-level = <9>;
- pinctrl-0 = <&backlight_pins>;
- pinctrl-names = "default";
- power-supply = <®_5p0v>;
- enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
- };
-
- sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "i2s";
-
- simple-audio-card,cpu {
- sound-dai = <&sh_fsi2 0>;
- bitclock-inversion;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8978>;
- bitclock-master;
- frame-master;
- system-clock-frequency = <12288000>;
- };
- };
-};
-
-ðer {
- pinctrl-0 = <ðer_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy0>;
- status = "ok";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&i2c0 {
- status = "okay";
- touchscreen@55 {
- compatible = "sitronix,st1232";
- reg = <0x55>;
- interrupt-parent = <&irqpin1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&st1232_pins>;
- pinctrl-names = "default";
- gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
- };
-
- wm8978: wm8978@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8978";
- reg = <0x1a>;
- };
-};
-
-&i2c2 {
- status = "okay";
- rtc@30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
-};
-
-&pfc {
- ether_pins: ether {
- renesas,groups = "gether_mii", "gether_int";
- renesas,function = "gether";
- };
-
- scifa1_pins: serial1 {
- renesas,groups = "scifa1_data";
- renesas,function = "scifa1";
- };
-
- st1232_pins: touchscreen {
- renesas,groups = "intc_irq10";
- renesas,function = "intc";
- };
-
- backlight_pins: backlight {
- renesas,groups = "tpu0_to2_1";
- renesas,function = "tpu0";
- };
-
- mmc0_pins: mmc0 {
- renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
- renesas,function = "mmc0";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
- renesas,function = "sdhi0";
- };
-
- fsia_pins: sounda {
- renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
- "fsia_data_in_1", "fsia_data_out_0";
- renesas,function = "fsia";
- };
-};
-
-&tpu {
- status = "okay";
-};
-
-&mmcif0 {
- pinctrl-0 = <&mmc0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <®_3p3v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&scifa1 {
- pinctrl-0 = <&scifa1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- bus-width = <4>;
- cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&sh_fsi2 {
- pinctrl-0 = <&fsia_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a06a11e..effb7b4 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -10,10 +10,18 @@
/dts-v1/;
#include "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "armadillo 800 eva";
- compatible = "renesas,armadillo800eva";
+ compatible = "renesas,armadillo800eva", "renesas,r8a7740";
+
+ aliases {
+ serial1 = &scifa1;
+ };
chosen {
bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
@@ -23,4 +31,270 @@
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sdhi0: regulator@1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator@2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sdhi0>;
+
+ enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+ states = <3300000 0
+ 1800000 1>;
+
+ enable-active-high;
+ };
+
+ reg_5p0v: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5.0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "SW3";
+ gpio-key,wakeup;
+ };
+
+ back-key {
+ gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "SW4";
+ };
+
+ menu-key {
+ gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "SW5";
+ };
+
+ home-key {
+ gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "SW6";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led3 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
+ };
+ led4 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ label = "LED4";
+ };
+ led5 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ label = "LED5";
+ };
+ led6 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ label = "LED6";
+ };
+ };
+
+ i2c2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+ &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+ default-brightness-level = <9>;
+ pinctrl-0 = <&backlight_pins>;
+ pinctrl-names = "default";
+ power-supply = <®_5p0v>;
+ enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ bitclock-inversion;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8978>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <12288000>;
+ };
+ };
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy0>;
+ status = "ok";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&extal1_clk {
+ clock-frequency = <25000000>;
+};
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+&fsibck_clk {
+ clock-frequency = <12288000>;
+};
+&cpg_clocks {
+ renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
+};
+
+&cmt1 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "okay";
+ touchscreen@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&st1232_pins>;
+ pinctrl-names = "default";
+ gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+ };
+
+ wm8978: wm8978@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8978";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+};
+
+&pfc {
+ ether_pins: ether {
+ renesas,groups = "gether_mii", "gether_int";
+ renesas,function = "gether";
+ };
+
+ scifa1_pins: serial1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
+ };
+
+ st1232_pins: touchscreen {
+ renesas,groups = "intc_irq10";
+ renesas,function = "intc";
+ };
+
+ backlight_pins: backlight {
+ renesas,groups = "tpu0_to2_1";
+ renesas,function = "tpu0";
+ };
+
+ mmc0_pins: mmc0 {
+ renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+ renesas,function = "mmc0";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
+ "fsia_data_in_1", "fsia_data_out_0";
+ renesas,function = "fsia";
+ };
+};
+
+&tpu {
+ status = "okay";
+};
+
+&mmcif0 {
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&scifa1 {
+ pinctrl-0 = <&scifa1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ bus-width = <4>;
+ cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index bda18fb..d46c213 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -10,6 +10,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/r8a7740-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -40,6 +41,18 @@
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmt1: timer@e6138000 {
+ compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
+ reg = <0xe6138000 0x170>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x3f>;
+
+ status = "disabled";
+ };
+
/* irqpin0: IRQ0 - IRQ7 */
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
@@ -125,7 +138,7 @@
reg = <0xe9a00000 0x800>,
<0xe9a01800 0x800>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
- /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
+ clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
@@ -141,6 +154,7 @@
0 202 IRQ_TYPE_LEVEL_HIGH
0 203 IRQ_TYPE_LEVEL_HIGH
0 204 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
status = "disabled";
};
@@ -153,6 +167,7 @@
0 71 IRQ_TYPE_LEVEL_HIGH
0 72 IRQ_TYPE_LEVEL_HIGH
0 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
status = "disabled";
};
@@ -160,6 +175,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c40000 0x100>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -167,6 +184,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c50000 0x100>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -174,6 +193,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -181,6 +202,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c70000 0x100>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -188,6 +211,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c80000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -195,6 +220,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -202,6 +229,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -209,6 +238,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -216,6 +247,8 @@
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -239,6 +272,7 @@
tpu: pwm@e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
+ clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
status = "disabled";
#pwm-cells = <3>;
};
@@ -248,6 +282,7 @@
reg = <0xe6bd0000 0x100>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_MMC>;
status = "disabled";
};
@@ -257,6 +292,7 @@
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
0 118 IRQ_TYPE_LEVEL_HIGH
0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -268,6 +304,7 @@
interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
0 122 IRQ_TYPE_LEVEL_HIGH
0 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -279,6 +316,7 @@
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
0 126 IRQ_TYPE_LEVEL_HIGH
0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -289,6 +327,186 @@
compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
reg = <0xfe1f0000 0x400>;
interrupts = <0 9 0x4>;
+ clocks = <&mstp3_clks R8A7740_CLK_FSI>;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* External root clock */
+ extalr_clk: extalr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "extalr";
+ };
+ extal1_clk: extal1_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "extal1";
+ };
+ extal2_clk: extal2_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "extal2";
+ };
+ dv_clk: dv_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "dv";
+ };
+ fsiack_clk: fsiack_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "fsiack";
+ };
+ fsibck_clk: fsibck_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "fsibck";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7740-cpg-clocks";
+ reg = <0xe6150000 0x10000>;
+ clocks = <&extal1_clk>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "system", "pllc0", "pllc1",
+ "pllc2", "r",
+ "usb24s",
+ "i", "zg", "b", "m1", "hp",
+ "hpp", "usbp", "s", "zb", "m3",
+ "cp";
+ };
+
+ /* Variable factor clocks (DIV6) */
+ sub_clk: sub_clk@e6150080 {
+ compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150080 4>;
+ clocks = <&pllc1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sub";
+ };
+
+ /* Fixed factor clocks */
+ pllc1_div2_clk: pllc1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pllc1_div2";
+ };
+ extal1_div2_clk: extal1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal1_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "extal1_div2";
+ };
+
+ /* Gate clocks */
+ subck_clks: subck_clks@e6150080 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150080 4>;
+ clocks = <&sub_clk>, <&sub_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
+ >;
+ clock-output-names =
+ "subck", "subck2";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150134 4>, <0xe6150038 4>;
+ clocks = <&cpg_clocks R8A7740_CLK_S>,
+ <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_B>,
+ <&sub_clk>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_B>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
+ R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
+ R8A7740_CLK_LCDC0
+ >;
+ clock-output-names =
+ "ceu21", "ceu20", "tmu0", "lcdc1", "iic0",
+ "tmu1", "lcdc0";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150138 4>, <0xe6150040 4>;
+ clocks = <&sub_clk>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7
+ R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
+ R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
+ R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
+ R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1
+ R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3
+ R8A7740_CLK_SCIFA4
+ >;
+ clock-output-names =
+ "scifa6", "scifa7", "dmac1", "dmac2", "dmac3",
+ "usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
+ "scifa2", "scifa3", "scifa4";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe615013c 4>, <0xe6150048 4>;
+ clocks = <&cpg_clocks R8A7740_CLK_R>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
+ R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
+ R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
+ >;
+ clock-output-names =
+ "cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1",
+ "mmc", "gether", "tpu0";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150140 4>, <0xe615004c 4>;
+ clocks = <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_USBH R8A7740_CLK_SDHI2
+ R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
+ >;
+ clock-output-names =
+ "usbhost", "sdhi2", "usbfunc", "usphy";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index ecfdf4b..315ec62 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -23,8 +23,14 @@
interrupt-parent = <&gic>;
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a9";
+ reg = <0>;
+ clock-frequency = <800000000>;
};
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 5745555..c160404 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -78,6 +78,10 @@
clock-frequency = <31250000>;
};
+&tmu0 {
+ status = "okay";
+};
+
&pfc {
lan0_pins: lan0 {
intc {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 58d0d95..72891e5 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -266,6 +266,48 @@
reg = <0xffc48000 0x38>;
};
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+ reg = <0xffd80000 0x30>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu1: timer@ffd81000 {
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+ reg = <0xffd81000 0x30>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu2: timer@ffd82000 {
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+ reg = <0xffd82000 0x30>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
sata: sata@fc600000 {
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 856b423..7853c2c 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -252,6 +252,10 @@
};
};
+&cmt0 {
+ status = "ok";
+};
+
&mmcif1 {
pinctrl-0 = <&mmc1_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d9ddecb..aa146d2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -206,6 +206,38 @@
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7790", "renesas,irqc";
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 23486c0..740308e 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -275,11 +275,6 @@
renesas,function = "msiof0";
};
- i2c6_pins: i2c6 {
- renesas,groups = "i2c6";
- renesas,function = "i2c6";
- };
-
usb0_pins: usb0 {
renesas,groups = "usb0";
renesas,function = "usb0";
@@ -307,6 +302,10 @@
};
};
+&cmt0 {
+ status = "ok";
+};
+
&sata0 {
status = "okay";
};
@@ -420,8 +419,6 @@
};
&i2c6 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 0d82a4b..e270f38 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -189,6 +189,38 @@
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7791", "renesas,irqc";
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 042f821d..c9d912d 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -149,6 +149,8 @@
&mmc0 { /* sdmmc */
num-slots = <1>;
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
slot@0 {
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 171b610..5e4e3c23 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -179,6 +179,8 @@
&mmc0 {
num-slots = <1>;
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
slot@0 {
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
index 249f65be2..f863a10 100644
--- a/arch/arm/boot/dts/sh7372.dtsi
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -21,6 +21,7 @@
compatible = "arm,cortex-a8";
device_type = "cpu";
reg = <0x0>;
+ clock-frequency = <800000000>;
};
};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 18662ae..99659db 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -173,6 +173,10 @@
};
};
+&cmt1 {
+ status = "ok";
+};
+
&i2c0 {
status = "okay";
as3711@40 {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 910b790..d7f52cf 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -23,11 +23,13 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <1196000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <1196000000>;
};
};
@@ -45,6 +47,16 @@
<0 56 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmt1: timer@e6138000 {
+ compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
+ reg = <0xe6138000 0x200>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+
+ renesas,channels-mask = <0x3f>;
+
+ status = "disabled";
+ };
+
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 44b07e5..e06fbfc 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -660,6 +660,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 0>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
@@ -670,6 +672,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 1>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
@@ -680,6 +684,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 2>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c3: i2c@01c2b800 {
@@ -690,6 +696,8 @@
clock-frequency = <100000>;
resets = <&apb2_rst 3>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
gmac: ethernet@01c30000 {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 8adaa78..a5446cb 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -423,7 +423,7 @@
vcc4-supply = <&sys_3v3_reg>;
vcc5-supply = <&sys_3v3_reg>;
vcc6-supply = <&vio_reg>;
- vcc7-supply = <&sys_5v0_reg>;
+ vcc7-supply = <&charge_pump_5v0_reg>;
vccio-supply = <&sys_3v3_reg>;
regulators {
@@ -674,5 +674,14 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ charge_pump_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index bf16f8e..c4ed1be 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -201,7 +201,7 @@
vcc4-supply = <&sys_3v3_reg>;
vcc5-supply = <&sys_3v3_reg>;
vcc6-supply = <&vio_reg>;
- vcc7-supply = <&sys_5v0_reg>;
+ vcc7-supply = <&charge_pump_5v0_reg>;
vccio-supply = <&sys_3v3_reg>;
regulators {
@@ -373,5 +373,14 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ charge_pump_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 2e3bd31..55eb35f 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -83,10 +83,6 @@
regulator-always-on;
};
- clk32kg: regulator-clk32kg {
- compatible = "ti,twl6030-clk32kg";
- };
-
twl_usb_comparator: usb-comparator {
compatible = "ti,twl6030-usb";
interrupts = <4>, <10>;
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 11d7334..e4bffba 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -76,7 +76,6 @@
simple-audio-card,cpu {
sound-dai = <&sai2>;
- master-clkdir-out;
frame-master;
bitclock-master;
};
@@ -168,7 +167,7 @@
};
pinctrl_esdhc1: esdhc1grp {
- fsl,fsl,pins = <
+ fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 0facf9d..fc105c9 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -68,8 +68,8 @@
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CLPS711X=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -77,6 +77,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_CLPS711X=y
CONFIG_EXT2_FS=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
diff --git a/arch/arm/configs/hi3xxx_defconfig b/arch/arm/configs/hisi_defconfig
similarity index 77%
rename from arch/arm/configs/hi3xxx_defconfig
rename to arch/arm/configs/hisi_defconfig
index 9630687..1772505 100644
--- a/arch/arm/configs/hi3xxx_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -6,10 +6,15 @@
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HIP04=y
CONFIG_SMP=y
+CONFIG_NR_CPUS=16
CONFIG_PREEMPT=y
CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
@@ -21,6 +26,12 @@
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
@@ -56,3 +67,5 @@
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 63bde0e..e688741 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -21,8 +21,6 @@
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
@@ -30,10 +28,6 @@
CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_IMX25_DT=y
CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_PCM038=y
-CONFIG_MACH_CPUIMX27=y
-CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
-CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
@@ -43,8 +37,6 @@
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -63,6 +55,7 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_IMX_WEIM=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
@@ -78,8 +71,8 @@
CONFIG_MTD_UBI=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
-CONFIG_ATA=y
CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
CONFIG_CS89x0=y
@@ -102,10 +95,8 @@
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
-CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
@@ -132,10 +123,7 @@
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_FB=y
CONFIG_FB_IMX=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 16cfec4..8fca6e2 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,8 +32,8 @@
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
-CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX50=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
@@ -105,7 +105,6 @@
CONFIG_EEPROM_AT25=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
@@ -153,14 +152,12 @@
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MXC_RNGA=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
-CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
@@ -198,7 +195,6 @@
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -206,6 +202,7 @@
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_IMX_SOC=y
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
@@ -213,6 +210,7 @@
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
@@ -240,6 +238,7 @@
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
@@ -254,7 +253,6 @@
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
-CONFIG_DRM_IMX_IPUV3_CORE=y
CONFIG_DRM_IMX_IPUV3=y
CONFIG_DRM_IMX_HDMI=y
# CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5fb95fb..691117b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -28,6 +28,7 @@
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HIP04=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX51=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index fd43f7f..79ecb4f 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -472,7 +472,6 @@
"mcr p15, 0, r0, c1, c0, 0 @ set SCTLR \n\t" \
"isb \n\t" \
"bl v7_flush_dcache_"__stringify(level)" \n\t" \
- "clrex \n\t" \
"mrc p15, 0, r0, c1, c0, 1 @ get ACTLR \n\t" \
"bic r0, r0, #(1 << 6) @ disable local coherency \n\t" \
"mcr p15, 0, r0, c1, c0, 1 @ set ACTLR \n\t" \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 963a251..819777d 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -74,6 +74,7 @@
#define ARM_CPU_PART_CORTEX_A12 0x4100c0d0
#define ARM_CPU_PART_CORTEX_A17 0x4100c0e0
#define ARM_CPU_PART_CORTEX_A15 0x4100c0f0
+#define ARM_CPU_PART_MASK 0xff00fff0
#define ARM_CPU_XSCALE_ARCH_MASK 0xe000
#define ARM_CPU_XSCALE_ARCH_V1 0x2000
@@ -179,7 +180,7 @@
*/
static inline unsigned int __attribute_const__ read_cpuid_part(void)
{
- return read_cpuid_id() & 0xff00fff0;
+ return read_cpuid_id() & ARM_CPU_PART_MASK;
}
static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void)
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index f4b46d3..afb9caf 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
+#define R_ARM_TARGET1 38
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_MOVW_ABS_NC 43
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index 57ff7f2..d428e38 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -20,7 +20,12 @@
* to consider dynamic allocation.
*/
#define MAX_CPUS_PER_CLUSTER 4
+
+#ifdef CONFIG_MCPM_QUAD_CLUSTER
+#define MAX_NR_CLUSTERS 4
+#else
#define MAX_NR_CLUSTERS 2
+#endif
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index a252c0b..0ad7d49 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -8,6 +8,7 @@
#include <linux/cpumask.h>
#include <linux/err.h>
+#include <asm/cpu.h>
#include <asm/cputype.h>
/*
@@ -25,6 +26,20 @@
#endif
}
+/**
+ * smp_cpuid_part() - return part id for a given cpu
+ * @cpu: logical cpu id.
+ *
+ * Return: part id of logical cpu passed as argument.
+ */
+static inline unsigned int smp_cpuid_part(int cpu)
+{
+ struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu);
+
+ return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK :
+ read_cpuid_part();
+}
+
/* all SMP configurations have the extended CPUID registers */
#ifndef CONFIG_MMU
#define tlb_ops_need_broadcast() 0
diff --git a/arch/arm/include/debug/meson.S b/arch/arm/include/debug/meson.S
new file mode 100644
index 0000000..1bae99b
--- /dev/null
+++ b/arch/arm/include/debug/meson.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Carlo Caione
+ * Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define MESON_AO_UART_WFIFO 0x0
+#define MESON_AO_UART_STATUS 0xc
+
+#define MESON_AO_UART_TX_FIFO_EMPTY (1 << 22)
+#define MESON_AO_UART_TX_FIFO_FULL (1 << 21)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =(CONFIG_DEBUG_UART_PHYS) @ physical
+ ldr \rv, =(CONFIG_DEBUG_UART_VIRT) @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #MESON_AO_UART_WFIFO]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
+ tst \rd, #MESON_AO_UART_TX_FIFO_EMPTY
+ beq 1002b
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
+ tst \rd, #MESON_AO_UART_TX_FIFO_FULL
+ bne 1001b
+ .endm
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 8db307d..2fdf867 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -208,26 +208,21 @@
#endif
.endif
msr spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
- ldr r0, [sp]
- strex r1, r2, [sp] @ clear the exclusive monitor
- ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
-#else
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ sub r0, sp, #4 @ uninhabited address
+ strex r1, r2, [r0] @ clear the exclusive monitor
#endif
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
strex r1, r2, [sp] @ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
@@ -261,7 +256,10 @@
.endif
ldr lr, [sp, #S_SP] @ top of the stack
ldrd r0, r1, [sp, #S_LR] @ calling lr and pc
- clrex @ clear the exclusive monitor
+
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor
+
stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context
ldmia sp, {r0 - r12}
mov sp, lr
@@ -282,13 +280,16 @@
.endm
#else /* ifdef CONFIG_CPU_V7M */
.macro restore_user_regs, fast = 0, offset = 0
- clrex @ clear the exclusive monitor
mov r2, sp
load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC] @ get pc
add sp, sp, #\offset + S_SP
msr spsr_cxsf, r1 @ save in spsr_svc
+
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r1, r2, [sp] @ clear the exclusive monitor
+
.if \fast
ldmdb sp, {r1 - r12} @ get calling r1 - r12
.else
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 45e4781..6a4dffe 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -91,6 +91,7 @@
break;
case R_ARM_ABS32:
+ case R_ARM_TARGET1:
*(u32 *)loc += sym->st_value;
break;
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 67c492a..b19a396 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -36,5 +36,4 @@
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
obj-y += brcmstb.o
-obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o
endif
diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h
deleted file mode 100644
index ec0c3d1..0000000
--- a/arch/arm/mach-bcm/brcmstb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BRCMSTB_H__
-#define __BRCMSTB_H__
-
-void brcmstb_secondary_startup(void);
-
-#endif /* __BRCMSTB_H__ */
diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S
deleted file mode 100644
index 199c1ea..0000000
--- a/arch/arm/mach-bcm/headsmp-brcmstb.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * SMP boot code for secondary CPUs
- * Based on arch/arm/mach-tegra/headsmp.S
- *
- * Copyright (C) 2010 NVIDIA, Inc.
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/assembler.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- .section ".text.head", "ax"
-
-ENTRY(brcmstb_secondary_startup)
- /*
- * Ensure CPU is in a sane state by disabling all IRQs and switching
- * into SVC mode.
- */
- setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
-
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(brcmstb_secondary_startup)
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
deleted file mode 100644
index af780e9..0000000
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Broadcom STB CPU SMP and hotplug support for ARM
- *
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/printk.h>
-#include <linux/regmap.h>
-#include <linux/smp.h>
-#include <linux/mfd/syscon.h>
-#include <linux/spinlock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "brcmstb.h"
-
-enum {
- ZONE_MAN_CLKEN_MASK = BIT(0),
- ZONE_MAN_RESET_CNTL_MASK = BIT(1),
- ZONE_MAN_MEM_PWR_MASK = BIT(4),
- ZONE_RESERVED_1_MASK = BIT(5),
- ZONE_MAN_ISO_CNTL_MASK = BIT(6),
- ZONE_MANUAL_CONTROL_MASK = BIT(7),
- ZONE_PWR_DN_REQ_MASK = BIT(9),
- ZONE_PWR_UP_REQ_MASK = BIT(10),
- ZONE_BLK_RST_ASSERT_MASK = BIT(12),
- ZONE_PWR_OFF_STATE_MASK = BIT(25),
- ZONE_PWR_ON_STATE_MASK = BIT(26),
- ZONE_DPG_PWR_STATE_MASK = BIT(28),
- ZONE_MEM_PWR_STATE_MASK = BIT(29),
- ZONE_RESET_STATE_MASK = BIT(31),
- CPU0_PWR_ZONE_CTRL_REG = 1,
- CPU_RESET_CONFIG_REG = 2,
-};
-
-static void __iomem *cpubiuctrl_block;
-static void __iomem *hif_cont_block;
-static u32 cpu0_pwr_zone_ctrl_reg;
-static u32 cpu_rst_cfg_reg;
-static u32 hif_cont_reg;
-
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
-
-static int per_cpu_sw_state_rd(u32 cpu)
-{
- sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
- return per_cpu(per_cpu_sw_state, cpu);
-}
-
-static void per_cpu_sw_state_wr(u32 cpu, int val)
-{
- per_cpu(per_cpu_sw_state, cpu) = val;
- dmb();
- sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
- dsb_sev();
-}
-#else
-static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
-#endif
-
-static void __iomem *pwr_ctrl_get_base(u32 cpu)
-{
- void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
- base += (cpu_logical_map(cpu) * 4);
- return base;
-}
-
-static u32 pwr_ctrl_rd(u32 cpu)
-{
- void __iomem *base = pwr_ctrl_get_base(cpu);
- return readl_relaxed(base);
-}
-
-static void pwr_ctrl_wr(u32 cpu, u32 val)
-{
- void __iomem *base = pwr_ctrl_get_base(cpu);
- writel(val, base);
-}
-
-static void cpu_rst_cfg_set(u32 cpu, int set)
-{
- u32 val;
- val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
- if (set)
- val |= BIT(cpu_logical_map(cpu));
- else
- val &= ~BIT(cpu_logical_map(cpu));
- writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
-}
-
-static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
-{
- const int reg_ofs = cpu_logical_map(cpu) * 8;
- writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
- writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
-}
-
-static void brcmstb_cpu_boot(u32 cpu)
-{
- pr_info("SMP: Booting CPU%d...\n", cpu);
-
- /*
- * set the reset vector to point to the secondary_startup
- * routine
- */
- cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
-
- /* unhalt the cpu */
- cpu_rst_cfg_set(cpu, 0);
-}
-
-static void brcmstb_cpu_power_on(u32 cpu)
-{
- /*
- * The secondary cores power was cut, so we must go through
- * power-on initialization.
- */
- u32 tmp;
-
- pr_info("SMP: Powering up CPU%d...\n", cpu);
-
- /* Request zone power up */
- pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
-
- /* Wait for the power up FSM to complete */
- do {
- tmp = pwr_ctrl_rd(cpu);
- } while (!(tmp & ZONE_PWR_ON_STATE_MASK));
-
- per_cpu_sw_state_wr(cpu, 1);
-}
-
-static int brcmstb_cpu_get_power_state(u32 cpu)
-{
- int tmp = pwr_ctrl_rd(cpu);
- return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void brcmstb_cpu_die(u32 cpu)
-{
- v7_exit_coherency_flush(all);
-
- /* Prevent all interrupts from reaching this CPU. */
- arch_local_irq_disable();
-
- /*
- * Final full barrier to ensure everything before this instruction has
- * quiesced.
- */
- isb();
- dsb();
-
- per_cpu_sw_state_wr(cpu, 0);
-
- /* Sit and wait to die */
- wfi();
-
- /* We should never get here... */
- panic("Spurious interrupt on CPU %d received!\n", cpu);
-}
-
-static int brcmstb_cpu_kill(u32 cpu)
-{
- u32 tmp;
-
- pr_info("SMP: Powering down CPU%d...\n", cpu);
-
- while (per_cpu_sw_state_rd(cpu))
- ;
-
- /* Program zone reset */
- pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
- ZONE_PWR_DN_REQ_MASK);
-
- /* Verify zone reset */
- tmp = pwr_ctrl_rd(cpu);
- if (!(tmp & ZONE_RESET_STATE_MASK))
- pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
- __func__, cpu);
-
- /* Wait for power down */
- do {
- tmp = pwr_ctrl_rd(cpu);
- } while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
-
- /* Settle-time from Broadcom-internal DVT reference code */
- udelay(7);
-
- /* Assert reset on the CPU */
- cpu_rst_cfg_set(cpu, 1);
-
- return 1;
-}
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
-static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
-{
- int rc = 0;
- char *name;
- struct device_node *syscon_np = NULL;
-
- name = "syscon-cpu";
-
- syscon_np = of_parse_phandle(np, name, 0);
- if (!syscon_np) {
- pr_err("can't find phandle %s\n", name);
- rc = -EINVAL;
- goto cleanup;
- }
-
- cpubiuctrl_block = of_iomap(syscon_np, 0);
- if (!cpubiuctrl_block) {
- pr_err("iomap failed for cpubiuctrl_block\n");
- rc = -EINVAL;
- goto cleanup;
- }
-
- rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
- &cpu0_pwr_zone_ctrl_reg);
- if (rc) {
- pr_err("failed to read 1st entry from %s property (%d)\n", name,
- rc);
- rc = -EINVAL;
- goto cleanup;
- }
-
- rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
- &cpu_rst_cfg_reg);
- if (rc) {
- pr_err("failed to read 2nd entry from %s property (%d)\n", name,
- rc);
- rc = -EINVAL;
- goto cleanup;
- }
-
-cleanup:
- if (syscon_np)
- of_node_put(syscon_np);
-
- return rc;
-}
-
-static int __init setup_hifcont_regs(struct device_node *np)
-{
- int rc = 0;
- char *name;
- struct device_node *syscon_np = NULL;
-
- name = "syscon-cont";
-
- syscon_np = of_parse_phandle(np, name, 0);
- if (!syscon_np) {
- pr_err("can't find phandle %s\n", name);
- rc = -EINVAL;
- goto cleanup;
- }
-
- hif_cont_block = of_iomap(syscon_np, 0);
- if (!hif_cont_block) {
- pr_err("iomap failed for hif_cont_block\n");
- rc = -EINVAL;
- goto cleanup;
- }
-
- /* offset is at top of hif_cont_block */
- hif_cont_reg = 0;
-
-cleanup:
- if (syscon_np)
- of_node_put(syscon_np);
-
- return rc;
-}
-
-static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
-{
- int rc;
- struct device_node *np;
- char *name;
-
- name = "brcm,brcmstb-smpboot";
- np = of_find_compatible_node(NULL, NULL, name);
- if (!np) {
- pr_err("can't find compatible node %s\n", name);
- return;
- }
-
- rc = setup_hifcpubiuctrl_regs(np);
- if (rc)
- return;
-
- rc = setup_hifcont_regs(np);
- if (rc)
- return;
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void brcmstb_secondary_init(unsigned int cpu)
-{
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /* Bring up power to the core if necessary */
- if (brcmstb_cpu_get_power_state(cpu) == 0)
- brcmstb_cpu_power_on(cpu);
-
- brcmstb_cpu_boot(cpu);
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return 0;
-}
-
-static struct smp_operations brcmstb_smp_ops __initdata = {
- .smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
- .smp_secondary_init = brcmstb_secondary_init,
- .smp_boot_secondary = brcmstb_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_kill = brcmstb_cpu_kill,
- .cpu_die = brcmstb_cpu_die,
-#endif
-};
-
-CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index fdf54d4..f339797 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -14,8 +14,9 @@
#include <linux/types.h>
#include <linux/i2c-gpio.h>
#include <linux/interrupt.h>
-#include <linux/backlight.h>
#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
#include <linux/memblock.h>
#include <linux/mtd/physmap.h>
@@ -108,23 +109,23 @@
.set_power = edb7211_lcd_power_set,
};
-static void edb7211_lcd_backlight_set_intensity(int intensity)
-{
- gpio_set_value(EDB7211_LCDBL, !!intensity);
- clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON);
-}
-
-static struct generic_bl_info edb7211_lcd_backlight_pdata = {
- .name = "lcd-backlight.0",
- .default_intensity = 0x01,
- .max_intensity = 0x0f,
- .set_bl_intensity = edb7211_lcd_backlight_set_intensity,
+static struct pwm_lookup edb7211_pwm_lookup[] = {
+ PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
+ 0, PWM_POLARITY_NORMAL),
};
+static struct platform_pwm_backlight_data pwm_bl_pdata = {
+ .dft_brightness = 0x01,
+ .max_brightness = 0x0f,
+ .enable_gpio = EDB7211_LCDBL,
+};
+
+static struct resource clps711x_pwm_res =
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
+
static struct gpio edb7211_gpios[] __initconst = {
{ EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" },
{ EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" },
- { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" },
};
/* Reserve screen memory region at the start of main system memory. */
@@ -153,12 +154,18 @@
gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
platform_device_register(&edb7211_flash_pdev);
+
platform_device_register_data(NULL, "platform-lcd", 0,
&edb7211_lcd_power_pdata,
sizeof(edb7211_lcd_power_pdata));
- platform_device_register_data(NULL, "generic-bl", 0,
- &edb7211_lcd_backlight_pdata,
- sizeof(edb7211_lcd_backlight_pdata));
+
+ platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
+ &clps711x_pwm_res, 1);
+ pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
+
+ platform_device_register_data(&platform_bus, "pwm-backlight", 0,
+ &pwm_bl_pdata, sizeof(pwm_bl_pdata));
+
platform_device_register_simple("video-clps711x", 0, NULL, 0);
platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
ARRAY_SIZE(edb7211_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 0c689d3..77a9617 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -1,7 +1,7 @@
/*
* CLPS711X common devices definitions
*
- * Author: Alexander Shiyan <shc_work@mail.ru>, 2013
+ * Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -9,8 +9,15 @@
* (at your option) any later version.
*/
+#include <linux/io.h>
+#include <linux/of_fdt.h>
#include <linux/platform_device.h>
+#include <linux/random.h>
#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include <asm/system_info.h>
#include <mach/hardware.h>
@@ -90,10 +97,53 @@
ARRAY_SIZE(clps711x_uart2_res));
};
+static void __init clps711x_soc_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ void __iomem *base;
+ u32 id[5];
+
+ base = ioremap(CLPS711X_PHYS_BASE, SZ_32K);
+ if (!base)
+ return;
+
+ id[0] = readl(base + UNIQID);
+ id[1] = readl(base + RANDID0);
+ id[2] = readl(base + RANDID1);
+ id[3] = readl(base + RANDID2);
+ id[4] = readl(base + RANDID3);
+ system_rev = SYSFLG1_VERID(readl(base + SYSFLG1));
+
+ add_device_randomness(id, sizeof(id));
+
+ system_serial_low = id[0];
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ goto out_unmap;
+
+ soc_dev_attr->machine = of_flat_dt_get_machine_name();
+ soc_dev_attr->family = "Cirrus Logic CLPS711X";
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr);
+ }
+
+out_unmap:
+ iounmap(base);
+}
+
void __init clps711x_devices_init(void)
{
clps711x_add_cpuidle();
clps711x_add_gpio();
clps711x_add_syscon();
clps711x_add_uart();
+ clps711x_soc_init();
}
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index b2f8b60..dc9a764 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -43,7 +43,6 @@
"mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \
"isb\n\t"\
"bl v7_flush_dcache_"__stringify(level)"\n\t" \
- "clrex\n\t"\
"mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \
"bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \
/* Dummy Load of a device register to avoid Erratum 799270 */ \
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 9848829..075772b 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -22,6 +22,15 @@
help
Support for Hisilicon Hi36xx SoC family
+config ARCH_HIP04
+ bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
+ select ARM_ERRATA_798181 if SMP
+ select HAVE_ARM_ARCH_TIMER
+ select MCPM if SMP
+ select MCPM_QUAD_CLUSTER if SMP
+ help
+ Support for Hisilicon HiP04 SoC family
+
config ARCH_HIX5HD2
bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7
select CACHE_L2X0
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile
index ee2506b..6b7b303 100644
--- a/arch/arm/mach-hisi/Makefile
+++ b/arch/arm/mach-hisi/Makefile
@@ -2,5 +2,8 @@
# Makefile for Hisilicon processors family
#
+CFLAGS_platmcpm.o := -march=armv7-a
+
obj-y += hisilicon.o
+obj-$(CONFIG_MCPM) += platmcpm.o
obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index 7cda6dd..7744c35 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -63,3 +63,12 @@
DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)")
.dt_compat = hix5hd2_compat,
MACHINE_END
+
+static const char *hip04_compat[] __initconst = {
+ "hisilicon,hip04-d01",
+ NULL,
+};
+
+DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
+ .dt_compat = hip04_compat,
+MACHINE_END
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
new file mode 100644
index 0000000..280f3f1
--- /dev/null
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -0,0 +1,386 @@
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/of_address.h>
+
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+#include <asm/mcpm.h>
+
+#include "core.h"
+
+/* bits definition in SC_CPU_RESET_REQ[x]/SC_CPU_RESET_DREQ[x]
+ * 1 -- unreset; 0 -- reset
+ */
+#define CORE_RESET_BIT(x) (1 << x)
+#define NEON_RESET_BIT(x) (1 << (x + 4))
+#define CORE_DEBUG_RESET_BIT(x) (1 << (x + 9))
+#define CLUSTER_L2_RESET_BIT (1 << 8)
+#define CLUSTER_DEBUG_RESET_BIT (1 << 13)
+
+/*
+ * bits definition in SC_CPU_RESET_STATUS[x]
+ * 1 -- reset status; 0 -- unreset status
+ */
+#define CORE_RESET_STATUS(x) (1 << x)
+#define NEON_RESET_STATUS(x) (1 << (x + 4))
+#define CORE_DEBUG_RESET_STATUS(x) (1 << (x + 9))
+#define CLUSTER_L2_RESET_STATUS (1 << 8)
+#define CLUSTER_DEBUG_RESET_STATUS (1 << 13)
+#define CORE_WFI_STATUS(x) (1 << (x + 16))
+#define CORE_WFE_STATUS(x) (1 << (x + 20))
+#define CORE_DEBUG_ACK(x) (1 << (x + 24))
+
+#define SC_CPU_RESET_REQ(x) (0x520 + (x << 3)) /* reset */
+#define SC_CPU_RESET_DREQ(x) (0x524 + (x << 3)) /* unreset */
+#define SC_CPU_RESET_STATUS(x) (0x1520 + (x << 3))
+
+#define FAB_SF_MODE 0x0c
+#define FAB_SF_INVLD 0x10
+
+/* bits definition in FB_SF_INVLD */
+#define FB_SF_INVLD_START (1 << 8)
+
+#define HIP04_MAX_CLUSTERS 4
+#define HIP04_MAX_CPUS_PER_CLUSTER 4
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static void __iomem *sysctrl, *fabric;
+static int hip04_cpu_table[HIP04_MAX_CLUSTERS][HIP04_MAX_CPUS_PER_CLUSTER];
+static DEFINE_SPINLOCK(boot_lock);
+static u32 fabric_phys_addr;
+/*
+ * [0]: bootwrapper physical address
+ * [1]: bootwrapper size
+ * [2]: relocation address
+ * [3]: relocation size
+ */
+static u32 hip04_boot_method[4];
+
+static bool hip04_cluster_is_down(unsigned int cluster)
+{
+ int i;
+
+ for (i = 0; i < HIP04_MAX_CPUS_PER_CLUSTER; i++)
+ if (hip04_cpu_table[cluster][i])
+ return false;
+ return true;
+}
+
+static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on)
+{
+ unsigned long data;
+
+ if (!fabric)
+ BUG();
+ data = readl_relaxed(fabric + FAB_SF_MODE);
+ if (on)
+ data |= 1 << cluster;
+ else
+ data &= ~(1 << cluster);
+ writel_relaxed(data, fabric + FAB_SF_MODE);
+ do {
+ cpu_relax();
+ } while (data != readl_relaxed(fabric + FAB_SF_MODE));
+}
+
+static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
+{
+ unsigned long data;
+ void __iomem *sys_dreq, *sys_status;
+
+ if (!sysctrl)
+ return -ENODEV;
+ if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER)
+ return -EINVAL;
+
+ spin_lock_irq(&boot_lock);
+
+ if (hip04_cpu_table[cluster][cpu])
+ goto out;
+
+ sys_dreq = sysctrl + SC_CPU_RESET_DREQ(cluster);
+ sys_status = sysctrl + SC_CPU_RESET_STATUS(cluster);
+ if (hip04_cluster_is_down(cluster)) {
+ data = CLUSTER_DEBUG_RESET_BIT;
+ writel_relaxed(data, sys_dreq);
+ do {
+ cpu_relax();
+ data = readl_relaxed(sys_status);
+ } while (data & CLUSTER_DEBUG_RESET_STATUS);
+ }
+
+ data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \
+ CORE_DEBUG_RESET_BIT(cpu);
+ writel_relaxed(data, sys_dreq);
+ do {
+ cpu_relax();
+ } while (data == readl_relaxed(sys_status));
+ /*
+ * We may fail to power up core again without this delay.
+ * It's not mentioned in document. It's found by test.
+ */
+ udelay(20);
+out:
+ hip04_cpu_table[cluster][cpu]++;
+ spin_unlock_irq(&boot_lock);
+
+ return 0;
+}
+
+static void hip04_mcpm_power_down(void)
+{
+ unsigned int mpidr, cpu, cluster;
+ bool skip_wfi = false, last_man = false;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ __mcpm_cpu_going_down(cpu, cluster);
+
+ spin_lock(&boot_lock);
+ BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+ hip04_cpu_table[cluster][cpu]--;
+ if (hip04_cpu_table[cluster][cpu] == 1) {
+ /* A power_up request went ahead of us. */
+ skip_wfi = true;
+ } else if (hip04_cpu_table[cluster][cpu] > 1) {
+ pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu);
+ BUG();
+ }
+
+ last_man = hip04_cluster_is_down(cluster);
+ if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+ spin_unlock(&boot_lock);
+ /* Since it's Cortex A15, disable L2 prefetching. */
+ asm volatile(
+ "mcr p15, 1, %0, c15, c0, 3 \n\t"
+ "isb \n\t"
+ "dsb "
+ : : "r" (0x400) );
+ v7_exit_coherency_flush(all);
+ hip04_set_snoop_filter(cluster, 0);
+ __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+ } else {
+ spin_unlock(&boot_lock);
+ v7_exit_coherency_flush(louis);
+ }
+
+ __mcpm_cpu_down(cpu, cluster);
+
+ if (!skip_wfi)
+ wfi();
+}
+
+static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
+{
+ unsigned int data, tries, count;
+ int ret = -ETIMEDOUT;
+
+ BUG_ON(cluster >= HIP04_MAX_CLUSTERS ||
+ cpu >= HIP04_MAX_CPUS_PER_CLUSTER);
+
+ count = TIMEOUT_MSEC / POLL_MSEC;
+ spin_lock_irq(&boot_lock);
+ for (tries = 0; tries < count; tries++) {
+ if (hip04_cpu_table[cluster][cpu]) {
+ ret = -EBUSY;
+ goto err;
+ }
+ cpu_relax();
+ data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster));
+ if (data & CORE_WFI_STATUS(cpu))
+ break;
+ spin_unlock_irq(&boot_lock);
+ /* Wait for clean L2 when the whole cluster is down. */
+ msleep(POLL_MSEC);
+ spin_lock_irq(&boot_lock);
+ }
+ if (tries >= count)
+ goto err;
+ data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \
+ CORE_DEBUG_RESET_BIT(cpu);
+ writel_relaxed(data, sysctrl + SC_CPU_RESET_REQ(cluster));
+ for (tries = 0; tries < count; tries++) {
+ cpu_relax();
+ data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster));
+ if (data & CORE_RESET_STATUS(cpu))
+ break;
+ }
+ if (tries >= count)
+ goto err;
+ spin_unlock_irq(&boot_lock);
+ return 0;
+err:
+ spin_unlock_irq(&boot_lock);
+ return ret;
+}
+
+static void hip04_mcpm_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ spin_lock(&boot_lock);
+ if (!hip04_cpu_table[cluster][cpu])
+ hip04_cpu_table[cluster][cpu] = 1;
+ spin_unlock(&boot_lock);
+}
+
+static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level)
+{
+ asm volatile (" \n"
+" cmp r0, #0 \n"
+" bxeq lr \n"
+ /* calculate fabric phys address */
+" adr r2, 2f \n"
+" ldmia r2, {r1, r3} \n"
+" sub r0, r2, r1 \n"
+" ldr r2, [r0, r3] \n"
+ /* get cluster id from MPIDR */
+" mrc p15, 0, r0, c0, c0, 5 \n"
+" ubfx r1, r0, #8, #8 \n"
+ /* 1 << cluster id */
+" mov r0, #1 \n"
+" mov r3, r0, lsl r1 \n"
+" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n"
+" tst r0, r3 \n"
+" bxne lr \n"
+" orr r1, r0, r3 \n"
+" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n"
+"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n"
+" tst r0, r3 \n"
+" beq 1b \n"
+" bx lr \n"
+
+" .align 2 \n"
+"2: .word . \n"
+" .word fabric_phys_addr \n"
+ );
+}
+
+static const struct mcpm_platform_ops hip04_mcpm_ops = {
+ .power_up = hip04_mcpm_power_up,
+ .power_down = hip04_mcpm_power_down,
+ .wait_for_powerdown = hip04_mcpm_wait_for_powerdown,
+ .powered_up = hip04_mcpm_powered_up,
+};
+
+static bool __init hip04_cpu_table_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ if (cluster >= HIP04_MAX_CLUSTERS ||
+ cpu >= HIP04_MAX_CPUS_PER_CLUSTER) {
+ pr_err("%s: boot CPU is out of bound!\n", __func__);
+ return false;
+ }
+ hip04_set_snoop_filter(cluster, 1);
+ hip04_cpu_table[cluster][cpu] = 1;
+ return true;
+}
+
+static int __init hip04_mcpm_init(void)
+{
+ struct device_node *np, *np_sctl, *np_fab;
+ struct resource fab_res;
+ void __iomem *relocation;
+ int ret = -ENODEV;
+
+ np = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-bootwrapper");
+ if (!np)
+ goto err;
+ ret = of_property_read_u32_array(np, "boot-method",
+ &hip04_boot_method[0], 4);
+ if (ret)
+ goto err;
+ np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
+ if (!np_sctl)
+ goto err;
+ np_fab = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-fabric");
+ if (!np_fab)
+ goto err;
+
+ ret = memblock_reserve(hip04_boot_method[0], hip04_boot_method[1]);
+ if (ret)
+ goto err;
+
+ relocation = ioremap(hip04_boot_method[2], hip04_boot_method[3]);
+ if (!relocation) {
+ pr_err("failed to map relocation space\n");
+ ret = -ENOMEM;
+ goto err_reloc;
+ }
+ sysctrl = of_iomap(np_sctl, 0);
+ if (!sysctrl) {
+ pr_err("failed to get sysctrl base\n");
+ ret = -ENOMEM;
+ goto err_sysctrl;
+ }
+ ret = of_address_to_resource(np_fab, 0, &fab_res);
+ if (ret) {
+ pr_err("failed to get fabric base phys\n");
+ goto err_fabric;
+ }
+ fabric_phys_addr = fab_res.start;
+ sync_cache_w(&fabric_phys_addr);
+ fabric = of_iomap(np_fab, 0);
+ if (!fabric) {
+ pr_err("failed to get fabric base\n");
+ ret = -ENOMEM;
+ goto err_fabric;
+ }
+
+ if (!hip04_cpu_table_init()) {
+ ret = -EINVAL;
+ goto err_table;
+ }
+ ret = mcpm_platform_register(&hip04_mcpm_ops);
+ if (ret) {
+ goto err_table;
+ }
+
+ /*
+ * Fill the instruction address that is used after secondary core
+ * out of reset.
+ */
+ writel_relaxed(hip04_boot_method[0], relocation);
+ writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */
+ writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8);
+ writel_relaxed(0, relocation + 12);
+ iounmap(relocation);
+
+ mcpm_sync_init(hip04_mcpm_power_up_setup);
+ mcpm_smp_set_ops();
+ pr_info("HiP04 MCPM initialized\n");
+ return ret;
+err_table:
+ iounmap(fabric);
+err_fabric:
+ iounmap(sysctrl);
+err_sysctrl:
+ iounmap(relocation);
+err_reloc:
+ memblock_free(hip04_boot_method[0], hip04_boot_method[1]);
+err:
+ return ret;
+}
+early_initcall(hip04_mcpm_init);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9de84a2..11b2957 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -69,6 +69,7 @@
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
+ select PINCTRL_IMX1
config SOC_IMX21
bool
@@ -85,7 +86,6 @@
config SOC_IMX27
bool
- select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -109,17 +109,6 @@
if ARCH_MULTI_V4T
comment "MX1 platforms:"
-config MACH_MXLADS
- bool
-
-config ARCH_MX1ADS
- bool "MX1ADS platform"
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select MACH_MXLADS
- select SOC_IMX1
- help
- Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
@@ -136,6 +125,13 @@
help
Say Yes here if you are using the Armadeus APF9328 development board
+config MACH_IMX1_DT
+ bool "Support i.MX1 platforms from device tree"
+ select SOC_IMX1
+ help
+ Include support for Freescale i.MX1 based platforms
+ using the device tree for discovery.
+
endif
if ARCH_MULTI_V5
@@ -224,86 +220,6 @@
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
-config MACH_PCM038
- bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select IMX_HAVE_PLATFORM_SPI_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for phyCORE-i.MX27 (aka pcm038) platform. This
- includes specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_PCM038
- default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
- bool "PHYTEC PCM970 development board"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_MXC_MMC
- help
- This adds board specific devices that can be found on Phytec's
- PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
- bool "Eukrea CPUIMX27 module"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX27
- help
- Include support for Eukrea CPUIMX27 platform. This includes
- specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
- bool "CPUIMX27 integrates SDHC2 module"
- depends on MACH_CPUIMX27
- select IMX_HAVE_PLATFORM_MXC_MMC
- help
- This adds support for the internal SDHC2 used on CPUIMX27
- for wifi or eMMC.
-
-config MACH_EUKREA_CPUIMX27_USEUART4
- bool "CPUIMX27 integrates UART4 module"
- depends on MACH_CPUIMX27
- help
- This adds support for the internal UART4 used on CPUIMX27
- for bluetooth.
-
-choice
- prompt "Baseboard"
- depends on MACH_CPUIMX27
- default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
- bool "Eukrea MBIMX27 development board"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMX27 evaluation board.
-
-endchoice
-
config MACH_MX27_3DS
bool "MX27PDK platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -360,18 +276,6 @@
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
-config MACH_MXT_TD60
- bool "Maxtrack i-MXT TD60"
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select SOC_IMX27
- help
- Include support for i-MXT (aka td60) platform. This
- includes specific configurations for the module and its peripherals.
-
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
@@ -659,7 +563,6 @@
config SOC_IMX5
bool
- select ARCH_HAS_OPP
select HAVE_IMX_SRC
select MXC_TZIC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ac88599..6e4fcd8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -16,7 +16,8 @@
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o \
- clk-fixup-div.o clk-fixup-mux.o
+ clk-fixup-div.o clk-fixup-mux.o \
+ clk-gate-exclusive.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
@@ -41,9 +42,9 @@
endif
# i.MX1 based machines
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
+obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
@@ -56,14 +57,9 @@
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
@@ -93,9 +89,11 @@
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+ifdef CONFIG_SOC_IMX6
AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 4a40bbb4..8259a62 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -104,6 +104,19 @@
case 2:
revision = IMX_CHIP_REVISION_1_2;
break;
+ case 3:
+ revision = IMX_CHIP_REVISION_1_3;
+ break;
+ case 4:
+ revision = IMX_CHIP_REVISION_1_4;
+ break;
+ case 5:
+ /*
+ * i.MX6DQ TO1.5 is defined as Rev 1.3 in Data Sheet, marked
+ * as 'D' in Part Number last character.
+ */
+ revision = IMX_CHIP_REVISION_1_5;
+ break;
default:
revision = IMX_CHIP_REVISION_UNKNOWN;
}
diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h
deleted file mode 100644
index 6f371e3..0000000
--- a/arch/arm/mach-imx/board-pcm038.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
-#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside pcm038_init().
- *
- * This example here is for the development board. Refer pcm970-baseboard.c
- */
-
-extern void pcm970_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/arch/arm/mach-imx/clk-gate-exclusive.c b/arch/arm/mach-imx/clk-gate-exclusive.c
new file mode 100644
index 0000000..c12f5f2
--- /dev/null
+++ b/arch/arm/mach-imx/clk-gate-exclusive.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_gate_exclusive - i.MX specific gate clock which is mutually
+ * exclusive with other gate clocks
+ *
+ * @gate: the parent class
+ * @exclusive_mask: mask of gate bits which are mutually exclusive to this
+ * gate clock
+ *
+ * The imx exclusive gate clock is a subclass of basic clk_gate
+ * with an addtional mask to indicate which other gate bits in the same
+ * register is mutually exclusive to this gate clock.
+ */
+struct clk_gate_exclusive {
+ struct clk_gate gate;
+ u32 exclusive_mask;
+};
+
+static int clk_gate_exclusive_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = container_of(hw, struct clk_gate, hw);
+ struct clk_gate_exclusive *exgate = container_of(gate,
+ struct clk_gate_exclusive, gate);
+ u32 val = readl(gate->reg);
+
+ if (val & exgate->exclusive_mask)
+ return -EBUSY;
+
+ return clk_gate_ops.enable(hw);
+}
+
+static void clk_gate_exclusive_disable(struct clk_hw *hw)
+{
+ clk_gate_ops.disable(hw);
+}
+
+static int clk_gate_exclusive_is_enabled(struct clk_hw *hw)
+{
+ return clk_gate_ops.is_enabled(hw);
+}
+
+static const struct clk_ops clk_gate_exclusive_ops = {
+ .enable = clk_gate_exclusive_enable,
+ .disable = clk_gate_exclusive_disable,
+ .is_enabled = clk_gate_exclusive_is_enabled,
+};
+
+struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u32 exclusive_mask)
+{
+ struct clk_gate_exclusive *exgate;
+ struct clk_gate *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ if (exclusive_mask == 0)
+ return ERR_PTR(-EINVAL);
+
+ exgate = kzalloc(sizeof(*exgate), GFP_KERNEL);
+ if (!exgate)
+ return ERR_PTR(-ENOMEM);
+ gate = &exgate->gate;
+
+ init.name = name;
+ init.ops = &clk_gate_exclusive_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent ? &parent : NULL;
+ init.num_parents = parent ? 1 : 0;
+
+ gate->reg = reg;
+ gate->bit_idx = shift;
+ gate->lock = &imx_ccm_lock;
+ gate->hw.init = &init;
+ exgate->exclusive_mask = exclusive_mask;
+
+ clk = clk_register(NULL, &gate->hw);
+ if (IS_ERR(clk))
+ kfree(exgate);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 6cceb77..1412daf 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -64,7 +64,7 @@
"ipu2", "vdo_axi", "osc", "gpu2d_core",
"gpu3d_core", "usdhc2", "ssi1", "ssi2",
"ssi3", "gpu3d_shader", "vpu_axi", "can_root",
- "ldb_di0", "ldb_di1", "esai", "eim_slow",
+ "ldb_di0", "ldb_di1", "esai_extal", "eim_slow",
"uart_serial", "spdif", "asrc", "hsi_tx",
};
static const char *cko_sels[] = { "cko1", "cko2", };
@@ -73,6 +73,14 @@
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
"pcie_ref_125m", "sata_ref_100m",
};
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static struct clk *clk[IMX6QDL_CLK_END];
static struct clk_onecell_data clk_data;
@@ -107,6 +115,10 @@
};
static unsigned int share_count_esai;
+static unsigned int share_count_asrc;
+static unsigned int share_count_ssi1;
+static unsigned int share_count_ssi2;
+static unsigned int share_count_ssi3;
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
@@ -119,6 +131,9 @@
clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ /* Clock source from external clock via CLK1/2 PADs */
+ clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+ clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
base = of_iomap(np, 0);
@@ -132,14 +147,47 @@
video_div_table[2].div = 1;
};
- /* type name parent_name base div_mask */
- clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
- clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
- clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
- clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
- clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
- clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
- clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
+ clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ /* type name parent_name base div_mask */
+ clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+ clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+ clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+ clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+ clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+ clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+ clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+ clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]);
+ clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]);
+ clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]);
+ clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]);
+ clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]);
+ clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]);
+ clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]);
+
+ clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
+ clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
+ clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
/*
* Bit 20 is the reserved and read-only bit, we do this only for:
@@ -176,8 +224,11 @@
* the "output_enable" bit as a gate, even though it's really just
* enabling clock output.
*/
- clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
- clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+ clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12));
+ clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13));
+
+ clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
+ clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11));
/* name parent_name reg idx */
clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
@@ -194,6 +245,11 @@
clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+ if (cpu_is_imx6dl()) {
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
+ }
clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
@@ -217,8 +273,10 @@
clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ if (cpu_is_imx6q()) {
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ }
clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
@@ -311,7 +369,9 @@
/* name parent_name reg shift */
clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
- clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
+ clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc);
+ clk[IMX6QDL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
+ clk[IMX6QDL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
@@ -325,8 +385,9 @@
else
clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[IMX6QDL_CLK_ESAI] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
- clk[IMX6QDL_CLK_ESAI_AHB] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ipg", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
if (cpu_is_imx6dl())
@@ -382,9 +443,12 @@
clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
- clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clk[IMX6QDL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clk[IMX6QDL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clk[IMX6QDL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
@@ -398,6 +462,13 @@
clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+ /*
+ * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it
+ * to clock gpt_ipg_per to ease the gpt driver code.
+ */
+ if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0)
+ clk[IMX6QDL_CLK_GPT_3M] = clk[IMX6QDL_CLK_GPT_IPG_PER];
+
imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index fef46fa..e982ebe 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -43,11 +43,13 @@
static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", };
static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", };
-static const char *csi_lcdif_sels[] = { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
+static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
+static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", };
static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", };
static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
static const char *perclk_sels[] = { "ipg", "osc", };
-static const char *epdc_pxp_sels[] = { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
+static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", };
+static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", };
static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
@@ -55,6 +57,20 @@
static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
static const char *ecspi_sels[] = { "pll3_60m", "osc", };
static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *lvds_sels[] = {
+ "pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video",
+ "dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1",
+ "pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy",
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+};
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static struct clk_div_table clk_enet_ref_table[] = {
{ .val = 0, .div = 20, },
@@ -79,6 +95,10 @@
{ }
};
+static unsigned int share_count_ssi1;
+static unsigned int share_count_ssi2;
+static unsigned int share_count_ssi3;
+
static struct clk *clks[IMX6SL_CLK_END];
static struct clk_onecell_data clk_data;
static void __iomem *ccm_base;
@@ -175,20 +195,59 @@
clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ /* Clock source from external clock via CLK1 PAD */
+ clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
base = of_iomap(np, 0);
WARN_ON(!base);
anatop_base = base;
- /* type name parent base div_mask */
- clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
- clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
- clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
- clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
- clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
- clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
- clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3);
+ clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+ clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+ clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+ clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+ clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+ clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+ clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+ clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]);
+ clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]);
+ clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]);
+ clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]);
+ clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]);
+ clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]);
+ clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]);
+
+ clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
+ clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
+ clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
+
+ clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
+ clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
/*
* usbphy1 and usbphy2 are implemented as dummy gates using reserve
@@ -241,8 +300,8 @@
clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels));
- clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, csi_lcdif_sels, ARRAY_SIZE(csi_lcdif_sels));
+ clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
+ clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels));
clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
@@ -251,8 +310,8 @@
clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels));
- clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_pxp_sels, ARRAY_SIZE(epdc_pxp_sels));
+ clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels));
+ clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels));
clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels));
clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels));
clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels));
@@ -337,9 +396,12 @@
clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6);
clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14);
- clks[IMX6SL_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
- clks[IMX6SL_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
- clks[IMX6SL_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24);
clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26);
clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
@@ -375,6 +437,13 @@
/* Audio-related clocks configuration */
clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
+ /* set PLL5 video as lcdif pix parent clock */
+ clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL],
+ clks[IMX6SL_CLK_PLL5_VIDEO_DIV]);
+
+ clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
+ clks[IMX6SL_CLK_PLL2_PFD2]);
+
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
}
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
index ecde72b..17354a1 100644
--- a/arch/arm/mach-imx/clk-imx6sx.c
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -81,6 +81,14 @@
"arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
"dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
};
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static struct clk *clks[IMX6SX_CLK_CLK_END];
static struct clk_onecell_data clk_data;
@@ -143,18 +151,54 @@
clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+ /* Clock source from external clock via CLK1 PAD */
+ clks[IMX6SX_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
base = of_iomap(np, 0);
WARN_ON(!base);
- /* type name parent_name base div_mask */
- clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
- clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
- clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
- clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
- clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
- clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
- clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3);
+ clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SX_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+ clks[IMX6SX_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+ clks[IMX6SX_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+ clks[IMX6SX_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+ clks[IMX6SX_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+ clks[IMX6SX_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+ clks[IMX6SX_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+ clks[IMX6SX_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clks[IMX6SX_PLL1_BYPASS], clks[IMX6SX_CLK_PLL1]);
+ clk_set_parent(clks[IMX6SX_PLL2_BYPASS], clks[IMX6SX_CLK_PLL2]);
+ clk_set_parent(clks[IMX6SX_PLL3_BYPASS], clks[IMX6SX_CLK_PLL3]);
+ clk_set_parent(clks[IMX6SX_PLL4_BYPASS], clks[IMX6SX_CLK_PLL4]);
+ clk_set_parent(clks[IMX6SX_PLL5_BYPASS], clks[IMX6SX_CLK_PLL5]);
+ clk_set_parent(clks[IMX6SX_PLL6_BYPASS], clks[IMX6SX_CLK_PLL6]);
+ clk_set_parent(clks[IMX6SX_PLL7_BYPASS], clks[IMX6SX_CLK_PLL7]);
+
+ clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
+ clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
+ clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
/*
* Bit 20 is the reserved and read-only bit, we do this only for:
@@ -176,7 +220,8 @@
clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
- clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10);
+ clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
+ clks[IMX6SX_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index 6136405..57de74d 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -23,8 +23,6 @@
#define PLL_DENOM_OFFSET 0x20
#define BM_PLL_POWER (0x1 << 12)
-#define BM_PLL_ENABLE (0x1 << 13)
-#define BM_PLL_BYPASS (0x1 << 16)
#define BM_PLL_LOCK (0x1 << 31)
/**
@@ -84,10 +82,6 @@
if (ret)
return ret;
- val = readl_relaxed(pll->base);
- val &= ~BM_PLL_BYPASS;
- writel_relaxed(val, pll->base);
-
return 0;
}
@@ -97,7 +91,6 @@
u32 val;
val = readl_relaxed(pll->base);
- val |= BM_PLL_BYPASS;
if (pll->powerup_set)
val &= ~BM_PLL_POWER;
else
@@ -105,28 +98,6 @@
writel_relaxed(val, pll->base);
}
-static int clk_pllv3_enable(struct clk_hw *hw)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 val;
-
- val = readl_relaxed(pll->base);
- val |= BM_PLL_ENABLE;
- writel_relaxed(val, pll->base);
-
- return 0;
-}
-
-static void clk_pllv3_disable(struct clk_hw *hw)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 val;
-
- val = readl_relaxed(pll->base);
- val &= ~BM_PLL_ENABLE;
- writel_relaxed(val, pll->base);
-}
-
static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -169,8 +140,6 @@
static const struct clk_ops clk_pllv3_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
- .enable = clk_pllv3_enable,
- .disable = clk_pllv3_disable,
.recalc_rate = clk_pllv3_recalc_rate,
.round_rate = clk_pllv3_round_rate,
.set_rate = clk_pllv3_set_rate,
@@ -225,8 +194,6 @@
static const struct clk_ops clk_pllv3_sys_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
- .enable = clk_pllv3_enable,
- .disable = clk_pllv3_disable,
.recalc_rate = clk_pllv3_sys_recalc_rate,
.round_rate = clk_pllv3_sys_round_rate,
.set_rate = clk_pllv3_sys_set_rate,
@@ -299,8 +266,6 @@
static const struct clk_ops clk_pllv3_av_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
- .enable = clk_pllv3_enable,
- .disable = clk_pllv3_disable,
.recalc_rate = clk_pllv3_av_recalc_rate,
.round_rate = clk_pllv3_av_round_rate,
.set_rate = clk_pllv3_av_set_rate,
@@ -315,8 +280,6 @@
static const struct clk_ops clk_pllv3_enet_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
- .enable = clk_pllv3_enable,
- .disable = clk_pllv3_disable,
.recalc_rate = clk_pllv3_enet_recalc_rate,
};
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index f60d6d5..a178184 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -58,6 +58,8 @@
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL7_CTRL (anatop_base + 0x20)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
@@ -98,9 +100,15 @@
static struct clk *clk[VF610_CLK_END];
static struct clk_onecell_data clk_data;
+static unsigned int const clks_init_on[] __initconst = {
+ VF610_CLK_SYS_BUS,
+ VF610_CLK_DDR_SEL,
+};
+
static void __init vf610_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
+ int i;
clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000);
@@ -148,6 +156,9 @@
clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
/* pll6: default 960Mhz */
clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
+ /* pll7: USB1 PLL at 480MHz */
+ clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels));
@@ -160,8 +171,11 @@
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
- clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "pll3_main", CCM_CCGR1, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "pll3_main", CCM_CCGR7, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+
+ clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4);
clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4);
@@ -322,6 +336,9 @@
clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]);
clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
+
/* Add the clocks to provider list */
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index d5ba76f..4cdf8b6 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -36,6 +36,9 @@
struct clk * imx_obtain_fixed_clock(
const char *name, unsigned long rate);
+struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u32 exclusive_mask);
+
static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 22ba897..1dabf43 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -98,11 +98,9 @@
void v7_secondary_startup(void);
void imx_scu_map_io(void);
void imx_smp_prepare(void);
-void imx_scu_standby_enable(void);
#else
static inline void imx_scu_map_io(void) {}
static inline void imx_smp_prepare(void) {}
-static inline void imx_scu_standby_enable(void) {}
#endif
void imx_src_init(void);
void imx_gpc_init(void);
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 10844d3..aa93578 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -66,10 +66,6 @@
int __init imx6q_cpuidle_init(void)
{
- /* Need to enable SCU standby for entering WAIT modes */
- if (!cpu_is_imx6sx())
- imx_scu_standby_enable();
-
/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
imx6q_set_int_mem_clk_lpm(true);
diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h
index a21d331..bb2c90d 100644
--- a/arch/arm/mach-imx/eukrea-baseboards.h
+++ b/arch/arm/mach-imx/eukrea-baseboards.h
@@ -27,23 +27,15 @@
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls baseboard's init function.
* TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
- * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
- * or eukrea_cpuimx51sd_init().
+ * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
*
* This example here is for the development board. Refer
* mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
* mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
- * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
*/
extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimx27_baseboard_init(void);
extern void eukrea_mbimxsd35_baseboard_init(void);
-extern void eukrea_mbimx51_baseboard_init(void);
-extern void eukrea_mbimxsd51_baseboard_init(void);
#endif
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index b2f08bf..0000000
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/backlight.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int eukrea_mbimx27_pins[] __initconst = {
- /* UART2 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART3 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* UART4 */
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
-#endif
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* display */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /* SPI1 */
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
- /* SSI4 */
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
- || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
- PC16_PF_SSI4_FS,
- PC17_PF_SSI4_RXD | GPIO_PUEN,
- PC18_PF_SSI4_TXD | GPIO_PUEN,
- PC19_PF_SSI4_CLK,
-#endif
-};
-
-static const uint32_t eukrea_mbimx27_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
-};
-
-static const struct matrix_keymap_data
-eukrea_mbimx27_keymap_data __initconst = {
- .keymap = eukrea_mbimx27_keymap,
- .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
-};
-
-static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_PORTF | 16,
- },
- {
- .name = "led2",
- .default_trigger = "none",
- .active_low = 1,
- .gpio = GPIO_PORTF | 19,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimx27_gpio_led_info __initconst = {
- .leds = eukrea_mbimx27_gpio_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
- {
- .mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = 156000,
- .hsync_len = 30,
- .left_margin = 38,
- .right_margin = 20,
- .vsync_len = 3,
- .upper_margin = 15,
- .lower_margin = 4,
- },
- .pcr = 0xFAD08B80,
- .bpp = 16,
- }, {
- .mode = {
- .name = "DVI-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 32000,
- .hsync_len = 1,
- .left_margin = 35,
- .right_margin = 0,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 0,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- }, {
- .mode = {
- .name = "DVI-SVGA",
- .refresh = 60,
- .xres = 800,
- .yres = 600,
- .pixclock = 25000,
- .hsync_len = 1,
- .left_margin = 35,
- .right_margin = 0,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 0,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
- .mode = eukrea_mbimx27_modes,
- .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00040060,
-};
-
-static void eukrea_mbimx27_bl_set_intensity(int intensity)
-{
- if (intensity)
- gpio_direction_output(GPIO_PORTE | 5, 1);
- else
- gpio_direction_output(GPIO_PORTE | 5, 0);
-}
-
-static struct generic_bl_info eukrea_mbimx27_bl_info = {
- .name = "eukrea_mbimx27-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = eukrea_mbimx27_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimx27_bl_dev = {
- .name = "generic-bl",
- .id = 1,
- .dev = {
- .platform_data = &eukrea_mbimx27_bl_info,
- },
-};
-
-static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_PORTA | 25, 1);
- else
- gpio_direction_output(GPIO_PORTA | 25, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
- .set_power = eukrea_mbimx27_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimx27_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimx27_lcd_power_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void __maybe_unused ads7846_dev_init(void)
-{
- if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
- printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
- return;
- }
- gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
-};
-
-static struct spi_board_info __maybe_unused
- eukrea_mbimx27_spi_board_info[] __initdata = {
- [0] = {
- .modalias = "ads7846",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- /* irq number is run-time assigned */
- .platform_data = &ads7846_config,
- .mode = SPI_MODE_2,
- },
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
- .chipselect = eukrea_mbimx27_spi_cs,
- .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-
-static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
- .dat3_card_detect = 1,
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
- .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
- mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
- ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
- imx27_add_imx_uart1(&uart_pdata);
- imx27_add_imx_uart2(&uart_pdata);
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
- imx27_add_imx_uart3(&uart_pdata);
-#endif
-
- imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
- imx27_add_mxc_mmc(0, &sdhc_pdata);
-
- i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
- ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
-
- imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
- || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- /* ADS7846 Touchscreen controller init */
- mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
- ads7846_dev_init();
-#endif
-
- /* SPI_CS0 init */
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
- imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
- eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
- spi_register_board_info(eukrea_mbimx27_spi_board_info,
- ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-
- /* Leds configuration */
- mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
- /* Backlight */
- mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
- gpio_request(GPIO_PORTE | 5, "backlight");
- platform_device_register(&eukrea_mbimx27_bl_dev);
- /* LCD Reset */
- mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
- gpio_request(GPIO_PORTA | 25, "lcd_enable");
- platform_device_register(&eukrea_mbimx27_lcd_powerdev);
-
- imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
-
- gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/imx1-dt.c
new file mode 100644
index 0000000..6f915b0
--- /dev/null
+++ b/arch/arm/mach-imx/imx1-dt.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const char * const imx1_dt_board_compat[] __initconst = {
+ "fsl,imx1",
+ NULL
+};
+
+DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
+ .map_io = mx1_map_io,
+ .init_early = imx1_init_early,
+ .init_irq = mx1_init_irq,
+ .dt_compat = imx1_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 7c66805..1657fe6 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -64,7 +64,6 @@
return ret;
}
-EXPORT_SYMBOL(mxc_iomux_mode);
/*
* This function configures the pad value for a IOMUX pin.
@@ -90,7 +89,6 @@
spin_unlock(&gpio_mux_lock);
}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
/*
* allocs a single pin:
@@ -116,7 +114,6 @@
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
const char *label)
@@ -137,7 +134,6 @@
mxc_iomux_release_multiple_pins(pin_list, i);
return ret;
}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
void mxc_iomux_release_pin(unsigned int pin)
{
@@ -146,7 +142,6 @@
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
{
@@ -158,7 +153,6 @@
p++;
}
}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
/*
* This function enables/disables the general purpose function for a particular
@@ -178,4 +172,3 @@
__raw_writel(l, IOMUXGPR);
spin_unlock(&gpio_mux_lock);
}
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
index 2b156d1..ecd5436 100644
--- a/arch/arm/mach-imx/iomux-v1.c
+++ b/arch/arm/mach-imx/iomux-v1.c
@@ -153,7 +153,6 @@
return 0;
}
-EXPORT_SYMBOL(mxc_gpio_mode);
static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
{
@@ -178,7 +177,6 @@
ret = imx_iomuxv1_setup_multiple(pin_list, count);
return ret;
}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
int __init imx_iomuxv1_init(void __iomem *base, int numports)
{
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
index 9dae74b..d61f960 100644
--- a/arch/arm/mach-imx/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -55,7 +55,6 @@
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
{
@@ -71,7 +70,6 @@
}
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
{
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index a7e9bd2..f206052 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -537,7 +537,7 @@
gpio_free(ARMADILLO5X0_RTC_GPIO);
}
if (armadillo5x0_i2c_rtc.irq == 0)
- pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+ pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
deleted file mode 100644
index e6d4b99..0000000
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int eukrea_cpuimx27_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART4 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
-#endif
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* SDHC2 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
- /* Quad UART's IRQ */
- GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
- GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
- GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
- GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
-#endif
- /* OTG */
- PC7_PF_USBOTG_DATA5,
- PC8_PF_USBOTG_DATA6,
- PC9_PF_USBOTG_DATA0,
- PC10_PF_USBOTG_DATA2,
- PC11_PF_USBOTG_DATA1,
- PC12_PF_USBOTG_DATA4,
- PC13_PF_USBOTG_DATA3,
- PE0_PF_USBOTG_NXT,
- PE1_PF_USBOTG_STP,
- PE2_PF_USBOTG_DIR,
- PE24_PF_USBOTG_CLK,
- PE25_PF_USBOTG_DATA7,
- /* USBH2 */
- PA0_PF_USBH2_CLK,
- PA1_PF_USBH2_DIR,
- PA2_PF_USBH2_DATA7,
- PA3_PF_USBH2_NXT,
- PA4_PF_USBH2_STP,
- PD19_AF_USBH2_DATA4,
- PD20_AF_USBH2_DATA3,
- PD21_AF_USBH2_DATA6,
- PD22_AF_USBH2_DATA0,
- PD23_AF_USBH2_DATA2,
- PD24_AF_USBH2_DATA1,
- PD26_AF_USBH2_DATA5,
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
- .width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc3ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &eukrea_cpuimx27_flash_data,
- },
- .num_resources = 1,
- .resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-cpuimx27_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_cpuimx27_nor_mtd_device,
-};
-
-static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
- /* irq number is run-time assigned */
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
- /* irq number is run-time assigned */
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
- /* irq number is run-time assigned */
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
- /* irq number is run-time assigned */
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- }
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-#endif
-
-static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
- .init = eukrea_cpuimx27_otg_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = eukrea_cpuimx27_usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx27_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
-
-static void __init eukrea_cpuimx27_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
- ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
- imx27_add_imx_uart0(&uart_pdata);
-
- imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-
- i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
- imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
-
- imx27_add_fec(NULL);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_imx2_wdt();
- imx27_add_mxc_w1();
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
- /* SDHC2 can be used for Wifi */
- imx27_add_mxc_mmc(1, NULL);
-#endif
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
- /* in which case UART4 is also used for Bluetooth */
- imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
- serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
- serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
- serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
- serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
- platform_device_register(&serial_device);
-#endif
-
- if (otg_mode_host) {
- otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (otg_pdata.otg)
- imx27_add_mxc_ehci_otg(&otg_pdata);
- } else {
- imx27_add_fsl_usb2_udc(&otg_device_pdata);
- }
-
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
- eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = eukrea_cpuimx27_timer_init,
- .init_machine = eukrea_cpuimx27_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 673a734..3de3b73 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -42,6 +42,9 @@
static void __init imx6sx_init_late(void)
{
imx6q_cpuidle_init();
+
+ if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+ platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
}
static const char * const imx6sx_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
deleted file mode 100644
index 77fda3d..0000000
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * arch/arm/mach-imx/mach-mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int mx1ads_pins[] __initconst = {
- /* UART1 */
- PC9_PF_UART1_CTS,
- PC10_PF_UART1_RTS,
- PC11_PF_UART1_TXD,
- PC12_PF_UART1_RXD,
- /* UART2 */
- PB28_PF_UART2_CTS,
- PB29_PF_UART2_RTS,
- PB30_PF_UART2_TXD,
- PB31_PF_UART2_RXD,
- /* I2C */
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
- /* SPI */
- PC13_PF_SPI1_SPI_RDY,
- PC14_PF_SPI1_SCLK,
- PC15_PF_SPI1_SS,
- PC16_PF_SPI1_MISO,
- PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Physmap flash
- */
-
-static const struct physmap_flash_data mx1ads_flash_data __initconst = {
- .width = 4, /* bankwidth in bytes */
-};
-
-static const struct resource flash_resource __initconst = {
- .start = MX1_CS0_PHYS,
- .end = MX1_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
- {
- .gpio_base = 4 * 32,
- }, {
- .gpio_base = 4 * 32 + 16,
- }
-};
-
-static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8575", 0x22),
- .platform_data = &pcf857x_data[0],
- }, {
- I2C_BOARD_INFO("pcf8575", 0x24),
- .platform_data = &pcf857x_data[1],
- },
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
- imx1_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx1ads_pins,
- ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
- /* UART */
- imx1_add_imx_uart0(&uart0_pdata);
- imx1_add_imx_uart1(&uart1_pdata);
-
- /* Physmap flash */
- platform_device_register_resndata(NULL, "physmap-flash", 0,
- &flash_resource, 1,
- &mx1ads_flash_data, sizeof(mx1ads_flash_data));
-
- /* I2C */
- i2c_register_board_info(0, mx1ads_i2c_devices,
- ARRAY_SIZE(mx1ads_i2c_devices));
-
- imx1_add_imx_i2c(&mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
- mx1_clocks_init(32000);
-}
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .atag_offset = 0x100,
- .map_io = mx1_map_io,
- .init_early = imx1_init_early,
- .init_irq = mx1_init_irq,
- .init_time = mx1ads_timer_init,
- .init_machine = mx1ads_init,
- .restart = mxc_restart,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
- .atag_offset = 0x100,
- .map_io = mx1_map_io,
- .init_early = imx1_init_early,
- .init_irq = mx1_init_irq,
- .init_time = mx1ads_timer_init,
- .init_machine = mx1ads_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 453f41a..65a0dc0 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -307,7 +307,7 @@
ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
if (ret) {
- pr_warning("Unable to request the SD/MMC GPIOs.\n");
+ pr_warn("Unable to request the SD/MMC GPIOs.\n");
return ret;
}
@@ -316,7 +316,7 @@
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
- pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
+ pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
goto gpio_free;
}
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 57eac6f..4822a17 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -270,7 +270,7 @@
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
- pr_warning("could not get LAN irq gpio\n");
+ pr_warn("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
smsc911x_resources[1].start =
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
deleted file mode 100644
index 0b5d1ca..0000000
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/pca953x.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mxt_td60_pins[] __initconst = {
- /* UART0 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART1 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART2 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* FB */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA25_PF_CLS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /* OWIRE */
- PE16_AF_OWIRE,
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- PF8_AF_ATA_IORDY,
- /* SDHC2*/
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mxt_td60_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
- unsigned gpio_base, unsigned ngpio,
- void *context)
-{
- static int mxt_td60_gpio_value[] = {
- -1, -1, -1, -1, -1, -1, -1, 1
- };
- int n;
-
- for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
- gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
- if (mxt_td60_gpio_value[n] < 0)
- gpio_direction_input(gpio_base + n);
- else
- gpio_direction_output(gpio_base + n,
- mxt_td60_gpio_value[n]);
- gpio_export(gpio_base + n, 0);
- }
-
- return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
- .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */
- .invert = 0, /* Do not invert */
- .setup = mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pca9557", 0x18),
- .platform_data = &mxt_td60_pca9557_pdata,
- },
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
- {
- .mode = {
- .name = "Chimei LW700AT9003",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 30303,
- .hsync_len = 64,
- .left_margin = 0x67,
- .right_margin = 0x68,
- .vsync_len = 16,
- .upper_margin = 0x0f,
- .lower_margin = 0x0f,
- },
- .bpp = 16,
- .pcr = 0xFA208B83,
- },
-};
-
-static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
- .mode = mxt_td60_modes,
- .num_modes = ARRAY_SIZE(mxt_td60_modes),
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
- IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
- .init = mxt_td60_sdhc1_init,
- .exit = mxt_td60_sdhc1_exit,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mxt_td60_board_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
- "MXT_TD60");
-
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_imx_uart1(&uart_pdata);
- imx27_add_imx_uart2(&uart_pdata);
- imx27_add_mxc_nand(&mxt_td60_nand_board_info);
-
- i2c_register_board_info(0, mxt_td60_i2c_devices,
- ARRAY_SIZE(mxt_td60_i2c_devices));
-
- i2c_register_board_info(1, mxt_td60_i2c2_devices,
- ARRAY_SIZE(mxt_td60_i2c2_devices));
-
- imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
- imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
- imx27_add_imx_fb(&mxt_td60_fb_data);
- imx27_add_mxc_mmc(0, &sdhc1_pdata);
- imx27_add_fec(NULL);
-}
-
-static void __init mxt_td60_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
- /* maintainer: Maxtrack Industrial */
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mxt_td60_timer_init,
- .init_machine = mxt_td60_board_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 8eb1570..6d87941 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -58,7 +58,7 @@
if (!strcmp("eet", str))
pcm037_instance = PCM037_EET;
else if (strcmp("pcm970", str))
- pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+ pr_warn("Unknown pcm037 baseboard variant %s\n", str);
return 1;
}
@@ -624,7 +624,7 @@
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
if (ret)
- pr_warning("could not get LAN irq gpio\n");
+ pr_warn("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].start =
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
deleted file mode 100644
index ee862ad..0000000
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "board-pcm038.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int pcm038_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART2 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART3 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* SPI1 */
- PD25_PF_CSPI1_RDY,
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* SSI4 */
- PC16_PF_SSI4_FS,
- PC17_PF_SSI4_RXD,
- PC18_PF_SSI4_TXD,
- PC19_PF_SSI4_CLK,
- /* USB host */
- PA0_PF_USBH2_CLK,
- PA1_PF_USBH2_DIR,
- PA2_PF_USBH2_DATA7,
- PA3_PF_USBH2_NXT,
- PA4_PF_USBH2_STP,
- PD19_AF_USBH2_DATA4,
- PD20_AF_USBH2_DATA3,
- PD21_AF_USBH2_DATA6,
- PD22_AF_USBH2_DATA0,
- PD23_AF_USBH2_DATA2,
- PD24_AF_USBH2_DATA1,
- PD26_AF_USBH2_DATA5,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
- .bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
- .start = MX27_CS1_BASE_ADDR,
- .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
- .name = "mtd-ram",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_sram_data,
- },
- .num_resources = 1,
- .resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_flash_data,
- },
- .num_resources = 1,
- .resource = &pcm038_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pcm038_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &pcm038_nor_mtd_device,
- &pcm038_sram_mtd_device,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
- __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
- __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
- __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
-}
-
-static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("lm75", 0x4a),
- }
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static const struct spi_imx_master pcm038_spi0_data __initconst = {
- .chipselect = pcm038_spi_cs,
- .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
- {
- .dev_name = "imx21-mmc.1",
- .supply = "sdhc_vcc",
- },
-};
-
-static struct regulator_init_data sdhc1_data = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 0,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
- .consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
- {
- .dev_name = NULL,
- .supply = "imx_cam_vcc",
- },
-};
-
-static struct regulator_init_data cam_data = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 0,
- },
- .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
- .consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
- {
- .id = MC13783_REG_VCAM,
- .init_data = &cam_data,
- }, {
- .id = MC13783_REG_VMMC1,
- .init_data = &sdhc1_data,
- },
-};
-
-static struct mc13xxx_platform_data pcm038_pmic = {
- .regulators = {
- .regulators = pcm038_regulators,
- .num_regulators = ARRAY_SIZE(pcm038_regulators),
- },
- .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
- {
- .modalias = "mc13783",
- /* irq number is run-time assigned */
- .max_speed_hz = 300000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &pcm038_pmic,
- .mode = SPI_CS_HIGH,
- }
-};
-
-static int pcm038_usbh2_init(struct platform_device *pdev)
-{
- return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
- .init = pcm038_usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init pcm038_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
- "PCM038");
-
- pcm038_init_sram();
-
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_imx_uart1(&uart_pdata);
- imx27_add_imx_uart2(&uart_pdata);
-
- mxc_gpio_mode(PE16_AF_OWIRE);
- imx27_add_mxc_nand(&pcm038_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, pcm038_i2c_devices,
- ARRAY_SIZE(pcm038_i2c_devices));
-
- imx27_add_imx_i2c(1, &pcm038_i2c1_data);
-
- /* PE18 for user-LED D40 */
- mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
- /* MC13783 IRQ */
- mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
- imx27_add_spi_imx0(&pcm038_spi0_data);
- pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
- spi_register_board_info(pcm038_spi_board_info,
- ARRAY_SIZE(pcm038_spi_board_info));
-
- imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- imx27_add_fec(NULL);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_imx2_wdt();
- imx27_add_mxc_w1();
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
- pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = pcm038_timer_init,
- .init_machine = pcm038_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index a39b69e..17a41ca 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -43,6 +43,8 @@
#define IMX_CHIP_REVISION_1_1 0x11
#define IMX_CHIP_REVISION_1_2 0x12
#define IMX_CHIP_REVISION_1_3 0x13
+#define IMX_CHIP_REVISION_1_4 0x14
+#define IMX_CHIP_REVISION_1_5 0x15
#define IMX_CHIP_REVISION_2_0 0x20
#define IMX_CHIP_REVISION_2_1 0x21
#define IMX_CHIP_REVISION_2_2 0x22
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
deleted file mode 100644
index 51c6082..0000000
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int pcm970_pins[] __initconst = {
- /* SDHC */
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
- /* display */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA24_PF_REV,
- PA25_PF_CLS,
- PA26_PF_PS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /*
- * it seems the data line misses a pullup, so we must enable
- * the internal pullup as a local workaround
- */
- PD17_PF_I2C_DATA | GPIO_PUEN,
- PD18_PF_I2C_CLK,
- /* Camera */
- PB10_PF_CSI_D0,
- PB11_PF_CSI_D1,
- PB12_PF_CSI_D2,
- PB13_PF_CSI_D3,
- PB14_PF_CSI_D4,
- PB15_PF_CSI_MCLK,
- PB16_PF_CSI_PIXCLK,
- PB17_PF_CSI_D5,
- PB18_PF_CSI_D6,
- PB19_PF_CSI_D7,
- PB20_PF_CSI_VSYNC,
- PB21_PF_CSI_HSYNC,
-};
-
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
-{
- int ret;
-
- ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
- IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
- if (ret)
- return ret;
-
- ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
- if (ret) {
- free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
- return ret;
- }
-
- gpio_direction_input(GPIO_PORTC + 28);
-
- return 0;
-}
-
-static void pcm970_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
- gpio_free(GPIO_PORTC + 28);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
- .get_ro = pcm970_sdhc2_get_ro,
- .init = pcm970_sdhc2_init,
- .exit = pcm970_sdhc2_exit,
-};
-
-static struct imx_fb_videomode pcm970_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 7,
- .left_margin = 5,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- },
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock not inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pcr = 0xF00080C0,
- .bpp = 16,
- }, {
- .mode = {
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- },
- /*
- * - HSYNC active low (1 << 22)
- * - VSYNC active low (1 << 23)
- * - clk notenabled while idle
- * - clock not inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
- .bpp = 32,
- },
-};
-
-static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
- .mode = pcm970_modes,
- .num_modes = ARRAY_SIZE(pcm970_modes),
-
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static struct resource pcm970_sja1000_resources[] = {
- {
- .start = MX27_CS4_BASE_ADDR,
- .end = MX27_CS4_BASE_ADDR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
- },
-};
-
-static struct sja1000_platform_data pcm970_sja1000_platform_data = {
- .osc_freq = 16000000,
- .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
- .cdr = CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
- .name = "sja1000_platform",
- .dev = {
- .platform_data = &pcm970_sja1000_platform_data,
- },
- .resource = pcm970_sja1000_resources,
- .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm038 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm970_baseboard_init(void)
-{
- mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
- "PCM970");
-
- imx27_add_imx_fb(&pcm038_fb_data);
- mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
- imx27_add_mxc_mmc(1, &sdhc_pdata);
- pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
- pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
- platform_device_register(&pcm970_sja1000);
-}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 5b57c17..771bd25 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -20,8 +20,6 @@
#include "common.h"
#include "hardware.h"
-#define SCU_STANDBY_ENABLE (1 << 5)
-
u32 g_diag_reg;
static void __iomem *scu_base;
@@ -45,14 +43,6 @@
scu_base = IMX_IO_ADDRESS(base);
}
-void imx_scu_standby_enable(void)
-{
- u32 val = readl_relaxed(scu_base);
-
- val |= SCU_STANDBY_ENABLE;
- writel_relaxed(val, scu_base);
-}
-
static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index 74b50f1..ca4ea2d 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -173,6 +173,8 @@
ldr r6, [r11, #0x0]
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
ldr r6, [r11, #0x0]
+ ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+ ldr r6, [r11, #0x0]
/* use r11 to store the IO address */
ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index bf92e5a..15d18e1 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -60,17 +60,22 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35, MX25, MX5 */
+/* MX31, MX35, MX25, MX5, MX6 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
#define V2_TCTL_CLK_PER (2 << 6)
+#define V2_TCTL_CLK_OSC_DIV8 (5 << 6)
#define V2_TCTL_FRR (1 << 9)
+#define V2_TCTL_24MEN (1 << 10)
+#define V2_TPRER_PRE24M 12
#define V2_IR 0x0c
#define V2_TSTAT 0x08
#define V2_TSTAT_OF1 (1 << 0)
#define V2_TCN 0x24
#define V2_TCMP 0x10
+#define V2_TIMER_RATE_OSC_DIV8 3000000
+
#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#define timer_is_v2() (!timer_is_v1())
@@ -312,10 +317,22 @@
__raw_writel(0, timer_base + MXC_TCTL);
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
- if (timer_is_v2())
- tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
- else
+ if (timer_is_v2()) {
+ tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) {
+ tctl_val |= V2_TCTL_CLK_OSC_DIV8;
+ if (cpu_is_imx6dl() || cpu_is_imx6sx()) {
+ /* 24 / 8 = 3 MHz */
+ __raw_writel(7 << V2_TPRER_PRE24M,
+ timer_base + MXC_TPRER);
+ tctl_val |= V2_TCTL_24MEN;
+ }
+ } else {
+ tctl_val |= V2_TCTL_CLK_PER;
+ }
+ } else {
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+ }
__raw_writel(tctl_val, timer_base + MXC_TCTL);
@@ -349,9 +366,13 @@
WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
- clk_per = of_clk_get_by_name(np, "per");
clk_ipg = of_clk_get_by_name(np, "ipg");
+ /* Try osc_per first, and fall back to per otherwise */
+ clk_per = of_clk_get_by_name(np, "osc_per");
+ if (IS_ERR(clk_per))
+ clk_per = of_clk_get_by_name(np, "per");
+
_mxc_timer_init(irq, clk_per, clk_ipg);
}
CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 3ce8807..38b0da3 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -20,10 +20,13 @@
#include <linux/mm.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-vic.h>
+#include <linux/gpio/machine.h>
#include <asm/sizes.h>
#include "lm.h"
@@ -52,6 +55,13 @@
EXPORT_SYMBOL(impd1_tweak_control);
/*
+ * MMC support
+ */
+static struct mmci_platform_data mmc_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+/*
* CLCD support
*/
#define PANEL PROSPECTOR
@@ -291,6 +301,7 @@
.offset = 0x00700000,
.irq = { 7, 8 },
.id = 0x00041181,
+ .platform_data = &mmc_data,
}, {
.offset = 0x00800000,
.irq = { 9 },
@@ -372,6 +383,43 @@
pc_base = dev->resource.start + idev->offset;
snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
+
+ /* Add GPIO descriptor lookup table for the PL061 block */
+ if (idev->offset == 0x00400000) {
+ struct gpiod_lookup_table *lookup;
+ char *chipname;
+ char *mmciname;
+
+ lookup = devm_kzalloc(&dev->dev,
+ sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
+ GFP_KERNEL);
+ chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
+ mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id);
+ lookup->dev_id = mmciname;
+ /*
+ * Offsets on GPIO block 1:
+ * 3 = MMC WP (write protect)
+ * 4 = MMC CD (card detect)
+ *
+ * Offsets on GPIO block 2:
+ * 0 = Up key
+ * 1 = Down key
+ * 2 = Left key
+ * 3 = Right key
+ * 4 = Key lower left
+ * 5 = Key lower right
+ */
+ /* We need the two MMCI GPIO entries */
+ lookup->table[0].chip_label = chipname;
+ lookup->table[0].chip_hwnum = 3;
+ lookup->table[0].con_id = "wp";
+ lookup->table[1].chip_label = chipname;
+ lookup->table[1].chip_hwnum = 4;
+ lookup->table[1].con_id = "cd";
+ lookup->table[1].flags = GPIO_ACTIVE_LOW;
+ gpiod_add_lookup_table(lookup);
+ }
+
d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
irq1, irq2,
idev->platform_data, idev->id,
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
new file mode 100644
index 0000000..2c1154e
--- /dev/null
+++ b/arch/arm/mach-meson/Kconfig
@@ -0,0 +1,13 @@
+menuconfig ARCH_MESON
+ bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
+ select GENERIC_IRQ_CHIP
+ select ARM_GIC
+
+if ARCH_MESON
+
+config MACH_MESON6
+ bool "Amlogic Meson6 (8726MX) SoCs support"
+ default ARCH_MESON
+ select MESON6_TIMER
+
+endif
diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile
new file mode 100644
index 0000000..9d7380e
--- /dev/null
+++ b/arch/arm/mach-meson/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MESON) += meson.o
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
new file mode 100644
index 0000000..5ee064f
--- /dev/null
+++ b/arch/arm/mach-meson/meson.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+static const char * const m6_common_board_compat[] = {
+ "amlogic,meson6",
+ NULL,
+};
+
+DT_MACHINE_START(AML8726_MX, "Amlogic Meson6 platform")
+ .dt_compat = m6_common_board_compat,
+MACHINE_END
+
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e7189dc..11ccf0b 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,6 @@
bool "TI OMAP4"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARCH_HAS_OPP
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
@@ -44,7 +43,6 @@
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_SCU if SMP
@@ -56,14 +54,12 @@
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARCH_HAS_OPP
select ARM_GIC
select MACH_OMAP_GENERIC
select MIGHT_HAVE_CACHE_L2X0
@@ -72,7 +68,6 @@
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 69bbcba..d9dd99c6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -87,9 +87,10 @@
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_DRA7XX) += omap-mpuss-lowpower.o
+omap-4-5-pm-common = pm44xx.o omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-pm-common)
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
@@ -102,7 +103,10 @@
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+omap-4-5-idle-common = cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-idle-common)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-idle-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-idle-common)
endif
# PRCM
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e87f2a8..2d245c2 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
- board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+ board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dc571f1..b6d2989 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -60,7 +60,7 @@
}
#endif
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX))
int omap4_pm_init(void);
int omap4_pm_init_early(void);
#else
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 8897ad7..cb776431 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -49,7 +49,8 @@
return 0;
/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
- if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
+ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
+ ecc_opt == OMAP_ECC_HAM1_CODE_SW)
return 1;
else
return 0;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 8bc1338..9f42d54 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1403,8 +1403,11 @@
pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
return -ENODEV;
}
- if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
- !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+
+ if (!strcmp(s, "sw"))
+ gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+ else if (!strcmp(s, "ham1") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
gpmc_nand_data->ecc_opt =
OMAP_ECC_HAM1_CODE_HW;
else if (!strcmp(s, "bch4"))
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index d42022f..53841de 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -663,7 +663,7 @@
default:
/* Unknown default to latest silicon rev as default*/
- pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
__func__, idcode, hawkeye, rev);
omap_revision = DRA752_REV_ES1_1;
}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5d0667c..831805e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -667,6 +667,7 @@
omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap4_pm_init_early();
omap_prm_base_init();
omap_cm_base_init();
omap44xx_prm_init();
@@ -682,6 +683,8 @@
void __init omap5_init_late(void)
{
omap_common_late_init();
+ omap4_pm_init();
+ omap2_clk_enable_autoidle_all();
}
#endif
@@ -695,6 +698,7 @@
omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap4_pm_init_early();
omap_prm_base_init();
omap_cm_base_init();
omap44xx_prm_init();
@@ -709,6 +713,8 @@
void __init dra7xx_init_late(void)
{
omap_common_late_init();
+ omap4_pm_init();
+ omap2_clk_enable_autoidle_all();
}
#endif
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 4001325..6944ae3 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -56,6 +56,7 @@
#include "omap4-sar-layout.h"
#include "pm.h"
#include "prcm_mpu44xx.h"
+#include "prcm_mpu54xx.h"
#include "prminst44xx.h"
#include "prcm44xx.h"
#include "prm44xx.h"
@@ -68,7 +69,6 @@
void __iomem *scu_sar_addr;
void __iomem *wkup_sar_addr;
void __iomem *l2x0_sar_addr;
- void (*secondary_startup)(void);
};
/**
@@ -76,6 +76,7 @@
* @finish_suspend: CPU suspend finisher function pointer
* @resume: CPU resume function pointer
* @scu_prepare: CPU Snoop Control program function pointer
+ * @hotplug_restart: CPU restart function pointer
*
* Structure holds functions pointer for CPU low power operations like
* suspend, resume and scu programming.
@@ -84,11 +85,13 @@
int (*finish_suspend)(unsigned long cpu_state);
void (*resume)(void);
void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state);
+ void (*hotplug_restart)(void);
};
static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
static struct powerdomain *mpuss_pd;
static void __iomem *sar_base;
+static u32 cpu_context_offset;
static int default_finish_suspend(unsigned long cpu_state)
{
@@ -106,6 +109,7 @@
.finish_suspend = default_finish_suspend,
.resume = dummy_cpu_resume,
.scu_prepare = dummy_scu_prepare,
+ .hotplug_restart = dummy_cpu_resume,
};
/*
@@ -116,7 +120,8 @@
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
- writel_relaxed(addr, pm_info->wkup_sar_addr);
+ if (pm_info->wkup_sar_addr)
+ writel_relaxed(addr, pm_info->wkup_sar_addr);
}
/*
@@ -141,7 +146,8 @@
break;
}
- writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
+ if (pm_info->scu_sar_addr)
+ writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
}
/* Helper functions for MPUSS OSWR */
@@ -161,14 +167,14 @@
if (cpu_id) {
reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
- OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+ cpu_context_offset);
omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
- OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
+ cpu_context_offset);
} else {
reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
- OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+ cpu_context_offset);
omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
- OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
+ cpu_context_offset);
}
}
@@ -179,7 +185,8 @@
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
- writel_relaxed(save_state, pm_info->l2x0_sar_addr);
+ if (pm_info->l2x0_sar_addr)
+ writel_relaxed(save_state, pm_info->l2x0_sar_addr);
}
/*
@@ -189,10 +196,14 @@
#ifdef CONFIG_CACHE_L2X0
static void __init save_l2x0_context(void)
{
- writel_relaxed(l2x0_saved_regs.aux_ctrl,
- sar_base + L2X0_AUXCTRL_OFFSET);
- writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
- sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+ void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+ if (l2x0_base && sar_base) {
+ writel_relaxed(l2x0_saved_regs.aux_ctrl,
+ sar_base + L2X0_AUXCTRL_OFFSET);
+ writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
+ sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+ }
}
#else
static void __init save_l2x0_context(void)
@@ -231,6 +242,10 @@
save_state = 1;
break;
case PWRDM_POWER_RET:
+ if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) {
+ save_state = 0;
+ break;
+ }
default:
/*
* CPUx CSWR is invalid hardware state. Also CPUx OSWR
@@ -298,12 +313,16 @@
if (omap_rev() == OMAP4430_REV_ES1_0)
return -ENXIO;
+ /* Use the achievable power state for the domain */
+ power_state = pwrdm_get_valid_lp_state(pm_info->pwrdm,
+ false, power_state);
+
if (power_state == PWRDM_POWER_OFF)
cpu_state = 1;
pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
- set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup));
+ set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart));
omap_pm_ops.scu_prepare(cpu, power_state);
/*
@@ -319,6 +338,21 @@
/*
+ * Enable Mercury Fast HG retention mode by default.
+ */
+static void enable_mercury_retention_mode(void)
+{
+ u32 reg;
+
+ reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST,
+ OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
+ /* Enable HG_EN, HG_RAMPUP = fast mode */
+ reg |= BIT(24) | BIT(25);
+ omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST,
+ OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
+}
+
+/*
* Initialise OMAP4 MPUSS
*/
int __init omap4_mpuss_init(void)
@@ -330,13 +364,17 @@
return -ENODEV;
}
- sar_base = omap4_get_sar_ram_base();
+ if (cpu_is_omap44xx())
+ sar_base = omap4_get_sar_ram_base();
/* Initilaise per CPU PM information */
pm_info = &per_cpu(omap4_pm_info, 0x0);
- pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
- pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
- pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ if (sar_base) {
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
+ pm_info->wkup_sar_addr = sar_base +
+ CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
+ }
pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU0 pwrdm\n");
@@ -351,13 +389,12 @@
pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
pm_info = &per_cpu(omap4_pm_info, 0x1);
- pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
- pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
- pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
- if (cpu_is_omap446x())
- pm_info->secondary_startup = omap4460_secondary_startup;
- else
- pm_info->secondary_startup = omap4_secondary_startup;
+ if (sar_base) {
+ pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
+ pm_info->wkup_sar_addr = sar_base +
+ CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ }
pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
if (!pm_info->pwrdm) {
@@ -380,20 +417,27 @@
pwrdm_clear_all_prev_pwrst(mpuss_pd);
mpuss_clear_prev_logic_pwrst();
- /* Save device type on scratchpad for low level code to use */
- if (omap_type() != OMAP2_DEVICE_TYPE_GP)
- writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET);
- else
- writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET);
-
- save_l2x0_context();
+ if (sar_base) {
+ /* Save device type on scratchpad for low level code to use */
+ writel_relaxed((omap_type() != OMAP2_DEVICE_TYPE_GP) ? 1 : 0,
+ sar_base + OMAP_TYPE_OFFSET);
+ save_l2x0_context();
+ }
if (cpu_is_omap44xx()) {
omap_pm_ops.finish_suspend = omap4_finish_suspend;
omap_pm_ops.resume = omap4_cpu_resume;
omap_pm_ops.scu_prepare = scu_pwrst_prepare;
+ omap_pm_ops.hotplug_restart = omap4_secondary_startup;
+ cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET;
+ } else if (soc_is_omap54xx() || soc_is_dra7xx()) {
+ cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET;
+ enable_mercury_retention_mode();
}
+ if (cpu_is_omap446x())
+ omap_pm_ops.hotplug_restart = omap4460_secondary_startup;
+
return 0;
}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 3e97c6c..dec2b05 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -45,6 +45,7 @@
#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109
+#define OMAP5_MON_AMBA_IF_INDEX 0x108
/* Secure PPA(Primary Protected Application) APIs */
#define OMAP4_PPA_L2_POR_INDEX 0x23
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 37843a7..f961c46 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -32,6 +32,7 @@
#include "soc.h"
#include "omap4-sar-layout.h"
#include "common.h"
+#include "pm.h"
#define AM43XX_NR_REG_BANKS 7
#define AM43XX_IRQS 224
@@ -381,7 +382,7 @@
static void __init irq_pm_init(void)
{
/* FIXME: Remove this when MPU OSWR support is added */
- if (!soc_is_omap54xx())
+ if (!IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
cpu_pm_register_notifier(&irq_notifier_block);
}
#else
@@ -406,6 +407,7 @@
{
int i;
unsigned int boot_cpu = smp_processor_id();
+ u32 val;
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
@@ -451,6 +453,22 @@
for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
+ /*
+ * Enables OMAP5 ES2 PM Mode using ES2_PM_MODE in AMBA_IF_MODE
+ * 0x0: ES1 behavior, CPU cores would enter and exit OFF mode together.
+ * 0x1: ES2 behavior, CPU cores are allowed to enter/exit OFF mode
+ * independently.
+ * This needs to be set one time thanks to always ON domain.
+ *
+ * We do not support ES1 behavior anymore. OMAP5 is assumed to be
+ * ES2.0, and the same is applicable for DRA7.
+ */
+ if (soc_is_omap54xx() || soc_is_dra7xx()) {
+ val = __raw_readl(wakeupgen_base + OMAP_AMBA_IF_MODE);
+ val |= BIT(5);
+ omap_smc1(OMAP5_MON_AMBA_IF_INDEX, val);
+ }
+
irq_hotplug_init();
irq_pm_init();
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.h b/arch/arm/mach-omap2/omap-wakeupgen.h
index b0fd16f..b3c8ecc 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/omap-wakeupgen.h
@@ -27,6 +27,7 @@
#define OMAP_WKG_ENB_E_1 0x420
#define OMAP_AUX_CORE_BOOT_0 0x800
#define OMAP_AUX_CORE_BOOT_1 0x804
+#define OMAP_AMBA_IF_MODE 0x80c
#define OMAP_PTMSYNCREQ_MASK 0xc00
#define OMAP_PTMSYNCREQ_EN 0xc04
#define OMAP_TIMESTAMPCYCLELO 0xc08
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 01ef59d..d22c30d 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -56,7 +56,7 @@
r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- dev_warn(&od->pdev->dev,
+ dev_dbg(&od->pdev->dev,
"alias %s already exists\n", clk_alias);
clk_put(r);
return;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6c074f3..8fd87a3 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2185,6 +2185,8 @@
oh->mux->pads_dynamic))) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
_reconfigure_io_chain();
+ } else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ _reconfigure_io_chain();
}
_add_initiator_dep(oh, mpu_oh);
@@ -2291,6 +2293,8 @@
if (oh->mux && oh->mux->pads_dynamic) {
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
_reconfigure_io_chain();
+ } else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ _reconfigure_io_chain();
}
oh->_state = _HWMOD_STATE_IDLE;
@@ -3345,6 +3349,9 @@
if (!ois)
return 0;
+ if (ois[0] == NULL) /* Empty list */
+ return 0;
+
if (!linkspace) {
if (_alloc_linkspace(ois)) {
pr_err("omap_hwmod: could not allocate link space\n");
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 2757abf..5684f11 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -35,6 +35,7 @@
#include "i2c.h"
#include "mmc.h"
#include "wd_timer.h"
+#include "soc.h"
/* Base offset for all DRA7XX interrupts external to MPUSS */
#define DRA7XX_IRQ_GIC_START 32
@@ -3261,7 +3262,6 @@
&dra7xx_l4_per3__usb_otg_ss1,
&dra7xx_l4_per3__usb_otg_ss2,
&dra7xx_l4_per3__usb_otg_ss3,
- &dra7xx_l4_per3__usb_otg_ss4,
&dra7xx_l3_main_1__vcp1,
&dra7xx_l4_per2__vcp1,
&dra7xx_l3_main_1__vcp2,
@@ -3270,8 +3270,26 @@
NULL,
};
+static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
+ &dra7xx_l4_per3__usb_otg_ss4,
+ NULL,
+};
+
+static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
+ NULL,
+};
+
int __init dra7xx_hwmod_init(void)
{
+ int ret;
+
omap_hwmod_init();
- return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+ ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+
+ if (!ret && soc_is_dra74x())
+ return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
+ else if (!ret && soc_is_dra72x())
+ return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+
+ return ret;
}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 90c88d4..5fea34e 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -352,6 +352,16 @@
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
#endif
+#ifdef CONFIG_SOC_OMAP5
+ OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
+ OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+ OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_SOC_AM43XX
+ OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index e150102..425bfcd 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -101,6 +101,7 @@
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0)
+#define PM_OMAP4_CPU_OSWR_DISABLE (1 << 1)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
extern u16 pm44xx_errata;
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 0dda6cf..503097c 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -29,6 +29,7 @@
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
+ u32 next_logic_state;
#ifdef CONFIG_SUSPEND
u32 saved_state;
u32 saved_logic_state;
@@ -36,6 +37,8 @@
struct list_head node;
};
+static u32 cpu_suspend_state = PWRDM_POWER_OFF;
+
static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
@@ -54,7 +57,7 @@
/* Set targeted power domain states by suspend */
list_for_each_entry(pwrst, &pwrst_list, node) {
omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
- pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
+ pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state);
}
/*
@@ -66,7 +69,7 @@
* domain CSWR is not supported by hardware.
* More details can be found in OMAP4430 TRM section 4.3.4.2.
*/
- omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
+ omap4_enter_lowpower(cpu_id, cpu_suspend_state);
/* Restore next powerdomain state */
list_for_each_entry(pwrst, &pwrst_list, node) {
@@ -112,15 +115,22 @@
* through hotplug path and CPU0 explicitly programmed
* further down in the code path
*/
- if (!strncmp(pwrdm->name, "cpu", 3))
+ if (!strncmp(pwrdm->name, "cpu", 3)) {
+ if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
+ cpu_suspend_state = PWRDM_POWER_RET;
return 0;
+ }
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
- pwrst->next_state = PWRDM_POWER_RET;
+ pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false,
+ PWRDM_POWER_RET);
+ pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true,
+ PWRDM_POWER_OFF);
+
list_add(&pwrst->node, &pwrst_list);
return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
@@ -203,6 +213,32 @@
}
/**
+ * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and
+ * DRA7
+ *
+ * The dynamic dependency between MPUSS -> EMIF is broken and has
+ * not worked as expected. The hardware recommendation is to
+ * enable static dependencies for these to avoid system
+ * lock ups or random crashes.
+ */
+static inline int omap5_dra7_init_static_deps(void)
+{
+ struct clockdomain *mpuss_clkdm, *emif_clkdm;
+ int ret;
+
+ mpuss_clkdm = clkdm_lookup("mpu_clkdm");
+ emif_clkdm = clkdm_lookup("emif_clkdm");
+ if (!mpuss_clkdm || !emif_clkdm)
+ return -EINVAL;
+
+ ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
+ if (ret)
+ pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n");
+
+ return ret;
+}
+
+/**
* omap4_pm_init_early - Does early initialization necessary for OMAP4+ devices
*
* Initializes basic stuff for power management functionality.
@@ -212,6 +248,9 @@
if (cpu_is_omap446x())
pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
+ if (soc_is_omap54xx() || soc_is_dra7xx())
+ pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE;
+
return 0;
}
@@ -239,10 +278,14 @@
goto err2;
}
- if (cpu_is_omap44xx()) {
+ if (cpu_is_omap44xx())
ret = omap4_init_static_deps();
- if (ret)
- goto err2;
+ else if (soc_is_omap54xx() || soc_is_dra7xx())
+ ret = omap5_dra7_init_static_deps();
+
+ if (ret) {
+ pr_err("Failed to initialise static dependencies.\n");
+ goto err2;
}
ret = omap4_mpuss_init();
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index faebd5f..7fb033e 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -546,7 +546,8 @@
return -EINVAL;
for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
- ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
+ if (pwrdm->pwrdm_clkdms[i])
+ ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
return ret;
}
@@ -1080,6 +1081,82 @@
}
/**
+ * pwrdm_get_valid_lp_state() - Find best match deep power state
+ * @pwrdm: power domain for which we want to find best match
+ * @is_logic_state: Are we looking for logic state match here? Should
+ * be one of PWRDM_xxx macro values
+ * @req_state: requested power state
+ *
+ * Returns: closest match for requested power state. default fallback
+ * is RET for logic state and ON for power state.
+ *
+ * This does a search from the power domain data looking for the
+ * closest valid power domain state that the hardware can achieve.
+ * PRCM definitions for PWRSTCTRL allows us to program whatever
+ * configuration we'd like, and PRCM will actually attempt such
+ * a transition, however if the powerdomain does not actually support it,
+ * we endup with a hung system. The valid power domain states are already
+ * available in our powerdomain data files. So this function tries to do
+ * the following:
+ * a) find if we have an exact match to the request - no issues.
+ * b) else find if a deeper power state is possible.
+ * c) failing which, it tries to find closest higher power state for the
+ * request.
+ */
+u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm,
+ bool is_logic_state, u8 req_state)
+{
+ u8 pwrdm_states = is_logic_state ? pwrdm->pwrsts_logic_ret :
+ pwrdm->pwrsts;
+ /* For logic, ret is highest and others, ON is highest */
+ u8 default_pwrst = is_logic_state ? PWRDM_POWER_RET : PWRDM_POWER_ON;
+ u8 new_pwrst;
+ bool found;
+
+ /* If it is already supported, nothing to search */
+ if (pwrdm_states & BIT(req_state))
+ return req_state;
+
+ if (!req_state)
+ goto up_search;
+
+ /*
+ * So, we dont have a exact match
+ * Can we get a deeper power state match?
+ */
+ new_pwrst = req_state - 1;
+ found = true;
+ while (!(pwrdm_states & BIT(new_pwrst))) {
+ /* No match even at OFF? Not available */
+ if (new_pwrst == PWRDM_POWER_OFF) {
+ found = false;
+ break;
+ }
+ new_pwrst--;
+ }
+
+ if (found)
+ goto done;
+
+up_search:
+ /* OK, no deeper ones, can we get a higher match? */
+ new_pwrst = req_state + 1;
+ while (!(pwrdm_states & BIT(new_pwrst))) {
+ if (new_pwrst > PWRDM_POWER_ON) {
+ WARN(1, "powerdomain: %s: Fix max powerstate to ON\n",
+ pwrdm->name);
+ return PWRDM_POWER_ON;
+ }
+
+ if (new_pwrst == default_pwrst)
+ break;
+ new_pwrst++;
+ }
+done:
+ return new_pwrst;
+}
+
+/**
* omap_set_pwrdm_state - change a powerdomain's current power state
* @pwrdm: struct powerdomain * to change the power state of
* @pwrst: power state to change to
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index f472711..11bd4dd 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -39,6 +39,7 @@
#define PWRSTS_OFF_RET (PWRSTS_OFF | PWRSTS_RET)
#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON)
+#define PWRSTS_INA_ON (PWRSTS_INACTIVE | PWRSTS_ON)
/*
@@ -219,6 +220,9 @@
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+u8 pwrdm_get_valid_lp_state(struct powerdomain *pwrdm,
+ bool is_logic_state, u8 req_state);
+
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
int pwrdm_read_pwrst(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c
index ce1d752..60d7ed8 100644
--- a/arch/arm/mach-omap2/powerdomains54xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains54xx_data.c
@@ -35,7 +35,7 @@
.prcm_offs = OMAP54XX_PRM_CORE_INST,
.prcm_partition = OMAP54XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -107,8 +107,8 @@
.voltdm = { .name = "mpu" },
.prcm_offs = OMAP54XX_PRCM_MPU_PRM_C0_INST,
.prcm_partition = OMAP54XX_PRCM_MPU_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu0_l1 */
@@ -124,8 +124,8 @@
.voltdm = { .name = "mpu" },
.prcm_offs = OMAP54XX_PRCM_MPU_PRM_C1_INST,
.prcm_partition = OMAP54XX_PRCM_MPU_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu1_l1 */
@@ -158,7 +158,7 @@
.prcm_offs = OMAP54XX_PRM_MPU_INST,
.prcm_partition = OMAP54XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* mpu_l2 */
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 48151d1..287a203 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -160,8 +160,8 @@
.name = "core_pwrdm",
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
- .pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_INA_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* core_nret_bank */
@@ -193,8 +193,8 @@
.name = "cpu0_pwrdm",
.prcm_offs = DRA7XX_MPU_PRCM_PRM_C0_INST,
.prcm_partition = DRA7XX_MPU_PRCM_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu0_l1 */
@@ -209,8 +209,8 @@
.name = "cpu1_pwrdm",
.prcm_offs = DRA7XX_MPU_PRCM_PRM_C1_INST,
.prcm_partition = DRA7XX_MPU_PRCM_PARTITION,
- .pwrsts = PWRSTS_OFF_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts = PWRSTS_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu1_l1 */
@@ -243,7 +243,7 @@
.prcm_offs = DRA7XX_PRM_MPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_OFF_RET,
+ .pwrsts_logic_ret = PWRSTS_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* mpu_l2 */
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 2458be6..e0088e0 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/of_irq.h>
#include "soc.h"
#include "common.h"
@@ -649,6 +650,11 @@
return prm_register(&omap3xxx_prm_ll_data);
}
+static struct of_device_id omap3_prm_dt_match_table[] = {
+ { .compatible = "ti,omap3-prm" },
+ { }
+};
+
static int omap3xxx_prm_late_init(void)
{
int ret;
@@ -656,6 +662,18 @@
if (!(prm_features & PRM_HAS_IO_WAKEUP))
return 0;
+ if (of_have_populated_dt()) {
+ struct device_node *np;
+ int irq_num;
+
+ np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
+ if (np) {
+ irq_num = of_irq_get(np, 0);
+ if (irq_num >= 0)
+ omap3_prcm_irq_setup.irq = irq_num;
+ }
+ }
+
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a7f6ea2..0958d07 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,6 +17,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of_irq.h>
#include "soc.h"
@@ -32,7 +33,6 @@
/* Static data */
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
- OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
@@ -154,21 +154,36 @@
u32 omap4_prm_vcvp_read(u8 offset)
{
+ s32 inst = omap4_prmst_get_prm_dev_inst();
+
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return 0;
+
return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST, offset);
+ inst, offset);
}
void omap4_prm_vcvp_write(u32 val, u8 offset)
{
+ s32 inst = omap4_prmst_get_prm_dev_inst();
+
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return;
+
omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST, offset);
+ inst, offset);
}
u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
{
+ s32 inst = omap4_prmst_get_prm_dev_inst();
+
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return 0;
+
return omap4_prminst_rmw_inst_reg_bits(mask, bits,
OMAP4430_PRM_PARTITION,
- OMAP4430_PRM_DEVICE_INST,
+ inst,
offset);
}
@@ -275,14 +290,18 @@
void omap44xx_prm_reconfigure_io_chain(void)
{
int i = 0;
+ s32 inst = omap4_prmst_get_prm_dev_inst();
+
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return;
/* Trigger WUCLKIN enable */
omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
OMAP4430_WUCLK_CTRL_MASK,
- OMAP4430_PRM_DEVICE_INST,
+ inst,
OMAP4_PRM_IO_PMCTRL_OFFSET);
omap_test_timeout(
- (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ (((omap4_prm_read_inst_reg(inst,
OMAP4_PRM_IO_PMCTRL_OFFSET) &
OMAP4430_WUCLK_STATUS_MASK) >>
OMAP4430_WUCLK_STATUS_SHIFT) == 1),
@@ -292,10 +311,10 @@
/* Trigger WUCLKIN disable */
omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
- OMAP4430_PRM_DEVICE_INST,
+ inst,
OMAP4_PRM_IO_PMCTRL_OFFSET);
omap_test_timeout(
- (((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ (((omap4_prm_read_inst_reg(inst,
OMAP4_PRM_IO_PMCTRL_OFFSET) &
OMAP4430_WUCLK_STATUS_MASK) >>
OMAP4430_WUCLK_STATUS_SHIFT) == 0),
@@ -316,9 +335,14 @@
*/
static void __init omap44xx_prm_enable_io_wakeup(void)
{
+ s32 inst = omap4_prmst_get_prm_dev_inst();
+
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return;
+
omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
OMAP4430_GLOBAL_WUEN_MASK,
- OMAP4430_PRM_DEVICE_INST,
+ inst,
OMAP4_PRM_IO_PMCTRL_OFFSET);
}
@@ -333,8 +357,13 @@
struct prm_reset_src_map *p;
u32 r = 0;
u32 v;
+ s32 inst = omap4_prmst_get_prm_dev_inst();
- v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return 0;
+
+
+ v = omap4_prm_read_inst_reg(inst,
OMAP4_RM_RSTST);
p = omap44xx_prm_reset_src_map;
@@ -664,17 +693,56 @@
int __init omap44xx_prm_init(void)
{
- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
prm_features |= PRM_HAS_IO_WAKEUP;
return prm_register(&omap44xx_prm_ll_data);
}
+static struct of_device_id omap_prm_dt_match_table[] = {
+ { .compatible = "ti,omap4-prm" },
+ { .compatible = "ti,omap5-prm" },
+ { .compatible = "ti,dra7-prm" },
+ { }
+};
+
static int omap44xx_prm_late_init(void)
{
+ struct device_node *np;
+ int irq_num;
+
if (!(prm_features & PRM_HAS_IO_WAKEUP))
return 0;
+ /* OMAP4+ is DT only now */
+ if (!of_have_populated_dt())
+ return 0;
+
+ np = of_find_matching_node(NULL, omap_prm_dt_match_table);
+
+ if (!np) {
+ /* Default loaded up with OMAP4 values */
+ if (!cpu_is_omap44xx())
+ return 0;
+ } else {
+ irq_num = of_irq_get(np, 0);
+ /*
+ * Already have OMAP4 IRQ num. For all other platforms, we need
+ * IRQ numbers from DT
+ */
+ if (irq_num < 0 && !cpu_is_omap44xx()) {
+ if (irq_num == -EPROBE_DEFER)
+ return irq_num;
+
+ /* Have nothing to do */
+ return 0;
+ }
+
+ /* Once OMAP4 DT is filled as well */
+ if (irq_num >= 0)
+ omap4_prcm_irq_setup.irq = irq_num;
+ }
+
omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 69f0dd0..225e025 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -31,6 +31,8 @@
static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
+static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN;
+
/**
* omap_prm_base_init - Populates the prm partitions
*
@@ -43,6 +45,24 @@
_prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
}
+s32 omap4_prmst_get_prm_dev_inst(void)
+{
+ if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
+ return prm_dev_inst;
+
+ /* This cannot be done way early at boot.. as things are not setup */
+ if (cpu_is_omap44xx())
+ prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
+ else if (soc_is_omap54xx())
+ prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
+ else if (soc_is_dra7xx())
+ prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
+ else if (soc_is_am43xx())
+ prm_dev_inst = AM43XX_PRM_DEVICE_INST;
+
+ return prm_dev_inst;
+}
+
/* Read a register in a PRM instance */
u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
@@ -169,28 +189,18 @@
void omap4_prminst_global_warm_sw_reset(void)
{
u32 v;
- s16 dev_inst;
+ s32 inst = omap4_prmst_get_prm_dev_inst();
- if (cpu_is_omap44xx())
- dev_inst = OMAP4430_PRM_DEVICE_INST;
- else if (soc_is_omap54xx())
- dev_inst = OMAP54XX_PRM_DEVICE_INST;
- else if (soc_is_dra7xx())
- dev_inst = DRA7XX_PRM_DEVICE_INST;
- else if (soc_is_am43xx())
- dev_inst = AM43XX_PRM_DEVICE_INST;
- else
+ if (inst == PRM_INSTANCE_UNKNOWN)
return;
- v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst,
+ v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, inst,
OMAP4_PRM_RSTCTRL_OFFSET);
v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
- dev_inst,
- OMAP4_PRM_RSTCTRL_OFFSET);
+ inst, OMAP4_PRM_RSTCTRL_OFFSET);
/* OCP barrier */
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- dev_inst,
- OMAP4_PRM_RSTCTRL_OFFSET);
+ inst, OMAP4_PRM_RSTCTRL_OFFSET);
}
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index a2ede2d..583aa37 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -12,6 +12,9 @@
#ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
#define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
+#define PRM_INSTANCE_UNKNOWN -1
+extern s32 omap4_prmst_get_prm_dev_inst(void);
+
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 01ca808..4376f59 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -245,6 +245,8 @@
#define soc_is_omap54xx() 0
#define soc_is_omap543x() 0
#define soc_is_dra7xx() 0
+#define soc_is_dra74x() 0
+#define soc_is_dra72x() 0
#if defined(MULTI_OMAP2)
# if defined(CONFIG_ARCH_OMAP2)
@@ -393,7 +395,11 @@
#if defined(CONFIG_SOC_DRA7XX)
#undef soc_is_dra7xx
+#undef soc_is_dra74x
+#undef soc_is_dra72x
#define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7"))
+#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74"))
+#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72"))
#endif
/* Various silicon revisions for omap2 */
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index e15dff7..8bd5bf2 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -26,6 +26,11 @@
bool "RZ/A1H (R7S72100)"
select SYS_SUPPORTS_SH_MTU2
+config ARCH_R8A7740
+ bool "R-Mobile A1 (R8A77400)"
+ select ARCH_RMOBILE
+ select RENESAS_INTC_IRQPIN
+
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select RENESAS_INTC_IRQPIN
@@ -41,11 +46,11 @@
select RENESAS_IRQC
select SYS_SUPPORTS_SH_CMT
-comment "Renesas ARM SoCs Board Type"
+config ARCH_R8A7794
+ bool "R-Car E2 (R8A77940)"
+ select ARCH_RCAR_GEN2
-config MACH_GENMAI
- bool "Genmai board"
- depends on ARCH_R7S72100
+comment "Renesas ARM SoCs Board Type"
config MACH_KOELSCH
bool "Koelsch board"
@@ -75,6 +80,7 @@
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
+ select SH_INTC
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@@ -85,6 +91,7 @@
select CPU_V7
select I2C
select SH_CLK_CPG
+ select SH_INTC
select RENESAS_INTC_IRQPIN
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@@ -149,14 +156,6 @@
select SYS_SUPPORTS_SH_CMT
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-config ARCH_R7S72100
- bool "RZ/A1H (R7S72100)"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select CPU_V7
- select SH_CLK_CPG
- select SYS_SUPPORTS_SH_MTU2
-
comment "Renesas ARM SoCs Board Type"
config MACH_APE6EVM
@@ -195,21 +194,6 @@
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
-config MACH_ARMADILLO800EVA_REFERENCE
- bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
- depends on ARCH_R8A7740
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SMSC_PHY if SH_ETH
- select SND_SOC_WM8978 if SND_SIMPLE_CARD
- select USE_OF
- ---help---
- Use reference implementation of Armadillo800 EVA board support
- which makes greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
@@ -232,11 +216,6 @@
This is intended to aid developers
-config MACH_GENMAI
- bool "Genmai board"
- depends on ARCH_R7S72100
- select USE_OF
-
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fe3878a..d7337a5 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
-
# Common objects
obj-y := timer.o console.o
@@ -17,6 +15,7 @@
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
@@ -31,7 +30,6 @@
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
-obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
# CPU reset vector handling objects
@@ -63,7 +61,6 @@
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
@@ -73,11 +70,9 @@
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
-obj-$(CONFIG_MACH_GENMAI) += board-genmai.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index ebf97d4..de9a238 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -3,10 +3,8 @@
loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index 2f7723e..a6503d8 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -50,7 +50,6 @@
r8a73a4_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
@@ -59,7 +58,8 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = ape6evm_add_standard_devices,
+ .init_late = shmobile_init_late,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 1585b88..b222f68 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -283,7 +283,8 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = ape6evm_add_standard_devices,
+ .init_late = shmobile_init_late,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
deleted file mode 100644
index 84bc6cb..0000000
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- * CON1 Camera Module
- * CON2 Extension Bus
- * CON3 HDMI Output
- * CON4 Composite Video Output
- * CON5 H-UDI JTAG
- * CON6 ARM JTAG
- * CON7 SD1
- * CON8 SD2
- * CON9 RTC BackUp
- * CON10 Monaural Mic Input
- * CON11 Stereo Headphone Output
- * CON12 Audio Line Output(L)
- * CON13 Audio Line Output(R)
- * CON14 AWL13 Module
- * CON15 Extension
- * CON16 LCD1
- * CON17 LCD2
- * CON19 Power Input
- * CON20 USB1
- * CON21 USB2
- * CON22 Serial
- * CON23 LAN
- * CON24 USB3
- * LED1 Camera LED (Yellow)
- * LED2 Power LED (Green)
- * LED3-LED6 User LED (Yellow)
- * LED7 LAN link LED (Green)
- * LED8 LAN activity LED (Yellow)
- */
-
-/*
- * DipSwitch
- *
- * SW1
- *
- * -12345678-+---------------+----------------------------
- * 1 | boot | hermit
- * 0 | boot | OS auto boot
- * -12345678-+---------------+----------------------------
- * 00 | boot device | eMMC
- * 10 | boot device | SDHI0 (CON7)
- * 01 | boot device | -
- * 11 | boot device | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- * 0 | Extension Bus | D8-D15 disable, eMMC enable
- * 1 | Extension Bus | D8-D15 enable, eMMC disable
- * -12345678-+---------------+----------------------------
- * 0 | SDHI1 | COM8 disable, COM14 enable
- * 1 | SDHI1 | COM8 enable, COM14 disable
- * -12345678-+---------------+----------------------------
- * 0 | USB0 | COM20 enable, COM24 disable
- * 1 | USB0 | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- * 00 | JTAG | SH-X2
- * 10 | JTAG | ARM
- * 01 | JTAG | -
- * 11 | JTAG | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- * usbhsf_power_ctrl()
- */
-
-static void __init eva_clock_init(void)
-{
- struct clk *system = clk_get(NULL, "system_clk");
- struct clk *xtal1 = clk_get(NULL, "extal1");
- struct clk *usb24s = clk_get(NULL, "usb24s");
- struct clk *fsibck = clk_get(NULL, "fsibck");
-
- if (IS_ERR(system) ||
- IS_ERR(xtal1) ||
- IS_ERR(usb24s) ||
- IS_ERR(fsibck)) {
- pr_err("armadillo800eva board clock init failed\n");
- goto clock_error;
- }
-
- /* armadillo 800 eva extal1 is 24MHz */
- clk_set_rate(xtal1, 24000000);
-
- /* usb24s use extal1 (= system) clock (= 24MHz) */
- clk_set_parent(usb24s, system);
-
- /* FSIBCK is 12.288MHz, and it is parent of FSI-B */
- clk_set_rate(fsibck, 12288000);
-
-clock_error:
- if (!IS_ERR(system))
- clk_put(system);
- if (!IS_ERR(xtal1))
- clk_put(xtal1);
- if (!IS_ERR(usb24s))
- clk_put(usb24s);
- if (!IS_ERR(fsibck))
- clk_put(fsibck);
-}
-
-/*
- * board init
- */
-static void __init eva_init(void)
-{
- r8a7740_clock_init(MD_CK0 | MD_CK2);
- eva_clock_init();
-
- r8a7740_meram_workaround();
-
-#ifdef CONFIG_CACHE_L2X0
- /* Shared attribute override enable, 32K*8way */
- l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
- r8a7740_add_standard_devices_dt();
-
- r8a7740_pm_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Do soft power on reset */
- writel(1 << 31, RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
- "renesas,armadillo800eva-reference",
- NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
- .map_io = r8a7740_map_io,
- .init_early = shmobile_init_delay,
- .init_irq = r8a7740_init_irq_of,
- .init_machine = eva_init,
- .init_late = shmobile_init_late,
- .dt_compat = eva_boards_compat_dt,
- .restart = eva_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index ba840cd..79c4784 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -80,8 +80,9 @@
};
DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = r8a7778_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
+ .init_late = shmobile_init_late,
.dt_compat = bockw_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 8a83eb3..1cf2c75 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -733,7 +733,7 @@
};
DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = r8a7778_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.dt_compat = bockw_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
deleted file mode 100644
index e5448f7..0000000
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Genmai board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "clock.h"
-#include "common.h"
-#include "r7s72100.h"
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] = {
- { "mtu2", "fck", "sh-mtu2" },
-};
-
-static void __init genmai_add_standard_devices(void)
-{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true);
- r7s72100_add_dt_devices();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
- "renesas,genmai",
- NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = shmobile_init_delay,
- .init_machine = genmai_add_standard_devices,
- .dt_compat = genmai_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
deleted file mode 100644
index 7bf2d80..0000000
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Genmai board support
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r7s72100.h"
-
-/* Ether */
-static const struct sh_eth_plat_data ether_pdata __initconst = {
- .phy = 0x00, /* PD60610 */
- .edmac_endian = EDMAC_LITTLE_ENDIAN,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .no_ether_link = 1
-};
-
-static const struct resource ether_resources[] __initconst = {
- DEFINE_RES_MEM(0xe8203000, 0x800),
- DEFINE_RES_MEM(0xe8204800, 0x200),
- DEFINE_RES_IRQ(gic_iid(359)),
-};
-
-static const struct platform_device_info ether_info __initconst = {
- .name = "r7s72100-ether",
- .id = -1,
- .res = ether_resources,
- .num_res = ARRAY_SIZE(ether_resources),
- .data = ðer_pdata,
- .size_data = sizeof(ether_pdata),
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-/* RSPI */
-#define RSPI_RESOURCE(idx, baseaddr, irq) \
-static const struct resource rspi##idx##_resources[] __initconst = { \
- DEFINE_RES_MEM(baseaddr, 0x24), \
- DEFINE_RES_IRQ_NAMED(irq, "error"), \
- DEFINE_RES_IRQ_NAMED(irq + 1, "rx"), \
- DEFINE_RES_IRQ_NAMED(irq + 2, "tx"), \
-}
-
-RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
-RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
-RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
-RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
-RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
-
-static const struct rspi_plat_data rspi_pdata __initconst = {
- .num_chipselect = 1,
-};
-
-#define r7s72100_register_rspi(idx) \
- platform_device_register_resndata(NULL, "rspi-rz", idx, \
- rspi##idx##_resources, \
- ARRAY_SIZE(rspi##idx##_resources), \
- &rspi_pdata, sizeof(rspi_pdata))
-
-static const struct spi_board_info spi_info[] __initconst = {
- {
- .modalias = "wm8978",
- .max_speed_hz = 5000000,
- .bus_num = 4,
- .chip_select = 0,
- },
-};
-
-/* SCIF */
-#define R7S72100_SCIF(index, baseaddr, irq) \
-static const struct plat_sci_port scif##index##_platform_data = { \
- .type = PORT_SCIF, \
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \
- SCSCR_REIE, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq + 1), \
- DEFINE_RES_IRQ(irq + 2), \
- DEFINE_RES_IRQ(irq + 3), \
- DEFINE_RES_IRQ(irq), \
-} \
-
-R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
-R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
-R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
-R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
-R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
-R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
-R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
-R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
-
-#define r7s72100_register_scif(index) \
- platform_device_register_resndata(NULL, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-static void __init genmai_add_standard_devices(void)
-{
- r7s72100_clock_init();
- r7s72100_add_dt_devices();
-
- platform_device_register_full(ðer_info);
-
- r7s72100_register_rspi(0);
- r7s72100_register_rspi(1);
- r7s72100_register_rspi(2);
- r7s72100_register_rspi(3);
- r7s72100_register_rspi(4);
- spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-
- r7s72100_register_scif(0);
- r7s72100_register_scif(1);
- r7s72100_register_scif(2);
- r7s72100_register_scif(3);
- r7s72100_register_scif(4);
- r7s72100_register_scif(5);
- r7s72100_register_scif(6);
- r7s72100_register_scif(7);
-}
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
- "renesas,genmai",
- NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = shmobile_init_delay,
- .init_machine = genmai_add_standard_devices,
- .dt_compat = genmai_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index 3ff88c1..9db5e67 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -88,7 +88,6 @@
* devices until they get moved to DT.
*/
static const struct clk_name clk_names[] __initconst = {
- { "cmt0", "fck", "sh-cmt-48-gen2.0" },
{ "du0", "du.0", "rcar-du-r8a7791" },
{ "du1", "du.1", "rcar-du-r8a7791" },
{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
@@ -97,7 +96,6 @@
static void __init koelsch_add_standard_devices(void)
{
shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- r8a7791_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
koelsch_add_du_device();
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 5d2621f..d9cdf9a 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -51,8 +51,8 @@
DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
- .init_early = sh73a0_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
+ .init_early = shmobile_init_delay,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f8bc7f8..77e36fa 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -50,6 +50,7 @@
#include <video/sh_mobile_lcdc.h>
#include "common.h"
+#include "intc.h"
#include "irqs.h"
#include "sh73a0.h"
@@ -910,7 +911,6 @@
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 41c808e..2a05c02 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -92,7 +92,6 @@
* devices until they get moved to DT.
*/
static const struct clk_name clk_names[] __initconst = {
- { "cmt0", "fck", "sh-cmt-48-gen2.0" },
{ "du0", "du.0", "rcar-du-r8a7790" },
{ "du1", "du.1", "rcar-du-r8a7790" },
{ "du2", "du.2", "rcar-du-r8a7790" },
@@ -103,7 +102,6 @@
static void __init lager_add_standard_devices(void)
{
shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- r8a7790_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
lager_add_du_device();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 79f448e..b7c4261 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -63,6 +63,7 @@
#include <asm/mach-types.h>
#include "common.h"
+#include "intc.h"
#include "irqs.h"
#include "pm-rmobile.h"
#include "sh-gpio.h"
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 21b3e1c..38d9cdd 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -37,18 +37,8 @@
clocksource_of_init();
}
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
- { "tmu0", "fck", "sh-tmu.0" },
-};
-
static void __init marzen_init(void)
{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- r8a7779_add_standard_devices_dt();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
}
@@ -64,8 +54,8 @@
.map_io = r8a7779_map_io,
.init_early = shmobile_init_delay,
.init_time = marzen_init_timer,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = marzen_init,
+ .init_late = shmobile_init_late,
.dt_compat = marzen_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
deleted file mode 100644
index 3eb2ec4..0000000
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * r7a72100 clock framework support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2012 Phil Edworthy
- * Copyright (C) 2011 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "common.h"
-#include "r7s72100.h"
-
-/* Frequency Control Registers */
-#define FRQCR 0xfcfe0010
-#define FRQCR2 0xfcfe0014
-/* Standby Control Registers */
-#define STBCR3 0xfcfe0420
-#define STBCR4 0xfcfe0424
-#define STBCR7 0xfcfe0430
-#define STBCR9 0xfcfe0438
-#define STBCR10 0xfcfe043c
-
-#define PLL_RATE 30
-
-static struct clk_mapping cpg_mapping = {
- .phys = 0xfcfe0000,
- .len = 0x1000,
-};
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 13330000,
- .mapping = &cpg_mapping,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long bus_recalc(struct clk *clk)
-{
- return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops bus_clk_ops = {
- .recalc = bus_recalc,
-};
-
-static struct clk bus_clk = {
- .ops = &bus_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
- return clk->parent->rate / 12;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
- .recalc = peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
- .ops = &peripheral0_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
- return clk->parent->rate / 6;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
- .recalc = peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
- .ops = &peripheral1_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
- &bus_clk,
- &peripheral0_clk,
- &peripheral1_clk,
-};
-
-static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
-static int multipliers[] = { 1, 2, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
-};
-
-enum {
- MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
- MSTP97, MSTP96, MSTP95, MSTP94,
- MSTP74,
- MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP33, MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
- [MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
- [MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
- [MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
- [MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
- [MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
- [MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
- [MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
- [MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
- [MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
- [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
- [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
- [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
- [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
- [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
- [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
- [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
- [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
- [MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP clocks */
- CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
- CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
- CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
- CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
- CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
- CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
-
- /* ICK */
- CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]),
-};
-
-void __init r7s72100_clock_init(void)
-{
- int k, ret = 0;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup rza1 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 17435c1..126ddaf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -183,8 +183,8 @@
static struct clk div4_clks[DIV4_NR] = {
[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
- [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
+ [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT),
};
/* DIV6 clocks */
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 10e193d..453b231 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -152,7 +152,7 @@
static struct clk div4_clks[DIV4_NR] = {
[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
};
/* DIV6 clocks */
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index d8c4048..02a6f45 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -644,7 +644,7 @@
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
- CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 9805608..72087c7 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,8 +2,6 @@
#define __ARCH_MACH_COMMON_H
extern void shmobile_earlytimer_init(void);
-extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div);
extern void shmobile_init_delay(void);
struct twd_local_timer;
extern void shmobile_setup_console(void);
diff --git a/arch/arm/mach-shmobile/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
index 97c40bd..52a2f66 100644
--- a/arch/arm/mach-shmobile/dma-register.h
+++ b/arch/arm/mach-shmobile/dma-register.h
@@ -52,8 +52,8 @@
((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
(((i) & TS_HI_BIT) << TS_HI_SHIFT))
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
/*
diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h
index a5603c7..40b2ad4 100644
--- a/arch/arm/mach-shmobile/intc.h
+++ b/arch/arm/mach-shmobile/intc.h
@@ -287,4 +287,9 @@
p ## _sense_registers, NULL), \
}
+/* INTCS */
+#define INTCS_VECT_BASE 0x3400
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
#endif /* __ASM_MACH_INTC_H */
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
index 4ff2d2a..3070f6d 100644
--- a/arch/arm/mach-shmobile/irqs.h
+++ b/arch/arm/mach-shmobile/irqs.h
@@ -1,18 +1,12 @@
#ifndef __SHMOBILE_IRQS_H
#define __SHMOBILE_IRQS_H
-#include <linux/sh_intc.h>
-#include <mach/irqs.h>
+#include "include/mach/irqs.h"
/* GIC */
#define gic_spi(nr) ((nr) + 32)
#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
-
/* GPIO IRQ */
#define _GPIO_IRQ_BASE 2500
#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index a0d44d5..4d327de 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -13,7 +13,7 @@
#include "common.h"
#include "pm-rmobile.h"
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
static int r8a7740_pd_a4s_suspend(void)
{
/*
@@ -58,8 +58,7 @@
rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
pm_genpd_add_subdomain_names("A4S", "A3SP");
}
-
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
#ifdef CONFIG_SUSPEND
static int r8a7740_enter_suspend(suspend_state_t suspend_state)
diff --git a/arch/arm/mach-shmobile/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h
deleted file mode 100644
index efb723c..0000000
--- a/arch/arm/mach-shmobile/r7s72100.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_R7S72100_H__
-#define __ASM_R7S72100_H__
-
-void r7s72100_add_dt_devices(void);
-void r7s72100_clock_init(void);
-
-#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h
index ce8bdd1..5fafd6f 100644
--- a/arch/arm/mach-shmobile/r8a73a4.h
+++ b/arch/arm/mach-shmobile/r8a73a4.h
@@ -14,6 +14,5 @@
void r8a73a4_add_dt_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
-void r8a73a4_init_early(void);
#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index 1d1a5fd..f369b4b 100644
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -49,15 +49,14 @@
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_add_standard_devices_dt(void);
extern void r8a7740_clock_init(u8 md_ck);
extern void r8a7740_pinmux_init(void);
extern void r8a7740_pm_init(void);
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
extern void __init r8a7740_init_pm_domains(void);
#else
static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
index 5415c71..19f9704 100644
--- a/arch/arm/mach-shmobile/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -17,7 +17,6 @@
extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
-extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_init_late(void);
extern u32 r8a7779_read_mode_pins(void);
extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
index 459827f..388f051 100644
--- a/arch/arm/mach-shmobile/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -27,7 +27,6 @@
};
void r8a7790_add_standard_devices(void);
-void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_pm_init(void);
diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h
index 86eae7b..c1bf7ab 100644
--- a/arch/arm/mach-shmobile/r8a7791.h
+++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -2,7 +2,6 @@
#define __ASM_R8A7791_H__
void r8a7791_add_standard_devices(void);
-void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_pinmux_init(void);
void r8a7791_pm_init(void);
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index f3b3b14..4122104 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -18,34 +18,12 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/irq.h>
#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/sh_timer.h>
#include <asm/mach/arch.h>
#include "common.h"
-#include "irqs.h"
-#include "r7s72100.h"
-static struct resource mtu2_resources[] __initdata = {
- DEFINE_RES_MEM(0xfcff0000, 0x400),
- DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
-};
-
-#define r7s72100_register_mtu2() \
- platform_device_register_resndata(NULL, "sh-mtu2", \
- -1, mtu2_resources, \
- ARRAY_SIZE(mtu2_resources), \
- NULL, 0)
-
-void __init r7s72100_add_dt_devices(void)
-{
- r7s72100_register_mtu2();
-}
-
-#ifdef CONFIG_USE_OF
static const char *r7s72100_boards_compat_dt[] __initdata = {
"renesas,r7s72100",
NULL,
@@ -53,6 +31,6 @@
DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
.init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
.dt_compat = r7s72100_boards_compat_dt,
MACHINE_END
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 6683072..53f40b7 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -295,13 +295,6 @@
r8a73a4_register_dmac();
}
-void __init r8a73a4_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char *r8a73a4_boards_compat_dt[] __initdata = {
@@ -310,7 +303,8 @@
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
- .init_early = r8a73a4_init_early,
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 3d5eaca..daea3a3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -36,6 +36,7 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "dma-register.h"
@@ -311,10 +312,6 @@
.num_resources = ARRAY_SIZE(ipmmu_resources),
};
-static struct platform_device *r8a7740_devices_dt[] __initdata = {
- &cmt1_device,
-};
-
static struct platform_device *r8a7740_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
@@ -331,6 +328,7 @@
&irqpin3_device,
&tmu0_device,
&ipmmu_device,
+ &cmt1_device,
};
/* DMA */
@@ -756,8 +754,6 @@
/* add devices */
platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
- platform_add_devices(r8a7740_devices_dt,
- ARRAY_SIZE(r8a7740_devices_dt));
platform_add_devices(r8a7740_late_devices,
ARRAY_SIZE(r8a7740_late_devices));
@@ -779,8 +775,6 @@
{
early_platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
- early_platform_add_devices(r8a7740_devices_dt,
- ARRAY_SIZE(r8a7740_devices_dt));
/* setup early console here as well */
shmobile_setup_console();
@@ -788,13 +782,6 @@
#ifdef CONFIG_USE_OF
-void __init r8a7740_add_standard_devices_dt(void)
-{
- platform_add_devices(r8a7740_devices_dt,
- ARRAY_SIZE(r8a7740_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
void __init r8a7740_init_irq_of(void)
{
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
@@ -827,8 +814,20 @@
static void __init r8a7740_generic_init(void)
{
- r8a7740_clock_init(0);
- r8a7740_add_standard_devices_dt();
+ r8a7740_meram_workaround();
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 32K*8way */
+ l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
+#endif
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+#define RESCNT2 IOMEM(0xe6188020)
+static void r8a7740_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel(1 << 31, RESCNT2);
}
static const char *r8a7740_boards_compat_dt[] __initdata = {
@@ -843,6 +842,7 @@
.init_machine = r8a7740_generic_init,
.init_late = shmobile_init_late,
.dt_compat = r8a7740_boards_compat_dt,
+ .restart = r8a7740_restart,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index f00a488..85fe016 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -520,6 +520,7 @@
void __init r8a7778_init_late(void)
{
+ shmobile_init_late();
platform_device_register_full(&ehci_info);
platform_device_register_full(&ohci_info);
}
@@ -573,7 +574,7 @@
void __init r8a7778_init_delay(void)
{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+ shmobile_init_delay();
}
#ifdef CONFIG_USE_OF
@@ -609,8 +610,8 @@
DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
+ .init_late = shmobile_init_late,
.dt_compat = r8a7778_compat_dt,
- .init_late = r8a7778_init_late,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 236c1be..136078a 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -641,7 +641,7 @@
sizeof(dma_platform_data));
}
-static struct platform_device *r8a7779_devices_dt[] __initdata = {
+static struct platform_device *r8a7779_early_devices[] __initdata = {
&tmu0_device,
};
@@ -669,8 +669,8 @@
r8a7779_init_pm_domains();
- platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
+ platform_add_devices(r8a7779_early_devices,
+ ARRAY_SIZE(r8a7779_early_devices));
platform_add_devices(r8a7779_standard_devices,
ARRAY_SIZE(r8a7779_standard_devices));
r8a7779_register_hpb_dmae();
@@ -678,8 +678,8 @@
void __init r8a7779_add_early_devices(void)
{
- early_platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
+ early_platform_add_devices(r8a7779_early_devices,
+ ARRAY_SIZE(r8a7779_early_devices));
/* Early serial console setup is not included here due to
* memory map collisions. The SCIF serial ports in r8a7779
@@ -739,12 +739,6 @@
__raw_writel(0x003fee3f, INT2SMSKCR4);
}
-void __init r8a7779_add_standard_devices_dt(void)
-{
- platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
-}
-
#define MODEMR 0xffcc0020
u32 __init r8a7779_read_mode_pins(void)
@@ -771,10 +765,8 @@
DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
.map_io = r8a7779_map_io,
.init_early = shmobile_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
- .init_machine = r8a7779_add_standard_devices_dt,
- .init_late = r8a7779_init_late,
+ .init_late = shmobile_init_late,
.dt_compat = r8a7779_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 0c12b01..877fdeb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -282,11 +282,6 @@
&cmt##idx##_platform_data, \
sizeof(struct sh_timer_config))
-void __init r8a7790_add_dt_devices(void)
-{
- r8a7790_register_cmt(0);
-}
-
void __init r8a7790_add_standard_devices(void)
{
r8a7790_register_scif(0);
@@ -299,7 +294,7 @@
r8a7790_register_scif(7);
r8a7790_register_scif(8);
r8a7790_register_scif(9);
- r8a7790_add_dt_devices();
+ r8a7790_register_cmt(0);
r8a7790_register_irqc(0);
r8a7790_register_thermal();
r8a7790_register_i2c(0);
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index d47d8b1..35d7863 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -182,11 +182,6 @@
thermal_resources, \
ARRAY_SIZE(thermal_resources))
-void __init r8a7791_add_dt_devices(void)
-{
- r8a7791_register_cmt(0);
-}
-
void __init r8a7791_add_standard_devices(void)
{
r8a7791_register_scif(0);
@@ -204,7 +199,7 @@
r8a7791_register_scif(12);
r8a7791_register_scif(13);
r8a7791_register_scif(14);
- r8a7791_add_dt_devices();
+ r8a7791_register_cmt(0);
r8a7791_register_irqc(0);
r8a7791_register_thermal();
}
diff --git a/arch/arm/mach-shmobile/setup-r8a7794.c b/arch/arm/mach-shmobile/setup-r8a7794.c
new file mode 100644
index 0000000..c10acd1
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7794.c
@@ -0,0 +1,32 @@
+/*
+ * r8a7794 processor support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+#include "common.h"
+#include "rcar-gen2.h"
+#include <asm/mach/arch.h>
+
+static const char * const r8a7794_boards_compat_dt[] __initconst = {
+ "renesas,r8a7794",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7794_DT, "Generic R8A7794 (Flattened Device Tree)")
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
+ .init_time = rcar_gen2_timer_init,
+ .dt_compat = r8a7794_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 9cdfcdf..ea63fbe 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -41,6 +41,7 @@
#include "common.h"
#include "dma-register.h"
+#include "intc.h"
#include "irqs.h"
#include "pm-rmobile.h"
#include "sh7372.h"
@@ -984,7 +985,7 @@
void __init sh7372_add_early_devices_dt(void)
{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
+ shmobile_init_delay();
sh7372_add_early_devices();
}
@@ -1008,7 +1009,6 @@
DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
.map_io = sh7372_map_io,
.init_early = sh7372_add_early_devices_dt,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 2c802ae..b7bd8e5 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -40,6 +40,7 @@
#include "common.h"
#include "dma-register.h"
+#include "intc.h"
#include "irqs.h"
#include "sh73a0.h"
@@ -696,10 +697,6 @@
},
};
-static struct platform_device *sh73a0_devices_dt[] __initdata = {
- &cmt1_device,
-};
-
static struct platform_device *sh73a0_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
@@ -712,6 +709,7 @@
&scif8_device,
&tmu0_device,
&ipmmu_device,
+ &cmt1_device,
};
static struct platform_device *sh73a0_late_devices[] __initdata = {
@@ -736,8 +734,6 @@
/* Clear software reset bit on SY-DMAC module */
__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
- platform_add_devices(sh73a0_devices_dt,
- ARRAY_SIZE(sh73a0_devices_dt));
platform_add_devices(sh73a0_early_devices,
ARRAY_SIZE(sh73a0_early_devices));
platform_add_devices(sh73a0_late_devices,
@@ -746,7 +742,7 @@
void __init sh73a0_init_delay(void)
{
- shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
+ shmobile_init_delay();
}
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
@@ -762,8 +758,6 @@
void __init sh73a0_add_early_devices(void)
{
- early_platform_add_devices(sh73a0_devices_dt,
- ARRAY_SIZE(sh73a0_devices_dt));
early_platform_add_devices(sh73a0_early_devices,
ARRAY_SIZE(sh73a0_early_devices));
@@ -775,17 +769,10 @@
void __init sh73a0_add_standard_devices_dt(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
-
/* clocks are setup late during boot in the case of DT */
sh73a0_clock_init();
- platform_add_devices(sh73a0_devices_dt,
- ARRAY_SIZE(sh73a0_devices_dt));
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- /* Instantiate cpufreq-cpu0 */
- platform_device_register_full(&devinfo);
}
static const char *sh73a0_boards_compat_dt[] __initdata = {
@@ -797,8 +784,8 @@
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
.init_machine = sh73a0_add_standard_devices_dt,
+ .init_late = shmobile_init_late,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 942efdc..87c6be1 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -23,8 +23,8 @@
#include <linux/delay.h>
#include <linux/of_address.h>
-void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
- unsigned int mult, unsigned int div)
+static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+ unsigned int mult, unsigned int div)
{
/* calculate a worst-case loops-per-jiffy value
* based on maximum cpu core hz setting and the
@@ -40,27 +40,10 @@
preset_lpj = max_cpu_core_hz / value;
}
-void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div)
-{
- /* calculate a worst-case loops-per-jiffy value
- * based on maximum cpu core mhz setting and the
- * __delay() implementation in arch/arm/lib/delay.S
- *
- * this will result in a longer delay than expected
- * when the cpu core runs on lower frequencies.
- */
-
- unsigned int value = (1000000 * mult) / (HZ * div);
-
- if (!preset_lpj)
- preset_lpj = max_cpu_core_mhz * value;
-}
-
void __init shmobile_init_delay(void)
{
struct device_node *np, *cpus;
- bool is_a8_a9 = false;
+ bool is_a7_a8_a9 = false;
bool is_a15 = false;
u32 max_freq = 0;
@@ -74,9 +57,10 @@
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
- if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ if (of_device_is_compatible(np, "arm,cortex-a7") ||
+ of_device_is_compatible(np, "arm,cortex-a8") ||
of_device_is_compatible(np, "arm,cortex-a9"))
- is_a8_a9 = true;
+ is_a7_a8_a9 = true;
else if (of_device_is_compatible(np, "arm,cortex-a15"))
is_a15 = true;
}
@@ -86,7 +70,7 @@
if (!max_freq)
return;
- if (is_a8_a9)
+ if (is_a7_a8_a9)
shmobile_setup_delay_hz(max_freq, 1, 3);
else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
shmobile_setup_delay_hz(max_freq, 2, 4);
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 2c2754e..f61158c 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -426,9 +426,15 @@
static int ve_init_opp_table(struct device *cpu_dev)
{
- int cluster = topology_physical_package_id(cpu_dev->id);
- int idx, ret = 0, max_opp = info->num_opps[cluster];
- struct ve_spc_opp *opps = info->opps[cluster];
+ int cluster;
+ int idx, ret = 0, max_opp;
+ struct ve_spc_opp *opps;
+
+ cluster = topology_physical_package_id(cpu_dev->id);
+ cluster = cluster < 0 ? 0 : cluster;
+
+ max_opp = info->num_opps[cluster];
+ opps = info->opps[cluster];
for (idx = 0; idx < max_opp; idx++, opps++) {
ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
@@ -537,6 +543,8 @@
spc->hw.init = &init;
spc->cluster = topology_physical_package_id(cpu_dev->id);
+ spc->cluster = spc->cluster < 0 ? 0 : spc->cluster;
+
init.name = dev_name(cpu_dev);
init.ops = &clk_spc_ops;
init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 3815a82..8c48c5c 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -17,12 +17,6 @@
*/
.align 5
ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
- sub r1, sp, #4 @ Get unused stack location
- strex r0, r1, [r1] @ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
- clrex
-#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
/*
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index 7033752..4812ad0 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -13,12 +13,6 @@
*/
.align 5
ENTRY(v7_early_abort)
- /*
- * The effect of data aborts on on the exclusive access monitor are
- * UNPREDICTABLE. Do a CLREX to clear the state
- */
- clrex
-
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5783354..2df5e5d 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -39,7 +39,7 @@
# The byte offset of the kernel image in RAM from the start of RAM.
ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
-TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%04x0\n", int(65535 * rand())}')
+TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%03x000\n", int(512 * rand())}')
else
TEXT_OFFSET := 0x00080000
endif
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 1e52b74..d92ef3c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -64,6 +64,8 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
+CONFIG_AHCI_XGENE=y
+CONFIG_PHY_XGENE=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
@@ -71,6 +73,7 @@
CONFIG_VIRTIO_NET=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
+CONFIG_NET_XGENE=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
index 1be62bc..74a9d30 100644
--- a/arch/arm64/include/asm/sparsemem.h
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -17,7 +17,7 @@
#define __ASM_SPARSEMEM_H
#ifdef CONFIG_SPARSEMEM
-#define MAX_PHYSMEM_BITS 40
+#define MAX_PHYSMEM_BITS 48
#define SECTION_SIZE_BITS 30
#endif
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 4bc95d2..6d2bf41 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -41,7 +41,7 @@
#define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2)
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5)
-#define __NR_compat_syscalls 383
+#define __NR_compat_syscalls 386
#endif
#define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index e242600..da1f06b 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -787,3 +787,8 @@
__SYSCALL(__NR_sched_getattr, sys_sched_getattr)
#define __NR_renameat2 382
__SYSCALL(__NR_renameat2, sys_renameat2)
+ /* 383 for seccomp */
+#define __NR_getrandom 384
+__SYSCALL(__NR_getrandom, sys_getrandom)
+#define __NR_memfd_create 385
+__SYSCALL(__NR_memfd_create, sys_memfd_create)
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index f798f66..1771696 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -49,7 +49,7 @@
if (l1ip != ICACHE_POLICY_PIPT)
set_bit(ICACHEF_ALIASING, &__icache_flags);
- if (l1ip == ICACHE_POLICY_AIVIVT);
+ if (l1ip == ICACHE_POLICY_AIVIVT)
set_bit(ICACHEF_AIVIVT, &__icache_flags);
pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu);
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index e72f310..03aaa99 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -188,6 +188,8 @@
if (uefi_debug)
pr_cont("\n");
}
+
+ set_bit(EFI_MEMMAP, &efi.flags);
}
@@ -463,6 +465,8 @@
efi_native_runtime_setup();
set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+ efi.runtime_version = efi.systab->hdr.revision;
+
return 0;
err_unmap:
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 144f105..bed0283 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -38,11 +38,11 @@
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
-#if (TEXT_OFFSET & 0xf) != 0
-#error TEXT_OFFSET must be at least 16B aligned
-#elif (PAGE_OFFSET & 0xfffff) != 0
+#if (TEXT_OFFSET & 0xfff) != 0
+#error TEXT_OFFSET must be at least 4KB aligned
+#elif (PAGE_OFFSET & 0x1fffff) != 0
#error PAGE_OFFSET must be at least 2MB aligned
-#elif TEXT_OFFSET > 0xfffff
+#elif TEXT_OFFSET > 0x1fffff
#error TEXT_OFFSET must be less than 2MB
#endif
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 0310811..70526cf 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1115,19 +1115,15 @@
if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
trace_sys_enter(regs, regs->syscallno);
-#ifdef CONFIG_AUDITSYSCALL
audit_syscall_entry(syscall_get_arch(), regs->syscallno,
regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]);
-#endif
return regs->syscallno;
}
asmlinkage void syscall_trace_exit(struct pt_regs *regs)
{
-#ifdef CONFIG_AUDITSYSCALL
audit_syscall_exit(regs);
-#endif
if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
trace_sys_exit(regs, regs_return_value(regs));
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5b4526e..5472c24 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -32,6 +32,7 @@
#include <linux/of_fdt.h>
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
+#include <linux/efi.h>
#include <asm/fixmap.h>
#include <asm/sections.h>
@@ -148,7 +149,8 @@
memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
#endif
- early_init_fdt_scan_reserved_mem();
+ if (!efi_enabled(EFI_MEMMAP))
+ early_init_fdt_scan_reserved_mem();
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA))
diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h
index a34f309..6554e78 100644
--- a/arch/frv/include/asm/processor.h
+++ b/arch/frv/include/asm/processor.h
@@ -129,7 +129,8 @@
#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc)
#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp)
-#define cpu_relax() barrier()
+#define cpu_relax() barrier()
+#define cpu_relax_lowlatency() cpu_relax()
/* data cache prefetch */
#define ARCH_HAS_PREFETCH
diff --git a/arch/hexagon/mm/cache.c b/arch/hexagon/mm/cache.c
index fe14ccf..0c76c80 100644
--- a/arch/hexagon/mm/cache.c
+++ b/arch/hexagon/mm/cache.c
@@ -68,6 +68,7 @@
);
local_irq_restore(flags);
}
+EXPORT_SYMBOL(flush_icache_range);
void hexagon_clean_dcache_range(unsigned long start, unsigned long end)
{
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 64aefb7..c84c88b 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -549,8 +549,6 @@
config KEXEC
bool "kexec system call"
depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 4254f5d..10a14ea 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -11,7 +11,7 @@
-#define NR_syscalls 316 /* length of syscall table */
+#define NR_syscalls 317 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h
index 99801c3..6a65bb7 100644
--- a/arch/ia64/include/uapi/asm/unistd.h
+++ b/arch/ia64/include/uapi/asm/unistd.h
@@ -329,5 +329,6 @@
#define __NR_sched_getattr 1337
#define __NR_renameat2 1338
#define __NR_getrandom 1339
+#define __NR_memfd_create 1339
#endif /* _UAPI_ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 4c13837..01edf24 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1777,6 +1777,7 @@
data8 sys_sched_getattr
data8 sys_renameat2
data8 sys_getrandom
+ data8 sys_memfd_create // 1340
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 3ff8c9a..87b7c75 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -91,8 +91,6 @@
config KEXEC
bool "kexec system call"
depends on M68KCLASSIC
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h
index 4e1ddc9..1c2380b 100644
--- a/arch/microblaze/include/uapi/asm/unistd.h
+++ b/arch/microblaze/include/uapi/asm/unistd.h
@@ -399,5 +399,8 @@
#define __NR_sched_setattr 381
#define __NR_sched_getattr 382
#define __NR_renameat2 383
+#define __NR_seccomp 384
+#define __NR_getrandom 385
+#define __NR_memfd_create 386
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 1a23d5d..de59ee1 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -384,3 +384,6 @@
.long sys_sched_setattr
.long sys_sched_getattr
.long sys_renameat2
+ .long sys_seccomp
+ .long sys_getrandom /* 385 */
+ .long sys_memfd_create
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index df51e78..900c7e5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2396,8 +2396,6 @@
config KEXEC
bool "Kexec system call"
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 7761889..8c13675 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -847,6 +847,7 @@
pr_warn("DB1200: cant get I2C close to 50MHz\n");
else
clk_set_rate(c, pfc);
+ clk_prepare_enable(c);
clk_put(c);
}
@@ -922,11 +923,6 @@
}
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
- c = clk_get(NULL, "psc1_intclk");
- if (!IS_ERR(c)) {
- clk_prepare_enable(c);
- clk_put(c);
- }
__raw_writel(PSC_SEL_CLK_SERCLK,
(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 2b63e7e..ad439c2 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -59,12 +59,21 @@
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3);
+ if (bcm47xx_bus.ssb.chip_id == 0x4785)
+ write_c0_diag4(1 << 22);
+ ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ if (bcm47xx_bus.ssb.chip_id == 0x4785) {
+ __asm__ __volatile__(
+ ".set\tmips3\n\t"
+ "sync\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+ }
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
- bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3);
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
break;
#endif
}
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 008e9c8..38f4c32 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -263,7 +263,6 @@
static int octeon_uart;
extern asmlinkage void handle_int(void);
-extern asmlinkage void plat_irq_dispatch(void);
/**
* Return non zero if we are currently running in the Octeon simulator
@@ -458,6 +457,18 @@
octeon_kill_core(NULL);
}
+static char __read_mostly octeon_system_type[80];
+
+static int __init init_octeon_system_type(void)
+{
+ snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
+ cvmx_board_type_to_string(octeon_bootinfo->board_type),
+ octeon_model_get_string(read_c0_prid()));
+
+ return 0;
+}
+early_initcall(init_octeon_system_type);
+
/**
* Return a string representing the system type
*
@@ -465,11 +476,7 @@
*/
const char *octeon_board_type_string(void)
{
- static char name[80];
- sprintf(name, "%s (%s)",
- cvmx_board_type_to_string(octeon_bootinfo->board_type),
- octeon_model_get_string(read_c0_prid()));
- return name;
+ return octeon_system_type;
}
const char *get_system_type(void)
diff --git a/arch/mips/include/asm/eva.h b/arch/mips/include/asm/eva.h
new file mode 100644
index 0000000..a3d1807
--- /dev/null
+++ b/arch/mips/include/asm/eva.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ *
+ * EVA functions for generic code
+ */
+
+#ifndef _ASM_EVA_H
+#define _ASM_EVA_H
+
+#include <kernel-entry-init.h>
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EVA
+
+/*
+ * EVA early init code
+ *
+ * Platforms must define their own 'platform_eva_init' macro in
+ * their kernel-entry-init.h header. This macro usually does the
+ * platform specific configuration of the segmentation registers,
+ * and it is normally called from assembly code.
+ *
+ */
+
+.macro eva_init
+platform_eva_init
+.endm
+
+#else
+
+.macro eva_init
+.endm
+
+#endif /* CONFIG_EVA */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 3f20b21..d7699cf 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -49,7 +49,7 @@
#endif
#define GICBIS(reg, mask, bits) \
do { u32 data; \
- GICREAD((reg), data); \
+ GICREAD(reg, data); \
data &= ~(mask); \
data |= ((bits) & (mask)); \
GICWRITE((reg), data); \
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index ae1f7b2..39f07ae 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -26,6 +26,8 @@
#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */
#endif
+asmlinkage void plat_irq_dispatch(void);
+
extern void do_IRQ(unsigned int irq);
extern void arch_init_irq(void);
diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
index 77eeda7..0cf8622 100644
--- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@@ -10,14 +10,15 @@
#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
/*
* Prepare segments for EVA boot:
*
* This is in case the processor boots in legacy configuration
* (SI_EVAReset is de-asserted and CONFIG5.K == 0)
*
- * On entry, t1 is loaded with CP0_CONFIG
- *
* ========================= Mappings =============================
* Virtual memory Physical memory Mapping
* 0x00000000 - 0x7fffffff 0x80000000 - 0xfffffffff MUSUK (kuseg)
@@ -30,12 +31,20 @@
*
*
* Lowmem is expanded to 2GB
+ *
+ * The following code uses the t0, t1, t2 and ra registers without
+ * previously preserving them.
+ *
*/
- .macro eva_entry
+ .macro platform_eva_init
+
+ .set push
+ .set reorder
/*
* Get Config.K0 value and use it to program
* the segmentation registers
*/
+ mfc0 t1, CP0_CONFIG
andi t1, 0x7 /* CCA */
move t2, t1
ins t2, t1, 16, 3
@@ -77,6 +86,8 @@
mtc0 t0, $16, 5
sync
jal mips_ihb
+
+ .set pop
.endm
.macro kernel_entry_setup
@@ -95,7 +106,7 @@
sll t0, t0, 6 /* SC bit */
bgez t0, 9f
- eva_entry
+ platform_eva_init
b 0f
9:
/* Assume we came from YAMON... */
@@ -127,8 +138,7 @@
#ifdef CONFIG_EVA
sync
ehb
- mfc0 t1, CP0_CONFIG
- eva_entry
+ platform_eva_init
#endif
.endm
diff --git a/arch/mips/include/asm/mach-netlogic/topology.h b/arch/mips/include/asm/mach-netlogic/topology.h
index ceeb1f5..0eb43c8 100644
--- a/arch/mips/include/asm/mach-netlogic/topology.h
+++ b/arch/mips/include/asm/mach-netlogic/topology.h
@@ -10,13 +10,6 @@
#include <asm/mach-netlogic/multi-node.h>
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu) cpu_to_node(cpu)
-#define topology_core_id(cpu) (cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
-#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu])
-#define topology_core_cpumask(cpu) cpumask_of_node(cpu_to_node(cpu))
-#endif
-
#include <asm-generic/topology.h>
#endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 027c74d..df49a30 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -122,6 +122,9 @@
} \
} while(0)
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+ pte_t pteval);
+
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
@@ -145,7 +148,6 @@
}
}
}
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -183,7 +185,6 @@
}
#endif
}
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -390,15 +391,12 @@
extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
pte_t pte);
-extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
pte_t pte = *ptep;
__update_tlb(vma, address, pte);
- __update_cache(vma, address, pte);
}
static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index 17960fe..cdf68b3 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -131,10 +131,12 @@
{
int arch = EM_MIPS;
#ifdef CONFIG_64BIT
- if (!test_thread_flag(TIF_32BIT_REGS))
+ if (!test_thread_flag(TIF_32BIT_REGS)) {
arch |= __AUDIT_ARCH_64BIT;
- if (test_thread_flag(TIF_32BIT_ADDR))
- arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+ /* N32 sets only TIF_32BIT_ADDR */
+ if (test_thread_flag(TIF_32BIT_ADDR))
+ arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+ }
#endif
#if defined(__LITTLE_ENDIAN)
arch |= __AUDIT_ARCH_LE;
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 6f4f739..e6e97d2 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -13,6 +13,7 @@
#include <asm/asm-offsets.h>
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
+#include <asm/eva.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/pm.h>
@@ -166,6 +167,9 @@
1: jal mips_cps_core_init
nop
+ /* Do any EVA initialization if necessary */
+ eva_init
+
/*
* Boot any other VPEs within this core that should be online, and
* deactivate this VPE if it should be offline.
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 14bf74b..b63f248 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -558,7 +558,7 @@
if (mipspmu.irq >= 0) {
/* Request my own irq handler. */
err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
- IRQF_PERCPU | IRQF_NOBALANCING,
+ IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_THREAD,
"mips_perf_pmu", NULL);
if (err) {
pr_warning("Unable to request IRQ%d for MIPS "
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 13b964f..25bb840 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -113,15 +113,19 @@
move s0, t2 # Save syscall pointer
move a0, sp
/*
- * syscall number is in v0 unless we called syscall(__NR_###)
+ * absolute syscall number is in v0 unless we called syscall(__NR_###)
* where the real syscall number is in a0
* note: NR_syscall is the first O32 syscall but the macro is
* only defined when compiling with -mabi=32 (CONFIG_32BIT)
* therefore __NR_O32_Linux is used (4000)
*/
- addiu a1, v0, __NR_O32_Linux
- bnez v0, 1f /* __NR_syscall at offset 0 */
- lw a1, PT_R4(sp)
+ .set push
+ .set reorder
+ subu t1, v0, __NR_O32_Linux
+ move a1, v0
+ bnez t1, 1f /* __NR_syscall at offset 0 */
+ lw a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
+ .set pop
1: jal syscall_trace_enter
diff --git a/arch/mips/loongson/loongson-3/cop2-ex.c b/arch/mips/loongson/loongson-3/cop2-ex.c
index 9182e8d..b03e37d 100644
--- a/arch/mips/loongson/loongson-3/cop2-ex.c
+++ b/arch/mips/loongson/loongson-3/cop2-ex.c
@@ -22,13 +22,13 @@
static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
void *data)
{
- int fpu_enabled;
+ int fpu_owned;
int fr = !test_thread_flag(TIF_32BIT_FPREGS);
switch (action) {
case CU2_EXCEPTION:
preempt_disable();
- fpu_enabled = read_c0_status() & ST0_CU1;
+ fpu_owned = __is_fpu_owner();
if (!fr)
set_c0_status(ST0_CU1 | ST0_CU2);
else
@@ -39,8 +39,8 @@
KSTK_STATUS(current) |= ST0_FR;
else
KSTK_STATUS(current) &= ~ST0_FR;
- /* If FPU is enabled, we needn't init or restore fp */
- if(!fpu_enabled) {
+ /* If FPU is owned, we needn't init or restore fp */
+ if (!fpu_owned) {
set_thread_flag(TIF_USEDFPU);
if (!used_math()) {
_init_fpu();
diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c
index ca025a6..37ed184 100644
--- a/arch/mips/loongson/loongson-3/numa.c
+++ b/arch/mips/loongson/loongson-3/numa.c
@@ -24,8 +24,6 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
-#include <linux/bootmem.h>
-#include <linux/init.h>
#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/mc146818-time.h>
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index f7b91d3..7e3ea77 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -119,25 +119,36 @@
EXPORT_SYMBOL(__flush_anon_page);
-void __update_cache(struct vm_area_struct *vma, unsigned long address,
- pte_t pte)
+static void mips_flush_dcache_from_pte(pte_t pteval, unsigned long address)
{
struct page *page;
- unsigned long pfn, addr;
- int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc;
+ unsigned long pfn = pte_pfn(pteval);
- pfn = pte_pfn(pte);
if (unlikely(!pfn_valid(pfn)))
return;
+
page = pfn_to_page(pfn);
if (page_mapping(page) && Page_dcache_dirty(page)) {
- addr = (unsigned long) page_address(page);
- if (exec || pages_do_alias(addr, address & PAGE_MASK))
- flush_data_cache_page(addr);
+ unsigned long page_addr = (unsigned long) page_address(page);
+
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias(page_addr, address & PAGE_MASK))
+ flush_data_cache_page(page_addr);
ClearPageDcacheDirty(page);
}
}
+void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval)
+{
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
+ if (pte_present(pteval))
+ mips_flush_dcache_from_pte(pteval, addr);
+ }
+
+ set_pte(ptep, pteval);
+}
+
unsigned long _page_cachable_default;
EXPORT_SYMBOL(_page_cachable_default);
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index 0c35dee0..8fddd2cd 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -35,13 +35,19 @@
/* otherwise look in the environment */
memsize_str = fw_getenv("memsize");
- if (memsize_str)
- tmp = kstrtol(memsize_str, 0, &memsize);
+ if (memsize_str) {
+ tmp = kstrtoul(memsize_str, 0, &memsize);
+ if (tmp)
+ pr_warn("Failed to read the 'memsize' env variable.\n");
+ }
if (eva) {
/* Look for ememsize for EVA */
ememsize_str = fw_getenv("ememsize");
- if (ememsize_str)
- tmp = kstrtol(ememsize_str, 0, &ememsize);
+ if (ememsize_str) {
+ tmp = kstrtoul(ememsize_str, 0, &ememsize);
+ if (tmp)
+ pr_warn("Failed to read the 'ememsize' env variable.\n");
+ }
}
if (!memsize && !ememsize) {
pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
index 941744a..f914c75 100644
--- a/arch/mips/pmcs-msp71xx/msp_irq.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq.c
@@ -51,7 +51,7 @@
* the range 40-71.
*/
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(void)
{
u32 pending;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a577609f..4bc7b62 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -399,8 +399,6 @@
config KEXEC
bool "kexec system call"
depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 329d7fd..b9615ba 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -101,7 +101,7 @@
ri = kmalloc(sizeof(struct kvm_rma_info), GFP_KERNEL);
if (!ri)
return NULL;
- page = cma_alloc(kvm_cma, kvm_rma_pages, get_order(kvm_rma_pages));
+ page = cma_alloc(kvm_cma, kvm_rma_pages, order_base_2(kvm_rma_pages));
if (!page)
goto err_out;
atomic_set(&ri->use_count, 1);
@@ -135,12 +135,12 @@
{
unsigned long align_pages = HPT_ALIGN_PAGES;
- VM_BUG_ON(get_order(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
+ VM_BUG_ON(order_base_2(nr_pages) < KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
/* Old CPUs require HPT aligned on a multiple of its size */
if (!cpu_has_feature(CPU_FTR_ARCH_206))
align_pages = nr_pages;
- return cma_alloc(kvm_cma, nr_pages, get_order(align_pages));
+ return cma_alloc(kvm_cma, nr_pages, order_base_2(align_pages));
}
EXPORT_SYMBOL_GPL(kvm_alloc_hpt);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index ab39ceb8..05c78bb 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -48,8 +48,6 @@
config KEXEC
def_bool y
- select CRYPTO
- select CRYPTO_SHA256
config AUDIT_ARCH
def_bool y
diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h
index 3802d2d..940ac49 100644
--- a/arch/s390/include/uapi/asm/unistd.h
+++ b/arch/s390/include/uapi/asm/unistd.h
@@ -283,7 +283,10 @@
#define __NR_sched_setattr 345
#define __NR_sched_getattr 346
#define __NR_renameat2 347
-#define NR_syscalls 348
+#define __NR_seccomp 348
+#define __NR_getrandom 349
+#define __NR_memfd_create 350
+#define NR_syscalls 351
/*
* There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c
index 45cdb37..faf6caa 100644
--- a/arch/s390/kernel/compat_wrapper.c
+++ b/arch/s390/kernel/compat_wrapper.c
@@ -214,3 +214,6 @@
COMPAT_SYSCALL_WRAP3(sched_setattr, pid_t, pid, struct sched_attr __user *, attr, unsigned int, flags);
COMPAT_SYSCALL_WRAP4(sched_getattr, pid_t, pid, struct sched_attr __user *, attr, unsigned int, size, unsigned int, flags);
COMPAT_SYSCALL_WRAP5(renameat2, int, olddfd, const char __user *, oldname, int, newdfd, const char __user *, newname, unsigned int, flags);
+COMPAT_SYSCALL_WRAP3(seccomp, unsigned int, op, unsigned int, flags, const char __user *, uargs)
+COMPAT_SYSCALL_WRAP3(getrandom, char __user *, buf, size_t, count, unsigned int, flags)
+COMPAT_SYSCALL_WRAP2(memfd_create, const char __user *, uname, unsigned int, flags)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 633ca75..22aac58 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2060,6 +2060,13 @@
S390_lowcore.program_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+ /*
+ * Clear subchannel ID and number to signal new kernel that no CCW or
+ * SCSI IPL has been done (for kexec and kdump)
+ */
+ S390_lowcore.subchannel_id = 0;
+ S390_lowcore.subchannel_nr = 0;
+
/* Store status at absolute zero */
store_status();
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ae1d5be..82bc113 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -24,6 +24,7 @@
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
+#include <linux/random.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/ioport.h>
@@ -61,6 +62,7 @@
#include <asm/diag.h>
#include <asm/os_info.h>
#include <asm/sclp.h>
+#include <asm/sysinfo.h>
#include "entry.h"
/*
@@ -766,6 +768,7 @@
#endif
get_cpu_id(&cpu_id);
+ add_device_randomness(&cpu_id, sizeof(cpu_id));
switch (cpu_id.machine) {
case 0x9672:
#if !defined(CONFIG_64BIT)
@@ -804,6 +807,19 @@
}
/*
+ * Add system information as device randomness
+ */
+static void __init setup_randomness(void)
+{
+ struct sysinfo_3_2_2 *vmms;
+
+ vmms = (struct sysinfo_3_2_2 *) alloc_page(GFP_KERNEL);
+ if (vmms && stsi(vmms, 3, 2, 2) == 0 && vmms->count)
+ add_device_randomness(&vmms, vmms->count);
+ free_page((unsigned long) vmms);
+}
+
+/*
* Setup function called from init/main.c just after the banner
* was printed.
*/
@@ -901,6 +917,9 @@
/* Setup zfcpdump support */
setup_zfcpdump();
+
+ /* Add system specific data to the random pool */
+ setup_randomness();
}
#ifdef CONFIG_32BIT
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index fe5cdf2..6fe886a 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -356,3 +356,6 @@
SYSCALL(sys_sched_setattr,sys_sched_setattr,compat_sys_sched_setattr) /* 345 */
SYSCALL(sys_sched_getattr,sys_sched_getattr,compat_sys_sched_getattr)
SYSCALL(sys_renameat2,sys_renameat2,compat_sys_renameat2)
+SYSCALL(sys_seccomp,sys_seccomp,compat_sys_seccomp)
+SYSCALL(sys_getrandom,sys_getrandom,compat_sys_getrandom)
+SYSCALL(sys_memfd_create,sys_memfd_create,compat_sys_memfd_create) /* 350 */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 453fa5c..244fb4c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -172,6 +172,7 @@
#
config CPU_SH2
bool
+ select SH_INTC
config CPU_SH2A
bool
@@ -182,6 +183,7 @@
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
+ select SH_INTC
select SYS_SUPPORTS_SH_TMU
config CPU_SH4
@@ -189,6 +191,7 @@
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
+ select SH_INTC
select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
@@ -595,8 +598,6 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on SUPERH32 && MMU
- select CRYPTO
- select CRYPTO_SHA256
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 097c2cd..f770e39 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -229,6 +229,7 @@
cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
}
+EXPORT_SYMBOL(flush_icache_range);
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index a3ffe2d..7fcd492 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -191,8 +191,6 @@
config KEXEC
bool "kexec system call"
- select CRYPTO
- select CRYPTO_SHA256
---help---
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index 01e8ab2..19eaa62 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -183,6 +183,7 @@
preempt_enable();
}
}
+EXPORT_SYMBOL(flush_icache_range);
/* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
index 780d773..7c8fb70 100644
--- a/arch/unicore32/kernel/signal.c
+++ b/arch/unicore32/kernel/signal.c
@@ -254,7 +254,8 @@
err |= setup_sigframe(frame, regs, set);
if (err == 0)
- err |= setup_return(regs, &ksig->ka, frame->retcode, frame, usig);
+ err |= setup_return(regs, &ksig->ka, frame->retcode, frame,
+ ksig->sig);
return err;
}
@@ -276,7 +277,8 @@
err |= __save_altstack(&frame->sig.uc.uc_stack, regs->UCreg_sp);
err |= setup_sigframe(&frame->sig, regs, set);
if (err == 0)
- err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame, usig);
+ err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame,
+ ksig->sig);
if (err == 0) {
/*
@@ -303,7 +305,6 @@
int syscall)
{
struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = current;
sigset_t *oldset = sigmask_to_save();
int usig = ksig->sig;
int ret;
@@ -373,7 +374,7 @@
if (!user_mode(regs))
return;
- if (get_signsl(&ksig)) {
+ if (get_signal(&ksig)) {
handle_signal(&ksig, regs, syscall);
return;
}
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 61b6d51..3942f74 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -17,6 +17,4 @@
obj-y += platform/
obj-y += net/
-ifeq ($(CONFIG_X86_64),y)
-obj-$(CONFIG_KEXEC) += purgatory/
-endif
+obj-$(CONFIG_KEXEC_FILE) += purgatory/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5d0bf1a..778178f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1585,9 +1585,6 @@
config KEXEC
bool "kexec system call"
- select BUILD_BIN2C
- select CRYPTO
- select CRYPTO_SHA256
---help---
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -1602,9 +1599,22 @@
interface is strongly in flux, so no good recommendation can be
made.
+config KEXEC_FILE
+ bool "kexec file based system call"
+ select BUILD_BIN2C
+ depends on KEXEC
+ depends on X86_64
+ depends on CRYPTO=y
+ depends on CRYPTO_SHA256=y
+ ---help---
+ This is new version of kexec system call. This system call is
+ file based and takes file descriptors as system call argument
+ for kernel and initramfs as opposed to list of segments as
+ accepted by previous system call.
+
config KEXEC_VERIFY_SIG
bool "Verify kernel signature during kexec_file_load() syscall"
- depends on KEXEC
+ depends on KEXEC_FILE
---help---
This option makes kernel signature verification mandatory for
kexec_file_load() syscall. If kernel is signature can not be
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index c1aa368..60087ca 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -184,11 +184,8 @@
$(Q)$(MAKE) $(build)=arch/x86/syscalls all
archprepare:
-ifeq ($(CONFIG_KEXEC),y)
-# Build only for 64bit. No loaders for 32bit yet.
- ifeq ($(CONFIG_X86_64),y)
+ifeq ($(CONFIG_KEXEC_FILE),y)
$(Q)$(MAKE) $(build)=arch/x86/purgatory arch/x86/purgatory/kexec-purgatory.c
- endif
endif
###
@@ -254,6 +251,7 @@
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=arch/x86/tools
+ $(Q)$(MAKE) $(clean)=arch/x86/purgatory
PHONY += kvmconfig
kvmconfig:
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 0aeed5c..478c490 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -227,6 +227,8 @@
extern void io_apic_eoi(unsigned int apic, unsigned int vector);
+extern bool mp_should_keep_irq(struct device *dev);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 5724601..7c492ed 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -95,7 +95,7 @@
#define KVM_REFILL_PAGES 25
#define KVM_MAX_CPUID_ENTRIES 80
#define KVM_NR_FIXED_MTRR_REGION 88
-#define KVM_NR_VAR_MTRR 10
+#define KVM_NR_VAR_MTRR 8
#define ASYNC_PF_PER_VCPU 64
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0ec0560..aa97a07 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -131,8 +131,13 @@
static inline int pte_special(pte_t pte)
{
- return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
- (_PAGE_PRESENT|_PAGE_SPECIAL);
+ /*
+ * See CONFIG_NUMA_BALANCING pte_numa in include/asm-generic/pgtable.h.
+ * On x86 we have _PAGE_BIT_NUMA == _PAGE_BIT_GLOBAL+1 ==
+ * __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+ */
+ return (pte_flags(pte) & _PAGE_SPECIAL) &&
+ (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
}
static inline unsigned long pte_pfn(pte_t pte)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index b5ea75c..ada2e2d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -71,6 +71,7 @@
obj-$(CONFIG_X86_TSC) += trace_clock.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
+obj-$(CONFIG_KEXEC_FILE) += kexec-bzimage64.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-y += kprobes/
obj-$(CONFIG_MODULES) += module.o
@@ -118,5 +119,4 @@
obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o
obj-y += vsmp_64.o
- obj-$(CONFIG_KEXEC) += kexec-bzimage64.o
endif
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 29290f5..337ce5a 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1070,6 +1070,11 @@
}
if (flags & IOAPIC_MAP_ALLOC) {
+ /* special handling for legacy IRQs */
+ if (irq < nr_legacy_irqs() && info->count == 1 &&
+ mp_irqdomain_map(domain, irq, pin) != 0)
+ irq = -1;
+
if (irq > 0)
info->count++;
else if (info->count == 0)
@@ -3896,7 +3901,15 @@
info->polarity = 1;
}
info->node = NUMA_NO_NODE;
- info->set = 1;
+
+ /*
+ * setup_IO_APIC_irqs() programs all legacy IRQs with default
+ * trigger and polarity attributes. Don't set the flag for that
+ * case so the first legacy IRQ user could reprogram the pin
+ * with real trigger and polarity attributes.
+ */
+ if (virq >= nr_legacy_irqs() || info->count)
+ info->set = 1;
}
set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger,
info->polarity);
@@ -3946,6 +3959,18 @@
return ret;
}
+bool mp_should_keep_irq(struct device *dev)
+{
+ if (dev->power.is_prepared)
+ return true;
+#ifdef CONFIG_PM_RUNTIME
+ if (dev->power.runtime_status == RPM_SUSPENDING)
+ return true;
+#endif
+
+ return false;
+}
+
/* Enable IOAPIC early just for system timer */
void __init pre_init_apic_IRQ0(void)
{
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 0553a34..a618fcd 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -182,8 +182,7 @@
crash_save_cpu(regs, safe_smp_processor_id());
}
-#ifdef CONFIG_X86_64
-
+#ifdef CONFIG_KEXEC_FILE
static int get_nr_ram_ranges_callback(unsigned long start_pfn,
unsigned long nr_pfn, void *arg)
{
@@ -696,5 +695,4 @@
return ret;
}
-
-#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_KEXEC_FILE */
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 47c410d..4b0e1df 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -683,7 +683,7 @@
sysenter_badsys:
movl $-ENOSYS,%eax
jmp sysenter_after_call
-END(syscall_badsys)
+END(sysenter_badsys)
CFI_ENDPROC
.macro FIXUP_ESPFIX_STACK
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 1e6cff5..44f1ed4 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -203,7 +203,7 @@
set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
}
- if (!acpi_ioapic && !of_ioapic)
+ if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
setup_irq(2, &irq2);
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 8b04018..4859810 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -25,9 +25,11 @@
#include <asm/debugreg.h>
#include <asm/kexec-bzimage64.h>
+#ifdef CONFIG_KEXEC_FILE
static struct kexec_file_ops *kexec_file_loaders[] = {
&kexec_bzImage64_ops,
};
+#endif
static void free_transition_pgtable(struct kimage *image)
{
@@ -178,6 +180,7 @@
);
}
+#ifdef CONFIG_KEXEC_FILE
/* Update purgatory as needed after various image segments have been prepared */
static int arch_update_purgatory(struct kimage *image)
{
@@ -209,6 +212,12 @@
return ret;
}
+#else /* !CONFIG_KEXEC_FILE */
+static inline int arch_update_purgatory(struct kimage *image)
+{
+ return 0;
+}
+#endif /* CONFIG_KEXEC_FILE */
int machine_kexec_prepare(struct kimage *image)
{
@@ -329,6 +338,7 @@
/* arch-dependent functionality related to kexec file-based syscall */
+#ifdef CONFIG_KEXEC_FILE
int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
unsigned long buf_len)
{
@@ -522,3 +532,4 @@
(int)ELF64_R_TYPE(rel[i].r_info), value);
return -ENOEXEC;
}
+#endif /* CONFIG_KEXEC_FILE */
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index bf7ef5c..0fa2960 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -68,6 +68,8 @@
void __init setup_default_timer_irq(void)
{
+ if (!nr_legacy_irqs())
+ return;
setup_irq(0, &irq0);
}
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 56657b0..03954f7 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1491,9 +1491,6 @@
goto exception;
break;
case VCPU_SREG_CS:
- if (in_task_switch && rpl != dpl)
- goto exception;
-
if (!(seg_desc.type & 8))
goto exception;
@@ -4394,8 +4391,11 @@
ctxt->execute = opcode.u.execute;
+ if (unlikely(ctxt->ud) && likely(!(ctxt->d & EmulateOnUD)))
+ return EMULATION_FAILED;
+
if (unlikely(ctxt->d &
- (NotImpl|EmulateOnUD|Stack|Op3264|Sse|Mmx|Intercept|CheckPerm))) {
+ (NotImpl|Stack|Op3264|Sse|Mmx|Intercept|CheckPerm))) {
/*
* These are copied unconditionally here, and checked unconditionally
* in x86_emulate_insn.
@@ -4406,9 +4406,6 @@
if (ctxt->d & NotImpl)
return EMULATION_FAILED;
- if (!(ctxt->d & EmulateOnUD) && ctxt->ud)
- return EMULATION_FAILED;
-
if (mode == X86EMUL_MODE_PROT64 && (ctxt->d & Stack))
ctxt->op_bytes = 8;
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 1fe3398..ee61c36 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -49,7 +49,13 @@
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
load_cr3(swapper_pg_dir);
- trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+ /*
+ * This gets called in the idle path where RCU
+ * functions differently. Tracing normally
+ * uses RCU, so we have to call the tracepoint
+ * specially here.
+ */
+ trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
}
}
EXPORT_SYMBOL_GPL(leave_mm);
@@ -174,7 +180,7 @@
*
* This is in units of pages.
*/
-unsigned long tlb_single_page_flush_ceiling = 33;
+static unsigned long tlb_single_page_flush_ceiling __read_mostly = 33;
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 3865116..b9958c3 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -229,7 +229,7 @@
static void intel_mid_pci_irq_disable(struct pci_dev *dev)
{
- if (!dev->dev.power.is_prepared && dev->irq > 0)
+ if (!mp_should_keep_irq(&dev->dev) && dev->irq > 0)
mp_unmap_irq(dev->irq);
}
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index bc1a2c3..eb500c2 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1256,7 +1256,7 @@
static void pirq_disable_irq(struct pci_dev *dev)
{
- if (io_apic_assign_pci_irqs && !dev->dev.power.is_prepared &&
+ if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
dev->irq) {
mp_unmap_irq(dev->irq);
dev->irq = 0;
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 7fde9ee..899dd24 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -11,6 +11,7 @@
# sure how to relocate those. Like kexec-tools, use custom flags.
KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large
+KBUILD_CFLAGS += -m$(BITS)
$(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
$(call if_changed,ld)
@@ -24,7 +25,4 @@
$(call if_changed,bin2c)
-# No loaders for 32bits yet.
-ifeq ($(CONFIG_X86_64),y)
- obj-$(CONFIG_KEXEC) += kexec-purgatory.o
-endif
+obj-$(CONFIG_KEXEC_FILE) += kexec-purgatory.o
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 3a617af..49c6c3d 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -4,24 +4,23 @@
config XTENSA
def_bool y
select ARCH_WANT_FRAME_POINTERS
- select HAVE_IDE
- select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
- select VIRT_TO_BUS
- select GENERIC_IRQ_SHOW
- select GENERIC_SCHED_CLOCK
- select MODULES_USE_ELF_RELA
- select GENERIC_PCI_IOMAP
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_WANT_OPTIONAL_GPIOLIB
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
- select IRQ_DOMAIN
- select HAVE_OPROFILE
+ select COMMON_CLK
+ select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK
select HAVE_FUNCTION_TRACER
select HAVE_IRQ_TIME_ACCOUNTING
+ select HAVE_OPROFILE
select HAVE_PERF_EVENTS
- select COMMON_CLK
+ select IRQ_DOMAIN
+ select MODULES_USE_ELF_RELA
+ select VIRT_TO_BUS
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
@@ -62,7 +61,9 @@
def_bool y
config MMU
- def_bool n
+ bool
+ default n if !XTENSA_VARIANT_CUSTOM
+ default XTENSA_VARIANT_MMU if XTENSA_VARIANT_CUSTOM
config VARIANT_IRQ_SWITCH
def_bool n
@@ -102,8 +103,40 @@
select VARIANT_IRQ_SWITCH
select ARCH_REQUIRE_GPIOLIB
select XTENSA_CALIBRATE_CCOUNT
+
+config XTENSA_VARIANT_CUSTOM
+ bool "Custom Xtensa processor configuration"
+ select MAY_HAVE_SMP
+ select HAVE_XTENSA_GPIO32
+ help
+ Select this variant to use a custom Xtensa processor configuration.
+ You will be prompted for a processor variant CORENAME.
endchoice
+config XTENSA_VARIANT_CUSTOM_NAME
+ string "Xtensa Processor Custom Core Variant Name"
+ depends on XTENSA_VARIANT_CUSTOM
+ help
+ Provide the name of a custom Xtensa processor variant.
+ This CORENAME selects arch/xtensa/variant/CORENAME.
+ Dont forget you have to select MMU if you have one.
+
+config XTENSA_VARIANT_NAME
+ string
+ default "dc232b" if XTENSA_VARIANT_DC232B
+ default "dc233c" if XTENSA_VARIANT_DC233C
+ default "fsf" if XTENSA_VARIANT_FSF
+ default "s6000" if XTENSA_VARIANT_S6000
+ default XTENSA_VARIANT_CUSTOM_NAME if XTENSA_VARIANT_CUSTOM
+
+config XTENSA_VARIANT_MMU
+ bool "Core variant has a Full MMU (TLB, Pages, Protection, etc)"
+ depends on XTENSA_VARIANT_CUSTOM
+ default y
+ help
+ Build a Conventional Kernel with full MMU support,
+ ie: it supports a TLB with auto-loading, page protection.
+
config XTENSA_UNALIGNED_USER
bool "Unaligned memory access in use space"
help
@@ -156,13 +189,9 @@
Say N if you want to disable CPU hotplug.
-config MATH_EMULATION
- bool "Math emulation"
- help
- Can we use information of configuration file?
-
config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
bool "Initialize Xtensa MMU inside the Linux kernel code"
+ depends on MMU
default y
help
Earlier version initialized the MMU in the exception vector
@@ -192,6 +221,7 @@
config HIGHMEM
bool "High Memory Support"
+ depends on MMU
help
Linux can use the full amount of RAM in the system by
default. However, the default MMUv2 setup only maps the
@@ -208,6 +238,32 @@
If unsure, say Y.
+config FAST_SYSCALL_XTENSA
+ bool "Enable fast atomic syscalls"
+ default n
+ help
+ fast_syscall_xtensa is a syscall that can make atomic operations
+ on UP kernel when processor has no s32c1i support.
+
+ This syscall is deprecated. It may have issues when called with
+ invalid arguments. It is provided only for backwards compatibility.
+ Only enable it if your userspace software requires it.
+
+ If unsure, say N.
+
+config FAST_SYSCALL_SPILL_REGISTERS
+ bool "Enable spill registers syscall"
+ default n
+ help
+ fast_syscall_spill_registers is a syscall that spills all active
+ register windows of a calling userspace task onto its stack.
+
+ This syscall is deprecated. It may have issues when called with
+ invalid arguments. It is provided only for backwards compatibility.
+ Only enable it if your userspace software requires it.
+
+ If unsure, say N.
+
endmenu
config XTENSA_CALIBRATE_CCOUNT
@@ -250,12 +306,14 @@
config XTENSA_PLATFORM_XT2000
bool "XT2000"
+ select HAVE_IDE
help
XT2000 is the name of Tensilica's feature-rich emulation platform.
This hardware is capable of running a full Linux distribution.
config XTENSA_PLATFORM_S6105
bool "S6105"
+ select HAVE_IDE
select SERIAL_CONSOLE
select NO_IOPORT_MAP
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 81250ec..4725330 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -4,6 +4,7 @@
# for more details.
#
# Copyright (C) 2001 - 2005 Tensilica Inc.
+# Copyright (C) 2014 Cadence Design Systems Inc.
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
@@ -13,11 +14,7 @@
# Core configuration.
# (Use VAR=<xtensa_config> to use another default compiler.)
-variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf
-variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b
-variant-$(CONFIG_XTENSA_VARIANT_DC233C) := dc233c
-variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000
-variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom
+variant-y := $(patsubst "%",%,$(CONFIG_XTENSA_VARIANT_NAME))
VARIANT = $(variant-y)
export VARIANT
diff --git a/arch/xtensa/boot/dts/kc705.dts b/arch/xtensa/boot/dts/kc705.dts
index 742a347..c4d17a3 100644
--- a/arch/xtensa/boot/dts/kc705.dts
+++ b/arch/xtensa/boot/dts/kc705.dts
@@ -4,8 +4,11 @@
/ {
compatible = "cdns,xtensa-kc705";
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000";
+ };
memory@0 {
device_type = "memory";
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x38000000>;
};
};
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index f6000fe..721df12 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -66,7 +66,6 @@
CONFIG_MMU=y
# CONFIG_XTENSA_UNALIGNED_USER is not set
# CONFIG_PREEMPT is not set
-# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
#
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 1493c68..b966baf 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -146,7 +146,6 @@
# CONFIG_XTENSA_VARIANT_S6000 is not set
# CONFIG_XTENSA_UNALIGNED_USER is not set
# CONFIG_PREEMPT is not set
-# CONFIG_MATH_EMULATION is not set
CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_XTENSA_ISS_NETWORK=y
@@ -308,7 +307,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
+# CONFIG_HAVE_IDE is not set
# CONFIG_IDE is not set
#
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 12a492a..9471265 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -109,7 +109,6 @@
CONFIG_XTENSA_VARIANT_S6000=y
# CONFIG_XTENSA_UNALIGNED_USER is not set
CONFIG_PREEMPT=y
-# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 555a98a..e72aaca 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -37,6 +37,7 @@
* specials for cache aliasing:
*
* __flush_invalidate_dcache_page_alias(vaddr,paddr)
+ * __invalidate_dcache_page_alias(vaddr,paddr)
* __invalidate_icache_page_alias(vaddr,paddr)
*/
@@ -62,6 +63,7 @@
#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long);
+extern void __invalidate_dcache_page_alias(unsigned long, unsigned long);
#else
static inline void __flush_invalidate_dcache_page_alias(unsigned long virt,
unsigned long phys) { }
diff --git a/arch/xtensa/include/asm/fixmap.h b/arch/xtensa/include/asm/fixmap.h
index 9f6c33d0..62b507d 100644
--- a/arch/xtensa/include/asm/fixmap.h
+++ b/arch/xtensa/include/asm/fixmap.h
@@ -23,8 +23,8 @@
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
* compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of the consistent memory region backwards.
+ * in the boot process. We allocate these special addresses
+ * from the start of the consistent memory region upwards.
* Also this lets us do fail-safe vmalloc(), we
* can guarantee that these special addresses and
* vmalloc()-ed addresses never overlap.
@@ -38,7 +38,8 @@
#ifdef CONFIG_HIGHMEM
/* reserved pte's for temporary kernel mappings */
FIX_KMAP_BEGIN,
- FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1,
+ FIX_KMAP_END = FIX_KMAP_BEGIN +
+ (KM_TYPE_NR * NR_CPUS * DCACHE_N_COLORS) - 1,
#endif
__end_of_fixed_addresses
};
@@ -47,7 +48,28 @@
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START ((FIXADDR_TOP - FIXADDR_SIZE) & PMD_MASK)
-#include <asm-generic/fixmap.h>
+#define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without translation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif
#define kmap_get_fixmap_pte(vaddr) \
pte_offset_kernel( \
diff --git a/arch/xtensa/include/asm/highmem.h b/arch/xtensa/include/asm/highmem.h
index 2653ef5..2c7901e 100644
--- a/arch/xtensa/include/asm/highmem.h
+++ b/arch/xtensa/include/asm/highmem.h
@@ -12,19 +12,55 @@
#ifndef _XTENSA_HIGHMEM_H
#define _XTENSA_HIGHMEM_H
+#include <linux/wait.h>
#include <asm/cacheflush.h>
#include <asm/fixmap.h>
#include <asm/kmap_types.h>
#include <asm/pgtable.h>
-#define PKMAP_BASE (FIXADDR_START - PMD_SIZE)
-#define LAST_PKMAP PTRS_PER_PTE
+#define PKMAP_BASE ((FIXADDR_START - \
+ (LAST_PKMAP + 1) * PAGE_SIZE) & PMD_MASK)
+#define LAST_PKMAP (PTRS_PER_PTE * DCACHE_N_COLORS)
#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT)
#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
#define kmap_prot PAGE_KERNEL
+#if DCACHE_WAY_SIZE > PAGE_SIZE
+#define get_pkmap_color get_pkmap_color
+static inline int get_pkmap_color(struct page *page)
+{
+ return DCACHE_ALIAS(page_to_phys(page));
+}
+
+extern unsigned int last_pkmap_nr_arr[];
+
+static inline unsigned int get_next_pkmap_nr(unsigned int color)
+{
+ last_pkmap_nr_arr[color] =
+ (last_pkmap_nr_arr[color] + DCACHE_N_COLORS) & LAST_PKMAP_MASK;
+ return last_pkmap_nr_arr[color] + color;
+}
+
+static inline int no_more_pkmaps(unsigned int pkmap_nr, unsigned int color)
+{
+ return pkmap_nr < DCACHE_N_COLORS;
+}
+
+static inline int get_pkmap_entries_count(unsigned int color)
+{
+ return LAST_PKMAP / DCACHE_N_COLORS;
+}
+
+extern wait_queue_head_t pkmap_map_wait_arr[];
+
+static inline wait_queue_head_t *get_pkmap_wait_queue_head(unsigned int color)
+{
+ return pkmap_map_wait_arr + color;
+}
+#endif
+
extern pte_t *pkmap_page_table;
void *kmap_high(struct page *page);
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index 47f5823..abe24c6 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -78,7 +78,9 @@
# define DCACHE_ALIAS_EQ(a,b) ((((a) ^ (b)) & DCACHE_ALIAS_MASK) == 0)
#else
# define DCACHE_ALIAS_ORDER 0
+# define DCACHE_ALIAS(a) ((void)(a), 0)
#endif
+#define DCACHE_N_COLORS (1 << DCACHE_ALIAS_ORDER)
#if ICACHE_WAY_SIZE > PAGE_SIZE
# define ICACHE_ALIAS_ORDER (ICACHE_WAY_SHIFT - PAGE_SHIFT)
@@ -134,6 +136,7 @@
#endif
struct page;
+struct vm_area_struct;
extern void clear_page(void *page);
extern void copy_page(void *to, void *from);
@@ -143,8 +146,15 @@
*/
#if DCACHE_WAY_SIZE > PAGE_SIZE
-extern void clear_user_page(void*, unsigned long, struct page*);
-extern void copy_user_page(void*, void*, unsigned long, struct page*);
+extern void clear_page_alias(void *vaddr, unsigned long paddr);
+extern void copy_page_alias(void *to, void *from,
+ unsigned long to_paddr, unsigned long from_paddr);
+
+#define clear_user_highpage clear_user_highpage
+void clear_user_highpage(struct page *page, unsigned long vaddr);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr, struct vm_area_struct *vma);
#else
# define clear_user_page(page, vaddr, pg) clear_page(page)
# define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index 4b0ca35..b2173e5 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -67,7 +67,12 @@
#define VMALLOC_START 0xC0000000
#define VMALLOC_END 0xC7FEFFFF
#define TLBTEMP_BASE_1 0xC7FF0000
-#define TLBTEMP_BASE_2 0xC7FF8000
+#define TLBTEMP_BASE_2 (TLBTEMP_BASE_1 + DCACHE_WAY_SIZE)
+#if 2 * DCACHE_WAY_SIZE > ICACHE_WAY_SIZE
+#define TLBTEMP_SIZE (2 * DCACHE_WAY_SIZE)
+#else
+#define TLBTEMP_SIZE ICACHE_WAY_SIZE
+#endif
/*
* For the Xtensa architecture, the PTE layout is as follows:
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index fd686dc..c7211e7 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -52,7 +52,12 @@
*/
.macro get_fs ad, sp
GET_CURRENT(\ad,\sp)
+#if THREAD_CURRENT_DS > 1020
+ addi \ad, \ad, TASK_THREAD
+ l32i \ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
+#else
l32i \ad, \ad, THREAD_CURRENT_DS
+#endif
.endm
/*
diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h
index b4cb110..a47909f 100644
--- a/arch/xtensa/include/uapi/asm/ioctls.h
+++ b/arch/xtensa/include/uapi/asm/ioctls.h
@@ -28,17 +28,17 @@
#define TCSETSW 0x5403
#define TCSETSF 0x5404
-#define TCGETA _IOR('t', 23, struct termio)
-#define TCSETA _IOW('t', 24, struct termio)
-#define TCSETAW _IOW('t', 25, struct termio)
-#define TCSETAF _IOW('t', 28, struct termio)
+#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */
+#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */
+#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */
+#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */
#define TCSBRK _IO('t', 29)
#define TCXONC _IO('t', 30)
#define TCFLSH _IO('t', 31)
-#define TIOCSWINSZ _IOW('t', 103, struct winsize)
-#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */
#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
@@ -88,7 +88,6 @@
#define TIOCSETD _IOW('T', 35, int)
#define TIOCGETD _IOR('T', 36, int)
#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/
-#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/
#define TIOCSBRK _IO('T', 39) /* BSD compatibility */
#define TIOCCBRK _IO('T', 40) /* BSD compatibility */
#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/
@@ -114,8 +113,10 @@
#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */
-#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
+#define TIOCSERGETMULTI 0x80a8545a /* Get multiport config */
+ /* _IOR('T', 90, struct serial_multiport_struct) */
+#define TIOCSERSETMULTI 0x40a8545b /* Set multiport config */
+ /* _IOW('T', 91, struct serial_multiport_struct) */
#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index b939552..8883fc8 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -739,7 +739,10 @@
#define __NR_sched_getattr 335
__SYSCALL(335, sys_sched_getattr, 3)
-#define __NR_syscall_count 336
+#define __NR_renameat2 336
+__SYSCALL(336, sys_renameat2, 5)
+
+#define __NR_syscall_count 337
/*
* sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S
index d4cef60..890004a 100644
--- a/arch/xtensa/kernel/align.S
+++ b/arch/xtensa/kernel/align.S
@@ -8,6 +8,7 @@
* this archive for more details.
*
* Copyright (C) 2001 - 2005 Tensilica, Inc.
+ * Copyright (C) 2014 Cadence Design Systems Inc.
*
* Rewritten by Chris Zankel <chris@zankel.net>
*
@@ -174,6 +175,10 @@
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
+ rsr a3, excsave1
+ movi a4, fast_unaligned_fixup
+ s32i a4, a3, EXC_TABLE_FIXUP
+
/* Keep value of SAR in a0 */
rsr a0, sar
@@ -225,10 +230,6 @@
addx8 a5, a6, a5
jx a5 # jump into table
- /* Invalid instruction, CRITICAL! */
-.Linvalid_instruction_load:
- j .Linvalid_instruction
-
/* Load: Load memory address. */
.Lload: movi a3, ~3
@@ -272,18 +273,6 @@
/* Set target register. */
1:
-
-#if XCHAL_HAVE_LOOPS
- rsr a5, lend # check if we reached LEND
- bne a7, a5, 1f
- rsr a5, lcount # and LCOUNT != 0
- beqz a5, 1f
- addi a5, a5, -1 # decrement LCOUNT and set
- rsr a7, lbeg # set PC to LBEGIN
- wsr a5, lcount
-#endif
-
-1: wsr a7, epc1 # skip load instruction
extui a4, a4, INSN_T, 4 # extract target register
movi a5, .Lload_table
addx8 a4, a4, a5
@@ -326,6 +315,35 @@
mov a3, a14 ; _j 1f; .align 8
mov a3, a15 ; _j 1f; .align 8
+ /* We cannot handle this exception. */
+
+ .extern _kernel_exception
+.Linvalid_instruction_load:
+.Linvalid_instruction_store:
+
+ movi a4, 0
+ rsr a3, excsave1
+ s32i a4, a3, EXC_TABLE_FIXUP
+
+ /* Restore a4...a8 and SAR, set SP, and jump to default exception. */
+
+ l32i a8, a2, PT_AREG8
+ l32i a7, a2, PT_AREG7
+ l32i a6, a2, PT_AREG6
+ l32i a5, a2, PT_AREG5
+ l32i a4, a2, PT_AREG4
+ wsr a0, sar
+ mov a1, a2
+
+ rsr a0, ps
+ bbsi.l a0, PS_UM_BIT, 2f # jump if user mode
+
+ movi a0, _kernel_exception
+ jx a0
+
+2: movi a0, _user_exception
+ jx a0
+
1: # a7: instruction pointer, a4: instruction, a3: value
movi a6, 0 # mask: ffffffff:00000000
@@ -353,17 +371,6 @@
/* Get memory address */
1:
-#if XCHAL_HAVE_LOOPS
- rsr a4, lend # check if we reached LEND
- bne a7, a4, 1f
- rsr a4, lcount # and LCOUNT != 0
- beqz a4, 1f
- addi a4, a4, -1 # decrement LCOUNT and set
- rsr a7, lbeg # set PC to LBEGIN
- wsr a4, lcount
-#endif
-
-1: wsr a7, epc1 # skip store instruction
movi a4, ~3
and a4, a4, a8 # align memory address
@@ -375,25 +382,25 @@
#endif
__ssa8r a8
- __src_b a7, a5, a6 # lo-mask F..F0..0 (BE) 0..0F..F (LE)
+ __src_b a8, a5, a6 # lo-mask F..F0..0 (BE) 0..0F..F (LE)
__src_b a6, a6, a5 # hi-mask 0..0F..F (BE) F..F0..0 (LE)
#ifdef UNALIGNED_USER_EXCEPTION
l32e a5, a4, -8
#else
l32i a5, a4, 0 # load lower address word
#endif
- and a5, a5, a7 # mask
- __sh a7, a3 # shift value
- or a5, a5, a7 # or with original value
+ and a5, a5, a8 # mask
+ __sh a8, a3 # shift value
+ or a5, a5, a8 # or with original value
#ifdef UNALIGNED_USER_EXCEPTION
s32e a5, a4, -8
- l32e a7, a4, -4
+ l32e a8, a4, -4
#else
s32i a5, a4, 0 # store
- l32i a7, a4, 4 # same for upper address word
+ l32i a8, a4, 4 # same for upper address word
#endif
__sl a5, a3
- and a6, a7, a6
+ and a6, a8, a6
or a6, a6, a5
#ifdef UNALIGNED_USER_EXCEPTION
s32e a6, a4, -4
@@ -401,9 +408,27 @@
s32i a6, a4, 4
#endif
- /* Done. restore stack and return */
-
.Lexit:
+#if XCHAL_HAVE_LOOPS
+ rsr a4, lend # check if we reached LEND
+ bne a7, a4, 1f
+ rsr a4, lcount # and LCOUNT != 0
+ beqz a4, 1f
+ addi a4, a4, -1 # decrement LCOUNT and set
+ rsr a7, lbeg # set PC to LBEGIN
+ wsr a4, lcount
+#endif
+
+1: wsr a7, epc1 # skip emulated instruction
+
+ /* Update icount if we're single-stepping in userspace. */
+ rsr a4, icountlevel
+ beqz a4, 1f
+ bgeui a4, LOCKLEVEL + 1, 1f
+ rsr a4, icount
+ addi a4, a4, 1
+ wsr a4, icount
+1:
movi a4, 0
rsr a3, excsave1
s32i a4, a3, EXC_TABLE_FIXUP
@@ -424,31 +449,40 @@
l32i a2, a2, PT_AREG2
rfe
- /* We cannot handle this exception. */
+ENDPROC(fast_unaligned)
- .extern _kernel_exception
-.Linvalid_instruction_store:
-.Linvalid_instruction:
+ENTRY(fast_unaligned_fixup)
- /* Restore a4...a8 and SAR, set SP, and jump to default exception. */
+ l32i a2, a3, EXC_TABLE_DOUBLE_SAVE
+ wsr a3, excsave1
l32i a8, a2, PT_AREG8
l32i a7, a2, PT_AREG7
l32i a6, a2, PT_AREG6
l32i a5, a2, PT_AREG5
l32i a4, a2, PT_AREG4
+ l32i a0, a2, PT_AREG2
+ xsr a0, depc # restore depc and a0
wsr a0, sar
- mov a1, a2
+
+ rsr a0, exccause
+ s32i a0, a2, PT_DEPC # mark as a regular exception
rsr a0, ps
- bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
+ bbsi.l a0, PS_UM_BIT, 1f # jump if user mode
- movi a0, _kernel_exception
+ rsr a0, exccause
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler
+ l32i a3, a2, PT_AREG3
+ jx a0
+1:
+ rsr a0, exccause
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_USER # load handler
+ l32i a3, a2, PT_AREG3
jx a0
-1: movi a0, _user_exception
- jx a0
-
-ENDPROC(fast_unaligned)
+ENDPROC(fast_unaligned_fixup)
#endif /* XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index ef7f499..82bbfa5 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -986,6 +986,8 @@
* j done
*/
+#ifdef CONFIG_FAST_SYSCALL_XTENSA
+
#define TRY \
.section __ex_table, "a"; \
.word 66f, 67f; \
@@ -1001,9 +1003,8 @@
movi a7, 4 # sizeof(unsigned int)
access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp
- addi a6, a6, -1 # assuming SYS_XTENSA_ATOMIC_SET = 1
- _bgeui a6, SYS_XTENSA_COUNT - 1, .Lill
- _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp
+ _bgeui a6, SYS_XTENSA_COUNT, .Lill
+ _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp
/* Fall through for ATOMIC_CMP_SWP. */
@@ -1015,27 +1016,26 @@
l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 1 # and return 1
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
1: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 0 # return 0 (note that we cannot set
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
.Lnswp: /* Atomic set, add, and exg_add. */
TRY l32i a7, a3, 0 # orig
+ addi a6, a6, -SYS_XTENSA_ATOMIC_SET
add a0, a4, a7 # + arg
moveqz a0, a4, a6 # set
+ addi a6, a6, SYS_XTENSA_ATOMIC_SET
TRY s32i a0, a3, 0 # write new value
mov a0, a2
mov a2, a7
l32i a7, a0, PT_AREG7 # restore a7
l32i a0, a0, PT_AREG0 # restore a0
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
CATCH
@@ -1044,13 +1044,25 @@
movi a2, -EFAULT
rfe
-.Lill: l32i a7, a2, PT_AREG0 # restore a7
+.Lill: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, -EINVAL
rfe
ENDPROC(fast_syscall_xtensa)
+#else /* CONFIG_FAST_SYSCALL_XTENSA */
+
+ENTRY(fast_syscall_xtensa)
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -ENOSYS
+ rfe
+
+ENDPROC(fast_syscall_xtensa)
+
+#endif /* CONFIG_FAST_SYSCALL_XTENSA */
+
/* fast_syscall_spill_registers.
*
@@ -1066,6 +1078,8 @@
* Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
*/
+#ifdef CONFIG_FAST_SYSCALL_SPILL_REGISTERS
+
ENTRY(fast_syscall_spill_registers)
/* Register a FIXUP handler (pass current wb as a parameter) */
@@ -1400,6 +1414,18 @@
ENDPROC(fast_syscall_spill_registers_fixup_return)
+#else /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
+
+ENTRY(fast_syscall_spill_registers)
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -ENOSYS
+ rfe
+
+ENDPROC(fast_syscall_spill_registers)
+
+#endif /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
+
#ifdef CONFIG_MMU
/*
* We should never get here. Bail out!
@@ -1565,7 +1591,7 @@
rsr a0, excvaddr
bltu a0, a3, 2f
- addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
+ addi a1, a0, -TLBTEMP_SIZE
bgeu a1, a3, 2f
/* Check if we have to restore an ITLB mapping. */
@@ -1820,7 +1846,6 @@
entry a1, 16
- mov a10, a2 # preserve 'prev' (a2)
mov a11, a3 # and 'next' (a3)
l32i a4, a2, TASK_THREAD_INFO
@@ -1828,8 +1853,14 @@
save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
- s32i a0, a10, THREAD_RA # save return address
- s32i a1, a10, THREAD_SP # save stack pointer
+#if THREAD_RA > 1020 || THREAD_SP > 1020
+ addi a10, a2, TASK_THREAD
+ s32i a0, a10, THREAD_RA - TASK_THREAD # save return address
+ s32i a1, a10, THREAD_SP - TASK_THREAD # save stack pointer
+#else
+ s32i a0, a2, THREAD_RA # save return address
+ s32i a1, a2, THREAD_SP # save stack pointer
+#endif
/* Disable ints while we manipulate the stack pointer. */
@@ -1870,7 +1901,6 @@
load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
wsr a14, ps
- mov a2, a10 # return 'prev'
rsync
retw
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 2d9cc6d..e8b76b8 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -49,9 +49,8 @@
/* We currently don't support coherent memory outside KSEG */
- if (ret < XCHAL_KSEG_CACHED_VADDR
- || ret >= XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE)
- BUG();
+ BUG_ON(ret < XCHAL_KSEG_CACHED_VADDR ||
+ ret > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
if (ret != 0) {
@@ -68,10 +67,11 @@
void dma_free_coherent(struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- long addr=(long)vaddr+XCHAL_KSEG_CACHED_VADDR-XCHAL_KSEG_BYPASS_VADDR;
+ unsigned long addr = (unsigned long)vaddr +
+ XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
- if (addr < 0 || addr >= XCHAL_KSEG_SIZE)
- BUG();
+ BUG_ON(addr < XCHAL_KSEG_CACHED_VADDR ||
+ addr > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
free_pages(addr, get_order(size));
}
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 40b5a37..4d02e38 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -571,6 +571,7 @@
};
on_each_cpu(ipi_flush_icache_range, &fd, 1);
}
+EXPORT_SYMBOL(flush_icache_range);
/* ------------------------------------------------------------------------- */
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index eebbfd8..9d2f45f 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -101,9 +101,8 @@
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
#ifdef CONFIG_XTENSA_UNALIGNED_USER
{ EXCCAUSE_UNALIGNED, USER, fast_unaligned },
-#else
-{ EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
#endif
+{ EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
{ EXCCAUSE_UNALIGNED, KRNL, fast_unaligned },
#endif
#ifdef CONFIG_MMU
@@ -264,7 +263,6 @@
*/
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
-#ifndef CONFIG_XTENSA_UNALIGNED_USER
void
do_unaligned_user (struct pt_regs *regs)
{
@@ -286,7 +284,6 @@
}
#endif
-#endif
void
do_debug(struct pt_regs *regs)
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 8453e6e..1b397a9 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -454,8 +454,14 @@
s32i a0, a2, PT_DEPC
_DoubleExceptionVector_handle_exception:
+ addi a0, a0, -EXCCAUSE_UNALIGNED
+ beqz a0, 2f
addx4 a0, a0, a3
- l32i a0, a0, EXC_TABLE_FAST_USER
+ l32i a0, a0, EXC_TABLE_FAST_USER + 4 * EXCCAUSE_UNALIGNED
+ xsr a3, excsave1
+ jx a0
+2:
+ movi a0, user_exception
xsr a3, excsave1
jx a0
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index d16db6d..fc1bc2b 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -269,13 +269,13 @@
.UserExceptionVector.literal)
SECTION_VECTOR (_DoubleExceptionVector_literal,
.DoubleExceptionVector.literal,
- DOUBLEEXC_VECTOR_VADDR - 40,
+ DOUBLEEXC_VECTOR_VADDR - 48,
SIZEOF(.UserExceptionVector.text),
.UserExceptionVector.text)
SECTION_VECTOR (_DoubleExceptionVector_text,
.DoubleExceptionVector.text,
DOUBLEEXC_VECTOR_VADDR,
- 40,
+ 48,
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 63cbb86..d75aa14 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -59,9 +59,68 @@
*
*/
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && defined(CONFIG_HIGHMEM)
-#error "HIGHMEM is not supported on cores with aliasing cache."
-#endif
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+static inline void kmap_invalidate_coherent(struct page *page,
+ unsigned long vaddr)
+{
+ if (!DCACHE_ALIAS_EQ(page_to_phys(page), vaddr)) {
+ unsigned long kvaddr;
+
+ if (!PageHighMem(page)) {
+ kvaddr = (unsigned long)page_to_virt(page);
+
+ __invalidate_dcache_page(kvaddr);
+ } else {
+ kvaddr = TLBTEMP_BASE_1 +
+ (page_to_phys(page) & DCACHE_ALIAS_MASK);
+
+ __invalidate_dcache_page_alias(kvaddr,
+ page_to_phys(page));
+ }
+ }
+}
+
+static inline void *coherent_kvaddr(struct page *page, unsigned long base,
+ unsigned long vaddr, unsigned long *paddr)
+{
+ if (PageHighMem(page) || !DCACHE_ALIAS_EQ(page_to_phys(page), vaddr)) {
+ *paddr = page_to_phys(page);
+ return (void *)(base + (vaddr & DCACHE_ALIAS_MASK));
+ } else {
+ *paddr = 0;
+ return page_to_virt(page);
+ }
+}
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ unsigned long paddr;
+ void *kvaddr = coherent_kvaddr(page, TLBTEMP_BASE_1, vaddr, &paddr);
+
+ pagefault_disable();
+ kmap_invalidate_coherent(page, vaddr);
+ set_bit(PG_arch_1, &page->flags);
+ clear_page_alias(kvaddr, paddr);
+ pagefault_enable();
+}
+
+void copy_user_highpage(struct page *dst, struct page *src,
+ unsigned long vaddr, struct vm_area_struct *vma)
+{
+ unsigned long dst_paddr, src_paddr;
+ void *dst_vaddr = coherent_kvaddr(dst, TLBTEMP_BASE_1, vaddr,
+ &dst_paddr);
+ void *src_vaddr = coherent_kvaddr(src, TLBTEMP_BASE_2, vaddr,
+ &src_paddr);
+
+ pagefault_disable();
+ kmap_invalidate_coherent(dst, vaddr);
+ set_bit(PG_arch_1, &dst->flags);
+ copy_page_alias(dst_vaddr, src_vaddr, dst_paddr, src_paddr);
+ pagefault_enable();
+}
+
+#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
@@ -103,7 +162,8 @@
if (!alias && !mapping)
return;
- __flush_invalidate_dcache_page((long)page_address(page));
+ virt = TLBTEMP_BASE_1 + (phys & DCACHE_ALIAS_MASK);
+ __flush_invalidate_dcache_page_alias(virt, phys);
virt = TLBTEMP_BASE_1 + (temp & DCACHE_ALIAS_MASK);
@@ -168,13 +228,12 @@
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) {
-
- unsigned long paddr = (unsigned long) page_address(page);
unsigned long phys = page_to_phys(page);
- unsigned long tmp = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
+ unsigned long tmp;
- __flush_invalidate_dcache_page(paddr);
-
+ tmp = TLBTEMP_BASE_1 + (phys & DCACHE_ALIAS_MASK);
+ __flush_invalidate_dcache_page_alias(tmp, phys);
+ tmp = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK);
__flush_invalidate_dcache_page_alias(tmp, phys);
__invalidate_icache_page_alias(tmp, phys);
diff --git a/arch/xtensa/mm/highmem.c b/arch/xtensa/mm/highmem.c
index 17a8c0d..8cfb71e 100644
--- a/arch/xtensa/mm/highmem.c
+++ b/arch/xtensa/mm/highmem.c
@@ -14,23 +14,45 @@
static pte_t *kmap_pte;
+#if DCACHE_WAY_SIZE > PAGE_SIZE
+unsigned int last_pkmap_nr_arr[DCACHE_N_COLORS];
+wait_queue_head_t pkmap_map_wait_arr[DCACHE_N_COLORS];
+
+static void __init kmap_waitqueues_init(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(pkmap_map_wait_arr); ++i)
+ init_waitqueue_head(pkmap_map_wait_arr + i);
+}
+#else
+static inline void kmap_waitqueues_init(void)
+{
+}
+#endif
+
+static inline enum fixed_addresses kmap_idx(int type, unsigned long color)
+{
+ return (type + KM_TYPE_NR * smp_processor_id()) * DCACHE_N_COLORS +
+ color;
+}
+
void *kmap_atomic(struct page *page)
{
enum fixed_addresses idx;
unsigned long vaddr;
- int type;
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
- type = kmap_atomic_idx_push();
- idx = type + KM_TYPE_NR * smp_processor_id();
+ idx = kmap_idx(kmap_atomic_idx_push(),
+ DCACHE_ALIAS(page_to_phys(page)));
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte - idx)));
+ BUG_ON(!pte_none(*(kmap_pte + idx)));
#endif
- set_pte(kmap_pte - idx, mk_pte(page, PAGE_KERNEL_EXEC));
+ set_pte(kmap_pte + idx, mk_pte(page, PAGE_KERNEL_EXEC));
return (void *)vaddr;
}
@@ -38,12 +60,10 @@
void __kunmap_atomic(void *kvaddr)
{
- int idx, type;
-
if (kvaddr >= (void *)FIXADDR_START &&
kvaddr < (void *)FIXADDR_TOP) {
- type = kmap_atomic_idx();
- idx = type + KM_TYPE_NR * smp_processor_id();
+ int idx = kmap_idx(kmap_atomic_idx(),
+ DCACHE_ALIAS((unsigned long)kvaddr));
/*
* Force other mappings to Oops if they'll try to access this
@@ -51,7 +71,7 @@
* is a bad idea also, in case the page changes cacheability
* attributes or becomes a protected page in a hypervisor.
*/
- pte_clear(&init_mm, kvaddr, kmap_pte - idx);
+ pte_clear(&init_mm, kvaddr, kmap_pte + idx);
local_flush_tlb_kernel_range((unsigned long)kvaddr,
(unsigned long)kvaddr + PAGE_SIZE);
@@ -69,4 +89,5 @@
/* cache the first kmap pte */
kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+ kmap_waitqueues_init();
}
diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S
index 1f68558..11a01c3 100644
--- a/arch/xtensa/mm/misc.S
+++ b/arch/xtensa/mm/misc.S
@@ -110,41 +110,24 @@
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
/*
- * clear_user_page (void *addr, unsigned long vaddr, struct page *page)
- * a2 a3 a4
+ * clear_page_alias(void *addr, unsigned long paddr)
+ * a2 a3
*/
-ENTRY(clear_user_page)
+ENTRY(clear_page_alias)
entry a1, 32
- /* Mark page dirty and determine alias. */
+ /* Skip setting up a temporary DTLB if not aliased low page. */
- movi a7, (1 << PG_ARCH_1)
- l32i a5, a4, PAGE_FLAGS
- xor a6, a2, a3
- extui a3, a3, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- extui a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- or a5, a5, a7
- slli a3, a3, PAGE_SHIFT
- s32i a5, a4, PAGE_FLAGS
+ movi a5, PAGE_OFFSET
+ movi a6, 0
+ beqz a3, 1f
- /* Skip setting up a temporary DTLB if not aliased. */
+ /* Setup a temporary DTLB for the addr. */
- beqz a6, 1f
-
- /* Invalidate kernel page. */
-
- mov a10, a2
- call8 __invalidate_dcache_page
-
- /* Setup a temporary DTLB with the color of the VPN */
-
- movi a4, ((PAGE_KERNEL | _PAGE_HW_WRITE) - PAGE_OFFSET) & 0xffffffff
- movi a5, TLBTEMP_BASE_1 # virt
- add a6, a2, a4 # ppn
- add a2, a5, a3 # add 'color'
-
+ addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE)
+ mov a4, a2
wdtlb a6, a2
dsync
@@ -165,62 +148,43 @@
/* We need to invalidate the temporary idtlb entry, if any. */
-1: addi a2, a2, -PAGE_SIZE
- idtlb a2
+1: idtlb a4
dsync
retw
-ENDPROC(clear_user_page)
+ENDPROC(clear_page_alias)
/*
- * copy_page_user (void *to, void *from, unsigned long vaddr, struct page *page)
- * a2 a3 a4 a5
+ * copy_page_alias(void *to, void *from,
+ * a2 a3
+ * unsigned long to_paddr, unsigned long from_paddr)
+ * a4 a5
*/
-ENTRY(copy_user_page)
+ENTRY(copy_page_alias)
entry a1, 32
- /* Mark page dirty and determine alias for destination. */
+ /* Skip setting up a temporary DTLB for destination if not aliased. */
- movi a8, (1 << PG_ARCH_1)
- l32i a9, a5, PAGE_FLAGS
- xor a6, a2, a4
- xor a7, a3, a4
- extui a4, a4, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- extui a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- extui a7, a7, PAGE_SHIFT, DCACHE_ALIAS_ORDER
- or a9, a9, a8
- slli a4, a4, PAGE_SHIFT
- s32i a9, a5, PAGE_FLAGS
- movi a5, ((PAGE_KERNEL | _PAGE_HW_WRITE) - PAGE_OFFSET) & 0xffffffff
+ movi a6, 0
+ movi a7, 0
+ beqz a4, 1f
- beqz a6, 1f
+ /* Setup a temporary DTLB for destination. */
- /* Invalidate dcache */
-
- mov a10, a2
- call8 __invalidate_dcache_page
-
- /* Setup a temporary DTLB with a matching color. */
-
- movi a8, TLBTEMP_BASE_1 # base
- add a6, a2, a5 # ppn
- add a2, a8, a4 # add 'color'
-
+ addi a6, a4, (PAGE_KERNEL | _PAGE_HW_WRITE)
wdtlb a6, a2
dsync
- /* Skip setting up a temporary DTLB for destination if not aliased. */
+ /* Skip setting up a temporary DTLB for source if not aliased. */
-1: beqz a7, 1f
+1: beqz a5, 1f
- /* Setup a temporary DTLB with a matching color. */
+ /* Setup a temporary DTLB for source. */
- movi a8, TLBTEMP_BASE_2 # base
- add a7, a3, a5 # ppn
- add a3, a8, a4
+ addi a7, a5, PAGE_KERNEL
addi a8, a3, 1 # way1
wdtlb a7, a8
@@ -271,7 +235,7 @@
retw
-ENDPROC(copy_user_page)
+ENDPROC(copy_page_alias)
#endif
@@ -300,6 +264,30 @@
retw
ENDPROC(__flush_invalidate_dcache_page_alias)
+
+/*
+ * void __invalidate_dcache_page_alias (addr, phys)
+ * a2 a3
+ */
+
+ENTRY(__invalidate_dcache_page_alias)
+
+ entry sp, 16
+
+ movi a7, 0 # required for exception handler
+ addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE)
+ mov a4, a2
+ wdtlb a6, a2
+ dsync
+
+ ___invalidate_dcache_page a2 a3
+
+ idtlb a4
+ dsync
+
+ retw
+
+ENDPROC(__invalidate_dcache_page_alias)
#endif
ENTRY(__tlbtemp_mapping_itlb)
diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c
index 3429b48..abe4513 100644
--- a/arch/xtensa/mm/mmu.c
+++ b/arch/xtensa/mm/mmu.c
@@ -18,32 +18,38 @@
#include <asm/io.h>
#if defined(CONFIG_HIGHMEM)
-static void * __init init_pmd(unsigned long vaddr)
+static void * __init init_pmd(unsigned long vaddr, unsigned long n_pages)
{
pgd_t *pgd = pgd_offset_k(vaddr);
pmd_t *pmd = pmd_offset(pgd, vaddr);
+ pte_t *pte;
+ unsigned long i;
- if (pmd_none(*pmd)) {
- unsigned i;
- pte_t *pte = alloc_bootmem_low_pages(PAGE_SIZE);
+ n_pages = ALIGN(n_pages, PTRS_PER_PTE);
- for (i = 0; i < 1024; i++)
- pte_clear(NULL, 0, pte + i);
+ pr_debug("%s: vaddr: 0x%08lx, n_pages: %ld\n",
+ __func__, vaddr, n_pages);
- set_pmd(pmd, __pmd(((unsigned long)pte) & PAGE_MASK));
- BUG_ON(pte != pte_offset_kernel(pmd, 0));
- pr_debug("%s: vaddr: 0x%08lx, pmd: 0x%p, pte: 0x%p\n",
- __func__, vaddr, pmd, pte);
- return pte;
- } else {
- return pte_offset_kernel(pmd, 0);
+ pte = alloc_bootmem_low_pages(n_pages * sizeof(pte_t));
+
+ for (i = 0; i < n_pages; ++i)
+ pte_clear(NULL, 0, pte + i);
+
+ for (i = 0; i < n_pages; i += PTRS_PER_PTE, ++pmd) {
+ pte_t *cur_pte = pte + i;
+
+ BUG_ON(!pmd_none(*pmd));
+ set_pmd(pmd, __pmd(((unsigned long)cur_pte) & PAGE_MASK));
+ BUG_ON(cur_pte != pte_offset_kernel(pmd, 0));
+ pr_debug("%s: pmd: 0x%p, pte: 0x%p\n",
+ __func__, pmd, cur_pte);
}
+ return pte;
}
static void __init fixedrange_init(void)
{
- BUILD_BUG_ON(FIXADDR_SIZE > PMD_SIZE);
- init_pmd(__fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK);
+ init_pmd(__fix_to_virt(0), __end_of_fixed_addresses);
}
#endif
@@ -52,7 +58,7 @@
memset(swapper_pg_dir, 0, PAGE_SIZE);
#ifdef CONFIG_HIGHMEM
fixedrange_init();
- pkmap_page_table = init_pmd(PKMAP_BASE);
+ pkmap_page_table = init_pmd(PKMAP_BASE, LAST_PKMAP);
kmap_init();
#endif
}
diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index bc423f7b..f14b4ab 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -520,7 +520,7 @@
*/
if (error) {
bio->bi_end_io = bip->bip_end_io;
- bio_endio(bio, error);
+ bio_endio_nodec(bio, error);
return;
}
diff --git a/block/blk-core.c b/block/blk-core.c
index c359d72..bf930f4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1252,7 +1252,6 @@
rq->__sector = (sector_t) -1;
rq->bio = rq->biotail = NULL;
memset(rq->__cmd, 0, sizeof(rq->__cmd));
- rq->cmd = rq->__cmd;
}
EXPORT_SYMBOL(blk_rq_set_block_pc);
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 5189cb1..4aac826 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -112,18 +112,22 @@
*/
void blk_mq_freeze_queue(struct request_queue *q)
{
+ bool freeze;
+
spin_lock_irq(q->queue_lock);
- q->mq_freeze_depth++;
+ freeze = !q->mq_freeze_depth++;
spin_unlock_irq(q->queue_lock);
- percpu_ref_kill(&q->mq_usage_counter);
- blk_mq_run_queues(q, false);
+ if (freeze) {
+ percpu_ref_kill(&q->mq_usage_counter);
+ blk_mq_run_queues(q, false);
+ }
wait_event(q->mq_freeze_wq, percpu_ref_is_zero(&q->mq_usage_counter));
}
static void blk_mq_unfreeze_queue(struct request_queue *q)
{
- bool wake = false;
+ bool wake;
spin_lock_irq(q->queue_lock);
wake = !--q->mq_freeze_depth;
@@ -172,6 +176,8 @@
/* tag was already set */
rq->errors = 0;
+ rq->cmd = rq->__cmd;
+
rq->extra_len = 0;
rq->sense_len = 0;
rq->resid_len = 0;
@@ -1068,13 +1074,17 @@
blk_account_io_start(rq, 1);
}
+static inline bool hctx_allow_merges(struct blk_mq_hw_ctx *hctx)
+{
+ return (hctx->flags & BLK_MQ_F_SHOULD_MERGE) &&
+ !blk_queue_nomerges(hctx->queue);
+}
+
static inline bool blk_mq_merge_queue_io(struct blk_mq_hw_ctx *hctx,
struct blk_mq_ctx *ctx,
struct request *rq, struct bio *bio)
{
- struct request_queue *q = hctx->queue;
-
- if (!(hctx->flags & BLK_MQ_F_SHOULD_MERGE)) {
+ if (!hctx_allow_merges(hctx)) {
blk_mq_bio_to_request(rq, bio);
spin_lock(&ctx->lock);
insert_rq:
@@ -1082,6 +1092,8 @@
spin_unlock(&ctx->lock);
return false;
} else {
+ struct request_queue *q = hctx->queue;
+
spin_lock(&ctx->lock);
if (!blk_mq_attempt_merge(q, ctx, bio)) {
blk_mq_bio_to_request(rq, bio);
@@ -1574,7 +1586,7 @@
hctx->tags = set->tags[i];
/*
- * Allocate space for all possible cpus to avoid allocation in
+ * Allocate space for all possible cpus to avoid allocation at
* runtime
*/
hctx->ctxs = kmalloc_node(nr_cpu_ids * sizeof(void *),
@@ -1662,8 +1674,8 @@
queue_for_each_hw_ctx(q, hctx, i) {
/*
- * If not software queues are mapped to this hardware queue,
- * disable it and free the request entries
+ * If no software queues are mapped to this hardware queue,
+ * disable it and free the request entries.
*/
if (!hctx->nr_ctx) {
struct blk_mq_tag_set *set = q->tag_set;
@@ -1713,14 +1725,10 @@
{
struct blk_mq_tag_set *set = q->tag_set;
- blk_mq_freeze_queue(q);
-
mutex_lock(&set->tag_list_lock);
list_del_init(&q->tag_set_list);
blk_mq_update_tag_set_depth(set);
mutex_unlock(&set->tag_list_lock);
-
- blk_mq_unfreeze_queue(q);
}
static void blk_mq_add_queue_tag_set(struct blk_mq_tag_set *set,
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index cadc378..3f31cf9 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1272,15 +1272,22 @@
rb_insert_color(&cfqg->rb_node, &st->rb);
}
+/*
+ * This has to be called only on activation of cfqg
+ */
static void
cfq_update_group_weight(struct cfq_group *cfqg)
{
- BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
-
if (cfqg->new_weight) {
cfqg->weight = cfqg->new_weight;
cfqg->new_weight = 0;
}
+}
+
+static void
+cfq_update_group_leaf_weight(struct cfq_group *cfqg)
+{
+ BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
if (cfqg->new_leaf_weight) {
cfqg->leaf_weight = cfqg->new_leaf_weight;
@@ -1299,7 +1306,12 @@
/* add to the service tree */
BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
- cfq_update_group_weight(cfqg);
+ /*
+ * Update leaf_weight. We cannot update weight at this point
+ * because cfqg might already have been activated and is
+ * contributing its current weight to the parent's child_weight.
+ */
+ cfq_update_group_leaf_weight(cfqg);
__cfq_group_service_tree_add(st, cfqg);
/*
@@ -1323,6 +1335,7 @@
*/
while ((parent = cfqg_parent(pos))) {
if (propagate) {
+ cfq_update_group_weight(pos);
propagate = !parent->nr_active++;
parent->children_weight += pos->weight;
}
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 51bf515..9b8eaec 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -279,7 +279,6 @@
r = blk_rq_unmap_user(bio);
if (!ret)
ret = r;
- blk_put_request(rq);
return ret;
}
@@ -297,8 +296,6 @@
if (hdr->interface_id != 'S')
return -EINVAL;
- if (hdr->cmd_len > BLK_MAX_CDB)
- return -EINVAL;
if (hdr->dxfer_len > (queue_max_hw_sectors(q) << 9))
return -EIO;
@@ -317,16 +314,23 @@
if (hdr->flags & SG_FLAG_Q_AT_HEAD)
at_head = 1;
+ ret = -ENOMEM;
rq = blk_get_request(q, writing ? WRITE : READ, GFP_KERNEL);
if (!rq)
- return -ENOMEM;
+ goto out;
blk_rq_set_block_pc(rq);
- if (blk_fill_sghdr_rq(q, rq, hdr, mode)) {
- blk_put_request(rq);
- return -EFAULT;
+ if (hdr->cmd_len > BLK_MAX_CDB) {
+ rq->cmd = kzalloc(hdr->cmd_len, GFP_KERNEL);
+ if (!rq->cmd)
+ goto out_put_request;
}
+ ret = -EFAULT;
+ if (blk_fill_sghdr_rq(q, rq, hdr, mode))
+ goto out_free_cdb;
+
+ ret = 0;
if (hdr->iovec_count) {
size_t iov_data_len;
struct iovec *iov = NULL;
@@ -335,7 +339,7 @@
0, NULL, &iov);
if (ret < 0) {
kfree(iov);
- goto out;
+ goto out_free_cdb;
}
iov_data_len = ret;
@@ -358,7 +362,7 @@
GFP_KERNEL);
if (ret)
- goto out;
+ goto out_free_cdb;
bio = rq->bio;
memset(sense, 0, sizeof(sense));
@@ -376,9 +380,14 @@
hdr->duration = jiffies_to_msecs(jiffies - start_time);
- return blk_complete_sghdr_rq(rq, hdr, bio);
-out:
+ ret = blk_complete_sghdr_rq(rq, hdr, bio);
+
+out_free_cdb:
+ if (rq->cmd != rq->__cmd)
+ kfree(rq->cmd);
+out_put_request:
blk_put_request(rq);
+out:
return ret;
}
@@ -448,6 +457,11 @@
}
rq = blk_get_request(q, in_len ? WRITE : READ, __GFP_WAIT);
+ if (!rq) {
+ err = -ENOMEM;
+ goto error;
+ }
+ blk_rq_set_block_pc(rq);
cmdlen = COMMAND_SIZE(opcode);
@@ -501,7 +515,6 @@
memset(sense, 0, sizeof(sense));
rq->sense = sense;
rq->sense_len = 0;
- blk_rq_set_block_pc(rq);
blk_execute_rq(q, disk, rq, 0);
@@ -521,7 +534,8 @@
error:
kfree(buffer);
- blk_put_request(rq);
+ if (rq)
+ blk_put_request(rq);
return err;
}
EXPORT_SYMBOL_GPL(sg_scsi_ioctl);
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index ce06149..9dfec48 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -196,6 +196,17 @@
.setup = lpss_i2c_setup,
};
+static struct lpss_shared_clock bsw_pwm_clock = {
+ .name = "pwm_clk",
+ .rate = 19200000,
+};
+
+static struct lpss_device_desc bsw_pwm_dev_desc = {
+ .clk_required = true,
+ .save_ctx = true,
+ .shared_clock = &bsw_pwm_clock,
+};
+
#else
#define LPSS_ADDR(desc) (0UL)
@@ -225,6 +236,12 @@
{ "INT33B2", },
{ "INT33FC", },
+ /* Braswell LPSS devices */
+ { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
+ { "8086228A", LPSS_ADDR(byt_uart_dev_desc) },
+ { "8086228E", LPSS_ADDR(byt_spi_dev_desc) },
+ { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) },
+
{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
{ "INT3431", LPSS_ADDR(lpt_dev_desc) },
{ "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a66ab65..9922cc4 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -197,6 +197,8 @@
t->rdata[t->ri++] = acpi_ec_read_data(ec);
if (t->rlen == t->ri) {
t->flags |= ACPI_EC_COMMAND_COMPLETE;
+ if (t->command == ACPI_EC_COMMAND_QUERY)
+ pr_debug("hardware QR_EC completion\n");
wakeup = true;
}
} else
@@ -208,7 +210,20 @@
}
return wakeup;
} else {
- if ((status & ACPI_EC_FLAG_IBF) == 0) {
+ /*
+ * There is firmware refusing to respond QR_EC when SCI_EVT
+ * is not set, for which case, we complete the QR_EC
+ * without issuing it to the firmware.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=86211
+ */
+ if (!(status & ACPI_EC_FLAG_SCI) &&
+ (t->command == ACPI_EC_COMMAND_QUERY)) {
+ t->flags |= ACPI_EC_COMMAND_POLL;
+ t->rdata[t->ri++] = 0x00;
+ t->flags |= ACPI_EC_COMMAND_COMPLETE;
+ pr_debug("software QR_EC completion\n");
+ wakeup = true;
+ } else if ((status & ACPI_EC_FLAG_IBF) == 0) {
acpi_ec_write_cmd(ec, t->command);
t->flags |= ACPI_EC_COMMAND_POLL;
} else
@@ -288,11 +303,11 @@
/* following two actions should be kept atomic */
ec->curr = t;
start_transaction(ec);
- if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
- clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->lock, tmp);
ret = ec_poll(ec);
spin_lock_irqsave(&ec->lock, tmp);
+ if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
ec->curr = NULL;
spin_unlock_irqrestore(&ec->lock, tmp);
return ret;
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index c96887d..6e6b80e 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -484,6 +484,10 @@
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
+#ifdef CONFIG_PM_RUNTIME
+ if (dev->dev.power.runtime_status == RPM_SUSPENDING)
+ return;
+#endif
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 0a817ad..9a92989 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -922,12 +922,17 @@
device->driver->ops.notify(device, event);
}
-static acpi_status acpi_device_notify_fixed(void *data)
+static void acpi_device_notify_fixed(void *data)
{
struct acpi_device *device = data;
/* Fixed hardware devices have no handles */
acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
+}
+
+static acpi_status acpi_device_fixed_event(void *data)
+{
+ acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_device_notify_fixed, data);
return AE_OK;
}
@@ -938,12 +943,12 @@
if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_device_notify_fixed,
+ acpi_device_fixed_event,
device);
else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_device_notify_fixed,
+ acpi_device_fixed_event,
device);
else
status = acpi_install_notify_handler(device->handle,
@@ -960,10 +965,10 @@
{
if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_device_notify_fixed);
+ acpi_device_fixed_event);
else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_device_notify_fixed);
+ acpi_device_fixed_event);
else
acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
acpi_device_notify);
@@ -975,7 +980,7 @@
struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
int ret;
- if (acpi_dev->handler)
+ if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev))
return -EINVAL;
if (!acpi_drv->ops.add)
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index fc3df47..f1fef74 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -24,8 +24,8 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
-#include <linux/tegra-powergate.h>
#include <linux/regulator/consumer.h>
+#include <soc/tegra/pmc.h>
#include "ahci.h"
#define SATA_CONFIGURATION_0 0x180
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index bc28111..c696230 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -344,7 +344,7 @@
};
static const struct ata_port_info xgene_ahci_port_info = {
- .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+ .flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &xgene_ahci_ops,
@@ -480,7 +480,7 @@
/* Configure the host controller */
xgene_ahci_hw_init(hpriv);
- hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ;
+ hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
if (rc)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dbdc5d3..f3e7b9f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4228,7 +4228,7 @@
{ "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
{ "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
{ "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Crucial_CT???M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Crucial_CT*M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
/*
* Some WD SATA-I drives spin up and down erratically when the link
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index 2578fc1..1a24a5d 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -360,7 +360,7 @@
/*
* pata_s3c_bus_softreset - PATA device software reset
*/
-static unsigned int pata_s3c_bus_softreset(struct ata_port *ap,
+static int pata_s3c_bus_softreset(struct ata_port *ap,
unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 4e006d7..7f4cb76 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -585,7 +585,7 @@
* Note: Original code is ata_bus_softreset().
*/
-static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
+static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -599,9 +599,7 @@
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- scc_wait_after_reset(&ap->link, devmask, deadline);
-
- return 0;
+ return scc_wait_after_reset(&ap->link, devmask, deadline);
}
/**
@@ -618,7 +616,8 @@
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- unsigned int devmask = 0, err_mask;
+ unsigned int devmask = 0;
+ int rc;
u8 err;
DPRINTK("ENTER\n");
@@ -634,9 +633,9 @@
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
- err_mask = scc_bus_softreset(ap, devmask, deadline);
- if (err_mask) {
- ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", err_mask);
+ rc = scc_bus_softreset(ap, devmask, deadline);
+ if (rc) {
+ ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc);
return -EIO;
}
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index c7d138e..3598110 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -442,12 +442,15 @@
int rd_size = CONFIG_BLK_DEV_RAM_SIZE;
static int max_part;
static int part_shift;
+static int part_show = 0;
module_param(rd_nr, int, S_IRUGO);
MODULE_PARM_DESC(rd_nr, "Maximum number of brd devices");
module_param(rd_size, int, S_IRUGO);
MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes.");
module_param(max_part, int, S_IRUGO);
MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
+module_param(part_show, int, S_IRUGO);
+MODULE_PARM_DESC(part_show, "Control RAM disk visibility in /proc/partitions");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
MODULE_ALIAS("rd");
@@ -501,7 +504,8 @@
disk->fops = &brd_fops;
disk->private_data = brd;
disk->queue = brd->brd_queue;
- disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
+ if (!part_show)
+ disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
sprintf(disk->disk_name, "ram%d", i);
set_capacity(disk, rd_size * 2);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ab3ea62..c4328d9 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1203,7 +1203,6 @@
.probe = ace_probe,
.remove = ace_remove,
.driver = {
- .owner = THIS_MODULE,
.name = "xsysace",
.of_match_table = ace_of_match,
},
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index dfa4024..d00831c 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -378,7 +378,6 @@
/* Should NEVER happen. Return bio error if it does. */
if (unlikely(ret)) {
pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
- atomic64_inc(&zram->stats.failed_reads);
return ret;
}
@@ -547,8 +546,6 @@
zcomp_strm_release(zram->comp, zstrm);
if (is_partial_io(bvec))
kfree(uncmem);
- if (ret)
- atomic64_inc(&zram->stats.failed_writes);
return ret;
}
@@ -566,6 +563,13 @@
ret = zram_bvec_write(zram, bvec, index, offset);
}
+ if (unlikely(ret)) {
+ if (rw == READ)
+ atomic64_inc(&zram->stats.failed_reads);
+ else
+ atomic64_inc(&zram->stats.failed_writes);
+ }
+
return ret;
}
diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
index 5b0afde..e0f725c 100644
--- a/drivers/block/zram/zram_drv.h
+++ b/drivers/block/zram/zram_drv.h
@@ -84,7 +84,7 @@
atomic64_t compr_data_size; /* compressed size of pages stored */
atomic64_t num_reads; /* failed + successful */
atomic64_t num_writes; /* --do-- */
- atomic64_t failed_reads; /* should NEVER! happen */
+ atomic64_t failed_reads; /* can happen when memory is too low */
atomic64_t failed_writes; /* can happen when memory is too low */
atomic64_t invalid_io; /* non-page-aligned I/O requests */
atomic64_t notify_free; /* no. of swap slot free notifications */
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 3266f8f..6f550d9 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -662,7 +662,7 @@
}
if (e->num_vcs && vc >= e->num_vcs) {
dev_warn(ccn->dev, "Invalid vc %d for node/XP %d!\n",
- port, node_xp);
+ vc, node_xp);
return -EINVAL;
}
valid = 1;
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index e002923..531d4f6 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
# for emply built-in.o
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index c5eac94..e396ad3 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -660,6 +660,7 @@
ICPU(0x3f, core_params),
ICPU(0x45, core_params),
ICPU(0x46, core_params),
+ ICPU(0x4c, byt_params),
ICPU(0x4f, core_params),
ICPU(0x56, core_params),
{}
@@ -688,7 +689,7 @@
add_timer_on(&cpu->timer, cpunum);
- pr_info("Intel pstate controlling: cpu %d\n", cpunum);
+ pr_debug("Intel pstate controlling: cpu %d\n", cpunum);
return 0;
}
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 9a68225..3f9791f 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -501,7 +501,7 @@
return val >> 8;
}
-static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
+static int s5pv210_cpu_init(struct cpufreq_policy *policy)
{
unsigned long mem_type;
int ret;
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
index 344d79fa..ef94c3b 100644
--- a/drivers/cpuidle/cpuidle-big_little.c
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -138,25 +138,18 @@
return idx;
}
-static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
+static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int part_id)
{
- struct cpuinfo_arm *cpu_info;
struct cpumask *cpumask;
- unsigned long cpuid;
int cpu;
cpumask = kzalloc(cpumask_size(), GFP_KERNEL);
if (!cpumask)
return -ENOMEM;
- for_each_possible_cpu(cpu) {
- cpu_info = &per_cpu(cpu_data, cpu);
- cpuid = is_smp() ? cpu_info->cpuid : read_cpuid_id();
-
- /* read cpu id part number */
- if ((cpuid & 0xFFF0) == cpu_id)
+ for_each_possible_cpu(cpu)
+ if (smp_cpuid_part(cpu) == part_id)
cpumask_set_cpu(cpu, cpumask);
- }
drv->cpumask = cpumask;
diff --git a/drivers/dma-buf/fence.c b/drivers/dma-buf/fence.c
index 4222cb2..7bb9d65 100644
--- a/drivers/dma-buf/fence.c
+++ b/drivers/dma-buf/fence.c
@@ -29,7 +29,7 @@
EXPORT_TRACEPOINT_SYMBOL(fence_annotate_wait_on);
EXPORT_TRACEPOINT_SYMBOL(fence_emit);
-/**
+/*
* fence context counter: each execution context should have its own
* fence context, this allows checking if fences belong to the same
* context or not. One device can have multiple separate contexts,
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index f0a4364..5abe943 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -481,7 +481,7 @@
*/
static void efivar_entry_list_del_unlock(struct efivar_entry *entry)
{
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
list_del(&entry->list);
spin_unlock_irq(&__efivars->lock);
@@ -507,7 +507,7 @@
const struct efivar_operations *ops = __efivars->ops;
efi_status_t status;
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
status = ops->set_variable(entry->var.VariableName,
&entry->var.VendorGuid,
@@ -667,7 +667,7 @@
int strsize1, strsize2;
bool found = false;
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
list_for_each_entry_safe(entry, n, head, list) {
strsize1 = ucs2_strsize(name, 1024);
@@ -739,7 +739,7 @@
const struct efivar_operations *ops = __efivars->ops;
efi_status_t status;
- WARN_ON(!spin_is_locked(&__efivars->lock));
+ lockdep_assert_held(&__efivars->lock);
status = ops->get_variable(entry->var.VariableName,
&entry->var.VendorGuid,
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 41b2f40..954b9f6 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -90,7 +90,7 @@
struct gpio_desc **dr;
struct gpio_desc *desc;
- dr = devres_alloc(devm_gpiod_release, sizeof(struct gpiod_desc *),
+ dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
GFP_KERNEL);
if (!dr)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index ff9eb91..fa945ec 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -407,9 +407,27 @@
return 0;
}
+static int lp_gpio_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct lp_gpio *lg = platform_get_drvdata(pdev);
+ unsigned long reg;
+ int i;
+
+ /* on some hardware suspend clears input sensing, re-enable it here */
+ for (i = 0; i < lg->chip.ngpio; i++) {
+ if (gpiochip_is_requested(&lg->chip, i) != NULL) {
+ reg = lp_gpio_reg(&lg->chip, i, LP_CONFIG2);
+ outl(inl(reg) & ~GPINDIS_BIT, reg);
+ }
+ }
+ return 0;
+}
+
static const struct dev_pm_ops lp_gpio_pm_ops = {
.runtime_suspend = lp_gpio_runtime_suspend,
.runtime_resume = lp_gpio_runtime_resume,
+ .resume = lp_gpio_resume,
};
static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index c3145f9..31ad5df 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -95,6 +95,9 @@
struct clk *clk;
};
+static struct irq_chip zynq_gpio_level_irqchip;
+static struct irq_chip zynq_gpio_edge_irqchip;
+
/**
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
* for a given pin in the GPIO device
@@ -410,6 +413,15 @@
gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
writel_relaxed(int_any,
gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+
+ if (type & IRQ_TYPE_LEVEL_MASK) {
+ __irq_set_chip_handler_name_locked(irq_data->irq,
+ &zynq_gpio_level_irqchip, handle_fasteoi_irq, NULL);
+ } else {
+ __irq_set_chip_handler_name_locked(irq_data->irq,
+ &zynq_gpio_edge_irqchip, handle_level_irq, NULL);
+ }
+
return 0;
}
@@ -424,9 +436,21 @@
}
/* irq chip descriptor */
-static struct irq_chip zynq_gpio_irqchip = {
+static struct irq_chip zynq_gpio_level_irqchip = {
.name = DRIVER_NAME,
.irq_enable = zynq_gpio_irq_enable,
+ .irq_eoi = zynq_gpio_irq_ack,
+ .irq_mask = zynq_gpio_irq_mask,
+ .irq_unmask = zynq_gpio_irq_unmask,
+ .irq_set_type = zynq_gpio_set_irq_type,
+ .irq_set_wake = zynq_gpio_set_wake,
+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+};
+
+static struct irq_chip zynq_gpio_edge_irqchip = {
+ .name = DRIVER_NAME,
+ .irq_enable = zynq_gpio_irq_enable,
+ .irq_ack = zynq_gpio_irq_ack,
.irq_mask = zynq_gpio_irq_mask,
.irq_unmask = zynq_gpio_irq_unmask,
.irq_set_type = zynq_gpio_set_irq_type,
@@ -469,10 +493,6 @@
offset);
generic_handle_irq(gpio_irq);
}
-
- /* clear IRQ in HW */
- writel_relaxed(int_sts, gpio->base_addr +
- ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
}
}
@@ -610,14 +630,14 @@
writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
- ret = gpiochip_irqchip_add(chip, &zynq_gpio_irqchip, 0,
- handle_simple_irq, IRQ_TYPE_NONE);
+ ret = gpiochip_irqchip_add(chip, &zynq_gpio_edge_irqchip, 0,
+ handle_level_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(&pdev->dev, "Failed to add irq chip\n");
goto err_rm_gpiochip;
}
- gpiochip_set_chained_irqchip(chip, &zynq_gpio_irqchip, irq,
+ gpiochip_set_chained_irqchip(chip, &zynq_gpio_edge_irqchip, irq,
zynq_gpio_irqhandler);
pm_runtime_set_active(&pdev->dev);
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 7cfdc22..604dbe6 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -307,7 +307,5 @@
void of_gpiochip_remove(struct gpio_chip *chip)
{
gpiochip_remove_pin_ranges(chip);
-
- if (chip->of_node)
- of_node_put(chip->of_node);
+ of_node_put(chip->of_node);
}
diff --git a/drivers/gpu/drm/ast/ast_tables.h b/drivers/gpu/drm/ast/ast_tables.h
index 4c761dc..05c01ea 100644
--- a/drivers/gpu/drm/ast/ast_tables.h
+++ b/drivers/gpu/drm/ast/ast_tables.h
@@ -99,6 +99,7 @@
{0x25, 0x65, 0x80}, /* 16: VCLK88.75 */
{0x77, 0x58, 0x80}, /* 17: VCLK119 */
{0x32, 0x67, 0x80}, /* 18: VCLK85_5 */
+ {0x6a, 0x6d, 0x80}, /* 19: VCLK97_75 */
};
static struct ast_vbios_stdtable vbios_stdtable[] = {
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index fa2be24..90e7730 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4696,8 +4696,9 @@
return -EINVAL;
/* overflow checks for 32bit size calculations */
+ /* NOTE: DIV_ROUND_UP() can overflow */
cpp = DIV_ROUND_UP(args->bpp, 8);
- if (cpp > 0xffffffffU / args->width)
+ if (!cpp || cpp > 0xffffffffU / args->width)
return -EINVAL;
stride = cpp * args->width;
if (args->height > 0xffffffffU / stride)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ec96f9a..e27cdbe 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -494,6 +494,36 @@
return true;
}
+void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
+{
+ spin_lock_irq(&dev_priv->irq_lock);
+
+ dev_priv->long_hpd_port_mask = 0;
+ dev_priv->short_hpd_port_mask = 0;
+ dev_priv->hpd_event_bits = 0;
+
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ cancel_work_sync(&dev_priv->dig_port_work);
+ cancel_work_sync(&dev_priv->hotplug_work);
+ cancel_delayed_work_sync(&dev_priv->hotplug_reenable_work);
+}
+
+static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct drm_encoder *encoder;
+
+ drm_modeset_lock_all(dev);
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+ if (intel_encoder->suspend)
+ intel_encoder->suspend(intel_encoder);
+ }
+ drm_modeset_unlock_all(dev);
+}
+
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -538,6 +568,9 @@
flush_delayed_work(&dev_priv->rps.delayed_resume_work);
intel_runtime_pm_disable_interrupts(dev);
+ intel_hpd_cancel_work(dev_priv);
+
+ intel_suspend_encoders(dev_priv);
intel_suspend_gt_powersave(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 4412f6a..7a830ea 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1458,7 +1458,7 @@
} hpd_mark;
} hpd_stats[HPD_NUM_PINS];
u32 hpd_event_bits;
- struct timer_list hotplug_reenable_timer;
+ struct delayed_work hotplug_reenable_work;
struct i915_fbc fbc;
struct i915_drrs drrs;
@@ -2178,6 +2178,7 @@
extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool on);
+void intel_hpd_cancel_work(struct drm_i915_private *dev_priv);
extern void intel_console_resume(struct work_struct *work);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 390ccc2..0050ee9 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1189,8 +1189,8 @@
* some connectors */
if (hpd_disabled) {
drm_kms_helper_poll_enable(dev);
- mod_timer(&dev_priv->hotplug_reenable_timer,
- jiffies + msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
+ mod_delayed_work(system_wq, &dev_priv->hotplug_reenable_work,
+ msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
}
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
@@ -1213,11 +1213,6 @@
drm_kms_helper_hotplug_event(dev);
}
-static void intel_hpd_irq_uninstall(struct drm_i915_private *dev_priv)
-{
- del_timer_sync(&dev_priv->hotplug_reenable_timer);
-}
-
static void ironlake_rps_change_irq_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3892,8 +3887,6 @@
if (!dev_priv)
return;
- intel_hpd_irq_uninstall(dev_priv);
-
gen8_irq_reset(dev);
}
@@ -3908,8 +3901,6 @@
I915_WRITE(VLV_MASTER_IER, 0);
- intel_hpd_irq_uninstall(dev_priv);
-
for_each_pipe(pipe)
I915_WRITE(PIPESTAT(pipe), 0xffff);
@@ -3988,8 +3979,6 @@
if (!dev_priv)
return;
- intel_hpd_irq_uninstall(dev_priv);
-
ironlake_irq_reset(dev);
}
@@ -4360,8 +4349,6 @@
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
- intel_hpd_irq_uninstall(dev_priv);
-
if (I915_HAS_HOTPLUG(dev)) {
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
@@ -4598,8 +4585,6 @@
if (!dev_priv)
return;
- intel_hpd_irq_uninstall(dev_priv);
-
I915_WRITE(PORT_HOTPLUG_EN, 0);
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
@@ -4615,14 +4600,18 @@
I915_WRITE(IIR, I915_READ(IIR));
}
-static void intel_hpd_irq_reenable(unsigned long data)
+static void intel_hpd_irq_reenable(struct work_struct *work)
{
- struct drm_i915_private *dev_priv = (struct drm_i915_private *)data;
+ struct drm_i915_private *dev_priv =
+ container_of(work, typeof(*dev_priv),
+ hotplug_reenable_work.work);
struct drm_device *dev = dev_priv->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
unsigned long irqflags;
int i;
+ intel_runtime_pm_get(dev_priv);
+
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
for (i = (HPD_NONE + 1); i < HPD_NUM_PINS; i++) {
struct drm_connector *connector;
@@ -4648,6 +4637,8 @@
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+ intel_runtime_pm_put(dev_priv);
}
void intel_irq_init(struct drm_device *dev)
@@ -4670,8 +4661,8 @@
setup_timer(&dev_priv->gpu_error.hangcheck_timer,
i915_hangcheck_elapsed,
(unsigned long) dev);
- setup_timer(&dev_priv->hotplug_reenable_timer, intel_hpd_irq_reenable,
- (unsigned long) dev_priv);
+ INIT_DELAYED_WORK(&dev_priv->hotplug_reenable_work,
+ intel_hpd_irq_reenable);
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 2efaf8e..e8abfce 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -699,16 +699,21 @@
goto out;
}
+ drm_modeset_acquire_init(&ctx, 0);
+
/* for pre-945g platforms use load detect */
if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) {
if (intel_crt_detect_ddc(connector))
status = connector_status_connected;
else
status = intel_crt_load_detect(crt);
- intel_release_load_detect_pipe(connector, &tmp, &ctx);
+ intel_release_load_detect_pipe(connector, &tmp);
} else
status = connector_status_unknown;
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
out:
intel_display_power_put(dev_priv, power_domain);
return status;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 018fb72..d074d70 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8462,8 +8462,6 @@
connector->base.id, connector->name,
encoder->base.id, encoder->name);
- drm_modeset_acquire_init(ctx, 0);
-
retry:
ret = drm_modeset_lock(&config->connection_mutex, ctx);
if (ret)
@@ -8502,10 +8500,14 @@
i++;
if (!(encoder->possible_crtcs & (1 << i)))
continue;
- if (!possible_crtc->enabled) {
- crtc = possible_crtc;
- break;
- }
+ if (possible_crtc->enabled)
+ continue;
+ /* This can occur when applying the pipe A quirk on resume. */
+ if (to_intel_crtc(possible_crtc)->new_enabled)
+ continue;
+
+ crtc = possible_crtc;
+ break;
}
/*
@@ -8574,15 +8576,11 @@
goto retry;
}
- drm_modeset_drop_locks(ctx);
- drm_modeset_acquire_fini(ctx);
-
return false;
}
void intel_release_load_detect_pipe(struct drm_connector *connector,
- struct intel_load_detect_pipe *old,
- struct drm_modeset_acquire_ctx *ctx)
+ struct intel_load_detect_pipe *old)
{
struct intel_encoder *intel_encoder =
intel_attached_encoder(connector);
@@ -8606,17 +8604,12 @@
drm_framebuffer_unreference(old->release_fb);
}
- goto unlock;
return;
}
/* Switch crtc and encoder back off if necessary */
if (old->dpms_mode != DRM_MODE_DPMS_ON)
connector->funcs->dpms(connector, old->dpms_mode);
-
-unlock:
- drm_modeset_drop_locks(ctx);
- drm_modeset_acquire_fini(ctx);
}
static int i9xx_pll_refclk(struct drm_device *dev,
@@ -11700,8 +11693,8 @@
};
const struct drm_rect clip = {
/* integer pixels */
- .x2 = intel_crtc->config.pipe_src_w,
- .y2 = intel_crtc->config.pipe_src_h,
+ .x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
+ .y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
};
bool visible;
int ret;
@@ -12659,7 +12652,7 @@
struct intel_connector *connector;
struct drm_connector *crt = NULL;
struct intel_load_detect_pipe load_detect_temp;
- struct drm_modeset_acquire_ctx ctx;
+ struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
/* We can't just switch on the pipe A, we need to set things up with a
* proper mode and output configuration. As a gross hack, enable pipe A
@@ -12676,10 +12669,8 @@
if (!crt)
return;
- if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, &ctx))
- intel_release_load_detect_pipe(crt, &load_detect_temp, &ctx);
-
-
+ if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
+ intel_release_load_detect_pipe(crt, &load_detect_temp);
}
static bool
@@ -13112,7 +13103,7 @@
* experience fancy races otherwise.
*/
drm_irq_uninstall(dev);
- cancel_work_sync(&dev_priv->hotplug_work);
+ intel_hpd_cancel_work(dev_priv);
dev_priv->pm._irqs_disabled = true;
/*
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index ee3942f..67cfed6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3553,6 +3553,9 @@
if (WARN_ON(!intel_encoder->base.crtc))
return;
+ if (!to_intel_crtc(intel_encoder->base.crtc)->active)
+ return;
+
/* Try to read receiver status if the link appears to be up */
if (!intel_dp_get_link_status(intel_dp, link_status)) {
return;
@@ -4003,6 +4006,16 @@
kfree(intel_dig_port);
}
+static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
+
+ if (!is_edp(intel_dp))
+ return;
+
+ edp_panel_vdd_off_sync(intel_dp);
+}
+
static void intel_dp_encoder_reset(struct drm_encoder *encoder)
{
intel_edp_panel_vdd_sanitize(to_intel_encoder(encoder));
@@ -4037,15 +4050,21 @@
intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
{
struct intel_dp *intel_dp = &intel_dig_port->dp;
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- int ret;
+ enum intel_display_power_domain power_domain;
+ bool ret = true;
+
if (intel_dig_port->base.type != INTEL_OUTPUT_EDP)
intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT;
DRM_DEBUG_KMS("got hpd irq on port %d - %s\n", intel_dig_port->port,
long_hpd ? "long" : "short");
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
if (long_hpd) {
if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
goto mst_fail;
@@ -4061,8 +4080,7 @@
} else {
if (intel_dp->is_mst) {
- ret = intel_dp_check_mst_status(intel_dp);
- if (ret == -EINVAL)
+ if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
goto mst_fail;
}
@@ -4076,7 +4094,8 @@
drm_modeset_unlock(&dev->mode_config.connection_mutex);
}
}
- return false;
+ ret = false;
+ goto put_power;
mst_fail:
/* if we were in MST mode, and device is not there get out of MST mode */
if (intel_dp->is_mst) {
@@ -4084,7 +4103,10 @@
intel_dp->is_mst = false;
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
}
- return true;
+put_power:
+ intel_display_power_put(dev_priv, power_domain);
+
+ return ret;
}
/* Return which DP Port should be selected for Transcoder DP control */
@@ -4722,6 +4744,7 @@
intel_encoder->disable = intel_disable_dp;
intel_encoder->get_hw_state = intel_dp_get_hw_state;
intel_encoder->get_config = intel_dp_get_config;
+ intel_encoder->suspend = intel_dp_encoder_suspend;
if (IS_CHERRYVIEW(dev)) {
intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable;
intel_encoder->pre_enable = chv_pre_enable_dp;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4b2664b..b8c8bbd 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -153,6 +153,12 @@
* be set correctly before calling this function. */
void (*get_config)(struct intel_encoder *,
struct intel_crtc_config *pipe_config);
+ /*
+ * Called during system suspend after all pending requests for the
+ * encoder are flushed (for example for DP AUX transactions) and
+ * device interrupts are disabled.
+ */
+ void (*suspend)(struct intel_encoder *);
int crtc_mask;
enum hpd_pin hpd_pin;
};
@@ -830,8 +836,7 @@
struct intel_load_detect_pipe *old,
struct drm_modeset_acquire_ctx *ctx);
void intel_release_load_detect_pipe(struct drm_connector *connector,
- struct intel_load_detect_pipe *old,
- struct drm_modeset_acquire_ctx *ctx);
+ struct intel_load_detect_pipe *old);
int intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_i915_gem_object *obj,
struct intel_engine_cs *pipelined);
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index e211eef..32186a6 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1323,11 +1323,16 @@
struct intel_load_detect_pipe tmp;
struct drm_modeset_acquire_ctx ctx;
+ drm_modeset_acquire_init(&ctx, 0);
+
if (intel_get_load_detect_pipe(connector, &mode, &tmp, &ctx)) {
type = intel_tv_detect_type(intel_tv, connector);
- intel_release_load_detect_pipe(connector, &tmp, &ctx);
+ intel_release_load_detect_pipe(connector, &tmp);
} else
return connector_status_unknown;
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
} else
return connector->status;
diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c
index 74cebb5..c6c80ea2 100644
--- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c
+++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c
@@ -397,6 +397,7 @@
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
DBG("%s", mdp4_crtc->name);
/* make sure we hold a ref to mdp clks while setting up mode: */
+ drm_crtc_vblank_get(crtc);
mdp4_enable(get_kms(crtc));
mdp4_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
@@ -407,6 +408,7 @@
crtc_flush(crtc);
/* drop the ref to mdp clk's that we got in prepare: */
mdp4_disable(get_kms(crtc));
+ drm_crtc_vblank_put(crtc);
}
static int mdp4_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index b447c01..26ee80d 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -974,12 +974,11 @@
for (i = 0; i < ARRAY_SIZE(devnames); i++) {
struct device *dev;
- int ret;
dev = bus_find_device_by_name(&platform_bus_type,
NULL, devnames[i]);
if (!dev) {
- dev_info(master, "still waiting for %s\n", devnames[i]);
+ dev_info(&pdev->dev, "still waiting for %s\n", devnames[i]);
return -EPROBE_DEFER;
}
diff --git a/drivers/gpu/drm/msm/msm_fbdev.c b/drivers/gpu/drm/msm/msm_fbdev.c
index 9c5221c..ab5bfd2 100644
--- a/drivers/gpu/drm/msm/msm_fbdev.c
+++ b/drivers/gpu/drm/msm/msm_fbdev.c
@@ -143,7 +143,7 @@
ret = msm_gem_get_iova_locked(fbdev->bo, 0, &paddr);
if (ret) {
dev_err(dev->dev, "failed to get buffer obj iova: %d\n", ret);
- goto fail;
+ goto fail_unlock;
}
fbi = framebuffer_alloc(0, dev->dev);
diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c
index 099af48..7acdaa5 100644
--- a/drivers/gpu/drm/msm/msm_iommu.c
+++ b/drivers/gpu/drm/msm/msm_iommu.c
@@ -27,8 +27,8 @@
static int msm_fault_handler(struct iommu_domain *iommu, struct device *dev,
unsigned long iova, int flags, void *arg)
{
- DBG("*** fault: iova=%08lx, flags=%d", iova, flags);
- return -ENOSYS;
+ pr_warn_ratelimited("*** fault: iova=%08lx, flags=%d\n", iova, flags);
+ return 0;
}
static int msm_iommu_attach(struct msm_mmu *mmu, const char **names, int cnt)
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 0013ad0..f77b713 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -76,7 +76,7 @@
evergreen.o evergreen_cs.o evergreen_blit_shaders.o \
evergreen_hdmi.o radeon_trace_points.o ni.o cayman_blit_shaders.o \
atombios_encoders.o radeon_semaphore.o radeon_sa.o atombios_i2c.o si.o \
- si_blit_shaders.o radeon_prime.o radeon_uvd.o cik.o cik_blit_shaders.o \
+ si_blit_shaders.o radeon_prime.o cik.o cik_blit_shaders.o \
r600_dpm.o rs780_dpm.o rv6xx_dpm.o rv770_dpm.o rv730_dpm.o rv740_dpm.o \
rv770_smc.o cypress_dpm.o btc_dpm.o sumo_dpm.o sumo_smc.o trinity_dpm.o \
trinity_smc.o ni_dpm.o si_smc.o si_dpm.o kv_smc.o kv_dpm.o ci_smc.o \
diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index 022561e..d416bb2 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -869,6 +869,9 @@
WREG32_SMC(CG_THERMAL_CTRL, tmp);
#endif
+ rdev->pm.dpm.thermal.min_temp = low_temp;
+ rdev->pm.dpm.thermal.max_temp = high_temp;
+
return 0;
}
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index b625646..fa95659 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -3483,7 +3483,7 @@
u32 mc_shared_chmap, mc_arb_ramcfg;
u32 hdp_host_path_cntl;
u32 tmp;
- int i, j, k;
+ int i, j;
switch (rdev->family) {
case CHIP_BONAIRE:
@@ -3544,6 +3544,7 @@
(rdev->pdev->device == 0x130B) ||
(rdev->pdev->device == 0x130E) ||
(rdev->pdev->device == 0x1315) ||
+ (rdev->pdev->device == 0x1318) ||
(rdev->pdev->device == 0x131B)) {
rdev->config.cik.max_cu_per_sh = 4;
rdev->config.cik.max_backends_per_se = 1;
@@ -3672,12 +3673,11 @@
rdev->config.cik.max_sh_per_se,
rdev->config.cik.max_backends_per_se);
+ rdev->config.cik.active_cus = 0;
for (i = 0; i < rdev->config.cik.max_shader_engines; i++) {
for (j = 0; j < rdev->config.cik.max_sh_per_se; j++) {
- for (k = 0; k < rdev->config.cik.max_cu_per_sh; k++) {
- rdev->config.cik.active_cus +=
- hweight32(cik_get_cu_active_bitmap(rdev, i, j));
- }
+ rdev->config.cik.active_cus +=
+ hweight32(cik_get_cu_active_bitmap(rdev, i, j));
}
}
@@ -3801,7 +3801,7 @@
radeon_ring_write(ring, PACKET3(PACKET3_SET_UCONFIG_REG, 1));
radeon_ring_write(ring, ((scratch - PACKET3_SET_UCONFIG_REG_START) >> 2));
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
tmp = RREG32(scratch);
@@ -3920,6 +3920,17 @@
radeon_ring_write(ring, 0);
}
+/**
+ * cik_semaphore_ring_emit - emit a semaphore on the CP ring
+ *
+ * @rdev: radeon_device pointer
+ * @ring: radeon ring buffer object
+ * @semaphore: radeon semaphore object
+ * @emit_wait: Is this a sempahore wait?
+ *
+ * Emits a semaphore signal/wait packet to the CP ring and prevents the PFP
+ * from running ahead of semaphore waits.
+ */
bool cik_semaphore_ring_emit(struct radeon_device *rdev,
struct radeon_ring *ring,
struct radeon_semaphore *semaphore,
@@ -3932,6 +3943,12 @@
radeon_ring_write(ring, lower_32_bits(addr));
radeon_ring_write(ring, (upper_32_bits(addr) & 0xffff) | sel);
+ if (emit_wait && ring->idx == RADEON_RING_TYPE_GFX_INDEX) {
+ /* Prevent the PFP from running ahead of the semaphore wait */
+ radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
+ radeon_ring_write(ring, 0x0);
+ }
+
return true;
}
@@ -4004,7 +4021,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
@@ -4103,7 +4120,7 @@
ib.ptr[1] = ((scratch - PACKET3_SET_UCONFIG_REG_START) >> 2);
ib.ptr[2] = 0xDEADBEEF;
ib.length_dw = 3;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
radeon_scratch_free(rdev, scratch);
radeon_ib_free(rdev, &ib);
@@ -4324,7 +4341,7 @@
radeon_ring_write(ring, 0x0000000e); /* VGT_VERTEX_REUSE_BLOCK_CNTL */
radeon_ring_write(ring, 0x00000010); /* VGT_OUT_DEALLOC_CNTL */
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
return 0;
}
@@ -5732,20 +5749,17 @@
WREG32(0x15D8, 0);
WREG32(0x15DC, 0);
- /* empty context1-15 */
- /* FIXME start with 4G, once using 2 level pt switch to full
- * vm size space
- */
+ /* restore context1-15 */
/* set vm size, must be a multiple of 4 */
WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0);
WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn);
for (i = 1; i < 16; i++) {
if (i < 8)
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
- rdev->gart.table_addr >> 12);
+ rdev->vm_manager.saved_table_addr[i]);
else
WREG32(VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2),
- rdev->gart.table_addr >> 12);
+ rdev->vm_manager.saved_table_addr[i]);
}
/* enable context1-15 */
@@ -5810,6 +5824,17 @@
*/
static void cik_pcie_gart_disable(struct radeon_device *rdev)
{
+ unsigned i;
+
+ for (i = 1; i < 16; ++i) {
+ uint32_t reg;
+ if (i < 8)
+ reg = VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2);
+ else
+ reg = VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2);
+ rdev->vm_manager.saved_table_addr[i] = RREG32(reg);
+ }
+
/* Disable all tables */
WREG32(VM_CONTEXT0_CNTL, 0);
WREG32(VM_CONTEXT1_CNTL, 0);
@@ -5958,14 +5983,14 @@
/* update SH_MEM_* regs */
radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(usepfp) |
WRITE_DATA_DST_SEL(0)));
radeon_ring_write(ring, SRBM_GFX_CNTL >> 2);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, VMID(vm->id));
radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 6));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(usepfp) |
WRITE_DATA_DST_SEL(0)));
radeon_ring_write(ring, SH_MEM_BASES >> 2);
radeon_ring_write(ring, 0);
@@ -5976,7 +6001,7 @@
radeon_ring_write(ring, 0); /* SH_MEM_APE1_LIMIT */
radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(usepfp) |
WRITE_DATA_DST_SEL(0)));
radeon_ring_write(ring, SRBM_GFX_CNTL >> 2);
radeon_ring_write(ring, 0);
@@ -5987,7 +6012,7 @@
/* bits 0-15 are the VM contexts0-15 */
radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(usepfp) |
WRITE_DATA_DST_SEL(0)));
radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
radeon_ring_write(ring, 0);
@@ -9538,6 +9563,9 @@
int ret, i;
u16 tmp16;
+ if (pci_is_root_bus(rdev->pdev->bus))
+ return;
+
if (radeon_pcie_gen2 == 0)
return;
@@ -9764,7 +9792,8 @@
if (orig != data)
WREG32_PCIE_PORT(PCIE_LC_LINK_WIDTH_CNTL, data);
- if (!disable_clkreq) {
+ if (!disable_clkreq &&
+ !pci_is_root_bus(rdev->pdev->bus)) {
struct pci_dev *root = rdev->pdev->bus->self;
u32 lnkcap;
diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c
index bcf4805..192278b 100644
--- a/drivers/gpu/drm/radeon/cik_sdma.c
+++ b/drivers/gpu/drm/radeon/cik_sdma.c
@@ -596,7 +596,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
@@ -638,7 +638,7 @@
radeon_ring_write(ring, upper_32_bits(rdev->vram_scratch.gpu_addr));
radeon_ring_write(ring, 1); /* number of DWs to follow */
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
tmp = readl(ptr);
@@ -695,7 +695,7 @@
ib.ptr[4] = 0xDEADBEEF;
ib.length_dw = 5;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
radeon_ib_free(rdev, &ib);
DRM_ERROR("radeon: failed to schedule ib (%d).\n", r);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 4fedd14..dbca60c 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2869,7 +2869,7 @@
radeon_ring_write(ring, PACKET3_ME_INITIALIZE_DEVICE_ID(1));
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 0);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
cp_me = 0xff;
WREG32(CP_ME_CNTL, cp_me);
@@ -2912,7 +2912,7 @@
radeon_ring_write(ring, 0x0000000e); /* VGT_VERTEX_REUSE_BLOCK_CNTL */
radeon_ring_write(ring, 0x00000010); /* */
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
return 0;
}
diff --git a/drivers/gpu/drm/radeon/evergreen_dma.c b/drivers/gpu/drm/radeon/evergreen_dma.c
index 478caef..afaba38 100644
--- a/drivers/gpu/drm/radeon/evergreen_dma.c
+++ b/drivers/gpu/drm/radeon/evergreen_dma.c
@@ -155,7 +155,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c
index 9ef8c38..8b58e11 100644
--- a/drivers/gpu/drm/radeon/kv_dpm.c
+++ b/drivers/gpu/drm/radeon/kv_dpm.c
@@ -1438,14 +1438,14 @@
return kv_enable_uvd_dpm(rdev, !gate);
}
-static u8 kv_get_vce_boot_level(struct radeon_device *rdev)
+static u8 kv_get_vce_boot_level(struct radeon_device *rdev, u32 evclk)
{
u8 i;
struct radeon_vce_clock_voltage_dependency_table *table =
&rdev->pm.dpm.dyn_state.vce_clock_voltage_dependency_table;
for (i = 0; i < table->count; i++) {
- if (table->entries[i].evclk >= 0) /* XXX */
+ if (table->entries[i].evclk >= evclk)
break;
}
@@ -1468,7 +1468,7 @@
if (pi->caps_stable_p_state)
pi->vce_boot_level = table->count - 1;
else
- pi->vce_boot_level = kv_get_vce_boot_level(rdev);
+ pi->vce_boot_level = kv_get_vce_boot_level(rdev, radeon_new_state->evclk);
ret = kv_copy_bytes_to_smc(rdev,
pi->dpm_table_start +
@@ -2726,7 +2726,10 @@
pi->caps_sclk_ds = true;
pi->enable_auto_thermal_throttling = true;
pi->disable_nb_ps3_in_battery = false;
- pi->bapm_enable = true;
+ if (radeon_bapm == 0)
+ pi->bapm_enable = false;
+ else
+ pi->bapm_enable = true;
pi->voltage_drop_t = 0;
pi->caps_sclk_throttle_low_notification = false;
pi->caps_fps = false; /* true? */
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 327b85f..3faee58 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1271,7 +1271,7 @@
WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0);
WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), rdev->vm_manager.max_pfn);
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
- rdev->gart.table_addr >> 12);
+ rdev->vm_manager.saved_table_addr[i]);
}
/* enable context1-7 */
@@ -1303,6 +1303,13 @@
static void cayman_pcie_gart_disable(struct radeon_device *rdev)
{
+ unsigned i;
+
+ for (i = 1; i < 8; ++i) {
+ rdev->vm_manager.saved_table_addr[i] = RREG32(
+ VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2));
+ }
+
/* Disable all tables */
WREG32(VM_CONTEXT0_CNTL, 0);
WREG32(VM_CONTEXT1_CNTL, 0);
@@ -1505,7 +1512,7 @@
radeon_ring_write(ring, PACKET3_ME_INITIALIZE_DEVICE_ID(1));
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 0);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
cayman_cp_enable(rdev, true);
@@ -1547,7 +1554,7 @@
radeon_ring_write(ring, 0x0000000e); /* VGT_VERTEX_REUSE_BLOCK_CNTL */
radeon_ring_write(ring, 0x00000010); /* */
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
/* XXX init other rings */
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 04b5940..4c5ec44 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -925,7 +925,7 @@
if (fence) {
r = radeon_fence_emit(rdev, fence, RADEON_RING_TYPE_GFX_INDEX);
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
return r;
}
@@ -958,7 +958,7 @@
RADEON_ISYNC_ANY3D_IDLE2D |
RADEON_ISYNC_WAIT_IDLEGUI |
RADEON_ISYNC_CPSCRATCH_IDLEGUI);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
}
@@ -3638,7 +3638,7 @@
}
radeon_ring_write(ring, PACKET0(scratch, 0));
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
tmp = RREG32(scratch);
if (tmp == 0xDEADBEEF) {
@@ -3700,7 +3700,7 @@
ib.ptr[6] = PACKET2(0);
ib.ptr[7] = PACKET2(0);
ib.length_dw = 8;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
DRM_ERROR("radeon: failed to schedule ib (%d).\n", r);
goto free_ib;
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 58f0473..6778037 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -121,7 +121,7 @@
if (fence) {
r = radeon_fence_emit(rdev, fence, RADEON_RING_TYPE_GFX_INDEX);
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
return r;
}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 75b3033..1bc4704 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -295,7 +295,7 @@
radeon_ring_write(ring,
R300_GEOMETRY_ROUND_NEAREST |
R300_COLOR_ROUND_NEAREST);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
}
static void r300_errata(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 802b192..2828605 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -219,7 +219,7 @@
radeon_ring_write(ring, PACKET0(R300_CP_RESYNC_ADDR, 1));
radeon_ring_write(ring, rdev->config.r300.resync_scratch);
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
}
static void r420_cp_errata_fini(struct radeon_device *rdev)
@@ -232,7 +232,7 @@
radeon_ring_lock(rdev, ring, 8);
radeon_ring_write(ring, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
radeon_ring_write(ring, R300_RB3D_DC_FINISH);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_scratch_free(rdev, rdev->config.r300.resync_scratch);
}
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c70a504..e616eb5 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1812,7 +1812,6 @@
{
u32 tiling_config;
u32 ramcfg;
- u32 cc_rb_backend_disable;
u32 cc_gc_shader_pipe_config;
u32 tmp;
int i, j;
@@ -1939,29 +1938,20 @@
}
tiling_config |= BANK_SWAPS(1);
- cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE) & 0x00ff0000;
- tmp = R6XX_MAX_BACKENDS -
- r600_count_pipe_bits((cc_rb_backend_disable >> 16) & R6XX_MAX_BACKENDS_MASK);
- if (tmp < rdev->config.r600.max_backends) {
- rdev->config.r600.max_backends = tmp;
- }
-
cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG) & 0x00ffff00;
- tmp = R6XX_MAX_PIPES -
- r600_count_pipe_bits((cc_gc_shader_pipe_config >> 8) & R6XX_MAX_PIPES_MASK);
- if (tmp < rdev->config.r600.max_pipes) {
- rdev->config.r600.max_pipes = tmp;
- }
- tmp = R6XX_MAX_SIMDS -
- r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R6XX_MAX_SIMDS_MASK);
- if (tmp < rdev->config.r600.max_simds) {
- rdev->config.r600.max_simds = tmp;
- }
tmp = rdev->config.r600.max_simds -
r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R6XX_MAX_SIMDS_MASK);
rdev->config.r600.active_simds = tmp;
disabled_rb_mask = (RREG32(CC_RB_BACKEND_DISABLE) >> 16) & R6XX_MAX_BACKENDS_MASK;
+ tmp = 0;
+ for (i = 0; i < rdev->config.r600.max_backends; i++)
+ tmp |= (1 << i);
+ /* if all the backends are disabled, fix it up here */
+ if ((disabled_rb_mask & tmp) == tmp) {
+ for (i = 0; i < rdev->config.r600.max_backends; i++)
+ disabled_rb_mask &= ~(1 << i);
+ }
tmp = (tiling_config & PIPE_TILING__MASK) >> PIPE_TILING__SHIFT;
tmp = r6xx_remap_render_backend(rdev, tmp, rdev->config.r600.max_backends,
R6XX_MAX_BACKENDS, disabled_rb_mask);
@@ -2547,7 +2537,7 @@
radeon_ring_write(ring, PACKET3_ME_INITIALIZE_DEVICE_ID(1));
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 0);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
cp_me = 0xff;
WREG32(R_0086D8_CP_ME_CNTL, cp_me);
@@ -2683,7 +2673,7 @@
radeon_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1));
radeon_ring_write(ring, ((scratch - PACKET3_SET_CONFIG_REG_OFFSET) >> 2));
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
tmp = RREG32(scratch);
if (tmp == 0xDEADBEEF)
@@ -2753,6 +2743,17 @@
}
}
+/**
+ * r600_semaphore_ring_emit - emit a semaphore on the CP ring
+ *
+ * @rdev: radeon_device pointer
+ * @ring: radeon ring buffer object
+ * @semaphore: radeon semaphore object
+ * @emit_wait: Is this a sempahore wait?
+ *
+ * Emits a semaphore signal/wait packet to the CP ring and prevents the PFP
+ * from running ahead of semaphore waits.
+ */
bool r600_semaphore_ring_emit(struct radeon_device *rdev,
struct radeon_ring *ring,
struct radeon_semaphore *semaphore,
@@ -2768,6 +2769,13 @@
radeon_ring_write(ring, lower_32_bits(addr));
radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);
+ /* PFP_SYNC_ME packet only exists on 7xx+ */
+ if (emit_wait && (rdev->family >= CHIP_RV770)) {
+ /* Prevent the PFP from running ahead of the semaphore wait */
+ radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
+ radeon_ring_write(ring, 0x0);
+ }
+
return true;
}
@@ -2845,7 +2853,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
@@ -3165,7 +3173,7 @@
ib.ptr[1] = ((scratch - PACKET3_SET_CONFIG_REG_OFFSET) >> 2);
ib.ptr[2] = 0xDEADBEEF;
ib.length_dw = 3;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
DRM_ERROR("radeon: failed to schedule ib (%d).\n", r);
goto free_ib;
diff --git a/drivers/gpu/drm/radeon/r600_dma.c b/drivers/gpu/drm/radeon/r600_dma.c
index 4969cef..51fd985 100644
--- a/drivers/gpu/drm/radeon/r600_dma.c
+++ b/drivers/gpu/drm/radeon/r600_dma.c
@@ -261,7 +261,7 @@
radeon_ring_write(ring, rdev->vram_scratch.gpu_addr & 0xfffffffc);
radeon_ring_write(ring, upper_32_bits(rdev->vram_scratch.gpu_addr) & 0xff);
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
tmp = readl(ptr);
@@ -368,7 +368,7 @@
ib.ptr[3] = 0xDEADBEEF;
ib.length_dw = 4;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
radeon_ib_free(rdev, &ib);
DRM_ERROR("radeon: failed to schedule ib (%d).\n", r);
@@ -493,7 +493,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index f94e7a9..0c4a7d8 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -1597,6 +1597,7 @@
*/
# define PACKET3_CP_DMA_CMD_SAIC (1 << 28)
# define PACKET3_CP_DMA_CMD_DAIC (1 << 29)
+#define PACKET3_PFP_SYNC_ME 0x42 /* r7xx+ only */
#define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
# define PACKET3_FULL_CACHE_ENA (1 << 20) /* r7xx+ only */
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 9e1732e..5f05b4c 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -105,6 +105,7 @@
extern int radeon_vm_block_size;
extern int radeon_deep_color;
extern int radeon_use_pflipirq;
+extern int radeon_bapm;
/*
* Copy from radeon_drv.h so we don't have to include both and have conflicting
@@ -914,6 +915,8 @@
u64 vram_base_offset;
/* is vm enabled? */
bool enabled;
+ /* for hw to save the PD addr on suspend/resume */
+ uint32_t saved_table_addr[RADEON_NUM_VM];
};
/*
@@ -967,7 +970,7 @@
unsigned size);
void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib *ib);
int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib,
- struct radeon_ib *const_ib);
+ struct radeon_ib *const_ib, bool hdp_flush);
int radeon_ib_pool_init(struct radeon_device *rdev);
void radeon_ib_pool_fini(struct radeon_device *rdev);
int radeon_ib_ring_tests(struct radeon_device *rdev);
@@ -977,8 +980,10 @@
void radeon_ring_free_size(struct radeon_device *rdev, struct radeon_ring *cp);
int radeon_ring_alloc(struct radeon_device *rdev, struct radeon_ring *cp, unsigned ndw);
int radeon_ring_lock(struct radeon_device *rdev, struct radeon_ring *cp, unsigned ndw);
-void radeon_ring_commit(struct radeon_device *rdev, struct radeon_ring *cp);
-void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *cp);
+void radeon_ring_commit(struct radeon_device *rdev, struct radeon_ring *cp,
+ bool hdp_flush);
+void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *cp,
+ bool hdp_flush);
void radeon_ring_undo(struct radeon_ring *ring);
void radeon_ring_unlock_undo(struct radeon_device *rdev, struct radeon_ring *cp);
int radeon_ring_test(struct radeon_device *rdev, struct radeon_ring *cp);
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index ee712c1..83f382e 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -132,7 +132,8 @@
* the buffers used for read only, which doubles the range
* to 0 to 31. 32 is reserved for the kernel driver.
*/
- priority = (r->flags & 0xf) * 2 + !!r->write_domain;
+ priority = (r->flags & RADEON_RELOC_PRIO_MASK) * 2
+ + !!r->write_domain;
/* the first reloc of an UVD job is the msg and that must be in
VRAM, also but everything into VRAM on AGP cards to avoid
@@ -450,7 +451,7 @@
radeon_vce_note_usage(rdev);
radeon_cs_sync_rings(parser);
- r = radeon_ib_schedule(rdev, &parser->ib, NULL);
+ r = radeon_ib_schedule(rdev, &parser->ib, NULL, true);
if (r) {
DRM_ERROR("Failed to schedule IB !\n");
}
@@ -541,9 +542,9 @@
if ((rdev->family >= CHIP_TAHITI) &&
(parser->chunk_const_ib_idx != -1)) {
- r = radeon_ib_schedule(rdev, &parser->ib, &parser->const_ib);
+ r = radeon_ib_schedule(rdev, &parser->ib, &parser->const_ib, true);
} else {
- r = radeon_ib_schedule(rdev, &parser->ib, NULL);
+ r = radeon_ib_schedule(rdev, &parser->ib, NULL, true);
}
out:
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index c8ea050..6a219bc 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1680,8 +1680,8 @@
radeon_save_bios_scratch_regs(rdev);
/* block TTM */
resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
- radeon_pm_suspend(rdev);
radeon_suspend(rdev);
+ radeon_hpd_fini(rdev);
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
ring_sizes[i] = radeon_ring_backup(rdev, &rdev->ring[i],
@@ -1726,9 +1726,39 @@
}
}
- radeon_pm_resume(rdev);
+ if ((rdev->pm.pm_method == PM_METHOD_DPM) && rdev->pm.dpm_enabled) {
+ /* do dpm late init */
+ r = radeon_pm_late_init(rdev);
+ if (r) {
+ rdev->pm.dpm_enabled = false;
+ DRM_ERROR("radeon_pm_late_init failed, disabling dpm\n");
+ }
+ } else {
+ /* resume old pm late */
+ radeon_pm_resume(rdev);
+ }
+
+ /* init dig PHYs, disp eng pll */
+ if (rdev->is_atom_bios) {
+ radeon_atom_encoder_init(rdev);
+ radeon_atom_disp_eng_pll_init(rdev);
+ /* turn on the BL */
+ if (rdev->mode_info.bl_encoder) {
+ u8 bl_level = radeon_get_backlight_level(rdev,
+ rdev->mode_info.bl_encoder);
+ radeon_set_backlight_level(rdev, rdev->mode_info.bl_encoder,
+ bl_level);
+ }
+ }
+ /* reset hpd state */
+ radeon_hpd_init(rdev);
+
drm_helper_resume_force_mode(rdev->ddev);
+ /* set the power state here in case we are a PX system or headless */
+ if ((rdev->pm.pm_method == PM_METHOD_DPM) && rdev->pm.dpm_enabled)
+ radeon_pm_compute_clocks(rdev);
+
ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
if (r) {
/* bad news, how to tell it to userspace ? */
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 092d067..8df8889 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -180,6 +180,7 @@
int radeon_vm_block_size = -1;
int radeon_deep_color = 0;
int radeon_use_pflipirq = 2;
+int radeon_bapm = -1;
MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
module_param_named(no_wb, radeon_no_wb, int, 0444);
@@ -259,6 +260,9 @@
MODULE_PARM_DESC(use_pflipirq, "Pflip irqs for pageflip completion (0 = disable, 1 = as fallback, 2 = exclusive (default))");
module_param_named(use_pflipirq, radeon_use_pflipirq, int, 0444);
+MODULE_PARM_DESC(bapm, "BAPM support (1 = enable, 0 = disable, -1 = auto)");
+module_param_named(bapm, radeon_bapm, int, 0444);
+
static struct pci_device_id pciidlist[] = {
radeon_PCI_IDS
};
diff --git a/drivers/gpu/drm/radeon/radeon_ib.c b/drivers/gpu/drm/radeon/radeon_ib.c
index 65b0c21..5bf2c0a 100644
--- a/drivers/gpu/drm/radeon/radeon_ib.c
+++ b/drivers/gpu/drm/radeon/radeon_ib.c
@@ -107,6 +107,7 @@
* @rdev: radeon_device pointer
* @ib: IB object to schedule
* @const_ib: Const IB to schedule (SI only)
+ * @hdp_flush: Whether or not to perform an HDP cache flush
*
* Schedule an IB on the associated ring (all asics).
* Returns 0 on success, error on failure.
@@ -122,7 +123,7 @@
* to SI there was just a DE IB.
*/
int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib,
- struct radeon_ib *const_ib)
+ struct radeon_ib *const_ib, bool hdp_flush)
{
struct radeon_ring *ring = &rdev->ring[ib->ring];
int r = 0;
@@ -176,7 +177,7 @@
if (ib->vm)
radeon_vm_fence(rdev, ib->vm, ib->fence);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, hdp_flush);
return 0;
}
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 23314be..164898b 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -460,10 +460,6 @@
struct radeon_device *rdev = ddev->dev_private;
enum radeon_pm_state_type pm = rdev->pm.dpm.user_state;
- if ((rdev->flags & RADEON_IS_PX) &&
- (ddev->switch_power_state != DRM_SWITCH_POWER_ON))
- return snprintf(buf, PAGE_SIZE, "off\n");
-
return snprintf(buf, PAGE_SIZE, "%s\n",
(pm == POWER_STATE_TYPE_BATTERY) ? "battery" :
(pm == POWER_STATE_TYPE_BALANCED) ? "balanced" : "performance");
@@ -477,11 +473,6 @@
struct drm_device *ddev = dev_get_drvdata(dev);
struct radeon_device *rdev = ddev->dev_private;
- /* Can't set dpm state when the card is off */
- if ((rdev->flags & RADEON_IS_PX) &&
- (ddev->switch_power_state != DRM_SWITCH_POWER_ON))
- return -EINVAL;
-
mutex_lock(&rdev->pm.mutex);
if (strncmp("battery", buf, strlen("battery")) == 0)
rdev->pm.dpm.user_state = POWER_STATE_TYPE_BATTERY;
@@ -495,7 +486,12 @@
goto fail;
}
mutex_unlock(&rdev->pm.mutex);
- radeon_pm_compute_clocks(rdev);
+
+ /* Can't set dpm state when the card is off */
+ if (!(rdev->flags & RADEON_IS_PX) ||
+ (ddev->switch_power_state == DRM_SWITCH_POWER_ON))
+ radeon_pm_compute_clocks(rdev);
+
fail:
return count;
}
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 5b4e0cf..d656079 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -177,16 +177,18 @@
*
* @rdev: radeon_device pointer
* @ring: radeon_ring structure holding ring information
+ * @hdp_flush: Whether or not to perform an HDP cache flush
*
* Update the wptr (write pointer) to tell the GPU to
* execute new commands on the ring buffer (all asics).
*/
-void radeon_ring_commit(struct radeon_device *rdev, struct radeon_ring *ring)
+void radeon_ring_commit(struct radeon_device *rdev, struct radeon_ring *ring,
+ bool hdp_flush)
{
/* If we are emitting the HDP flush via the ring buffer, we need to
* do it before padding.
*/
- if (rdev->asic->ring[ring->idx]->hdp_flush)
+ if (hdp_flush && rdev->asic->ring[ring->idx]->hdp_flush)
rdev->asic->ring[ring->idx]->hdp_flush(rdev, ring);
/* We pad to match fetch size */
while (ring->wptr & ring->align_mask) {
@@ -196,7 +198,7 @@
/* If we are emitting the HDP flush via MMIO, we need to do it after
* all CPU writes to VRAM finished.
*/
- if (rdev->asic->mmio_hdp_flush)
+ if (hdp_flush && rdev->asic->mmio_hdp_flush)
rdev->asic->mmio_hdp_flush(rdev);
radeon_ring_set_wptr(rdev, ring);
}
@@ -207,12 +209,14 @@
*
* @rdev: radeon_device pointer
* @ring: radeon_ring structure holding ring information
+ * @hdp_flush: Whether or not to perform an HDP cache flush
*
* Call radeon_ring_commit() then unlock the ring (all asics).
*/
-void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *ring)
+void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *ring,
+ bool hdp_flush)
{
- radeon_ring_commit(rdev, ring);
+ radeon_ring_commit(rdev, ring, hdp_flush);
mutex_unlock(&rdev->ring_lock);
}
@@ -372,7 +376,7 @@
radeon_ring_write(ring, data[i]);
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
kfree(data);
return 0;
}
@@ -400,9 +404,7 @@
/* Allocate ring buffer */
if (ring->ring_obj == NULL) {
r = radeon_bo_create(rdev, ring->ring_size, PAGE_SIZE, true,
- RADEON_GEM_DOMAIN_GTT,
- (rdev->flags & RADEON_IS_PCIE) ?
- RADEON_GEM_GTT_WC : 0,
+ RADEON_GEM_DOMAIN_GTT, 0,
NULL, &ring->ring_obj);
if (r) {
dev_err(rdev->dev, "(%d) ring create failed\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_semaphore.c b/drivers/gpu/drm/radeon/radeon_semaphore.c
index dbd6bcd..56d9fd6 100644
--- a/drivers/gpu/drm/radeon/radeon_semaphore.c
+++ b/drivers/gpu/drm/radeon/radeon_semaphore.c
@@ -179,7 +179,7 @@
continue;
}
- radeon_ring_commit(rdev, &rdev->ring[i]);
+ radeon_ring_commit(rdev, &rdev->ring[i], false);
radeon_fence_note_sync(fence, ring);
semaphore->gpu_addr += 8;
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
index 5adf420..17bc3dc 100644
--- a/drivers/gpu/drm/radeon/radeon_test.c
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -288,7 +288,7 @@
return r;
}
radeon_fence_emit(rdev, fence, ring->idx);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
}
return 0;
}
@@ -313,7 +313,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_wait(rdev, ringA->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringA);
+ radeon_ring_unlock_commit(rdev, ringA, false);
r = radeon_test_create_and_emit_fence(rdev, ringA, &fence1);
if (r)
@@ -325,7 +325,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_wait(rdev, ringA->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringA);
+ radeon_ring_unlock_commit(rdev, ringA, false);
r = radeon_test_create_and_emit_fence(rdev, ringA, &fence2);
if (r)
@@ -344,7 +344,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_signal(rdev, ringB->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringB);
+ radeon_ring_unlock_commit(rdev, ringB, false);
r = radeon_fence_wait(fence1, false);
if (r) {
@@ -365,7 +365,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_signal(rdev, ringB->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringB);
+ radeon_ring_unlock_commit(rdev, ringB, false);
r = radeon_fence_wait(fence2, false);
if (r) {
@@ -408,7 +408,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_wait(rdev, ringA->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringA);
+ radeon_ring_unlock_commit(rdev, ringA, false);
r = radeon_test_create_and_emit_fence(rdev, ringA, &fenceA);
if (r)
@@ -420,7 +420,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_wait(rdev, ringB->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringB);
+ radeon_ring_unlock_commit(rdev, ringB, false);
r = radeon_test_create_and_emit_fence(rdev, ringB, &fenceB);
if (r)
goto out_cleanup;
@@ -442,7 +442,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_signal(rdev, ringC->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringC);
+ radeon_ring_unlock_commit(rdev, ringC, false);
for (i = 0; i < 30; ++i) {
mdelay(100);
@@ -468,7 +468,7 @@
goto out_cleanup;
}
radeon_semaphore_emit_signal(rdev, ringC->idx, semaphore);
- radeon_ring_unlock_commit(rdev, ringC);
+ radeon_ring_unlock_commit(rdev, ringC, false);
mdelay(1000);
diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index 6bf55ec..341848a 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -646,7 +646,7 @@
ib.ptr[i] = PACKET2(0);
ib.length_dw = 16;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r)
goto err;
ttm_eu_fence_buffer_objects(&ticket, &head, ib.fence);
diff --git a/drivers/gpu/drm/radeon/radeon_vce.c b/drivers/gpu/drm/radeon/radeon_vce.c
index f9b70a4..c7190aa 100644
--- a/drivers/gpu/drm/radeon/radeon_vce.c
+++ b/drivers/gpu/drm/radeon/radeon_vce.c
@@ -368,7 +368,7 @@
for (i = ib.length_dw; i < ib_size_dw; ++i)
ib.ptr[i] = 0x0;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
DRM_ERROR("radeon: failed to schedule ib (%d).\n", r);
}
@@ -425,7 +425,7 @@
for (i = ib.length_dw; i < ib_size_dw; ++i)
ib.ptr[i] = 0x0;
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
DRM_ERROR("radeon: failed to schedule ib (%d).\n", r);
}
@@ -715,7 +715,7 @@
return r;
}
radeon_ring_write(ring, VCE_CMD_END);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
if (vce_v1_0_get_rptr(rdev, ring) != rptr)
diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
index ccae4d9..088ffdc 100644
--- a/drivers/gpu/drm/radeon/radeon_vm.c
+++ b/drivers/gpu/drm/radeon/radeon_vm.c
@@ -420,7 +420,7 @@
radeon_asic_vm_pad_ib(rdev, &ib);
WARN_ON(ib.length_dw > 64);
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r)
goto error;
@@ -483,6 +483,10 @@
/* add a clone of the bo_va to clear the old address */
struct radeon_bo_va *tmp;
tmp = kzalloc(sizeof(struct radeon_bo_va), GFP_KERNEL);
+ if (!tmp) {
+ mutex_unlock(&vm->mutex);
+ return -ENOMEM;
+ }
tmp->it.start = bo_va->it.start;
tmp->it.last = bo_va->it.last;
tmp->vm = vm;
@@ -693,7 +697,7 @@
radeon_semaphore_sync_to(ib.semaphore, pd->tbo.sync_obj);
radeon_semaphore_sync_to(ib.semaphore, vm->last_id_use);
WARN_ON(ib.length_dw > ndw);
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
radeon_ib_free(rdev, &ib);
return r;
@@ -957,7 +961,7 @@
WARN_ON(ib.length_dw > ndw);
radeon_semaphore_sync_to(ib.semaphore, vm->fence);
- r = radeon_ib_schedule(rdev, &ib, NULL);
+ r = radeon_ib_schedule(rdev, &ib, NULL, false);
if (r) {
radeon_ib_free(rdev, &ib);
return r;
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 3e21e86..8a477bf 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -124,7 +124,7 @@
radeon_ring_write(ring, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST);
radeon_ring_write(ring, PACKET0(0x20C8, 0));
radeon_ring_write(ring, 0);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
}
int rv515_mc_wait_for_idle(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 2983f17..d9f5ce7 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1177,7 +1177,6 @@
u32 hdp_host_path_cntl;
u32 sq_dyn_gpr_size_simd_ab_0;
u32 gb_tiling_config = 0;
- u32 cc_rb_backend_disable = 0;
u32 cc_gc_shader_pipe_config = 0;
u32 mc_arb_ramcfg;
u32 db_debug4, tmp;
@@ -1311,21 +1310,7 @@
WREG32(SPI_CONFIG_CNTL, 0);
}
- cc_rb_backend_disable = RREG32(CC_RB_BACKEND_DISABLE) & 0x00ff0000;
- tmp = R7XX_MAX_BACKENDS - r600_count_pipe_bits(cc_rb_backend_disable >> 16);
- if (tmp < rdev->config.rv770.max_backends) {
- rdev->config.rv770.max_backends = tmp;
- }
-
cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG) & 0xffffff00;
- tmp = R7XX_MAX_PIPES - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 8) & R7XX_MAX_PIPES_MASK);
- if (tmp < rdev->config.rv770.max_pipes) {
- rdev->config.rv770.max_pipes = tmp;
- }
- tmp = R7XX_MAX_SIMDS - r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R7XX_MAX_SIMDS_MASK);
- if (tmp < rdev->config.rv770.max_simds) {
- rdev->config.rv770.max_simds = tmp;
- }
tmp = rdev->config.rv770.max_simds -
r600_count_pipe_bits((cc_gc_shader_pipe_config >> 16) & R7XX_MAX_SIMDS_MASK);
rdev->config.rv770.active_simds = tmp;
@@ -1348,6 +1333,14 @@
rdev->config.rv770.tiling_npipes = rdev->config.rv770.max_tile_pipes;
disabled_rb_mask = (RREG32(CC_RB_BACKEND_DISABLE) >> 16) & R7XX_MAX_BACKENDS_MASK;
+ tmp = 0;
+ for (i = 0; i < rdev->config.rv770.max_backends; i++)
+ tmp |= (1 << i);
+ /* if all the backends are disabled, fix it up here */
+ if ((disabled_rb_mask & tmp) == tmp) {
+ for (i = 0; i < rdev->config.rv770.max_backends; i++)
+ disabled_rb_mask &= ~(1 << i);
+ }
tmp = (gb_tiling_config & PIPE_TILING__MASK) >> PIPE_TILING__SHIFT;
tmp = r6xx_remap_render_backend(rdev, tmp, rdev->config.rv770.max_backends,
R7XX_MAX_BACKENDS, disabled_rb_mask);
diff --git a/drivers/gpu/drm/radeon/rv770_dma.c b/drivers/gpu/drm/radeon/rv770_dma.c
index bbf2e07..74426ac 100644
--- a/drivers/gpu/drm/radeon/rv770_dma.c
+++ b/drivers/gpu/drm/radeon/rv770_dma.c
@@ -90,7 +90,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 011779b..6bce408 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -3057,7 +3057,7 @@
u32 sx_debug_1;
u32 hdp_host_path_cntl;
u32 tmp;
- int i, j, k;
+ int i, j;
switch (rdev->family) {
case CHIP_TAHITI:
@@ -3255,12 +3255,11 @@
rdev->config.si.max_sh_per_se,
rdev->config.si.max_cu_per_sh);
+ rdev->config.si.active_cus = 0;
for (i = 0; i < rdev->config.si.max_shader_engines; i++) {
for (j = 0; j < rdev->config.si.max_sh_per_se; j++) {
- for (k = 0; k < rdev->config.si.max_cu_per_sh; k++) {
- rdev->config.si.active_cus +=
- hweight32(si_get_cu_active_bitmap(rdev, i, j));
- }
+ rdev->config.si.active_cus +=
+ hweight32(si_get_cu_active_bitmap(rdev, i, j));
}
}
@@ -3541,7 +3540,7 @@
radeon_ring_write(ring, PACKET3_BASE_INDEX(CE_PARTITION_BASE));
radeon_ring_write(ring, 0xc000);
radeon_ring_write(ring, 0xe000);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
si_cp_enable(rdev, true);
@@ -3570,7 +3569,7 @@
radeon_ring_write(ring, 0x0000000e); /* VGT_VERTEX_REUSE_BLOCK_CNTL */
radeon_ring_write(ring, 0x00000010); /* VGT_OUT_DEALLOC_CNTL */
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = RADEON_RING_TYPE_GFX_INDEX; i <= CAYMAN_RING_TYPE_CP2_INDEX; ++i) {
ring = &rdev->ring[i];
@@ -3580,7 +3579,7 @@
radeon_ring_write(ring, PACKET3_COMPUTE(PACKET3_CLEAR_STATE, 0));
radeon_ring_write(ring, 0);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
}
return 0;
@@ -4291,10 +4290,10 @@
for (i = 1; i < 16; i++) {
if (i < 8)
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
- rdev->gart.table_addr >> 12);
+ rdev->vm_manager.saved_table_addr[i]);
else
WREG32(VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2),
- rdev->gart.table_addr >> 12);
+ rdev->vm_manager.saved_table_addr[i]);
}
/* enable context1-15 */
@@ -4326,6 +4325,17 @@
static void si_pcie_gart_disable(struct radeon_device *rdev)
{
+ unsigned i;
+
+ for (i = 1; i < 16; ++i) {
+ uint32_t reg;
+ if (i < 8)
+ reg = VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2);
+ else
+ reg = VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2);
+ rdev->vm_manager.saved_table_addr[i] = RREG32(reg);
+ }
+
/* Disable all tables */
WREG32(VM_CONTEXT0_CNTL, 0);
WREG32(VM_CONTEXT1_CNTL, 0);
@@ -5028,7 +5038,7 @@
/* flush hdp cache */
radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(1) |
WRITE_DATA_DST_SEL(0)));
radeon_ring_write(ring, HDP_MEM_COHERENCY_FLUSH_CNTL >> 2);
radeon_ring_write(ring, 0);
@@ -5036,7 +5046,7 @@
/* bits 0-15 are the VM contexts0-15 */
radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(1) |
WRITE_DATA_DST_SEL(0)));
radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
radeon_ring_write(ring, 0);
@@ -7178,6 +7188,9 @@
int ret, i;
u16 tmp16;
+ if (pci_is_root_bus(rdev->pdev->bus))
+ return;
+
if (radeon_pcie_gen2 == 0)
return;
@@ -7455,7 +7468,8 @@
if (orig != data)
WREG32_PIF_PHY1(PB1_PIF_CNTL, data);
- if (!disable_clkreq) {
+ if (!disable_clkreq &&
+ !pci_is_root_bus(rdev->pdev->bus)) {
struct pci_dev *root = rdev->pdev->bus->self;
u32 lnkcap;
diff --git a/drivers/gpu/drm/radeon/si_dma.c b/drivers/gpu/drm/radeon/si_dma.c
index 7165051..7c22baa 100644
--- a/drivers/gpu/drm/radeon/si_dma.c
+++ b/drivers/gpu/drm/radeon/si_dma.c
@@ -275,7 +275,7 @@
return r;
}
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
radeon_semaphore_free(rdev, &sem, *fence);
return r;
diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c
index 32e50be..57f7800 100644
--- a/drivers/gpu/drm/radeon/trinity_dpm.c
+++ b/drivers/gpu/drm/radeon/trinity_dpm.c
@@ -1874,16 +1874,22 @@
for (i = 0; i < SUMO_MAX_HARDWARE_POWERLEVELS; i++)
pi->at[i] = TRINITY_AT_DFLT;
- /* There are stability issues reported on with
- * bapm enabled when switching between AC and battery
- * power. At the same time, some MSI boards hang
- * if it's not enabled and dpm is enabled. Just enable
- * it for MSI boards right now.
- */
- if (rdev->pdev->subsystem_vendor == 0x1462)
- pi->enable_bapm = true;
- else
+ if (radeon_bapm == -1) {
+ /* There are stability issues reported on with
+ * bapm enabled when switching between AC and battery
+ * power. At the same time, some MSI boards hang
+ * if it's not enabled and dpm is enabled. Just enable
+ * it for MSI boards right now.
+ */
+ if (rdev->pdev->subsystem_vendor == 0x1462)
+ pi->enable_bapm = true;
+ else
+ pi->enable_bapm = false;
+ } else if (radeon_bapm == 0) {
pi->enable_bapm = false;
+ } else {
+ pi->enable_bapm = true;
+ }
pi->enable_nbps_policy = true;
pi->enable_sclk_ds = true;
pi->enable_gfx_power_gating = true;
diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c
index be42c81..cda3913 100644
--- a/drivers/gpu/drm/radeon/uvd_v1_0.c
+++ b/drivers/gpu/drm/radeon/uvd_v1_0.c
@@ -124,7 +124,7 @@
radeon_ring_write(ring, PACKET0(UVD_SEMA_CNTL, 0));
radeon_ring_write(ring, 3);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
done:
/* lower clocks again */
@@ -331,7 +331,7 @@
}
radeon_ring_write(ring, PACKET0(UVD_CONTEXT_ID, 0));
radeon_ring_write(ring, 0xDEADBEEF);
- radeon_ring_unlock_commit(rdev, ring);
+ radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
tmp = RREG32(UVD_CONTEXT_ID);
if (tmp == 0xDEADBEEF)
diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig
index 2d9d425..ae8850f 100644
--- a/drivers/gpu/drm/sti/Kconfig
+++ b/drivers/gpu/drm/sti/Kconfig
@@ -1,6 +1,7 @@
config DRM_STI
tristate "DRM Support for STMicroelectronics SoC stiH41x Series"
depends on DRM && (SOC_STIH415 || SOC_STIH416 || ARCH_MULTIPLATFORM)
+ select RESET_CONTROLLER
select DRM_KMS_HELPER
select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
diff --git a/drivers/gpu/drm/sti/sti_drm_drv.c b/drivers/gpu/drm/sti/sti_drm_drv.c
index a7cc249..223d93c 100644
--- a/drivers/gpu/drm/sti/sti_drm_drv.c
+++ b/drivers/gpu/drm/sti/sti_drm_drv.c
@@ -201,8 +201,8 @@
master = platform_device_register_resndata(dev,
DRIVER_NAME "__master", -1,
NULL, 0, NULL, 0);
- if (!master)
- return -EINVAL;
+ if (IS_ERR(master))
+ return PTR_ERR(master);
platform_set_drvdata(pdev, master);
return 0;
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index 72d957f..2ae9a9b 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -730,16 +730,16 @@
return -ENOMEM;
}
hda->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
- if (IS_ERR(hda->regs))
- return PTR_ERR(hda->regs);
+ if (!hda->regs)
+ return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"video-dacs-ctrl");
if (res) {
hda->video_dacs_ctrl = devm_ioremap_nocache(dev, res->start,
resource_size(res));
- if (IS_ERR(hda->video_dacs_ctrl))
- return PTR_ERR(hda->video_dacs_ctrl);
+ if (!hda->video_dacs_ctrl)
+ return -ENOMEM;
} else {
/* If no existing video-dacs-ctrl resource continue the probe */
DRM_DEBUG_DRIVER("No video-dacs-ctrl resource\n");
@@ -770,7 +770,7 @@
return 0;
}
-static struct of_device_id hda_of_match[] = {
+static const struct of_device_id hda_of_match[] = {
{ .compatible = "st,stih416-hda", },
{ .compatible = "st,stih407-hda", },
{ /* end node */ }
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index 284e541..ef93156 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -677,7 +677,7 @@
.unbind = sti_hdmi_unbind,
};
-static struct of_device_id hdmi_of_match[] = {
+static const struct of_device_id hdmi_of_match[] = {
{
.compatible = "st,stih416-hdmi",
.data = &tx3g0c55phy_ops,
@@ -713,8 +713,8 @@
return -ENOMEM;
}
hdmi->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
- if (IS_ERR(hdmi->regs))
- return PTR_ERR(hdmi->regs);
+ if (!hdmi->regs)
+ return -ENOMEM;
if (of_device_is_compatible(np, "st,stih416-hdmi")) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
@@ -725,8 +725,8 @@
}
hdmi->syscfg = devm_ioremap_nocache(dev, res->start,
resource_size(res));
- if (IS_ERR(hdmi->syscfg))
- return PTR_ERR(hdmi->syscfg);
+ if (!hdmi->syscfg)
+ return -ENOMEM;
}
diff --git a/drivers/gpu/drm/sti/sti_tvout.c b/drivers/gpu/drm/sti/sti_tvout.c
index b69e26f..b8afe49 100644
--- a/drivers/gpu/drm/sti/sti_tvout.c
+++ b/drivers/gpu/drm/sti/sti_tvout.c
@@ -591,8 +591,8 @@
return -ENOMEM;
}
tvout->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
- if (IS_ERR(tvout->regs))
- return PTR_ERR(tvout->regs);
+ if (!tvout->regs)
+ return -ENOMEM;
/* get reset resources */
tvout->reset = devm_reset_control_get(dev, "tvout");
@@ -624,7 +624,7 @@
return 0;
}
-static struct of_device_id tvout_of_match[] = {
+static const struct of_device_id tvout_of_match[] = {
{ .compatible = "st,stih416-tvout", },
{ .compatible = "st,stih407-tvout", },
{ /* end node */ }
diff --git a/drivers/hid/hid-cherry.c b/drivers/hid/hid-cherry.c
index 1bdcccc..f745d2c 100644
--- a/drivers/hid/hid-cherry.c
+++ b/drivers/hid/hid-cherry.c
@@ -28,7 +28,7 @@
static __u8 *ch_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
+ if (*rsize >= 18 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
hid_info(hdev, "fixing up Cherry Cymotion report descriptor\n");
rdesc[11] = rdesc[16] = 0xff;
rdesc[12] = rdesc[17] = 0x03;
diff --git a/drivers/hid/hid-huion.c b/drivers/hid/hid-huion.c
index 60f44cd..61b68ca 100644
--- a/drivers/hid/hid-huion.c
+++ b/drivers/hid/hid-huion.c
@@ -84,6 +84,15 @@
0xC0 /* End Collection */
};
+/* Parameter indices */
+enum huion_prm {
+ HUION_PRM_X_LM = 1,
+ HUION_PRM_Y_LM = 2,
+ HUION_PRM_PRESSURE_LM = 4,
+ HUION_PRM_RESOLUTION = 5,
+ HUION_PRM_NUM
+};
+
/* Driver data */
struct huion_drvdata {
__u8 *rdesc;
@@ -115,7 +124,12 @@
int rc;
struct usb_device *usb_dev = hid_to_usb_dev(hdev);
struct huion_drvdata *drvdata = hid_get_drvdata(hdev);
- __le16 buf[6];
+ __le16 *buf = NULL;
+ size_t len;
+ s32 params[HUION_PH_ID_NUM];
+ s32 resolution;
+ __u8 *p;
+ s32 v;
/*
* Read string descriptor containing tablet parameters. The specific
@@ -123,65 +137,79 @@
* driver traffic.
* NOTE: This enables fully-functional tablet mode.
*/
+ len = HUION_PRM_NUM * sizeof(*buf);
+ buf = kmalloc(len, GFP_KERNEL);
+ if (buf == NULL) {
+ hid_err(hdev, "failed to allocate parameter buffer\n");
+ rc = -ENOMEM;
+ goto cleanup;
+ }
rc = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
(USB_DT_STRING << 8) + 0x64,
- 0x0409, buf, sizeof(buf),
+ 0x0409, buf, len,
USB_CTRL_GET_TIMEOUT);
- if (rc == -EPIPE)
- hid_warn(hdev, "device parameters not found\n");
- else if (rc < 0)
- hid_warn(hdev, "failed to get device parameters: %d\n", rc);
- else if (rc != sizeof(buf))
- hid_warn(hdev, "invalid device parameters\n");
- else {
- s32 params[HUION_PH_ID_NUM];
- s32 resolution;
- __u8 *p;
- s32 v;
+ if (rc == -EPIPE) {
+ hid_err(hdev, "device parameters not found\n");
+ rc = -ENODEV;
+ goto cleanup;
+ } else if (rc < 0) {
+ hid_err(hdev, "failed to get device parameters: %d\n", rc);
+ rc = -ENODEV;
+ goto cleanup;
+ } else if (rc != len) {
+ hid_err(hdev, "invalid device parameters\n");
+ rc = -ENODEV;
+ goto cleanup;
+ }
- /* Extract device parameters */
- params[HUION_PH_ID_X_LM] = le16_to_cpu(buf[1]);
- params[HUION_PH_ID_Y_LM] = le16_to_cpu(buf[2]);
- params[HUION_PH_ID_PRESSURE_LM] = le16_to_cpu(buf[4]);
- resolution = le16_to_cpu(buf[5]);
- if (resolution == 0) {
- params[HUION_PH_ID_X_PM] = 0;
- params[HUION_PH_ID_Y_PM] = 0;
+ /* Extract device parameters */
+ params[HUION_PH_ID_X_LM] = le16_to_cpu(buf[HUION_PRM_X_LM]);
+ params[HUION_PH_ID_Y_LM] = le16_to_cpu(buf[HUION_PRM_Y_LM]);
+ params[HUION_PH_ID_PRESSURE_LM] =
+ le16_to_cpu(buf[HUION_PRM_PRESSURE_LM]);
+ resolution = le16_to_cpu(buf[HUION_PRM_RESOLUTION]);
+ if (resolution == 0) {
+ params[HUION_PH_ID_X_PM] = 0;
+ params[HUION_PH_ID_Y_PM] = 0;
+ } else {
+ params[HUION_PH_ID_X_PM] = params[HUION_PH_ID_X_LM] *
+ 1000 / resolution;
+ params[HUION_PH_ID_Y_PM] = params[HUION_PH_ID_Y_LM] *
+ 1000 / resolution;
+ }
+
+ /* Allocate fixed report descriptor */
+ drvdata->rdesc = devm_kmalloc(&hdev->dev,
+ sizeof(huion_tablet_rdesc_template),
+ GFP_KERNEL);
+ if (drvdata->rdesc == NULL) {
+ hid_err(hdev, "failed to allocate fixed rdesc\n");
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ drvdata->rsize = sizeof(huion_tablet_rdesc_template);
+
+ /* Format fixed report descriptor */
+ memcpy(drvdata->rdesc, huion_tablet_rdesc_template,
+ drvdata->rsize);
+ for (p = drvdata->rdesc;
+ p <= drvdata->rdesc + drvdata->rsize - 4;) {
+ if (p[0] == 0xFE && p[1] == 0xED && p[2] == 0x1D &&
+ p[3] < sizeof(params)) {
+ v = params[p[3]];
+ put_unaligned(cpu_to_le32(v), (s32 *)p);
+ p += 4;
} else {
- params[HUION_PH_ID_X_PM] = params[HUION_PH_ID_X_LM] *
- 1000 / resolution;
- params[HUION_PH_ID_Y_PM] = params[HUION_PH_ID_Y_LM] *
- 1000 / resolution;
- }
-
- /* Allocate fixed report descriptor */
- drvdata->rdesc = devm_kmalloc(&hdev->dev,
- sizeof(huion_tablet_rdesc_template),
- GFP_KERNEL);
- if (drvdata->rdesc == NULL) {
- hid_err(hdev, "failed to allocate fixed rdesc\n");
- return -ENOMEM;
- }
- drvdata->rsize = sizeof(huion_tablet_rdesc_template);
-
- /* Format fixed report descriptor */
- memcpy(drvdata->rdesc, huion_tablet_rdesc_template,
- drvdata->rsize);
- for (p = drvdata->rdesc;
- p <= drvdata->rdesc + drvdata->rsize - 4;) {
- if (p[0] == 0xFE && p[1] == 0xED && p[2] == 0x1D &&
- p[3] < sizeof(params)) {
- v = params[p[3]];
- put_unaligned(cpu_to_le32(v), (s32 *)p);
- p += 4;
- } else {
- p++;
- }
+ p++;
}
}
- return 0;
+ rc = 0;
+
+cleanup:
+ kfree(buf);
+ return rc;
}
static int huion_probe(struct hid_device *hdev, const struct hid_device_id *id)
diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
index e776963..b92bf01 100644
--- a/drivers/hid/hid-kye.c
+++ b/drivers/hid/hid-kye.c
@@ -300,7 +300,7 @@
* - change the button usage range to 4-7 for the extra
* buttons
*/
- if (*rsize >= 74 &&
+ if (*rsize >= 75 &&
rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index a976f48..f91ff14 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -345,14 +345,14 @@
struct usb_device_descriptor *udesc;
__u16 bcdDevice, rev_maj, rev_min;
- if ((drv_data->quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 &&
+ if ((drv_data->quirks & LG_RDESC) && *rsize >= 91 && rdesc[83] == 0x26 &&
rdesc[84] == 0x8c && rdesc[85] == 0x02) {
hid_info(hdev,
"fixing up Logitech keyboard report descriptor\n");
rdesc[84] = rdesc[89] = 0x4d;
rdesc[85] = rdesc[90] = 0x10;
}
- if ((drv_data->quirks & LG_RDESC_REL_ABS) && *rsize >= 50 &&
+ if ((drv_data->quirks & LG_RDESC_REL_ABS) && *rsize >= 51 &&
rdesc[32] == 0x81 && rdesc[33] == 0x06 &&
rdesc[49] == 0x81 && rdesc[50] == 0x06) {
hid_info(hdev,
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index cc2bd20..7835717 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -451,13 +451,13 @@
drv_data = hid_get_drvdata(hid);
if (!drv_data) {
hid_err(hid, "Private driver data not found!\n");
- return 0;
+ return -EINVAL;
}
entry = drv_data->device_props;
if (!entry) {
hid_err(hid, "Device properties not found!\n");
- return 0;
+ return -EINVAL;
}
if (range == 0)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 486dbde..9bf8637 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -238,13 +238,6 @@
return;
}
- if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
- (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
- dev_err(&djrcv_hdev->dev, "%s: invalid device index:%d\n",
- __func__, dj_report->device_index);
- return;
- }
-
if (djrcv_dev->paired_dj_devices[dj_report->device_index]) {
/* The device is already known. No need to reallocate it. */
dbg_hid("%s: device is already known\n", __func__);
@@ -557,7 +550,7 @@
if (!out_buf)
return -ENOMEM;
- if (count < DJREPORT_SHORT_LENGTH - 2)
+ if (count > DJREPORT_SHORT_LENGTH - 2)
count = DJREPORT_SHORT_LENGTH - 2;
out_buf[0] = REPORT_ID_DJ_SHORT;
@@ -663,7 +656,6 @@
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
struct dj_report *dj_report = (struct dj_report *) data;
unsigned long flags;
- bool report_processed = false;
dbg_hid("%s, size:%d\n", __func__, size);
@@ -691,27 +683,41 @@
* anything else with it.
*/
+ /* case 1) */
+ if (data[0] != REPORT_ID_DJ_SHORT)
+ return false;
+
+ if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
+ (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
+ /*
+ * Device index is wrong, bail out.
+ * This driver can ignore safely the receiver notifications,
+ * so ignore those reports too.
+ */
+ if (dj_report->device_index != DJ_RECEIVER_INDEX)
+ dev_err(&hdev->dev, "%s: invalid device index:%d\n",
+ __func__, dj_report->device_index);
+ return false;
+ }
+
spin_lock_irqsave(&djrcv_dev->lock, flags);
- if (dj_report->report_id == REPORT_ID_DJ_SHORT) {
- switch (dj_report->report_type) {
- case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
- case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
- logi_dj_recv_queue_notification(djrcv_dev, dj_report);
- break;
- case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
- if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
- STATUS_LINKLOSS) {
- logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
- }
- break;
- default:
- logi_dj_recv_forward_report(djrcv_dev, dj_report);
+ switch (dj_report->report_type) {
+ case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
+ case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
+ logi_dj_recv_queue_notification(djrcv_dev, dj_report);
+ break;
+ case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
+ if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
+ STATUS_LINKLOSS) {
+ logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
}
- report_processed = true;
+ break;
+ default:
+ logi_dj_recv_forward_report(djrcv_dev, dj_report);
}
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
- return report_processed;
+ return true;
}
static int logi_dj_probe(struct hid_device *hdev,
diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h
index 4a40003..daeb0aa 100644
--- a/drivers/hid/hid-logitech-dj.h
+++ b/drivers/hid/hid-logitech-dj.h
@@ -27,6 +27,7 @@
#define DJ_MAX_PAIRED_DEVICES 6
#define DJ_MAX_NUMBER_NOTIFICATIONS 8
+#define DJ_RECEIVER_INDEX 0
#define DJ_DEVICE_INDEX_MIN 1
#define DJ_DEVICE_INDEX_MAX 6
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index ecc2cbf..29a74c1 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -290,6 +290,11 @@
if (size < 4 || ((size - 4) % 9) != 0)
return 0;
npoints = (size - 4) / 9;
+ if (npoints > 15) {
+ hid_warn(hdev, "invalid size value (%d) for TRACKPAD_REPORT_ID\n",
+ size);
+ return 0;
+ }
msc->ntouches = 0;
for (ii = 0; ii < npoints; ii++)
magicmouse_emit_touch(msc, ii, data + ii * 9 + 4);
@@ -307,6 +312,11 @@
if (size < 6 || ((size - 6) % 8) != 0)
return 0;
npoints = (size - 6) / 8;
+ if (npoints > 15) {
+ hid_warn(hdev, "invalid size value (%d) for MOUSE_REPORT_ID\n",
+ size);
+ return 0;
+ }
msc->ntouches = 0;
for (ii = 0; ii < npoints; ii++)
magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
diff --git a/drivers/hid/hid-monterey.c b/drivers/hid/hid-monterey.c
index 9e14c00..25daf28 100644
--- a/drivers/hid/hid-monterey.c
+++ b/drivers/hid/hid-monterey.c
@@ -24,7 +24,7 @@
static __u8 *mr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 30 && rdesc[29] == 0x05 && rdesc[30] == 0x09) {
+ if (*rsize >= 31 && rdesc[29] == 0x05 && rdesc[30] == 0x09) {
hid_info(hdev, "fixing up button/consumer in HID report descriptor\n");
rdesc[30] = 0x0c;
}
diff --git a/drivers/hid/hid-petalynx.c b/drivers/hid/hid-petalynx.c
index 736b250..6aca4f2 100644
--- a/drivers/hid/hid-petalynx.c
+++ b/drivers/hid/hid-petalynx.c
@@ -25,7 +25,7 @@
static __u8 *pl_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 60 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 &&
+ if (*rsize >= 62 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 &&
rdesc[41] == 0x00 && rdesc[59] == 0x26 &&
rdesc[60] == 0xf9 && rdesc[61] == 0x00) {
hid_info(hdev, "fixing up Petalynx Maxter Remote report descriptor\n");
diff --git a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c
index acbb0210..020df3c 100644
--- a/drivers/hid/hid-picolcd_core.c
+++ b/drivers/hid/hid-picolcd_core.c
@@ -350,6 +350,12 @@
if (!data)
return 1;
+ if (size > 64) {
+ hid_warn(hdev, "invalid size value (%d) for picolcd raw event\n",
+ size);
+ return 0;
+ }
+
if (report->id == REPORT_KEY_STATE) {
if (data->input_keys)
ret = picolcd_raw_keypad(data, report, raw_data+1, size-1);
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 0dc2514..8389e81 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -909,10 +909,15 @@
return ret;
}
- if (!test_bit(RMI_STARTED, &data->flags)) {
- hid_hw_stop(hdev);
- return -EIO;
- }
+ if (!test_bit(RMI_STARTED, &data->flags))
+ /*
+ * The device maybe in the bootloader if rmi_input_configured
+ * failed to find F11 in the PDT. Print an error, but don't
+ * return an error from rmi_probe so that hidraw will be
+ * accessible from userspace. That way a userspace tool
+ * can be used to reload working firmware on the touchpad.
+ */
+ hid_err(hdev, "Device failed to be properly configured\n");
return 0;
}
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index e244e44..2ac2576 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -604,9 +604,9 @@
ret = -EINVAL;
goto err_stop_hw;
}
- sd->hid_sensor_hub_client_devs = kzalloc(dev_cnt *
- sizeof(struct mfd_cell),
- GFP_KERNEL);
+ sd->hid_sensor_hub_client_devs = devm_kzalloc(&hdev->dev, dev_cnt *
+ sizeof(struct mfd_cell),
+ GFP_KERNEL);
if (sd->hid_sensor_hub_client_devs == NULL) {
hid_err(hdev, "Failed to allocate memory for mfd cells\n");
ret = -ENOMEM;
@@ -618,11 +618,12 @@
if (collection->type == HID_COLLECTION_PHYSICAL) {
- hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
+ hsdev = devm_kzalloc(&hdev->dev, sizeof(*hsdev),
+ GFP_KERNEL);
if (!hsdev) {
hid_err(hdev, "cannot allocate hid_sensor_hub_device\n");
ret = -ENOMEM;
- goto err_no_mem;
+ goto err_stop_hw;
}
hsdev->hdev = hdev;
hsdev->vendor_id = hdev->vendor;
@@ -631,13 +632,13 @@
if (last_hsdev)
last_hsdev->end_collection_index = i;
last_hsdev = hsdev;
- name = kasprintf(GFP_KERNEL, "HID-SENSOR-%x",
- collection->usage);
+ name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
+ "HID-SENSOR-%x",
+ collection->usage);
if (name == NULL) {
hid_err(hdev, "Failed MFD device name\n");
ret = -ENOMEM;
- kfree(hsdev);
- goto err_no_mem;
+ goto err_stop_hw;
}
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].id =
@@ -661,16 +662,10 @@
ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
sd->hid_sensor_client_cnt, NULL, 0, NULL);
if (ret < 0)
- goto err_no_mem;
+ goto err_stop_hw;
return ret;
-err_no_mem:
- for (i = 0; i < sd->hid_sensor_client_cnt; ++i) {
- kfree(sd->hid_sensor_hub_client_devs[i].name);
- kfree(sd->hid_sensor_hub_client_devs[i].platform_data);
- }
- kfree(sd->hid_sensor_hub_client_devs);
err_stop_hw:
hid_hw_stop(hdev);
@@ -681,7 +676,6 @@
{
struct sensor_hub_data *data = hid_get_drvdata(hdev);
unsigned long flags;
- int i;
hid_dbg(hdev, " hardware removed\n");
hid_hw_close(hdev);
@@ -691,11 +685,6 @@
complete(&data->pending.ready);
spin_unlock_irqrestore(&data->lock, flags);
mfd_remove_devices(&hdev->dev);
- for (i = 0; i < data->hid_sensor_client_cnt; ++i) {
- kfree(data->hid_sensor_hub_client_devs[i].name);
- kfree(data->hid_sensor_hub_client_devs[i].platform_data);
- }
- kfree(data->hid_sensor_hub_client_devs);
hid_set_drvdata(hdev, NULL);
mutex_destroy(&data->mutex);
}
diff --git a/drivers/hid/hid-sunplus.c b/drivers/hid/hid-sunplus.c
index 87fc91e..91072fa 100644
--- a/drivers/hid/hid-sunplus.c
+++ b/drivers/hid/hid-sunplus.c
@@ -24,7 +24,7 @@
static __u8 *sp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
- if (*rsize >= 107 && rdesc[104] == 0x26 && rdesc[105] == 0x80 &&
+ if (*rsize >= 112 && rdesc[104] == 0x26 && rdesc[105] == 0x80 &&
rdesc[106] == 0x03) {
hid_info(hdev, "fixing up Sunplus Wireless Desktop report descriptor\n");
rdesc[105] = rdesc[110] = 0x03;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 3e3b680..b51a402 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -23,17 +23,14 @@
This I2C support can also be built as a module. If so, the module
will be called i2c-core.
-config I2C_ACPI
- bool "I2C ACPI support"
- select I2C
- depends on ACPI
+config ACPI_I2C_OPREGION
+ bool "ACPI I2C Operation region support"
+ depends on I2C=y && ACPI
default y
help
- Say Y here if you want to enable ACPI I2C support. This includes support
- for automatic enumeration of I2C slave devices and support for ACPI I2C
- Operation Regions. Operation Regions allow firmware (BIOS) code to
- access I2C slave devices, such as smart batteries through an I2C host
- controller driver.
+ Say Y here if you want to enable ACPI I2C operation region support.
+ Operation Regions allow firmware (BIOS) code to access I2C slave devices,
+ such as smart batteries through an I2C host controller driver.
if I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a1f590c..e0228b2 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -3,7 +3,7 @@
#
i2ccore-y := i2c-core.o
-i2ccore-$(CONFIG_I2C_ACPI) += i2c-acpi.o
+i2ccore-$(CONFIG_ACPI) += i2c-acpi.o
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2ccore.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 2994690..10467a3 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -164,6 +164,7 @@
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -828,6 +829,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/i2c-acpi.c b/drivers/i2c/i2c-acpi.c
index e8b6196..0dbc18c 100644
--- a/drivers/i2c/i2c-acpi.c
+++ b/drivers/i2c/i2c-acpi.c
@@ -126,6 +126,7 @@
dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
}
+#ifdef CONFIG_ACPI_I2C_OPREGION
static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
u8 cmd, u8 *data, u8 data_len)
{
@@ -360,3 +361,4 @@
acpi_bus_detach_private_data(handle);
}
+#endif
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 1840531..ecb0109 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3149,14 +3149,16 @@
static void cleanup_domain(struct protection_domain *domain)
{
- struct iommu_dev_data *dev_data, *next;
+ struct iommu_dev_data *entry;
unsigned long flags;
write_lock_irqsave(&amd_iommu_devtable_lock, flags);
- list_for_each_entry_safe(dev_data, next, &domain->dev_list, list) {
- __detach_device(dev_data);
- atomic_set(&dev_data->bind, 0);
+ while (!list_empty(&domain->dev_list)) {
+ entry = list_first_entry(&domain->dev_list,
+ struct iommu_dev_data, list);
+ __detach_device(entry);
+ atomic_set(&entry->bind, 0);
}
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index d1f5caa..5619f26 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -3869,6 +3869,14 @@
action != BUS_NOTIFY_DEL_DEVICE)
return 0;
+ /*
+ * If the device is still attached to a device driver we can't
+ * tear down the domain yet as DMA mappings may still be in use.
+ * Wait for the BUS_NOTIFY_UNBOUND_DRIVER event to do that.
+ */
+ if (action == BUS_NOTIFY_DEL_DEVICE && dev->driver != NULL)
+ return 0;
+
domain = find_domain(dev);
if (!domain)
return 0;
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 1698360..ac4adb3 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -995,7 +995,7 @@
size_t orig_size = size;
int ret = 0;
- if (unlikely(domain->ops->unmap == NULL ||
+ if (unlikely(domain->ops->map == NULL ||
domain->ops->pgsize_bitmap == 0UL))
return -ENODEV;
diff --git a/drivers/isdn/hardware/eicon/xdi_msg.h b/drivers/isdn/hardware/eicon/xdi_msg.h
index 58368f7..2498c34 100644
--- a/drivers/isdn/hardware/eicon/xdi_msg.h
+++ b/drivers/isdn/hardware/eicon/xdi_msg.h
@@ -1,6 +1,6 @@
/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */
-#ifndef __DIVA_XDI_UM_CFG_MESSSGE_H__
+#ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__
#define __DIVA_XDI_UM_CFG_MESSAGE_H__
/*
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 2785007..cd15e08 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1688,6 +1688,7 @@
unsigned int key_size, opt_params;
unsigned long long tmpll;
int ret;
+ size_t iv_size_padding;
struct dm_arg_set as;
const char *opt_string;
char dummy;
@@ -1724,20 +1725,32 @@
cc->dmreq_start = sizeof(struct ablkcipher_request);
cc->dmreq_start += crypto_ablkcipher_reqsize(any_tfm(cc));
- cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment());
- cc->dmreq_start += crypto_ablkcipher_alignmask(any_tfm(cc)) &
- ~(crypto_tfm_ctx_alignment() - 1);
+ cc->dmreq_start = ALIGN(cc->dmreq_start, __alignof__(struct dm_crypt_request));
+
+ if (crypto_ablkcipher_alignmask(any_tfm(cc)) < CRYPTO_MINALIGN) {
+ /* Allocate the padding exactly */
+ iv_size_padding = -(cc->dmreq_start + sizeof(struct dm_crypt_request))
+ & crypto_ablkcipher_alignmask(any_tfm(cc));
+ } else {
+ /*
+ * If the cipher requires greater alignment than kmalloc
+ * alignment, we don't know the exact position of the
+ * initialization vector. We must assume worst case.
+ */
+ iv_size_padding = crypto_ablkcipher_alignmask(any_tfm(cc));
+ }
cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start +
- sizeof(struct dm_crypt_request) + cc->iv_size);
+ sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size);
if (!cc->req_pool) {
ti->error = "Cannot allocate crypt request mempool";
goto bad;
}
cc->per_bio_data_size = ti->per_bio_data_size =
- sizeof(struct dm_crypt_io) + cc->dmreq_start +
- sizeof(struct dm_crypt_request) + cc->iv_size;
+ ALIGN(sizeof(struct dm_crypt_io) + cc->dmreq_start +
+ sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size,
+ ARCH_KMALLOC_MINALIGN);
cc->page_pool = mempool_create_page_pool(MIN_POOL_PAGES, 0);
if (!cc->page_pool) {
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index b08c188..6703751 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2953,6 +2953,7 @@
*/
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
end_reshape(conf);
+ close_sync(conf);
return 0;
}
@@ -3081,6 +3082,7 @@
}
r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
+ r10_bio->state = 0;
raise_barrier(conf, rb2 != NULL);
atomic_set(&r10_bio->remaining, 0);
@@ -3269,6 +3271,7 @@
if (sync_blocks < max_sync)
max_sync = sync_blocks;
r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
+ r10_bio->state = 0;
r10_bio->mddev = mddev;
atomic_set(&r10_bio->remaining, 0);
@@ -4384,6 +4387,7 @@
read_more:
/* Now schedule reads for blocks from sector_nr to last */
r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
+ r10_bio->state = 0;
raise_barrier(conf, sectors_done != 0);
atomic_set(&r10_bio->remaining, 0);
r10_bio->mddev = mddev;
@@ -4398,6 +4402,7 @@
* on all the target devices.
*/
// FIXME
+ mempool_free(r10_bio, conf->r10buf_pool);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
return sectors_done;
}
@@ -4410,7 +4415,7 @@
read_bio->bi_private = r10_bio;
read_bio->bi_end_io = end_sync_read;
read_bio->bi_rw = READ;
- read_bio->bi_flags &= ~(BIO_POOL_MASK - 1);
+ read_bio->bi_flags &= (~0UL << BIO_RESET_BITS);
read_bio->bi_flags |= 1 << BIO_UPTODATE;
read_bio->bi_vcnt = 0;
read_bio->bi_iter.bi_size = 0;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6234b2e..183588b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2922,7 +2922,7 @@
(!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) &&
!test_bit(R5_OVERWRITE, &fdev[0]->flags)) ||
(sh->raid_conf->level == 6 && s->failed && s->to_write &&
- s->to_write < sh->raid_conf->raid_disks - 2 &&
+ s->to_write - s->non_overwrite < sh->raid_conf->raid_disks - 2 &&
(!test_bit(R5_Insync, &dev->flags) || test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))))) {
/* we would like to get this block, possibly by computing it,
* otherwise read it if the backing disk is insync
@@ -3817,6 +3817,8 @@
set_bit(R5_Wantwrite, &dev->flags);
if (prexor)
continue;
+ if (s.failed > 1)
+ continue;
if (!test_bit(R5_Insync, &dev->flags) ||
((i == sh->pd_idx || i == sh->qd_idx) &&
s.failed == 0))
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index ce48aa7..bde2fc0 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1754,7 +1754,7 @@
if (ret)
return ret;
-#if CONFIG_DEBUG_FS
+#ifdef CONFIG_DEBUG_FS
/* Pass to debugfs */
ab8500_debug_resources[0].start = ab8500->irq;
ab8500_debug_resources[0].end = ab8500->irq;
diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c
index b44f020..6bdb78c 100644
--- a/drivers/mfd/htc-i2cpld.c
+++ b/drivers/mfd/htc-i2cpld.c
@@ -404,7 +404,7 @@
}
i2c_set_clientdata(client, chip);
- snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
+ snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
chip->client = client;
/* Reset the chip */
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 33a9234..83dab2f 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -647,7 +647,7 @@
default:
omap->nports = OMAP3_HS_USB_PORTS;
dev_dbg(dev,
- "USB HOST Rev:0x%d not recognized, assuming %d ports\n",
+ "USB HOST Rev:0x%x not recognized, assuming %d ports\n",
omap->usbhs_rev, omap->nports);
break;
}
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 3bc969a..4d3ff37 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -724,24 +724,24 @@
* above.
*/
static struct twl4030_resconfig omap3_idle_rconfig[] = {
- TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0),
+ TWL_REMAP_SLEEP(RES_VAUX1, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VAUX2, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VAUX3, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VAUX4, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VMMC1, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VMMC2, TWL4030_RESCONFIG_UNDEF, 0, 0),
TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1),
TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0),
- TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0),
+ TWL_REMAP_SLEEP(RES_VSIM, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VDAC, TWL4030_RESCONFIG_UNDEF, 0, 0),
TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2),
TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2),
TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2),
TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2),
TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1),
TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1),
- TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0),
- TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0),
+ TWL_REMAP_SLEEP(RES_VUSB_1V5, TWL4030_RESCONFIG_UNDEF, 0, 0),
+ TWL_REMAP_SLEEP(RES_VUSB_1V8, TWL4030_RESCONFIG_UNDEF, 0, 0),
TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0),
/* Resource #20 USB charge pump skipped */
TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1),
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 324e1de..2da05c0 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -601,6 +601,7 @@
cl->timer_count = MEI_CONNECT_TIMEOUT;
list_add_tail(&cb->list, &dev->ctrl_rd_list.list);
} else {
+ cl->state = MEI_FILE_INITIALIZING;
list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
}
diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c
index 3095fc5..5ccc23b 100644
--- a/drivers/misc/mei/nfc.c
+++ b/drivers/misc/mei/nfc.c
@@ -342,9 +342,10 @@
ndev = (struct mei_nfc_dev *) cldev->priv_data;
dev = ndev->cl->dev;
+ err = -ENOMEM;
mei_buf = kzalloc(length + MEI_NFC_HEADER_SIZE, GFP_KERNEL);
if (!mei_buf)
- return -ENOMEM;
+ goto out;
hdr = (struct mei_nfc_hci_hdr *) mei_buf;
hdr->cmd = MEI_NFC_CMD_HCI_SEND;
@@ -354,12 +355,9 @@
hdr->data_size = length;
memcpy(mei_buf + MEI_NFC_HEADER_SIZE, buf, length);
-
err = __mei_cl_send(ndev->cl, mei_buf, length + MEI_NFC_HEADER_SIZE);
if (err < 0)
- return err;
-
- kfree(mei_buf);
+ goto out;
if (!wait_event_interruptible_timeout(ndev->send_wq,
ndev->recv_req_id == ndev->req_id, HZ)) {
@@ -368,7 +366,8 @@
} else {
ndev->req_id++;
}
-
+out:
+ kfree(mei_buf);
return err;
}
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f0ed92e..5967b38 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -931,7 +931,7 @@
u32 val;
val = readl(info->reg.gpmc_ecc_config);
- if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs)
+ if (((val >> ECC_CONFIG_CS_SHIFT) & CS_MASK) != info->gpmc_cs)
return -EINVAL;
/* read ecc result */
@@ -1794,9 +1794,12 @@
}
/* populate MTD interface based on ECC scheme */
- nand_chip->ecc.layout = &omap_oobinfo;
ecclayout = &omap_oobinfo;
switch (info->ecc_opt) {
+ case OMAP_ECC_HAM1_CODE_SW:
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ break;
+
case OMAP_ECC_HAM1_CODE_HW:
pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
nand_chip->ecc.mode = NAND_ECC_HW;
@@ -1848,7 +1851,7 @@
nand_chip->ecc.priv = nand_bch_init(mtd,
nand_chip->ecc.size,
nand_chip->ecc.bytes,
- &nand_chip->ecc.layout);
+ &ecclayout);
if (!nand_chip->ecc.priv) {
pr_err("nand: error: unable to use s/w BCH library\n");
err = -EINVAL;
@@ -1923,7 +1926,7 @@
nand_chip->ecc.priv = nand_bch_init(mtd,
nand_chip->ecc.size,
nand_chip->ecc.bytes,
- &nand_chip->ecc.layout);
+ &ecclayout);
if (!nand_chip->ecc.priv) {
pr_err("nand: error: unable to use s/w BCH library\n");
err = -EINVAL;
@@ -2012,6 +2015,9 @@
goto return_error;
}
+ if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW)
+ goto scan_tail;
+
/* all OOB bytes from oobfree->offset till end off OOB are free */
ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
/* check if NAND device's OOB is enough to store ECC signatures */
@@ -2021,7 +2027,9 @@
err = -EINVAL;
goto return_error;
}
+ nand_chip->ecc.layout = ecclayout;
+scan_tail:
/* second phase scan */
if (nand_scan_tail(mtd)) {
err = -ENXIO;
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 5dede6e..109cb44 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -280,7 +280,7 @@
priv->raminit_ctrlreg = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
- if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0)
+ if (!priv->raminit_ctrlreg || priv->instance < 0)
dev_info(&pdev->dev, "control memory is not used for raminit\n");
else
priv->raminit = c_can_hw_raminit_ti;
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index f425ec2..944aa5d 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -549,6 +549,13 @@
/* process state changes depending on the new state */
switch (new_state) {
+ case CAN_STATE_ERROR_WARNING:
+ netdev_dbg(dev, "Error Warning\n");
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (bec.txerr > bec.rxerr) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
+ break;
case CAN_STATE_ERROR_ACTIVE:
netdev_dbg(dev, "Error Active\n");
cf->can_id |= CAN_ERR_PROT;
@@ -852,6 +859,8 @@
if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE ||
priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
+ else
+ reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK;
/* save for later use */
priv->reg_ctrl_default = reg_ctrl;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index d169215..b27ac60 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -172,6 +172,35 @@
netdev_err(dev, "setting SJA1000 into normal mode failed!\n");
}
+/*
+ * initialize SJA1000 chip:
+ * - reset chip
+ * - set output mode
+ * - set baudrate
+ * - enable interrupts
+ * - start operating mode
+ */
+static void chipset_init(struct net_device *dev)
+{
+ struct sja1000_priv *priv = netdev_priv(dev);
+
+ /* set clock divider and output control register */
+ priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+
+ /* set acceptance filter (accept all) */
+ priv->write_reg(priv, SJA1000_ACCC0, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC1, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC2, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC3, 0x00);
+
+ priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
+
+ priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
+}
+
static void sja1000_start(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
@@ -180,6 +209,10 @@
if (priv->can.state != CAN_STATE_STOPPED)
set_reset_mode(dev);
+ /* Initialize chip if uninitialized at this stage */
+ if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+ chipset_init(dev);
+
/* Clear error counters and error code capture */
priv->write_reg(priv, SJA1000_TXERR, 0x0);
priv->write_reg(priv, SJA1000_RXERR, 0x0);
@@ -237,35 +270,6 @@
}
/*
- * initialize SJA1000 chip:
- * - reset chip
- * - set output mode
- * - set baudrate
- * - enable interrupts
- * - start operating mode
- */
-static void chipset_init(struct net_device *dev)
-{
- struct sja1000_priv *priv = netdev_priv(dev);
-
- /* set clock divider and output control register */
- priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
-
- /* set acceptance filter (accept all) */
- priv->write_reg(priv, SJA1000_ACCC0, 0x00);
- priv->write_reg(priv, SJA1000_ACCC1, 0x00);
- priv->write_reg(priv, SJA1000_ACCC2, 0x00);
- priv->write_reg(priv, SJA1000_ACCC3, 0x00);
-
- priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
- priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
- priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
- priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
-
- priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
-}
-
-/*
* transmit a CAN message
* message layout in the sk_buff should be like this:
* xx xx xx xx ff ll 00 11 22 33 44 55 66 77
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index e1a8f4e..e4222af 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -563,15 +563,21 @@
struct xgene_enet_desc_ring *ring;
ring = pdata->tx_ring;
- if (ring && ring->cp_ring && ring->cp_ring->cp_skb)
- devm_kfree(dev, ring->cp_ring->cp_skb);
- xgene_enet_free_desc_ring(ring);
+ if (ring) {
+ if (ring->cp_ring && ring->cp_ring->cp_skb)
+ devm_kfree(dev, ring->cp_ring->cp_skb);
+ xgene_enet_free_desc_ring(ring);
+ }
ring = pdata->rx_ring;
- if (ring && ring->buf_pool && ring->buf_pool->rx_skb)
- devm_kfree(dev, ring->buf_pool->rx_skb);
- xgene_enet_free_desc_ring(ring->buf_pool);
- xgene_enet_free_desc_ring(ring);
+ if (ring) {
+ if (ring->buf_pool) {
+ if (ring->buf_pool->rx_skb)
+ devm_kfree(dev, ring->buf_pool->rx_skb);
+ xgene_enet_free_desc_ring(ring->buf_pool);
+ }
+ xgene_enet_free_desc_ring(ring);
+ }
}
static struct xgene_enet_desc_ring *xgene_enet_create_desc_ring(
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 4e6c82e..4ccc806 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -483,11 +483,7 @@
#ifdef BNX2X_STOP_ON_ERROR
fp->tpa_queue_used |= (1 << queue);
-#ifdef _ASM_GENERIC_INT_L64_H
- DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
-#else
DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n",
-#endif
fp->tpa_queue_used);
#endif
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c13364b..900cab4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -10052,6 +10052,8 @@
}
#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
+#define BNX2X_PREV_UNDI_PROD_ADDR_H(f) (BAR_TSTRORM_INTMEM + \
+ 0x1848 + ((f) << 4))
#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
@@ -10059,8 +10061,6 @@
#define BCM_5710_UNDI_FW_MF_MAJOR (0x07)
#define BCM_5710_UNDI_FW_MF_MINOR (0x08)
#define BCM_5710_UNDI_FW_MF_VERS (0x05)
-#define BNX2X_PREV_UNDI_MF_PORT(p) (BAR_TSTRORM_INTMEM + 0x150c + ((p) << 4))
-#define BNX2X_PREV_UNDI_MF_FUNC(f) (BAR_TSTRORM_INTMEM + 0x184c + ((f) << 4))
static bool bnx2x_prev_is_after_undi(struct bnx2x *bp)
{
@@ -10079,72 +10079,25 @@
return false;
}
-static bool bnx2x_prev_unload_undi_fw_supports_mf(struct bnx2x *bp)
-{
- u8 major, minor, version;
- u32 fw;
-
- /* Must check that FW is loaded */
- if (!(REG_RD(bp, MISC_REG_RESET_REG_1) &
- MISC_REGISTERS_RESET_REG_1_RST_XSEM)) {
- BNX2X_DEV_INFO("XSEM is reset - UNDI MF FW is not loaded\n");
- return false;
- }
-
- /* Read Currently loaded FW version */
- fw = REG_RD(bp, XSEM_REG_PRAM);
- major = fw & 0xff;
- minor = (fw >> 0x8) & 0xff;
- version = (fw >> 0x10) & 0xff;
- BNX2X_DEV_INFO("Loaded FW: 0x%08x: Major 0x%02x Minor 0x%02x Version 0x%02x\n",
- fw, major, minor, version);
-
- if (major > BCM_5710_UNDI_FW_MF_MAJOR)
- return true;
-
- if ((major == BCM_5710_UNDI_FW_MF_MAJOR) &&
- (minor > BCM_5710_UNDI_FW_MF_MINOR))
- return true;
-
- if ((major == BCM_5710_UNDI_FW_MF_MAJOR) &&
- (minor == BCM_5710_UNDI_FW_MF_MINOR) &&
- (version >= BCM_5710_UNDI_FW_MF_VERS))
- return true;
-
- return false;
-}
-
-static void bnx2x_prev_unload_undi_mf(struct bnx2x *bp)
-{
- int i;
-
- /* Due to legacy (FW) code, the first function on each engine has a
- * different offset macro from the rest of the functions.
- * Setting this for all 8 functions is harmless regardless of whether
- * this is actually a multi-function device.
- */
- for (i = 0; i < 2; i++)
- REG_WR(bp, BNX2X_PREV_UNDI_MF_PORT(i), 1);
-
- for (i = 2; i < 8; i++)
- REG_WR(bp, BNX2X_PREV_UNDI_MF_FUNC(i - 2), 1);
-
- BNX2X_DEV_INFO("UNDI FW (MF) set to discard\n");
-}
-
-static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 port, u8 inc)
+static void bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 inc)
{
u16 rcq, bd;
- u32 tmp_reg = REG_RD(bp, BNX2X_PREV_UNDI_PROD_ADDR(port));
+ u32 addr, tmp_reg;
+ if (BP_FUNC(bp) < 2)
+ addr = BNX2X_PREV_UNDI_PROD_ADDR(BP_PORT(bp));
+ else
+ addr = BNX2X_PREV_UNDI_PROD_ADDR_H(BP_FUNC(bp) - 2);
+
+ tmp_reg = REG_RD(bp, addr);
rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
- REG_WR(bp, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
+ REG_WR(bp, addr, tmp_reg);
- BNX2X_DEV_INFO("UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n",
- port, bd, rcq);
+ BNX2X_DEV_INFO("UNDI producer [%d/%d][%08x] rings bd -> 0x%04x, rcq -> 0x%04x\n",
+ BP_PORT(bp), BP_FUNC(bp), addr, bd, rcq);
}
static int bnx2x_prev_mcp_done(struct bnx2x *bp)
@@ -10383,7 +10336,6 @@
/* Reset should be performed after BRB is emptied */
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
u32 timer_count = 1000;
- bool need_write = true;
/* Close the MAC Rx to prevent BRB from filling up */
bnx2x_prev_unload_close_mac(bp, &mac_vals);
@@ -10420,20 +10372,10 @@
else
timer_count--;
- /* New UNDI FW supports MF and contains better
- * cleaning methods - might be redundant but harmless.
- */
- if (bnx2x_prev_unload_undi_fw_supports_mf(bp)) {
- if (need_write) {
- bnx2x_prev_unload_undi_mf(bp);
- need_write = false;
- }
- } else if (prev_undi) {
- /* If UNDI resides in memory,
- * manually increment it
- */
- bnx2x_prev_unload_undi_inc(bp, BP_PORT(bp), 1);
- }
+ /* If UNDI resides in memory, manually increment it */
+ if (prev_undi)
+ bnx2x_prev_unload_undi_inc(bp, 1);
+
udelay(10);
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index d572821..c067b78 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -652,6 +652,7 @@
struct tid_info tids;
void **tid_release_head;
spinlock_t tid_release_lock;
+ struct workqueue_struct *workq;
struct work_struct tid_release_task;
struct work_struct db_full_task;
struct work_struct db_drop_task;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 1afee70..18fb9c6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -643,8 +643,6 @@
return ret;
}
-static struct workqueue_struct *workq;
-
/**
* link_start - enable a port
* @dev: the port to enable
@@ -3340,7 +3338,7 @@
adap->tid_release_head = (void **)((uintptr_t)p | chan);
if (!adap->tid_release_task_busy) {
adap->tid_release_task_busy = true;
- queue_work(workq, &adap->tid_release_task);
+ queue_work(adap->workq, &adap->tid_release_task);
}
spin_unlock_bh(&adap->tid_release_lock);
}
@@ -4140,7 +4138,7 @@
notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
t4_set_reg_field(adap, SGE_INT_ENABLE3,
DBFIFO_HP_INT | DBFIFO_LP_INT, 0);
- queue_work(workq, &adap->db_full_task);
+ queue_work(adap->workq, &adap->db_full_task);
}
}
@@ -4150,7 +4148,7 @@
disable_dbs(adap);
notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL);
}
- queue_work(workq, &adap->db_drop_task);
+ queue_work(adap->workq, &adap->db_drop_task);
}
static void uld_attach(struct adapter *adap, unsigned int uld)
@@ -6517,6 +6515,12 @@
goto out_disable_device;
}
+ adapter->workq = create_singlethread_workqueue("cxgb4");
+ if (!adapter->workq) {
+ err = -ENOMEM;
+ goto out_free_adapter;
+ }
+
/* PCI device has been enabled */
adapter->flags |= DEV_ENABLED;
@@ -6715,6 +6719,9 @@
out_unmap_bar0:
iounmap(adapter->regs);
out_free_adapter:
+ if (adapter->workq)
+ destroy_workqueue(adapter->workq);
+
kfree(adapter);
out_disable_device:
pci_disable_pcie_error_reporting(pdev);
@@ -6736,6 +6743,11 @@
if (adapter) {
int i;
+ /* Tear down per-adapter Work Queue first since it can contain
+ * references to our adapter data structure.
+ */
+ destroy_workqueue(adapter->workq);
+
if (is_offload(adapter))
detach_ulds(adapter);
@@ -6788,20 +6800,14 @@
{
int ret;
- workq = create_singlethread_workqueue("cxgb4");
- if (!workq)
- return -ENOMEM;
-
/* Debugfs support is optional, just warn if this fails */
cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
if (!cxgb4_debugfs_root)
pr_warn("could not create debugfs entry, continuing\n");
ret = pci_register_driver(&cxgb4_driver);
- if (ret < 0) {
+ if (ret < 0)
debugfs_remove(cxgb4_debugfs_root);
- destroy_workqueue(workq);
- }
register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
@@ -6813,8 +6819,6 @@
unregister_inet6addr_notifier(&cxgb4_inet6addr_notifier);
pci_unregister_driver(&cxgb4_driver);
debugfs_remove(cxgb4_debugfs_root); /* NULL ok */
- flush_workqueue(workq);
- destroy_workqueue(workq);
}
module_init(cxgb4_init_module);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index b0bba32..d22d728 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2303,7 +2303,8 @@
FW_EQ_ETH_CMD_PFN(adap->fn) | FW_EQ_ETH_CMD_VFN(0));
c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_ALLOC |
FW_EQ_ETH_CMD_EQSTART | FW_LEN16(c));
- c.viid_pkd = htonl(FW_EQ_ETH_CMD_VIID(pi->viid));
+ c.viid_pkd = htonl(FW_EQ_ETH_CMD_AUTOEQUEQE |
+ FW_EQ_ETH_CMD_VIID(pi->viid));
c.fetchszm_to_iqid = htonl(FW_EQ_ETH_CMD_HOSTFCMODE(2) |
FW_EQ_ETH_CMD_PCIECHN(pi->tx_chan) |
FW_EQ_ETH_CMD_FETCHRO(1) |
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 0549170..5f2729e 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -1227,6 +1227,7 @@
#define FW_EQ_ETH_CMD_CIDXFTHRESH(x) ((x) << 16)
#define FW_EQ_ETH_CMD_EQSIZE(x) ((x) << 0)
+#define FW_EQ_ETH_CMD_AUTOEQUEQE (1U << 30)
#define FW_EQ_ETH_CMD_VIID(x) ((x) << 16)
struct fw_eq_ctrl_cmd {
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
index bdfa80c..a5fb949 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
@@ -2250,7 +2250,8 @@
cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_ALLOC |
FW_EQ_ETH_CMD_EQSTART |
FW_LEN16(cmd));
- cmd.viid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_VIID(pi->viid));
+ cmd.viid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_AUTOEQUEQE |
+ FW_EQ_ETH_CMD_VIID(pi->viid));
cmd.fetchszm_to_iqid =
cpu_to_be32(FW_EQ_ETH_CMD_HOSTFCMODE(SGE_HOSTFCMODE_STPG) |
FW_EQ_ETH_CMD_PCIECHN(pi->port_id) |
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 9f7fa64..ee41d98 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -275,6 +275,9 @@
struct clk *clk_enet_out;
struct clk *clk_ptp;
+ bool ptp_clk_on;
+ struct mutex ptp_clk_mutex;
+
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff *tx_skbuff[TX_RING_SIZE];
@@ -335,7 +338,7 @@
u32 cycle_speed;
int hwts_rx_en;
int hwts_tx_en;
- struct timer_list time_keep;
+ struct delayed_work time_keep;
struct regulator *reg_phy;
};
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 4f87dff..89355a7 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1611,17 +1611,27 @@
goto failed_clk_enet_out;
}
if (fep->clk_ptp) {
+ mutex_lock(&fep->ptp_clk_mutex);
ret = clk_prepare_enable(fep->clk_ptp);
- if (ret)
+ if (ret) {
+ mutex_unlock(&fep->ptp_clk_mutex);
goto failed_clk_ptp;
+ } else {
+ fep->ptp_clk_on = true;
+ }
+ mutex_unlock(&fep->ptp_clk_mutex);
}
} else {
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
if (fep->clk_enet_out)
clk_disable_unprepare(fep->clk_enet_out);
- if (fep->clk_ptp)
+ if (fep->clk_ptp) {
+ mutex_lock(&fep->ptp_clk_mutex);
clk_disable_unprepare(fep->clk_ptp);
+ fep->ptp_clk_on = false;
+ mutex_unlock(&fep->ptp_clk_mutex);
+ }
}
return 0;
@@ -2625,6 +2635,8 @@
if (IS_ERR(fep->clk_enet_out))
fep->clk_enet_out = NULL;
+ fep->ptp_clk_on = false;
+ mutex_init(&fep->ptp_clk_mutex);
fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
fep->bufdesc_ex =
pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
@@ -2715,10 +2727,10 @@
struct net_device *ndev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(ndev);
+ cancel_delayed_work_sync(&fep->time_keep);
cancel_work_sync(&fep->tx_timeout_work);
unregister_netdev(ndev);
fec_enet_mii_remove(fep);
- del_timer_sync(&fep->time_keep);
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
if (fep->ptp_clock)
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index 82386b2..cca3617 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -245,12 +245,20 @@
u64 ns;
unsigned long flags;
+ mutex_lock(&fep->ptp_clk_mutex);
+ /* Check the ptp clock */
+ if (!fep->ptp_clk_on) {
+ mutex_unlock(&fep->ptp_clk_mutex);
+ return -EINVAL;
+ }
+
ns = ts->tv_sec * 1000000000ULL;
ns += ts->tv_nsec;
spin_lock_irqsave(&fep->tmreg_lock, flags);
timecounter_init(&fep->tc, &fep->cc, ns);
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
+ mutex_unlock(&fep->ptp_clk_mutex);
return 0;
}
@@ -338,17 +346,22 @@
* fec_time_keep - call timecounter_read every second to avoid timer overrun
* because ENET just support 32bit counter, will timeout in 4s
*/
-static void fec_time_keep(unsigned long _data)
+static void fec_time_keep(struct work_struct *work)
{
- struct fec_enet_private *fep = (struct fec_enet_private *)_data;
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct fec_enet_private *fep = container_of(dwork, struct fec_enet_private, time_keep);
u64 ns;
unsigned long flags;
- spin_lock_irqsave(&fep->tmreg_lock, flags);
- ns = timecounter_read(&fep->tc);
- spin_unlock_irqrestore(&fep->tmreg_lock, flags);
+ mutex_lock(&fep->ptp_clk_mutex);
+ if (fep->ptp_clk_on) {
+ spin_lock_irqsave(&fep->tmreg_lock, flags);
+ ns = timecounter_read(&fep->tc);
+ spin_unlock_irqrestore(&fep->tmreg_lock, flags);
+ }
+ mutex_unlock(&fep->ptp_clk_mutex);
- mod_timer(&fep->time_keep, jiffies + HZ);
+ schedule_delayed_work(&fep->time_keep, HZ);
}
/**
@@ -386,15 +399,13 @@
fec_ptp_start_cyclecounter(ndev);
- init_timer(&fep->time_keep);
- fep->time_keep.data = (unsigned long)fep;
- fep->time_keep.function = fec_time_keep;
- fep->time_keep.expires = jiffies + HZ;
- add_timer(&fep->time_keep);
+ INIT_DELAYED_WORK(&fep->time_keep, fec_time_keep);
fep->ptp_clock = ptp_clock_register(&fep->ptp_caps, &pdev->dev);
if (IS_ERR(fep->ptp_clock)) {
fep->ptp_clock = NULL;
pr_err("ptp_clock_register failed\n");
}
+
+ schedule_delayed_work(&fep->time_keep, HZ);
}
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index c912756..21978cc 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -292,6 +292,18 @@
atomic_add(buffers_added, &(pool->available));
}
+/*
+ * The final 8 bytes of the buffer list is a counter of frames dropped
+ * because there was not a buffer in the buffer list capable of holding
+ * the frame.
+ */
+static void ibmveth_update_rx_no_buffer(struct ibmveth_adapter *adapter)
+{
+ __be64 *p = adapter->buffer_list_addr + 4096 - 8;
+
+ adapter->rx_no_buffer = be64_to_cpup(p);
+}
+
/* replenish routine */
static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
{
@@ -307,8 +319,7 @@
ibmveth_replenish_buffer_pool(adapter, pool);
}
- adapter->rx_no_buffer = *(u64 *)(((char*)adapter->buffer_list_addr) +
- 4096 - 8);
+ ibmveth_update_rx_no_buffer(adapter);
}
/* empty and free ana buffer pool - also used to do cleanup in error paths */
@@ -698,8 +709,7 @@
free_irq(netdev->irq, netdev);
- adapter->rx_no_buffer = *(u64 *)(((char *)adapter->buffer_list_addr) +
- 4096 - 8);
+ ibmveth_update_rx_no_buffer(adapter);
ibmveth_cleanup(adapter);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index bb7fe98b..537b621 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -247,7 +247,7 @@
u32 prttsyn_stat;
int n;
- if (pf->flags & I40E_FLAG_PTP)
+ if (!(pf->flags & I40E_FLAG_PTP))
return;
prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 8967255..3ac6a0d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1003,11 +1003,19 @@
static int i40e_vc_send_msg_to_vf(struct i40e_vf *vf, u32 v_opcode,
u32 v_retval, u8 *msg, u16 msglen)
{
- struct i40e_pf *pf = vf->pf;
- struct i40e_hw *hw = &pf->hw;
- int abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
+ struct i40e_pf *pf;
+ struct i40e_hw *hw;
+ int abs_vf_id;
i40e_status aq_ret;
+ /* validate the request */
+ if (!vf || vf->vf_id >= vf->pf->num_alloc_vfs)
+ return -EINVAL;
+
+ pf = vf->pf;
+ hw = &pf->hw;
+ abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
+
/* single place to detect unsuccessful return values */
if (v_retval) {
vf->num_invalid_msgs++;
@@ -1928,17 +1936,20 @@
{
struct i40e_hw *hw = &pf->hw;
struct i40e_vf *vf = pf->vf;
- int abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
int i;
- for (i = 0; i < pf->num_alloc_vfs; i++) {
+ for (i = 0; i < pf->num_alloc_vfs; i++, vf++) {
+ int abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
+ /* Not all vfs are enabled so skip the ones that are not */
+ if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states) &&
+ !test_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states))
+ continue;
+
/* Ignore return value on purpose - a given VF may fail, but
* we need to keep going and send to all of them
*/
i40e_aq_send_msg_to_vf(hw, abs_vf_id, v_opcode, v_retval,
msg, msglen, NULL);
- vf++;
- abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
}
}
@@ -1954,12 +1965,12 @@
struct i40e_hw *hw = &pf->hw;
struct i40e_vf *vf = pf->vf;
struct i40e_link_status *ls = &pf->hw.phy.link_info;
- int abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
int i;
pfe.event = I40E_VIRTCHNL_EVENT_LINK_CHANGE;
pfe.severity = I40E_PF_EVENT_SEVERITY_INFO;
- for (i = 0; i < pf->num_alloc_vfs; i++) {
+ for (i = 0; i < pf->num_alloc_vfs; i++, vf++) {
+ int abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
if (vf->link_forced) {
pfe.event_data.link_event.link_status = vf->link_up;
pfe.event_data.link_event.link_speed =
@@ -1972,8 +1983,6 @@
i40e_aq_send_msg_to_vf(hw, abs_vf_id, I40E_VIRTCHNL_OP_EVENT,
0, (u8 *)&pfe, sizeof(pfe),
NULL);
- vf++;
- abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
}
}
@@ -2002,7 +2011,18 @@
void i40e_vc_notify_vf_reset(struct i40e_vf *vf)
{
struct i40e_virtchnl_pf_event pfe;
- int abs_vf_id = vf->vf_id + vf->pf->hw.func_caps.vf_base_id;
+ int abs_vf_id;
+
+ /* validate the request */
+ if (!vf || vf->vf_id >= vf->pf->num_alloc_vfs)
+ return;
+
+ /* verify if the VF is in either init or active before proceeding */
+ if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states) &&
+ !test_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states))
+ return;
+
+ abs_vf_id = vf->vf_id + vf->pf->hw.func_caps.vf_base_id;
pfe.event = I40E_VIRTCHNL_EVENT_RESET_IMPENDING;
pfe.severity = I40E_PF_EVENT_SEVERITY_CERTAIN_DOOM;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 16039d1..b84f5ea 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -268,7 +268,7 @@
u16 cksum;
u16 unused;
u8 model[16];
- u16 mfg_id;
+ u8 mfg_id;
u16 id;
u8 flag;
u8 erase_cmd;
@@ -2362,6 +2362,19 @@
return QLC_DEFAULT_VNIC_COUNT;
}
+static inline void qlcnic_swap32_buffer(u32 *buffer, int count)
+{
+#if defined(__BIG_ENDIAN)
+ u32 *tmp = buffer;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ *tmp = swab32(*tmp);
+ tmp++;
+ }
+#endif
+}
+
#ifdef CONFIG_QLCNIC_HWMON
void qlcnic_register_hwmon_dev(struct qlcnic_adapter *);
void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index a4a4ec0..476e499 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2603,7 +2603,7 @@
}
qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_DIRECT_WINDOW,
- (addr));
+ (addr & 0xFFFF0000));
range = flash_offset + (count * sizeof(u32));
/* Check if data is spread across multiple sectors */
@@ -2753,7 +2753,7 @@
ret = qlcnic_83xx_lockless_flash_read32(adapter, QLCNIC_FDT_LOCATION,
(u8 *)&adapter->ahw->fdt,
count);
-
+ qlcnic_swap32_buffer((u32 *)&adapter->ahw->fdt, count);
qlcnic_83xx_unlock_flash(adapter);
return ret;
}
@@ -2788,7 +2788,7 @@
addr1 = (sector_start_addr & 0xFF) << 16;
addr2 = (sector_start_addr & 0xFF0000) >> 16;
- reversed_addr = addr1 | addr2;
+ reversed_addr = addr1 | addr2 | (sector_start_addr & 0xFF00);
qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA,
reversed_addr);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index f33559b..86783e1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1378,31 +1378,45 @@
{
struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
const struct firmware *fw = fw_info->fw;
- u32 dest, *p_cache;
+ u32 dest, *p_cache, *temp;
int i, ret = -EIO;
+ __le32 *temp_le;
u8 data[16];
size_t size;
u64 addr;
+ temp = kzalloc(fw->size, GFP_KERNEL);
+ if (!temp) {
+ release_firmware(fw);
+ fw_info->fw = NULL;
+ return -ENOMEM;
+ }
+
+ temp_le = (__le32 *)fw->data;
+
+ /* FW image in file is in little endian, swap the data to nullify
+ * the effect of writel() operation on big endian platform.
+ */
+ for (i = 0; i < fw->size / sizeof(u32); i++)
+ temp[i] = __le32_to_cpu(temp_le[i]);
+
dest = QLCRDX(adapter->ahw, QLCNIC_FW_IMAGE_ADDR);
size = (fw->size & ~0xF);
- p_cache = (u32 *)fw->data;
+ p_cache = temp;
addr = (u64)dest;
ret = qlcnic_ms_mem_write128(adapter, addr,
p_cache, size / 16);
if (ret) {
dev_err(&adapter->pdev->dev, "MS memory write failed\n");
- release_firmware(fw);
- fw_info->fw = NULL;
- return -EIO;
+ goto exit;
}
/* alignment check */
if (fw->size & 0xF) {
addr = dest + size;
for (i = 0; i < (fw->size & 0xF); i++)
- data[i] = fw->data[size + i];
+ data[i] = temp[size + i];
for (; i < 16; i++)
data[i] = 0;
ret = qlcnic_ms_mem_write128(adapter, addr,
@@ -1410,15 +1424,16 @@
if (ret) {
dev_err(&adapter->pdev->dev,
"MS memory write failed\n");
- release_firmware(fw);
- fw_info->fw = NULL;
- return -EIO;
+ goto exit;
}
}
+
+exit:
release_firmware(fw);
fw_info->fw = NULL;
+ kfree(temp);
- return 0;
+ return ret;
}
static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
index e46fc39..c9f57fb 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
@@ -47,15 +47,26 @@
u32 type;
u32 offset;
u32 cap_size;
+#if defined(__LITTLE_ENDIAN)
u8 mask;
u8 rsvd[2];
u8 flags;
+#else
+ u8 flags;
+ u8 rsvd[2];
+ u8 mask;
+#endif
} __packed;
struct __crb {
u32 addr;
+#if defined(__LITTLE_ENDIAN)
u8 stride;
u8 rsvd1[3];
+#else
+ u8 rsvd1[3];
+ u8 stride;
+#endif
u32 data_size;
u32 no_ops;
u32 rsvd2[4];
@@ -63,15 +74,28 @@
struct __ctrl {
u32 addr;
+#if defined(__LITTLE_ENDIAN)
u8 stride;
u8 index_a;
u16 timeout;
+#else
+ u16 timeout;
+ u8 index_a;
+ u8 stride;
+#endif
u32 data_size;
u32 no_ops;
+#if defined(__LITTLE_ENDIAN)
u8 opcode;
u8 index_v;
u8 shl_val;
u8 shr_val;
+#else
+ u8 shr_val;
+ u8 shl_val;
+ u8 index_v;
+ u8 opcode;
+#endif
u32 val1;
u32 val2;
u32 val3;
@@ -79,16 +103,27 @@
struct __cache {
u32 addr;
+#if defined(__LITTLE_ENDIAN)
u16 stride;
u16 init_tag_val;
+#else
+ u16 init_tag_val;
+ u16 stride;
+#endif
u32 size;
u32 no_ops;
u32 ctrl_addr;
u32 ctrl_val;
u32 read_addr;
+#if defined(__LITTLE_ENDIAN)
u8 read_addr_stride;
u8 read_addr_num;
u8 rsvd1[2];
+#else
+ u8 rsvd1[2];
+ u8 read_addr_num;
+ u8 read_addr_stride;
+#endif
} __packed;
struct __ocm {
@@ -122,23 +157,39 @@
struct __queue {
u32 sel_addr;
+#if defined(__LITTLE_ENDIAN)
u16 stride;
u8 rsvd[2];
+#else
+ u8 rsvd[2];
+ u16 stride;
+#endif
u32 size;
u32 no_ops;
u8 rsvd2[8];
u32 read_addr;
+#if defined(__LITTLE_ENDIAN)
u8 read_addr_stride;
u8 read_addr_cnt;
u8 rsvd3[2];
+#else
+ u8 rsvd3[2];
+ u8 read_addr_cnt;
+ u8 read_addr_stride;
+#endif
} __packed;
struct __pollrd {
u32 sel_addr;
u32 read_addr;
u32 sel_val;
+#if defined(__LITTLE_ENDIAN)
u16 sel_val_stride;
u16 no_ops;
+#else
+ u16 no_ops;
+ u16 sel_val_stride;
+#endif
u32 poll_wait;
u32 poll_mask;
u32 data_size;
@@ -153,9 +204,15 @@
u32 no_ops;
u32 sel_val_mask;
u32 read_addr;
+#if defined(__LITTLE_ENDIAN)
u8 sel_val_stride;
u8 data_size;
u8 rsvd[2];
+#else
+ u8 rsvd[2];
+ u8 data_size;
+ u8 sel_val_stride;
+#endif
} __packed;
struct __pollrdmwr {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index f5786d5..59a721f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -280,6 +280,7 @@
if (ret != 0)
return ret;
qlcnic_read_crb(adapter, buf, offset, size);
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
return size;
}
@@ -296,6 +297,7 @@
if (ret != 0)
return ret;
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
qlcnic_write_crb(adapter, buf, offset, size);
return size;
}
@@ -329,6 +331,7 @@
return -EIO;
memcpy(buf, &data, size);
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
return size;
}
@@ -346,6 +349,7 @@
if (ret != 0)
return ret;
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
memcpy(&data, buf, size);
if (qlcnic_pci_mem_write_2M(adapter, offset, data))
@@ -412,6 +416,7 @@
if (rem)
return QL_STATUS_INVALID_PARAM;
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
pm_cfg = (struct qlcnic_pm_func_cfg *)buf;
ret = validate_pm_config(adapter, pm_cfg, count);
@@ -474,6 +479,7 @@
pm_cfg[pci_func].dest_npar = 0;
pm_cfg[pci_func].pci_func = i;
}
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
return size;
}
@@ -555,6 +561,7 @@
if (rem)
return QL_STATUS_INVALID_PARAM;
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
esw_cfg = (struct qlcnic_esw_func_cfg *)buf;
ret = validate_esw_config(adapter, esw_cfg, count);
if (ret)
@@ -649,6 +656,7 @@
if (qlcnic_get_eswitch_port_config(adapter, &esw_cfg[pci_func]))
return QL_STATUS_INVALID_PARAM;
}
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
return size;
}
@@ -688,6 +696,7 @@
if (rem)
return QL_STATUS_INVALID_PARAM;
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
np_cfg = (struct qlcnic_npar_func_cfg *)buf;
ret = validate_npar_config(adapter, np_cfg, count);
if (ret)
@@ -759,6 +768,7 @@
np_cfg[pci_func].max_tx_queues = nic_info.max_tx_ques;
np_cfg[pci_func].max_rx_queues = nic_info.max_rx_ques;
}
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
return size;
}
@@ -916,6 +926,7 @@
pci_cfg = (struct qlcnic_pci_func_cfg *)buf;
count = size / sizeof(struct qlcnic_pci_func_cfg);
+ qlcnic_swap32_buffer((u32 *)pci_info, size / sizeof(u32));
for (i = 0; i < count; i++) {
pci_cfg[i].pci_func = pci_info[i].id;
pci_cfg[i].func_type = pci_info[i].type;
@@ -969,6 +980,7 @@
}
qlcnic_83xx_unlock_flash(adapter);
+ qlcnic_swap32_buffer((u32 *)p_read_buf, count);
memcpy(buf, p_read_buf, size);
kfree(p_read_buf);
@@ -986,9 +998,10 @@
if (!p_cache)
return -ENOMEM;
+ count = size / sizeof(u32);
+ qlcnic_swap32_buffer((u32 *)buf, count);
memcpy(p_cache, buf, size);
p_src = p_cache;
- count = size / sizeof(u32);
if (qlcnic_83xx_lock_flash(adapter) != 0) {
kfree(p_cache);
@@ -1053,6 +1066,7 @@
if (!p_cache)
return -ENOMEM;
+ qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
memcpy(p_cache, buf, size);
p_src = p_cache;
count = size / sizeof(u32);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 60e4ca0..a969555 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -739,7 +739,10 @@
struct macvlan_dev *vlan = netdev_priv(dev);
int err = -EINVAL;
- if (!vlan->port->passthru)
+ /* Support unicast filter only on passthru devices.
+ * Multicast filter should be allowed on all devices.
+ */
+ if (!vlan->port->passthru && is_unicast_ether_addr(addr))
return -EOPNOTSUPP;
if (flags & NLM_F_REPLACE)
@@ -760,7 +763,10 @@
struct macvlan_dev *vlan = netdev_priv(dev);
int err = -EINVAL;
- if (!vlan->port->passthru)
+ /* Support unicast filter only on passthru devices.
+ * Multicast filter should be allowed on all devices.
+ */
+ if (!vlan->port->passthru && is_unicast_ether_addr(addr))
return -EOPNOTSUPP;
if (is_unicast_ether_addr(addr))
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 526b94c..fdce1ea 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -157,6 +157,23 @@
return bcm7xxx_28nm_afe_config_init(phydev);
}
+static int bcm7xxx_28nm_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Re-apply workarounds coming out suspend/resume */
+ ret = bcm7xxx_28nm_config_init(phydev);
+ if (ret)
+ return ret;
+
+ /* 28nm Gigabit PHYs come out of reset without any half-duplex
+ * or "hub" compliant advertised mode, fix that. This does not
+ * cause any problems with the PHY library since genphy_config_aneg()
+ * gracefully handles auto-negotiated and forced modes.
+ */
+ return genphy_config_aneg(phydev);
+}
+
static int phy_set_clr_bits(struct phy_device *dev, int location,
int set_mask, int clr_mask)
{
@@ -212,7 +229,7 @@
}
/* Workaround for putting the PHY in IDDQ mode, required
- * for all BCM7XXX PHYs
+ * for all BCM7XXX 40nm and 65nm PHYs
*/
static int bcm7xxx_suspend(struct phy_device *phydev)
{
@@ -257,8 +274,7 @@
.config_init = bcm7xxx_28nm_afe_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_afe_config_init,
+ .resume = bcm7xxx_28nm_resume,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM7439,
@@ -270,8 +286,7 @@
.config_init = bcm7xxx_28nm_afe_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_afe_config_init,
+ .resume = bcm7xxx_28nm_resume,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM7445,
@@ -283,21 +298,7 @@
.config_init = bcm7xxx_28nm_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_config_init,
- .driver = { .owner = THIS_MODULE },
-}, {
- .name = "Broadcom BCM7XXX 28nm",
- .phy_id = PHY_ID_BCM7XXX_28,
- .phy_id_mask = PHY_BCM_OUI_MASK,
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_28nm_config_init,
+ .resume = bcm7xxx_28nm_afe_config_init,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_BCM_OUI_4,
@@ -331,7 +332,6 @@
{ PHY_ID_BCM7366, 0xfffffff0, },
{ PHY_ID_BCM7439, 0xfffffff0, },
{ PHY_ID_BCM7445, 0xfffffff0, },
- { PHY_ID_BCM7XXX_28, 0xfffffc00 },
{ PHY_BCM_OUI_4, 0xffff0000 },
{ PHY_BCM_OUI_5, 0xffffff00 },
{ }
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 180c494..a4b0819 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -43,6 +43,22 @@
static int smsc_phy_config_init(struct phy_device *phydev)
{
+ int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+
+ if (rc < 0)
+ return rc;
+
+ /* Enable energy detect mode for this SMSC Transceivers */
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc | MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+
+ return smsc_phy_ack_interrupt(phydev);
+}
+
+static int smsc_phy_reset(struct phy_device *phydev)
+{
int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
if (rc < 0)
return rc;
@@ -66,18 +82,7 @@
rc = phy_read(phydev, MII_BMCR);
} while (rc & BMCR_RESET);
}
-
- rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
- if (rc < 0)
- return rc;
-
- /* Enable energy detect mode for this SMSC Transceivers */
- rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
- rc | MII_LAN83C185_EDPWRDOWN);
- if (rc < 0)
- return rc;
-
- return smsc_phy_ack_interrupt (phydev);
+ return 0;
}
static int lan911x_config_init(struct phy_device *phydev)
@@ -142,6 +147,7 @@
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
@@ -164,6 +170,7 @@
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
@@ -186,6 +193,7 @@
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
@@ -230,6 +238,7 @@
.config_aneg = genphy_config_aneg,
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index f46a24f..79cb831 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -453,7 +453,7 @@
base = dt_mem_next_cell(dt_root_addr_cells, &prop);
size = dt_mem_next_cell(dt_root_size_cells, &prop);
- if (base && size &&
+ if (size &&
early_init_dt_reserve_memory_arch(base, size, nomap) == 0)
pr_debug("Reserved memory: reserved region for node '%s': base %pa, size %ld MiB\n",
uname, &base, (unsigned long)size / SZ_1M);
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 3e06a69..1471e0a 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -301,16 +301,17 @@
/* Get the reg property (if any) */
addr = of_get_property(device, "reg", NULL);
+ /* Try the new-style interrupts-extended first */
+ res = of_parse_phandle_with_args(device, "interrupts-extended",
+ "#interrupt-cells", index, out_irq);
+ if (!res)
+ return of_irq_parse_raw(addr, out_irq);
+
/* Get the interrupts property */
intspec = of_get_property(device, "interrupts", &intlen);
- if (intspec == NULL) {
- /* Try the new-style interrupts-extended */
- res = of_parse_phandle_with_args(device, "interrupts-extended",
- "#interrupt-cells", index, out_irq);
- if (res)
- return -EINVAL;
- return of_irq_parse_raw(addr, out_irq);
- }
+ if (intspec == NULL)
+ return -EINVAL;
+
intlen /= sizeof(*intspec);
pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c
index d410026..a737cb5 100644
--- a/drivers/of/selftest.c
+++ b/drivers/of/selftest.c
@@ -27,6 +27,7 @@
#define NO_OF_NODES 2
static struct device_node *nodes[NO_OF_NODES];
static int last_node_index;
+static bool selftest_live_tree;
#define selftest(result, fmt, ...) { \
if (!(result)) { \
@@ -630,13 +631,6 @@
{
struct device_node *next, *root = np, *dup;
- if (!np) {
- pr_warn("%s: No tree to attach; not running tests\n",
- __func__);
- return -ENODATA;
- }
-
-
/* skip root node */
np = np->child;
/* storing a copy in temporary node */
@@ -672,12 +666,12 @@
static int __init selftest_data_add(void)
{
void *selftest_data;
- struct device_node *selftest_data_node;
+ struct device_node *selftest_data_node, *np;
extern uint8_t __dtb_testcases_begin[];
extern uint8_t __dtb_testcases_end[];
const int size = __dtb_testcases_end - __dtb_testcases_begin;
- if (!size || !of_allnodes) {
+ if (!size) {
pr_warn("%s: No testcase data to attach; not running tests\n",
__func__);
return -ENODATA;
@@ -692,6 +686,22 @@
return -ENOMEM;
}
of_fdt_unflatten_tree(selftest_data, &selftest_data_node);
+ if (!selftest_data_node) {
+ pr_warn("%s: No tree to attach; not running tests\n", __func__);
+ return -ENODATA;
+ }
+
+ if (!of_allnodes) {
+ /* enabling flag for removing nodes */
+ selftest_live_tree = true;
+ of_allnodes = selftest_data_node;
+
+ for_each_of_allnodes(np)
+ __of_attach_node_sysfs(np);
+ of_aliases = of_find_node_by_path("/aliases");
+ of_chosen = of_find_node_by_path("/chosen");
+ return 0;
+ }
/* attach the sub-tree to live tree */
return attach_node_and_children(selftest_data_node);
@@ -723,6 +733,18 @@
struct device_node *np;
struct property *prop;
+ if (selftest_live_tree) {
+ of_node_put(of_aliases);
+ of_node_put(of_chosen);
+ of_aliases = NULL;
+ of_chosen = NULL;
+ for_each_child_of_node(of_allnodes, np)
+ detach_node_and_children(np);
+ __of_detach_node_sysfs(of_allnodes);
+ of_allnodes = NULL;
+ return;
+ }
+
while (last_node_index >= 0) {
if (nodes[last_node_index]) {
np = of_find_node_by_path(nodes[last_node_index]->full_name);
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 2d8a4d0..8922c37 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -1,9 +1,18 @@
menu "PCI host controller drivers"
depends on PCI
+config PCI_DRA7XX
+ bool "TI DRA7xx PCIe controller"
+ select PCIE_DW
+ depends on OF && HAS_IOMEM && TI_PIPE3
+ help
+ Enables support for the PCIe controller in the DRA7xx SoC. There
+ are two instances of PCIe controller in DRA7xx. This controller can
+ act both as EP and RC. This reuses the Designware core.
+
config PCI_MVEBU
bool "Marvell EBU PCIe controller"
- depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
+ depends on ARCH_MVEBU || ARCH_DOVE
depends on OF
config PCIE_DW
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 0daec79..d0e88f1 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
new file mode 100644
index 0000000..52b34fe
--- /dev/null
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -0,0 +1,458 @@
+/*
+ * pcie-dra7xx - PCIe controller driver for TI DRA7xx SoCs
+ *
+ * Copyright (C) 2013-2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/resource.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+/* PCIe controller wrapper DRA7XX configuration registers */
+
+#define PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN 0x0024
+#define PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN 0x0028
+#define ERR_SYS BIT(0)
+#define ERR_FATAL BIT(1)
+#define ERR_NONFATAL BIT(2)
+#define ERR_COR BIT(3)
+#define ERR_AXI BIT(4)
+#define ERR_ECRC BIT(5)
+#define PME_TURN_OFF BIT(8)
+#define PME_TO_ACK BIT(9)
+#define PM_PME BIT(10)
+#define LINK_REQ_RST BIT(11)
+#define LINK_UP_EVT BIT(12)
+#define CFG_BME_EVT BIT(13)
+#define CFG_MSE_EVT BIT(14)
+#define INTERRUPTS (ERR_SYS | ERR_FATAL | ERR_NONFATAL | ERR_COR | ERR_AXI | \
+ ERR_ECRC | PME_TURN_OFF | PME_TO_ACK | PM_PME | \
+ LINK_REQ_RST | LINK_UP_EVT | CFG_BME_EVT | CFG_MSE_EVT)
+
+#define PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI 0x0034
+#define PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI 0x0038
+#define INTA BIT(0)
+#define INTB BIT(1)
+#define INTC BIT(2)
+#define INTD BIT(3)
+#define MSI BIT(4)
+#define LEG_EP_INTERRUPTS (INTA | INTB | INTC | INTD)
+
+#define PCIECTRL_DRA7XX_CONF_DEVICE_CMD 0x0104
+#define LTSSM_EN 0x1
+
+#define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C
+#define LINK_UP BIT(16)
+
+struct dra7xx_pcie {
+ void __iomem *base;
+ struct phy **phy;
+ int phy_count;
+ struct device *dev;
+ struct pcie_port pp;
+};
+
+#define to_dra7xx_pcie(x) container_of((x), struct dra7xx_pcie, pp)
+
+static inline u32 dra7xx_pcie_readl(struct dra7xx_pcie *pcie, u32 offset)
+{
+ return readl(pcie->base + offset);
+}
+
+static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
+ u32 value)
+{
+ writel(value, pcie->base + offset);
+}
+
+static int dra7xx_pcie_link_up(struct pcie_port *pp)
+{
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+ u32 reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS);
+
+ return !!(reg & LINK_UP);
+}
+
+static int dra7xx_pcie_establish_link(struct pcie_port *pp)
+{
+ u32 reg;
+ unsigned int retries = 1000;
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+
+ if (dw_pcie_link_up(pp)) {
+ dev_err(pp->dev, "link is already up\n");
+ return 0;
+ }
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+ reg |= LTSSM_EN;
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+
+ while (retries--) {
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_PHY_CS);
+ if (reg & LINK_UP)
+ break;
+ usleep_range(10, 20);
+ }
+
+ if (retries == 0) {
+ dev_err(pp->dev, "link is not up\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
+{
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
+ ~INTERRUPTS);
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN, INTERRUPTS);
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
+ ~LEG_EP_INTERRUPTS & ~MSI);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI, MSI);
+ else
+ dra7xx_pcie_writel(dra7xx,
+ PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
+ LEG_EP_INTERRUPTS);
+}
+
+static void dra7xx_pcie_host_init(struct pcie_port *pp)
+{
+ dw_pcie_setup_rc(pp);
+ dra7xx_pcie_establish_link(pp);
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+ dra7xx_pcie_enable_interrupts(pp);
+}
+
+static struct pcie_host_ops dra7xx_pcie_host_ops = {
+ .link_up = dra7xx_pcie_link_up,
+ .host_init = dra7xx_pcie_host_init,
+};
+
+static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+ irq_set_chip_data(irq, domain->host_data);
+ set_irq_flags(irq, IRQF_VALID);
+
+ return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+ .map = dra7xx_pcie_intx_map,
+};
+
+static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
+{
+ struct device *dev = pp->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *pcie_intc_node = of_get_next_child(node, NULL);
+
+ if (!pcie_intc_node) {
+ dev_err(dev, "No PCIe Intc node found\n");
+ return PTR_ERR(pcie_intc_node);
+ }
+
+ pp->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
+ &intx_domain_ops, pp);
+ if (!pp->irq_domain) {
+ dev_err(dev, "Failed to get a INTx IRQ domain\n");
+ return PTR_ERR(pp->irq_domain);
+ }
+
+ return 0;
+}
+
+static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
+{
+ struct pcie_port *pp = arg;
+ struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+ u32 reg;
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
+
+ switch (reg) {
+ case MSI:
+ dw_handle_msi_irq(pp);
+ break;
+ case INTA:
+ case INTB:
+ case INTC:
+ case INTD:
+ generic_handle_irq(irq_find_mapping(pp->irq_domain, ffs(reg)));
+ break;
+ }
+
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
+{
+ struct dra7xx_pcie *dra7xx = arg;
+ u32 reg;
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN);
+
+ if (reg & ERR_SYS)
+ dev_dbg(dra7xx->dev, "System Error\n");
+
+ if (reg & ERR_FATAL)
+ dev_dbg(dra7xx->dev, "Fatal Error\n");
+
+ if (reg & ERR_NONFATAL)
+ dev_dbg(dra7xx->dev, "Non Fatal Error\n");
+
+ if (reg & ERR_COR)
+ dev_dbg(dra7xx->dev, "Correctable Error\n");
+
+ if (reg & ERR_AXI)
+ dev_dbg(dra7xx->dev, "AXI tag lookup fatal Error\n");
+
+ if (reg & ERR_ECRC)
+ dev_dbg(dra7xx->dev, "ECRC Error\n");
+
+ if (reg & PME_TURN_OFF)
+ dev_dbg(dra7xx->dev,
+ "Power Management Event Turn-Off message received\n");
+
+ if (reg & PME_TO_ACK)
+ dev_dbg(dra7xx->dev,
+ "Power Management Turn-Off Ack message received\n");
+
+ if (reg & PM_PME)
+ dev_dbg(dra7xx->dev,
+ "PM Power Management Event message received\n");
+
+ if (reg & LINK_REQ_RST)
+ dev_dbg(dra7xx->dev, "Link Request Reset\n");
+
+ if (reg & LINK_UP_EVT)
+ dev_dbg(dra7xx->dev, "Link-up state change\n");
+
+ if (reg & CFG_BME_EVT)
+ dev_dbg(dra7xx->dev, "CFG 'Bus Master Enable' change\n");
+
+ if (reg & CFG_MSE_EVT)
+ dev_dbg(dra7xx->dev, "CFG 'Memory Space Enable' change\n");
+
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN, reg);
+
+ return IRQ_HANDLED;
+}
+
+static int add_pcie_port(struct dra7xx_pcie *dra7xx,
+ struct platform_device *pdev)
+{
+ int ret;
+ struct pcie_port *pp;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+
+ pp = &dra7xx->pp;
+ pp->dev = dev;
+ pp->ops = &dra7xx_pcie_host_ops;
+
+ pp->irq = platform_get_irq(pdev, 1);
+ if (pp->irq < 0) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(&pdev->dev, pp->irq,
+ dra7xx_pcie_msi_irq_handler, IRQF_SHARED,
+ "dra7-pcie-msi", pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ return ret;
+ }
+
+ if (!IS_ENABLED(CONFIG_PCI_MSI)) {
+ ret = dra7xx_pcie_init_irq_domain(pp);
+ if (ret < 0)
+ return ret;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbics");
+ pp->dbi_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!pp->dbi_base)
+ return -ENOMEM;
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(dra7xx->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init dra7xx_pcie_probe(struct platform_device *pdev)
+{
+ u32 reg;
+ int ret;
+ int irq;
+ int i;
+ int phy_count;
+ struct phy **phy;
+ void __iomem *base;
+ struct resource *res;
+ struct dra7xx_pcie *dra7xx;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ char name[10];
+
+ dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
+ if (!dra7xx)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+ IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+ if (ret) {
+ dev_err(dev, "failed to request irq\n");
+ return ret;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
+ base = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (!base)
+ return -ENOMEM;
+
+ phy_count = of_property_count_strings(np, "phy-names");
+ if (phy_count < 0) {
+ dev_err(dev, "unable to find the strings\n");
+ return phy_count;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy) * phy_count, GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ for (i = 0; i < phy_count; i++) {
+ snprintf(name, sizeof(name), "pcie-phy%d", i);
+ phy[i] = devm_phy_get(dev, name);
+ if (IS_ERR(phy[i]))
+ return PTR_ERR(phy[i]);
+
+ ret = phy_init(phy[i]);
+ if (ret < 0)
+ goto err_phy;
+
+ ret = phy_power_on(phy[i]);
+ if (ret < 0) {
+ phy_exit(phy[i]);
+ goto err_phy;
+ }
+ }
+
+ dra7xx->base = base;
+ dra7xx->phy = phy;
+ dra7xx->dev = dev;
+ dra7xx->phy_count = phy_count;
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "pm_runtime_get_sync failed\n");
+ goto err_phy;
+ }
+
+ reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+ reg &= ~LTSSM_EN;
+ dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+
+ platform_set_drvdata(pdev, dra7xx);
+
+ ret = add_pcie_port(dra7xx, pdev);
+ if (ret < 0)
+ goto err_add_port;
+
+ return 0;
+
+err_add_port:
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+err_phy:
+ while (--i >= 0) {
+ phy_power_off(phy[i]);
+ phy_exit(phy[i]);
+ }
+
+ return ret;
+}
+
+static int __exit dra7xx_pcie_remove(struct platform_device *pdev)
+{
+ struct dra7xx_pcie *dra7xx = platform_get_drvdata(pdev);
+ struct pcie_port *pp = &dra7xx->pp;
+ struct device *dev = &pdev->dev;
+ int count = dra7xx->phy_count;
+
+ if (pp->irq_domain)
+ irq_domain_remove(pp->irq_domain);
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+ while (count--) {
+ phy_power_off(dra7xx->phy[count]);
+ phy_exit(dra7xx->phy[count]);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_dra7xx_pcie_match[] = {
+ { .compatible = "ti,dra7-pcie", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_dra7xx_pcie_match);
+
+static struct platform_driver dra7xx_pcie_driver = {
+ .remove = __exit_p(dra7xx_pcie_remove),
+ .driver = {
+ .name = "dra7-pcie",
+ .owner = THIS_MODULE,
+ .of_match_table = of_dra7xx_pcie_match,
+ },
+};
+
+module_platform_driver_probe(dra7xx_pcie_driver, dra7xx_pcie_probe);
+
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_DESCRIPTION("TI PCIe controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index abd6578..0fb0fdb 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -25,6 +25,7 @@
*/
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/interrupt.h>
@@ -276,6 +277,7 @@
unsigned int num_supplies;
const struct tegra_pcie_soc_data *soc_data;
+ struct dentry *debugfs;
};
struct tegra_pcie_port {
@@ -1739,6 +1741,115 @@
};
MODULE_DEVICE_TABLE(of, tegra_pcie_of_match);
+static void *tegra_pcie_ports_seq_start(struct seq_file *s, loff_t *pos)
+{
+ struct tegra_pcie *pcie = s->private;
+
+ if (list_empty(&pcie->ports))
+ return NULL;
+
+ seq_printf(s, "Index Status\n");
+
+ return seq_list_start(&pcie->ports, *pos);
+}
+
+static void *tegra_pcie_ports_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ struct tegra_pcie *pcie = s->private;
+
+ return seq_list_next(v, &pcie->ports, pos);
+}
+
+static void tegra_pcie_ports_seq_stop(struct seq_file *s, void *v)
+{
+}
+
+static int tegra_pcie_ports_seq_show(struct seq_file *s, void *v)
+{
+ bool up = false, active = false;
+ struct tegra_pcie_port *port;
+ unsigned int value;
+
+ port = list_entry(v, struct tegra_pcie_port, list);
+
+ value = readl(port->base + RP_VEND_XP);
+
+ if (value & RP_VEND_XP_DL_UP)
+ up = true;
+
+ value = readl(port->base + RP_LINK_CONTROL_STATUS);
+
+ if (value & RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE)
+ active = true;
+
+ seq_printf(s, "%2u ", port->index);
+
+ if (up)
+ seq_printf(s, "up");
+
+ if (active) {
+ if (up)
+ seq_printf(s, ", ");
+
+ seq_printf(s, "active");
+ }
+
+ seq_printf(s, "\n");
+ return 0;
+}
+
+static const struct seq_operations tegra_pcie_ports_seq_ops = {
+ .start = tegra_pcie_ports_seq_start,
+ .next = tegra_pcie_ports_seq_next,
+ .stop = tegra_pcie_ports_seq_stop,
+ .show = tegra_pcie_ports_seq_show,
+};
+
+static int tegra_pcie_ports_open(struct inode *inode, struct file *file)
+{
+ struct tegra_pcie *pcie = inode->i_private;
+ struct seq_file *s;
+ int err;
+
+ err = seq_open(file, &tegra_pcie_ports_seq_ops);
+ if (err)
+ return err;
+
+ s = file->private_data;
+ s->private = pcie;
+
+ return 0;
+}
+
+static const struct file_operations tegra_pcie_ports_ops = {
+ .owner = THIS_MODULE,
+ .open = tegra_pcie_ports_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int tegra_pcie_debugfs_init(struct tegra_pcie *pcie)
+{
+ struct dentry *file;
+
+ pcie->debugfs = debugfs_create_dir("pcie", NULL);
+ if (!pcie->debugfs)
+ return -ENOMEM;
+
+ file = debugfs_create_file("ports", S_IFREG | S_IRUGO, pcie->debugfs,
+ pcie, &tegra_pcie_ports_ops);
+ if (!file)
+ goto remove;
+
+ return 0;
+
+remove:
+ debugfs_remove_recursive(pcie->debugfs);
+ pcie->debugfs = NULL;
+ return -ENOMEM;
+}
+
static int tegra_pcie_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
@@ -1793,6 +1904,13 @@
goto disable_msi;
}
+ if (IS_ENABLED(CONFIG_DEBUG_FS)) {
+ err = tegra_pcie_debugfs_init(pcie);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to setup debugfs: %d\n",
+ err);
+ }
+
platform_set_drvdata(pdev, pcie);
return 0;
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 1eaf4df..52bd3a1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -20,6 +20,7 @@
#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
+#include <linux/platform_device.h>
#include <linux/types.h>
#include "pcie-designware.h"
@@ -217,27 +218,47 @@
return 0;
}
+static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+{
+ unsigned int res, bit, val;
+
+ res = (irq / 32) * 12;
+ bit = irq % 32;
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+ val &= ~(1 << bit);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
unsigned int nvec, unsigned int pos)
{
- unsigned int i, res, bit, val;
+ unsigned int i;
for (i = 0; i < nvec; i++) {
irq_set_msi_desc_off(irq_base, i, NULL);
clear_bit(pos + i, pp->msi_irq_in_use);
/* Disable corresponding interrupt on MSI controller */
- res = ((pos + i) / 32) * 12;
- bit = (pos + i) % 32;
- dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
- val &= ~(1 << bit);
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+ if (pp->ops->msi_clear_irq)
+ pp->ops->msi_clear_irq(pp, pos + i);
+ else
+ dw_pcie_msi_clear_irq(pp, pos + i);
}
}
+static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+{
+ unsigned int res, bit, val;
+
+ res = (irq / 32) * 12;
+ bit = irq % 32;
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+ val |= 1 << bit;
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
{
- int res, bit, irq, pos0, pos1, i;
- u32 val;
+ int irq, pos0, pos1, i;
struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
if (!pp) {
@@ -281,11 +302,10 @@
}
set_bit(pos0 + i, pp->msi_irq_in_use);
/*Enable corresponding interrupt in MSI interrupt controller */
- res = ((pos0 + i) / 32) * 12;
- bit = (pos0 + i) % 32;
- dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
- val |= 1 << bit;
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+ if (pp->ops->msi_set_irq)
+ pp->ops->msi_set_irq(pp, pos0 + i);
+ else
+ dw_pcie_msi_set_irq(pp, pos0 + i);
}
*pos = pos0;
@@ -353,7 +373,10 @@
*/
desc->msi_attrib.multiple = msgvec;
- msg.address_lo = virt_to_phys((void *)pp->msi_data);
+ if (pp->ops->get_msi_data)
+ msg.address_lo = pp->ops->get_msi_data(pp);
+ else
+ msg.address_lo = virt_to_phys((void *)pp->msi_data);
msg.address_hi = 0x0;
msg.data = pos;
write_msi_msg(irq, &msg);
@@ -396,10 +419,35 @@
int __init dw_pcie_host_init(struct pcie_port *pp)
{
struct device_node *np = pp->dev->of_node;
+ struct platform_device *pdev = to_platform_device(pp->dev);
struct of_pci_range range;
struct of_pci_range_parser parser;
- u32 val;
- int i;
+ struct resource *cfg_res;
+ u32 val, na, ns;
+ const __be32 *addrp;
+ int i, index;
+
+ /* Find the address cell size and the number of cells in order to get
+ * the untranslated address.
+ */
+ of_property_read_u32(np, "#address-cells", &na);
+ ns = of_n_size_cells(np);
+
+ cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
+ if (cfg_res) {
+ pp->config.cfg0_size = resource_size(cfg_res)/2;
+ pp->config.cfg1_size = resource_size(cfg_res)/2;
+ pp->cfg0_base = cfg_res->start;
+ pp->cfg1_base = cfg_res->start + pp->config.cfg0_size;
+
+ /* Find the untranslated configuration space address */
+ index = of_property_match_string(np, "reg-names", "config");
+ addrp = of_get_address(np, index, false, false);
+ pp->cfg0_mod_base = of_read_number(addrp, ns);
+ pp->cfg1_mod_base = pp->cfg0_mod_base + pp->config.cfg0_size;
+ } else {
+ dev_err(pp->dev, "missing *config* reg space\n");
+ }
if (of_pci_range_parser_init(&parser, np)) {
dev_err(pp->dev, "missing ranges property\n");
@@ -422,17 +470,33 @@
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
pp->io_base = range.cpu_addr;
+
+ /* Find the untranslated IO space address */
+ pp->io_mod_base = of_read_number(parser.range -
+ parser.np + na, ns);
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
pp->mem.name = "MEM";
pp->config.mem_size = resource_size(&pp->mem);
pp->config.mem_bus_addr = range.pci_addr;
+
+ /* Find the untranslated MEM space address */
+ pp->mem_mod_base = of_read_number(parser.range -
+ parser.np + na, ns);
}
if (restype == 0) {
of_pci_range_to_resource(&range, np, &pp->cfg);
pp->config.cfg0_size = resource_size(&pp->cfg)/2;
pp->config.cfg1_size = resource_size(&pp->cfg)/2;
+ pp->cfg0_base = pp->cfg.start;
+ pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
+
+ /* Find the untranslated configuration space address */
+ pp->cfg0_mod_base = of_read_number(parser.range -
+ parser.np + na, ns);
+ pp->cfg1_mod_base = pp->cfg0_mod_base +
+ pp->config.cfg0_size;
}
}
@@ -445,8 +509,6 @@
}
}
- pp->cfg0_base = pp->cfg.start;
- pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
@@ -509,9 +571,9 @@
/* Program viewport 0 : OUTBOUND : CFG0 */
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
+ dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->cfg0_mod_base + pp->config.cfg0_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
@@ -525,9 +587,9 @@
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
+ dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->cfg1_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->cfg1_mod_base + pp->config.cfg1_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
@@ -540,9 +602,9 @@
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
+ dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->mem_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->mem_mod_base + pp->config.mem_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
@@ -556,9 +618,9 @@
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
+ dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE);
+ dw_pcie_writel_rc(pp, (pp->io_mod_base >> 32), PCIE_ATU_UPPER_BASE);
+ dw_pcie_writel_rc(pp, pp->io_mod_base + pp->config.io_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
@@ -656,7 +718,11 @@
}
if (bus->number != pp->root_bus_nr)
- ret = dw_pcie_rd_other_conf(pp, bus, devfn,
+ if (pp->ops->rd_other_conf)
+ ret = pp->ops->rd_other_conf(pp, bus, devfn,
+ where, size, val);
+ else
+ ret = dw_pcie_rd_other_conf(pp, bus, devfn,
where, size, val);
else
ret = dw_pcie_rd_own_conf(pp, where, size, val);
@@ -679,7 +745,11 @@
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number != pp->root_bus_nr)
- ret = dw_pcie_wr_other_conf(pp, bus, devfn,
+ if (pp->ops->wr_other_conf)
+ ret = pp->ops->wr_other_conf(pp, bus, devfn,
+ where, size, val);
+ else
+ ret = dw_pcie_wr_other_conf(pp, bus, devfn,
where, size, val);
else
ret = dw_pcie_wr_own_conf(pp, where, size, val);
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 77f592f..daf81f9 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -36,11 +36,15 @@
u8 root_bus_nr;
void __iomem *dbi_base;
u64 cfg0_base;
+ u64 cfg0_mod_base;
void __iomem *va_cfg0_base;
u64 cfg1_base;
+ u64 cfg1_mod_base;
void __iomem *va_cfg1_base;
u64 io_base;
+ u64 io_mod_base;
u64 mem_base;
+ u64 mem_mod_base;
struct resource cfg;
struct resource io;
struct resource mem;
@@ -61,8 +65,15 @@
u32 val, void __iomem *dbi_base);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
+ int (*rd_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val);
+ int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
void (*host_init)(struct pcie_port *pp);
+ void (*msi_set_irq)(struct pcie_port *pp, int irq);
+ void (*msi_clear_irq)(struct pcie_port *pp, int irq);
+ u32 (*get_msi_data)(struct pcie_port *pp);
};
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index a53a689..8c6fd8d 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -620,8 +620,7 @@
} else
seq_printf(s, " %-9s", chip->get(chip, offset) ? "hi" : "lo");
- if (pctldev)
- mode = abx500_get_mode(pctldev, chip, offset);
+ mode = abx500_get_mode(pctldev, chip, offset);
seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]);
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index af1ba4f..60464a2 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -497,10 +497,10 @@
static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
{
if (pin->mux) {
- dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
+ dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n",
pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
} else {
- dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
+ dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n",
pin->bank + 'A', pin->pin, pin->conf);
}
}
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 5e8b2e0..0c372a3 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -438,7 +438,7 @@
int reg, ret, mask;
unsigned long flags;
u8 bit;
- u32 data;
+ u32 data, rmask;
if (iomux_num > 3)
return -EINVAL;
@@ -478,8 +478,9 @@
spin_lock_irqsave(&bank->slock, flags);
data = (mask << (bit + 16));
+ rmask = data | (data >> 16);
data |= (mux & mask) << bit;
- ret = regmap_write(regmap, reg, data);
+ ret = regmap_update_bits(regmap, reg, rmask, data);
spin_unlock_irqrestore(&bank->slock, flags);
@@ -634,7 +635,7 @@
struct regmap *regmap;
unsigned long flags;
int reg, ret, i;
- u32 data;
+ u32 data, rmask;
u8 bit;
rk3288_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit);
@@ -657,9 +658,10 @@
/* enable the write to the equivalent lower bits */
data = ((1 << RK3288_DRV_BITS_PER_PIN) - 1) << (bit + 16);
+ rmask = data | (data >> 16);
data |= (ret << bit);
- ret = regmap_write(regmap, reg, data);
+ ret = regmap_update_bits(regmap, reg, rmask, data);
spin_unlock_irqrestore(&bank->slock, flags);
return ret;
@@ -722,7 +724,7 @@
int reg, ret;
unsigned long flags;
u8 bit;
- u32 data;
+ u32 data, rmask;
dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n",
bank->bank_num, pin_num, pull);
@@ -750,6 +752,7 @@
/* enable the write to the equivalent lower bits */
data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16);
+ rmask = data | (data >> 16);
switch (pull) {
case PIN_CONFIG_BIAS_DISABLE:
@@ -770,7 +773,7 @@
return -EINVAL;
}
- ret = regmap_write(regmap, reg, data);
+ ret = regmap_update_bits(regmap, reg, rmask, data);
spin_unlock_irqrestore(&bank->slock, flags);
break;
diff --git a/drivers/pinctrl/pinctrl-tegra-xusb.c b/drivers/pinctrl/pinctrl-tegra-xusb.c
index a066204..e641b42 100644
--- a/drivers/pinctrl/pinctrl-tegra-xusb.c
+++ b/drivers/pinctrl/pinctrl-tegra-xusb.c
@@ -680,7 +680,7 @@
if (args->args_count <= 0)
return ERR_PTR(-EINVAL);
- if (index > ARRAY_SIZE(padctl->phys))
+ if (index >= ARRAY_SIZE(padctl->phys))
return ERR_PTR(-EINVAL);
return padctl->phys[index];
@@ -930,7 +930,8 @@
padctl->provider = devm_of_phy_provider_register(&pdev->dev,
tegra_xusb_padctl_xlate);
- if (err < 0) {
+ if (IS_ERR(padctl->provider)) {
+ err = PTR_ERR(padctl->provider);
dev_err(&pdev->dev, "failed to register PHYs: %d\n", err);
goto unregister;
}
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 003bfd8..d7154ed 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -127,14 +127,10 @@
struct irq_chip *chip = irq_data_get_irq_chip(irqd);
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
- struct samsung_pin_bank_type *bank_type = bank->type;
struct samsung_pinctrl_drv_data *d = bank->drvdata;
- unsigned int pin = irqd->hwirq;
- unsigned int shift = EXYNOS_EINT_CON_LEN * pin;
+ unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
unsigned int con, trig_type;
unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
- unsigned long flags;
- unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
@@ -167,8 +163,32 @@
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
+ return 0;
+}
+
+static int exynos_irq_request_resources(struct irq_data *irqd)
+{
+ struct irq_chip *chip = irq_data_get_irq_chip(irqd);
+ struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+ struct samsung_pin_bank_type *bank_type = bank->type;
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
+ unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
+ unsigned long flags;
+ unsigned int mask;
+ unsigned int con;
+ int ret;
+
+ ret = gpio_lock_as_irq(&bank->gpio_chip, irqd->hwirq);
+ if (ret) {
+ dev_err(bank->gpio_chip.dev, "unable to lock pin %s-%lu IRQ\n",
+ bank->name, irqd->hwirq);
+ return ret;
+ }
+
reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC];
- shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC];
+ shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
spin_lock_irqsave(&bank->slock, flags);
@@ -180,9 +200,42 @@
spin_unlock_irqrestore(&bank->slock, flags);
+ exynos_irq_unmask(irqd);
+
return 0;
}
+static void exynos_irq_release_resources(struct irq_data *irqd)
+{
+ struct irq_chip *chip = irq_data_get_irq_chip(irqd);
+ struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
+ struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+ struct samsung_pin_bank_type *bank_type = bank->type;
+ struct samsung_pinctrl_drv_data *d = bank->drvdata;
+ unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq;
+ unsigned long reg_con = our_chip->eint_con + bank->eint_offset;
+ unsigned long flags;
+ unsigned int mask;
+ unsigned int con;
+
+ reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC];
+ shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC];
+ mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
+
+ exynos_irq_mask(irqd);
+
+ spin_lock_irqsave(&bank->slock, flags);
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(mask << shift);
+ con |= FUNC_INPUT << shift;
+ writel(con, d->virt_base + reg_con);
+
+ spin_unlock_irqrestore(&bank->slock, flags);
+
+ gpio_unlock_as_irq(&bank->gpio_chip, irqd->hwirq);
+}
+
/*
* irq_chip for gpio interrupts.
*/
@@ -193,6 +246,8 @@
.irq_mask = exynos_irq_mask,
.irq_ack = exynos_irq_ack,
.irq_set_type = exynos_irq_set_type,
+ .irq_request_resources = exynos_irq_request_resources,
+ .irq_release_resources = exynos_irq_release_resources,
},
.eint_con = EXYNOS_GPIO_ECON_OFFSET,
.eint_mask = EXYNOS_GPIO_EMASK_OFFSET,
@@ -336,6 +391,8 @@
.irq_ack = exynos_irq_ack,
.irq_set_type = exynos_irq_set_type,
.irq_set_wake = exynos_wkup_irq_set_wake,
+ .irq_request_resources = exynos_irq_request_resources,
+ .irq_release_resources = exynos_irq_release_resources,
},
.eint_con = EXYNOS_WKUP_ECON_OFFSET,
.eint_mask = EXYNOS_WKUP_EMASK_OFFSET,
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 2b88232..5cedc9d 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -26,6 +26,7 @@
#include <linux/gpio.h>
/* pinmux function number for pin as gpio output line */
+#define FUNC_INPUT 0x0
#define FUNC_OUTPUT 0x1
/**
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index 576d41b..c6e5deb 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -4509,24 +4509,24 @@
};
static const char * const can0_groups[] = {
- "can0_data_a",
+ "can0_data",
"can0_data_b",
"can0_data_c",
"can0_data_d",
"can0_data_e",
"can0_data_f",
- "can_clk_a",
+ "can_clk",
"can_clk_b",
"can_clk_c",
"can_clk_d",
};
static const char * const can1_groups[] = {
- "can1_data_a",
+ "can1_data",
"can1_data_b",
"can1_data_c",
"can1_data_d",
- "can_clk_a",
+ "can_clk",
"can_clk_b",
"can_clk_c",
"can_clk_d",
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index e4da61b..b062d3d 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -1258,7 +1258,7 @@
int mode = -1;
int time = -1;
- if (sscanf(buf, "%i", &mode) != 1 || (mode != 2 || mode != 1))
+ if (sscanf(buf, "%i", &mode) != 1 && (mode != 2 || mode != 1))
return -EINVAL;
/* Set the Keyboard Backlight Mode where:
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 4b66bf0..d2c3592 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -606,6 +606,8 @@
unsigned int best = 0;
struct pwm_lookup *p;
unsigned int match;
+ unsigned int period;
+ enum pwm_polarity polarity;
/* look up via DT first */
if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
@@ -653,6 +655,8 @@
if (match > best) {
chip = pwmchip_find_by_name(p->provider);
index = p->index;
+ period = p->period;
+ polarity = p->polarity;
if (match != 3)
best = match;
@@ -668,8 +672,8 @@
if (IS_ERR(pwm))
return pwm;
- pwm_set_period(pwm, p->period);
- pwm_set_polarity(pwm, p->polarity);
+ pwm_set_period(pwm, period);
+ pwm_set_polarity(pwm, polarity);
return pwm;
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 8f06250..8754c33 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -717,12 +717,14 @@
info->device_type = s5m87xx->device_type;
info->wtsr_smpl = s5m87xx->wtsr_smpl;
- info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
- if (info->irq <= 0) {
- ret = -EINVAL;
- dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
+ if (s5m87xx->irq_data) {
+ info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq);
+ if (info->irq <= 0) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n",
alarm_irq);
- goto err;
+ goto err;
+ }
}
platform_set_drvdata(pdev, info);
@@ -744,6 +746,11 @@
goto err;
}
+ if (!info->irq) {
+ dev_info(&pdev->dev, "Alarm IRQ not available\n");
+ return 0;
+ }
+
ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
s5m_rtc_alarm_irq, 0, "rtc-alarm0",
info);
@@ -802,7 +809,7 @@
struct s5m_rtc_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (device_may_wakeup(dev))
+ if (info->irq && device_may_wakeup(dev))
ret = disable_irq_wake(info->irq);
return ret;
@@ -813,7 +820,7 @@
struct s5m_rtc_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (device_may_wakeup(dev))
+ if (info->irq && device_may_wakeup(dev))
ret = enable_irq_wake(info->irq);
return ret;
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index a6d47e5..c43aca6 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1035,12 +1035,26 @@
const unsigned char *buf, int count)
{
struct raw3215_info *raw;
+ int i, written;
if (!tty)
return 0;
raw = (struct raw3215_info *) tty->driver_data;
- raw3215_write(raw, buf, count);
- return count;
+ written = count;
+ while (count > 0) {
+ for (i = 0; i < count; i++)
+ if (buf[i] == '\t' || buf[i] == '\n')
+ break;
+ raw3215_write(raw, buf, i);
+ count -= i;
+ buf += i;
+ if (count > 0) {
+ raw3215_putchar(raw, *buf);
+ count--;
+ buf++;
+ }
+ }
+ return written;
}
/*
@@ -1188,7 +1202,7 @@
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
driver->init_termios.c_iflag = IGNBRK | IGNPAR;
- driver->init_termios.c_oflag = ONLCR | XTABS;
+ driver->init_termios.c_oflag = ONLCR;
driver->init_termios.c_lflag = ISIG;
driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &tty3215_ops);
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 7ed7a59..0036632 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -559,7 +559,7 @@
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
driver->init_termios.c_iflag = IGNBRK | IGNPAR;
- driver->init_termios.c_oflag = ONLCR | XTABS;
+ driver->init_termios.c_oflag = ONLCR;
driver->init_termios.c_lflag = ISIG | ECHO;
driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &sclp_ops);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index df33060..d81f3cc 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -377,6 +377,10 @@
pool->slab_flags |= SLAB_CACHE_DMA;
pool->gfp_mask = __GFP_DMA;
}
+
+ if (hostt->cmd_size)
+ hostt->cmd_pool = pool;
+
return pool;
}
@@ -421,8 +425,10 @@
out_free_slab:
kmem_cache_destroy(pool->cmd_slab);
out_free_pool:
- if (hostt->cmd_size)
+ if (hostt->cmd_size) {
scsi_free_host_cmd_pool(pool);
+ hostt->cmd_pool = NULL;
+ }
goto out;
}
@@ -444,8 +450,10 @@
if (!--pool->users) {
kmem_cache_destroy(pool->cmd_slab);
kmem_cache_destroy(pool->sense_slab);
- if (hostt->cmd_size)
+ if (hostt->cmd_size) {
scsi_free_host_cmd_pool(pool);
+ hostt->cmd_pool = NULL;
+ }
}
mutex_unlock(&host_cmd_pool_mutex);
}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9c44392..d837dc1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1774,7 +1774,7 @@
blk_requeue_request(q, req);
atomic_dec(&sdev->device_busy);
out_delay:
- if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
+ if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
blk_delay_queue(q, SCSI_QUEUE_DELAY);
}
@@ -1808,7 +1808,6 @@
cmd->tag = req->tag;
- req->cmd = req->__cmd;
cmd->cmnd = req->cmd;
cmd->prot_op = SCSI_PROT_NORMAL;
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 788ed9b..114203f 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -1,8 +1,7 @@
#
# Makefile for the SuperH specific drivers.
#
-obj-$(CONFIG_SUPERH) += intc/
-obj-$(CONFIG_ARCH_SHMOBILE_LEGACY) += intc/
+obj-$(CONFIG_SH_INTC) += intc/
ifneq ($(CONFIG_COMMON_CLK),y)
obj-$(CONFIG_HAVE_CLK) += clk/
endif
diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig
index 60228fa..6a1b05d 100644
--- a/drivers/sh/intc/Kconfig
+++ b/drivers/sh/intc/Kconfig
@@ -1,7 +1,9 @@
config SH_INTC
- def_bool y
+ bool
select IRQ_DOMAIN
+if SH_INTC
+
comment "Interrupt controller options"
config INTC_USERIMASK
@@ -37,3 +39,5 @@
between system IRQs and the per-controller id tables.
If in doubt, say N.
+
+endif
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index 40c3d43..f40b34c 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -945,7 +945,7 @@
spi_bitbang_stop(&hw->bitbang);
free_irq(hw->irq, hw);
iounmap((void __iomem *)hw->regs);
- release_mem_region(r->start, sizeof(psc_spi_t));
+ release_mem_region(hw->ioarea->start, sizeof(psc_spi_t));
if (hw->usedma) {
au1550_spi_dma_rxtmp_free(hw);
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 276a388..48f1d26 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -417,16 +417,16 @@
flags, dev_name(&spi->dev));
internal_cs = false;
}
- }
- if (retval) {
- dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
- spi->cs_gpio, retval);
- return retval;
- }
+ if (retval) {
+ dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
+ spi->cs_gpio, retval);
+ return retval;
+ }
- if (internal_cs)
- set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
+ if (internal_cs)
+ set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
+ }
if (spi->mode & SPI_READY)
set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 3f3dc12..e149604 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -62,6 +62,8 @@
if (ret)
return ret;
+ dws->regs = pcim_iomap_table(pdev)[pci_bar];
+
dws->bus_num = 0;
dws->num_cs = 4;
dws->irq = pdev->irq;
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 29f3314..670f062 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -271,7 +271,7 @@
transfer_list);
if (!last_transfer->cs_change)
- spi_chip_sel(dws, dws->cur_msg->spi, 0);
+ spi_chip_sel(dws, msg->spi, 0);
spi_finalize_current_message(dws->master);
}
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 68441fa..352eed7 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -329,7 +329,8 @@
disable_fifo:
if (t->rx_buf != NULL)
chconf &= ~OMAP2_MCSPI_CHCONF_FFER;
- else
+
+ if (t->tx_buf != NULL)
chconf &= ~OMAP2_MCSPI_CHCONF_FFET;
mcspi_write_chconf0(spi, chconf);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index fe79210..46f45ca 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1074,6 +1074,7 @@
{ "INT3430", 0 },
{ "INT3431", 0 },
{ "80860F0E", 0 },
+ { "8086228E", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index c074360..cd0e08b0 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -499,7 +499,7 @@
}
/* div doesn't support odd number */
- div = rs->max_freq / rs->speed;
+ div = max_t(u32, rs->max_freq / rs->speed, 1);
div = (div + 1) & 0xfffe;
spi_enable_chip(rs, 0);
@@ -678,7 +678,7 @@
rs->dma_tx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_TXDR);
rs->dma_rx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_RXDR);
rs->dma_tx.direction = DMA_MEM_TO_DEV;
- rs->dma_tx.direction = DMA_DEV_TO_MEM;
+ rs->dma_rx.direction = DMA_DEV_TO_MEM;
master->can_dma = rockchip_spi_can_dma;
master->dma_tx = rs->dma_tx.ch;
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index c850dfd..ad87a98 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -472,25 +472,52 @@
dma_cookie_t cookie;
int ret;
- if (tx) {
- desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
- tx->sgl, tx->nents, DMA_TO_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_tx)
- goto no_dma;
-
- irq_mask |= SPCR_SPTIE;
- }
+ /* First prepare and submit the DMA request(s), as this may fail */
if (rx) {
desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
rx->sgl, rx->nents, DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_rx)
- goto no_dma;
+ if (!desc_rx) {
+ ret = -EAGAIN;
+ goto no_dma_rx;
+ }
+
+ desc_rx->callback = rspi_dma_complete;
+ desc_rx->callback_param = rspi;
+ cookie = dmaengine_submit(desc_rx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_rx;
+ }
irq_mask |= SPCR_SPRIE;
}
+ if (tx) {
+ desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
+ tx->sgl, tx->nents, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx) {
+ ret = -EAGAIN;
+ goto no_dma_tx;
+ }
+
+ if (rx) {
+ /* No callback */
+ desc_tx->callback = NULL;
+ } else {
+ desc_tx->callback = rspi_dma_complete;
+ desc_tx->callback_param = rspi;
+ }
+ cookie = dmaengine_submit(desc_tx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_tx;
+ }
+
+ irq_mask |= SPCR_SPTIE;
+ }
+
/*
* DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
* called. So, this driver disables the IRQ while DMA transfer.
@@ -503,34 +530,24 @@
rspi_enable_irq(rspi, irq_mask);
rspi->dma_callbacked = 0;
- if (rx) {
- desc_rx->callback = rspi_dma_complete;
- desc_rx->callback_param = rspi;
- cookie = dmaengine_submit(desc_rx);
- if (dma_submit_error(cookie))
- return cookie;
+ /* Now start DMA */
+ if (rx)
dma_async_issue_pending(rspi->master->dma_rx);
- }
- if (tx) {
- if (rx) {
- /* No callback */
- desc_tx->callback = NULL;
- } else {
- desc_tx->callback = rspi_dma_complete;
- desc_tx->callback_param = rspi;
- }
- cookie = dmaengine_submit(desc_tx);
- if (dma_submit_error(cookie))
- return cookie;
+ if (tx)
dma_async_issue_pending(rspi->master->dma_tx);
- }
ret = wait_event_interruptible_timeout(rspi->wait,
rspi->dma_callbacked, HZ);
if (ret > 0 && rspi->dma_callbacked)
ret = 0;
- else if (!ret)
+ else if (!ret) {
+ dev_err(&rspi->master->dev, "DMA timeout\n");
ret = -ETIMEDOUT;
+ if (tx)
+ dmaengine_terminate_all(rspi->master->dma_tx);
+ if (rx)
+ dmaengine_terminate_all(rspi->master->dma_rx);
+ }
rspi_disable_irq(rspi, irq_mask);
@@ -541,11 +558,16 @@
return ret;
-no_dma:
- pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
- dev_driver_string(&rspi->master->dev),
- dev_name(&rspi->master->dev));
- return -EAGAIN;
+no_dma_tx:
+ if (rx)
+ dmaengine_terminate_all(rspi->master->dma_rx);
+no_dma_rx:
+ if (ret == -EAGAIN) {
+ pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
+ dev_driver_string(&rspi->master->dev),
+ dev_name(&rspi->master->dev));
+ }
+ return ret;
}
static void rspi_receive_init(const struct rspi_data *rspi)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 2a4354d..543075b 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -636,6 +636,26 @@
dma_cookie_t cookie;
int ret;
+ /* First prepare and submit the DMA request(s), as this may fail */
+ if (rx) {
+ ier_bits |= IER_RDREQE | IER_RDMAE;
+ desc_rx = dmaengine_prep_slave_single(p->master->dma_rx,
+ p->rx_dma_addr, len, DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_rx) {
+ ret = -EAGAIN;
+ goto no_dma_rx;
+ }
+
+ desc_rx->callback = sh_msiof_dma_complete;
+ desc_rx->callback_param = p;
+ cookie = dmaengine_submit(desc_rx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_rx;
+ }
+ }
+
if (tx) {
ier_bits |= IER_TDREQE | IER_TDMAE;
dma_sync_single_for_device(p->master->dma_tx->device->dev,
@@ -643,17 +663,23 @@
desc_tx = dmaengine_prep_slave_single(p->master->dma_tx,
p->tx_dma_addr, len, DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_tx)
- return -EAGAIN;
- }
+ if (!desc_tx) {
+ ret = -EAGAIN;
+ goto no_dma_tx;
+ }
- if (rx) {
- ier_bits |= IER_RDREQE | IER_RDMAE;
- desc_rx = dmaengine_prep_slave_single(p->master->dma_rx,
- p->rx_dma_addr, len, DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_rx)
- return -EAGAIN;
+ if (rx) {
+ /* No callback */
+ desc_tx->callback = NULL;
+ } else {
+ desc_tx->callback = sh_msiof_dma_complete;
+ desc_tx->callback_param = p;
+ }
+ cookie = dmaengine_submit(desc_tx);
+ if (dma_submit_error(cookie)) {
+ ret = cookie;
+ goto no_dma_tx;
+ }
}
/* 1 stage FIFO watermarks for DMA */
@@ -666,37 +692,16 @@
reinit_completion(&p->done);
- if (rx) {
- desc_rx->callback = sh_msiof_dma_complete;
- desc_rx->callback_param = p;
- cookie = dmaengine_submit(desc_rx);
- if (dma_submit_error(cookie)) {
- ret = cookie;
- goto stop_ier;
- }
+ /* Now start DMA */
+ if (rx)
dma_async_issue_pending(p->master->dma_rx);
- }
-
- if (tx) {
- if (rx) {
- /* No callback */
- desc_tx->callback = NULL;
- } else {
- desc_tx->callback = sh_msiof_dma_complete;
- desc_tx->callback_param = p;
- }
- cookie = dmaengine_submit(desc_tx);
- if (dma_submit_error(cookie)) {
- ret = cookie;
- goto stop_rx;
- }
+ if (tx)
dma_async_issue_pending(p->master->dma_tx);
- }
ret = sh_msiof_spi_start(p, rx);
if (ret) {
dev_err(&p->pdev->dev, "failed to start hardware\n");
- goto stop_tx;
+ goto stop_dma;
}
/* wait for tx fifo to be emptied / rx fifo to be filled */
@@ -726,14 +731,14 @@
stop_reset:
sh_msiof_reset_str(p);
sh_msiof_spi_stop(p, rx);
-stop_tx:
+stop_dma:
if (tx)
dmaengine_terminate_all(p->master->dma_tx);
-stop_rx:
+no_dma_tx:
if (rx)
dmaengine_terminate_all(p->master->dma_rx);
-stop_ier:
sh_msiof_write(p, IER, 0);
+no_dma_rx:
return ret;
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index e0531ba..ca935df 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -848,6 +848,7 @@
/**
* spi_finalize_current_transfer - report completion of a transfer
+ * @master: the master reporting completion
*
* Called by SPI drivers using the core transfer_one_message()
* implementation to notify it that the current interrupt driven
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 2c486ea..35b494f 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -28,8 +28,6 @@
source "drivers/staging/slicoss/Kconfig"
-source "drivers/staging/usbip/Kconfig"
-
source "drivers/staging/wlan-ng/Kconfig"
source "drivers/staging/comedi/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 1e1a3a1..e66a5db 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -6,7 +6,6 @@
obj-y += media/
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
-obj-$(CONFIG_USBIP_CORE) += usbip/
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
obj-$(CONFIG_COMEDI) += comedi/
obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/
diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c
index 9b47e66..0bf0d24 100644
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@@ -790,7 +790,7 @@
if (unlikely(ret)) {
pr_err("failed to register misc device for log '%s'!\n",
log->misc.name);
- goto out_free_log;
+ goto out_free_misc_name;
}
pr_info("created %luK log '%s'\n",
@@ -798,6 +798,9 @@
return 0;
+out_free_misc_name:
+ kfree(log->misc.name);
+
out_free_log:
kfree(log);
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 8bf1eb4..831b7c6 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1421,22 +1421,16 @@
* @reg: the register to read
* @value: 16-bit value to write
*/
-static int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
+static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg,
+ u16 value)
{
struct mac_regs __iomem *mac = &adapter->regs->mac;
- struct phy_device *phydev = adapter->phydev;
int status = 0;
- u8 addr;
u32 delay = 0;
u32 mii_addr;
u32 mii_cmd;
u32 mii_indicator;
- if (!phydev)
- return -EIO;
-
- addr = phydev->addr;
-
/* Save a local copy of the registers we are dealing with so we can
* set them back
*/
@@ -1631,17 +1625,7 @@
struct net_device *netdev = bus->priv;
struct et131x_adapter *adapter = netdev_priv(netdev);
- return et131x_mii_write(adapter, reg, value);
-}
-
-static int et131x_mdio_reset(struct mii_bus *bus)
-{
- struct net_device *netdev = bus->priv;
- struct et131x_adapter *adapter = netdev_priv(netdev);
-
- et131x_mii_write(adapter, MII_BMCR, BMCR_RESET);
-
- return 0;
+ return et131x_mii_write(adapter, phy_addr, reg, value);
}
/* et1310_phy_power_switch - PHY power control
@@ -1656,18 +1640,20 @@
static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down)
{
u16 data;
+ struct phy_device *phydev = adapter->phydev;
et131x_mii_read(adapter, MII_BMCR, &data);
data &= ~BMCR_PDOWN;
if (down)
data |= BMCR_PDOWN;
- et131x_mii_write(adapter, MII_BMCR, data);
+ et131x_mii_write(adapter, phydev->addr, MII_BMCR, data);
}
/* et131x_xcvr_init - Init the phy if we are setting it into force mode */
static void et131x_xcvr_init(struct et131x_adapter *adapter)
{
u16 lcr2;
+ struct phy_device *phydev = adapter->phydev;
/* Set the LED behavior such that LED 1 indicates speed (off =
* 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
@@ -1688,7 +1674,7 @@
else
lcr2 |= (LED_VAL_LINKON << LED_TXRX_SHIFT);
- et131x_mii_write(adapter, PHY_LED_2, lcr2);
+ et131x_mii_write(adapter, phydev->addr, PHY_LED_2, lcr2);
}
}
@@ -3643,14 +3629,14 @@
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
®ister18);
- et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
- register18 | 0x4);
- et131x_mii_write(adapter, PHY_INDEX_REG,
+ et131x_mii_write(adapter, phydev->addr,
+ PHY_MPHY_CONTROL_REG, register18 | 0x4);
+ et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG,
register18 | 0x8402);
- et131x_mii_write(adapter, PHY_DATA_REG,
+ et131x_mii_write(adapter, phydev->addr, PHY_DATA_REG,
register18 | 511);
- et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
- register18);
+ et131x_mii_write(adapter, phydev->addr,
+ PHY_MPHY_CONTROL_REG, register18);
}
et1310_config_flow_control(adapter);
@@ -3662,7 +3648,8 @@
et131x_mii_read(adapter, PHY_CONFIG, ®);
reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH;
reg |= ET_PHY_CONFIG_FIFO_DEPTH_32;
- et131x_mii_write(adapter, PHY_CONFIG, reg);
+ et131x_mii_write(adapter, phydev->addr, PHY_CONFIG,
+ reg);
}
et131x_set_rx_dma_timer(adapter);
@@ -3675,14 +3662,14 @@
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
®ister18);
- et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
- register18 | 0x4);
- et131x_mii_write(adapter, PHY_INDEX_REG,
- register18 | 0x8402);
- et131x_mii_write(adapter, PHY_DATA_REG,
- register18 | 511);
- et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
- register18);
+ et131x_mii_write(adapter, phydev->addr,
+ PHY_MPHY_CONTROL_REG, register18 | 0x4);
+ et131x_mii_write(adapter, phydev->addr,
+ PHY_INDEX_REG, register18 | 0x8402);
+ et131x_mii_write(adapter, phydev->addr,
+ PHY_DATA_REG, register18 | 511);
+ et131x_mii_write(adapter, phydev->addr,
+ PHY_MPHY_CONTROL_REG, register18);
}
/* Free the packets being actively sent & stopped */
@@ -4644,10 +4631,6 @@
/* Copy address into the net_device struct */
memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
- /* Init variable for counting how long we do not have link status */
- adapter->boot_coma = 0;
- et1310_disable_phy_coma(adapter);
-
rc = -ENOMEM;
/* Setup the mii_bus struct */
@@ -4663,7 +4646,6 @@
adapter->mii_bus->priv = netdev;
adapter->mii_bus->read = et131x_mdio_read;
adapter->mii_bus->write = et131x_mdio_write;
- adapter->mii_bus->reset = et131x_mdio_reset;
adapter->mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int),
GFP_KERNEL);
if (!adapter->mii_bus->irq)
@@ -4687,6 +4669,10 @@
/* Setup et1310 as per the documentation */
et131x_adapter_setup(adapter);
+ /* Init variable for counting how long we do not have link status */
+ adapter->boot_coma = 0;
+ et1310_disable_phy_coma(adapter);
+
/* We can enable interrupts now
*
* NOTE - Because registration of interrupt handler is done in the
diff --git a/drivers/staging/lustre/lustre/libcfs/workitem.c b/drivers/staging/lustre/lustre/libcfs/workitem.c
index 6562957..03ab9e0 100644
--- a/drivers/staging/lustre/lustre/libcfs/workitem.c
+++ b/drivers/staging/lustre/lustre/libcfs/workitem.c
@@ -365,6 +365,7 @@
return -ENOMEM;
strncpy(sched->ws_name, name, CFS_WS_NAME_LEN);
+ sched->ws_name[CFS_WS_NAME_LEN - 1] = '\0';
sched->ws_cptab = cptab;
sched->ws_cpt = cpt;
diff --git a/drivers/staging/lustre/lustre/obdclass/class_obd.c b/drivers/staging/lustre/lustre/obdclass/class_obd.c
index 8b19f3c..701c6a7 100644
--- a/drivers/staging/lustre/lustre/obdclass/class_obd.c
+++ b/drivers/staging/lustre/lustre/obdclass/class_obd.c
@@ -35,7 +35,7 @@
*/
#define DEBUG_SUBSYSTEM S_CLASS
-# include <asm/atomic.h>
+# include <linux/atomic.h>
#include "../include/obd_support.h"
#include "../include/obd_class.h"
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index b8676ac..407a318 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -43,9 +43,11 @@
{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */
/*=== Customer ID ===*/
/****** 8188EUS ********/
+ {USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */
{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
+ {USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
{} /* Terminating entry */
};
diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c
index 8fcf8a7..9562cd0 100644
--- a/drivers/thunderbolt/path.c
+++ b/drivers/thunderbolt/path.c
@@ -150,7 +150,26 @@
/* Activate hops. */
for (i = path->path_length - 1; i >= 0; i--) {
- struct tb_regs_hop hop;
+ struct tb_regs_hop hop = { 0 };
+
+ /*
+ * We do (currently) not tear down paths setup by the firmeware.
+ * If a firmware device is unplugged and plugged in again then
+ * it can happen that we reuse some of the hops from the (now
+ * defunct) firmeware path. This causes the hotplug operation to
+ * fail (the pci device does not show up). Clearing the hop
+ * before overwriting it fixes the problem.
+ *
+ * Should be removed once we discover and tear down firmeware
+ * paths.
+ */
+ res = tb_port_write(path->hops[i].in_port, &hop, TB_CFG_HOPS,
+ 2 * path->hops[i].in_hop_index, 2);
+ if (res) {
+ __tb_path_deactivate_hops(path, i);
+ __tb_path_deallocate_nfc(path, 0);
+ goto err;
+ }
/* dword 0 */
hop.next_hop = path->hops[i].next_hop_index;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index e0cad44..cf1b19b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -92,6 +92,8 @@
source "drivers/usb/image/Kconfig"
+source "drivers/usb/usbip/Kconfig"
+
endif
source "drivers/usb/musb/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 3cba892..d7be717 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -60,3 +60,5 @@
obj-$(CONFIG_USB_GADGET) += gadget/
obj-$(CONFIG_USB_COMMON) += common/
+
+obj-$(CONFIG_USBIP_CORE) += usbip/
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8a4dcbc..46f5161 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1728,8 +1728,14 @@
* - Change autosuspend delay of hub can avoid unnecessary auto
* suspend timer for hub, also may decrease power consumption
* of USB bus.
+ *
+ * - If user has indicated to prevent autosuspend by passing
+ * usbcore.autosuspend = -1 then keep autosuspend disabled.
*/
- pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+#ifdef CONFIG_PM_RUNTIME
+ if (hdev->dev.power.autosuspend_delay >= 0)
+ pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+#endif
/*
* Hubs have proper suspend/resume support, except for root hubs
@@ -2107,8 +2113,8 @@
{
struct usb_port *port_dev = NULL;
struct usb_device *udev = *pdev;
- struct usb_hub *hub;
- int port1;
+ struct usb_hub *hub = NULL;
+ int port1 = 1;
/* mark the device as inactive, so any further urb submissions for
* this device (and any of its children) will fail immediately.
@@ -4631,9 +4637,7 @@
if (status != -ENODEV &&
port1 != unreliable_port &&
printk_ratelimit())
- dev_err(&udev->dev, "connect-debounce failed, port %d disabled\n",
- port1);
-
+ dev_err(&port_dev->dev, "connect-debounce failed\n");
portstatus &= ~USB_PORT_STAT_CONNECTION;
unreliable_port = port1;
} else {
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 0ba9c33..7c9618e 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1901,7 +1901,7 @@
static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
{
u32 dsts = readl(hsotg->regs + DSTS);
- int ep0_mps = 0, ep_mps;
+ int ep0_mps = 0, ep_mps = 8;
/*
* This should signal the finish of the enumeration phase
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index ef4936f..9dcfbe7 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -425,7 +425,7 @@
static int dwc3_omap_extcon_register(struct dwc3_omap *omap)
{
- u32 ret;
+ int ret;
struct device_node *node = omap->dev->of_node;
struct extcon_dev *edev;
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index a186afe..9add915 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -3,7 +3,7 @@
#
subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG
-ccflags-y += -I$(PWD)/drivers/usb/gadget/udc
+ccflags-y += -Idrivers/usb/gadget/udc
obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o
libcomposite-y := usbstring.o config.o epautoconf.o
diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile
index 6d91f21..83ae106 100644
--- a/drivers/usb/gadget/function/Makefile
+++ b/drivers/usb/gadget/function/Makefile
@@ -2,8 +2,8 @@
# USB peripheral controller drivers
#
-ccflags-y := -I$(PWD)/drivers/usb/gadget/
-ccflags-y += -I$(PWD)/drivers/usb/gadget/udc/
+ccflags-y := -Idrivers/usb/gadget/
+ccflags-y += -Idrivers/usb/gadget/udc/
# USB Functions
usb_f_acm-y := f_acm.o
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index d50adda..6e6f876 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -1127,10 +1127,7 @@
DBG(dev, "%s\n", __func__);
- netif_tx_lock(dev->net);
netif_stop_queue(dev->net);
- netif_tx_unlock(dev->net);
-
netif_carrier_off(dev->net);
/* disable endpoints, forcing (synchronous) completion
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index 71e896d..a5eb9a3 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -195,6 +195,7 @@
printk(KERN_INFO "Failed to queue request (%d).\n", ret);
usb_ep_set_halt(ep);
spin_unlock_irqrestore(&video->queue.irqlock, flags);
+ uvc_queue_cancel(queue, 0);
goto requeue;
}
spin_unlock_irqrestore(&video->queue.irqlock, flags);
@@ -281,6 +282,7 @@
static int
uvc_video_pump(struct uvc_video *video)
{
+ struct uvc_video_queue *queue = &video->queue;
struct usb_request *req;
struct uvc_buffer *buf;
unsigned long flags;
@@ -322,6 +324,7 @@
printk(KERN_INFO "Failed to queue request (%d)\n", ret);
usb_ep_set_halt(video->ep);
spin_unlock_irqrestore(&video->queue.irqlock, flags);
+ uvc_queue_cancel(queue, 0);
break;
}
spin_unlock_irqrestore(&video->queue.irqlock, flags);
diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile
index a11aad5..edba2d1 100644
--- a/drivers/usb/gadget/legacy/Makefile
+++ b/drivers/usb/gadget/legacy/Makefile
@@ -2,9 +2,9 @@
# USB gadget drivers
#
-ccflags-y := -I$(PWD)/drivers/usb/gadget/
-ccflags-y += -I$(PWD)/drivers/usb/gadget/udc/
-ccflags-y += -I$(PWD)/drivers/usb/gadget/function/
+ccflags-y := -Idrivers/usb/gadget/
+ccflags-y += -Idrivers/usb/gadget/udc/
+ccflags-y += -Idrivers/usb/gadget/function/
g_zero-y := zero.o
g_audio-y := audio.o
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index 986fc51..225e385 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -222,10 +222,12 @@
{
#ifdef CONFIG_USB_G_DBGP_SERIAL
kfree(dbgp.serial);
+ dbgp.serial = NULL;
#endif
if (dbgp.req) {
kfree(dbgp.req->buf);
usb_ep_free_request(gadget->ep0, dbgp.req);
+ dbgp.req = NULL;
}
gadget->ep0->driver_data = NULL;
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 2e4ce77..e96077b 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -440,7 +440,7 @@
value = -ENOMEM;
kbuf = memdup_user(buf, len);
- if (!kbuf) {
+ if (IS_ERR(kbuf)) {
value = PTR_ERR(kbuf);
goto free1;
}
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 5151f94..34ebaa6 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -332,7 +332,7 @@
gadget drivers to also be dynamically linked.
config USB_EG20T
- tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+ tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
depends on PCI
help
This is a USB device driver for EG20T PCH.
@@ -353,6 +353,7 @@
ML7213/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7831 is completely compatible for Intel EG20T PCH.
+ This driver can be used with Intel's Quark X1000 SOC platform
#
# LAST -- dummy/emulated controller
#
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 906e65f..c9fe67e 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1661,7 +1661,7 @@
if (dma_status) {
int i;
- for (i = 1; i < USBA_NR_DMAS; i++)
+ for (i = 1; i <= USBA_NR_DMAS; i++)
if (dma_status & (1 << i))
usba_dma_irq(udc, &udc->usba_ep[i]);
}
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index d40255f..5c5d1ad 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1398,13 +1398,17 @@
/* initialize udc */
fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
- if (fusb300 == NULL)
+ if (fusb300 == NULL) {
+ ret = -ENOMEM;
goto clean_up;
+ }
for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
- if (_ep[i] == NULL)
+ if (_ep[i] == NULL) {
+ ret = -ENOMEM;
goto clean_up;
+ }
fusb300->ep[i] = _ep[i];
}
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index eb8c3be..460d953 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -343,6 +343,7 @@
* @setup_data: Received setup data
* @phys_addr: of device memory
* @base_addr: for mapped device memory
+ * @bar: Indicates which PCI BAR for USB regs
* @irq: IRQ line for the device
* @cfg_data: current cfg, intf, and alt in use
* @vbus_gpio: GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@
struct usb_ctrlrequest setup_data;
unsigned long phys_addr;
void __iomem *base_addr;
+ unsigned bar;
unsigned irq;
struct pch_udc_cfg_data cfg_data;
struct pch_vbus_gpio_data vbus_gpio;
};
#define to_pch_udc(g) (container_of((g), struct pch_udc_dev, gadget))
+#define PCH_UDC_PCI_BAR_QUARK_X1000 0
#define PCH_UDC_PCI_BAR 1
#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC 0x0939
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D
#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808
@@ -3076,7 +3080,7 @@
iounmap(dev->base_addr);
if (dev->mem_region)
release_mem_region(dev->phys_addr,
- pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+ pci_resource_len(pdev, dev->bar));
if (dev->active)
pci_disable_device(pdev);
kfree(dev);
@@ -3144,9 +3148,15 @@
dev->active = 1;
pci_set_drvdata(pdev, dev);
+ /* Determine BAR based on PCI ID */
+ if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+ dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+ else
+ dev->bar = PCH_UDC_PCI_BAR;
+
/* PCI resource allocation */
- resource = pci_resource_start(pdev, 1);
- len = pci_resource_len(pdev, 1);
+ resource = pci_resource_start(pdev, dev->bar);
+ len = pci_resource_len(pdev, dev->bar);
if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3212,6 +3222,12 @@
static const struct pci_device_id pch_udc_pcidev_id[] = {
{
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+ .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class_mask = 0xffffffff,
+ },
+ {
PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
.class_mask = 0xffffffff,
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 4600842..de2a871 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1868,8 +1868,8 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(&pdev->dev, res);
- if (!reg)
- return -ENODEV;
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
irq = ires->start;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index cc305c7..6130b75 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1230,7 +1230,7 @@
if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
spin_unlock_irqrestore(&ehci->lock, flags);
retval = ehset_single_step_set_feature(hcd,
- wIndex);
+ wIndex + 1);
spin_lock_irqsave(&ehci->lock, flags);
break;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 687d366..c22a3e1 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -101,6 +101,10 @@
/* AMD PLL quirk */
if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+ if (pdev->vendor == PCI_VENDOR_ID_AMD)
+ xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_INTEL_HOST;
@@ -151,6 +155,11 @@
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
+ /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+ if (pdev->vendor == PCI_VENDOR_ID_VIA &&
+ pdev->device == 0x3432)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 60fb52a..abed30b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -364,32 +364,6 @@
}
}
-/*
- * Find the segment that trb is in. Start searching in start_seg.
- * If we must move past a segment that has a link TRB with a toggle cycle state
- * bit set, then we will toggle the value pointed at by cycle_state.
- */
-static struct xhci_segment *find_trb_seg(
- struct xhci_segment *start_seg,
- union xhci_trb *trb, int *cycle_state)
-{
- struct xhci_segment *cur_seg = start_seg;
- struct xhci_generic_trb *generic_trb;
-
- while (cur_seg->trbs > trb ||
- &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
- generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
- if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE))
- *cycle_state ^= 0x1;
- cur_seg = cur_seg->next;
- if (cur_seg == start_seg)
- /* Looped over the entire list. Oops! */
- return NULL;
- }
- return cur_seg;
-}
-
-
static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id)
@@ -459,9 +433,12 @@
struct xhci_virt_device *dev = xhci->devs[slot_id];
struct xhci_virt_ep *ep = &dev->eps[ep_index];
struct xhci_ring *ep_ring;
- struct xhci_generic_trb *trb;
+ struct xhci_segment *new_seg;
+ union xhci_trb *new_deq;
dma_addr_t addr;
u64 hw_dequeue;
+ bool cycle_found = false;
+ bool td_last_trb_found = false;
ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
ep_index, stream_id);
@@ -486,45 +463,45 @@
hw_dequeue = le64_to_cpu(ep_ctx->deq);
}
- /* Find virtual address and segment of hardware dequeue pointer */
- state->new_deq_seg = ep_ring->deq_seg;
- state->new_deq_ptr = ep_ring->dequeue;
- while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
- != (dma_addr_t)(hw_dequeue & ~0xf)) {
- next_trb(xhci, ep_ring, &state->new_deq_seg,
- &state->new_deq_ptr);
- if (state->new_deq_ptr == ep_ring->dequeue) {
- WARN_ON(1);
+ new_seg = ep_ring->deq_seg;
+ new_deq = ep_ring->dequeue;
+ state->new_cycle_state = hw_dequeue & 0x1;
+
+ /*
+ * We want to find the pointer, segment and cycle state of the new trb
+ * (the one after current TD's last_trb). We know the cycle state at
+ * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
+ * found.
+ */
+ do {
+ if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
+ == (dma_addr_t)(hw_dequeue & ~0xf)) {
+ cycle_found = true;
+ if (td_last_trb_found)
+ break;
+ }
+ if (new_deq == cur_td->last_trb)
+ td_last_trb_found = true;
+
+ if (cycle_found &&
+ TRB_TYPE_LINK_LE32(new_deq->generic.field[3]) &&
+ new_deq->generic.field[3] & cpu_to_le32(LINK_TOGGLE))
+ state->new_cycle_state ^= 0x1;
+
+ next_trb(xhci, ep_ring, &new_seg, &new_deq);
+
+ /* Search wrapped around, bail out */
+ if (new_deq == ep->ring->dequeue) {
+ xhci_err(xhci, "Error: Failed finding new dequeue state\n");
+ state->new_deq_seg = NULL;
+ state->new_deq_ptr = NULL;
return;
}
- }
- /*
- * Find cycle state for last_trb, starting at old cycle state of
- * hw_dequeue. If there is only one segment ring, find_trb_seg() will
- * return immediately and cannot toggle the cycle state if this search
- * wraps around, so add one more toggle manually in that case.
- */
- state->new_cycle_state = hw_dequeue & 0x1;
- if (ep_ring->first_seg == ep_ring->first_seg->next &&
- cur_td->last_trb < state->new_deq_ptr)
- state->new_cycle_state ^= 0x1;
- state->new_deq_ptr = cur_td->last_trb;
- xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
- "Finding segment containing last TRB in TD.");
- state->new_deq_seg = find_trb_seg(state->new_deq_seg,
- state->new_deq_ptr, &state->new_cycle_state);
- if (!state->new_deq_seg) {
- WARN_ON(1);
- return;
- }
+ } while (!cycle_found || !td_last_trb_found);
- /* Increment to find next TRB after last_trb. Cycle if appropriate. */
- trb = &state->new_deq_ptr->generic;
- if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
- (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
- state->new_cycle_state ^= 0x1;
- next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+ state->new_deq_seg = new_seg;
+ state->new_deq_ptr = new_deq;
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
@@ -2487,7 +2464,8 @@
* last TRB of the previous TD. The command completion handle
* will take care the rest.
*/
- if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+ if (!event_seg && (trb_comp_code == COMP_STOP ||
+ trb_comp_code == COMP_STOP_INVAL)) {
ret = 0;
goto cleanup;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b6f2117..c020b09 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2880,6 +2880,9 @@
ep_index, ep->stopped_stream, ep->stopped_td,
&deq_state);
+ if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
+ return;
+
/* HW with the reset endpoint quirk will use the saved dequeue state to
* issue a configure endpoint command later.
*/
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 06b5d77..633caf6 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3250,6 +3250,7 @@
{ USB_DEVICE(0x0711, 0x0918) },
{ USB_DEVICE(0x0711, 0x0920) },
{ USB_DEVICE(0x0711, 0x0950) },
+ { USB_DEVICE(0x0711, 0x5200) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 9aad00f..221faed 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -96,7 +96,7 @@
struct musb *musb = ux500_channel->controller->private_data;
dev_dbg(musb->controller,
- "packet_sz=%d, mode=%d, dma_addr=0x%llu, len=%d is_tx=%d\n",
+ "packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n",
packet_sz, mode, (unsigned long long) dma_addr,
len, ux500_channel->is_tx);
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index ea9e705..f4b14bd 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -260,10 +260,8 @@
gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
GFP_KERNEL);
- if (!gpio_vbus->phy.otg) {
- kfree(gpio_vbus);
+ if (!gpio_vbus->phy.otg)
return -ENOMEM;
- }
platform_set_drvdata(pdev, gpio_vbus);
gpio_vbus->dev = &pdev->dev;
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index e4108ee..afc0908 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1601,8 +1601,8 @@
*/
if (motg->phy_number) {
phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
- if (IS_ERR(phy_select))
- return PTR_ERR(phy_select);
+ if (!phy_select)
+ return -ENOMEM;
/* Enable second PHY with the OTG port */
writel(0x1, phy_select);
}
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 68771bf..80eedd4 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -216,7 +216,7 @@
#define EXYNOS5_DRD_PHYPARAM1 (0x20)
-#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x3f << 0)
#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
#define EXYNOS5_DRD_PHYTERM (0x24)
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 6d0f608..045cd30 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -232,6 +232,9 @@
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
dev_dbg(dev, "unable to find transceiver\n");
+ if (!IS_ERR(phy))
+ phy = ERR_PTR(-ENODEV);
+
goto err0;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216ce30..824ea5e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -146,6 +146,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
@@ -934,6 +935,8 @@
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
+ /* ekey Devices */
+ { USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
/* Infineon Devices */
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
{ } /* Terminating entry */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1e58d90..70b0b1d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -42,6 +42,8 @@
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+#define FTDI_BM_ATOM_NANO_PID 0xa559 /* Basic Micro ATOM Nano USB2Serial */
+
/*
* Texas Instruments XDS100v2 JTAG / BeagleBone A3
* http://processors.wiki.ti.com/index.php/XDS100
@@ -1378,3 +1380,8 @@
#define BRAINBOXES_US_160_6_PID 0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */
#define BRAINBOXES_US_160_7_PID 0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */
#define BRAINBOXES_US_160_8_PID 0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
+
+/*
+ * ekey biometric systems GmbH (http://ekey.net/)
+ */
+#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a968894..54a8120 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -275,8 +275,12 @@
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
-#define ZTE_PRODUCT_MC2718 0xffe8
#define ZTE_PRODUCT_AC2726 0xfff1
+#define ZTE_PRODUCT_CDMA_TECH 0xfffe
+#define ZTE_PRODUCT_AC8710T 0xffff
+#define ZTE_PRODUCT_MC2718 0xffe8
+#define ZTE_PRODUCT_AD3812 0xffeb
+#define ZTE_PRODUCT_MC2716 0xffed
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -494,6 +498,10 @@
#define INOVIA_VENDOR_ID 0x20a6
#define INOVIA_SEW858 0x1105
+/* VIA Telecom */
+#define VIATELECOM_VENDOR_ID 0x15eb
+#define VIATELECOM_PRODUCT_CDS7 0x0001
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -527,10 +535,18 @@
.reserved = BIT(4),
};
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+ .sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
static const struct option_blacklist_info zte_mc2718_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
};
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+ .sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -1070,6 +1086,7 @@
{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
@@ -1544,13 +1561,18 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
- /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
@@ -1724,6 +1746,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
+ { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1916,6 +1939,8 @@
dev_dbg(dev, "%s: type %x req %x\n", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
}
+ } else if (status == -ENOENT || status == -ESHUTDOWN) {
+ dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status);
} else
dev_err(dev, "%s: error %d\n", __func__, status);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b3d5a35..e9bad92 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -45,6 +45,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 42bc082..71fd9da 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -22,6 +22,7 @@
#define PL2303_PRODUCT_ID_GPRS 0x0609
#define PL2303_PRODUCT_ID_HCR331 0x331a
#define PL2303_PRODUCT_ID_MOTOROLA 0x0307
+#define PL2303_PRODUCT_ID_ZTEK 0xe1f1
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 02de311..475723c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -764,29 +764,39 @@
if (usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
+ if (num_bulk_in < MAX_NUM_PORTS) {
+ bulk_in_endpoint[num_bulk_in] = endpoint;
+ ++num_bulk_in;
+ }
}
if (usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
+ if (num_bulk_out < MAX_NUM_PORTS) {
+ bulk_out_endpoint[num_bulk_out] = endpoint;
+ ++num_bulk_out;
+ }
}
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
+ if (num_interrupt_in < MAX_NUM_PORTS) {
+ interrupt_in_endpoint[num_interrupt_in] =
+ endpoint;
+ ++num_interrupt_in;
+ }
}
if (usb_endpoint_is_int_out(endpoint)) {
/* we found an interrupt out endpoint */
dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
- interrupt_out_endpoint[num_interrupt_out] = endpoint;
- ++num_interrupt_out;
+ if (num_interrupt_out < MAX_NUM_PORTS) {
+ interrupt_out_endpoint[num_interrupt_out] =
+ endpoint;
+ ++num_interrupt_out;
+ }
}
}
@@ -809,8 +819,10 @@
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
+ if (num_interrupt_in < MAX_NUM_PORTS) {
+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
+ ++num_interrupt_in;
+ }
}
}
}
@@ -850,6 +862,11 @@
num_ports = type->num_ports;
}
+ if (num_ports > MAX_NUM_PORTS) {
+ dev_warn(ddev, "too many ports requested: %d\n", num_ports);
+ num_ports = MAX_NUM_PORTS;
+ }
+
serial->num_ports = num_ports;
serial->num_bulk_in = num_bulk_in;
serial->num_bulk_out = num_bulk_out;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index e62f2df..6c3734d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -514,6 +514,10 @@
dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
return;
}
+ if (!urb->actual_length) {
+ dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
+ return;
+ }
if (status) {
dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
if (status != -ENOENT)
@@ -534,7 +538,8 @@
/* These are unsolicited reports from the firmware, hence no
waiting command to wakeup */
dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
- } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
+ } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
+ (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
memcpy(command_info->result_buffer, &data[1],
urb->actual_length - 1);
command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index e40ab73..1a132e9 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -272,28 +272,8 @@
}
static const struct usb_device_id id_table[] = {
- /* AC8710, AC8710T */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
- /* AC8700 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
/* MG880 */
{ USB_DEVICE(0x19d2, 0xfffd) },
- { USB_DEVICE(0x19d2, 0xfffc) },
- { USB_DEVICE(0x19d2, 0xfffb) },
- /* AC8710_V3 */
- { USB_DEVICE(0x19d2, 0xfff6) },
- { USB_DEVICE(0x19d2, 0xfff7) },
- { USB_DEVICE(0x19d2, 0xfff8) },
- { USB_DEVICE(0x19d2, 0xfff9) },
- { USB_DEVICE(0x19d2, 0xffee) },
- /* AC2716, MC2716 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
- /* AD3812 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
- { USB_DEVICE(0x19d2, 0xffec) },
- { USB_DEVICE(0x05C6, 0x3197) },
- { USB_DEVICE(0x05C6, 0x6000) },
- { USB_DEVICE(0x05C6, 0x9008) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 80a5b36..7ef99b2f 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -922,6 +922,12 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+UNUSUAL_DEV( 0x06ca, 0x2003, 0x0100, 0x0100,
+ "Newer Technology",
+ "uSCSI",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
"RockChip",
diff --git a/drivers/staging/usbip/Kconfig b/drivers/usb/usbip/Kconfig
similarity index 100%
rename from drivers/staging/usbip/Kconfig
rename to drivers/usb/usbip/Kconfig
diff --git a/drivers/staging/usbip/Makefile b/drivers/usb/usbip/Makefile
similarity index 100%
rename from drivers/staging/usbip/Makefile
rename to drivers/usb/usbip/Makefile
diff --git a/drivers/staging/usbip/README b/drivers/usb/usbip/README
similarity index 100%
rename from drivers/staging/usbip/README
rename to drivers/usb/usbip/README
diff --git a/drivers/staging/usbip/stub.h b/drivers/usb/usbip/stub.h
similarity index 100%
rename from drivers/staging/usbip/stub.h
rename to drivers/usb/usbip/stub.h
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
similarity index 90%
rename from drivers/staging/usbip/stub_dev.c
rename to drivers/usb/usbip/stub_dev.c
index 51d0c71..fac20e0 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -26,33 +26,6 @@
#include "stub.h"
/*
- * Define device IDs here if you want to explicitly limit exportable devices.
- * In most cases, wildcard matching will be okay because driver binding can be
- * changed dynamically by a userland program.
- */
-static struct usb_device_id stub_table[] = {
-#if 0
- /* just an example */
- { USB_DEVICE(0x05ac, 0x0301) }, /* Mac 1 button mouse */
- { USB_DEVICE(0x0430, 0x0009) }, /* Plat Home Keyboard */
- { USB_DEVICE(0x059b, 0x0001) }, /* Iomega USB Zip 100 */
- { USB_DEVICE(0x04b3, 0x4427) }, /* IBM USB CD-ROM */
- { USB_DEVICE(0x05a9, 0xa511) }, /* LifeView USB cam */
- { USB_DEVICE(0x55aa, 0x0201) }, /* Imation card reader */
- { USB_DEVICE(0x046d, 0x0870) }, /* Qcam Express(QV-30) */
- { USB_DEVICE(0x04bb, 0x0101) }, /* IO-DATA HD 120GB */
- { USB_DEVICE(0x04bb, 0x0904) }, /* IO-DATA USB-ET/TX */
- { USB_DEVICE(0x04bb, 0x0201) }, /* IO-DATA USB-ET/TX */
- { USB_DEVICE(0x08bb, 0x2702) }, /* ONKYO USB Speaker */
- { USB_DEVICE(0x046d, 0x08b2) }, /* Logicool Qcam 4000 Pro */
-#endif
- /* magic for wild card */
- { .driver_info = 1 },
- { 0, } /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, stub_table);
-
-/*
* usbip_status shows the status of usbip-host as long as this driver is bound
* to the target device.
*/
diff --git a/drivers/staging/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c
similarity index 100%
rename from drivers/staging/usbip/stub_main.c
rename to drivers/usb/usbip/stub_main.c
diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
similarity index 100%
rename from drivers/staging/usbip/stub_rx.c
rename to drivers/usb/usbip/stub_rx.c
diff --git a/drivers/staging/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c
similarity index 100%
rename from drivers/staging/usbip/stub_tx.c
rename to drivers/usb/usbip/stub_tx.c
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
similarity index 100%
rename from drivers/staging/usbip/usbip_common.c
rename to drivers/usb/usbip/usbip_common.c
diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h
similarity index 99%
rename from drivers/staging/usbip/usbip_common.h
rename to drivers/usb/usbip/usbip_common.h
index 4da3866..86b0847 100644
--- a/drivers/staging/usbip/usbip_common.h
+++ b/drivers/usb/usbip/usbip_common.h
@@ -29,7 +29,7 @@
#include <linux/types.h>
#include <linux/usb.h>
#include <linux/wait.h>
-#include "uapi/usbip.h"
+#include <uapi/linux/usbip.h>
#define USBIP_VERSION "1.0.0"
diff --git a/drivers/staging/usbip/usbip_event.c b/drivers/usb/usbip/usbip_event.c
similarity index 100%
rename from drivers/staging/usbip/usbip_event.c
rename to drivers/usb/usbip/usbip_event.c
diff --git a/drivers/staging/usbip/usbip_protocol.txt b/drivers/usb/usbip/usbip_protocol.txt
similarity index 100%
rename from drivers/staging/usbip/usbip_protocol.txt
rename to drivers/usb/usbip/usbip_protocol.txt
diff --git a/drivers/staging/usbip/vhci.h b/drivers/usb/usbip/vhci.h
similarity index 100%
rename from drivers/staging/usbip/vhci.h
rename to drivers/usb/usbip/vhci.h
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
similarity index 100%
rename from drivers/staging/usbip/vhci_hcd.c
rename to drivers/usb/usbip/vhci_hcd.c
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
similarity index 100%
rename from drivers/staging/usbip/vhci_rx.c
rename to drivers/usb/usbip/vhci_rx.c
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
similarity index 100%
rename from drivers/staging/usbip/vhci_sysfs.c
rename to drivers/usb/usbip/vhci_sysfs.c
diff --git a/drivers/staging/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c
similarity index 100%
rename from drivers/staging/usbip/vhci_tx.c
rename to drivers/usb/usbip/vhci_tx.c
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 3e2e4ed..e279015 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -2602,6 +2602,7 @@
dev = &wa->usb_iface->dev;
--(wa->active_buf_in_urbs);
active_buf_in_urbs = wa->active_buf_in_urbs;
+ rpipe = xfer->ep->hcpriv;
if (usb_pipeisoc(xfer->urb->pipe)) {
struct usb_iso_packet_descriptor *iso_frame_desc =
@@ -2659,7 +2660,6 @@
resubmit_dti = (isoc_data_frame_count ==
urb_frame_count);
} else if (active_buf_in_urbs == 0) {
- rpipe = xfer->ep->hcpriv;
dev_dbg(dev,
"xfer %p 0x%08X#%u: data in done (%zu bytes)\n",
xfer, wa_xfer_id(xfer), seg->index,
@@ -2685,7 +2685,6 @@
*/
resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING;
spin_lock_irqsave(&xfer->lock, flags);
- rpipe = xfer->ep->hcpriv;
if (printk_ratelimit())
dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n",
xfer, wa_xfer_id(xfer), seg->index,
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index d7a3d13..b85983e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -173,6 +173,7 @@
data->max_brightness--;
}
+ data->enable_gpio = -EINVAL;
return 0;
}
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index beadd3e..a7b6217 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -24,6 +24,7 @@
#include <linux/list.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/hardirq.h>
#include <linux/dma-mapping.h>
@@ -650,6 +651,7 @@
{
struct device_node *endpoint;
int err;
+ unsigned int bpp;
u32 max_bandwidth;
u32 tft_r0b0g0[3];
@@ -667,11 +669,22 @@
err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
&max_bandwidth);
- if (!err)
- fb->panel->bpp = 8 * max_bandwidth / (fb->panel->mode.xres *
- fb->panel->mode.yres * fb->panel->mode.refresh);
- else
- fb->panel->bpp = 32;
+ if (!err) {
+ /*
+ * max_bandwidth is in bytes per second and pixclock in
+ * pico-seconds, so the maximum allowed bits per pixel is
+ * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
+ * Rearrange this calculation to avoid overflow and then ensure
+ * result is a valid format.
+ */
+ bpp = max_bandwidth / (1000 / 8)
+ / PICOS2KHZ(fb->panel->mode.pixclock);
+ bpp = rounddown_pow_of_two(bpp);
+ if (bpp > 32)
+ bpp = 32;
+ } else
+ bpp = 32;
+ fb->panel->bpp = bpp;
#ifdef CONFIG_CPU_BIG_ENDIAN
fb->panel->cntl |= CNTL_BEBO;
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index 92640d4..1d8bdb9 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1102,12 +1102,14 @@
timings = of_get_display_timings(display_np);
if (!timings) {
dev_err(dev, "failed to get display timings\n");
+ ret = -EINVAL;
goto put_display_node;
}
timings_np = of_find_node_by_name(display_np, "display-timings");
if (!timings_np) {
dev_err(dev, "failed to find display-timings node\n");
+ ret = -ENODEV;
goto put_display_node;
}
diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 206a66b..59abdc6 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -273,7 +273,7 @@
{ 0xa8, 0x00 }
};
-static void __init chips_hw_init(void)
+static void chips_hw_init(void)
{
int i;
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index 788f6b3..10c876c 100644
--- a/drivers/video/fbdev/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -419,7 +419,7 @@
{
u32 reg;
- reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf;
+ reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff;
reg |= (((back_porch-1) & 0xff) << 24)
| (((front_porch-1) & 0xff) << 16)
| (((pulse_width-1) & 0x3f) << 10);
diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
index 987edf1..5c098d5 100644
--- a/drivers/video/of_display_timing.c
+++ b/drivers/video/of_display_timing.c
@@ -236,6 +236,7 @@
if (native_mode)
of_node_put(native_mode);
display_timings_release(disp);
+ disp = NULL;
entryfail:
kfree(disp);
dispfail:
diff --git a/fs/aio.c b/fs/aio.c
index ae63587..97bc62c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -141,6 +141,7 @@
struct {
unsigned tail;
+ unsigned completed_events;
spinlock_t completion_lock;
} ____cacheline_aligned_in_smp;
@@ -857,6 +858,68 @@
return ret;
}
+/* refill_reqs_available
+ * Updates the reqs_available reference counts used for tracking the
+ * number of free slots in the completion ring. This can be called
+ * from aio_complete() (to optimistically update reqs_available) or
+ * from aio_get_req() (the we're out of events case). It must be
+ * called holding ctx->completion_lock.
+ */
+static void refill_reqs_available(struct kioctx *ctx, unsigned head,
+ unsigned tail)
+{
+ unsigned events_in_ring, completed;
+
+ /* Clamp head since userland can write to it. */
+ head %= ctx->nr_events;
+ if (head <= tail)
+ events_in_ring = tail - head;
+ else
+ events_in_ring = ctx->nr_events - (head - tail);
+
+ completed = ctx->completed_events;
+ if (events_in_ring < completed)
+ completed -= events_in_ring;
+ else
+ completed = 0;
+
+ if (!completed)
+ return;
+
+ ctx->completed_events -= completed;
+ put_reqs_available(ctx, completed);
+}
+
+/* user_refill_reqs_available
+ * Called to refill reqs_available when aio_get_req() encounters an
+ * out of space in the completion ring.
+ */
+static void user_refill_reqs_available(struct kioctx *ctx)
+{
+ spin_lock_irq(&ctx->completion_lock);
+ if (ctx->completed_events) {
+ struct aio_ring *ring;
+ unsigned head;
+
+ /* Access of ring->head may race with aio_read_events_ring()
+ * here, but that's okay since whether we read the old version
+ * or the new version, and either will be valid. The important
+ * part is that head cannot pass tail since we prevent
+ * aio_complete() from updating tail by holding
+ * ctx->completion_lock. Even if head is invalid, the check
+ * against ctx->completed_events below will make sure we do the
+ * safe/right thing.
+ */
+ ring = kmap_atomic(ctx->ring_pages[0]);
+ head = ring->head;
+ kunmap_atomic(ring);
+
+ refill_reqs_available(ctx, head, ctx->tail);
+ }
+
+ spin_unlock_irq(&ctx->completion_lock);
+}
+
/* aio_get_req
* Allocate a slot for an aio request.
* Returns NULL if no requests are free.
@@ -865,8 +928,11 @@
{
struct kiocb *req;
- if (!get_reqs_available(ctx))
- return NULL;
+ if (!get_reqs_available(ctx)) {
+ user_refill_reqs_available(ctx);
+ if (!get_reqs_available(ctx))
+ return NULL;
+ }
req = kmem_cache_alloc(kiocb_cachep, GFP_KERNEL|__GFP_ZERO);
if (unlikely(!req))
@@ -925,8 +991,8 @@
struct kioctx *ctx = iocb->ki_ctx;
struct aio_ring *ring;
struct io_event *ev_page, *event;
+ unsigned tail, pos, head;
unsigned long flags;
- unsigned tail, pos;
/*
* Special case handling for sync iocbs:
@@ -987,10 +1053,14 @@
ctx->tail = tail;
ring = kmap_atomic(ctx->ring_pages[0]);
+ head = ring->head;
ring->tail = tail;
kunmap_atomic(ring);
flush_dcache_page(ctx->ring_pages[0]);
+ ctx->completed_events++;
+ if (ctx->completed_events > 1)
+ refill_reqs_available(ctx, head, tail);
spin_unlock_irqrestore(&ctx->completion_lock, flags);
pr_debug("added to ring %p at [%u]\n", iocb, tail);
@@ -1005,7 +1075,6 @@
/* everything turned out well, dispose of the aiocb. */
kiocb_free(iocb);
- put_reqs_available(ctx, 1);
/*
* We have to order our ring_info tail store above and test
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 5a201d8..fbd76de 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -22,7 +22,6 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/freezer.h>
-#include <linux/workqueue.h>
#include "async-thread.h"
#include "ctree.h"
@@ -55,8 +54,39 @@
struct __btrfs_workqueue *high;
};
-static inline struct __btrfs_workqueue
-*__btrfs_alloc_workqueue(const char *name, int flags, int max_active,
+static void normal_work_helper(struct btrfs_work *work);
+
+#define BTRFS_WORK_HELPER(name) \
+void btrfs_##name(struct work_struct *arg) \
+{ \
+ struct btrfs_work *work = container_of(arg, struct btrfs_work, \
+ normal_work); \
+ normal_work_helper(work); \
+}
+
+BTRFS_WORK_HELPER(worker_helper);
+BTRFS_WORK_HELPER(delalloc_helper);
+BTRFS_WORK_HELPER(flush_delalloc_helper);
+BTRFS_WORK_HELPER(cache_helper);
+BTRFS_WORK_HELPER(submit_helper);
+BTRFS_WORK_HELPER(fixup_helper);
+BTRFS_WORK_HELPER(endio_helper);
+BTRFS_WORK_HELPER(endio_meta_helper);
+BTRFS_WORK_HELPER(endio_meta_write_helper);
+BTRFS_WORK_HELPER(endio_raid56_helper);
+BTRFS_WORK_HELPER(rmw_helper);
+BTRFS_WORK_HELPER(endio_write_helper);
+BTRFS_WORK_HELPER(freespace_write_helper);
+BTRFS_WORK_HELPER(delayed_meta_helper);
+BTRFS_WORK_HELPER(readahead_helper);
+BTRFS_WORK_HELPER(qgroup_rescan_helper);
+BTRFS_WORK_HELPER(extent_refs_helper);
+BTRFS_WORK_HELPER(scrub_helper);
+BTRFS_WORK_HELPER(scrubwrc_helper);
+BTRFS_WORK_HELPER(scrubnc_helper);
+
+static struct __btrfs_workqueue *
+__btrfs_alloc_workqueue(const char *name, int flags, int max_active,
int thresh)
{
struct __btrfs_workqueue *ret = kzalloc(sizeof(*ret), GFP_NOFS);
@@ -232,13 +262,11 @@
spin_unlock_irqrestore(lock, flags);
}
-static void normal_work_helper(struct work_struct *arg)
+static void normal_work_helper(struct btrfs_work *work)
{
- struct btrfs_work *work;
struct __btrfs_workqueue *wq;
int need_order = 0;
- work = container_of(arg, struct btrfs_work, normal_work);
/*
* We should not touch things inside work in the following cases:
* 1) after work->func() if it has no ordered_free
@@ -262,7 +290,7 @@
trace_btrfs_all_work_done(work);
}
-void btrfs_init_work(struct btrfs_work *work,
+void btrfs_init_work(struct btrfs_work *work, btrfs_work_func_t uniq_func,
btrfs_func_t func,
btrfs_func_t ordered_func,
btrfs_func_t ordered_free)
@@ -270,7 +298,7 @@
work->func = func;
work->ordered_func = ordered_func;
work->ordered_free = ordered_free;
- INIT_WORK(&work->normal_work, normal_work_helper);
+ INIT_WORK(&work->normal_work, uniq_func);
INIT_LIST_HEAD(&work->ordered_list);
work->flags = 0;
}
diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h
index 9c6b66d1..e9e31c9 100644
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -19,12 +19,14 @@
#ifndef __BTRFS_ASYNC_THREAD_
#define __BTRFS_ASYNC_THREAD_
+#include <linux/workqueue.h>
struct btrfs_workqueue;
/* Internal use only */
struct __btrfs_workqueue;
struct btrfs_work;
typedef void (*btrfs_func_t)(struct btrfs_work *arg);
+typedef void (*btrfs_work_func_t)(struct work_struct *arg);
struct btrfs_work {
btrfs_func_t func;
@@ -38,11 +40,35 @@
unsigned long flags;
};
+#define BTRFS_WORK_HELPER_PROTO(name) \
+void btrfs_##name(struct work_struct *arg)
+
+BTRFS_WORK_HELPER_PROTO(worker_helper);
+BTRFS_WORK_HELPER_PROTO(delalloc_helper);
+BTRFS_WORK_HELPER_PROTO(flush_delalloc_helper);
+BTRFS_WORK_HELPER_PROTO(cache_helper);
+BTRFS_WORK_HELPER_PROTO(submit_helper);
+BTRFS_WORK_HELPER_PROTO(fixup_helper);
+BTRFS_WORK_HELPER_PROTO(endio_helper);
+BTRFS_WORK_HELPER_PROTO(endio_meta_helper);
+BTRFS_WORK_HELPER_PROTO(endio_meta_write_helper);
+BTRFS_WORK_HELPER_PROTO(endio_raid56_helper);
+BTRFS_WORK_HELPER_PROTO(rmw_helper);
+BTRFS_WORK_HELPER_PROTO(endio_write_helper);
+BTRFS_WORK_HELPER_PROTO(freespace_write_helper);
+BTRFS_WORK_HELPER_PROTO(delayed_meta_helper);
+BTRFS_WORK_HELPER_PROTO(readahead_helper);
+BTRFS_WORK_HELPER_PROTO(qgroup_rescan_helper);
+BTRFS_WORK_HELPER_PROTO(extent_refs_helper);
+BTRFS_WORK_HELPER_PROTO(scrub_helper);
+BTRFS_WORK_HELPER_PROTO(scrubwrc_helper);
+BTRFS_WORK_HELPER_PROTO(scrubnc_helper);
+
struct btrfs_workqueue *btrfs_alloc_workqueue(const char *name,
int flags,
int max_active,
int thresh);
-void btrfs_init_work(struct btrfs_work *work,
+void btrfs_init_work(struct btrfs_work *work, btrfs_work_func_t helper,
btrfs_func_t func,
btrfs_func_t ordered_func,
btrfs_func_t ordered_free);
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index da775bf..a2e90f8 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1395,8 +1395,8 @@
return -ENOMEM;
async_work->delayed_root = delayed_root;
- btrfs_init_work(&async_work->work, btrfs_async_run_delayed_root,
- NULL, NULL);
+ btrfs_init_work(&async_work->work, btrfs_delayed_meta_helper,
+ btrfs_async_run_delayed_root, NULL, NULL);
async_work->nr = nr;
btrfs_queue_work(root->fs_info->delayed_workers, &async_work->work);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index d0ed9e6..a1d36e6 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -39,7 +39,6 @@
#include "btrfs_inode.h"
#include "volumes.h"
#include "print-tree.h"
-#include "async-thread.h"
#include "locking.h"
#include "tree-log.h"
#include "free-space-cache.h"
@@ -693,35 +692,41 @@
{
struct end_io_wq *end_io_wq = bio->bi_private;
struct btrfs_fs_info *fs_info;
+ struct btrfs_workqueue *wq;
+ btrfs_work_func_t func;
fs_info = end_io_wq->info;
end_io_wq->error = err;
- btrfs_init_work(&end_io_wq->work, end_workqueue_fn, NULL, NULL);
if (bio->bi_rw & REQ_WRITE) {
- if (end_io_wq->metadata == BTRFS_WQ_ENDIO_METADATA)
- btrfs_queue_work(fs_info->endio_meta_write_workers,
- &end_io_wq->work);
- else if (end_io_wq->metadata == BTRFS_WQ_ENDIO_FREE_SPACE)
- btrfs_queue_work(fs_info->endio_freespace_worker,
- &end_io_wq->work);
- else if (end_io_wq->metadata == BTRFS_WQ_ENDIO_RAID56)
- btrfs_queue_work(fs_info->endio_raid56_workers,
- &end_io_wq->work);
- else
- btrfs_queue_work(fs_info->endio_write_workers,
- &end_io_wq->work);
+ if (end_io_wq->metadata == BTRFS_WQ_ENDIO_METADATA) {
+ wq = fs_info->endio_meta_write_workers;
+ func = btrfs_endio_meta_write_helper;
+ } else if (end_io_wq->metadata == BTRFS_WQ_ENDIO_FREE_SPACE) {
+ wq = fs_info->endio_freespace_worker;
+ func = btrfs_freespace_write_helper;
+ } else if (end_io_wq->metadata == BTRFS_WQ_ENDIO_RAID56) {
+ wq = fs_info->endio_raid56_workers;
+ func = btrfs_endio_raid56_helper;
+ } else {
+ wq = fs_info->endio_write_workers;
+ func = btrfs_endio_write_helper;
+ }
} else {
- if (end_io_wq->metadata == BTRFS_WQ_ENDIO_RAID56)
- btrfs_queue_work(fs_info->endio_raid56_workers,
- &end_io_wq->work);
- else if (end_io_wq->metadata)
- btrfs_queue_work(fs_info->endio_meta_workers,
- &end_io_wq->work);
- else
- btrfs_queue_work(fs_info->endio_workers,
- &end_io_wq->work);
+ if (end_io_wq->metadata == BTRFS_WQ_ENDIO_RAID56) {
+ wq = fs_info->endio_raid56_workers;
+ func = btrfs_endio_raid56_helper;
+ } else if (end_io_wq->metadata) {
+ wq = fs_info->endio_meta_workers;
+ func = btrfs_endio_meta_helper;
+ } else {
+ wq = fs_info->endio_workers;
+ func = btrfs_endio_helper;
+ }
}
+
+ btrfs_init_work(&end_io_wq->work, func, end_workqueue_fn, NULL, NULL);
+ btrfs_queue_work(wq, &end_io_wq->work);
}
/*
@@ -828,7 +833,7 @@
async->submit_bio_start = submit_bio_start;
async->submit_bio_done = submit_bio_done;
- btrfs_init_work(&async->work, run_one_async_start,
+ btrfs_init_work(&async->work, btrfs_worker_helper, run_one_async_start,
run_one_async_done, run_one_async_free);
async->bio_flags = bio_flags;
@@ -3450,7 +3455,8 @@
btrfs_set_stack_device_generation(dev_item, 0);
btrfs_set_stack_device_type(dev_item, dev->type);
btrfs_set_stack_device_id(dev_item, dev->devid);
- btrfs_set_stack_device_total_bytes(dev_item, dev->total_bytes);
+ btrfs_set_stack_device_total_bytes(dev_item,
+ dev->disk_total_bytes);
btrfs_set_stack_device_bytes_used(dev_item, dev->bytes_used);
btrfs_set_stack_device_io_align(dev_item, dev->io_align);
btrfs_set_stack_device_io_width(dev_item, dev->io_width);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 102ed31..3efe1c3 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -552,7 +552,8 @@
caching_ctl->block_group = cache;
caching_ctl->progress = cache->key.objectid;
atomic_set(&caching_ctl->count, 1);
- btrfs_init_work(&caching_ctl->work, caching_thread, NULL, NULL);
+ btrfs_init_work(&caching_ctl->work, btrfs_cache_helper,
+ caching_thread, NULL, NULL);
spin_lock(&cache->lock);
/*
@@ -2749,8 +2750,8 @@
async->sync = 0;
init_completion(&async->wait);
- btrfs_init_work(&async->work, delayed_ref_async_start,
- NULL, NULL);
+ btrfs_init_work(&async->work, btrfs_extent_refs_helper,
+ delayed_ref_async_start, NULL, NULL);
btrfs_queue_work(root->fs_info->extent_workers, &async->work);
@@ -3586,13 +3587,7 @@
*/
static u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags)
{
- /*
- * we add in the count of missing devices because we want
- * to make sure that any RAID levels on a degraded FS
- * continue to be honored.
- */
- u64 num_devices = root->fs_info->fs_devices->rw_devices +
- root->fs_info->fs_devices->missing_devices;
+ u64 num_devices = root->fs_info->fs_devices->rw_devices;
u64 target;
u64 tmp;
@@ -8440,13 +8435,7 @@
if (stripped)
return extended_to_chunk(stripped);
- /*
- * we add in the count of missing devices because we want
- * to make sure that any RAID levels on a degraded FS
- * continue to be honored.
- */
- num_devices = root->fs_info->fs_devices->rw_devices +
- root->fs_info->fs_devices->missing_devices;
+ num_devices = root->fs_info->fs_devices->rw_devices;
stripped = BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID5 | BTRFS_BLOCK_GROUP_RAID6 |
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 3e11aab..af0359d 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2532,6 +2532,7 @@
test_bit(BIO_UPTODATE, &bio->bi_flags);
if (err)
uptodate = 0;
+ offset += len;
continue;
}
}
@@ -4207,8 +4208,8 @@
return -ENOMEM;
path->leave_spinning = 1;
- start = ALIGN(start, BTRFS_I(inode)->root->sectorsize);
- len = ALIGN(len, BTRFS_I(inode)->root->sectorsize);
+ start = round_down(start, BTRFS_I(inode)->root->sectorsize);
+ len = round_up(max, BTRFS_I(inode)->root->sectorsize) - start;
/*
* lookup the last file extent. We're not using i_size here
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index d3afac2..36861b7 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1840,7 +1840,15 @@
{
if (filp->private_data)
btrfs_ioctl_trans_end(filp);
- filemap_flush(inode->i_mapping);
+ /*
+ * ordered_data_close is set by settattr when we are about to truncate
+ * a file from a non-zero size to a zero size. This tries to
+ * flush down new bytes that may have been written if the
+ * application were using truncate to replace a file in place.
+ */
+ if (test_and_clear_bit(BTRFS_INODE_ORDERED_DATA_CLOSE,
+ &BTRFS_I(inode)->runtime_flags))
+ filemap_flush(inode->i_mapping);
return 0;
}
@@ -2088,10 +2096,9 @@
goto out;
}
- if (hole_mergeable(inode, leaf, path->slots[0]+1, offset, end)) {
+ if (hole_mergeable(inode, leaf, path->slots[0], offset, end)) {
u64 num_bytes;
- path->slots[0]++;
key.offset = offset;
btrfs_set_item_key_safe(root, path, &key);
fi = btrfs_item_ptr(leaf, path->slots[0],
@@ -2216,7 +2223,7 @@
goto out_only_mutex;
}
- lockstart = round_up(offset , BTRFS_I(inode)->root->sectorsize);
+ lockstart = round_up(offset, BTRFS_I(inode)->root->sectorsize);
lockend = round_down(offset + len,
BTRFS_I(inode)->root->sectorsize) - 1;
same_page = ((offset >> PAGE_CACHE_SHIFT) ==
@@ -2277,7 +2284,7 @@
tail_start + tail_len, 0, 1);
if (ret)
goto out_only_mutex;
- }
+ }
}
}
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 03708ef..9c194bd 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1096,8 +1096,10 @@
async_cow->end = cur_end;
INIT_LIST_HEAD(&async_cow->extents);
- btrfs_init_work(&async_cow->work, async_cow_start,
- async_cow_submit, async_cow_free);
+ btrfs_init_work(&async_cow->work,
+ btrfs_delalloc_helper,
+ async_cow_start, async_cow_submit,
+ async_cow_free);
nr_pages = (cur_end - start + PAGE_CACHE_SIZE) >>
PAGE_CACHE_SHIFT;
@@ -1881,7 +1883,8 @@
SetPageChecked(page);
page_cache_get(page);
- btrfs_init_work(&fixup->work, btrfs_writepage_fixup_worker, NULL, NULL);
+ btrfs_init_work(&fixup->work, btrfs_fixup_helper,
+ btrfs_writepage_fixup_worker, NULL, NULL);
fixup->page = page;
btrfs_queue_work(root->fs_info->fixup_workers, &fixup->work);
return -EBUSY;
@@ -2822,7 +2825,8 @@
struct inode *inode = page->mapping->host;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_ordered_extent *ordered_extent = NULL;
- struct btrfs_workqueue *workers;
+ struct btrfs_workqueue *wq;
+ btrfs_work_func_t func;
trace_btrfs_writepage_end_io_hook(page, start, end, uptodate);
@@ -2831,13 +2835,17 @@
end - start + 1, uptodate))
return 0;
- btrfs_init_work(&ordered_extent->work, finish_ordered_fn, NULL, NULL);
+ if (btrfs_is_free_space_inode(inode)) {
+ wq = root->fs_info->endio_freespace_worker;
+ func = btrfs_freespace_write_helper;
+ } else {
+ wq = root->fs_info->endio_write_workers;
+ func = btrfs_endio_write_helper;
+ }
- if (btrfs_is_free_space_inode(inode))
- workers = root->fs_info->endio_freespace_worker;
- else
- workers = root->fs_info->endio_write_workers;
- btrfs_queue_work(workers, &ordered_extent->work);
+ btrfs_init_work(&ordered_extent->work, func, finish_ordered_fn, NULL,
+ NULL);
+ btrfs_queue_work(wq, &ordered_extent->work);
return 0;
}
@@ -4674,6 +4682,11 @@
clear_bit(EXTENT_FLAG_LOGGING, &em->flags);
remove_extent_mapping(map_tree, em);
free_extent_map(em);
+ if (need_resched()) {
+ write_unlock(&map_tree->lock);
+ cond_resched();
+ write_lock(&map_tree->lock);
+ }
}
write_unlock(&map_tree->lock);
@@ -4696,6 +4709,7 @@
&cached_state, GFP_NOFS);
free_extent_state(state);
+ cond_resched();
spin_lock(&io_tree->lock);
}
spin_unlock(&io_tree->lock);
@@ -5181,6 +5195,42 @@
iput(inode);
inode = ERR_PTR(ret);
}
+ /*
+ * If orphan cleanup did remove any orphans, it means the tree
+ * was modified and therefore the commit root is not the same as
+ * the current root anymore. This is a problem, because send
+ * uses the commit root and therefore can see inode items that
+ * don't exist in the current root anymore, and for example make
+ * calls to btrfs_iget, which will do tree lookups based on the
+ * current root and not on the commit root. Those lookups will
+ * fail, returning a -ESTALE error, and making send fail with
+ * that error. So make sure a send does not see any orphans we
+ * have just removed, and that it will see the same inodes
+ * regardless of whether a transaction commit happened before
+ * it started (meaning that the commit root will be the same as
+ * the current root) or not.
+ */
+ if (sub_root->node != sub_root->commit_root) {
+ u64 sub_flags = btrfs_root_flags(&sub_root->root_item);
+
+ if (sub_flags & BTRFS_ROOT_SUBVOL_RDONLY) {
+ struct extent_buffer *eb;
+
+ /*
+ * Assert we can't have races between dentry
+ * lookup called through the snapshot creation
+ * ioctl and the VFS.
+ */
+ ASSERT(mutex_is_locked(&dir->i_mutex));
+
+ down_write(&root->fs_info->commit_root_sem);
+ eb = sub_root->commit_root;
+ sub_root->commit_root =
+ btrfs_root_node(sub_root);
+ up_write(&root->fs_info->commit_root_sem);
+ free_extent_buffer(eb);
+ }
+ }
}
return inode;
@@ -5606,6 +5656,13 @@
}
/*
+ * O_TMPFILE, set link count to 0, so that after this point,
+ * we fill in an inode item with the correct link count.
+ */
+ if (!name)
+ set_nlink(inode, 0);
+
+ /*
* we have to initialize this early, so we can reclaim the inode
* number if we fail afterwards in this function.
*/
@@ -6097,14 +6154,14 @@
static int merge_extent_mapping(struct extent_map_tree *em_tree,
struct extent_map *existing,
struct extent_map *em,
- u64 map_start, u64 map_len)
+ u64 map_start)
{
u64 start_diff;
BUG_ON(map_start < em->start || map_start >= extent_map_end(em));
start_diff = map_start - em->start;
em->start = map_start;
- em->len = map_len;
+ em->len = existing->start - em->start;
if (em->block_start < EXTENT_MAP_LAST_BYTE &&
!test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
em->block_start += start_diff;
@@ -6275,6 +6332,8 @@
goto not_found;
if (start + len <= found_key.offset)
goto not_found;
+ if (start > found_key.offset)
+ goto next;
em->start = start;
em->orig_start = start;
em->len = found_key.offset - start;
@@ -6390,8 +6449,7 @@
em->len);
if (existing) {
err = merge_extent_mapping(em_tree, existing,
- em, start,
- root->sectorsize);
+ em, start);
free_extent_map(existing);
if (err) {
free_extent_map(em);
@@ -7158,7 +7216,8 @@
if (!ret)
goto out_test;
- btrfs_init_work(&ordered->work, finish_ordered_fn, NULL, NULL);
+ btrfs_init_work(&ordered->work, btrfs_endio_write_helper,
+ finish_ordered_fn, NULL, NULL);
btrfs_queue_work(root->fs_info->endio_write_workers,
&ordered->work);
out_test:
@@ -7306,10 +7365,8 @@
map_length = orig_bio->bi_iter.bi_size;
ret = btrfs_map_block(root->fs_info, rw, start_sector << 9,
&map_length, NULL, 0);
- if (ret) {
- bio_put(orig_bio);
+ if (ret)
return -EIO;
- }
if (map_length >= orig_bio->bi_iter.bi_size) {
bio = orig_bio;
@@ -7326,6 +7383,7 @@
bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
if (!bio)
return -ENOMEM;
+
bio->bi_private = dip;
bio->bi_end_io = btrfs_end_dio_bio;
atomic_inc(&dip->pending_bios);
@@ -7534,7 +7592,8 @@
count = iov_iter_count(iter);
if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
&BTRFS_I(inode)->runtime_flags))
- filemap_fdatawrite_range(inode->i_mapping, offset, count);
+ filemap_fdatawrite_range(inode->i_mapping, offset,
+ offset + count - 1);
if (rw & WRITE) {
/*
@@ -8495,7 +8554,9 @@
work->inode = inode;
work->wait = wait;
work->delay_iput = delay_iput;
- btrfs_init_work(&work->work, btrfs_run_delalloc_work, NULL, NULL);
+ WARN_ON_ONCE(!inode);
+ btrfs_init_work(&work->work, btrfs_flush_delalloc_helper,
+ btrfs_run_delalloc_work, NULL, NULL);
return work;
}
@@ -8979,6 +9040,14 @@
if (ret)
goto out;
+ /*
+ * We set number of links to 0 in btrfs_new_inode(), and here we set
+ * it to 1 because d_tmpfile() will issue a warning if the count is 0,
+ * through:
+ *
+ * d_tmpfile() -> inode_dec_link_count() -> drop_nlink()
+ */
+ set_nlink(inode, 1);
d_tmpfile(dentry, inode);
mark_inode_dirty(inode);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 47aceb4..fce6fd0e 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -711,39 +711,6 @@
if (ret)
goto fail;
- ret = btrfs_orphan_cleanup(pending_snapshot->snap);
- if (ret)
- goto fail;
-
- /*
- * If orphan cleanup did remove any orphans, it means the tree was
- * modified and therefore the commit root is not the same as the
- * current root anymore. This is a problem, because send uses the
- * commit root and therefore can see inode items that don't exist
- * in the current root anymore, and for example make calls to
- * btrfs_iget, which will do tree lookups based on the current root
- * and not on the commit root. Those lookups will fail, returning a
- * -ESTALE error, and making send fail with that error. So make sure
- * a send does not see any orphans we have just removed, and that it
- * will see the same inodes regardless of whether a transaction
- * commit happened before it started (meaning that the commit root
- * will be the same as the current root) or not.
- */
- if (readonly && pending_snapshot->snap->node !=
- pending_snapshot->snap->commit_root) {
- trans = btrfs_join_transaction(pending_snapshot->snap);
- if (IS_ERR(trans) && PTR_ERR(trans) != -ENOENT) {
- ret = PTR_ERR(trans);
- goto fail;
- }
- if (!IS_ERR(trans)) {
- ret = btrfs_commit_transaction(trans,
- pending_snapshot->snap);
- if (ret)
- goto fail;
- }
- }
-
inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry);
if (IS_ERR(inode)) {
ret = PTR_ERR(inode);
@@ -3527,7 +3494,8 @@
btrfs_mark_buffer_dirty(leaf);
btrfs_release_path(path);
- last_dest_end = new_key.offset + datal;
+ last_dest_end = ALIGN(new_key.offset + datal,
+ root->sectorsize);
ret = clone_finish_inode_update(trans, inode,
last_dest_end,
destoff, olen);
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 963895c..ac734ec 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -615,6 +615,7 @@
spin_unlock(&root->ordered_extent_lock);
btrfs_init_work(&ordered->flush_work,
+ btrfs_flush_delalloc_helper,
btrfs_run_ordered_extent_work, NULL, NULL);
list_add_tail(&ordered->work_list, &works);
btrfs_queue_work(root->fs_info->flush_workers,
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index b497498..ded5c60 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1973,7 +1973,7 @@
elem.seq, &roots);
btrfs_put_tree_mod_seq(fs_info, &elem);
if (ret < 0)
- return ret;
+ goto out;
if (roots->nnodes != 1)
goto out;
@@ -2720,6 +2720,7 @@
memset(&fs_info->qgroup_rescan_work, 0,
sizeof(fs_info->qgroup_rescan_work));
btrfs_init_work(&fs_info->qgroup_rescan_work,
+ btrfs_qgroup_rescan_helper,
btrfs_qgroup_rescan_worker, NULL, NULL);
if (ret) {
diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index 4a88f07..0a6b6e4 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -1416,7 +1416,8 @@
static void async_rmw_stripe(struct btrfs_raid_bio *rbio)
{
- btrfs_init_work(&rbio->work, rmw_work, NULL, NULL);
+ btrfs_init_work(&rbio->work, btrfs_rmw_helper,
+ rmw_work, NULL, NULL);
btrfs_queue_work(rbio->fs_info->rmw_workers,
&rbio->work);
@@ -1424,7 +1425,8 @@
static void async_read_rebuild(struct btrfs_raid_bio *rbio)
{
- btrfs_init_work(&rbio->work, read_rebuild_work, NULL, NULL);
+ btrfs_init_work(&rbio->work, btrfs_rmw_helper,
+ read_rebuild_work, NULL, NULL);
btrfs_queue_work(rbio->fs_info->rmw_workers,
&rbio->work);
@@ -1665,7 +1667,8 @@
plug = container_of(cb, struct btrfs_plug_cb, cb);
if (from_schedule) {
- btrfs_init_work(&plug->work, unplug_work, NULL, NULL);
+ btrfs_init_work(&plug->work, btrfs_rmw_helper,
+ unplug_work, NULL, NULL);
btrfs_queue_work(plug->info->rmw_workers,
&plug->work);
return;
diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c
index 09230cf..20408c6 100644
--- a/fs/btrfs/reada.c
+++ b/fs/btrfs/reada.c
@@ -798,7 +798,8 @@
/* FIXME we cannot handle this properly right now */
BUG();
}
- btrfs_init_work(&rmw->work, reada_start_machine_worker, NULL, NULL);
+ btrfs_init_work(&rmw->work, btrfs_readahead_helper,
+ reada_start_machine_worker, NULL, NULL);
rmw->fs_info = fs_info;
btrfs_queue_work(fs_info->readahead_workers, &rmw->work);
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index b6d198f..f4a41f3 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -428,8 +428,8 @@
sbio->index = i;
sbio->sctx = sctx;
sbio->page_count = 0;
- btrfs_init_work(&sbio->work, scrub_bio_end_io_worker,
- NULL, NULL);
+ btrfs_init_work(&sbio->work, btrfs_scrub_helper,
+ scrub_bio_end_io_worker, NULL, NULL);
if (i != SCRUB_BIOS_PER_SCTX - 1)
sctx->bios[i]->next_free = i + 1;
@@ -999,8 +999,8 @@
fixup_nodatasum->root = fs_info->extent_root;
fixup_nodatasum->mirror_num = failed_mirror_index + 1;
scrub_pending_trans_workers_inc(sctx);
- btrfs_init_work(&fixup_nodatasum->work, scrub_fixup_nodatasum,
- NULL, NULL);
+ btrfs_init_work(&fixup_nodatasum->work, btrfs_scrub_helper,
+ scrub_fixup_nodatasum, NULL, NULL);
btrfs_queue_work(fs_info->scrub_workers,
&fixup_nodatasum->work);
goto out;
@@ -1616,7 +1616,8 @@
sbio->err = err;
sbio->bio = bio;
- btrfs_init_work(&sbio->work, scrub_wr_bio_end_io_worker, NULL, NULL);
+ btrfs_init_work(&sbio->work, btrfs_scrubwrc_helper,
+ scrub_wr_bio_end_io_worker, NULL, NULL);
btrfs_queue_work(fs_info->scrub_wr_completion_workers, &sbio->work);
}
@@ -2904,6 +2905,7 @@
struct scrub_ctx *sctx;
int ret;
struct btrfs_device *dev;
+ struct rcu_string *name;
if (btrfs_fs_closing(fs_info))
return -EINVAL;
@@ -2965,6 +2967,16 @@
return -ENODEV;
}
+ if (!is_dev_replace && !readonly && !dev->writeable) {
+ mutex_unlock(&fs_info->fs_devices->device_list_mutex);
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
+ btrfs_err(fs_info, "scrub: device %s is not writable",
+ name->str);
+ rcu_read_unlock();
+ return -EROFS;
+ }
+
mutex_lock(&fs_info->scrub_lock);
if (!dev->in_fs_metadata || dev->is_tgtdev_for_dev_replace) {
mutex_unlock(&fs_info->scrub_lock);
@@ -3203,7 +3215,8 @@
nocow_ctx->len = len;
nocow_ctx->mirror_num = mirror_num;
nocow_ctx->physical_for_dev_replace = physical_for_dev_replace;
- btrfs_init_work(&nocow_ctx->work, copy_nocow_pages_worker, NULL, NULL);
+ btrfs_init_work(&nocow_ctx->work, btrfs_scrubnc_helper,
+ copy_nocow_pages_worker, NULL, NULL);
INIT_LIST_HEAD(&nocow_ctx->inodes);
btrfs_queue_work(fs_info->scrub_nocow_workers,
&nocow_ctx->work);
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index 7869936..12e5355 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -614,7 +614,7 @@
if (!fs_info->device_dir_kobj)
return -EINVAL;
- if (one_device) {
+ if (one_device && one_device->bdev) {
disk = one_device->bdev->bd_part;
disk_kobj = &part_to_dev(disk)->kobj;
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 9e1f2cd..7e0e6e3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3298,7 +3298,7 @@
struct list_head ordered_sums;
int skip_csum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM;
bool has_extents = false;
- bool need_find_last_extent = (*last_extent == 0);
+ bool need_find_last_extent = true;
bool done = false;
INIT_LIST_HEAD(&ordered_sums);
@@ -3352,8 +3352,7 @@
*/
if (ins_keys[i].type == BTRFS_EXTENT_DATA_KEY) {
has_extents = true;
- if (need_find_last_extent &&
- first_key.objectid == (u64)-1)
+ if (first_key.objectid == (u64)-1)
first_key = ins_keys[i];
} else {
need_find_last_extent = false;
@@ -3427,6 +3426,16 @@
if (!has_extents)
return ret;
+ if (need_find_last_extent && *last_extent == first_key.offset) {
+ /*
+ * We don't have any leafs between our current one and the one
+ * we processed before that can have file extent items for our
+ * inode (and have a generation number smaller than our current
+ * transaction id).
+ */
+ need_find_last_extent = false;
+ }
+
/*
* Because we use btrfs_search_forward we could skip leaves that were
* not modified and then assume *last_extent is valid when it really
@@ -3537,7 +3546,7 @@
0, 0);
if (ret)
break;
- *last_extent = offset + len;
+ *last_extent = extent_end;
}
/*
* Need to let the callers know we dropped the path so they should
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 6cb82f6..340a92d 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -508,6 +508,44 @@
ret = 1;
device->fs_devices = fs_devices;
} else if (!device->name || strcmp(device->name->str, path)) {
+ /*
+ * When FS is already mounted.
+ * 1. If you are here and if the device->name is NULL that
+ * means this device was missing at time of FS mount.
+ * 2. If you are here and if the device->name is different
+ * from 'path' that means either
+ * a. The same device disappeared and reappeared with
+ * different name. or
+ * b. The missing-disk-which-was-replaced, has
+ * reappeared now.
+ *
+ * We must allow 1 and 2a above. But 2b would be a spurious
+ * and unintentional.
+ *
+ * Further in case of 1 and 2a above, the disk at 'path'
+ * would have missed some transaction when it was away and
+ * in case of 2a the stale bdev has to be updated as well.
+ * 2b must not be allowed at all time.
+ */
+
+ /*
+ * As of now don't allow update to btrfs_fs_device through
+ * the btrfs dev scan cli, after FS has been mounted.
+ */
+ if (fs_devices->opened) {
+ return -EBUSY;
+ } else {
+ /*
+ * That is if the FS is _not_ mounted and if you
+ * are here, that means there is more than one
+ * disk with same uuid and devid.We keep the one
+ * with larger generation number or the last-in if
+ * generation are equal.
+ */
+ if (found_transid < device->generation)
+ return -EEXIST;
+ }
+
name = rcu_string_strdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
@@ -519,6 +557,15 @@
}
}
+ /*
+ * Unmount does not free the btrfs_device struct but would zero
+ * generation along with most of the other members. So just update
+ * it back. We need it to pick the disk with largest generation
+ * (as above).
+ */
+ if (!fs_devices->opened)
+ device->generation = found_transid;
+
if (found_transid > fs_devices->latest_trans) {
fs_devices->latest_devid = devid;
fs_devices->latest_trans = found_transid;
@@ -1436,7 +1483,7 @@
btrfs_set_device_io_align(leaf, dev_item, device->io_align);
btrfs_set_device_io_width(leaf, dev_item, device->io_width);
btrfs_set_device_sector_size(leaf, dev_item, device->sector_size);
- btrfs_set_device_total_bytes(leaf, dev_item, device->total_bytes);
+ btrfs_set_device_total_bytes(leaf, dev_item, device->disk_total_bytes);
btrfs_set_device_bytes_used(leaf, dev_item, device->bytes_used);
btrfs_set_device_group(leaf, dev_item, 0);
btrfs_set_device_seek_speed(leaf, dev_item, 0);
@@ -1671,7 +1718,7 @@
device->fs_devices->total_devices--;
if (device->missing)
- root->fs_info->fs_devices->missing_devices--;
+ device->fs_devices->missing_devices--;
next_device = list_entry(root->fs_info->fs_devices->devices.next,
struct btrfs_device, dev_list);
@@ -1801,8 +1848,12 @@
if (srcdev->bdev) {
fs_info->fs_devices->open_devices--;
- /* zero out the old super */
- btrfs_scratch_superblock(srcdev);
+ /*
+ * zero out the old super if it is not writable
+ * (e.g. seed device)
+ */
+ if (srcdev->writeable)
+ btrfs_scratch_superblock(srcdev);
}
call_rcu(&srcdev->rcu, free_device);
@@ -1941,6 +1992,9 @@
fs_devices->seeding = 0;
fs_devices->num_devices = 0;
fs_devices->open_devices = 0;
+ fs_devices->missing_devices = 0;
+ fs_devices->num_can_discard = 0;
+ fs_devices->rotating = 0;
fs_devices->seed = seed_devices;
generate_random_uuid(fs_devices->fsid);
@@ -5800,7 +5854,8 @@
else
generate_random_uuid(dev->uuid);
- btrfs_init_work(&dev->work, pending_bios_fn, NULL, NULL);
+ btrfs_init_work(&dev->work, btrfs_submit_helper,
+ pending_bios_fn, NULL, NULL);
return dev;
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index ac4f260..889b984 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -207,6 +207,19 @@
return 0;
}
+static long cifs_fallocate(struct file *file, int mode, loff_t off, loff_t len)
+{
+ struct super_block *sb = file->f_path.dentry->d_sb;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
+ struct TCP_Server_Info *server = tcon->ses->server;
+
+ if (server->ops->fallocate)
+ return server->ops->fallocate(file, tcon, mode, off, len);
+
+ return -EOPNOTSUPP;
+}
+
static int cifs_permission(struct inode *inode, int mask)
{
struct cifs_sb_info *cifs_sb;
@@ -812,8 +825,9 @@
if (!(S_ISREG(inode->i_mode)))
return -EINVAL;
- /* check if file is oplocked */
- if (((arg == F_RDLCK) && CIFS_CACHE_READ(CIFS_I(inode))) ||
+ /* Check if file is oplocked if this is request for new lease */
+ if (arg == F_UNLCK ||
+ ((arg == F_RDLCK) && CIFS_CACHE_READ(CIFS_I(inode))) ||
((arg == F_WRLCK) && CIFS_CACHE_WRITE(CIFS_I(inode))))
return generic_setlease(file, arg, lease);
else if (tlink_tcon(cfile->tlink)->local_lease &&
@@ -908,6 +922,7 @@
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_strict_ops = {
@@ -927,6 +942,7 @@
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_direct_ops = {
@@ -947,6 +963,7 @@
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_nobrl_ops = {
@@ -965,6 +982,7 @@
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_strict_nobrl_ops = {
@@ -983,6 +1001,7 @@
.unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_file_direct_nobrl_ops = {
@@ -1002,6 +1021,7 @@
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
.setlease = cifs_setlease,
+ .fallocate = cifs_fallocate,
};
const struct file_operations cifs_dir_ops = {
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 0012e1e..dfc731b 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -409,6 +409,10 @@
/* get mtu credits */
int (*wait_mtu_credits)(struct TCP_Server_Info *, unsigned int,
unsigned int *, unsigned int *);
+ /* check if we need to issue closedir */
+ bool (*dir_needs_close)(struct cifsFileInfo *);
+ long (*fallocate)(struct file *, struct cifs_tcon *, int, loff_t,
+ loff_t);
};
struct smb_version_values {
@@ -883,6 +887,7 @@
for this mount even if server would support */
bool local_lease:1; /* check leases (only) on local system not remote */
bool broken_posix_open; /* e.g. Samba server versions < 3.3.2, 3.2.9 */
+ bool broken_sparse_sup; /* if server or share does not support sparse */
bool need_reconnect:1; /* connection reset, tid now invalid */
#ifdef CONFIG_CIFS_SMB2
bool print:1; /* set if connection to printer share */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 33df36e..5f9822ac 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2253,6 +2253,29 @@
/* minimum includes first three fields, and empty FS Name */
#define MIN_FS_ATTR_INFO_SIZE 12
+
+/* List of FileSystemAttributes - see 2.5.1 of MS-FSCC */
+#define FILE_SUPPORT_INTEGRITY_STREAMS 0x04000000
+#define FILE_SUPPORTS_USN_JOURNAL 0x02000000
+#define FILE_SUPPORTS_OPEN_BY_FILE_ID 0x01000000
+#define FILE_SUPPORTS_EXTENDED_ATTRIBUTES 0x00800000
+#define FILE_SUPPORTS_HARD_LINKS 0x00400000
+#define FILE_SUPPORTS_TRANSACTIONS 0x00200000
+#define FILE_SEQUENTIAL_WRITE_ONCE 0x00100000
+#define FILE_READ_ONLY_VOLUME 0x00080000
+#define FILE_NAMED_STREAMS 0x00040000
+#define FILE_SUPPORTS_ENCRYPTION 0x00020000
+#define FILE_SUPPORTS_OBJECT_IDS 0x00010000
+#define FILE_VOLUME_IS_COMPRESSED 0x00008000
+#define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
+#define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
+#define FILE_SUPPORTS_SPARSE_FILES 0x00000040
+#define FILE_VOLUME_QUOTAS 0x00000020
+#define FILE_FILE_COMPRESSION 0x00000010
+#define FILE_PERSISTENT_ACLS 0x00000008
+#define FILE_UNICODE_ON_DISK 0x00000004
+#define FILE_CASE_PRESERVED_NAMES 0x00000002
+#define FILE_CASE_SENSITIVE_SEARCH 0x00000001
typedef struct {
__le32 Attributes;
__le32 MaxPathNameComponentLength;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 4ab2f79..d5fec92 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -762,7 +762,7 @@
cifs_dbg(FYI, "Freeing private data in close dir\n");
spin_lock(&cifs_file_list_lock);
- if (!cfile->srch_inf.endOfSearch && !cfile->invalidHandle) {
+ if (server->ops->dir_needs_close(cfile)) {
cfile->invalidHandle = true;
spin_unlock(&cifs_file_list_lock);
if (server->ops->close_dir)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 426d6c6..949ec90 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1727,6 +1727,12 @@
target_dentry, to_name);
}
+ /* force revalidate to go get info when needed */
+ CIFS_I(source_dir)->time = CIFS_I(target_dir)->time = 0;
+
+ source_dir->i_ctime = source_dir->i_mtime = target_dir->i_ctime =
+ target_dir->i_mtime = current_fs_time(source_dir->i_sb);
+
cifs_rename_exit:
kfree(info_buf_source);
kfree(from_name);
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 81340c6..b7415d5 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -574,13 +574,6 @@
cinode->oplock = 0;
}
-static int
-cifs_oplock_break_wait(void *unused)
-{
- schedule();
- return signal_pending(current) ? -ERESTARTSYS : 0;
-}
-
/*
* We wait for oplock breaks to be processed before we attempt to perform
* writes.
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index b15862e..798c80a 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -593,7 +593,7 @@
/* close and restart search */
cifs_dbg(FYI, "search backing up - close and restart search\n");
spin_lock(&cifs_file_list_lock);
- if (!cfile->srch_inf.endOfSearch && !cfile->invalidHandle) {
+ if (server->ops->dir_needs_close(cfile)) {
cfile->invalidHandle = true;
spin_unlock(&cifs_file_list_lock);
if (server->ops->close)
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index 5e8c22d..1a6df4b 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -1015,6 +1015,12 @@
return CIFS_SB(inode->i_sb)->wsize;
}
+static bool
+cifs_dir_needs_close(struct cifsFileInfo *cfile)
+{
+ return !cfile->srch_inf.endOfSearch && !cfile->invalidHandle;
+}
+
struct smb_version_operations smb1_operations = {
.send_cancel = send_nt_cancel,
.compare_fids = cifs_compare_fids,
@@ -1086,6 +1092,7 @@
.create_mf_symlink = cifs_create_mf_symlink,
.is_read_op = cifs_is_read_op,
.wp_retry_size = cifs_wp_retry_size,
+ .dir_needs_close = cifs_dir_needs_close,
#ifdef CONFIG_CIFS_XATTR
.query_all_EAs = CIFSSMBQAllEAs,
.set_EA = CIFSSMBSetEA,
diff --git a/fs/cifs/smb2maperror.c b/fs/cifs/smb2maperror.c
index e31a9df..af59d03 100644
--- a/fs/cifs/smb2maperror.c
+++ b/fs/cifs/smb2maperror.c
@@ -214,7 +214,7 @@
{STATUS_BREAKPOINT, -EIO, "STATUS_BREAKPOINT"},
{STATUS_SINGLE_STEP, -EIO, "STATUS_SINGLE_STEP"},
{STATUS_BUFFER_OVERFLOW, -EIO, "STATUS_BUFFER_OVERFLOW"},
- {STATUS_NO_MORE_FILES, -EIO, "STATUS_NO_MORE_FILES"},
+ {STATUS_NO_MORE_FILES, -ENODATA, "STATUS_NO_MORE_FILES"},
{STATUS_WAKE_SYSTEM_DEBUGGER, -EIO, "STATUS_WAKE_SYSTEM_DEBUGGER"},
{STATUS_HANDLES_CLOSED, -EIO, "STATUS_HANDLES_CLOSED"},
{STATUS_NO_INHERITANCE, -EIO, "STATUS_NO_INHERITANCE"},
@@ -298,7 +298,7 @@
{STATUS_INVALID_PARAMETER, -EINVAL, "STATUS_INVALID_PARAMETER"},
{STATUS_NO_SUCH_DEVICE, -ENODEV, "STATUS_NO_SUCH_DEVICE"},
{STATUS_NO_SUCH_FILE, -ENOENT, "STATUS_NO_SUCH_FILE"},
- {STATUS_INVALID_DEVICE_REQUEST, -EIO, "STATUS_INVALID_DEVICE_REQUEST"},
+ {STATUS_INVALID_DEVICE_REQUEST, -EOPNOTSUPP, "STATUS_INVALID_DEVICE_REQUEST"},
{STATUS_END_OF_FILE, -ENODATA, "STATUS_END_OF_FILE"},
{STATUS_WRONG_VOLUME, -EIO, "STATUS_WRONG_VOLUME"},
{STATUS_NO_MEDIA_IN_DEVICE, -EIO, "STATUS_NO_MEDIA_IN_DEVICE"},
diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index f2e6ac2..4aa7a0f 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -178,9 +178,24 @@
/* Windows 7 server returns 24 bytes more */
if (clc_len + 20 == len && command == SMB2_OPLOCK_BREAK_HE)
return 0;
- /* server can return one byte more */
+ /* server can return one byte more due to implied bcc[0] */
if (clc_len == 4 + len + 1)
return 0;
+
+ /*
+ * MacOS server pads after SMB2.1 write response with 3 bytes
+ * of junk. Other servers match RFC1001 len to actual
+ * SMB2/SMB3 frame length (header + smb2 response specific data)
+ * Log the server error (once), but allow it and continue
+ * since the frame is parseable.
+ */
+ if (clc_len < 4 /* RFC1001 header size */ + len) {
+ printk_once(KERN_WARNING
+ "SMB2 server sent bad RFC1001 len %d not %d\n",
+ len, clc_len - 4);
+ return 0;
+ }
+
return 1;
}
return 0;
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 77f8aeb..5a48aa2 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -731,11 +731,72 @@
return SMB2_write(xid, parms, written, iov, nr_segs);
}
+/* Set or clear the SPARSE_FILE attribute based on value passed in setsparse */
+static bool smb2_set_sparse(const unsigned int xid, struct cifs_tcon *tcon,
+ struct cifsFileInfo *cfile, struct inode *inode, __u8 setsparse)
+{
+ struct cifsInodeInfo *cifsi;
+ int rc;
+
+ cifsi = CIFS_I(inode);
+
+ /* if file already sparse don't bother setting sparse again */
+ if ((cifsi->cifsAttrs & FILE_ATTRIBUTE_SPARSE_FILE) && setsparse)
+ return true; /* already sparse */
+
+ if (!(cifsi->cifsAttrs & FILE_ATTRIBUTE_SPARSE_FILE) && !setsparse)
+ return true; /* already not sparse */
+
+ /*
+ * Can't check for sparse support on share the usual way via the
+ * FS attribute info (FILE_SUPPORTS_SPARSE_FILES) on the share
+ * since Samba server doesn't set the flag on the share, yet
+ * supports the set sparse FSCTL and returns sparse correctly
+ * in the file attributes. If we fail setting sparse though we
+ * mark that server does not support sparse files for this share
+ * to avoid repeatedly sending the unsupported fsctl to server
+ * if the file is repeatedly extended.
+ */
+ if (tcon->broken_sparse_sup)
+ return false;
+
+ rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid,
+ cfile->fid.volatile_fid, FSCTL_SET_SPARSE,
+ true /* is_fctl */, &setsparse, 1, NULL, NULL);
+ if (rc) {
+ tcon->broken_sparse_sup = true;
+ cifs_dbg(FYI, "set sparse rc = %d\n", rc);
+ return false;
+ }
+
+ if (setsparse)
+ cifsi->cifsAttrs |= FILE_ATTRIBUTE_SPARSE_FILE;
+ else
+ cifsi->cifsAttrs &= (~FILE_ATTRIBUTE_SPARSE_FILE);
+
+ return true;
+}
+
static int
smb2_set_file_size(const unsigned int xid, struct cifs_tcon *tcon,
struct cifsFileInfo *cfile, __u64 size, bool set_alloc)
{
__le64 eof = cpu_to_le64(size);
+ struct inode *inode;
+
+ /*
+ * If extending file more than one page make sparse. Many Linux fs
+ * make files sparse by default when extending via ftruncate
+ */
+ inode = cfile->dentry->d_inode;
+
+ if (!set_alloc && (size > inode->i_size + 8192)) {
+ __u8 set_sparse = 1;
+
+ /* whether set sparse succeeds or not, extend the file */
+ smb2_set_sparse(xid, tcon, cfile, inode, set_sparse);
+ }
+
return SMB2_set_eof(xid, tcon, cfile->fid.persistent_fid,
cfile->fid.volatile_fid, cfile->pid, &eof, false);
}
@@ -954,6 +1015,105 @@
return rc;
}
+static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon,
+ loff_t offset, loff_t len, bool keep_size)
+{
+ struct inode *inode;
+ struct cifsInodeInfo *cifsi;
+ struct cifsFileInfo *cfile = file->private_data;
+ struct file_zero_data_information fsctl_buf;
+ long rc;
+ unsigned int xid;
+
+ xid = get_xid();
+
+ inode = cfile->dentry->d_inode;
+ cifsi = CIFS_I(inode);
+
+ /* if file not oplocked can't be sure whether asking to extend size */
+ if (!CIFS_CACHE_READ(cifsi))
+ if (keep_size == false)
+ return -EOPNOTSUPP;
+
+ /*
+ * Must check if file sparse since fallocate -z (zero range) assumes
+ * non-sparse allocation
+ */
+ if (!(cifsi->cifsAttrs & FILE_ATTRIBUTE_SPARSE_FILE))
+ return -EOPNOTSUPP;
+
+ /*
+ * need to make sure we are not asked to extend the file since the SMB3
+ * fsctl does not change the file size. In the future we could change
+ * this to zero the first part of the range then set the file size
+ * which for a non sparse file would zero the newly extended range
+ */
+ if (keep_size == false)
+ if (i_size_read(inode) < offset + len)
+ return -EOPNOTSUPP;
+
+ cifs_dbg(FYI, "offset %lld len %lld", offset, len);
+
+ fsctl_buf.FileOffset = cpu_to_le64(offset);
+ fsctl_buf.BeyondFinalZero = cpu_to_le64(offset + len);
+
+ rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid,
+ cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA,
+ true /* is_fctl */, (char *)&fsctl_buf,
+ sizeof(struct file_zero_data_information), NULL, NULL);
+ free_xid(xid);
+ return rc;
+}
+
+static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon,
+ loff_t offset, loff_t len)
+{
+ struct inode *inode;
+ struct cifsInodeInfo *cifsi;
+ struct cifsFileInfo *cfile = file->private_data;
+ struct file_zero_data_information fsctl_buf;
+ long rc;
+ unsigned int xid;
+ __u8 set_sparse = 1;
+
+ xid = get_xid();
+
+ inode = cfile->dentry->d_inode;
+ cifsi = CIFS_I(inode);
+
+ /* Need to make file sparse, if not already, before freeing range. */
+ /* Consider adding equivalent for compressed since it could also work */
+ if (!smb2_set_sparse(xid, tcon, cfile, inode, set_sparse))
+ return -EOPNOTSUPP;
+
+ cifs_dbg(FYI, "offset %lld len %lld", offset, len);
+
+ fsctl_buf.FileOffset = cpu_to_le64(offset);
+ fsctl_buf.BeyondFinalZero = cpu_to_le64(offset + len);
+
+ rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid,
+ cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA,
+ true /* is_fctl */, (char *)&fsctl_buf,
+ sizeof(struct file_zero_data_information), NULL, NULL);
+ free_xid(xid);
+ return rc;
+}
+
+static long smb3_fallocate(struct file *file, struct cifs_tcon *tcon, int mode,
+ loff_t off, loff_t len)
+{
+ /* KEEP_SIZE already checked for by do_fallocate */
+ if (mode & FALLOC_FL_PUNCH_HOLE)
+ return smb3_punch_hole(file, tcon, off, len);
+ else if (mode & FALLOC_FL_ZERO_RANGE) {
+ if (mode & FALLOC_FL_KEEP_SIZE)
+ return smb3_zero_range(file, tcon, off, len, true);
+ return smb3_zero_range(file, tcon, off, len, false);
+ }
+
+ return -EOPNOTSUPP;
+}
+
static void
smb2_downgrade_oplock(struct TCP_Server_Info *server,
struct cifsInodeInfo *cinode, bool set_level2)
@@ -1161,6 +1321,12 @@
SMB2_MAX_BUFFER_SIZE);
}
+static bool
+smb2_dir_needs_close(struct cifsFileInfo *cfile)
+{
+ return !cfile->invalidHandle;
+}
+
struct smb_version_operations smb20_operations = {
.compare_fids = smb2_compare_fids,
.setup_request = smb2_setup_request,
@@ -1236,6 +1402,7 @@
.parse_lease_buf = smb2_parse_lease_buf,
.clone_range = smb2_clone_range,
.wp_retry_size = smb2_wp_retry_size,
+ .dir_needs_close = smb2_dir_needs_close,
};
struct smb_version_operations smb21_operations = {
@@ -1313,6 +1480,7 @@
.parse_lease_buf = smb2_parse_lease_buf,
.clone_range = smb2_clone_range,
.wp_retry_size = smb2_wp_retry_size,
+ .dir_needs_close = smb2_dir_needs_close,
};
struct smb_version_operations smb30_operations = {
@@ -1393,6 +1561,8 @@
.clone_range = smb2_clone_range,
.validate_negotiate = smb3_validate_negotiate,
.wp_retry_size = smb2_wp_retry_size,
+ .dir_needs_close = smb2_dir_needs_close,
+ .fallocate = smb3_fallocate,
};
struct smb_version_values smb20_values = {
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 42ebc1a..fa0dd04 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -907,7 +907,8 @@
tcon_error_exit:
if (rsp->hdr.Status == STATUS_BAD_NETWORK_NAME) {
cifs_dbg(VFS, "BAD_NETWORK_NAME: %s\n", tree);
- tcon->bad_network_name = true;
+ if (tcon)
+ tcon->bad_network_name = true;
}
goto tcon_exit;
}
@@ -1224,7 +1225,9 @@
cifs_dbg(FYI, "SMB2 IOCTL\n");
- *out_data = NULL;
+ if (out_data != NULL)
+ *out_data = NULL;
+
/* zero out returned data len, in case of error */
if (plen)
*plen = 0;
@@ -2177,6 +2180,10 @@
rsp = (struct smb2_query_directory_rsp *)iov[0].iov_base;
if (rc) {
+ if (rc == -ENODATA && rsp->hdr.Status == STATUS_NO_MORE_FILES) {
+ srch_inf->endOfSearch = true;
+ rc = 0;
+ }
cifs_stats_fail_inc(tcon, SMB2_QUERY_DIRECTORY_HE);
goto qdir_exit;
}
@@ -2214,11 +2221,6 @@
else
cifs_dbg(VFS, "illegal search buffer type\n");
- if (rsp->hdr.Status == STATUS_NO_MORE_FILES)
- srch_inf->endOfSearch = 1;
- else
- srch_inf->endOfSearch = 0;
-
return rc;
qdir_exit:
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index 69f3595..fbe486c 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -573,6 +573,12 @@
__u32 Reserved2;
} __packed;
+/* this goes in the ioctl buffer when doing FSCTL_SET_ZERO_DATA */
+struct file_zero_data_information {
+ __le64 FileOffset;
+ __le64 BeyondFinalZero;
+} __packed;
+
struct copychunk_ioctl_rsp {
__le32 ChunksWritten;
__le32 ChunkBytesWritten;
diff --git a/fs/cifs/smbfsctl.h b/fs/cifs/smbfsctl.h
index 0e538b5..83efa59 100644
--- a/fs/cifs/smbfsctl.h
+++ b/fs/cifs/smbfsctl.h
@@ -63,7 +63,7 @@
#define FSCTL_SET_OBJECT_ID_EXTENDED 0x000900BC /* BB add struct */
#define FSCTL_CREATE_OR_GET_OBJECT_ID 0x000900C0 /* BB add struct */
#define FSCTL_SET_SPARSE 0x000900C4 /* BB add struct */
-#define FSCTL_SET_ZERO_DATA 0x000900C8 /* BB add struct */
+#define FSCTL_SET_ZERO_DATA 0x000980C8
#define FSCTL_SET_ENCRYPTION 0x000900D7 /* BB add struct */
#define FSCTL_ENCRYPTION_FSCTL_IO 0x000900DB /* BB add struct */
#define FSCTL_WRITE_RAW_ENCRYPTED 0x000900DF /* BB add struct */
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 08cdfe5..622e882 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2828,8 +2828,9 @@
*/
overhead += ngroups * (2 + sbi->s_itb_per_group);
- /* Add the journal blocks as well */
- overhead += sbi->s_journal->j_maxlen;
+ /* Add the internal journal blocks as well */
+ if (sbi->s_journal && !sbi->journal_bdev)
+ overhead += sbi->s_journal->j_maxlen;
sbi->s_overhead_last = overhead;
smp_wmb();
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 5b19760..b0c225c 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1825,7 +1825,7 @@
/*
* Special error return code only used by dx_probe() and its callers.
*/
-#define ERR_BAD_DX_DIR -75000
+#define ERR_BAD_DX_DIR (-(MAX_ERRNO - 1))
/*
* Timeout and state flag for lazy initialization inode thread.
@@ -2454,6 +2454,22 @@
up_write(&EXT4_I(inode)->i_data_sem);
}
+/* Update i_size, i_disksize. Requires i_mutex to avoid races with truncate */
+static inline int ext4_update_inode_size(struct inode *inode, loff_t newsize)
+{
+ int changed = 0;
+
+ if (newsize > inode->i_size) {
+ i_size_write(inode, newsize);
+ changed = 1;
+ }
+ if (newsize > EXT4_I(inode)->i_disksize) {
+ ext4_update_i_disksize(inode, newsize);
+ changed |= 2;
+ }
+ return changed;
+}
+
struct ext4_group_info {
unsigned long bb_state;
struct rb_root bb_free_root;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 76c2df3..74292a7 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4665,7 +4665,8 @@
}
static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
- ext4_lblk_t len, int flags, int mode)
+ ext4_lblk_t len, loff_t new_size,
+ int flags, int mode)
{
struct inode *inode = file_inode(file);
handle_t *handle;
@@ -4674,8 +4675,10 @@
int retries = 0;
struct ext4_map_blocks map;
unsigned int credits;
+ loff_t epos;
map.m_lblk = offset;
+ map.m_len = len;
/*
* Don't normalize the request if it can fit in one extent so
* that it doesn't get unnecessarily split into multiple
@@ -4690,9 +4693,7 @@
credits = ext4_chunk_trans_blocks(inode, len);
retry:
- while (ret >= 0 && ret < len) {
- map.m_lblk = map.m_lblk + ret;
- map.m_len = len = len - ret;
+ while (ret >= 0 && len) {
handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS,
credits);
if (IS_ERR(handle)) {
@@ -4709,6 +4710,21 @@
ret2 = ext4_journal_stop(handle);
break;
}
+ map.m_lblk += ret;
+ map.m_len = len = len - ret;
+ epos = (loff_t)map.m_lblk << inode->i_blkbits;
+ inode->i_ctime = ext4_current_time(inode);
+ if (new_size) {
+ if (epos > new_size)
+ epos = new_size;
+ if (ext4_update_inode_size(inode, epos) & 0x1)
+ inode->i_mtime = inode->i_ctime;
+ } else {
+ if (epos > inode->i_size)
+ ext4_set_inode_flag(inode,
+ EXT4_INODE_EOFBLOCKS);
+ }
+ ext4_mark_inode_dirty(handle, inode);
ret2 = ext4_journal_stop(handle);
if (ret2)
break;
@@ -4731,7 +4747,8 @@
loff_t new_size = 0;
int ret = 0;
int flags;
- int partial;
+ int credits;
+ int partial_begin, partial_end;
loff_t start, end;
ext4_lblk_t lblk;
struct address_space *mapping = inode->i_mapping;
@@ -4771,7 +4788,8 @@
if (start < offset || end > offset + len)
return -EINVAL;
- partial = (offset + len) & ((1 << blkbits) - 1);
+ partial_begin = offset & ((1 << blkbits) - 1);
+ partial_end = (offset + len) & ((1 << blkbits) - 1);
lblk = start >> blkbits;
max_blocks = (end >> blkbits);
@@ -4805,7 +4823,7 @@
* If we have a partial block after EOF we have to allocate
* the entire block.
*/
- if (partial)
+ if (partial_end)
max_blocks += 1;
}
@@ -4813,6 +4831,7 @@
/* Now release the pages and zero block aligned part of pages*/
truncate_pagecache_range(inode, start, end - 1);
+ inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
/* Wait all existing dio workers, newcomers will block on i_mutex */
ext4_inode_block_unlocked_dio(inode);
@@ -4825,13 +4844,22 @@
if (ret)
goto out_dio;
- ret = ext4_alloc_file_blocks(file, lblk, max_blocks, flags,
- mode);
+ ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
+ flags, mode);
if (ret)
goto out_dio;
}
+ if (!partial_begin && !partial_end)
+ goto out_dio;
- handle = ext4_journal_start(inode, EXT4_HT_MISC, 4);
+ /*
+ * In worst case we have to writeout two nonadjacent unwritten
+ * blocks and update the inode
+ */
+ credits = (2 * ext4_ext_index_trans_blocks(inode, 2)) + 1;
+ if (ext4_should_journal_data(inode))
+ credits += 2;
+ handle = ext4_journal_start(inode, EXT4_HT_MISC, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
ext4_std_error(inode->i_sb, ret);
@@ -4839,12 +4867,8 @@
}
inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
-
if (new_size) {
- if (new_size > i_size_read(inode))
- i_size_write(inode, new_size);
- if (new_size > EXT4_I(inode)->i_disksize)
- ext4_update_i_disksize(inode, new_size);
+ ext4_update_inode_size(inode, new_size);
} else {
/*
* Mark that we allocate beyond EOF so the subsequent truncate
@@ -4853,7 +4877,6 @@
if ((offset + len) > i_size_read(inode))
ext4_set_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
}
-
ext4_mark_inode_dirty(handle, inode);
/* Zero out partial block at the edges of the range */
@@ -4880,13 +4903,11 @@
long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
- handle_t *handle;
loff_t new_size = 0;
unsigned int max_blocks;
int ret = 0;
int flags;
ext4_lblk_t lblk;
- struct timespec tv;
unsigned int blkbits = inode->i_blkbits;
/* Return error if mode is not supported */
@@ -4937,36 +4958,15 @@
goto out;
}
- ret = ext4_alloc_file_blocks(file, lblk, max_blocks, flags, mode);
+ ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
+ flags, mode);
if (ret)
goto out;
- handle = ext4_journal_start(inode, EXT4_HT_INODE, 2);
- if (IS_ERR(handle))
- goto out;
-
- tv = inode->i_ctime = ext4_current_time(inode);
-
- if (new_size) {
- if (new_size > i_size_read(inode)) {
- i_size_write(inode, new_size);
- inode->i_mtime = tv;
- }
- if (new_size > EXT4_I(inode)->i_disksize)
- ext4_update_i_disksize(inode, new_size);
- } else {
- /*
- * Mark that we allocate beyond EOF so the subsequent truncate
- * can proceed even if the new size is the same as i_size.
- */
- if ((offset + len) > i_size_read(inode))
- ext4_set_inode_flag(inode, EXT4_INODE_EOFBLOCKS);
+ if (file->f_flags & O_SYNC && EXT4_SB(inode->i_sb)->s_journal) {
+ ret = jbd2_complete_transaction(EXT4_SB(inode->i_sb)->s_journal,
+ EXT4_I(inode)->i_sync_tid);
}
- ext4_mark_inode_dirty(handle, inode);
- if (file->f_flags & O_SYNC)
- ext4_handle_sync(handle);
-
- ext4_journal_stop(handle);
out:
mutex_unlock(&inode->i_mutex);
trace_ext4_fallocate_exit(inode, offset, max_blocks, ret);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 367a60c..3aa26e9 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1055,27 +1055,11 @@
} else
copied = block_write_end(file, mapping, pos,
len, copied, page, fsdata);
-
/*
- * No need to use i_size_read() here, the i_size
- * cannot change under us because we hole i_mutex.
- *
- * But it's important to update i_size while still holding page lock:
+ * it's important to update i_size while still holding page lock:
* page writeout could otherwise come in and zero beyond i_size.
*/
- if (pos + copied > inode->i_size) {
- i_size_write(inode, pos + copied);
- i_size_changed = 1;
- }
-
- if (pos + copied > EXT4_I(inode)->i_disksize) {
- /* We need to mark inode dirty even if
- * new_i_size is less that inode->i_size
- * but greater than i_disksize. (hint delalloc)
- */
- ext4_update_i_disksize(inode, (pos + copied));
- i_size_changed = 1;
- }
+ i_size_changed = ext4_update_inode_size(inode, pos + copied);
unlock_page(page);
page_cache_release(page);
@@ -1123,7 +1107,7 @@
int ret = 0, ret2;
int partial = 0;
unsigned from, to;
- loff_t new_i_size;
+ int size_changed = 0;
trace_ext4_journalled_write_end(inode, pos, len, copied);
from = pos & (PAGE_CACHE_SIZE - 1);
@@ -1146,20 +1130,18 @@
if (!partial)
SetPageUptodate(page);
}
- new_i_size = pos + copied;
- if (new_i_size > inode->i_size)
- i_size_write(inode, pos+copied);
+ size_changed = ext4_update_inode_size(inode, pos + copied);
ext4_set_inode_state(inode, EXT4_STATE_JDATA);
EXT4_I(inode)->i_datasync_tid = handle->h_transaction->t_tid;
- if (new_i_size > EXT4_I(inode)->i_disksize) {
- ext4_update_i_disksize(inode, new_i_size);
+ unlock_page(page);
+ page_cache_release(page);
+
+ if (size_changed) {
ret2 = ext4_mark_inode_dirty(handle, inode);
if (!ret)
ret = ret2;
}
- unlock_page(page);
- page_cache_release(page);
if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
@@ -2095,6 +2077,7 @@
struct ext4_map_blocks *map = &mpd->map;
int err;
loff_t disksize;
+ int progress = 0;
mpd->io_submit.io_end->offset =
((loff_t)map->m_lblk) << inode->i_blkbits;
@@ -2111,8 +2094,11 @@
* is non-zero, a commit should free up blocks.
*/
if ((err == -ENOMEM) ||
- (err == -ENOSPC && ext4_count_free_clusters(sb)))
+ (err == -ENOSPC && ext4_count_free_clusters(sb))) {
+ if (progress)
+ goto update_disksize;
return err;
+ }
ext4_msg(sb, KERN_CRIT,
"Delayed block allocation failed for "
"inode %lu at logical offset %llu with"
@@ -2129,15 +2115,17 @@
*give_up_on_write = true;
return err;
}
+ progress = 1;
/*
* Update buffer state, submit mapped pages, and get us new
* extent to map
*/
err = mpage_map_and_submit_buffers(mpd);
if (err < 0)
- return err;
+ goto update_disksize;
} while (map->m_len);
+update_disksize:
/*
* Update on-disk size after IO is submitted. Races with
* truncate are avoided by checking i_size under i_data_sem.
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9560277..8b0f9ef 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1412,6 +1412,8 @@
int last = first + count - 1;
struct super_block *sb = e4b->bd_sb;
+ if (WARN_ON(count == 0))
+ return;
BUG_ON(last >= (sb->s_blocksize << 3));
assert_spin_locked(ext4_group_lock_ptr(sb, e4b->bd_group));
/* Don't bother if the block group is corrupt. */
@@ -3221,6 +3223,8 @@
int err;
if (pa == NULL) {
+ if (ac->ac_f_ex.fe_len == 0)
+ return;
err = ext4_mb_load_buddy(ac->ac_sb, ac->ac_f_ex.fe_group, &e4b);
if (err) {
/*
@@ -3235,6 +3239,7 @@
mb_free_blocks(ac->ac_inode, &e4b, ac->ac_f_ex.fe_start,
ac->ac_f_ex.fe_len);
ext4_unlock_group(ac->ac_sb, ac->ac_f_ex.fe_group);
+ ext4_mb_unload_buddy(&e4b);
return;
}
if (pa->pa_type == MB_INODE_PA)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index b147a67..90a3cdc 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1227,7 +1227,7 @@
buffer */
int num = 0;
ext4_lblk_t nblocks;
- int i, err;
+ int i, err = 0;
int namelen;
*res_dir = NULL;
@@ -1264,7 +1264,11 @@
* return. Otherwise, fall back to doing a search the
* old fashioned way.
*/
- if (bh || (err != ERR_BAD_DX_DIR))
+ if (err == -ENOENT)
+ return NULL;
+ if (err && err != ERR_BAD_DX_DIR)
+ return ERR_PTR(err);
+ if (bh)
return bh;
dxtrace(printk(KERN_DEBUG "ext4_find_entry: dx failed, "
"falling back\n"));
@@ -1295,6 +1299,11 @@
}
num++;
bh = ext4_getblk(NULL, dir, b++, 0, &err);
+ if (unlikely(err)) {
+ if (ra_max == 0)
+ return ERR_PTR(err);
+ break;
+ }
bh_use[ra_max] = bh;
if (bh)
ll_rw_block(READ | REQ_META | REQ_PRIO,
@@ -1417,6 +1426,8 @@
return ERR_PTR(-ENAMETOOLONG);
bh = ext4_find_entry(dir, &dentry->d_name, &de, NULL);
+ if (IS_ERR(bh))
+ return (struct dentry *) bh;
inode = NULL;
if (bh) {
__u32 ino = le32_to_cpu(de->inode);
@@ -1450,6 +1461,8 @@
struct buffer_head *bh;
bh = ext4_find_entry(child->d_inode, &dotdot, &de, NULL);
+ if (IS_ERR(bh))
+ return (struct dentry *) bh;
if (!bh)
return ERR_PTR(-ENOENT);
ino = le32_to_cpu(de->inode);
@@ -2727,6 +2740,8 @@
retval = -ENOENT;
bh = ext4_find_entry(dir, &dentry->d_name, &de, NULL);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto end_rmdir;
@@ -2794,6 +2809,8 @@
retval = -ENOENT;
bh = ext4_find_entry(dir, &dentry->d_name, &de, NULL);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto end_unlink;
@@ -3121,6 +3138,8 @@
struct ext4_dir_entry_2 *de;
bh = ext4_find_entry(dir, d_name, &de, NULL);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (bh) {
retval = ext4_delete_entry(handle, dir, de, bh);
brelse(bh);
@@ -3128,7 +3147,8 @@
return retval;
}
-static void ext4_rename_delete(handle_t *handle, struct ext4_renament *ent)
+static void ext4_rename_delete(handle_t *handle, struct ext4_renament *ent,
+ int force_reread)
{
int retval;
/*
@@ -3140,7 +3160,8 @@
if (le32_to_cpu(ent->de->inode) != ent->inode->i_ino ||
ent->de->name_len != ent->dentry->d_name.len ||
strncmp(ent->de->name, ent->dentry->d_name.name,
- ent->de->name_len)) {
+ ent->de->name_len) ||
+ force_reread) {
retval = ext4_find_delete_entry(handle, ent->dir,
&ent->dentry->d_name);
} else {
@@ -3191,6 +3212,7 @@
.dentry = new_dentry,
.inode = new_dentry->d_inode,
};
+ int force_reread;
int retval;
dquot_initialize(old.dir);
@@ -3202,6 +3224,8 @@
dquot_initialize(new.inode);
old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de, NULL);
+ if (IS_ERR(old.bh))
+ return PTR_ERR(old.bh);
/*
* Check for inode number is _not_ due to possible IO errors.
* We might rmdir the source, keep it as pwd of some process
@@ -3214,6 +3238,10 @@
new.bh = ext4_find_entry(new.dir, &new.dentry->d_name,
&new.de, &new.inlined);
+ if (IS_ERR(new.bh)) {
+ retval = PTR_ERR(new.bh);
+ goto end_rename;
+ }
if (new.bh) {
if (!new.inode) {
brelse(new.bh);
@@ -3246,6 +3274,15 @@
if (retval)
goto end_rename;
}
+ /*
+ * If we're renaming a file within an inline_data dir and adding or
+ * setting the new dirent causes a conversion from inline_data to
+ * extents/blockmap, we need to force the dirent delete code to
+ * re-read the directory, or else we end up trying to delete a dirent
+ * from what is now the extent tree root (or a block map).
+ */
+ force_reread = (new.dir->i_ino == old.dir->i_ino &&
+ ext4_test_inode_flag(new.dir, EXT4_INODE_INLINE_DATA));
if (!new.bh) {
retval = ext4_add_entry(handle, new.dentry, old.inode);
if (retval)
@@ -3256,6 +3293,9 @@
if (retval)
goto end_rename;
}
+ if (force_reread)
+ force_reread = !ext4_test_inode_flag(new.dir,
+ EXT4_INODE_INLINE_DATA);
/*
* Like most other Unix systems, set the ctime for inodes on a
@@ -3267,7 +3307,7 @@
/*
* ok, that's it
*/
- ext4_rename_delete(handle, &old);
+ ext4_rename_delete(handle, &old, force_reread);
if (new.inode) {
ext4_dec_count(handle, new.inode);
@@ -3330,6 +3370,8 @@
old.bh = ext4_find_entry(old.dir, &old.dentry->d_name,
&old.de, &old.inlined);
+ if (IS_ERR(old.bh))
+ return PTR_ERR(old.bh);
/*
* Check for inode number is _not_ due to possible IO errors.
* We might rmdir the source, keep it as pwd of some process
@@ -3342,6 +3384,10 @@
new.bh = ext4_find_entry(new.dir, &new.dentry->d_name,
&new.de, &new.inlined);
+ if (IS_ERR(new.bh)) {
+ retval = PTR_ERR(new.bh);
+ goto end_rename;
+ }
/* RENAME_EXCHANGE case: old *and* new must both exist */
if (!new.bh || le32_to_cpu(new.de->inode) != new.inode->i_ino)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 32b43ad..0b28b36 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3181,9 +3181,9 @@
if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) {
- /* journal checksum v2 */
+ /* journal checksum v3 */
compat = 0;
- incompat = JBD2_FEATURE_INCOMPAT_CSUM_V2;
+ incompat = JBD2_FEATURE_INCOMPAT_CSUM_V3;
} else {
/* journal checksum v1 */
compat = JBD2_FEATURE_COMPAT_CHECKSUM;
@@ -3205,6 +3205,7 @@
jbd2_journal_clear_features(sbi->s_journal,
JBD2_FEATURE_COMPAT_CHECKSUM, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT |
+ JBD2_FEATURE_INCOMPAT_CSUM_V3 |
JBD2_FEATURE_INCOMPAT_CSUM_V2);
}
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 4556ce1..5ddaf86 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -61,7 +61,7 @@
return;
}
-static int isofs_read_inode(struct inode *);
+static int isofs_read_inode(struct inode *, int relocated);
static int isofs_statfs (struct dentry *, struct kstatfs *);
static struct kmem_cache *isofs_inode_cachep;
@@ -1259,7 +1259,7 @@
goto out;
}
-static int isofs_read_inode(struct inode *inode)
+static int isofs_read_inode(struct inode *inode, int relocated)
{
struct super_block *sb = inode->i_sb;
struct isofs_sb_info *sbi = ISOFS_SB(sb);
@@ -1404,7 +1404,7 @@
*/
if (!high_sierra) {
- parse_rock_ridge_inode(de, inode);
+ parse_rock_ridge_inode(de, inode, relocated);
/* if we want uid/gid set, override the rock ridge setting */
if (sbi->s_uid_set)
inode->i_uid = sbi->s_uid;
@@ -1483,9 +1483,10 @@
* offset that point to the underlying meta-data for the inode. The
* code below is otherwise similar to the iget() code in
* include/linux/fs.h */
-struct inode *isofs_iget(struct super_block *sb,
- unsigned long block,
- unsigned long offset)
+struct inode *__isofs_iget(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset,
+ int relocated)
{
unsigned long hashval;
struct inode *inode;
@@ -1507,7 +1508,7 @@
return ERR_PTR(-ENOMEM);
if (inode->i_state & I_NEW) {
- ret = isofs_read_inode(inode);
+ ret = isofs_read_inode(inode, relocated);
if (ret < 0) {
iget_failed(inode);
inode = ERR_PTR(ret);
diff --git a/fs/isofs/isofs.h b/fs/isofs/isofs.h
index 9916723..0ac4c1f 100644
--- a/fs/isofs/isofs.h
+++ b/fs/isofs/isofs.h
@@ -107,7 +107,7 @@
struct inode; /* To make gcc happy */
-extern int parse_rock_ridge_inode(struct iso_directory_record *, struct inode *);
+extern int parse_rock_ridge_inode(struct iso_directory_record *, struct inode *, int relocated);
extern int get_rock_ridge_filename(struct iso_directory_record *, char *, struct inode *);
extern int isofs_name_translate(struct iso_directory_record *, char *, struct inode *);
@@ -118,9 +118,24 @@
extern struct buffer_head *isofs_bread(struct inode *, sector_t);
extern int isofs_get_blocks(struct inode *, sector_t, struct buffer_head **, unsigned long);
-extern struct inode *isofs_iget(struct super_block *sb,
- unsigned long block,
- unsigned long offset);
+struct inode *__isofs_iget(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset,
+ int relocated);
+
+static inline struct inode *isofs_iget(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset)
+{
+ return __isofs_iget(sb, block, offset, 0);
+}
+
+static inline struct inode *isofs_iget_reloc(struct super_block *sb,
+ unsigned long block,
+ unsigned long offset)
+{
+ return __isofs_iget(sb, block, offset, 1);
+}
/* Because the inode number is no longer relevant to finding the
* underlying meta-data for an inode, we are free to choose a more
diff --git a/fs/isofs/rock.c b/fs/isofs/rock.c
index c0bf424..f488bba 100644
--- a/fs/isofs/rock.c
+++ b/fs/isofs/rock.c
@@ -288,12 +288,16 @@
goto out;
}
+#define RR_REGARD_XA 1
+#define RR_RELOC_DE 2
+
static int
parse_rock_ridge_inode_internal(struct iso_directory_record *de,
- struct inode *inode, int regard_xa)
+ struct inode *inode, int flags)
{
int symlink_len = 0;
int cnt, sig;
+ unsigned int reloc_block;
struct inode *reloc;
struct rock_ridge *rr;
int rootflag;
@@ -305,7 +309,7 @@
init_rock_state(&rs, inode);
setup_rock_ridge(de, inode, &rs);
- if (regard_xa) {
+ if (flags & RR_REGARD_XA) {
rs.chr += 14;
rs.len -= 14;
if (rs.len < 0)
@@ -485,12 +489,22 @@
"relocated directory\n");
goto out;
case SIG('C', 'L'):
- ISOFS_I(inode)->i_first_extent =
- isonum_733(rr->u.CL.location);
- reloc =
- isofs_iget(inode->i_sb,
- ISOFS_I(inode)->i_first_extent,
- 0);
+ if (flags & RR_RELOC_DE) {
+ printk(KERN_ERR
+ "ISOFS: Recursive directory relocation "
+ "is not supported\n");
+ goto eio;
+ }
+ reloc_block = isonum_733(rr->u.CL.location);
+ if (reloc_block == ISOFS_I(inode)->i_iget5_block &&
+ ISOFS_I(inode)->i_iget5_offset == 0) {
+ printk(KERN_ERR
+ "ISOFS: Directory relocation points to "
+ "itself\n");
+ goto eio;
+ }
+ ISOFS_I(inode)->i_first_extent = reloc_block;
+ reloc = isofs_iget_reloc(inode->i_sb, reloc_block, 0);
if (IS_ERR(reloc)) {
ret = PTR_ERR(reloc);
goto out;
@@ -637,9 +651,11 @@
return rpnt;
}
-int parse_rock_ridge_inode(struct iso_directory_record *de, struct inode *inode)
+int parse_rock_ridge_inode(struct iso_directory_record *de, struct inode *inode,
+ int relocated)
{
- int result = parse_rock_ridge_inode_internal(de, inode, 0);
+ int flags = relocated ? RR_RELOC_DE : 0;
+ int result = parse_rock_ridge_inode_internal(de, inode, flags);
/*
* if rockridge flag was reset and we didn't look for attributes
@@ -647,7 +663,8 @@
*/
if ((ISOFS_SB(inode->i_sb)->s_rock_offset == -1)
&& (ISOFS_SB(inode->i_sb)->s_rock == 2)) {
- result = parse_rock_ridge_inode_internal(de, inode, 14);
+ result = parse_rock_ridge_inode_internal(de, inode,
+ flags | RR_REGARD_XA);
}
return result;
}
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 6fac743..b73e021 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -97,7 +97,7 @@
struct commit_header *h;
__u32 csum;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return;
h = (struct commit_header *)(bh->b_data);
@@ -313,11 +313,11 @@
return checksum;
}
-static void write_tag_block(int tag_bytes, journal_block_tag_t *tag,
+static void write_tag_block(journal_t *j, journal_block_tag_t *tag,
unsigned long long block)
{
tag->t_blocknr = cpu_to_be32(block & (u32)~0);
- if (tag_bytes > JBD2_TAG_SIZE32)
+ if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_64BIT))
tag->t_blocknr_high = cpu_to_be32((block >> 31) >> 1);
}
@@ -327,7 +327,7 @@
struct jbd2_journal_block_tail *tail;
__u32 csum;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return;
tail = (struct jbd2_journal_block_tail *)(bh->b_data + j->j_blocksize -
@@ -340,12 +340,13 @@
static void jbd2_block_tag_csum_set(journal_t *j, journal_block_tag_t *tag,
struct buffer_head *bh, __u32 sequence)
{
+ journal_block_tag3_t *tag3 = (journal_block_tag3_t *)tag;
struct page *page = bh->b_page;
__u8 *addr;
__u32 csum32;
__be32 seq;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return;
seq = cpu_to_be32(sequence);
@@ -355,8 +356,10 @@
bh->b_size);
kunmap_atomic(addr);
- /* We only have space to store the lower 16 bits of the crc32c. */
- tag->t_checksum = cpu_to_be16(csum32);
+ if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ tag3->t_checksum = cpu_to_be32(csum32);
+ else
+ tag->t_checksum = cpu_to_be16(csum32);
}
/*
* jbd2_journal_commit_transaction
@@ -396,7 +399,7 @@
LIST_HEAD(io_bufs);
LIST_HEAD(log_bufs);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_journal_has_csum_v2or3(journal))
csum_size = sizeof(struct jbd2_journal_block_tail);
/*
@@ -690,7 +693,7 @@
tag_flag |= JBD2_FLAG_SAME_UUID;
tag = (journal_block_tag_t *) tagp;
- write_tag_block(tag_bytes, tag, jh2bh(jh)->b_blocknr);
+ write_tag_block(journal, tag, jh2bh(jh)->b_blocknr);
tag->t_flags = cpu_to_be16(tag_flag);
jbd2_block_tag_csum_set(journal, tag, wbuf[bufs],
commit_transaction->t_tid);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 67b8e30..19d74d8 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -124,7 +124,7 @@
/* Checksumming functions */
static int jbd2_verify_csum_type(journal_t *j, journal_superblock_t *sb)
{
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return 1;
return sb->s_checksum_type == JBD2_CRC32C_CHKSUM;
@@ -145,7 +145,7 @@
static int jbd2_superblock_csum_verify(journal_t *j, journal_superblock_t *sb)
{
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return 1;
return sb->s_checksum == jbd2_superblock_csum(j, sb);
@@ -153,7 +153,7 @@
static void jbd2_superblock_csum_set(journal_t *j, journal_superblock_t *sb)
{
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return;
sb->s_checksum = jbd2_superblock_csum(j, sb);
@@ -1522,21 +1522,29 @@
goto out;
}
- if (JBD2_HAS_COMPAT_FEATURE(journal, JBD2_FEATURE_COMPAT_CHECKSUM) &&
- JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2)) {
+ if (jbd2_journal_has_csum_v2or3(journal) &&
+ JBD2_HAS_COMPAT_FEATURE(journal, JBD2_FEATURE_COMPAT_CHECKSUM)) {
/* Can't have checksum v1 and v2 on at the same time! */
printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2 "
"at the same time!\n");
goto out;
}
+ if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) &&
+ JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
+ /* Can't have checksum v2 and v3 at the same time! */
+ printk(KERN_ERR "JBD2: Can't enable checksumming v2 and v3 "
+ "at the same time!\n");
+ goto out;
+ }
+
if (!jbd2_verify_csum_type(journal, sb)) {
printk(KERN_ERR "JBD2: Unknown checksum type\n");
goto out;
}
/* Load the checksum driver */
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2)) {
+ if (jbd2_journal_has_csum_v2or3(journal)) {
journal->j_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
if (IS_ERR(journal->j_chksum_driver)) {
printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n");
@@ -1553,7 +1561,7 @@
}
/* Precompute checksum seed for all metadata */
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_journal_has_csum_v2or3(journal))
journal->j_csum_seed = jbd2_chksum(journal, ~0, sb->s_uuid,
sizeof(sb->s_uuid));
@@ -1813,8 +1821,14 @@
if (!jbd2_journal_check_available_features(journal, compat, ro, incompat))
return 0;
- /* Asking for checksumming v2 and v1? Only give them v2. */
- if (incompat & JBD2_FEATURE_INCOMPAT_CSUM_V2 &&
+ /* If enabling v2 checksums, turn on v3 instead */
+ if (incompat & JBD2_FEATURE_INCOMPAT_CSUM_V2) {
+ incompat &= ~JBD2_FEATURE_INCOMPAT_CSUM_V2;
+ incompat |= JBD2_FEATURE_INCOMPAT_CSUM_V3;
+ }
+
+ /* Asking for checksumming v3 and v1? Only give them v3. */
+ if (incompat & JBD2_FEATURE_INCOMPAT_CSUM_V3 &&
compat & JBD2_FEATURE_COMPAT_CHECKSUM)
compat &= ~JBD2_FEATURE_COMPAT_CHECKSUM;
@@ -1823,8 +1837,8 @@
sb = journal->j_superblock;
- /* If enabling v2 checksums, update superblock */
- if (INCOMPAT_FEATURE_ON(JBD2_FEATURE_INCOMPAT_CSUM_V2)) {
+ /* If enabling v3 checksums, update superblock */
+ if (INCOMPAT_FEATURE_ON(JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
sb->s_checksum_type = JBD2_CRC32C_CHKSUM;
sb->s_feature_compat &=
~cpu_to_be32(JBD2_FEATURE_COMPAT_CHECKSUM);
@@ -1842,8 +1856,7 @@
}
/* Precompute checksum seed for all metadata */
- if (JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_journal_has_csum_v2or3(journal))
journal->j_csum_seed = jbd2_chksum(journal, ~0,
sb->s_uuid,
sizeof(sb->s_uuid));
@@ -1852,7 +1865,8 @@
/* If enabling v1 checksums, downgrade superblock */
if (COMPAT_FEATURE_ON(JBD2_FEATURE_COMPAT_CHECKSUM))
sb->s_feature_incompat &=
- ~cpu_to_be32(JBD2_FEATURE_INCOMPAT_CSUM_V2);
+ ~cpu_to_be32(JBD2_FEATURE_INCOMPAT_CSUM_V2 |
+ JBD2_FEATURE_INCOMPAT_CSUM_V3);
sb->s_feature_compat |= cpu_to_be32(compat);
sb->s_feature_ro_compat |= cpu_to_be32(ro);
@@ -2165,16 +2179,20 @@
*/
size_t journal_tag_bytes(journal_t *journal)
{
- journal_block_tag_t tag;
- size_t x = 0;
+ size_t sz;
+
+ if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ return sizeof(journal_block_tag3_t);
+
+ sz = sizeof(journal_block_tag_t);
if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
- x += sizeof(tag.t_checksum);
+ sz += sizeof(__u16);
if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
- return x + JBD2_TAG_SIZE64;
+ return sz;
else
- return x + JBD2_TAG_SIZE32;
+ return sz - sizeof(__u32);
}
/*
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 3b6bb19..9b329b5 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -181,7 +181,7 @@
__be32 provided;
__u32 calculated;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return 1;
tail = (struct jbd2_journal_block_tail *)(buf + j->j_blocksize -
@@ -205,7 +205,7 @@
int nr = 0, size = journal->j_blocksize;
int tag_bytes = journal_tag_bytes(journal);
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_journal_has_csum_v2or3(journal))
size -= sizeof(struct jbd2_journal_block_tail);
tagp = &bh->b_data[sizeof(journal_header_t)];
@@ -338,10 +338,11 @@
return err;
}
-static inline unsigned long long read_tag_block(int tag_bytes, journal_block_tag_t *tag)
+static inline unsigned long long read_tag_block(journal_t *journal,
+ journal_block_tag_t *tag)
{
unsigned long long block = be32_to_cpu(tag->t_blocknr);
- if (tag_bytes > JBD2_TAG_SIZE32)
+ if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32;
return block;
}
@@ -384,7 +385,7 @@
__be32 provided;
__u32 calculated;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return 1;
h = buf;
@@ -399,17 +400,21 @@
static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
void *buf, __u32 sequence)
{
+ journal_block_tag3_t *tag3 = (journal_block_tag3_t *)tag;
__u32 csum32;
__be32 seq;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return 1;
seq = cpu_to_be32(sequence);
csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq));
csum32 = jbd2_chksum(j, csum32, buf, j->j_blocksize);
- return tag->t_checksum == cpu_to_be16(csum32);
+ if (JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ return tag3->t_checksum == cpu_to_be32(csum32);
+ else
+ return tag->t_checksum == cpu_to_be16(csum32);
}
static int do_one_pass(journal_t *journal,
@@ -426,6 +431,7 @@
int tag_bytes = journal_tag_bytes(journal);
__u32 crc32_sum = ~0; /* Transactional Checksums */
int descr_csum_size = 0;
+ int block_error = 0;
/*
* First thing is to establish what we expect to find in the log
@@ -512,8 +518,7 @@
switch(blocktype) {
case JBD2_DESCRIPTOR_BLOCK:
/* Verify checksum first */
- if (JBD2_HAS_INCOMPAT_FEATURE(journal,
- JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_journal_has_csum_v2or3(journal))
descr_csum_size =
sizeof(struct jbd2_journal_block_tail);
if (descr_csum_size > 0 &&
@@ -574,7 +579,7 @@
unsigned long long blocknr;
J_ASSERT(obh != NULL);
- blocknr = read_tag_block(tag_bytes,
+ blocknr = read_tag_block(journal,
tag);
/* If the block has been
@@ -598,7 +603,8 @@
"checksum recovering "
"block %llu in log\n",
blocknr);
- continue;
+ block_error = 1;
+ goto skip_write;
}
/* Find a buffer for the new
@@ -797,7 +803,8 @@
success = -EIO;
}
}
-
+ if (block_error && success == 0)
+ success = -EIO;
return success;
failed:
@@ -811,7 +818,7 @@
__be32 provided;
__u32 calculated;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return 1;
tail = (struct jbd2_journal_revoke_tail *)(buf + j->j_blocksize -
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index 198c9c1..d5e95a1 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -91,8 +91,8 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/bio.h>
-#endif
#include <linux/log2.h>
+#endif
static struct kmem_cache *jbd2_revoke_record_cache;
static struct kmem_cache *jbd2_revoke_table_cache;
@@ -597,7 +597,7 @@
offset = *offsetp;
/* Do we need to leave space at the end for a checksum? */
- if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (jbd2_journal_has_csum_v2or3(journal))
csum_size = sizeof(struct jbd2_journal_revoke_tail);
/* Make sure we have a descriptor with space left for the record */
@@ -644,7 +644,7 @@
struct jbd2_journal_revoke_tail *tail;
__u32 csum;
- if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
+ if (!jbd2_journal_has_csum_v2or3(j))
return;
tail = (struct jbd2_journal_revoke_tail *)(bh->b_data + j->j_blocksize -
diff --git a/fs/locks.c b/fs/locks.c
index cb66fb0..bb08857 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1619,7 +1619,7 @@
smp_mb();
error = check_conflicting_open(dentry, arg);
if (error)
- locks_unlink_lock(flp);
+ locks_unlink_lock(before);
out:
if (is_deleg)
mutex_unlock(&inode->i_mutex);
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index d0fec26..24c6898 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -129,7 +129,10 @@
.rpc_argp = &args,
.rpc_resp = &fattr,
};
- int status;
+ int status = 0;
+
+ if (acl == NULL && (!S_ISDIR(inode->i_mode) || dfacl == NULL))
+ goto out;
status = -EOPNOTSUPP;
if (!nfs_server_capable(inode, NFS_CAP_ACLS))
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 75ae8d2..7dd8aca 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2560,6 +2560,7 @@
struct nfs4_closedata *calldata = data;
struct nfs4_state *state = calldata->state;
struct nfs_server *server = NFS_SERVER(calldata->inode);
+ nfs4_stateid *res_stateid = NULL;
dprintk("%s: begin!\n", __func__);
if (!nfs4_sequence_done(task, &calldata->res.seq_res))
@@ -2570,12 +2571,12 @@
*/
switch (task->tk_status) {
case 0:
- if (calldata->roc)
+ res_stateid = &calldata->res.stateid;
+ if (calldata->arg.fmode == 0 && calldata->roc)
pnfs_roc_set_barrier(state->inode,
calldata->roc_barrier);
- nfs_clear_open_stateid(state, &calldata->res.stateid, 0);
renew_lease(server, calldata->timestamp);
- goto out_release;
+ break;
case -NFS4ERR_ADMIN_REVOKED:
case -NFS4ERR_STALE_STATEID:
case -NFS4ERR_OLD_STATEID:
@@ -2589,7 +2590,7 @@
goto out_release;
}
}
- nfs_clear_open_stateid(state, NULL, calldata->arg.fmode);
+ nfs_clear_open_stateid(state, res_stateid, calldata->arg.fmode);
out_release:
nfs_release_seqid(calldata->arg.seqid);
nfs_refresh_inode(calldata->inode, calldata->res.fattr);
@@ -2601,6 +2602,7 @@
struct nfs4_closedata *calldata = data;
struct nfs4_state *state = calldata->state;
struct inode *inode = calldata->inode;
+ bool is_rdonly, is_wronly, is_rdwr;
int call_close = 0;
dprintk("%s: begin!\n", __func__);
@@ -2608,18 +2610,24 @@
goto out_wait;
task->tk_msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_DOWNGRADE];
- calldata->arg.fmode = FMODE_READ|FMODE_WRITE;
spin_lock(&state->owner->so_lock);
+ is_rdwr = test_bit(NFS_O_RDWR_STATE, &state->flags);
+ is_rdonly = test_bit(NFS_O_RDONLY_STATE, &state->flags);
+ is_wronly = test_bit(NFS_O_WRONLY_STATE, &state->flags);
+ /* Calculate the current open share mode */
+ calldata->arg.fmode = 0;
+ if (is_rdonly || is_rdwr)
+ calldata->arg.fmode |= FMODE_READ;
+ if (is_wronly || is_rdwr)
+ calldata->arg.fmode |= FMODE_WRITE;
/* Calculate the change in open mode */
if (state->n_rdwr == 0) {
if (state->n_rdonly == 0) {
- call_close |= test_bit(NFS_O_RDONLY_STATE, &state->flags);
- call_close |= test_bit(NFS_O_RDWR_STATE, &state->flags);
+ call_close |= is_rdonly || is_rdwr;
calldata->arg.fmode &= ~FMODE_READ;
}
if (state->n_wronly == 0) {
- call_close |= test_bit(NFS_O_WRONLY_STATE, &state->flags);
- call_close |= test_bit(NFS_O_RDWR_STATE, &state->flags);
+ call_close |= is_wronly || is_rdwr;
calldata->arg.fmode &= ~FMODE_WRITE;
}
}
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index ba49192..be7cbce 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -116,7 +116,7 @@
if (atomic_read(&c->io_count) == 0)
break;
ret = nfs_wait_bit_killable(&q.key);
- } while (atomic_read(&c->io_count) != 0);
+ } while (atomic_read(&c->io_count) != 0 && !ret);
finish_wait(wq, &q.wait);
return ret;
}
@@ -139,26 +139,49 @@
/*
* nfs_page_group_lock - lock the head of the page group
* @req - request in group that is to be locked
+ * @nonblock - if true don't block waiting for lock
*
* this lock must be held if modifying the page group list
*
- * returns result from wait_on_bit_lock: 0 on success, < 0 on error
+ * return 0 on success, < 0 on error: -EDELAY if nonblocking or the
+ * result from wait_on_bit_lock
+ *
+ * NOTE: calling with nonblock=false should always have set the
+ * lock bit (see fs/buffer.c and other uses of wait_on_bit_lock
+ * with TASK_UNINTERRUPTIBLE), so there is no need to check the result.
*/
int
-nfs_page_group_lock(struct nfs_page *req, bool wait)
+nfs_page_group_lock(struct nfs_page *req, bool nonblock)
{
struct nfs_page *head = req->wb_head;
- int ret;
WARN_ON_ONCE(head != head->wb_head);
- do {
- ret = wait_on_bit_lock(&head->wb_flags, PG_HEADLOCK,
- TASK_UNINTERRUPTIBLE);
- } while (wait && ret != 0);
+ if (!test_and_set_bit(PG_HEADLOCK, &head->wb_flags))
+ return 0;
- WARN_ON_ONCE(ret > 0);
- return ret;
+ if (!nonblock)
+ return wait_on_bit_lock(&head->wb_flags, PG_HEADLOCK,
+ TASK_UNINTERRUPTIBLE);
+
+ return -EAGAIN;
+}
+
+/*
+ * nfs_page_group_lock_wait - wait for the lock to clear, but don't grab it
+ * @req - a request in the group
+ *
+ * This is a blocking call to wait for the group lock to be cleared.
+ */
+void
+nfs_page_group_lock_wait(struct nfs_page *req)
+{
+ struct nfs_page *head = req->wb_head;
+
+ WARN_ON_ONCE(head != head->wb_head);
+
+ wait_on_bit(&head->wb_flags, PG_HEADLOCK,
+ TASK_UNINTERRUPTIBLE);
}
/*
@@ -219,7 +242,7 @@
{
bool ret;
- nfs_page_group_lock(req, true);
+ nfs_page_group_lock(req, false);
ret = nfs_page_group_sync_on_bit_locked(req, bit);
nfs_page_group_unlock(req);
@@ -701,10 +724,11 @@
struct nfs_pgio_header *hdr)
{
struct nfs_page *req;
- struct page **pages;
+ struct page **pages,
+ *last_page;
struct list_head *head = &desc->pg_list;
struct nfs_commit_info cinfo;
- unsigned int pagecount;
+ unsigned int pagecount, pageused;
pagecount = nfs_page_array_len(desc->pg_base, desc->pg_count);
if (!nfs_pgarray_set(&hdr->page_array, pagecount))
@@ -712,12 +736,23 @@
nfs_init_cinfo(&cinfo, desc->pg_inode, desc->pg_dreq);
pages = hdr->page_array.pagevec;
+ last_page = NULL;
+ pageused = 0;
while (!list_empty(head)) {
req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
nfs_list_add_request(req, &hdr->pages);
- *pages++ = req->wb_page;
+
+ if (WARN_ON_ONCE(pageused >= pagecount))
+ return nfs_pgio_error(desc, hdr);
+
+ if (!last_page || last_page != req->wb_page) {
+ *pages++ = last_page = req->wb_page;
+ pageused++;
+ }
}
+ if (WARN_ON_ONCE(pageused != pagecount))
+ return nfs_pgio_error(desc, hdr);
if ((desc->pg_ioflags & FLUSH_COND_STABLE) &&
(desc->pg_moreio || nfs_reqs_to_commit(&cinfo)))
@@ -788,6 +823,14 @@
return false;
if (req_offset(req) != req_offset(prev) + prev->wb_bytes)
return false;
+ if (req->wb_page == prev->wb_page) {
+ if (req->wb_pgbase != prev->wb_pgbase + prev->wb_bytes)
+ return false;
+ } else {
+ if (req->wb_pgbase != 0 ||
+ prev->wb_pgbase + prev->wb_bytes != PAGE_CACHE_SIZE)
+ return false;
+ }
}
size = pgio->pg_ops->pg_test(pgio, prev, req);
WARN_ON_ONCE(size > req->wb_bytes);
@@ -858,13 +901,8 @@
struct nfs_page *subreq;
unsigned int bytes_left = 0;
unsigned int offset, pgbase;
- int ret;
- ret = nfs_page_group_lock(req, false);
- if (ret < 0) {
- desc->pg_error = ret;
- return 0;
- }
+ nfs_page_group_lock(req, false);
subreq = req;
bytes_left = subreq->wb_bytes;
@@ -886,11 +924,7 @@
if (desc->pg_recoalesce)
return 0;
/* retry add_request for this subreq */
- ret = nfs_page_group_lock(req, false);
- if (ret < 0) {
- desc->pg_error = ret;
- return 0;
- }
+ nfs_page_group_lock(req, false);
continue;
}
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index e3b5cf2..175d5d0 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -241,7 +241,7 @@
unsigned int pos = 0;
unsigned int len = nfs_page_length(req->wb_page);
- nfs_page_group_lock(req, true);
+ nfs_page_group_lock(req, false);
do {
tmp = nfs_page_group_search_locked(req->wb_head, pos);
@@ -478,10 +478,23 @@
return NULL;
}
- /* lock each request in the page group */
- ret = nfs_page_group_lock(head, false);
- if (ret < 0)
+ /* holding inode lock, so always make a non-blocking call to try the
+ * page group lock */
+ ret = nfs_page_group_lock(head, true);
+ if (ret < 0) {
+ spin_unlock(&inode->i_lock);
+
+ if (!nonblock && ret == -EAGAIN) {
+ nfs_page_group_lock_wait(head);
+ nfs_release_request(head);
+ goto try_again;
+ }
+
+ nfs_release_request(head);
return ERR_PTR(ret);
+ }
+
+ /* lock each request in the page group */
subreq = head;
do {
/*
diff --git a/fs/ocfs2/cluster/quorum.c b/fs/ocfs2/cluster/quorum.c
index 1ec141e..62e8ec6 100644
--- a/fs/ocfs2/cluster/quorum.c
+++ b/fs/ocfs2/cluster/quorum.c
@@ -160,9 +160,18 @@
}
out:
- spin_unlock(&qs->qs_lock);
- if (fence)
+ if (fence) {
+ spin_unlock(&qs->qs_lock);
o2quo_fence_self();
+ } else {
+ mlog(ML_NOTICE, "not fencing this node, heartbeating: %d, "
+ "connected: %d, lowest: %d (%sreachable)\n",
+ qs->qs_heartbeating, qs->qs_connected, lowest_hb,
+ lowest_reachable ? "" : "un");
+ spin_unlock(&qs->qs_lock);
+
+ }
+
}
static void o2quo_set_hold(struct o2quo_state *qs, u8 node)
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 681691b..ea34952 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -1480,6 +1480,14 @@
return ret;
}
+static int o2net_set_usertimeout(struct socket *sock)
+{
+ int user_timeout = O2NET_TCP_USER_TIMEOUT;
+
+ return kernel_setsockopt(sock, SOL_TCP, TCP_USER_TIMEOUT,
+ (char *)&user_timeout, sizeof(user_timeout));
+}
+
static void o2net_initialize_handshake(void)
{
o2net_hand->o2hb_heartbeat_timeout_ms = cpu_to_be32(
@@ -1536,16 +1544,20 @@
#endif
printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been "
- "idle for %lu.%lu secs, shutting it down.\n", SC_NODEF_ARGS(sc),
- msecs / 1000, msecs % 1000);
+ "idle for %lu.%lu secs.\n",
+ SC_NODEF_ARGS(sc), msecs / 1000, msecs % 1000);
- /*
- * Initialize the nn_timeout so that the next connection attempt
- * will continue in o2net_start_connect.
+ /* idle timerout happen, don't shutdown the connection, but
+ * make fence decision. Maybe the connection can recover before
+ * the decision is made.
*/
atomic_set(&nn->nn_timeout, 1);
+ o2quo_conn_err(o2net_num_from_nn(nn));
+ queue_delayed_work(o2net_wq, &nn->nn_still_up,
+ msecs_to_jiffies(O2NET_QUORUM_DELAY_MS));
- o2net_sc_queue_work(sc, &sc->sc_shutdown_work);
+ o2net_sc_reset_idle_timer(sc);
+
}
static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc)
@@ -1560,6 +1572,15 @@
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc)
{
+ struct o2net_node *nn = o2net_nn_from_num(sc->sc_node->nd_num);
+
+ /* clear fence decision since the connection recover from timeout*/
+ if (atomic_read(&nn->nn_timeout)) {
+ o2quo_conn_up(o2net_num_from_nn(nn));
+ cancel_delayed_work(&nn->nn_still_up);
+ atomic_set(&nn->nn_timeout, 0);
+ }
+
/* Only push out an existing timer */
if (timer_pending(&sc->sc_idle_timeout))
o2net_sc_reset_idle_timer(sc);
@@ -1650,6 +1671,12 @@
goto out;
}
+ ret = o2net_set_usertimeout(sock);
+ if (ret) {
+ mlog(ML_ERROR, "set TCP_USER_TIMEOUT failed with %d\n", ret);
+ goto out;
+ }
+
o2net_register_callbacks(sc->sc_sock->sk, sc);
spin_lock(&nn->nn_lock);
@@ -1831,6 +1858,12 @@
goto out;
}
+ ret = o2net_set_usertimeout(new_sock);
+ if (ret) {
+ mlog(ML_ERROR, "set TCP_USER_TIMEOUT failed with %d\n", ret);
+ goto out;
+ }
+
slen = sizeof(sin);
ret = new_sock->ops->getname(new_sock, (struct sockaddr *) &sin,
&slen, 1);
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index 5bada2a..c571e84 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -63,6 +63,7 @@
#define O2NET_KEEPALIVE_DELAY_MS_DEFAULT 2000
#define O2NET_IDLE_TIMEOUT_MS_DEFAULT 30000
+#define O2NET_TCP_USER_TIMEOUT 0x7fffffff
/* TODO: figure this out.... */
static inline int o2net_link_down(int err, struct socket *sock)
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index 6f66b37..53e6c40 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -35,9 +35,8 @@
copy_to_user((typeof(a) __user *)b, &(a), sizeof(a))
/*
- * This call is void because we are already reporting an error that may
- * be -EFAULT. The error will be returned from the ioctl(2) call. It's
- * just a best-effort to tell userspace that this request caused the error.
+ * This is just a best-effort to tell userspace that this request
+ * caused the error.
*/
static inline void o2info_set_request_error(struct ocfs2_info_request *kreq,
struct ocfs2_info_request __user *req)
@@ -146,136 +145,105 @@
static int ocfs2_info_handle_blocksize(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_blocksize oib;
if (o2info_from_user(oib, req))
- goto bail;
+ return -EFAULT;
oib.ib_blocksize = inode->i_sb->s_blocksize;
o2info_set_request_filled(&oib.ib_req);
if (o2info_to_user(oib, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oib.ib_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_handle_clustersize(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_clustersize oic;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
if (o2info_from_user(oic, req))
- goto bail;
+ return -EFAULT;
oic.ic_clustersize = osb->s_clustersize;
o2info_set_request_filled(&oic.ic_req);
if (o2info_to_user(oic, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oic.ic_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_handle_maxslots(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_maxslots oim;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
if (o2info_from_user(oim, req))
- goto bail;
+ return -EFAULT;
oim.im_max_slots = osb->max_slots;
o2info_set_request_filled(&oim.im_req);
if (o2info_to_user(oim, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oim.im_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_handle_label(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_label oil;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
if (o2info_from_user(oil, req))
- goto bail;
+ return -EFAULT;
memcpy(oil.il_label, osb->vol_label, OCFS2_MAX_VOL_LABEL_LEN);
o2info_set_request_filled(&oil.il_req);
if (o2info_to_user(oil, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oil.il_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_handle_uuid(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_uuid oiu;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
if (o2info_from_user(oiu, req))
- goto bail;
+ return -EFAULT;
memcpy(oiu.iu_uuid_str, osb->uuid_str, OCFS2_TEXT_UUID_LEN + 1);
o2info_set_request_filled(&oiu.iu_req);
if (o2info_to_user(oiu, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oiu.iu_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_handle_fs_features(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_fs_features oif;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
if (o2info_from_user(oif, req))
- goto bail;
+ return -EFAULT;
oif.if_compat_features = osb->s_feature_compat;
oif.if_incompat_features = osb->s_feature_incompat;
@@ -284,39 +252,28 @@
o2info_set_request_filled(&oif.if_req);
if (o2info_to_user(oif, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oif.if_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_handle_journal_size(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_journal_size oij;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
if (o2info_from_user(oij, req))
- goto bail;
+ return -EFAULT;
oij.ij_journal_size = i_size_read(osb->journal->j_inode);
o2info_set_request_filled(&oij.ij_req);
if (o2info_to_user(oij, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oij.ij_req, req);
-
- return status;
+ return 0;
}
static int ocfs2_info_scan_inode_alloc(struct ocfs2_super *osb,
@@ -373,7 +330,7 @@
u32 i;
u64 blkno = -1;
char namebuf[40];
- int status = -EFAULT, type = INODE_ALLOC_SYSTEM_INODE;
+ int status, type = INODE_ALLOC_SYSTEM_INODE;
struct ocfs2_info_freeinode *oifi = NULL;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct inode *inode_alloc = NULL;
@@ -385,8 +342,10 @@
goto out_err;
}
- if (o2info_from_user(*oifi, req))
- goto bail;
+ if (o2info_from_user(*oifi, req)) {
+ status = -EFAULT;
+ goto out_free;
+ }
oifi->ifi_slotnum = osb->max_slots;
@@ -424,14 +383,16 @@
o2info_set_request_filled(&oifi->ifi_req);
- if (o2info_to_user(*oifi, req))
- goto bail;
+ if (o2info_to_user(*oifi, req)) {
+ status = -EFAULT;
+ goto out_free;
+ }
status = 0;
bail:
if (status)
o2info_set_request_error(&oifi->ifi_req, req);
-
+out_free:
kfree(oifi);
out_err:
return status;
@@ -658,7 +619,7 @@
{
u64 blkno = -1;
char namebuf[40];
- int status = -EFAULT, type = GLOBAL_BITMAP_SYSTEM_INODE;
+ int status, type = GLOBAL_BITMAP_SYSTEM_INODE;
struct ocfs2_info_freefrag *oiff;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
@@ -671,8 +632,10 @@
goto out_err;
}
- if (o2info_from_user(*oiff, req))
- goto bail;
+ if (o2info_from_user(*oiff, req)) {
+ status = -EFAULT;
+ goto out_free;
+ }
/*
* chunksize from userspace should be power of 2.
*/
@@ -711,14 +674,14 @@
if (o2info_to_user(*oiff, req)) {
status = -EFAULT;
- goto bail;
+ goto out_free;
}
status = 0;
bail:
if (status)
o2info_set_request_error(&oiff->iff_req, req);
-
+out_free:
kfree(oiff);
out_err:
return status;
@@ -727,23 +690,17 @@
static int ocfs2_info_handle_unknown(struct inode *inode,
struct ocfs2_info_request __user *req)
{
- int status = -EFAULT;
struct ocfs2_info_request oir;
if (o2info_from_user(oir, req))
- goto bail;
+ return -EFAULT;
o2info_clear_request_filled(&oir);
if (o2info_to_user(oir, req))
- goto bail;
+ return -EFAULT;
- status = 0;
-bail:
- if (status)
- o2info_set_request_error(&oir, req);
-
- return status;
+ return 0;
}
/*
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 9737cba..83a0600 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -1014,7 +1014,7 @@
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi)
- goto out_no_entry;
+ goto out_fail;
cfi.icb.extLength = cpu_to_le32(sb->s_blocksize);
cfi.icb.extLocation = cpu_to_lelb(iinfo->i_location);
if (UDF_SB(inode->i_sb)->s_lvid_bh) {
@@ -1036,6 +1036,7 @@
out_no_entry:
up_write(&iinfo->i_data_sem);
+out_fail:
inode_dec_link_count(inode);
iput(inode);
goto out;
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 6dfd64b..e973540 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -17,6 +17,7 @@
{0x1002, 0x1315, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x1316, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x1317, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x1318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x131B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x131C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x131D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_KAVERI|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
@@ -164,8 +165,11 @@
{0x1002, 0x6601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6602, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6603, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6604, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6605, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6606, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6607, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6608, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6610, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6611, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6613, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
@@ -175,6 +179,8 @@
{0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6640, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6641, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BONAIRE|RADEON_NEW_MEMMAP}, \
@@ -297,6 +303,7 @@
{0x1002, 0x6829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x682A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x682B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x682C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
{0x1002, 0x682D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x682F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6830, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 654151e..ddaef86 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -128,7 +128,7 @@
#define IMX6Q_CLK_ECSPI5 116
#define IMX6DL_CLK_I2C4 116
#define IMX6QDL_CLK_ENET 117
-#define IMX6QDL_CLK_ESAI 118
+#define IMX6QDL_CLK_ESAI_EXTAL 118
#define IMX6QDL_CLK_GPT_IPG 119
#define IMX6QDL_CLK_GPT_IPG_PER 120
#define IMX6QDL_CLK_GPU2D_CORE 121
@@ -218,7 +218,36 @@
#define IMX6QDL_CLK_LVDS2_SEL 205
#define IMX6QDL_CLK_LVDS1_GATE 206
#define IMX6QDL_CLK_LVDS2_GATE 207
-#define IMX6QDL_CLK_ESAI_AHB 208
-#define IMX6QDL_CLK_END 209
+#define IMX6QDL_CLK_ESAI_IPG 208
+#define IMX6QDL_CLK_ESAI_MEM 209
+#define IMX6QDL_CLK_ASRC_IPG 210
+#define IMX6QDL_CLK_ASRC_MEM 211
+#define IMX6QDL_CLK_LVDS1_IN 212
+#define IMX6QDL_CLK_LVDS2_IN 213
+#define IMX6QDL_CLK_ANACLK1 214
+#define IMX6QDL_CLK_ANACLK2 215
+#define IMX6QDL_PLL1_BYPASS_SRC 216
+#define IMX6QDL_PLL2_BYPASS_SRC 217
+#define IMX6QDL_PLL3_BYPASS_SRC 218
+#define IMX6QDL_PLL4_BYPASS_SRC 219
+#define IMX6QDL_PLL5_BYPASS_SRC 220
+#define IMX6QDL_PLL6_BYPASS_SRC 221
+#define IMX6QDL_PLL7_BYPASS_SRC 222
+#define IMX6QDL_CLK_PLL1 223
+#define IMX6QDL_CLK_PLL2 224
+#define IMX6QDL_CLK_PLL3 225
+#define IMX6QDL_CLK_PLL4 226
+#define IMX6QDL_CLK_PLL5 227
+#define IMX6QDL_CLK_PLL6 228
+#define IMX6QDL_CLK_PLL7 229
+#define IMX6QDL_PLL1_BYPASS 230
+#define IMX6QDL_PLL2_BYPASS 231
+#define IMX6QDL_PLL3_BYPASS 232
+#define IMX6QDL_PLL4_BYPASS 233
+#define IMX6QDL_PLL5_BYPASS 234
+#define IMX6QDL_PLL6_BYPASS 235
+#define IMX6QDL_PLL7_BYPASS 236
+#define IMX6QDL_CLK_GPT_3M 237
+#define IMX6QDL_CLK_END 238
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h
index b91dd46..9ce4e42 100644
--- a/include/dt-bindings/clock/imx6sl-clock.h
+++ b/include/dt-bindings/clock/imx6sl-clock.h
@@ -146,6 +146,34 @@
#define IMX6SL_CLK_PLL4_AUDIO_DIV 133
#define IMX6SL_CLK_SPBA 134
#define IMX6SL_CLK_ENET 135
-#define IMX6SL_CLK_END 136
+#define IMX6SL_CLK_LVDS1_SEL 136
+#define IMX6SL_CLK_LVDS1_OUT 137
+#define IMX6SL_CLK_LVDS1_IN 138
+#define IMX6SL_CLK_ANACLK1 139
+#define IMX6SL_PLL1_BYPASS_SRC 140
+#define IMX6SL_PLL2_BYPASS_SRC 141
+#define IMX6SL_PLL3_BYPASS_SRC 142
+#define IMX6SL_PLL4_BYPASS_SRC 143
+#define IMX6SL_PLL5_BYPASS_SRC 144
+#define IMX6SL_PLL6_BYPASS_SRC 145
+#define IMX6SL_PLL7_BYPASS_SRC 146
+#define IMX6SL_CLK_PLL1 147
+#define IMX6SL_CLK_PLL2 148
+#define IMX6SL_CLK_PLL3 149
+#define IMX6SL_CLK_PLL4 150
+#define IMX6SL_CLK_PLL5 151
+#define IMX6SL_CLK_PLL6 152
+#define IMX6SL_CLK_PLL7 153
+#define IMX6SL_PLL1_BYPASS 154
+#define IMX6SL_PLL2_BYPASS 155
+#define IMX6SL_PLL3_BYPASS 156
+#define IMX6SL_PLL4_BYPASS 157
+#define IMX6SL_PLL5_BYPASS 158
+#define IMX6SL_PLL6_BYPASS 159
+#define IMX6SL_PLL7_BYPASS 160
+#define IMX6SL_CLK_SSI1_IPG 161
+#define IMX6SL_CLK_SSI2_IPG 162
+#define IMX6SL_CLK_SSI3_IPG 163
+#define IMX6SL_CLK_END 164
#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
diff --git a/include/dt-bindings/clock/imx6sx-clock.h b/include/dt-bindings/clock/imx6sx-clock.h
index 421d8bb..9957091 100644
--- a/include/dt-bindings/clock/imx6sx-clock.h
+++ b/include/dt-bindings/clock/imx6sx-clock.h
@@ -251,6 +251,29 @@
#define IMX6SX_CLK_SAI2_IPG 238
#define IMX6SX_CLK_ESAI_IPG 239
#define IMX6SX_CLK_ESAI_MEM 240
-#define IMX6SX_CLK_CLK_END 241
+#define IMX6SX_CLK_LVDS1_IN 241
+#define IMX6SX_CLK_ANACLK1 242
+#define IMX6SX_PLL1_BYPASS_SRC 243
+#define IMX6SX_PLL2_BYPASS_SRC 244
+#define IMX6SX_PLL3_BYPASS_SRC 245
+#define IMX6SX_PLL4_BYPASS_SRC 246
+#define IMX6SX_PLL5_BYPASS_SRC 247
+#define IMX6SX_PLL6_BYPASS_SRC 248
+#define IMX6SX_PLL7_BYPASS_SRC 249
+#define IMX6SX_CLK_PLL1 250
+#define IMX6SX_CLK_PLL2 251
+#define IMX6SX_CLK_PLL3 252
+#define IMX6SX_CLK_PLL4 253
+#define IMX6SX_CLK_PLL5 254
+#define IMX6SX_CLK_PLL6 255
+#define IMX6SX_CLK_PLL7 256
+#define IMX6SX_PLL1_BYPASS 257
+#define IMX6SX_PLL2_BYPASS 258
+#define IMX6SX_PLL3_BYPASS 259
+#define IMX6SX_PLL4_BYPASS 260
+#define IMX6SX_PLL5_BYPASS 261
+#define IMX6SX_PLL6_BYPASS 262
+#define IMX6SX_PLL7_BYPASS 263
+#define IMX6SX_CLK_CLK_END 264
#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
diff --git a/include/dt-bindings/clock/r8a7740-clock.h b/include/dt-bindings/clock/r8a7740-clock.h
new file mode 100644
index 0000000..f6b4b0f
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7740-clock.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7740_H__
+#define __DT_BINDINGS_CLOCK_R8A7740_H__
+
+/* CPG */
+#define R8A7740_CLK_SYSTEM 0
+#define R8A7740_CLK_PLLC0 1
+#define R8A7740_CLK_PLLC1 2
+#define R8A7740_CLK_PLLC2 3
+#define R8A7740_CLK_R 4
+#define R8A7740_CLK_USB24S 5
+#define R8A7740_CLK_I 6
+#define R8A7740_CLK_ZG 7
+#define R8A7740_CLK_B 8
+#define R8A7740_CLK_M1 9
+#define R8A7740_CLK_HP 10
+#define R8A7740_CLK_HPP 11
+#define R8A7740_CLK_USBP 12
+#define R8A7740_CLK_S 13
+#define R8A7740_CLK_ZB 14
+#define R8A7740_CLK_M3 15
+#define R8A7740_CLK_CP 16
+
+/* MSTP1 */
+#define R8A7740_CLK_CEU21 28
+#define R8A7740_CLK_CEU20 27
+#define R8A7740_CLK_TMU0 25
+#define R8A7740_CLK_LCDC1 17
+#define R8A7740_CLK_IIC0 16
+#define R8A7740_CLK_TMU1 11
+#define R8A7740_CLK_LCDC0 0
+
+/* MSTP2 */
+#define R8A7740_CLK_SCIFA6 30
+#define R8A7740_CLK_SCIFA7 22
+#define R8A7740_CLK_DMAC1 18
+#define R8A7740_CLK_DMAC2 17
+#define R8A7740_CLK_DMAC3 16
+#define R8A7740_CLK_USBDMAC 14
+#define R8A7740_CLK_SCIFA5 7
+#define R8A7740_CLK_SCIFB 6
+#define R8A7740_CLK_SCIFA0 4
+#define R8A7740_CLK_SCIFA1 3
+#define R8A7740_CLK_SCIFA2 2
+#define R8A7740_CLK_SCIFA3 1
+#define R8A7740_CLK_SCIFA4 0
+
+/* MSTP3 */
+#define R8A7740_CLK_CMT1 29
+#define R8A7740_CLK_FSI 28
+#define R8A7740_CLK_IIC1 23
+#define R8A7740_CLK_USBF 20
+#define R8A7740_CLK_SDHI0 14
+#define R8A7740_CLK_SDHI1 13
+#define R8A7740_CLK_MMC 12
+#define R8A7740_CLK_GETHER 9
+#define R8A7740_CLK_TPU0 4
+
+/* MSTP4 */
+#define R8A7740_CLK_USBH 16
+#define R8A7740_CLK_SDHI2 15
+#define R8A7740_CLK_USBFUNC 7
+#define R8A7740_CLK_USBPHY 6
+
+/* SUBCK* */
+#define R8A7740_CLK_SUBCK 9
+#define R8A7740_CLK_SUBCK2 10
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7740_H__ */
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index 00953d9..d6b56b2 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -166,6 +166,9 @@
#define VF610_CLK_DMAMUX3 153
#define VF610_CLK_FLEXCAN0_EN 154
#define VF610_CLK_FLEXCAN1_EN 155
-#define VF610_CLK_END 156
+#define VF610_CLK_PLL7_MAIN 156
+#define VF610_CLK_USBPHY0 157
+#define VF610_CLK_USBPHY1 158
+#define VF610_CLK_END 159
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index eb726b9..a1e31f2 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -127,10 +127,9 @@
BLK_MQ_RQ_QUEUE_ERROR = 2, /* end IO with error */
BLK_MQ_F_SHOULD_MERGE = 1 << 0,
- BLK_MQ_F_SHOULD_SORT = 1 << 1,
- BLK_MQ_F_TAG_SHARED = 1 << 2,
- BLK_MQ_F_SG_MERGE = 1 << 3,
- BLK_MQ_F_SYSFS_UP = 1 << 4,
+ BLK_MQ_F_TAG_SHARED = 1 << 1,
+ BLK_MQ_F_SG_MERGE = 1 << 2,
+ BLK_MQ_F_SYSFS_UP = 1 << 3,
BLK_MQ_S_STOPPED = 0,
BLK_MQ_S_TAG_ACTIVE = 1,
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 6f76277..61219b9 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -16,7 +16,6 @@
#define PHY_ID_BCM7366 0x600d8490
#define PHY_ID_BCM7439 0x600d8480
#define PHY_ID_BCM7445 0x600d8510
-#define PHY_ID_BCM7XXX_28 0x600d8400
#define PHY_BCM_OUI_MASK 0xfffffc00
#define PHY_BCM_OUI_1 0x00206000
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 6bb5e3f..f0b0edb 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -102,6 +102,15 @@
FTRACE_OPS_FL_DELETED = 1 << 8,
};
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* The hash used to know what functions callbacks trace */
+struct ftrace_ops_hash {
+ struct ftrace_hash *notrace_hash;
+ struct ftrace_hash *filter_hash;
+ struct mutex regex_lock;
+};
+#endif
+
/*
* Note, ftrace_ops can be referenced outside of RCU protection.
* (Although, for perf, the control ops prevent that). If ftrace_ops is
@@ -121,10 +130,9 @@
int __percpu *disabled;
#ifdef CONFIG_DYNAMIC_FTRACE
int nr_trampolines;
- struct ftrace_hash *notrace_hash;
- struct ftrace_hash *filter_hash;
+ struct ftrace_ops_hash local_hash;
+ struct ftrace_ops_hash *func_hash;
struct ftrace_hash *tramp_hash;
- struct mutex regex_lock;
unsigned long trampoline;
#endif
};
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index b7ce0c6..c7e17de 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -16,8 +16,6 @@
*/
struct gpio_desc;
-#ifdef CONFIG_GPIOLIB
-
#define GPIOD_FLAGS_BIT_DIR_SET BIT(0)
#define GPIOD_FLAGS_BIT_DIR_OUT BIT(1)
#define GPIOD_FLAGS_BIT_DIR_VAL BIT(2)
@@ -34,6 +32,8 @@
GPIOD_FLAGS_BIT_DIR_VAL,
};
+#ifdef CONFIG_GPIOLIB
+
/* Acquire and dispose GPIOs */
struct gpio_desc *__must_check __gpiod_get(struct device *dev,
const char *con_id,
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index ea50766..a95efeb 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -577,16 +577,20 @@
}
#endif /* CONFIG_OF */
-#ifdef CONFIG_I2C_ACPI
-int acpi_i2c_install_space_handler(struct i2c_adapter *adapter);
-void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter);
+#ifdef CONFIG_ACPI
void acpi_i2c_register_devices(struct i2c_adapter *adap);
#else
static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+int acpi_i2c_install_space_handler(struct i2c_adapter *adapter);
+void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter);
+#else
static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
{ }
static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
{ return 0; }
-#endif
+#endif /* CONFIG_ACPI_I2C_OPREGION */
#endif /* _LINUX_I2C_H */
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index d5b50a1..0dae71e 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -159,7 +159,11 @@
* journal_block_tag (in the descriptor). The other h_chksum* fields are
* not used.
*
- * Checksum v1 and v2 are mutually exclusive features.
+ * If FEATURE_INCOMPAT_CSUM_V3 is set, the descriptor block uses
+ * journal_block_tag3_t to store a full 32-bit checksum. Everything else
+ * is the same as v2.
+ *
+ * Checksum v1, v2, and v3 are mutually exclusive features.
*/
struct commit_header {
__be32 h_magic;
@@ -179,6 +183,14 @@
* raw struct shouldn't be used for pointer math or sizeof() - use
* journal_tag_bytes(journal) instead to compute this.
*/
+typedef struct journal_block_tag3_s
+{
+ __be32 t_blocknr; /* The on-disk block number */
+ __be32 t_flags; /* See below */
+ __be32 t_blocknr_high; /* most-significant high 32bits. */
+ __be32 t_checksum; /* crc32c(uuid+seq+block) */
+} journal_block_tag3_t;
+
typedef struct journal_block_tag_s
{
__be32 t_blocknr; /* The on-disk block number */
@@ -187,9 +199,6 @@
__be32 t_blocknr_high; /* most-significant high 32bits. */
} journal_block_tag_t;
-#define JBD2_TAG_SIZE32 (offsetof(journal_block_tag_t, t_blocknr_high))
-#define JBD2_TAG_SIZE64 (sizeof(journal_block_tag_t))
-
/* Tail of descriptor block, for checksumming */
struct jbd2_journal_block_tail {
__be32 t_checksum; /* crc32c(uuid+descr_block) */
@@ -284,6 +293,7 @@
#define JBD2_FEATURE_INCOMPAT_64BIT 0x00000002
#define JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT 0x00000004
#define JBD2_FEATURE_INCOMPAT_CSUM_V2 0x00000008
+#define JBD2_FEATURE_INCOMPAT_CSUM_V3 0x00000010
/* Features known to this kernel version: */
#define JBD2_KNOWN_COMPAT_FEATURES JBD2_FEATURE_COMPAT_CHECKSUM
@@ -291,7 +301,8 @@
#define JBD2_KNOWN_INCOMPAT_FEATURES (JBD2_FEATURE_INCOMPAT_REVOKE | \
JBD2_FEATURE_INCOMPAT_64BIT | \
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT | \
- JBD2_FEATURE_INCOMPAT_CSUM_V2)
+ JBD2_FEATURE_INCOMPAT_CSUM_V2 | \
+ JBD2_FEATURE_INCOMPAT_CSUM_V3)
#ifdef __KERNEL__
@@ -1296,6 +1307,15 @@
extern int jbd2_journal_blocks_per_page(struct inode *inode);
extern size_t journal_tag_bytes(journal_t *journal);
+static inline int jbd2_journal_has_csum_v2or3(journal_t *journal)
+{
+ if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) ||
+ JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3))
+ return 1;
+
+ return 0;
+}
+
/*
* We reserve t_outstanding_credits >> JBD2_CONTROL_BLOCKS_SHIFT for
* transaction control blocks.
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index 6ad2bbc..6c3e06e 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -123,6 +123,7 @@
extern void nfs_unlock_request(struct nfs_page *req);
extern void nfs_unlock_and_release_request(struct nfs_page *);
extern int nfs_page_group_lock(struct nfs_page *, bool);
+extern void nfs_page_group_lock_wait(struct nfs_page *);
extern void nfs_page_group_unlock(struct nfs_page *);
extern bool nfs_page_group_sync_on_bit(struct nfs_page *, unsigned int);
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 660c029..16ec262 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -21,8 +21,17 @@
};
enum omap_ecc {
- /* 1-bit ECC calculation by GPMC, Error detection by Software */
- OMAP_ECC_HAM1_CODE_HW = 0,
+ /*
+ * 1-bit ECC: calculation and correction by SW
+ * ECC stored at end of spare area
+ */
+ OMAP_ECC_HAM1_CODE_SW = 0,
+
+ /*
+ * 1-bit ECC: calculation by GPMC, Error detection by Software
+ * ECC layout compatible with ROM code layout
+ */
+ OMAP_ECC_HAM1_CODE_HW,
/* 4-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
/* 4-bit ECC calculation by GPMC, Error detection by ELM */
diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h
index 3d6003d..a1ba6a5 100644
--- a/include/linux/seqno-fence.h
+++ b/include/linux/seqno-fence.h
@@ -62,6 +62,7 @@
* @context: the execution context this fence is a part of
* @seqno_ofs: the offset within @sync_buf
* @seqno: the sequence # to signal on
+ * @cond: fence wait condition
* @ops: the fence_ops for operations on this seqno fence
*
* This function initializes a struct seqno_fence with passed parameters,
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index e713543..46d188a 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -253,6 +253,7 @@
* the device whose settings are being modified.
* @transfer: adds a message to the controller's transfer queue.
* @cleanup: frees controller-specific state
+ * @can_dma: determine whether this master supports DMA
* @queued: whether this master is providing an internal message queue
* @kworker: thread struct for message pump
* @kworker_task: pointer to task for message pump kworker thread
@@ -262,6 +263,7 @@
* @cur_msg: the currently in-flight message
* @cur_msg_prepared: spi_prepare_message was called for the currently
* in-flight message
+ * @cur_msg_mapped: message has been mapped for DMA
* @xfer_completion: used by core transfer_one_message()
* @busy: message pump is busy
* @running: message pump is running
@@ -299,6 +301,10 @@
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
* are not GPIOs (driven by the SPI controller itself).
+ * @dma_tx: DMA transmit channel
+ * @dma_rx: DMA receive channel
+ * @dummy_rx: dummy receive buffer for full-duplex devices
+ * @dummy_tx: dummy transmit buffer for full-duplex devices
*
* Each SPI master controller can communicate with one or more @spi_device
* children. These make a small bus, sharing MOSI, MISO and SCK signals
@@ -632,6 +638,7 @@
* addresses for each transfer buffer
* @complete: called to report transaction completions
* @context: the argument to complete() when it's called
+ * @frame_length: the total number of bytes in the message
* @actual_length: the total number of bytes that were transferred in all
* successful segments
* @status: zero for success, else negative errno
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index f1afd60..11d11bc 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -703,9 +703,11 @@
__SYSCALL(__NR_seccomp, sys_seccomp)
#define __NR_getrandom 278
__SYSCALL(__NR_getrandom, sys_getrandom)
+#define __NR_memfd_create 279
+__SYSCALL(__NR_memfd_create, sys_memfd_create)
#undef __NR_syscalls
-#define __NR_syscalls 279
+#define __NR_syscalls 280
/*
* All syscalls below here should go away really,
diff --git a/include/uapi/drm/radeon_drm.h b/include/uapi/drm/radeon_drm.h
index 509b2d7..fea6099 100644
--- a/include/uapi/drm/radeon_drm.h
+++ b/include/uapi/drm/radeon_drm.h
@@ -944,6 +944,7 @@
};
/* drm_radeon_cs_reloc.flags */
+#define RADEON_RELOC_PRIO_MASK (0xf << 0)
struct drm_radeon_cs_reloc {
uint32_t handle;
diff --git a/drivers/staging/usbip/uapi/usbip.h b/include/uapi/linux/usbip.h
similarity index 100%
rename from drivers/staging/usbip/uapi/usbip.h
rename to include/uapi/linux/usbip.h
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
index c38355c..1590c49 100644
--- a/include/uapi/linux/xattr.h
+++ b/include/uapi/linux/xattr.h
@@ -13,7 +13,7 @@
#ifndef _UAPI_LINUX_XATTR_H
#define _UAPI_LINUX_XATTR_H
-#ifdef __UAPI_DEF_XATTR
+#if __UAPI_DEF_XATTR
#define __USE_KERNEL_XATTR_DEFS
#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 1cf24b3..f9c1ed0 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -41,6 +41,7 @@
#include <linux/cgroup.h>
#include <linux/module.h>
#include <linux/mman.h>
+#include <linux/compat.h>
#include "internal.h"
@@ -3717,6 +3718,26 @@
return 0;
}
+#ifdef CONFIG_COMPAT
+static long perf_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (_IOC_NR(cmd)) {
+ case _IOC_NR(PERF_EVENT_IOC_SET_FILTER):
+ case _IOC_NR(PERF_EVENT_IOC_ID):
+ /* Fix up pointer size (usually 4 -> 8 in 32-on-64-bit case */
+ if (_IOC_SIZE(cmd) == sizeof(compat_uptr_t)) {
+ cmd &= ~IOCSIZE_MASK;
+ cmd |= sizeof(void *) << IOCSIZE_SHIFT;
+ }
+ break;
+ }
+ return perf_ioctl(file, cmd, arg);
+}
+#else
+# define perf_compat_ioctl NULL
+#endif
+
int perf_event_task_enable(void)
{
struct perf_event *event;
@@ -4222,7 +4243,7 @@
.read = perf_read,
.poll = perf_poll,
.unlocked_ioctl = perf_ioctl,
- .compat_ioctl = perf_ioctl,
+ .compat_ioctl = perf_compat_ioctl,
.mmap = perf_mmap,
.fasync = perf_fasync,
};
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index a2b28a2..6223fab 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -517,6 +517,7 @@
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
+EXPORT_SYMBOL_GPL(handle_fasteoi_irq);
/**
* handle_edge_irq - edge type IRQ handler
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 0b49a0a..2bee072 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -64,7 +64,9 @@
char __weak kexec_purgatory[0];
size_t __weak kexec_purgatory_size = 0;
+#ifdef CONFIG_KEXEC_FILE
static int kexec_calculate_store_digests(struct kimage *image);
+#endif
/* Location of the reserved area for the crash kernel */
struct resource crashk_res = {
@@ -341,6 +343,7 @@
return ret;
}
+#ifdef CONFIG_KEXEC_FILE
static int copy_file_from_fd(int fd, void **buf, unsigned long *buf_len)
{
struct fd f = fdget(fd);
@@ -612,6 +615,9 @@
kfree(image);
return ret;
}
+#else /* CONFIG_KEXEC_FILE */
+static inline void kimage_file_post_load_cleanup(struct kimage *image) { }
+#endif /* CONFIG_KEXEC_FILE */
static int kimage_is_destination_range(struct kimage *image,
unsigned long start,
@@ -1375,6 +1381,7 @@
}
#endif
+#ifdef CONFIG_KEXEC_FILE
SYSCALL_DEFINE5(kexec_file_load, int, kernel_fd, int, initrd_fd,
unsigned long, cmdline_len, const char __user *, cmdline_ptr,
unsigned long, flags)
@@ -1451,6 +1458,8 @@
return ret;
}
+#endif /* CONFIG_KEXEC_FILE */
+
void crash_kexec(struct pt_regs *regs)
{
/* Take the kexec_mutex here to prevent sys_kexec_load
@@ -2006,6 +2015,7 @@
subsys_initcall(crash_save_vmcoreinfo_init);
+#ifdef CONFIG_KEXEC_FILE
static int __kexec_add_segment(struct kimage *image, char *buf,
unsigned long bufsz, unsigned long mem,
unsigned long memsz)
@@ -2682,6 +2692,7 @@
return 0;
}
+#endif /* CONFIG_KEXEC_FILE */
/*
* Move into place and start executing a preloaded standalone
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 734e9a7..3995f54 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1778,7 +1778,18 @@
unsigned long hash, flags = 0;
struct kretprobe_instance *ri;
- /*TODO: consider to only swap the RA after the last pre_handler fired */
+ /*
+ * To avoid deadlocks, prohibit return probing in NMI contexts,
+ * just skip the probe and increase the (inexact) 'nmissed'
+ * statistical counter, so that the user is informed that
+ * something happened:
+ */
+ if (unlikely(in_nmi())) {
+ rp->nmissed++;
+ return 0;
+ }
+
+ /* TODO: consider to only swap the RA after the last pre_handler fired */
hash = hash_ptr(current, KPROBE_HASH_BITS);
raw_spin_lock_irqsave(&rp->lock, flags);
if (!hlist_empty(&rp->free_instances)) {
diff --git a/kernel/resource.c b/kernel/resource.c
index da14b8d..60c5a38 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -351,15 +351,12 @@
end = res->end;
BUG_ON(start >= end);
+ if (first_level_children_only)
+ sibling_only = true;
+
read_lock(&resource_lock);
- if (first_level_children_only) {
- p = iomem_resource.child;
- sibling_only = true;
- } else
- p = &iomem_resource;
-
- while ((p = next_resource(p, sibling_only))) {
+ for (p = iomem_resource.child; p; p = next_resource(p, sibling_only)) {
if (p->flags != res->flags)
continue;
if (name && strcmp(p->name, name))
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 1654b12..5916a8e 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -65,15 +65,21 @@
#define FL_GLOBAL_CONTROL_MASK (FTRACE_OPS_FL_CONTROL)
#ifdef CONFIG_DYNAMIC_FTRACE
-#define INIT_REGEX_LOCK(opsname) \
- .regex_lock = __MUTEX_INITIALIZER(opsname.regex_lock),
+#define INIT_OPS_HASH(opsname) \
+ .func_hash = &opsname.local_hash, \
+ .local_hash.regex_lock = __MUTEX_INITIALIZER(opsname.local_hash.regex_lock),
+#define ASSIGN_OPS_HASH(opsname, val) \
+ .func_hash = val, \
+ .local_hash.regex_lock = __MUTEX_INITIALIZER(opsname.local_hash.regex_lock),
#else
-#define INIT_REGEX_LOCK(opsname)
+#define INIT_OPS_HASH(opsname)
+#define ASSIGN_OPS_HASH(opsname, val)
#endif
static struct ftrace_ops ftrace_list_end __read_mostly = {
.func = ftrace_stub,
.flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_STUB,
+ INIT_OPS_HASH(ftrace_list_end)
};
/* ftrace_enabled is a method to turn ftrace on or off */
@@ -140,7 +146,8 @@
{
#ifdef CONFIG_DYNAMIC_FTRACE
if (!(ops->flags & FTRACE_OPS_FL_INITIALIZED)) {
- mutex_init(&ops->regex_lock);
+ mutex_init(&ops->local_hash.regex_lock);
+ ops->func_hash = &ops->local_hash;
ops->flags |= FTRACE_OPS_FL_INITIALIZED;
}
#endif
@@ -899,7 +906,7 @@
static struct ftrace_ops ftrace_profile_ops __read_mostly = {
.func = function_profile_call,
.flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_INITIALIZED,
- INIT_REGEX_LOCK(ftrace_profile_ops)
+ INIT_OPS_HASH(ftrace_profile_ops)
};
static int register_ftrace_profiler(void)
@@ -1081,11 +1088,12 @@
#define EMPTY_HASH ((struct ftrace_hash *)&empty_hash)
static struct ftrace_ops global_ops = {
- .func = ftrace_stub,
- .notrace_hash = EMPTY_HASH,
- .filter_hash = EMPTY_HASH,
- .flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_INITIALIZED,
- INIT_REGEX_LOCK(global_ops)
+ .func = ftrace_stub,
+ .local_hash.notrace_hash = EMPTY_HASH,
+ .local_hash.filter_hash = EMPTY_HASH,
+ INIT_OPS_HASH(global_ops)
+ .flags = FTRACE_OPS_FL_RECURSION_SAFE |
+ FTRACE_OPS_FL_INITIALIZED,
};
struct ftrace_page {
@@ -1226,8 +1234,8 @@
void ftrace_free_filter(struct ftrace_ops *ops)
{
ftrace_ops_init(ops);
- free_ftrace_hash(ops->filter_hash);
- free_ftrace_hash(ops->notrace_hash);
+ free_ftrace_hash(ops->func_hash->filter_hash);
+ free_ftrace_hash(ops->func_hash->notrace_hash);
}
static struct ftrace_hash *alloc_ftrace_hash(int size_bits)
@@ -1288,9 +1296,9 @@
}
static void
-ftrace_hash_rec_disable(struct ftrace_ops *ops, int filter_hash);
+ftrace_hash_rec_disable_modify(struct ftrace_ops *ops, int filter_hash);
static void
-ftrace_hash_rec_enable(struct ftrace_ops *ops, int filter_hash);
+ftrace_hash_rec_enable_modify(struct ftrace_ops *ops, int filter_hash);
static int
ftrace_hash_move(struct ftrace_ops *ops, int enable,
@@ -1342,13 +1350,13 @@
* Remove the current set, update the hash and add
* them back.
*/
- ftrace_hash_rec_disable(ops, enable);
+ ftrace_hash_rec_disable_modify(ops, enable);
old_hash = *dst;
rcu_assign_pointer(*dst, new_hash);
free_ftrace_hash_rcu(old_hash);
- ftrace_hash_rec_enable(ops, enable);
+ ftrace_hash_rec_enable_modify(ops, enable);
return 0;
}
@@ -1382,8 +1390,8 @@
return 0;
#endif
- filter_hash = rcu_dereference_raw_notrace(ops->filter_hash);
- notrace_hash = rcu_dereference_raw_notrace(ops->notrace_hash);
+ filter_hash = rcu_dereference_raw_notrace(ops->func_hash->filter_hash);
+ notrace_hash = rcu_dereference_raw_notrace(ops->func_hash->notrace_hash);
if ((ftrace_hash_empty(filter_hash) ||
ftrace_lookup_ip(filter_hash, ip)) &&
@@ -1503,25 +1511,38 @@
static void ftrace_remove_tramp(struct ftrace_ops *ops,
struct dyn_ftrace *rec)
{
- struct ftrace_func_entry *entry;
-
- entry = ftrace_lookup_ip(ops->tramp_hash, rec->ip);
- if (!entry)
+ /* If TRAMP is not set, no ops should have a trampoline for this */
+ if (!(rec->flags & FTRACE_FL_TRAMP))
return;
+ rec->flags &= ~FTRACE_FL_TRAMP;
+
+ if ((!ftrace_hash_empty(ops->func_hash->filter_hash) &&
+ !ftrace_lookup_ip(ops->func_hash->filter_hash, rec->ip)) ||
+ ftrace_lookup_ip(ops->func_hash->notrace_hash, rec->ip))
+ return;
/*
* The tramp_hash entry will be removed at time
* of update.
*/
ops->nr_trampolines--;
- rec->flags &= ~FTRACE_FL_TRAMP;
}
-static void ftrace_clear_tramps(struct dyn_ftrace *rec)
+static void ftrace_clear_tramps(struct dyn_ftrace *rec, struct ftrace_ops *ops)
{
struct ftrace_ops *op;
+ /* If TRAMP is not set, no ops should have a trampoline for this */
+ if (!(rec->flags & FTRACE_FL_TRAMP))
+ return;
+
do_for_each_ftrace_op(op, ftrace_ops_list) {
+ /*
+ * This function is called to clear other tramps
+ * not the one that is being updated.
+ */
+ if (op == ops)
+ continue;
if (op->nr_trampolines)
ftrace_remove_tramp(op, rec);
} while_for_each_ftrace_op(op);
@@ -1554,14 +1575,14 @@
* gets inversed.
*/
if (filter_hash) {
- hash = ops->filter_hash;
- other_hash = ops->notrace_hash;
+ hash = ops->func_hash->filter_hash;
+ other_hash = ops->func_hash->notrace_hash;
if (ftrace_hash_empty(hash))
all = 1;
} else {
inc = !inc;
- hash = ops->notrace_hash;
- other_hash = ops->filter_hash;
+ hash = ops->func_hash->notrace_hash;
+ other_hash = ops->func_hash->filter_hash;
/*
* If the notrace hash has no items,
* then there's nothing to do.
@@ -1622,13 +1643,10 @@
/*
* If we are adding another function callback
* to this function, and the previous had a
- * trampoline used, then we need to go back to
- * the default trampoline.
+ * custom trampoline in use, then we need to go
+ * back to the default trampoline.
*/
- rec->flags &= ~FTRACE_FL_TRAMP;
-
- /* remove trampolines from any ops for this rec */
- ftrace_clear_tramps(rec);
+ ftrace_clear_tramps(rec, ops);
}
/*
@@ -1682,6 +1700,41 @@
__ftrace_hash_rec_update(ops, filter_hash, 1);
}
+static void ftrace_hash_rec_update_modify(struct ftrace_ops *ops,
+ int filter_hash, int inc)
+{
+ struct ftrace_ops *op;
+
+ __ftrace_hash_rec_update(ops, filter_hash, inc);
+
+ if (ops->func_hash != &global_ops.local_hash)
+ return;
+
+ /*
+ * If the ops shares the global_ops hash, then we need to update
+ * all ops that are enabled and use this hash.
+ */
+ do_for_each_ftrace_op(op, ftrace_ops_list) {
+ /* Already done */
+ if (op == ops)
+ continue;
+ if (op->func_hash == &global_ops.local_hash)
+ __ftrace_hash_rec_update(op, filter_hash, inc);
+ } while_for_each_ftrace_op(op);
+}
+
+static void ftrace_hash_rec_disable_modify(struct ftrace_ops *ops,
+ int filter_hash)
+{
+ ftrace_hash_rec_update_modify(ops, filter_hash, 0);
+}
+
+static void ftrace_hash_rec_enable_modify(struct ftrace_ops *ops,
+ int filter_hash)
+{
+ ftrace_hash_rec_update_modify(ops, filter_hash, 1);
+}
+
static void print_ip_ins(const char *fmt, unsigned char *p)
{
int i;
@@ -1896,8 +1949,8 @@
if (rec->flags & FTRACE_FL_TRAMP) {
ops = ftrace_find_tramp_ops_new(rec);
if (FTRACE_WARN_ON(!ops || !ops->trampoline)) {
- pr_warning("Bad trampoline accounting at: %p (%pS)\n",
- (void *)rec->ip, (void *)rec->ip);
+ pr_warn("Bad trampoline accounting at: %p (%pS) (%lx)\n",
+ (void *)rec->ip, (void *)rec->ip, rec->flags);
/* Ftrace is shutting down, return anything */
return (unsigned long)FTRACE_ADDR;
}
@@ -1964,7 +2017,7 @@
return ftrace_make_call(rec, ftrace_addr);
case FTRACE_UPDATE_MAKE_NOP:
- return ftrace_make_nop(NULL, rec, ftrace_addr);
+ return ftrace_make_nop(NULL, rec, ftrace_old_addr);
case FTRACE_UPDATE_MODIFY_CALL:
return ftrace_modify_call(rec, ftrace_old_addr, ftrace_addr);
@@ -2227,7 +2280,10 @@
} while_for_each_ftrace_rec();
/* The number of recs in the hash must match nr_trampolines */
- FTRACE_WARN_ON(ops->tramp_hash->count != ops->nr_trampolines);
+ if (FTRACE_WARN_ON(ops->tramp_hash->count != ops->nr_trampolines))
+ pr_warn("count=%ld trampolines=%d\n",
+ ops->tramp_hash->count,
+ ops->nr_trampolines);
return 0;
}
@@ -2436,8 +2492,8 @@
* Filter_hash being empty will default to trace module.
* But notrace hash requires a test of individual module functions.
*/
- return ftrace_hash_empty(ops->filter_hash) &&
- ftrace_hash_empty(ops->notrace_hash);
+ return ftrace_hash_empty(ops->func_hash->filter_hash) &&
+ ftrace_hash_empty(ops->func_hash->notrace_hash);
}
/*
@@ -2459,12 +2515,12 @@
return 0;
/* The function must be in the filter */
- if (!ftrace_hash_empty(ops->filter_hash) &&
- !ftrace_lookup_ip(ops->filter_hash, rec->ip))
+ if (!ftrace_hash_empty(ops->func_hash->filter_hash) &&
+ !ftrace_lookup_ip(ops->func_hash->filter_hash, rec->ip))
return 0;
/* If in notrace hash, we ignore it too */
- if (ftrace_lookup_ip(ops->notrace_hash, rec->ip))
+ if (ftrace_lookup_ip(ops->func_hash->notrace_hash, rec->ip))
return 0;
return 1;
@@ -2785,10 +2841,10 @@
} else {
rec = &iter->pg->records[iter->idx++];
if (((iter->flags & FTRACE_ITER_FILTER) &&
- !(ftrace_lookup_ip(ops->filter_hash, rec->ip))) ||
+ !(ftrace_lookup_ip(ops->func_hash->filter_hash, rec->ip))) ||
((iter->flags & FTRACE_ITER_NOTRACE) &&
- !ftrace_lookup_ip(ops->notrace_hash, rec->ip)) ||
+ !ftrace_lookup_ip(ops->func_hash->notrace_hash, rec->ip)) ||
((iter->flags & FTRACE_ITER_ENABLED) &&
!(rec->flags & FTRACE_FL_ENABLED))) {
@@ -2837,9 +2893,9 @@
* functions are enabled.
*/
if ((iter->flags & FTRACE_ITER_FILTER &&
- ftrace_hash_empty(ops->filter_hash)) ||
+ ftrace_hash_empty(ops->func_hash->filter_hash)) ||
(iter->flags & FTRACE_ITER_NOTRACE &&
- ftrace_hash_empty(ops->notrace_hash))) {
+ ftrace_hash_empty(ops->func_hash->notrace_hash))) {
if (*pos > 0)
return t_hash_start(m, pos);
iter->flags |= FTRACE_ITER_PRINTALL;
@@ -3001,12 +3057,12 @@
iter->ops = ops;
iter->flags = flag;
- mutex_lock(&ops->regex_lock);
+ mutex_lock(&ops->func_hash->regex_lock);
if (flag & FTRACE_ITER_NOTRACE)
- hash = ops->notrace_hash;
+ hash = ops->func_hash->notrace_hash;
else
- hash = ops->filter_hash;
+ hash = ops->func_hash->filter_hash;
if (file->f_mode & FMODE_WRITE) {
const int size_bits = FTRACE_HASH_DEFAULT_BITS;
@@ -3041,7 +3097,7 @@
file->private_data = iter;
out_unlock:
- mutex_unlock(&ops->regex_lock);
+ mutex_unlock(&ops->func_hash->regex_lock);
return ret;
}
@@ -3279,7 +3335,7 @@
{
.func = function_trace_probe_call,
.flags = FTRACE_OPS_FL_INITIALIZED,
- INIT_REGEX_LOCK(trace_probe_ops)
+ INIT_OPS_HASH(trace_probe_ops)
};
static int ftrace_probe_registered;
@@ -3342,7 +3398,7 @@
void *data)
{
struct ftrace_func_probe *entry;
- struct ftrace_hash **orig_hash = &trace_probe_ops.filter_hash;
+ struct ftrace_hash **orig_hash = &trace_probe_ops.func_hash->filter_hash;
struct ftrace_hash *hash;
struct ftrace_page *pg;
struct dyn_ftrace *rec;
@@ -3359,7 +3415,7 @@
if (WARN_ON(not))
return -EINVAL;
- mutex_lock(&trace_probe_ops.regex_lock);
+ mutex_lock(&trace_probe_ops.func_hash->regex_lock);
hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, *orig_hash);
if (!hash) {
@@ -3428,7 +3484,7 @@
out_unlock:
mutex_unlock(&ftrace_lock);
out:
- mutex_unlock(&trace_probe_ops.regex_lock);
+ mutex_unlock(&trace_probe_ops.func_hash->regex_lock);
free_ftrace_hash(hash);
return count;
@@ -3446,7 +3502,7 @@
struct ftrace_func_entry *rec_entry;
struct ftrace_func_probe *entry;
struct ftrace_func_probe *p;
- struct ftrace_hash **orig_hash = &trace_probe_ops.filter_hash;
+ struct ftrace_hash **orig_hash = &trace_probe_ops.func_hash->filter_hash;
struct list_head free_list;
struct ftrace_hash *hash;
struct hlist_node *tmp;
@@ -3468,7 +3524,7 @@
return;
}
- mutex_lock(&trace_probe_ops.regex_lock);
+ mutex_lock(&trace_probe_ops.func_hash->regex_lock);
hash = alloc_and_copy_ftrace_hash(FTRACE_HASH_DEFAULT_BITS, *orig_hash);
if (!hash)
@@ -3521,7 +3577,7 @@
mutex_unlock(&ftrace_lock);
out_unlock:
- mutex_unlock(&trace_probe_ops.regex_lock);
+ mutex_unlock(&trace_probe_ops.func_hash->regex_lock);
free_ftrace_hash(hash);
}
@@ -3717,12 +3773,12 @@
if (unlikely(ftrace_disabled))
return -ENODEV;
- mutex_lock(&ops->regex_lock);
+ mutex_lock(&ops->func_hash->regex_lock);
if (enable)
- orig_hash = &ops->filter_hash;
+ orig_hash = &ops->func_hash->filter_hash;
else
- orig_hash = &ops->notrace_hash;
+ orig_hash = &ops->func_hash->notrace_hash;
if (reset)
hash = alloc_ftrace_hash(FTRACE_HASH_DEFAULT_BITS);
@@ -3752,7 +3808,7 @@
mutex_unlock(&ftrace_lock);
out_regex_unlock:
- mutex_unlock(&ops->regex_lock);
+ mutex_unlock(&ops->func_hash->regex_lock);
free_ftrace_hash(hash);
return ret;
@@ -3975,15 +4031,15 @@
trace_parser_put(parser);
- mutex_lock(&iter->ops->regex_lock);
+ mutex_lock(&iter->ops->func_hash->regex_lock);
if (file->f_mode & FMODE_WRITE) {
filter_hash = !!(iter->flags & FTRACE_ITER_FILTER);
if (filter_hash)
- orig_hash = &iter->ops->filter_hash;
+ orig_hash = &iter->ops->func_hash->filter_hash;
else
- orig_hash = &iter->ops->notrace_hash;
+ orig_hash = &iter->ops->func_hash->notrace_hash;
mutex_lock(&ftrace_lock);
ret = ftrace_hash_move(iter->ops, filter_hash,
@@ -3994,7 +4050,7 @@
mutex_unlock(&ftrace_lock);
}
- mutex_unlock(&iter->ops->regex_lock);
+ mutex_unlock(&iter->ops->func_hash->regex_lock);
free_ftrace_hash(iter->hash);
kfree(iter);
@@ -4611,7 +4667,6 @@
static struct ftrace_ops global_ops = {
.func = ftrace_stub,
.flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_INITIALIZED,
- INIT_REGEX_LOCK(global_ops)
};
static int __init ftrace_nodyn_init(void)
@@ -4713,7 +4768,7 @@
static struct ftrace_ops control_ops = {
.func = ftrace_ops_control_func,
.flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_INITIALIZED,
- INIT_REGEX_LOCK(control_ops)
+ INIT_OPS_HASH(control_ops)
};
static inline void
@@ -5145,6 +5200,17 @@
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static struct ftrace_ops graph_ops = {
+ .func = ftrace_stub,
+ .flags = FTRACE_OPS_FL_RECURSION_SAFE |
+ FTRACE_OPS_FL_INITIALIZED |
+ FTRACE_OPS_FL_STUB,
+#ifdef FTRACE_GRAPH_TRAMP_ADDR
+ .trampoline = FTRACE_GRAPH_TRAMP_ADDR,
+#endif
+ ASSIGN_OPS_HASH(graph_ops, &global_ops.local_hash)
+};
+
static int ftrace_graph_active;
int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
@@ -5307,12 +5373,28 @@
*/
static void update_function_graph_func(void)
{
- if (ftrace_ops_list == &ftrace_list_end ||
- (ftrace_ops_list == &global_ops &&
- global_ops.next == &ftrace_list_end))
- ftrace_graph_entry = __ftrace_graph_entry;
- else
+ struct ftrace_ops *op;
+ bool do_test = false;
+
+ /*
+ * The graph and global ops share the same set of functions
+ * to test. If any other ops is on the list, then
+ * the graph tracing needs to test if its the function
+ * it should call.
+ */
+ do_for_each_ftrace_op(op, ftrace_ops_list) {
+ if (op != &global_ops && op != &graph_ops &&
+ op != &ftrace_list_end) {
+ do_test = true;
+ /* in double loop, break out with goto */
+ goto out;
+ }
+ } while_for_each_ftrace_op(op);
+ out:
+ if (do_test)
ftrace_graph_entry = ftrace_graph_entry_test;
+ else
+ ftrace_graph_entry = __ftrace_graph_entry;
}
static struct notifier_block ftrace_suspend_notifier = {
@@ -5353,16 +5435,7 @@
ftrace_graph_entry = ftrace_graph_entry_test;
update_function_graph_func();
- /* Function graph doesn't use the .func field of global_ops */
- global_ops.flags |= FTRACE_OPS_FL_STUB;
-
-#ifdef CONFIG_DYNAMIC_FTRACE
- /* Optimize function graph calling (if implemented by arch) */
- if (FTRACE_GRAPH_TRAMP_ADDR != 0)
- global_ops.trampoline = FTRACE_GRAPH_TRAMP_ADDR;
-#endif
-
- ret = ftrace_startup(&global_ops, FTRACE_START_FUNC_RET);
+ ret = ftrace_startup(&graph_ops, FTRACE_START_FUNC_RET);
out:
mutex_unlock(&ftrace_lock);
@@ -5380,12 +5453,7 @@
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
__ftrace_graph_entry = ftrace_graph_entry_stub;
- ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET);
- global_ops.flags &= ~FTRACE_OPS_FL_STUB;
-#ifdef CONFIG_DYNAMIC_FTRACE
- if (FTRACE_GRAPH_TRAMP_ADDR != 0)
- global_ops.trampoline = 0;
-#endif
+ ftrace_shutdown(&graph_ops, FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index afb04b9..b38fb2b 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -626,8 +626,22 @@
work = &cpu_buffer->irq_work;
}
- work->waiters_pending = true;
poll_wait(filp, &work->waiters, poll_table);
+ work->waiters_pending = true;
+ /*
+ * There's a tight race between setting the waiters_pending and
+ * checking if the ring buffer is empty. Once the waiters_pending bit
+ * is set, the next event will wake the task up, but we can get stuck
+ * if there's only a single event in.
+ *
+ * FIXME: Ideally, we need a memory barrier on the writer side as well,
+ * but adding a memory barrier to all events will cause too much of a
+ * performance hit in the fast path. We only need a memory barrier when
+ * the buffer goes from empty to having content. But as this race is
+ * extremely small, and it's not a problem if another event comes in, we
+ * will fix it later.
+ */
+ smp_mb();
if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) ||
(cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu)))
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 07c2832..a285900 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -892,6 +892,10 @@
the full mutex checks enabled with (CONFIG_PROVE_LOCKING) this
will test all possible w/w mutex interface abuse with the
exception of simply not acquiring all the required locks.
+ Note that this feature can introduce significant overhead, so
+ it really should not be enabled in a production or distro kernel,
+ even a debug kernel. If you are a driver writer, enable it. If
+ you are a distro, do not.
config DEBUG_LOCK_ALLOC
bool "Lock debugging: detect incorrect freeing of live locks"
@@ -1032,8 +1036,13 @@
either tracing or lock debugging.
config STACKTRACE
- bool
+ bool "Stack backtrace support"
depends on STACKTRACE_SUPPORT
+ help
+ This option causes the kernel to create a /proc/pid/stack for
+ every process, showing its current stack trace.
+ It is also used by various kernel debugging features that require
+ stack trace generation.
config DEBUG_KOBJECT
bool "kobject debugging"
diff --git a/mm/hugetlb_cgroup.c b/mm/hugetlb_cgroup.c
index 9eebfad..a67c26e 100644
--- a/mm/hugetlb_cgroup.c
+++ b/mm/hugetlb_cgroup.c
@@ -217,7 +217,7 @@
if (hugetlb_cgroup_disabled())
return;
- VM_BUG_ON(!spin_is_locked(&hugetlb_lock));
+ lockdep_assert_held(&hugetlb_lock);
h_cg = hugetlb_cgroup_from_page(page);
if (unlikely(!h_cg))
return;
diff --git a/mm/memblock.c b/mm/memblock.c
index 6d2f219..70fad0c 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -192,8 +192,7 @@
phys_addr_t align, phys_addr_t start,
phys_addr_t end, int nid)
{
- int ret;
- phys_addr_t kernel_end;
+ phys_addr_t kernel_end, ret;
/* pump up @end */
if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
diff --git a/mm/memory.c b/mm/memory.c
index ab3537b..adeac30 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -751,7 +751,7 @@
unsigned long pfn = pte_pfn(pte);
if (HAVE_PTE_SPECIAL) {
- if (likely(!pte_special(pte) || pte_numa(pte)))
+ if (likely(!pte_special(pte)))
goto check_pfn;
if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
return NULL;
@@ -777,15 +777,14 @@
}
}
+ if (is_zero_pfn(pfn))
+ return NULL;
check_pfn:
if (unlikely(pfn > highest_memmap_pfn)) {
print_bad_pte(vma, addr, pte, NULL);
return NULL;
}
- if (is_zero_pfn(pfn))
- return NULL;
-
/*
* NOTE! We still have PageReserved() pages in the page tables.
* eg. VDSO mappings can cause them to exist.
diff --git a/mm/pgtable-generic.c b/mm/pgtable-generic.c
index a8b9199..dfb79e0 100644
--- a/mm/pgtable-generic.c
+++ b/mm/pgtable-generic.c
@@ -195,7 +195,7 @@
pmd_t entry = *pmdp;
if (pmd_numa(entry))
entry = pmd_mknonnuma(entry);
- set_pmd_at(vma->vm_mm, address, pmdp, pmd_mknotpresent(*pmdp));
+ set_pmd_at(vma->vm_mm, address, pmdp, pmd_mknotpresent(entry));
flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/mm/zbud.c b/mm/zbud.c
index a05790b..f26e7fc 100644
--- a/mm/zbud.c
+++ b/mm/zbud.c
@@ -195,6 +195,7 @@
.total_size = zbud_zpool_total_size,
};
+MODULE_ALIAS("zpool-zbud");
#endif /* CONFIG_ZPOOL */
/*****************
diff --git a/mm/zpool.c b/mm/zpool.c
index e40612a..739cdf0 100644
--- a/mm/zpool.c
+++ b/mm/zpool.c
@@ -150,7 +150,7 @@
driver = zpool_get_driver(type);
if (!driver) {
- request_module(type);
+ request_module("zpool-%s", type);
driver = zpool_get_driver(type);
}
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index 4e2fc83..94f38fa 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -315,6 +315,7 @@
.total_size = zs_zpool_total_size,
};
+MODULE_ALIAS("zpool-zsmalloc");
#endif /* CONFIG_ZPOOL */
/* per-cpu VM mapping areas for zspage accesses that cross page boundaries */
diff --git a/net/atm/lec.c b/net/atm/lec.c
index e4853b5..4b98f89 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -410,9 +410,11 @@
priv->lane2_ops = NULL;
if (priv->lane_version > 1)
priv->lane2_ops = &lane2_ops;
+ rtnl_lock();
if (dev_set_mtu(dev, mesg->content.config.mtu))
pr_info("%s: change_mtu to %d failed\n",
dev->name, mesg->content.config.mtu);
+ rtnl_unlock();
priv->is_proxy = mesg->content.config.is_proxy;
break;
case l_flush_tran_id:
diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c
index 52c43f9..fc1835c 100644
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -188,7 +188,7 @@
/* Reached the end of the list, so insert after 'frag_entry_last'. */
if (likely(frag_entry_last)) {
- hlist_add_behind(&frag_entry_last->list, &frag_entry_new->list);
+ hlist_add_behind(&frag_entry_new->list, &frag_entry_last->list);
chain->size += skb->len - hdr_size;
chain->timestamp = jiffies;
ret = true;
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index cb4459b..76b7f5e 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -643,7 +643,7 @@
if (dst->flags & DST_HOST) {
mp = dst_metrics_write_ptr(dst);
} else {
- mp = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL);
+ mp = kzalloc(sizeof(u32) * RTAX_MAX, GFP_ATOMIC);
if (!mp)
return -ENOMEM;
dst_init_metrics(dst, mp, 0);
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 6d537f0..0375009 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -1444,7 +1444,7 @@
list_del(&sdata->reserved_chanctx_list);
list_move(&sdata->assigned_chanctx_list,
- &new_ctx->assigned_vifs);
+ &ctx->assigned_vifs);
sdata->reserved_chanctx = NULL;
ieee80211_vif_chanctx_reservation_complete(sdata);
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index fe5cda0..5231652 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -42,6 +42,9 @@
static int make_writable(struct sk_buff *skb, int write_len)
{
+ if (!pskb_may_pull(skb, write_len))
+ return -ENOMEM;
+
if (!skb_cloned(skb) || skb_clone_writable(skb, write_len))
return 0;
@@ -70,6 +73,8 @@
vlan_set_encap_proto(skb, vhdr);
skb->mac_header += VLAN_HLEN;
+ if (skb_network_offset(skb) < ETH_HLEN)
+ skb_set_network_header(skb, ETH_HLEN);
skb_reset_mac_len(skb);
return 0;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 8d9f804..93896d2 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -632,6 +632,7 @@
p1->tov_in_jiffies = msecs_to_jiffies(p1->retire_blk_tov);
p1->blk_sizeof_priv = req_u->req3.tp_sizeof_priv;
+ p1->max_frame_len = p1->kblk_size - BLK_PLUS_PRIV(p1->blk_sizeof_priv);
prb_init_ft_ops(p1, req_u);
prb_setup_retire_blk_timer(po, tx_ring);
prb_open_block(p1, pbd);
@@ -1942,6 +1943,18 @@
if ((int)snaplen < 0)
snaplen = 0;
}
+ } else if (unlikely(macoff + snaplen >
+ GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len)) {
+ u32 nval;
+
+ nval = GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len - macoff;
+ pr_err_once("tpacket_rcv: packet too big, clamped from %u to %u. macoff=%u\n",
+ snaplen, nval, macoff);
+ snaplen = nval;
+ if (unlikely((int)snaplen < 0)) {
+ snaplen = 0;
+ macoff = GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len;
+ }
}
spin_lock(&sk->sk_receive_queue.lock);
h.raw = packet_current_rx_frame(po, skb,
@@ -3783,6 +3796,10 @@
goto out;
if (unlikely(req->tp_block_size & (PAGE_SIZE - 1)))
goto out;
+ if (po->tp_version >= TPACKET_V3 &&
+ (int)(req->tp_block_size -
+ BLK_PLUS_PRIV(req_u->req3.tp_sizeof_priv)) <= 0)
+ goto out;
if (unlikely(req->tp_frame_size < po->tp_hdrlen +
po->tp_reserve))
goto out;
diff --git a/net/packet/internal.h b/net/packet/internal.h
index eb9580a..cdddf6a 100644
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -29,6 +29,7 @@
char *pkblk_start;
char *pkblk_end;
int kblk_size;
+ unsigned int max_frame_len;
unsigned int knum_blocks;
uint64_t knxt_seq_num;
char *prev;
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index ead5264..762a04b 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -159,7 +159,6 @@
struct cbq_class *tx_borrowed;
int tx_len;
psched_time_t now; /* Cached timestamp */
- psched_time_t now_rt; /* Cached real time */
unsigned int pmask;
struct hrtimer delay_timer;
@@ -353,12 +352,7 @@
int toplevel = q->toplevel;
if (toplevel > cl->level && !(qdisc_is_throttled(cl->q))) {
- psched_time_t now;
- psched_tdiff_t incr;
-
- now = psched_get_time();
- incr = now - q->now_rt;
- now = q->now + incr;
+ psched_time_t now = psched_get_time();
do {
if (cl->undertime < now) {
@@ -700,8 +694,13 @@
struct cbq_class *this = q->tx_class;
struct cbq_class *cl = this;
int len = q->tx_len;
+ psched_time_t now;
q->tx_class = NULL;
+ /* Time integrator. We calculate EOS time
+ * by adding expected packet transmission time.
+ */
+ now = q->now + L2T(&q->link, len);
for ( ; cl; cl = cl->share) {
long avgidle = cl->avgidle;
@@ -717,7 +716,7 @@
* idle = (now - last) - last_pktlen/rate
*/
- idle = q->now - cl->last;
+ idle = now - cl->last;
if ((unsigned long)idle > 128*1024*1024) {
avgidle = cl->maxidle;
} else {
@@ -761,7 +760,7 @@
idle -= L2T(&q->link, len);
idle += L2T(cl, len);
- cl->undertime = q->now + idle;
+ cl->undertime = now + idle;
} else {
/* Underlimit */
@@ -771,7 +770,8 @@
else
cl->avgidle = avgidle;
}
- cl->last = q->now;
+ if ((s64)(now - cl->last) > 0)
+ cl->last = now;
}
cbq_update_toplevel(q, this, q->tx_borrowed);
@@ -943,31 +943,13 @@
struct sk_buff *skb;
struct cbq_sched_data *q = qdisc_priv(sch);
psched_time_t now;
- psched_tdiff_t incr;
now = psched_get_time();
- incr = now - q->now_rt;
- if (q->tx_class) {
- psched_tdiff_t incr2;
- /* Time integrator. We calculate EOS time
- * by adding expected packet transmission time.
- * If real time is greater, we warp artificial clock,
- * so that:
- *
- * cbq_time = max(real_time, work);
- */
- incr2 = L2T(&q->link, q->tx_len);
- q->now += incr2;
+ if (q->tx_class)
cbq_update(q);
- if ((incr -= incr2) < 0)
- incr = 0;
- q->now += incr;
- } else {
- if (now > q->now)
- q->now = now;
- }
- q->now_rt = now;
+
+ q->now = now;
for (;;) {
q->wd_expires = 0;
@@ -1223,7 +1205,6 @@
hrtimer_cancel(&q->delay_timer);
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
- q->now_rt = q->now;
for (prio = 0; prio <= TC_CBQ_MAXPRIO; prio++)
q->active[prio] = NULL;
@@ -1407,7 +1388,6 @@
q->delay_timer.function = cbq_undelay;
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
- q->now_rt = q->now;
cbq_link_class(&q->link);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 06a9ee6..a88b852 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -813,6 +813,7 @@
else {
dst_release(transport->dst);
transport->dst = NULL;
+ ulp_notify = false;
}
spc_state = SCTP_ADDR_UNREACHABLE;
@@ -1244,7 +1245,7 @@
{
u8 score_curr, score_best;
- if (best == NULL)
+ if (best == NULL || curr == best)
return curr;
score_curr = sctp_trans_score(curr);
@@ -1355,14 +1356,11 @@
trans_sec = trans_pri;
/* If we failed to find a usable transport, just camp on the
- * primary or retran, even if they are inactive, if possible
- * pick a PF iff it's the better choice.
+ * active or pick a PF iff it's the better choice.
*/
if (trans_pri == NULL) {
- trans_pri = sctp_trans_elect_best(asoc->peer.primary_path,
- asoc->peer.retran_path);
- trans_pri = sctp_trans_elect_best(trans_pri, trans_pf);
- trans_sec = asoc->peer.primary_path;
+ trans_pri = sctp_trans_elect_best(asoc->peer.active_path, trans_pf);
+ trans_sec = trans_pri;
}
/* Set the active and retran transports. */
diff --git a/net/tipc/port.h b/net/tipc/port.h
index 3f93454..3087da3 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -179,9 +179,12 @@
return msg_importance(&port->phdr);
}
-static inline void tipc_port_set_importance(struct tipc_port *port, int imp)
+static inline int tipc_port_set_importance(struct tipc_port *port, int imp)
{
+ if (imp > TIPC_CRITICAL_IMPORTANCE)
+ return -EINVAL;
msg_set_importance(&port->phdr, (u32)imp);
+ return 0;
}
#endif
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 7d423ee..ff8c811 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1973,7 +1973,7 @@
switch (opt) {
case TIPC_IMPORTANCE:
- tipc_port_set_importance(port, value);
+ res = tipc_port_set_importance(port, value);
break;
case TIPC_SRC_DROPPABLE:
if (sock->type != SOCK_STREAM)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 31a731e..b385bcb 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2133,7 +2133,7 @@
# Check for improperly formed commit descriptions
if ($in_commit_log &&
$line =~ /\bcommit\s+[0-9a-f]{5,}/i &&
- $line !~ /\b[Cc]ommit [0-9a-f]{12,16} \("/) {
+ $line !~ /\b[Cc]ommit [0-9a-f]{12,40} \("/) {
$line =~ /\b(c)ommit\s+([0-9a-f]{5,})/i;
my $init_char = $1;
my $orig_commit = lc($2);
@@ -2141,7 +2141,7 @@
my $desc = 'commit description';
($id, $desc) = git_commit_info($orig_commit, $id, $desc);
ERROR("GIT_COMMIT_ID",
- "Please use 12 to 16 chars for the git commit ID like: '${init_char}ommit $id (\"$desc\")'\n" . $herecurr);
+ "Please use 12 or more chars for the git commit ID like: '${init_char}ommit $id (\"$desc\")'\n" . $herecurr);
}
# Check for added, moved or deleted files
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 16a07cf..70bea94 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2085,6 +2085,7 @@
$prototype =~ s/^noinline +//;
$prototype =~ s/__init +//;
$prototype =~ s/__init_or_module +//;
+ $prototype =~ s/__meminit +//;
$prototype =~ s/__must_check +//;
$prototype =~ s/__weak +//;
my $define = $prototype =~ s/^#\s*define\s+//; #ak added
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index a3386d1..bed745c 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -173,7 +173,7 @@
* Use filesystem name if filesystem does not support rename()
* operation.
*/
- if (!inode->i_op->rename)
+ if (!inode->i_op->rename && !inode->i_op->rename2)
goto prepend_filesystem_name;
}
/* Prepend device name. */
@@ -282,7 +282,8 @@
* Get local name for filesystems without rename() operation
* or dentry without vfsmount.
*/
- if (!path->mnt || !inode->i_op->rename)
+ if (!path->mnt ||
+ (!inode->i_op->rename && !inode->i_op->rename2))
pos = tomoyo_get_local_path(path->dentry, buf,
buf_len - 1);
/* Get absolute name for the rest. */
diff --git a/sound/core/info.c b/sound/core/info.c
index 051d55b..9f404e9 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -684,7 +684,7 @@
* snd_info_get_line - read one line from the procfs buffer
* @buffer: the procfs buffer
* @line: the buffer to store
- * @len: the max. buffer size - 1
+ * @len: the max. buffer size
*
* Reads one line from the buffer and stores the string.
*
@@ -704,7 +704,7 @@
buffer->stop = 1;
if (c == '\n')
break;
- if (len) {
+ if (len > 1) {
len--;
*line++ = c;
}
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index 4560ca0..2c6fd80 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -142,11 +142,11 @@
},
[SNDRV_PCM_FORMAT_DSD_U8] = {
.width = 8, .phys = 8, .le = 1, .signd = 0,
- .silence = {},
+ .silence = { 0x69 },
},
[SNDRV_PCM_FORMAT_DSD_U16_LE] = {
.width = 16, .phys = 16, .le = 1, .signd = 0,
- .silence = {},
+ .silence = { 0x69, 0x69 },
},
/* FIXME: the following three formats are not defined properly yet */
[SNDRV_PCM_FORMAT_MPEG] = {
diff --git a/sound/pci/ctxfi/ct20k1reg.h b/sound/pci/ctxfi/ct20k1reg.h
index f2e34e3..5851249 100644
--- a/sound/pci/ctxfi/ct20k1reg.h
+++ b/sound/pci/ctxfi/ct20k1reg.h
@@ -7,7 +7,7 @@
*/
#ifndef CT20K1REG_H
-#define CT20k1REG_H
+#define CT20K1REG_H
/* 20k1 registers */
#define DSPXRAM_START 0x000000
@@ -632,5 +632,3 @@
#define I2SD_R 0x19L
#endif /* CT20K1REG_H */
-
-
diff --git a/sound/pci/hda/ca0132_regs.h b/sound/pci/hda/ca0132_regs.h
index 07e7609..8371274 100644
--- a/sound/pci/hda/ca0132_regs.h
+++ b/sound/pci/hda/ca0132_regs.h
@@ -20,7 +20,7 @@
*/
#ifndef __CA0132_REGS_H
-#define __CA0312_REGS_H
+#define __CA0132_REGS_H
#define DSP_CHIP_OFFSET 0x100000
#define DSP_DBGCNTL_MODULE_OFFSET 0xE30
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 36badba..99d7d7f 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -50,6 +50,8 @@
#define is_haswell_plus(codec) (is_haswell(codec) || is_broadwell(codec))
#define is_valleyview(codec) ((codec)->vendor_id == 0x80862882)
+#define is_cherryview(codec) ((codec)->vendor_id == 0x80862883)
+#define is_valleyview_plus(codec) (is_valleyview(codec) || is_cherryview(codec))
struct hdmi_spec_per_cvt {
hda_nid_t cvt_nid;
@@ -1459,7 +1461,7 @@
mux_idx);
/* configure unused pins to choose other converters */
- if (is_haswell_plus(codec) || is_valleyview(codec))
+ if (is_haswell_plus(codec) || is_valleyview_plus(codec))
intel_not_share_assigned_cvt(codec, per_pin->pin_nid, mux_idx);
snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid);
@@ -1598,7 +1600,8 @@
* and this can make HW reset converter selection on a pin.
*/
if (eld->eld_valid && !old_eld_valid && per_pin->setup) {
- if (is_haswell_plus(codec) || is_valleyview(codec)) {
+ if (is_haswell_plus(codec) ||
+ is_valleyview_plus(codec)) {
intel_verify_pin_cvt_connect(codec, per_pin);
intel_not_share_assigned_cvt(codec, pin_nid,
per_pin->mux_idx);
@@ -1779,7 +1782,7 @@
bool non_pcm;
int pinctl;
- if (is_haswell_plus(codec) || is_valleyview(codec)) {
+ if (is_haswell_plus(codec) || is_valleyview_plus(codec)) {
/* Verify pin:cvt selections to avoid silent audio after S3.
* After S3, the audio driver restores pin:cvt selections
* but this can happen before gfx is ready and such selection
@@ -2330,9 +2333,8 @@
intel_haswell_fixup_enable_dp12(codec);
}
- if (is_haswell(codec) || is_valleyview(codec)) {
+ if (is_haswell_plus(codec) || is_valleyview_plus(codec))
codec->depop_delay = 0;
- }
if (hdmi_parse_codec(codec) < 0) {
codec->spec = NULL;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6b38ec3..d446ac3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -181,6 +181,8 @@
spec->pll_coef_idx);
val = snd_hda_codec_read(codec, spec->pll_nid, 0,
AC_VERB_GET_PROC_COEF, 0);
+ if (val == -1)
+ return;
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_COEF_INDEX,
spec->pll_coef_idx);
snd_hda_codec_write(codec, spec->pll_nid, 0, AC_VERB_SET_PROC_COEF,
@@ -2806,6 +2808,8 @@
static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up)
{
int val = alc_read_coef_idx(codec, 0x04);
+ if (val == -1)
+ return;
if (power_up)
val |= 1 << 11;
else
@@ -3264,6 +3268,15 @@
snd_hda_codec_resume_cache(codec);
alc_inv_dmic_sync(codec, true);
hda_call_check_power_status(codec, 0x01);
+
+ /* on some machine, the BIOS will clear the codec gpio data when enter
+ * suspend, and won't restore the data after resume, so we restore it
+ * in the driver.
+ */
+ if (spec->gpio_led)
+ snd_hda_codec_write(codec, codec->afg, 0, AC_VERB_SET_GPIO_DATA,
+ spec->gpio_led);
+
if (spec->has_alc5505_dsp)
alc5505_dsp_resume(codec);
@@ -4395,6 +4408,7 @@
ALC292_FIXUP_TPT440_DOCK,
ALC283_FIXUP_BXBT2807_MIC,
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED,
+ ALC282_FIXUP_ASPIRE_V5_PINS,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -4842,6 +4856,22 @@
.chained_before = true,
.chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE
},
+ [ALC282_FIXUP_ASPIRE_V5_PINS] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x12, 0x90a60130 },
+ { 0x14, 0x90170110 },
+ { 0x17, 0x40000008 },
+ { 0x18, 0x411111f0 },
+ { 0x19, 0x411111f0 },
+ { 0x1a, 0x411111f0 },
+ { 0x1b, 0x411111f0 },
+ { 0x1d, 0x40f89b2d },
+ { 0x1e, 0x411111f0 },
+ { 0x21, 0x0321101f },
+ { },
+ },
+ },
};
@@ -4853,6 +4883,7 @@
SND_PCI_QUIRK(0x1025, 0x0740, "Acer AO725", ALC271_FIXUP_HP_GATE_MIC_JACK),
SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK),
SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
+ SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
SND_PCI_QUIRK(0x1028, 0x05bd, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x05be, "Dell", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
@@ -5311,27 +5342,30 @@
if ((alc_get_coef0(codec) & 0x00ff) == 0x017) {
val = alc_read_coef_idx(codec, 0x04);
/* Power up output pin */
- alc_write_coef_idx(codec, 0x04, val | (1<<11));
+ if (val != -1)
+ alc_write_coef_idx(codec, 0x04, val | (1<<11));
}
if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
val = alc_read_coef_idx(codec, 0xd);
- if ((val & 0x0c00) >> 10 != 0x1) {
+ if (val != -1 && (val & 0x0c00) >> 10 != 0x1) {
/* Capless ramp up clock control */
alc_write_coef_idx(codec, 0xd, val | (1<<10));
}
val = alc_read_coef_idx(codec, 0x17);
- if ((val & 0x01c0) >> 6 != 0x4) {
+ if (val != -1 && (val & 0x01c0) >> 6 != 0x4) {
/* Class D power on reset */
alc_write_coef_idx(codec, 0x17, val | (1<<7));
}
}
val = alc_read_coef_idx(codec, 0xd); /* Class D */
- alc_write_coef_idx(codec, 0xd, val | (1<<14));
+ if (val != -1)
+ alc_write_coef_idx(codec, 0xd, val | (1<<14));
val = alc_read_coef_idx(codec, 0x4); /* HP */
- alc_write_coef_idx(codec, 0x4, val | (1<<11));
+ if (val != -1)
+ alc_write_coef_idx(codec, 0x4, val | (1<<11));
}
/*
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index bd41ee4..2c71f16 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -1278,6 +1278,8 @@
else
rates = &arizona_48k_bclk_rates[0];
+ wl = snd_pcm_format_width(params_format(params));
+
if (tdm_slots) {
arizona_aif_dbg(dai, "Configuring for %d %d bit TDM slots\n",
tdm_slots, tdm_width);
@@ -1285,6 +1287,7 @@
channels = tdm_slots;
} else {
bclk_target = snd_soc_params_to_bclk(params);
+ tdm_width = wl;
}
if (chan_limit && chan_limit < channels) {
@@ -1319,8 +1322,7 @@
arizona_aif_dbg(dai, "BCLK %dHz LRCLK %dHz\n",
rates[bclk], rates[bclk] / lrclk);
- wl = snd_pcm_format_width(params_format(params));
- frame = wl << ARIZONA_AIF1TX_WL_SHIFT | wl;
+ frame = wl << ARIZONA_AIF1TX_WL_SHIFT | tdm_width;
reconfig = arizona_aif_cfg_changed(codec, base, bclk, lrclk, frame);
diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c
index 163ec38..0c8aefa 100644
--- a/sound/soc/codecs/pcm512x.c
+++ b/sound/soc/codecs/pcm512x.c
@@ -259,13 +259,13 @@
pcm512x_ramp_step_text);
static const struct snd_kcontrol_new pcm512x_controls[] = {
-SOC_DOUBLE_R_TLV("Playback Digital Volume", PCM512x_DIGITAL_VOLUME_2,
+SOC_DOUBLE_R_TLV("Digital Playback Volume", PCM512x_DIGITAL_VOLUME_2,
PCM512x_DIGITAL_VOLUME_3, 0, 255, 1, digital_tlv),
SOC_DOUBLE_TLV("Playback Volume", PCM512x_ANALOG_GAIN_CTRL,
PCM512x_LAGN_SHIFT, PCM512x_RAGN_SHIFT, 1, 1, analog_tlv),
SOC_DOUBLE_TLV("Playback Boost Volume", PCM512x_ANALOG_GAIN_BOOST,
PCM512x_AGBL_SHIFT, PCM512x_AGBR_SHIFT, 1, 0, boost_tlv),
-SOC_DOUBLE("Playback Digital Switch", PCM512x_MUTE, PCM512x_RQML_SHIFT,
+SOC_DOUBLE("Digital Playback Switch", PCM512x_MUTE, PCM512x_RQML_SHIFT,
PCM512x_RQMR_SHIFT, 1, 1),
SOC_SINGLE("Deemphasis Switch", PCM512x_DSP, PCM512x_DEMP_SHIFT, 1, 1),
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index c28508d..6a6b2ff 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -403,7 +403,8 @@
return ret;
}
-static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+static int __davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id,
+ int div, bool explicit)
{
struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(dai);
@@ -420,7 +421,8 @@
ACLKXDIV(div - 1), ACLKXDIV_MASK);
mcasp_mod_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG,
ACLKRDIV(div - 1), ACLKRDIV_MASK);
- mcasp->bclk_div = div;
+ if (explicit)
+ mcasp->bclk_div = div;
break;
case 2: /* BCLK/LRCLK ratio */
@@ -434,6 +436,12 @@
return 0;
}
+static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id,
+ int div)
+{
+ return __davinci_mcasp_set_clkdiv(dai, div_id, div, 1);
+}
+
static int davinci_mcasp_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
@@ -738,7 +746,7 @@
"Inaccurate BCLK: %u Hz / %u != %u Hz\n",
mcasp->sysclk_freq, div, bclk_freq);
}
- davinci_mcasp_set_clkdiv(cpu_dai, 1, div);
+ __davinci_mcasp_set_clkdiv(cpu_dai, 1, div, 0);
}
ret = mcasp_common_hw_param(mcasp, substream->stream,
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index f54a8fc..f3012b6 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -49,7 +49,6 @@
tristate "Enhanced Serial Audio Interface (ESAI) module support"
select REGMAP_MMIO
select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
- select SND_SOC_FSL_UTILS
help
Say Y if you want to add Enhanced Synchronous Audio Interface
(ESAI) support for the Freescale CPUs.
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 72d154e..a3b29ed 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -18,7 +18,6 @@
#include "fsl_esai.h"
#include "imx-pcm.h"
-#include "fsl_utils.h"
#define FSL_ESAI_RATES SNDRV_PCM_RATE_8000_192000
#define FSL_ESAI_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
@@ -607,7 +606,6 @@
.hw_params = fsl_esai_hw_params,
.set_sysclk = fsl_esai_set_dai_sysclk,
.set_fmt = fsl_esai_set_dai_fmt,
- .xlate_tdm_slot_mask = fsl_asoc_xlate_tdm_slot_mask,
.set_tdm_slot = fsl_esai_set_dai_tdm_slot,
};
diff --git a/sound/soc/intel/sst-acpi.c b/sound/soc/intel/sst-acpi.c
index 42edc6f..03d0a16 100644
--- a/sound/soc/intel/sst-acpi.c
+++ b/sound/soc/intel/sst-acpi.c
@@ -246,8 +246,8 @@
};
static struct sst_acpi_mach baytrail_machines[] = {
- { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-i2s_master" },
- { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-i2s_master" },
+ { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-48kHz_i2s_master" },
+ { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-48kHz_i2s_master" },
{}
};
diff --git a/sound/soc/intel/sst-baytrail-ipc.c b/sound/soc/intel/sst-baytrail-ipc.c
index 67673a2..b4ad98c 100644
--- a/sound/soc/intel/sst-baytrail-ipc.c
+++ b/sound/soc/intel/sst-baytrail-ipc.c
@@ -817,7 +817,7 @@
.ops = &sst_byt_ops,
};
-int sst_byt_dsp_suspend_noirq(struct device *dev, struct sst_pdata *pdata)
+int sst_byt_dsp_suspend_late(struct device *dev, struct sst_pdata *pdata)
{
struct sst_byt *byt = pdata->dsp;
@@ -826,14 +826,6 @@
sst_byt_drop_all(byt);
dev_dbg(byt->dev, "dsp in reset\n");
- return 0;
-}
-EXPORT_SYMBOL_GPL(sst_byt_dsp_suspend_noirq);
-
-int sst_byt_dsp_suspend_late(struct device *dev, struct sst_pdata *pdata)
-{
- struct sst_byt *byt = pdata->dsp;
-
dev_dbg(byt->dev, "free all blocks and unload fw\n");
sst_fw_unload(byt->fw);
diff --git a/sound/soc/intel/sst-baytrail-ipc.h b/sound/soc/intel/sst-baytrail-ipc.h
index 06a4d20..8faff6d 100644
--- a/sound/soc/intel/sst-baytrail-ipc.h
+++ b/sound/soc/intel/sst-baytrail-ipc.h
@@ -66,7 +66,6 @@
int sst_byt_dsp_init(struct device *dev, struct sst_pdata *pdata);
void sst_byt_dsp_free(struct device *dev, struct sst_pdata *pdata);
struct sst_dsp *sst_byt_get_dsp(struct sst_byt *byt);
-int sst_byt_dsp_suspend_noirq(struct device *dev, struct sst_pdata *pdata);
int sst_byt_dsp_suspend_late(struct device *dev, struct sst_pdata *pdata);
int sst_byt_dsp_boot(struct device *dev, struct sst_pdata *pdata);
int sst_byt_dsp_wait_for_ready(struct device *dev, struct sst_pdata *pdata);
diff --git a/sound/soc/intel/sst-baytrail-pcm.c b/sound/soc/intel/sst-baytrail-pcm.c
index 599401c..eab1c7d 100644
--- a/sound/soc/intel/sst-baytrail-pcm.c
+++ b/sound/soc/intel/sst-baytrail-pcm.c
@@ -59,6 +59,9 @@
/* DAI data */
struct sst_byt_pcm_data pcm[BYT_PCM_COUNT];
+
+ /* flag indicating is stream context restore needed after suspend */
+ bool restore_stream;
};
/* this may get called several times by oss emulation */
@@ -184,7 +187,10 @@
sst_byt_stream_start(byt, pcm_data->stream, 0);
break;
case SNDRV_PCM_TRIGGER_RESUME:
- schedule_work(&pcm_data->work);
+ if (pdata->restore_stream == true)
+ schedule_work(&pcm_data->work);
+ else
+ sst_byt_stream_resume(byt, pcm_data->stream);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
sst_byt_stream_resume(byt, pcm_data->stream);
@@ -193,6 +199,7 @@
sst_byt_stream_stop(byt, pcm_data->stream);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
+ pdata->restore_stream = false;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
sst_byt_stream_pause(byt, pcm_data->stream);
break;
@@ -404,26 +411,10 @@
};
#ifdef CONFIG_PM
-static int sst_byt_pcm_dev_suspend_noirq(struct device *dev)
-{
- struct sst_pdata *sst_pdata = dev_get_platdata(dev);
- int ret;
-
- dev_dbg(dev, "suspending noirq\n");
-
- /* at this point all streams will be stopped and context saved */
- ret = sst_byt_dsp_suspend_noirq(dev, sst_pdata);
- if (ret < 0) {
- dev_err(dev, "failed to suspend %d\n", ret);
- return ret;
- }
-
- return ret;
-}
-
static int sst_byt_pcm_dev_suspend_late(struct device *dev)
{
struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+ struct sst_byt_priv_data *priv_data = dev_get_drvdata(dev);
int ret;
dev_dbg(dev, "suspending late\n");
@@ -434,34 +425,30 @@
return ret;
}
+ priv_data->restore_stream = true;
+
return ret;
}
static int sst_byt_pcm_dev_resume_early(struct device *dev)
{
struct sst_pdata *sst_pdata = dev_get_platdata(dev);
+ int ret;
dev_dbg(dev, "resume early\n");
/* load fw and boot DSP */
- return sst_byt_dsp_boot(dev, sst_pdata);
-}
-
-static int sst_byt_pcm_dev_resume(struct device *dev)
-{
- struct sst_pdata *sst_pdata = dev_get_platdata(dev);
-
- dev_dbg(dev, "resume\n");
+ ret = sst_byt_dsp_boot(dev, sst_pdata);
+ if (ret)
+ return ret;
/* wait for FW to finish booting */
return sst_byt_dsp_wait_for_ready(dev, sst_pdata);
}
static const struct dev_pm_ops sst_byt_pm_ops = {
- .suspend_noirq = sst_byt_pcm_dev_suspend_noirq,
.suspend_late = sst_byt_pcm_dev_suspend_late,
.resume_early = sst_byt_pcm_dev_resume_early,
- .resume = sst_byt_pcm_dev_resume,
};
#define SST_BYT_PM_OPS (&sst_byt_pm_ops)
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 0109f6c2..a8e0974 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -765,9 +765,7 @@
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
- SNDRV_PCM_FMTBIT_S24_LE | \
- SNDRV_PCM_FMTBIT_S32_LE)
+#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
.startup = pxa_ssp_startup,
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 8348352..177bd86 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2860,12 +2860,14 @@
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
unsigned int reg_val, val;
- int ret = 0;
- if (e->reg != SND_SOC_NOPM)
- ret = soc_dapm_read(dapm, e->reg, ®_val);
- else
+ if (e->reg != SND_SOC_NOPM) {
+ int ret = soc_dapm_read(dapm, e->reg, ®_val);
+ if (ret)
+ return ret;
+ } else {
reg_val = dapm_kcontrol_get_value(kcontrol);
+ }
val = (reg_val >> e->shift_l) & e->mask;
ucontrol->value.enumerated.item[0] = snd_soc_enum_val_to_item(e, val);
@@ -2875,7 +2877,7 @@
ucontrol->value.enumerated.item[1] = val;
}
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_enum_double);
diff --git a/tools/testing/selftests/ipc/Makefile b/tools/testing/selftests/ipc/Makefile
index 5386fd7..74bbefd 100644
--- a/tools/testing/selftests/ipc/Makefile
+++ b/tools/testing/selftests/ipc/Makefile
@@ -1,18 +1,18 @@
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
ifeq ($(ARCH),i386)
- ARCH := X86
+ ARCH := x86
CFLAGS := -DCONFIG_X86_32 -D__i386__
endif
ifeq ($(ARCH),x86_64)
- ARCH := X86
+ ARCH := x86
CFLAGS := -DCONFIG_X86_64 -D__x86_64__
endif
CFLAGS += -I../../../../usr/include/
all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
gcc $(CFLAGS) msgque.c -o msgque_test
else
echo "Not an x86 target, can't build msgque selftest"
diff --git a/tools/testing/selftests/kcmp/Makefile b/tools/testing/selftests/kcmp/Makefile
index d7d6bbe..8aabd82 100644
--- a/tools/testing/selftests/kcmp/Makefile
+++ b/tools/testing/selftests/kcmp/Makefile
@@ -1,11 +1,11 @@
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
ifeq ($(ARCH),i386)
- ARCH := X86
+ ARCH := x86
CFLAGS := -DCONFIG_X86_32 -D__i386__
endif
ifeq ($(ARCH),x86_64)
- ARCH := X86
+ ARCH := x86
CFLAGS := -DCONFIG_X86_64 -D__x86_64__
endif
@@ -15,7 +15,7 @@
CFLAGS += -I../../../../arch/x86/include/
all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
gcc $(CFLAGS) kcmp_test.c -o kcmp_test
else
echo "Not an x86 target, can't build kcmp selftest"
diff --git a/tools/testing/selftests/memfd/Makefile b/tools/testing/selftests/memfd/Makefile
index 6816c49..ad4ab01 100644
--- a/tools/testing/selftests/memfd/Makefile
+++ b/tools/testing/selftests/memfd/Makefile
@@ -1,10 +1,10 @@
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
ifeq ($(ARCH),i386)
- ARCH := X86
+ ARCH := x86
endif
ifeq ($(ARCH),x86_64)
- ARCH := X86
+ ARCH := x86
endif
CFLAGS += -D_FILE_OFFSET_BITS=64
@@ -14,20 +14,20 @@
CFLAGS += -I../../../../include/
all:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
gcc $(CFLAGS) memfd_test.c -o memfd_test
else
echo "Not an x86 target, can't build memfd selftest"
endif
run_tests: all
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
gcc $(CFLAGS) memfd_test.c -o memfd_test
endif
@./memfd_test || echo "memfd_test: [FAIL]"
build_fuse:
-ifeq ($(ARCH),X86)
+ifeq ($(ARCH),x86)
gcc $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
gcc $(CFLAGS) fuse_test.c -o fuse_test
else
diff --git a/drivers/staging/usbip/userspace/.gitignore b/tools/usb/usbip/.gitignore
similarity index 100%
rename from drivers/staging/usbip/userspace/.gitignore
rename to tools/usb/usbip/.gitignore
diff --git a/drivers/staging/usbip/userspace/AUTHORS b/tools/usb/usbip/AUTHORS
similarity index 100%
rename from drivers/staging/usbip/userspace/AUTHORS
rename to tools/usb/usbip/AUTHORS
diff --git a/drivers/staging/usbip/userspace/COPYING b/tools/usb/usbip/COPYING
similarity index 100%
rename from drivers/staging/usbip/userspace/COPYING
rename to tools/usb/usbip/COPYING
diff --git a/drivers/staging/usbip/userspace/INSTALL b/tools/usb/usbip/INSTALL
similarity index 100%
rename from drivers/staging/usbip/userspace/INSTALL
rename to tools/usb/usbip/INSTALL
diff --git a/drivers/staging/usbip/userspace/Makefile.am b/tools/usb/usbip/Makefile.am
similarity index 100%
rename from drivers/staging/usbip/userspace/Makefile.am
rename to tools/usb/usbip/Makefile.am
diff --git a/drivers/staging/usbip/userspace/README b/tools/usb/usbip/README
similarity index 100%
rename from drivers/staging/usbip/userspace/README
rename to tools/usb/usbip/README
diff --git a/drivers/staging/usbip/userspace/autogen.sh b/tools/usb/usbip/autogen.sh
similarity index 100%
rename from drivers/staging/usbip/userspace/autogen.sh
rename to tools/usb/usbip/autogen.sh
diff --git a/drivers/staging/usbip/userspace/cleanup.sh b/tools/usb/usbip/cleanup.sh
similarity index 100%
rename from drivers/staging/usbip/userspace/cleanup.sh
rename to tools/usb/usbip/cleanup.sh
diff --git a/drivers/staging/usbip/userspace/configure.ac b/tools/usb/usbip/configure.ac
similarity index 100%
rename from drivers/staging/usbip/userspace/configure.ac
rename to tools/usb/usbip/configure.ac
diff --git a/drivers/staging/usbip/userspace/doc/usbip.8 b/tools/usb/usbip/doc/usbip.8
similarity index 100%
rename from drivers/staging/usbip/userspace/doc/usbip.8
rename to tools/usb/usbip/doc/usbip.8
diff --git a/drivers/staging/usbip/userspace/doc/usbipd.8 b/tools/usb/usbip/doc/usbipd.8
similarity index 100%
rename from drivers/staging/usbip/userspace/doc/usbipd.8
rename to tools/usb/usbip/doc/usbipd.8
diff --git a/drivers/staging/usbip/userspace/libsrc/Makefile.am b/tools/usb/usbip/libsrc/Makefile.am
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/Makefile.am
rename to tools/usb/usbip/libsrc/Makefile.am
diff --git a/drivers/staging/usbip/userspace/libsrc/list.h b/tools/usb/usbip/libsrc/list.h
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/list.h
rename to tools/usb/usbip/libsrc/list.h
diff --git a/drivers/staging/usbip/userspace/libsrc/names.c b/tools/usb/usbip/libsrc/names.c
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/names.c
rename to tools/usb/usbip/libsrc/names.c
diff --git a/drivers/staging/usbip/userspace/libsrc/names.h b/tools/usb/usbip/libsrc/names.h
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/names.h
rename to tools/usb/usbip/libsrc/names.h
diff --git a/drivers/staging/usbip/userspace/libsrc/sysfs_utils.c b/tools/usb/usbip/libsrc/sysfs_utils.c
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/sysfs_utils.c
rename to tools/usb/usbip/libsrc/sysfs_utils.c
diff --git a/drivers/staging/usbip/userspace/libsrc/sysfs_utils.h b/tools/usb/usbip/libsrc/sysfs_utils.h
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/sysfs_utils.h
rename to tools/usb/usbip/libsrc/sysfs_utils.h
diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_common.c b/tools/usb/usbip/libsrc/usbip_common.c
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/usbip_common.c
rename to tools/usb/usbip/libsrc/usbip_common.c
diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_common.h b/tools/usb/usbip/libsrc/usbip_common.h
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/usbip_common.h
rename to tools/usb/usbip/libsrc/usbip_common.h
diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c b/tools/usb/usbip/libsrc/usbip_host_driver.c
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c
rename to tools/usb/usbip/libsrc/usbip_host_driver.c
diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.h b/tools/usb/usbip/libsrc/usbip_host_driver.h
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/usbip_host_driver.h
rename to tools/usb/usbip/libsrc/usbip_host_driver.h
diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/vhci_driver.c
rename to tools/usb/usbip/libsrc/vhci_driver.c
diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.h b/tools/usb/usbip/libsrc/vhci_driver.h
similarity index 100%
rename from drivers/staging/usbip/userspace/libsrc/vhci_driver.h
rename to tools/usb/usbip/libsrc/vhci_driver.h
diff --git a/drivers/staging/usbip/userspace/src/Makefile.am b/tools/usb/usbip/src/Makefile.am
similarity index 100%
rename from drivers/staging/usbip/userspace/src/Makefile.am
rename to tools/usb/usbip/src/Makefile.am
diff --git a/drivers/staging/usbip/userspace/src/usbip.c b/tools/usb/usbip/src/usbip.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip.c
rename to tools/usb/usbip/src/usbip.c
diff --git a/drivers/staging/usbip/userspace/src/usbip.h b/tools/usb/usbip/src/usbip.h
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip.h
rename to tools/usb/usbip/src/usbip.h
diff --git a/drivers/staging/usbip/userspace/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_attach.c
rename to tools/usb/usbip/src/usbip_attach.c
diff --git a/drivers/staging/usbip/userspace/src/usbip_bind.c b/tools/usb/usbip/src/usbip_bind.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_bind.c
rename to tools/usb/usbip/src/usbip_bind.c
diff --git a/drivers/staging/usbip/userspace/src/usbip_detach.c b/tools/usb/usbip/src/usbip_detach.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_detach.c
rename to tools/usb/usbip/src/usbip_detach.c
diff --git a/drivers/staging/usbip/userspace/src/usbip_list.c b/tools/usb/usbip/src/usbip_list.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_list.c
rename to tools/usb/usbip/src/usbip_list.c
diff --git a/drivers/staging/usbip/userspace/src/usbip_network.c b/tools/usb/usbip/src/usbip_network.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_network.c
rename to tools/usb/usbip/src/usbip_network.c
diff --git a/drivers/staging/usbip/userspace/src/usbip_network.h b/tools/usb/usbip/src/usbip_network.h
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_network.h
rename to tools/usb/usbip/src/usbip_network.h
diff --git a/drivers/staging/usbip/userspace/src/usbip_port.c b/tools/usb/usbip/src/usbip_port.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_port.c
rename to tools/usb/usbip/src/usbip_port.c
diff --git a/drivers/staging/usbip/userspace/src/usbip_unbind.c b/tools/usb/usbip/src/usbip_unbind.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbip_unbind.c
rename to tools/usb/usbip/src/usbip_unbind.c
diff --git a/drivers/staging/usbip/userspace/src/usbipd.c b/tools/usb/usbip/src/usbipd.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/usbipd.c
rename to tools/usb/usbip/src/usbipd.c
diff --git a/drivers/staging/usbip/userspace/src/utils.c b/tools/usb/usbip/src/utils.c
similarity index 100%
rename from drivers/staging/usbip/userspace/src/utils.c
rename to tools/usb/usbip/src/utils.c
diff --git a/drivers/staging/usbip/userspace/src/utils.h b/tools/usb/usbip/src/utils.h
similarity index 100%
rename from drivers/staging/usbip/userspace/src/utils.h
rename to tools/usb/usbip/src/utils.h
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index bf06577..5819a27 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -526,8 +526,10 @@
dev->irq_requested_type |= guest_irq_type;
if (dev->ack_notifier.gsi != -1)
kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
- } else
+ } else {
kvm_free_irq_source_id(kvm, dev->irq_source_id);
+ dev->irq_source_id = -1;
+ }
return r;
}
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index 0df7d4b..714b949 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -61,6 +61,14 @@
return pfn;
}
+static void kvm_unpin_pages(struct kvm *kvm, pfn_t pfn, unsigned long npages)
+{
+ unsigned long i;
+
+ for (i = 0; i < npages; ++i)
+ kvm_release_pfn_clean(pfn + i);
+}
+
int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot)
{
gfn_t gfn, end_gfn;
@@ -123,6 +131,7 @@
if (r) {
printk(KERN_ERR "kvm_iommu_map_address:"
"iommu failed to map pfn=%llx\n", pfn);
+ kvm_unpin_pages(kvm, pfn, page_size);
goto unmap_pages;
}
@@ -134,7 +143,7 @@
return 0;
unmap_pages:
- kvm_iommu_put_pages(kvm, slot->base_gfn, gfn);
+ kvm_iommu_put_pages(kvm, slot->base_gfn, gfn - slot->base_gfn);
return r;
}
@@ -266,14 +275,6 @@
return r;
}
-static void kvm_unpin_pages(struct kvm *kvm, pfn_t pfn, unsigned long npages)
-{
- unsigned long i;
-
- for (i = 0; i < npages; ++i)
- kvm_release_pfn_clean(pfn + i);
-}
-
static void kvm_iommu_put_pages(struct kvm *kvm,
gfn_t base_gfn, unsigned long npages)
{