serial: amba-pl011: factor out code for writing LCR_H register
The code to cope with a split tx/rx LCR_H register is non-trivial
so put it into it's own function to avoid duplication.
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index a576a5b..844bfba9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1511,6 +1511,21 @@
return retval;
}
+static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+{
+ writew(lcr_h, uap->port.membase + uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+ }
+}
+
static int pl011_startup(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1541,17 +1556,7 @@
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
writew(1, uap->port.membase + UART011_IBRD);
- writew(0, uap->port.membase + uap->lcrh_rx);
- if (uap->lcrh_tx != uap->lcrh_rx) {
- int i;
- /*
- * Wait 10 PCLKs before writing LCRH_TX register,
- * to get this delay write read only register 10 times
- */
- for (i = 0; i < 10; ++i)
- writew(0xff, uap->port.membase + UART011_MIS);
- writew(0, uap->port.membase + uap->lcrh_tx);
- }
+ pl011_write_lcr_h(uap, 0);
writew(0, uap->port.membase + UART01x_DR);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
barrier();
@@ -1801,17 +1806,7 @@
* UART011_FBRD & UART011_IBRD.
* ----------^----------^----------^----------^-----
*/
- writew(lcr_h, port->membase + uap->lcrh_rx);
- if (uap->lcrh_rx != uap->lcrh_tx) {
- int i;
- /*
- * Wait 10 PCLKs before writing LCRH_TX register,
- * to get this delay write read only register 10 times
- */
- for (i = 0; i < 10; ++i)
- writew(0xff, uap->port.membase + UART011_MIS);
- writew(lcr_h, port->membase + uap->lcrh_tx);
- }
+ pl011_write_lcr_h(uap, lcr_h);
writew(old_cr, port->membase + UART011_CR);
spin_unlock_irqrestore(&port->lock, flags);