i386: prepare shared kernel/vmlinux.lds.S

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
index 7d72cce..849ee61 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -1,213 +1,5 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- *
- * Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-
-/* Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-#define LOAD_OFFSET __PAGE_OFFSET
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/boot.h>
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(phys_startup_32)
-jiffies = jiffies_64;
-
-PHDRS {
-	text PT_LOAD FLAGS(5);	/* R_E */
-	data PT_LOAD FLAGS(7);	/* RWE */
-	note PT_NOTE FLAGS(0);	/* ___ */
-}
-SECTIONS
-{
-  . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
-  phys_startup_32 = startup_32 - LOAD_OFFSET;
-
-  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-  	_text = .;			/* Text and read-only data */
-	*(.text.head)
-  } :text = 0x9090
-
-  /* read-only */
-  .text : AT(ADDR(.text) - LOAD_OFFSET) {
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	KPROBES_TEXT
-	*(.fixup)
-	*(.gnu.warning)
-  	_etext = .;			/* End of text section */
-  } :text = 0x9090
-
-  . = ALIGN(16);		/* Exception table */
-  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-  	__start___ex_table = .;
-	 *(__ex_table)
-  	__stop___ex_table = .;
-  }
-
-  NOTES :text :note
-
-  BUG_TABLE :text
-
-  . = ALIGN(4);
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-  	__tracedata_start = .;
-	*(.tracedata)
-  	__tracedata_end = .;
-  }
-
-  RODATA
-
-  /* writeable */
-  . = ALIGN(4096);
-  .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	} :data
-
-  . = ALIGN(4096);
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-  	__nosave_begin = .;
-	*(.data.nosave)
-  	. = ALIGN(4096);
-  	__nosave_end = .;
-  }
-
-  . = ALIGN(4096);
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-	*(.data.page_aligned)
-	*(.data.idt)
-  }
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-	*(.data.cacheline_aligned)
-  }
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-	*(.data.read_mostly)
-	_edata = .;		/* End of data section */
-  }
-
-  . = ALIGN(THREAD_SIZE);	/* init_task */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-	*(.data.init_task)
-  }
-
-  /* might get freed after init */
-  . = ALIGN(4096);
-  .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-  	__smp_locks = .;
-	*(.smp_locks)
-	__smp_locks_end = .;
-  }
-  /* will be freed after init
-   * Following ALIGN() is required to make sure no other data falls on the
-   * same page where __smp_alt_end is pointing as that page might be freed
-   * after boot. Always make sure that ALIGN() directive is present after
-   * the section which contains __smp_alt_end.
-   */
-  . = ALIGN(4096);
-
-  /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
-  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-  	__init_begin = .;
-	_sinittext = .;
-	*(.init.text)
-	_einittext = .;
-  }
-  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
-  . = ALIGN(16);
-  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-  	__setup_start = .;
-	*(.init.setup)
-  	__setup_end = .;
-   }
-  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-  	__initcall_start = .;
-	INITCALLS
-  	__initcall_end = .;
-  }
-  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-  	__con_initcall_start = .;
-	*(.con_initcall.init)
-  	__con_initcall_end = .;
-  }
-  SECURITY_INIT
-  . = ALIGN(4);
-  .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
-  	__alt_instructions = .;
-	*(.altinstructions)
-	__alt_instructions_end = .;
-  }
-  .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
-	*(.altinstr_replacement)
-  }
-  . = ALIGN(4);
-  .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
-  	__parainstructions = .;
-	*(.parainstructions)
-  	__parainstructions_end = .;
-  }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
-  .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
-#if defined(CONFIG_BLK_DEV_INITRD)
-  . = ALIGN(4096);
-  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
-  }
+#ifdef CONFIG_X86_32
+# include "vmlinux_32.lds.S"
+#else
+# include "vmlinux_64.lds.S"
 #endif
-  . = ALIGN(4096);
-  .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
-	__per_cpu_start = .;
-	*(.data.percpu)
-	*(.data.percpu.shared_aligned)
-	__per_cpu_end = .;
-  }
-  . = ALIGN(4096);
-  /* freed after init ends here */
-	
-  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-	__init_end = .;
-	__bss_start = .;		/* BSS */
-	*(.bss.page_aligned)
-	*(.bss)
-	. = ALIGN(4);
-	__bss_stop = .;
-  	_end = . ;
-	/* This is where the kernel creates the early boot page tables */
-	. = ALIGN(4096);
-	pg0 = . ;
-  }
-
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	*(.exitcall.exit)
-	}
-
-  STABS_DEBUG
-
-  DWARF_DEBUG
-}