diff --git a/drivers/net/wireless/cw1200/sta.c b/drivers/net/wireless/cw1200/sta.c
index a1e3237..4a47c7f 100644
--- a/drivers/net/wireless/cw1200/sta.c
+++ b/drivers/net/wireless/cw1200/sta.c
@@ -709,7 +709,8 @@
 		if (sta)
 			peer_addr = sta->addr;
 
-		key->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE;
+		key->flags |= IEEE80211_KEY_FLAG_PUT_IV_SPACE |
+			      IEEE80211_KEY_FLAG_RESERVE_TAILROOM;
 
 		switch (key->cipher) {
 		case WLAN_CIPHER_SUITE_WEP40:
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 97aeff0..13a30c4 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -575,6 +575,8 @@
 			key->hw_key_idx = 0xff;
 			goto out_unlock;
 		}
+
+		key->flags |= IEEE80211_KEY_FLAG_RESERVE_TAILROOM;
 	} else {
 		slot = key->hw_key_idx;
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ece1a54..555a845 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1281,7 +1281,8 @@
  *
  * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
  *	driver to indicate that it requires IV generation for this
- *	particular key.
+ *	particular key. Setting this flag does not necessarily mean that SKBs
+ *	will have sufficient tailroom for ICV or MIC.
  * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
  *	the driver for a TKIP key if it requires Michael MIC
  *	generation in software.
@@ -1293,7 +1294,9 @@
  * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
  *	if space should be prepared for the IV, but the IV
  *	itself should not be generated. Do not set together with
- *	@IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
+ *	@IEEE80211_KEY_FLAG_GENERATE_IV on the same key. Setting this flag does
+ *	not necessarily mean that SKBs will have sufficient tailroom for ICV or
+ *	MIC.
  * @IEEE80211_KEY_FLAG_RX_MGMT: This key will be used to decrypt received
  *	management frames. The flag can help drivers that have a hardware
  *	crypto implementation that doesn't deal with management frames
@@ -1304,6 +1307,9 @@
  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
  *	driver for a CCMP key to indicate that is requires IV generation
  *	only for managment frames (MFP).
+ * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
+ *	driver for a key to indicate that sufficient tailroom must always
+ *	be reserved for ICV or MIC, even when HW encryption is enabled.
  */
 enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_GENERATE_IV_MGMT	= BIT(0),
@@ -1313,6 +1319,7 @@
 	IEEE80211_KEY_FLAG_SW_MGMT_TX		= BIT(4),
 	IEEE80211_KEY_FLAG_PUT_IV_SPACE		= BIT(5),
 	IEEE80211_KEY_FLAG_RX_MGMT		= BIT(6),
+	IEEE80211_KEY_FLAG_RESERVE_TAILROOM	= BIT(7),
 };
 
 /**
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index bd4e46e..f8d9f0e 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -141,8 +141,7 @@
 		key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
 
 		if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-		      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
-		      (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
+		      (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM)))
 			sdata->crypto_tx_tailroom_needed_cnt--;
 
 		WARN_ON((key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
@@ -191,8 +190,7 @@
 	sdata = key->sdata;
 
 	if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-	      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
-	      (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
+	      (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM)))
 		increment_tailroom_need_count(sdata);
 
 	ret = drv_set_key(key->local, DISABLE_KEY, sdata,
@@ -889,8 +887,7 @@
 		key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
 
 		if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
-		      (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
-		      (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
+		      (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM)))
 			increment_tailroom_need_count(key->sdata);
 	}