i2c-omap: Fix I2C status ACK
I2C status ack for [RX]RDR and [RX]RDY could
cause race conditions of clearing the event
twice and a violation of the programing
sequence as defined in TRM This patch fixes
the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d258b02..94639d0 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -674,7 +674,14 @@
err = 0;
complete:
- omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
+ /*
+ * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
+ * acked after the data operation is complete.
+ * Ref: TRM SWPU114Q Figure 18-31
+ */
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
+ ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+ OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
if (stat & OMAP_I2C_STAT_NACK) {
err |= OMAP_I2C_STAT_NACK;