diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index a2b18f5..34dbc37 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1695,8 +1695,6 @@
 
 	tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
 
-	spin_unlock_irq(tw_dev->host->host_lock);
-
 	tw_dev->num_resets++;
 
 	printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Unit #%d: Command (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, TW_DRIVER, 0x2c, SCpnt->device->id, SCpnt->cmnd[0]);
@@ -1709,7 +1707,6 @@
 
 	retval = SUCCESS;
 out:
-	spin_lock_irq(tw_dev->host->host_lock);
 	return retval;
 } /* End twa_scsi_eh_reset() */
 
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 48f9ece..b6dc576 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -1430,8 +1430,6 @@
 
 	tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
 
-	spin_unlock_irq(tw_dev->host->host_lock);
-
 	tw_dev->num_resets++;
 
 	printk(KERN_WARNING "3w-xxxx: scsi%d: WARNING: Unit #%d: Command (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, SCpnt->device->id, SCpnt->cmnd[0]);
@@ -1444,7 +1442,6 @@
 
 	retval = SUCCESS;
 out:
-	spin_lock_irq(tw_dev->host->host_lock);
 	return retval;
 } /* End tw_scsi_eh_reset() */
 
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 47cf9bd..d151af9 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1991,8 +1991,13 @@
 	       SCp->device->host->host_no, SCp->device->id, SCp->device->lun);
 	scsi_print_command(SCp);
 
+	spin_lock_irq(SCp->device->host->host_lock);
+
 	NCR_700_internal_bus_reset(SCp->device->host);
 	NCR_700_chip_reset(SCp->device->host);
+
+	spin_unlock_irq(SCp->device->host->host_lock);
+
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 15e4b12..9d6040b 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2746,9 +2746,15 @@
 
 	unsigned int id = SCpnt->device->id;
 	struct BusLogic_TargetStatistics *stats = &HostAdapter->TargetStatistics[id];
+	int rc;
+
+	spin_lock_irq(SCpnt->device->host->host_lock);
+
 	BusLogic_IncrementErrorCounter(&stats->HostAdapterResetsRequested);
 
-	return BusLogic_ResetHostAdapter(HostAdapter, false);
+	rc = BusLogic_ResetHostAdapter(HostAdapter, false);
+	spin_unlock_irq(SCpnt->device->host->host_lock);
+	return rc;
 }
 
 /*
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index 7c025b6..b2002ba 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -725,6 +725,9 @@
 static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
 {
 	DEB(printk("NCR53c406a_reset called\n"));
+
+	spin_lock_irq(SCpnt->device->host->host_lock);
+
 	outb(C4_IMG, CONFIG4);	/* Select reg set 0 */
 	outb(CHIP_RESET, CMD_REG);
 	outb(SCSI_NOP, CMD_REG);	/* required after reset */
@@ -732,6 +735,9 @@
 	chip_init();
 
 	rtrc(2);
+
+	spin_unlock_irq(SCpnt->device->host->host_lock);
+
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index ce3c376..f7a1751 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -222,6 +222,9 @@
 {
 	/* FIXME perform bus-specific reset */
 
+	/* FIXME 2: kill this function, and let midlayer fall back
+	   to the same action, calling wd33c93_host_reset() */
+
 	spin_lock_irq(cmd->device->host->host_lock);
 	wd33c93_host_reset(cmd);
 	spin_unlock_irq(cmd->device->host->host_lock);
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index 92698f3..306caf5 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -208,6 +208,9 @@
 static int a3000_bus_reset(Scsi_Cmnd *cmd)
 {
 	/* FIXME perform bus-specific reset */
+	
+	/* FIXME 2: kill this entire function, which should
+	   cause mid-layer to call wd33c93_host_reset anyway? */
 
 	spin_lock_irq(cmd->device->host->host_lock);
 	wd33c93_host_reset(cmd);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index b488434..f7e9c89 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -384,10 +384,13 @@
 					AAC_DRIVERNAME);
 
 
+	spin_lock_irq(host->host_lock);
+
 	aac = (struct aac_dev *)host->hostdata;
 	if (aac_adapter_check_health(aac)) {
 		printk(KERN_ERR "%s: Host adapter appears dead\n", 
 				AAC_DRIVERNAME);
+		spin_unlock_irq(host->host_lock);
 		return -ENODEV;
 	}
 	/*
@@ -418,6 +421,7 @@
 		ssleep(1);
 		spin_lock_irq(host->host_lock);
 	}
+	spin_unlock_irq(host->host_lock);
 	printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
 	return -ETIMEDOUT;
 }
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index f911b51..9ec4641 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -1530,7 +1530,6 @@
 	 * check for timeout, and if we are doing something like this
 	 * we are pretty desperate anyways.
 	 */
-	spin_unlock_irq(SCpnt->device->host->host_lock);
 	ssleep(4);
 	spin_lock_irq(SCpnt->device->host->host_lock);
 
@@ -1574,9 +1573,11 @@
 		}
 	}
 
+	spin_unlock_irq(SCpnt->device->host->host_lock);
 	return SUCCESS;
 
 fail:
+	spin_unlock_irq(SCpnt->device->host->host_lock);
 	return FAILED;
 }
 
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 1e83096..fac091e 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -10845,6 +10845,8 @@
   struct aic_dev_data *aic_dev;
 
   p = (struct aic7xxx_host *) cmd->device->host->hostdata;
+  spin_lock_irq(p->host->host_lock);
+
   aic_dev = AIC_DEV(cmd);
   if(aic7xxx_position(cmd) < p->scb_data->numscbs)
   {
@@ -10884,6 +10886,7 @@
      * longer have it.
      */
     unpause_sequencer(p, FALSE);
+    spin_unlock_irq(p->host->host_lock);
     return SUCCESS;
   }
     
@@ -10907,7 +10910,6 @@
   unpause_sequencer(p, FALSE);
   spin_unlock_irq(p->host->host_lock);
   ssleep(2);
-  spin_lock_irq(p->host->host_lock);
   return SUCCESS;
 }
 
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 3838f88..4772fb3 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2659,6 +2659,8 @@
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
 
+	spin_lock_irq(info->host->host_lock);
+
 	fas216_checkmagic(info);
 
 	printk("scsi%d.%c: %s: resetting host\n",
@@ -2686,6 +2688,7 @@
 
 	fas216_init_chip(info);
 
+	spin_unlock_irq(info->host->host_lock);
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 2fd7287..9cc0015 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -746,7 +746,7 @@
 }
 
 // This version of reset is called by the eh_error_handler
-static int adpt_reset(struct scsi_cmnd* cmd)
+static int __adpt_reset(struct scsi_cmnd* cmd)
 {
 	adpt_hba* pHba;
 	int rcode;
@@ -762,6 +762,17 @@
 	}
 }
 
+static int adpt_reset(struct scsi_cmnd* cmd)
+{
+	int rc;
+
+	spin_lock_irq(cmd->device->host->host_lock);
+	rc = __adpt_reset(cmd);
+	spin_unlock_irq(cmd->device->host->host_lock);
+
+	return rc;
+}
+
 // This version of reset is called by the ioctls and indirectly from eh_error_handler via adpt_reset
 static int adpt_hba_reset(adpt_hba* pHba)
 {
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 8394529..1bb8727 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1948,16 +1948,20 @@
 	       ha->board_name, SCarg->device->channel, SCarg->device->id,
 	       SCarg->device->lun, SCarg->pid);
 
+	spin_lock_irq(shost->host_lock);
+
 	if (SCarg->host_scribble == NULL)
 		printk("%s: reset, pid %ld inactive.\n", ha->board_name, SCarg->pid);
 
 	if (ha->in_reset) {
 		printk("%s: reset, exit, already in reset.\n", ha->board_name);
+		spin_unlock_irq(shost->host_lock);
 		return FAILED;
 	}
 
 	if (wait_on_busy(shost->io_port, MAXLOOP)) {
 		printk("%s: reset, exit, timeout error.\n", ha->board_name);
+		spin_unlock_irq(shost->host_lock);
 		return FAILED;
 	}
 
@@ -2012,6 +2016,7 @@
 
 	if (do_dma(shost->io_port, 0, RESET_PIO)) {
 		printk("%s: reset, cannot reset, timeout error.\n", ha->board_name);
+		spin_unlock_irq(shost->host_lock);
 		return FAILED;
 	}
 
@@ -2024,9 +2029,12 @@
 	ha->in_reset = 1;
 
 	spin_unlock_irq(shost->host_lock);
+
+	/* FIXME: use a sleep instead */
 	time = jiffies;
 	while ((jiffies - time) < (10 * HZ) && limit++ < 200000)
 		udelay(100L);
+
 	spin_lock_irq(shost->host_lock);
 
 	printk("%s: reset, interrupts disabled, loops %d.\n", ha->board_name, limit);
@@ -2076,6 +2084,7 @@
 	else
 		printk("%s: reset, exit.\n", ha->board_name);
 
+	spin_unlock_irq(shost->host_lock);
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 0ee49dc..04a06b7 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -486,8 +486,11 @@
 
 	DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset called pid:%ld target:" " %x lun: %x reason %x\n", cmd->pid, cmd->device->id, cmd->device->lun, cmd->abort_reason));
 
+	spin_lock_irq(host->host_lock);
+
 	if (HD(cmd)->state == RESET) {
 		printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
+		spin_unlock_irq(host->host_lock);
 		return FAILED;
 	}
 
@@ -536,6 +539,8 @@
 
 	HD(cmd)->state = 0;
 
+	spin_unlock_irq(host->host_lock);
+
 	if (success) {		/* hmmm... */
 		DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, success.\n"));
 		return SUCCESS;
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 66990af..d12342f 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -346,6 +346,10 @@
 {
 	/* FIXME perform bus-specific reset */
 
+	/* FIXME 2: shouldn't we no-op this function (return
+	   FAILED), and fall back to host reset function,
+	   wd33c93_host_reset ? */
+
 	spin_lock_irq(cmd->device->host->host_lock);
 	wd33c93_host_reset(cmd);
 	spin_unlock_irq(cmd->device->host->host_lock);
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 0018fb5..b5dc353 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -2237,7 +2237,7 @@
 	return rc;
 }
 
-static int ibmmca_host_reset(Scsi_Cmnd * cmd)
+static int __ibmmca_host_reset(Scsi_Cmnd * cmd)
 {
 	struct Scsi_Host *shpnt;
 	Scsi_Cmnd *cmd_aid;
@@ -2324,6 +2324,18 @@
 	return SUCCESS;
 }
 
+static int ibmmca_host_reset(Scsi_Cmnd * cmd)
+{
+	struct Scsi_Host *shpnt = cmd->device->host;
+	int rc;
+
+	spin_lock_irq(shpnt->host_lock);
+	rc = __ibmmca_host_reset(cmd);
+	spin_unlock_irq(shpnt->host_lock);
+
+	return rc;
+}
+
 static int ibmmca_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *info)
 {
 	int size = capacity;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 83f062e..3d62c9b 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -46,6 +46,7 @@
 #include <linux/slab.h>
 #include <linux/ide.h>
 #include <linux/scatterlist.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/bitops.h>
@@ -1026,11 +1027,13 @@
 		return FAILED;
 	}
 
-	spin_lock_irq(&ide_lock);
+	spin_lock_irq(cmd->device->host->host_lock);
+	spin_lock(&ide_lock);
 
 	if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
 		printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
 		spin_unlock(&ide_lock);
+		spin_unlock_irq(cmd->device->host->host_lock);
 		return FAILED;
 	}
 
@@ -1052,16 +1055,15 @@
 	HWGROUP(drive)->rq = NULL;
 	HWGROUP(drive)->handler = NULL;
 	HWGROUP(drive)->busy = 1;		/* will set this to zero when ide reset finished */
-	spin_unlock_irq(&ide_lock);
+	spin_unlock(&ide_lock);
 
 	ide_do_reset(drive);
 
 	/* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */
 
 	do {
-		set_current_state(TASK_UNINTERRUPTIBLE);
 		spin_unlock_irq(cmd->device->host->host_lock);
-		schedule_timeout(HZ/20);
+		msleep(50);
 		spin_lock_irq(cmd->device->host->host_lock);
 	} while ( HWGROUP(drive)->handler );
 
@@ -1072,6 +1074,7 @@
 		ret = FAILED;
 	}
 
+	spin_unlock_irq(cmd->device->host->host_lock);
 	return ret;
 }
 
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fd8af64..17b106b 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2885,7 +2885,7 @@
  * Return value:
  * 	SUCCESS / FAILED
  **/
-static int ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
+static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg;
 	int rc;
@@ -2905,6 +2905,17 @@
 	return rc;
 }
 
+static int ipr_eh_host_reset(struct scsi_cmnd * cmd)
+{
+	int rc;
+
+	spin_lock_irq(cmd->device->host->host_lock);
+	rc = __ipr_eh_host_reset(cmd);
+	spin_unlock_irq(cmd->device->host->host_lock);
+
+	return rc;
+}
+
 /**
  * ipr_eh_dev_reset - Reset the device
  * @scsi_cmd:	scsi command struct
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 6572e10..6dfcb4f 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -873,7 +873,7 @@
 /*                                                                          */
 /****************************************************************************/
 static int
-ips_eh_reset(Scsi_Cmnd * SC)
+__ips_eh_reset(Scsi_Cmnd * SC)
 {
 	int ret;
 	int i;
@@ -1060,6 +1060,18 @@
 
 }
 
+static int
+ips_eh_reset(Scsi_Cmnd * SC)
+{
+	int rc;
+
+	spin_lock_irq(SC->device->host->host_lock);
+	rc = __ips_eh_reset(SC);
+	spin_unlock_irq(SC->device->host->host_lock);
+
+	return rc;
+}
+
 /****************************************************************************/
 /*                                                                          */
 /* Routine Name: ips_queue                                                  */
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 9a792a54..edd47d1 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -103,6 +103,9 @@
 	struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
 	struct mac53c94_regs __iomem *regs = state->regs;
 	struct dbdma_regs __iomem *dma = state->dma;
+	unsigned long flags;
+
+	spin_lock_irqsave(cmd->device->host->host_lock, flags);
 
 	writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
 	writeb(CMD_SCSI_RESET, &regs->command);	/* assert RST */
@@ -111,6 +114,8 @@
 	udelay(20);
 	mac53c94_init(state);
 	writeb(CMD_NOP, &regs->command);
+
+	spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index f6da46d..b05737a 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1715,9 +1715,12 @@
 	struct mesh_state *ms = (struct mesh_state *) cmd->device->host->hostdata;
 	volatile struct mesh_regs __iomem *mr = ms->mesh;
 	volatile struct dbdma_regs __iomem *md = ms->dma;
+	unsigned long flags;
 
 	printk(KERN_DEBUG "mesh_host_reset\n");
 
+	spin_lock_irqsave(ms->host->host_lock, flags);
+
 	/* Reset the controller & dbdma channel */
 	out_le32(&md->control, (RUN|PAUSE|FLUSH|WAKE) << 16);	/* stop dma */
 	out_8(&mr->exception, 0xff);	/* clear all exception bits */
@@ -1739,6 +1742,7 @@
 	/* Complete pending commands */
 	handle_reset(ms);
 	
+	spin_unlock_irqrestore(ms->host->host_lock, flags);
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
index 5c42021..2fb31ee 100644
--- a/drivers/scsi/mvme147.c
+++ b/drivers/scsi/mvme147.c
@@ -117,6 +117,9 @@
 {
 	/* FIXME perform bus-specific reset */
 
+	/* FIXME 2: kill this function, and let midlayer fallback to 
+	   the same result, calling wd33c93_host_reset() */
+
 	spin_lock_irq(cmd->device->host->host_lock);
 	wd33c93_host_reset(cmd);
 	spin_unlock_irq(cmd->device->host->host_lock);
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 6f15e7a..5159cee 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -3051,11 +3051,14 @@
 	nsp32_msg(KERN_INFO, "Host Reset");	
 	nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
 
+	spin_lock_irq(SCpnt->device->host->host_lock);
+
 	nsp32hw_init(data);
 	nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
 	nsp32_do_bus_reset(data);
 	nsp32_write2(base, IRQ_CONTROL, 0);
 
+	spin_unlock_irq(SCpnt->device->host->host_lock);
 	return SUCCESS;	/* Host reset is succeeded at any time. */
 }
 
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 8457d0d..1667da9 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -627,7 +627,9 @@
 	int port_base = SCpnt->device->host->io_port;
 
 	DEB(printk("SYM53C500_host_reset called\n"));
+	spin_lock_irq(SCpnt->device->host->host_lock);
 	SYM53C500_int_host_reset(port_base);
+	spin_unlock_irq(SCpnt->device->host->host_lock);
 
 	return SUCCESS;
 }
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index d26dbe2..1a4ce1c 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1146,7 +1146,13 @@
 static int
 qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
 {
-	return qla1280_error_action(cmd, ADAPTER_RESET);
+	int rc;
+
+	spin_lock_irq(cmd->device->host->host_lock);
+	rc = qla1280_error_action(cmd, ADAPTER_RESET);
+	spin_unlock_irq(cmd->device->host->host_lock);
+
+	return rc;
 }
 
 static int
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e9091f9..f12a2b6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -815,8 +815,6 @@
 	qla_printk(KERN_INFO, ha,
 	    "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
 
-	spin_unlock_irq(ha->host->host_lock);
-
 	if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 		goto eh_host_reset_lock;
 
@@ -845,8 +843,6 @@
 		ret = SUCCESS;
 
 eh_host_reset_lock:
-	spin_lock_irq(ha->host->host_lock);
-
 	qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
 	    (ret == FAILED) ? "failed" : "succeded");
 
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index be56ee6..ceb4e0c 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1082,9 +1082,7 @@
 	if (!scmd->device->host->hostt->eh_host_reset_handler)
 		return FAILED;
 
-	spin_lock_irqsave(scmd->device->host->host_lock, flags);
 	rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd);
-	spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
 
 	if (rtn == SUCCESS) {
 		if (!scmd->device->host->hostt->skip_settle_delay)
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index ed66828..a5ba2c6 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -311,6 +311,9 @@
 {
 	/* FIXME perform bus-specific reset */
 
+	/* FIXME 2: kill this function, and let midlayer fallback
+	   to the same result, calling wd33c93_host_reset() */
+
 	spin_lock_irq(cmd->device->host->host_lock);
 	wd33c93_host_reset(cmd);
 	spin_unlock_irq(cmd->device->host->host_lock);
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index ca9a04c..ef19adc 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -790,6 +790,9 @@
 	int base;
 	int scsi_id = -1;	
 	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sym53c416_lock, flags);
 
 	/* printk("sym53c416_reset\n"); */
 	base = SCpnt->device->host->io_port;
@@ -801,6 +804,8 @@
 	outb(NOOP | PIO_MODE, base + COMMAND_REG);
 	outb(RESET_SCSI_BUS, base + COMMAND_REG);
 	sym53c416_init(base, scsi_id);
+
+	spin_unlock_irqrestore(&sym53c416_lock, flags);
 	return SUCCESS;
 }
 
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 6af9c18..d76766c 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -889,7 +889,13 @@
 
 static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
 {
-	return sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
+	int rc;
+
+	spin_lock_irq(cmd->device->host->host_lock);
+	rc = sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
+	spin_unlock_irq(cmd->device->host->host_lock);
+
+	return rc;
 }
 
 /*
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index a6a4419..98369ce 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -1417,16 +1417,20 @@
    printk("%s: reset, enter, target %d.%d:%d, pid %ld.\n",
           BN(j), SCarg->device->channel, SCarg->device->id, SCarg->device->lun, SCarg->pid);
 
+   spin_lock_irq(sh[j]->host_lock);
+
    if (SCarg->host_scribble == NULL)
       printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->pid);
 
    if (HD(j)->in_reset) {
       printk("%s: reset, exit, already in reset.\n", BN(j));
+      spin_unlock_irq(sh[j]->host_lock);
       return FAILED;
       }
 
    if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
       printk("%s: reset, exit, timeout error.\n", BN(j));
+      spin_unlock_irq(sh[j]->host_lock);
       return FAILED;
       }
 
@@ -1477,6 +1481,7 @@
 
    if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
       printk("%s: reset, cannot reset, timeout error.\n", BN(j));
+      spin_unlock_irq(sh[j]->host_lock);
       return FAILED;
       }
 
@@ -1538,6 +1543,7 @@
    if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->pid);
    else          printk("%s: reset, exit.\n", BN(j));
 
+   spin_unlock_irq(sh[j]->host_lock);
    return SUCCESS;
 }
 
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index bf4a758..fb54a87 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1586,9 +1586,16 @@
 {
 	Adapter *host = (Adapter *) SCpnt->device->host->hostdata;
 
-	if (wd7000_adapter_reset(host) < 0)
+	spin_unlock_irq(SCpnt->device->host->host_lock);
+
+	if (wd7000_adapter_reset(host) < 0) {
+		spin_unlock_irq(SCpnt->device->host->host_lock);
 		return FAILED;
+	}
+
 	wd7000_enable_intr(host);
+
+	spin_unlock_irq(SCpnt->device->host->host_lock);
 	return SUCCESS;
 }