diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 2e1c237..7ca2ff9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -35,6 +35,7 @@
 #include <linux/phy.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
+#include <linux/mdio.h>
 
 #include <linux/atomic.h>
 #include <asm/io.h>
@@ -967,3 +968,283 @@
 
 	schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
 }
+
+static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+				    int addr)
+{
+	/* Write the desired MMD Devad */
+	bus->write(bus, addr, MII_MMD_CTRL, devad);
+
+	/* Write the desired MMD register address */
+	bus->write(bus, addr, MII_MMD_DATA, prtad);
+
+	/* Select the Function : DATA with no post increment */
+	bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd_indirect - reads data from the MMD registers
+ * @bus: the target MII bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: it reads data from the MMD registers (clause 22 to access to
+ * clause 45) of the specified phy address.
+ * To read these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Read  reg 14 // Read MMD data
+ */
+static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
+				 int addr)
+{
+	u32 ret;
+
+	mmd_phy_indirect(bus, prtad, devad, addr);
+
+	/* Read the content of the MMD's selected register */
+	ret = bus->read(bus, addr, MII_MMD_DATA);
+
+	return ret;
+}
+
+/**
+ * phy_write_mmd_indirect - writes data to the MMD registers
+ * @bus: the target MII bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Write data from the MMD registers of the specified
+ * phy address.
+ * To write these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Write reg 14 // Write MMD data
+ */
+static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
+				   int addr, u32 data)
+{
+	mmd_phy_indirect(bus, prtad, devad, addr);
+
+	/* Write the data into MMD's selected register */
+	bus->write(bus, addr, MII_MMD_DATA, data);
+}
+
+static u32 phy_eee_to_adv(u16 eee_adv)
+{
+	u32 adv = 0;
+
+	if (eee_adv & MDIO_EEE_100TX)
+		adv |= ADVERTISED_100baseT_Full;
+	if (eee_adv & MDIO_EEE_1000T)
+		adv |= ADVERTISED_1000baseT_Full;
+	if (eee_adv & MDIO_EEE_10GT)
+		adv |= ADVERTISED_10000baseT_Full;
+	if (eee_adv & MDIO_EEE_1000KX)
+		adv |= ADVERTISED_1000baseKX_Full;
+	if (eee_adv & MDIO_EEE_10GKX4)
+		adv |= ADVERTISED_10000baseKX4_Full;
+	if (eee_adv & MDIO_EEE_10GKR)
+		adv |= ADVERTISED_10000baseKR_Full;
+
+	return adv;
+}
+
+static u32 phy_eee_to_supported(u16 eee_caported)
+{
+	u32 supported = 0;
+
+	if (eee_caported & MDIO_EEE_100TX)
+		supported |= SUPPORTED_100baseT_Full;
+	if (eee_caported & MDIO_EEE_1000T)
+		supported |= SUPPORTED_1000baseT_Full;
+	if (eee_caported & MDIO_EEE_10GT)
+		supported |= SUPPORTED_10000baseT_Full;
+	if (eee_caported & MDIO_EEE_1000KX)
+		supported |= SUPPORTED_1000baseKX_Full;
+	if (eee_caported & MDIO_EEE_10GKX4)
+		supported |= SUPPORTED_10000baseKX4_Full;
+	if (eee_caported & MDIO_EEE_10GKR)
+		supported |= SUPPORTED_10000baseKR_Full;
+
+	return supported;
+}
+
+static u16 phy_adv_to_eee(u32 adv)
+{
+	u16 reg = 0;
+
+	if (adv & ADVERTISED_100baseT_Full)
+		reg |= MDIO_EEE_100TX;
+	if (adv & ADVERTISED_1000baseT_Full)
+		reg |= MDIO_EEE_1000T;
+	if (adv & ADVERTISED_10000baseT_Full)
+		reg |= MDIO_EEE_10GT;
+	if (adv & ADVERTISED_1000baseKX_Full)
+		reg |= MDIO_EEE_1000KX;
+	if (adv & ADVERTISED_10000baseKX4_Full)
+		reg |= MDIO_EEE_10GKX4;
+	if (adv & ADVERTISED_10000baseKR_Full)
+		reg |= MDIO_EEE_10GKR;
+
+	return reg;
+}
+
+/**
+ * phy_init_eee - init and check the EEE feature
+ * @phydev: target phy_device struct
+ * @clk_stop_enable: PHY may stop the clock during LPI
+ *
+ * Description: it checks if the Energy-Efficient Ethernet (EEE)
+ * is supported by looking at the MMD registers 3.20 and 7.60/61
+ * and it programs the MMD register 3.0 setting the "Clock stop enable"
+ * bit if required.
+ */
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
+{
+	int ret = -EPROTONOSUPPORT;
+
+	/* According to 802.3az,the EEE is supported only in full duplex-mode.
+	 * Also EEE feature is active when core is operating with MII, GMII
+	 * or RGMII.
+	 */
+	if ((phydev->duplex == DUPLEX_FULL) &&
+	    ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
+	    (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
+	    (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+		int eee_lp, eee_cap, eee_adv;
+		u32 lp, cap, adv;
+		int idx, status;
+
+		/* Read phy status to properly get the right settings */
+		status = phy_read_status(phydev);
+		if (status)
+			return status;
+
+		/* First check if the EEE ability is supported */
+		eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
+						MDIO_MMD_PCS, phydev->addr);
+		if (eee_cap < 0)
+			return eee_cap;
+
+		cap = phy_eee_to_supported(eee_cap);
+		if (!cap)
+			goto eee_exit;
+
+		/* Check which link settings negotiated and verify it in
+		 * the EEE advertising registers.
+		 */
+		eee_lp = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
+					       MDIO_MMD_AN, phydev->addr);
+		if (eee_lp < 0)
+			return eee_lp;
+
+		eee_adv = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
+						MDIO_MMD_AN, phydev->addr);
+		if (eee_adv < 0)
+			return eee_adv;
+
+		adv = phy_eee_to_adv(eee_adv);
+		lp = phy_eee_to_adv(eee_lp);
+		idx = phy_find_setting(phydev->speed, phydev->duplex);
+		if ((lp & adv & settings[idx].setting))
+			goto eee_exit;
+
+		if (clk_stop_enable) {
+			/* Configure the PHY to stop receiving xMII
+			 * clock while it is signaling LPI.
+			 */
+			int val = phy_read_mmd_indirect(phydev->bus, MDIO_CTRL1,
+							MDIO_MMD_PCS,
+							phydev->addr);
+			if (val < 0)
+				return val;
+
+			val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
+			phy_write_mmd_indirect(phydev->bus, MDIO_CTRL1,
+					       MDIO_MMD_PCS, phydev->addr, val);
+		}
+
+		ret = 0; /* EEE supported */
+	}
+
+eee_exit:
+	return ret;
+}
+EXPORT_SYMBOL(phy_init_eee);
+
+/**
+ * phy_get_eee_err - report the EEE wake error count
+ * @phydev: target phy_device struct
+ *
+ * Description: it is to report the number of time where the PHY
+ * failed to complete its normal wake sequence.
+ */
+int phy_get_eee_err(struct phy_device *phydev)
+{
+	return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
+				     MDIO_MMD_PCS, phydev->addr);
+
+}
+EXPORT_SYMBOL(phy_get_eee_err);
+
+/**
+ * phy_ethtool_get_eee - get EEE supported and status
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it reportes the Supported/Advertisement/LP Advertisement
+ * capabilities.
+ */
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+	int val;
+
+	/* Get Supported EEE */
+	val = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
+				    MDIO_MMD_PCS, phydev->addr);
+	if (val < 0)
+		return val;
+	data->supported = phy_eee_to_supported(val);
+
+	/* Get advertisement EEE */
+	val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+	data->advertised = phy_eee_to_adv(val);
+
+	/* Get LP advertisement EEE */
+	val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+	data->lp_advertised = phy_eee_to_adv(val);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_eee);
+
+/**
+ * phy_ethtool_set_eee - set EEE supported and status
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it is to program the Advertisement EEE register.
+ */
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+	int val;
+
+	val = phy_adv_to_eee(data->advertised);
+	phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
+			       phydev->addr, val);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_set_eee);
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index dfb9479..7cccafe 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -43,7 +43,11 @@
 #define MDIO_PKGID2		15
 #define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
 #define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
 #define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
 
 /* Media-dependent registers. */
 #define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
@@ -56,7 +60,6 @@
 #define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
 #define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
 #define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
-#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
 
 /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
 #define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
@@ -82,6 +85,7 @@
 #define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
 #define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
 #define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
 
 /* 10 Gb/s */
 #define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
@@ -237,9 +241,25 @@
 #define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
 #define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
 
-/* AN EEE Advertisement register. */
-#define MDIO_AN_EEE_ADV_100TX		0x0002	/* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T		0x0004	/* Advertise 1000T EEE cap */
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
+/* Note: the two defines above can be potentially used by the user-land
+ * and cannot remove them now.
+ * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
+ * using the previous ones (that can be considered obsolete).
+ */
+#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
+#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
+#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
+#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
 
 /* LASI RX_ALARM control/status registers. */
 #define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 2783eca..8ef3a7a 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -21,6 +21,8 @@
 #define MII_EXPANSION		0x06	/* Expansion register          */
 #define MII_CTRL1000		0x09	/* 1000BASE-T control          */
 #define MII_STAT1000		0x0a	/* 1000BASE-T status           */
+#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
+#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
 #define MII_ESTATUS		0x0f	/* Extended Status             */
 #define MII_DCOUNTER		0x12	/* Disconnect counter          */
 #define MII_FCSCOUNTER		0x13	/* False carrier counter       */
@@ -141,6 +143,13 @@
 #define FLOW_CTRL_TX		0x01
 #define FLOW_CTRL_RX		0x02
 
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
+#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
+
 /* This structure is used in all SIOCxMIIxxx ioctl calls */
 struct mii_ioctl_data {
 	__u16		phy_id;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7eac80a..c35299e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -554,6 +554,11 @@
 		int (*run)(struct phy_device *));
 int phy_scan_fixups(struct phy_device *phydev);
 
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
+int phy_get_eee_err(struct phy_device *phydev);
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
+
 int __init mdio_bus_init(void);
 void mdio_bus_exit(void);