ASoC: ssm2602: Split SPI and I2C code into different modules
There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
* We need to be extra careful to make sure to not build the driver into the
kernel if one of the subsystems is build as a module (Currently only I2C
can be build as a module).
* The module init path error handling is rather ugly. E.g. what should be
done if either the SPI or the I2C driver fails to register? Most drivers
that implement SPI and I2C in the same module currently fallback to
undefined behavior in that case. Splitting the the driver into two
modules, one for each bus allows the registration of the other bus driver
to continue without problems if one of them fails.
This patch splits the ssm2602 driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
While we are at it also cleanup the include section of the ssm2602 driver and
remove unneeded includes.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index 54f74f8..f9118dc 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -14,7 +14,8 @@
depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
select SND_BF5XX_SOC_I2S if !BF60x
select SND_BF6XX_SOC_I2S if BF60x
- select SND_SOC_SSM2602
+ select SND_SOC_SSM2602_SPI if SPI_MASTER
+ select SND_SOC_SSM2602_I2C if I2C
help
Say Y if you want to add support for the Analog Devices
SSM2602 Audio Codec Add-On Card.
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 983d087a..f17e6da 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -66,7 +66,8 @@
select SND_SOC_SN95031 if INTEL_SCU_IPC
select SND_SOC_SPDIF
select SND_SOC_SSM2518 if I2C
- select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_SSM2602_SPI if SPI_MASTER
+ select SND_SOC_SSM2602_I2C if I2C
select SND_SOC_STA32X if I2C
select SND_SOC_STA529 if I2C
select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
@@ -342,6 +343,14 @@
config SND_SOC_SSM2602
tristate
+config SND_SOC_SSM2602_SPI
+ select SND_SOC_SSM2602
+ tristate
+
+config SND_SOC_SSM2602_I2C
+ select SND_SOC_SSM2602
+ tristate
+
config SND_SOC_STA32X
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index bc12676..e7a2fb9 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -58,6 +58,8 @@
snd-soc-spdif-rx-objs := spdif_receiver.o
snd-soc-ssm2518-objs := ssm2518.o
snd-soc-ssm2602-objs := ssm2602.o
+snd-soc-ssm2602-spi-objs := ssm2602-spi.o
+snd-soc-ssm2602-i2c-objs := ssm2602-i2c.o
snd-soc-sta32x-objs := sta32x.o
snd-soc-sta529-objs := sta529.o
snd-soc-stac9766-objs := stac9766.o
@@ -188,6 +190,8 @@
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o
obj-$(CONFIG_SND_SOC_SSM2518) += snd-soc-ssm2518.o
obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o
+obj-$(CONFIG_SND_SOC_SSM2602_SPI) += snd-soc-ssm2602-spi.o
+obj-$(CONFIG_SND_SOC_SSM2602_I2C) += snd-soc-ssm2602-i2c.o
obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o
obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o
obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o
diff --git a/sound/soc/codecs/ssm2602-i2c.c b/sound/soc/codecs/ssm2602-i2c.c
new file mode 100644
index 0000000..abd63d5
--- /dev/null
+++ b/sound/soc/codecs/ssm2602-i2c.c
@@ -0,0 +1,57 @@
+/*
+ * SSM2602/SSM2603/SSM2604 I2C audio driver
+ *
+ * Copyright 2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <sound/soc.h>
+
+#include "ssm2602.h"
+
+/*
+ * ssm2602 2 wire address is determined by GPIO5
+ * state during powerup.
+ * low = 0x1a
+ * high = 0x1b
+ */
+static int ssm2602_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return ssm2602_probe(&client->dev, id->driver_data,
+ devm_regmap_init_i2c(client, &ssm2602_regmap_config));
+}
+
+static int ssm2602_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ return 0;
+}
+
+static const struct i2c_device_id ssm2602_i2c_id[] = {
+ { "ssm2602", SSM2602 },
+ { "ssm2603", SSM2602 },
+ { "ssm2604", SSM2604 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id);
+
+static struct i2c_driver ssm2602_i2c_driver = {
+ .driver = {
+ .name = "ssm2602",
+ .owner = THIS_MODULE,
+ },
+ .probe = ssm2602_i2c_probe,
+ .remove = ssm2602_i2c_remove,
+ .id_table = ssm2602_i2c_id,
+};
+module_i2c_driver(ssm2602_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC SSM2602/SSM2603/SSM2604 I2C driver");
+MODULE_AUTHOR("Cliff Cai");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ssm2602-spi.c b/sound/soc/codecs/ssm2602-spi.c
new file mode 100644
index 0000000..2bf55e2
--- /dev/null
+++ b/sound/soc/codecs/ssm2602-spi.c
@@ -0,0 +1,41 @@
+/*
+ * SSM2602 SPI audio driver
+ *
+ * Copyright 2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+
+#include <sound/soc.h>
+
+#include "ssm2602.h"
+
+static int ssm2602_spi_probe(struct spi_device *spi)
+{
+ return ssm2602_probe(&spi->dev, SSM2602,
+ devm_regmap_init_spi(spi, &ssm2602_regmap_config));
+}
+
+static int ssm2602_spi_remove(struct spi_device *spi)
+{
+ snd_soc_unregister_codec(&spi->dev);
+ return 0;
+}
+
+static struct spi_driver ssm2602_spi_driver = {
+ .driver = {
+ .name = "ssm2602",
+ .owner = THIS_MODULE,
+ },
+ .probe = ssm2602_spi_probe,
+ .remove = ssm2602_spi_remove,
+};
+module_spi_driver(ssm2602_spi_driver);
+
+MODULE_DESCRIPTION("ASoC SSM2602 SPI driver");
+MODULE_AUTHOR("Cliff Cai");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index f444d58..49d28ea 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -27,28 +27,16 @@
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
#include <linux/regmap.h>
#include <linux/slab.h>
-#include <sound/core.h>
+
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <sound/initval.h>
#include <sound/tlv.h>
#include "ssm2602.h"
-enum ssm2602_type {
- SSM2602,
- SSM2604,
-};
-
/* codec private data */
struct ssm2602_priv {
unsigned int sysclk;
@@ -529,7 +517,7 @@
return 0;
}
-static int ssm2602_probe(struct snd_soc_codec *codec)
+static int ssm2602_codec_probe(struct snd_soc_codec *codec)
{
struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = &codec->dapm;
@@ -554,7 +542,7 @@
ARRAY_SIZE(ssm2602_routes));
}
-static int ssm2604_probe(struct snd_soc_codec *codec)
+static int ssm2604_codec_probe(struct snd_soc_codec *codec)
{
struct snd_soc_dapm_context *dapm = &codec->dapm;
int ret;
@@ -568,7 +556,7 @@
ARRAY_SIZE(ssm2604_routes));
}
-static int ssm260x_probe(struct snd_soc_codec *codec)
+static int ssm260x_codec_probe(struct snd_soc_codec *codec)
{
struct ssm2602_priv *ssm2602 = snd_soc_codec_get_drvdata(codec);
int ret;
@@ -597,10 +585,10 @@
switch (ssm2602->type) {
case SSM2602:
- ret = ssm2602_probe(codec);
+ ret = ssm2602_codec_probe(codec);
break;
case SSM2604:
- ret = ssm2604_probe(codec);
+ ret = ssm2604_codec_probe(codec);
break;
}
@@ -620,7 +608,7 @@
}
static struct snd_soc_codec_driver soc_codec_dev_ssm2602 = {
- .probe = ssm260x_probe,
+ .probe = ssm260x_codec_probe,
.remove = ssm2602_remove,
.suspend = ssm2602_suspend,
.resume = ssm2602_resume,
@@ -639,7 +627,7 @@
return reg == SSM2602_RESET;
}
-static const struct regmap_config ssm2602_regmap_config = {
+const struct regmap_config ssm2602_regmap_config = {
.val_bits = 9,
.reg_bits = 7,
@@ -650,134 +638,28 @@
.reg_defaults_raw = ssm2602_reg,
.num_reg_defaults_raw = ARRAY_SIZE(ssm2602_reg),
};
+EXPORT_SYMBOL_GPL(ssm2602_regmap_config);
-#if defined(CONFIG_SPI_MASTER)
-static int ssm2602_spi_probe(struct spi_device *spi)
+int ssm2602_probe(struct device *dev, enum ssm2602_type type,
+ struct regmap *regmap)
{
struct ssm2602_priv *ssm2602;
- int ret;
- ssm2602 = devm_kzalloc(&spi->dev, sizeof(struct ssm2602_priv),
- GFP_KERNEL);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ssm2602 = devm_kzalloc(dev, sizeof(*ssm2602), GFP_KERNEL);
if (ssm2602 == NULL)
return -ENOMEM;
- spi_set_drvdata(spi, ssm2602);
+ dev_set_drvdata(dev, ssm2602);
ssm2602->type = SSM2602;
+ ssm2602->regmap = regmap;
- ssm2602->regmap = devm_regmap_init_spi(spi, &ssm2602_regmap_config);
- if (IS_ERR(ssm2602->regmap))
- return PTR_ERR(ssm2602->regmap);
-
- ret = snd_soc_register_codec(&spi->dev,
- &soc_codec_dev_ssm2602, &ssm2602_dai, 1);
- return ret;
+ return snd_soc_register_codec(dev, &soc_codec_dev_ssm2602,
+ &ssm2602_dai, 1);
}
-
-static int ssm2602_spi_remove(struct spi_device *spi)
-{
- snd_soc_unregister_codec(&spi->dev);
- return 0;
-}
-
-static struct spi_driver ssm2602_spi_driver = {
- .driver = {
- .name = "ssm2602",
- .owner = THIS_MODULE,
- },
- .probe = ssm2602_spi_probe,
- .remove = ssm2602_spi_remove,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_I2C)
-/*
- * ssm2602 2 wire address is determined by GPIO5
- * state during powerup.
- * low = 0x1a
- * high = 0x1b
- */
-static int ssm2602_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
-{
- struct ssm2602_priv *ssm2602;
- int ret;
-
- ssm2602 = devm_kzalloc(&i2c->dev, sizeof(struct ssm2602_priv),
- GFP_KERNEL);
- if (ssm2602 == NULL)
- return -ENOMEM;
-
- i2c_set_clientdata(i2c, ssm2602);
- ssm2602->type = id->driver_data;
-
- ssm2602->regmap = devm_regmap_init_i2c(i2c, &ssm2602_regmap_config);
- if (IS_ERR(ssm2602->regmap))
- return PTR_ERR(ssm2602->regmap);
-
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_ssm2602, &ssm2602_dai, 1);
- return ret;
-}
-
-static int ssm2602_i2c_remove(struct i2c_client *client)
-{
- snd_soc_unregister_codec(&client->dev);
- return 0;
-}
-
-static const struct i2c_device_id ssm2602_i2c_id[] = {
- { "ssm2602", SSM2602 },
- { "ssm2603", SSM2602 },
- { "ssm2604", SSM2604 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id);
-
-/* corgi i2c codec control layer */
-static struct i2c_driver ssm2602_i2c_driver = {
- .driver = {
- .name = "ssm2602",
- .owner = THIS_MODULE,
- },
- .probe = ssm2602_i2c_probe,
- .remove = ssm2602_i2c_remove,
- .id_table = ssm2602_i2c_id,
-};
-#endif
-
-
-static int __init ssm2602_modinit(void)
-{
- int ret = 0;
-
-#if defined(CONFIG_SPI_MASTER)
- ret = spi_register_driver(&ssm2602_spi_driver);
- if (ret)
- return ret;
-#endif
-
-#if IS_ENABLED(CONFIG_I2C)
- ret = i2c_add_driver(&ssm2602_i2c_driver);
- if (ret)
- return ret;
-#endif
-
- return ret;
-}
-module_init(ssm2602_modinit);
-
-static void __exit ssm2602_exit(void)
-{
-#if defined(CONFIG_SPI_MASTER)
- spi_unregister_driver(&ssm2602_spi_driver);
-#endif
-
-#if IS_ENABLED(CONFIG_I2C)
- i2c_del_driver(&ssm2602_i2c_driver);
-#endif
-}
-module_exit(ssm2602_exit);
+EXPORT_SYMBOL_GPL(ssm2602_probe);
MODULE_DESCRIPTION("ASoC SSM2602/SSM2603/SSM2604 driver");
MODULE_AUTHOR("Cliff Cai");
diff --git a/sound/soc/codecs/ssm2602.h b/sound/soc/codecs/ssm2602.h
index fbd07d7..7475388 100644
--- a/sound/soc/codecs/ssm2602.h
+++ b/sound/soc/codecs/ssm2602.h
@@ -28,6 +28,20 @@
#ifndef _SSM2602_H
#define _SSM2602_H
+#include <linux/regmap.h>
+
+struct device;
+
+enum ssm2602_type {
+ SSM2602,
+ SSM2604,
+};
+
+extern const struct regmap_config ssm2602_regmap_config;
+
+int ssm2602_probe(struct device *dev, enum ssm2602_type type,
+ struct regmap *regmap);
+
/* SSM2602 Codec Register definitions */
#define SSM2602_LINVOL 0x00