Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits)
sh: allow building for both r2d boards in same binary.
sh: fix r2d board detection
sh: Discard .exit.text/.exit.data at runtime.
sh: Fix up some section alignments in linker script.
sh: Fix SH-4 DMAC CHCR masking.
sh: Rip out left-over nommu cond syscall cruft.
sh: Make kgdb i-cache flushing less inept.
sh: kgdb section mismatches and tidying.
sh: cleanup struct irqaction initializers.
sh: early_printk tidying.
video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver.
sh: Conditionalize gUSA support.
sh: Follow gUSA preempt changes in __switch_to().
sh: Tidy up gUSA preempt handling.
sh: __copy_user() optimizations for small copies.
sh: clkfwk: Support multi-level clock propagation.
sh: Fix URAM start address on SH7785.
sh: Use boot_cpu_data for CPU probe.
sh: Support extended mode TLB on SH-X3.
sh: Bump MAX_ACTIVE_REGIONS for SH7785.
...
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 54878f0..44982c1 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -118,7 +118,7 @@
config SH_FPU
bool "FPU support"
- depends on CPU_SH4
+ depends on CPU_HAS_FPU
default y
help
Selecting this option will enable support for SH processors that
@@ -178,12 +178,6 @@
config CPU_HAS_MASKREG_IRQ
bool
-config CPU_HAS_INTC_IRQ
- bool
-
-config CPU_HAS_INTC2_IRQ
- bool
-
config CPU_HAS_IPR_IRQ
bool
@@ -205,6 +199,9 @@
config CPU_HAS_DSP
bool
+config CPU_HAS_FPU
+ bool
+
endmenu
menu "Board support"
@@ -258,7 +255,6 @@
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
- select CPU_HAS_INTC2_IRQ
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -309,7 +305,7 @@
config SH_SH03
bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751 && BROKEN
+ depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
@@ -395,11 +391,22 @@
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+config SH_X3PROTO
+ bool "SH-X3 Prototype board"
+ depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+ bool "Magic Panel R2"
+ depends on CPU_SUBTYPE_SH7720
+ help
+ Select Magic Panel R2 if configuring for Magic Panel R2.
+
endmenu
source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
+source "arch/sh/boards/magicpanelr2/Kconfig"
menu "Timer and clock configuration"
@@ -563,10 +570,19 @@
source "kernel/Kconfig.preempt"
-config NODES_SHIFT
- int
- default "1"
- depends on NEED_MULTIPLE_NODES
+config GUSA
+ def_bool y
+ depends on !SMP
+ help
+ This enables support for gUSA (general UserSpace Atomicity).
+ This is the default implementation for both UP and non-ll/sc
+ CPUs, and is used by the libc, amongst others.
+
+ For additional information, design information can be found
+ in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
+
+ This should only be disabled for special cases where alternate
+ atomicity implementations exist.
endmenu
@@ -659,6 +675,17 @@
tristate "SuperHyway Bus support"
depends on CPU_SUBTYPE_SH4_202
+config MAPLE
+ bool "Maple Bus support"
+ depends on SH_DREAMCAST
+ help
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
+
config CF_ENABLER
bool "Compact Flash Enabler support"
depends on SOLUTION_ENGINE || SH_SH03
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 52f6a99..b507b50 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -28,13 +28,17 @@
serial I/O.
config EARLY_SCIF_CONSOLE_PORT
- hex "SCIF port for early console"
+ hex
depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780
+ default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe9800" if CPU_SUBTYPE_SH7206
default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
+ default "0xa4430000" if CPU_SUBTYPE_SH7720
+ default "0xffc30000" if CPU_SUBTYPE_SHX3
default "0xffe80000" if CPU_SH4
+ default "0x00000000"
config EARLY_PRINTK
bool "Early printk support"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 97ac586..a0a2083 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -118,6 +118,7 @@
machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw
+machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
machdir-$(CONFIG_SH_LANDISK) += landisk
machdir-$(CONFIG_SH_TITAN) += titan
@@ -125,6 +126,7 @@
machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206
machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619
machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2
+machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2
incdir-y := $(notdir $(machdir-y))
@@ -135,7 +137,7 @@
# Companion chips
core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
-core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/
+core-$(CONFIG_MFD_SM501) += arch/sh/cchips/voyagergx/
cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2
cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c
index d1c1460..640ca2a 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/hp6xx/hp6xx_apm.c
@@ -20,9 +20,9 @@
#define APM_CRITICAL 10
#define APM_LOW 30
-#define HP680_BATTERY_MAX 875
-#define HP680_BATTERY_MIN 600
-#define HP680_BATTERY_AC_ON 900
+#define HP680_BATTERY_MAX 898
+#define HP680_BATTERY_MIN 486
+#define HP680_BATTERY_AC_ON 1023
#define MODNAME "hp6x0_apm"
@@ -65,7 +65,7 @@
static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
{
- if (!apm_suspended)
+ if (!APM_DISABLED)
apm_queue_event(APM_USER_SUSPEND);
return IRQ_HANDLED;
@@ -91,7 +91,6 @@
static void __exit hp6x0_apm_exit(void)
{
free_irq(HP680_BTN_IRQ, 0);
- apm_get_info = NULL;
}
module_init(hp6x0_apm_init);
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index 7ae7089..2f414ac 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -7,7 +7,7 @@
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
- * Setup code for an HP680 (internal peripherials only)
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
*/
#include <linux/types.h>
#include <linux/init.h>
@@ -19,7 +19,7 @@
#include <asm/cpu/dac.h>
#define SCPCR 0xa4000116
-#define SCPDR 0xa4000136
+#define SCPDR 0xa4000136
/* CF Slot */
static struct resource cf_ide_resources[] = {
@@ -34,7 +34,7 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = 93,
+ .start = 77,
.flags = IORESOURCE_IRQ,
},
};
@@ -46,10 +46,22 @@
.resource = cf_ide_resources,
};
-static struct platform_device *hp6xx_devices[] __initdata = {
- &cf_ide_device,
+static struct platform_device jornadakbd_device = {
+ .name = "jornada680_kbd",
+ .id = -1,
};
+static struct platform_device *hp6xx_devices[] __initdata = {
+ &cf_ide_device,
+ &jornadakbd_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+ /* Gets touchscreen and powerbutton IRQ working */
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
static int __init hp6xx_devices_setup(void)
{
return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
@@ -61,11 +73,11 @@
u16 v;
v = inw(HD64461_STBCR);
- v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
- HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
- HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
- HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST |
- HD64461_STBCR_SAFECKE_IST;
+ v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
+ HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
+ HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
+ HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+ HD64461_STBCR_SAFECKE_IST;
#ifndef CONFIG_HD64461_ENABLER
v |= HD64461_STBCR_SPC1ST;
#endif
@@ -101,6 +113,9 @@
static struct sh_machine_vector mv_hp6xx __initmv = {
.mv_name = "hp6xx",
.mv_setup = hp6xx_setup,
- .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
+ /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
+ .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
.mv_irq_demux = hd64461_irq_demux,
+ /* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+ .mv_init_irq = hp6xx_init_irq,
};
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
new file mode 100644
index 0000000..b0abddc3
--- /dev/null
+++ b/arch/sh/boards/magicpanelr2/Kconfig
@@ -0,0 +1,13 @@
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+ int SH_MAGIC_PANEL_R2_VERSION
+ default "3"
+ help
+ Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
new file mode 100644
index 0000000..7a6d586
--- /dev/null
+++ b/arch/sh/boards/magicpanelr2/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Magic Panel specific parts
+#
+
+obj-y := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/magicpanelr2/setup.c
new file mode 100644
index 0000000..f3b8b07
--- /dev/null
+++ b/arch/sh/boards/magicpanelr2/setup.c
@@ -0,0 +1,394 @@
+/*
+ * linux/arch/sh/boards/magicpanel/setup.c
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Magic Panel Release 2 board setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/magicpanelr2.h>
+#include <asm/heartbeat.h>
+
+#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+
+/* Prefer cmdline over RedBoot */
+static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+/* Wait until reset finished. Timeout is 100ms. */
+static int __init ethernet_reset_finished(void)
+{
+ int i;
+
+ if (LAN9115_READY)
+ return 1;
+
+ for (i = 0; i < 10; ++i) {
+ mdelay(10);
+ if (LAN9115_READY)
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __init reset_ethernet(void)
+{
+ /* PMDR: LAN_RESET=on */
+ CLRBITS_OUTB(0x10, PORT_PMDR);
+
+ udelay(200);
+
+ /* PMDR: LAN_RESET=off */
+ SETBITS_OUTB(0x10, PORT_PMDR);
+}
+
+static void __init setup_chip_select(void)
+{
+ /* CS2: LAN (0x08000000 - 0x0bffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x36db0400, CS2BCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x000003c0, CS2WCR);
+
+ /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS4BCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS4WCR);
+
+ /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS5ABCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS5AWCR);
+
+ /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS5BBCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS5BWCR);
+
+ /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS6ABCR);
+ /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
+ ctrl_outl(0x001009C1, CS6AWCR);
+}
+
+static void __init setup_port_multiplexing(void)
+{
+ /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
+ * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
+ */
+ ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
+
+ /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
+ * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
+ */
+ ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
+
+ /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
+ * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
+ */
+ ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
+
+ /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
+ * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
+ */
+ ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
+
+ /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
+ * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
+ */
+ ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
+
+ /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
+ * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
+ */
+ ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
+
+ /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
+ * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
+ */
+ ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
+
+ /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
+ * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
+ */
+ ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
+
+ /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
+ * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
+ */
+ ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* K7 (x); K6 (x); K5 (x); K4 (x);
+ * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
+ */
+ ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
+
+ /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
+ * L3 TCK; L2 (x); L1 (x); L0 (x);
+ */
+ ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
+ * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
+ * M1 CS5B(CAN3_CS); M0 GPI+(nc);
+ */
+ ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
+
+ /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
+ * LAN_RESET=off, BUZZER=off, LCD_BL=off
+ */
+#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
+ ctrl_outb(0x30, PORT_PMDR);
+#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
+ ctrl_outb(0xF0, PORT_PMDR);
+#else
+#error Unknown revision of PLATFORM_MP_R2
+#endif
+
+ /* P7 (x); P6 (x); P5 (x);
+ * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
+ * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
+ */
+ ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
+ ctrl_outb(0x10, PORT_PPDR);
+
+ /* R7 A25; R6 A24; R5 A23; R4 A22;
+ * R3 A21; R2 A20; R1 A19; R0 A0;
+ */
+ ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
+ * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
+ */
+ ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
+
+ /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
+ * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
+ */
+ ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
+
+ /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
+ * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
+ */
+ ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
+
+ /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
+ * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
+ */
+ ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
+}
+
+static void __init mpr2_setup(char **cmdline_p)
+{
+ __set_io_port_base(0xa0000000);
+
+ /* set Pin Select Register A:
+ * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
+ * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
+ */
+ ctrl_outw(0xAABC, PORT_PSELA);
+ /* set Pin Select Register B:
+ * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
+ * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
+ */
+ ctrl_outw(0x3C00, PORT_PSELB);
+ /* set Pin Select Register C:
+ * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
+ */
+ ctrl_outw(0x0000, PORT_PSELC);
+ /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
+ * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
+ */
+ ctrl_outw(0x0000, PORT_PSELD);
+ /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
+ ctrl_outw(0x0101, PORT_UTRCTL);
+ /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
+ ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+
+ setup_chip_select();
+
+ setup_port_multiplexing();
+
+ reset_ethernet();
+
+ printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
+ CONFIG_SH_MAGIC_PANEL_R2_VERSION);
+
+ if (ethernet_reset_finished() == 0)
+ printk(KERN_WARNING "Ethernet not ready\n");
+}
+
+static struct resource smc911x_resources[] = {
+ [0] = {
+ .start = 0xa8000000,
+ .end = 0xabffffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct heartbeat_data heartbeat_data = {
+ .flags = HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition mpr2_partitions[] = {
+ /* Reserved for bootloader, read-only */
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000UL,
+ .size = MPR2_MTD_BOOTLOADER_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* Reserved for kernel image */
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MPR2_MTD_KERNEL_SIZE,
+ },
+ /* Rest is used for Flash FS */
+ {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x00000000,
+ .end = 0x2000000UL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info mpr2_flash_map = {
+ .name = "Magic Panel R2 Flash",
+ .size = 0x2000000UL,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+ int nr_parts = 0;
+
+ simple_map_init(&mpr2_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes,
+ &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = mpr2_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+/*
+ * Add all resources to the platform_device
+ */
+
+static struct platform_device *mpr2_devices[] __initdata = {
+ &heartbeat_device,
+ &smc911x_device,
+ &flash_device,
+};
+
+
+static int __init mpr2_devices_setup(void)
+{
+ set_mtd_partitions();
+ return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
+}
+device_initcall(mpr2_devices_setup);
+
+/*
+ * Initialize IRQ setting
+ */
+static void __init init_mpr2_IRQ(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
+
+ set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
+ set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
+ set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
+ set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
+ set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
+ set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
+
+ intc_set_priority(32, 13); /* IRQ0 CAN1 */
+ intc_set_priority(33, 13); /* IRQ0 CAN2 */
+ intc_set_priority(34, 13); /* IRQ0 CAN3 */
+ intc_set_priority(35, 6); /* IRQ3 SMSC9115 */
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_mpr2 __initmv = {
+ .mv_name = "mpr2",
+ .mv_setup = mpr2_setup,
+ .mv_init_irq = init_mpr2_IRQ,
+};
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
index 8ce03e0..fede363 100644
--- a/arch/sh/boards/mpc1211/setup.c
+++ b/arch/sh/boards/mpc1211/setup.c
@@ -285,7 +285,7 @@
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa2000000,
- .end = 0xa2000000 + 8 - 1,
+ .end = 0xa2000000,
.flags = IORESOURCE_MEM,
},
};
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index b1d20af..dd26182 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -1,9 +1,10 @@
#
# Makefile for the R7780RP-1 specific parts of the kernel
#
-irqinit-y := irq-r7780rp.o
+irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o
irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o
-obj-y := setup.o irq.o $(irqinit-y)
+irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o irq.o
+obj-y := setup.o $(irqinit-y)
ifneq ($(CONFIG_SH_R7785RP),y)
obj-$(CONFIG_PUSH_SWITCH) += psw.o
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
new file mode 100644
index 0000000..59b47fe
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
@@ -0,0 +1,61 @@
+/*
+ * Renesas Solutions Highlander R7780MP Support.
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2007 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/r7780rp.h>
+
+enum {
+ UNUSED = 0,
+
+ /* board specific interrupt sources */
+ AX88796, /* Ethernet controller */
+ CF, /* Compact Flash */
+ PSW, /* Push Switch */
+ EXT1, /* EXT1n IRQ */
+ EXT4, /* EXT4n IRQ */
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_IRQ(CF, IRQ_CF),
+ INTC_IRQ(PSW, IRQ_PSW),
+ INTC_IRQ(AX88796, IRQ_AX88796),
+ INTC_IRQ(EXT1, IRQ_EXT1),
+ INTC_IRQ(EXT4, IRQ_EXT4),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xa4000000, 0, 16, /* IRLMSK */
+ { 0, 0, 0, 0, CF, 0, 0, 0,
+ 0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+ 0, IRQ_CF, 0, 0,
+ 0, 0, 0, 0,
+ 0, IRQ_EXT4, 0, IRQ_EXT1,
+ 0, IRQ_AX88796, IRQ_PSW,
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
+ NULL, NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_init_irq_r7780mp(void)
+{
+ if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
+ printk(KERN_INFO "Using r7780mp interrupt controller.\n");
+ register_intc_controller(&intc_desc);
+ return irl2irq;
+ }
+
+ return NULL;
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
index f5f3587..fa4a534 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
@@ -9,13 +9,15 @@
* for more details.
*/
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/r7780rp.h>
-void __init highlander_init_irq(void)
+unsigned char * __init highlander_init_irq_r7780rp(void)
{
int i;
for (i = 0; i < 15; i++)
make_r7780rp_irq(i);
+
+ return NULL;
}
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
index dd6ec4c..b2c6a84 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
@@ -1,19 +1,55 @@
/*
- * Renesas Solutions Highlander R7780RP-1 Support.
+ * Renesas Solutions Highlander R7785RP Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2007 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/r7780rp.h>
-void __init highlander_init_irq(void)
+enum {
+ UNUSED = 0,
+
+ /* board specific interrupt sources */
+ AX88796, /* Ethernet controller */
+ CF, /* Compact Flash */
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_IRQ(CF, IRQ_CF),
+ INTC_IRQ(AX88796, IRQ_AX88796),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xa4000010, 0, 16, /* IRLMCR1 */
+ { 0, 0, 0, 0, CF, AX88796, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+ 0, IRQ_CF, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, IRQ_AX88796, 0,
+ 0, 0, 0,
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
+ NULL, NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_init_irq_r7785rp(void)
{
+ if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
+ return NULL;
+
+ printk(KERN_INFO "Using r7785rp interrupt controller.\n");
+
ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
/* Setup the FPGA IRL */
@@ -24,6 +60,6 @@
ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */
- make_r7780rp_irq(1); /* CF card */
- make_r7780rp_irq(10); /* On-board ethernet */
+ register_intc_controller(&intc_desc);
+ return irl2irq;
}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index adb529d..afe9de7 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -19,6 +19,7 @@
#include <asm/machvec.h>
#include <asm/r7780rp.h>
#include <asm/clock.h>
+#include <asm/heartbeat.h>
#include <asm/io.h>
static struct resource r8a66597_usb_host_resources[] = {
@@ -30,8 +31,8 @@
},
[1] = {
.name = "r8a66597_hcd",
- .start = 11, /* irq number */
- .end = 11,
+ .start = IRQ_EXT1, /* irq number */
+ .end = IRQ_EXT1,
.flags = IORESOURCE_IRQ,
},
};
@@ -56,8 +57,8 @@
},
[1] = {
.name = "m66592_udc",
- .start = 9, /* irq number */
- .end = 9,
+ .start = IRQ_EXT4, /* irq number */
+ .end = IRQ_EXT4,
.flags = IORESOURCE_IRQ,
},
};
@@ -85,11 +86,7 @@
.flags = IORESOURCE_MEM,
},
[2] = {
-#ifdef CONFIG_SH_R7780RP
- .start = 4,
-#else
- .start = 1,
-#endif
+ .start = IRQ_CF,
.flags = IORESOURCE_IRQ,
},
};
@@ -108,16 +105,23 @@
},
};
-static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
-
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_OBLED,
- .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .end = PA_OBLED,
.flags = IORESOURCE_MEM,
},
};
+#ifndef CONFIG_SH_R7785RP
+static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
+
+static struct heartbeat_data heartbeat_data = {
+ .bit_pos = heartbeat_bit_pos,
+ .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
+};
+#endif
+
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
@@ -125,7 +129,7 @@
/* R7785RP has a slightly more sensible FPGA.. */
#ifndef CONFIG_SH_R7785RP
.dev = {
- .platform_data = heartbeat_bit_pos,
+ .platform_data = &heartbeat_data,
},
#endif
.num_resources = ARRAY_SIZE(heartbeat_resources),
@@ -217,12 +221,50 @@
pm_power_off = r7780rp_power_off;
}
+static unsigned char irl2irq[HL_NR_IRL];
+
+int highlander_irq_demux(int irq)
+{
+ if (irq >= HL_NR_IRL || !irl2irq[irq])
+ return irq;
+
+ return irl2irq[irq];
+}
+
+void __init highlander_init_irq(void)
+{
+ unsigned char *ucp = NULL;
+
+ do {
+#ifdef CONFIG_SH_R7780MP
+ ucp = highlander_init_irq_r7780mp();
+ if (ucp)
+ break;
+#endif
+#ifdef CONFIG_SH_R7785RP
+ ucp = highlander_init_irq_r7785rp();
+ if (ucp)
+ break;
+#endif
+#ifdef CONFIG_SH_R7780RP
+ highlander_init_irq_r7780rp();
+ ucp = irl2irq;
+ break;
+#endif
+ } while (0);
+
+ if (ucp) {
+ plat_irq_setup_pins(IRQ_MODE_IRL3210);
+ memcpy(irl2irq, ucp, HL_NR_IRL);
+ }
+}
+
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_highlander __initmv = {
.mv_name = "Highlander",
- .mv_nr_irqs = 109,
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
+ .mv_irq_demux = highlander_irq_demux,
};
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/renesas/rts7751r2d/Kconfig
index 7780d1fb..8122a96 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/renesas/rts7751r2d/Kconfig
@@ -1,11 +1,22 @@
if SH_RTS7751R2D
-menu "RTS7751R2D options"
+menu "RTS7751R2D Board Revision"
-config RTS7751R2D_REV11
- bool "RTS7751R2D Rev. 1.1 board support"
+config RTS7751R2D_PLUS
+ bool "R2D-PLUS"
help
- Selecting this option will support version rev. 1.1.
+ Selecting this option will configure the kernel for R2D-PLUS.
+
+ R2D-PLUS is the smaller of the two R2D board versions, equipped
+ with a single PCI slot.
+
+config RTS7751R2D_1
+ bool "R2D-1"
+ help
+ Selecting this option will configure the kernel for R2D-1.
+
+ R2D-1 is the larger of the two R2D board versions, equipped
+ with two PCI slots.
endmenu
endif
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c
index 0bae904..7cc2813 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/renesas/rts7751r2d/irq.c
@@ -1,84 +1,159 @@
/*
* linux/arch/sh/boards/renesas/rts7751r2d/irq.c
*
+ * Copyright (C) 2007 Magnus Damm
* Copyright (C) 2000 Kazumoto Kojima
*
- * Renesas Technology Sales RTS7751R2D Support.
+ * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1.
*
* Modified for RTS7751R2D by
* Atom Create Engineering Co., Ltd. 2002.
*/
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <asm/voyagergx.h>
#include <asm/rts7751r2d.h>
-#if defined(CONFIG_RTS7751R2D_REV11)
-static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0};
-#else
-static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0};
-#endif
+#define R2D_NR_IRL 13
-extern int voyagergx_irq_demux(int irq);
-extern void setup_voyagergx_irq(void);
+enum {
+ UNUSED = 0,
-static void enable_rts7751r2d_irq(unsigned int irq)
-{
- /* Set priority in IPR back to original value */
- ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1);
-}
+ /* board specific interrupt sources (R2D-1 and R2D-PLUS) */
+ EXT, /* EXT_INT0-3 */
+ RTC_T, RTC_A, /* Real Time Clock */
+ AX88796, /* Ethernet controller (R2D-1 board) */
+ KEY, /* Key input (R2D-PLUS board) */
+ SDCARD, /* SD Card */
+ CF_CD, CF_IDE, /* CF Card Detect + CF IDE */
+ SM501, /* SM501 aka Voyager */
+ PCI_INTD_RTL8139, /* Ethernet controller */
+ PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */
+ PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */
+ PCI_INTB_SLOT, /* PCI Slot 3.3v (R2D-1 board) */
+ PCI_INTA_SLOT, /* PCI Slot 3.3v */
+ TP, /* Touch Panel */
+};
-static void disable_rts7751r2d_irq(unsigned int irq)
-{
- /* Set the priority in IPR to 0 */
- ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])),
- IRLCNTR1);
-}
+#ifdef CONFIG_RTS7751R2D_1
+
+/* Vectors for R2D-1 */
+static struct intc_vect vectors_r2d_1[] __initdata = {
+ INTC_IRQ(EXT, IRQ_EXT),
+ INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
+ INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD),
+ INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */
+ INTC_IRQ(SM501, IRQ_VOYAGER),
+ INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
+ INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
+ INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB),
+ INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
+ INTC_IRQ(TP, IRQ_TP),
+};
+
+/* IRLMSK mask register layout for R2D-1 */
+static struct intc_mask_reg mask_registers_r2d_1[] __initdata = {
+ { 0xa4000000, 0, 16, /* IRLMSK */
+ { TP, PCI_INTA_SLOT, PCI_INTB_SLOT,
+ PCI_INTC_PCI1520, PCI_INTD_RTL8139,
+ SM501, CF_IDE, CF_CD, SDCARD, AX88796,
+ RTC_A, RTC_T, 0, 0, 0, EXT } },
+};
+
+/* IRLn to IRQ table for R2D-1 */
+static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
+ IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
+ IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T,
+ IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
+ IRQ_TP,
+};
+
+static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
+ NULL, NULL, mask_registers_r2d_1, NULL, NULL);
+
+#endif /* CONFIG_RTS7751R2D_1 */
+
+#ifdef CONFIG_RTS7751R2D_PLUS
+
+/* Vectors for R2D-PLUS */
+static struct intc_vect vectors_r2d_plus[] __initdata = {
+ INTC_IRQ(EXT, IRQ_EXT),
+ INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
+ INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD),
+ INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE),
+ INTC_IRQ(SM501, IRQ_VOYAGER),
+ INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
+ INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
+ INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB),
+ INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
+ INTC_IRQ(TP, IRQ_TP),
+};
+
+/* IRLMSK mask register layout for R2D-PLUS */
+static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = {
+ { 0xa4000000, 0, 16, /* IRLMSK */
+ { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139,
+ PCI_INTC_PCI1520, PCI_INTD_RTL8139,
+ SM501, CF_IDE, CF_CD, SDCARD, KEY,
+ RTC_A, RTC_T, 0, 0, 0, EXT } },
+};
+
+/* IRLn to IRQ table for R2D-PLUS */
+static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
+ IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
+ IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T,
+ IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
+ IRQ_TP,
+};
+
+static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
+ NULL, NULL, mask_registers_r2d_plus, NULL, NULL);
+
+#endif /* CONFIG_RTS7751R2D_PLUS */
+
+static unsigned char irl2irq[R2D_NR_IRL];
int rts7751r2d_irq_demux(int irq)
{
- return voyagergx_irq_demux(irq);
-}
+ if (irq >= R2D_NR_IRL || !irl2irq[irq])
+ return irq;
-static struct irq_chip rts7751r2d_irq_chip __read_mostly = {
- .name = "rts7751r2d",
- .mask = disable_rts7751r2d_irq,
- .unmask = enable_rts7751r2d_irq,
- .mask_ack = disable_rts7751r2d_irq,
-};
+ return irl2irq[irq];
+}
/*
* Initialize IRQ setting
*/
void __init init_rts7751r2d_IRQ(void)
{
- int i;
+ struct intc_desc *d;
- /* IRL0=KEY Input
- * IRL1=Ethernet
- * IRL2=CF Card
- * IRL3=CF Card Insert
- * IRL4=PCMCIA
- * IRL5=VOYAGER
- * IRL6=RTC Alarm
- * IRL7=RTC Timer
- * IRL8=SD Card
- * IRL9=PCI Slot #1
- * IRL10=PCI Slot #2
- * IRL11=Extention #0
- * IRL12=Extention #1
- * IRL13=Extention #2
- * IRL14=Extention #3
- */
-
- for (i=0; i<15; i++) {
- disable_irq_nosync(i);
- set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip,
- handle_level_irq, "level");
- enable_rts7751r2d_irq(i);
+ switch (ctrl_inw(PA_VERREG) & 0xf0) {
+#ifdef CONFIG_RTS7751R2D_PLUS
+ case 0x10:
+ printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
+ d = &intc_desc_r2d_plus;
+ memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL);
+ break;
+#endif
+#ifdef CONFIG_RTS7751R2D_1
+ case 0x00: /* according to manual */
+ case 0x30: /* in reality */
+ printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
+ d = &intc_desc_r2d_1;
+ memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL);
+ break;
+#endif
+ default:
+ printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
+ ctrl_inw(PA_VERREG));
+ return;
}
+ register_intc_controller(d);
+#ifdef CONFIG_MFD_SM501
setup_voyagergx_irq();
+#endif
}
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 6f7029d..37f2c0b 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -45,20 +45,16 @@
static struct resource cf_ide_resources[] = {
[0] = {
.start = PA_AREA5_IO + 0x1000,
- .end = PA_AREA5_IO + 0x1000 + 0x08 - 1,
+ .end = PA_AREA5_IO + 0x1000 + 0x10 - 0x2,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PA_AREA5_IO + 0x80c,
- .end = PA_AREA5_IO + 0x80c + 0x16 - 1,
+ .end = PA_AREA5_IO + 0x80c,
.flags = IORESOURCE_MEM,
},
[2] = {
-#ifdef CONFIG_RTS7751R2D_REV11
- .start = 1,
-#else
- .start = 2,
-#endif
+ .start = IRQ_CF_IDE,
.flags = IORESOURCE_IRQ,
},
};
@@ -77,12 +73,28 @@
},
};
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_OUTPORT,
+ .end = PA_OUTPORT,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+#ifdef CONFIG_MFD_SM501
static struct plat_serial8250_port uart_platform_data[] = {
{
.membase = (void __iomem *)VOYAGER_UART_BASE,
.mapbase = VOYAGER_UART_BASE,
.iotype = UPIO_MEM,
- .irq = VOYAGER_UART0_IRQ,
+ .irq = IRQ_SM501_U0,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.regshift = 2,
.uartclk = (9600 * 16),
@@ -98,21 +110,6 @@
},
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_OUTPORT,
- .end = PA_OUTPORT + 8 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
static struct resource sm501_resources[] = {
[0] = {
.start = 0x10000000,
@@ -125,7 +122,7 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = 32,
+ .start = IRQ_SM501_CV,
.flags = IORESOURCE_IRQ,
},
};
@@ -137,22 +134,19 @@
.resource = sm501_resources,
};
+#endif /* CONFIG_MFD_SM501 */
+
static struct platform_device *rts7751r2d_devices[] __initdata = {
+#ifdef CONFIG_MFD_SM501
&uart_device,
- &heartbeat_device,
&sm501_device,
+#endif
+ &cf_ide_device,
+ &heartbeat_device,
};
static int __init rts7751r2d_devices_setup(void)
{
- int ret;
-
- if (ctrl_inw(PA_BVERREG) == 0x10) { /* only working on R2D-PLUS */
- ret = platform_device_register(&cf_ide_device);
- if (ret)
- return ret;
- }
-
return platform_add_devices(rts7751r2d_devices,
ARRAY_SIZE(rts7751r2d_devices));
}
@@ -163,6 +157,34 @@
ctrl_outw(0x0001, PA_POWOFF);
}
+static inline unsigned char is_ide_ioaddr(unsigned long addr)
+{
+ return ((cf_ide_resources[0].start <= addr &&
+ addr <= cf_ide_resources[0].end) ||
+ (cf_ide_resources[1].start <= addr &&
+ addr <= cf_ide_resources[1].end));
+}
+
+void rts7751r2d_writeb(u8 b, void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ ctrl_outw((u16)b, tmp);
+ else
+ ctrl_outb(b, tmp);
+}
+
+u8 rts7751r2d_readb(void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ return ctrl_inw(tmp) & 0xff;
+ else
+ return ctrl_inb(tmp);
+}
+
/*
* Initialize the board
*/
@@ -187,12 +209,11 @@
static struct sh_machine_vector mv_rts7751r2d __initmv = {
.mv_name = "RTS7751R2D",
.mv_setup = rts7751r2d_setup,
- .mv_nr_irqs = 72,
-
.mv_init_irq = init_rts7751r2d_IRQ,
.mv_irq_demux = rts7751r2d_irq_demux,
-
-#ifdef CONFIG_USB_SM501
+ .mv_writeb = rts7751r2d_writeb,
+ .mv_readb = rts7751r2d_readb,
+#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD)
.mv_consistent_alloc = voyagergx_consistent_alloc,
.mv_consistent_free = voyagergx_consistent_free,
#endif
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/renesas/x3proto/Makefile
new file mode 100644
index 0000000..983e455
--- /dev/null
+++ b/arch/sh/boards/renesas/x3proto/Makefile
@@ -0,0 +1 @@
+obj-y += setup.o ilsel.o
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/renesas/x3proto/ilsel.c
new file mode 100644
index 0000000..6d4454f
--- /dev/null
+++ b/arch/sh/boards/renesas/x3proto/ilsel.c
@@ -0,0 +1,151 @@
+/*
+ * arch/sh/boards/renesas/x3proto/ilsel.c
+ *
+ * Helper routines for SH-X3 proto board ILSEL.
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/bitmap.h>
+#include <linux/io.h>
+#include <asm/ilsel.h>
+
+/*
+ * ILSEL is split across:
+ *
+ * ILSEL0 - 0xb8100004 [ Levels 1 - 4 ]
+ * ILSEL1 - 0xb8100006 [ Levels 5 - 8 ]
+ * ILSEL2 - 0xb8100008 [ Levels 9 - 12 ]
+ * ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
+ *
+ * With each level being relative to an ilsel_source_t.
+ */
+#define ILSEL_BASE 0xb8100004
+#define ILSEL_LEVELS 15
+
+/*
+ * ILSEL level map, in descending order from the highest level down.
+ *
+ * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
+ * directly to IRLs. As the IRQs are numbered in reverse order relative
+ * to the interrupt level, the level map is carefully managed to ensure a
+ * 1:1 mapping between the bit position and the IRQ number.
+ *
+ * This careful constructions allows ilsel_enable*() to be referenced
+ * directly for hooking up an ILSEL set and getting back an IRQ which can
+ * subsequently be used for internal accounting in the (optional) disable
+ * path.
+ */
+static unsigned long ilsel_level_map;
+
+static inline unsigned int ilsel_offset(unsigned int bit)
+{
+ return ILSEL_LEVELS - bit - 1;
+}
+
+static inline unsigned long mk_ilsel_addr(unsigned int bit)
+{
+ return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
+}
+
+static inline unsigned int mk_ilsel_shift(unsigned int bit)
+{
+ return (ilsel_offset(bit) & 0x3) << 2;
+}
+
+static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
+{
+ unsigned int tmp, shift;
+ unsigned long addr;
+
+ addr = mk_ilsel_addr(bit);
+ shift = mk_ilsel_shift(bit);
+
+ pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
+ __FUNCTION__, bit, addr, shift, set);
+
+ tmp = ctrl_inw(addr);
+ tmp &= ~(0xf << shift);
+ tmp |= set << shift;
+ ctrl_outw(tmp, addr);
+}
+
+/**
+ * ilsel_enable - Enable an ILSEL set.
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ *
+ * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
+ * available interrupt level. Callers should take care to order callsites
+ * noting descending interrupt levels. Aliasing FPGA and external board
+ * IRQs need to use ilsel_enable_fixed().
+ *
+ * The return value is an IRQ number that can later be taken down with
+ * ilsel_disable().
+ */
+int ilsel_enable(ilsel_source_t set)
+{
+ unsigned int bit;
+
+ /* Aliased sources must use ilsel_enable_fixed() */
+ BUG_ON(set > ILSEL_KEY);
+
+ do {
+ bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
+ } while (test_and_set_bit(bit, &ilsel_level_map));
+
+ __ilsel_enable(set, bit);
+
+ return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable);
+
+/**
+ * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ * @level: Interrupt level (1 - 15)
+ *
+ * Enables a given ILSEL source at a fixed interrupt level. Necessary
+ * both for level reservation as well as for aliased sources that only
+ * exist on special ILSEL#s.
+ *
+ * Returns an IRQ number (as ilsel_enable()).
+ */
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
+{
+ unsigned int bit = ilsel_offset(level - 1);
+
+ if (test_and_set_bit(bit, &ilsel_level_map))
+ return -EBUSY;
+
+ __ilsel_enable(set, bit);
+
+ return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
+
+/**
+ * ilsel_disable - Disable an ILSEL set
+ * @irq: Bit position for ILSEL set value (retval from enable routines)
+ *
+ * Disable a previously enabled ILSEL set.
+ */
+void ilsel_disable(unsigned int irq)
+{
+ unsigned long addr;
+ unsigned int tmp;
+
+ addr = mk_ilsel_addr(irq);
+
+ tmp = ctrl_inw(addr);
+ tmp &= ~(0xf << mk_ilsel_shift(irq));
+ ctrl_outw(tmp, addr);
+
+ clear_bit(irq, &ilsel_level_map);
+}
+EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/renesas/x3proto/setup.c
new file mode 100644
index 0000000..abc5b6d
--- /dev/null
+++ b/arch/sh/boards/renesas/x3proto/setup.c
@@ -0,0 +1,136 @@
+/*
+ * arch/sh/boards/renesas/x3proto/setup.c
+ *
+ * Renesas SH-X3 Prototype Board Support.
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/ilsel.h>
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = 0xb8140020,
+ .end = 0xb8140020,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = 0x18000300,
+ .end = 0x18000300 + 0x10 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* Filled in by ilsel */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .resource = smc91x_resources,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = 0x18040000,
+ .end = 0x18080000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "r8a66597_hcd",
+ /* Filled in by ilsel */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL, /* don't use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
+ .resource = r8a66597_usb_host_resources,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+ [0] = {
+ .name = "m66592_udc",
+ .start = 0x18080000,
+ .end = 0x180c0000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "m66592_udc",
+ /* Filled in by ilsel */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+ .name = "m66592_udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL, /* don't use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources),
+ .resource = m66592_usb_peripheral_resources,
+};
+
+static struct platform_device *x3proto_devices[] __initdata = {
+ &heartbeat_device,
+ &smc91x_device,
+ &r8a66597_usb_host_device,
+ &m66592_usb_peripheral_device,
+};
+
+static int __init x3proto_devices_setup(void)
+{
+ r8a66597_usb_host_resources[1].start =
+ r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
+
+ m66592_usb_peripheral_resources[1].start =
+ m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
+
+ smc91x_resources[1].start =
+ smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
+
+ return platform_add_devices(x3proto_devices,
+ ARRAY_SIZE(x3proto_devices));
+}
+device_initcall(x3proto_devices_setup);
+
+static void __init x3proto_init_irq(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+ /* Set ICR0.LVLMODE */
+ ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static struct sh_machine_vector mv_x3proto __initmv = {
+ .mv_name = "x3proto",
+ .mv_init_irq = x3proto_init_irq,
+};
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
index b557273..1308e61 100644
--- a/arch/sh/boards/se/7206/io.c
+++ b/arch/sh/boards/se/7206/io.c
@@ -26,22 +26,24 @@
static inline volatile __u16 *
port2adr(unsigned int port)
{
- if (port >= 0x2000)
+ if (port >= 0x2000 && port < 0x2020)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x300 || port < 0x310)
+ else if (port >= 0x300 && port < 0x310)
return (volatile __u16 *) (PA_SMSC + (port - 0x300));
+
+ return (volatile __u16 *)port;
}
unsigned char se7206_inb(unsigned long port)
{
- return (*port2adr(port))&0xff;
+ return (*port2adr(port)) & 0xff;
}
unsigned char se7206_inb_p(unsigned long port)
{
unsigned long v;
- v = (*port2adr(port))&0xff;
+ v = (*port2adr(port)) & 0xff;
delay();
return v;
}
@@ -51,12 +53,6 @@
return *port2adr(port);;
}
-unsigned int se7206_inl(unsigned long port)
-{
- maybebadio(port);
- return 0;
-}
-
void se7206_outb(unsigned char value, unsigned long port)
{
*(port2adr(port)) = value;
@@ -73,11 +69,6 @@
*port2adr(port) = value;
}
-void se7206_outl(unsigned int value, unsigned long port)
-{
- maybebadio(port);
-}
-
void se7206_insb(unsigned long port, void *addr, unsigned long count)
{
volatile __u16 *p = port2adr(port);
@@ -95,11 +86,6 @@
*ap++ = *p;
}
-void se7206_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
{
volatile __u16 *p = port2adr(port);
@@ -116,8 +102,3 @@
while (count--)
*p = *ap++;
}
-
-void se7206_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
index a074b62..5b3ee08 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/se/7206/setup.c
@@ -6,14 +6,13 @@
* Copyright (C) 2007 Paul Mundt
*
* Hitachi 7206 SolutionEngine Support.
- *
*/
-
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
+#include <asm/heartbeat.h>
static struct resource smc91x_resources[] = {
[0] = {
@@ -37,10 +36,16 @@
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+static struct heartbeat_data heartbeat_data = {
+ .bit_pos = heartbeat_bit_pos,
+ .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
+ .regsize = 32,
+};
+
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
@@ -49,7 +54,7 @@
.name = "heartbeat",
.id = -1,
.dev = {
- .platform_data = heartbeat_bit_pos,
+ .platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
@@ -75,24 +80,18 @@
.mv_nr_irqs = 256,
.mv_inb = se7206_inb,
.mv_inw = se7206_inw,
- .mv_inl = se7206_inl,
.mv_outb = se7206_outb,
.mv_outw = se7206_outw,
- .mv_outl = se7206_outl,
.mv_inb_p = se7206_inb_p,
.mv_inw_p = se7206_inw,
- .mv_inl_p = se7206_inl,
.mv_outb_p = se7206_outb_p,
.mv_outw_p = se7206_outw,
- .mv_outl_p = se7206_outl,
.mv_insb = se7206_insb,
.mv_insw = se7206_insw,
- .mv_insl = se7206_insl,
.mv_outsb = se7206_outsb,
.mv_outsw = se7206_outsw,
- .mv_outsl = se7206_outsl,
.mv_init_irq = init_se7206_IRQ,
};
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
index 360153e..763f6de 100644
--- a/arch/sh/boards/se/7343/irq.c
+++ b/arch/sh/boards/se/7343/irq.c
@@ -99,8 +99,11 @@
*
* We configure IRQ5 as a cascade IRQ.
*/
-static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade",
- NULL, NULL};
+static struct irqaction irq5 = {
+ .handler = no_action,
+ .mask = CPU_MASK_NONE,
+ .name = "IRQ5-cascade",
+};
static struct ipr_data se7343_irq5_ipr_map[] = {
{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
index 8fec155..c9431b3 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/se/7343/setup.c
@@ -33,7 +33,7 @@
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
- .end = PA_LED + 8 - 1,
+ .end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 2962da1..d07a336 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -12,6 +12,7 @@
#include <asm/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
void init_se_IRQ(void);
@@ -90,10 +91,15 @@
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+static struct heartbeat_data heartbeat_data = {
+ .bit_pos = heartbeat_bit_pos,
+ .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
+};
+
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
@@ -102,7 +108,7 @@
.name = "heartbeat",
.id = -1,
.dev = {
- .platform_data = heartbeat_bit_pos,
+ .platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 495fc7e..03b6345 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -18,12 +18,10 @@
#include <asm/io.h>
/* Heartbeat */
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
@@ -31,9 +29,6 @@
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = heartbeat_bit_pos,
- },
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
@@ -109,7 +104,7 @@
ctrl_outl(0x00051001, MSTPCR0);
ctrl_outl(0x00000000, MSTPCR1);
/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
- ctrl_outl(0xffffbfC0, MSTPCR2);
+ ctrl_outl(0xffffbfC0, MSTPCR2);
ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 7873d07..deefbfd 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -13,13 +13,19 @@
#include <asm/machvec.h>
#include <asm/se7751.h>
#include <asm/io.h>
+#include <asm/heartbeat.h>
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+static struct heartbeat_data heartbeat_data = {
+ .bit_pos = heartbeat_bit_pos,
+ .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
+};
+
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
@@ -28,14 +34,13 @@
.name = "heartbeat",
.id = -1,
.dev = {
- .platform_data = heartbeat_bit_pos,
+ .platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *se7751_devices[] __initdata = {
- &smc91x_device,
&heartbeat_device,
};
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
index 8749147..6bd70da 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/se/7780/irq.c
@@ -16,32 +16,6 @@
#include <asm/io.h>
#include <asm/se7780.h>
-static struct intc2_data intc2_irq_table[] = {
- { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
- { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
- { 6, 0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */
- { 8, 0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */
- { 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */
- { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */
- { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */
- { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */
- { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */
- { 0 , 0, 24, 0, 24, 3 }, /* SM501 */
-};
-
-static struct intc2_desc intc2_irq_desc __read_mostly = {
- .prio_base = 0, /* N/A */
- .msk_base = 0xffd00044,
- .mskclr_base = 0xffd00064,
-
- .intc2_data = intc2_irq_table,
- .nr_irqs = ARRAY_SIZE(intc2_irq_table),
-
- .chip = {
- .name = "INTC2-se7780",
- },
-};
-
/*
* Initialize IRQ setting
*/
@@ -68,5 +42,5 @@
/* FPGA + 0x0A */
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
- register_intc2_controller(&intc2_irq_desc);
+ plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
index 723f2fd..76e53b2 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/se/7780/setup.c
@@ -16,12 +16,10 @@
#include <asm/io.h>
/* Heartbeat */
-static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
@@ -29,9 +27,6 @@
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
- .dev = {
- .platform_data = heartbeat_bit_pos,
- },
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index 9c031a8..934ac4f1 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -15,33 +15,9 @@
#include <asm/sh03/sh03.h>
#include <asm/addrspace.h>
-static struct ipr_data ipr_irq_table[] = {
- { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
- { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
- { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
- { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
-};
-
-static unsigned long ipr_offsets[] = {
- INTC_IPRD,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh03",
- },
-};
-
static void __init init_sh03_IRQ(void)
{
- ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
- register_ipr_controller(&ipr_irq_desc);
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
}
extern void *cf_io_base;
@@ -68,7 +44,7 @@
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa0800000,
- .end = 0xa0800000 + 8 - 1,
+ .end = 0xa0800000,
.flags = IORESOURCE_MEM,
},
};
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c
index dfd1245..16e5dae 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/shmin/setup.c
@@ -14,36 +14,12 @@
#define PFC_PHCR 0xa400010eUL
#define INTC_ICR1 0xa4000010UL
-#define INTC_IPRC 0xa4000016UL
-
-static struct ipr_data ipr_irq_table[] = {
- { 32, 0, 0, 0 },
- { 33, 0, 4, 0 },
- { 34, 0, 8, 8 },
- { 35, 0, 12, 0 },
-};
-
-static unsigned long ipr_offsets[] = {
- INTC_IPRC,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-shmin",
- },
-};
static void __init init_shmin_irq(void)
{
ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
- register_ipr_controller(&ipr_irq_desc);
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
}
static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index 84271d8..2b594f6 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -68,37 +68,11 @@
* IRL3 = crypto
*/
-static struct ipr_data ipr_irq_table[] = {
- { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
- { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
- { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
- { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
-};
-
-static unsigned long ipr_offsets[] = {
- INTC_IPRD,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-snapgear",
- },
-};
-
static void __init init_snapgear_IRQ(void)
{
- /* enable individual interrupt mode for externals */
- ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-
printk("Setup SnapGear IRQ/IPR ...\n");
-
- register_ipr_controller(&ipr_irq_desc);
+ /* enable individual interrupt mode for externals */
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
}
/*
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
index 606d25a..5de3b2a 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/titan/setup.c
@@ -12,38 +12,10 @@
#include <asm/titan.h>
#include <asm/io.h>
-static struct ipr_data ipr_irq_table[] = {
- /* IRQ, IPR idx, shift, prio */
- { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */
- { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */
- { TITAN_IRQ_MPCIA, 3, 4, 8 }, /* mPCI A (top) */
- { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */
-};
-
-static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */
- 0xffd00004UL, /* 0: IPRA */
- 0xffd00008UL, /* 1: IPRB */
- 0xffd0000cUL, /* 2: IPRC */
- 0xffd00010UL, /* 3: IPRD */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-titan",
- },
-};
static void __init init_titan_irq(void)
{
/* enable individual interrupt mode for externals */
- ipr_irq_enable_irlm();
- /* register ipr irqs */
- register_ipr_controller(&ipr_irq_desc);
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
}
static struct sh_machine_vector mv_titan __initmv = {
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 2e516e9..7892361e 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -1,18 +1,5 @@
menu "Companion Chips"
-config VOYAGERGX
- bool "VoyagerGX chip support"
- depends on SH_RTS7751R2D
- help
- Selecting this option will support Silicon Motion, Inc. SM501.
- Designed to complement needs for the embedded industry, it
- provides video and 2D capability. To reduce system cost a
- wide variety of include I/O is supported, including analog RGB
- and digital LCD Panel interface, 8-bit parallel interface, USB,
- UART, IrDA, Zoom Video, AC97 or I2S, SSP, PWM, and I2C. There
- are additional GPIO bits that can be used to interface to
- external as well.
-
config HD6446X_SERIES
bool
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
index 97f6512..f1a4a07 100644
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ b/arch/sh/cchips/hd6446x/hd64461.c
@@ -14,6 +14,9 @@
#include <asm/irq.h>
#include <asm/hd64461.h>
+/* This belongs in cpu specific */
+#define INTC_ICR1 0xA4140010UL
+
static void disable_hd64461_irq(unsigned int irq)
{
unsigned short nimr;
@@ -121,10 +124,15 @@
}
}
}
- return __irq_demux(irq);
+ return irq;
}
-static struct irqaction irq0 = { hd64461_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64461", NULL, NULL };
+static struct irqaction irq0 = {
+ .handler = hd64461_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "HD64461",
+};
int __init setup_hd64461(void)
{
@@ -143,6 +151,7 @@
#endif
outw(0xffff, HD64461_NIMR);
+ /* IRQ 80 -> 95 belongs to HD64461 */
for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) {
irq_desc[i].chip = &hd64461_irq_type;
}
diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c
index d126e1f..5cef0db 100644
--- a/arch/sh/cchips/hd6446x/hd64465/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64465/setup.c
@@ -147,7 +147,12 @@
return irq;
}
-static struct irqaction irq0 = { hd64465_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64465", NULL, NULL};
+static struct irqaction irq0 = {
+ .handler = hd64465_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "HD64465",
+};
static int __init setup_hd64465(void)
diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c
index d70e5c8..ade3038 100644
--- a/arch/sh/cchips/voyagergx/irq.c
+++ b/arch/sh/cchips/voyagergx/irq.c
@@ -23,149 +23,79 @@
#include <asm/voyagergx.h>
#include <asm/rts7751r2d.h>
-static void disable_voyagergx_irq(unsigned int irq)
-{
- unsigned long val;
- unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
+enum {
+ UNUSED = 0,
- pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
- val = readl((void __iomem *)VOYAGER_INT_MASK);
- val &= ~mask;
- writel(val, (void __iomem *)VOYAGER_INT_MASK);
-}
-
-static void enable_voyagergx_irq(unsigned int irq)
-{
- unsigned long val;
- unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
-
- pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
- val = readl((void __iomem *)VOYAGER_INT_MASK);
- val |= mask;
- writel(val, (void __iomem *)VOYAGER_INT_MASK);
-}
-
-static void mask_and_ack_voyagergx(unsigned int irq)
-{
- disable_voyagergx_irq(irq);
-}
-
-static void end_voyagergx_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_voyagergx_irq(irq);
-}
-
-static unsigned int startup_voyagergx_irq(unsigned int irq)
-{
- enable_voyagergx_irq(irq);
- return 0;
-}
-
-static void shutdown_voyagergx_irq(unsigned int irq)
-{
- disable_voyagergx_irq(irq);
-}
-
-static struct hw_interrupt_type voyagergx_irq_type = {
- .typename = "VOYAGERGX-IRQ",
- .startup = startup_voyagergx_irq,
- .shutdown = shutdown_voyagergx_irq,
- .enable = enable_voyagergx_irq,
- .disable = disable_voyagergx_irq,
- .ack = mask_and_ack_voyagergx,
- .end = end_voyagergx_irq,
+ /* voyager specific interrupt sources */
+ UP, G54, G53, G52, G51, G50, G49, G48,
+ I2C, PW, DMA, PCI, I2S, AC, US,
+ U1, U0, CV, MC, S1, S0,
+ UH, TWOD, ZD, PV, CI,
};
-static irqreturn_t voyagergx_interrupt(int irq, void *dev_id)
+static struct intc_vect vectors[] __initdata = {
+ INTC_IRQ(UP, IRQ_SM501_UP), INTC_IRQ(G54, IRQ_SM501_G54),
+ INTC_IRQ(G53, IRQ_SM501_G53), INTC_IRQ(G52, IRQ_SM501_G52),
+ INTC_IRQ(G51, IRQ_SM501_G51), INTC_IRQ(G50, IRQ_SM501_G50),
+ INTC_IRQ(G49, IRQ_SM501_G49), INTC_IRQ(G48, IRQ_SM501_G48),
+ INTC_IRQ(I2C, IRQ_SM501_I2C), INTC_IRQ(PW, IRQ_SM501_PW),
+ INTC_IRQ(DMA, IRQ_SM501_DMA), INTC_IRQ(PCI, IRQ_SM501_PCI),
+ INTC_IRQ(I2S, IRQ_SM501_I2S), INTC_IRQ(AC, IRQ_SM501_AC),
+ INTC_IRQ(US, IRQ_SM501_US), INTC_IRQ(U1, IRQ_SM501_U1),
+ INTC_IRQ(U0, IRQ_SM501_U0), INTC_IRQ(CV, IRQ_SM501_CV),
+ INTC_IRQ(MC, IRQ_SM501_MC), INTC_IRQ(S1, IRQ_SM501_S1),
+ INTC_IRQ(S0, IRQ_SM501_S0), INTC_IRQ(UH, IRQ_SM501_UH),
+ INTC_IRQ(TWOD, IRQ_SM501_2D), INTC_IRQ(ZD, IRQ_SM501_ZD),
+ INTC_IRQ(PV, IRQ_SM501_PV), INTC_IRQ(CI, IRQ_SM501_CI),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { VOYAGER_INT_MASK, 0, 32, /* "Interrupt Mask", MMIO_base + 0x30 */
+ { UP, G54, G53, G52, G51, G50, G49, G48,
+ I2C, PW, 0, DMA, PCI, I2S, AC, US,
+ 0, 0, U1, U0, CV, MC, S1, S0,
+ 0, UH, 0, 0, TWOD, ZD, PV, CI } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors,
+ NULL, NULL, mask_registers, NULL, NULL);
+
+static unsigned int voyagergx_stat2irq[32] = {
+ IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D,
+ 0, 0, IRQ_SM501_UH, 0,
+ IRQ_SM501_S0, IRQ_SM501_S1, IRQ_SM501_MC, IRQ_SM501_CV,
+ IRQ_SM501_U0, IRQ_SM501_U1, 0, 0,
+ IRQ_SM501_US, IRQ_SM501_AC, IRQ_SM501_I2S, IRQ_SM501_PCI,
+ IRQ_SM501_DMA, 0, IRQ_SM501_PW, IRQ_SM501_I2C,
+ IRQ_SM501_G48, IRQ_SM501_G49, IRQ_SM501_G50, IRQ_SM501_G51,
+ IRQ_SM501_G52, IRQ_SM501_G53, IRQ_SM501_G54, IRQ_SM501_UP
+};
+
+static void voyagergx_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- printk(KERN_INFO
- "VoyagerGX: spurious interrupt, status: 0x%x\n",
- (unsigned int)readl((void __iomem *)INT_STATUS));
- return IRQ_HANDLED;
-}
+ unsigned long intv = ctrl_inl(INT_STATUS);
+ struct irq_desc *ext_desc;
+ unsigned int ext_irq;
+ unsigned int k = 0;
-static struct {
- int (*func)(int, void *);
- void *dev;
-} voyagergx_demux[VOYAGER_IRQ_NUM];
-
-void voyagergx_register_irq_demux(int irq,
- int (*demux)(int irq, void *dev), void *dev)
-{
- voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux;
- voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev;
-}
-
-void voyagergx_unregister_irq_demux(int irq)
-{
- voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0;
-}
-
-int voyagergx_irq_demux(int irq)
-{
-
- if (irq == IRQ_VOYAGER ) {
- unsigned long i = 0, bit __attribute__ ((unused));
- unsigned long val = readl((void __iomem *)INT_STATUS);
-
- if (val & (1 << 1))
- i = 1;
- else if (val & (1 << 2))
- i = 2;
- else if (val & (1 << 6))
- i = 6;
- else if (val & (1 << 10))
- i = 10;
- else if (val & (1 << 11))
- i = 11;
- else if (val & (1 << 12))
- i = 12;
- else if (val & (1 << 17))
- i = 17;
- else
- printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val);
- pr_debug("voyagergx_irq_demux %ld \n", i);
- if (i < VOYAGER_IRQ_NUM) {
- irq = VOYAGER_IRQ_BASE + i;
- if (voyagergx_demux[i].func != 0)
- irq = voyagergx_demux[i].func(irq,
- voyagergx_demux[i].dev);
+ while (intv) {
+ ext_irq = voyagergx_stat2irq[k];
+ if (ext_irq && (intv & 1)) {
+ ext_desc = irq_desc + ext_irq;
+ handle_level_irq(ext_irq, ext_desc);
}
+ intv >>= 1;
+ k++;
}
- return irq;
}
-static struct irqaction irq0 = {
- .name = "voyagergx",
- .handler = voyagergx_interrupt,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
-};
-
void __init setup_voyagergx_irq(void)
{
- int i, flag;
-
- printk(KERN_INFO "VoyagerGX configured at 0x%x on irq %d(mapped into %d to %d)\n",
- VOYAGER_BASE,
+ printk(KERN_INFO "VoyagerGX on irq %d (mapped into %d to %d)\n",
IRQ_VOYAGER,
VOYAGER_IRQ_BASE,
VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1);
- for (i=0; i<VOYAGER_IRQ_NUM; i++) {
- flag = 0;
- switch (VOYAGER_IRQ_BASE + i) {
- case VOYAGER_USBH_IRQ:
- case VOYAGER_8051_IRQ:
- case VOYAGER_UART0_IRQ:
- case VOYAGER_UART1_IRQ:
- case VOYAGER_AC97_IRQ:
- flag = 1;
- }
- if (flag == 1)
- irq_desc[VOYAGER_IRQ_BASE + i].chip = &voyagergx_irq_type;
- }
-
- setup_irq(IRQ_VOYAGER, &irq0);
+ register_intc_controller(&intc_desc);
+ set_irq_chained_handler(IRQ_VOYAGER, voyagergx_irq_demux);
}
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 3fdd270..5772878 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Sat Jul 7 03:47:45 2007
+# Linux kernel version: 2.6.23-rc7
+# Fri Sep 21 15:46:27 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -18,30 +18,26 @@
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
@@ -64,7 +60,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -74,24 +69,17 @@
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -112,7 +100,6 @@
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -120,6 +107,7 @@
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
CONFIG_CPU_SUBTYPE_SH7091=y
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -134,7 +122,6 @@
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -177,7 +164,9 @@
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -185,12 +174,11 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
# Board support
@@ -270,6 +258,7 @@
#
# Bus options
#
+CONFIG_MAPLE=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
@@ -368,6 +357,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -380,27 +370,10 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -411,14 +384,11 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -426,12 +396,9 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
#
@@ -444,26 +411,16 @@
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
@@ -472,10 +429,6 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
@@ -520,15 +473,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -536,6 +481,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -606,10 +552,6 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -631,10 +573,6 @@
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
@@ -644,11 +582,8 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
@@ -673,6 +608,7 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
@@ -699,7 +635,6 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_PVR2=y
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -725,6 +660,7 @@
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
@@ -749,16 +685,10 @@
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -773,32 +703,8 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
#
@@ -815,6 +721,11 @@
#
#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -890,7 +801,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -935,10 +845,6 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
# CONFIG_CRYPTO is not set
#
@@ -949,6 +855,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index b931d9b..756d38d 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,37 +1,47 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:10:06 2006
+# Linux kernel version: 2.6.23-rc4
+# Tue Sep 11 19:42:44 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_USER_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
@@ -44,27 +54,25 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -82,55 +90,17 @@
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-CONFIG_SH_HP6XX=y
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
CONFIG_CPU_SUBTYPE_SH7709=y
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -139,66 +109,78 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_START=0x0d000000
CONFIG_MEMORY_SIZE=0x00400000
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
CONFIG_SH_ADC=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_PINT_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
#
-# Timer support
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+CONFIG_SH_HP6XX=y
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=22110000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU Frequency scaling
@@ -208,6 +190,7 @@
#
# DMA support
#
+CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -223,14 +206,21 @@
CONFIG_HD64461_ENABLER=y
#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -240,14 +230,13 @@
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options
#
CONFIG_ISA=y
-# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -266,14 +255,9 @@
CONFIG_PCMCIA_PROBE=y
#
-# PCI Hotplug Support
-#
-
-#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
@@ -282,8 +266,9 @@
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_APM_EMULATION=y
#
# Networking
@@ -301,109 +286,76 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_ATA is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
-# Old CD-ROM drivers (not SCSI, not IDE)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# Multi-device support (RAID and LVM)
+# SCSI Transports
#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -411,19 +363,17 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_TSDEV=y
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
@@ -436,9 +386,12 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HP6XX=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -447,6 +400,7 @@
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -476,46 +430,29 @@
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_SH_SCI is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
-#
-
-#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -523,48 +460,55 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
#
-# Dallas's 1-wire bus
+# Multifunction device drivers
#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_HIT=y
# CONFIG_FB_VIRTUAL is not set
@@ -575,6 +519,7 @@
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
@@ -587,79 +532,49 @@
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_SOUND_SH_DAC_AUDIO=y
-CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL=1
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# LED drivers
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
#
#
-# LED Triggers
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# InfiniBand support
+# on-CPU RTC drivers
#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_SH=y
#
# DMA Engine support
@@ -675,16 +590,23 @@
#
#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -705,7 +627,7 @@
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -755,7 +677,7 @@
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -799,34 +721,73 @@
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_KGDB is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
new file mode 100644
index 0000000..f8398a5
--- /dev/null
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -0,0 +1,925 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc2
+# Fri Aug 17 12:15:16 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_ADC=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SH_MAGIC_PANEL_R2=y
+
+#
+# Magic Panel R2 options
+#
+CONFIG_SH_MAGIC_PANEL_R2_VERSION=3
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=24000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_SOLUTIONENGINE is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=48
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_BIND34=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_DEBUG_KOBJECT=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+CONFIG_SH_KGDB=y
+
+#
+# KGDB configuration options
+#
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+# CONFIG_KGDB_NMI is not set
+CONFIG_KGDB_SYSRQ=y
+
+#
+# Serial port setup
+#
+CONFIG_KGDB_DEFPORT=0
+CONFIG_KGDB_DEFBAUD=115200
+CONFIG_KGDB_DEFPARITY_N=y
+# CONFIG_KGDB_DEFPARITY_E is not set
+# CONFIG_KGDB_DEFPARITY_O is not set
+CONFIG_KGDB_DEFBITS_8=y
+# CONFIG_KGDB_DEFBITS_7 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
similarity index 85%
rename from arch/sh/configs/rts7751r2d_defconfig
rename to arch/sh/configs/rts7751r2d1_defconfig
index b64f73b..2dc754e 100644
--- a/arch/sh/configs/rts7751r2d_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,46 +1,47 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Thu Mar 1 16:42:40 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug 14 18:04:44 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -54,31 +55,29 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -96,61 +95,16 @@
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-CONFIG_SH_RTS7751R2D=y
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -159,35 +113,30 @@
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -197,17 +146,19 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -215,7 +166,6 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC_IRQ=y
@@ -223,17 +173,31 @@
CONFIG_CPU_HAS_PTEA=y
#
-# Timer support
+# Board support
#
-CONFIG_SH_TMU=y
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+CONFIG_SH_RTS7751R2D=y
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
#
# RTS7751R2D options
#
-CONFIG_RTS7751R2D_REV11=y
+# CONFIG_RTS7751R2D_PLUS is not set
+CONFIG_RTS7751R2D_1=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU Frequency scaling
@@ -244,19 +208,15 @@
# DMA support
#
# CONFIG_SH_DMA is not set
-# CONFIG_NR_ONCHIP_DMA_CHANNELS is not set
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# Companion Chips
#
-CONFIG_VOYAGERGX=y
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
#
# Additional SuperH Device Drivers
#
+CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
@@ -268,7 +228,7 @@
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -289,15 +249,12 @@
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -307,15 +264,9 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -323,7 +274,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -360,20 +310,8 @@
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -399,8 +337,17 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -413,31 +360,10 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -449,19 +375,13 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -469,6 +389,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -490,6 +411,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -497,12 +419,8 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,7 +430,6 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -535,10 +452,6 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
@@ -561,6 +474,7 @@
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
@@ -593,10 +507,6 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
#
@@ -610,35 +520,18 @@
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
@@ -647,10 +540,6 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
@@ -677,10 +566,7 @@
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
@@ -691,61 +577,26 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -756,15 +607,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -772,6 +615,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -788,6 +632,7 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -828,32 +673,15 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -861,21 +689,24 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -887,22 +718,31 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -910,14 +750,13 @@
# CONFIG_FB_TILEBLITTING is not set
#
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -932,7 +771,10 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
@@ -941,14 +783,11 @@
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -1048,35 +887,34 @@
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
+CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
-# SoC audio support
+# SUPERH devices
+#
+
+#
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
+# SoC Audio support for SuperH
+#
+
+#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1090,37 +928,9 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1134,18 +944,28 @@
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
@@ -1159,12 +979,9 @@
#
#
-# Auxiliary Display support
+# Userspace I/O
#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
#
# File systems
@@ -1247,7 +1064,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1321,7 +1137,6 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1334,10 +1149,6 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
# CONFIG_CRYPTO is not set
#
@@ -1346,8 +1157,11 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
similarity index 85%
copy from arch/sh/configs/rts7751r2d_defconfig
copy to arch/sh/configs/rts7751r2dplus_defconfig
index b64f73b..4ff5a75 100644
--- a/arch/sh/configs/rts7751r2d_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,46 +1,47 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Thu Mar 1 16:42:40 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug 14 16:33:08 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -54,31 +55,29 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -96,61 +95,16 @@
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-CONFIG_SH_RTS7751R2D=y
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -159,35 +113,30 @@
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -197,17 +146,19 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -215,7 +166,6 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC_IRQ=y
@@ -223,17 +173,31 @@
CONFIG_CPU_HAS_PTEA=y
#
-# Timer support
+# Board support
#
-CONFIG_SH_TMU=y
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+CONFIG_SH_RTS7751R2D=y
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
#
# RTS7751R2D options
#
-CONFIG_RTS7751R2D_REV11=y
+CONFIG_RTS7751R2D_PLUS=y
+# CONFIG_RTS7751R2D_1 is not set
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU Frequency scaling
@@ -244,19 +208,15 @@
# DMA support
#
# CONFIG_SH_DMA is not set
-# CONFIG_NR_ONCHIP_DMA_CHANNELS is not set
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# Companion Chips
#
-CONFIG_VOYAGERGX=y
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
#
# Additional SuperH Device Drivers
#
+CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
@@ -268,7 +228,7 @@
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -289,15 +249,12 @@
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -307,15 +264,9 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
# Networking
#
CONFIG_NET=y
@@ -323,7 +274,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -360,20 +310,8 @@
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -399,8 +337,17 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -413,31 +360,10 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -449,19 +375,13 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
# CONFIG_IDE is not set
#
@@ -469,6 +389,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -490,6 +411,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -497,12 +419,8 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,7 +430,6 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -535,10 +452,6 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
@@ -561,6 +474,7 @@
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
@@ -593,10 +507,6 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
#
@@ -610,35 +520,18 @@
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
@@ -647,10 +540,6 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
@@ -677,10 +566,7 @@
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
@@ -691,61 +577,26 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -756,15 +607,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -772,6 +615,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -788,6 +632,7 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -828,32 +673,15 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -861,21 +689,24 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -887,22 +718,31 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -910,14 +750,13 @@
# CONFIG_FB_TILEBLITTING is not set
#
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -932,7 +771,10 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
@@ -941,14 +783,11 @@
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -1048,35 +887,34 @@
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
+CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
-# SoC audio support
+# SUPERH devices
+#
+
+#
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
+# SoC Audio support for SuperH
+#
+
+#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1090,37 +928,9 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1134,18 +944,28 @@
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_SH=y
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
@@ -1159,12 +979,9 @@
#
#
-# Auxiliary Display support
+# Userspace I/O
#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
#
# File systems
@@ -1247,7 +1064,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1321,7 +1137,6 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1334,10 +1149,6 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
# CONFIG_CRYPTO is not set
#
@@ -1346,8 +1157,11 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index f2f2a3c..0d0cda90 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:37:46 2007
+# Linux kernel version: 2.6.23-rc4
+# Thu Sep 13 16:40:16 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -17,25 +17,22 @@
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
@@ -60,23 +57,17 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -98,7 +89,6 @@
CONFIG_CPU_SH2A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -106,6 +96,7 @@
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -119,7 +110,7 @@
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -136,15 +127,16 @@
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
@@ -155,7 +147,9 @@
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -163,8 +157,6 @@
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
#
# Board support
@@ -185,12 +177,23 @@
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_SH_CPU_FREQ is not set
#
# DMA support
#
-# CONFIG_SH_DMA is not set
#
# Companion Chips
@@ -199,17 +202,17 @@
#
# Additional SuperH Device Drivers
#
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
-CONFIG_HZ_100=y
+# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
@@ -221,11 +224,13 @@
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
#
# Bus options
#
+# CONFIG_CF_ENABLER is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
@@ -315,6 +320,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -325,11 +331,9 @@
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
@@ -411,31 +415,16 @@
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
@@ -443,27 +432,18 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
@@ -483,15 +463,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -499,6 +471,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -546,19 +519,11 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
@@ -567,11 +532,8 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
@@ -596,25 +558,21 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -625,31 +583,7 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
#
@@ -666,6 +600,11 @@
#
#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -736,7 +675,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -752,12 +690,12 @@
#
# Distributed Lock Manager
#
-# CONFIG_DLM is not set
#
# Profiling support
#
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
#
# Kernel hacking
@@ -768,19 +706,41 @@
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
# CONFIG_CRYPTO is not set
#
@@ -791,6 +751,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 219bad5..a794c08 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Wed Jun 20 14:09:27 2007
+# Linux kernel version: 2.6.23-rc7
+# Fri Sep 21 19:07:30 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -13,32 +13,33 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -63,34 +64,26 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -113,7 +106,6 @@
CONFIG_CPU_SHX3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -121,6 +113,7 @@
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -135,7 +128,6 @@
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
CONFIG_CPU_SUBTYPE_SHX3=y
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -148,12 +140,15 @@
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_MAX_ACTIVE_REGIONS=6
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -163,12 +158,14 @@
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -178,24 +175,25 @@
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_CACHE_WRITEBACK is not set
+# CONFIG_CACHE_WRITETHROUGH is not set
+CONFIG_CACHE_OFF=y
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_SH_FPU is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
+CONFIG_SH_FPU=y
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
#
# Board support
#
+CONFIG_SH_X3PROTO=y
#
# Timer and clock configuration
@@ -204,13 +202,25 @@
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=50000000
CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
+# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
@@ -237,6 +247,7 @@
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
@@ -249,7 +260,7 @@
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
#
# Bus options
@@ -265,12 +276,106 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
#
# Networking
#
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -285,37 +390,21 @@
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
@@ -323,6 +412,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -351,73 +441,54 @@
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# ISDN subsystem
+# Wireless LAN
#
-
-#
-# Telephony Support
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
@@ -442,19 +513,18 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# IPMI
+# Watchdog Device Drivers
#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SH_WDT is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
@@ -463,11 +533,8 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
@@ -479,6 +546,7 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
@@ -491,24 +559,18 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -517,68 +579,32 @@
#
# USB Gadget Support
#
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
@@ -594,6 +620,11 @@
#
#
+# Userspace I/O
+#
+CONFIG_UIO=m
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -612,6 +643,7 @@
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -667,6 +699,17 @@
# CONFIG_UFS_FS is not set
#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
@@ -678,6 +721,11 @@
# CONFIG_NLS is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
CONFIG_PROFILING=y
@@ -687,31 +735,28 @@
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
+# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
-CONFIG_LOCKDEP=y
-CONFIG_DEBUG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
@@ -735,10 +780,6 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
# CONFIG_CRYPTO is not set
#
@@ -749,6 +790,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index ee71143..4e711a0 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -12,6 +12,7 @@
config NR_ONCHIP_DMA_CHANNELS
int
depends on SH_DMA
+ default "6" if CPU_SUBTYPE_SH7720
default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
default "12" if CPU_SUBTYPE_SH7780
default "4"
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 06ed060..958bac1 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -24,13 +24,19 @@
DMTE1_IRQ,
DMTE2_IRQ,
DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
DMTE4_IRQ,
DMTE5_IRQ,
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780)
DMTE6_IRQ,
- DMTE7_IRQ,
+ DMTE7_IRQ,
#endif
};
@@ -196,7 +202,8 @@
return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
}
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780)
#define dmaor_read_reg() ctrl_inw(DMAOR)
#define dmaor_write_reg(data) ctrl_outw(data, DMAOR)
#else
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index 10c1828..b76a14f 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -24,24 +24,44 @@
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/io.h>
+#include <asm/heartbeat.h>
#define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.0"
+#define DRV_VERSION "0.1.1"
-struct heartbeat_data {
- void __iomem *base;
- unsigned char bit_pos[8];
- struct timer_list timer;
-};
+static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
+ unsigned bit, unsigned int inverted)
+{
+ unsigned int new;
+
+ new = (1 << hd->bit_pos[bit]);
+ if (inverted)
+ new = ~new;
+
+ switch (hd->regsize) {
+ case 32:
+ iowrite32(new, hd->base);
+ break;
+ case 16:
+ iowrite16(new, hd->base);
+ break;
+ default:
+ iowrite8(new, hd->base);
+ break;
+ }
+}
static void heartbeat_timer(unsigned long data)
{
struct heartbeat_data *hd = (struct heartbeat_data *)data;
static unsigned bit = 0, up = 1;
- ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base);
+ heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED);
+
bit += up;
- if ((bit == 0) || (bit == ARRAY_SIZE(hd->bit_pos)-1))
+ if ((bit == 0) || (bit == (hd->nr_bits)-1))
up = -up;
mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
@@ -64,21 +84,31 @@
return -EINVAL;
}
- hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
- if (unlikely(!hd))
- return -ENOMEM;
-
if (pdev->dev.platform_data) {
- memcpy(hd->bit_pos, pdev->dev.platform_data,
- ARRAY_SIZE(hd->bit_pos));
+ hd = pdev->dev.platform_data;
} else {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++)
- hd->bit_pos[i] = i;
+ hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
+ if (unlikely(!hd))
+ return -ENOMEM;
}
- hd->base = (void __iomem *)(unsigned long)res->start;
+ hd->base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (!unlikely(hd->base)) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+
+ if (!pdev->dev.platform_data)
+ kfree(hd);
+
+ return -ENXIO;
+ }
+
+ if (!hd->nr_bits) {
+ hd->bit_pos = default_bit_pos;
+ hd->nr_bits = ARRAY_SIZE(default_bit_pos);
+ }
+
+ if (!hd->regsize)
+ hd->regsize = 8; /* default access size */
setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd);
platform_set_drvdata(pdev, hd);
@@ -91,10 +121,12 @@
struct heartbeat_data *hd = platform_get_drvdata(pdev);
del_timer_sync(&hd->timer);
+ iounmap(hd->base);
platform_set_drvdata(pdev, NULL);
- kfree(hd);
+ if (!pdev->dev.platform_data)
+ kfree(hd);
return 0;
}
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index 4a518d9..ec8430c 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -19,10 +19,10 @@
#include "pci-sh4.h"
static u8 rts7751r2d_irq_tab[] __initdata = {
- IRQ_PCISLOT1,
- IRQ_PCISLOT2,
- IRQ_PCMCIA,
- IRQ_PCIETH,
+ IRQ_PCI_INTA,
+ IRQ_PCI_INTB,
+ IRQ_PCI_INTC,
+ IRQ_PCI_INTD,
};
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 5508e45..e516087 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -79,19 +79,6 @@
ctrl_outl(0xAAAA0000, INTC_ICR1);
/* INTPRI: priority=3(all) */
ctrl_outl(0x33333333, INTC_INTPRI);
- } else {
- /* INTC SH-4 Mode */
- ctrl_outl(0x00200000, INTC_ICR0);
- /* enable PCIINTA - PCIINTD */
- ctrl_outl(0x00078000, INTC_INT2MSKCR);
- /* disable IRL4-7 Interrupt */
- ctrl_outl(0x40000000, INTC_INTMSK1);
- /* disable IRL4-7 Interrupt */
- ctrl_outl(0x0000fffe, INTC_INTMSK2);
- /* enable IRL0-3 Interrupt */
- ctrl_outl(0x80000000, INTC_INTMSKCLR1);
- /* enable IRL0-3 Interrupt */
- ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
}
if ((ret = sh4_pci_check_direct()) != 0)
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 92807ffa..b5f1e23 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -83,6 +83,8 @@
continue;
if (likely(clkp->ops && clkp->ops->recalc))
clkp->ops->recalc(clkp);
+ if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clkp);
}
}
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 9172e97..c217c4b 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -22,6 +22,7 @@
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/ubc.h>
+#include <asm/smp.h>
/*
* Generic wrapper for command line arguments to disable on-chip
@@ -143,12 +144,15 @@
flags &= ~CCR_CACHE_EMODE;
#endif
-#ifdef CONFIG_SH_WRITETHROUGH
- /* Turn on Write-through caching */
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+ /* Write-through */
flags |= CCR_CACHE_WT;
-#else
- /* .. or default to Write-back */
+#elif defined(CONFIG_CACHE_WRITEBACK)
+ /* Write-back */
flags |= CCR_CACHE_CB;
+#else
+ /* Off */
+ flags &= ~CCR_CACHE_ENABLE;
#endif
ctrl_outl(flags, CCR);
@@ -213,8 +217,11 @@
* Each processor family is still responsible for doing its own probing
* and cache configuration in detect_cpu_and_cache_system().
*/
-asmlinkage void __init sh_cpu_init(void)
+
+asmlinkage void __cpuinit sh_cpu_init(void)
{
+ current_thread_info()->cpu = hard_smp_processor_id();
+
/* First, probe the CPU */
detect_cpu_and_cache_system();
@@ -224,9 +231,10 @@
/* Init the cache */
cache_init();
- shm_align_mask = max_t(unsigned long,
- current_cpu_data.dcache.way_size - 1,
- PAGE_SIZE - 1);
+ if (raw_smp_processor_id() == 0)
+ shm_align_mask = max_t(unsigned long,
+ current_cpu_data.dcache.way_size - 1,
+ PAGE_SIZE - 1);
/* Disable the FPU */
if (fpu_disabled) {
@@ -265,6 +273,7 @@
* like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So ..
* we wake it up and hope that all is well.
*/
- ubc_wakeup();
+ if (raw_smp_processor_id() == 0)
+ ubc_wakeup();
speculative_execution_init();
}
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 60bfc05..8da8e17 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -1,9 +1,7 @@
#
# Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
#
-obj-y += imask.o
+obj-y += imask.o intc.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
-obj-$(CONFIG_CPU_HAS_INTC_IRQ) += intc.o
-obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index 9345a71..6ac018c 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -20,145 +20,258 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/bootmem.h>
-#define _INTC_MK(fn, idx, bit, value) \
- ((fn) << 24 | ((value) << 16) | ((idx) << 8) | (bit))
-#define _INTC_FN(h) (h >> 24)
-#define _INTC_VALUE(h) ((h >> 16) & 0xff)
-#define _INTC_IDX(h) ((h >> 8) & 0xff)
-#define _INTC_BIT(h) (h & 0xff)
+#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
+ ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
+ ((addr_e) << 16) | ((addr_d << 24)))
-#define _INTC_PTR(desc, member, data) \
- (desc->member + _INTC_IDX(data))
+#define _INTC_SHIFT(h) (h & 0x1f)
+#define _INTC_WIDTH(h) ((h >> 5) & 0xf)
+#define _INTC_FN(h) ((h >> 9) & 0xf)
+#define _INTC_MODE(h) ((h >> 13) & 0x7)
+#define _INTC_ADDR_E(h) ((h >> 16) & 0xff)
+#define _INTC_ADDR_D(h) ((h >> 24) & 0xff)
-static inline struct intc_desc *get_intc_desc(unsigned int irq)
+struct intc_handle_int {
+ unsigned int irq;
+ unsigned long handle;
+};
+
+struct intc_desc_int {
+ unsigned long *reg;
+#ifdef CONFIG_SMP
+ unsigned long *smp;
+#endif
+ unsigned int nr_reg;
+ struct intc_handle_int *prio;
+ unsigned int nr_prio;
+ struct intc_handle_int *sense;
+ unsigned int nr_sense;
+ struct irq_chip chip;
+};
+
+#ifdef CONFIG_SMP
+#define IS_SMP(x) x.smp
+#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c))
+#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1)
+#else
+#define IS_SMP(x) 0
+#define INTC_REG(d, x, c) (d->reg[(x)])
+#define SMP_NR(d, x) 1
+#endif
+
+static unsigned int intc_prio_level[NR_IRQS]; /* for now */
+
+static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
{
struct irq_chip *chip = get_irq_chip(irq);
- return (void *)((char *)chip - offsetof(struct intc_desc, chip));
+ return (void *)((char *)chip - offsetof(struct intc_desc_int, chip));
}
static inline unsigned int set_field(unsigned int value,
unsigned int field_value,
- unsigned int width,
- unsigned int shift)
+ unsigned int handle)
{
+ unsigned int width = _INTC_WIDTH(handle);
+ unsigned int shift = _INTC_SHIFT(handle);
+
value &= ~(((1 << width) - 1) << shift);
value |= field_value << shift;
return value;
}
-static inline unsigned int set_prio_field(struct intc_desc *desc,
- unsigned int value,
- unsigned int priority,
- unsigned int data)
+static void write_8(unsigned long addr, unsigned long h, unsigned long data)
{
- unsigned int width = _INTC_PTR(desc, prio_regs, data)->field_width;
-
- return set_field(value, priority, width, _INTC_BIT(data));
+ ctrl_outb(set_field(0, data, h), addr);
}
-static void disable_prio_16(struct intc_desc *desc, unsigned int data)
+static void write_16(unsigned long addr, unsigned long h, unsigned long data)
{
- unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg;
-
- ctrl_outw(set_prio_field(desc, ctrl_inw(addr), 0, data), addr);
+ ctrl_outw(set_field(0, data, h), addr);
}
-static void enable_prio_16(struct intc_desc *desc, unsigned int data)
+static void write_32(unsigned long addr, unsigned long h, unsigned long data)
{
- unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg;
- unsigned int prio = _INTC_VALUE(data);
-
- ctrl_outw(set_prio_field(desc, ctrl_inw(addr), prio, data), addr);
+ ctrl_outl(set_field(0, data, h), addr);
}
-static void disable_prio_32(struct intc_desc *desc, unsigned int data)
+static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
{
- unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg;
-
- ctrl_outl(set_prio_field(desc, ctrl_inl(addr), 0, data), addr);
+ ctrl_outb(set_field(ctrl_inb(addr), data, h), addr);
}
-static void enable_prio_32(struct intc_desc *desc, unsigned int data)
+static void modify_16(unsigned long addr, unsigned long h, unsigned long data)
{
- unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg;
- unsigned int prio = _INTC_VALUE(data);
-
- ctrl_outl(set_prio_field(desc, ctrl_inl(addr), prio, data), addr);
+ ctrl_outw(set_field(ctrl_inw(addr), data, h), addr);
}
-static void disable_mask_8(struct intc_desc *desc, unsigned int data)
+static void modify_32(unsigned long addr, unsigned long h, unsigned long data)
{
- ctrl_outb(1 << _INTC_BIT(data),
- _INTC_PTR(desc, mask_regs, data)->set_reg);
+ ctrl_outl(set_field(ctrl_inl(addr), data, h), addr);
}
-static void enable_mask_8(struct intc_desc *desc, unsigned int data)
-{
- ctrl_outb(1 << _INTC_BIT(data),
- _INTC_PTR(desc, mask_regs, data)->clr_reg);
-}
+enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 };
-static void disable_mask_32(struct intc_desc *desc, unsigned int data)
-{
- ctrl_outl(1 << _INTC_BIT(data),
- _INTC_PTR(desc, mask_regs, data)->set_reg);
-}
-
-static void enable_mask_32(struct intc_desc *desc, unsigned int data)
-{
- ctrl_outl(1 << _INTC_BIT(data),
- _INTC_PTR(desc, mask_regs, data)->clr_reg);
-}
-
-enum { REG_FN_ERROR=0,
- REG_FN_MASK_8, REG_FN_MASK_32,
- REG_FN_PRIO_16, REG_FN_PRIO_32 };
-
-static struct {
- void (*enable)(struct intc_desc *, unsigned int);
- void (*disable)(struct intc_desc *, unsigned int);
-} intc_reg_fns[] = {
- [REG_FN_MASK_8] = { enable_mask_8, disable_mask_8 },
- [REG_FN_MASK_32] = { enable_mask_32, disable_mask_32 },
- [REG_FN_PRIO_16] = { enable_prio_16, disable_prio_16 },
- [REG_FN_PRIO_32] = { enable_prio_32, disable_prio_32 },
+static void (*intc_reg_fns[])(unsigned long addr,
+ unsigned long h,
+ unsigned long data) = {
+ [REG_FN_WRITE_BASE + 0] = write_8,
+ [REG_FN_WRITE_BASE + 1] = write_16,
+ [REG_FN_WRITE_BASE + 3] = write_32,
+ [REG_FN_MODIFY_BASE + 0] = modify_8,
+ [REG_FN_MODIFY_BASE + 1] = modify_16,
+ [REG_FN_MODIFY_BASE + 3] = modify_32,
};
+enum { MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */
+ MODE_MASK_REG, /* Bit(s) set -> interrupt disabled */
+ MODE_DUAL_REG, /* Two registers, set bit to enable / disable */
+ MODE_PRIO_REG, /* Priority value written to enable interrupt */
+ MODE_PCLR_REG, /* Above plus all bits set to disable interrupt */
+};
+
+static void intc_mode_field(unsigned long addr,
+ unsigned long handle,
+ void (*fn)(unsigned long,
+ unsigned long,
+ unsigned long),
+ unsigned int irq)
+{
+ fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1));
+}
+
+static void intc_mode_zero(unsigned long addr,
+ unsigned long handle,
+ void (*fn)(unsigned long,
+ unsigned long,
+ unsigned long),
+ unsigned int irq)
+{
+ fn(addr, handle, 0);
+}
+
+static void intc_mode_prio(unsigned long addr,
+ unsigned long handle,
+ void (*fn)(unsigned long,
+ unsigned long,
+ unsigned long),
+ unsigned int irq)
+{
+ fn(addr, handle, intc_prio_level[irq]);
+}
+
+static void (*intc_enable_fns[])(unsigned long addr,
+ unsigned long handle,
+ void (*fn)(unsigned long,
+ unsigned long,
+ unsigned long),
+ unsigned int irq) = {
+ [MODE_ENABLE_REG] = intc_mode_field,
+ [MODE_MASK_REG] = intc_mode_zero,
+ [MODE_DUAL_REG] = intc_mode_field,
+ [MODE_PRIO_REG] = intc_mode_prio,
+ [MODE_PCLR_REG] = intc_mode_prio,
+};
+
+static void (*intc_disable_fns[])(unsigned long addr,
+ unsigned long handle,
+ void (*fn)(unsigned long,
+ unsigned long,
+ unsigned long),
+ unsigned int irq) = {
+ [MODE_ENABLE_REG] = intc_mode_zero,
+ [MODE_MASK_REG] = intc_mode_field,
+ [MODE_DUAL_REG] = intc_mode_field,
+ [MODE_PRIO_REG] = intc_mode_zero,
+ [MODE_PCLR_REG] = intc_mode_field,
+};
+
+static inline void _intc_enable(unsigned int irq, unsigned long handle)
+{
+ struct intc_desc_int *d = get_intc_desc(irq);
+ unsigned long addr;
+ unsigned int cpu;
+
+ for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) {
+ addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu);
+ intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\
+ [_INTC_FN(handle)], irq);
+ }
+}
+
static void intc_enable(unsigned int irq)
{
- struct intc_desc *desc = get_intc_desc(irq);
- unsigned int data = (unsigned int) get_irq_chip_data(irq);
-
- intc_reg_fns[_INTC_FN(data)].enable(desc, data);
+ _intc_enable(irq, (unsigned long)get_irq_chip_data(irq));
}
static void intc_disable(unsigned int irq)
{
- struct intc_desc *desc = get_intc_desc(irq);
- unsigned int data = (unsigned int) get_irq_chip_data(irq);
+ struct intc_desc_int *d = get_intc_desc(irq);
+ unsigned long handle = (unsigned long) get_irq_chip_data(irq);
+ unsigned long addr;
+ unsigned int cpu;
- intc_reg_fns[_INTC_FN(data)].disable(desc, data);
+ for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) {
+ addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu);
+ intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\
+ [_INTC_FN(handle)], irq);
+ }
}
-static void set_sense_16(struct intc_desc *desc, unsigned int data)
+static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
+ unsigned int nr_hp,
+ unsigned int irq)
{
- unsigned long addr = _INTC_PTR(desc, sense_regs, data)->reg;
- unsigned int width = _INTC_PTR(desc, sense_regs, data)->field_width;
- unsigned int bit = _INTC_BIT(data);
- unsigned int value = _INTC_VALUE(data);
+ int i;
- ctrl_outw(set_field(ctrl_inw(addr), value, width, bit), addr);
+ /* this doesn't scale well, but...
+ *
+ * this function should only be used for cerain uncommon
+ * operations such as intc_set_priority() and intc_set_sense()
+ * and in those rare cases performance doesn't matter that much.
+ * keeping the memory footprint low is more important.
+ *
+ * one rather simple way to speed this up and still keep the
+ * memory footprint down is to make sure the array is sorted
+ * and then perform a bisect to lookup the irq.
+ */
+
+ for (i = 0; i < nr_hp; i++) {
+ if ((hp + i)->irq != irq)
+ continue;
+
+ return hp + i;
+ }
+
+ return NULL;
}
-static void set_sense_32(struct intc_desc *desc, unsigned int data)
+int intc_set_priority(unsigned int irq, unsigned int prio)
{
- unsigned long addr = _INTC_PTR(desc, sense_regs, data)->reg;
- unsigned int width = _INTC_PTR(desc, sense_regs, data)->field_width;
- unsigned int bit = _INTC_BIT(data);
- unsigned int value = _INTC_VALUE(data);
+ struct intc_desc_int *d = get_intc_desc(irq);
+ struct intc_handle_int *ihp;
- ctrl_outl(set_field(ctrl_inl(addr), value, width, bit), addr);
+ if (!intc_prio_level[irq] || prio <= 1)
+ return -EINVAL;
+
+ ihp = intc_find_irq(d->prio, d->nr_prio, irq);
+ if (ihp) {
+ if (prio >= (1 << _INTC_WIDTH(ihp->handle)))
+ return -EINVAL;
+
+ intc_prio_level[irq] = prio;
+
+ /*
+ * only set secondary masking method directly
+ * primary masking method is using intc_prio_level[irq]
+ * priority level will be set during next enable()
+ */
+
+ if (_INTC_FN(ihp->handle) != REG_FN_ERR)
+ _intc_enable(irq, ihp->handle);
+ }
+ return 0;
}
#define VALID(x) (x | 0x80)
@@ -172,79 +285,38 @@
static int intc_set_sense(unsigned int irq, unsigned int type)
{
- struct intc_desc *desc = get_intc_desc(irq);
+ struct intc_desc_int *d = get_intc_desc(irq);
unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK];
- unsigned int i, j, data, bit;
- intc_enum enum_id = 0;
+ struct intc_handle_int *ihp;
+ unsigned long addr;
- for (i = 0; i < desc->nr_vectors; i++) {
- struct intc_vect *vect = desc->vectors + i;
-
- if (evt2irq(vect->vect) != irq)
- continue;
-
- enum_id = vect->enum_id;
- break;
- }
-
- if (!enum_id || !value)
+ if (!value)
return -EINVAL;
- value ^= VALID(0);
-
- for (i = 0; i < desc->nr_sense_regs; i++) {
- struct intc_sense_reg *sr = desc->sense_regs + i;
-
- for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
- if (sr->enum_ids[j] != enum_id)
- continue;
-
- bit = sr->reg_width - ((j + 1) * sr->field_width);
- data = _INTC_MK(0, i, bit, value);
-
- switch(sr->reg_width) {
- case 16:
- set_sense_16(desc, data);
- break;
- case 32:
- set_sense_32(desc, data);
- break;
- }
-
- return 0;
- }
+ ihp = intc_find_irq(d->sense, d->nr_sense, irq);
+ if (ihp) {
+ addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
+ intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
}
-
- return -EINVAL;
+ return 0;
}
-static unsigned int __init intc_find_mask_handler(unsigned int width)
+static unsigned int __init intc_get_reg(struct intc_desc_int *d,
+ unsigned long address)
{
- switch (width) {
- case 8:
- return REG_FN_MASK_8;
- case 32:
- return REG_FN_MASK_32;
+ unsigned int k;
+
+ for (k = 0; k < d->nr_reg; k++) {
+ if (d->reg[k] == address)
+ return k;
}
BUG();
- return REG_FN_ERROR;
+ return 0;
}
-static unsigned int __init intc_find_prio_handler(unsigned int width)
-{
- switch (width) {
- case 16:
- return REG_FN_PRIO_16;
- case 32:
- return REG_FN_PRIO_32;
- }
-
- BUG();
- return REG_FN_ERROR;
-}
-
-static intc_enum __init intc_grp_id(struct intc_desc *desc, intc_enum enum_id)
+static intc_enum __init intc_grp_id(struct intc_desc *desc,
+ intc_enum enum_id)
{
struct intc_group *g = desc->groups;
unsigned int i, j;
@@ -289,10 +361,12 @@
}
static unsigned int __init intc_mask_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
intc_enum enum_id, int do_grps)
{
struct intc_mask_reg *mr = desc->mask_regs;
- unsigned int i, j, fn;
+ unsigned int i, j, fn, mode;
+ unsigned long reg_e, reg_d;
for (i = 0; mr && enum_id && i < desc->nr_mask_regs; i++) {
mr = desc->mask_regs + i;
@@ -301,25 +375,46 @@
if (mr->enum_ids[j] != enum_id)
continue;
- fn = intc_find_mask_handler(mr->reg_width);
- if (fn == REG_FN_ERROR)
- return 0;
+ if (mr->set_reg && mr->clr_reg) {
+ fn = REG_FN_WRITE_BASE;
+ mode = MODE_DUAL_REG;
+ reg_e = mr->clr_reg;
+ reg_d = mr->set_reg;
+ } else {
+ fn = REG_FN_MODIFY_BASE;
+ if (mr->set_reg) {
+ mode = MODE_ENABLE_REG;
+ reg_e = mr->set_reg;
+ reg_d = mr->set_reg;
+ } else {
+ mode = MODE_MASK_REG;
+ reg_e = mr->clr_reg;
+ reg_d = mr->clr_reg;
+ }
+ }
- return _INTC_MK(fn, i, (mr->reg_width - 1) - j, 0);
+ fn += (mr->reg_width >> 3) - 1;
+ return _INTC_MK(fn, mode,
+ intc_get_reg(d, reg_e),
+ intc_get_reg(d, reg_d),
+ 1,
+ (mr->reg_width - 1) - j);
}
}
if (do_grps)
- return intc_mask_data(desc, intc_grp_id(desc, enum_id), 0);
+ return intc_mask_data(desc, d, intc_grp_id(desc, enum_id), 0);
return 0;
}
static unsigned int __init intc_prio_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
intc_enum enum_id, int do_grps)
{
struct intc_prio_reg *pr = desc->prio_regs;
- unsigned int i, j, fn, bit, prio;
+ unsigned int i, j, fn, mode, bit;
+ unsigned long reg_e, reg_d;
for (i = 0; pr && enum_id && i < desc->nr_prio_regs; i++) {
pr = desc->prio_regs + i;
@@ -328,28 +423,72 @@
if (pr->enum_ids[j] != enum_id)
continue;
- fn = intc_find_prio_handler(pr->reg_width);
- if (fn == REG_FN_ERROR)
- return 0;
+ if (pr->set_reg && pr->clr_reg) {
+ fn = REG_FN_WRITE_BASE;
+ mode = MODE_PCLR_REG;
+ reg_e = pr->set_reg;
+ reg_d = pr->clr_reg;
+ } else {
+ fn = REG_FN_MODIFY_BASE;
+ mode = MODE_PRIO_REG;
+ if (!pr->set_reg)
+ BUG();
+ reg_e = pr->set_reg;
+ reg_d = pr->set_reg;
+ }
- prio = intc_prio_value(desc, enum_id, 1);
+ fn += (pr->reg_width >> 3) - 1;
bit = pr->reg_width - ((j + 1) * pr->field_width);
BUG_ON(bit < 0);
- return _INTC_MK(fn, i, bit, prio);
+ return _INTC_MK(fn, mode,
+ intc_get_reg(d, reg_e),
+ intc_get_reg(d, reg_d),
+ pr->field_width, bit);
}
}
if (do_grps)
- return intc_prio_data(desc, intc_grp_id(desc, enum_id), 0);
+ return intc_prio_data(desc, d, intc_grp_id(desc, enum_id), 0);
return 0;
}
-static void __init intc_register_irq(struct intc_desc *desc, intc_enum enum_id,
+static unsigned int __init intc_sense_data(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id)
+{
+ struct intc_sense_reg *sr = desc->sense_regs;
+ unsigned int i, j, fn, bit;
+
+ for (i = 0; sr && enum_id && i < desc->nr_sense_regs; i++) {
+ sr = desc->sense_regs + i;
+
+ for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) {
+ if (sr->enum_ids[j] != enum_id)
+ continue;
+
+ fn = REG_FN_MODIFY_BASE;
+ fn += (sr->reg_width >> 3) - 1;
+ bit = sr->reg_width - ((j + 1) * sr->field_width);
+
+ BUG_ON(bit < 0);
+
+ return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg),
+ 0, sr->field_width, bit);
+ }
+ }
+
+ return 0;
+}
+
+static void __init intc_register_irq(struct intc_desc *desc,
+ struct intc_desc_int *d,
+ intc_enum enum_id,
unsigned int irq)
{
+ struct intc_handle_int *hp;
unsigned int data[2], primary;
/* Prefer single interrupt source bitmap over other combinations:
@@ -359,15 +498,15 @@
* 4. priority, multiple interrupt sources (groups)
*/
- data[0] = intc_mask_data(desc, enum_id, 0);
- data[1] = intc_prio_data(desc, enum_id, 0);
+ data[0] = intc_mask_data(desc, d, enum_id, 0);
+ data[1] = intc_prio_data(desc, d, enum_id, 0);
primary = 0;
if (!data[0] && data[1])
primary = 1;
- data[0] = data[0] ? data[0] : intc_mask_data(desc, enum_id, 1);
- data[1] = data[1] ? data[1] : intc_prio_data(desc, enum_id, 1);
+ data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
+ data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
if (!data[primary])
primary ^= 1;
@@ -375,31 +514,118 @@
BUG_ON(!data[primary]); /* must have primary masking method */
disable_irq_nosync(irq);
- set_irq_chip_and_handler_name(irq, &desc->chip,
+ set_irq_chip_and_handler_name(irq, &d->chip,
handle_level_irq, "level");
set_irq_chip_data(irq, (void *)data[primary]);
+ /* record the desired priority level */
+ intc_prio_level[irq] = intc_prio_value(desc, enum_id, 1);
+
/* enable secondary masking method if present */
if (data[!primary])
- intc_reg_fns[_INTC_FN(data[!primary])].enable(desc,
- data[!primary]);
+ _intc_enable(irq, data[!primary]);
+
+ /* add irq to d->prio list if priority is available */
+ if (data[1]) {
+ hp = d->prio + d->nr_prio;
+ hp->irq = irq;
+ hp->handle = data[1];
+
+ if (primary) {
+ /*
+ * only secondary priority should access registers, so
+ * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority()
+ */
+
+ hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0);
+ hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0);
+ }
+ d->nr_prio++;
+ }
+
+ /* add irq to d->sense list if sense is available */
+ data[0] = intc_sense_data(desc, d, enum_id);
+ if (data[0]) {
+ (d->sense + d->nr_sense)->irq = irq;
+ (d->sense + d->nr_sense)->handle = data[0];
+ d->nr_sense++;
+ }
/* irq should be disabled by default */
- desc->chip.mask(irq);
+ d->chip.mask(irq);
}
+static unsigned int __init save_reg(struct intc_desc_int *d,
+ unsigned int cnt,
+ unsigned long value,
+ unsigned int smp)
+{
+ if (value) {
+ d->reg[cnt] = value;
+#ifdef CONFIG_SMP
+ d->smp[cnt] = smp;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+
void __init register_intc_controller(struct intc_desc *desc)
{
- unsigned int i;
+ unsigned int i, k, smp;
+ struct intc_desc_int *d;
- desc->chip.mask = intc_disable;
- desc->chip.unmask = intc_enable;
- desc->chip.mask_ack = intc_disable;
- desc->chip.set_type = intc_set_sense;
+ d = alloc_bootmem(sizeof(*d));
+
+ d->nr_reg = desc->mask_regs ? desc->nr_mask_regs * 2 : 0;
+ d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
+ d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
+
+ d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
+#ifdef CONFIG_SMP
+ d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
+#endif
+ k = 0;
+
+ if (desc->mask_regs) {
+ for (i = 0; i < desc->nr_mask_regs; i++) {
+ smp = IS_SMP(desc->mask_regs[i]);
+ k += save_reg(d, k, desc->mask_regs[i].set_reg, smp);
+ k += save_reg(d, k, desc->mask_regs[i].clr_reg, smp);
+ }
+ }
+
+ if (desc->prio_regs) {
+ d->prio = alloc_bootmem(desc->nr_vectors * sizeof(*d->prio));
+
+ for (i = 0; i < desc->nr_prio_regs; i++) {
+ smp = IS_SMP(desc->prio_regs[i]);
+ k += save_reg(d, k, desc->prio_regs[i].set_reg, smp);
+ k += save_reg(d, k, desc->prio_regs[i].clr_reg, smp);
+ }
+ }
+
+ if (desc->sense_regs) {
+ d->sense = alloc_bootmem(desc->nr_vectors * sizeof(*d->sense));
+
+ for (i = 0; i < desc->nr_sense_regs; i++) {
+ k += save_reg(d, k, desc->sense_regs[i].reg, 0);
+ }
+ }
+
+ BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
+
+ d->chip.name = desc->name;
+ d->chip.mask = intc_disable;
+ d->chip.unmask = intc_enable;
+ d->chip.mask_ack = intc_disable;
+ d->chip.set_type = intc_set_sense;
for (i = 0; i < desc->nr_vectors; i++) {
struct intc_vect *vect = desc->vectors + i;
- intc_register_irq(desc, vect->enum_id, evt2irq(vect->vect));
+ intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect));
}
}
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
deleted file mode 100644
index cc52213..0000000
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Interrupt handling for INTC2-based IRQ.
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * These are the "new Hitachi style" interrupts, as present on the
- * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/smp.h>
-
-static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
-{
- struct irq_chip *chip = get_irq_chip(irq);
- return (void *)((char *)chip - offsetof(struct intc2_desc, chip));
-}
-
-static void disable_intc2_irq(unsigned int irq)
-{
- struct intc2_data *p = get_irq_chip_data(irq);
- struct intc2_desc *d = get_intc2_desc(irq);
-
- ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset +
- (hard_smp_processor_id() * 4));
-}
-
-static void enable_intc2_irq(unsigned int irq)
-{
- struct intc2_data *p = get_irq_chip_data(irq);
- struct intc2_desc *d = get_intc2_desc(irq);
-
- ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset +
- (hard_smp_processor_id() * 4));
-}
-
-/*
- * Setup an INTC2 style interrupt.
- * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
- * allowing the use of the numbers straight out of the datasheet.
- * For example:
- * PIO1 which is INTPRI00[19,16] and INTMSK00[13]
- * would be: ^ ^ ^ ^
- * | | | |
- * { 84, 0, 16, 0, 13 },
- *
- * in the intc2_data table.
- */
-void register_intc2_controller(struct intc2_desc *desc)
-{
- int i;
-
- desc->chip.mask = disable_intc2_irq;
- desc->chip.unmask = enable_intc2_irq;
- desc->chip.mask_ack = disable_intc2_irq;
-
- for (i = 0; i < desc->nr_irqs; i++) {
- unsigned long ipr, flags;
- struct intc2_data *p = desc->intc2_data + i;
-
- disable_irq_nosync(p->irq);
-
- if (desc->prio_base) {
- /* Set the priority level */
- local_irq_save(flags);
-
- ipr = ctrl_inl(desc->prio_base + p->ipr_offset);
- ipr &= ~(0xf << p->ipr_shift);
- ipr |= p->priority << p->ipr_shift;
- ctrl_outl(ipr, desc->prio_base + p->ipr_offset);
-
- local_irq_restore(flags);
- }
-
- set_irq_chip_and_handler_name(p->irq, &desc->chip,
- handle_level_irq, "level");
- set_irq_chip_data(p->irq, p);
-
- disable_intc2_irq(p->irq);
- }
-}
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index abbf174..5916d90 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -10,26 +10,25 @@
* for more details.
*/
#include <linux/init.h>
-#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/cache.h>
int __init detect_cpu_and_cache_system(void)
{
#if defined(CONFIG_CPU_SUBTYPE_SH7619)
- current_cpu_data.type = CPU_SH7619;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.dcache.way_incr = (1<<12);
- current_cpu_data.dcache.sets = 256;
- current_cpu_data.dcache.entry_shift = 4;
- current_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- current_cpu_data.dcache.flags = 0;
+ boot_cpu_data.type = CPU_SH7619;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.dcache.way_incr = (1<<12);
+ boot_cpu_data.dcache.sets = 256;
+ boot_cpu_data.dcache.entry_shift = 4;
+ boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
+ boot_cpu_data.dcache.flags = 0;
#endif
/*
* SH-2 doesn't have separate caches
*/
- current_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
- current_cpu_data.icache = current_cpu_data.dcache;
+ boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+ boot_cpu_data.icache = boot_cpu_data.dcache;
return 0;
}
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index a979b98..ec6adc3 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -12,6 +12,61 @@
#include <linux/serial.h>
#include <asm/sci.h>
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ WDT, EDMAC, CMT0, CMT1,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ HIF_HIFI, HIF_HIFBI,
+ DMAC0, DMAC1, DMAC2, DMAC3,
+ SIOF,
+
+ /* interrupt groups */
+ SCIF0, SCIF1, SCIF2,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+ INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+ INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
+ INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
+ INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
+ INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
+ INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89),
+ INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91),
+ INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93),
+ INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95),
+ INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97),
+ INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99),
+ INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
+ INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
+ INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
+ INTC_IRQ(SIOF, 108),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+ { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
+ { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
+ { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
+ { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+ { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups,
+ NULL, NULL, prio_registers, NULL);
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xf8400000,
@@ -52,43 +107,7 @@
}
__initcall(sh7619_devices_setup);
-static struct ipr_data ipr_irq_table[] = {
- { 86, 0, 4, 2 }, /* CMI0 */
- { 88, 1, 12, 3 }, /* SCIF0_ERI */
- { 89, 1, 12, 3 }, /* SCIF0_RXI */
- { 90, 1, 12, 3 }, /* SCIF0_BRI */
- { 91, 1, 12, 3 }, /* SCIF0_TXI */
- { 92, 1, 8, 3 }, /* SCIF1_ERI */
- { 93, 1, 8, 3 }, /* SCIF1_RXI */
- { 94, 1, 8, 3 }, /* SCIF1_BRI */
- { 95, 1, 8, 3 }, /* SCIF1_TXI */
- { 96, 1, 4, 3 }, /* SCIF2_ERI */
- { 97, 1, 4, 3 }, /* SCIF2_RXI */
- { 98, 1, 4, 3 }, /* SCIF2_BRI */
- { 99, 1, 4, 3 }, /* SCIF2_TXI */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xf8080000, /* IPRC */
- 0xf8080002, /* IPRD */
- 0xf8080004, /* IPRE */
- 0xf8080006, /* IPRF */
- 0xf8080008, /* IPRG */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7619",
- },
-};
-
void __init plat_irq_setup(void)
{
- register_ipr_controller(&ipr_irq_desc);
+ register_intc_controller(&intc_desc);
}
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
index f455c35..6d02465 100644
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -17,15 +17,15 @@
int __init detect_cpu_and_cache_system(void)
{
/* Just SH7206 for now .. */
- current_cpu_data.type = CPU_SH7206;
- current_cpu_data.flags |= CPU_HAS_OP32;
+ boot_cpu_data.type = CPU_SH7206;
+ boot_cpu_data.flags |= CPU_HAS_OP32;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.dcache.way_incr = (1 << 11);
- current_cpu_data.dcache.sets = 128;
- current_cpu_data.dcache.entry_shift = 4;
- current_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- current_cpu_data.dcache.flags = 0;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.dcache.way_incr = (1 << 11);
+ boot_cpu_data.dcache.sets = 128;
+ boot_cpu_data.dcache.entry_shift = 4;
+ boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
+ boot_cpu_data.dcache.flags = 0;
/*
* The icache is the same as the dcache as far as this setup is
@@ -33,7 +33,7 @@
* lacks the U bit that the dcache has, none of this has any bearing
* on the cache info.
*/
- current_cpu_data.icache = current_cpu_data.dcache;
+ boot_cpu_data.icache = boot_cpu_data.dcache;
return 0;
}
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index deab165..bd745aa 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -12,27 +12,184 @@
#include <linux/serial.h>
#include <asm/sci.h>
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+ ADC_ADI0, ADC_ADI1,
+ DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI,
+ DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI,
+ DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI,
+ DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI,
+ CMT0, CMT1, BSC, WDT,
+ MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
+ MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
+ MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
+ MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
+ MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
+ MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
+ MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
+ POE2_OEI1, POE2_OEI2,
+ MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V,
+ MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V,
+ MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W,
+ POE2_OEI3,
+ IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI,
+ SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+ SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+ SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
+ SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
+
+ /* interrupt groups */
+ PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+ MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+ MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
+ IIC3, SCIF0, SCIF1, SCIF2, SCIF3,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+ INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+ INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+ INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+ INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+ INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+ INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+ INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+ INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
+ INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109),
+ INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113),
+ INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117),
+ INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121),
+ INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125),
+ INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129),
+ INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133),
+ INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137),
+ INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
+ INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
+ INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157),
+ INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159),
+ INTC_IRQ(MTU2_TCI0V, 160),
+ INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162),
+ INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165),
+ INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169),
+ INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173),
+ INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177),
+ INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181),
+ INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183),
+ INTC_IRQ(MTU2_TCI3V, 184),
+ INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189),
+ INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191),
+ INTC_IRQ(MTU2_TCI4V, 192),
+ INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197),
+ INTC_IRQ(MTU2_TGI5W, 198),
+ INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201),
+ INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205),
+ INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207),
+ INTC_IRQ(MTU2S_TCI3V, 208),
+ INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213),
+ INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215),
+ INTC_IRQ(MTU2S_TCI4V, 216),
+ INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221),
+ INTC_IRQ(MTU2S_TGI5W, 222),
+ INTC_IRQ(POE2_OEI3, 224),
+ INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229),
+ INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231),
+ INTC_IRQ(IIC3_TEI, 232),
+ INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241),
+ INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243),
+ INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245),
+ INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247),
+ INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249),
+ INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251),
+ INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253),
+ INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+ PINT4, PINT5, PINT6, PINT7),
+ INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI),
+ INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI),
+ INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI),
+ INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI),
+ INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI),
+ INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI),
+ INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI),
+ INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI),
+ INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
+ INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
+ INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B),
+ INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U),
+ INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B),
+ INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U),
+ INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
+ INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
+ INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
+ INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2),
+ INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B,
+ MTU2S_TGI3C, MTU2S_TGI3D),
+ INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B,
+ MTU2S_TGI4C, MTU2S_TGI4D),
+ INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W),
+ INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI),
+ INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
+ INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
+ INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+ { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } },
+ { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+ { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
+ { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } },
+ { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF,
+ MTU1_AB, MTU1_VU } },
+ { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU,
+ MTU3_ABCD, MTU2_TCI3V } },
+ { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V,
+ MTU5, POE2_12 } },
+ { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V,
+ MTU4S_ABCD, MTU2S_TCI4V } },
+ { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } },
+ { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xfffe0808, 0, 16, /* PINTER */
+ { 0, 0, 0, 0, 0, 0, 0, 0,
+ PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups,
+ NULL, mask_registers, prio_registers, NULL);
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 241, 242, 243, 240},
+ .irqs = { 241, 242, 243, 240 },
}, {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 247, 244, 245, 246},
+ .irqs = { 245, 246, 247, 244 },
}, {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 249, 250, 251, 248},
+ .irqs = { 249, 250, 251, 248 },
}, {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 253, 254, 255, 252},
+ .irqs = { 253, 254, 255, 252 },
}, {
.flags = 0,
}
@@ -57,57 +214,7 @@
}
__initcall(sh7206_devices_setup);
-static struct ipr_data ipr_irq_table[] = {
- { 140, 7, 12, 2 }, /* CMI0 */
- { 164, 8, 4, 2 }, /* MTU2_TGI1A */
- { 240, 13, 12, 3 }, /* SCIF0_BRI */
- { 241, 13, 12, 3 }, /* SCIF0_ERI */
- { 242, 13, 12, 3 }, /* SCIF0_RXI */
- { 243, 13, 12, 3 }, /* SCIF0_TXI */
- { 244, 13, 8, 3 }, /* SCIF1_BRI */
- { 245, 13, 8, 3 }, /* SCIF1_ERI */
- { 246, 13, 8, 3 }, /* SCIF1_RXI */
- { 247, 13, 8, 3 }, /* SCIF1_TXI */
- { 248, 13, 4, 3 }, /* SCIF2_BRI */
- { 249, 13, 4, 3 }, /* SCIF2_ERI */
- { 250, 13, 4, 3 }, /* SCIF2_RXI */
- { 251, 13, 4, 3 }, /* SCIF2_TXI */
- { 252, 13, 0, 3 }, /* SCIF3_BRI */
- { 253, 13, 0, 3 }, /* SCIF3_ERI */
- { 254, 13, 0, 3 }, /* SCIF3_RXI */
- { 255, 13, 0, 3 }, /* SCIF3_TXI */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xfffe0818, /* IPR01 */
- 0xfffe081a, /* IPR02 */
- 0, /* unused */
- 0, /* unused */
- 0xfffe0820, /* IPR05 */
- 0xfffe0c00, /* IPR06 */
- 0xfffe0c02, /* IPR07 */
- 0xfffe0c04, /* IPR08 */
- 0xfffe0c06, /* IPR09 */
- 0xfffe0c08, /* IPR10 */
- 0xfffe0c0a, /* IPR11 */
- 0xfffe0c0c, /* IPR12 */
- 0xfffe0c0e, /* IPR13 */
- 0xfffe0c10, /* IPR14 */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7206",
- },
-};
-
void __init plat_irq_setup(void)
{
- register_ipr_controller(&ipr_irq_desc);
+ register_intc_controller(&intc_desc);
}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 55b7507..646eb69 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -6,12 +6,13 @@
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o
obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH3) := clock-sh3.o
@@ -19,5 +20,6 @@
clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o
obj-y += $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 647623b..bf579e0 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -50,44 +50,47 @@
back_to_P1();
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.dcache.entry_shift = 4;
- current_cpu_data.dcache.linesz = L1_CACHE_BYTES;
- current_cpu_data.dcache.flags = 0;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.dcache.entry_shift = 4;
+ boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
+ boot_cpu_data.dcache.flags = 0;
/*
* 7709A/7729 has 16K cache (256-entry), while 7702 has only
* 2K(direct) 7702 is not supported (yet)
*/
if (data0 == data1 && data2 == data3) { /* Shadow */
- current_cpu_data.dcache.way_incr = (1 << 11);
- current_cpu_data.dcache.entry_mask = 0x7f0;
- current_cpu_data.dcache.sets = 128;
- current_cpu_data.type = CPU_SH7708;
+ boot_cpu_data.dcache.way_incr = (1 << 11);
+ boot_cpu_data.dcache.entry_mask = 0x7f0;
+ boot_cpu_data.dcache.sets = 128;
+ boot_cpu_data.type = CPU_SH7708;
- current_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
+ boot_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
} else { /* 7709A or 7729 */
- current_cpu_data.dcache.way_incr = (1 << 12);
- current_cpu_data.dcache.entry_mask = 0xff0;
- current_cpu_data.dcache.sets = 256;
- current_cpu_data.type = CPU_SH7729;
+ boot_cpu_data.dcache.way_incr = (1 << 12);
+ boot_cpu_data.dcache.entry_mask = 0xff0;
+ boot_cpu_data.dcache.sets = 256;
+ boot_cpu_data.type = CPU_SH7729;
#if defined(CONFIG_CPU_SUBTYPE_SH7706)
- current_cpu_data.type = CPU_SH7706;
+ boot_cpu_data.type = CPU_SH7706;
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7710)
- current_cpu_data.type = CPU_SH7710;
+ boot_cpu_data.type = CPU_SH7710;
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7712)
- current_cpu_data.type = CPU_SH7712;
+ boot_cpu_data.type = CPU_SH7712;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+ boot_cpu_data.type = CPU_SH7720;
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- current_cpu_data.type = CPU_SH7705;
+ boot_cpu_data.type = CPU_SH7705;
#if defined(CONFIG_SH7705_CACHE_32KB)
- current_cpu_data.dcache.way_incr = (1 << 13);
- current_cpu_data.dcache.entry_mask = 0x1ff0;
- current_cpu_data.dcache.sets = 512;
+ boot_cpu_data.dcache.way_incr = (1 << 13);
+ boot_cpu_data.dcache.entry_mask = 0x1ff0;
+ boot_cpu_data.dcache.sets = 512;
ctrl_outl(CCR_CACHE_32KB, CCR3);
#else
ctrl_outl(CCR_CACHE_16KB, CCR3);
@@ -98,9 +101,8 @@
/*
* SH-3 doesn't have separate caches
*/
- current_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
- current_cpu_data.icache = current_cpu_data.dcache;
+ boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+ boot_cpu_data.icache = boot_cpu_data.dcache;
return 0;
}
-
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index ebd9d06..f6c65f2 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -1,7 +1,7 @@
/*
* SH7705 Setup
*
- * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006, 2007 Paul Mundt
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -10,8 +10,90 @@
*/
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/serial.h>
#include <asm/sci.h>
+#include <asm/rtc.h>
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+ PINT07, PINT815,
+ DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
+ ADC_ADI,
+ USB_USI0, USB_USI1,
+ TPU0, TPU1, TPU2, TPU3,
+ TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
+ RTC_ATI, RTC_PRI, RTC_CUI,
+ WDT,
+ REF_RCMI,
+
+ /* interrupt groups */
+ RTC, TMU2, DMAC, USB, SCIF2, SCIF0,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
+ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
+ INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
+ INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
+ INTC_VECT(SCIF0_TXI, 0x8e0),
+ INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
+ INTC_VECT(SCIF2_TXI, 0x960),
+ INTC_VECT(ADC_ADI, 0x980),
+ INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40),
+ INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
+ INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0),
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+ INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
+ INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(WDT, 0x560),
+ INTC_VECT(REF_RCMI, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
+ INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
+ INTC_GROUP(USB, USB_USI0, USB_USI1),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(DMAC, 7),
+ INTC_PRIO(SCIF2, 3),
+ INTC_PRIO(SCIF0, 3),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
+ { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+ { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } },
+ { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } },
+ { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } },
+ { 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } },
+ { 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } },
+
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups,
+ priorities, NULL, prio_registers, NULL);
+
+static struct intc_vect vectors_irq[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL,
+ priorities, NULL, prio_registers, NULL);
static struct plat_sci_port sci_platform_data[] = {
{
@@ -37,8 +119,43 @@
},
};
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xfffffec0,
+ .end = 0xfffffec0 + 0x1e,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+ .capabilities = RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+ .dev = {
+ .platform_data = &rtc_info,
+ },
+};
+
static struct platform_device *sh7705_devices[] __initdata = {
&sci_device,
+ &rtc_device,
};
static int __init sh7705_devices_setup(void)
@@ -48,51 +165,16 @@
}
__initcall(sh7705_devices_setup);
-static struct ipr_data ipr_irq_table[] = {
- /* IRQ, IPR-idx, shift, priority */
- { 16, 0, 12, 2 }, /* TMU0 TUNI*/
- { 17, 0, 8, 2 }, /* TMU1 TUNI */
- { 18, 0, 4, 2 }, /* TMU2 TUNI */
- { 27, 1, 12, 2 }, /* WDT ITI */
- { 20, 0, 0, 2 }, /* RTC ATI (alarm) */
- { 21, 0, 0, 2 }, /* RTC PRI (period) */
- { 22, 0, 0, 2 }, /* RTC CUI (carry) */
- { 48, 4, 12, 7 }, /* DMAC DMTE0 */
- { 49, 4, 12, 7 }, /* DMAC DMTE1 */
- { 50, 4, 12, 7 }, /* DMAC DMTE2 */
- { 51, 4, 12, 7 }, /* DMAC DMTE3 */
- { 52, 4, 8, 3 }, /* SCIF0 ERI */
- { 53, 4, 8, 3 }, /* SCIF0 RXI */
- { 55, 4, 8, 3 }, /* SCIF0 TXI */
- { 56, 4, 4, 3 }, /* SCIF1 ERI */
- { 57, 4, 4, 3 }, /* SCIF1 RXI */
- { 59, 4, 4, 3 }, /* SCIF1 TXI */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xFFFFFEE2, /* 0: IPRA */
- 0xFFFFFEE4, /* 1: IPRB */
- 0xA4000016, /* 2: IPRC */
- 0xA4000018, /* 3: IPRD */
- 0xA400001A, /* 4: IPRE */
- 0xA4080000, /* 5: IPRF */
- 0xA4080002, /* 6: IPRG */
- 0xA4080004, /* 7: IPRH */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7705",
- },
-};
+void __init plat_irq_setup_pins(int mode)
+{
+ if (mode == IRQ_MODE_IRQ) {
+ register_intc_controller(&intc_desc_irq);
+ return;
+ }
+ BUG();
+}
void __init plat_irq_setup(void)
{
- register_ipr_controller(&ipr_irq_desc);
+ register_intc_controller(&intc_desc);
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7708.c b/arch/sh/kernel/cpu/sh3/setup-sh7708.c
deleted file mode 100644
index f933723..0000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7708.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * SH7708 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xfffffe80,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCI,
- .irqs = { 23, 24, 25, 0 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device *sh7708_devices[] __initdata = {
- &sci_device,
-};
-
-static int __init sh7708_devices_setup(void)
-{
- return platform_add_devices(sh7708_devices,
- ARRAY_SIZE(sh7708_devices));
-}
-__initcall(sh7708_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
deleted file mode 100644
index 086f8e2..0000000
--- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * SH7707/SH7709 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 20,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xfffffe80,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCI,
- .irqs = { 23, 24, 25, 0 },
- }, {
- .mapbase = 0xa4000150,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 56, 57, 59, 58 },
- }, {
- .mapbase = 0xa4000140,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_IRDA,
- .irqs = { 52, 53, 55, 54 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct platform_device *sh7709_devices[] __initdata = {
- &sci_device,
- &rtc_device,
-};
-
-static int __init sh7709_devices_setup(void)
-{
- return platform_add_devices(sh7709_devices,
- ARRAY_SIZE(sh7709_devices));
-}
-__initcall(sh7709_devices_setup);
-
-static struct ipr_data ipr_irq_table[] = {
- { 16, 0, 12, 2 }, /* TMU TUNI0 */
- { 17, 0, 8, 4 }, /* TMU TUNI1 */
- { 18, 0, 4, 1 }, /* TMU TUNI1 */
- { 19, 0, 4, 1 }, /* TMU TUNI1 */
- { 20, 0, 0, 2 }, /* RTC CUI */
- { 21, 0, 0, 2 }, /* RTC CUI */
- { 22, 0, 0, 2 }, /* RTC CUI */
-
- { 23, 1, 4, 3 }, /* SCI */
- { 24, 1, 4, 3 }, /* SCI */
- { 25, 1, 4, 3 }, /* SCI */
- { 26, 1, 4, 3 }, /* SCI */
- { 27, 1, 12, 3 }, /* WDT ITI */
-
- { 32, 2, 0, 1 }, /* IRQ 0 */
- { 33, 2, 4, 1 }, /* IRQ 1 */
- { 34, 2, 8, 1 }, /* IRQ 2 APM */
- { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */
-
- { 36, 3, 0, 1 }, /* IRQ 4 */
- { 37, 3, 4, 1 }, /* IRQ 5 */
-
- { 48, 4, 12, 7 }, /* DMA */
- { 49, 4, 12, 7 }, /* DMA */
- { 50, 4, 12, 7 }, /* DMA */
- { 51, 4, 12, 7 }, /* DMA */
-
- { 52, 4, 8, 3 }, /* IRDA */
- { 53, 4, 8, 3 }, /* IRDA */
- { 54, 4, 8, 3 }, /* IRDA */
- { 55, 4, 8, 3 }, /* IRDA */
-
- { 56, 4, 4, 3 }, /* SCIF */
- { 57, 4, 4, 3 }, /* SCIF */
- { 58, 4, 4, 3 }, /* SCIF */
- { 59, 4, 4, 3 }, /* SCIF */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xfffffee2, /* 0: IPRA */
- 0xfffffee4, /* 1: IPRB */
- 0xa4000016, /* 2: IPRC */
- 0xa4000018, /* 3: IPRD */
- 0xa400001a, /* 4: IPRE */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7709",
- },
-};
-
-void __init plat_irq_setup(void)
-{
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
new file mode 100644
index 0000000..60b04b1
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -0,0 +1,224 @@
+/*
+ * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
+ *
+ * Copyright (C) 2007 Magnus Damm
+ *
+ * Based on setup-sh7709.c
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+ PINT07, PINT815,
+ DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI,
+ ADC_ADI,
+ LCDC, PCC0, PCC1,
+ TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
+ RTC_ATI, RTC_PRI, RTC_CUI,
+ WDT,
+ REF_RCMI, REF_ROVI,
+
+ /* interrupt groups */
+ RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+ INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
+ INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500),
+ INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540),
+ INTC_VECT(WDT, 0x560),
+ INTC_VECT(REF_RCMI, 0x580),
+ INTC_VECT(REF_ROVI, 0x5a0),
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
+ INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
+ INTC_VECT(ADC_ADI, 0x980),
+ INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
+ INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
+ INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
+ INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+ INTC_VECT(LCDC, 0x9a0),
+ INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0),
+#endif
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
+ INTC_GROUP(REF, REF_RCMI, REF_ROVI),
+ INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
+ INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(DMAC, 7),
+ INTC_PRIO(SCI, 3),
+ INTC_PRIO(SCIF2, 3),
+ INTC_PRIO(SCIF0, 3),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+ { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+ { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } },
+ { 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+ { 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } },
+#endif
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
+ priorities, NULL, prio_registers, NULL);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+static struct intc_vect vectors_irq[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL,
+ priorities, NULL, prio_registers, NULL);
+#endif
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xfffffec0,
+ .end = 0xfffffec0 + 0x1e,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xfffffe80,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 23, 24, 25, 0 },
+ },
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ {
+ .mapbase = 0xa4000150,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 56, 57, 59, 58 },
+ },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ {
+ .mapbase = 0xa4000140,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_IRDA,
+ .irqs = { 52, 53, 55, 54 },
+ },
+#endif
+ {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh770x_devices[] __initdata = {
+ &sci_device,
+ &rtc_device,
+};
+
+static int __init sh770x_devices_setup(void)
+{
+ return platform_add_devices(sh770x_devices,
+ ARRAY_SIZE(sh770x_devices));
+}
+__initcall(sh770x_devices_setup);
+
+#define INTC_ICR1 0xa4000010UL
+#define INTC_ICR1_IRQLVL (1<<14)
+
+void __init plat_irq_setup_pins(int mode)
+{
+ if (mode == IRQ_MODE_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
+ register_intc_controller(&intc_desc_irq);
+ return;
+#endif
+ }
+ BUG();
+}
+
+void __init plat_irq_setup(void)
+{
+ register_intc_controller(&intc_desc);
+}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 1322848..84e5629 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -1,7 +1,7 @@
/*
- * SH7710 Setup
+ * SH3 Setup code for SH7710, SH7712
*
- * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006, 2007 Paul Mundt
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -10,8 +10,140 @@
*/
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/serial.h>
#include <asm/sci.h>
+#include <asm/rtc.h>
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+ DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ DMAC_DEI4, DMAC_DEI5,
+ IPSEC,
+ EDMAC0, EDMAC1, EDMAC2,
+ SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI,
+ SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI,
+ TMU0, TMU1, TMU2,
+ RTC_ATI, RTC_PRI, RTC_CUI,
+ WDT,
+ REF,
+
+ /* interrupt groups */
+ RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
+ INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
+ INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
+ INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+ INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920),
+ INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960),
+ INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0),
+#ifdef CONFIG_CPU_SUBTYPE_SH7710
+ INTC_VECT(IPSEC, 0xbe0),
+#endif
+ INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
+ INTC_VECT(EDMAC2, 0xc40),
+ INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20),
+ INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60),
+ INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0),
+ INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0),
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2, 0x440),
+ INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
+ INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(WDT, 0x560),
+ INTC_VECT(REF, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+ INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5),
+ INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI),
+ INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(DMAC1, 7),
+ INTC_PRIO(DMAC2, 7),
+ INTC_PRIO(SCIF0, 3),
+ INTC_PRIO(SCIF1, 3),
+ INTC_PRIO(SIOF0, 3),
+ INTC_PRIO(SIOF1, 3),
+ INTC_PRIO(EDMAC0, 5),
+ INTC_PRIO(EDMAC1, 5),
+ INTC_PRIO(EDMAC2, 5),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
+ { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+ { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+ { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
+ { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } },
+#ifdef CONFIG_CPU_SUBTYPE_SH7710
+ { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } },
+#endif
+ { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
+ { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
+ { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups,
+ priorities, NULL, prio_registers, NULL);
+
+static struct intc_vect vectors_irq[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL,
+ priorities, NULL, prio_registers, NULL);
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xa413fec0,
+ .end = 0xa413fec0 + 0x1e,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+ .capabilities = RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+ .dev = {
+ .platform_data = &rtc_info,
+ },
+};
static struct plat_sci_port sci_platform_data[] = {
{
@@ -20,7 +152,7 @@
.type = PORT_SCIF,
.irqs = { 52, 53, 55, 54 },
}, {
- .mapbase = 0xa4420000,
+ .mapbase = 0xa4410000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 56, 57, 59, 58 },
@@ -40,6 +172,7 @@
static struct platform_device *sh7710_devices[] __initdata = {
&sci_device,
+ &rtc_device,
};
static int __init sh7710_devices_setup(void)
@@ -49,59 +182,16 @@
}
__initcall(sh7710_devices_setup);
-static struct ipr_data ipr_irq_table[] = {
- /* IRQ, IPR-idx, shift, priority */
- { 16, 0, 12, 2 }, /* TMU0 TUNI*/
- { 17, 0, 8, 2 }, /* TMU1 TUNI */
- { 18, 0, 4, 2 }, /* TMU2 TUNI */
- { 27, 1, 12, 2 }, /* WDT ITI */
- { 20, 0, 0, 2 }, /* RTC ATI (alarm) */
- { 21, 0, 0, 2 }, /* RTC PRI (period) */
- { 22, 0, 0, 2 }, /* RTC CUI (carry) */
- { 48, 4, 12, 7 }, /* DMAC DMTE0 */
- { 49, 4, 12, 7 }, /* DMAC DMTE1 */
- { 50, 4, 12, 7 }, /* DMAC DMTE2 */
- { 51, 4, 12, 7 }, /* DMAC DMTE3 */
- { 52, 4, 8, 3 }, /* SCIF0 ERI */
- { 53, 4, 8, 3 }, /* SCIF0 RXI */
- { 54, 4, 8, 3 }, /* SCIF0 BRI */
- { 55, 4, 8, 3 }, /* SCIF0 TXI */
- { 56, 4, 4, 3 }, /* SCIF1 ERI */
- { 57, 4, 4, 3 }, /* SCIF1 RXI */
- { 58, 4, 4, 3 }, /* SCIF1 BRI */
- { 59, 4, 4, 3 }, /* SCIF1 TXI */
- { 76, 5, 8, 7 }, /* DMAC DMTE4 */
- { 77, 5, 8, 7 }, /* DMAC DMTE5 */
- { 80, 6, 12, 5 }, /* EDMAC EINT0 */
- { 81, 6, 8, 5 }, /* EDMAC EINT1 */
- { 82, 6, 4, 5 }, /* EDMAC EINT2 */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xA414FEE2, /* 0: IPRA */
- 0xA414FEE4, /* 1: IPRB */
- 0xA4140016, /* 2: IPRC */
- 0xA4140018, /* 3: IPRD */
- 0xA414001A, /* 4: IPRE */
- 0xA4080000, /* 5: IPRF */
- 0xA4080002, /* 6: IPRG */
- 0xA4080004, /* 7: IPRH */
- 0xA4080006, /* 8: IPRI */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7710",
- },
-};
+void __init plat_irq_setup_pins(int mode)
+{
+ if (mode == IRQ_MODE_IRQ) {
+ register_intc_controller(&intc_desc_irq);
+ return;
+ }
+ BUG();
+}
void __init plat_irq_setup(void)
{
- register_ipr_controller(&ipr_irq_desc);
+ register_intc_controller(&intc_desc);
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
new file mode 100644
index 0000000..a0929b8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -0,0 +1,210 @@
+/*
+ * SH7720 Setup
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
+ *
+ * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006 Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+#include <asm/rtc.h>
+
+#define INTC_ICR1 0xA4140010UL
+#define INTC_ICR_IRLM 0x4000
+#define INTC_ICR_IRQ (~INTC_ICR_IRLM)
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xa413fec0,
+ .end = 0xa413fec0 + 0x28 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_rtc_platform_info rtc_info = {
+ .capabilities = RTC_CAP_4_DIGIT_YEAR,
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+ .dev = {
+ .platform_data = &rtc_info,
+ },
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xa4430000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ }, {
+ .mapbase = 0xa4438000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ }, {
+
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7720_devices[] __initdata = {
+ &rtc_device,
+ &sci_device,
+};
+
+static int __init sh7720_devices_setup(void)
+{
+ return platform_add_devices(sh7720_devices,
+ ARRAY_SIZE(sh7720_devices));
+}
+__initcall(sh7720_devices_setup);
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI,
+ WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+ IRQ0, IRQ1, IRQ2, IRQ3,
+ USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
+ DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL,
+ ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT,
+ SCIF0, SCIF1,
+ PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC,
+ SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC,
+ USBHI, AFEIF,
+ H_UDI,
+ /* interrupt groups */
+ TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480),
+ INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500),
+ INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540),
+ INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580),
+ /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0),
+ INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800),
+ INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840),
+ INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900),
+ INTC_VECT(SSL, 0x980), INTC_VECT(USBFI0, 0xa20),
+ INTC_VECT(USBFI1, 0xa40), INTC_VECT(USBHI, 0xa60),
+ INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0),
+ INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00),
+ INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80),
+ INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00),
+ INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80),
+ INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0),
+ INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00),
+ INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0),
+ INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0),
+ INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60),
+ INTC_VECT(AFEIF, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(TMU, TMU0, TMU1, TMU2),
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
+ INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3),
+ INTC_GROUP(USBFI, USBFI0, USBFI1),
+ INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5),
+ INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3),
+ INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(SCIF0, 2),
+ INTC_PRIO(SCIF1, 2),
+ INTC_PRIO(DMAC1, 1),
+ INTC_PRIO(DMAC2, 1),
+ INTC_PRIO(RTC, 2),
+ INTC_PRIO(TMU, 2),
+ INTC_PRIO(TPU, 2),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
+ { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+ { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
+ { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
+ { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
+ { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
+ { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
+ { 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
+ { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
+ priorities, NULL, prio_registers, NULL);
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static struct intc_vect vectors_irq[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+};
+
+static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq,
+ NULL, priorities, NULL, prio_registers, sense_registers);
+
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ:
+ ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1);
+ register_intc_controller(&intc_irq_desc);
+ break;
+ default:
+ BUG();
+ }
+}
+
+void __init plat_irq_setup(void)
+{
+ register_intc_controller(&intc_desc);
+}
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 98d28fb..21375d7 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -3,7 +3,7 @@
*
* CPU Subtype Probing for SH-4.
*
- * Copyright (C) 2001 - 2006 Paul Mundt
+ * Copyright (C) 2001 - 2007 Paul Mundt
* Copyright (C) 2003 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -12,7 +12,6 @@
*/
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/cache.h>
@@ -36,37 +35,34 @@
/*
* Setup some sane SH-4 defaults for the icache
*/
- current_cpu_data.icache.way_incr = (1 << 13);
- current_cpu_data.icache.entry_shift = 5;
- current_cpu_data.icache.sets = 256;
- current_cpu_data.icache.ways = 1;
- current_cpu_data.icache.linesz = L1_CACHE_BYTES;
+ boot_cpu_data.icache.way_incr = (1 << 13);
+ boot_cpu_data.icache.entry_shift = 5;
+ boot_cpu_data.icache.sets = 256;
+ boot_cpu_data.icache.ways = 1;
+ boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
/*
* And again for the dcache ..
*/
- current_cpu_data.dcache.way_incr = (1 << 14);
- current_cpu_data.dcache.entry_shift = 5;
- current_cpu_data.dcache.sets = 512;
- current_cpu_data.dcache.ways = 1;
- current_cpu_data.dcache.linesz = L1_CACHE_BYTES;
+ boot_cpu_data.dcache.way_incr = (1 << 14);
+ boot_cpu_data.dcache.entry_shift = 5;
+ boot_cpu_data.dcache.sets = 512;
+ boot_cpu_data.dcache.ways = 1;
+ boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
/*
- * Setup some generic flags we can probe
- * (L2 and DSP detection only work on SH-4A)
+ * Setup some generic flags we can probe on SH-4A parts
*/
if (((pvr >> 16) & 0xff) == 0x10) {
- if ((cvr & 0x02000000) == 0)
- current_cpu_data.flags |= CPU_HAS_L2_CACHE;
if ((cvr & 0x10000000) == 0)
- current_cpu_data.flags |= CPU_HAS_DSP;
+ boot_cpu_data.flags |= CPU_HAS_DSP;
- current_cpu_data.flags |= CPU_HAS_LLSC;
+ boot_cpu_data.flags |= CPU_HAS_LLSC;
}
/* FPU detection works for everyone */
if ((cvr & 0x20000000) == 1)
- current_cpu_data.flags |= CPU_HAS_FPU;
+ boot_cpu_data.flags |= CPU_HAS_FPU;
/* Mask off the upper chip ID */
pvr &= 0xffff;
@@ -77,140 +73,140 @@
*/
switch (pvr) {
case 0x205:
- current_cpu_data.type = CPU_SH7750;
- current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
+ boot_cpu_data.type = CPU_SH7750;
+ boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
CPU_HAS_PERF_COUNTER;
break;
case 0x206:
- current_cpu_data.type = CPU_SH7750S;
- current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
+ boot_cpu_data.type = CPU_SH7750S;
+ boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
CPU_HAS_PERF_COUNTER;
break;
case 0x1100:
- current_cpu_data.type = CPU_SH7751;
- current_cpu_data.flags |= CPU_HAS_FPU;
+ boot_cpu_data.type = CPU_SH7751;
+ boot_cpu_data.flags |= CPU_HAS_FPU;
break;
case 0x2001:
case 0x2004:
- current_cpu_data.type = CPU_SH7770;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
+ boot_cpu_data.type = CPU_SH7770;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC;
+ boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC;
break;
case 0x2006:
case 0x200A:
if (prr == 0x61)
- current_cpu_data.type = CPU_SH7781;
+ boot_cpu_data.type = CPU_SH7781;
else
- current_cpu_data.type = CPU_SH7780;
+ boot_cpu_data.type = CPU_SH7780;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
CPU_HAS_LLSC;
break;
case 0x3000:
case 0x3003:
case 0x3009:
- current_cpu_data.type = CPU_SH7343;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_LLSC;
+ boot_cpu_data.type = CPU_SH7343;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.flags |= CPU_HAS_LLSC;
break;
case 0x3004:
case 0x3007:
- current_cpu_data.type = CPU_SH7785;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ boot_cpu_data.type = CPU_SH7785;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
CPU_HAS_LLSC;
break;
case 0x3008:
if (prr == 0xa0) {
- current_cpu_data.type = CPU_SH7722;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_LLSC;
+ boot_cpu_data.type = CPU_SH7722;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */
- current_cpu_data.type = CPU_SHX3;
- current_cpu_data.icache.ways = 4;
- current_cpu_data.dcache.ways = 4;
- current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ boot_cpu_data.type = CPU_SHX3;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
CPU_HAS_LLSC;
break;
case 0x8000:
- current_cpu_data.type = CPU_ST40RA;
- current_cpu_data.flags |= CPU_HAS_FPU;
+ boot_cpu_data.type = CPU_ST40RA;
+ boot_cpu_data.flags |= CPU_HAS_FPU;
break;
case 0x8100:
- current_cpu_data.type = CPU_ST40GX1;
- current_cpu_data.flags |= CPU_HAS_FPU;
+ boot_cpu_data.type = CPU_ST40GX1;
+ boot_cpu_data.flags |= CPU_HAS_FPU;
break;
case 0x700:
- current_cpu_data.type = CPU_SH4_501;
- current_cpu_data.icache.ways = 2;
- current_cpu_data.dcache.ways = 2;
+ boot_cpu_data.type = CPU_SH4_501;
+ boot_cpu_data.icache.ways = 2;
+ boot_cpu_data.dcache.ways = 2;
break;
case 0x600:
- current_cpu_data.type = CPU_SH4_202;
- current_cpu_data.icache.ways = 2;
- current_cpu_data.dcache.ways = 2;
- current_cpu_data.flags |= CPU_HAS_FPU;
+ boot_cpu_data.type = CPU_SH4_202;
+ boot_cpu_data.icache.ways = 2;
+ boot_cpu_data.dcache.ways = 2;
+ boot_cpu_data.flags |= CPU_HAS_FPU;
break;
case 0x500 ... 0x501:
switch (prr) {
case 0x10:
- current_cpu_data.type = CPU_SH7750R;
+ boot_cpu_data.type = CPU_SH7750R;
break;
case 0x11:
- current_cpu_data.type = CPU_SH7751R;
+ boot_cpu_data.type = CPU_SH7751R;
break;
case 0x50 ... 0x5f:
- current_cpu_data.type = CPU_SH7760;
+ boot_cpu_data.type = CPU_SH7760;
break;
}
- current_cpu_data.icache.ways = 2;
- current_cpu_data.dcache.ways = 2;
+ boot_cpu_data.icache.ways = 2;
+ boot_cpu_data.dcache.ways = 2;
- current_cpu_data.flags |= CPU_HAS_FPU;
+ boot_cpu_data.flags |= CPU_HAS_FPU;
break;
default:
- current_cpu_data.type = CPU_SH_NONE;
+ boot_cpu_data.type = CPU_SH_NONE;
break;
}
#ifdef CONFIG_SH_DIRECT_MAPPED
- current_cpu_data.icache.ways = 1;
- current_cpu_data.dcache.ways = 1;
+ boot_cpu_data.icache.ways = 1;
+ boot_cpu_data.dcache.ways = 1;
#endif
#ifdef CONFIG_CPU_HAS_PTEA
- current_cpu_data.flags |= CPU_HAS_PTEA;
+ boot_cpu_data.flags |= CPU_HAS_PTEA;
#endif
/*
* On anything that's not a direct-mapped cache, look to the CVR
* for I/D-cache specifics.
*/
- if (current_cpu_data.icache.ways > 1) {
+ if (boot_cpu_data.icache.ways > 1) {
size = sizes[(cvr >> 20) & 0xf];
- current_cpu_data.icache.way_incr = (size >> 1);
- current_cpu_data.icache.sets = (size >> 6);
+ boot_cpu_data.icache.way_incr = (size >> 1);
+ boot_cpu_data.icache.sets = (size >> 6);
}
/* And the rest of the D-cache */
- if (current_cpu_data.dcache.ways > 1) {
+ if (boot_cpu_data.dcache.ways > 1) {
size = sizes[(cvr >> 16) & 0xf];
- current_cpu_data.dcache.way_incr = (size >> 1);
- current_cpu_data.dcache.sets = (size >> 6);
+ boot_cpu_data.dcache.way_incr = (size >> 1);
+ boot_cpu_data.dcache.sets = (size >> 6);
}
/*
@@ -218,7 +214,7 @@
*
* SH-4A's have an optional PIPT L2.
*/
- if (current_cpu_data.flags & CPU_HAS_L2_CACHE) {
+ if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
/*
* Size calculation is much more sensible
* than it is for the L1.
@@ -229,22 +225,22 @@
BUG_ON(!size);
- current_cpu_data.scache.way_incr = (1 << 16);
- current_cpu_data.scache.entry_shift = 5;
- current_cpu_data.scache.ways = 4;
- current_cpu_data.scache.linesz = L1_CACHE_BYTES;
+ boot_cpu_data.scache.way_incr = (1 << 16);
+ boot_cpu_data.scache.entry_shift = 5;
+ boot_cpu_data.scache.ways = 4;
+ boot_cpu_data.scache.linesz = L1_CACHE_BYTES;
- current_cpu_data.scache.entry_mask =
- (current_cpu_data.scache.way_incr -
- current_cpu_data.scache.linesz);
+ boot_cpu_data.scache.entry_mask =
+ (boot_cpu_data.scache.way_incr -
+ boot_cpu_data.scache.linesz);
- current_cpu_data.scache.sets = size /
- (current_cpu_data.scache.linesz *
- current_cpu_data.scache.ways);
+ boot_cpu_data.scache.sets = size /
+ (boot_cpu_data.scache.linesz *
+ boot_cpu_data.scache.ways);
- current_cpu_data.scache.way_size =
- (current_cpu_data.scache.sets *
- current_cpu_data.scache.linesz);
+ boot_cpu_data.scache.way_size =
+ (boot_cpu_data.scache.sets *
+ boot_cpu_data.scache.linesz);
}
return 0;
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index f2286de..523f68a 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -104,7 +104,7 @@
DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF,
};
-static struct intc_vect vectors[] = {
+static struct intc_vect vectors[] __initdata = {
INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
@@ -118,7 +118,7 @@
INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0),
};
-static struct intc_group groups[] = {
+static struct intc_group groups[] __initdata = {
INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI),
@@ -126,20 +126,20 @@
INTC_GROUP(REF, REF_RCMI, REF_ROVI),
};
-static struct intc_prio priorities[] = {
+static struct intc_prio priorities[] __initdata = {
INTC_PRIO(SCIF, 3),
INTC_PRIO(SCI1, 3),
INTC_PRIO(DMAC, 7),
};
-static struct intc_prio_reg prio_registers[] = {
- { 0xffd00004, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
- { 0xffd00008, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } },
- { 0xffd0000c, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } },
- { 0xffd00010, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
- { 0xfe080000, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0,
- TMU4, TMU3,
- PCIC1, PCIC0_PCISERR } },
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } },
+ { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } },
+ { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+ { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0,
+ TMU4, TMU3,
+ PCIC1, PCIC0_PCISERR } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups,
@@ -150,13 +150,13 @@
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7091)
-static struct intc_vect vectors_dma4[] = {
+static struct intc_vect vectors_dma4[] __initdata = {
INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
INTC_VECT(DMAC_DMAE, 0x6c0),
};
-static struct intc_group groups_dma4[] = {
+static struct intc_group groups_dma4[] __initdata = {
INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
DMAC_DMTE3, DMAC_DMAE),
};
@@ -168,7 +168,7 @@
/* SH7750R and SH7751R both have 8-channel DMA controllers */
#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_dma8[] = {
+static struct intc_vect vectors_dma8[] __initdata = {
INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0),
@@ -176,7 +176,7 @@
INTC_VECT(DMAC_DMAE, 0x6c0),
};
-static struct intc_group groups_dma8[] = {
+static struct intc_group groups_dma8[] __initdata = {
INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5,
DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE),
@@ -191,11 +191,11 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_tmu34[] = {
+static struct intc_vect vectors_tmu34[] __initdata = {
INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80),
};
-static struct intc_mask_reg mask_registers[] = {
+static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, TMU4, TMU3,
@@ -210,7 +210,7 @@
#endif
/* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */
-static struct intc_vect vectors_irlm[] = {
+static struct intc_vect vectors_irlm[] __initdata = {
INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
};
@@ -220,14 +220,14 @@
/* SH7751 and SH7751R both have PCI */
#if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
-static struct intc_vect vectors_pci[] = {
+static struct intc_vect vectors_pci[] __initdata = {
INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0),
INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0),
INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60),
INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20),
};
-static struct intc_group groups_pci[] = {
+static struct intc_group groups_pci[] __initdata = {
INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3),
};
@@ -282,13 +282,19 @@
#define INTC_ICR 0xffd00000UL
#define INTC_ICR_IRLM (1<<7)
-/* enable individual interrupt mode for external interupts */
-void __init ipr_irq_enable_irlm(void)
+void __init plat_irq_setup_pins(int mode)
{
#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091)
BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */
+ return;
#endif
- register_intc_controller(&intc_desc_irlm);
- ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+ switch (mode) {
+ case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
+ ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+ register_intc_controller(&intc_desc_irlm);
+ break;
+ default:
+ BUG();
+ }
}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 47fa270..7a898cb 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -12,6 +12,136 @@
#include <linux/serial.h>
#include <asm/sci.h>
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRL0, IRL1, IRL2, IRL3,
+ HUDI, GPIOI,
+ DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3,
+ DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7,
+ DMAC_DMAE,
+ IRQ4, IRQ5, IRQ6, IRQ7,
+ HCAN20, HCAN21,
+ SSI0, SSI1,
+ HAC0, HAC1,
+ I2C0, I2C1,
+ USB, LCDC,
+ DMABRG0, DMABRG1, DMABRG2,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+ HSPI,
+ MMCIF0, MMCIF1, MMCIF2, MMCIF3,
+ MFI, ADC, CMT,
+ TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
+ WDT,
+ REF_RCMI, REF_ROVI,
+
+ /* interrupt groups */
+ DMAC, DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, TMU2, REF,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
+ INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
+ INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
+ INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0),
+ INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0),
+ INTC_VECT(DMAC_DMAE, 0x6c0),
+ INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
+ INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
+ INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
+ INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960),
+ INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0),
+ INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0),
+ INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20),
+ INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0),
+ INTC_VECT(DMABRG2, 0xac0),
+ INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
+ INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+ INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20),
+ INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60),
+ INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0),
+ INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0),
+ INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20),
+ INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60),
+ INTC_VECT(HSPI, 0xc80),
+ INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20),
+ INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60),
+ INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
+ INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+ INTC_VECT(WDT, 0x560),
+ INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
+ DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5,
+ DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE),
+ INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+ INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
+ INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
+ INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
+ INTC_GROUP(REF, REF_RCMI, REF_ROVI),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(SCIF0, 3),
+ INTC_PRIO(SCIF1, 3),
+ INTC_PRIO(SCIF2, 3),
+ INTC_PRIO(SIM, 3),
+ INTC_PRIO(DMAC, 7),
+ INTC_PRIO(DMABRG, 13),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */
+ { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21,
+ SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC,
+ 0, DMABRG0, DMABRG1, DMABRG2,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } },
+ { 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */
+ { 0, 0, 0, 0, 0, 0, 0, 0,
+ SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
+ HSPI, MMCIF0, MMCIF1, MMCIF2,
+ MMCIF3, 0, 0, 0, 0, 0, 0, 0,
+ 0, MFI, 0, 0, 0, 0, ADC, CMT, } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+ { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
+ { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } },
+ { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+ { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1,
+ HAC0, HAC1, I2C0, I2C1 } },
+ { 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0,
+ SCIF1, SCIF2, SIM, HSPI } },
+ { 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0,
+ MFI, 0, ADC, CMT } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups,
+ priorities, mask_registers, prio_registers, NULL);
+
+static struct intc_vect vectors_irq[] __initdata = {
+ INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
+ INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
+ priorities, mask_registers, prio_registers, NULL);
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xfe600000,
@@ -29,6 +159,11 @@
.type = PORT_SCIF,
.irqs = { 76, 77, 79, 78 },
}, {
+ .mapbase = 0xfe480000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 80, 81, 82, 0 },
+ }, {
.flags = 0,
}
};
@@ -52,114 +187,18 @@
}
__initcall(sh7760_devices_setup);
-static struct intc2_data intc2_irq_table[] = {
- {48, 0, 28, 0, 31, 3}, /* IRQ 4 */
- {49, 0, 24, 0, 30, 3}, /* IRQ 3 */
- {50, 0, 20, 0, 29, 3}, /* IRQ 2 */
- {51, 0, 16, 0, 28, 3}, /* IRQ 1 */
- {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */
- {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */
- {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */
- {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */
- {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */
- {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */
- {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */
- {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */
- {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */
- {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */
- {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */
- {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */
- {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */
- {65, 8, 24, 0, 16, 3}, /* LCDC */
- {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */
- {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */
- {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */
- {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */
- {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */
- {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */
- {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */
- {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */
- {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */
- {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */
- {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */
- {80, 8, 4, 4, 23, 3}, /* SIM_ERI */
- {81, 8, 4, 4, 22, 3}, /* SIM_RXI */
- {82, 8, 4, 4, 21, 3}, /* SIM_TXI */
- {83, 8, 4, 4, 20, 3}, /* SIM_TEI */
- {84, 8, 0, 4, 19, 3}, /* HSPII */
- {88, 12, 20, 4, 18, 3}, /* MMCI0 */
- {89, 12, 20, 4, 17, 3}, /* MMCI1 */
- {90, 12, 20, 4, 16, 3}, /* MMCI2 */
- {91, 12, 20, 4, 15, 3}, /* MMCI3 */
- {92, 12, 12, 4, 6, 3}, /* MFI */
- {108,12, 4, 4, 1, 3}, /* ADC */
- {109,12, 0, 4, 0, 3}, /* CMTI */
-};
-
-static struct intc2_desc intc2_irq_desc __read_mostly = {
- .prio_base = 0xfe080000,
- .msk_base = 0xfe080040,
- .mskclr_base = 0xfe080060,
-
- .intc2_data = intc2_irq_table,
- .nr_irqs = ARRAY_SIZE(intc2_irq_table),
-
- .chip = {
- .name = "INTC2-sh7760",
- },
-};
-
-static struct ipr_data ipr_irq_table[] = {
- /* IRQ, IPR-idx, shift, priority */
- { 16, 0, 12, 2 }, /* TMU0 TUNI*/
- { 17, 0, 8, 2 }, /* TMU1 TUNI */
- { 18, 0, 4, 2 }, /* TMU2 TUNI */
- { 19, 0, 4, 2 }, /* TMU2 TIPCI */
- { 27, 1, 12, 2 }, /* WDT ITI */
- { 28, 1, 8, 2 }, /* REF RCMI */
- { 29, 1, 8, 2 }, /* REF ROVI */
- { 32, 2, 0, 7 }, /* HUDI */
- { 33, 2, 12, 7 }, /* GPIOI */
- { 34, 2, 8, 7 }, /* DMAC DMTE0 */
- { 35, 2, 8, 7 }, /* DMAC DMTE1 */
- { 36, 2, 8, 7 }, /* DMAC DMTE2 */
- { 37, 2, 8, 7 }, /* DMAC DMTE3 */
- { 38, 2, 8, 7 }, /* DMAC DMAE */
- { 44, 2, 8, 7 }, /* DMAC DMTE4 */
- { 45, 2, 8, 7 }, /* DMAC DMTE5 */
- { 46, 2, 8, 7 }, /* DMAC DMTE6 */
- { 47, 2, 8, 7 }, /* DMAC DMTE7 */
-/* these here are only valid if INTC_ICR bit 7 is set to 1!
- * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */
-#if 0
- { 2, 3, 12, 3 }, /* IRL0 */
- { 5, 3, 8, 3 }, /* IRL1 */
- { 8, 3, 4, 3 }, /* IRL2 */
- { 11, 3, 0, 3 }, /* IRL3 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
- 0xffd00004UL, /* 0: IPRA */
- 0xffd00008UL, /* 1: IPRB */
- 0xffd0000cUL, /* 2: IPRC */
- 0xffd00010UL, /* 3: IPRD */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7760",
- },
-};
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ:
+ register_intc_controller(&intc_desc_irq);
+ break;
+ default:
+ BUG();
+ }
+}
void __init plat_irq_setup(void)
{
- register_intc2_controller(&intc2_irq_desc);
- register_ipr_controller(&ipr_irq_desc);
+ register_intc_controller(&intc_desc);
}
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index c21512c..b22a78c 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -58,11 +58,11 @@
*/
void sq_flush_range(unsigned long start, unsigned int len)
{
- volatile unsigned long *sq = (unsigned long *)start;
+ unsigned long *sq = (unsigned long *)start;
/* Flush the queues */
for (len >>= 5; len--; sq += 8)
- prefetchw((void *)sq);
+ prefetchw(sq);
/* Wait for completion */
store_queue_barrier();
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index e6a1fb5..2453987 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -10,6 +10,9 @@
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
+# SMP setup
+smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o
+
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
@@ -18,4 +21,5 @@
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
-obj-y += $(clock-y)
+obj-y += $(clock-y)
+obj-$(CONFIG_SMP) += $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 91d61cf..c0a3f07 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -41,3 +41,7 @@
ARRAY_SIZE(sh7343_devices));
}
__initcall(sh7343_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 25b913e..55f6610 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -84,7 +84,7 @@
SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
};
-static struct intc_vect vectors[] = {
+static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
@@ -117,7 +117,7 @@
INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
};
-static struct intc_group groups[] = {
+static struct intc_group groups[] __initdata = {
INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
@@ -130,7 +130,7 @@
INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
-static struct intc_prio priorities[] = {
+static struct intc_prio priorities[] __initdata = {
INTC_PRIO(SCIF0, 3),
INTC_PRIO(SCIF1, 3),
INTC_PRIO(SCIF2, 3),
@@ -138,7 +138,7 @@
INTC_PRIO(TMU1, 2),
};
-static struct intc_mask_reg mask_registers[] = {
+static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ } },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
@@ -168,24 +168,24 @@
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static struct intc_prio_reg prio_registers[] = {
- { 0xa4080000, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } },
- { 0xa4080004, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
- { 0xa4080008, 16, 4, /* IPRC */ { } },
- { 0xa408000c, 16, 4, /* IPRD */ { } },
- { 0xa4080010, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } },
- { 0xa4080014, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
- { 0xa4080018, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } },
- { 0xa408001c, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } },
- { 0xa4080020, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } },
- { 0xa4080024, 16, 4, /* IPRJ */ { 0, 0, SIU } },
- { 0xa4080028, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } },
- { 0xa408002c, 16, 4, /* IPRL */ { TWODG, 0, TPU } },
- { 0xa4140010, 32, 4, /* INTPRI00 */
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } },
+ { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+ { 0xa4080008, 0, 16, 4, /* IPRC */ { } },
+ { 0xa408000c, 0, 16, 4, /* IPRD */ { } },
+ { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } },
+ { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+ { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } },
+ { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } },
+ { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } },
+ { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
+ { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } },
+ { 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } },
+ { 0xa4140010, 0, 32, 4, /* INTPRI00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static struct intc_sense_reg sense_registers[] = {
+static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa414001c, 16, 2, /* ICR1 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 6a04cc5..32f4f59 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -51,3 +51,7 @@
ARRAY_SIZE(sh7770_devices));
}
__initcall(sh7770_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index a4127ec..e8fd33f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -10,6 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/io.h>
#include <asm/sci.h>
static struct resource rtc_resources[] = {
@@ -114,7 +115,7 @@
PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO,
};
-static struct intc_vect vectors[] = {
+static struct intc_vect vectors[] __initdata = {
INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
INTC_VECT(RTC_CUI, 0x4c0),
INTC_VECT(WDT, 0x560),
@@ -150,7 +151,7 @@
INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
};
-static struct intc_group groups[] = {
+static struct intc_group groups[] __initdata = {
INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
@@ -167,12 +168,12 @@
INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
};
-static struct intc_prio priorities[] = {
+static struct intc_prio priorities[] __initdata = {
INTC_PRIO(SCIF0, 3),
INTC_PRIO(SCIF1, 3),
};
-static struct intc_mask_reg mask_registers[] = {
+static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
{ 0, 0, 0, 0, 0, 0, GPIO, FLCTL,
SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
@@ -180,16 +181,18 @@
HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
};
-static struct intc_prio_reg prio_registers[] = {
- { 0xffd40000, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, TMU2, TMU2_TICPI } },
- { 0xffd40004, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
- { 0xffd40008, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
- { 0xffd4000c, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } },
- { 0xffd40010, 32, 8, /* INT2PRI4 */ { CMT, HAC, PCISERR, PCIINTA, } },
- { 0xffd40014, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
- PCIINTD, PCIC5 } },
- { 0xffd40018, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } },
- { 0xffd4001c, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
+ TMU2, TMU2_TICPI } },
+ { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
+ { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
+ { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } },
+ { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
+ PCISERR, PCIINTA, } },
+ { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
+ PCIINTD, PCIC5 } },
+ { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } },
+ { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, priorities,
@@ -197,24 +200,24 @@
/* Support for external interrupt pins in IRQ mode */
-static struct intc_vect irq_vectors[] = {
+static struct intc_vect irq_vectors[] __initdata = {
INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
};
-static struct intc_mask_reg irq_mask_registers[] = {
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static struct intc_prio_reg irq_prio_registers[] = {
- { 0xffd00010, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
- IRQ4, IRQ5, IRQ6, IRQ7 } },
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+ { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static struct intc_sense_reg irq_sense_registers[] = {
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
{ 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
IRQ4, IRQ5, IRQ6, IRQ7 } },
};
@@ -225,7 +228,7 @@
/* External interrupt pins in IRL mode */
-static struct intc_vect irl_vectors[] = {
+static struct intc_vect irl_vectors[] __initdata = {
INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
@@ -236,16 +239,16 @@
INTC_VECT(IRL_HHHL, 0x3c0),
};
-static struct intc_mask_reg irl3210_mask_registers[] = {
- { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
{ IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
};
-static struct intc_mask_reg irl7654_mask_registers[] = {
- { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
@@ -259,8 +262,28 @@
static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
NULL, NULL, irl3210_mask_registers, NULL, NULL);
+#define INTC_ICR0 0xffd00000
+#define INTC_INTMSK0 0xffd00044
+#define INTC_INTMSK1 0xffd00048
+#define INTC_INTMSK2 0xffd40080
+#define INTC_INTMSKCLR1 0xffd00068
+#define INTC_INTMSKCLR2 0xffd40084
+
void __init plat_irq_setup(void)
{
+ /* disable IRQ7-0 */
+ ctrl_outl(0xff000000, INTC_INTMSK0);
+
+ /* disable IRL3-0 + IRL7-4 */
+ ctrl_outl(0xc0000000, INTC_INTMSK1);
+ ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+ /* select IRL mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+ /* disable holding function, ie enable "SH-4 Mode" */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
register_intc_controller(&intc_desc);
}
@@ -268,12 +291,28 @@
{
switch (mode) {
case IRQ_MODE_IRQ:
+ /* select IRQ mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
- register_intc_controller(&intc_irl7654_desc);
+ /* enable IRL7-4 but don't provide any masking */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
+ /* enable IRL0-3 but don't provide any masking */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL7654_MASK:
+ /* enable IRL7-4 and mask using cpu intc controller */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_irl7654_desc);
+ break;
+ case IRQ_MODE_IRL3210_MASK:
+ /* enable IRL0-3 and mask using cpu intc controller */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index cf04756..39b215d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -10,6 +10,9 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <asm/mmzone.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
@@ -72,46 +75,281 @@
}
__initcall(sh7785_devices_setup);
-static struct intc2_data intc2_irq_table[] = {
- { 28, 0, 24, 0, 0, 2 }, /* TMU0 */
+enum {
+ UNUSED = 0,
- { 40, 8, 24, 0, 2, 3 }, /* SCIF0 ERI */
- { 41, 8, 24, 0, 2, 3 }, /* SCIF0 RXI */
- { 42, 8, 24, 0, 2, 3 }, /* SCIF0 BRI */
- { 43, 8, 24, 0, 2, 3 }, /* SCIF0 TXI */
+ /* interrupt sources */
- { 44, 8, 16, 0, 3, 3 }, /* SCIF1 ERI */
- { 45, 8, 16, 0, 3, 3 }, /* SCIF1 RXI */
- { 46, 8, 16, 0, 3, 3 }, /* SCIF1 BRI */
- { 47, 8, 16, 0, 3, 3 }, /* SCIF1 TXI */
+ IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+ IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+ IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+ IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
- { 64, 0x14, 8, 0, 14, 2 }, /* PCIC0 */
- { 65, 0x14, 0, 0, 15, 2 }, /* PCIC1 */
- { 66, 0x18, 24, 0, 16, 2 }, /* PCIC2 */
- { 67, 0x18, 16, 0, 17, 2 }, /* PCIC3 */
- { 68, 0x18, 8, 0, 18, 2 }, /* PCIC4 */
+ IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+ IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+ IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+ IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
- { 60, 8, 8, 0, 4, 3 }, /* SCIF2 ERI, RXI, BRI, TXI */
- { 60, 8, 0, 0, 5, 3 }, /* SCIF3 ERI, RXI, BRI, TXI */
- { 60, 12, 24, 0, 6, 3 }, /* SCIF4 ERI, RXI, BRI, TXI */
- { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ WDT,
+ TMU0, TMU1, TMU2, TMU2_TICPI,
+ HUDI,
+ DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
+ DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
+ DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
+ HSPI,
+ SCIF2, SCIF3, SCIF4, SCIF5,
+ PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
+ PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
+ SIOF,
+ MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
+ DU,
+ GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI,
+ TMU3, TMU4, TMU5,
+ SSI0, SSI1,
+ HAC0, HAC1,
+ FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1,
+ GPIOI0, GPIOI1, GPIOI2, GPIOI3,
+
+ /* interrupt groups */
+
+ TMU012, DMAC0, SCIF0, SCIF1, DMAC1,
+ PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO
};
-static struct intc2_desc intc2_irq_desc __read_mostly = {
- .prio_base = 0xffd40000,
- .msk_base = 0xffd40038,
- .mskclr_base = 0xffd4003c,
-
- .intc2_data = intc2_irq_table,
- .nr_irqs = ARRAY_SIZE(intc2_irq_table),
-
- .chip = {
- .name = "INTC2-sh7785",
- },
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(WDT, 0x560),
+ INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+ INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+ INTC_VECT(HUDI, 0x600),
+ INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640),
+ INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680),
+ INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0),
+ INTC_VECT(DMAC0_DMAE, 0x6e0),
+ INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
+ INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
+ INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
+ INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
+ INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0),
+ INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0),
+ INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920),
+ INTC_VECT(DMAC1_DMAE, 0x940),
+ INTC_VECT(HSPI, 0x960),
+ INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
+ INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
+ INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
+ INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
+ INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
+ INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
+ INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+ INTC_VECT(SIOF, 0xc00),
+ INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
+ INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
+ INTC_VECT(DU, 0xd80),
+ INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0),
+ INTC_VECT(GDTA_GAERI, 0xde0),
+ INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+ INTC_VECT(TMU5, 0xe40),
+ INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
+ INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
+ INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20),
+ INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60),
+ INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0),
+ INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
};
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+ INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+ DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+ INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
+ DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE),
+ INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
+ INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
+ INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI),
+ INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+ INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND,
+ FLCTL_FLTRQ0, FLCTL_FLTRQ1),
+ INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(SCIF0, 3),
+ INTC_PRIO(SCIF1, 3),
+ INTC_PRIO(SCIF2, 3),
+ INTC_PRIO(SCIF3, 3),
+ INTC_PRIO(SCIF4, 3),
+ INTC_PRIO(SCIF5, 3),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+ { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+ IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+ IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+ IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+ IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+ IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+ IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+ IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+
+ { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+ { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO,
+ FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB,
+ PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT,
+ SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
+ TMU2, TMU2_TICPI } },
+ { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } },
+ { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1,
+ SCIF2, SCIF3 } },
+ { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } },
+ { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } },
+ { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1,
+ PCISERR, PCIINTA } },
+ { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC,
+ PCIINTD, PCIC5 } },
+ { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } },
+ { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } },
+ { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, priorities,
+ mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+ INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+ INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+ INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+ INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
+ NULL, NULL, mask_registers, prio_registers,
+ sense_registers);
+
+static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
+ NULL, NULL, mask_registers, prio_registers,
+ sense_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl0123[] __initdata = {
+ INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+ INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+ INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+ INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+ INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+ INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+ INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+ INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+ INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
+ INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
+ INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
+ INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
+ INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
+ INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
+ INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
+ INTC_VECT(IRL4_HHHL, 0xcc0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123,
+ NULL, NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
+ NULL, NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0 0xffd00000
+#define INTC_INTMSK0 0xffd00044
+#define INTC_INTMSK1 0xffd00048
+#define INTC_INTMSK2 0xffd40080
+#define INTC_INTMSKCLR1 0xffd00068
+#define INTC_INTMSKCLR2 0xffd40084
+
void __init plat_irq_setup(void)
{
- register_intc2_controller(&intc2_irq_desc);
+ /* disable IRQ3-0 + IRQ7-4 */
+ ctrl_outl(0xff000000, INTC_INTMSK0);
+
+ /* disable IRL3-0 + IRL7-4 */
+ ctrl_outl(0xc0000000, INTC_INTMSK1);
+ ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+ /* select IRL mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+ /* disable holding function, ie enable "SH-4 Mode" */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+ register_intc_controller(&intc_desc);
}
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ7654:
+ /* select IRQ mode for IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+ register_intc_controller(&intc_desc_irq4567);
+ break;
+ case IRQ_MODE_IRQ3210:
+ /* select IRQ mode for IRL3-0 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+ register_intc_controller(&intc_desc_irq0123);
+ break;
+ case IRQ_MODE_IRL7654:
+ /* enable IRL7-4 but don't provide any masking */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL3210:
+ /* enable IRL0-3 but don't provide any masking */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL7654_MASK:
+ /* enable IRL7-4 and mask using cpu intc controller */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_desc_irl4567);
+ break;
+ case IRQ_MODE_IRL3210_MASK:
+ /* enable IRL0-3 and mask using cpu intc controller */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_desc_irl0123);
+ break;
+ default:
+ BUG();
+ }
+}
+
+void __init plat_mem_setup(void)
+{
+ /* Register the URAM space as Node 1 */
+ setup_bootmem_node(1, 0xe55f0000, 0xe5610000);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 704c064..c6cdd7e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
+#include <asm/mmzone.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
@@ -58,28 +59,229 @@
}
__initcall(shx3_devices_setup);
-static struct intc2_data intc2_irq_table[] = {
- { 16, 0, 0, 0, 1, 2 }, /* TMU0 */
- { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */
- { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */
- { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */
- { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL,
+ IRQ0, IRQ1, IRQ2, IRQ3,
+ HUDII,
+ TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
+ PCII0, PCII1, PCII2, PCII3, PCII4,
+ PCII5, PCII6, PCII7, PCII8, PCII9,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI,
+ DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
+ DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
+ DU,
+ DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
+ DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
+ IIC, VIN0, VIN1, VCORE0, ATAPI,
+ DTU0_TEND, DTU0_AE, DTU0_TMISS,
+ DTU1_TEND, DTU1_AE, DTU1_TMISS,
+ DTU2_TEND, DTU2_AE, DTU2_TMISS,
+ DTU3_TEND, DTU3_AE, DTU3_TMISS,
+ FE0, FE1,
+ GPIO0, GPIO1, GPIO2, GPIO3,
+ PAM, IRM,
+ INTICI0, INTICI1, INTICI2, INTICI3,
+ INTICI4, INTICI5, INTICI6, INTICI7,
+
+ /* interrupt groups */
+ IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
+ DMAC0, DMAC1, DTU0, DTU1, DTU2, DTU3,
};
-static struct intc2_desc intc2_irq_desc __read_mostly = {
- .prio_base = 0xfe410000,
- .msk_base = 0xfe410820,
- .mskclr_base = 0xfe410850,
-
- .intc2_data = intc2_irq_table,
- .nr_irqs = ARRAY_SIZE(intc2_irq_table),
-
- .chip = {
- .name = "INTC2-SHX3",
- },
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(HUDII, 0x3e0),
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460),
+ INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0),
+ INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520),
+ INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560),
+ INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0),
+ INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0),
+ INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620),
+ INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
+ INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
+ INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
+ INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
+ INTC_VECT(SCIF2_ERI, 0x800), INTC_VECT(SCIF2_RXI, 0x820),
+ INTC_VECT(SCIF2_BRI, 0x840), INTC_VECT(SCIF2_TXI, 0x860),
+ INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
+ INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
+ INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
+ INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960),
+ INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0),
+ INTC_VECT(DMAC0_DMAE, 0x9c0),
+ INTC_VECT(DU, 0x9e0),
+ INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20),
+ INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60),
+ INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0),
+ INTC_VECT(DMAC1_DMAE, 0xac0),
+ INTC_VECT(IIC, 0xae0),
+ INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
+ INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
+ INTC_VECT(DTU0_TEND, 0xc00), INTC_VECT(DTU0_AE, 0xc20),
+ INTC_VECT(DTU0_TMISS, 0xc40),
+ INTC_VECT(DTU1_TEND, 0xc60), INTC_VECT(DTU1_AE, 0xc80),
+ INTC_VECT(DTU1_TMISS, 0xca0),
+ INTC_VECT(DTU2_TEND, 0xcc0), INTC_VECT(DTU2_AE, 0xce0),
+ INTC_VECT(DTU2_TMISS, 0xd00),
+ INTC_VECT(DTU3_TEND, 0xd20), INTC_VECT(DTU3_AE, 0xd40),
+ INTC_VECT(DTU3_TMISS, 0xd60),
+ INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
+ INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
+ INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
+ INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0),
+ INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
+ INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
+ INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
+ INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
};
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL),
+ INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+ INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
+ INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+ DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
+ INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
+ DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
+ INTC_GROUP(DTU0, DTU0_TEND, DTU0_AE, DTU0_TMISS),
+ INTC_GROUP(DTU1, DTU1_TEND, DTU1_AE, DTU1_TMISS),
+ INTC_GROUP(DTU2, DTU2_TEND, DTU2_AE, DTU2_TMISS),
+ INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS),
+};
+
+static struct intc_prio priorities[] __initdata = {
+ INTC_PRIO(SCIF0, 3),
+ INTC_PRIO(SCIF1, 3),
+ INTC_PRIO(SCIF2, 3),
+ INTC_PRIO(SCIF3, 3),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */
+ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+ { 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */
+ { IRL } },
+ { 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */
+ { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC,
+ DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */
+ 0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, } },
+ { 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */
+ { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */
+ PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2,
+ PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11,
+ DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7,
+ DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4,
+ DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 } },
+ { 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI,
+ SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI,
+ SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI,
+ SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+
+ { 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4,
+ TMU3, TMU2, TMU1, TMU0 } },
+ { 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0,
+ SCIF3, SCIF2,
+ SCIF1, SCIF0 } },
+ { 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0,
+ PCII56789, PCII4,
+ PCII3, PCII2,
+ PCII1, PCII0 } },
+ { 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0,
+ VIN1, VIN0, IIC, DU} },
+ { 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3,
+ GPIO2, GPIO1, GPIO0, IRM } },
+ { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
+ { INTICI7, INTICI6, INTICI5, INTICI4,
+ INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, priorities,
+ mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect vectors_irq[] __initdata = {
+ INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+ INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
+ priorities, mask_registers, prio_registers,
+ sense_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect vectors_irl[] __initdata = {
+ INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+ INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+ INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+ INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+ INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+ INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+ INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+ INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
+ priorities, mask_registers, prio_registers, NULL);
+
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ:
+ register_intc_controller(&intc_desc_irq);
+ break;
+ case IRQ_MODE_IRL3210:
+ register_intc_controller(&intc_desc_irl);
+ break;
+ default:
+ BUG();
+ }
+}
+
void __init plat_irq_setup(void)
{
- register_intc2_controller(&intc2_irq_desc);
+ register_intc_controller(&intc_desc);
+}
+
+void __init plat_mem_setup(void)
+{
+ unsigned int nid = 1;
+
+ /* Register CPU#0 URAM space as Node 1 */
+ setup_bootmem_node(nid++, 0x145f0000, 0x14610000); /* CPU0 */
+
+#if 0
+ /* XXX: Not yet.. */
+ setup_bootmem_node(nid++, 0x14df0000, 0x14e10000); /* CPU1 */
+ setup_bootmem_node(nid++, 0x155f0000, 0x15610000); /* CPU2 */
+ setup_bootmem_node(nid++, 0x15df0000, 0x15e10000); /* CPU3 */
+#endif
+
+ setup_bootmem_node(nid++, 0x16000000, 0x16020000); /* CSM */
}
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
new file mode 100644
index 0000000..e5e0684
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -0,0 +1,120 @@
+/*
+ * SH-X3 SMP
+ *
+ * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+void __init plat_smp_setup(void)
+{
+ unsigned int cpu = 0;
+ int i, num;
+
+ cpus_clear(cpu_possible_map);
+ cpu_set(cpu, cpu_possible_map);
+
+ __cpu_number_map[0] = 0;
+ __cpu_logical_map[0] = 0;
+
+ /*
+ * Do this stupidly for now.. we don't have an easy way to probe
+ * for the total number of cores.
+ */
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
+ cpu_set(i, cpu_possible_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
+#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
+
+#define STBCR_MSTP 0x00000001
+#define STBCR_RESET 0x00000002
+#define STBCR_LTSLP 0x80000000
+
+#define STBCR_AP_VAL (STBCR_RESET | STBCR_LTSLP)
+
+void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
+{
+ ctrl_outl(entry_point, RESET_REG(cpu));
+
+ if (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
+ ctrl_outl(STBCR_MSTP, STBCR_REG(cpu));
+
+ while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
+ ;
+
+ /* Start up secondary processor by sending a reset */
+ ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu));
+}
+
+int plat_smp_processor_id(void)
+{
+ return ctrl_inl(0xff000048); /* CPIDR */
+}
+
+void plat_send_ipi(unsigned int cpu, unsigned int message)
+{
+ unsigned long addr = 0xfe410070 + (cpu * 4);
+
+ BUG_ON(cpu >= 4);
+ BUG_ON(message >= SMP_MSG_NR);
+
+ ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
+}
+
+struct ipi_data {
+ void (*handler)(void *);
+ void *arg;
+ unsigned int message;
+};
+
+static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
+{
+ struct ipi_data *id = arg;
+ unsigned int cpu = hard_smp_processor_id();
+ unsigned int offs = 4 * cpu;
+ unsigned int x;
+
+ x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
+ x &= (1 << (id->message << 2));
+ ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
+
+ id->handler(id->arg);
+
+ return IRQ_HANDLED;
+}
+
+static struct ipi_data ipi_handlers[SMP_MSG_NR];
+
+int plat_register_ipi_handler(unsigned int message,
+ void (*handler)(void *), void *arg)
+{
+ struct ipi_data *id = &ipi_handlers[message];
+
+ BUG_ON(SMP_MSG_NR >= 8);
+ BUG_ON(message >= SMP_MSG_NR);
+
+ id->handler = handler;
+ id->arg = arg;
+ id->message = message;
+
+ return request_irq(104 + message, ipi_interrupt_handler, 0, "IPI", id);
+}
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index 71d1c42..e0590ff 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -77,8 +77,6 @@
static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- printk(KERN_INFO "cpufreq: SuperH CPU frequency driver.\n");
-
if (!cpu_online(policy->cpu))
return -ENODEV;
@@ -143,6 +141,7 @@
static int __init sh_cpufreq_module_init(void)
{
+ printk(KERN_INFO "cpufreq: SuperH CPU frequency driver.\n");
return cpufreq_register_driver(&sh_cpufreq_driver);
}
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 80b637c..2f30977 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2002 M. R. Brown
- * Copyright (C) 2004 - 2006 Paul Mundt
+ * Copyright (C) 2004 - 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -13,6 +13,7 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/delay.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
@@ -62,6 +63,16 @@
#include <linux/serial_core.h>
#include "../../../drivers/serial/sh-sci.h"
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+#define EPK_SCSMR_VALUE 0x000
+#define EPK_SCBRR_VALUE 0x00C
+#define EPK_FIFO_SIZE 64
+#define EPK_FIFO_BITS (0x7f00 >> 8)
+#else
+#define EPK_FIFO_SIZE 16
+#define EPK_FIFO_BITS (0x1f00 >> 8)
+#endif
+
static struct uart_port scif_port = {
.mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT,
.membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
@@ -69,7 +80,7 @@
static void scif_sercon_putc(int c)
{
- while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16))
+ while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE))
;
sci_out(&scif_port, SCxTDR, c);
@@ -105,7 +116,22 @@
.index = -1,
};
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+#if !defined(CONFIG_SH_STANDARD_BIOS)
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+static void scif_sercon_init(char *s)
+{
+ sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */
+ sci_out(&scif_port, SCFCR, 0x4006); /* reset */
+ sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */
+ sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE);
+ sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE);
+
+ mdelay(1); /* wait 1-bit time */
+
+ sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */
+ sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */
+}
+#elif defined(CONFIG_CPU_SH4)
#define DEFAULT_BAUD 115200
/*
* Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
@@ -146,7 +172,8 @@
ctrl_outw(0, scif_port.mapbase + 36);
ctrl_outw(0x30, scif_port.mapbase + 8);
}
-#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
+#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
+#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
#endif /* CONFIG_EARLY_SCIF_CONSOLE */
/*
@@ -163,18 +190,13 @@
#endif
;
-static int __initdata keep_early;
-static int early_console_initialized;
-
-int __init setup_early_printk(char *buf)
+static int __init setup_early_printk(char *buf)
{
+ int keep_early = 0;
+
if (!buf)
return 0;
- if (early_console_initialized)
- return 0;
- early_console_initialized = 1;
-
if (strstr(buf, "keep"))
keep_early = 1;
@@ -186,7 +208,8 @@
if (!strncmp(buf, "serial", 6)) {
early_console = &scif_console;
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
+#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \
+ !defined(CONFIG_SH_STANDARD_BIOS)
scif_sercon_init(buf + 6);
#endif
}
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index b467280..e0317ed 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -176,7 +176,7 @@
jmp @r1
lds r0, pr
work_resched:
-#ifndef CONFIG_PREEMPT
+#if defined(CONFIG_GUSA) && !defined(CONFIG_PREEMPT)
! gUSA handling
mov.l @(OFF_SP,r15), r0 ! get user space stack pointer
mov r0, r1
diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S
index 0bccc0c..3338239 100644
--- a/arch/sh/kernel/head.S
+++ b/arch/sh/kernel/head.S
@@ -54,8 +54,8 @@
mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF
ldc r0, sr
! Initialize global interrupt mask
- mov #0, r0
#ifdef CONFIG_CPU_HAS_SR_RB
+ mov #0, r0
ldc r0, r6_bank
#endif
@@ -72,15 +72,18 @@
!
mov.l 2f, r0
mov r0, r15 ! Set initial r15 (stack pointer)
- mov #(THREAD_SIZE >> 10), r1
- shll8 r1 ! r1 = THREAD_SIZE
- shll2 r1
- sub r1, r0 !
#ifdef CONFIG_CPU_HAS_SR_RB
+ mov.l 7f, r0
ldc r0, r7_bank ! ... and initial thread_info
#endif
! Clear BSS area
+#ifdef CONFIG_SMP
+ mov.l 3f, r0
+ cmp/eq #0, r0 ! skip clear if set to zero
+ bt 10f
+#endif
+
mov.l 3f, r1
add #4, r1
mov.l 4f, r2
@@ -89,13 +92,14 @@
bf/s 9b ! while (r1 < r2)
mov.l r0,@-r2
+10:
! Additional CPU initialization
mov.l 6f, r0
jsr @r0
nop
SYNCO() ! Wait for pending instructions..
-
+
! Start kernel
mov.l 5f, r0
jmp @r0
@@ -107,8 +111,10 @@
#else
1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF
#endif
+ENTRY(stack_start)
2: .long init_thread_union+THREAD_SIZE
3: .long __bss_start
4: .long _end
5: .long start_kernel
6: .long sh_cpu_init
+7: .long init_thread_union
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index edd1ec2..2fdc700 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -150,13 +150,6 @@
char kgdb_in_gdb_mode;
char in_nmi; /* Set during NMI to prevent reentry */
int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */
-int kgdb_enabled = 1; /* Default to enabled, cmdline can disable */
-
-/* Exposed for user access */
-struct task_struct *kgdb_current;
-unsigned int kgdb_g_imask;
-int kgdb_trapa_val;
-int kgdb_excode;
/* Default values for SCI (can override via kernel args in setup.c) */
#ifndef CONFIG_KGDB_DEFPORT
@@ -616,7 +609,7 @@
else
addr = trap_registers.pc + 2;
- kgdb_flush_icache_range(addr, addr + 2);
+ flush_icache_range(addr, addr + 2);
return (short *) addr;
}
@@ -639,8 +632,7 @@
*addr = STEP_OPCODE;
/* Flush and return */
- kgdb_flush_icache_range((long) addr, (long) addr + 2);
- return;
+ flush_icache_range((long) addr, (long) addr + 2);
}
/* Undo a single step */
@@ -650,7 +642,7 @@
/* Use stepped_address in case we stopped elsewhere */
if (stepped_opcode != 0) {
*(short*)stepped_address = stepped_opcode;
- kgdb_flush_icache_range(stepped_address, stepped_address + 2);
+ flush_icache_range(stepped_address, stepped_address + 2);
}
stepped_opcode = 0;
}
@@ -736,7 +728,7 @@
ebin_to_mem(ptr, (char*)addr, length);
else
hex_to_mem(ptr, (char*)addr, length);
- kgdb_flush_icache_range(addr, addr + length);
+ flush_icache_range(addr, addr + length);
ptr = 0;
send_ok_msg();
}
@@ -815,14 +807,10 @@
/*
* Bring up the ports..
*/
-static int kgdb_serial_setup(void)
+static int __init kgdb_serial_setup(void)
{
- extern int kgdb_console_setup(struct console *co, char *options);
struct console dummy;
-
- kgdb_console_setup(&dummy, 0);
-
- return 0;
+ return kgdb_console_setup(&dummy, 0);
}
#else
#define kgdb_serial_setup() 0
@@ -833,22 +821,6 @@
{
int sigval;
- if (excep_code == NMI_VEC) {
-#ifndef CONFIG_KGDB_NMI
- printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n");
- return;
-#else /* CONFIG_KGDB_NMI */
- if (!kgdb_enabled) {
- kgdb_enabled = 1;
- kgdb_init();
- }
-#endif /* CONFIG_KGDB_NMI */
- }
-
- /* Ignore if we're disabled */
- if (!kgdb_enabled)
- return;
-
/* Enter GDB mode (e.g. after detach) */
if (!kgdb_in_gdb_mode) {
/* Do serial setup, notify user, issue preemptive ack */
@@ -959,18 +931,10 @@
/* Get excode for command loop call, user access */
asm("stc r2_bank, %0":"=r"(excep_code));
- kgdb_excode = excep_code;
-
- /* Other interesting environment items for reference */
- asm("stc r6_bank, %0":"=r"(kgdb_g_imask));
- kgdb_current = current;
- kgdb_trapa_val = trapa_value;
/* Act on the exception */
kgdb_command_loop(excep_code, trapa_value);
- kgdb_current = NULL;
-
/* Copy back the (maybe modified) registers */
for (count = 0; count < 16; count++)
regs->regs[count] = trap_registers.regs[count];
@@ -994,11 +958,8 @@
}
/* Initialise the KGDB data structures and serial configuration */
-int kgdb_init(void)
+int __init kgdb_init(void)
{
- if (!kgdb_enabled)
- return 1;
-
in_nmi = 0;
kgdb_nofault = 0;
stepped_opcode = 0;
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 15ae322..b446999 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -19,6 +19,7 @@
#include <linux/tick.h>
#include <linux/reboot.h>
#include <linux/fs.h>
+#include <linux/preempt.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
@@ -349,12 +350,11 @@
unlazy_fpu(prev, task_pt_regs(prev));
#endif
-#ifdef CONFIG_PREEMPT
+#if defined(CONFIG_GUSA) && defined(CONFIG_PREEMPT)
{
- unsigned long flags;
struct pt_regs *regs;
- local_irq_save(flags);
+ preempt_disable();
regs = task_pt_regs(prev);
if (user_mode(regs) && regs->regs[15] >= 0xc0000000) {
int offset = (int)regs->regs[15];
@@ -365,7 +365,7 @@
/* Go to rewind point */
regs->pc = regs->regs[0] + offset;
}
- local_irq_restore(flags);
+ preempt_enable_no_resched();
}
#endif
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 2cf7dec..b3027a6 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -22,6 +22,7 @@
#include <linux/mm.h>
#include <linux/kexec.h>
#include <linux/module.h>
+#include <linux/smp.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -42,7 +43,13 @@
* This value will be used at the very early stage of serial setup.
* The bigger value means no problem.
*/
-struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
+struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
+ [0] = {
+ .type = CPU_SH_NONE,
+ .loops_per_jiffy = 10000000,
+ },
+};
+EXPORT_SYMBOL(cpu_data);
/*
* The machine vector. First entry in .machvec.init, or clobbered by
@@ -272,6 +279,10 @@
sh_mv.mv_setup(cmdline_p);
paging_init();
+
+#ifdef CONFIG_SMP
+ plat_smp_setup();
+#endif
}
static const char *cpu_name[] = {
@@ -279,7 +290,7 @@
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
- [CPU_SH7712] = "SH7712",
+ [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
[CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750",
[CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R",
[CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R",
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 37aef0a..548e428 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -8,7 +8,7 @@
#include <linux/vmalloc.h>
#include <linux/pci.h>
#include <linux/irq.h>
-
+#include <asm/sections.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
@@ -43,7 +43,6 @@
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(boot_cpu_data);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(get_vm_area);
@@ -53,6 +52,7 @@
EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(__down);
EXPORT_SYMBOL(__down_interruptible);
+EXPORT_SYMBOL(__down_trylock);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
@@ -128,7 +128,8 @@
#endif /* __GNUC__ == 4 */
#endif
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+ defined(CONFIG_SH7705_CACHE_32KB))
/* needed by some modules */
EXPORT_SYMBOL(flush_cache_all);
EXPORT_SYMBOL(flush_cache_range);
@@ -136,17 +137,11 @@
EXPORT_SYMBOL(__flush_purge_region);
#endif
-#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
- defined(CONFIG_SH7705_CACHE_32KB))
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+ (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
EXPORT_SYMBOL(clear_user_page);
#endif
-EXPORT_SYMBOL(__down_trylock);
-
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(synchronize_irq);
-#endif
-
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
#ifdef CONFIG_IPV6
@@ -154,3 +149,4 @@
#endif
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(_ebss);
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index 706d81c..2f42442 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -507,13 +507,11 @@
ctrl_inw(regs->pc - 4));
break;
}
+#ifdef CONFIG_GUSA
} else {
/* gUSA handling */
-#ifdef CONFIG_PREEMPT
- unsigned long flags;
+ preempt_disable();
- local_irq_save(flags);
-#endif
if (regs->regs[15] >= 0xc0000000) {
int offset = (int)regs->regs[15];
@@ -524,8 +522,8 @@
regs->pc = regs->regs[0] + offset -
instruction_size(ctrl_inw(regs->pc-4));
}
-#ifdef CONFIG_PREEMPT
- local_irq_restore(flags);
+
+ preempt_enable_no_resched();
#endif
}
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 283e142..94075e1 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -3,69 +3,41 @@
*
* SMP support for the SuperH processors.
*
- * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ * Copyright (C) 2006 - 2007 Akio Idehara
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
#include <linux/err.h>
#include <linux/cache.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <linux/threads.h>
+#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
+#include <linux/interrupt.h>
#include <asm/atomic.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/sections.h>
-/*
- * This was written with the Sega Saturn (SMP SH-2 7604) in mind,
- * but is designed to be usable regardless if there's an MMU
- * present or not.
- */
-struct sh_cpuinfo cpu_data[NR_CPUS];
-
-extern void per_cpu_trap_init(void);
+int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
+int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */
cpumask_t cpu_possible_map;
EXPORT_SYMBOL(cpu_possible_map);
cpumask_t cpu_online_map;
EXPORT_SYMBOL(cpu_online_map);
+
static atomic_t cpus_booted = ATOMIC_INIT(0);
-/* These are defined by the board-specific code. */
-
-/*
- * Cause the function described by call_data to be executed on the passed
- * cpu. When the function has finished, increment the finished field of
- * call_data.
- */
-void __smp_send_ipi(unsigned int cpu, unsigned int action);
-
-/*
- * Find the number of available processors
- */
-unsigned int __smp_probe_cpus(void);
-
-/*
- * Start a particular processor
- */
-void __smp_slave_init(unsigned int cpu);
-
/*
* Run specified function on a particular processor.
*/
@@ -73,74 +45,123 @@
static inline void __init smp_store_cpu_info(unsigned int cpu)
{
- cpu_data[cpu].loops_per_jiffy = loops_per_jiffy;
+ struct sh_cpuinfo *c = cpu_data + cpu;
+
+ c->loops_per_jiffy = loops_per_jiffy;
}
void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int cpu = smp_processor_id();
- int i;
- atomic_set(&cpus_booted, 1);
- smp_store_cpu_info(cpu);
-
- for (i = 0; i < __smp_probe_cpus(); i++)
- cpu_set(i, cpu_possible_map);
+ init_new_context(current, &init_mm);
+ current_thread_info()->cpu = cpu;
+ plat_prepare_cpus(max_cpus);
+
+#ifndef CONFIG_HOTPLUG_CPU
+ cpu_present_map = cpu_possible_map;
+#endif
}
void __devinit smp_prepare_boot_cpu(void)
{
unsigned int cpu = smp_processor_id();
+ __cpu_number_map[0] = cpu;
+ __cpu_logical_map[0] = cpu;
+
cpu_set(cpu, cpu_online_map);
cpu_set(cpu, cpu_possible_map);
}
-int __cpu_up(unsigned int cpu)
+asmlinkage void __cpuinit start_secondary(void)
{
- struct task_struct *tsk;
+ unsigned int cpu;
+ struct mm_struct *mm = &init_mm;
- tsk = fork_idle(cpu);
+ atomic_inc(&mm->mm_count);
+ atomic_inc(&mm->mm_users);
+ current->active_mm = mm;
+ BUG_ON(current->mm);
+ enter_lazy_tlb(mm, current);
- if (IS_ERR(tsk))
- panic("Failed forking idle task for cpu %d\n", cpu);
-
- task_thread_info(tsk)->cpu = cpu;
+ per_cpu_trap_init();
+
+ preempt_disable();
+
+ local_irq_enable();
+
+ calibrate_delay();
+
+ cpu = smp_processor_id();
+ smp_store_cpu_info(cpu);
cpu_set(cpu, cpu_online_map);
- return 0;
+ cpu_idle();
}
-int start_secondary(void *unused)
+extern struct {
+ unsigned long sp;
+ unsigned long bss_start;
+ unsigned long bss_end;
+ void *start_kernel_fn;
+ void *cpu_init_fn;
+ void *thread_info;
+} stack_start;
+
+int __cpuinit __cpu_up(unsigned int cpu)
{
- unsigned int cpu;
+ struct task_struct *tsk;
+ unsigned long timeout;
- cpu = smp_processor_id();
+ tsk = fork_idle(cpu);
+ if (IS_ERR(tsk)) {
+ printk(KERN_ERR "Failed forking idle task for cpu %d\n", cpu);
+ return PTR_ERR(tsk);
+ }
- atomic_inc(&init_mm.mm_count);
- current->active_mm = &init_mm;
+ /* Fill in data in head.S for secondary cpus */
+ stack_start.sp = tsk->thread.sp;
+ stack_start.thread_info = tsk->stack;
+ stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
+ stack_start.start_kernel_fn = start_secondary;
- smp_store_cpu_info(cpu);
+ flush_cache_all();
- __smp_slave_init(cpu);
- preempt_disable();
- per_cpu_trap_init();
-
- atomic_inc(&cpus_booted);
+ plat_start_cpu(cpu, (unsigned long)_stext);
- cpu_idle();
- return 0;
+ timeout = jiffies + HZ;
+ while (time_before(jiffies, timeout)) {
+ if (cpu_online(cpu))
+ break;
+
+ udelay(10);
+ }
+
+ if (cpu_online(cpu))
+ return 0;
+
+ return -ENOENT;
}
void __init smp_cpus_done(unsigned int max_cpus)
{
- smp_mb();
+ unsigned long bogosum = 0;
+ int cpu;
+
+ for_each_online_cpu(cpu)
+ bogosum += cpu_data[cpu].loops_per_jiffy;
+
+ printk(KERN_INFO "SMP: Total of %d processors activated "
+ "(%lu.%02lu BogoMIPS).\n", num_online_cpus(),
+ bogosum / (500000/HZ),
+ (bogosum / (5000/HZ)) % 100);
}
void smp_send_reschedule(int cpu)
{
- __smp_send_ipi(cpu, SMP_MSG_RESCHEDULE);
+ plat_send_ipi(cpu, SMP_MSG_RESCHEDULE);
}
static void stop_this_cpu(void *unused)
@@ -157,7 +178,6 @@
smp_call_function(stop_this_cpu, 0, 1, 0);
}
-
struct smp_fn_call_struct smp_fn_call = {
.lock = SPIN_LOCK_UNLOCKED,
.finished = ATOMIC_INIT(0),
@@ -175,9 +195,6 @@
unsigned int nr_cpus = atomic_read(&cpus_booted);
int i;
- if (nr_cpus < 2)
- return 0;
-
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
@@ -189,7 +206,7 @@
for (i = 0; i < nr_cpus; i++)
if (i != smp_processor_id())
- __smp_call_function(i);
+ plat_send_ipi(i, SMP_MSG_FUNCTION);
if (wait)
while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1));
@@ -205,3 +222,143 @@
return 0;
}
+static void flush_tlb_all_ipi(void *info)
+{
+ local_flush_tlb_all();
+}
+
+void flush_tlb_all(void)
+{
+ on_each_cpu(flush_tlb_all_ipi, 0, 1, 1);
+}
+
+static void flush_tlb_mm_ipi(void *mm)
+{
+ local_flush_tlb_mm((struct mm_struct *)mm);
+}
+
+/*
+ * The following tlb flush calls are invoked when old translations are
+ * being torn down, or pte attributes are changing. For single threaded
+ * address spaces, a new context is obtained on the current cpu, and tlb
+ * context on other cpus are invalidated to force a new context allocation
+ * at switch_mm time, should the mm ever be used on other cpus. For
+ * multithreaded address spaces, intercpu interrupts have to be sent.
+ * Another case where intercpu interrupts are required is when the target
+ * mm might be active on another cpu (eg debuggers doing the flushes on
+ * behalf of debugees, kswapd stealing pages from another process etc).
+ * Kanoj 07/00.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ preempt_disable();
+
+ if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
+ smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1);
+ } else {
+ int i;
+ for (i = 0; i < num_online_cpus(); i++)
+ if (smp_processor_id() != i)
+ cpu_context(i, mm) = 0;
+ }
+ local_flush_tlb_mm(mm);
+
+ preempt_enable();
+}
+
+struct flush_tlb_data {
+ struct vm_area_struct *vma;
+ unsigned long addr1;
+ unsigned long addr2;
+};
+
+static void flush_tlb_range_ipi(void *info)
+{
+ struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+ local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+
+ preempt_disable();
+ if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
+ struct flush_tlb_data fd;
+
+ fd.vma = vma;
+ fd.addr1 = start;
+ fd.addr2 = end;
+ smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1);
+ } else {
+ int i;
+ for (i = 0; i < num_online_cpus(); i++)
+ if (smp_processor_id() != i)
+ cpu_context(i, mm) = 0;
+ }
+ local_flush_tlb_range(vma, start, end);
+ preempt_enable();
+}
+
+static void flush_tlb_kernel_range_ipi(void *info)
+{
+ struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+ local_flush_tlb_kernel_range(fd->addr1, fd->addr2);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ struct flush_tlb_data fd;
+
+ fd.addr1 = start;
+ fd.addr2 = end;
+ on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1, 1);
+}
+
+static void flush_tlb_page_ipi(void *info)
+{
+ struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+
+ local_flush_tlb_page(fd->vma, fd->addr1);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+ preempt_disable();
+ if ((atomic_read(&vma->vm_mm->mm_users) != 1) ||
+ (current->mm != vma->vm_mm)) {
+ struct flush_tlb_data fd;
+
+ fd.vma = vma;
+ fd.addr1 = page;
+ smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1);
+ } else {
+ int i;
+ for (i = 0; i < num_online_cpus(); i++)
+ if (smp_processor_id() != i)
+ cpu_context(i, vma->vm_mm) = 0;
+ }
+ local_flush_tlb_page(vma, page);
+ preempt_enable();
+}
+
+static void flush_tlb_one_ipi(void *info)
+{
+ struct flush_tlb_data *fd = (struct flush_tlb_data *)info;
+ local_flush_tlb_one(fd->addr1, fd->addr2);
+}
+
+void flush_tlb_one(unsigned long asid, unsigned long vaddr)
+{
+ struct flush_tlb_data fd;
+
+ fd.addr1 = asid;
+ fd.addr2 = vaddr;
+
+ smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1, 1);
+ local_flush_tlb_one(asid, vaddr);
+}
diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S
index 91fb702..10bec45 100644
--- a/arch/sh/kernel/syscalls.S
+++ b/arch/sh/kernel/syscalls.S
@@ -14,24 +14,6 @@
#include <linux/sys.h>
#include <linux/linkage.h>
-#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
-#define sys_nfsservctl sys_ni_syscall
-#endif
-
-#if !defined(CONFIG_MMU)
-#define sys_madvise sys_ni_syscall
-#define sys_readahead sys_ni_syscall
-#define sys_mprotect sys_ni_syscall
-#define sys_msync sys_ni_syscall
-#define sys_mlock sys_ni_syscall
-#define sys_munlock sys_ni_syscall
-#define sys_mlockall sys_ni_syscall
-#define sys_munlockall sys_ni_syscall
-#define sys_mremap sys_ni_syscall
-#define sys_mincore sys_ni_syscall
-#define sys_remap_file_pages sys_ni_syscall
-#endif
-
.data
ENTRY(sys_call_table)
.long sys_restart_syscall /* 0 - old "setup()" system call*/
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8a545d5..628ec9a 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -173,7 +173,8 @@
tmu_timer_stop();
-#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785) && \
!defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 6701504..dcb46e7 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -807,12 +807,13 @@
}
#endif
-void __init per_cpu_trap_init(void)
+void __cpuinit per_cpu_trap_init(void)
{
extern void *vbr_base;
#ifdef CONFIG_SH_STANDARD_BIOS
- gdb_vbr_init();
+ if (raw_smp_processor_id() == 0)
+ gdb_vbr_init();
#endif
/* NOTE: The VBR value should be at P1
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 9cb95af..6d5abba 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -62,6 +62,8 @@
__nosave_end = .;
PERCPU(PAGE_SIZE)
+
+ . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
_edata = .; /* End of data section */
@@ -89,7 +91,14 @@
__con_initcall_end = .;
SECURITY_INIT
+ /* .exit.text is discarded at runtime, not link time, to deal with
+ references from .rodata */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
@@ -107,6 +116,7 @@
*(.bss.page_aligned)
*(.bss)
. = ALIGN(4);
+ _ebss = .; /* uClinux MTD sucks */
_end = . ;
}
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 43f3972..cf446bb 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -2,7 +2,6 @@
# Processor families
#
config CPU_SH2
- select SH_WRITETHROUGH if !CPU_SH2A
bool
config CPU_SH2A
@@ -19,6 +18,7 @@
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2
+ select CPU_HAS_FPU if !CPU_SH4AL_DSP
config CPU_SH4A
bool
@@ -32,7 +32,6 @@
config CPU_SUBTYPE_ST40
bool
select CPU_SH4
- select CPU_HAS_INTC2_IRQ
config CPU_SHX2
bool
@@ -52,26 +51,22 @@
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
- select CPU_HAS_IPR_IRQ
# SH-2A Processor Support
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
- select CPU_HAS_IPR_IRQ
# SH-3 Processor Support
config CPU_SUBTYPE_SH7705
bool "Support SH7705 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
config CPU_SUBTYPE_SH7706
bool "Support SH7706 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
help
Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
@@ -91,14 +86,12 @@
config CPU_SUBTYPE_SH7709
bool "Support SH7709 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
help
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
config CPU_SUBTYPE_SH7710
bool "Support SH7710 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
select CPU_HAS_DSP
help
Select SH7710 if you have a SH3-DSP SH7710 CPU.
@@ -106,24 +99,28 @@
config CPU_SUBTYPE_SH7712
bool "Support SH7712 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
select CPU_HAS_DSP
help
Select SH7712 if you have a SH3-DSP SH7712 CPU.
+config CPU_SUBTYPE_SH7720
+ bool "Support SH7720 processor"
+ select CPU_SH3
+ select CPU_HAS_DSP
+ help
+ Select SH7720 if you have a SH3-DSP SH7720 CPU.
+
# SH-4 Processor Support
config CPU_SUBTYPE_SH7750
bool "Support SH7750 processor"
select CPU_SH4
- select CPU_HAS_INTC_IRQ
help
Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
config CPU_SUBTYPE_SH7091
bool "Support SH7091 processor"
select CPU_SH4
- select CPU_HAS_INTC_IRQ
help
Select SH7091 if you have an SH-4 based Sega device (such as
the Dreamcast, Naomi, and Naomi 2).
@@ -131,17 +128,14 @@
config CPU_SUBTYPE_SH7750R
bool "Support SH7750R processor"
select CPU_SH4
- select CPU_HAS_INTC_IRQ
config CPU_SUBTYPE_SH7750S
bool "Support SH7750S processor"
select CPU_SH4
- select CPU_HAS_INTC_IRQ
config CPU_SUBTYPE_SH7751
bool "Support SH7751 processor"
select CPU_SH4
- select CPU_HAS_INTC_IRQ
help
Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
or if you have a HD6417751R CPU.
@@ -149,13 +143,10 @@
config CPU_SUBTYPE_SH7751R
bool "Support SH7751R processor"
select CPU_SH4
- select CPU_HAS_INTC_IRQ
config CPU_SUBTYPE_SH7760
bool "Support SH7760 processor"
select CPU_SH4
- select CPU_HAS_INTC2_IRQ
- select CPU_HAS_IPR_IRQ
config CPU_SUBTYPE_SH4_202
bool "Support SH4-202 processor"
@@ -185,19 +176,21 @@
config CPU_SUBTYPE_SH7780
bool "Support SH7780 processor"
select CPU_SH4A
- select CPU_HAS_INTC_IRQ
config CPU_SUBTYPE_SH7785
bool "Support SH7785 processor"
select CPU_SH4A
select CPU_SHX2
- select CPU_HAS_INTC2_IRQ
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
select CPU_SH4A
select CPU_SHX3
- select CPU_HAS_INTC2_IRQ
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_SMP
# SH4AL-DSP Processor Support
@@ -209,7 +202,6 @@
bool "Support SH7722 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
- select CPU_HAS_INTC_IRQ
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
@@ -274,7 +266,7 @@
config X2TLB
bool "Enable extended TLB mode"
- depends on CPU_SHX2 && MMU && EXPERIMENTAL
+ depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL
help
Selecting this option will enable the extended mode of the SH-X2
TLB. For legacy SH-X behaviour and interoperability, say N. For
@@ -307,6 +299,7 @@
config NODES_SHIFT
int
+ default "3" if CPU_SUBTYPE_SHX3
default "1"
depends on NEED_MULTIPLE_NODES
@@ -323,7 +316,9 @@
config MAX_ACTIVE_REGIONS
int
- default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM)
+ default "6" if (CPU_SUBTYPE_SHX3 && SPARSEMEM)
+ default "2" if SPARSEMEM && (CPU_SUBTYPE_SH7722 || \
+ CPU_SUBTYPE_SH7785)
default "1"
config ARCH_POPULATES_NODE_MAP
@@ -342,25 +337,27 @@
choice
prompt "Kernel page size"
+ default PAGE_SIZE_8KB if X2TLB
default PAGE_SIZE_4KB
config PAGE_SIZE_4KB
bool "4kB"
+ depends on !X2TLB
help
This is the default page size used by all SuperH CPUs.
config PAGE_SIZE_8KB
bool "8kB"
- depends on EXPERIMENTAL && X2TLB
+ depends on X2TLB
help
This enables 8kB pages as supported by SH-X2 and later MMUs.
config PAGE_SIZE_64KB
bool "64kB"
- depends on EXPERIMENTAL && CPU_SH4
+ depends on CPU_SH4
help
This enables support for 64kB pages, possible on all SH-4
- CPUs and later. Highly experimental, not recommended.
+ CPUs and later.
endchoice
@@ -412,8 +409,17 @@
Turn this option off for platforms that do not have a direct-mapped
cache, and you have no need to run the caches in such a configuration.
-config SH_WRITETHROUGH
- bool "Use write-through caching"
+choice
+ prompt "Cache mode"
+ default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
+ default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
+
+config CACHE_WRITEBACK
+ bool "Write-back"
+ depends on CPU_SH2A || CPU_SH3 || CPU_SH4
+
+config CACHE_WRITETHROUGH
+ bool "Write-through"
help
Selecting this option will configure the caches in write-through
mode, as opposed to the default write-back configuration.
@@ -424,4 +430,9 @@
If unsure, say N.
+config CACHE_OFF
+ bool "Off"
+
+endchoice
+
endmenu
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 4061e89..ee30fb4 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -4,29 +4,32 @@
obj-y := init.o extable.o consistent.o
-obj-$(CONFIG_CPU_SH2) += cache-sh2.o
-obj-$(CONFIG_CPU_SH3) += cache-sh3.o
-obj-$(CONFIG_CPU_SH4) += cache-sh4.o
+ifndef CONFIG_CACHE_OFF
+obj-$(CONFIG_CPU_SH2) += cache-sh2.o
+obj-$(CONFIG_CPU_SH3) += cache-sh3.o
+obj-$(CONFIG_CPU_SH4) += cache-sh4.o
+obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
+endif
mmu-y := tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_CPU_SH3) += fault-nommu.o
-mmu-$(CONFIG_CPU_SH4) += fault-nommu.o
mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \
ioremap.o
obj-y += $(mmu-y)
ifdef CONFIG_DEBUG_FS
-obj-$(CONFIG_CPU_SH4) += cache-debugfs.o
+obj-$(CONFIG_CPU_SH4) += cache-debugfs.o
endif
ifdef CONFIG_MMU
-obj-$(CONFIG_CPU_SH3) += tlb-sh3.o
-obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
+obj-$(CONFIG_CPU_SH3) += tlb-sh3.o
+obj-$(CONFIG_CPU_SH4) += tlb-sh4.o
+ifndef CONFIG_CACHE_OFF
+obj-$(CONFIG_CPU_SH4) += pg-sh4.o
+obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
+endif
endif
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
obj-$(CONFIG_32BIT) += pmb.o
obj-$(CONFIG_NUMA) += numa.o
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 8648632..226b190 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -2,7 +2,7 @@
* arch/sh/mm/cache-sh4.c
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2001 - 2006 Paul Mundt
+ * Copyright (C) 2001 - 2007 Paul Mundt
* Copyright (C) 2003 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -44,7 +44,7 @@
static void compute_alias(struct cache_info *c)
{
c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
- c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1;
+ c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
}
static void __init emit_cache_params(void)
@@ -54,21 +54,35 @@
ctrl_inl(CCN_CVR),
ctrl_inl(CCN_PRR));
printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- current_cpu_data.icache.ways,
- current_cpu_data.icache.sets,
- current_cpu_data.icache.way_incr);
+ boot_cpu_data.icache.ways,
+ boot_cpu_data.icache.sets,
+ boot_cpu_data.icache.way_incr);
printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- current_cpu_data.icache.entry_mask,
- current_cpu_data.icache.alias_mask,
- current_cpu_data.icache.n_aliases);
+ boot_cpu_data.icache.entry_mask,
+ boot_cpu_data.icache.alias_mask,
+ boot_cpu_data.icache.n_aliases);
printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
- current_cpu_data.dcache.ways,
- current_cpu_data.dcache.sets,
- current_cpu_data.dcache.way_incr);
+ boot_cpu_data.dcache.ways,
+ boot_cpu_data.dcache.sets,
+ boot_cpu_data.dcache.way_incr);
printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
- current_cpu_data.dcache.entry_mask,
- current_cpu_data.dcache.alias_mask,
- current_cpu_data.dcache.n_aliases);
+ boot_cpu_data.dcache.entry_mask,
+ boot_cpu_data.dcache.alias_mask,
+ boot_cpu_data.dcache.n_aliases);
+
+ /*
+ * Emit Secondary Cache parameters if the CPU has a probed L2.
+ */
+ if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+ printk("S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+ boot_cpu_data.scache.ways,
+ boot_cpu_data.scache.sets,
+ boot_cpu_data.scache.way_incr);
+ printk("S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+ boot_cpu_data.scache.entry_mask,
+ boot_cpu_data.scache.alias_mask,
+ boot_cpu_data.scache.n_aliases);
+ }
if (!__flush_dcache_segment_fn)
panic("unknown number of cache ways\n");
@@ -79,10 +93,11 @@
*/
void __init p3_cache_init(void)
{
- compute_alias(¤t_cpu_data.icache);
- compute_alias(¤t_cpu_data.dcache);
+ compute_alias(&boot_cpu_data.icache);
+ compute_alias(&boot_cpu_data.dcache);
+ compute_alias(&boot_cpu_data.scache);
- switch (current_cpu_data.dcache.ways) {
+ switch (boot_cpu_data.dcache.ways) {
case 1:
__flush_dcache_segment_fn = __flush_dcache_segment_1way;
break;
@@ -187,13 +202,13 @@
: "m" (__m(v)));
index = CACHE_IC_ADDRESS_ARRAY |
- (v & current_cpu_data.icache.entry_mask);
+ (v & boot_cpu_data.icache.entry_mask);
local_irq_save(flags);
jump_to_P2();
- for (i = 0; i < current_cpu_data.icache.ways;
- i++, index += current_cpu_data.icache.way_incr)
+ for (i = 0; i < boot_cpu_data.icache.ways;
+ i++, index += boot_cpu_data.icache.way_incr)
ctrl_outl(0, index); /* Clear out Valid-bit */
back_to_P1();
@@ -210,7 +225,7 @@
* All types of SH-4 require PC to be in P2 to operate on the I-cache.
* Some types of SH-4 require PC to be in P2 to operate on the D-cache.
*/
- if ((current_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
+ if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
(start < CACHE_OC_ADDRESS_ARRAY))
exec_offset = 0x20000000;
@@ -232,7 +247,7 @@
int i, n;
/* Loop all the D-cache */
- n = current_cpu_data.dcache.n_aliases;
+ n = boot_cpu_data.dcache.n_aliases;
for (i = 0; i < n; i++, addr += 4096)
flush_cache_4096(addr, phys);
}
@@ -264,7 +279,7 @@
void flush_dcache_all(void)
{
- (*__flush_dcache_segment_fn)(0UL, current_cpu_data.dcache.way_size);
+ (*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size);
wmb();
}
@@ -278,8 +293,8 @@
unsigned long end)
{
unsigned long d = 0, p = start & PAGE_MASK;
- unsigned long alias_mask = current_cpu_data.dcache.alias_mask;
- unsigned long n_aliases = current_cpu_data.dcache.n_aliases;
+ unsigned long alias_mask = boot_cpu_data.dcache.alias_mask;
+ unsigned long n_aliases = boot_cpu_data.dcache.n_aliases;
unsigned long select_bit;
unsigned long all_aliases_mask;
unsigned long addr_offset;
@@ -366,7 +381,7 @@
* If cache is only 4k-per-way, there are never any 'aliases'. Since
* the cache is physically tagged, the data can just be left in there.
*/
- if (current_cpu_data.dcache.n_aliases == 0)
+ if (boot_cpu_data.dcache.n_aliases == 0)
return;
/*
@@ -403,7 +418,7 @@
unsigned long phys = pfn << PAGE_SHIFT;
unsigned int alias_mask;
- alias_mask = current_cpu_data.dcache.alias_mask;
+ alias_mask = boot_cpu_data.dcache.alias_mask;
/* We only need to flush D-cache when we have alias */
if ((address^phys) & alias_mask) {
@@ -417,7 +432,7 @@
phys);
}
- alias_mask = current_cpu_data.icache.alias_mask;
+ alias_mask = boot_cpu_data.icache.alias_mask;
if (vma->vm_flags & VM_EXEC) {
/*
* Evict entries from the portion of the cache from which code
@@ -449,7 +464,7 @@
* If cache is only 4k-per-way, there are never any 'aliases'. Since
* the cache is physically tagged, the data can just be left in there.
*/
- if (current_cpu_data.dcache.n_aliases == 0)
+ if (boot_cpu_data.dcache.n_aliases == 0)
return;
/*
@@ -510,7 +525,7 @@
unsigned long a, ea, p;
unsigned long temp_pc;
- dcache = ¤t_cpu_data.dcache;
+ dcache = &boot_cpu_data.dcache;
/* Write this way for better assembly. */
way_count = dcache->ways;
way_incr = dcache->way_incr;
@@ -585,7 +600,7 @@
base_addr = ((base_addr >> 16) << 16);
base_addr |= start;
- dcache = ¤t_cpu_data.dcache;
+ dcache = &boot_cpu_data.dcache;
linesz = dcache->linesz;
way_incr = dcache->way_incr;
way_size = dcache->way_size;
@@ -627,7 +642,7 @@
base_addr = ((base_addr >> 16) << 16);
base_addr |= start;
- dcache = ¤t_cpu_data.dcache;
+ dcache = &boot_cpu_data.dcache;
linesz = dcache->linesz;
way_incr = dcache->way_incr;
way_size = dcache->way_size;
@@ -686,7 +701,7 @@
base_addr = ((base_addr >> 16) << 16);
base_addr |= start;
- dcache = ¤t_cpu_data.dcache;
+ dcache = &boot_cpu_data.dcache;
linesz = dcache->linesz;
way_incr = dcache->way_incr;
way_size = dcache->way_size;
diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S
index ae039f2..a81dbdb 100644
--- a/arch/sh/mm/copy_page.S
+++ b/arch/sh/mm/copy_page.S
@@ -141,47 +141,38 @@
.long 9999b, 6000f ; \
.previous
ENTRY(__copy_user)
- tst r6,r6 ! Check explicitly for zero
- bf 1f
- rts
- mov #0,r0 ! normal return
-1:
- mov.l r10,@-r15
- mov.l r9,@-r15
- mov.l r8,@-r15
+ ! Check if small number of bytes
+ mov #11,r0
mov r4,r3
- add r6,r3 ! last destination address
- mov #12,r0 ! Check if small number of bytes
- cmp/gt r0,r6
- bt 2f
- bra .L_cleanup_loop
- nop
-2:
- neg r5,r0 ! Calculate bytes needed to align source
- add #4,r0
- and #3,r0
- tst r0,r0
- bt .L_jump
- mov r0,r1
+ cmp/gt r0,r6 ! r6 (len) > r0 (11)
+ bf/s .L_cleanup_loop_no_pop
+ add r6,r3 ! last destination address
-.L_loop1:
- ! Copy bytes to align source
-EX( mov.b @r5+,r0 )
- dt r1
-EX( mov.b r0,@r4 )
+ ! Calculate bytes needed to align to src
+ mov.l r11,@-r15
+ neg r5,r0
+ mov.l r10,@-r15
+ add #4,r0
+ mov.l r9,@-r15
+ and #3,r0
+ mov.l r8,@-r15
+ tst r0,r0
+ bt 2f
+
+1:
+ ! Copy bytes to long word align src
+EX( mov.b @r5+,r1 )
+ dt r0
add #-1,r6
- bf/s .L_loop1
+EX( mov.b r1,@r4 )
+ bf/s 1b
add #1,r4
-.L_jump:
- mov r6,r2 ! Calculate number of longwords to copy
+ ! Jump to appropriate routine depending on dest
+2: mov #3,r1
+ mov r6, r2
+ and r4,r1
shlr2 r2
- tst r2,r2
- bt .L_cleanup
-
- mov r4,r0 ! Jump to appropriate routine
- and #3,r0
- mov r0,r1
shll2 r1
mova .L_jump_tbl,r0
mov.l @(r0,r1),r1
@@ -195,43 +186,97 @@
.long .L_dest10
.long .L_dest11
+/*
+ * Come here if there are less than 12 bytes to copy
+ *
+ * Keep the branch target close, so the bf/s callee doesn't overflow
+ * and result in a more expensive branch being inserted. This is the
+ * fast-path for small copies, the jump via the jump table will hit the
+ * default slow-path cleanup. -PFM.
+ */
+.L_cleanup_loop_no_pop:
+ tst r6,r6 ! Check explicitly for zero
+ bt 1f
+
+2:
+EX( mov.b @r5+,r0 )
+ dt r6
+EX( mov.b r0,@r4 )
+ bf/s 2b
+ add #1,r4
+
+1: mov #0,r0 ! normal return
+5000:
+
+# Exception handler:
+.section .fixup, "ax"
+6000:
+ mov.l 8000f,r1
+ mov r3,r0
+ jmp @r1
+ sub r4,r0
+ .align 2
+8000: .long 5000b
+
+.previous
+ rts
+ nop
+
! Destination = 00
.L_dest00:
- mov r2,r7
- shlr2 r7
- shlr r7
- tst r7,r7
- mov #7,r0
- bt/s 1f
- and r0,r2
- .align 2
+ ! Skip the large copy for small transfers
+ mov #(32+32-4), r0
+ cmp/gt r6, r0 ! r0 (60) > r6 (len)
+ bt 1f
+
+ ! Align dest to a 32 byte boundary
+ neg r4,r0
+ add #0x20, r0
+ and #0x1f, r0
+ tst r0, r0
+ bt 2f
+
+ sub r0, r6
+ shlr2 r0
+3:
+EX( mov.l @r5+,r1 )
+ dt r0
+EX( mov.l r1,@r4 )
+ bf/s 3b
+ add #4,r4
+
2:
EX( mov.l @r5+,r0 )
+EX( mov.l @r5+,r1 )
+EX( mov.l @r5+,r2 )
+EX( mov.l @r5+,r7 )
EX( mov.l @r5+,r8 )
EX( mov.l @r5+,r9 )
EX( mov.l @r5+,r10 )
-EX( mov.l r0,@r4 )
-EX( mov.l r8,@(4,r4) )
-EX( mov.l r9,@(8,r4) )
-EX( mov.l r10,@(12,r4) )
-EX( mov.l @r5+,r0 )
-EX( mov.l @r5+,r8 )
-EX( mov.l @r5+,r9 )
-EX( mov.l @r5+,r10 )
- dt r7
-EX( mov.l r0,@(16,r4) )
-EX( mov.l r8,@(20,r4) )
-EX( mov.l r9,@(24,r4) )
-EX( mov.l r10,@(28,r4) )
+EX( mov.l @r5+,r11 )
+EX( movca.l r0,@r4 )
+ add #-32, r6
+EX( mov.l r1,@(4,r4) )
+ mov #32, r0
+EX( mov.l r2,@(8,r4) )
+ cmp/gt r6, r0 ! r0 (32) > r6 (len)
+EX( mov.l r7,@(12,r4) )
+EX( mov.l r8,@(16,r4) )
+EX( mov.l r9,@(20,r4) )
+EX( mov.l r10,@(24,r4) )
+EX( mov.l r11,@(28,r4) )
bf/s 2b
add #32,r4
- tst r2,r2
+
+1: mov r6, r0
+ shlr2 r0
+ tst r0, r0
bt .L_cleanup
1:
-EX( mov.l @r5+,r0 )
- dt r2
-EX( mov.l r0,@r4 )
+EX( mov.l @r5+,r1 )
+ dt r0
+EX( mov.l r1,@r4 )
bf/s 1b
add #4,r4
@@ -250,7 +295,7 @@
and r0,r2
2:
dt r7
-#ifdef __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
EX( mov.l @r5+,r0 )
EX( mov.l @r5+,r1 )
EX( mov.l @r5+,r8 )
@@ -320,7 +365,7 @@
1: ! Read longword, write two words per iteration
EX( mov.l @r5+,r0 )
dt r2
-#ifdef __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
EX( mov.w r0,@r4 )
shlr16 r0
EX( mov.w r0,@(2,r4) )
@@ -342,7 +387,7 @@
! Read longword, write byte, word, byte per iteration
EX( mov.l @r5+,r0 )
dt r2
-#ifdef __LITTLE_ENDIAN__
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
EX( mov.b r0,@r4 )
shlr8 r0
add #1,r4
@@ -379,6 +424,7 @@
.L_exit:
mov #0,r0 ! normal return
+
5000:
# Exception handler:
@@ -394,5 +440,6 @@
.previous
mov.l @r15+,r8
mov.l @r15+,r9
+ mov.l @r15+,r10
rts
- mov.l @r15+,r10
+ mov.l @r15+,r11
diff --git a/arch/sh/mm/fault-nommu.c b/arch/sh/mm/fault-nommu.c
deleted file mode 100644
index c6f5b51..0000000
--- a/arch/sh/mm/fault-nommu.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/sh/mm/fault-nommu.c
- *
- * Copyright (C) 2002 - 2007 Paul Mundt
- *
- * Based on linux/arch/sh/mm/fault.c:
- * Copyright (C) 1999 Niibe Yutaka
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/hardirq.h>
-#include <linux/kprobes.h>
-#include <asm/system.h>
-#include <asm/ptrace.h>
-#include <asm/kgdb.h>
-
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address)
-{
- trace_hardirqs_on();
- local_irq_enable();
-
-#if defined(CONFIG_SH_KGDB)
- if (kgdb_nofault && kgdb_bus_err_hook)
- kgdb_bus_err_hook();
-#endif
-
- /*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- *
- */
- if (address < PAGE_SIZE) {
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
- } else {
- printk(KERN_ALERT "Unable to handle kernel paging request");
- }
-
- printk(" at virtual address %08lx\n", address);
- printk(KERN_ALERT "pc = %08lx\n", regs->pc);
-
- die("Oops", regs, writeaccess);
- do_exit(SIGKILL);
-}
-
-asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
- unsigned long writeaccess,
- unsigned long address)
-{
-#if defined(CONFIG_SH_KGDB)
- if (kgdb_nofault && kgdb_bus_err_hook)
- kgdb_bus_err_hook();
-#endif
-
- return (address >= TASK_SIZE);
-}
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index a08a4a9..7d43758 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -145,7 +145,7 @@
ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
-#ifdef CONFIG_SH_WRITETHROUGH
+#ifdef CONFIG_CACHE_WRITETHROUGH
/*
* When we are in 32-bit address extended mode, CCR.CB becomes
* invalid, so care must be taken to manually adjust cacheable
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index f74cf66..2d1dd60 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -4,27 +4,14 @@
* SH-4 specific TLB operations
*
* Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*
* Released under the terms of the GNU GPL v2.0.
*/
-#include <linux/signal.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
@@ -34,22 +21,27 @@
unsigned long flags;
unsigned long pteval;
unsigned long vpn;
- struct page *page;
- unsigned long pfn;
/* Ptrace may call this routine. */
if (vma && current->active_mm != vma->vm_mm)
return;
- pfn = pte_pfn(pte);
- if (pfn_valid(pfn)) {
- page = pfn_to_page(pfn);
- if (!test_bit(PG_mapped, &page->flags)) {
- unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
- __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE);
- __set_bit(PG_mapped, &page->flags);
+#ifndef CONFIG_CACHE_OFF
+ {
+ unsigned long pfn = pte_pfn(pte);
+
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ if (!test_bit(PG_mapped, &page->flags)) {
+ unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+ __flush_wback_region((void *)P1SEGADDR(phys),
+ PAGE_SIZE);
+ __set_bit(PG_mapped, &page->flags);
+ }
}
}
+#endif
local_irq_save(flags);
@@ -57,16 +49,26 @@
vpn = (address & MMU_VPN_MASK) | get_asid();
ctrl_outl(vpn, MMU_PTEH);
- pteval = pte_val(pte);
+ pteval = pte.pte_low;
/* Set PTEA register */
+#ifdef CONFIG_X2TLB
+ /*
+ * For the extended mode TLB this is trivial, only the ESZ and
+ * EPR bits need to be written out to PTEA, with the remainder of
+ * the protection bits (with the exception of the compat-mode SZ
+ * and PR bits, which are cleared) being written out in PTEL.
+ */
+ ctrl_outl(pte.pte_high, MMU_PTEA);
+#else
if (cpu_data->flags & CPU_HAS_PTEA)
/* TODO: make this look less hacky */
ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
+#endif
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_SH_WRITETHROUGH
+#ifdef CONFIG_CACHE_WRITETHROUGH
pteval |= _PAGE_WT;
#endif
/* conveniently, we want all the software flags to be 0 anyway */
@@ -93,4 +95,3 @@
ctrl_outl(data, addr);
back_to_P1();
}
-
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 93ee05e..78277a1 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -1,7 +1,7 @@
/*
* SuperH On-Chip RTC Support
*
- * Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006, 2007 Paul Mundt
* Copyright (C) 2006 Jamie Lenehan
*
* Based on the old arch/sh/kernel/cpu/rtc.c by:
@@ -23,16 +23,19 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <asm/rtc.h>
#define DRV_NAME "sh-rtc"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "0.1.3"
#ifdef CONFIG_CPU_SH3
#define rtc_reg_size sizeof(u16)
#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */
+#define RTC_DEF_CAPABILITIES 0UL
#elif defined(CONFIG_CPU_SH4)
#define rtc_reg_size sizeof(u32)
#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
+#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
#endif
#define RTC_REG(r) ((r) * rtc_reg_size)
@@ -80,6 +83,7 @@
struct rtc_device *rtc_dev;
spinlock_t lock;
int rearm_aie;
+ unsigned long capabilities; /* See asm-sh/rtc.h for cap bits */
};
static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
@@ -319,14 +323,14 @@
tm->tm_mday = BCD2BIN(readb(rtc->regbase + RDAYCNT));
tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT)) - 1;
-#if defined(CONFIG_CPU_SH4)
- yr = readw(rtc->regbase + RYRCNT);
- yr100 = BCD2BIN(yr >> 8);
- yr &= 0xff;
-#else
- yr = readb(rtc->regbase + RYRCNT);
- yr100 = BCD2BIN((yr == 0x99) ? 0x19 : 0x20);
-#endif
+ if (rtc->capabilities & RTC_CAP_4_DIGIT_YEAR) {
+ yr = readw(rtc->regbase + RYRCNT);
+ yr100 = BCD2BIN(yr >> 8);
+ yr &= 0xff;
+ } else {
+ yr = readb(rtc->regbase + RYRCNT);
+ yr100 = BCD2BIN((yr == 0x99) ? 0x19 : 0x20);
+ }
tm->tm_year = (yr100 * 100 + BCD2BIN(yr)) - 1900;
@@ -375,14 +379,14 @@
writeb(BIN2BCD(tm->tm_mday), rtc->regbase + RDAYCNT);
writeb(BIN2BCD(tm->tm_mon + 1), rtc->regbase + RMONCNT);
-#ifdef CONFIG_CPU_SH3
- year = tm->tm_year % 100;
- writeb(BIN2BCD(year), rtc->regbase + RYRCNT);
-#else
- year = (BIN2BCD((tm->tm_year + 1900) / 100) << 8) |
- BIN2BCD(tm->tm_year % 100);
- writew(year, rtc->regbase + RYRCNT);
-#endif
+ if (rtc->capabilities & RTC_CAP_4_DIGIT_YEAR) {
+ year = (BIN2BCD((tm->tm_year + 1900) / 100) << 8) |
+ BIN2BCD(tm->tm_year % 100);
+ writew(year, rtc->regbase + RYRCNT);
+ } else {
+ year = tm->tm_year % 100;
+ writeb(BIN2BCD(year), rtc->regbase + RYRCNT);
+ }
/* Start RTC */
tmp = readb(rtc->regbase + RCR2);
@@ -589,6 +593,17 @@
goto err_badmap;
}
+ rtc->capabilities = RTC_DEF_CAPABILITIES;
+ if (pdev->dev.platform_data) {
+ struct sh_rtc_platform_info *pinfo = pdev->dev.platform_data;
+
+ /*
+ * Some CPUs have special capabilities in addition to the
+ * default set. Add those in here.
+ */
+ rtc->capabilities |= pinfo->capabilities;
+ }
+
platform_set_drvdata(pdev, rtc);
return 0;
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 053fca4..73440e2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -4,6 +4,7 @@
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
* Copyright (C) 2002 - 2006 Paul Mundt
+ * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
*
@@ -301,6 +302,38 @@
}
sci_out(port, SCFCR, fcr_val);
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+ unsigned short data;
+
+ if (cflag & CRTSCTS) {
+ /* enable RTS/CTS */
+ if (port->mapbase == 0xa4430000) { /* SCIF0 */
+ /* Clear PTCR bit 9-2; enable all scif pins but sck */
+ data = ctrl_inw(PORT_PTCR);
+ ctrl_outw((data & 0xfc03), PORT_PTCR);
+ } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+ /* Clear PVCR bit 9-2 */
+ data = ctrl_inw(PORT_PVCR);
+ ctrl_outw((data & 0xfc03), PORT_PVCR);
+ }
+ fcr_val |= SCFCR_MCE;
+ } else {
+ if (port->mapbase == 0xa4430000) { /* SCIF0 */
+ /* Clear PTCR bit 5-2; enable only tx and rx */
+ data = ctrl_inw(PORT_PTCR);
+ ctrl_outw((data & 0xffc3), PORT_PTCR);
+ } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+ /* Clear PVCR bit 5-2 */
+ data = ctrl_inw(PORT_PVCR);
+ ctrl_outw((data & 0xffc3), PORT_PVCR);
+ }
+ }
+ sci_out(port, SCFCR, fcr_val);
+}
+
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
@@ -1276,7 +1309,7 @@
console_initcall(sci_console_init);
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-#ifdef CONFIG_SH_KGDB
+#ifdef CONFIG_SH_KGDB_CONSOLE
/*
* FIXME: Most of this can go away.. at the moment, we rely on
* arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
@@ -1334,9 +1367,7 @@
return uart_set_options(port, co, baud, parity, bits, flow);
}
-#endif /* CONFIG_SH_KGDB */
-#ifdef CONFIG_SH_KGDB_CONSOLE
static struct console kgdb_console = {
.name = "ttySC",
.device = uart_console_device,
@@ -1432,7 +1463,7 @@
#ifdef CONFIG_CPU_FREQ
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
- dev_info(&dev->dev, "sci: CPU frequency notifier registered\n");
+ dev_info(&dev->dev, "CPU frequency notifier registered\n");
#endif
#ifdef CONFIG_SH_STANDARD_BIOS
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index cf75466..e89ae29 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -10,19 +10,19 @@
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
* Removed SH7300 support (Jul 2007).
+ * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
*/
#include <linux/serial_core.h>
#include <asm/io.h>
-#if defined(__H8300H__) || defined(__H8300S__)
#include <asm/gpio.h>
+
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
#include <asm/regs306x.h>
#endif
#if defined(CONFIG_H8S2678)
#include <asm/regs267x.h>
#endif
-#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
@@ -46,6 +46,10 @@
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#define SCIF_ORER 0x0200 /* overrun error bit */
#elif defined(CONFIG_SH_RTS7751R2D)
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -217,7 +221,8 @@
#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SCIF_ORER 0x0200
#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
#define SCIF_RFDC_MASK 0x007f
@@ -254,7 +259,8 @@
# define SCxSR_FER(port) SCIF_FER
# define SCxSR_PER(port) SCIF_PER
# define SCxSR_BRK(port) SCIF_BRK
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
@@ -362,7 +368,8 @@
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -388,7 +395,8 @@
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -510,7 +518,15 @@
return;
}
}
-
+#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xa4430000)
+ return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
+ else if (port->mapbase == 0xa4438000)
+ return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
@@ -653,6 +669,7 @@
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc60000)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
}
#endif
@@ -691,7 +708,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 8a14389..a96f4a8 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -2,5 +2,5 @@
# Makefile for the SuperH specific drivers.
#
-obj-$(CONFIG_SUPERHYWAY) += superhyway/
-
+obj-$(CONFIG_SUPERHYWAY) += superhyway/
+obj-$(CONFIG_MAPLE) += maple/
diff --git a/drivers/sh/maple/Makefile b/drivers/sh/maple/Makefile
new file mode 100644
index 0000000..65dfeeb
--- /dev/null
+++ b/drivers/sh/maple/Makefile
@@ -0,0 +1,3 @@
+# Makefile for Maple Bus
+
+obj-$(CONFIG_MAPLE) := maple.o
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
new file mode 100644
index 0000000..161d102
--- /dev/null
+++ b/drivers/sh/maple/maple.c
@@ -0,0 +1,735 @@
+/*
+ * Core maple bus functionality
+ *
+ * Copyright (C) 2007 Adrian McMenamin
+ *
+ * Based on 2.4 code by:
+ *
+ * Copyright (C) 2000-2001 YAEGASHI Takeshi
+ * Copyright (C) 2001 M. R. Brown
+ * Copyright (C) 2001 Paul Mundt
+ *
+ * and others.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/maple.h>
+#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/mach/dma.h>
+#include <asm/mach/sysasic.h>
+#include <asm/mach/maple.h>
+
+MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
+MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}");
+
+static void maple_dma_handler(struct work_struct *work);
+static void maple_vblank_handler(struct work_struct *work);
+
+static DECLARE_WORK(maple_dma_process, maple_dma_handler);
+static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
+
+static LIST_HEAD(maple_waitq);
+static LIST_HEAD(maple_sentq);
+
+static DEFINE_MUTEX(maple_list_lock);
+
+static struct maple_driver maple_dummy_driver;
+static struct device maple_bus;
+static int subdevice_map[MAPLE_PORTS];
+static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
+static unsigned long maple_pnp_time;
+static int started, scanning, liststatus;
+static struct kmem_cache *maple_queue_cache;
+
+struct maple_device_specify {
+ int port;
+ int unit;
+};
+
+/**
+ * maple_driver_register - register a device driver
+ * automatically makes the driver bus a maple bus
+ * @drv: the driver to be registered
+ */
+int maple_driver_register(struct device_driver *drv)
+{
+ if (!drv)
+ return -EINVAL;
+ drv->bus = &maple_bus_type;
+ return driver_register(drv);
+}
+EXPORT_SYMBOL_GPL(maple_driver_register);
+
+/* set hardware registers to enable next round of dma */
+static void maplebus_dma_reset(void)
+{
+ ctrl_outl(MAPLE_MAGIC, MAPLE_RESET);
+ /* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */
+ ctrl_outl(1, MAPLE_TRIGTYPE);
+ ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(50000), MAPLE_SPEED);
+ ctrl_outl(PHYSADDR(maple_sendbuf), MAPLE_DMAADDR);
+ ctrl_outl(1, MAPLE_ENABLE);
+}
+
+/**
+ * maple_getcond_callback - setup handling MAPLE_COMMAND_GETCOND
+ * @dev: device responding
+ * @callback: handler callback
+ * @interval: interval in jiffies between callbacks
+ * @function: the function code for the device
+ */
+void maple_getcond_callback(struct maple_device *dev,
+ void (*callback) (struct mapleq * mq),
+ unsigned long interval, unsigned long function)
+{
+ dev->callback = callback;
+ dev->interval = interval;
+ dev->function = cpu_to_be32(function);
+ dev->when = jiffies;
+}
+EXPORT_SYMBOL_GPL(maple_getcond_callback);
+
+static int maple_dma_done(void)
+{
+ return (ctrl_inl(MAPLE_STATE) & 1) == 0;
+}
+
+static void maple_release_device(struct device *dev)
+{
+ if (dev->type) {
+ kfree(dev->type->name);
+ kfree(dev->type);
+ }
+}
+
+/**
+ * maple_add_packet - add a single instruction to the queue
+ * @mq: instruction to add to waiting queue
+ */
+void maple_add_packet(struct mapleq *mq)
+{
+ mutex_lock(&maple_list_lock);
+ list_add(&mq->list, &maple_waitq);
+ mutex_unlock(&maple_list_lock);
+}
+EXPORT_SYMBOL_GPL(maple_add_packet);
+
+static struct mapleq *maple_allocq(struct maple_device *dev)
+{
+ struct mapleq *mq;
+
+ mq = kmalloc(sizeof(*mq), GFP_KERNEL);
+ if (!mq)
+ return NULL;
+
+ mq->dev = dev;
+ mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
+ mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
+ if (!mq->recvbuf) {
+ kfree(mq);
+ return NULL;
+ }
+
+ return mq;
+}
+
+static struct maple_device *maple_alloc_dev(int port, int unit)
+{
+ struct maple_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->port = port;
+ dev->unit = unit;
+ dev->mq = maple_allocq(dev);
+
+ if (!dev->mq) {
+ kfree(dev);
+ return NULL;
+ }
+
+ return dev;
+}
+
+static void maple_free_dev(struct maple_device *mdev)
+{
+ if (!mdev)
+ return;
+ if (mdev->mq) {
+ kmem_cache_free(maple_queue_cache, mdev->mq->recvbufdcsp);
+ kfree(mdev->mq);
+ }
+ kfree(mdev);
+}
+
+/* process the command queue into a maple command block
+ * terminating command has bit 32 of first long set to 0
+ */
+static void maple_build_block(struct mapleq *mq)
+{
+ int port, unit, from, to, len;
+ unsigned long *lsendbuf = mq->sendbuf;
+
+ port = mq->dev->port & 3;
+ unit = mq->dev->unit;
+ len = mq->length;
+ from = port << 6;
+ to = (port << 6) | (unit > 0 ? (1 << (unit - 1)) & 0x1f : 0x20);
+
+ *maple_lastptr &= 0x7fffffff;
+ maple_lastptr = maple_sendptr;
+
+ *maple_sendptr++ = (port << 16) | len | 0x80000000;
+ *maple_sendptr++ = PHYSADDR(mq->recvbuf);
+ *maple_sendptr++ =
+ mq->command | (to << 8) | (from << 16) | (len << 24);
+
+ while (len-- > 0)
+ *maple_sendptr++ = *lsendbuf++;
+}
+
+/* build up command queue */
+static void maple_send(void)
+{
+ int i;
+ int maple_packets;
+ struct mapleq *mq, *nmq;
+
+ if (!list_empty(&maple_sentq))
+ return;
+ if (list_empty(&maple_waitq) || !maple_dma_done())
+ return;
+ maple_packets = 0;
+ maple_sendptr = maple_lastptr = maple_sendbuf;
+ list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
+ maple_build_block(mq);
+ list_move(&mq->list, &maple_sentq);
+ if (maple_packets++ > MAPLE_MAXPACKETS)
+ break;
+ }
+ if (maple_packets > 0) {
+ for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
+ dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
+ PAGE_SIZE, DMA_BIDIRECTIONAL);
+ }
+}
+
+static int attach_matching_maple_driver(struct device_driver *driver,
+ void *devptr)
+{
+ struct maple_driver *maple_drv;
+ struct maple_device *mdev;
+
+ mdev = devptr;
+ maple_drv = to_maple_driver(driver);
+ if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
+ if (maple_drv->connect(mdev) == 0) {
+ mdev->driver = maple_drv;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static void maple_detach_driver(struct maple_device *mdev)
+{
+ if (!mdev)
+ return;
+ if (mdev->driver) {
+ if (mdev->driver->disconnect)
+ mdev->driver->disconnect(mdev);
+ }
+ mdev->driver = NULL;
+ if (mdev->registered) {
+ maple_release_device(&mdev->dev);
+ device_unregister(&mdev->dev);
+ }
+ mdev->registered = 0;
+ maple_free_dev(mdev);
+}
+
+/* process initial MAPLE_COMMAND_DEVINFO for each device or port */
+static void maple_attach_driver(struct maple_device *dev)
+{
+ char *p;
+
+ char *recvbuf;
+ unsigned long function;
+ int matched, retval;
+
+ recvbuf = dev->mq->recvbuf;
+ memcpy(&dev->devinfo, recvbuf + 4, sizeof(dev->devinfo));
+ memcpy(dev->product_name, dev->devinfo.product_name, 30);
+ memcpy(dev->product_licence, dev->devinfo.product_licence, 60);
+ dev->product_name[30] = '\0';
+ dev->product_licence[60] = '\0';
+
+ for (p = dev->product_name + 29; dev->product_name <= p; p--)
+ if (*p == ' ')
+ *p = '\0';
+ else
+ break;
+
+ for (p = dev->product_licence + 59; dev->product_licence <= p; p--)
+ if (*p == ' ')
+ *p = '\0';
+ else
+ break;
+
+ function = be32_to_cpu(dev->devinfo.function);
+
+ if (function > 0x200) {
+ /* Do this silently - as not a real device */
+ function = 0;
+ dev->driver = &maple_dummy_driver;
+ sprintf(dev->dev.bus_id, "%d:0.port", dev->port);
+ } else {
+ printk(KERN_INFO
+ "Maple bus at (%d, %d): Connected function 0x%lX\n",
+ dev->port, dev->unit, function);
+
+ matched =
+ bus_for_each_drv(&maple_bus_type, NULL, dev,
+ attach_matching_maple_driver);
+
+ if (matched == 0) {
+ /* Driver does not exist yet */
+ printk(KERN_INFO
+ "No maple driver found for this device\n");
+ dev->driver = &maple_dummy_driver;
+ }
+
+ sprintf(dev->dev.bus_id, "%d:0%d.%lX", dev->port,
+ dev->unit, function);
+ }
+ dev->function = function;
+ dev->dev.bus = &maple_bus_type;
+ dev->dev.parent = &maple_bus;
+ dev->dev.release = &maple_release_device;
+ retval = device_register(&dev->dev);
+ if (retval) {
+ printk(KERN_INFO
+ "Maple bus: Attempt to register device (%x, %x) failed.\n",
+ dev->port, dev->unit);
+ maple_free_dev(dev);
+ }
+ dev->registered = 1;
+}
+
+/*
+ * if device has been registered for the given
+ * port and unit then return 1 - allows identification
+ * of which devices need to be attached or detached
+ */
+static int detach_maple_device(struct device *device, void *portptr)
+{
+ struct maple_device_specify *ds;
+ struct maple_device *mdev;
+
+ ds = portptr;
+ mdev = to_maple_dev(device);
+ if (mdev->port == ds->port && mdev->unit == ds->unit)
+ return 1;
+ return 0;
+}
+
+static int setup_maple_commands(struct device *device, void *ignored)
+{
+ struct maple_device *maple_dev = to_maple_dev(device);
+
+ if ((maple_dev->interval > 0)
+ && time_after(jiffies, maple_dev->when)) {
+ maple_dev->when = jiffies + maple_dev->interval;
+ maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
+ maple_dev->mq->sendbuf = &maple_dev->function;
+ maple_dev->mq->length = 1;
+ maple_add_packet(maple_dev->mq);
+ liststatus++;
+ } else {
+ if (time_after(jiffies, maple_pnp_time)) {
+ maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
+ maple_dev->mq->length = 0;
+ maple_add_packet(maple_dev->mq);
+ liststatus++;
+ }
+ }
+
+ return 0;
+}
+
+/* VBLANK bottom half - implemented via workqueue */
+static void maple_vblank_handler(struct work_struct *work)
+{
+ if (!maple_dma_done())
+ return;
+ if (!list_empty(&maple_sentq))
+ return;
+ ctrl_outl(0, MAPLE_ENABLE);
+ liststatus = 0;
+ bus_for_each_dev(&maple_bus_type, NULL, NULL,
+ setup_maple_commands);
+ if (time_after(jiffies, maple_pnp_time))
+ maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
+ if (liststatus && list_empty(&maple_sentq)) {
+ INIT_LIST_HEAD(&maple_sentq);
+ maple_send();
+ }
+ maplebus_dma_reset();
+}
+
+/* handle devices added via hotplugs - placing them on queue for DEVINFO*/
+static void maple_map_subunits(struct maple_device *mdev, int submask)
+{
+ int retval, k, devcheck;
+ struct maple_device *mdev_add;
+ struct maple_device_specify ds;
+
+ for (k = 0; k < 5; k++) {
+ ds.port = mdev->port;
+ ds.unit = k + 1;
+ retval =
+ bus_for_each_dev(&maple_bus_type, NULL, &ds,
+ detach_maple_device);
+ if (retval) {
+ submask = submask >> 1;
+ continue;
+ }
+ devcheck = submask & 0x01;
+ if (devcheck) {
+ mdev_add = maple_alloc_dev(mdev->port, k + 1);
+ if (!mdev_add)
+ return;
+ mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
+ mdev_add->mq->length = 0;
+ maple_add_packet(mdev_add->mq);
+ scanning = 1;
+ }
+ submask = submask >> 1;
+ }
+}
+
+/* mark a device as removed */
+static void maple_clean_submap(struct maple_device *mdev)
+{
+ int killbit;
+
+ killbit = (mdev->unit > 0 ? (1 << (mdev->unit - 1)) & 0x1f : 0x20);
+ killbit = ~killbit;
+ killbit &= 0xFF;
+ subdevice_map[mdev->port] = subdevice_map[mdev->port] & killbit;
+}
+
+/* handle empty port or hotplug removal */
+static void maple_response_none(struct maple_device *mdev,
+ struct mapleq *mq)
+{
+ if (mdev->unit != 0) {
+ list_del(&mq->list);
+ maple_clean_submap(mdev);
+ printk(KERN_INFO
+ "Maple bus device detaching at (%d, %d)\n",
+ mdev->port, mdev->unit);
+ maple_detach_driver(mdev);
+ return;
+ }
+ if (!started) {
+ printk(KERN_INFO "No maple devices attached to port %d\n",
+ mdev->port);
+ return;
+ }
+ maple_clean_submap(mdev);
+}
+
+/* preprocess hotplugs or scans */
+static void maple_response_devinfo(struct maple_device *mdev,
+ char *recvbuf)
+{
+ char submask;
+ if ((!started) || (scanning == 2)) {
+ maple_attach_driver(mdev);
+ return;
+ }
+ if (mdev->unit == 0) {
+ submask = recvbuf[2] & 0x1F;
+ if (submask ^ subdevice_map[mdev->port]) {
+ maple_map_subunits(mdev, submask);
+ subdevice_map[mdev->port] = submask;
+ }
+ }
+}
+
+/* maple dma end bottom half - implemented via workqueue */
+static void maple_dma_handler(struct work_struct *work)
+{
+ struct mapleq *mq, *nmq;
+ struct maple_device *dev;
+ char *recvbuf;
+ enum maple_code code;
+
+ if (!maple_dma_done())
+ return;
+ ctrl_outl(0, MAPLE_ENABLE);
+ if (!list_empty(&maple_sentq)) {
+ list_for_each_entry_safe(mq, nmq, &maple_sentq, list) {
+ recvbuf = mq->recvbuf;
+ code = recvbuf[0];
+ dev = mq->dev;
+ switch (code) {
+ case MAPLE_RESPONSE_NONE:
+ maple_response_none(dev, mq);
+ break;
+
+ case MAPLE_RESPONSE_DEVINFO:
+ maple_response_devinfo(dev, recvbuf);
+ break;
+
+ case MAPLE_RESPONSE_DATATRF:
+ if (dev->callback)
+ dev->callback(mq);
+ break;
+
+ case MAPLE_RESPONSE_FILEERR:
+ case MAPLE_RESPONSE_AGAIN:
+ case MAPLE_RESPONSE_BADCMD:
+ case MAPLE_RESPONSE_BADFUNC:
+ printk(KERN_DEBUG
+ "Maple non-fatal error 0x%X\n",
+ code);
+ break;
+
+ case MAPLE_RESPONSE_ALLINFO:
+ printk(KERN_DEBUG
+ "Maple - extended device information not supported\n");
+ break;
+
+ case MAPLE_RESPONSE_OK:
+ break;
+
+ default:
+ break;
+ }
+ }
+ INIT_LIST_HEAD(&maple_sentq);
+ if (scanning == 1) {
+ maple_send();
+ scanning = 2;
+ } else
+ scanning = 0;
+
+ if (started == 0)
+ started = 1;
+ }
+ maplebus_dma_reset();
+}
+
+static irqreturn_t maplebus_dma_interrupt(int irq, void *dev_id)
+{
+ /* Load everything into the bottom half */
+ schedule_work(&maple_dma_process);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t maplebus_vblank_interrupt(int irq, void *dev_id)
+{
+ schedule_work(&maple_vblank_process);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction maple_dma_irq = {
+ .name = "maple bus DMA handler",
+ .handler = maplebus_dma_interrupt,
+ .flags = IRQF_SHARED,
+};
+
+static struct irqaction maple_vblank_irq = {
+ .name = "maple bus VBLANK handler",
+ .handler = maplebus_vblank_interrupt,
+ .flags = IRQF_SHARED,
+};
+
+static int maple_set_dma_interrupt_handler(void)
+{
+ return setup_irq(HW_EVENT_MAPLE_DMA, &maple_dma_irq);
+}
+
+static int maple_set_vblank_interrupt_handler(void)
+{
+ return setup_irq(HW_EVENT_VSYNC, &maple_vblank_irq);
+}
+
+static int maple_get_dma_buffer(void)
+{
+ maple_sendbuf =
+ (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
+ MAPLE_DMA_PAGES);
+ if (!maple_sendbuf)
+ return -ENOMEM;
+ return 0;
+}
+
+static int match_maple_bus_driver(struct device *devptr,
+ struct device_driver *drvptr)
+{
+ struct maple_driver *maple_drv;
+ struct maple_device *maple_dev;
+
+ maple_drv = container_of(drvptr, struct maple_driver, drv);
+ maple_dev = container_of(devptr, struct maple_device, dev);
+ /* Trap empty port case */
+ if (maple_dev->devinfo.function == 0xFFFFFFFF)
+ return 0;
+ else if (maple_dev->devinfo.function &
+ be32_to_cpu(maple_drv->function))
+ return 1;
+ return 0;
+}
+
+static int maple_bus_uevent(struct device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ return 0;
+}
+
+static void maple_bus_release(struct device *dev)
+{
+}
+
+static struct maple_driver maple_dummy_driver = {
+ .drv = {
+ .name = "maple_dummy_driver",
+ .bus = &maple_bus_type,
+ },
+};
+
+struct bus_type maple_bus_type = {
+ .name = "maple",
+ .match = match_maple_bus_driver,
+ .uevent = maple_bus_uevent,
+};
+EXPORT_SYMBOL_GPL(maple_bus_type);
+
+static struct device maple_bus = {
+ .bus_id = "maple",
+ .release = maple_bus_release,
+};
+
+static int __init maple_bus_init(void)
+{
+ int retval, i;
+ struct maple_device *mdev[MAPLE_PORTS];
+ ctrl_outl(0, MAPLE_STATE);
+
+ retval = device_register(&maple_bus);
+ if (retval)
+ goto cleanup;
+
+ retval = bus_register(&maple_bus_type);
+ if (retval)
+ goto cleanup_device;
+
+ retval = driver_register(&maple_dummy_driver.drv);
+
+ if (retval)
+ goto cleanup_bus;
+
+ /* allocate memory for maple bus dma */
+ retval = maple_get_dma_buffer();
+ if (retval) {
+ printk(KERN_INFO
+ "Maple bus: Failed to allocate Maple DMA buffers\n");
+ goto cleanup_basic;
+ }
+
+ /* set up DMA interrupt handler */
+ retval = maple_set_dma_interrupt_handler();
+ if (retval) {
+ printk(KERN_INFO
+ "Maple bus: Failed to grab maple DMA IRQ\n");
+ goto cleanup_dma;
+ }
+
+ /* set up VBLANK interrupt handler */
+ retval = maple_set_vblank_interrupt_handler();
+ if (retval) {
+ printk(KERN_INFO "Maple bus: Failed to grab VBLANK IRQ\n");
+ goto cleanup_irq;
+ }
+
+ maple_queue_cache =
+ kmem_cache_create("maple_queue_cache", 0x400, 0,
+ SLAB_HWCACHE_ALIGN, NULL);
+
+ if (!maple_queue_cache)
+ goto cleanup_bothirqs;
+
+ /* setup maple ports */
+ for (i = 0; i < MAPLE_PORTS; i++) {
+ mdev[i] = maple_alloc_dev(i, 0);
+ if (!mdev[i]) {
+ while (i-- > 0)
+ maple_free_dev(mdev[i]);
+ goto cleanup_cache;
+ }
+ mdev[i]->registered = 0;
+ mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
+ mdev[i]->mq->length = 0;
+ maple_attach_driver(mdev[i]);
+ maple_add_packet(mdev[i]->mq);
+ subdevice_map[i] = 0;
+ }
+
+ /* setup maplebus hardware */
+ maplebus_dma_reset();
+
+ /* initial detection */
+ maple_send();
+
+ maple_pnp_time = jiffies;
+
+ printk(KERN_INFO "Maple bus core now registered.\n");
+
+ return 0;
+
+cleanup_cache:
+ kmem_cache_destroy(maple_queue_cache);
+
+cleanup_bothirqs:
+ free_irq(HW_EVENT_VSYNC, 0);
+
+cleanup_irq:
+ free_irq(HW_EVENT_MAPLE_DMA, 0);
+
+cleanup_dma:
+ free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES);
+
+cleanup_basic:
+ driver_unregister(&maple_dummy_driver.drv);
+
+cleanup_bus:
+ bus_unregister(&maple_bus_type);
+
+cleanup_device:
+ device_unregister(&maple_bus);
+
+cleanup:
+ printk(KERN_INFO "Maple bus registration failed\n");
+ return retval;
+}
+subsys_initcall(maple_bus_init);
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index 0899fcc..fbea2bd 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -125,8 +125,8 @@
{
struct backlight_device *bd = platform_get_drvdata(pdev);
- hp680bl_data.brightness = 0;
- hp680bl_data.power = 0;
+ bd->props.brightness = 0;
+ bd->props.power = 0;
hp680bl_send_intensity(bd);
backlight_device_unregister(bd);
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 7d6c298..06805c9 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -667,6 +667,8 @@
related */
if (cable_type == CT_COMPOSITE)
fb_writel(3 << 8, VOUTC);
+ else if (cable_type == CT_RGB)
+ fb_writel(1 << 9, VOUTC);
else
fb_writel(0, VOUTC);
@@ -890,7 +892,7 @@
pvr2_fix.mmio_start = 0xa05f8000; /* registers start here */
pvr2_fix.mmio_len = 0x2000;
- if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, 0,
+ if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, IRQF_SHARED,
"pvr2 VBL handler", fb_info)) {
return -EBUSY;
}
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
index 07f62ec..aa558da 100644
--- a/include/asm-sh/cacheflush.h
+++ b/include/asm-sh/cacheflush.h
@@ -1,16 +1,47 @@
#ifndef __ASM_SH_CACHEFLUSH_H
#define __ASM_SH_CACHEFLUSH_H
+
#ifdef __KERNEL__
-#include <linux/mm.h>
+#ifdef CONFIG_CACHE_OFF
+/*
+ * Nothing to do when the cache is disabled, initial flush and explicit
+ * disabling is handled at CPU init time.
+ *
+ * See arch/sh/kernel/cpu/init.c:cache_init().
+ */
+#define p3_cache_init() do { } while (0)
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_icache_range(start, end) do { } while (0)
+#define flush_icache_page(vma,pg) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_cache_sigtramp(vaddr) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define __flush_wback_region(start, size) do { (void)(start); } while (0)
+#define __flush_purge_region(start, size) do { (void)(start); } while (0)
+#define __flush_invalidate_region(start, size) do { (void)(start); } while (0)
+#else
#include <asm/cpu/cacheflush.h>
+/*
+ * Consistent DMA requires that the __flush_xxx() primitives must be set
+ * for any of the enabled non-coherent caches (most of the UP CPUs),
+ * regardless of PIPT or VIPT cache configurations.
+ */
+
/* Flush (write-back only) a region (smaller than a page) */
extern void __flush_wback_region(void *start, int size);
/* Flush (write-back & invalidate) a region (smaller than a page) */
extern void __flush_purge_region(void *start, int size);
/* Flush (invalidate only) a region (smaller than a page) */
extern void __flush_invalidate_region(void *start, int size);
+#endif
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h
index ffe08d2..255016f 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/include/asm-sh/cpu-sh3/cache.h
@@ -26,7 +26,9 @@
#define CCR_CACHE_ENABLE CCR_CACHE_CE
#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define CCR3 0xa40000b4
#define CCR_CACHE_16KB 0x00010000
#define CCR_CACHE_32KB 0x00020000
diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h
index 3a66dc4..54bfece 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/include/asm-sh/cpu-sh3/dma.h
@@ -1,7 +1,20 @@
#ifndef __ASM_CPU_SH3_DMA_H
#define __ASM_CPU_SH3_DMA_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define SH_DMAC_BASE 0xa4010020
+
+#define DMTE0_IRQ 48
+#define DMTE1_IRQ 49
+#define DMTE2_IRQ 50
+#define DMTE3_IRQ 51
+#define DMTE4_IRQ 76
+#define DMTE5_IRQ 77
+
+#else
#define SH_DMAC_BASE 0xa4000020
+#endif
/* Definitions for the SuperH DMAC */
#define TM_BURST 0x00000020
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/include/asm-sh/cpu-sh3/gpio.h
new file mode 100644
index 0000000..48770c1
--- /dev/null
+++ b/include/asm-sh/cpu-sh3/gpio.h
@@ -0,0 +1,66 @@
+/*
+ * include/asm-sh/cpu-sh3/gpio.h
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _CPU_SH3_GPIO_H
+#define _CPU_SH3_GPIO_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720)
+
+/* Control registers */
+#define PORT_PACR 0xA4050100UL
+#define PORT_PBCR 0xA4050102UL
+#define PORT_PCCR 0xA4050104UL
+#define PORT_PDCR 0xA4050106UL
+#define PORT_PECR 0xA4050108UL
+#define PORT_PFCR 0xA405010AUL
+#define PORT_PGCR 0xA405010CUL
+#define PORT_PHCR 0xA405010EUL
+#define PORT_PJCR 0xA4050110UL
+#define PORT_PKCR 0xA4050112UL
+#define PORT_PLCR 0xA4050114UL
+#define PORT_PMCR 0xA4050116UL
+#define PORT_PPCR 0xA4050118UL
+#define PORT_PRCR 0xA405011AUL
+#define PORT_PSCR 0xA405011CUL
+#define PORT_PTCR 0xA405011EUL
+#define PORT_PUCR 0xA4050120UL
+#define PORT_PVCR 0xA4050122UL
+
+/* Data registers */
+#define PORT_PADR 0xA4050140UL
+/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
+#define PORT_PBDR 0xA4050142UL
+#define PORT_PCDR 0xA4050144UL
+#define PORT_PDDR 0xA4050146UL
+#define PORT_PEDR 0xA4050148UL
+#define PORT_PFDR 0xA405014AUL
+#define PORT_PGDR 0xA405014CUL
+#define PORT_PHDR 0xA405014EUL
+#define PORT_PJDR 0xA4050150UL
+#define PORT_PKDR 0xA4050152UL
+#define PORT_PLDR 0xA4050154UL
+#define PORT_PMDR 0xA4050156UL
+#define PORT_PPDR 0xA4050158UL
+#define PORT_PRDR 0xA405015AUL
+#define PORT_PSDR 0xA405015CUL
+#define PORT_PTDR 0xA405015EUL
+#define PORT_PUDR 0xA4050160UL
+#define PORT_PVDR 0xA4050162UL
+
+/* Pin Select Registers */
+#define PORT_PSELA 0xA4050124UL
+#define PORT_PSELB 0xA4050126UL
+#define PORT_PSELC 0xA4050128UL
+#define PORT_PSELD 0xA405012AUL
+
+#endif
+
+#endif
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
index b20786d..16c2d63 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/include/asm-sh/cpu-sh3/mmu_context.h
@@ -27,12 +27,13 @@
#define TRA 0xffffffd0
#define EXPEVT 0xffffffd4
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710) || \
defined(CONFIG_CPU_SUBTYPE_SH7712) || \
- defined(CONFIG_CPU_SUBTYPE_SH7710)
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
#else
#define INTEVT 0xffffffd8
diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h
index b6c2020..3880ce0 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/include/asm-sh/cpu-sh3/timer.h
@@ -23,11 +23,13 @@
* ---------------------------------------------------------------------------
*/
-#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7727)
#define TMU_TOCR 0xfffffe90 /* Byte access */
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define TMU_012_TSTR 0xa412fe92 /* Byte access */
#define TMU0_TCOR 0xa412fe94 /* Long access */
@@ -56,7 +58,8 @@
#define TMU2_TCOR 0xfffffeac /* Long access */
#define TMU2_TCNT 0xfffffeb0 /* Long access */
#define TMU2_TCR 0xfffffeb4 /* Word access */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7727)
#define TMU2_TCPR2 0xfffffeb8 /* Long access */
#endif
#endif
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h
index 9d308cb..18467c5 100644
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ b/include/asm-sh/cpu-sh3/ubc.h
@@ -11,7 +11,8 @@
#ifndef __ASM_CPU_SH3_UBC_H
#define __ASM_CPU_SH3_UBC_H
-#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7720)
#define UBC_BARA 0xa4ffffb0
#define UBC_BAMRA 0xa4ffffb4
#define UBC_BBRA 0xa4ffffb8
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
index 36e26a9..aaf71b0 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/include/asm-sh/cpu-sh4/dma.h
@@ -31,7 +31,7 @@
#define TS_32 0x00000030
#define TS_64 0x00000000
-#define CHCR_TS_MASK 0x30
+#define CHCR_TS_MASK 0x70
#define CHCR_TS_SHIFT 4
#define DMAOR_COD 0x00000008
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h
index ff4c5fb..979acdd 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/include/asm-sh/cpu-sh4/mmu_context.h
@@ -22,13 +22,21 @@
#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000
#define MMU_PAGE_ASSOC_BIT 0x80
-#define MMU_NTLB_ENTRIES 64 /* for 7750 */
-#ifdef CONFIG_SH_STORE_QUEUES
-#define MMU_CONTROL_INIT 0x05 /* SQMD=0, SV=0, TI=1, AT=1 */
+#ifdef CONFIG_X2TLB
+#define MMUCR_ME (1 << 7)
#else
-#define MMU_CONTROL_INIT 0x205 /* SQMD=1, SV=0, TI=1, AT=1 */
+#define MMUCR_ME (0)
#endif
+#ifdef CONFIG_SH_STORE_QUEUES
+#define MMUCR_SQMD (1 << 9)
+#else
+#define MMUCR_SQMD (0)
+#endif
+
+#define MMU_NTLB_ENTRIES 64
+#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME)
+
#define MMU_ITLB_DATA_ARRAY 0xF3000000
#define MMU_UTLB_DATA_ARRAY 0xF7000000
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
index 4c75b70..a65b02f 100644
--- a/include/asm-sh/dma.h
+++ b/include/asm-sh/dma.h
@@ -152,14 +152,9 @@
extern int dma_extend(unsigned int chan, unsigned long op, void *param);
extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-#ifdef CONFIG_SYSFS
/* arch/sh/drivers/dma/dma-sysfs.c */
extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-#else
-#define dma_create_sysfs_file(channel, info) do { } while (0)
-#define dma_remove_sysfs_file(channel, info) do { } while (0)
-#endif
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
diff --git a/include/asm-sh/dreamcast/maple.h b/include/asm-sh/dreamcast/maple.h
new file mode 100644
index 0000000..51f6a87
--- /dev/null
+++ b/include/asm-sh/dreamcast/maple.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_MAPLE_H
+#define __ASM_MAPLE_H
+
+#define MAPLE_PORTS 4
+#define MAPLE_PNP_INTERVAL HZ
+#define MAPLE_MAXPACKETS 8
+#define MAPLE_DMA_ORDER 14
+#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
+#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
+ MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
+
+/* Maple Bus registers */
+#define MAPLE_BASE 0xa05f6c00
+#define MAPLE_DMAADDR (MAPLE_BASE+0x04)
+#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
+#define MAPLE_ENABLE (MAPLE_BASE+0x14)
+#define MAPLE_STATE (MAPLE_BASE+0x18)
+#define MAPLE_SPEED (MAPLE_BASE+0x80)
+#define MAPLE_RESET (MAPLE_BASE+0x8c)
+
+#define MAPLE_MAGIC 0x6155404f
+#define MAPLE_2MBPS 0
+#define MAPLE_TIMEOUT(n) ((n)<<15)
+
+/* Function codes */
+#define MAPLE_FUNC_CONTROLLER 0x001
+#define MAPLE_FUNC_MEMCARD 0x002
+#define MAPLE_FUNC_LCD 0x004
+#define MAPLE_FUNC_CLOCK 0x008
+#define MAPLE_FUNC_MICROPHONE 0x010
+#define MAPLE_FUNC_ARGUN 0x020
+#define MAPLE_FUNC_KEYBOARD 0x040
+#define MAPLE_FUNC_LIGHTGUN 0x080
+#define MAPLE_FUNC_PURUPURU 0x100
+#define MAPLE_FUNC_MOUSE 0x200
+
+#endif /* __ASM_MAPLE_H */
diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h
new file mode 100644
index 0000000..9bb27e0
--- /dev/null
+++ b/include/asm-sh/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-sh/gpio.h
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_GPIO_H
+#define __ASM_SH_GPIO_H
+
+#if defined(CONFIG_CPU_SH3)
+#include <asm/cpu/gpio.h>
+#endif
+
+#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h
index 4dd8592..342ca55 100644
--- a/include/asm-sh/hd64461.h
+++ b/include/asm-sh/hd64461.h
@@ -226,6 +226,7 @@
#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002)
#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
+#define OFFCHIP_IRQ_BASE 64
#define HD64461_IRQ_NUM 16
#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
diff --git a/include/asm-sh/heartbeat.h b/include/asm-sh/heartbeat.h
new file mode 100644
index 0000000..724a43e
--- /dev/null
+++ b/include/asm-sh/heartbeat.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_HEARTBEAT_H
+#define __ASM_SH_HEARTBEAT_H
+
+#include <linux/timer.h>
+
+#define HEARTBEAT_INVERTED (1 << 0)
+
+struct heartbeat_data {
+ void __iomem *base;
+ unsigned char *bit_pos;
+ unsigned int nr_bits;
+ struct timer_list timer;
+ unsigned int regsize;
+ unsigned long flags;
+};
+
+#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
index 20d4295..cb0b6c9 100644
--- a/include/asm-sh/hw_irq.h
+++ b/include/asm-sh/hw_irq.h
@@ -6,24 +6,6 @@
extern atomic_t irq_err_count;
-struct intc2_data {
- unsigned short irq;
- unsigned char ipr_offset, ipr_shift;
- unsigned char msk_offset, msk_shift;
- unsigned char priority;
-};
-
-struct intc2_desc {
- unsigned long prio_base;
- unsigned long msk_base;
- unsigned long mskclr_base;
- struct intc2_data *intc2_data;
- unsigned int nr_irqs;
- struct irq_chip chip;
-};
-
-void register_intc2_controller(struct intc2_desc *);
-
struct ipr_data {
unsigned char irq;
unsigned char ipr_idx; /* Index for the IPR registered */
@@ -41,11 +23,6 @@
void register_ipr_controller(struct ipr_desc *);
-/*
- * Enable individual interrupt mode for external IPR IRQs.
- */
-void __init ipr_irq_enable_irlm(void);
-
typedef unsigned char intc_enum;
struct intc_vect {
@@ -54,6 +31,7 @@
};
#define INTC_VECT(enum_id, vect) { enum_id, vect }
+#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
struct intc_prio {
intc_enum enum_id;
@@ -64,19 +42,25 @@
struct intc_group {
intc_enum enum_id;
- intc_enum *enum_ids;
+ intc_enum enum_ids[32];
};
-#define INTC_GROUP(enum_id, ids...) { enum_id, (intc_enum []) { ids, 0 } }
+#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
struct intc_mask_reg {
unsigned long set_reg, clr_reg, reg_width;
intc_enum enum_ids[32];
+#ifdef CONFIG_SMP
+ unsigned long smp;
+#endif
};
struct intc_prio_reg {
- unsigned long reg, reg_width, field_width;
+ unsigned long set_reg, clr_reg, reg_width, field_width;
intc_enum enum_ids[16];
+#ifdef CONFIG_SMP
+ unsigned long smp;
+#endif
};
struct intc_sense_reg {
@@ -84,6 +68,12 @@
intc_enum enum_ids[16];
};
+#ifdef CONFIG_SMP
+#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
+#else
+#define INTC_SMP(stride, nr)
+#endif
+
struct intc_desc {
struct intc_vect *vectors;
unsigned int nr_vectors;
@@ -97,25 +87,28 @@
unsigned int nr_prio_regs;
struct intc_sense_reg *sense_regs;
unsigned int nr_sense_regs;
- struct irq_chip chip;
+ char *name;
};
#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \
priorities, mask_regs, prio_regs, sense_regs) \
-struct intc_desc symbol = { \
+struct intc_desc symbol __initdata = { \
_INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
_INTC_ARRAY(priorities), \
_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
_INTC_ARRAY(sense_regs), \
- .chip.name = chipname, \
+ chipname, \
}
void __init register_intc_controller(struct intc_desc *desc);
+int intc_set_priority(unsigned int irq, unsigned int prio);
void __init plat_irq_setup(void);
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+ IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
+ IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
void __init plat_irq_setup_pins(int mode);
#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/ilsel.h b/include/asm-sh/ilsel.h
new file mode 100644
index 0000000..e3d304b
--- /dev/null
+++ b/include/asm-sh/ilsel.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_SH_ILSEL_H
+#define __ASM_SH_ILSEL_H
+
+typedef enum {
+ ILSEL_NONE,
+ ILSEL_LAN,
+ ILSEL_USBH_I,
+ ILSEL_USBH_S,
+ ILSEL_USBH_V,
+ ILSEL_RTC,
+ ILSEL_USBP_I,
+ ILSEL_USBP_S,
+ ILSEL_USBP_V,
+ ILSEL_KEY,
+
+ /*
+ * ILSEL Aliases - corner cases for interleaved level tables.
+ *
+ * Someone thought this was a good idea and less hassle than
+ * demuxing a shared vector, really.
+ */
+
+ /* ILSEL0 and 2 */
+ ILSEL_FPGA0,
+ ILSEL_FPGA1,
+ ILSEL_EX1,
+ ILSEL_EX2,
+ ILSEL_EX3,
+ ILSEL_EX4,
+
+ /* ILSEL1 and 3 */
+ ILSEL_FPGA2 = ILSEL_FPGA0,
+ ILSEL_FPGA3 = ILSEL_FPGA1,
+ ILSEL_EX5 = ILSEL_EX1,
+ ILSEL_EX6 = ILSEL_EX2,
+ ILSEL_EX7 = ILSEL_EX3,
+ ILSEL_EX8 = ILSEL_EX4,
+} ilsel_source_t;
+
+/* arch/sh/boards/renesas/x3proto/ilsel.c */
+int ilsel_enable(ilsel_source_t set);
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
+void ilsel_disable(unsigned int irq);
+
+#endif /* __ASM_SH_ILSEL_H */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index e6a1877..1a336cd 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -135,6 +135,32 @@
# define writel(v,a) ({ __raw_writel((v),(a)); mb(); })
#endif
+#define __BUILD_MEMORY_STRING(bwlq, type) \
+ \
+static inline void writes##bwlq(volatile void __iomem *mem, \
+ const void *addr, unsigned int count) \
+{ \
+ const volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ __raw_write##bwlq(*__addr, mem); \
+ __addr++; \
+ } \
+} \
+ \
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
+ unsigned int count) \
+{ \
+ volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ *__addr = __raw_read##bwlq(mem); \
+ __addr++; \
+ } \
+}
+
+__BUILD_MEMORY_STRING(b, u8)
+__BUILD_MEMORY_STRING(w, u16)
#define writesl __raw_writesl
#define readsl __raw_readsl
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 74bd095..4bc8cb1 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -17,9 +17,6 @@
#define __KGDB_H
#include <asm/ptrace.h>
-#include <asm/cacheflush.h>
-
-struct console;
/* Same as pt_regs but has vbr in place of syscall_nr */
struct kgdb_regs {
@@ -35,10 +32,7 @@
/* State info */
extern char kgdb_in_gdb_mode;
-extern int kgdb_done_init;
-extern int kgdb_enabled;
extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */
-extern int kgdb_halt; /* Execute initial breakpoint at startup */
extern char in_nmi; /* Debounce flag to prevent NMI reentry*/
/* SCI */
@@ -59,6 +53,7 @@
extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
/* Console */
+struct console;
void kgdb_console_write(struct console *co, const char *s, unsigned count);
extern int kgdb_console_setup(struct console *, char *);
@@ -69,22 +64,7 @@
extern int setjmp(jmp_buf __jmpb);
/* Forced breakpoint */
-#define breakpoint() \
-do { \
- if (kgdb_enabled) \
- __asm__ __volatile__("trapa #0x3c"); \
-} while (0)
-
-/* KGDB should be able to flush all kernel text space */
-#if defined(CONFIG_CPU_SH4)
-#define kgdb_flush_icache_range(start, end) \
-{ \
- __flush_purge_region((void*)(start), (int)(end) - (int)(start));\
- flush_icache_range((start), (end)); \
-}
-#else
-#define kgdb_flush_icache_range(start, end) do { } while (0)
-#endif
+#define breakpoint() __asm__ __volatile__("trapa #0x3c")
/* Taken from sh-stub.c of GDB 4.18 */
static const char hexchars[] = "0123456789abcdef";
diff --git a/include/asm-sh/magicpanelr2.h b/include/asm-sh/magicpanelr2.h
new file mode 100644
index 0000000..c644a77
--- /dev/null
+++ b/include/asm-sh/magicpanelr2.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-sh/magicpanelr2.h
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * I/O addresses and bitmasks for Magic Panel Release 2 board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <asm/gpio.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg)
+
+
+#define PA_LED PORT_PADR /* LED */
+
+
+/* BSC */
+#define CMNCR 0xA4FD0000UL
+#define CS0BCR 0xA4FD0004UL
+#define CS2BCR 0xA4FD0008UL
+#define CS3BCR 0xA4FD000CUL
+#define CS4BCR 0xA4FD0010UL
+#define CS5ABCR 0xA4FD0014UL
+#define CS5BBCR 0xA4FD0018UL
+#define CS6ABCR 0xA4FD001CUL
+#define CS6BBCR 0xA4FD0020UL
+#define CS0WCR 0xA4FD0024UL
+#define CS2WCR 0xA4FD0028UL
+#define CS3WCR 0xA4FD002CUL
+#define CS4WCR 0xA4FD0030UL
+#define CS5AWCR 0xA4FD0034UL
+#define CS5BWCR 0xA4FD0038UL
+#define CS6AWCR 0xA4FD003CUL
+#define CS6BWCR 0xA4FD0040UL
+
+
+/* usb */
+
+#define PORT_UTRCTL 0xA405012CUL
+#define PORT_UCLKCR_W 0xA40A0008UL
+
+#define INTC_ICR0 0xA414FEE0UL
+#define INTC_ICR1 0xA4140010UL
+#define INTC_ICR2 0xA4140012UL
+
+/* MTD */
+
+#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL
+#define MPR2_MTD_KERNEL_SIZE 0x00200000UL
+
+#endif /* __ASM_SH_MAGICPANELR2_H */
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index 6bc9bba..cb3d46c 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -70,14 +70,14 @@
extern void copy_page_nommu(void *to, void *from);
#endif
-#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
- defined(CONFIG_SH7705_CACHE_32KB))
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+ (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
struct page;
extern void clear_user_page(void *to, unsigned long address, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
extern void __clear_user_page(void *to, void *orig_to);
extern void __copy_user_page(void *to, void *from, void *orig_to);
-#elif defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH3) || !defined(CONFIG_MMU)
+#else
#define clear_user_page(page, vaddr, pg) clear_page(page)
#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
#endif
@@ -88,6 +88,7 @@
#ifdef CONFIG_X2TLB
typedef struct { unsigned long pte_low, pte_high; } pte_t;
typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgd; } pgd_t;
#define pte_val(x) \
((x).pte_low | ((unsigned long long)(x).pte_high << 32))
#define __pte(x) \
@@ -95,12 +96,11 @@
#else
typedef struct { unsigned long pte_low; } pte_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
#define pte_val(x) ((x).pte_low)
#define __pte(x) ((pte_t) { (x) } )
#endif
-typedef struct { unsigned long pgd; } pgd_t;
-
#define pgd_val(x) ((x).pgd)
#define pgprot_val(x) ((x).pgprot)
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index e3fae12..cf0dd2b 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -42,13 +42,12 @@
/* PGD bits */
#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS)
-#define PGDIR_BITS (32 - PGDIR_SHIFT)
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/* Entries per level */
#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define PTRS_PER_PGD (PAGE_SIZE / 4)
+#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t))
#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
@@ -100,17 +99,18 @@
#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */
#define _PAGE_DIRTY 0x004 /* D-bit : page changed */
#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */
-#ifndef CONFIG_X2TLB
-# define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
-# define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
-# define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/
-# define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
-#endif
+#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
+#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
+#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/
+#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */
#define _PAGE_PROTNONE 0x200 /* software: if not present */
#define _PAGE_ACCESSED 0x400 /* software: page referenced */
#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */
+#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1)
+#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER)
+
/* Extended mode bits */
#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */
#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */
@@ -126,11 +126,7 @@
#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */
/* Wrapper for extended mode pgprot twiddling */
-#ifdef CONFIG_X2TLB
-# define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
-#else
-# define _PAGE_EXT(x) (0)
-#endif
+#define _PAGE_EXT(x) ((unsigned long long)(x) << 32)
/* software: moves to PTEA.TC (Timing Control) */
#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */
@@ -146,10 +142,14 @@
#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */
/* Mask which drops unused bits from the PTEL value */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3)
#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \
_PAGE_FILE | _PAGE_SZ1 | \
_PAGE_HW_SHARED)
+#elif defined(CONFIG_X2TLB)
+/* Get rid of the legacy PR/SZ bits when using extended mode */
+#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \
+ _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
#else
#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
#endif
@@ -212,27 +212,36 @@
#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
_PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_USER_READ | \
+ _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+ _PAGE_EXT_KERN_WRITE | \
+ _PAGE_EXT_USER_READ | \
_PAGE_EXT_USER_WRITE))
#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
_PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_USER_EXEC | \
+ _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
+ _PAGE_EXT_KERN_READ | \
+ _PAGE_EXT_USER_EXEC | \
_PAGE_EXT_USER_READ))
#define PAGE_COPY PAGE_EXECREAD
#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
_PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_USER_READ))
+ _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+ _PAGE_EXT_USER_READ))
#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
_PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_USER_WRITE))
+ _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+ _PAGE_EXT_USER_WRITE))
#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
_PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
- _PAGE_EXT(_PAGE_EXT_USER_WRITE | \
+ _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+ _PAGE_EXT_KERN_READ | \
+ _PAGE_EXT_KERN_EXEC | \
+ _PAGE_EXT_USER_WRITE | \
_PAGE_EXT_USER_READ | \
_PAGE_EXT_USER_EXEC))
@@ -373,11 +382,15 @@
#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pte_none(x) (!pte_val(x))
-#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pfn_pte(pfn, prot) \
+ __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) \
+ __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(x) (!pte_val(x))
+#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
#define pmd_none(x) (!pmd_val(x))
@@ -392,15 +405,15 @@
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
-#define pte_not_present(pte) (!(pte_val(pte) & _PAGE_PRESENT))
-#define pte_dirty(pte) (pte_val(pte) & _PAGE_DIRTY)
-#define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED)
-#define pte_file(pte) (pte_val(pte) & _PAGE_FILE)
+#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT))
+#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY)
+#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED)
+#define pte_file(pte) ((pte).pte_low & _PAGE_FILE)
#ifdef CONFIG_X2TLB
#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE)
#else
-#define pte_write(pte) (pte_val(pte) & _PAGE_RW)
+#define pte_write(pte) ((pte).pte_low & _PAGE_RW)
#endif
#define PTE_BIT_FUNC(h,fn,op) \
@@ -429,17 +442,10 @@
/*
* Macro and implementation to make a page protection as uncachable.
*/
-#define pgprot_noncached pgprot_noncached
+#define pgprot_writecombine(prot) \
+ __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-static inline pgprot_t pgprot_noncached(pgprot_t _prot)
-{
- unsigned long prot = pgprot_val(_prot);
-
- prot &= ~_PAGE_CACHABLE;
- return __pgprot(prot);
-}
-
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+#define pgprot_noncached pgprot_writecombine
/*
* Conversion functions: convert a page and protection to a page entry,
@@ -451,28 +457,33 @@
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) |
- pgprot_val(newprot)));
+ pte.pte_low &= _PAGE_CHG_MASK;
+ pte.pte_low |= pgprot_val(newprot);
+
+#ifdef CONFIG_X2TLB
+ pte.pte_high |= pgprot_val(newprot) >> 32;
+#endif
+
return pte;
}
-#define pmd_page_vaddr(pmd) pmd_val(pmd)
+#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd))
#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
/* to find an entry in a page-table-directory. */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
/* Find an entry in the third-level page table.. */
-#define pte_index(address) \
- ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_kernel(dir, address) \
((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
-#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
+
#define pte_unmap(pte) do { } while (0)
#define pte_unmap_nested(pte) do { } while (0)
@@ -480,13 +491,14 @@
#define pte_ERROR(e) \
printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
&(e), (e).pte_high, (e).pte_low)
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
#else
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#endif
-
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#endif
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct * vma,
@@ -563,7 +575,8 @@
extern unsigned int kobjsize(const void *objp);
#endif /* !CONFIG_MMU */
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+ defined(CONFIG_SH7705_CACHE_32KB))
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
#endif
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 26d5217..4f2922a 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -45,7 +45,7 @@
CPU_SH7705, CPU_SH7706, CPU_SH7707,
CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
- CPU_SH7729,
+ CPU_SH7720, CPU_SH7729,
/* SH-4 types */
CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
@@ -73,15 +73,10 @@
unsigned long flags;
} __attribute__ ((aligned(SMP_CACHE_BYTES)));
-extern struct sh_cpuinfo boot_cpu_data;
-
-#ifdef CONFIG_SMP
extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
#define current_cpu_data cpu_data[smp_processor_id()]
-#else
-#define cpu_data (&boot_cpu_data)
-#define current_cpu_data boot_cpu_data
-#endif
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
/*
* User space process size: 2GB.
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
index 4083b59..de37f93 100644
--- a/include/asm-sh/r7780rp.h
+++ b/include/asm-sh/r7780rp.h
@@ -65,24 +65,6 @@
#define PA_PMR (PA_BCR+0x0900) /* */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
-#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
-#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
-#define IRQ_TP 2 /* Touch Panel IRQ */
-#define IRQ_SCI1 3 /* SCI1 IRQ */
-#define IRQ_SCI0 4 /* SCI0 IRQ */
-#define IRQ_2SERIAL 5 /* Serial IRQ */
-#define IRQ_RTC 6 /* RTC A / B IRQ */
-#define IRQ_EXTENTION6 7 /* EXT6n IRQ */
-#define IRQ_EXTENTION5 8 /* EXT5n IRQ */
-#define IRQ_EXTENTION4 9 /* EXT4n IRQ */
-#define IRQ_EXTENTION2 10 /* EXT2n IRQ */
-#define IRQ_EXTENTION1 11 /* EXT1n IRQ */
-#define IRQ_ONETH 13 /* On board Ethernet IRQ */
-#define IRQ_PSW 14 /* Push Switch IRQ */
-
#define IVDR_CK_ON 8 /* iVDR Clock ON */
#elif defined(CONFIG_SH_R7780RP)
@@ -203,11 +185,24 @@
#define PA_MMSR (PA_BCR+0x0400)
#define IVDR_CK_ON 4 /* iVDR Clock ON */
-
#endif
+#define HL_FPGA_IRQ_BASE 200
+#define HL_NR_IRL 15
+
+#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
+#ifndef IRQ_PSW
+#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
+#endif
+#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 4)
+
void make_r7780rp_irq(unsigned int irq);
-void highlander_init_irq(void);
+
+unsigned char *highlander_init_irq_r7780mp(void);
+unsigned char *highlander_init_irq_r7780rp(void);
+unsigned char *highlander_init_irq_r7785rp(void);
#define __IO_PREFIX r7780rp
#include <asm/io_generic.h>
diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h
index 91aacc9..858da99 100644
--- a/include/asm-sh/rtc.h
+++ b/include/asm-sh/rtc.h
@@ -5,4 +5,10 @@
extern void (*rtc_sh_get_time)(struct timespec *);
extern int (*rtc_sh_set_time)(const time_t);
+#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
+
+struct sh_rtc_platform_info {
+ unsigned long capabilities;
+};
+
#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h
index 5d7800a..83b9c11 100644
--- a/include/asm-sh/rts7751r2d.h
+++ b/include/asm-sh/rts7751r2d.h
@@ -9,7 +9,7 @@
* Renesas Technology Sales RTS7751R2D support
*/
-/* Box specific addresses. */
+/* Board specific addresses. */
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
@@ -20,19 +20,19 @@
#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
#define PA_PCICD 0xa400000e /* PCI Extention detect control */
#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
-#if defined(CONFIG_RTS7751R2D_REV11)
-#define PA_AXRST 0xa4000022 /* AX_LAN Reset control */
-#define PA_CFRST 0xa4000024 /* CF Reset control */
-#define PA_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_EXTRST 0xa4000028 /* Extention Reset control */
-#define PA_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
-#else
-#define PA_CFRST 0xa4000022 /* CF Reset control */
-#define PA_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_EXTRST 0xa4000026 /* Extention Reset control */
-#define PA_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
-#define PA_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
-#endif
+
+#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
+#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
+#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
+#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */
+#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
+
+#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
+#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
+#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */
+#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
+#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
+
#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
#define PA_VERREG 0xa4000032 /* FPGA Version Register */
#define PA_INPORT 0xa4000034 /* KEY Input Port control */
@@ -46,27 +46,22 @@
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#if defined(CONFIG_RTS7751R2D_REV11)
-#define IRQ_PCIETH 0 /* PCI Ethernet IRQ */
-#define IRQ_CFCARD 1 /* CF Card IRQ */
-#define IRQ_CFINST 2 /* CF Card Insert IRQ */
-#define IRQ_PCMCIA 3 /* PCMCIA IRQ */
-#define IRQ_VOYAGER 4 /* VOYAGER IRQ */
-#define IRQ_ONETH 5 /* On board Ethernet IRQ */
-#else
-#define IRQ_KEYIN 0 /* Key Input IRQ */
-#define IRQ_PCIETH 1 /* PCI Ethernet IRQ */
-#define IRQ_CFCARD 2 /* CF Card IRQ */
-#define IRQ_CFINST 3 /* CF Card Insert IRQ */
-#define IRQ_PCMCIA 4 /* PCMCIA IRQ */
-#define IRQ_VOYAGER 5 /* VOYAGER IRQ */
-#endif
-#define IRQ_RTCALM 6 /* RTC Alarm IRQ */
-#define IRQ_RTCTIME 7 /* RTC Timer IRQ */
-#define IRQ_SDCARD 8 /* SD Card IRQ */
-#define IRQ_PCISLOT1 9 /* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */
-#define IRQ_EXTENTION 11 /* EXTn IRQ */
+#define R2D_FPGA_IRQ_BASE 100
+
+#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
+#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
+#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
+#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
+#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
+#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
+#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
+#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
+#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
+#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
+#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
+#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
+#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
+#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
/* arch/sh/boards/renesas/rts7751r2d/irq.c */
void init_rts7751r2d_IRQ(void);
diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h
index 2a696b8..bd9cbc9 100644
--- a/include/asm-sh/sections.h
+++ b/include/asm-sh/sections.h
@@ -4,6 +4,7 @@
#include <asm-generic/sections.h>
extern long __machvec_start, __machvec_end;
+extern char _ebss[];
#endif /* __ASM_SH_SECTIONS_H */
diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h
index 4ff1eb9..c39c785 100644
--- a/include/asm-sh/sh03/io.h
+++ b/include/asm-sh/sh03/io.h
@@ -11,22 +11,13 @@
#include <linux/time.h>
-#define INTC_IPRD 0xffd00010UL
-
#define IRL0_IRQ 2
-#define IRL0_IPR_POS 3
#define IRL0_PRIORITY 13
-
#define IRL1_IRQ 5
-#define IRL1_IPR_POS 2
#define IRL1_PRIORITY 10
-
#define IRL2_IRQ 8
-#define IRL2_IPR_POS 1
#define IRL2_PRIORITY 7
-
#define IRL3_IRQ 11
-#define IRL3_IPR_POS 0
#define IRL3_PRIORITY 4
void heartbeat_sh03(void);
diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h
index b99ca78..9c8d34b0 100644
--- a/include/asm-sh/smp.h
+++ b/include/asm-sh/smp.h
@@ -1,12 +1,3 @@
-/*
- * include/asm-sh/smp.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive for
- * more details.
- */
#ifndef __ASM_SH_SMP_H
#define __ASM_SH_SMP_H
@@ -20,6 +11,15 @@
#include <asm/current.h>
#define raw_smp_processor_id() (current_thread_info()->cpu)
+#define hard_smp_processor_id() plat_smp_processor_id()
+
+/* Map from cpu id to sequential logical cpu number. */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu) __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id. */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
/* I've no idea what the real meaning of this is */
#define PROC_CHANGE_PENALTY 20
@@ -35,10 +35,22 @@
extern struct smp_fn_call_struct smp_fn_call;
-#define SMP_MSG_RESCHEDULE 0x0001
+#define SMP_MSG_FUNCTION 0
+#define SMP_MSG_RESCHEDULE 1
+#define SMP_MSG_NR 2
-#endif /* CONFIG_SMP */
+void plat_smp_setup(void);
+void plat_prepare_cpus(unsigned int max_cpus);
+int plat_smp_processor_id(void);
+void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
+void plat_send_ipi(unsigned int cpu, unsigned int message);
+int plat_register_ipi_handler(unsigned int message,
+ void (*handler)(void *), void *arg);
+
+#else
#define hard_smp_processor_id() (0)
+#endif /* CONFIG_SMP */
+
#endif /* __ASM_SH_SMP_H */
diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h
index 3554e3a..042d95f 100644
--- a/include/asm-sh/snapgear.h
+++ b/include/asm-sh/snapgear.h
@@ -19,20 +19,16 @@
* is the interrupt :-)
*/
-#define IRL0_IRQ 2
-#define IRL0_IPR_POS 3
+#define IRL0_IRQ 2
#define IRL0_PRIORITY 13
-#define IRL1_IRQ 5
-#define IRL1_IPR_POS 2
+#define IRL1_IRQ 5
#define IRL1_PRIORITY 10
-#define IRL2_IRQ 8
-#define IRL2_IPR_POS 1
+#define IRL2_IRQ 8
#define IRL2_PRIORITY 7
-#define IRL3_IRQ 11
-#define IRL3_IPR_POS 0
+#define IRL3_IRQ 11
#define IRL3_PRIORITY 4
#endif
diff --git a/include/asm-sh/spinlock.h b/include/asm-sh/spinlock.h
index 92f6e20..e793181 100644
--- a/include/asm-sh/spinlock.h
+++ b/include/asm-sh/spinlock.h
@@ -2,6 +2,7 @@
* include/asm-sh/spinlock.h
*
* Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2006, 2007 Akio Idehara
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -10,17 +11,22 @@
#ifndef __ASM_SH_SPINLOCK_H
#define __ASM_SH_SPINLOCK_H
-#include <asm/atomic.h>
-#include <asm/spinlock_types.h>
+/*
+ * The only locking implemented here uses SH-4A opcodes. For others,
+ * split this out as per atomic-*.h.
+ */
+#ifndef CONFIG_CPU_SH4A
+#error "Need movli.l/movco.l for spinlocks"
+#endif
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
*/
-#define __raw_spin_is_locked(x) ((x)->lock != 0)
+#define __raw_spin_is_locked(x) ((x)->lock <= 0)
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
#define __raw_spin_unlock_wait(x) \
- do { cpu_relax(); } while (__raw_spin_is_locked(x))
+ do { cpu_relax(); } while ((x)->lock)
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
@@ -30,12 +36,19 @@
*/
static inline void __raw_spin_lock(raw_spinlock_t *lock)
{
+ unsigned long tmp;
+ unsigned long oldval;
+
__asm__ __volatile__ (
- "1:\n\t"
- "tas.b @%0\n\t"
- "bf/s 1b\n\t"
- "nop\n\t"
- : "=r" (lock->lock)
+ "1: \n\t"
+ "movli.l @%2, %0 ! __raw_spin_lock \n\t"
+ "mov %0, %1 \n\t"
+ "mov #0, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
+ "bf 1b \n\t"
+ "cmp/pl %1 \n\t"
+ "bf 1b \n\t"
+ : "=&z" (tmp), "=&r" (oldval)
: "r" (&lock->lock)
: "t", "memory"
);
@@ -43,12 +56,36 @@
static inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
- //assert_spin_locked(lock);
+ unsigned long tmp;
- lock->lock = 0;
+ __asm__ __volatile__ (
+ "mov #1, %0 ! __raw_spin_unlock \n\t"
+ "mov.l %0, @%1 \n\t"
+ : "=&z" (tmp)
+ : "r" (&lock->lock)
+ : "t", "memory"
+ );
}
-#define __raw_spin_trylock(x) (!test_and_set_bit(0, &(x)->lock))
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+ unsigned long tmp, oldval;
+
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "movli.l @%2, %0 ! __raw_spin_trylock \n\t"
+ "mov %0, %1 \n\t"
+ "mov #0, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
+ "bf 1b \n\t"
+ "synco \n\t"
+ : "=&z" (tmp), "=&r" (oldval)
+ : "r" (&lock->lock)
+ : "t", "memory"
+ );
+
+ return oldval;
+}
/*
* Read-write spinlocks, allowing multiple readers but only one writer.
@@ -59,58 +96,124 @@
* read-locks.
*/
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(x) ((x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
- __raw_spin_lock(&rw->lock);
+ unsigned long tmp;
- atomic_inc(&rw->counter);
-
- __raw_spin_unlock(&rw->lock);
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "movli.l @%1, %0 ! __raw_read_lock \n\t"
+ "cmp/pl %0 \n\t"
+ "bf 1b \n\t"
+ "add #-1, %0 \n\t"
+ "movco.l %0, @%1 \n\t"
+ "bf 1b \n\t"
+ : "=&z" (tmp)
+ : "r" (&rw->lock)
+ : "t", "memory"
+ );
}
static inline void __raw_read_unlock(raw_rwlock_t *rw)
{
- __raw_spin_lock(&rw->lock);
+ unsigned long tmp;
- atomic_dec(&rw->counter);
-
- __raw_spin_unlock(&rw->lock);
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "movli.l @%1, %0 ! __raw_read_unlock \n\t"
+ "add #1, %0 \n\t"
+ "movco.l %0, @%1 \n\t"
+ "bf 1b \n\t"
+ : "=&z" (tmp)
+ : "r" (&rw->lock)
+ : "t", "memory"
+ );
}
static inline void __raw_write_lock(raw_rwlock_t *rw)
{
- __raw_spin_lock(&rw->lock);
- atomic_set(&rw->counter, -1);
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "movli.l @%1, %0 ! __raw_write_lock \n\t"
+ "cmp/hs %2, %0 \n\t"
+ "bf 1b \n\t"
+ "sub %2, %0 \n\t"
+ "movco.l %0, @%1 \n\t"
+ "bf 1b \n\t"
+ : "=&z" (tmp)
+ : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+ : "t", "memory"
+ );
}
static inline void __raw_write_unlock(raw_rwlock_t *rw)
{
- atomic_set(&rw->counter, 0);
- __raw_spin_unlock(&rw->lock);
+ __asm__ __volatile__ (
+ "mov.l %1, @%0 ! __raw_write_unlock \n\t"
+ :
+ : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+ : "t", "memory"
+ );
}
-static inline int __raw_write_can_lock(raw_rwlock_t *rw)
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
{
- return (atomic_read(&rw->counter) == RW_LOCK_BIAS);
-}
+ unsigned long tmp, oldval;
-static inline int __raw_read_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t*)lock;
- if (atomic_dec_return(count) >= 0)
- return 1;
- atomic_inc(count);
- return 0;
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "movli.l @%2, %0 ! __raw_read_trylock \n\t"
+ "mov %0, %1 \n\t"
+ "cmp/pl %0 \n\t"
+ "bf 2f \n\t"
+ "add #-1, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
+ "bf 1b \n\t"
+ "2: \n\t"
+ "synco \n\t"
+ : "=&z" (tmp), "=&r" (oldval)
+ : "r" (&rw->lock)
+ : "t", "memory"
+ );
+
+ return (oldval > 0);
}
static inline int __raw_write_trylock(raw_rwlock_t *rw)
{
- if (atomic_sub_and_test(RW_LOCK_BIAS, &rw->counter))
- return 1;
-
- atomic_add(RW_LOCK_BIAS, &rw->counter);
+ unsigned long tmp, oldval;
- return 0;
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "movli.l @%2, %0 ! __raw_write_trylock \n\t"
+ "mov %0, %1 \n\t"
+ "cmp/hs %3, %0 \n\t"
+ "bf 2f \n\t"
+ "sub %3, %0 \n\t"
+ "2: \n\t"
+ "movco.l %0, @%2 \n\t"
+ "bf 1b \n\t"
+ "synco \n\t"
+ : "=&z" (tmp), "=&r" (oldval)
+ : "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+ : "t", "memory"
+ );
+
+ return (oldval > (RW_LOCK_BIAS - 1));
}
#define _raw_spin_relax(lock) cpu_relax()
diff --git a/include/asm-sh/spinlock_types.h b/include/asm-sh/spinlock_types.h
index 5c58134..b4d244e 100644
--- a/include/asm-sh/spinlock_types.h
+++ b/include/asm-sh/spinlock_types.h
@@ -6,19 +6,16 @@
#endif
typedef struct {
- volatile unsigned long lock;
+ volatile unsigned int lock;
} raw_spinlock_t;
-#define __RAW_SPIN_LOCK_UNLOCKED { 1 }
-
-#include <asm/atomic.h>
+#define __RAW_SPIN_LOCK_UNLOCKED { 1 }
typedef struct {
- raw_spinlock_t lock;
- atomic_t counter;
+ volatile unsigned int lock;
} raw_rwlock_t;
#define RW_LOCK_BIAS 0x01000000
-#define __RAW_RW_LOCK_UNLOCKED { { 0 }, { RW_LOCK_BIAS } }
+#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
#endif
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
index 2450425..9d849e6 100644
--- a/include/asm-sh/system.h
+++ b/include/asm-sh/system.h
@@ -266,6 +266,7 @@
void enable_hlt(void);
void default_idle(void);
+void per_cpu_trap_init(void);
asmlinkage void break_point_trap(void);
asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5,
diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h
index 64c936b..d825596 100644
--- a/include/asm-sh/voyagergx.h
+++ b/include/asm-sh/voyagergx.h
@@ -27,13 +27,35 @@
#define VOYAGER_UART_BASE (0x30000 + VOYAGER_BASE)
#define VOYAGER_AC97_BASE (0xa0000 + VOYAGER_BASE)
-#define VOYAGER_IRQ_NUM 32
-#define VOYAGER_IRQ_BASE 50
-#define VOYAGER_USBH_IRQ VOYAGER_IRQ_BASE + 6
-#define VOYAGER_8051_IRQ VOYAGER_IRQ_BASE + 10
-#define VOYAGER_UART0_IRQ VOYAGER_IRQ_BASE + 12
-#define VOYAGER_UART1_IRQ VOYAGER_IRQ_BASE + 13
-#define VOYAGER_AC97_IRQ VOYAGER_IRQ_BASE + 17
+#define VOYAGER_IRQ_NUM 26
+#define VOYAGER_IRQ_BASE 200
+
+#define IRQ_SM501_UP (VOYAGER_IRQ_BASE + 0)
+#define IRQ_SM501_G54 (VOYAGER_IRQ_BASE + 1)
+#define IRQ_SM501_G53 (VOYAGER_IRQ_BASE + 2)
+#define IRQ_SM501_G52 (VOYAGER_IRQ_BASE + 3)
+#define IRQ_SM501_G51 (VOYAGER_IRQ_BASE + 4)
+#define IRQ_SM501_G50 (VOYAGER_IRQ_BASE + 5)
+#define IRQ_SM501_G49 (VOYAGER_IRQ_BASE + 6)
+#define IRQ_SM501_G48 (VOYAGER_IRQ_BASE + 7)
+#define IRQ_SM501_I2C (VOYAGER_IRQ_BASE + 8)
+#define IRQ_SM501_PW (VOYAGER_IRQ_BASE + 9)
+#define IRQ_SM501_DMA (VOYAGER_IRQ_BASE + 10)
+#define IRQ_SM501_PCI (VOYAGER_IRQ_BASE + 11)
+#define IRQ_SM501_I2S (VOYAGER_IRQ_BASE + 12)
+#define IRQ_SM501_AC (VOYAGER_IRQ_BASE + 13)
+#define IRQ_SM501_US (VOYAGER_IRQ_BASE + 14)
+#define IRQ_SM501_U1 (VOYAGER_IRQ_BASE + 15)
+#define IRQ_SM501_U0 (VOYAGER_IRQ_BASE + 16)
+#define IRQ_SM501_CV (VOYAGER_IRQ_BASE + 17)
+#define IRQ_SM501_MC (VOYAGER_IRQ_BASE + 18)
+#define IRQ_SM501_S1 (VOYAGER_IRQ_BASE + 19)
+#define IRQ_SM501_S0 (VOYAGER_IRQ_BASE + 20)
+#define IRQ_SM501_UH (VOYAGER_IRQ_BASE + 21)
+#define IRQ_SM501_2D (VOYAGER_IRQ_BASE + 22)
+#define IRQ_SM501_ZD (VOYAGER_IRQ_BASE + 23)
+#define IRQ_SM501_PV (VOYAGER_IRQ_BASE + 24)
+#define IRQ_SM501_CI (VOYAGER_IRQ_BASE + 25)
/* ----- MISC controle register ------------------------------ */
#define MISC_CTRL (0x000004 + VOYAGER_BASE)
@@ -313,4 +335,7 @@
void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
+/* arch/sh/cchips/voyagergx/irq.c */
+void setup_voyagergx_irq(void);
+
#endif /* _VOYAGER_GX_REG_H */
diff --git a/include/asm-sh64/gpio.h b/include/asm-sh64/gpio.h
new file mode 100644
index 0000000..6bc5a13
--- /dev/null
+++ b/include/asm-sh64/gpio.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH64_GPIO_H
+#define __ASM_SH64_GPIO_H
+
+/*
+ * This is just a stub, so that every arch using sh-sci has a gpio.h
+ */
+
+#endif /* __ASM_SH64_GPIO_H */
diff --git a/include/linux/maple.h b/include/linux/maple.h
new file mode 100644
index 0000000..bad9a7b
--- /dev/null
+++ b/include/linux/maple.h
@@ -0,0 +1,80 @@
+#ifndef __LINUX_MAPLE_H
+#define __LINUX_MAPLE_H
+
+#include <linux/device.h>
+
+extern struct bus_type maple_bus_type;
+
+/* Maple Bus command and response codes */
+enum maple_code {
+ MAPLE_RESPONSE_FILEERR = -5,
+ MAPLE_RESPONSE_AGAIN = -4, /* request should be retransmitted */
+ MAPLE_RESPONSE_BADCMD = -3,
+ MAPLE_RESPONSE_BADFUNC = -2,
+ MAPLE_RESPONSE_NONE = -1, /* unit didn't respond at all */
+ MAPLE_COMMAND_DEVINFO = 1,
+ MAPLE_COMMAND_ALLINFO = 2,
+ MAPLE_COMMAND_RESET = 3,
+ MAPLE_COMMAND_KILL = 4,
+ MAPLE_RESPONSE_DEVINFO = 5,
+ MAPLE_RESPONSE_ALLINFO = 6,
+ MAPLE_RESPONSE_OK = 7,
+ MAPLE_RESPONSE_DATATRF = 8,
+ MAPLE_COMMAND_GETCOND = 9,
+ MAPLE_COMMAND_GETMINFO = 10,
+ MAPLE_COMMAND_BREAD = 11,
+ MAPLE_COMMAND_BWRITE = 12,
+ MAPLE_COMMAND_SETCOND = 14
+};
+
+struct mapleq {
+ struct list_head list;
+ struct maple_device *dev;
+ void *sendbuf, *recvbuf, *recvbufdcsp;
+ unsigned char length;
+ enum maple_code command;
+};
+
+struct maple_devinfo {
+ unsigned long function;
+ unsigned long function_data[3];
+ unsigned char area_code;
+ unsigned char connector_directon;
+ char product_name[31];
+ char product_licence[61];
+ unsigned short standby_power;
+ unsigned short max_power;
+};
+
+struct maple_device {
+ struct maple_driver *driver;
+ struct mapleq *mq;
+ void *private_data;
+ void (*callback) (struct mapleq * mq);
+ unsigned long when, interval, function;
+ struct maple_devinfo devinfo;
+ unsigned char port, unit;
+ char product_name[32];
+ char product_licence[64];
+ int registered;
+ struct device dev;
+};
+
+struct maple_driver {
+ unsigned long function;
+ int (*connect) (struct maple_device * dev);
+ void (*disconnect) (struct maple_device * dev);
+ struct device_driver drv;
+};
+
+void maple_getcond_callback(struct maple_device *dev,
+ void (*callback) (struct mapleq * mq),
+ unsigned long interval,
+ unsigned long function);
+int maple_driver_register(struct device_driver *drv);
+void maple_add_packet(struct mapleq *mq);
+
+#define to_maple_dev(n) container_of(n, struct maple_device, dev)
+#define to_maple_driver(n) container_of(n, struct maple_driver, drv)
+
+#endif /* __LINUX_MAPLE_H */