[SCSI] replace __FUNCTION__ with __func__
[jejb: fixed up a ton of missed conversions.
All of you are on notice this has happened, driver trees will now
need to be rebased]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: SCSI List <linux-scsi@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 4664331..ca55013 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -211,7 +211,7 @@
phy->asd_port = port;
}
ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
- __FUNCTION__, phy->asd_port->phy_mask, sas_phy->id);
+ __func__, phy->asd_port->phy_mask, sas_phy->id);
asd_update_port_links(asd_ha, phy);
spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
}
@@ -294,7 +294,7 @@
struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
GFP_ATOMIC);
if (!cp) {
- asd_printk("%s: out of memory\n", __FUNCTION__);
+ asd_printk("%s: out of memory\n", __func__);
goto out;
}
ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
@@ -446,7 +446,7 @@
struct domain_device *failed_dev = NULL;
ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
- __FUNCTION__, dl->status_block[3]);
+ __func__, dl->status_block[3]);
/*
* Find the task that caused the abort and abort it first.
@@ -474,7 +474,7 @@
if (!failed_dev) {
ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n",
- __FUNCTION__, tc_abort);
+ __func__, tc_abort);
goto out;
}
@@ -502,7 +502,7 @@
conn_handle = *((u16*)(&dl->status_block[1]));
conn_handle = le16_to_cpu(conn_handle);
- ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__,
+ ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __func__,
dl->status_block[3]);
/* Find the last pending task for the device... */
@@ -522,7 +522,7 @@
if (!last_dev_task) {
ASD_DPRINTK("%s: Device reset for idle device %d?\n",
- __FUNCTION__, conn_handle);
+ __func__, conn_handle);
goto out;
}
@@ -549,10 +549,10 @@
goto out;
}
case SIGNAL_NCQ_ERROR:
- ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__);
+ ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __func__);
goto out;
case CLEAR_NCQ_ERROR:
- ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__);
+ ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __func__);
goto out;
}
@@ -560,26 +560,26 @@
switch (sb_opcode) {
case BYTES_DMAED:
- ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+ ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __func__, phy_id);
asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
break;
case PRIMITIVE_RECVD:
- ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+ ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __func__,
phy_id);
asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
break;
case PHY_EVENT:
- ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+ ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __func__, phy_id);
asd_phy_event_tasklet(ascb, dl);
break;
case LINK_RESET_ERROR:
- ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+ ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __func__,
phy_id);
asd_link_reset_err_tasklet(ascb, dl, phy_id);
break;
case TIMER_EVENT:
ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
- __FUNCTION__, phy_id);
+ __func__, phy_id);
asd_turn_led(asd_ha, phy_id, 0);
/* the device is gone */
sas_phy_disconnected(sas_phy);
@@ -587,7 +587,7 @@
sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
break;
default:
- ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+ ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
phy_id, sb_opcode);
ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
edb, dl->opcode);
@@ -654,7 +654,7 @@
if (status != 0) {
ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
- __FUNCTION__, phy_id, status);
+ __func__, phy_id, status);
goto out;
}
@@ -663,7 +663,7 @@
asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
asd_turn_led(asd_ha, phy_id, 0);
asd_control_led(asd_ha, phy_id, 0);
- ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+ ASD_DPRINTK("%s: disable phy%d\n", __func__, phy_id);
break;
case ENABLE_PHY:
@@ -673,40 +673,40 @@
get_lrate_mode(phy, oob_mode);
asd_turn_led(asd_ha, phy_id, 1);
ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
- __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+ __func__, phy_id,phy->sas_phy.linkrate,
phy->sas_phy.iproto);
} else if (oob_status & CURRENT_SPINUP_HOLD) {
asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
asd_turn_led(asd_ha, phy_id, 1);
- ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+ ASD_DPRINTK("%s: phy%d, spinup hold\n", __func__,
phy_id);
} else if (oob_status & CURRENT_ERR_MASK) {
asd_turn_led(asd_ha, phy_id, 0);
ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
- __FUNCTION__, phy_id, oob_status);
+ __func__, phy_id, oob_status);
} else if (oob_status & (CURRENT_HOT_PLUG_CNCT
| CURRENT_DEVICE_PRESENT)) {
asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
asd_turn_led(asd_ha, phy_id, 1);
ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
- __FUNCTION__, phy_id);
+ __func__, phy_id);
} else {
asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
asd_turn_led(asd_ha, phy_id, 0);
ASD_DPRINTK("%s: phy%d: no device present: "
"oob_status:0x%x\n",
- __FUNCTION__, phy_id, oob_status);
+ __func__, phy_id, oob_status);
}
break;
case RELEASE_SPINUP_HOLD:
case PHY_NO_OP:
case EXECUTE_HARD_RESET:
- ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+ ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __func__,
phy_id, control_phy->sub_func);
/* XXX finish */
break;
default:
- ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+ ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __func__,
phy_id, control_phy->sub_func);
break;
}