[SCSI] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec.
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 893e56d..03e2050 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2343,8 +2343,7 @@
fstatus.ioctl_flags = pkt->fw_iotcl_flags;
fstatus.ioctl_data = pkt->dataword_r;
fstatus.adapid = pkt->adapid;
- fstatus.adapid_hi = pkt->adapid_hi;
- fstatus.reserved_2 = pkt->reserved_1;
+ fstatus.reserved_2 = pkt->dataword_r_extra;
fstatus.res_count = pkt->residuallen;
fstatus.status = pkt->status;
fstatus.seq_number = pkt->seq_no;
@@ -3262,7 +3261,9 @@
memset(&lcmd_pkt, 0, REQUEST_ENTRY_SIZE);
lcmd_pkt.handle = MAKE_HANDLE(req->id, sp->handle);
- lcmd_pkt.handle_hi = 0;
+ lcmd_pkt.reserved_0 = 0;
+ lcmd_pkt.port_path_ctrl = 0;
+ lcmd_pkt.reserved_1 = 0;
lcmd_pkt.dseg_count = cpu_to_le16(tot_dsds);
lcmd_pkt.tgt_idx = cpu_to_le16(sp->fcport->tgt_id);
@@ -3342,8 +3343,7 @@
tm_iocb.entry_type = TSK_MGMT_IOCB_TYPE_FX00;
tm_iocb.entry_count = 1;
tm_iocb.handle = cpu_to_le32(MAKE_HANDLE(req->id, sp->handle));
- tm_iocb.handle_hi = 0;
- tm_iocb.timeout = cpu_to_le16(qla2x00_get_async_timeout(vha) + 2);
+ tm_iocb.reserved_0 = 0;
tm_iocb.tgt_id = cpu_to_le16(sp->fcport->tgt_id);
tm_iocb.control_flags = cpu_to_le32(fxio->u.tmf.flags);
if (tm_iocb.control_flags == cpu_to_le32((uint32_t)TCF_LUN_RESET)) {
diff --git a/drivers/scsi/qla2xxx/qla_mr.h b/drivers/scsi/qla2xxx/qla_mr.h
index 1e60ca2..3cf5ddc 100644
--- a/drivers/scsi/qla2xxx/qla_mr.h
+++ b/drivers/scsi/qla2xxx/qla_mr.h
@@ -22,13 +22,16 @@
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
- uint32_t handle_hi;
+ uint8_t reserved_0;
+ uint8_t port_path_ctrl;
+ uint16_t reserved_1;
__le16 tgt_idx; /* Target Idx. */
uint16_t timeout; /* Command timeout. */
__le16 dseg_count; /* Data segment count. */
- uint16_t scsi_rsp_dsd_len;
+ uint8_t scsi_rsp_dsd_len;
+ uint8_t reserved_2;
struct scsi_lun lun; /* LUN (LE). */
@@ -55,7 +58,7 @@
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
- uint32_t handle_hi; /* System handle. */
+ uint32_t reserved_3; /* System handle. */
__le16 comp_status; /* Completion status. */
uint16_t reserved_0; /* OX_ID used by the firmware. */
@@ -78,7 +81,7 @@
struct multi_sts_entry_fx00 {
uint8_t entry_type; /* Entry type. */
- uint8_t sys_define; /* System defined. */
+ uint8_t entry_count; /* Entry count. */
uint8_t handle_count;
uint8_t entry_status;
@@ -94,15 +97,13 @@
__le32 handle; /* System handle. */
- uint32_t handle_hi; /* System handle. */
+ uint32_t reserved_0;
__le16 tgt_id; /* Target Idx. */
uint16_t reserved_1;
-
- uint16_t delay; /* Activity delay in seconds. */
-
- __le16 timeout; /* Command timeout. */
+ uint16_t reserved_3;
+ uint16_t reserved_4;
struct scsi_lun lun; /* LUN (LE). */
@@ -120,13 +121,13 @@
uint8_t entry_status; /* Entry Status. */
__le32 handle; /* System handle. */
- __le32 handle_hi; /* System handle. */
+ __le32 reserved_0;
__le16 tgt_id_sts; /* Completion status. */
__le16 options;
__le32 abort_handle; /* System handle. */
- __le32 abort_handle_hi; /* System handle. */
+ __le32 reserved_2;
__le16 req_que_no;
uint8_t reserved_1[38];
@@ -147,8 +148,7 @@
__le32 dataword_r; /* Data word returned */
uint32_t adapid; /* Adapter ID */
- uint32_t adapid_hi; /* Adapter ID high */
- uint32_t reserved_1;
+ uint32_t dataword_r_extra;
__le32 seq_no;
uint8_t reserved_2[20];