diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 87851ef..d1cd5f9 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -120,6 +120,13 @@
 
 ---------------------------
 
+What:  drivers depending on OSS_OBSOLETE_DRIVER
+When:  options in 2.6.20, code in 2.6.22
+Why:   OSS drivers with ALSA replacements
+Who:   Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
 What:	pci_module_init(driver)
 When:	January 2007
 Why:	Is replaced by pci_register_driver(pci_driver).
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b50595a..7947ced 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1183,6 +1183,8 @@
 				Mechanism 2.
 		nommconf	[IA-32,X86_64] Disable use of MMCONFIG for PCI
 				Configuration
+		mmconf		[IA-32,X86_64] Force MMCONFIG. This is useful
+				to override the builtin blacklist.
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
 				disable the use of MSI interrupts system-wide.
diff --git a/Documentation/networking/LICENSE.qla3xxx b/Documentation/networking/LICENSE.qla3xxx
new file mode 100644
index 0000000..2f2077e
--- /dev/null
+++ b/Documentation/networking/LICENSE.qla3xxx
@@ -0,0 +1,46 @@
+Copyright (c)  2003-2006 QLogic Corporation
+QLogic Linux Networking HBA Driver
+
+This program includes a device driver for Linux 2.6 that may be
+distributed with QLogic hardware specific firmware binary file.
+You may modify and redistribute the device driver code under the
+GNU General Public License as published by the Free Software
+Foundation (version 2 or a later version).
+
+You may redistribute the hardware specific firmware binary file
+under the following terms:
+
+	1. Redistribution of source code (only if applicable),
+	   must retain the above copyright notice, this list of
+	   conditions and the following disclaimer.
+
+	2. Redistribution in binary form must reproduce the above
+	   copyright notice, this list of conditions and the
+	   following disclaimer in the documentation and/or other
+	   materials provided with the distribution.
+
+	3. The name of QLogic Corporation may not be used to
+	   endorse or promote products derived from this software
+	   without specific prior written permission
+
+REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
+THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
+CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
+OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
+TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
+ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
+COMBINATION WITH THIS PROGRAM.
+
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8c48b8a..5c0ba23 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1136,10 +1136,10 @@
    Devices connected to openPIC-compatible controllers should encode
    sense and polarity as follows:
 
-	0 = high to low edge sensitive type enabled
+	0 = low to high edge sensitive type enabled
 	1 = active low level sensitive type enabled
-	2 = low to high edge sensitive type enabled
-	3 = active high level sensitive type enabled
+	2 = active high level sensitive type enabled
+	3 = high to low edge sensitive type enabled
 
    ISA PIC interrupt controllers should adhere to the ISA PIC
    encodings listed below:
diff --git a/MAINTAINERS b/MAINTAINERS
index 3356124..5627750 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2366,6 +2366,12 @@
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 
+QLOGIC QLA3XXX NETWORK DRIVER
+P:	Ron Mercer
+M:	linux-driver@qlogic.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 QNX4 FILESYSTEM
 P:	Anders Larsen
 M:	al@alarsen.net
@@ -3308,10 +3314,11 @@
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
+P:	Tim Shimmin, David Chatterton
 M:	xfs-masters@oss.sgi.com
-M:	nathans@sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
+T:	git git://oss.sgi.com:8090/xfs/xfs-2.6
 S:	Supported
 
 X86 3-LEVEL PAGING (PAE) SUPPORT
diff --git a/Makefile b/Makefile
index 33559b5..c9ed7b4 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 3594155..cf3fa5c 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -621,9 +621,8 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -956,10 +955,42 @@
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
 CONFIG_MMC_AT91RM9200=y
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_AT91=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 2585545..cc92a7b 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -60,7 +60,7 @@
 static kmem_cache_t *dma_kmem;
 
 /* dma channel state information */
-s3c2410_dma_chan_t s3c2410_chans[S3C2410_DMA_CHANNELS];
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -74,7 +74,7 @@
 #define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
 #else
 static inline void
-dma_wrreg(s3c2410_dma_chan_t *chan, int reg, unsigned long val)
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
 {
 	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
 	writel(val, dma_regaddr(chan, reg));
@@ -102,7 +102,7 @@
 */
 
 static void
-dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs)
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
 {
 	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
 	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
@@ -112,7 +112,7 @@
 }
 
 static void
-dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
 		 struct s3c2410_dma_regstate *regs)
 {
 	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
@@ -122,7 +122,7 @@
 }
 
 static void
-dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan)
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
 {
 	struct s3c2410_dma_regstate state;
 
@@ -136,7 +136,7 @@
 }
 
 static void
-dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan)
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 {
 	struct s3c2410_dma_regstate state;
 
@@ -164,7 +164,7 @@
 */
 
 static void
-s3c2410_dma_stats_timeout(s3c2410_dma_stats_t *stats, int val)
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
 {
 	if (stats == NULL)
 		return;
@@ -183,7 +183,7 @@
 */
 
 static int
-s3c2410_dma_waitforload(s3c2410_dma_chan_t *chan, int line)
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 {
 	int timeout = chan->load_timeout;
 	int took;
@@ -230,8 +230,8 @@
 */
 
 static inline int
-s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan,
-		       s3c2410_dma_buf_t *buf)
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+		       struct s3c2410_dma_buf *buf)
 {
 	unsigned long reload;
 
@@ -304,7 +304,7 @@
 */
 
 static void
-s3c2410_dma_call_op(s3c2410_dma_chan_t *chan, s3c2410_chan_op_t op)
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
 {
 	if (chan->op_fn != NULL) {
 		(chan->op_fn)(chan, op);
@@ -318,8 +318,8 @@
 */
 
 static inline void
-s3c2410_dma_buffdone(s3c2410_dma_chan_t *chan, s3c2410_dma_buf_t *buf,
-		     s3c2410_dma_buffresult_t result)
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+		     enum s3c2410_dma_buffresult result)
 {
 	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
 		 chan->callback_fn, buf, buf->id, buf->size, result);
@@ -334,7 +334,7 @@
  * start a dma channel going
 */
 
-static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
 {
 	unsigned long tmp;
 	unsigned long flags;
@@ -430,7 +430,7 @@
 */
 
 static int
-s3c2410_dma_canload(s3c2410_dma_chan_t *chan)
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 {
 	if (chan->load_state == S3C2410_DMALOAD_NONE ||
 	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
@@ -460,8 +460,8 @@
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
-	s3c2410_dma_buf_t *buf;
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
 	check_channel(channel);
@@ -540,7 +540,7 @@
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 static inline void
-s3c2410_dma_freebuf(s3c2410_dma_buf_t *buf)
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
 {
 	int magicok = (buf->magic == BUF_MAGIC);
 
@@ -560,7 +560,7 @@
 */
 
 static inline void
-s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
 {
 	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
 		 chan->number, chan->load_state);
@@ -601,8 +601,8 @@
 static irqreturn_t
 s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
 {
-	s3c2410_dma_chan_t *chan = (s3c2410_dma_chan_t *)devpw;
-	s3c2410_dma_buf_t  *buf;
+	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+	struct s3c2410_dma_buf  *buf;
 
 	buf = chan->curr;
 
@@ -731,10 +731,10 @@
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client,
+int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client,
 			void *dev)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 	unsigned long flags;
 	int err;
 
@@ -807,9 +807,9 @@
  * allowed to go through.
 */
 
-int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 	unsigned long flags;
 
 	check_channel(channel);
@@ -846,7 +846,7 @@
 
 EXPORT_SYMBOL(s3c2410_dma_free);
 
-static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
 {
 	unsigned long tmp;
 	unsigned long flags;
@@ -880,7 +880,7 @@
 	return 0;
 }
 
-void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan)
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
 {
 	unsigned long tmp;
 	unsigned int timeout = 0x10000;
@@ -901,9 +901,9 @@
  * stop the channel, and remove all current and pending transfers
 */
 
-static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
 {
-	s3c2410_dma_buf_t *buf, *next;
+	struct s3c2410_dma_buf *buf, *next;
 	unsigned long flags;
 
 	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
@@ -958,7 +958,7 @@
 }
 
 int
-s3c2410_dma_started(s3c2410_dma_chan_t *chan)
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 {
 	unsigned long flags;
 
@@ -995,9 +995,9 @@
 }
 
 int
-s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op)
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1046,7 +1046,7 @@
 		       int xferunit,
 		       int dcon)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __FUNCTION__, channel, xferunit, dcon);
@@ -1086,7 +1086,7 @@
 
 int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1106,7 +1106,7 @@
 
 int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1121,7 +1121,7 @@
 
 int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1149,11 +1149,11 @@
 */
 
 int s3c2410_dma_devconfig(int channel,
-			  s3c2410_dmasrc_t source,
+			  enum s3c2410_dmasrc source,
 			  int hwcfg,
 			  unsigned long devaddr)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1200,7 +1200,7 @@
 
 int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+ 	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
  	check_channel(channel);
 
@@ -1222,7 +1222,7 @@
 
 static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
 {
-	s3c2410_dma_chan_t *cp = container_of(dev, s3c2410_dma_chan_t, dev);
+	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
 
 	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
 
@@ -1262,7 +1262,7 @@
 
 static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
 {
-	memset(p, 0, sizeof(s3c2410_dma_buf_t));
+	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
 
 
@@ -1270,7 +1270,7 @@
 
 static int __init s3c2410_init_dma(void)
 {
-	s3c2410_dma_chan_t *cp;
+	struct s3c2410_dma_chan *cp;
 	int channel;
 	int ret;
 
@@ -1288,7 +1288,7 @@
 		goto err;
 	}
 
-	dma_kmem = kmem_cache_create("dma_desc", sizeof(s3c2410_dma_buf_t), 0,
+	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
 				     SLAB_HWCACHE_ALIGN,
 				     s3c2410_dma_cache_ctor, NULL);
 
@@ -1301,7 +1301,7 @@
 	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
 		cp = &s3c2410_chans[channel];
 
-		memset(cp, 0, sizeof(s3c2410_dma_chan_t));
+		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
 
 		/* dma channel irqs are in order.. */
 		cp->number = channel;
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index b103e56..d438ce4 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -87,6 +87,32 @@
 	if (cache_is_vipt_aliasing())
 		flush_pfn_alias(pfn, user_addr);
 }
+
+void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr,
+			 unsigned long len, int write)
+{
+	if (cache_is_vivt()) {
+		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+			unsigned long addr = (unsigned long)kaddr;
+			__cpuc_coherent_kern_range(addr, addr + len);
+		}
+		return;
+	}
+
+	if (cache_is_vipt_aliasing()) {
+		flush_pfn_alias(page_to_pfn(page), uaddr);
+		return;
+	}
+
+	/* VIPT non-aliasing cache */
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+	    vma->vm_flags | VM_EXEC) {
+		unsigned long addr = (unsigned long)kaddr;
+		/* only flushing the kernel mapping on non-aliasing VIPT */
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
 #else
 #define flush_pfn_alias(pfn,vaddr)	do { } while (0)
 #endif
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 5fbdf81a..96fdf30 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -156,7 +156,7 @@
 };
 
 extern s32 vfp_get_float(unsigned int reg);
-extern void vfp_put_float(unsigned int reg, s32 val);
+extern void vfp_put_float(s32 val, unsigned int reg);
 
 /*
  * VFP_SINGLE_MANTISSA_BITS - number of bits in the mantissa
@@ -267,7 +267,7 @@
  */
 #define VFP_REG_ZERO	16
 extern u64 vfp_get_double(unsigned int reg);
-extern void vfp_put_double(unsigned int reg, u64 val);
+extern void vfp_put_double(u64 val, unsigned int reg);
 
 #define VFP_DOUBLE_MANTISSA_BITS	(52)
 #define VFP_DOUBLE_EXPONENT_BITS	(11)
@@ -341,12 +341,6 @@
 
 u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exceptions, const char *func);
 
-/*
- * System registers
- */
-extern u32 vfp_get_sys(unsigned int reg);
-extern void vfp_put_sys(unsigned int reg, u32 val);
-
 u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
 
 /*
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index 04bd342..add48e3 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -195,7 +195,7 @@
 		s64 d = vfp_double_pack(vd);
 		pr_debug("VFP: %s: d(d%d)=%016llx exceptions=%08x\n", func,
 			 dd, d, exceptions);
-		vfp_put_double(dd, d);
+		vfp_put_double(d, dd);
 	}
 	return exceptions;
 }
@@ -250,19 +250,19 @@
  */
 static u32 vfp_double_fabs(int dd, int unused, int dm, u32 fpscr)
 {
-	vfp_put_double(dd, vfp_double_packed_abs(vfp_get_double(dm)));
+	vfp_put_double(vfp_double_packed_abs(vfp_get_double(dm)), dd);
 	return 0;
 }
 
 static u32 vfp_double_fcpy(int dd, int unused, int dm, u32 fpscr)
 {
-	vfp_put_double(dd, vfp_get_double(dm));
+	vfp_put_double(vfp_get_double(dm), dd);
 	return 0;
 }
 
 static u32 vfp_double_fneg(int dd, int unused, int dm, u32 fpscr)
 {
-	vfp_put_double(dd, vfp_double_packed_negate(vfp_get_double(dm)));
+	vfp_put_double(vfp_double_packed_negate(vfp_get_double(dm)), dd);
 	return 0;
 }
 
@@ -287,7 +287,7 @@
 			vdp = &vfp_double_default_qnan;
 			ret = FPSCR_IOC;
 		}
-		vfp_put_double(dd, vfp_double_pack(vdp));
+		vfp_put_double(vfp_double_pack(vdp), dd);
 		return ret;
 	}
 
@@ -476,7 +476,7 @@
 	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fcvts");
 
  pack_nan:
-	vfp_put_float(sd, vfp_single_pack(&vsd));
+	vfp_put_float(vfp_single_pack(&vsd), sd);
 	return exceptions;
 }
 
@@ -573,7 +573,7 @@
 
 	pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, d);
+	vfp_put_float(d, sd);
 
 	return exceptions;
 }
@@ -648,7 +648,7 @@
 
 	pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, (s32)d);
+	vfp_put_float((s32)d, sd);
 
 	return exceptions;
 }
@@ -1084,7 +1084,7 @@
  vdn_nan:
 	exceptions = vfp_propagate_nan(&vdd, &vdn, &vdm, fpscr);
  pack:
-	vfp_put_double(dd, vfp_double_pack(&vdd));
+	vfp_put_double(vfp_double_pack(&vdd), dd);
 	return exceptions;
 
  vdm_nan:
@@ -1104,7 +1104,7 @@
 	goto pack;
 
  invalid:
-	vfp_put_double(dd, vfp_double_pack(&vfp_double_default_qnan));
+	vfp_put_double(vfp_double_pack(&vfp_double_default_qnan), dd);
 	return FPSCR_IOC;
 }
 
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index eb683cd..e51e667 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -178,12 +178,12 @@
 
 	.globl	vfp_put_float
 vfp_put_float:
-	add	pc, pc, r0, lsl #3
+	add	pc, pc, r1, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r1, c\dr, c0, 0	@ fmsr	r0, s0
+	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r1, c\dr, c0, 4	@ fmsr	r0, s1
+	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
 	.endr
 
@@ -203,9 +203,9 @@
 
 	.globl	vfp_put_double
 vfp_put_double:
-	add	pc, pc, r0, lsl #3
+	add	pc, pc, r2, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmdrr	d\dr, r1, r2
+	fmdrr	d\dr, r0, r1
 	mov	pc, lr
 	.endr
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 78d7cac..8f6c179 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -200,7 +200,7 @@
 		s32 d = vfp_single_pack(vs);
 		pr_debug("VFP: %s: d(s%d)=%08x exceptions=%08x\n", func,
 			 sd, d, exceptions);
-		vfp_put_float(sd, d);
+		vfp_put_float(d, sd);
 	}
 
 	return exceptions;
@@ -257,19 +257,19 @@
  */
 static u32 vfp_single_fabs(int sd, int unused, s32 m, u32 fpscr)
 {
-	vfp_put_float(sd, vfp_single_packed_abs(m));
+	vfp_put_float(vfp_single_packed_abs(m), sd);
 	return 0;
 }
 
 static u32 vfp_single_fcpy(int sd, int unused, s32 m, u32 fpscr)
 {
-	vfp_put_float(sd, m);
+	vfp_put_float(m, sd);
 	return 0;
 }
 
 static u32 vfp_single_fneg(int sd, int unused, s32 m, u32 fpscr)
 {
-	vfp_put_float(sd, vfp_single_packed_negate(m));
+	vfp_put_float(vfp_single_packed_negate(m), sd);
 	return 0;
 }
 
@@ -333,7 +333,7 @@
 			vsp = &vfp_single_default_qnan;
 			ret = FPSCR_IOC;
 		}
-		vfp_put_float(sd, vfp_single_pack(vsp));
+		vfp_put_float(vfp_single_pack(vsp), sd);
 		return ret;
 	}
 
@@ -517,7 +517,7 @@
 	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fcvtd");
 
  pack_nan:
-	vfp_put_double(dd, vfp_double_pack(&vdd));
+	vfp_put_double(vfp_double_pack(&vdd), dd);
 	return exceptions;
 }
 
@@ -613,7 +613,7 @@
 
 	pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, d);
+	vfp_put_float(d, sd);
 
 	return exceptions;
 }
@@ -692,7 +692,7 @@
 
 	pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, (s32)d);
+	vfp_put_float((s32)d, sd);
 
 	return exceptions;
 }
@@ -1127,7 +1127,7 @@
  vsn_nan:
 	exceptions = vfp_propagate_nan(&vsd, &vsn, &vsm, fpscr);
  pack:
-	vfp_put_float(sd, vfp_single_pack(&vsd));
+	vfp_put_float(vfp_single_pack(&vsd), sd);
 	return exceptions;
 
  vsm_nan:
@@ -1147,7 +1147,7 @@
 	goto pack;
 
  invalid:
-	vfp_put_float(sd, vfp_single_pack(&vfp_single_default_qnan));
+	vfp_put_float(vfp_single_pack(&vfp_single_default_qnan), sd);
 	return FPSCR_IOC;
 }
 
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index eb79aa2..a6b8bd8 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -317,20 +317,14 @@
 	movl %eax,%gs
 	lldt %ax
 	cld			# gcc2 wants the direction flag cleared at all times
+	pushl %eax		# fake return address
 #ifdef CONFIG_SMP
 	movb ready, %cl
 	movb $1, ready
-	cmpb $0,%cl
-	je 1f			# the first CPU calls start_kernel
-				# all other CPUs call initialize_secondary
-	call initialize_secondary
-	jmp L6
-1:
+	cmpb $0,%cl		# the first CPU calls start_kernel
+	jne initialize_secondary # all other CPUs call initialize_secondary
 #endif /* CONFIG_SMP */
-	call start_kernel
-L6:
-	jmp L6			# main should never return here, but
-				# just in case, we know what happens.
+	jmp start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c
index c6737c3..17647a5 100644
--- a/arch/i386/kernel/hpet.c
+++ b/arch/i386/kernel/hpet.c
@@ -35,7 +35,7 @@
 	void __iomem* hpet_base;
 	u64 tmp;
 
-	if (!hpet_address)
+	if (!is_hpet_enabled())
 		return -ENODEV;
 
 	/* calculate the hpet address: */
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index 6cb529f..5fe547c 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -82,10 +82,6 @@
 	}
 #endif
 
-	if (!irq_desc[irq].handle_irq) {
-		__do_IRQ(irq, regs);
-		goto out_exit;
-	}
 #ifdef CONFIG_4KSTACKS
 
 	curctx = (union irq_ctx *) current_thread_info();
@@ -125,7 +121,6 @@
 #endif
 		__do_IRQ(irq, regs);
 
-out_exit:
 	irq_exit();
 
 	return 1;
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index f168220..345ffb7 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -956,38 +956,6 @@
 	return 0;
 }
 
- /*
-  * This function checks if the entire range <start,end> is mapped with type.
-  *
-  * Note: this function only works correct if the e820 table is sorted and
-  * not-overlapping, which is the case
-  */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
-{
-	u64 start = s;
-	u64 end = e;
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/* if start is now at or beyond end, we're done, full
-		 * coverage */
-		if (start >= end)
-			return 1; /* we're done */
-	}
-	return 0;
-}
-
 /*
  * Find the highest page frame number we have available
  */
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 82e0fd0..7e9edaf 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -92,7 +92,11 @@
 asmlinkage void machine_check(void);
 
 static int kstack_depth_to_print = 24;
+#ifdef CONFIG_STACK_UNWIND
 static int call_trace = 1;
+#else
+#define call_trace (-1)
+#endif
 ATOMIC_NOTIFIER_HEAD(i386die_chain);
 
 int register_die_notifier(struct notifier_block *nb)
@@ -187,22 +191,21 @@
 			if (unwind_init_blocked(&info, task) == 0)
 				unw_ret = show_trace_unwind(&info, log_lvl);
 		}
-		if (unw_ret > 0 && !arch_unw_user_mode(&info)) {
-#ifdef CONFIG_STACK_UNWIND
-			print_symbol("DWARF2 unwinder stuck at %s\n",
-				     UNW_PC(&info));
-			if (call_trace == 1) {
-				printk("Leftover inexact backtrace:\n");
-				if (UNW_SP(&info))
+		if (unw_ret > 0) {
+			if (call_trace == 1 && !arch_unw_user_mode(&info)) {
+				print_symbol("DWARF2 unwinder stuck at %s\n",
+					     UNW_PC(&info));
+				if (UNW_SP(&info) >= PAGE_OFFSET) {
+					printk("Leftover inexact backtrace:\n");
 					stack = (void *)UNW_SP(&info);
-			} else if (call_trace > 1)
+				} else
+					printk("Full inexact backtrace again:\n");
+			} else if (call_trace >= 1)
 				return;
 			else
 				printk("Full inexact backtrace again:\n");
-#else
+		} else
 			printk("Inexact backtrace:\n");
-#endif
-		}
 	}
 
 	if (task == current) {
@@ -1241,6 +1244,7 @@
 }
 __setup("kstack=", kstack_setup);
 
+#ifdef CONFIG_STACK_UNWIND
 static int __init call_trace_setup(char *s)
 {
 	if (strcmp(s, "old") == 0)
@@ -1254,3 +1258,4 @@
 	return 1;
 }
 __setup("call_trace=", call_trace_setup);
+#endif
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 0a362e3..1220dd8 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -237,6 +237,11 @@
 		pci_probe &= ~PCI_PROBE_MMCONF;
 		return NULL;
 	}
+	/* override DMI blacklist */
+	else if (!strcmp(str, "mmconf")) {
+		pci_probe |= PCI_PROBE_MMCONF_FORCE;
+		return NULL;
+	}
 #endif
 	else if (!strcmp(str, "noacpi")) {
 		acpi_noirq_set();
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 972180f..ef5a2fa 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -12,6 +12,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
+#include <linux/dmi.h>
 #include <asm/e820.h>
 #include "pci.h"
 
@@ -187,9 +188,31 @@
 	}
 }
 
+static int disable_mcfg(struct dmi_system_id *d)
+{
+	printk("PCI: %s detected. Disabling MCFG.\n", d->ident);
+	pci_probe &= ~PCI_PROBE_MMCONF;
+	return 0;
+}
+
+static struct dmi_system_id __initdata dmi_bad_mcfg[] = {
+	/* Has broken MCFG table that makes the system hang when used */
+        {
+         .callback = disable_mcfg,
+         .ident = "Intel D3C5105 SDV",
+         .matches = {
+                     DMI_MATCH(DMI_BIOS_VENDOR, "Intel"),
+                     DMI_MATCH(DMI_BOARD_NAME, "D26928"),
+                     },
+         },
+         {}
+};
+
 void __init pci_mmcfg_init(void)
 {
-	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+	dmi_check_system(dmi_bad_mcfg);
+
+	if ((pci_probe & (PCI_PROBE_MMCONF_FORCE|PCI_PROBE_MMCONF)) == 0)
 		return;
 
 	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
@@ -198,15 +221,6 @@
 	    (pci_mmcfg_config[0].base_address == 0))
 		return;
 
-	if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
-			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
-			E820_RESERVED)) {
-		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
-				pci_mmcfg_config[0].base_address);
-		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
-		return;
-	}
-
 	printk(KERN_INFO "PCI: Using MMCONFIG\n");
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index bf4e793..49a849b 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -16,7 +16,8 @@
 #define PCI_PROBE_CONF1		0x0002
 #define PCI_PROBE_CONF2		0x0004
 #define PCI_PROBE_MMCONF	0x0008
-#define PCI_PROBE_MASK		0x000f
+#define PCI_PROBE_MMCONF_FORCE	0x0010
+#define PCI_PROBE_MASK		0x00ff
 
 #define PCI_NO_SORT		0x0100
 #define PCI_BIOS_SORT		0x0200
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 47de9ee..674de89 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -258,7 +258,7 @@
 	int "Maximum number of CPUs (2-1024)"
 	range 2 1024
 	depends on SMP
-	default "64"
+	default "1024"
 	help
 	  You should set this to the number of CPUs in your system, but
 	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
@@ -354,7 +354,7 @@
 config NODES_SHIFT
 	int "Max num nodes shift(3-10)"
 	range 3 10
-	default "8"
+	default "10"
 	depends on NEED_MULTIPLE_NODES
 	help
 	  This option specifies the maximum number of nodes in your SSI system.
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index d24fa39..f648c61 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -67,10 +67,8 @@
 #endif
 
 	sysfs_cpus = kzalloc(sizeof(struct ia64_cpu) * NR_CPUS, GFP_KERNEL);
-	if (!sysfs_cpus) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!sysfs_cpus)
+		panic("kzalloc in topology_init failed - NR_CPUS too big?");
 
 	for_each_present_cpu(i) {
 		if((err = arch_register_cpu(i)))
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index c2f69f7..1f35408 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -279,8 +279,8 @@
 		return part->reason;
 	}
 
-	bte_ret = xp_bte_copy((u64) src, (u64) ia64_tpa((u64) dst),
-				(u64) cnt, (BTE_NORMAL | BTE_WACQUIRE), NULL);
+	bte_ret = xp_bte_copy((u64) src, (u64) dst, (u64) cnt,
+					(BTE_NORMAL | BTE_WACQUIRE), NULL);
 	if (bte_ret == BTE_SUCCESS) {
 		return xpcSuccess;
 	}
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index 5e8e59e..4d026f9 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -1052,6 +1052,8 @@
 	if (xpc_sysctl) {
 		unregister_sysctl_table(xpc_sysctl);
 	}
+
+	kfree(xpc_remote_copy_buffer_base);
 }
 
 
@@ -1212,24 +1214,20 @@
 	partid_t partid;
 	struct xpc_partition *part;
 	pid_t pid;
+	size_t buf_size;
 
 
 	if (!ia64_platform_is("sn2")) {
 		return -ENODEV;
 	}
 
-	/*
-	 * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
-	 * various portions of a partition's reserved page. Its size is based
-	 * on the size of the reserved page header and part_nasids mask. So we
-	 * need to ensure that the other items will fit as well.
-	 */
-	if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
-		dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
-		return -EPERM;
-	}
-	DBUG_ON((u64) xpc_remote_copy_buffer !=
-				L1_CACHE_ALIGN((u64) xpc_remote_copy_buffer));
+
+	buf_size = max(XPC_RP_VARS_SIZE,
+				XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
+	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
+				     GFP_KERNEL, &xpc_remote_copy_buffer_base);
+	if (xpc_remote_copy_buffer == NULL)
+		return -ENOMEM;
 
 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
@@ -1293,6 +1291,8 @@
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
@@ -1311,6 +1311,8 @@
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
@@ -1362,6 +1364,8 @@
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 2a89cfc..57c723f 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -71,19 +71,15 @@
  * Generic buffer used to store a local copy of portions of a remote
  * partition's reserved page (either its header and part_nasids mask,
  * or its vars).
- *
- * xpc_discovery runs only once and is a seperate thread that is
- * very likely going to be processing in parallel with receiving
- * interrupts.
  */
-char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
-							XP_NASID_MASK_BYTES];
+char *xpc_remote_copy_buffer;
+void *xpc_remote_copy_buffer_base;
 
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
  */
-static void *
+void *
 xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 {
 	/* see if kmalloc will give us cachline aligned memory by default */
@@ -148,7 +144,7 @@
 			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
+		bte_res = xp_bte_copy(rp_pa, buf, buf_len,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bte_res != BTE_SUCCESS) {
 			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -447,7 +443,7 @@
 
 		/* pull the remote_hb cache line */
 		bres = xp_bte_copy(part->remote_vars_pa,
-					ia64_tpa((u64) remote_vars),
+					(u64) remote_vars,
 					XPC_RP_VARS_SIZE,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bres != BTE_SUCCESS) {
@@ -498,8 +494,7 @@
 
 
 	/* pull over the reserved page header and part_nasids mask */
-
-	bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+	bres = xp_bte_copy(*remote_rp_pa, (u64) remote_rp,
 				XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
@@ -554,11 +549,8 @@
 		return xpcVarsNotSet;
 	}
 
-
 	/* pull over the cross partition variables */
-
-	bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
-				XPC_RP_VARS_SIZE,
+	bres = xp_bte_copy(remote_vars_pa, (u64) remote_vars, XPC_RP_VARS_SIZE,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -1239,7 +1231,7 @@
 
 	part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-	bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
+	bte_res = xp_bte_copy(part_nasid_pa, (u64) nasid_mask,
 			xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
 
 	return xpc_map_bte_errors(bte_res);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index abb325e..4d4b6fb 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -354,6 +354,7 @@
 config PPC_PSERIES
 	depends on PPC_MULTIPLATFORM && PPC64
 	bool "IBM pSeries & new (POWER5-based) iSeries"
+	select MPIC
 	select PPC_I8259
 	select PPC_RTAS
 	select RTAS_ERROR_LOGGING
@@ -363,6 +364,7 @@
 config PPC_CHRP
 	bool "Common Hardware Reference Platform (CHRP) based machines"
 	depends on PPC_MULTIPLATFORM && PPC32
+	select MPIC
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
 	select PPC_RTAS
@@ -373,6 +375,7 @@
 config PPC_PMAC
 	bool "Apple PowerMac based machines"
 	depends on PPC_MULTIPLATFORM
+	select MPIC
 	select PPC_INDIRECT_PCI if PPC32
 	select PPC_MPC106 if PPC32
 	default y
@@ -380,6 +383,7 @@
 config PPC_PMAC64
 	bool
 	depends on PPC_PMAC && POWER4
+	select MPIC
 	select U3_DART
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
@@ -389,6 +393,7 @@
 config PPC_PREP
 	bool "PowerPC Reference Platform (PReP) based machines"
 	depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+	select MPIC
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
 	select PPC_UDBG_16550
@@ -397,6 +402,7 @@
 config PPC_MAPLE
 	depends on PPC_MULTIPLATFORM && PPC64
 	bool "Maple 970FX Evaluation Board"
+	select MPIC
 	select U3_DART
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
@@ -439,12 +445,6 @@
 	depends on PPC_MULTIPLATFORM && PPC64
 	default n
 
-config MPIC
-	depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \
-			       || MPC7448HPC2
-	bool
-	default y
-
 config PPC_RTAS
 	bool
 	default n
@@ -812,6 +812,14 @@
 	depends on PPC64 || POWER4 || 6xx && !CPM2
 	default y
 
+config MPIC
+	bool
+	default n
+
+config MPIC_WEIRD
+	bool
+	default n
+
 config PPC_I8259
 	bool
 	default n
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
new file mode 100644
index 0000000..d7b985e
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -0,0 +1,190 @@
+/*
+ * MPC7448HPC2 (Taiga) board Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * 2006 Roy Zang <Roy Zang at freescale.com>.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "mpc7448hpc2";
+	compatible = "mpc74xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells =<0>;
+		linux,phandle = <200>;
+				
+		PowerPC,7448@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K bytes
+			i-cache-size = <8000>;		// L1, 32K bytes
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			clock-frequency = <0>;		// From U-Boot
+			bus-frequency = <0>;		// From U-Boot
+			32-bit;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 20000000	// DDR2   512M at 0
+		       >;
+	};
+
+  	tsi108@c0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "tsi-bridge";
+		ranges = <00000000 c0000000 00010000>;
+		reg = <c0000000 00010000>;
+		bus-frequency = <0>;
+
+		i2c@7000 {
+			interrupt-parent = <7400>;
+			interrupts = <E 0>;
+			reg = <7000 400>;
+			device_type = "i2c";
+			compatible  = "tsi-i2c";
+		};
+
+		mdio@6000 {
+			device_type = "mdio";
+			compatible = "tsi-ethernet";
+
+			ethernet-phy@6000 {
+				linux,phandle = <6000>;
+				interrupt-parent = <7400>;
+				interrupts = <2 1>;
+				reg = <6000 50>;
+				phy-id = <8>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@6400 {
+				linux,phandle = <6400>;
+				interrupt-parent = <7400>;
+				interrupts = <2 1>;
+				reg = <6000 50>;
+				phy-id = <9>;
+				device_type = "ethernet-phy";
+			};
+
+		};
+
+		ethernet@6200 {
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSI-ETH";
+			compatible = "tsi-ethernet";
+			reg = <6000 200>;
+			address = [ 00 06 D2 00 00 01 ];
+			interrupts = <10 2>;
+			interrupt-parent = <7400>;
+			phy-handle = <6000>;
+		};
+
+		ethernet@6600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSI-ETH";
+			compatible = "tsi-ethernet";
+			reg = <6400 200>;
+			address = [ 00 06 D2 00 00 02 ];
+			interrupts = <11 2>;
+			interrupt-parent = <7400>;
+			phy-handle = <6400>;
+		};
+
+		serial@7808 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <7808 200>;
+			clock-frequency = <3f6b5a00>;
+			interrupts = <c 0>;
+			interrupt-parent = <7400>;
+		};
+
+		serial@7c08 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <7c08 200>;
+			clock-frequency = <3f6b5a00>;
+			interrupts = <d 0>;
+			interrupt-parent = <7400>;
+		};
+
+	  	pic@7400 {
+			linux,phandle = <7400>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <7400 400>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                       	big-endian;
+		};
+		pci@1000 {
+			compatible = "tsi10x";
+			device_type = "pci";
+			linux,phandle = <1000>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <1000 1000>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 e0000000 e0000000 0 1A000000	
+				  01000000 0 00000000 fa000000 0 00010000>;
+			clock-frequency = <7f28154>;
+			interrupt-parent = <7400>;
+			interrupts = <17 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x11 */
+				0800 0 0 1 7400 24 0
+				0800 0 0 2 7400 25 0
+				0800 0 0 3 7400 26 0
+				0800 0 0 4 7400 27 0
+
+				/* IDSEL 0x12 */
+				1000 0 0 1 7400 25 0
+				1000 0 0 2 7400 26 0
+				1000 0 0 3 7400 27 0
+				1000 0 0 4 7400 24 0
+
+				/* IDSEL 0x13 */
+				1800 0 0 1 7400 26 0
+				1800 0 0 2 7400 27 0
+				1800 0 0 3 7400 24 0
+				1800 0 0 4 7400 25 0
+
+				/* IDSEL 0x14 */
+				2000 0 0 1 7400 27 0
+				2000 0 0 2 7400 24 0
+				2000 0 0 3 7400 25 0
+				2000 0 0 4 7400 26 0
+				>;
+		};
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts
new file mode 100644
index 0000000..12f5dbf
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8349emds.dts
@@ -0,0 +1,328 @@
+/*
+ * MPC8349E MDS Device Tree Source
+ *
+ * Copyright 2005, 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8349EMDS";
+	compatible = "MPC834xMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;	// 256MB at 0
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supportted for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-mph";
+			reg = <22000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <27 2>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <700>;
+				interrupts = <11 2>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 b000 0 0 1 700 15 8
+					 b000 0 0 2 700 16 8
+					 b000 0 0 3 700 17 8
+					 b000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 10000000
+				  42000000 0 80000000 80000000 0 10000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		pci@8600 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 b000 0 0 1 700 15 8
+					 b000 0 0 2 700 16 8
+					 b000 0 0 3 700 17 8
+					 b000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 b0000000 b0000000 0 10000000
+				  42000000 0 90000000 90000000 0 10000000
+				  01000000 0 00000000 e2100000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8600 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};
diff --git a/arch/powerpc/configs/mpc834x_sys_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
similarity index 100%
rename from arch/powerpc/configs/mpc834x_sys_defconfig
rename to arch/powerpc/configs/mpc834x_mds_defconfig
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 7e2c9fe..821e152 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -2,6 +2,11 @@
  *  FPU support code, moved here from head.S so that it can be used
  *  by chips which use other head-whatever.S files.
  *
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *    Copyright (C) 1996 Paul Mackerras.
+ *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 7ee6854..12c5971 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -322,7 +322,8 @@
 
 static LIST_HEAD(irq_hosts);
 static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED;
-
+static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
+static unsigned int irq_radix_writer;
 struct irq_map_entry irq_map[NR_IRQS];
 static unsigned int irq_virq_count = NR_IRQS;
 static struct irq_host *irq_default_host;
@@ -455,6 +456,58 @@
 		irq_virq_count = count;
 }
 
+/* radix tree not lockless safe ! we use a brlock-type mecanism
+ * for now, until we can use a lockless radix tree
+ */
+static void irq_radix_wrlock(unsigned long *flags)
+{
+	unsigned int cpu, ok;
+
+	spin_lock_irqsave(&irq_big_lock, *flags);
+	irq_radix_writer = 1;
+	smp_mb();
+	do {
+		barrier();
+		ok = 1;
+		for_each_possible_cpu(cpu) {
+			if (per_cpu(irq_radix_reader, cpu)) {
+				ok = 0;
+				break;
+			}
+		}
+		if (!ok)
+			cpu_relax();
+	} while(!ok);
+}
+
+static void irq_radix_wrunlock(unsigned long flags)
+{
+	smp_wmb();
+	irq_radix_writer = 0;
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+}
+
+static void irq_radix_rdlock(unsigned long *flags)
+{
+	local_irq_save(*flags);
+	__get_cpu_var(irq_radix_reader) = 1;
+	smp_mb();
+	if (likely(irq_radix_writer == 0))
+		return;
+	__get_cpu_var(irq_radix_reader) = 0;
+	smp_wmb();
+	spin_lock(&irq_big_lock);
+	__get_cpu_var(irq_radix_reader) = 1;
+	spin_unlock(&irq_big_lock);
+}
+
+static void irq_radix_rdunlock(unsigned long flags)
+{
+	__get_cpu_var(irq_radix_reader) = 0;
+	local_irq_restore(flags);
+}
+
+
 unsigned int irq_create_mapping(struct irq_host *host,
 				irq_hw_number_t hwirq)
 {
@@ -604,13 +657,9 @@
 		/* Check if radix tree allocated yet */
 		if (host->revmap_data.tree.gfp_mask == 0)
 			break;
-		/* XXX radix tree not safe ! remove lock whem it becomes safe
-		 * and use some RCU sync to make sure everything is ok before we
-		 * can re-use that map entry
-		 */
-		spin_lock_irqsave(&irq_big_lock, flags);
+		irq_radix_wrlock(&flags);
 		radix_tree_delete(&host->revmap_data.tree, hwirq);
-		spin_unlock_irqrestore(&irq_big_lock, flags);
+		irq_radix_wrunlock(flags);
 		break;
 	}
 
@@ -677,25 +726,24 @@
 	if (tree->gfp_mask == 0)
 		return irq_find_mapping(host, hwirq);
 
-	/* XXX Current radix trees are NOT SMP safe !!! Remove that lock
-	 * when that is fixed (when Nick's patch gets in
-	 */
-	spin_lock_irqsave(&irq_big_lock, flags);
-
 	/* Now try to resolve */
+	irq_radix_rdlock(&flags);
 	ptr = radix_tree_lookup(tree, hwirq);
+	irq_radix_rdunlock(flags);
+
 	/* Found it, return */
 	if (ptr) {
 		virq = ptr - irq_map;
-		goto bail;
+		return virq;
 	}
 
 	/* If not there, try to insert it */
 	virq = irq_find_mapping(host, hwirq);
-	if (virq != NO_IRQ)
+	if (virq != NO_IRQ) {
+		irq_radix_wrlock(&flags);
 		radix_tree_insert(tree, hwirq, &irq_map[virq]);
- bail:
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+		irq_radix_wrunlock(flags);
+	}
 	return virq;
 }
 
@@ -806,12 +854,12 @@
 	struct irq_host *h;
 	unsigned long flags;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	irq_radix_wrlock(&flags);
 	list_for_each_entry(h, &irq_hosts, link) {
 		if (h->revmap_type == IRQ_HOST_MAP_TREE)
 			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	irq_radix_wrunlock(flags);
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 2fce773..138134c 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -1289,6 +1289,9 @@
 
 	DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
+#ifdef DEBUG
+	memset(&oirq, 0xff, sizeof(oirq));
+#endif
 	/* Try to get a mapping from the device-tree */
 	if (of_irq_map_pci(pci_dev, &oirq)) {
 		u8 line, pin;
@@ -1314,8 +1317,9 @@
 		if (virq != NO_IRQ)
 			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 	} else {
-		DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
-		    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+		DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+		    oirq.size, oirq.specifier[0], oirq.specifier[1],
+		    oirq.controller->full_name);
 
 		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 					     oirq.size);
@@ -1324,6 +1328,9 @@
 		DBG(" -> failed to map !\n");
 		return -1;
 	}
+
+	DBG(" -> mapped to linux irq %d\n", virq);
+
 	pci_dev->irq = virq;
 	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
 
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index f6a05f0..39d3bfc 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -126,10 +126,6 @@
 EXPORT_SYMBOL(pci_bus_to_hose);
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_NOT_COHERENT_CACHE
-EXPORT_SYMBOL(flush_dcache_all);
-#endif
-
 EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(kernel_thread);
 
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 462bced..4394e54 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -646,13 +646,13 @@
 	5 - 1,				/* 5 option vectors */
 
 	/* option vector 1: processor architectures supported */
-	3 - 1,				/* length */
+	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
 	OV1_PPC_2_04 | OV1_PPC_2_05,
 
 	/* option vector 2: Open Firmware options supported */
-	34 - 1,				/* length */
+	34 - 2,				/* length */
 	OV2_REAL_MODE,
 	0, 0,
 	W(0xffffffff),			/* real_base */
@@ -666,16 +666,16 @@
 	48,				/* max log_2(hash table size) */
 
 	/* option vector 3: processor options supported */
-	3 - 1,				/* length */
+	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV3_FP | OV3_VMX,
 
 	/* option vector 4: IBM PAPR implementation */
-	2 - 1,				/* length */
+	2 - 2,				/* length */
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	3 - 1,				/* length */
+	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
 };
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 11052c2..a10825a 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -639,14 +639,17 @@
 
 }
 
-int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
-		   struct of_irq *out_irq)
+int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 ointsize,
+		   u32 *addr, struct of_irq *out_irq)
 {
 	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
 	u32 *tmp, *imap, *imask;
 	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
 	int imaplen, match, i;
 
+	DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
+	    parent->full_name, intspec[0], intspec[1], ointsize);
+
 	ipar = of_node_get(parent);
 
 	/* First get the #interrupt-cells property of the current cursor
@@ -670,6 +673,9 @@
 
 	DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
 
+	if (ointsize != intsize)
+		return -EINVAL;
+
 	/* Look for this #address-cells. We have to implement the old linux
 	 * trick of looking for the parent here as some device-trees rely on it
 	 */
@@ -875,12 +881,15 @@
 	}
 	intsize = *tmp;
 
+	DBG(" intsize=%d intlen=%d\n", intsize, intlen);
+
 	/* Check index */
 	if ((index + 1) * intsize > intlen)
 		return -EINVAL;
 
 	/* Get new specifier and map it */
-	res = of_irq_map_raw(p, intspec + index * intsize, addr, out_irq);
+	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+			     addr, out_irq);
 	of_node_put(p);
 	return res;
 }
@@ -965,7 +974,7 @@
 	laddr[0] = (pdev->bus->number << 16)
 		| (pdev->devfn << 8);
 	laddr[1]  = laddr[2] = 0;
-	return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
+	return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
 }
 EXPORT_SYMBOL_GPL(of_irq_map_pci);
 #endif /* CONFIG_PCI */
diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c
index f19e2e0..de59c6c 100644
--- a/arch/powerpc/kernel/smp-tbsync.c
+++ b/arch/powerpc/kernel/smp-tbsync.c
@@ -45,8 +45,9 @@
 {
 	int cmd;
 	u64 tb;
+	unsigned long flags;
 
-	local_irq_disable();
+	local_irq_save(flags);
 	while (!running)
 		barrier();
 	rmb();
@@ -70,7 +71,7 @@
 			set_tb(tb >> 32, tb & 0xfffffffful);
 		enter_contest(tbsync->mark, -1);
 	}
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 static int __devinit start_contest(int cmd, long offset, int num)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 18e59e4..a124499 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -125,15 +125,8 @@
 unsigned long ppc_proc_freq;
 unsigned long ppc_tb_freq;
 
-u64 tb_last_jiffy __cacheline_aligned_in_smp;
-unsigned long tb_last_stamp;
-
-/*
- * Note that on ppc32 this only stores the bottom 32 bits of
- * the timebase value, but that's enough to tell when a jiffy
- * has passed.
- */
-DEFINE_PER_CPU(unsigned long, last_jiffy);
+static u64 tb_last_jiffy __cacheline_aligned_in_smp;
+static DEFINE_PER_CPU(u64, last_jiffy);
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /*
@@ -458,7 +451,7 @@
 		do {
 			seq = read_seqbegin_irqsave(&xtime_lock, flags);
 			sec = xtime.tv_sec;
-			nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp);
+			nsec = xtime.tv_nsec + tb_ticks_since(tb_last_jiffy);
 		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 		usec = nsec / 1000;
 		while (usec >= 1000000) {
@@ -700,7 +693,6 @@
 		tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
 		if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
 			tb_last_jiffy = tb_next_jiffy;
-			tb_last_stamp = per_cpu(last_jiffy, cpu);
 			do_timer(regs);
 			timer_recalc_offset(tb_last_jiffy);
 			timer_check_rtc();
@@ -749,7 +741,7 @@
 	int i;
 	unsigned long half = tb_ticks_per_jiffy / 2;
 	unsigned long offset = tb_ticks_per_jiffy / max_cpus;
-	unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
+	u64 previous_tb = per_cpu(last_jiffy, boot_cpuid);
 
 	/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
 	previous_tb -= tb_ticks_per_jiffy;
@@ -830,7 +822,7 @@
 	 * and therefore the (jiffies - wall_jiffies) computation
 	 * has been removed.
 	 */
-	tb_delta = tb_ticks_since(tb_last_stamp);
+	tb_delta = tb_ticks_since(tb_last_jiffy);
 	tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */
 	new_nsec -= SCALE_XSEC(tb_delta, 1000000000);
 
@@ -950,8 +942,7 @@
 	if (__USE_RTC()) {
 		/* 601 processor: dec counts down by 128 every 128ns */
 		ppc_tb_freq = 1000000000;
-		tb_last_stamp = get_rtcl();
-		tb_last_jiffy = tb_last_stamp;
+		tb_last_jiffy = get_rtcl();
 	} else {
 		/* Normal PowerPC with timebase register */
 		ppc_md.calibrate_decr();
@@ -959,7 +950,7 @@
 		       ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
 		printk(KERN_DEBUG "time_init: processor frequency   = %lu.%.6lu MHz\n",
 		       ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
-		tb_last_stamp = tb_last_jiffy = get_tb();
+		tb_last_jiffy = get_tb();
 	}
 
 	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
@@ -1036,7 +1027,7 @@
 	do_gtod.varp = &do_gtod.vars[0];
 	do_gtod.var_idx = 0;
 	do_gtod.varp->tb_orig_stamp = tb_last_jiffy;
-	__get_cpu_var(last_jiffy) = tb_last_stamp;
+	__get_cpu_var(last_jiffy) = tb_last_jiffy;
 	do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
 	do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
 	do_gtod.varp->tb_to_xs = tb_to_xs;
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index fd66acf..7173ba9 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -11,6 +11,7 @@
 
 	.align	7
 _GLOBAL(memcpy)
+	std	r3,48(r1)	/* save destination pointer for return value */
 	mtcrf	0x01,r5
 	cmpldi	cr1,r5,16
 	neg	r6,r3		# LS 3 bits = # bytes to 8-byte dest bdry
@@ -38,7 +39,7 @@
 	stdu	r9,16(r3)
 	bdnz	1b
 3:	std	r8,8(r3)
-	beqlr
+	beq	3f
 	addi	r3,r3,16
 	ld	r9,8(r4)
 .Ldo_tail:
@@ -53,7 +54,8 @@
 2:	bf	cr7*4+3,3f
 	rotldi	r9,r9,8
 	stb	r9,0(r3)
-3:	blr
+3:	ld	r3,48(r1)	/* return dest pointer */
+	blr
 
 .Lsrc_unaligned:
 	srdi	r6,r5,3
@@ -115,7 +117,7 @@
 5:	srd	r12,r9,r11
 	or	r12,r8,r12
 	std	r12,24(r3)
-	beqlr
+	beq	4f
 	cmpwi	cr1,r5,8
 	addi	r3,r3,32
 	sld	r9,r9,r10
@@ -167,4 +169,5 @@
 3:	bf	cr7*4+3,4f
 	lbz	r0,0(r4)
 	stb	r0,0(r3)
-4:	blr
+4:	ld	r3,48(r1)	/* return dest pointer */
+	blr
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 376829e..0a0a0487b 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -103,7 +103,7 @@
 
 	/* Determine number of entries necessary to cover lowmem */
 	pinned_tlbs = (unsigned int)
-		(_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT);
+		(_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
 
 	/* Write upper watermark to save location */
 	tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
@@ -111,7 +111,7 @@
 	/* If necessary, set additional pinned TLBs */
 	if (pinned_tlbs > 1)
 		for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
-			unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE;
+			unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
 			ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
 		}
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index b463056..cf3967a 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -46,26 +46,6 @@
 unsigned long isa_mem_base = 0;
 #endif
 
-#ifdef CONFIG_PCI
-static int
-mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *       A      B      C      D
-	     */
-	{
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* idsel 0x0e */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x0f */
-		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x10 */
-	};
-
-	const long min_idsel = 0x0e, max_idsel = 0x10, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-#endif				/* CONFIG_PCI */
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -92,8 +72,6 @@
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
 
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc83xx_map_irq;
 	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
 #endif
 
@@ -106,25 +84,13 @@
 
 void __init mpc834x_itx_init_IRQ(void)
 {
-	u8 senses[8] = {
-		0,			/* EXT 0 */
-		IRQ_SENSE_LEVEL,	/* EXT 1 */
-		IRQ_SENSE_LEVEL,	/* EXT 2 */
-		0,			/* EXT 3 */
-#ifdef CONFIG_PCI
-		IRQ_SENSE_LEVEL,	/* EXT 4 */
-		IRQ_SENSE_LEVEL,	/* EXT 5 */
-		IRQ_SENSE_LEVEL,	/* EXT 6 */
-		IRQ_SENSE_LEVEL,	/* EXT 7 */
-#else
-		0,			/* EXT 4 */
-		0,			/* EXT 5 */
-		0,			/* EXT 6 */
-		0,			/* EXT 7 */
-#endif
-	};
+	struct device_node *np;
 
-	ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8);
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
 
 	/* Initialize the default interrupt mapping priorities,
 	 * in case the boot rom changed something on us.
@@ -153,4 +119,7 @@
 	.time_init		= mpc83xx_time_init,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup		= mpc83xx_pcibios_fixup,
+#endif
 };
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c
index 3e1c16e..32df239 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_sys.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c
@@ -43,33 +43,6 @@
 unsigned long isa_mem_base = 0;
 #endif
 
-#ifdef CONFIG_PCI
-static int
-mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *       A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x11 */
-		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x12 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x13 */
-		{0, 0, 0, 0},
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x15 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x16 */
-		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x17 */
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* idsel 0x18 */
-		{0, 0, 0, 0},			/* idsel 0x19 */
-		{0, 0, 0, 0},			/* idsel 0x20 */
-	};
-
-	const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-#endif				/* CONFIG_PCI */
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -96,8 +69,6 @@
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
 
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc83xx_map_irq;
 	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
 #endif
 
@@ -110,25 +81,13 @@
 
 void __init mpc834x_sys_init_IRQ(void)
 {
-	u8 senses[8] = {
-		0,			/* EXT 0 */
-		IRQ_SENSE_LEVEL,	/* EXT 1 */
-		IRQ_SENSE_LEVEL,	/* EXT 2 */
-		0,			/* EXT 3 */
-#ifdef CONFIG_PCI
-		IRQ_SENSE_LEVEL,	/* EXT 4 */
-		IRQ_SENSE_LEVEL,	/* EXT 5 */
-		IRQ_SENSE_LEVEL,	/* EXT 6 */
-		IRQ_SENSE_LEVEL,	/* EXT 7 */
-#else
-		0,			/* EXT 4 */
-		0,			/* EXT 5 */
-		0,			/* EXT 6 */
-		0,			/* EXT 7 */
-#endif
-	};
+	struct device_node *np;
 
-	ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8);
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
 
 	/* Initialize the default interrupt mapping priorities,
 	 * in case the boot rom changed something on us.
@@ -178,4 +137,7 @@
 	.time_init		= mpc83xx_time_init,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup		= mpc83xx_pcibios_fixup,
+#endif
 };
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 01cae10..2c82bca 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -11,6 +11,7 @@
 
 extern int add_bridge(struct device_node *dev);
 extern int mpc83xx_exclude_device(u_char bus, u_char devfn);
+extern void mpc83xx_pcibios_fixup(void);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index 3b5e563..5d84a9c 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -45,6 +45,15 @@
 	return PCIBIOS_SUCCESSFUL;
 }
 
+void __init mpc83xx_pcibios_fixup(void)
+{
+	struct pci_dev *dev = NULL;
+
+	/* map all the PCI irqs */
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
+
 int __init add_bridge(struct device_node *dev)
 {
 	int len;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 146da30..0b1b521 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -52,6 +52,7 @@
 #endif
 
 
+#ifdef CONFIG_PCI
 static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc,
 				 struct pt_regs *regs)
 {
@@ -60,40 +61,43 @@
 		generic_handle_irq(cascade_irq, regs);
 	desc->chip->eoi(irq);
 }
+#endif	/* CONFIG_PCI */
 
 void __init
 mpc86xx_hpcn_init_irq(void)
 {
 	struct mpic *mpic1;
-	struct device_node *np, *cascade_node = NULL;
+	struct device_node *np;
+	struct resource res;
+#ifdef CONFIG_PCI
+	struct device_node *cascade_node = NULL;
 	int cascade_irq;
-	phys_addr_t openpic_paddr;
+#endif
 
+	/* Determine PIC address. */
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL)
 		return;
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
+	of_address_to_resource(np, 0, &res);
 
 	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, openpic_paddr,
+	mpic1 = mpic_alloc(np, res.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			16, NR_IRQS - 4,
 			" MPIC     ");
 	BUG_ON(mpic1 == NULL);
 
-	mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
+	mpic_assign_isu(mpic1, 0, res.start + 0x10000);
 
 	/* 48 Internal Interrupts */
-	mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
-	mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
-	mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
+	mpic_assign_isu(mpic1, 1, res.start + 0x10200);
+	mpic_assign_isu(mpic1, 2, res.start + 0x10400);
+	mpic_assign_isu(mpic1, 3, res.start + 0x10600);
 
 	/* 16 External interrupts
 	 * Moving them from [0 - 15] to [64 - 79]
 	 */
-	mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
+	mpic_assign_isu(mpic1, 4, res.start + 0x10000);
 
 	mpic_init(mpic1);
 
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index bc51390..a8c8f0a 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -188,7 +188,8 @@
 
 	printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
 	       "Firmware bus number: %d->%d\n",
-		rsrc.start, hose->first_busno, hose->last_busno);
+	       (unsigned long) rsrc.start,
+	       hose->first_busno, hose->last_busno);
 
 	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
 		hose, hose->cfg_addr, hose->cfg_data);
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index ba07a9a..234a861 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -80,6 +80,7 @@
 	select DEFAULT_UIMAGE
 	select PPC_UDBG_16550
 	select MPIC
+	select MPIC_WEIRD
 	help
 	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
 	  platform
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index ed00ed2..5d393eb 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -215,7 +215,7 @@
 
 	mpic = mpic_alloc(tsi_pic, mpic_paddr,
 			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
-			MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
+			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
 			0, /* num_sources used */
 			0, /* num_sources used */
 			"Tsi108_PIC");
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index 6d66359..aacfa59 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -256,7 +256,7 @@
 	.write_reg32		= macio_do_write_reg32,
 	.read_reg32		= macio_do_read_reg32,
 	.write_reg8		= macio_do_write_reg8,
-	.read_reg32		= macio_do_read_reg8,
+	.read_reg8		= macio_do_read_reg8,
 	.read_reg32_msrx	= macio_do_read_reg32_msrx,
 	.read_reg8_msrx		= macio_do_read_reg8_msrx,
 	.write_reg32_slm	= macio_do_write_reg32_slm,
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 060789e..39f7ddb 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -87,8 +87,8 @@
 static void pmac_mask_and_ack_irq(unsigned int virq)
 {
 	unsigned int src = irq_map[virq].hwirq;
-        unsigned long bit = 1UL << (virq & 0x1f);
-        int i = virq >> 5;
+        unsigned long bit = 1UL << (src & 0x1f);
+        int i = src >> 5;
         unsigned long flags;
 
 	spin_lock_irqsave(&pmac_pic_lock, flags);
@@ -175,7 +175,7 @@
 
   	spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
-        __pmac_set_irq_mask(src, 0);
+        __pmac_set_irq_mask(src, 1);
   	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index cebfae2..e5e999e 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -9,11 +9,11 @@
 obj-$(CONFIG_40x)		+= dcr.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
-obj-$(CONFIG_PPC_83xx)		+= ipic.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_PPC_TODC)		+= todc.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
- endif
+obj-$(CONFIG_PPC_83xx)		+= ipic.o
+endif
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 46801f5..70e7077 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -19,15 +19,18 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/prom.h>
 #include <asm/ipic.h>
-#include <asm/mpc83xx.h>
 
 #include "ipic.h"
 
-static struct ipic p_ipic;
 static struct ipic * primary_ipic;
+static DEFINE_SPINLOCK(ipic_lock);
 
 static struct ipic_info ipic_info[] = {
 	[9] = {
@@ -373,74 +376,220 @@
 	out_be32(base + (reg >> 2), value);
 }
 
-static inline struct ipic * ipic_from_irq(unsigned int irq)
+static inline struct ipic * ipic_from_irq(unsigned int virq)
 {
 	return primary_ipic;
 }
 
-static void ipic_enable_irq(unsigned int irq)
+#define ipic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
+
+static void ipic_unmask_irq(unsigned int virq)
 {
-	struct ipic *ipic = ipic_from_irq(irq);
-	unsigned int src = irq - ipic->irq_offset;
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
+	unsigned long flags;
 	u32 temp;
 
+	spin_lock_irqsave(&ipic_lock, flags);
+
 	temp = ipic_read(ipic->regs, ipic_info[src].mask);
 	temp |= (1 << (31 - ipic_info[src].bit));
 	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+
+	spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
-static void ipic_disable_irq(unsigned int irq)
+static void ipic_mask_irq(unsigned int virq)
 {
-	struct ipic *ipic = ipic_from_irq(irq);
-	unsigned int src = irq - ipic->irq_offset;
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
+	unsigned long flags;
 	u32 temp;
 
+	spin_lock_irqsave(&ipic_lock, flags);
+
 	temp = ipic_read(ipic->regs, ipic_info[src].mask);
 	temp &= ~(1 << (31 - ipic_info[src].bit));
 	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+
+	spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
-static void ipic_disable_irq_and_ack(unsigned int irq)
+static void ipic_ack_irq(unsigned int virq)
 {
-	struct ipic *ipic = ipic_from_irq(irq);
-	unsigned int src = irq - ipic->irq_offset;
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
+	unsigned long flags;
 	u32 temp;
 
-	ipic_disable_irq(irq);
+	spin_lock_irqsave(&ipic_lock, flags);
 
 	temp = ipic_read(ipic->regs, ipic_info[src].pend);
 	temp |= (1 << (31 - ipic_info[src].bit));
 	ipic_write(ipic->regs, ipic_info[src].pend, temp);
+
+	spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
-static void ipic_end_irq(unsigned int irq)
+static void ipic_mask_irq_and_ack(unsigned int virq)
 {
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		ipic_enable_irq(irq);
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
+	unsigned long flags;
+	u32 temp;
+
+	spin_lock_irqsave(&ipic_lock, flags);
+
+	temp = ipic_read(ipic->regs, ipic_info[src].mask);
+	temp &= ~(1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+
+	temp = ipic_read(ipic->regs, ipic_info[src].pend);
+	temp |= (1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].pend, temp);
+
+	spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
-struct hw_interrupt_type ipic = {
-	.typename = " IPIC  ",
-	.enable = ipic_enable_irq,
-	.disable = ipic_disable_irq,
-	.ack = ipic_disable_irq_and_ack,
-	.end = ipic_end_irq,
+static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type)
+{
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
+	struct irq_desc *desc = get_irq_desc(virq);
+	unsigned int vold, vnew, edibit;
+
+	if (flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_LEVEL_LOW;
+
+	/* ipic supports only low assertion and high-to-low change senses
+	 */
+	if (!(flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))) {
+		printk(KERN_ERR "ipic: sense type 0x%x not supported\n",
+			flow_type);
+		return -EINVAL;
+	}
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & IRQ_TYPE_LEVEL_LOW)  {
+		desc->status |= IRQ_LEVEL;
+		set_irq_handler(virq, handle_level_irq);
+	} else {
+		set_irq_handler(virq, handle_edge_irq);
+	}
+
+	/* only EXT IRQ senses are programmable on ipic
+	 * internal IRQ senses are LEVEL_LOW
+	 */
+	if (src == IPIC_IRQ_EXT0)
+		edibit = 15;
+	else
+		if (src >= IPIC_IRQ_EXT1 && src <= IPIC_IRQ_EXT7)
+			edibit = (14 - (src - IPIC_IRQ_EXT1));
+		else
+			return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL;
+
+	vold = ipic_read(ipic->regs, IPIC_SECNR);
+	if ((flow_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_FALLING) {
+		vnew = vold | (1 << edibit);
+	} else {
+		vnew = vold & ~(1 << edibit);
+	}
+	if (vold != vnew)
+		ipic_write(ipic->regs, IPIC_SECNR, vnew);
+	return 0;
+}
+
+static struct irq_chip ipic_irq_chip = {
+	.typename	= " IPIC  ",
+	.unmask		= ipic_unmask_irq,
+	.mask		= ipic_mask_irq,
+	.mask_ack	= ipic_mask_irq_and_ack,
+	.ack		= ipic_ack_irq,
+	.set_type	= ipic_set_irq_type,
 };
 
-void __init ipic_init(phys_addr_t phys_addr,
-		unsigned int flags,
-		unsigned int irq_offset,
-		unsigned char *senses,
-		unsigned int senses_count)
+static int ipic_host_match(struct irq_host *h, struct device_node *node)
 {
-	u32 i, temp = 0;
+	struct ipic *ipic = h->host_data;
 
-	primary_ipic = &p_ipic;
-	primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE);
+	/* Exact match, unless ipic node is NULL */
+	return ipic->of_node == NULL || ipic->of_node == node;
+}
 
-	primary_ipic->irq_offset = irq_offset;
+static int ipic_host_map(struct irq_host *h, unsigned int virq,
+			 irq_hw_number_t hw)
+{
+	struct ipic *ipic = h->host_data;
+	struct irq_chip *chip;
 
-	ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0);
+	/* Default chip */
+	chip = &ipic->hc_irq;
+
+	set_irq_chip_data(virq, ipic);
+	set_irq_chip_and_handler(virq, chip, handle_level_irq);
+
+	/* Set default irq type */
+	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int ipic_host_xlate(struct irq_host *h, struct device_node *ct,
+			   u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+	/* interrupt sense values coming from the device tree equal either
+	 * LEVEL_LOW (low assertion) or EDGE_FALLING (high-to-low change)
+	 */
+	*out_hwirq = intspec[0];
+	if (intsize > 1)
+		*out_flags = intspec[1];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+	return 0;
+}
+
+static struct irq_host_ops ipic_host_ops = {
+	.match	= ipic_host_match,
+	.map	= ipic_host_map,
+	.xlate	= ipic_host_xlate,
+};
+
+void __init ipic_init(struct device_node *node,
+		unsigned int flags)
+{
+	struct ipic	*ipic;
+	struct resource res;
+	u32 temp = 0, ret;
+
+	ipic = alloc_bootmem(sizeof(struct ipic));
+	if (ipic == NULL)
+		return;
+
+	memset(ipic, 0, sizeof(struct ipic));
+	ipic->of_node = node ? of_node_get(node) : NULL;
+
+	ipic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+				       NR_IPIC_INTS,
+				       &ipic_host_ops, 0);
+	if (ipic->irqhost == NULL) {
+		of_node_put(node);
+		return;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
+	ipic->regs = ioremap(res.start, res.end - res.start + 1);
+
+	ipic->irqhost->host_data = ipic;
+	ipic->hc_irq = ipic_irq_chip;
+
+	/* init hw */
+	ipic_write(ipic->regs, IPIC_SICNR, 0x0);
 
 	/* default priority scheme is grouped. If spread mode is required
 	 * configure SICFR accordingly */
@@ -453,49 +602,35 @@
 	if (flags & IPIC_SPREADMODE_MIX_B)
 		temp |= SICFR_MPSB;
 
-	ipic_write(primary_ipic->regs, IPIC_SICNR, temp);
+	ipic_write(ipic->regs, IPIC_SICNR, temp);
 
 	/* handle MCP route */
 	temp = 0;
 	if (flags & IPIC_DISABLE_MCP_OUT)
 		temp = SERCR_MCPR;
-	ipic_write(primary_ipic->regs, IPIC_SERCR, temp);
+	ipic_write(ipic->regs, IPIC_SERCR, temp);
 
 	/* handle routing of IRQ0 to MCP */
-	temp = ipic_read(primary_ipic->regs, IPIC_SEMSR);
+	temp = ipic_read(ipic->regs, IPIC_SEMSR);
 
 	if (flags & IPIC_IRQ0_MCP)
 		temp |= SEMSR_SIRQ0;
 	else
 		temp &= ~SEMSR_SIRQ0;
 
-	ipic_write(primary_ipic->regs, IPIC_SEMSR, temp);
+	ipic_write(ipic->regs, IPIC_SEMSR, temp);
 
-	for (i = 0 ; i < NR_IPIC_INTS ; i++) {
-		irq_desc[i+irq_offset].chip = &ipic;
-		irq_desc[i+irq_offset].status = IRQ_LEVEL;
-	}
+	primary_ipic = ipic;
+	irq_set_default_host(primary_ipic->irqhost);
 
-	temp = 0;
-	for (i = 0 ; i < senses_count ; i++) {
-		if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
-			temp |= 1 << (15 - i);
-			if (i != 0)
-				irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
-			else
-				irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0;
-		}
-	}
-	ipic_write(primary_ipic->regs, IPIC_SECNR, temp);
-
-	printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS,
-			senses_count, primary_ipic->regs);
+	printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS,
+			primary_ipic->regs);
 }
 
-int ipic_set_priority(unsigned int irq, unsigned int priority)
+int ipic_set_priority(unsigned int virq, unsigned int priority)
 {
-	struct ipic *ipic = ipic_from_irq(irq);
-	unsigned int src = irq - ipic->irq_offset;
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
 	u32 temp;
 
 	if (priority > 7)
@@ -520,10 +655,10 @@
 	return 0;
 }
 
-void ipic_set_highest_priority(unsigned int irq)
+void ipic_set_highest_priority(unsigned int virq)
 {
-	struct ipic *ipic = ipic_from_irq(irq);
-	unsigned int src = irq - ipic->irq_offset;
+	struct ipic *ipic = ipic_from_irq(virq);
+	unsigned int src = ipic_irq_to_hw(virq);
 	u32 temp;
 
 	temp = ipic_read(ipic->regs, IPIC_SICFR);
@@ -537,37 +672,10 @@
 
 void ipic_set_default_priority(void)
 {
-	ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0);
-	ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1);
-	ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2);
-	ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3);
-	ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4);
-	ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5);
-	ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6);
-	ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7);
-
-	ipic_set_priority(MPC83xx_IRQ_UART1, 0);
-	ipic_set_priority(MPC83xx_IRQ_UART2, 1);
-	ipic_set_priority(MPC83xx_IRQ_SEC2, 2);
-	ipic_set_priority(MPC83xx_IRQ_IIC1, 5);
-	ipic_set_priority(MPC83xx_IRQ_IIC2, 6);
-	ipic_set_priority(MPC83xx_IRQ_SPI, 7);
-	ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0);
-	ipic_set_priority(MPC83xx_IRQ_PIT, 1);
-	ipic_set_priority(MPC83xx_IRQ_PCI1, 2);
-	ipic_set_priority(MPC83xx_IRQ_PCI2, 3);
-	ipic_set_priority(MPC83xx_IRQ_EXT0, 4);
-	ipic_set_priority(MPC83xx_IRQ_EXT1, 5);
-	ipic_set_priority(MPC83xx_IRQ_EXT2, 6);
-	ipic_set_priority(MPC83xx_IRQ_EXT3, 7);
-	ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0);
-	ipic_set_priority(MPC83xx_IRQ_MU, 1);
-	ipic_set_priority(MPC83xx_IRQ_SBA, 2);
-	ipic_set_priority(MPC83xx_IRQ_DMA, 3);
-	ipic_set_priority(MPC83xx_IRQ_EXT4, 4);
-	ipic_set_priority(MPC83xx_IRQ_EXT5, 5);
-	ipic_set_priority(MPC83xx_IRQ_EXT6, 6);
-	ipic_set_priority(MPC83xx_IRQ_EXT7, 7);
+	ipic_write(primary_ipic->regs, IPIC_SIPRR_A, IPIC_SIPRR_A_DEFAULT);
+	ipic_write(primary_ipic->regs, IPIC_SIPRR_D, IPIC_SIPRR_D_DEFAULT);
+	ipic_write(primary_ipic->regs, IPIC_SMPRR_A, IPIC_SMPRR_A_DEFAULT);
+	ipic_write(primary_ipic->regs, IPIC_SMPRR_B, IPIC_SMPRR_B_DEFAULT);
 }
 
 void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq)
@@ -600,17 +708,20 @@
 	ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
 }
 
-/* Return an interrupt vector or -1 if no interrupt is pending. */
-int ipic_get_irq(struct pt_regs *regs)
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int ipic_get_irq(struct pt_regs *regs)
 {
 	int irq;
 
-	irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f;
+	BUG_ON(primary_ipic == NULL);
+
+#define IPIC_SIVCR_VECTOR_MASK	0x7f
+	irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & IPIC_SIVCR_VECTOR_MASK;
 
 	if (irq == 0)    /* 0 --> no irq is pending */
-		irq = -1;
+		return NO_IRQ;
 
-	return irq;
+	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
 static struct sysdev_class ipic_sysclass = {
diff --git a/arch/powerpc/sysdev/ipic.h b/arch/powerpc/sysdev/ipic.h
index a60c9d1..c28e589 100644
--- a/arch/powerpc/sysdev/ipic.h
+++ b/arch/powerpc/sysdev/ipic.h
@@ -15,7 +15,18 @@
 
 #include <asm/ipic.h>
 
-#define MPC83xx_IPIC_SIZE	(0x00100)
+#define NR_IPIC_INTS 128
+
+/* External IRQS */
+#define IPIC_IRQ_EXT0 48
+#define IPIC_IRQ_EXT1 17
+#define IPIC_IRQ_EXT7 23
+
+/* Default Priority Registers */
+#define IPIC_SIPRR_A_DEFAULT 0x05309770
+#define IPIC_SIPRR_D_DEFAULT 0x05309770
+#define IPIC_SMPRR_A_DEFAULT 0x05309770
+#define IPIC_SMPRR_B_DEFAULT 0x05309770
 
 /* System Global Interrupt Configuration Register */
 #define	SICFR_IPSA	0x00010000
@@ -31,7 +42,15 @@
 
 struct ipic {
 	volatile u32 __iomem	*regs;
-	unsigned int		irq_offset;
+
+	/* The remapper for this IPIC */
+	struct irq_host		*irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip		hc_irq;
+
+	/* The device node of the interrupt controller */
+	struct device_node	*of_node;
 };
 
 struct ipic_info {
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 6e0281a..b604926 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -54,6 +54,94 @@
 #endif
 #endif
 
+#ifdef CONFIG_MPIC_WEIRD
+static u32 mpic_infos[][MPIC_IDX_END] = {
+	[0] = {	/* Original OpenPIC compatible MPIC */
+		MPIC_GREG_BASE,
+		MPIC_GREG_FEATURE_0,
+		MPIC_GREG_GLOBAL_CONF_0,
+		MPIC_GREG_VENDOR_ID,
+		MPIC_GREG_IPI_VECTOR_PRI_0,
+		MPIC_GREG_IPI_STRIDE,
+		MPIC_GREG_SPURIOUS,
+		MPIC_GREG_TIMER_FREQ,
+
+		MPIC_TIMER_BASE,
+		MPIC_TIMER_STRIDE,
+		MPIC_TIMER_CURRENT_CNT,
+		MPIC_TIMER_BASE_CNT,
+		MPIC_TIMER_VECTOR_PRI,
+		MPIC_TIMER_DESTINATION,
+
+		MPIC_CPU_BASE,
+		MPIC_CPU_STRIDE,
+		MPIC_CPU_IPI_DISPATCH_0,
+		MPIC_CPU_IPI_DISPATCH_STRIDE,
+		MPIC_CPU_CURRENT_TASK_PRI,
+		MPIC_CPU_WHOAMI,
+		MPIC_CPU_INTACK,
+		MPIC_CPU_EOI,
+
+		MPIC_IRQ_BASE,
+		MPIC_IRQ_STRIDE,
+		MPIC_IRQ_VECTOR_PRI,
+		MPIC_VECPRI_VECTOR_MASK,
+		MPIC_VECPRI_POLARITY_POSITIVE,
+		MPIC_VECPRI_POLARITY_NEGATIVE,
+		MPIC_VECPRI_SENSE_LEVEL,
+		MPIC_VECPRI_SENSE_EDGE,
+		MPIC_VECPRI_POLARITY_MASK,
+		MPIC_VECPRI_SENSE_MASK,
+		MPIC_IRQ_DESTINATION
+	},
+	[1] = {	/* Tsi108/109 PIC */
+		TSI108_GREG_BASE,
+		TSI108_GREG_FEATURE_0,
+		TSI108_GREG_GLOBAL_CONF_0,
+		TSI108_GREG_VENDOR_ID,
+		TSI108_GREG_IPI_VECTOR_PRI_0,
+		TSI108_GREG_IPI_STRIDE,
+		TSI108_GREG_SPURIOUS,
+		TSI108_GREG_TIMER_FREQ,
+
+		TSI108_TIMER_BASE,
+		TSI108_TIMER_STRIDE,
+		TSI108_TIMER_CURRENT_CNT,
+		TSI108_TIMER_BASE_CNT,
+		TSI108_TIMER_VECTOR_PRI,
+		TSI108_TIMER_DESTINATION,
+
+		TSI108_CPU_BASE,
+		TSI108_CPU_STRIDE,
+		TSI108_CPU_IPI_DISPATCH_0,
+		TSI108_CPU_IPI_DISPATCH_STRIDE,
+		TSI108_CPU_CURRENT_TASK_PRI,
+		TSI108_CPU_WHOAMI,
+		TSI108_CPU_INTACK,
+		TSI108_CPU_EOI,
+
+		TSI108_IRQ_BASE,
+		TSI108_IRQ_STRIDE,
+		TSI108_IRQ_VECTOR_PRI,
+		TSI108_VECPRI_VECTOR_MASK,
+		TSI108_VECPRI_POLARITY_POSITIVE,
+		TSI108_VECPRI_POLARITY_NEGATIVE,
+		TSI108_VECPRI_SENSE_LEVEL,
+		TSI108_VECPRI_SENSE_EDGE,
+		TSI108_VECPRI_POLARITY_MASK,
+		TSI108_VECPRI_SENSE_MASK,
+		TSI108_IRQ_DESTINATION
+	},
+};
+
+#define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name]
+
+#else /* CONFIG_MPIC_WEIRD */
+
+#define MPIC_INFO(name) MPIC_##name
+
+#endif /* CONFIG_MPIC_WEIRD */
+
 /*
  * Register accessor functions
  */
@@ -80,7 +168,8 @@
 static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi)
 {
 	unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0;
-	unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10);
+	unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) +
+			      (ipi * MPIC_INFO(GREG_IPI_STRIDE));
 
 	if (mpic->flags & MPIC_BROKEN_IPI)
 		be = !be;
@@ -89,7 +178,8 @@
 
 static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value)
 {
-	unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10);
+	unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) +
+			      (ipi * MPIC_INFO(GREG_IPI_STRIDE));
 
 	_mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value);
 }
@@ -120,7 +210,7 @@
 	unsigned int	idx = src_no & mpic->isu_mask;
 
 	return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu],
-			  reg + (idx * MPIC_IRQ_STRIDE));
+			  reg + (idx * MPIC_INFO(IRQ_STRIDE)));
 }
 
 static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
@@ -130,7 +220,7 @@
 	unsigned int	idx = src_no & mpic->isu_mask;
 
 	_mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu],
-		    reg + (idx * MPIC_IRQ_STRIDE), value);
+		    reg + (idx * MPIC_INFO(IRQ_STRIDE)), value);
 }
 
 #define mpic_read(b,r)		_mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r))
@@ -156,8 +246,8 @@
 {
 	u32 r;
 
-	mpic_write(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0, MPIC_VECPRI_MASK);
-	r = mpic_read(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0);
+	mpic_write(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0), MPIC_VECPRI_MASK);
+	r = mpic_read(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0));
 
 	if (r == le32_to_cpu(MPIC_VECPRI_MASK)) {
 		printk(KERN_INFO "mpic: Detected reversed IPI registers\n");
@@ -394,8 +484,8 @@
 /* Send an EOI */
 static inline void mpic_eoi(struct mpic *mpic)
 {
-	mpic_cpu_write(MPIC_CPU_EOI, 0);
-	(void)mpic_cpu_read(MPIC_CPU_WHOAMI);
+	mpic_cpu_write(MPIC_INFO(CPU_EOI), 0);
+	(void)mpic_cpu_read(MPIC_INFO(CPU_WHOAMI));
 }
 
 #ifdef CONFIG_SMP
@@ -419,8 +509,8 @@
 
 	DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
 
-	mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
-		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) &
+	mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
+		       mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) &
 		       ~MPIC_VECPRI_MASK);
 	/* make sure mask gets to controller before we return to user */
 	do {
@@ -428,7 +518,7 @@
 			printk(KERN_ERR "mpic_enable_irq timeout\n");
 			break;
 		}
-	} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
+	} while(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK);
 }
 
 static void mpic_mask_irq(unsigned int irq)
@@ -439,8 +529,8 @@
 
 	DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
 
-	mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
-		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) |
+	mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
+		       mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) |
 		       MPIC_VECPRI_MASK);
 
 	/* make sure mask gets to controller before we return to user */
@@ -449,7 +539,7 @@
 			printk(KERN_ERR "mpic_enable_irq timeout\n");
 			break;
 		}
-	} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
+	} while(!(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK));
 }
 
 static void mpic_end_irq(unsigned int irq)
@@ -560,24 +650,28 @@
 
 	cpus_and(tmp, cpumask, cpu_online_map);
 
-	mpic_irq_write(src, MPIC_IRQ_DESTINATION,
+	mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
 		       mpic_physmask(cpus_addr(tmp)[0]));	
 }
 
-static unsigned int mpic_type_to_vecpri(unsigned int type)
+static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
 {
 	/* Now convert sense value */
 	switch(type & IRQ_TYPE_SENSE_MASK) {
 	case IRQ_TYPE_EDGE_RISING:
-		return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_POSITIVE;
+		return MPIC_INFO(VECPRI_SENSE_EDGE) |
+		       MPIC_INFO(VECPRI_POLARITY_POSITIVE);
 	case IRQ_TYPE_EDGE_FALLING:
 	case IRQ_TYPE_EDGE_BOTH:
-		return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_NEGATIVE;
+		return MPIC_INFO(VECPRI_SENSE_EDGE) |
+		       MPIC_INFO(VECPRI_POLARITY_NEGATIVE);
 	case IRQ_TYPE_LEVEL_HIGH:
-		return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_POSITIVE;
+		return MPIC_INFO(VECPRI_SENSE_LEVEL) |
+		       MPIC_INFO(VECPRI_POLARITY_POSITIVE);
 	case IRQ_TYPE_LEVEL_LOW:
 	default:
-		return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_NEGATIVE;
+		return MPIC_INFO(VECPRI_SENSE_LEVEL) |
+		       MPIC_INFO(VECPRI_POLARITY_NEGATIVE);
 	}
 }
 
@@ -609,13 +703,14 @@
 		vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
 			MPIC_VECPRI_SENSE_EDGE;
 	else
-		vecpri = mpic_type_to_vecpri(flow_type);
+		vecpri = mpic_type_to_vecpri(mpic, flow_type);
 
-	vold = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
-	vnew = vold & ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK);
+	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
+	vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) |
+			MPIC_INFO(VECPRI_SENSE_MASK));
 	vnew |= vecpri;
 	if (vold != vnew)
-		mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, vnew);
+		mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew);
 
 	return 0;
 }
@@ -798,17 +893,22 @@
 	mpic->irq_count = irq_count;
 	mpic->num_sources = 0; /* so far */
 
+#ifdef CONFIG_MPIC_WEIRD
+	mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)];
+#endif
+
 	/* Map the global registers */
-	mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
-	mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
+	mpic->gregs = ioremap(phys_addr + MPIC_INFO(GREG_BASE), 0x1000);
+	mpic->tmregs = mpic->gregs +
+		       ((MPIC_INFO(TIMER_BASE) - MPIC_INFO(GREG_BASE)) >> 2);
 	BUG_ON(mpic->gregs == NULL);
 
 	/* Reset */
 	if (flags & MPIC_WANTS_RESET) {
-		mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0,
-			   mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+		mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
 			   | MPIC_GREG_GCONF_RESET);
-		while( mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+		while( mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
 		       & MPIC_GREG_GCONF_RESET)
 			mb();
 	}
@@ -817,7 +917,7 @@
 	 * MPICs, num sources as well. On ISU MPICs, sources are counted
 	 * as ISUs are added
 	 */
-	reg = mpic_read(mpic->gregs, MPIC_GREG_FEATURE_0);
+	reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
 	mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
 	if (isu_size == 0)
@@ -826,16 +926,16 @@
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
-		mpic->cpuregs[i] = ioremap(phys_addr + MPIC_CPU_BASE +
-					   i * MPIC_CPU_STRIDE, 0x1000);
+		mpic->cpuregs[i] = ioremap(phys_addr + MPIC_INFO(CPU_BASE) +
+					   i * MPIC_INFO(CPU_STRIDE), 0x1000);
 		BUG_ON(mpic->cpuregs[i] == NULL);
 	}
 
 	/* Initialize main ISU if none provided */
 	if (mpic->isu_size == 0) {
 		mpic->isu_size = mpic->num_sources;
-		mpic->isus[0] = ioremap(phys_addr + MPIC_IRQ_BASE,
-					MPIC_IRQ_STRIDE * mpic->isu_size);
+		mpic->isus[0] = ioremap(phys_addr + MPIC_INFO(IRQ_BASE),
+					MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 		BUG_ON(mpic->isus[0] == NULL);
 	}
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -879,7 +979,8 @@
 
 	BUG_ON(isu_num >= MPIC_MAX_ISU);
 
-	mpic->isus[isu_num] = ioremap(phys_addr, MPIC_IRQ_STRIDE * mpic->isu_size);
+	mpic->isus[isu_num] = ioremap(phys_addr,
+				      MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 	if ((isu_first + mpic->isu_size) > mpic->num_sources)
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
@@ -904,14 +1005,16 @@
 	printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
 
 	/* Set current processor priority to max */
-	mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
 
 	/* Initialize timers: just disable them all */
 	for (i = 0; i < 4; i++) {
 		mpic_write(mpic->tmregs,
-			   i * MPIC_TIMER_STRIDE + MPIC_TIMER_DESTINATION, 0);
+			   i * MPIC_INFO(TIMER_STRIDE) +
+			   MPIC_INFO(TIMER_DESTINATION), 0);
 		mpic_write(mpic->tmregs,
-			   i * MPIC_TIMER_STRIDE + MPIC_TIMER_VECTOR_PRI,
+			   i * MPIC_INFO(TIMER_STRIDE) +
+			   MPIC_INFO(TIMER_VECTOR_PRI),
 			   MPIC_VECPRI_MASK |
 			   (MPIC_VEC_TIMER_0 + i));
 	}
@@ -940,21 +1043,22 @@
 			(8 << MPIC_VECPRI_PRIORITY_SHIFT);
 		
 		/* init hw */
-		mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
-		mpic_irq_write(i, MPIC_IRQ_DESTINATION,
+		mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
+		mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
 			       1 << hard_smp_processor_id());
 	}
 	
 	/* Init spurrious vector */
-	mpic_write(mpic->gregs, MPIC_GREG_SPURIOUS, MPIC_VEC_SPURRIOUS);
+	mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), MPIC_VEC_SPURRIOUS);
 
-	/* Disable 8259 passthrough */
-	mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0,
-		   mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
-		   | MPIC_GREG_GCONF_8259_PTHROU_DIS);
+	/* Disable 8259 passthrough, if supported */
+	if (!(mpic->flags & MPIC_NO_PTHROU_DIS))
+		mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
+			   | MPIC_GREG_GCONF_8259_PTHROU_DIS);
 
 	/* Set current processor priority to 0 */
-	mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0);
+	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0);
 }
 
 void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
@@ -997,9 +1101,9 @@
 		mpic_ipi_write(src - MPIC_VEC_IPI_0,
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	} else {
-		reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI)
+		reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI))
 			& ~MPIC_VECPRI_PRIORITY_MASK;
-		mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
+		mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	}
 	spin_unlock_irqrestore(&mpic_lock, flags);
@@ -1017,7 +1121,7 @@
 	if (is_ipi)
 		reg = mpic_ipi_read(src = MPIC_VEC_IPI_0);
 	else
-		reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
+		reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
 	spin_unlock_irqrestore(&mpic_lock, flags);
 	return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
 }
@@ -1043,12 +1147,12 @@
  	 */
 	if (distribute_irqs) {
 	 	for (i = 0; i < mpic->num_sources ; i++)
-			mpic_irq_write(i, MPIC_IRQ_DESTINATION,
-				mpic_irq_read(i, MPIC_IRQ_DESTINATION) | msk);
+			mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
+				mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk);
 	}
 
 	/* Set current processor priority to 0 */
-	mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0);
+	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0);
 
 	spin_unlock_irqrestore(&mpic_lock, flags);
 #endif /* CONFIG_SMP */
@@ -1058,7 +1162,7 @@
 {
 	struct mpic *mpic = mpic_primary;
 
-	return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI);
+	return mpic_cpu_read(MPIC_INFO(CPU_CURRENT_TASK_PRI));
 }
 
 void mpic_cpu_set_priority(int prio)
@@ -1066,7 +1170,7 @@
 	struct mpic *mpic = mpic_primary;
 
 	prio &= MPIC_CPU_TASKPRI_MASK;
-	mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio);
+	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio);
 }
 
 /*
@@ -1088,11 +1192,11 @@
 
 	/* let the mpic know we don't want intrs.  */
 	for (i = 0; i < mpic->num_sources ; i++)
-		mpic_irq_write(i, MPIC_IRQ_DESTINATION,
-			mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk);
+		mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
+			mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) & ~msk);
 
 	/* Set current processor priority to max */
-	mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
 
 	spin_unlock_irqrestore(&mpic_lock, flags);
 }
@@ -1108,7 +1212,8 @@
 	DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
 #endif
 
-	mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10,
+	mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
+		       ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE),
 		       mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
 }
 
@@ -1116,7 +1221,7 @@
 {
 	u32 src;
 
-	src = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+	src = mpic_cpu_read(MPIC_INFO(CPU_INTACK)) & MPIC_INFO(VECPRI_VECTOR_MASK);
 #ifdef DEBUG_LOW
 	DBG("%s: get_one_irq(): %d\n", mpic->name, src);
 #endif
diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c
index 1576758..d0cf3f8 100644
--- a/arch/ppc/kernel/smp-tbsync.c
+++ b/arch/ppc/kernel/smp-tbsync.c
@@ -47,8 +47,9 @@
 smp_generic_take_timebase( void )
 {
 	int cmd, tbl, tbu;
+	unsigned long flags;
 
-	local_irq_disable();
+	local_irq_save(flags);
 	while( !running )
 		;
 	rmb();
@@ -64,7 +65,7 @@
 		tbu = tbsync->tbu;
 		tbsync->ack = 0;
 		if( cmd == kExit )
-			return;
+			break;
 
 		if( cmd == kSetAndTest ) {
 			while( tbsync->handshake )
@@ -77,7 +78,7 @@
 		}
 		enter_contest( tbsync->mark, -1 );
 	}
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 static int __devinit
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 2497bbc..dca23f2 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -93,7 +93,7 @@
 endif
 obj-$(CONFIG_RAPIDIO)		+= ppc85xx_rio.o
 obj-$(CONFIG_83xx)		+= ppc83xx_setup.o ppc_sys.o \
-					mpc83xx_sys.o mpc83xx_devices.o
+					mpc83xx_sys.o mpc83xx_devices.o ipic.o
 ifeq ($(CONFIG_83xx),y)
 obj-$(CONFIG_PCI)		+= pci_auto.o
 endif
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
new file mode 100644
index 0000000..46801f5
--- /dev/null
+++ b/arch/ppc/syslib/ipic.c
@@ -0,0 +1,646 @@
+/*
+ * include/asm-ppc/ipic.c
+ *
+ * IPIC routines implementations.
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/ipic.h>
+#include <asm/mpc83xx.h>
+
+#include "ipic.h"
+
+static struct ipic p_ipic;
+static struct ipic * primary_ipic;
+
+static struct ipic_info ipic_info[] = {
+	[9] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 24,
+		.prio_mask = 0,
+	},
+	[10] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 25,
+		.prio_mask = 1,
+	},
+	[11] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 26,
+		.prio_mask = 2,
+	},
+	[14] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 29,
+		.prio_mask = 5,
+	},
+	[15] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 30,
+		.prio_mask = 6,
+	},
+	[16] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_D,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 31,
+		.prio_mask = 7,
+	},
+	[17] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 1,
+		.prio_mask = 5,
+	},
+	[18] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 2,
+		.prio_mask = 6,
+	},
+	[19] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 3,
+		.prio_mask = 7,
+	},
+	[20] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 4,
+		.prio_mask = 4,
+	},
+	[21] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 5,
+		.prio_mask = 5,
+	},
+	[22] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 6,
+		.prio_mask = 6,
+	},
+	[23] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SEFCR,
+		.bit	= 7,
+		.prio_mask = 7,
+	},
+	[32] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 0,
+		.prio_mask = 0,
+	},
+	[33] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 1,
+		.prio_mask = 1,
+	},
+	[34] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 2,
+		.prio_mask = 2,
+	},
+	[35] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 3,
+		.prio_mask = 3,
+	},
+	[36] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 4,
+		.prio_mask = 4,
+	},
+	[37] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 5,
+		.prio_mask = 5,
+	},
+	[38] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 6,
+		.prio_mask = 6,
+	},
+	[39] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_H,
+		.prio	= IPIC_SIPRR_A,
+		.force	= IPIC_SIFCR_H,
+		.bit	= 7,
+		.prio_mask = 7,
+	},
+	[48] = {
+		.pend	= IPIC_SEPNR,
+		.mask	= IPIC_SEMSR,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SEFCR,
+		.bit	= 0,
+		.prio_mask = 4,
+	},
+	[64] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 0,
+		.prio_mask = 0,
+	},
+	[65] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 1,
+		.prio_mask = 1,
+	},
+	[66] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 2,
+		.prio_mask = 2,
+	},
+	[67] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_A,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 3,
+		.prio_mask = 3,
+	},
+	[68] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 4,
+		.prio_mask = 0,
+	},
+	[69] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 5,
+		.prio_mask = 1,
+	},
+	[70] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 6,
+		.prio_mask = 2,
+	},
+	[71] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= IPIC_SMPRR_B,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 7,
+		.prio_mask = 3,
+	},
+	[72] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 8,
+	},
+	[73] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 9,
+	},
+	[74] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 10,
+	},
+	[75] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 11,
+	},
+	[76] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 12,
+	},
+	[77] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 13,
+	},
+	[78] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 14,
+	},
+	[79] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 15,
+	},
+	[80] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 16,
+	},
+	[84] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 20,
+	},
+	[85] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 21,
+	},
+	[90] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 26,
+	},
+	[91] = {
+		.pend	= IPIC_SIPNR_H,
+		.mask	= IPIC_SIMSR_L,
+		.prio	= 0,
+		.force	= IPIC_SIFCR_L,
+		.bit	= 27,
+	},
+};
+
+static inline u32 ipic_read(volatile u32 __iomem *base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 value)
+{
+	out_be32(base + (reg >> 2), value);
+}
+
+static inline struct ipic * ipic_from_irq(unsigned int irq)
+{
+	return primary_ipic;
+}
+
+static void ipic_enable_irq(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, ipic_info[src].mask);
+	temp |= (1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+}
+
+static void ipic_disable_irq(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, ipic_info[src].mask);
+	temp &= ~(1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].mask, temp);
+}
+
+static void ipic_disable_irq_and_ack(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	ipic_disable_irq(irq);
+
+	temp = ipic_read(ipic->regs, ipic_info[src].pend);
+	temp |= (1 << (31 - ipic_info[src].bit));
+	ipic_write(ipic->regs, ipic_info[src].pend, temp);
+}
+
+static void ipic_end_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		ipic_enable_irq(irq);
+}
+
+struct hw_interrupt_type ipic = {
+	.typename = " IPIC  ",
+	.enable = ipic_enable_irq,
+	.disable = ipic_disable_irq,
+	.ack = ipic_disable_irq_and_ack,
+	.end = ipic_end_irq,
+};
+
+void __init ipic_init(phys_addr_t phys_addr,
+		unsigned int flags,
+		unsigned int irq_offset,
+		unsigned char *senses,
+		unsigned int senses_count)
+{
+	u32 i, temp = 0;
+
+	primary_ipic = &p_ipic;
+	primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE);
+
+	primary_ipic->irq_offset = irq_offset;
+
+	ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0);
+
+	/* default priority scheme is grouped. If spread mode is required
+	 * configure SICFR accordingly */
+	if (flags & IPIC_SPREADMODE_GRP_A)
+		temp |= SICFR_IPSA;
+	if (flags & IPIC_SPREADMODE_GRP_D)
+		temp |= SICFR_IPSD;
+	if (flags & IPIC_SPREADMODE_MIX_A)
+		temp |= SICFR_MPSA;
+	if (flags & IPIC_SPREADMODE_MIX_B)
+		temp |= SICFR_MPSB;
+
+	ipic_write(primary_ipic->regs, IPIC_SICNR, temp);
+
+	/* handle MCP route */
+	temp = 0;
+	if (flags & IPIC_DISABLE_MCP_OUT)
+		temp = SERCR_MCPR;
+	ipic_write(primary_ipic->regs, IPIC_SERCR, temp);
+
+	/* handle routing of IRQ0 to MCP */
+	temp = ipic_read(primary_ipic->regs, IPIC_SEMSR);
+
+	if (flags & IPIC_IRQ0_MCP)
+		temp |= SEMSR_SIRQ0;
+	else
+		temp &= ~SEMSR_SIRQ0;
+
+	ipic_write(primary_ipic->regs, IPIC_SEMSR, temp);
+
+	for (i = 0 ; i < NR_IPIC_INTS ; i++) {
+		irq_desc[i+irq_offset].chip = &ipic;
+		irq_desc[i+irq_offset].status = IRQ_LEVEL;
+	}
+
+	temp = 0;
+	for (i = 0 ; i < senses_count ; i++) {
+		if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
+			temp |= 1 << (15 - i);
+			if (i != 0)
+				irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
+			else
+				irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0;
+		}
+	}
+	ipic_write(primary_ipic->regs, IPIC_SECNR, temp);
+
+	printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS,
+			senses_count, primary_ipic->regs);
+}
+
+int ipic_set_priority(unsigned int irq, unsigned int priority)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	if (priority > 7)
+		return -EINVAL;
+	if (src > 127)
+		return -EINVAL;
+	if (ipic_info[src].prio == 0)
+		return -EINVAL;
+
+	temp = ipic_read(ipic->regs, ipic_info[src].prio);
+
+	if (priority < 4) {
+		temp &= ~(0x7 << (20 + (3 - priority) * 3));
+		temp |= ipic_info[src].prio_mask << (20 + (3 - priority) * 3);
+	} else {
+		temp &= ~(0x7 << (4 + (7 - priority) * 3));
+		temp |= ipic_info[src].prio_mask << (4 + (7 - priority) * 3);
+	}
+
+	ipic_write(ipic->regs, ipic_info[src].prio, temp);
+
+	return 0;
+}
+
+void ipic_set_highest_priority(unsigned int irq)
+{
+	struct ipic *ipic = ipic_from_irq(irq);
+	unsigned int src = irq - ipic->irq_offset;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, IPIC_SICFR);
+
+	/* clear and set HPI */
+	temp &= 0x7f000000;
+	temp |= (src & 0x7f) << 24;
+
+	ipic_write(ipic->regs, IPIC_SICFR, temp);
+}
+
+void ipic_set_default_priority(void)
+{
+	ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0);
+	ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1);
+	ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2);
+	ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3);
+	ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4);
+	ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5);
+	ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6);
+	ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7);
+
+	ipic_set_priority(MPC83xx_IRQ_UART1, 0);
+	ipic_set_priority(MPC83xx_IRQ_UART2, 1);
+	ipic_set_priority(MPC83xx_IRQ_SEC2, 2);
+	ipic_set_priority(MPC83xx_IRQ_IIC1, 5);
+	ipic_set_priority(MPC83xx_IRQ_IIC2, 6);
+	ipic_set_priority(MPC83xx_IRQ_SPI, 7);
+	ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0);
+	ipic_set_priority(MPC83xx_IRQ_PIT, 1);
+	ipic_set_priority(MPC83xx_IRQ_PCI1, 2);
+	ipic_set_priority(MPC83xx_IRQ_PCI2, 3);
+	ipic_set_priority(MPC83xx_IRQ_EXT0, 4);
+	ipic_set_priority(MPC83xx_IRQ_EXT1, 5);
+	ipic_set_priority(MPC83xx_IRQ_EXT2, 6);
+	ipic_set_priority(MPC83xx_IRQ_EXT3, 7);
+	ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0);
+	ipic_set_priority(MPC83xx_IRQ_MU, 1);
+	ipic_set_priority(MPC83xx_IRQ_SBA, 2);
+	ipic_set_priority(MPC83xx_IRQ_DMA, 3);
+	ipic_set_priority(MPC83xx_IRQ_EXT4, 4);
+	ipic_set_priority(MPC83xx_IRQ_EXT5, 5);
+	ipic_set_priority(MPC83xx_IRQ_EXT6, 6);
+	ipic_set_priority(MPC83xx_IRQ_EXT7, 7);
+}
+
+void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq)
+{
+	struct ipic *ipic = primary_ipic;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, IPIC_SERMR);
+	temp |= (1 << (31 - mcp_irq));
+	ipic_write(ipic->regs, IPIC_SERMR, temp);
+}
+
+void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq)
+{
+	struct ipic *ipic = primary_ipic;
+	u32 temp;
+
+	temp = ipic_read(ipic->regs, IPIC_SERMR);
+	temp &= (1 << (31 - mcp_irq));
+	ipic_write(ipic->regs, IPIC_SERMR, temp);
+}
+
+u32 ipic_get_mcp_status(void)
+{
+	return ipic_read(primary_ipic->regs, IPIC_SERMR);
+}
+
+void ipic_clear_mcp_status(u32 mask)
+{
+	ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
+}
+
+/* Return an interrupt vector or -1 if no interrupt is pending. */
+int ipic_get_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f;
+
+	if (irq == 0)    /* 0 --> no irq is pending */
+		irq = -1;
+
+	return irq;
+}
+
+static struct sysdev_class ipic_sysclass = {
+	set_kset_name("ipic"),
+};
+
+static struct sys_device device_ipic = {
+	.id		= 0,
+	.cls		= &ipic_sysclass,
+};
+
+static int __init init_ipic_sysfs(void)
+{
+	int rc;
+
+	if (!primary_ipic->regs)
+		return -ENODEV;
+	printk(KERN_DEBUG "Registering ipic with sysfs...\n");
+
+	rc = sysdev_class_register(&ipic_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering ipic sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_ipic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering ipic sys device\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_ipic_sysfs);
diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h
new file mode 100644
index 0000000..a60c9d1
--- /dev/null
+++ b/arch/ppc/syslib/ipic.h
@@ -0,0 +1,47 @@
+/*
+ * IPIC private definitions and structure.
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __IPIC_H__
+#define __IPIC_H__
+
+#include <asm/ipic.h>
+
+#define MPC83xx_IPIC_SIZE	(0x00100)
+
+/* System Global Interrupt Configuration Register */
+#define	SICFR_IPSA	0x00010000
+#define	SICFR_IPSD	0x00080000
+#define	SICFR_MPSA	0x00200000
+#define	SICFR_MPSB	0x00400000
+
+/* System External Interrupt Mask Register */
+#define	SEMSR_SIRQ0	0x00008000
+
+/* System Error Control Register */
+#define SERCR_MCPR	0x00000001
+
+struct ipic {
+	volatile u32 __iomem	*regs;
+	unsigned int		irq_offset;
+};
+
+struct ipic_info {
+	u8	pend;		/* pending register offset from base */
+	u8	mask;		/* mask register offset from base */
+	u8	prio;		/* priority register offset from base */
+	u8	force;		/* force register offset from base */
+	u8	bit;		/* register bit position (as per doc)
+				   bit mask = 1 << (31 - bit) */
+	u8	prio_mask;	/* priority mask value */
+};
+
+#endif /* __IPIC_H__ */
diff --git a/arch/s390/lib/uaccess.S b/arch/s390/lib/uaccess.S
index 5d59e262..8372752 100644
--- a/arch/s390/lib/uaccess.S
+++ b/arch/s390/lib/uaccess.S
@@ -88,30 +88,31 @@
         .globl __copy_in_user_asm
 	# %r2 = from, %r3 = n, %r4 = to
 __copy_in_user_asm:
+	ahi	%r3,-1
+	jo	6f
 	sacf	256
-	bras	1,1f
-	mvc	0(1,%r4),0(%r2)
-0:	mvc	0(256,%r4),0(%r2)
-	la	%r2,256(%r2)
-	la	%r4,256(%r4)
-1:	ahi	%r3,-256
-	jnm	0b
-2:	ex	%r3,0(%r1)
-	sacf	0
-	slr	%r2,%r2
-	br	14
-3:	mvc	0(1,%r4),0(%r2)
+	bras	%r1,4f
+0:	ahi	%r3,257
+1:	mvc	0(1,%r4),0(%r2)
 	la	%r2,1(%r2)
 	la	%r4,1(%r4)
 	ahi	%r3,-1
+	jnz	1b
+2:	lr	%r2,%r3
+	br	%r14
+3:	mvc	0(256,%r4),0(%r2)
+	la	%r2,256(%r2)
+	la	%r4,256(%r4)
+4:	ahi	%r3,-256
 	jnm	3b
-4:	lr	%r2,%r3
+5:	ex	%r3,4(%r1)
 	sacf	0
+6:	slr	%r2,%r2
 	br	%r14
         .section __ex_table,"a"
-	.long	0b,3b
-	.long	2b,3b
-	.long	3b,4b
+	.long	1b,2b
+	.long	3b,0b
+	.long	5b,0b
         .previous
 
         .align 4
diff --git a/arch/s390/lib/uaccess64.S b/arch/s390/lib/uaccess64.S
index 19b41a3..1f755be 100644
--- a/arch/s390/lib/uaccess64.S
+++ b/arch/s390/lib/uaccess64.S
@@ -88,30 +88,31 @@
         .globl __copy_in_user_asm
 	# %r2 = from, %r3 = n, %r4 = to
 __copy_in_user_asm:
+	aghi	%r3,-1
+	jo	6f
 	sacf	256
-	bras	1,1f
-	mvc	0(1,%r4),0(%r2)
-0:	mvc	0(256,%r4),0(%r2)
-	la	%r2,256(%r2)
-	la	%r4,256(%r4)
-1:	aghi	%r3,-256
-	jnm	0b
-2:	ex	%r3,0(%r1)
-	sacf	0
-	slgr	%r2,%r2
-	br	14
-3:	mvc	0(1,%r4),0(%r2)
+	bras	%r1,4f
+0:	aghi	%r3,257
+1:	mvc	0(1,%r4),0(%r2)
 	la	%r2,1(%r2)
 	la	%r4,1(%r4)
 	aghi	%r3,-1
-	jnm	3b
-4:	lgr	%r2,%r3
-	sacf	0
+	jnz	1b
+2:	lgr	%r2,%r3
 	br	%r14
+3:	mvc	0(256,%r4),0(%r2)
+	la	%r2,256(%r2)
+	la	%r4,256(%r4)
+4:	aghi	%r3,-256
+	jnm	3b
+5:	ex	%r3,4(%r1)
+	sacf	0
+6:	slgr	%r2,%r2
+	br	14
         .section __ex_table,"a"
-	.quad	0b,3b
-	.quad	2b,3b
-	.quad	3b,4b
+	.quad	1b,2b
+	.quad	3b,0b
+	.quad	5b,0b
         .previous
 
         .align 4
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index 8cb0620..af9d81d 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -69,6 +69,8 @@
 		} else
 			offset += PAGE_SIZE;
 
+		if (pte_write(entry))
+			entry = pte_mkdirty(entry);
 		do {
 			BUG_ON(!pte_none(*pte));
 			set_pte_at(mm, address, pte, entry);
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 840d5d9..5fb9707 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc2
-# Tue Jul 18 17:13:20 2006
+# Linux kernel version: 2.6.18-rc4
+# Thu Aug 24 21:05:55 2006
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -201,7 +201,7 @@
 CONFIG_ACPI_NUMA=y
 # CONFIG_ACPI_ASUS is not set
 # CONFIG_ACPI_IBM is not set
-CONFIG_ACPI_TOSHIBA=y
+# CONFIG_ACPI_TOSHIBA is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
@@ -216,7 +216,7 @@
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
@@ -495,8 +495,9 @@
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
 
 #
@@ -512,7 +513,7 @@
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
 
 #
 # SCSI low-level drivers
@@ -538,7 +539,7 @@
 CONFIG_MEGARAID_SAS=y
 CONFIG_SCSI_SATA=y
 CONFIG_SCSI_SATA_AHCI=y
-# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_SCSI_SATA_SVW=y
 CONFIG_SCSI_ATA_PIIX=y
 # CONFIG_SCSI_SATA_MV is not set
 CONFIG_SCSI_SATA_NV=y
@@ -589,7 +590,7 @@
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 # CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_SAS=y
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -675,7 +676,7 @@
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
+CONFIG_B44=y
 CONFIG_FORCEDETH=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
@@ -712,7 +713,7 @@
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
 
 #
 # Ethernet (10000 Mbit)
@@ -842,44 +843,7 @@
 #
 # Watchdog Cards
 #
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I8XX_TCO is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_INTEL=y
 CONFIG_HW_RANDOM_AMD=y
@@ -1056,6 +1020,7 @@
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
 CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1301,7 +1266,7 @@
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
@@ -1494,4 +1459,5 @@
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c
index a9dc0f3..2fd5a67 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@@ -73,39 +73,44 @@
  * Dumping its extra ELF program headers includes all the other information
  * a debugger needs to easily find how the vsyscall DSO was being used.
  */
-#define ELF_CORE_EXTRA_PHDRS		(VSYSCALL32_EHDR->e_phnum)
+#define ELF_CORE_EXTRA_PHDRS	(find_vma(current->mm, VSYSCALL32_BASE) ?     \
+    (VSYSCALL32_EHDR->e_phnum) : 0)
 #define ELF_CORE_WRITE_EXTRA_PHDRS					      \
 do {									      \
-	const struct elf32_phdr *const vsyscall_phdrs =			      \
-		(const struct elf32_phdr *) (VSYSCALL32_BASE		      \
-					   + VSYSCALL32_EHDR->e_phoff);	      \
-	int i;								      \
-	Elf32_Off ofs = 0;						      \
-	for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) {		      \
-		struct elf32_phdr phdr = vsyscall_phdrs[i];		      \
-		if (phdr.p_type == PT_LOAD) {				      \
-			BUG_ON(ofs != 0);				      \
-			ofs = phdr.p_offset = offset;			      \
-			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
-			phdr.p_filesz = phdr.p_memsz;			      \
-			offset += phdr.p_filesz;			      \
+	if (find_vma(current->mm, VSYSCALL32_BASE)) { 			      \
+		const struct elf32_phdr *const vsyscall_phdrs =		      \
+			(const struct elf32_phdr *) (VSYSCALL32_BASE	      \
+						   + VSYSCALL32_EHDR->e_phoff);\
+		int i;							      \
+		Elf32_Off ofs = 0;					      \
+		for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) {	      \
+			struct elf32_phdr phdr = vsyscall_phdrs[i];	      \
+			if (phdr.p_type == PT_LOAD) {			      \
+				BUG_ON(ofs != 0);			      \
+				ofs = phdr.p_offset = offset;		      \
+				phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);      \
+				phdr.p_filesz = phdr.p_memsz;		      \
+				offset += phdr.p_filesz;		      \
+			}						      \
+			else						      \
+				phdr.p_offset += ofs;			      \
+			phdr.p_paddr = 0; /* match other core phdrs */	      \
+			DUMP_WRITE(&phdr, sizeof(phdr));		      \
 		}							      \
-		else							      \
-			phdr.p_offset += ofs;				      \
-		phdr.p_paddr = 0; /* match other core phdrs */		      \
-		DUMP_WRITE(&phdr, sizeof(phdr));			      \
 	}								      \
 } while (0)
 #define ELF_CORE_WRITE_EXTRA_DATA					      \
 do {									      \
-	const struct elf32_phdr *const vsyscall_phdrs =			      \
-		(const struct elf32_phdr *) (VSYSCALL32_BASE		      \
-					   + VSYSCALL32_EHDR->e_phoff);	      \
-	int i;								      \
-	for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) {		      \
-		if (vsyscall_phdrs[i].p_type == PT_LOAD)		      \
-			DUMP_WRITE((void *) (u64) vsyscall_phdrs[i].p_vaddr,	      \
-				   PAGE_ALIGN(vsyscall_phdrs[i].p_memsz));    \
+	if (find_vma(current->mm, VSYSCALL32_BASE)) { 			      \
+		const struct elf32_phdr *const vsyscall_phdrs =		      \
+			(const struct elf32_phdr *) (VSYSCALL32_BASE	      \
+						   + VSYSCALL32_EHDR->e_phoff);      \
+		int i;							      \
+		for (i = 0; i < VSYSCALL32_EHDR->e_phnum; ++i) {	      \
+			if (vsyscall_phdrs[i].p_type == PT_LOAD)	      \
+				DUMP_WRITE((void *) (u64) vsyscall_phdrs[i].p_vaddr,\
+				    PAGE_ALIGN(vsyscall_phdrs[i].p_memsz));   \
+		}							      \
 	}								      \
 } while (0)
 
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index e56c2ad..764bf23 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -71,7 +71,11 @@
 #endif
 	/* kernel code + 640k memory hole (later should not be needed, but 
 	   be paranoid for now) */
-	if (last >= 640*1024 && addr < __pa_symbol(&_end)) { 
+	if (last >= 640*1024 && addr < 1024*1024) {
+		*addrp = 1024*1024;
+		return 1;
+	}
+	if (last >= __pa_symbol(&_text) && last < __pa_symbol(&_end)) {
 		*addrp = __pa_symbol(&_end);
 		return 1;
 	}
@@ -104,35 +108,6 @@
 	return 0;
 }
 
-/*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
-{
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/* if start is now at or beyond end, we're done, full coverage */
-		if (start >= end)
-			return 1; /* we're done */
-	}
-	return 0;
-}
-
 /* 
  * Find a free area in a specific range. 
  */ 
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 6f81042..aa8d893 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -973,6 +973,8 @@
 ENDPROC(kernel_thread)
 	
 child_rip:
+	pushq $0		# fake return address
+	CFI_STARTPROC
 	/*
 	 * Here we are in the child and the registers are set as they were
 	 * at kernel_thread() invocation in the parent.
@@ -983,6 +985,7 @@
 	# exit
 	xorl %edi, %edi
 	call do_exit
+	CFI_ENDPROC
 ENDPROC(child_rip)
 
 /*
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 6df05e6..c9739ca 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -191,6 +191,7 @@
 	 * jump
 	 */
 	movq	initial_code(%rip),%rax
+	pushq	$0		# fake return address
 	jmp	*%rax
 
 	/* SMP bootup changes these two */
diff --git a/arch/x86_64/kernel/init_task.c b/arch/x86_64/kernel/init_task.c
index ce31d90..3dc5854 100644
--- a/arch/x86_64/kernel/init_task.c
+++ b/arch/x86_64/kernel/init_task.c
@@ -46,4 +46,9 @@
  */ 
 DEFINE_PER_CPU(struct tss_struct, init_tss) ____cacheline_internodealigned_in_smp = INIT_TSS;
 
+/* Copies of the original ist values from the tss are only accessed during
+ * debugging, no special alignment required.
+ */
+DEFINE_PER_CPU(struct orig_ist, orig_ist);
+
 #define ALIGN_TO_4K __attribute__((section(".data.init_task")))
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 8a099ff..34afad7 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -521,8 +521,6 @@
 
 void __init setup_arch(char **cmdline_p)
 {
-	unsigned long kernel_end;
-
  	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
  	screen_info = SCREEN_INFO;
 	edid_info = EDID_INFO;
@@ -596,8 +594,8 @@
 				(table_end - table_start) << PAGE_SHIFT);
 
 	/* reserve kernel */
-	kernel_end = round_up(__pa_symbol(&_end),PAGE_SIZE);
-	reserve_bootmem_generic(HIGH_MEMORY, kernel_end - HIGH_MEMORY);
+	reserve_bootmem_generic(__pa_symbol(&_text),
+				__pa_symbol(&_end) - __pa_symbol(&_text));
 
 	/*
 	 * reserve physical page 0 - it's a special BIOS page on many boxes,
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index 6fe58a6..417de56 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -189,6 +189,7 @@
 {
 	int cpu = stack_smp_processor_id();
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
+	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
 	unsigned long v; 
 	char *estacks = NULL; 
 	struct task_struct *me;
@@ -256,7 +257,7 @@
 			estacks += EXCEPTION_STKSZ;
 			break;
 		}
-		t->ist[v] = (unsigned long)estacks;
+		orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks;
 	}
 
 	t->io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 14052f0..b124977 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -107,7 +107,11 @@
 }
 
 static int kstack_depth_to_print = 12;
+#ifdef CONFIG_STACK_UNWIND
 static int call_trace = 1;
+#else
+#define call_trace (-1)
+#endif
 
 #ifdef CONFIG_KALLSYMS
 # include <linux/kallsyms.h>
@@ -174,7 +178,7 @@
 			break;
 #endif
 		default:
-			end = per_cpu(init_tss, cpu).ist[k];
+			end = per_cpu(orig_ist, cpu).ist[k];
 			break;
 		}
 		/*
@@ -274,21 +278,21 @@
 			if (unwind_init_blocked(&info, tsk) == 0)
 				unw_ret = show_trace_unwind(&info, NULL);
 		}
-		if (unw_ret > 0 && !arch_unw_user_mode(&info)) {
-#ifdef CONFIG_STACK_UNWIND
-			unsigned long rip = info.regs.rip;
-			print_symbol("DWARF2 unwinder stuck at %s\n", rip);
-			if (call_trace == 1) {
-				printk("Leftover inexact backtrace:\n");
-				stack = (unsigned long *)info.regs.rsp;
-			} else if (call_trace > 1)
+		if (unw_ret > 0) {
+			if (call_trace == 1 && !arch_unw_user_mode(&info)) {
+				print_symbol("DWARF2 unwinder stuck at %s\n",
+					     UNW_PC(&info));
+				if ((long)UNW_SP(&info) < 0) {
+					printk("Leftover inexact backtrace:\n");
+					stack = (unsigned long *)UNW_SP(&info);
+				} else
+					printk("Full inexact backtrace again:\n");
+			} else if (call_trace >= 1)
 				return;
 			else
 				printk("Full inexact backtrace again:\n");
-#else
+		} else
 			printk("Inexact backtrace:\n");
-#endif
-		}
 	}
 
 	/*
@@ -1120,6 +1124,7 @@
 }
 __setup("kstack=", kstack_setup);
 
+#ifdef CONFIG_STACK_UNWIND
 static int __init call_trace_setup(char *s)
 {
 	if (strcmp(s, "old") == 0)
@@ -1133,3 +1138,4 @@
 	return 1;
 }
 __setup("call_trace=", call_trace_setup);
+#endif
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index 3c55c76..2d48a79 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
+#include <linux/dmi.h>
 #include <asm/e820.h>
 
 #include "pci.h"
@@ -164,11 +165,33 @@
 	}
 }
 
+static int disable_mcfg(struct dmi_system_id *d)
+{
+	printk("PCI: %s detected. Disabling MCFG.\n", d->ident);
+	pci_probe &= ~PCI_PROBE_MMCONF;
+	return 0;
+}
+
+static struct dmi_system_id __initdata dmi_bad_mcfg[] = {
+	/* Has broken MCFG table that makes the system hang when used */
+        {
+         .callback = disable_mcfg,
+         .ident = "Intel D3C5105 SDV",
+         .matches = {
+                     DMI_MATCH(DMI_BIOS_VENDOR, "Intel"),
+                     DMI_MATCH(DMI_BOARD_NAME, "D26928"),
+                     },
+         },
+         {}
+};
+
 void __init pci_mmcfg_init(void)
 {
 	int i;
 
-	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+	dmi_check_system(dmi_bad_mcfg);
+
+	if ((pci_probe & (PCI_PROBE_MMCONF|PCI_PROBE_MMCONF_FORCE)) == 0)
 		return;
 
 	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
@@ -177,15 +200,6 @@
 	    (pci_mmcfg_config[0].base_address == 0))
 		return;
 
-	if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
-			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
-			E820_RESERVED)) {
-		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
-				pci_mmcfg_config[0].base_address);
-		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
-		return;
-	}
-
 	/* RED-PEN i386 doesn't do _nocache right now */
 	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
 	if (pci_mmcfg_virt == NULL) {
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 5064d93..9aea23c 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -212,7 +212,7 @@
 	 */
 	case PTRACE_KILL:
 		ret = 0;
-		if (child->state == EXIT_ZOMBIE)	/* already dead */
+		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			break;
 		child->exit_code = SIGKILL;
 		child->ptrace &= ~PT_SINGLESTEP;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 5109fa3..ad1d706 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4177,6 +4177,11 @@
 	int i, unit, drive;
 	int err, dr;
 
+#if defined(CONFIG_PPC_MERGE)
+	if (check_legacy_ioport(FDC1))
+		return -ENODEV;
+#endif
+
 	raw_cmd = NULL;
 
 	for (dr = 0; dr < N_DRIVE; dr++) {
@@ -4234,13 +4239,6 @@
 	}
 
 	use_virtual_dma = can_use_virtual_dma & 1;
-#if defined(CONFIG_PPC_MERGE)
-	if (check_legacy_ioport(FDC1)) {
-		del_timer(&fd_timeout);
-		err = -ENODEV;
-		goto out_unreg_region;
-	}
-#endif
 	fdc_state[0].address = FDC1;
 	if (fdc_state[0].address == -1) {
 		del_timer(&fd_timeout);
diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c
index 5bb2234..39a7f68 100644
--- a/drivers/char/drm/radeon_state.c
+++ b/drivers/char/drm/radeon_state.c
@@ -175,6 +175,14 @@
 		}
 		break;
 
+	case R200_EMIT_VAP_CTL:{
+			RING_LOCALS;
+			BEGIN_RING(2);
+			OUT_RING_REG(RADEON_SE_TCL_STATE_FLUSH, 0);
+			ADVANCE_RING();
+		}
+		break;
+
 	case RADEON_EMIT_RB3D_COLORPITCH:
 	case RADEON_EMIT_RE_LINE_PATTERN:
 	case RADEON_EMIT_SE_LINE_WIDTH:
@@ -202,7 +210,6 @@
 	case R200_EMIT_TCL_LIGHT_MODEL_CTL_0:
 	case R200_EMIT_TFACTOR_0:
 	case R200_EMIT_VTX_FMT_0:
-	case R200_EMIT_VAP_CTL:
 	case R200_EMIT_MATRIX_SELECT_0:
 	case R200_EMIT_TEX_PROC_CTL_2:
 	case R200_EMIT_TCL_UCP_VERT_BLEND_CTL:
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 0aa5d60..843d34c 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3428,6 +3428,7 @@
 
 	rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC);
 	if (rv) {
+		rv->user = NULL;
 		rv->done = free_recv_msg;
 		atomic_inc(&recv_msg_inuse_count);
 	}
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index b2dbbdb..2f07b08 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -391,8 +391,8 @@
 #define DESC_LIST_SIZE 4096
 
 #define MASK_PARITY  BIT1
-#define MASK_FRAMING BIT2
-#define MASK_BREAK   BIT3
+#define MASK_FRAMING BIT0
+#define MASK_BREAK   BIT14
 #define MASK_OVERRUN BIT4
 
 #define GSR   0x00 /* global status */
@@ -1800,17 +1800,17 @@
 
 			stat = 0;
 
-			if ((status = *(p+1) & (BIT9 + BIT8))) {
-				if (status & BIT9)
+			if ((status = *(p+1) & (BIT1 + BIT0))) {
+				if (status & BIT1)
 					icount->parity++;
-				else if (status & BIT8)
+				else if (status & BIT0)
 					icount->frame++;
 				/* discard char if tty control flags say so */
 				if (status & info->ignore_status_mask)
 					continue;
-				if (status & BIT9)
+				if (status & BIT1)
 					stat = TTY_PARITY;
-				else if (status & BIT8)
+				else if (status & BIT0)
 					stat = TTY_FRAME;
 			}
 			if (tty) {
diff --git a/drivers/char/watchdog/sbc8360.c b/drivers/char/watchdog/sbc8360.c
index 1035be5..41fc6f8 100644
--- a/drivers/char/watchdog/sbc8360.c
+++ b/drivers/char/watchdog/sbc8360.c
@@ -200,7 +200,7 @@
 static int wd_multiplier = 2;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
-module_param(timeout, int, 27);
+module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout,
@@ -407,7 +407,7 @@
 MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>");
 MODULE_DESCRIPTION("SBC8360 watchdog driver");
 MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0");
+MODULE_VERSION("1.01");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 /* end of sbc8360.c */
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index e125032..d8a0d87 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -367,12 +367,13 @@
 static void __devinit
 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 {
+	void __iomem *virt_dma_base;
 	int num_ports = sizeof (ioc4_dma_regs_t);
 
 	printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
 	       dma_base, dma_base + num_ports - 1);
 
-	if (!request_region(dma_base, num_ports, hwif->name)) {
+	if (!request_mem_region(dma_base, num_ports, hwif->name)) {
 		printk(KERN_ERR
 		       "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
 		       "ALREADY in use\n",
@@ -381,13 +382,21 @@
 		goto dma_alloc_failure;
 	}
 
-	hwif->dma_base = dma_base;
+	virt_dma_base = ioremap(dma_base, num_ports);
+	if (virt_dma_base == NULL) {
+		printk(KERN_ERR
+		       "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
+		       __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
+		goto dma_remap_failure;
+	}
+	hwif->dma_base = (unsigned long) virt_dma_base;
+
 	hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
 					  IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
 					  &hwif->dmatable_dma);
 
 	if (!hwif->dmatable_cpu)
-		goto dma_alloc_failure;
+		goto dma_pci_alloc_failure;
 
 	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 
@@ -411,6 +420,12 @@
 	printk(KERN_INFO
 	       "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
 
+dma_pci_alloc_failure:
+	iounmap(virt_dma_base);
+
+dma_remap_failure:
+	release_mem_region(dma_base, num_ports);
+
 dma_alloc_failure:
 	/* Disable DMA because we couldnot allocate any DMA maps */
 	hwif->autodma = 0;
@@ -607,18 +622,15 @@
 	hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
 	hwif->ide_dma_timeout = &__ide_dma_timeout;
 
-	/*
-	 * The IOC4 uses MMIO rather than Port IO.
-	 * It also needs special workarounds for INB.
-	 */
-	default_hwif_mmiops(hwif);
 	hwif->INB = &sgiioc4_INB;
 }
 
 static int __devinit
 sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 {
-	unsigned long base, ctl, dma_base, irqport;
+	unsigned long cmd_base, dma_base, irqport;
+	unsigned long bar0, cmd_phys_base, ctl;
+	void __iomem *virt_base;
 	ide_hwif_t *hwif;
 	int h;
 
@@ -636,23 +648,32 @@
 	}
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
-	base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
-	ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
-	irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
+	bar0 = pci_resource_start(dev, 0);
+	virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+	if (virt_base == NULL) {
+		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
+			d->name, bar0);
+		return -ENOMEM;
+	}
+	cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
+	ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
+	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
 	dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 
-	if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
+	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
+	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+	    hwif->name)) {
 		printk(KERN_ERR
-			"%s : %s -- ERROR, Port Addresses "
+			"%s : %s -- ERROR, Addresses "
 			"0x%p to 0x%p ALREADY in use\n",
-		       __FUNCTION__, hwif->name, (void *) base,
-		       (void *) base + IOC4_CMD_CTL_BLK_SIZE);
+		       __FUNCTION__, hwif->name, (void *) cmd_phys_base,
+		       (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 		return -ENOMEM;
 	}
 
-	if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
+	if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
 		/* Initialize the IO registers */
-		sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
+		sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport);
 		memcpy(hwif->io_ports, hwif->hw.io_ports,
 		       sizeof (hwif->io_ports));
 		hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
@@ -665,6 +686,9 @@
 	hwif->cds = (struct ide_pci_device_s *) d;
 	hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
 
+	/* The IOC4 uses MMIO rather than Port IO. */
+	default_hwif_mmiops(hwif);
+
 	/* Initializing chipset IRQ Registers */
 	hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
 
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index afdaee3..9b7589e 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -6,7 +6,7 @@
  *
  *   vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
  *   vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
- *   vt8235, vt8237
+ *   vt8235, vt8237, vt8237a
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
  *
@@ -81,6 +81,7 @@
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8233c",	PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, VIA_UDMA_100 },
diff --git a/drivers/infiniband/hw/mthca/mthca_allocator.c b/drivers/infiniband/hw/mthca/mthca_allocator.c
index 25157f5..f930e55 100644
--- a/drivers/infiniband/hw/mthca/mthca_allocator.c
+++ b/drivers/infiniband/hw/mthca/mthca_allocator.c
@@ -41,9 +41,11 @@
 /* Trivial bitmap-based allocator */
 u32 mthca_alloc(struct mthca_alloc *alloc)
 {
+	unsigned long flags;
 	u32 obj;
 
-	spin_lock(&alloc->lock);
+	spin_lock_irqsave(&alloc->lock, flags);
+
 	obj = find_next_zero_bit(alloc->table, alloc->max, alloc->last);
 	if (obj >= alloc->max) {
 		alloc->top = (alloc->top + alloc->max) & alloc->mask;
@@ -56,19 +58,24 @@
 	} else
 		obj = -1;
 
-	spin_unlock(&alloc->lock);
+	spin_unlock_irqrestore(&alloc->lock, flags);
 
 	return obj;
 }
 
 void mthca_free(struct mthca_alloc *alloc, u32 obj)
 {
+	unsigned long flags;
+
 	obj &= alloc->max - 1;
-	spin_lock(&alloc->lock);
+
+	spin_lock_irqsave(&alloc->lock, flags);
+
 	clear_bit(obj, alloc->table);
 	alloc->last = min(alloc->last, obj);
 	alloc->top = (alloc->top + alloc->max) & alloc->mask;
-	spin_unlock(&alloc->lock);
+
+	spin_unlock_irqrestore(&alloc->lock, flags);
 }
 
 int mthca_alloc_init(struct mthca_alloc *alloc, u32 num, u32 mask,
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index a4f7288..3ef567b 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -5,6 +5,7 @@
 config ISDN_PPP
 	bool "Support synchronous PPP"
 	depends on INET
+	select SLHC
 	help
 	  Over digital connections such as ISDN, there is no need to
 	  synchronize sender and recipient's clocks with start and stop bits
diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c
index d3f8d75..a82f313 100644
--- a/drivers/macintosh/via-pmu-backlight.c
+++ b/drivers/macintosh/via-pmu-backlight.c
@@ -18,17 +18,48 @@
 static struct backlight_properties pmu_backlight_data;
 static spinlock_t pmu_backlight_lock;
 static int sleeping;
+static u8 bl_curve[FB_BACKLIGHT_LEVELS];
 
-static int pmu_backlight_get_level_brightness(struct fb_info *info,
-		int level)
+static void pmu_backlight_init_curve(u8 off, u8 min, u8 max)
+{
+	unsigned int i, flat, count, range = (max - min);
+
+	bl_curve[0] = off;
+
+	for (flat = 1; flat < (FB_BACKLIGHT_LEVELS / 16); ++flat)
+		bl_curve[flat] = min;
+
+	count = FB_BACKLIGHT_LEVELS * 15 / 16;
+	for (i = 0; i < count; ++i)
+		bl_curve[flat + i] = min + (range * (i + 1) / count);
+}
+
+static int pmu_backlight_curve_lookup(int value)
+{
+	int level = (FB_BACKLIGHT_LEVELS - 1);
+	int i, max = 0;
+
+	/* Look for biggest value */
+	for (i = 0; i < FB_BACKLIGHT_LEVELS; i++)
+		max = max((int)bl_curve[i], max);
+
+	/* Look for nearest value */
+	for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) {
+		int diff = abs(bl_curve[i] - value);
+		if (diff < max) {
+			max = diff;
+			level = i;
+		}
+	}
+	return level;
+}
+
+static int pmu_backlight_get_level_brightness(int level)
 {
 	int pmulevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
-	pmulevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_PMU_LEVEL;
-	mutex_unlock(&info->bl_mutex);
-
+	pmulevel = bl_curve[level] * FB_BACKLIGHT_MAX / MAX_PMU_LEVEL;
 	if (pmulevel < 0)
 		pmulevel = 0;
 	else if (pmulevel > MAX_PMU_LEVEL)
@@ -39,7 +70,6 @@
 
 static int pmu_backlight_update_status(struct backlight_device *bd)
 {
-	struct fb_info *info = class_get_devdata(&bd->class_dev);
 	struct adb_request req;
 	unsigned long flags;
 	int level = bd->props->brightness;
@@ -55,7 +85,7 @@
 		level = 0;
 
 	if (level > 0) {
-		int pmulevel = pmu_backlight_get_level_brightness(info, level);
+		int pmulevel = pmu_backlight_get_level_brightness(level);
 
 		pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel);
 		pmu_wait_complete(&req);
@@ -88,35 +118,19 @@
 };
 
 #ifdef CONFIG_PM
-static int pmu_backlight_sleep_call(struct pmu_sleep_notifier *self, int when)
+void pmu_backlight_set_sleep(int sleep)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&pmu_backlight_lock, flags);
-
-	switch (when) {
-	case PBOOK_SLEEP_REQUEST:
-		sleeping = 1;
-		break;
-	case PBOOK_WAKE:
-		sleeping = 0;
-		break;
-	}
-
+	sleeping = sleep;
 	spin_unlock_irqrestore(&pmu_backlight_lock, flags);
-
-	return PBOOK_SLEEP_OK;
 }
-
-static struct pmu_sleep_notifier pmu_backlight_sleep_notif = {
-	.notifier_call = pmu_backlight_sleep_call,
-};
-#endif
+#endif /* CONFIG_PM */
 
 void __init pmu_backlight_init()
 {
 	struct backlight_device *bd;
-	struct fb_info *info;
 	char name[10];
 	int level, autosave;
 
@@ -131,27 +145,14 @@
 	    !machine_is_compatible("PowerBook1,1"))
 		return;
 
-	/* Actually, this is a hack, but I don't know of a better way
-	 * to get the first framebuffer device.
-	 */
-	info = registered_fb[0];
-	if (!info) {
-		printk("pmubl: No framebuffer found\n");
-		goto error;
-	}
+	snprintf(name, sizeof(name), "pmubl");
 
-	snprintf(name, sizeof(name), "pmubl%d", info->node);
-
-	bd = backlight_device_register(name, info, &pmu_backlight_data);
+	bd = backlight_device_register(name, NULL, &pmu_backlight_data);
 	if (IS_ERR(bd)) {
 		printk("pmubl: Backlight registration failed\n");
 		goto error;
 	}
-
-	mutex_lock(&info->bl_mutex);
-	info->bl_dev = bd;
-	fb_bl_default_curve(info, 0x7F, 0x46, 0x0E);
-	mutex_unlock(&info->bl_mutex);
+	pmu_backlight_init_curve(0x7F, 0x46, 0x0E);
 
 	level = pmu_backlight_data.max_brightness;
 
@@ -161,28 +162,22 @@
 		pmu_request(&req, NULL, 2, 0xd9, 0);
 		pmu_wait_complete(&req);
 
-		mutex_lock(&info->bl_mutex);
-		level = pmac_backlight_curve_lookup(info,
+		level = pmu_backlight_curve_lookup(
 				(req.reply[0] >> 4) *
 				pmu_backlight_data.max_brightness / 15);
-		mutex_unlock(&info->bl_mutex);
 	}
 
-	up(&bd->sem);
+	down(&bd->sem);
 	bd->props->brightness = level;
 	bd->props->power = FB_BLANK_UNBLANK;
 	bd->props->update_status(bd);
-	down(&bd->sem);
+	up(&bd->sem);
 
 	mutex_lock(&pmac_backlight_mutex);
 	if (!pmac_backlight)
 		pmac_backlight = bd;
 	mutex_unlock(&pmac_backlight_mutex);
 
-#ifdef CONFIG_PM
-	pmu_register_sleep_notifier(&pmu_backlight_sleep_notif);
-#endif
-
 	printk("pmubl: Backlight initialized (%s)\n", name);
 
 	return;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index ea38680..14610a6 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -1995,6 +1995,8 @@
 	out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
 }
 
+extern void pmu_backlight_set_sleep(int sleep);
+
 static int
 pmac_suspend_devices(void)
 {
@@ -2032,6 +2034,11 @@
 		return -EBUSY;
 	}
 
+#ifdef CONFIG_PMAC_BACKLIGHT
+	/* Tell backlight code not to muck around with the chip anymore */
+	pmu_backlight_set_sleep(1);
+#endif
+
 	/* Call platform functions marked "on sleep" */
 	pmac_pfunc_i2c_suspend();
 	pmac_pfunc_base_suspend();
@@ -2090,6 +2097,11 @@
 {
 	mdelay(100);
 
+#ifdef CONFIG_PMAC_BACKLIGHT
+	/* Tell backlight code it can use the chip again */
+	pmu_backlight_set_sleep(0);
+#endif
+
 	/* Power back up system devices (including the PIC) */
 	device_power_up();
 
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 87bfe9e..3b4d69c 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -930,10 +930,13 @@
 
 	seq_printf(seq, " [%d/%d] [", conf->raid_disks,
 						conf->working_disks);
-	for (i = 0; i < conf->raid_disks; i++)
+	rcu_read_lock();
+	for (i = 0; i < conf->raid_disks; i++) {
+		mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
 		seq_printf(seq, "%s",
-			      conf->mirrors[i].rdev &&
-			      test_bit(In_sync, &conf->mirrors[i].rdev->flags) ? "U" : "_");
+			   rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
+	}
+	rcu_read_unlock();
 	seq_printf(seq, "]");
 }
 
@@ -975,7 +978,6 @@
 static void print_conf(conf_t *conf)
 {
 	int i;
-	mirror_info_t *tmp;
 
 	printk("RAID1 conf printout:\n");
 	if (!conf) {
@@ -985,14 +987,17 @@
 	printk(" --- wd:%d rd:%d\n", conf->working_disks,
 		conf->raid_disks);
 
+	rcu_read_lock();
 	for (i = 0; i < conf->raid_disks; i++) {
 		char b[BDEVNAME_SIZE];
-		tmp = conf->mirrors + i;
-		if (tmp->rdev)
+		mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+		if (rdev)
 			printk(" disk %d, wo:%d, o:%d, dev:%s\n",
-				i, !test_bit(In_sync, &tmp->rdev->flags), !test_bit(Faulty, &tmp->rdev->flags),
-				bdevname(tmp->rdev->bdev,b));
+			       i, !test_bit(In_sync, &rdev->flags),
+			       !test_bit(Faulty, &rdev->flags),
+			       bdevname(rdev->bdev,b));
 	}
+	rcu_read_unlock();
 }
 
 static void close_sync(conf_t *conf)
@@ -1008,20 +1013,20 @@
 {
 	int i;
 	conf_t *conf = mddev->private;
-	mirror_info_t *tmp;
 
 	/*
 	 * Find all failed disks within the RAID1 configuration 
-	 * and mark them readable
+	 * and mark them readable.
+	 * Called under mddev lock, so rcu protection not needed.
 	 */
 	for (i = 0; i < conf->raid_disks; i++) {
-		tmp = conf->mirrors + i;
-		if (tmp->rdev 
-		    && !test_bit(Faulty, &tmp->rdev->flags)
-		    && !test_bit(In_sync, &tmp->rdev->flags)) {
+		mdk_rdev_t *rdev = conf->mirrors[i].rdev;
+		if (rdev
+		    && !test_bit(Faulty, &rdev->flags)
+		    && !test_bit(In_sync, &rdev->flags)) {
 			conf->working_disks++;
 			mddev->degraded--;
-			set_bit(In_sync, &tmp->rdev->flags);
+			set_bit(In_sync, &rdev->flags);
 		}
 	}
 
@@ -1237,7 +1242,7 @@
 		/* ouch - failed to read all of that.
 		 * Try some synchronous reads of other devices to get
 		 * good data, much like with normal read errors.  Only
-		 * read into the pages we already have so they we don't
+		 * read into the pages we already have so we don't
 		 * need to re-issue the read request.
 		 * We don't need to freeze the array, because being in an
 		 * active sync request, there is no normal IO, and
@@ -1257,6 +1262,10 @@
 				s = PAGE_SIZE >> 9;
 			do {
 				if (r1_bio->bios[d]->bi_end_io == end_sync_read) {
+					/* No rcu protection needed here devices
+					 * can only be removed when no resync is
+					 * active, and resync is currently active
+					 */
 					rdev = conf->mirrors[d].rdev;
 					if (sync_page_io(rdev->bdev,
 							 sect + rdev->data_offset,
@@ -1463,6 +1472,11 @@
 					s = PAGE_SIZE >> 9;
 
 				do {
+					/* Note: no rcu protection needed here
+					 * as this is synchronous in the raid1d thread
+					 * which is the thread that might remove
+					 * a device.  If raid1d ever becomes multi-threaded....
+					 */
 					rdev = conf->mirrors[d].rdev;
 					if (rdev &&
 					    test_bit(In_sync, &rdev->flags) &&
@@ -1486,7 +1500,6 @@
 							d = conf->raid_disks;
 						d--;
 						rdev = conf->mirrors[d].rdev;
-						atomic_add(s, &rdev->corrected_errors);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
 							if (sync_page_io(rdev->bdev,
@@ -1509,9 +1522,11 @@
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
-							else
+							else {
+								atomic_add(s, &rdev->corrected_errors);
 								printk(KERN_INFO "raid1:%s: read error corrected (%d sectors at %llu on %s)\n",
 								       mdname(mddev), s, (unsigned long long)(sect + rdev->data_offset), bdevname(rdev->bdev, b));
+							}
 						}
 					}
 				} else {
@@ -1787,19 +1802,17 @@
 		for (i=0; i<conf->raid_disks; i++) {
 			bio = r1_bio->bios[i];
 			if (bio->bi_end_io == end_sync_read) {
-				md_sync_acct(conf->mirrors[i].rdev->bdev, nr_sectors);
+				md_sync_acct(bio->bi_bdev, nr_sectors);
 				generic_make_request(bio);
 			}
 		}
 	} else {
 		atomic_set(&r1_bio->remaining, 1);
 		bio = r1_bio->bios[r1_bio->read_disk];
-		md_sync_acct(conf->mirrors[r1_bio->read_disk].rdev->bdev,
-			     nr_sectors);
+		md_sync_acct(bio->bi_bdev, nr_sectors);
 		generic_make_request(bio);
 
 	}
-
 	return nr_sectors;
 }
 
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 07136ec..d7b115a 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -120,7 +120,6 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/errno.h>
-#include <linux/config.h>	/* for CONFIG_IP_MULTICAST */
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 80e8ca0..7c23813 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -3169,7 +3169,7 @@
 {
 	int pci_rc, eisa_rc;
 
-	pci_rc = pci_module_init(&vortex_driver);
+	pci_rc = pci_register_driver(&vortex_driver);
 	eisa_rc = vortex_eisa_init();
 
 	if (pci_rc == 0)
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 1428bb7..4c2e763 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -2098,7 +2098,7 @@
 #ifdef MODULE
 	printk("%s", version);
 #endif
-	return pci_module_init (&cp_driver);
+	return pci_register_driver(&cp_driver);
 }
 
 static void __exit cp_exit (void)
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index e4f4eaf..2a70774 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -2629,7 +2629,7 @@
 	printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
 #endif
 
-	return pci_module_init (&rtl8139_pci_driver);
+	return pci_register_driver(&rtl8139_pci_driver);
 }
 
 
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index d2935ae..3eb7048 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -299,7 +299,7 @@
 	 *	Slow phase with lock held.
 	 */
 	 
-	disable_irq_nosync(dev->irq);
+	disable_irq_nosync_lockdep(dev->irq);
 	
 	spin_lock(&ei_local->page_lock);
 	
@@ -338,7 +338,7 @@
 		netif_stop_queue(dev);
 		outb_p(ENISR_ALL, e8390_base + EN0_IMR);
 		spin_unlock(&ei_local->page_lock);
-		enable_irq(dev->irq);
+		enable_irq_lockdep(dev->irq);
 		ei_local->stat.tx_errors++;
 		return 1;
 	}
@@ -379,7 +379,7 @@
 	outb_p(ENISR_ALL, e8390_base + EN0_IMR);
 	
 	spin_unlock(&ei_local->page_lock);
-	enable_irq(dev->irq);
+	enable_irq_lockdep(dev->irq);
 
 	dev_kfree_skb (skb);
 	ei_local->stat.tx_bytes += send_length;
@@ -505,9 +505,9 @@
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void ei_poll(struct net_device *dev)
 {
-	disable_irq(dev->irq);
+	disable_irq_lockdep(dev->irq);
 	ei_interrupt(dev->irq, dev, NULL);
-	enable_irq(dev->irq);
+	enable_irq_lockdep(dev->irq);
 }
 #endif
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 30b3671..6f388d9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1411,6 +1411,22 @@
 	  <file:Documentation/networking/net-modules.txt>.  The module will be
 	  called forcedeth.
 
+config FORCEDETH_NAPI
+	bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+	depends on FORCEDETH && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
 
 config CS89x0
 	tristate "CS89x0 support"
@@ -2290,6 +2306,15 @@
 	  This enables support for Port 2 of the Marvell MV643XX Gigabit
 	  Ethernet.
 
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	help
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
 endmenu
 
 #
@@ -2550,6 +2575,7 @@
 
 config PPP
 	tristate "PPP (point-to-point protocol) support"
+	select SLHC
 	---help---
 	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
 	  the same purpose: sending Internet traffic over telephone (and other
@@ -2730,6 +2756,7 @@
 config SLIP_COMPRESSED
 	bool "CSLIP compressed headers"
 	depends on SLIP
+	select SLHC
 	---help---
 	  This protocol is faster than SLIP because it uses compression on the
 	  TCP/IP headers (not on the data itself), but it has to be supported
@@ -2742,6 +2769,12 @@
 	  <http://www.tldp.org/docs.html#howto>, explains how to configure
 	  CSLIP. This won't enlarge your kernel.
 
+config SLHC
+	tristate
+	help
+	  This option enables Van Jacobsen serial line header compression
+	  routines.
+
 config SLIP_SMART
 	bool "Keepalive and linefill"
 	depends on SLIP
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8427bf9..6ff1764 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,10 +2,6 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
-ifeq ($(CONFIG_ISDN_PPP),y)
-  obj-$(CONFIG_ISDN) += slhc.o
-endif
-
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_IBM_EMAC) += ibm_emac/
 obj-$(CONFIG_IXGB) += ixgb/
@@ -113,8 +109,9 @@
 obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
 
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
 
-obj-$(CONFIG_PPP) += ppp_generic.o slhc.o
+obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
 obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
 obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
@@ -123,9 +120,7 @@
 obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
 
 obj-$(CONFIG_SLIP) += slip.o
-ifeq ($(CONFIG_SLIP_COMPRESSED),y)
-  obj-$(CONFIG_SLIP) += slhc.o
-endif
+obj-$(CONFIG_SLHC) += slhc.o
 
 obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 1c01e9b..c0f3574 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -725,7 +725,7 @@
 
 static int __init acenic_init(void)
 {
-	return pci_module_init(&acenic_pci_driver);
+	return pci_register_driver(&acenic_pci_driver);
 }
 
 static void __exit acenic_exit(void)
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index ed322a7..2ef8e55 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -2158,7 +2158,7 @@
 
 static int __init amd8111e_init(void)
 {
-	return pci_module_init(&amd8111e_driver);
+	return pci_register_driver(&amd8111e_driver);
 }
 
 static void __exit amd8111e_cleanup(void)
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 979a33d..fc256c1 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -177,7 +177,7 @@
 static int __init com20020pci_init(void)
 {
 	BUGLVL(D_NORMAL) printk(VERSION);
-	return pci_module_init(&com20020pci_driver);
+	return pci_register_driver(&com20020pci_driver);
 }
 
 static void __exit com20020pci_cleanup(void)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index bea0fc0..17eb291 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -2354,7 +2354,7 @@
 	dma_desc_align_mask = ~(dma_desc_align_size - 1);
 	dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
 
-	return pci_module_init(&b44_driver);
+	return pci_register_driver(&b44_driver);
 }
 
 static void __exit b44_cleanup(void)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 652eb05..654b903 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6016,7 +6016,7 @@
 
 static int __init bnx2_init(void)
 {
-	return pci_module_init(&bnx2_pci_driver);
+	return pci_register_driver(&bnx2_pci_driver);
 }
 
 static void __exit bnx2_cleanup(void)
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index a31544c..26040ab 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -5245,7 +5245,7 @@
 	else
 		link_transition_timeout = 0;
 
-	return pci_module_init(&cas_driver);
+	return pci_register_driver(&cas_driver);
 }
 
 static void __exit cas_cleanup(void)
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
index e678724..b6de184 100644
--- a/drivers/net/chelsio/cxgb2.c
+++ b/drivers/net/chelsio/cxgb2.c
@@ -1243,7 +1243,7 @@
 
 static int __init t1_init_module(void)
 {
-	return pci_module_init(&driver);
+	return pci_register_driver(&driver);
 }
 
 static void __exit t1_cleanup_module(void)
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 91cc8cb..7d06ded 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -3444,7 +3444,7 @@
 {
 	int rc_pci, rc_eisa;
 
-	rc_pci = pci_module_init(&dfx_driver);
+	rc_pci = pci_register_driver(&dfx_driver);
 	if (rc_pci >= 0) dfx_have_pci = 1;
 	
 	rc_eisa = dfx_eisa_init();
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 402961e..a572c29 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -1815,7 +1815,7 @@
 static int __init
 rio_init (void)
 {
-	return pci_module_init (&rio_driver);
+	return pci_register_driver(&rio_driver);
 }
 
 static void __exit
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 91ef5f2..47d9708 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
 
-  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
@@ -158,10 +158,10 @@
 
 
 #define DRV_NAME		"e100"
-#define DRV_EXT		"-NAPI"
-#define DRV_VERSION		"3.5.10-k2"DRV_EXT
+#define DRV_EXT			"-NAPI"
+#define DRV_VERSION		"3.5.16-k2"DRV_EXT
 #define DRV_DESCRIPTION		"Intel(R) PRO/100 Network Driver"
-#define DRV_COPYRIGHT		"Copyright(c) 1999-2005 Intel Corporation"
+#define DRV_COPYRIGHT		"Copyright(c) 1999-2006 Intel Corporation"
 #define PFX			DRV_NAME ": "
 
 #define E100_WATCHDOG_PERIOD	(2 * HZ)
@@ -173,8 +173,11 @@
 MODULE_VERSION(DRV_VERSION);
 
 static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
 module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
 #define DPRINTK(nlevel, klevel, fmt, args...) \
 	(void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
 	printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
@@ -756,7 +759,8 @@
 	checksum = le16_to_cpu(0xBABA - checksum);
 	if(checksum != nic->eeprom[nic->eeprom_wc - 1]) {
 		DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
-		return -EAGAIN;
+		if (!eeprom_bad_csum_allow)
+			return -EAGAIN;
 	}
 
 	return 0;
@@ -1391,15 +1395,11 @@
 	}
 
 	if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
-	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000))) {
-		/* enable/disable MDI/MDI-X auto-switching.
-		   MDI/MDI-X auto-switching is disabled for 82551ER/QM chips */
-		if((nic->mac == mac_82551_E) || (nic->mac == mac_82551_F) ||
-		   (nic->mac == mac_82551_10) || (nic->mii.force_media) ||
-		   !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))
-			mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 0);
-		else
-			mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, NCONFIG_AUTO_SWITCH);
+	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+		!(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+		/* enable/disable MDI/MDI-X auto-switching. */
+		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
 	}
 
 	return 0;
@@ -1763,11 +1763,10 @@
 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 {
-	if(!(rx->skb = dev_alloc_skb(RFD_BUF_LEN + NET_IP_ALIGN)))
+	if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
 		return -ENOMEM;
 
 	/* Align, init, and map the RFD. */
-	rx->skb->dev = nic->netdev;
 	skb_reserve(rx->skb, NET_IP_ALIGN);
 	memcpy(rx->skb->data, &nic->blank_rfd, sizeof(struct rfd));
 	rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
@@ -2143,7 +2142,7 @@
 
 	e100_start_receiver(nic, NULL);
 
-	if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) {
+	if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
 		err = -ENOMEM;
 		goto err_loopback_none;
 	}
@@ -2795,6 +2794,7 @@
 	/* Detach; put netif into state similar to hotplug unplug. */
 	netif_poll_enable(netdev);
 	netif_device_detach(netdev);
+	pci_disable_device(pdev);
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
@@ -2873,7 +2873,7 @@
 		printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
 		printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
 	}
-	return pci_module_init(&e100_driver);
+	return pci_register_driver(&e100_driver);
 }
 
 static void __exit e100_cleanup_module(void)
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index d304297..98afa9c 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -242,12 +242,10 @@
 	struct timer_list watchdog_timer;
 	struct timer_list phy_info_timer;
 	struct vlan_group *vlgrp;
-    	uint16_t mng_vlan_id;
+	uint16_t mng_vlan_id;
 	uint32_t bd_number;
 	uint32_t rx_buffer_len;
-	uint32_t part_num;
 	uint32_t wol;
-	uint32_t ksp3_port_a;
 	uint32_t smartspeed;
 	uint32_t en_mng_pt;
 	uint16_t link_speed;
@@ -342,7 +340,9 @@
 	boolean_t tso_force;
 #endif
 	boolean_t smart_power_down;	/* phy smart power down */
+	boolean_t quad_port_a;
 	unsigned long flags;
+	uint32_t eeprom_wol;
 };
 
 enum e1000_state_t {
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 88a82ba..3fccffd 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -183,6 +183,9 @@
 		return -EINVAL;
 	}
 
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+
 	if (ecmd->autoneg == AUTONEG_ENABLE) {
 		hw->autoneg = 1;
 		if (hw->media_type == e1000_media_type_fiber)
@@ -199,16 +202,20 @@
 						  ADVERTISED_TP;
 		ecmd->advertising = hw->autoneg_advertised;
 	} else
-		if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex))
+		if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
+			clear_bit(__E1000_RESETTING, &adapter->flags);
 			return -EINVAL;
+		}
 
 	/* reset the link */
 
-	if (netif_running(adapter->netdev))
-		e1000_reinit_locked(adapter);
-	else
+	if (netif_running(adapter->netdev)) {
+		e1000_down(adapter);
+		e1000_up(adapter);
+	} else
 		e1000_reset(adapter);
 
+	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return 0;
 }
 
@@ -238,9 +245,13 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	int retval = 0;
 
 	adapter->fc_autoneg = pause->autoneg;
 
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+
 	if (pause->rx_pause && pause->tx_pause)
 		hw->fc = e1000_fc_full;
 	else if (pause->rx_pause && !pause->tx_pause)
@@ -253,15 +264,17 @@
 	hw->original_fc = hw->fc;
 
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
-		if (netif_running(adapter->netdev))
-			e1000_reinit_locked(adapter);
-		else
+		if (netif_running(adapter->netdev)) {
+			e1000_down(adapter);
+			e1000_up(adapter);
+		} else
 			e1000_reset(adapter);
 	} else
-		return ((hw->media_type == e1000_media_type_fiber) ?
-			e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+		retval = ((hw->media_type == e1000_media_type_fiber) ?
+			   e1000_setup_link(hw) : e1000_force_mac_fc(hw));
 
-	return 0;
+	clear_bit(__E1000_RESETTING, &adapter->flags);
+	return retval;
 }
 
 static uint32_t
@@ -415,12 +428,12 @@
 		regs_buff[23] = regs_buff[18]; /* mdix mode */
 		e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
 	} else {
-        	e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+		e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 		regs_buff[13] = (uint32_t)phy_data; /* cable length */
 		regs_buff[14] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 		regs_buff[15] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
 		regs_buff[16] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
-        	e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+		e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
 		regs_buff[17] = (uint32_t)phy_data; /* extended 10bt distance */
 		regs_buff[18] = regs_buff[13]; /* cable polarity */
 		regs_buff[19] = 0;  /* Dummy (to align w/ IGP phy reg dump) */
@@ -696,7 +709,6 @@
 	}
 
 	clear_bit(__E1000_RESETTING, &adapter->flags);
-
 	return 0;
 err_setup_tx:
 	e1000_free_all_rx_resources(adapter);
@@ -881,16 +893,17 @@
 
 	*data = 0;
 
+	/* NOTE: we don't test MSI interrupts here, yet */
 	/* Hook up test interrupt handler just for this test */
 	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
-			 netdev->name, netdev)) {
- 		shared_int = FALSE;
- 	} else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
-			      netdev->name, netdev)){
+			 netdev->name, netdev))
+		shared_int = FALSE;
+	else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
+			      netdev->name, netdev)) {
 		*data = 1;
 		return -1;
 	}
-	DPRINTK(PROBE,INFO, "testing %s interrupt\n",
+	DPRINTK(HW, INFO, "testing %s interrupt\n",
 	        (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
@@ -1256,11 +1269,10 @@
 		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
 		/* autoneg off */
 		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
-	} else if (adapter->hw.phy_type == e1000_phy_gg82563) {
+	} else if (adapter->hw.phy_type == e1000_phy_gg82563)
 		e1000_write_phy_reg(&adapter->hw,
 		                    GG82563_PHY_KMRN_MODE_CTRL,
 		                    0x1CC);
-	}
 
 	ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
 
@@ -1288,9 +1300,9 @@
 	}
 
 	if (adapter->hw.media_type == e1000_media_type_copper &&
-	   adapter->hw.phy_type == e1000_phy_m88) {
+	   adapter->hw.phy_type == e1000_phy_m88)
 		ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
-	} else {
+	else {
 		/* Set the ILOS bit on the fiber Nic is half
 		 * duplex link is detected. */
 		stat_reg = E1000_READ_REG(&adapter->hw, STATUS);
@@ -1426,11 +1438,10 @@
 	case e1000_82546_rev_3:
 	default:
 		hw->autoneg = TRUE;
-		if (hw->phy_type == e1000_phy_gg82563) {
+		if (hw->phy_type == e1000_phy_gg82563)
 			e1000_write_phy_reg(hw,
 					    GG82563_PHY_KMRN_MODE_CTRL,
 					    0x180);
-		}
 		e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
 		if (phy_reg & MII_CR_LOOPBACK) {
 			phy_reg &= ~MII_CR_LOOPBACK;
@@ -1590,6 +1601,8 @@
 	return E1000_TEST_LEN;
 }
 
+extern void e1000_power_up_phy(struct e1000_adapter *);
+
 static void
 e1000_diag_test(struct net_device *netdev,
 		   struct ethtool_test *eth_test, uint64_t *data)
@@ -1606,6 +1619,8 @@
 		uint8_t forced_speed_duplex = adapter->hw.forced_speed_duplex;
 		uint8_t autoneg = adapter->hw.autoneg;
 
+		DPRINTK(HW, INFO, "offline testing starting\n");
+
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result */
 		if (e1000_link_test(adapter, &data[4]))
@@ -1629,6 +1644,8 @@
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		e1000_reset(adapter);
+		/* make sure the phy is powered up */
+		e1000_power_up_phy(adapter);
 		if (e1000_loopback_test(adapter, &data[3]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1642,6 +1659,7 @@
 		if (if_running)
 			dev_open(netdev);
 	} else {
+		DPRINTK(HW, INFO, "online testing starting\n");
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1657,14 +1675,12 @@
 	msleep_interruptible(4 * 1000);
 }
 
-static void
-e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	int retval = 1; /* fail by default */
 
-	switch (adapter->hw.device_id) {
-	case E1000_DEV_ID_82542:
+	switch (hw->device_id) {
 	case E1000_DEV_ID_82543GC_FIBER:
 	case E1000_DEV_ID_82543GC_COPPER:
 	case E1000_DEV_ID_82544EI_FIBER:
@@ -1672,52 +1688,87 @@
 	case E1000_DEV_ID_82545EM_FIBER:
 	case E1000_DEV_ID_82545EM_COPPER:
 	case E1000_DEV_ID_82546GB_QUAD_COPPER:
+	case E1000_DEV_ID_82546GB_PCIE:
+		/* these don't support WoL at all */
 		wol->supported = 0;
-		wol->wolopts   = 0;
+		break;
+	case E1000_DEV_ID_82546EB_FIBER:
+	case E1000_DEV_ID_82546GB_FIBER:
+	case E1000_DEV_ID_82571EB_FIBER:
+	case E1000_DEV_ID_82571EB_SERDES:
+	case E1000_DEV_ID_82571EB_COPPER:
+		/* Wake events not supported on port B */
+		if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
+			wol->supported = 0;
+			break;
+		}
+		/* return success for non excluded adapter ports */
+		retval = 0;
+		break;
+	case E1000_DEV_ID_82571EB_QUAD_COPPER:
+	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+		/* quad port adapters only support WoL on port A */
+		if (!adapter->quad_port_a) {
+			wol->supported = 0;
+			break;
+		}
+		/* return success for non excluded adapter ports */
+		retval = 0;
+		break;
+	default:
+		/* dual port cards only support WoL on port A from now on
+		 * unless it was enabled in the eeprom for port B
+		 * so exclude FUNC_1 ports from having WoL enabled */
+		if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 &&
+		    !adapter->eeprom_wol) {
+			wol->supported = 0;
+			break;
+		}
+
+		retval = 0;
+	}
+
+	return retval;
+}
+
+static void
+e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_UCAST | WAKE_MCAST |
+	                 WAKE_BCAST | WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	/* this function will set ->supported = 0 and return 1 if wol is not
+	 * supported by this hardware */
+	if (e1000_wol_exclusion(adapter, wol))
 		return;
 
+	/* apply any specific unsupported masks here */
+	switch (adapter->hw.device_id) {
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
-		/* device id 10B5 port-A supports wol */
-		if (!adapter->ksp3_port_a) {
-			wol->supported = 0;
-			return;
-		}
-		/* KSP3 does not suppport UCAST wake-ups for any interface */
-		wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+		/* KSP3 does not suppport UCAST wake-ups */
+		wol->supported &= ~WAKE_UCAST;
 
 		if (adapter->wol & E1000_WUFC_EX)
 			DPRINTK(DRV, ERR, "Interface does not support "
 		        "directed (unicast) frame wake-up packets\n");
-		wol->wolopts = 0;
-		goto do_defaults;
-
-	case E1000_DEV_ID_82546EB_FIBER:
-	case E1000_DEV_ID_82546GB_FIBER:
-	case E1000_DEV_ID_82571EB_FIBER:
-		/* Wake events only supported on port A for dual fiber */
-		if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
-			wol->supported = 0;
-			wol->wolopts   = 0;
-			return;
-		}
-		/* Fall Through */
-
+		break;
 	default:
-		wol->supported = WAKE_UCAST | WAKE_MCAST |
-				 WAKE_BCAST | WAKE_MAGIC;
-		wol->wolopts = 0;
-
-do_defaults:
-		if (adapter->wol & E1000_WUFC_EX)
-			wol->wolopts |= WAKE_UCAST;
-		if (adapter->wol & E1000_WUFC_MC)
-			wol->wolopts |= WAKE_MCAST;
-		if (adapter->wol & E1000_WUFC_BC)
-			wol->wolopts |= WAKE_BCAST;
-		if (adapter->wol & E1000_WUFC_MAG)
-			wol->wolopts |= WAKE_MAGIC;
-		return;
+		break;
 	}
+
+	if (adapter->wol & E1000_WUFC_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & E1000_WUFC_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & E1000_WUFC_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & E1000_WUFC_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+
+	return;
 }
 
 static int
@@ -1726,52 +1777,36 @@
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	switch (adapter->hw.device_id) {
-	case E1000_DEV_ID_82542:
-	case E1000_DEV_ID_82543GC_FIBER:
-	case E1000_DEV_ID_82543GC_COPPER:
-	case E1000_DEV_ID_82544EI_FIBER:
-	case E1000_DEV_ID_82546EB_QUAD_COPPER:
-	case E1000_DEV_ID_82546GB_QUAD_COPPER:
-	case E1000_DEV_ID_82545EM_FIBER:
-	case E1000_DEV_ID_82545EM_COPPER:
+	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+		return -EOPNOTSUPP;
+
+	if (e1000_wol_exclusion(adapter, wol))
 		return wol->wolopts ? -EOPNOTSUPP : 0;
 
+	switch (hw->device_id) {
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
-		/* device id 10B5 port-A supports wol */
-		if (!adapter->ksp3_port_a)
-			return wol->wolopts ? -EOPNOTSUPP : 0;
-
 		if (wol->wolopts & WAKE_UCAST) {
 			DPRINTK(DRV, ERR, "Interface does not support "
 		        "directed (unicast) frame wake-up packets\n");
 			return -EOPNOTSUPP;
 		}
-
-	case E1000_DEV_ID_82546EB_FIBER:
-	case E1000_DEV_ID_82546GB_FIBER:
-	case E1000_DEV_ID_82571EB_FIBER:
-		/* Wake events only supported on port A for dual fiber */
-		if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
-			return wol->wolopts ? -EOPNOTSUPP : 0;
-		/* Fall Through */
-
+		break;
 	default:
-		if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
-			return -EOPNOTSUPP;
-
-		adapter->wol = 0;
-
-		if (wol->wolopts & WAKE_UCAST)
-			adapter->wol |= E1000_WUFC_EX;
-		if (wol->wolopts & WAKE_MCAST)
-			adapter->wol |= E1000_WUFC_MC;
-		if (wol->wolopts & WAKE_BCAST)
-			adapter->wol |= E1000_WUFC_BC;
-		if (wol->wolopts & WAKE_MAGIC)
-			adapter->wol |= E1000_WUFC_MAG;
+		break;
 	}
 
+	/* these settings will always override what we currently have */
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_UCAST)
+		adapter->wol |= E1000_WUFC_EX;
+	if (wol->wolopts & WAKE_MCAST)
+		adapter->wol |= E1000_WUFC_MC;
+	if (wol->wolopts & WAKE_BCAST)
+		adapter->wol |= E1000_WUFC_BC;
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol |= E1000_WUFC_MAG;
+
 	return 0;
 }
 
@@ -1895,8 +1930,8 @@
 	.get_regs               = e1000_get_regs,
 	.get_wol                = e1000_get_wol,
 	.set_wol                = e1000_set_wol,
-	.get_msglevel	        = e1000_get_msglevel,
-	.set_msglevel	        = e1000_set_msglevel,
+	.get_msglevel           = e1000_get_msglevel,
+	.set_msglevel           = e1000_set_msglevel,
 	.nway_reset             = e1000_nway_reset,
 	.get_link               = ethtool_op_get_link,
 	.get_eeprom_len         = e1000_get_eeprom_len,
@@ -1904,17 +1939,17 @@
 	.set_eeprom             = e1000_set_eeprom,
 	.get_ringparam          = e1000_get_ringparam,
 	.set_ringparam          = e1000_set_ringparam,
-	.get_pauseparam		= e1000_get_pauseparam,
-	.set_pauseparam		= e1000_set_pauseparam,
-	.get_rx_csum		= e1000_get_rx_csum,
-	.set_rx_csum		= e1000_set_rx_csum,
-	.get_tx_csum		= e1000_get_tx_csum,
-	.set_tx_csum		= e1000_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
+	.get_pauseparam         = e1000_get_pauseparam,
+	.set_pauseparam         = e1000_set_pauseparam,
+	.get_rx_csum            = e1000_get_rx_csum,
+	.set_rx_csum            = e1000_set_rx_csum,
+	.get_tx_csum            = e1000_get_tx_csum,
+	.set_tx_csum            = e1000_set_tx_csum,
+	.get_sg                 = ethtool_op_get_sg,
+	.set_sg                 = ethtool_op_set_sg,
 #ifdef NETIF_F_TSO
-	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= e1000_set_tso,
+	.get_tso                = ethtool_op_get_tso,
+	.set_tso                = e1000_set_tso,
 #endif
 	.self_test_count        = e1000_diag_test_count,
 	.self_test              = e1000_diag_test,
@@ -1922,7 +1957,7 @@
 	.phys_id                = e1000_phys_id,
 	.get_stats_count        = e1000_get_stats_count,
 	.get_ethtool_stats      = e1000_get_ethtool_stats,
-	.get_perm_addr		= ethtool_op_get_perm_addr,
+	.get_perm_addr          = ethtool_op_get_perm_addr,
 };
 
 void e1000_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index b3b9191..4b54c48 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -31,6 +31,7 @@
  * Shared functions for accessing and configuring the MAC
  */
 
+
 #include "e1000_hw.h"
 
 static int32_t e1000_set_phy_type(struct e1000_hw *hw);
@@ -166,10 +167,10 @@
 {
     DEBUGFUNC("e1000_set_phy_type");
 
-    if(hw->mac_type == e1000_undefined)
+    if (hw->mac_type == e1000_undefined)
         return -E1000_ERR_PHY_TYPE;
 
-    switch(hw->phy_id) {
+    switch (hw->phy_id) {
     case M88E1000_E_PHY_ID:
     case M88E1000_I_PHY_ID:
     case M88E1011_I_PHY_ID:
@@ -177,10 +178,10 @@
         hw->phy_type = e1000_phy_m88;
         break;
     case IGP01E1000_I_PHY_ID:
-        if(hw->mac_type == e1000_82541 ||
-           hw->mac_type == e1000_82541_rev_2 ||
-           hw->mac_type == e1000_82547 ||
-           hw->mac_type == e1000_82547_rev_2) {
+        if (hw->mac_type == e1000_82541 ||
+            hw->mac_type == e1000_82541_rev_2 ||
+            hw->mac_type == e1000_82547 ||
+            hw->mac_type == e1000_82547_rev_2) {
             hw->phy_type = e1000_phy_igp;
             break;
         }
@@ -207,6 +208,7 @@
     return E1000_SUCCESS;
 }
 
+
 /******************************************************************************
  * IGP phy init script - initializes the GbE PHY
  *
@@ -220,7 +222,7 @@
 
     DEBUGFUNC("e1000_phy_init_script");
 
-    if(hw->phy_init_script) {
+    if (hw->phy_init_script) {
         msec_delay(20);
 
         /* Save off the current value of register 0x2F5B to be restored at
@@ -236,7 +238,7 @@
 
         msec_delay(5);
 
-        switch(hw->mac_type) {
+        switch (hw->mac_type) {
         case e1000_82541:
         case e1000_82547:
             e1000_write_phy_reg(hw, 0x1F95, 0x0001);
@@ -273,22 +275,22 @@
         /* Now enable the transmitter */
         e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
 
-        if(hw->mac_type == e1000_82547) {
+        if (hw->mac_type == e1000_82547) {
             uint16_t fused, fine, coarse;
 
             /* Move to analog registers page */
             e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
 
-            if(!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+            if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
                 e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused);
 
                 fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
                 coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
 
-                if(coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+                if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
                     coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10;
                     fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
-                } else if(coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+                } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
                     fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
 
                 fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
@@ -387,6 +389,7 @@
     case E1000_DEV_ID_82571EB_COPPER:
     case E1000_DEV_ID_82571EB_FIBER:
     case E1000_DEV_ID_82571EB_SERDES:
+    case E1000_DEV_ID_82571EB_QUAD_COPPER:
             hw->mac_type = e1000_82571;
         break;
     case E1000_DEV_ID_82572EI_COPPER:
@@ -418,7 +421,7 @@
         return -E1000_ERR_MAC_TYPE;
     }
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_ich8lan:
         hw->swfwhw_semaphore_present = TRUE;
         hw->asf_firmware_present = TRUE;
@@ -456,7 +459,7 @@
 
     DEBUGFUNC("e1000_set_media_type");
 
-    if(hw->mac_type != e1000_82543) {
+    if (hw->mac_type != e1000_82543) {
         /* tbi_compatibility is only valid on 82543 */
         hw->tbi_compatibility_en = FALSE;
     }
@@ -516,16 +519,16 @@
     DEBUGFUNC("e1000_reset_hw");
 
     /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
-    if(hw->mac_type == e1000_82542_rev2_0) {
+    if (hw->mac_type == e1000_82542_rev2_0) {
         DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
         e1000_pci_clear_mwi(hw);
     }
 
-    if(hw->bus_type == e1000_bus_type_pci_express) {
+    if (hw->bus_type == e1000_bus_type_pci_express) {
         /* Prevent the PCI-E bus from sticking if there is no TLP connection
          * on the last TLP read/write transaction when MAC is reset.
          */
-        if(e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
+        if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
             DEBUGOUT("PCI-E Master disable polling has failed.\n");
         }
     }
@@ -553,14 +556,14 @@
     ctrl = E1000_READ_REG(hw, CTRL);
 
     /* Must reset the PHY before resetting the MAC */
-    if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
         E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST));
         msec_delay(5);
     }
 
     /* Must acquire the MDIO ownership before MAC reset.
      * Ownership defaults to firmware after a reset. */
-    if(hw->mac_type == e1000_82573) {
+    if (hw->mac_type == e1000_82573) {
         timeout = 10;
 
         extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
@@ -570,14 +573,14 @@
             E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
             extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
 
-            if(extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+            if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
                 break;
             else
                 extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 
             msec_delay(2);
             timeout--;
-        } while(timeout);
+        } while (timeout);
     }
 
     /* Workaround for ICH8 bit corruption issue in FIFO memory */
@@ -595,7 +598,7 @@
      */
     DEBUGOUT("Issuing a global reset to MAC\n");
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
         case e1000_82544:
         case e1000_82540:
         case e1000_82545:
@@ -634,7 +637,7 @@
      * device.  Later controllers reload the EEPROM automatically, so just wait
      * for reload to complete.
      */
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
         case e1000_82542_rev2_0:
         case e1000_82542_rev2_1:
         case e1000_82543:
@@ -669,7 +672,7 @@
         case e1000_ich8lan:
         case e1000_80003es2lan:
             ret_val = e1000_get_auto_rd_done(hw);
-            if(ret_val)
+            if (ret_val)
                 /* We don't want to continue accessing MAC registers. */
                 return ret_val;
             break;
@@ -680,13 +683,13 @@
     }
 
     /* Disable HW ARPs on ASF enabled adapters */
-    if(hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
+    if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
         manc = E1000_READ_REG(hw, MANC);
         manc &= ~(E1000_MANC_ARP_EN);
         E1000_WRITE_REG(hw, MANC, manc);
     }
 
-    if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
         e1000_phy_init_script(hw);
 
         /* Configure activity LED after PHY reset */
@@ -704,8 +707,8 @@
     icr = E1000_READ_REG(hw, ICR);
 
     /* If MWI was previously enabled, reenable it. */
-    if(hw->mac_type == e1000_82542_rev2_0) {
-        if(hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
+    if (hw->mac_type == e1000_82542_rev2_0) {
+        if (hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
             e1000_pci_set_mwi(hw);
     }
 
@@ -745,9 +748,20 @@
 
     DEBUGFUNC("e1000_init_hw");
 
+    /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */
+    if (hw->mac_type == e1000_ich8lan) {
+        reg_data = E1000_READ_REG(hw, TARC0);
+        reg_data |= 0x30000000;
+        E1000_WRITE_REG(hw, TARC0, reg_data);
+
+        reg_data = E1000_READ_REG(hw, STATUS);
+        reg_data &= ~0x80000000;
+        E1000_WRITE_REG(hw, STATUS, reg_data);
+    }
+
     /* Initialize Identification LED */
     ret_val = e1000_id_led_init(hw);
-    if(ret_val) {
+    if (ret_val) {
         DEBUGOUT("Error Initializing Identification LED\n");
         return ret_val;
     }
@@ -765,7 +779,7 @@
     }
 
     /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
-    if(hw->mac_type == e1000_82542_rev2_0) {
+    if (hw->mac_type == e1000_82542_rev2_0) {
         DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
         e1000_pci_clear_mwi(hw);
         E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST);
@@ -779,11 +793,11 @@
     e1000_init_rx_addrs(hw);
 
     /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
-    if(hw->mac_type == e1000_82542_rev2_0) {
+    if (hw->mac_type == e1000_82542_rev2_0) {
         E1000_WRITE_REG(hw, RCTL, 0);
         E1000_WRITE_FLUSH(hw);
         msec_delay(1);
-        if(hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
+        if (hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE)
             e1000_pci_set_mwi(hw);
     }
 
@@ -792,7 +806,7 @@
     mta_size = E1000_MC_TBL_SIZE;
     if (hw->mac_type == e1000_ich8lan)
         mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
-    for(i = 0; i < mta_size; i++) {
+    for (i = 0; i < mta_size; i++) {
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
         /* use write flush to prevent Memory Write Block (MWB) from
          * occuring when accessing our register space */
@@ -804,18 +818,18 @@
      * gives equal priority to transmits and receives.  Valid only on
      * 82542 and 82543 silicon.
      */
-    if(hw->dma_fairness && hw->mac_type <= e1000_82543) {
+    if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
         ctrl = E1000_READ_REG(hw, CTRL);
         E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR);
     }
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82545_rev_3:
     case e1000_82546_rev_3:
         break;
     default:
         /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
-        if(hw->bus_type == e1000_bus_type_pcix) {
+        if (hw->bus_type == e1000_bus_type_pcix) {
             e1000_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd_word);
             e1000_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI,
                 &pcix_stat_hi_word);
@@ -823,9 +837,9 @@
                 PCIX_COMMAND_MMRBC_SHIFT;
             stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >>
                 PCIX_STATUS_HI_MMRBC_SHIFT;
-            if(stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
+            if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
                 stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K;
-            if(cmd_mmrbc > stat_mmrbc) {
+            if (cmd_mmrbc > stat_mmrbc) {
                 pcix_cmd_word &= ~PCIX_COMMAND_MMRBC_MASK;
                 pcix_cmd_word |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT;
                 e1000_write_pci_cfg(hw, PCIX_COMMAND_REGISTER,
@@ -843,7 +857,7 @@
     ret_val = e1000_setup_link(hw);
 
     /* Set the transmit descriptor write-back policy */
-    if(hw->mac_type > e1000_82544) {
+    if (hw->mac_type > e1000_82544) {
         ctrl = E1000_READ_REG(hw, TXDCTL);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
         switch (hw->mac_type) {
@@ -894,14 +908,13 @@
     case e1000_ich8lan:
         ctrl = E1000_READ_REG(hw, TXDCTL1);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        if(hw->mac_type >= e1000_82571)
+        if (hw->mac_type >= e1000_82571)
             ctrl |= E1000_TXDCTL_COUNT_DESC;
         E1000_WRITE_REG(hw, TXDCTL1, ctrl);
         break;
     }
 
 
-
     if (hw->mac_type == e1000_82573) {
         uint32_t gcr = E1000_READ_REG(hw, GCR);
         gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
@@ -945,10 +958,10 @@
 
     DEBUGFUNC("e1000_adjust_serdes_amplitude");
 
-    if(hw->media_type != e1000_media_type_internal_serdes)
+    if (hw->media_type != e1000_media_type_internal_serdes)
         return E1000_SUCCESS;
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82545_rev_3:
     case e1000_82546_rev_3:
         break;
@@ -961,11 +974,11 @@
         return ret_val;
     }
 
-    if(eeprom_data != EEPROM_RESERVED_WORD) {
+    if (eeprom_data != EEPROM_RESERVED_WORD) {
         /* Adjust SERDES output amplitude only. */
         eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
         ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
@@ -1033,10 +1046,10 @@
      * in case we get disconnected and then reconnected into a different
      * hub or switch with different Flow Control capabilities.
      */
-    if(hw->mac_type == e1000_82542_rev2_0)
+    if (hw->mac_type == e1000_82542_rev2_0)
         hw->fc &= (~e1000_fc_tx_pause);
 
-    if((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+    if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
         hw->fc &= (~e1000_fc_rx_pause);
 
     hw->original_fc = hw->fc;
@@ -1051,12 +1064,12 @@
      * or e1000_phy_setup() is called.
      */
     if (hw->mac_type == e1000_82543) {
-		ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
-									1, &eeprom_data);
-		if (ret_val) {
-			DEBUGOUT("EEPROM Read Error\n");
-			return -E1000_ERR_EEPROM;
-		}
+        ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+                                    1, &eeprom_data);
+        if (ret_val) {
+            DEBUGOUT("EEPROM Read Error\n");
+            return -E1000_ERR_EEPROM;
+        }
         ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
                     SWDPIO__EXT_SHIFT);
         E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
@@ -1089,14 +1102,14 @@
      * ability to transmit pause frames in not enabled, then these
      * registers will be set to 0.
      */
-    if(!(hw->fc & e1000_fc_tx_pause)) {
+    if (!(hw->fc & e1000_fc_tx_pause)) {
         E1000_WRITE_REG(hw, FCRTL, 0);
         E1000_WRITE_REG(hw, FCRTH, 0);
     } else {
         /* We need to set up the Receive Threshold high and low water marks
          * as well as (optionally) enabling the transmission of XON frames.
          */
-        if(hw->fc_send_xon) {
+        if (hw->fc_send_xon) {
             E1000_WRITE_REG(hw, FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
             E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
         } else {
@@ -1143,11 +1156,11 @@
      * the EEPROM.
      */
     ctrl = E1000_READ_REG(hw, CTRL);
-    if(hw->media_type == e1000_media_type_fiber)
+    if (hw->media_type == e1000_media_type_fiber)
         signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
 
     ret_val = e1000_adjust_serdes_amplitude(hw);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* Take the link out of reset */
@@ -1155,7 +1168,7 @@
 
     /* Adjust VCO speed to improve BER performance */
     ret_val = e1000_set_vco_speed(hw);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     e1000_config_collision_dist(hw);
@@ -1226,15 +1239,15 @@
      * less than 500 milliseconds even if the other end is doing it in SW).
      * For internal serdes, we just assume a signal is present, then poll.
      */
-    if(hw->media_type == e1000_media_type_internal_serdes ||
+    if (hw->media_type == e1000_media_type_internal_serdes ||
        (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) {
         DEBUGOUT("Looking for Link\n");
-        for(i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+        for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
             msec_delay(10);
             status = E1000_READ_REG(hw, STATUS);
-            if(status & E1000_STATUS_LU) break;
+            if (status & E1000_STATUS_LU) break;
         }
-        if(i == (LINK_UP_TIMEOUT / 10)) {
+        if (i == (LINK_UP_TIMEOUT / 10)) {
             DEBUGOUT("Never got a valid link from auto-neg!!!\n");
             hw->autoneg_failed = 1;
             /* AutoNeg failed to achieve a link, so we'll call
@@ -1243,7 +1256,7 @@
              * non-autonegotiating link partners.
              */
             ret_val = e1000_check_for_link(hw);
-            if(ret_val) {
+            if (ret_val) {
                 DEBUGOUT("Error while checking for link\n");
                 return ret_val;
             }
@@ -1277,7 +1290,7 @@
      * the PHY speed and duplex configuration is. In addition, we need to
      * perform a hardware reset on the PHY to take it out of reset.
      */
-    if(hw->mac_type > e1000_82543) {
+    if (hw->mac_type > e1000_82543) {
         ctrl |= E1000_CTRL_SLU;
         ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
         E1000_WRITE_REG(hw, CTRL, ctrl);
@@ -1285,13 +1298,13 @@
         ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
         E1000_WRITE_REG(hw, CTRL, ctrl);
         ret_val = e1000_phy_hw_reset(hw);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
     /* Make sure we have a valid PHY */
     ret_val = e1000_detect_gig_phy(hw);
-    if(ret_val) {
+    if (ret_val) {
         DEBUGOUT("Error, did not detect valid phy.\n");
         return ret_val;
     }
@@ -1299,19 +1312,19 @@
 
     /* Set PHY to class A mode (if necessary) */
     ret_val = e1000_set_phy_mode(hw);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
-    if((hw->mac_type == e1000_82545_rev_3) ||
+    if ((hw->mac_type == e1000_82545_rev_3) ||
        (hw->mac_type == e1000_82546_rev_3)) {
         ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
         phy_data |= 0x00000008;
         ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
     }
 
-    if(hw->mac_type <= e1000_82543 ||
-       hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
-       hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
+    if (hw->mac_type <= e1000_82543 ||
+        hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+        hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
         hw->phy_reset_disable = FALSE;
 
    return E1000_SUCCESS;
@@ -1341,7 +1354,7 @@
         return ret_val;
     }
 
-    /* Wait 10ms for MAC to configure PHY from eeprom settings */
+    /* Wait 15ms for MAC to configure PHY from eeprom settings */
     msec_delay(15);
     if (hw->mac_type != e1000_ich8lan) {
     /* Configure activity LED after PHY reset */
@@ -1351,11 +1364,14 @@
     E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
     }
 
-    /* disable lplu d3 during driver init */
-    ret_val = e1000_set_d3_lplu_state(hw, FALSE);
-    if (ret_val) {
-        DEBUGOUT("Error Disabling LPLU D3\n");
-        return ret_val;
+    /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+    if (hw->phy_type == e1000_phy_igp) {
+        /* disable lplu d3 during driver init */
+        ret_val = e1000_set_d3_lplu_state(hw, FALSE);
+        if (ret_val) {
+            DEBUGOUT("Error Disabling LPLU D3\n");
+            return ret_val;
+        }
     }
 
     /* disable lplu d0 during driver init */
@@ -1393,45 +1409,45 @@
         }
     }
     ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* set auto-master slave resolution settings */
-    if(hw->autoneg) {
+    if (hw->autoneg) {
         e1000_ms_type phy_ms_setting = hw->master_slave;
 
-        if(hw->ffe_config_state == e1000_ffe_config_active)
+        if (hw->ffe_config_state == e1000_ffe_config_active)
             hw->ffe_config_state = e1000_ffe_config_enabled;
 
-        if(hw->dsp_config_state == e1000_dsp_config_activated)
+        if (hw->dsp_config_state == e1000_dsp_config_activated)
             hw->dsp_config_state = e1000_dsp_config_enabled;
 
         /* when autonegotiation advertisment is only 1000Mbps then we
           * should disable SmartSpeed and enable Auto MasterSlave
           * resolution as hardware default. */
-        if(hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+        if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
             /* Disable SmartSpeed */
-            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
-            if(ret_val)
+            ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+                                         &phy_data);
+            if (ret_val)
                 return ret_val;
             phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-            ret_val = e1000_write_phy_reg(hw,
-                                                  IGP01E1000_PHY_PORT_CONFIG,
-                                                  phy_data);
-            if(ret_val)
+            ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+                                          phy_data);
+            if (ret_val)
                 return ret_val;
             /* Set auto Master/Slave resolution process */
             ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
             phy_data &= ~CR_1000T_MS_ENABLE;
             ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         }
 
         ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* load defaults for future use */
@@ -1455,7 +1471,7 @@
             break;
         }
         ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
@@ -1476,12 +1492,12 @@
 
     DEBUGFUNC("e1000_copper_link_ggp_setup");
 
-    if(!hw->phy_reset_disable) {
+    if (!hw->phy_reset_disable) {
 
         /* Enable CRS on TX for half-duplex operation. */
         ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
                                      &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
@@ -1490,7 +1506,7 @@
 
         ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
                                       phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* Options:
@@ -1501,7 +1517,7 @@
          *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
          */
         ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
@@ -1526,11 +1542,11 @@
          *   1 - Enabled
          */
         phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
-        if(hw->disable_polarity_correction == 1)
+        if (hw->disable_polarity_correction == 1)
             phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
         ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
 
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* SW Reset the PHY so all changes take effect */
@@ -1586,9 +1602,9 @@
                 return ret_val;
 
             phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-
             ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
                                           phy_data);
+
             if (ret_val)
                 return ret_val;
         }
@@ -1623,12 +1639,12 @@
 
     DEBUGFUNC("e1000_copper_link_mgp_setup");
 
-    if(hw->phy_reset_disable)
+    if (hw->phy_reset_disable)
         return E1000_SUCCESS;
 
     /* Enable CRS on TX. This must be set for half-duplex operation. */
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
@@ -1665,7 +1681,7 @@
      *   1 - Enabled
      */
     phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
-    if(hw->disable_polarity_correction == 1)
+    if (hw->disable_polarity_correction == 1)
         phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
     if (ret_val)
@@ -1705,7 +1721,7 @@
 
     /* SW Reset the PHY so all changes take effect */
     ret_val = e1000_phy_reset(hw);
-    if(ret_val) {
+    if (ret_val) {
         DEBUGOUT("Error Resetting the PHY\n");
         return ret_val;
     }
@@ -1735,7 +1751,7 @@
     /* If autoneg_advertised is zero, we assume it was not defaulted
      * by the calling code so we set to advertise full capability.
      */
-    if(hw->autoneg_advertised == 0)
+    if (hw->autoneg_advertised == 0)
         hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
     /* IFE phy only supports 10/100 */
@@ -1744,7 +1760,7 @@
 
     DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
     ret_val = e1000_phy_setup_autoneg(hw);
-    if(ret_val) {
+    if (ret_val) {
         DEBUGOUT("Error Setting up Auto-Negotiation\n");
         return ret_val;
     }
@@ -1754,20 +1770,20 @@
      * the Auto Neg Restart bit in the PHY control register.
      */
     ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
     ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* Does the user want to wait for Auto-Neg to complete here, or
      * check at a later time (for example, callback routine).
      */
-    if(hw->wait_autoneg_complete) {
+    if (hw->wait_autoneg_complete) {
         ret_val = e1000_wait_autoneg(hw);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error while waiting for autoneg to complete\n");
             return ret_val;
         }
@@ -1778,7 +1794,6 @@
     return E1000_SUCCESS;
 }
 
-
 /******************************************************************************
 * Config the MAC and the PHY after link is up.
 *   1) Set up the MAC to the current PHY speed/duplex
@@ -1797,25 +1812,25 @@
     int32_t ret_val;
     DEBUGFUNC("e1000_copper_link_postconfig");
 
-    if(hw->mac_type >= e1000_82544) {
+    if (hw->mac_type >= e1000_82544) {
         e1000_config_collision_dist(hw);
     } else {
         ret_val = e1000_config_mac_to_phy(hw);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error configuring MAC to PHY settings\n");
             return ret_val;
         }
     }
     ret_val = e1000_config_fc_after_link_up(hw);
-    if(ret_val) {
+    if (ret_val) {
         DEBUGOUT("Error Configuring Flow Control\n");
         return ret_val;
     }
 
     /* Config DSP to improve Giga link quality */
-    if(hw->phy_type == e1000_phy_igp) {
+    if (hw->phy_type == e1000_phy_igp) {
         ret_val = e1000_config_dsp_after_link_change(hw, TRUE);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error Configuring DSP after link up\n");
             return ret_val;
         }
@@ -1861,7 +1876,7 @@
 
     /* Check if it is a valid PHY and set PHY mode if necessary. */
     ret_val = e1000_copper_link_preconfig(hw);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     switch (hw->mac_type) {
@@ -1882,30 +1897,30 @@
         hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) {
         ret_val = e1000_copper_link_igp_setup(hw);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     } else if (hw->phy_type == e1000_phy_m88) {
         ret_val = e1000_copper_link_mgp_setup(hw);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     } else if (hw->phy_type == e1000_phy_gg82563) {
         ret_val = e1000_copper_link_ggp_setup(hw);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
-    if(hw->autoneg) {
+    if (hw->autoneg) {
         /* Setup autoneg and flow control advertisement
           * and perform autonegotiation */
         ret_val = e1000_copper_link_autoneg(hw);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     } else {
         /* PHY will be set to 10H, 10F, 100H,or 100F
           * depending on value from forced_speed_duplex. */
         DEBUGOUT("Forcing speed and duplex\n");
         ret_val = e1000_phy_force_speed_duplex(hw);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error Forcing Speed and Duplex\n");
             return ret_val;
         }
@@ -1914,18 +1929,18 @@
     /* Check link status. Wait up to 100 microseconds for link to become
      * valid.
      */
-    for(i = 0; i < 10; i++) {
+    for (i = 0; i < 10; i++) {
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if(phy_data & MII_SR_LINK_STATUS) {
+        if (phy_data & MII_SR_LINK_STATUS) {
             /* Config the MAC and PHY after link is up */
             ret_val = e1000_copper_link_postconfig(hw);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             DEBUGOUT("Valid link established!!!\n");
@@ -2027,7 +2042,7 @@
 
     /* Read the MII Auto-Neg Advertisement Register (Address 4). */
     ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     if (hw->phy_type != e1000_phy_ife) {
@@ -2055,36 +2070,36 @@
     DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
 
     /* Do we want to advertise 10 Mb Half Duplex? */
-    if(hw->autoneg_advertised & ADVERTISE_10_HALF) {
+    if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
         DEBUGOUT("Advertise 10mb Half duplex\n");
         mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
     }
 
     /* Do we want to advertise 10 Mb Full Duplex? */
-    if(hw->autoneg_advertised & ADVERTISE_10_FULL) {
+    if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
         DEBUGOUT("Advertise 10mb Full duplex\n");
         mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
     }
 
     /* Do we want to advertise 100 Mb Half Duplex? */
-    if(hw->autoneg_advertised & ADVERTISE_100_HALF) {
+    if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
         DEBUGOUT("Advertise 100mb Half duplex\n");
         mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
     }
 
     /* Do we want to advertise 100 Mb Full Duplex? */
-    if(hw->autoneg_advertised & ADVERTISE_100_FULL) {
+    if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
         DEBUGOUT("Advertise 100mb Full duplex\n");
         mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
     }
 
     /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
-    if(hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+    if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
         DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n");
     }
 
     /* Do we want to advertise 1000 Mb Full Duplex? */
-    if(hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+    if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
         DEBUGOUT("Advertise 1000mb Full duplex\n");
         mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
         if (hw->phy_type == e1000_phy_ife) {
@@ -2146,7 +2161,7 @@
     }
 
     ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
@@ -2194,7 +2209,7 @@
 
     /* Read the MII Control Register. */
     ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* We need to disable autoneg in order to force link and duplex. */
@@ -2202,8 +2217,8 @@
     mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
 
     /* Are we forcing Full or Half Duplex? */
-    if(hw->forced_speed_duplex == e1000_100_full ||
-       hw->forced_speed_duplex == e1000_10_full) {
+    if (hw->forced_speed_duplex == e1000_100_full ||
+        hw->forced_speed_duplex == e1000_10_full) {
         /* We want to force full duplex so we SET the full duplex bits in the
          * Device and MII Control Registers.
          */
@@ -2220,7 +2235,7 @@
     }
 
     /* Are we forcing 100Mbps??? */
-    if(hw->forced_speed_duplex == e1000_100_full ||
+    if (hw->forced_speed_duplex == e1000_100_full ||
        hw->forced_speed_duplex == e1000_100_half) {
         /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
         ctrl |= E1000_CTRL_SPD_100;
@@ -2243,7 +2258,7 @@
     if ((hw->phy_type == e1000_phy_m88) ||
         (hw->phy_type == e1000_phy_gg82563)) {
         ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
@@ -2251,7 +2266,7 @@
          */
         phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
         ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
@@ -2275,20 +2290,20 @@
          * forced whenever speed or duplex are forced.
          */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
         phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
 
         ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
     /* Write back the modified PHY MII control register. */
     ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     udelay(1);
@@ -2300,50 +2315,50 @@
      * only if the user has set wait_autoneg_complete to 1, which is
      * the default.
      */
-    if(hw->wait_autoneg_complete) {
+    if (hw->wait_autoneg_complete) {
         /* We will wait for autoneg to complete. */
         DEBUGOUT("Waiting for forced speed/duplex link.\n");
         mii_status_reg = 0;
 
         /* We will wait for autoneg to complete or 4.5 seconds to expire. */
-        for(i = PHY_FORCE_TIME; i > 0; i--) {
+        for (i = PHY_FORCE_TIME; i > 0; i--) {
             /* Read the MII Status Register and wait for Auto-Neg Complete bit
              * to be set.
              */
             ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
-            if(mii_status_reg & MII_SR_LINK_STATUS) break;
+            if (mii_status_reg & MII_SR_LINK_STATUS) break;
             msec_delay(100);
         }
-        if((i == 0) &&
+        if ((i == 0) &&
            ((hw->phy_type == e1000_phy_m88) ||
             (hw->phy_type == e1000_phy_gg82563))) {
             /* We didn't get link.  Reset the DSP and wait again for link. */
             ret_val = e1000_phy_reset_dsp(hw);
-            if(ret_val) {
+            if (ret_val) {
                 DEBUGOUT("Error Resetting PHY DSP\n");
                 return ret_val;
             }
         }
         /* This loop will early-out if the link condition has been met.  */
-        for(i = PHY_FORCE_TIME; i > 0; i--) {
-            if(mii_status_reg & MII_SR_LINK_STATUS) break;
+        for (i = PHY_FORCE_TIME; i > 0; i--) {
+            if (mii_status_reg & MII_SR_LINK_STATUS) break;
             msec_delay(100);
             /* Read the MII Status Register and wait for Auto-Neg Complete bit
              * to be set.
              */
             ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         }
     }
@@ -2354,32 +2369,31 @@
          * defaults back to a 2.5MHz clock when the PHY is reset.
          */
         ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data |= M88E1000_EPSCR_TX_CLK_25;
         ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* In addition, because of the s/w reset above, we need to enable CRS on
          * TX.  This must be set for both full and half duplex operation.
          */
         ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
         ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
-           (!hw->autoneg) &&
-           (hw->forced_speed_duplex == e1000_10_full ||
-            hw->forced_speed_duplex == e1000_10_half)) {
+        if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
+            (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full ||
+             hw->forced_speed_duplex == e1000_10_half)) {
             ret_val = e1000_polarity_reversal_workaround(hw);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         }
     } else if (hw->phy_type == e1000_phy_gg82563) {
@@ -2470,10 +2484,10 @@
      * registers depending on negotiated values.
      */
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
-    if(phy_data & M88E1000_PSSR_DPLX)
+    if (phy_data & M88E1000_PSSR_DPLX)
         ctrl |= E1000_CTRL_FD;
     else
         ctrl &= ~E1000_CTRL_FD;
@@ -2483,9 +2497,9 @@
     /* Set up speed in the Device Control register depending on
      * negotiated values.
      */
-    if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+    if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
         ctrl |= E1000_CTRL_SPD_1000;
-    else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+    else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
         ctrl |= E1000_CTRL_SPD_100;
 
     /* Write the configured values back to the Device Control Reg. */
@@ -2553,7 +2567,7 @@
     }
 
     /* Disable TX Flow Control for 82542 (rev 2.0) */
-    if(hw->mac_type == e1000_82542_rev2_0)
+    if (hw->mac_type == e1000_82542_rev2_0)
         ctrl &= (~E1000_CTRL_TFCE);
 
     E1000_WRITE_REG(hw, CTRL, ctrl);
@@ -2587,11 +2601,12 @@
      * so we had to force link.  In this case, we need to force the
      * configuration of the MAC to match the "fc" parameter.
      */
-    if(((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
-       ((hw->media_type == e1000_media_type_internal_serdes) && (hw->autoneg_failed)) ||
-       ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) {
+    if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
+        ((hw->media_type == e1000_media_type_internal_serdes) &&
+         (hw->autoneg_failed)) ||
+        ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) {
         ret_val = e1000_force_mac_fc(hw);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error forcing flow control settings\n");
             return ret_val;
         }
@@ -2602,19 +2617,19 @@
      * has completed, and if so, how the PHY and link partner has
      * flow control configured.
      */
-    if((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+    if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
         /* Read the MII Status Register and check to see if AutoNeg
          * has completed.  We read this twice because this reg has
          * some "sticky" (latched) bits.
          */
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if(mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+        if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
             /* The AutoNeg process has completed, so we now need to
              * read both the Auto Negotiation Advertisement Register
              * (Address 4) and the Auto_Negotiation Base Page Ability
@@ -2623,11 +2638,11 @@
              */
             ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
                                          &mii_nway_adv_reg);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
             ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
                                          &mii_nway_lp_ability_reg);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             /* Two bits in the Auto Negotiation Advertisement Register
@@ -2664,15 +2679,15 @@
              *   1   |   DC    |   1   |   DC    | e1000_fc_full
              *
              */
-            if((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-               (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+            if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+                (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
                 /* Now we need to check if the user selected RX ONLY
                  * of pause frames.  In this case, we had to advertise
                  * FULL flow control because we could not advertise RX
                  * ONLY. Hence, we must now check to see if we need to
                  * turn OFF  the TRANSMISSION of PAUSE frames.
                  */
-                if(hw->original_fc == e1000_fc_full) {
+                if (hw->original_fc == e1000_fc_full) {
                     hw->fc = e1000_fc_full;
                     DEBUGOUT("Flow Control = FULL.\n");
                 } else {
@@ -2688,10 +2703,10 @@
              *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
              *
              */
-            else if(!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-                    (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-                    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-                    (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+            else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+                     (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+                     (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+                     (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                 hw->fc = e1000_fc_tx_pause;
                 DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
             }
@@ -2703,10 +2718,10 @@
              *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
              *
              */
-            else if((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-                    (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-                    !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-                    (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+            else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+                     (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+                     !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+                     (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
                 hw->fc = e1000_fc_rx_pause;
                 DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
             }
@@ -2730,9 +2745,9 @@
              * be asked to delay transmission of packets than asking
              * our link partner to pause transmission of frames.
              */
-            else if((hw->original_fc == e1000_fc_none ||
-                     hw->original_fc == e1000_fc_tx_pause) ||
-                    hw->fc_strict_ieee) {
+            else if ((hw->original_fc == e1000_fc_none ||
+                      hw->original_fc == e1000_fc_tx_pause) ||
+                      hw->fc_strict_ieee) {
                 hw->fc = e1000_fc_none;
                 DEBUGOUT("Flow Control = NONE.\n");
             } else {
@@ -2745,19 +2760,19 @@
              * enabled per IEEE 802.3 spec.
              */
             ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
-            if(ret_val) {
+            if (ret_val) {
                 DEBUGOUT("Error getting link speed and duplex\n");
                 return ret_val;
             }
 
-            if(duplex == HALF_DUPLEX)
+            if (duplex == HALF_DUPLEX)
                 hw->fc = e1000_fc_none;
 
             /* Now we call a subroutine to actually force the MAC
              * controller to use the correct flow control settings.
              */
             ret_val = e1000_force_mac_fc(hw);
-            if(ret_val) {
+            if (ret_val) {
                 DEBUGOUT("Error forcing flow control settings\n");
                 return ret_val;
             }
@@ -2796,13 +2811,13 @@
      * set when the optics detect a signal. On older adapters, it will be
      * cleared when there is a signal.  This applies to fiber media only.
      */
-    if((hw->media_type == e1000_media_type_fiber) ||
-       (hw->media_type == e1000_media_type_internal_serdes)) {
+    if ((hw->media_type == e1000_media_type_fiber) ||
+        (hw->media_type == e1000_media_type_internal_serdes)) {
         rxcw = E1000_READ_REG(hw, RXCW);
 
-        if(hw->media_type == e1000_media_type_fiber) {
+        if (hw->media_type == e1000_media_type_fiber) {
             signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
-            if(status & E1000_STATUS_LU)
+            if (status & E1000_STATUS_LU)
                 hw->get_link_status = FALSE;
         }
     }
@@ -2813,20 +2828,20 @@
      * receive a Link Status Change interrupt or we have Rx Sequence
      * Errors.
      */
-    if((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+    if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
         /* First we want to see if the MII Status Register reports
          * link.  If so, then we want to get the current speed/duplex
          * of the PHY.
          * Read the register twice since the link bit is sticky.
          */
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if(phy_data & MII_SR_LINK_STATUS) {
+        if (phy_data & MII_SR_LINK_STATUS) {
             hw->get_link_status = FALSE;
             /* Check if there was DownShift, must be checked immediately after
              * link-up */
@@ -2840,10 +2855,10 @@
              * happen due to the execution of this workaround.
              */
 
-            if((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
-               (!hw->autoneg) &&
-               (hw->forced_speed_duplex == e1000_10_full ||
-                hw->forced_speed_duplex == e1000_10_half)) {
+            if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
+                (!hw->autoneg) &&
+                (hw->forced_speed_duplex == e1000_10_full ||
+                 hw->forced_speed_duplex == e1000_10_half)) {
                 E1000_WRITE_REG(hw, IMC, 0xffffffff);
                 ret_val = e1000_polarity_reversal_workaround(hw);
                 icr = E1000_READ_REG(hw, ICR);
@@ -2860,7 +2875,7 @@
         /* If we are forcing speed/duplex, then we simply return since
          * we have already determined whether we have link or not.
          */
-        if(!hw->autoneg) return -E1000_ERR_CONFIG;
+        if (!hw->autoneg) return -E1000_ERR_CONFIG;
 
         /* optimize the dsp settings for the igp phy */
         e1000_config_dsp_after_link_change(hw, TRUE);
@@ -2873,11 +2888,11 @@
          * speed/duplex on the MAC to the current PHY speed/duplex
          * settings.
          */
-        if(hw->mac_type >= e1000_82544)
+        if (hw->mac_type >= e1000_82544)
             e1000_config_collision_dist(hw);
         else {
             ret_val = e1000_config_mac_to_phy(hw);
-            if(ret_val) {
+            if (ret_val) {
                 DEBUGOUT("Error configuring MAC to PHY settings\n");
                 return ret_val;
             }
@@ -2888,7 +2903,7 @@
          * have had to re-autoneg with a different link partner.
          */
         ret_val = e1000_config_fc_after_link_up(hw);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error configuring flow control\n");
             return ret_val;
         }
@@ -2900,7 +2915,7 @@
          * at gigabit speed, then TBI compatibility is not needed.  If we are
          * at gigabit speed, we turn on TBI compatibility.
          */
-        if(hw->tbi_compatibility_en) {
+        if (hw->tbi_compatibility_en) {
             uint16_t speed, duplex;
             ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
             if (ret_val) {
@@ -2911,7 +2926,7 @@
                 /* If link speed is not set to gigabit speed, we do not need
                  * to enable TBI compatibility.
                  */
-                if(hw->tbi_compatibility_on) {
+                if (hw->tbi_compatibility_on) {
                     /* If we previously were in the mode, turn it off. */
                     rctl = E1000_READ_REG(hw, RCTL);
                     rctl &= ~E1000_RCTL_SBP;
@@ -2924,7 +2939,7 @@
                  * packets. Some frames have an additional byte on the end and
                  * will look like CRC errors to to the hardware.
                  */
-                if(!hw->tbi_compatibility_on) {
+                if (!hw->tbi_compatibility_on) {
                     hw->tbi_compatibility_on = TRUE;
                     rctl = E1000_READ_REG(hw, RCTL);
                     rctl |= E1000_RCTL_SBP;
@@ -2940,12 +2955,12 @@
      * auto-negotiation time to complete, in case the cable was just plugged
      * in. The autoneg_failed flag does this.
      */
-    else if((((hw->media_type == e1000_media_type_fiber) &&
+    else if ((((hw->media_type == e1000_media_type_fiber) &&
               ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
-             (hw->media_type == e1000_media_type_internal_serdes)) &&
-            (!(status & E1000_STATUS_LU)) &&
-            (!(rxcw & E1000_RXCW_C))) {
-        if(hw->autoneg_failed == 0) {
+              (hw->media_type == e1000_media_type_internal_serdes)) &&
+              (!(status & E1000_STATUS_LU)) &&
+              (!(rxcw & E1000_RXCW_C))) {
+        if (hw->autoneg_failed == 0) {
             hw->autoneg_failed = 1;
             return 0;
         }
@@ -2961,7 +2976,7 @@
 
         /* Configure Flow Control after forcing link up. */
         ret_val = e1000_config_fc_after_link_up(hw);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error configuring flow control\n");
             return ret_val;
         }
@@ -2971,9 +2986,9 @@
      * Device Control register in an attempt to auto-negotiate with our link
      * partner.
      */
-    else if(((hw->media_type == e1000_media_type_fiber) ||
-             (hw->media_type == e1000_media_type_internal_serdes)) &&
-            (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+    else if (((hw->media_type == e1000_media_type_fiber) ||
+              (hw->media_type == e1000_media_type_internal_serdes)) &&
+              (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
         DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
         E1000_WRITE_REG(hw, TXCW, hw->txcw);
         E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
@@ -2983,12 +2998,12 @@
     /* If we force link for non-auto-negotiation switch, check link status
      * based on MAC synchronization for internal serdes media type.
      */
-    else if((hw->media_type == e1000_media_type_internal_serdes) &&
-            !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
+    else if ((hw->media_type == e1000_media_type_internal_serdes) &&
+             !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
         /* SYNCH bit and IV bit are sticky. */
         udelay(10);
-        if(E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) {
-            if(!(rxcw & E1000_RXCW_IV)) {
+        if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) {
+            if (!(rxcw & E1000_RXCW_IV)) {
                 hw->serdes_link_down = FALSE;
                 DEBUGOUT("SERDES: Link is up.\n");
             }
@@ -2997,8 +3012,8 @@
             DEBUGOUT("SERDES: Link is down.\n");
         }
     }
-    if((hw->media_type == e1000_media_type_internal_serdes) &&
-       (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
+    if ((hw->media_type == e1000_media_type_internal_serdes) &&
+        (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
         hw->serdes_link_down = !(E1000_STATUS_LU & E1000_READ_REG(hw, STATUS));
     }
     return E1000_SUCCESS;
@@ -3022,12 +3037,12 @@
 
     DEBUGFUNC("e1000_get_speed_and_duplex");
 
-    if(hw->mac_type >= e1000_82543) {
+    if (hw->mac_type >= e1000_82543) {
         status = E1000_READ_REG(hw, STATUS);
-        if(status & E1000_STATUS_SPEED_1000) {
+        if (status & E1000_STATUS_SPEED_1000) {
             *speed = SPEED_1000;
             DEBUGOUT("1000 Mbs, ");
-        } else if(status & E1000_STATUS_SPEED_100) {
+        } else if (status & E1000_STATUS_SPEED_100) {
             *speed = SPEED_100;
             DEBUGOUT("100 Mbs, ");
         } else {
@@ -3035,7 +3050,7 @@
             DEBUGOUT("10 Mbs, ");
         }
 
-        if(status & E1000_STATUS_FD) {
+        if (status & E1000_STATUS_FD) {
             *duplex = FULL_DUPLEX;
             DEBUGOUT("Full Duplex\n");
         } else {
@@ -3052,18 +3067,18 @@
      * if it is operating at half duplex.  Here we set the duplex settings to
      * match the duplex in the link partner's capabilities.
      */
-    if(hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+    if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
         ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if(!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+        if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
             *duplex = HALF_DUPLEX;
         else {
             ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
-            if((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
+            if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
                (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
                 *duplex = HALF_DUPLEX;
         }
@@ -3104,17 +3119,17 @@
     DEBUGOUT("Waiting for Auto-Neg to complete.\n");
 
     /* We will wait for autoneg to complete or 4.5 seconds to expire. */
-    for(i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+    for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
         /* Read the MII Status Register and wait for Auto-Neg
          * Complete bit to be set.
          */
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
-        if(phy_data & MII_SR_AUTONEG_COMPLETE) {
+        if (phy_data & MII_SR_AUTONEG_COMPLETE) {
             return E1000_SUCCESS;
         }
         msec_delay(100);
@@ -3187,14 +3202,16 @@
     /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
     ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
 
-    while(mask) {
+    while (mask) {
         /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
          * then raising and lowering the Management Data Clock. A "0" is
          * shifted out to the PHY by setting the MDIO bit to "0" and then
          * raising and lowering the clock.
          */
-        if(data & mask) ctrl |= E1000_CTRL_MDIO;
-        else ctrl &= ~E1000_CTRL_MDIO;
+        if (data & mask)
+            ctrl |= E1000_CTRL_MDIO;
+        else
+            ctrl &= ~E1000_CTRL_MDIO;
 
         E1000_WRITE_REG(hw, CTRL, ctrl);
         E1000_WRITE_FLUSH(hw);
@@ -3245,12 +3262,13 @@
     e1000_raise_mdi_clk(hw, &ctrl);
     e1000_lower_mdi_clk(hw, &ctrl);
 
-    for(data = 0, i = 0; i < 16; i++) {
+    for (data = 0, i = 0; i < 16; i++) {
         data = data << 1;
         e1000_raise_mdi_clk(hw, &ctrl);
         ctrl = E1000_READ_REG(hw, CTRL);
         /* Check to see if we shifted in a "1". */
-        if(ctrl & E1000_CTRL_MDIO) data |= 1;
+        if (ctrl & E1000_CTRL_MDIO)
+            data |= 1;
         e1000_lower_mdi_clk(hw, &ctrl);
     }
 
@@ -3276,7 +3294,7 @@
     if (!hw->swfw_sync_present)
         return e1000_get_hw_eeprom_semaphore(hw);
 
-    while(timeout) {
+    while (timeout) {
             if (e1000_get_hw_eeprom_semaphore(hw))
                 return -E1000_ERR_SWFW_SYNC;
 
@@ -3365,7 +3383,7 @@
        (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
         ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
                                          (uint16_t)reg_addr);
-        if(ret_val) {
+        if (ret_val) {
             e1000_swfw_sync_release(hw, swfw);
             return ret_val;
         }
@@ -3410,12 +3428,12 @@
 
     DEBUGFUNC("e1000_read_phy_reg_ex");
 
-    if(reg_addr > MAX_PHY_REG_ADDRESS) {
+    if (reg_addr > MAX_PHY_REG_ADDRESS) {
         DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
         return -E1000_ERR_PARAM;
     }
 
-    if(hw->mac_type > e1000_82543) {
+    if (hw->mac_type > e1000_82543) {
         /* Set up Op-code, Phy Address, and register address in the MDI
          * Control register.  The MAC will take care of interfacing with the
          * PHY to retrieve the desired data.
@@ -3427,16 +3445,16 @@
         E1000_WRITE_REG(hw, MDIC, mdic);
 
         /* Poll the ready bit to see if the MDI read completed */
-        for(i = 0; i < 64; i++) {
+        for (i = 0; i < 64; i++) {
             udelay(50);
             mdic = E1000_READ_REG(hw, MDIC);
-            if(mdic & E1000_MDIC_READY) break;
+            if (mdic & E1000_MDIC_READY) break;
         }
-        if(!(mdic & E1000_MDIC_READY)) {
+        if (!(mdic & E1000_MDIC_READY)) {
             DEBUGOUT("MDI Read did not complete\n");
             return -E1000_ERR_PHY;
         }
-        if(mdic & E1000_MDIC_ERROR) {
+        if (mdic & E1000_MDIC_ERROR) {
             DEBUGOUT("MDI Error\n");
             return -E1000_ERR_PHY;
         }
@@ -3505,7 +3523,7 @@
        (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
         ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
                                          (uint16_t)reg_addr);
-        if(ret_val) {
+        if (ret_val) {
             e1000_swfw_sync_release(hw, swfw);
             return ret_val;
         }
@@ -3550,12 +3568,12 @@
 
     DEBUGFUNC("e1000_write_phy_reg_ex");
 
-    if(reg_addr > MAX_PHY_REG_ADDRESS) {
+    if (reg_addr > MAX_PHY_REG_ADDRESS) {
         DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
         return -E1000_ERR_PARAM;
     }
 
-    if(hw->mac_type > e1000_82543) {
+    if (hw->mac_type > e1000_82543) {
         /* Set up Op-code, Phy Address, register address, and data intended
          * for the PHY register in the MDI Control register.  The MAC will take
          * care of interfacing with the PHY to send the desired data.
@@ -3568,12 +3586,12 @@
         E1000_WRITE_REG(hw, MDIC, mdic);
 
         /* Poll the ready bit to see if the MDI read completed */
-        for(i = 0; i < 640; i++) {
+        for (i = 0; i < 641; i++) {
             udelay(5);
             mdic = E1000_READ_REG(hw, MDIC);
-            if(mdic & E1000_MDIC_READY) break;
+            if (mdic & E1000_MDIC_READY) break;
         }
-        if(!(mdic & E1000_MDIC_READY)) {
+        if (!(mdic & E1000_MDIC_READY)) {
             DEBUGOUT("MDI Write did not complete\n");
             return -E1000_ERR_PHY;
         }
@@ -3685,7 +3703,7 @@
 
     DEBUGOUT("Resetting Phy...\n");
 
-    if(hw->mac_type > e1000_82543) {
+    if (hw->mac_type > e1000_82543) {
         if ((hw->mac_type == e1000_80003es2lan) &&
             (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
             swfw = E1000_SWFW_PHY1_SM;
@@ -3733,7 +3751,7 @@
     }
     udelay(150);
 
-    if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+    if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
         /* Configure activity LED after PHY reset */
         led_ctrl = E1000_READ_REG(hw, LEDCTL);
         led_ctrl &= IGP_ACTIVITY_LED_MASK;
@@ -3743,14 +3761,13 @@
 
     /* Wait for FW to finish PHY configuration. */
     ret_val = e1000_get_phy_cfg_done(hw);
+    if (ret_val != E1000_SUCCESS)
+        return ret_val;
     e1000_release_software_semaphore(hw);
 
-        if ((hw->mac_type == e1000_ich8lan) &&
-            (hw->phy_type == e1000_phy_igp_3)) {
-            ret_val = e1000_init_lcd_from_nvm(hw);
-            if (ret_val)
-                return ret_val;
-        }
+    if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3))
+        ret_val = e1000_init_lcd_from_nvm(hw);
+
     return ret_val;
 }
 
@@ -3781,25 +3798,25 @@
     case e1000_82572:
     case e1000_ich8lan:
         ret_val = e1000_phy_hw_reset(hw);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         break;
     default:
         ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data |= MII_CR_RESET;
         ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         udelay(1);
         break;
     }
 
-    if(hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
+    if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
         e1000_phy_init_script(hw);
 
     return E1000_SUCCESS;
@@ -3877,8 +3894,8 @@
     if (hw->kmrn_lock_loss_workaround_disabled)
         return E1000_SUCCESS;
 
-    /* Make sure link is up before proceeding. If not just return.
-     * Attempting this while link is negotiating fouls up link
+    /* Make sure link is up before proceeding.  If not just return.
+     * Attempting this while link is negotiating fouled up link
      * stability */
     ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
     ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
@@ -3955,34 +3972,34 @@
     hw->phy_id = (uint32_t) (phy_id_high << 16);
     udelay(20);
     ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     hw->phy_id |= (uint32_t) (phy_id_low & PHY_REVISION_MASK);
     hw->phy_revision = (uint32_t) phy_id_low & ~PHY_REVISION_MASK;
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82543:
-        if(hw->phy_id == M88E1000_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == M88E1000_E_PHY_ID) match = TRUE;
         break;
     case e1000_82544:
-        if(hw->phy_id == M88E1000_I_PHY_ID) match = TRUE;
+        if (hw->phy_id == M88E1000_I_PHY_ID) match = TRUE;
         break;
     case e1000_82540:
     case e1000_82545:
     case e1000_82545_rev_3:
     case e1000_82546:
     case e1000_82546_rev_3:
-        if(hw->phy_id == M88E1011_I_PHY_ID) match = TRUE;
+        if (hw->phy_id == M88E1011_I_PHY_ID) match = TRUE;
         break;
     case e1000_82541:
     case e1000_82541_rev_2:
     case e1000_82547:
     case e1000_82547_rev_2:
-        if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE;
+        if (hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE;
         break;
     case e1000_82573:
-        if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE;
+        if (hw->phy_id == M88E1111_I_PHY_ID) match = TRUE;
         break;
     case e1000_80003es2lan:
         if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
@@ -4021,14 +4038,14 @@
     do {
         if (hw->phy_type != e1000_phy_gg82563) {
             ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
-            if(ret_val) break;
+            if (ret_val) break;
         }
         ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
-        if(ret_val) break;
+        if (ret_val) break;
         ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
-        if(ret_val) break;
+        if (ret_val) break;
         ret_val = E1000_SUCCESS;
-    } while(0);
+    } while (0);
 
     return ret_val;
 }
@@ -4039,7 +4056,7 @@
 * hw - Struct containing variables accessed by shared code
 * phy_info - PHY information structure
 ******************************************************************************/
-static int32_t
+int32_t
 e1000_phy_igp_get_info(struct e1000_hw *hw,
                        struct e1000_phy_info *phy_info)
 {
@@ -4060,23 +4077,23 @@
 
     /* Check polarity status */
     ret_val = e1000_check_polarity(hw, &polarity);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_info->cable_polarity = polarity;
 
     ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_info->mdix_mode = (phy_data & IGP01E1000_PSSR_MDIX) >>
                           IGP01E1000_PSSR_MDIX_SHIFT;
 
-    if((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+    if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
        IGP01E1000_PSSR_SPEED_1000MBPS) {
         /* Local/Remote Receiver Information are only valid at 1000 Mbps */
         ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >>
@@ -4086,19 +4103,19 @@
 
         /* Get cable length */
         ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* Translate to old method */
         average = (max_length + min_length) / 2;
 
-        if(average <= e1000_igp_cable_length_50)
+        if (average <= e1000_igp_cable_length_50)
             phy_info->cable_length = e1000_cable_length_50;
-        else if(average <= e1000_igp_cable_length_80)
+        else if (average <= e1000_igp_cable_length_80)
             phy_info->cable_length = e1000_cable_length_50_80;
-        else if(average <= e1000_igp_cable_length_110)
+        else if (average <= e1000_igp_cable_length_110)
             phy_info->cable_length = e1000_cable_length_80_110;
-        else if(average <= e1000_igp_cable_length_140)
+        else if (average <= e1000_igp_cable_length_140)
             phy_info->cable_length = e1000_cable_length_110_140;
         else
             phy_info->cable_length = e1000_cable_length_140;
@@ -4174,7 +4191,7 @@
     phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
 
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_info->extended_10bt_distance =
@@ -4186,12 +4203,12 @@
 
     /* Check polarity status */
     ret_val = e1000_check_polarity(hw, &polarity);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
     phy_info->cable_polarity = polarity;
 
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX) >>
@@ -4214,7 +4231,7 @@
         }
 
         ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >>
@@ -4251,20 +4268,20 @@
     phy_info->local_rx = e1000_1000t_rx_status_undefined;
     phy_info->remote_rx = e1000_1000t_rx_status_undefined;
 
-    if(hw->media_type != e1000_media_type_copper) {
+    if (hw->media_type != e1000_media_type_copper) {
         DEBUGOUT("PHY info is only valid for copper media\n");
         return -E1000_ERR_CONFIG;
     }
 
     ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
-    if((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+    if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
         DEBUGOUT("PHY info is only valid if link is up\n");
         return -E1000_ERR_CONFIG;
     }
@@ -4284,7 +4301,7 @@
 {
     DEBUGFUNC("e1000_validate_mdi_settings");
 
-    if(!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+    if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
         DEBUGOUT("Invalid MDI setting detected\n");
         hw->mdix = 1;
         return -E1000_ERR_CONFIG;
@@ -4331,7 +4348,7 @@
         eeprom->type = e1000_eeprom_microwire;
         eeprom->opcode_bits = 3;
         eeprom->delay_usec = 50;
-        if(eecd & E1000_EECD_SIZE) {
+        if (eecd & E1000_EECD_SIZE) {
             eeprom->word_size = 256;
             eeprom->address_bits = 8;
         } else {
@@ -4399,7 +4416,7 @@
         }
         eeprom->use_eerd = TRUE;
         eeprom->use_eewr = TRUE;
-        if(e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
+        if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) {
             eeprom->type = e1000_eeprom_flash;
             eeprom->word_size = 2048;
 
@@ -4460,17 +4477,17 @@
         /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
          * 32KB (incremented by powers of 2).
          */
-        if(hw->mac_type <= e1000_82547_rev_2) {
+        if (hw->mac_type <= e1000_82547_rev_2) {
             /* Set to default value for initial eeprom read. */
             eeprom->word_size = 64;
             ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
             eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
             /* 256B eeprom size was not supported in earlier hardware, so we
              * bump eeprom_size up one to ensure that "1" (which maps to 256B)
              * is never the result used in the shifting logic below. */
-            if(eeprom_size)
+            if (eeprom_size)
                 eeprom_size++;
         } else {
             eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >>
@@ -4555,7 +4572,7 @@
          */
         eecd &= ~E1000_EECD_DI;
 
-        if(data & mask)
+        if (data & mask)
             eecd |= E1000_EECD_DI;
 
         E1000_WRITE_REG(hw, EECD, eecd);
@@ -4568,7 +4585,7 @@
 
         mask = mask >> 1;
 
-    } while(mask);
+    } while (mask);
 
     /* We leave the "DI" bit set to "0" when we leave this routine. */
     eecd &= ~E1000_EECD_DI;
@@ -4600,14 +4617,14 @@
     eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
     data = 0;
 
-    for(i = 0; i < count; i++) {
+    for (i = 0; i < count; i++) {
         data = data << 1;
         e1000_raise_ee_clk(hw, &eecd);
 
         eecd = E1000_READ_REG(hw, EECD);
 
         eecd &= ~(E1000_EECD_DI);
-        if(eecd & E1000_EECD_DO)
+        if (eecd & E1000_EECD_DO)
             data |= 1;
 
         e1000_lower_ee_clk(hw, &eecd);
@@ -4638,17 +4655,17 @@
 
     if (hw->mac_type != e1000_82573) {
         /* Request EEPROM Access */
-        if(hw->mac_type > e1000_82544) {
+        if (hw->mac_type > e1000_82544) {
             eecd |= E1000_EECD_REQ;
             E1000_WRITE_REG(hw, EECD, eecd);
             eecd = E1000_READ_REG(hw, EECD);
-            while((!(eecd & E1000_EECD_GNT)) &&
+            while ((!(eecd & E1000_EECD_GNT)) &&
                   (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
                 i++;
                 udelay(5);
                 eecd = E1000_READ_REG(hw, EECD);
             }
-            if(!(eecd & E1000_EECD_GNT)) {
+            if (!(eecd & E1000_EECD_GNT)) {
                 eecd &= ~E1000_EECD_REQ;
                 E1000_WRITE_REG(hw, EECD, eecd);
                 DEBUGOUT("Could not acquire EEPROM grant\n");
@@ -4691,7 +4708,7 @@
 
     eecd = E1000_READ_REG(hw, EECD);
 
-    if(eeprom->type == e1000_eeprom_microwire) {
+    if (eeprom->type == e1000_eeprom_microwire) {
         eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
         E1000_WRITE_REG(hw, EECD, eecd);
         E1000_WRITE_FLUSH(hw);
@@ -4714,7 +4731,7 @@
         E1000_WRITE_REG(hw, EECD, eecd);
         E1000_WRITE_FLUSH(hw);
         udelay(eeprom->delay_usec);
-    } else if(eeprom->type == e1000_eeprom_spi) {
+    } else if (eeprom->type == e1000_eeprom_spi) {
         /* Toggle CS to flush commands */
         eecd |= E1000_EECD_CS;
         E1000_WRITE_REG(hw, EECD, eecd);
@@ -4748,7 +4765,7 @@
         E1000_WRITE_REG(hw, EECD, eecd);
 
         udelay(hw->eeprom.delay_usec);
-    } else if(hw->eeprom.type == e1000_eeprom_microwire) {
+    } else if (hw->eeprom.type == e1000_eeprom_microwire) {
         /* cleanup eeprom */
 
         /* CS on Microwire is active-high */
@@ -4770,7 +4787,7 @@
     }
 
     /* Stop requesting EEPROM access */
-    if(hw->mac_type > e1000_82544) {
+    if (hw->mac_type > e1000_82544) {
         eecd &= ~E1000_EECD_REQ;
         E1000_WRITE_REG(hw, EECD, eecd);
     }
@@ -4808,12 +4825,12 @@
         retry_count += 5;
 
         e1000_standby_eeprom(hw);
-    } while(retry_count < EEPROM_MAX_RETRY_SPI);
+    } while (retry_count < EEPROM_MAX_RETRY_SPI);
 
     /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
      * only 0-5mSec on 5V devices)
      */
-    if(retry_count >= EEPROM_MAX_RETRY_SPI) {
+    if (retry_count >= EEPROM_MAX_RETRY_SPI) {
         DEBUGOUT("SPI EEPROM Status error\n");
         return -E1000_ERR_EEPROM;
     }
@@ -4844,7 +4861,7 @@
     /* A check for invalid values:  offset too large, too many words, and not
      * enough words.
      */
-    if((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
+    if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
        (words == 0)) {
         DEBUGOUT("\"words\" parameter out of bounds\n");
         return -E1000_ERR_EEPROM;
@@ -4852,7 +4869,7 @@
 
     /* FLASH reads without acquiring the semaphore are safe */
     if (e1000_is_onboard_nvm_eeprom(hw) == TRUE &&
-    hw->eeprom.use_eerd == FALSE) {
+        hw->eeprom.use_eerd == FALSE) {
         switch (hw->mac_type) {
         case e1000_80003es2lan:
             break;
@@ -4879,7 +4896,7 @@
         uint16_t word_in;
         uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
 
-        if(e1000_spi_eeprom_ready(hw)) {
+        if (e1000_spi_eeprom_ready(hw)) {
             e1000_release_eeprom(hw);
             return -E1000_ERR_EEPROM;
         }
@@ -4887,7 +4904,7 @@
         e1000_standby_eeprom(hw);
 
         /* Some SPI eeproms use the 8th address bit embedded in the opcode */
-        if((eeprom->address_bits == 8) && (offset >= 128))
+        if ((eeprom->address_bits == 8) && (offset >= 128))
             read_opcode |= EEPROM_A8_OPCODE_SPI;
 
         /* Send the READ command (opcode + addr)  */
@@ -4903,7 +4920,7 @@
             word_in = e1000_shift_in_ee_bits(hw, 16);
             data[i] = (word_in >> 8) | (word_in << 8);
         }
-    } else if(eeprom->type == e1000_eeprom_microwire) {
+    } else if (eeprom->type == e1000_eeprom_microwire) {
         for (i = 0; i < words; i++) {
             /* Send the READ command (opcode + addr)  */
             e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
@@ -4948,7 +4965,7 @@
         E1000_WRITE_REG(hw, EERD, eerd);
         error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
 
-        if(error) {
+        if (error) {
             break;
         }
         data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA);
@@ -4985,7 +5002,7 @@
                          E1000_EEPROM_RW_REG_START;
 
         error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
-        if(error) {
+        if (error) {
             break;
         }
 
@@ -4993,7 +5010,7 @@
 
         error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
 
-        if(error) {
+        if (error) {
             break;
         }
     }
@@ -5014,13 +5031,13 @@
     uint32_t i, reg = 0;
     int32_t done = E1000_ERR_EEPROM;
 
-    for(i = 0; i < attempts; i++) {
-        if(eerd == E1000_EEPROM_POLL_READ)
+    for (i = 0; i < attempts; i++) {
+        if (eerd == E1000_EEPROM_POLL_READ)
             reg = E1000_READ_REG(hw, EERD);
         else
             reg = E1000_READ_REG(hw, EEWR);
 
-        if(reg & E1000_EEPROM_RW_REG_DONE) {
+        if (reg & E1000_EEPROM_RW_REG_DONE) {
             done = E1000_SUCCESS;
             break;
         }
@@ -5052,7 +5069,7 @@
         eecd = ((eecd >> 15) & 0x03);
 
         /* If both bits are set, device is Flash type */
-        if(eecd == 0x03) {
+        if (eecd == 0x03) {
             return FALSE;
         }
     }
@@ -5117,7 +5134,7 @@
         checksum += eeprom_data;
     }
 
-    if(checksum == (uint16_t) EEPROM_SUM)
+    if (checksum == (uint16_t) EEPROM_SUM)
         return E1000_SUCCESS;
     else {
         DEBUGOUT("EEPROM Checksum Invalid\n");
@@ -5142,15 +5159,15 @@
 
     DEBUGFUNC("e1000_update_eeprom_checksum");
 
-    for(i = 0; i < EEPROM_CHECKSUM_REG; i++) {
-        if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+    for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+        if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
             DEBUGOUT("EEPROM Read Error\n");
             return -E1000_ERR_EEPROM;
         }
         checksum += eeprom_data;
     }
     checksum = (uint16_t) EEPROM_SUM - checksum;
-    if(e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+    if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
         DEBUGOUT("EEPROM Write Error\n");
         return -E1000_ERR_EEPROM;
     } else if (hw->eeprom.type == e1000_eeprom_flash) {
@@ -5192,14 +5209,14 @@
     /* A check for invalid values:  offset too large, too many words, and not
      * enough words.
      */
-    if((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
+    if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
        (words == 0)) {
         DEBUGOUT("\"words\" parameter out of bounds\n");
         return -E1000_ERR_EEPROM;
     }
 
     /* 82573 writes only through eewr */
-    if(eeprom->use_eewr == TRUE)
+    if (eeprom->use_eewr == TRUE)
         return e1000_write_eeprom_eewr(hw, offset, words, data);
 
     if (eeprom->type == e1000_eeprom_ich8)
@@ -5209,7 +5226,7 @@
     if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
         return -E1000_ERR_EEPROM;
 
-    if(eeprom->type == e1000_eeprom_microwire) {
+    if (eeprom->type == e1000_eeprom_microwire) {
         status = e1000_write_eeprom_microwire(hw, offset, words, data);
     } else {
         status = e1000_write_eeprom_spi(hw, offset, words, data);
@@ -5245,7 +5262,7 @@
     while (widx < words) {
         uint8_t write_opcode = EEPROM_WRITE_OPCODE_SPI;
 
-        if(e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
+        if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
 
         e1000_standby_eeprom(hw);
 
@@ -5256,7 +5273,7 @@
         e1000_standby_eeprom(hw);
 
         /* Some SPI eeproms use the 8th address bit embedded in the opcode */
-        if((eeprom->address_bits == 8) && (offset >= 128))
+        if ((eeprom->address_bits == 8) && (offset >= 128))
             write_opcode |= EEPROM_A8_OPCODE_SPI;
 
         /* Send the Write command (8-bit opcode + addr) */
@@ -5278,7 +5295,7 @@
              * operation, while the smaller eeproms are capable of an 8-byte
              * PAGE WRITE operation.  Break the inner loop to pass new address
              */
-            if((((offset + widx)*2) % eeprom->page_size) == 0) {
+            if ((((offset + widx)*2) % eeprom->page_size) == 0) {
                 e1000_standby_eeprom(hw);
                 break;
             }
@@ -5344,12 +5361,12 @@
          * signal that the command has been completed by raising the DO signal.
          * If DO does not go high in 10 milliseconds, then error out.
          */
-        for(i = 0; i < 200; i++) {
+        for (i = 0; i < 200; i++) {
             eecd = E1000_READ_REG(hw, EECD);
-            if(eecd & E1000_EECD_DO) break;
+            if (eecd & E1000_EECD_DO) break;
             udelay(50);
         }
-        if(i == 200) {
+        if (i == 200) {
             DEBUGOUT("EEPROM Write did not complete\n");
             return -E1000_ERR_EEPROM;
         }
@@ -5540,40 +5557,6 @@
 }
 
 /******************************************************************************
- * Reads the adapter's part number from the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- * part_num - Adapter's part number
- *****************************************************************************/
-int32_t
-e1000_read_part_num(struct e1000_hw *hw,
-                    uint32_t *part_num)
-{
-    uint16_t offset = EEPROM_PBA_BYTE_1;
-    uint16_t eeprom_data;
-
-    DEBUGFUNC("e1000_read_part_num");
-
-    /* Get word 0 from EEPROM */
-    if(e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
-        DEBUGOUT("EEPROM Read Error\n");
-        return -E1000_ERR_EEPROM;
-    }
-    /* Save word 0 in upper half of part_num */
-    *part_num = (uint32_t) (eeprom_data << 16);
-
-    /* Get word 1 from EEPROM */
-    if(e1000_read_eeprom(hw, ++offset, 1, &eeprom_data) < 0) {
-        DEBUGOUT("EEPROM Read Error\n");
-        return -E1000_ERR_EEPROM;
-    }
-    /* Save word 1 in lower half of part_num */
-    *part_num |= eeprom_data;
-
-    return E1000_SUCCESS;
-}
-
-/******************************************************************************
  * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
  * second function of dual function devices
  *
@@ -5587,9 +5570,9 @@
 
     DEBUGFUNC("e1000_read_mac_addr");
 
-    for(i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+    for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
         offset = i >> 1;
-        if(e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+        if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
             DEBUGOUT("EEPROM Read Error\n");
             return -E1000_ERR_EEPROM;
         }
@@ -5604,12 +5587,12 @@
     case e1000_82546_rev_3:
     case e1000_82571:
     case e1000_80003es2lan:
-        if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
+        if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
             hw->perm_mac_addr[5] ^= 0x01;
         break;
     }
 
-    for(i = 0; i < NODE_ADDRESS_SIZE; i++)
+    for (i = 0; i < NODE_ADDRESS_SIZE; i++)
         hw->mac_addr[i] = hw->perm_mac_addr[i];
     return E1000_SUCCESS;
 }
@@ -5648,7 +5631,7 @@
 
     /* Zero out the other 15 receive addresses. */
     DEBUGOUT("Clearing RAR[1-15]\n");
-    for(i = 1; i < rar_num; i++) {
+    for (i = 1; i < rar_num; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
         E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
@@ -5699,7 +5682,7 @@
     if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
         num_rar_entry -= 1;
 
-    for(i = rar_used_count; i < num_rar_entry; i++) {
+    for (i = rar_used_count; i < num_rar_entry; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
         E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
@@ -5711,13 +5694,13 @@
     num_mta_entry = E1000_NUM_MTA_REGISTERS;
     if (hw->mac_type == e1000_ich8lan)
         num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN;
-    for(i = 0; i < num_mta_entry; i++) {
+    for (i = 0; i < num_mta_entry; i++) {
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
         E1000_WRITE_FLUSH(hw);
     }
 
     /* Add the new addresses */
-    for(i = 0; i < mc_addr_count; i++) {
+    for (i = 0; i < mc_addr_count; i++) {
         DEBUGOUT(" Adding the multicast addresses:\n");
         DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i,
                   mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad)],
@@ -5849,7 +5832,7 @@
      * in the MTA, save off the previous entry before writing and
      * restore the old value after writing.
      */
-    if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
+    if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
         E1000_WRITE_FLUSH(hw);
@@ -5999,7 +5982,7 @@
 
     DEBUGFUNC("e1000_id_led_init");
 
-    if(hw->mac_type < e1000_82540) {
+    if (hw->mac_type < e1000_82540) {
         /* Nothing to do */
         return E1000_SUCCESS;
     }
@@ -6009,7 +5992,7 @@
     hw->ledctl_mode1 = hw->ledctl_default;
     hw->ledctl_mode2 = hw->ledctl_default;
 
-    if(e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+    if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
         DEBUGOUT("EEPROM Read Error\n");
         return -E1000_ERR_EEPROM;
     }
@@ -6026,7 +6009,7 @@
     }
     for (i = 0; i < 4; i++) {
         temp = (eeprom_data >> (i << 2)) & led_mask;
-        switch(temp) {
+        switch (temp) {
         case ID_LED_ON1_DEF2:
         case ID_LED_ON1_ON2:
         case ID_LED_ON1_OFF2:
@@ -6043,7 +6026,7 @@
             /* Do nothing */
             break;
         }
-        switch(temp) {
+        switch (temp) {
         case ID_LED_DEF1_ON2:
         case ID_LED_ON1_ON2:
         case ID_LED_OFF1_ON2:
@@ -6077,7 +6060,7 @@
 
     DEBUGFUNC("e1000_setup_led");
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82542_rev2_0:
     case e1000_82542_rev2_1:
     case e1000_82543:
@@ -6091,16 +6074,16 @@
         /* Turn off PHY Smart Power Down (if enabled) */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
                                      &hw->phy_spd_default);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
                                       (uint16_t)(hw->phy_spd_default &
                                       ~IGP01E1000_GMII_SPD));
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         /* Fall Through */
     default:
-        if(hw->media_type == e1000_media_type_fiber) {
+        if (hw->media_type == e1000_media_type_fiber) {
             ledctl = E1000_READ_REG(hw, LEDCTL);
             /* Save current LEDCTL settings */
             hw->ledctl_default = ledctl;
@@ -6111,7 +6094,7 @@
             ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
                        E1000_LEDCTL_LED0_MODE_SHIFT);
             E1000_WRITE_REG(hw, LEDCTL, ledctl);
-        } else if(hw->media_type == e1000_media_type_copper)
+        } else if (hw->media_type == e1000_media_type_copper)
             E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
         break;
     }
@@ -6119,6 +6102,7 @@
     return E1000_SUCCESS;
 }
 
+
 /******************************************************************************
  * Used on 82571 and later Si that has LED blink bits.
  * Callers must use their own timer and should have already called
@@ -6169,7 +6153,7 @@
 
     DEBUGFUNC("e1000_cleanup_led");
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82542_rev2_0:
     case e1000_82542_rev2_1:
     case e1000_82543:
@@ -6183,7 +6167,7 @@
         /* Turn on PHY Smart Power Down (if previously enabled) */
         ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
                                       hw->phy_spd_default);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         /* Fall Through */
     default:
@@ -6211,7 +6195,7 @@
 
     DEBUGFUNC("e1000_led_on");
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82542_rev2_0:
     case e1000_82542_rev2_1:
     case e1000_82543:
@@ -6220,7 +6204,7 @@
         ctrl |= E1000_CTRL_SWDPIO0;
         break;
     case e1000_82544:
-        if(hw->media_type == e1000_media_type_fiber) {
+        if (hw->media_type == e1000_media_type_fiber) {
             /* Set SW Defineable Pin 0 to turn on the LED */
             ctrl |= E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
@@ -6231,7 +6215,7 @@
         }
         break;
     default:
-        if(hw->media_type == e1000_media_type_fiber) {
+        if (hw->media_type == e1000_media_type_fiber) {
             /* Clear SW Defineable Pin 0 to turn on the LED */
             ctrl &= ~E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
@@ -6262,7 +6246,7 @@
 
     DEBUGFUNC("e1000_led_off");
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82542_rev2_0:
     case e1000_82542_rev2_1:
     case e1000_82543:
@@ -6271,7 +6255,7 @@
         ctrl |= E1000_CTRL_SWDPIO0;
         break;
     case e1000_82544:
-        if(hw->media_type == e1000_media_type_fiber) {
+        if (hw->media_type == e1000_media_type_fiber) {
             /* Clear SW Defineable Pin 0 to turn off the LED */
             ctrl &= ~E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
@@ -6282,7 +6266,7 @@
         }
         break;
     default:
-        if(hw->media_type == e1000_media_type_fiber) {
+        if (hw->media_type == e1000_media_type_fiber) {
             /* Set SW Defineable Pin 0 to turn off the LED */
             ctrl |= E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
@@ -6306,7 +6290,7 @@
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static void
+void
 e1000_clear_hw_cntrs(struct e1000_hw *hw)
 {
     volatile uint32_t temp;
@@ -6369,7 +6353,7 @@
     temp = E1000_READ_REG(hw, MPTC);
     temp = E1000_READ_REG(hw, BPTC);
 
-    if(hw->mac_type < e1000_82543) return;
+    if (hw->mac_type < e1000_82543) return;
 
     temp = E1000_READ_REG(hw, ALGNERRC);
     temp = E1000_READ_REG(hw, RXERRC);
@@ -6378,13 +6362,13 @@
     temp = E1000_READ_REG(hw, TSCTC);
     temp = E1000_READ_REG(hw, TSCTFC);
 
-    if(hw->mac_type <= e1000_82544) return;
+    if (hw->mac_type <= e1000_82544) return;
 
     temp = E1000_READ_REG(hw, MGTPRC);
     temp = E1000_READ_REG(hw, MGTPDC);
     temp = E1000_READ_REG(hw, MGTPTC);
 
-    if(hw->mac_type <= e1000_82547_rev_2) return;
+    if (hw->mac_type <= e1000_82547_rev_2) return;
 
     temp = E1000_READ_REG(hw, IAC);
     temp = E1000_READ_REG(hw, ICRXOC);
@@ -6415,8 +6399,8 @@
 {
     DEBUGFUNC("e1000_reset_adaptive");
 
-    if(hw->adaptive_ifs) {
-        if(!hw->ifs_params_forced) {
+    if (hw->adaptive_ifs) {
+        if (!hw->ifs_params_forced) {
             hw->current_ifs_val = 0;
             hw->ifs_min_val = IFS_MIN;
             hw->ifs_max_val = IFS_MAX;
@@ -6443,12 +6427,12 @@
 {
     DEBUGFUNC("e1000_update_adaptive");
 
-    if(hw->adaptive_ifs) {
-        if((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
-            if(hw->tx_packet_delta > MIN_NUM_XMITS) {
+    if (hw->adaptive_ifs) {
+        if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
+            if (hw->tx_packet_delta > MIN_NUM_XMITS) {
                 hw->in_ifs_mode = TRUE;
-                if(hw->current_ifs_val < hw->ifs_max_val) {
-                    if(hw->current_ifs_val == 0)
+                if (hw->current_ifs_val < hw->ifs_max_val) {
+                    if (hw->current_ifs_val == 0)
                         hw->current_ifs_val = hw->ifs_min_val;
                     else
                         hw->current_ifs_val += hw->ifs_step_size;
@@ -6456,7 +6440,7 @@
                 }
             }
         } else {
-            if(hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+            if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
                 hw->current_ifs_val = 0;
                 hw->in_ifs_mode = FALSE;
                 E1000_WRITE_REG(hw, AIT, 0);
@@ -6503,46 +6487,46 @@
      * This could be simplified if all environments supported
      * 64-bit integers.
      */
-    if(carry_bit && ((stats->gorcl & 0x80000000) == 0))
+    if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
         stats->gorch++;
     /* Is this a broadcast or multicast?  Check broadcast first,
      * since the test for a multicast frame will test positive on
      * a broadcast frame.
      */
-    if((mac_addr[0] == (uint8_t) 0xff) && (mac_addr[1] == (uint8_t) 0xff))
+    if ((mac_addr[0] == (uint8_t) 0xff) && (mac_addr[1] == (uint8_t) 0xff))
         /* Broadcast packet */
         stats->bprc++;
-    else if(*mac_addr & 0x01)
+    else if (*mac_addr & 0x01)
         /* Multicast packet */
         stats->mprc++;
 
-    if(frame_len == hw->max_frame_size) {
+    if (frame_len == hw->max_frame_size) {
         /* In this case, the hardware has overcounted the number of
          * oversize frames.
          */
-        if(stats->roc > 0)
+        if (stats->roc > 0)
             stats->roc--;
     }
 
     /* Adjust the bin counters when the extra byte put the frame in the
      * wrong bin. Remember that the frame_len was adjusted above.
      */
-    if(frame_len == 64) {
+    if (frame_len == 64) {
         stats->prc64++;
         stats->prc127--;
-    } else if(frame_len == 127) {
+    } else if (frame_len == 127) {
         stats->prc127++;
         stats->prc255--;
-    } else if(frame_len == 255) {
+    } else if (frame_len == 255) {
         stats->prc255++;
         stats->prc511--;
-    } else if(frame_len == 511) {
+    } else if (frame_len == 511) {
         stats->prc511++;
         stats->prc1023--;
-    } else if(frame_len == 1023) {
+    } else if (frame_len == 1023) {
         stats->prc1023++;
         stats->prc1522--;
-    } else if(frame_len == 1522) {
+    } else if (frame_len == 1522) {
         stats->prc1522++;
     }
 }
@@ -6582,10 +6566,10 @@
         hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
                        e1000_bus_type_pcix : e1000_bus_type_pci;
 
-        if(hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+        if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
             hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
                             e1000_bus_speed_66 : e1000_bus_speed_120;
-        } else if(hw->bus_type == e1000_bus_type_pci) {
+        } else if (hw->bus_type == e1000_bus_type_pci) {
             hw->bus_speed = (status & E1000_STATUS_PCI66) ?
                             e1000_bus_speed_66 : e1000_bus_speed_33;
         } else {
@@ -6680,11 +6664,11 @@
     *min_length = *max_length = 0;
 
     /* Use old method for Phy older than IGP */
-    if(hw->phy_type == e1000_phy_m88) {
+    if (hw->phy_type == e1000_phy_m88) {
 
         ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
                                      &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
                        M88E1000_PSSR_CABLE_LENGTH_SHIFT;
@@ -6743,7 +6727,7 @@
             return -E1000_ERR_PHY;
             break;
         }
-    } else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+    } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
         uint16_t cur_agc_value;
         uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
         uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
@@ -6752,10 +6736,10 @@
                                                           IGP01E1000_PHY_AGC_C,
                                                           IGP01E1000_PHY_AGC_D};
         /* Read the AGC registers for all channels */
-        for(i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+        for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
 
             ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
@@ -6805,7 +6789,7 @@
             if (ret_val)
                 return ret_val;
 
-	    /* Getting bits 15:9, which represent the combination of course and
+            /* Getting bits 15:9, which represent the combination of course and
              * fine gain values.  The result is a number that can be put into
              * the lookup table to obtain the approximate cable length. */
             cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
@@ -6870,7 +6854,7 @@
         /* return the Polarity bit in the Status register. */
         ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
                                      &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
         *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >>
                     M88E1000_PSSR_REV_POLARITY_SHIFT;
@@ -6880,18 +6864,18 @@
         /* Read the Status register to check the speed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
                                      &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
          * find the polarity status */
-        if((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+        if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
            IGP01E1000_PSSR_SPEED_1000MBPS) {
 
             /* Read the GIG initialization PCS register (0x00B4) */
             ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
                                          &phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             /* Check the polarity bits */
@@ -6940,7 +6924,7 @@
         hw->phy_type == e1000_phy_igp_2) {
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
                                      &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
@@ -6948,7 +6932,7 @@
                (hw->phy_type == e1000_phy_gg82563)) {
         ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
                                      &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
@@ -6988,42 +6972,42 @@
 
     DEBUGFUNC("e1000_config_dsp_after_link_change");
 
-    if(hw->phy_type != e1000_phy_igp)
+    if (hw->phy_type != e1000_phy_igp)
         return E1000_SUCCESS;
 
-    if(link_up) {
+    if (link_up) {
         ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
-        if(ret_val) {
+        if (ret_val) {
             DEBUGOUT("Error getting link speed and duplex\n");
             return ret_val;
         }
 
-        if(speed == SPEED_1000) {
+        if (speed == SPEED_1000) {
 
             ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
             if (ret_val)
                 return ret_val;
 
-            if((hw->dsp_config_state == e1000_dsp_config_enabled) &&
+            if ((hw->dsp_config_state == e1000_dsp_config_enabled) &&
                 min_length >= e1000_igp_cable_length_50) {
 
-                for(i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+                for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
                     ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i],
                                                  &phy_data);
-                    if(ret_val)
+                    if (ret_val)
                         return ret_val;
 
                     phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
 
                     ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i],
                                                   phy_data);
-                    if(ret_val)
+                    if (ret_val)
                         return ret_val;
                 }
                 hw->dsp_config_state = e1000_dsp_config_activated;
             }
 
-            if((hw->ffe_config_state == e1000_ffe_config_enabled) &&
+            if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
                (min_length < e1000_igp_cable_length_50)) {
 
                 uint16_t ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
@@ -7032,70 +7016,70 @@
                 /* clear previous idle error counts */
                 ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
                                              &phy_data);
-                if(ret_val)
+                if (ret_val)
                     return ret_val;
 
-                for(i = 0; i < ffe_idle_err_timeout; i++) {
+                for (i = 0; i < ffe_idle_err_timeout; i++) {
                     udelay(1000);
                     ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
                                                  &phy_data);
-                    if(ret_val)
+                    if (ret_val)
                         return ret_val;
 
                     idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT);
-                    if(idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) {
+                    if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) {
                         hw->ffe_config_state = e1000_ffe_config_active;
 
                         ret_val = e1000_write_phy_reg(hw,
                                     IGP01E1000_PHY_DSP_FFE,
                                     IGP01E1000_PHY_DSP_FFE_CM_CP);
-                        if(ret_val)
+                        if (ret_val)
                             return ret_val;
                         break;
                     }
 
-                    if(idle_errs)
+                    if (idle_errs)
                         ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100;
                 }
             }
         }
     } else {
-        if(hw->dsp_config_state == e1000_dsp_config_activated) {
+        if (hw->dsp_config_state == e1000_dsp_config_activated) {
             /* Save off the current value of register 0x2F5B to be restored at
              * the end of the routines. */
             ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
 
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             /* Disable the PHY transmitter */
             ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
 
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             msec_delay_irq(20);
 
             ret_val = e1000_write_phy_reg(hw, 0x0000,
                                           IGP01E1000_IEEE_FORCE_GIGA);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
-            for(i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+            for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
                 ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data);
-                if(ret_val)
+                if (ret_val)
                     return ret_val;
 
                 phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
                 phy_data |=  IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
 
                 ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data);
-                if(ret_val)
+                if (ret_val)
                     return ret_val;
             }
 
             ret_val = e1000_write_phy_reg(hw, 0x0000,
                                           IGP01E1000_IEEE_RESTART_AUTONEG);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             msec_delay_irq(20);
@@ -7103,40 +7087,40 @@
             /* Now enable the transmitter */
             ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
 
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             hw->dsp_config_state = e1000_dsp_config_enabled;
         }
 
-        if(hw->ffe_config_state == e1000_ffe_config_active) {
+        if (hw->ffe_config_state == e1000_ffe_config_active) {
             /* Save off the current value of register 0x2F5B to be restored at
              * the end of the routines. */
             ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
 
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             /* Disable the PHY transmitter */
             ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
 
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             msec_delay_irq(20);
 
             ret_val = e1000_write_phy_reg(hw, 0x0000,
                                           IGP01E1000_IEEE_FORCE_GIGA);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
                                           IGP01E1000_PHY_DSP_FFE_DEFAULT);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             ret_val = e1000_write_phy_reg(hw, 0x0000,
                                           IGP01E1000_IEEE_RESTART_AUTONEG);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             msec_delay_irq(20);
@@ -7144,7 +7128,7 @@
             /* Now enable the transmitter */
             ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
 
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             hw->ffe_config_state = e1000_ffe_config_enabled;
@@ -7169,20 +7153,20 @@
 
     DEBUGFUNC("e1000_set_phy_mode");
 
-    if((hw->mac_type == e1000_82545_rev_3) &&
-       (hw->media_type == e1000_media_type_copper)) {
+    if ((hw->mac_type == e1000_82545_rev_3) &&
+        (hw->media_type == e1000_media_type_copper)) {
         ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data);
-        if(ret_val) {
+        if (ret_val) {
             return ret_val;
         }
 
-        if((eeprom_data != EEPROM_RESERVED_WORD) &&
-           (eeprom_data & EEPROM_PHY_CLASS_A)) {
+        if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+            (eeprom_data & EEPROM_PHY_CLASS_A)) {
             ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
             ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             hw->phy_reset_disable = FALSE;
@@ -7233,16 +7217,16 @@
         phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
     } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
-    if(!active) {
-        if(hw->mac_type == e1000_82541_rev_2 ||
-           hw->mac_type == e1000_82547_rev_2) {
+    if (!active) {
+        if (hw->mac_type == e1000_82541_rev_2 ||
+            hw->mac_type == e1000_82547_rev_2) {
             phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         } else {
             if (hw->mac_type == e1000_ich8lan) {
@@ -7264,13 +7248,13 @@
         if (hw->smart_speed == e1000_smart_speed_on) {
             ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
                                          &phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         } else if (hw->smart_speed == e1000_smart_speed_off) {
             ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
@@ -7281,19 +7265,19 @@
             phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         }
 
-    } else if((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
-              (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
-              (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
+    } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
+               (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
+               (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
 
-        if(hw->mac_type == e1000_82541_rev_2 ||
+        if (hw->mac_type == e1000_82541_rev_2 ||
             hw->mac_type == e1000_82547_rev_2) {
             phy_data |= IGP01E1000_GMII_FLEX_SPD;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         } else {
             if (hw->mac_type == e1000_ich8lan) {
@@ -7310,12 +7294,12 @@
 
         /* When LPLU is enabled we should disable SmartSpeed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
         ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
     }
@@ -7345,14 +7329,14 @@
     uint16_t phy_data;
     DEBUGFUNC("e1000_set_d0_lplu_state");
 
-    if(hw->mac_type <= e1000_82547_rev_2)
+    if (hw->mac_type <= e1000_82547_rev_2)
         return E1000_SUCCESS;
 
     if (hw->mac_type == e1000_ich8lan) {
         phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
     } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
     }
 
@@ -7374,13 +7358,13 @@
         if (hw->smart_speed == e1000_smart_speed_on) {
             ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
                                          &phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
 
             phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         } else if (hw->smart_speed == e1000_smart_speed_off) {
             ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
@@ -7391,7 +7375,7 @@
             phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
                                           phy_data);
-            if(ret_val)
+            if (ret_val)
                 return ret_val;
         }
 
@@ -7410,12 +7394,12 @@
 
         /* When LPLU is enabled we should disable SmartSpeed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
         ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
     }
@@ -7436,7 +7420,7 @@
 
     DEBUGFUNC("e1000_set_vco_speed");
 
-    switch(hw->mac_type) {
+    switch (hw->mac_type) {
     case e1000_82545_rev_3:
     case e1000_82546_rev_3:
        break;
@@ -7447,39 +7431,39 @@
     /* Set PHY register 30, page 5, bit 8 to 0 */
 
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* Set PHY register 30, page 4, bit 11 to 1 */
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     phy_data |= M88E1000_PHY_VCO_REG_BIT11;
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     return E1000_SUCCESS;
@@ -7558,7 +7542,7 @@
 {
     uint8_t *tmp;
     uint8_t *bufptr = buffer;
-    uint32_t data;
+    uint32_t data = 0;
     uint16_t remaining, i, j, prev_bytes;
 
     /* sum = only sum of the data and it is not checksum */
@@ -7638,7 +7622,7 @@
 
     buffer = (uint8_t *) hdr;
     i = length;
-    while(i--)
+    while (i--)
         sum += buffer[i];
 
     hdr->checksum = 0 - sum;
@@ -7661,8 +7645,7 @@
  * returns  - E1000_SUCCESS for success.
  ****************************************************************************/
 static int32_t
-e1000_mng_write_commit(
-    struct e1000_hw * hw)
+e1000_mng_write_commit(struct e1000_hw * hw)
 {
     uint32_t hicr;
 
@@ -7834,31 +7817,31 @@
     /* Disable the transmitter on the PHY */
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* This loop will early-out if the NO link condition has been met. */
-    for(i = PHY_FORCE_TIME; i > 0; i--) {
+    for (i = PHY_FORCE_TIME; i > 0; i--) {
         /* Read the MII Status Register and wait for Link Status bit
          * to be clear.
          */
 
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break;
+        if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break;
         msec_delay_irq(100);
     }
 
@@ -7868,40 +7851,40 @@
     /* Now we will re-enable th transmitter on the PHY */
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
     msec_delay_irq(50);
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
     msec_delay_irq(50);
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
     msec_delay_irq(50);
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     /* This loop will early-out if the link condition has been met. */
-    for(i = PHY_FORCE_TIME; i > 0; i--) {
+    for (i = PHY_FORCE_TIME; i > 0; i--) {
         /* Read the MII Status Register and wait for Link Status bit
          * to be set.
          */
 
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
         ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
 
-        if(mii_status_reg & MII_SR_LINK_STATUS) break;
+        if (mii_status_reg & MII_SR_LINK_STATUS) break;
         msec_delay_irq(100);
     }
     return E1000_SUCCESS;
@@ -7980,15 +7963,15 @@
 
     e1000_set_pci_express_master_disable(hw);
 
-    while(timeout) {
-        if(!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
+    while (timeout) {
+        if (!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
             break;
         else
             udelay(100);
         timeout--;
     }
 
-    if(!timeout) {
+    if (!timeout) {
         DEBUGOUT("Master requests are pending.\n");
         return -E1000_ERR_MASTER_REQUESTS_PENDING;
     }
@@ -8029,7 +8012,7 @@
             timeout--;
         }
 
-        if(!timeout) {
+        if (!timeout) {
             DEBUGOUT("Auto read by HW from EEPROM has not completed.\n");
             return -E1000_ERR_RESET;
         }
@@ -8110,7 +8093,7 @@
 
     DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
 
-    if(!hw->eeprom_semaphore_present)
+    if (!hw->eeprom_semaphore_present)
         return E1000_SUCCESS;
 
     if (hw->mac_type == e1000_80003es2lan) {
@@ -8121,20 +8104,20 @@
 
     /* Get the FW semaphore. */
     timeout = hw->eeprom.word_size + 1;
-    while(timeout) {
+    while (timeout) {
         swsm = E1000_READ_REG(hw, SWSM);
         swsm |= E1000_SWSM_SWESMBI;
         E1000_WRITE_REG(hw, SWSM, swsm);
         /* if we managed to set the bit we got the semaphore. */
         swsm = E1000_READ_REG(hw, SWSM);
-        if(swsm & E1000_SWSM_SWESMBI)
+        if (swsm & E1000_SWSM_SWESMBI)
             break;
 
         udelay(50);
         timeout--;
     }
 
-    if(!timeout) {
+    if (!timeout) {
         /* Release semaphores */
         e1000_put_hw_eeprom_semaphore(hw);
         DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n");
@@ -8159,7 +8142,7 @@
 
     DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
 
-    if(!hw->eeprom_semaphore_present)
+    if (!hw->eeprom_semaphore_present)
         return;
 
     swsm = E1000_READ_REG(hw, SWSM);
@@ -8192,16 +8175,16 @@
     if (hw->mac_type != e1000_80003es2lan)
         return E1000_SUCCESS;
 
-    while(timeout) {
+    while (timeout) {
         swsm = E1000_READ_REG(hw, SWSM);
         /* If SMBI bit cleared, it is now set and we hold the semaphore */
-        if(!(swsm & E1000_SWSM_SMBI))
+        if (!(swsm & E1000_SWSM_SMBI))
             break;
         msec_delay_irq(1);
         timeout--;
     }
 
-    if(!timeout) {
+    if (!timeout) {
         DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
         return -E1000_ERR_RESET;
     }
@@ -8277,7 +8260,7 @@
     case e1000_82573:
     case e1000_80003es2lan:
         fwsm = E1000_READ_REG(hw, FWSM);
-        if((fwsm & E1000_FWSM_MODE_MASK) != 0)
+        if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
             return TRUE;
         break;
     case e1000_ich8lan:
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 375b955..a170e96 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -336,9 +336,9 @@
 #define E1000_HI_MAX_MNG_DATA_LENGTH    0x6F8   /* Host Interface data length */
 
 #define E1000_MNG_DHCP_COMMAND_TIMEOUT  10      /* Time in ms to process MNG command */
-#define E1000_MNG_DHCP_COOKIE_OFFSET	0x6F0   /* Cookie offset */
-#define E1000_MNG_DHCP_COOKIE_LENGTH	0x10    /* Cookie length */
-#define E1000_MNG_IAMT_MODE		0x3
+#define E1000_MNG_DHCP_COOKIE_OFFSET    0x6F0   /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH    0x10    /* Cookie length */
+#define E1000_MNG_IAMT_MODE             0x3
 #define E1000_MNG_ICH_IAMT_MODE         0x2
 #define E1000_IAMT_SIGNATURE            0x544D4149 /* Intel(R) Active Management Technology signature */
 
@@ -385,7 +385,7 @@
 #endif
 
 int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
-							uint16_t length);
+                                  uint16_t length);
 boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
 boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
 
@@ -470,6 +470,7 @@
 #define E1000_DEV_ID_82571EB_COPPER      0x105E
 #define E1000_DEV_ID_82571EB_FIBER       0x105F
 #define E1000_DEV_ID_82571EB_SERDES      0x1060
+#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
 #define E1000_DEV_ID_82572EI_COPPER      0x107D
 #define E1000_DEV_ID_82572EI_FIBER       0x107E
 #define E1000_DEV_ID_82572EI_SERDES      0x107F
@@ -523,7 +524,7 @@
 
 
 /* 802.1q VLAN Packet Sizes */
-#define VLAN_TAG_SIZE                     4     /* 802.3ac tag (not DMAed) */
+#define VLAN_TAG_SIZE  4     /* 802.3ac tag (not DMAed) */
 
 /* Ethertype field values */
 #define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
@@ -697,6 +698,7 @@
     E1000_RXDEXT_STATERR_CXE |            \
     E1000_RXDEXT_STATERR_RXE)
 
+
 /* Transmit Descriptor */
 struct e1000_tx_desc {
     uint64_t buffer_addr;       /* Address of the descriptor's data buffer */
@@ -2086,7 +2088,7 @@
 #define E1000_MANC_EN_IP_ADDR_FILTER    0x00400000 /* Enable IP address
                                                     * filtering */
 #define E1000_MANC_EN_XSUM_FILTER   0x00800000 /* Enable checksum filtering */
-#define E1000_MANC_BR_EN            0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_BR_EN         0x01000000 /* Enable broadcast filtering */
 #define E1000_MANC_SMB_REQ       0x01000000 /* SMBus Request */
 #define E1000_MANC_SMB_GNT       0x02000000 /* SMBus Grant */
 #define E1000_MANC_SMB_CLK_IN    0x04000000 /* SMBus Clock In */
@@ -2172,7 +2174,7 @@
 
 #define E1000_MDALIGN          4096
 
-/* PCI-Ex registers */
+/* PCI-Ex registers*/
 
 /* PCI-Ex Control Register */
 #define E1000_GCR_RXD_NO_SNOOP          0x00000001
@@ -2224,7 +2226,7 @@
 #define EEPROM_EWDS_OPCODE_MICROWIRE  0x10 /* EEPROM erast/write disable */
 
 /* EEPROM Commands - SPI */
-#define EEPROM_MAX_RETRY_SPI    5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_MAX_RETRY_SPI        5000 /* Max wait of 5ms, for RDY signal */
 #define EEPROM_READ_OPCODE_SPI      0x03  /* EEPROM read opcode */
 #define EEPROM_WRITE_OPCODE_SPI     0x02  /* EEPROM write opcode */
 #define EEPROM_A8_OPCODE_SPI        0x08  /* opcode bit-3 = address bit-8 */
@@ -3082,10 +3084,10 @@
 
 /* DSP Distance Register (Page 5, Register 26) */
 #define GG82563_DSPD_CABLE_LENGTH               0x0007 /* 0 = <50M;
-							      1 = 50-80M;
-							      2 = 80-110M;
-							      3 = 110-140M;
-							      4 = >140M */
+                                                          1 = 50-80M;
+                                                          2 = 80-110M;
+                                                          3 = 110-140M;
+                                                          4 = >140M */
 
 /* Kumeran Mode Control Register (Page 193, Register 16) */
 #define GG82563_KMCR_PHY_LEDS_EN                    0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 726f43d..1d7c999 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -36,7 +36,7 @@
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "7.1.9-k4"DRIVERNAPI
+#define DRV_VERSION "7.2.7-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -48,7 +48,6 @@
  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  */
 static struct pci_device_id e1000_pci_tbl[] = {
-	INTEL_E1000_ETHERNET_DEVICE(0x1000),
 	INTEL_E1000_ETHERNET_DEVICE(0x1001),
 	INTEL_E1000_ETHERNET_DEVICE(0x1004),
 	INTEL_E1000_ETHERNET_DEVICE(0x1008),
@@ -99,6 +98,7 @@
 	INTEL_E1000_ETHERNET_DEVICE(0x1098),
 	INTEL_E1000_ETHERNET_DEVICE(0x1099),
 	INTEL_E1000_ETHERNET_DEVICE(0x109A),
+	INTEL_E1000_ETHERNET_DEVICE(0x10A4),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 	INTEL_E1000_ETHERNET_DEVICE(0x10BA),
@@ -245,7 +245,7 @@
 
 	printk(KERN_INFO "%s\n", e1000_copyright);
 
-	ret = pci_module_init(&e1000_driver);
+	ret = pci_register_driver(&e1000_driver);
 
 	return ret;
 }
@@ -485,7 +485,7 @@
  *
  **/
 
-static void e1000_power_up_phy(struct e1000_adapter *adapter)
+void e1000_power_up_phy(struct e1000_adapter *adapter)
 {
 	uint16_t mii_reg = 0;
 
@@ -682,9 +682,9 @@
 	unsigned long flash_start, flash_len;
 
 	static int cards_found = 0;
-	static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
+	static int global_quad_port_a = 0; /* global ksp3 port a indication */
 	int i, err, pci_using_dac;
-	uint16_t eeprom_data;
+	uint16_t eeprom_data = 0;
 	uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
 	if ((err = pci_enable_device(pdev)))
 		return err;
@@ -696,21 +696,20 @@
 		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
 		    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 			E1000_ERR("No usable DMA configuration, aborting\n");
-			return err;
+			goto err_dma;
 		}
 		pci_using_dac = 0;
 	}
 
 	if ((err = pci_request_regions(pdev, e1000_driver_name)))
-		return err;
+		goto err_pci_reg;
 
 	pci_set_master(pdev);
 
+	err = -ENOMEM;
 	netdev = alloc_etherdev(sizeof(struct e1000_adapter));
-	if (!netdev) {
-		err = -ENOMEM;
+	if (!netdev)
 		goto err_alloc_etherdev;
-	}
 
 	SET_MODULE_OWNER(netdev);
 	SET_NETDEV_DEV(netdev, &pdev->dev);
@@ -725,11 +724,10 @@
 	mmio_start = pci_resource_start(pdev, BAR_0);
 	mmio_len = pci_resource_len(pdev, BAR_0);
 
+	err = -EIO;
 	adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
-	if (!adapter->hw.hw_addr) {
-		err = -EIO;
+	if (!adapter->hw.hw_addr)
 		goto err_ioremap;
-	}
 
 	for (i = BAR_1; i <= BAR_5; i++) {
 		if (pci_resource_len(pdev, i) == 0)
@@ -774,6 +772,7 @@
 	if ((err = e1000_sw_init(adapter)))
 		goto err_sw_init;
 
+	err = -EIO;
 	/* Flash BAR mapping must happen after e1000_sw_init
 	 * because it depends on mac_type */
 	if ((adapter->hw.mac_type == e1000_ich8lan) &&
@@ -781,24 +780,13 @@
 		flash_start = pci_resource_start(pdev, 1);
 		flash_len = pci_resource_len(pdev, 1);
 		adapter->hw.flash_address = ioremap(flash_start, flash_len);
-		if (!adapter->hw.flash_address) {
-			err = -EIO;
+		if (!adapter->hw.flash_address)
 			goto err_flashmap;
-		}
 	}
 
-	if ((err = e1000_check_phy_reset_block(&adapter->hw)))
+	if (e1000_check_phy_reset_block(&adapter->hw))
 		DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 
-	/* if ksp3, indicate if it's port a being setup */
-	if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
-			e1000_ksp3_port_a == 0)
-		adapter->ksp3_port_a = 1;
-	e1000_ksp3_port_a++;
-	/* Reset for multiple KP3 adapters */
-	if (e1000_ksp3_port_a == 4)
-		e1000_ksp3_port_a = 0;
-
 	if (adapter->hw.mac_type >= e1000_82543) {
 		netdev->features = NETIF_F_SG |
 				   NETIF_F_HW_CSUM |
@@ -830,7 +818,7 @@
 
 	if (e1000_init_eeprom_params(&adapter->hw)) {
 		E1000_ERR("EEPROM initialization failed\n");
-		return -EIO;
+		goto err_eeprom;
 	}
 
 	/* before reading the EEPROM, reset the controller to
@@ -842,7 +830,6 @@
 
 	if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
 		DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
-		err = -EIO;
 		goto err_eeprom;
 	}
 
@@ -855,12 +842,9 @@
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
 		DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
-		err = -EIO;
 		goto err_eeprom;
 	}
 
-	e1000_read_part_num(&adapter->hw, &(adapter->part_num));
-
 	e1000_get_bus_info(&adapter->hw);
 
 	init_timer(&adapter->tx_fifo_stall_timer);
@@ -921,7 +905,38 @@
 		break;
 	}
 	if (eeprom_data & eeprom_apme_mask)
-		adapter->wol |= E1000_WUFC_MAG;
+		adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+	/* now that we have the eeprom settings, apply the special cases
+	 * where the eeprom may be wrong or the board simply won't support
+	 * wake on lan on a particular port */
+	switch (pdev->device) {
+	case E1000_DEV_ID_82546GB_PCIE:
+		adapter->eeprom_wol = 0;
+		break;
+	case E1000_DEV_ID_82546EB_FIBER:
+	case E1000_DEV_ID_82546GB_FIBER:
+	case E1000_DEV_ID_82571EB_FIBER:
+		/* Wake events only supported on port A for dual fiber
+		 * regardless of eeprom setting */
+		if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
+			adapter->eeprom_wol = 0;
+		break;
+	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+	case E1000_DEV_ID_82571EB_QUAD_COPPER:
+		/* if quad port adapter, disable WoL on all but port A */
+		if (global_quad_port_a != 0)
+			adapter->eeprom_wol = 0;
+		else
+			adapter->quad_port_a = 1;
+		/* Reset for multiple quad port adapters */
+		if (++global_quad_port_a == 4)
+			global_quad_port_a = 0;
+		break;
+	}
+
+	/* initialize the wol settings based on the eeprom settings */
+	adapter->wol = adapter->eeprom_wol;
 
 	/* print bus type/speed/width info */
 	{
@@ -964,16 +979,33 @@
 	return 0;
 
 err_register:
+	e1000_release_hw_control(adapter);
+err_eeprom:
+	if (!e1000_check_phy_reset_block(&adapter->hw))
+		e1000_phy_hw_reset(&adapter->hw);
+
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
 err_flashmap:
+#ifdef CONFIG_E1000_NAPI
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		dev_put(&adapter->polling_netdev[i]);
+#endif
+
+	kfree(adapter->tx_ring);
+	kfree(adapter->rx_ring);
+#ifdef CONFIG_E1000_NAPI
+	kfree(adapter->polling_netdev);
+#endif
 err_sw_init:
-err_eeprom:
 	iounmap(adapter->hw.hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
 	pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+	pci_disable_device(pdev);
 	return err;
 }
 
@@ -1208,7 +1240,7 @@
 
 	err = e1000_request_irq(adapter);
 	if (err)
-		goto err_up;
+		goto err_req_irq;
 
 	e1000_power_up_phy(adapter);
 
@@ -1229,6 +1261,9 @@
 	return E1000_SUCCESS;
 
 err_up:
+	e1000_power_down_phy(adapter);
+	e1000_free_irq(adapter);
+err_req_irq:
 	e1000_free_all_rx_resources(adapter);
 err_setup_rx:
 	e1000_free_all_tx_resources(adapter);
@@ -1381,10 +1416,6 @@
  * 				  (Descriptors) for all queues
  * @adapter: board private structure
  *
- * If this function returns with an error, then it's possible one or
- * more of the rings is populated (while the rest are not).  It is the
- * callers duty to clean those orphaned rings.
- *
  * Return 0 on success, negative on failure
  **/
 
@@ -1398,6 +1429,9 @@
 		if (err) {
 			DPRINTK(PROBE, ERR,
 				"Allocation for Tx Queue %u failed\n", i);
+			for (i-- ; i >= 0; i--)
+				e1000_free_tx_resources(adapter,
+							&adapter->tx_ring[i]);
 			break;
 		}
 	}
@@ -1499,8 +1533,6 @@
 	} else if (hw->mac_type == e1000_80003es2lan) {
 		tarc = E1000_READ_REG(hw, TARC0);
 		tarc |= 1;
-		if (hw->media_type == e1000_media_type_internal_serdes)
-			tarc |= (1 << 20);
 		E1000_WRITE_REG(hw, TARC0, tarc);
 		tarc = E1000_READ_REG(hw, TARC1);
 		tarc |= 1;
@@ -1639,10 +1671,6 @@
  * 				  (Descriptors) for all queues
  * @adapter: board private structure
  *
- * If this function returns with an error, then it's possible one or
- * more of the rings is populated (while the rest are not).  It is the
- * callers duty to clean those orphaned rings.
- *
  * Return 0 on success, negative on failure
  **/
 
@@ -1656,6 +1684,9 @@
 		if (err) {
 			DPRINTK(PROBE, ERR,
 				"Allocation for Rx Queue %u failed\n", i);
+			for (i-- ; i >= 0; i--)
+				e1000_free_rx_resources(adapter,
+							&adapter->rx_ring[i]);
 			break;
 		}
 	}
@@ -2442,10 +2473,9 @@
 			 * disable receives in the ISR and
 			 * reset device here in the watchdog
 			 */
-			if (adapter->hw.mac_type == e1000_80003es2lan) {
+			if (adapter->hw.mac_type == e1000_80003es2lan)
 				/* reset device */
 				schedule_work(&adapter->reset_task);
-			}
 		}
 
 		e1000_smartspeed(adapter);
@@ -2545,7 +2575,7 @@
 			cmd_length = E1000_TXD_CMD_IP;
 			ipcse = skb->h.raw - skb->data - 1;
 #ifdef NETIF_F_TSO_IPV6
-		} else if (skb->protocol == ntohs(ETH_P_IPV6)) {
+		} else if (skb->protocol == htons(ETH_P_IPV6)) {
 			skb->nh.ipv6h->payload_len = 0;
 			skb->h.th->check =
 				~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
@@ -3680,7 +3710,7 @@
 			E1000_DBG("%s: Receive packet consumed multiple"
 				  " buffers\n", netdev->name);
 			/* recycle */
-			buffer_info-> skb = skb;
+			buffer_info->skb = skb;
 			goto next_desc;
 		}
 
@@ -3711,7 +3741,6 @@
 			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
 			if (new_skb) {
 				skb_reserve(new_skb, NET_IP_ALIGN);
-				new_skb->dev = netdev;
 				memcpy(new_skb->data - NET_IP_ALIGN,
 				       skb->data - NET_IP_ALIGN,
 				       length + NET_IP_ALIGN);
@@ -3978,13 +4007,13 @@
 	buffer_info = &rx_ring->buffer_info[i];
 
 	while (cleaned_count--) {
-		if (!(skb = buffer_info->skb))
-			skb = netdev_alloc_skb(netdev, bufsz);
-		else {
+		skb = buffer_info->skb;
+		if (skb) {
 			skb_trim(skb, 0);
 			goto map_skb;
 		}
 
+		skb = netdev_alloc_skb(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
@@ -4009,10 +4038,10 @@
 				dev_kfree_skb(skb);
 				dev_kfree_skb(oldskb);
 				break; /* while !buffer_info->skb */
-			} else {
-				/* Use new allocation */
-				dev_kfree_skb(oldskb);
 			}
+
+			/* Use new allocation */
+			dev_kfree_skb(oldskb);
 		}
 		/* Make buffer alignment 2 beyond a 16 byte boundary
 		 * this will result in a 16 byte aligned IP header after
@@ -4020,8 +4049,6 @@
 		 */
 		skb_reserve(skb, NET_IP_ALIGN);
 
-		skb->dev = netdev;
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 map_skb:
@@ -4135,8 +4162,6 @@
 		 */
 		skb_reserve(skb, NET_IP_ALIGN);
 
-		skb->dev = netdev;
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_ps_bsize0;
 		buffer_info->dma = pci_map_single(pdev, skb->data,
@@ -4628,7 +4653,7 @@
 		e1000_set_multi(netdev);
 
 		/* turn on all-multi mode if wake on multicast is enabled */
-		if (adapter->wol & E1000_WUFC_MC) {
+		if (wufc & E1000_WUFC_MC) {
 			rctl = E1000_READ_REG(&adapter->hw, RCTL);
 			rctl |= E1000_RCTL_MPE;
 			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
@@ -4700,11 +4725,14 @@
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	uint32_t manc, ret_val;
+	uint32_t manc, err;
 
 	pci_set_power_state(pdev, PCI_D0);
 	e1000_pci_restore_state(adapter);
-	ret_val = pci_enable_device(pdev);
+	if ((err = pci_enable_device(pdev))) {
+		printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+		return err;
+	}
 	pci_set_master(pdev);
 
 	pci_enable_wake(pdev, PCI_D3hot, 0);
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 0ef4131..2128427 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -324,7 +324,6 @@
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
 		DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
-		bd = E1000_MAX_NIC;
 	}
 
 	{ /* Transmit Descriptor Count */
@@ -342,9 +341,14 @@
 		opt.arg.r.max = mac_type < e1000_82544 ?
 			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
-		tx_ring->count = TxDescriptors[bd];
-		e1000_validate_option(&tx_ring->count, &opt, adapter);
-		E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+		if (num_TxDescriptors > bd) {
+			tx_ring->count = TxDescriptors[bd];
+			e1000_validate_option(&tx_ring->count, &opt, adapter);
+			E1000_ROUNDUP(tx_ring->count,
+						REQ_TX_DESCRIPTOR_MULTIPLE);
+		} else {
+			tx_ring->count = opt.def;
+		}
 		for (i = 0; i < adapter->num_tx_queues; i++)
 			tx_ring[i].count = tx_ring->count;
 	}
@@ -363,9 +367,14 @@
 		opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
 			E1000_MAX_82544_RXD;
 
-		rx_ring->count = RxDescriptors[bd];
-		e1000_validate_option(&rx_ring->count, &opt, adapter);
-		E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+		if (num_RxDescriptors > bd) {
+			rx_ring->count = RxDescriptors[bd];
+			e1000_validate_option(&rx_ring->count, &opt, adapter);
+			E1000_ROUNDUP(rx_ring->count,
+						REQ_RX_DESCRIPTOR_MULTIPLE);
+		} else {
+			rx_ring->count = opt.def;
+		}
 		for (i = 0; i < adapter->num_rx_queues; i++)
 			rx_ring[i].count = rx_ring->count;
 	}
@@ -377,9 +386,13 @@
 			.def  = OPTION_ENABLED
 		};
 
-		int rx_csum = XsumRX[bd];
-		e1000_validate_option(&rx_csum, &opt, adapter);
-		adapter->rx_csum = rx_csum;
+		if (num_XsumRX > bd) {
+			int rx_csum = XsumRX[bd];
+			e1000_validate_option(&rx_csum, &opt, adapter);
+			adapter->rx_csum = rx_csum;
+		} else {
+			adapter->rx_csum = opt.def;
+		}
 	}
 	{ /* Flow Control */
 
@@ -399,9 +412,13 @@
 					 .p = fc_list }}
 		};
 
-		int fc = FlowControl[bd];
-		e1000_validate_option(&fc, &opt, adapter);
-		adapter->hw.fc = adapter->hw.original_fc = fc;
+		if (num_FlowControl > bd) {
+			int fc = FlowControl[bd];
+			e1000_validate_option(&fc, &opt, adapter);
+			adapter->hw.fc = adapter->hw.original_fc = fc;
+		} else {
+			adapter->hw.fc = adapter->hw.original_fc = opt.def;
+		}
 	}
 	{ /* Transmit Interrupt Delay */
 		struct e1000_option opt = {
@@ -413,8 +430,13 @@
 					 .max = MAX_TXDELAY }}
 		};
 
-		adapter->tx_int_delay = TxIntDelay[bd];
-		e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
+		if (num_TxIntDelay > bd) {
+			adapter->tx_int_delay = TxIntDelay[bd];
+			e1000_validate_option(&adapter->tx_int_delay, &opt,
+			                      adapter);
+		} else {
+			adapter->tx_int_delay = opt.def;
+		}
 	}
 	{ /* Transmit Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -426,9 +448,13 @@
 					 .max = MAX_TXABSDELAY }}
 		};
 
-		adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
-		e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
-		                      adapter);
+		if (num_TxAbsIntDelay > bd) {
+			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+			                      adapter);
+		} else {
+			adapter->tx_abs_int_delay = opt.def;
+		}
 	}
 	{ /* Receive Interrupt Delay */
 		struct e1000_option opt = {
@@ -440,8 +466,13 @@
 					 .max = MAX_RXDELAY }}
 		};
 
-		adapter->rx_int_delay = RxIntDelay[bd];
-		e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
+		if (num_RxIntDelay > bd) {
+			adapter->rx_int_delay = RxIntDelay[bd];
+			e1000_validate_option(&adapter->rx_int_delay, &opt,
+			                      adapter);
+		} else {
+			adapter->rx_int_delay = opt.def;
+		}
 	}
 	{ /* Receive Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -453,9 +484,13 @@
 					 .max = MAX_RXABSDELAY }}
 		};
 
-		adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
-		e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
-		                      adapter);
+		if (num_RxAbsIntDelay > bd) {
+			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+			                      adapter);
+		} else {
+			adapter->rx_abs_int_delay = opt.def;
+		}
 	}
 	{ /* Interrupt Throttling Rate */
 		struct e1000_option opt = {
@@ -467,18 +502,24 @@
 					 .max = MAX_ITR }}
 		};
 
-		adapter->itr = InterruptThrottleRate[bd];
-		switch (adapter->itr) {
-		case 0:
-			DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
-			break;
-		case 1:
-			DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
-				opt.name);
-			break;
-		default:
-			e1000_validate_option(&adapter->itr, &opt, adapter);
-			break;
+		if (num_InterruptThrottleRate > bd) {
+			adapter->itr = InterruptThrottleRate[bd];
+			switch (adapter->itr) {
+			case 0:
+				DPRINTK(PROBE, INFO, "%s turned off\n",
+				        opt.name);
+				break;
+			case 1:
+				DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+				        opt.name);
+				break;
+			default:
+				e1000_validate_option(&adapter->itr, &opt,
+				                      adapter);
+				break;
+			}
+		} else {
+			adapter->itr = opt.def;
 		}
 	}
 	{ /* Smart Power Down */
@@ -489,9 +530,13 @@
 			.def  = OPTION_DISABLED
 		};
 
-		int spd = SmartPowerDownEnable[bd];
-		e1000_validate_option(&spd, &opt, adapter);
-		adapter->smart_power_down = spd;
+		if (num_SmartPowerDownEnable > bd) {
+			int spd = SmartPowerDownEnable[bd];
+			e1000_validate_option(&spd, &opt, adapter);
+			adapter->smart_power_down = spd;
+		} else {
+			adapter->smart_power_down = opt.def;
+		}
 	}
 	{ /* Kumeran Lock Loss Workaround */
 		struct e1000_option opt = {
@@ -501,9 +546,13 @@
 			.def  = OPTION_ENABLED
 		};
 
+		if (num_KumeranLockLoss > bd) {
 			int kmrn_lock_loss = KumeranLockLoss[bd];
 			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
 			adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+		} else {
+			adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
+		}
 	}
 
 	switch (adapter->hw.media_type) {
@@ -530,18 +579,17 @@
 e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
-	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
-	if ((Speed[bd] != OPTION_UNSET)) {
+	if (num_Speed > bd) {
 		DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if ((Duplex[bd] != OPTION_UNSET)) {
+	if (num_Duplex > bd) {
 		DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
+	if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
 		DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
 				 "not valid for fiber adapters, "
 				 "parameter ignored\n");
@@ -560,7 +608,6 @@
 {
 	int speed, dplx, an;
 	int bd = adapter->bd_number;
-	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
 
 	{ /* Speed */
 		struct e1000_opt_list speed_list[] = {{          0, "" },
@@ -577,8 +624,12 @@
 					 .p = speed_list }}
 		};
 
-		speed = Speed[bd];
-		e1000_validate_option(&speed, &opt, adapter);
+		if (num_Speed > bd) {
+			speed = Speed[bd];
+			e1000_validate_option(&speed, &opt, adapter);
+		} else {
+			speed = opt.def;
+		}
 	}
 	{ /* Duplex */
 		struct e1000_opt_list dplx_list[] = {{           0, "" },
@@ -600,11 +651,15 @@
 			        "Speed/Duplex/AutoNeg parameter ignored.\n");
 			return;
 		}
-		dplx = Duplex[bd];
-		e1000_validate_option(&dplx, &opt, adapter);
+		if (num_Duplex > bd) {
+			dplx = Duplex[bd];
+			e1000_validate_option(&dplx, &opt, adapter);
+		} else {
+			dplx = opt.def;
+		}
 	}
 
-	if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
+	if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
 		DPRINTK(PROBE, INFO,
 		       "AutoNeg specified along with Speed or Duplex, "
 		       "parameter ignored\n");
@@ -653,15 +708,19 @@
 					 .p = an_list }}
 		};
 
-		an = AutoNeg[bd];
-		e1000_validate_option(&an, &opt, adapter);
+		if (num_AutoNeg > bd) {
+			an = AutoNeg[bd];
+			e1000_validate_option(&an, &opt, adapter);
+		} else {
+			an = opt.def;
+		}
 		adapter->hw.autoneg_advertised = an;
 	}
 
 	switch (speed + dplx) {
 	case 0:
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
-		if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
+		if ((num_Speed > bd) && (speed != 0 || dplx != 0))
 			DPRINTK(PROBE, INFO,
 			       "Speed and duplex autonegotiation enabled\n");
 		break;
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index e445988..a3d515d 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -2385,7 +2385,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init(&eepro100_driver);
+	return pci_register_driver(&eepro100_driver);
 }
 
 static void __exit eepro100_cleanup_module(void)
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index a67650cc..25c4619 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -1604,7 +1604,7 @@
 		version, version2, version3);
 #endif
 
-	return pci_module_init (&epic_driver);
+	return pci_register_driver(&epic_driver);
 }
 
 
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 567e274..a2121fa 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1984,7 +1984,7 @@
 	printk(version);
 #endif
 
-	return pci_module_init(&fealnx_driver);
+	return pci_register_driver(&fealnx_driver);
 }
 
 static void __exit fealnx_exit(void)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 11b8f1b..e90d27b 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -109,6 +109,7 @@
  *	0.54: 21 Mar 2006: Fix spin locks for multi irqs and cleanup.
  *	0.55: 22 Mar 2006: Add flow control (pause frame).
  *	0.56: 22 Mar 2006: Additional ethtool config and moduleparam support.
+ *	0.57: 14 May 2006: Mac address set in probe/remove and order corrections.
  *
  * Known bugs:
  * We suspect that on some hardware no TX done interrupts are generated.
@@ -120,7 +121,12 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
-#define FORCEDETH_VERSION		"0.56"
+#ifdef CONFIG_FORCEDETH_NAPI
+#define DRIVERNAPI "-NAPI"
+#else
+#define DRIVERNAPI
+#endif
+#define FORCEDETH_VERSION		"0.57"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
@@ -262,7 +268,8 @@
 	NvRegRingSizes = 0x108,
 #define NVREG_RINGSZ_TXSHIFT 0
 #define NVREG_RINGSZ_RXSHIFT 16
-	NvRegUnknownTransmitterReg = 0x10c,
+	NvRegTransmitPoll = 0x10c,
+#define NVREG_TRANSMITPOLL_MAC_ADDR_REV	0x00008000
 	NvRegLinkSpeed = 0x110,
 #define NVREG_LINKSPEED_FORCE 0x10000
 #define NVREG_LINKSPEED_10	1000
@@ -381,21 +388,21 @@
 
 /* Big endian: should work, but is untested */
 struct ring_desc {
-	u32 PacketBuffer;
-	u32 FlagLen;
+	__le32 buf;
+	__le32 flaglen;
 };
 
 struct ring_desc_ex {
-	u32 PacketBufferHigh;
-	u32 PacketBufferLow;
-	u32 TxVlan;
-	u32 FlagLen;
+	__le32 bufhigh;
+	__le32 buflow;
+	__le32 txvlan;
+	__le32 flaglen;
 };
 
-typedef union _ring_type {
+union ring_type {
 	struct ring_desc* orig;
 	struct ring_desc_ex* ex;
-} ring_type;
+};
 
 #define FLAG_MASK_V1 0xffff0000
 #define FLAG_MASK_V2 0xffffc000
@@ -536,6 +543,9 @@
 #define PHYID1_OUI_SHFT	6
 #define PHYID2_OUI_MASK	0xfc00
 #define PHYID2_OUI_SHFT	10
+#define PHYID2_MODEL_MASK		0x03f0
+#define PHY_MODEL_MARVELL_E3016		0x220
+#define PHY_MARVELL_E3016_INITMASK	0x0300
 #define PHY_INIT1	0x0f000
 #define PHY_INIT2	0x0e00
 #define PHY_INIT3	0x01000
@@ -653,8 +663,8 @@
 };
 
 struct register_test {
-	u32 reg;
-	u32 mask;
+	__le32 reg;
+	__le32 mask;
 };
 
 static const struct register_test nv_registers_test[] = {
@@ -694,6 +704,7 @@
 	int phyaddr;
 	int wolenabled;
 	unsigned int phy_oui;
+	unsigned int phy_model;
 	u16 gigabit;
 	int intr_test;
 
@@ -707,13 +718,14 @@
 	u32 vlanctl_bits;
 	u32 driver_data;
 	u32 register_size;
+	int rx_csum;
 
 	void __iomem *base;
 
 	/* rx specific fields.
 	 * Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
 	 */
-	ring_type rx_ring;
+	union ring_type rx_ring;
 	unsigned int cur_rx, refill_rx;
 	struct sk_buff **rx_skbuff;
 	dma_addr_t *rx_dma;
@@ -733,7 +745,7 @@
 	/*
 	 * tx specific fields.
 	 */
-	ring_type tx_ring;
+	union ring_type tx_ring;
 	unsigned int next_tx, nic_tx;
 	struct sk_buff **tx_skbuff;
 	dma_addr_t *tx_dma;
@@ -826,13 +838,13 @@
 
 static inline u32 nv_descr_getlength(struct ring_desc *prd, u32 v)
 {
-	return le32_to_cpu(prd->FlagLen)
+	return le32_to_cpu(prd->flaglen)
 		& ((v == DESC_VER_1) ? LEN_MASK_V1 : LEN_MASK_V2);
 }
 
 static inline u32 nv_descr_getlength_ex(struct ring_desc_ex *prd, u32 v)
 {
-	return le32_to_cpu(prd->FlagLen) & LEN_MASK_V2;
+	return le32_to_cpu(prd->flaglen) & LEN_MASK_V2;
 }
 
 static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
@@ -885,7 +897,7 @@
 	struct fe_priv *np = get_nvpriv(dev);
 
 	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-		if(np->rx_ring.orig)
+		if (np->rx_ring.orig)
 			pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (np->rx_ring_size + np->tx_ring_size),
 					    np->rx_ring.orig, np->ring_addr);
 	} else {
@@ -1020,14 +1032,13 @@
 	return retval;
 }
 
-static int phy_reset(struct net_device *dev)
+static int phy_reset(struct net_device *dev, u32 bmcr_setup)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	u32 miicontrol;
 	unsigned int tries = 0;
 
-	miicontrol = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
-	miicontrol |= BMCR_RESET;
+	miicontrol = BMCR_RESET | bmcr_setup;
 	if (mii_rw(dev, np->phyaddr, MII_BMCR, miicontrol)) {
 		return -1;
 	}
@@ -1052,6 +1063,16 @@
 	u8 __iomem *base = get_hwbase(dev);
 	u32 phyinterface, phy_reserved, mii_status, mii_control, mii_control_1000,reg;
 
+	/* phy errata for E3016 phy */
+	if (np->phy_model == PHY_MODEL_MARVELL_E3016) {
+		reg = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
+		reg &= ~PHY_MARVELL_E3016_INITMASK;
+		if (mii_rw(dev, np->phyaddr, MII_NCONFIG, reg)) {
+			printk(KERN_INFO "%s: phy write to errata reg failed.\n", pci_name(np->pci_dev));
+			return PHY_ERROR;
+		}
+	}
+
 	/* set advertise register */
 	reg = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
 	reg |= (ADVERTISE_10HALF|ADVERTISE_10FULL|ADVERTISE_100HALF|ADVERTISE_100FULL|ADVERTISE_PAUSE_ASYM|ADVERTISE_PAUSE_CAP);
@@ -1082,8 +1103,13 @@
 	else
 		np->gigabit = 0;
 
-	/* reset the phy */
-	if (phy_reset(dev)) {
+	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+	mii_control |= BMCR_ANENABLE;
+
+	/* reset the phy
+	 * (certain phys need bmcr to be setup with reset)
+	 */
+	if (phy_reset(dev, mii_control)) {
 		printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
 		return PHY_ERROR;
 	}
@@ -1178,7 +1204,7 @@
 			KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
 
 	udelay(NV_TXSTOP_DELAY2);
-	writel(0, base + NvRegUnknownTransmitterReg);
+	writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
 }
 
 static void nv_txrx_reset(struct net_device *dev)
@@ -1258,14 +1284,14 @@
 		np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data,
 					skb->end-skb->data, PCI_DMA_FROMDEVICE);
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-			np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]);
+			np->rx_ring.orig[nr].buf = cpu_to_le32(np->rx_dma[nr]);
 			wmb();
-			np->rx_ring.orig[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL);
+			np->rx_ring.orig[nr].flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL);
 		} else {
-			np->rx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->rx_dma[nr]) >> 32;
-			np->rx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF;
+			np->rx_ring.ex[nr].bufhigh = cpu_to_le64(np->rx_dma[nr]) >> 32;
+			np->rx_ring.ex[nr].buflow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF;
 			wmb();
-			np->rx_ring.ex[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL);
+			np->rx_ring.ex[nr].flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL);
 		}
 		dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n",
 					dev->name, refill_rx);
@@ -1277,6 +1303,16 @@
 	return 0;
 }
 
+/* If rx bufs are exhausted called after 50ms to attempt to refresh */
+#ifdef CONFIG_FORCEDETH_NAPI
+static void nv_do_rx_refill(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+
+	/* Just reschedule NAPI rx processing */
+	netif_rx_schedule(dev);
+}
+#else
 static void nv_do_rx_refill(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *) data;
@@ -1305,6 +1341,7 @@
 		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
 }
+#endif
 
 static void nv_init_rx(struct net_device *dev)
 {
@@ -1315,9 +1352,9 @@
 	np->refill_rx = 0;
 	for (i = 0; i < np->rx_ring_size; i++)
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
-			np->rx_ring.orig[i].FlagLen = 0;
+			np->rx_ring.orig[i].flaglen = 0;
 	        else
-			np->rx_ring.ex[i].FlagLen = 0;
+			np->rx_ring.ex[i].flaglen = 0;
 }
 
 static void nv_init_tx(struct net_device *dev)
@@ -1328,9 +1365,9 @@
 	np->next_tx = np->nic_tx = 0;
 	for (i = 0; i < np->tx_ring_size; i++) {
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
-			np->tx_ring.orig[i].FlagLen = 0;
+			np->tx_ring.orig[i].flaglen = 0;
 	        else
-			np->tx_ring.ex[i].FlagLen = 0;
+			np->tx_ring.ex[i].flaglen = 0;
 		np->tx_skbuff[i] = NULL;
 		np->tx_dma[i] = 0;
 	}
@@ -1373,9 +1410,9 @@
 
 	for (i = 0; i < np->tx_ring_size; i++) {
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
-			np->tx_ring.orig[i].FlagLen = 0;
+			np->tx_ring.orig[i].flaglen = 0;
 		else
-			np->tx_ring.ex[i].FlagLen = 0;
+			np->tx_ring.ex[i].flaglen = 0;
 		if (nv_release_txskb(dev, i))
 			np->stats.tx_dropped++;
 	}
@@ -1387,9 +1424,9 @@
 	int i;
 	for (i = 0; i < np->rx_ring_size; i++) {
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
-			np->rx_ring.orig[i].FlagLen = 0;
+			np->rx_ring.orig[i].flaglen = 0;
 		else
-			np->rx_ring.ex[i].FlagLen = 0;
+			np->rx_ring.ex[i].flaglen = 0;
 		wmb();
 		if (np->rx_skbuff[i]) {
 			pci_unmap_single(np->pci_dev, np->rx_dma[i],
@@ -1450,17 +1487,17 @@
 		np->tx_dma_len[nr] = bcnt;
 
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-			np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
-			np->tx_ring.orig[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags);
+			np->tx_ring.orig[nr].buf = cpu_to_le32(np->tx_dma[nr]);
+			np->tx_ring.orig[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 		} else {
-			np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
-			np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
-			np->tx_ring.ex[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags);
+			np->tx_ring.ex[nr].bufhigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
+			np->tx_ring.ex[nr].buflow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
+			np->tx_ring.ex[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 		}
 		tx_flags = np->tx_flags;
 		offset += bcnt;
 		size -= bcnt;
-	} while(size);
+	} while (size);
 
 	/* setup the fragments */
 	for (i = 0; i < fragments; i++) {
@@ -1477,12 +1514,12 @@
 			np->tx_dma_len[nr] = bcnt;
 
 			if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-				np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
-				np->tx_ring.orig[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags);
+				np->tx_ring.orig[nr].buf = cpu_to_le32(np->tx_dma[nr]);
+				np->tx_ring.orig[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 			} else {
-				np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
-				np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
-				np->tx_ring.ex[nr].FlagLen = cpu_to_le32((bcnt-1) | tx_flags);
+				np->tx_ring.ex[nr].bufhigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
+				np->tx_ring.ex[nr].buflow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
+				np->tx_ring.ex[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
 			}
 			offset += bcnt;
 			size -= bcnt;
@@ -1491,9 +1528,9 @@
 
 	/* set last fragment flag  */
 	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-		np->tx_ring.orig[nr].FlagLen |= cpu_to_le32(tx_flags_extra);
+		np->tx_ring.orig[nr].flaglen |= cpu_to_le32(tx_flags_extra);
 	} else {
-		np->tx_ring.ex[nr].FlagLen |= cpu_to_le32(tx_flags_extra);
+		np->tx_ring.ex[nr].flaglen |= cpu_to_le32(tx_flags_extra);
 	}
 
 	np->tx_skbuff[nr] = skb;
@@ -1512,10 +1549,10 @@
 
 	/* set tx flags */
 	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-		np->tx_ring.orig[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra);
+		np->tx_ring.orig[start_nr].flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
 	} else {
-		np->tx_ring.ex[start_nr].TxVlan = cpu_to_le32(tx_flags_vlan);
-		np->tx_ring.ex[start_nr].FlagLen |= cpu_to_le32(tx_flags | tx_flags_extra);
+		np->tx_ring.ex[start_nr].txvlan = cpu_to_le32(tx_flags_vlan);
+		np->tx_ring.ex[start_nr].flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
 	}
 
 	dprintk(KERN_DEBUG "%s: nv_start_xmit: packet %d (entries %d) queued for transmission. tx_flags_extra: %x\n",
@@ -1547,7 +1584,7 @@
 static void nv_tx_done(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
-	u32 Flags;
+	u32 flags;
 	unsigned int i;
 	struct sk_buff *skb;
 
@@ -1555,22 +1592,22 @@
 		i = np->nic_tx % np->tx_ring_size;
 
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
-			Flags = le32_to_cpu(np->tx_ring.orig[i].FlagLen);
+			flags = le32_to_cpu(np->tx_ring.orig[i].flaglen);
 		else
-			Flags = le32_to_cpu(np->tx_ring.ex[i].FlagLen);
+			flags = le32_to_cpu(np->tx_ring.ex[i].flaglen);
 
-		dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, Flags 0x%x.\n",
-					dev->name, np->nic_tx, Flags);
-		if (Flags & NV_TX_VALID)
+		dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, flags 0x%x.\n",
+					dev->name, np->nic_tx, flags);
+		if (flags & NV_TX_VALID)
 			break;
 		if (np->desc_ver == DESC_VER_1) {
-			if (Flags & NV_TX_LASTPACKET) {
+			if (flags & NV_TX_LASTPACKET) {
 				skb = np->tx_skbuff[i];
-				if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION|
+				if (flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION|
 					     NV_TX_UNDERFLOW|NV_TX_ERROR)) {
-					if (Flags & NV_TX_UNDERFLOW)
+					if (flags & NV_TX_UNDERFLOW)
 						np->stats.tx_fifo_errors++;
-					if (Flags & NV_TX_CARRIERLOST)
+					if (flags & NV_TX_CARRIERLOST)
 						np->stats.tx_carrier_errors++;
 					np->stats.tx_errors++;
 				} else {
@@ -1579,13 +1616,13 @@
 				}
 			}
 		} else {
-			if (Flags & NV_TX2_LASTPACKET) {
+			if (flags & NV_TX2_LASTPACKET) {
 				skb = np->tx_skbuff[i];
-				if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION|
+				if (flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION|
 					     NV_TX2_UNDERFLOW|NV_TX2_ERROR)) {
-					if (Flags & NV_TX2_UNDERFLOW)
+					if (flags & NV_TX2_UNDERFLOW)
 						np->stats.tx_fifo_errors++;
-					if (Flags & NV_TX2_CARRIERLOST)
+					if (flags & NV_TX2_CARRIERLOST)
 						np->stats.tx_carrier_errors++;
 					np->stats.tx_errors++;
 				} else {
@@ -1638,29 +1675,29 @@
 			if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
 				printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
 				       i,
-				       le32_to_cpu(np->tx_ring.orig[i].PacketBuffer),
-				       le32_to_cpu(np->tx_ring.orig[i].FlagLen),
-				       le32_to_cpu(np->tx_ring.orig[i+1].PacketBuffer),
-				       le32_to_cpu(np->tx_ring.orig[i+1].FlagLen),
-				       le32_to_cpu(np->tx_ring.orig[i+2].PacketBuffer),
-				       le32_to_cpu(np->tx_ring.orig[i+2].FlagLen),
-				       le32_to_cpu(np->tx_ring.orig[i+3].PacketBuffer),
-				       le32_to_cpu(np->tx_ring.orig[i+3].FlagLen));
+				       le32_to_cpu(np->tx_ring.orig[i].buf),
+				       le32_to_cpu(np->tx_ring.orig[i].flaglen),
+				       le32_to_cpu(np->tx_ring.orig[i+1].buf),
+				       le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
+				       le32_to_cpu(np->tx_ring.orig[i+2].buf),
+				       le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
+				       le32_to_cpu(np->tx_ring.orig[i+3].buf),
+				       le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
 			} else {
 				printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
 				       i,
-				       le32_to_cpu(np->tx_ring.ex[i].PacketBufferHigh),
-				       le32_to_cpu(np->tx_ring.ex[i].PacketBufferLow),
-				       le32_to_cpu(np->tx_ring.ex[i].FlagLen),
-				       le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferHigh),
-				       le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferLow),
-				       le32_to_cpu(np->tx_ring.ex[i+1].FlagLen),
-				       le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferHigh),
-				       le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferLow),
-				       le32_to_cpu(np->tx_ring.ex[i+2].FlagLen),
-				       le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferHigh),
-				       le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferLow),
-				       le32_to_cpu(np->tx_ring.ex[i+3].FlagLen));
+				       le32_to_cpu(np->tx_ring.ex[i].bufhigh),
+				       le32_to_cpu(np->tx_ring.ex[i].buflow),
+				       le32_to_cpu(np->tx_ring.ex[i].flaglen),
+				       le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
+				       le32_to_cpu(np->tx_ring.ex[i+1].buflow),
+				       le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
+				       le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
+				       le32_to_cpu(np->tx_ring.ex[i+2].buflow),
+				       le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
+				       le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
+				       le32_to_cpu(np->tx_ring.ex[i+3].buflow),
+				       le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
 			}
 		}
 	}
@@ -1697,7 +1734,7 @@
 	int protolen;	/* length as stored in the proto field */
 
 	/* 1) calculate len according to header */
-	if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == __constant_htons(ETH_P_8021Q)) {
+	if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == htons(ETH_P_8021Q)) {
 		protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto );
 		hdrlen = VLAN_HLEN;
 	} else {
@@ -1740,13 +1777,14 @@
 	}
 }
 
-static void nv_rx_process(struct net_device *dev)
+static int nv_rx_process(struct net_device *dev, int limit)
 {
 	struct fe_priv *np = netdev_priv(dev);
-	u32 Flags;
+	u32 flags;
 	u32 vlanflags = 0;
+	int count;
 
-	for (;;) {
+ 	for (count = 0; count < limit; ++count) {
 		struct sk_buff *skb;
 		int len;
 		int i;
@@ -1755,18 +1793,18 @@
 
 		i = np->cur_rx % np->rx_ring_size;
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-			Flags = le32_to_cpu(np->rx_ring.orig[i].FlagLen);
+			flags = le32_to_cpu(np->rx_ring.orig[i].flaglen);
 			len = nv_descr_getlength(&np->rx_ring.orig[i], np->desc_ver);
 		} else {
-			Flags = le32_to_cpu(np->rx_ring.ex[i].FlagLen);
+			flags = le32_to_cpu(np->rx_ring.ex[i].flaglen);
 			len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver);
-			vlanflags = le32_to_cpu(np->rx_ring.ex[i].PacketBufferLow);
+			vlanflags = le32_to_cpu(np->rx_ring.ex[i].buflow);
 		}
 
-		dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, Flags 0x%x.\n",
-					dev->name, np->cur_rx, Flags);
+		dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, flags 0x%x.\n",
+					dev->name, np->cur_rx, flags);
 
-		if (Flags & NV_RX_AVAIL)
+		if (flags & NV_RX_AVAIL)
 			break;	/* still owned by hardware, */
 
 		/*
@@ -1780,7 +1818,7 @@
 
 		{
 			int j;
-			dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",Flags);
+			dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",flags);
 			for (j=0; j<64; j++) {
 				if ((j%16) == 0)
 					dprintk("\n%03x:", j);
@@ -1790,30 +1828,30 @@
 		}
 		/* look at what we actually got: */
 		if (np->desc_ver == DESC_VER_1) {
-			if (!(Flags & NV_RX_DESCRIPTORVALID))
+			if (!(flags & NV_RX_DESCRIPTORVALID))
 				goto next_pkt;
 
-			if (Flags & NV_RX_ERROR) {
-				if (Flags & NV_RX_MISSEDFRAME) {
+			if (flags & NV_RX_ERROR) {
+				if (flags & NV_RX_MISSEDFRAME) {
 					np->stats.rx_missed_errors++;
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) {
+				if (flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) {
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & NV_RX_CRCERR) {
+				if (flags & NV_RX_CRCERR) {
 					np->stats.rx_crc_errors++;
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & NV_RX_OVERFLOW) {
+				if (flags & NV_RX_OVERFLOW) {
 					np->stats.rx_over_errors++;
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & NV_RX_ERROR4) {
+				if (flags & NV_RX_ERROR4) {
 					len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
 					if (len < 0) {
 						np->stats.rx_errors++;
@@ -1821,32 +1859,32 @@
 					}
 				}
 				/* framing errors are soft errors. */
-				if (Flags & NV_RX_FRAMINGERR) {
-					if (Flags & NV_RX_SUBSTRACT1) {
+				if (flags & NV_RX_FRAMINGERR) {
+					if (flags & NV_RX_SUBSTRACT1) {
 						len--;
 					}
 				}
 			}
 		} else {
-			if (!(Flags & NV_RX2_DESCRIPTORVALID))
+			if (!(flags & NV_RX2_DESCRIPTORVALID))
 				goto next_pkt;
 
-			if (Flags & NV_RX2_ERROR) {
-				if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) {
+			if (flags & NV_RX2_ERROR) {
+				if (flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) {
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & NV_RX2_CRCERR) {
+				if (flags & NV_RX2_CRCERR) {
 					np->stats.rx_crc_errors++;
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & NV_RX2_OVERFLOW) {
+				if (flags & NV_RX2_OVERFLOW) {
 					np->stats.rx_over_errors++;
 					np->stats.rx_errors++;
 					goto next_pkt;
 				}
-				if (Flags & NV_RX2_ERROR4) {
+				if (flags & NV_RX2_ERROR4) {
 					len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
 					if (len < 0) {
 						np->stats.rx_errors++;
@@ -1854,17 +1892,17 @@
 					}
 				}
 				/* framing errors are soft errors */
-				if (Flags & NV_RX2_FRAMINGERR) {
-					if (Flags & NV_RX2_SUBSTRACT1) {
+				if (flags & NV_RX2_FRAMINGERR) {
+					if (flags & NV_RX2_SUBSTRACT1) {
 						len--;
 					}
 				}
 			}
-			if (np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) {
-				Flags &= NV_RX2_CHECKSUMMASK;
-				if (Flags == NV_RX2_CHECKSUMOK1 ||
-				    Flags == NV_RX2_CHECKSUMOK2 ||
-				    Flags == NV_RX2_CHECKSUMOK3) {
+			if (np->rx_csum) {
+				flags &= NV_RX2_CHECKSUMMASK;
+				if (flags == NV_RX2_CHECKSUMOK1 ||
+				    flags == NV_RX2_CHECKSUMOK2 ||
+				    flags == NV_RX2_CHECKSUMOK3) {
 					dprintk(KERN_DEBUG "%s: hw checksum hit!.\n", dev->name);
 					np->rx_skbuff[i]->ip_summed = CHECKSUM_UNNECESSARY;
 				} else {
@@ -1880,17 +1918,27 @@
 		skb->protocol = eth_type_trans(skb, dev);
 		dprintk(KERN_DEBUG "%s: nv_rx_process: packet %d with %d bytes, proto %d accepted.\n",
 					dev->name, np->cur_rx, len, skb->protocol);
-		if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT)) {
-			vlan_hwaccel_rx(skb, np->vlangrp, vlanflags & NV_RX3_VLAN_TAG_MASK);
-		} else {
+#ifdef CONFIG_FORCEDETH_NAPI
+		if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT))
+			vlan_hwaccel_receive_skb(skb, np->vlangrp,
+						 vlanflags & NV_RX3_VLAN_TAG_MASK);
+		else
+			netif_receive_skb(skb);
+#else
+		if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT))
+			vlan_hwaccel_rx(skb, np->vlangrp,
+					vlanflags & NV_RX3_VLAN_TAG_MASK);
+		else
 			netif_rx(skb);
-		}
+#endif
 		dev->last_rx = jiffies;
 		np->stats.rx_packets++;
 		np->stats.rx_bytes += len;
 next_pkt:
 		np->cur_rx++;
 	}
+
+	return count;
 }
 
 static void set_bufsize(struct net_device *dev)
@@ -1990,7 +2038,7 @@
 	struct fe_priv *np = netdev_priv(dev);
 	struct sockaddr *macaddr = (struct sockaddr*)addr;
 
-	if(!is_valid_ether_addr(macaddr->sa_data))
+	if (!is_valid_ether_addr(macaddr->sa_data))
 		return -EADDRNOTAVAIL;
 
 	/* synchronized against open : rtnl_lock() held by caller */
@@ -2283,20 +2331,20 @@
 			lpa_pause = lpa & (LPA_PAUSE_CAP| LPA_PAUSE_ASYM);
 
 			switch (adv_pause) {
-			case (ADVERTISE_PAUSE_CAP):
+			case ADVERTISE_PAUSE_CAP:
 				if (lpa_pause & LPA_PAUSE_CAP) {
 					pause_flags |= NV_PAUSEFRAME_RX_ENABLE;
 					if (np->pause_flags & NV_PAUSEFRAME_TX_REQ)
 						pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
 				}
 				break;
-			case (ADVERTISE_PAUSE_ASYM):
+			case ADVERTISE_PAUSE_ASYM:
 				if (lpa_pause == (LPA_PAUSE_CAP| LPA_PAUSE_ASYM))
 				{
 					pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
 				}
 				break;
-			case (ADVERTISE_PAUSE_CAP| ADVERTISE_PAUSE_ASYM):
+			case ADVERTISE_PAUSE_CAP| ADVERTISE_PAUSE_ASYM:
 				if (lpa_pause & LPA_PAUSE_CAP)
 				{
 					pause_flags |=  NV_PAUSEFRAME_RX_ENABLE;
@@ -2376,14 +2424,6 @@
 		nv_tx_done(dev);
 		spin_unlock(&np->lock);
 
-		nv_rx_process(dev);
-		if (nv_alloc_rx(dev)) {
-			spin_lock(&np->lock);
-			if (!np->in_shutdown)
-				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-			spin_unlock(&np->lock);
-		}
-
 		if (events & NVREG_IRQ_LINK) {
 			spin_lock(&np->lock);
 			nv_link_irq(dev);
@@ -2403,6 +2443,29 @@
 			printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n",
 						dev->name, events);
 		}
+#ifdef CONFIG_FORCEDETH_NAPI
+		if (events & NVREG_IRQ_RX_ALL) {
+			netif_rx_schedule(dev);
+
+			/* Disable furthur receive irq's */
+			spin_lock(&np->lock);
+			np->irqmask &= ~NVREG_IRQ_RX_ALL;
+
+			if (np->msi_flags & NV_MSI_X_ENABLED)
+				writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
+			else
+				writel(np->irqmask, base + NvRegIrqMask);
+			spin_unlock(&np->lock);
+		}
+#else
+		nv_rx_process(dev, dev->weight);
+		if (nv_alloc_rx(dev)) {
+			spin_lock(&np->lock);
+			if (!np->in_shutdown)
+				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+			spin_unlock(&np->lock);
+		}
+#endif
 		if (i > max_interrupt_work) {
 			spin_lock(&np->lock);
 			/* disable interrupts on the nic */
@@ -2474,6 +2537,63 @@
 	return IRQ_RETVAL(i);
 }
 
+#ifdef CONFIG_FORCEDETH_NAPI
+static int nv_napi_poll(struct net_device *dev, int *budget)
+{
+	int pkts, limit = min(*budget, dev->quota);
+	struct fe_priv *np = netdev_priv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+
+	pkts = nv_rx_process(dev, limit);
+
+	if (nv_alloc_rx(dev)) {
+		spin_lock_irq(&np->lock);
+		if (!np->in_shutdown)
+			mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+		spin_unlock_irq(&np->lock);
+	}
+
+	if (pkts < limit) {
+		/* all done, no more packets present */
+		netif_rx_complete(dev);
+
+		/* re-enable receive interrupts */
+		spin_lock_irq(&np->lock);
+		np->irqmask |= NVREG_IRQ_RX_ALL;
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
+		else
+			writel(np->irqmask, base + NvRegIrqMask);
+		spin_unlock_irq(&np->lock);
+		return 0;
+	} else {
+		/* used up our quantum, so reschedule */
+		dev->quota -= pkts;
+		*budget -= pkts;
+		return 1;
+	}
+}
+#endif
+
+#ifdef CONFIG_FORCEDETH_NAPI
+static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
+{
+	struct net_device *dev = (struct net_device *) data;
+	u8 __iomem *base = get_hwbase(dev);
+	u32 events;
+
+	events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL;
+	writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus);
+
+	if (events) {
+		netif_rx_schedule(dev);
+		/* disable receive interrupts on the nic */
+		writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
+		pci_push(base);
+	}
+	return IRQ_HANDLED;
+}
+#else
 static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 {
 	struct net_device *dev = (struct net_device *) data;
@@ -2492,7 +2612,7 @@
 		if (!(events & np->irqmask))
 			break;
 
-		nv_rx_process(dev);
+		nv_rx_process(dev, dev->weight);
 		if (nv_alloc_rx(dev)) {
 			spin_lock_irq(&np->lock);
 			if (!np->in_shutdown)
@@ -2514,12 +2634,12 @@
 			spin_unlock_irq(&np->lock);
 			break;
 		}
-
 	}
 	dprintk(KERN_DEBUG "%s: nv_nic_irq_rx completed\n", dev->name);
 
 	return IRQ_RETVAL(i);
 }
+#endif
 
 static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 {
@@ -3057,9 +3177,18 @@
 		if (netif_running(dev))
 			printk(KERN_INFO "%s: link down.\n", dev->name);
 		bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
-		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-		mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
-
+		if (np->phy_model == PHY_MODEL_MARVELL_E3016) {
+			bmcr |= BMCR_ANENABLE;
+			/* reset the phy in order for settings to stick,
+			 * and cause autoneg to start */
+			if (phy_reset(dev, bmcr)) {
+				printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+				return -EINVAL;
+			}
+		} else {
+			bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+			mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
+		}
 	} else {
 		int adv, bmcr;
 
@@ -3099,17 +3228,19 @@
 			bmcr |= BMCR_FULLDPLX;
 		if (np->fixed_mode & (ADVERTISE_100HALF|ADVERTISE_100FULL))
 			bmcr |= BMCR_SPEED100;
-		mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
 		if (np->phy_oui == PHY_OUI_MARVELL) {
-			/* reset the phy */
-			if (phy_reset(dev)) {
+			/* reset the phy in order for forced mode settings to stick */
+			if (phy_reset(dev, bmcr)) {
 				printk(KERN_INFO "%s: phy reset failed\n", dev->name);
 				return -EINVAL;
 			}
-		} else if (netif_running(dev)) {
-			/* Wait a bit and then reconfigure the nic. */
-			udelay(10);
-			nv_linkchange(dev);
+		} else {
+			mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
+			if (netif_running(dev)) {
+				/* Wait a bit and then reconfigure the nic. */
+				udelay(10);
+				nv_linkchange(dev);
+			}
 		}
 	}
 
@@ -3166,8 +3297,17 @@
 		}
 
 		bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
-		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-		mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
+		if (np->phy_model == PHY_MODEL_MARVELL_E3016) {
+			bmcr |= BMCR_ANENABLE;
+			/* reset the phy in order for settings to stick*/
+			if (phy_reset(dev, bmcr)) {
+				printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+				return -EINVAL;
+			}
+		} else {
+			bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+			mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
+		}
 
 		if (netif_running(dev)) {
 			nv_start_rx(dev);
@@ -3245,7 +3385,7 @@
 	if (!rxtx_ring || !rx_skbuff || !rx_dma || !tx_skbuff || !tx_dma || !tx_dma_len) {
 		/* fall back to old rings */
 		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-			if(rxtx_ring)
+			if (rxtx_ring)
 				pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (ring->rx_pending + ring->tx_pending),
 						    rxtx_ring, ring_addr);
 		} else {
@@ -3418,7 +3558,7 @@
 static u32 nv_get_rx_csum(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
-	return (np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) != 0;
+	return (np->rx_csum) != 0;
 }
 
 static int nv_set_rx_csum(struct net_device *dev, u32 data)
@@ -3428,22 +3568,15 @@
 	int retcode = 0;
 
 	if (np->driver_data & DEV_HAS_CHECKSUM) {
-
-		if (((np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) && data) ||
-		    (!(np->txrxctl_bits & NVREG_TXRXCTL_RXCHECK) && !data)) {
-			/* already set or unset */
-			return 0;
-		}
-
 		if (data) {
+			np->rx_csum = 1;
 			np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
-		} else if (!(np->vlanctl_bits & NVREG_VLANCONTROL_ENABLE)) {
-			np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK;
 		} else {
-			printk(KERN_INFO "Can not disable rx checksum if vlan is enabled\n");
-			return -EINVAL;
+			np->rx_csum = 0;
+			/* vlan is dependent on rx checksum offload */
+			if (!(np->vlanctl_bits & NVREG_VLANCONTROL_ENABLE))
+				np->txrxctl_bits &= ~NVREG_TXRXCTL_RXCHECK;
 		}
-
 		if (netif_running(dev)) {
 			spin_lock_irq(&np->lock);
 			writel(np->txrxctl_bits, base + NvRegTxRxControl);
@@ -3481,7 +3614,7 @@
 	struct fe_priv *np = netdev_priv(dev);
 
 	if (np->driver_data & DEV_HAS_STATISTICS)
-		return (sizeof(struct nv_ethtool_stats)/sizeof(u64));
+		return sizeof(struct nv_ethtool_stats)/sizeof(u64);
 	else
 		return 0;
 }
@@ -3619,7 +3752,7 @@
 	struct sk_buff *tx_skb, *rx_skb;
 	dma_addr_t test_dma_addr;
 	u32 tx_flags_extra = (np->desc_ver == DESC_VER_1 ? NV_TX_LASTPACKET : NV_TX2_LASTPACKET);
-	u32 Flags;
+	u32 flags;
 	int len, i, pkt_len;
 	u8 *pkt_data;
 	u32 filter_flags = 0;
@@ -3663,12 +3796,12 @@
 				       tx_skb->end-tx_skb->data, PCI_DMA_FROMDEVICE);
 
 	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-		np->tx_ring.orig[0].PacketBuffer = cpu_to_le32(test_dma_addr);
-		np->tx_ring.orig[0].FlagLen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra);
+		np->tx_ring.orig[0].buf = cpu_to_le32(test_dma_addr);
+		np->tx_ring.orig[0].flaglen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra);
 	} else {
-		np->tx_ring.ex[0].PacketBufferHigh = cpu_to_le64(test_dma_addr) >> 32;
-		np->tx_ring.ex[0].PacketBufferLow = cpu_to_le64(test_dma_addr) & 0x0FFFFFFFF;
-		np->tx_ring.ex[0].FlagLen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra);
+		np->tx_ring.ex[0].bufhigh = cpu_to_le64(test_dma_addr) >> 32;
+		np->tx_ring.ex[0].buflow = cpu_to_le64(test_dma_addr) & 0x0FFFFFFFF;
+		np->tx_ring.ex[0].flaglen = cpu_to_le32((pkt_len-1) | np->tx_flags | tx_flags_extra);
 	}
 	writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
 	pci_push(get_hwbase(dev));
@@ -3677,21 +3810,21 @@
 
 	/* check for rx of the packet */
 	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
-		Flags = le32_to_cpu(np->rx_ring.orig[0].FlagLen);
+		flags = le32_to_cpu(np->rx_ring.orig[0].flaglen);
 		len = nv_descr_getlength(&np->rx_ring.orig[0], np->desc_ver);
 
 	} else {
-		Flags = le32_to_cpu(np->rx_ring.ex[0].FlagLen);
+		flags = le32_to_cpu(np->rx_ring.ex[0].flaglen);
 		len = nv_descr_getlength_ex(&np->rx_ring.ex[0], np->desc_ver);
 	}
 
-	if (Flags & NV_RX_AVAIL) {
+	if (flags & NV_RX_AVAIL) {
 		ret = 0;
 	} else if (np->desc_ver == DESC_VER_1) {
-		if (Flags & NV_RX_ERROR)
+		if (flags & NV_RX_ERROR)
 			ret = 0;
 	} else {
-		if (Flags & NV_RX2_ERROR) {
+		if (flags & NV_RX2_ERROR) {
 			ret = 0;
 		}
 	}
@@ -3753,6 +3886,7 @@
 	if (test->flags & ETH_TEST_FL_OFFLINE) {
 		if (netif_running(dev)) {
 			netif_stop_queue(dev);
+			netif_poll_disable(dev);
 			netif_tx_lock_bh(dev);
 			spin_lock_irq(&np->lock);
 			nv_disable_hw_interrupts(dev, np->irqmask);
@@ -3811,6 +3945,7 @@
 			nv_start_rx(dev);
 			nv_start_tx(dev);
 			netif_start_queue(dev);
+			netif_poll_enable(dev);
 			nv_enable_hw_interrupts(dev, np->irqmask);
 		}
 	}
@@ -3895,10 +4030,9 @@
 
 	dprintk(KERN_DEBUG "nv_open: begin\n");
 
-	/* 1) erase previous misconfiguration */
+	/* erase previous misconfiguration */
 	if (np->driver_data & DEV_HAS_POWER_CNTRL)
 		nv_mac_reset(dev);
-	/* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
 	writel(0, base + NvRegMulticastAddrB);
 	writel(0, base + NvRegMulticastMaskA);
@@ -3913,26 +4047,22 @@
 	if (np->pause_flags & NV_PAUSEFRAME_TX_CAPABLE)
 		writel(NVREG_TX_PAUSEFRAME_DISABLE,  base + NvRegTxPauseFrame);
 
-	/* 2) initialize descriptor rings */
+	/* initialize descriptor rings */
 	set_bufsize(dev);
 	oom = nv_init_ring(dev);
 
 	writel(0, base + NvRegLinkSpeed);
-	writel(0, base + NvRegUnknownTransmitterReg);
+	writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
 	nv_txrx_reset(dev);
 	writel(0, base + NvRegUnknownSetupReg6);
 
 	np->in_shutdown = 0;
 
-	/* 3) set mac address */
-	nv_copy_mac_to_hw(dev);
-
-	/* 4) give hw rings */
+	/* give hw rings */
 	setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
 	writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 		base + NvRegRingSizes);
 
-	/* 5) continue setup */
 	writel(np->linkspeed, base + NvRegLinkSpeed);
 	if (np->desc_ver == DESC_VER_1)
 		writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
@@ -3950,7 +4080,6 @@
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
 	writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus);
 
-	/* 6) continue setup */
 	writel(NVREG_MISC1_FORCE | NVREG_MISC1_HD, base + NvRegMisc1);
 	writel(readl(base + NvRegTransmitterStatus), base + NvRegTransmitterStatus);
 	writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags);
@@ -4020,6 +4149,8 @@
 	nv_start_rx(dev);
 	nv_start_tx(dev);
 	netif_start_queue(dev);
+	netif_poll_enable(dev);
+
 	if (ret) {
 		netif_carrier_on(dev);
 	} else {
@@ -4049,6 +4180,7 @@
 	spin_lock_irq(&np->lock);
 	np->in_shutdown = 1;
 	spin_unlock_irq(&np->lock);
+	netif_poll_disable(dev);
 	synchronize_irq(dev->irq);
 
 	del_timer_sync(&np->oom_kick);
@@ -4076,12 +4208,6 @@
 	if (np->wolenabled)
 		nv_start_rx(dev);
 
-	/* special op: write back the misordered MAC address - otherwise
-	 * the next nv_probe would see a wrong address.
-	 */
-	writel(np->orig_mac[0], base + NvRegMacAddrA);
-	writel(np->orig_mac[1], base + NvRegMacAddrB);
-
 	/* FIXME: power down nic */
 
 	return 0;
@@ -4094,7 +4220,7 @@
 	unsigned long addr;
 	u8 __iomem *base;
 	int err, i;
-	u32 powerstate;
+	u32 powerstate, txreg;
 
 	dev = alloc_etherdev(sizeof(struct fe_priv));
 	err = -ENOMEM;
@@ -4190,6 +4316,7 @@
 		np->pkt_limit = NV_PKTLIMIT_2;
 
 	if (id->driver_data & DEV_HAS_CHECKSUM) {
+		np->rx_csum = 1;
 		np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
 		dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
 #ifdef NETIF_F_TSO
@@ -4270,6 +4397,10 @@
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = nv_poll_controller;
 #endif
+	dev->weight = 64;
+#ifdef CONFIG_FORCEDETH_NAPI
+	dev->poll = nv_napi_poll;
+#endif
 	SET_ETHTOOL_OPS(dev, &ops);
 	dev->tx_timeout = nv_tx_timeout;
 	dev->watchdog_timeo = NV_WATCHDOG_TIMEO;
@@ -4281,12 +4412,30 @@
 	np->orig_mac[0] = readl(base + NvRegMacAddrA);
 	np->orig_mac[1] = readl(base + NvRegMacAddrB);
 
-	dev->dev_addr[0] = (np->orig_mac[1] >>  8) & 0xff;
-	dev->dev_addr[1] = (np->orig_mac[1] >>  0) & 0xff;
-	dev->dev_addr[2] = (np->orig_mac[0] >> 24) & 0xff;
-	dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff;
-	dev->dev_addr[4] = (np->orig_mac[0] >>  8) & 0xff;
-	dev->dev_addr[5] = (np->orig_mac[0] >>  0) & 0xff;
+	/* check the workaround bit for correct mac address order */
+	txreg = readl(base + NvRegTransmitPoll);
+	if (txreg & NVREG_TRANSMITPOLL_MAC_ADDR_REV) {
+		/* mac address is already in correct order */
+		dev->dev_addr[0] = (np->orig_mac[0] >>  0) & 0xff;
+		dev->dev_addr[1] = (np->orig_mac[0] >>  8) & 0xff;
+		dev->dev_addr[2] = (np->orig_mac[0] >> 16) & 0xff;
+		dev->dev_addr[3] = (np->orig_mac[0] >> 24) & 0xff;
+		dev->dev_addr[4] = (np->orig_mac[1] >>  0) & 0xff;
+		dev->dev_addr[5] = (np->orig_mac[1] >>  8) & 0xff;
+	} else {
+		/* need to reverse mac address to correct order */
+		dev->dev_addr[0] = (np->orig_mac[1] >>  8) & 0xff;
+		dev->dev_addr[1] = (np->orig_mac[1] >>  0) & 0xff;
+		dev->dev_addr[2] = (np->orig_mac[0] >> 24) & 0xff;
+		dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff;
+		dev->dev_addr[4] = (np->orig_mac[0] >>  8) & 0xff;
+		dev->dev_addr[5] = (np->orig_mac[0] >>  0) & 0xff;
+		/* set permanent address to be correct aswell */
+		np->orig_mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) +
+			(dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24);
+		np->orig_mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8);
+		writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+	}
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
 	if (!is_valid_ether_addr(dev->perm_addr)) {
@@ -4309,6 +4458,9 @@
 			dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
 			dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
 
+	/* set mac address */
+	nv_copy_mac_to_hw(dev);
+
 	/* disable WOL */
 	writel(0, base + NvRegWakeUpFlags);
 	np->wolenabled = 0;
@@ -4369,6 +4521,7 @@
 		if (id2 < 0 || id2 == 0xffff)
 			continue;
 
+		np->phy_model = id2 & PHYID2_MODEL_MASK;
 		id1 = (id1 & PHYID1_OUI_MASK) << PHYID1_OUI_SHFT;
 		id2 = (id2 & PHYID2_OUI_MASK) >> PHYID2_OUI_SHFT;
 		dprintk(KERN_DEBUG "%s: open: Found PHY %04x:%04x at address %d.\n",
@@ -4421,9 +4574,17 @@
 static void __devexit nv_remove(struct pci_dev *pci_dev)
 {
 	struct net_device *dev = pci_get_drvdata(pci_dev);
+	struct fe_priv *np = netdev_priv(dev);
+	u8 __iomem *base = get_hwbase(dev);
 
 	unregister_netdev(dev);
 
+	/* special op: write back the misordered MAC address - otherwise
+	 * the next nv_probe would see a wrong address.
+	 */
+	writel(np->orig_mac[0], base + NvRegMacAddrA);
+	writel(np->orig_mac[1], base + NvRegMacAddrB);
+
 	/* free all structures */
 	free_rings(dev);
 	iounmap(get_hwbase(dev));
@@ -4540,7 +4701,7 @@
 static int __init init_nic(void)
 {
 	printk(KERN_INFO "forcedeth.c: Reverse Engineered nForce ethernet driver. Version %s.\n", FORCEDETH_VERSION);
-	return pci_module_init(&driver);
+	return pci_register_driver(&driver);
 }
 
 static void __exit exit_nic(void)
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index e7d9bf3..ff5a67d 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -111,7 +111,6 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/types.h>
-#include <linux/config.h>	/* for CONFIG_PCI */
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 47f6f64..415ba8d 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -45,7 +45,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 0ea65c4..b69776e 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -40,7 +40,6 @@
  ********************************************************************/
 
 #include <linux/module.h>
-#include <linux/config.h> 
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/skbuff.h>
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 82b67af..a51604b 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -110,9 +110,6 @@
 #define IXGB_RXBUFFER_8192  8192
 #define IXGB_RXBUFFER_16384 16384
 
-/* How many Tx Descriptors do we need to call netif_wake_queue? */
-#define IXGB_TX_QUEUE_WAKE 16
-
 /* How many Rx Buffers do we bundle into one write to the hardware ? */
 #define IXGB_RX_BUFFER_WRITE	4	/* Must be power of 2 */
 
@@ -173,7 +170,7 @@
 	unsigned long led_status;
 
 	/* TX */
-	struct ixgb_desc_ring tx_ring;
+	struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
 	unsigned long timeo_start;
 	uint32_t tx_cmd_type;
 	uint64_t hw_csum_tx_good;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index cf19b89..ba62108 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -654,11 +654,7 @@
 
 	mod_timer(&adapter->blink_timer, jiffies);
 
-	if (data)
-		schedule_timeout_interruptible(data * HZ);
-	else
-		schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
-
+	msleep_interruptible(data * 1000);
 	del_timer_sync(&adapter->blink_timer);
 	ixgb_led_off(&adapter->hw);
 	clear_bit(IXGB_LED_ON, &adapter->led_status);
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index f7fa10e..2b15155 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -236,6 +236,17 @@
 		DEBUGOUT("Identified G6104 optics\n");
 		phy_type = ixgb_phy_type_g6104;
 		break;
+	case IXGB_DEVICE_ID_82597EX_CX4:
+		DEBUGOUT("Identified CX4\n");
+		xpak_vendor = ixgb_identify_xpak_vendor(hw);
+		if (xpak_vendor == ixgb_xpak_vendor_intel) {
+			DEBUGOUT("Identified TXN17201 optics\n");
+			phy_type = ixgb_phy_type_txn17201;
+		} else {
+			DEBUGOUT("Identified G6005 optics\n");
+			phy_type = ixgb_phy_type_g6005;
+		}
+		break;
 	default:
 		DEBUGOUT("Unknown physical layer module\n");
 		phy_type = ixgb_phy_type_unknown;
diff --git a/drivers/net/ixgb/ixgb_ids.h b/drivers/net/ixgb/ixgb_ids.h
index 40a085f..9fd6118 100644
--- a/drivers/net/ixgb/ixgb_ids.h
+++ b/drivers/net/ixgb/ixgb_ids.h
@@ -45,6 +45,7 @@
 
 #define IXGB_DEVICE_ID_82597EX_CX4   0x109E
 #define IXGB_SUBDEVICE_ID_A00C  0xA00C
+#define IXGB_SUBDEVICE_ID_A01C  0xA01C
 
 #endif /* #ifndef _IXGB_IDS_H_ */
 /* End of File */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 7bbd447..e36dee1 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -36,7 +36,7 @@
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION		"1.0.109-k2"DRIVERNAPI
+#define DRV_VERSION		"1.0.112-k2"DRIVERNAPI
 char ixgb_driver_version[] = DRV_VERSION;
 static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -118,15 +118,26 @@
 static void ixgb_netpoll(struct net_device *dev);
 #endif
 
-/* Exported from other modules */
+static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
+	                     enum pci_channel_state state);
+static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
+static void ixgb_io_resume (struct pci_dev *pdev);
 
+/* Exported from other modules */
 extern void ixgb_check_options(struct ixgb_adapter *adapter);
 
+static struct pci_error_handlers ixgb_err_handler = {
+	.error_detected = ixgb_io_error_detected,
+	.slot_reset = ixgb_io_slot_reset,
+	.resume = ixgb_io_resume,
+};
+
 static struct pci_driver ixgb_driver = {
 	.name     = ixgb_driver_name,
 	.id_table = ixgb_pci_tbl,
 	.probe    = ixgb_probe,
 	.remove   = __devexit_p(ixgb_remove),
+	.err_handler = &ixgb_err_handler
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -140,12 +151,12 @@
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
 /* some defines for controlling descriptor fetches in h/w */
-#define RXDCTL_WTHRESH_DEFAULT 16	/* chip writes back at this many or RXT0 */
-#define RXDCTL_PTHRESH_DEFAULT 0		/* chip considers prefech below
-						 * this */
-#define RXDCTL_HTHRESH_DEFAULT 0		/* chip will only prefetch if tail
-						 * is pushed this many descriptors
-						 * from head */
+#define RXDCTL_WTHRESH_DEFAULT 15  /* chip writes back at this many or RXT0 */
+#define RXDCTL_PTHRESH_DEFAULT 0   /* chip considers prefech below
+                                    * this */
+#define RXDCTL_HTHRESH_DEFAULT 0   /* chip will only prefetch if tail
+                                    * is pushed this many descriptors
+                                    * from head */
 
 /**
  * ixgb_init_module - Driver Registration Routine
@@ -162,7 +173,7 @@
 
 	printk(KERN_INFO "%s\n", ixgb_copyright);
 
-	return pci_module_init(&ixgb_driver);
+	return pci_register_driver(&ixgb_driver);
 }
 
 module_init(ixgb_init_module);
@@ -1174,6 +1185,7 @@
 	int err;
 
 	if (likely(skb_is_gso(skb))) {
+		struct ixgb_buffer *buffer_info;
 		if (skb_header_cloned(skb)) {
 			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
 			if (err)
@@ -1196,6 +1208,8 @@
 
 		i = adapter->tx_ring.next_to_use;
 		context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
+		buffer_info = &adapter->tx_ring.buffer_info[i];
+		WARN_ON(buffer_info->dma != 0);
 
 		context_desc->ipcss = ipcss;
 		context_desc->ipcso = ipcso;
@@ -1233,11 +1247,14 @@
 	uint8_t css, cso;
 
 	if(likely(skb->ip_summed == CHECKSUM_HW)) {
+		struct ixgb_buffer *buffer_info;
 		css = skb->h.raw - skb->data;
 		cso = (skb->h.raw + skb->csum) - skb->data;
 
 		i = adapter->tx_ring.next_to_use;
 		context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
+		buffer_info = &adapter->tx_ring.buffer_info[i];
+		WARN_ON(buffer_info->dma != 0);
 
 		context_desc->tucss = css;
 		context_desc->tucso = cso;
@@ -1283,6 +1300,7 @@
 		buffer_info = &tx_ring->buffer_info[i];
 		size = min(len, IXGB_MAX_DATA_PER_TXD);
 		buffer_info->length = size;
+		WARN_ON(buffer_info->dma != 0);
 		buffer_info->dma =
 			pci_map_single(adapter->pdev,
 				skb->data + offset,
@@ -1543,6 +1561,11 @@
 ixgb_update_stats(struct ixgb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	/* Prevent stats update while adapter is being reset */
+	if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
+		return;
 
 	if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
 	   (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
@@ -1787,7 +1810,7 @@
 	if (unlikely(netif_queue_stopped(netdev))) {
 		spin_lock(&adapter->tx_lock);
 		if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev) &&
-		    (IXGB_DESC_UNUSED(tx_ring) > IXGB_TX_QUEUE_WAKE))
+		    (IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED))
 			netif_wake_queue(netdev);
 		spin_unlock(&adapter->tx_lock);
 	}
@@ -1948,10 +1971,9 @@
 #define IXGB_CB_LENGTH 256
 		if (length < IXGB_CB_LENGTH) {
 			struct sk_buff *new_skb =
-			    dev_alloc_skb(length + NET_IP_ALIGN);
+			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
 			if (new_skb) {
 				skb_reserve(new_skb, NET_IP_ALIGN);
-				new_skb->dev = netdev;
 				memcpy(new_skb->data - NET_IP_ALIGN,
 				       skb->data - NET_IP_ALIGN,
 				       length + NET_IP_ALIGN);
@@ -2031,14 +2053,14 @@
 	/* leave three descriptors unused */
 	while(--cleancount > 2) {
 		/* recycle! its good for you */
-		if (!(skb = buffer_info->skb))
-			skb = dev_alloc_skb(adapter->rx_buffer_len
-			                    + NET_IP_ALIGN);
-		else {
+		skb = buffer_info->skb;
+		if (skb) {
 			skb_trim(skb, 0);
 			goto map_skb;
 		}
 
+		skb = netdev_alloc_skb(netdev, adapter->rx_buffer_len
+			               + NET_IP_ALIGN);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
@@ -2051,8 +2073,6 @@
 		 */
 		skb_reserve(skb, NET_IP_ALIGN);
 
-		skb->dev = netdev;
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 map_skb:
@@ -2190,7 +2210,7 @@
 
 static void ixgb_netpoll(struct net_device *dev)
 {
-	struct ixgb_adapter *adapter = dev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(dev);
 
 	disable_irq(adapter->pdev->irq);
 	ixgb_intr(adapter->pdev->irq, dev, NULL);
@@ -2198,4 +2218,98 @@
 }
 #endif
 
+/**
+ * ixgb_io_error_detected() - called when PCI error is detected
+ * @pdev    pointer to pci device with error
+ * @state   pci channel state after error
+ *
+ * This callback is called by the PCI subsystem whenever
+ * a PCI bus error is detected.
+ */
+static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
+			             enum pci_channel_state state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgb_adapter *adapter = netdev->priv;
+
+	if(netif_running(netdev))
+		ixgb_down(adapter, TRUE);
+
+	pci_disable_device(pdev);
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev    pointer to pci device with error
+ *
+ * This callback is called after the PCI buss has been reset.
+ * Basically, this tries to restart the card from scratch.
+ * This is a shortened version of the device probe/discovery code,
+ * it resembles the first-half of the ixgb_probe() routine.
+ */
+static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgb_adapter *adapter = netdev->priv;
+
+	if(pci_enable_device(pdev)) {
+		DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	/* Perform card reset only on one instance of the card */
+	if (0 != PCI_FUNC (pdev->devfn))
+		return PCI_ERS_RESULT_RECOVERED;
+
+	pci_set_master(pdev);
+
+	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
+	ixgb_reset(adapter);
+
+	/* Make sure the EEPROM is good */
+	if(!ixgb_validate_eeprom_checksum(&adapter->hw)) {
+		DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+	if(!is_valid_ether_addr(netdev->perm_addr)) {
+		DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * ixgb_io_resume - called when its OK to resume normal operations
+ * @pdev    pointer to pci device with error
+ *
+ * The error recovery driver tells us that its OK to resume
+ * normal operation. Implementation resembles the second-half
+ * of the ixgb_probe() routine.
+ */
+static void ixgb_io_resume (struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct ixgb_adapter *adapter = netdev->priv;
+
+	pci_set_master(pdev);
+
+	if(netif_running(netdev)) {
+		if(ixgb_up(adapter)) {
+			printk ("ixgb: can't bring device back up after reset\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+	mod_timer(&adapter->watchdog_timer, jiffies);
+}
+
 /* ixgb_main.c */
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 9bdd43a..e2346e8 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -187,11 +187,14 @@
 	u8 mac_addr[6];		/* eeprom mac address */
 	unsigned long serial_number;
 	int vendor_specific_offset;
+	int fw_multicast_support;
 	u32 devctl;
 	u16 msi_flags;
 	u32 read_dma;
 	u32 write_dma;
 	u32 read_write_dma;
+	u32 link_changes;
+	u32 msg_enable;
 };
 
 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
@@ -257,6 +260,12 @@
 MODULE_PARM_DESC(myri10ge_max_irq_loops,
 		 "Set stuck legacy IRQ detection threshold\n");
 
+#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
+
+static int myri10ge_debug = -1;	/* defaults above */
+module_param(myri10ge_debug, int, 0);
+MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+
 #define MYRI10GE_FW_OFFSET 1024*1024
 #define MYRI10GE_HIGHPART_TO_U32(X) \
 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -271,7 +280,7 @@
 	struct mcp_cmd *buf;
 	char buf_bytes[sizeof(*buf) + 8];
 	struct mcp_cmd_response *response = mgp->cmd;
-	char __iomem *cmd_addr = mgp->sram + MXGEFW_CMD_OFFSET;
+	char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 	u32 dma_low, dma_high, result, value;
 	int sleep_total = 0;
 
@@ -320,6 +329,8 @@
 		if (result == 0) {
 			data->data0 = value;
 			return 0;
+		} else if (result == MXGEFW_CMD_UNKNOWN) {
+			return -ENOSYS;
 		} else {
 			dev_err(&mgp->pdev->dev,
 				"command %d failed, result = %d\n",
@@ -404,7 +415,7 @@
 	buf[4] = htonl(dma_low);	/* dummy addr LSW */
 	buf[5] = htonl(enable);	/* enable? */
 
-	submit = mgp->sram + 0xfc01c0;
+	submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 
 	myri10ge_pio_copy(submit, &buf, sizeof(buf));
 	for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
@@ -600,7 +611,7 @@
 	buf[5] = htonl(8);	/* where to copy to */
 	buf[6] = htonl(0);	/* where to jump to */
 
-	submit = mgp->sram + 0xfc0000;
+	submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 
 	myri10ge_pio_copy(submit, &buf, sizeof(buf));
 	mb();
@@ -764,6 +775,7 @@
 	mgp->rx_small.cnt = 0;
 	mgp->rx_done.idx = 0;
 	mgp->rx_done.cnt = 0;
+	mgp->link_changes = 0;
 	status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
 	myri10ge_change_promisc(mgp, 0, 0);
 	myri10ge_change_pause(mgp, mgp->pause);
@@ -798,12 +810,13 @@
  * pages directly and building a fraglist in the near future.
  */
 
-static inline struct sk_buff *myri10ge_alloc_big(int bytes)
+static inline struct sk_buff *myri10ge_alloc_big(struct net_device *dev,
+						 int bytes)
 {
 	struct sk_buff *skb;
 	unsigned long data, roundup;
 
-	skb = dev_alloc_skb(bytes + 4096 + MXGEFW_PAD);
+	skb = netdev_alloc_skb(dev, bytes + 4096 + MXGEFW_PAD);
 	if (skb == NULL)
 		return NULL;
 
@@ -821,12 +834,13 @@
 
 /* Allocate 2x as much space as required and use whichever portion
  * does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small_safe(unsigned int bytes)
+static inline struct sk_buff *myri10ge_alloc_small_safe(struct net_device *dev,
+							unsigned int bytes)
 {
 	struct sk_buff *skb;
 	unsigned long data, boundary;
 
-	skb = dev_alloc_skb(2 * (bytes + MXGEFW_PAD) - 1);
+	skb = netdev_alloc_skb(dev, 2 * (bytes + MXGEFW_PAD) - 1);
 	if (unlikely(skb == NULL))
 		return NULL;
 
@@ -847,12 +861,13 @@
 
 /* Allocate just enough space, and verify that the allocated
  * space does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small(int bytes)
+static inline struct sk_buff *myri10ge_alloc_small(struct net_device *dev,
+						   int bytes)
 {
 	struct sk_buff *skb;
 	unsigned long roundup, data, end;
 
-	skb = dev_alloc_skb(bytes + 16 + MXGEFW_PAD);
+	skb = netdev_alloc_skb(dev, bytes + 16 + MXGEFW_PAD);
 	if (unlikely(skb == NULL))
 		return NULL;
 
@@ -868,15 +883,17 @@
 		       "myri10ge_alloc_small: small skb crossed 4KB boundary\n");
 		myri10ge_skb_cross_4k = 1;
 		dev_kfree_skb_any(skb);
-		skb = myri10ge_alloc_small_safe(bytes);
+		skb = myri10ge_alloc_small_safe(dev, bytes);
 	}
 	return skb;
 }
 
 static inline int
-myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct pci_dev *pdev, int bytes,
-		int idx)
+myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct myri10ge_priv *mgp,
+		int bytes, int idx)
 {
+	struct net_device *dev = mgp->dev;
+	struct pci_dev *pdev = mgp->pdev;
 	struct sk_buff *skb;
 	dma_addr_t bus;
 	int len, retval = 0;
@@ -884,11 +901,11 @@
 	bytes += VLAN_HLEN;	/* account for 802.1q vlan tag */
 
 	if ((bytes + MXGEFW_PAD) > (4096 - 16) /* linux overhead */ )
-		skb = myri10ge_alloc_big(bytes);
+		skb = myri10ge_alloc_big(dev, bytes);
 	else if (myri10ge_skb_cross_4k)
-		skb = myri10ge_alloc_small_safe(bytes);
+		skb = myri10ge_alloc_small_safe(dev, bytes);
 	else
-		skb = myri10ge_alloc_small(bytes);
+		skb = myri10ge_alloc_small(dev, bytes);
 
 	if (unlikely(skb == NULL)) {
 		rx->alloc_fail++;
@@ -951,7 +968,7 @@
 	unmap_len = pci_unmap_len(&rx->info[idx], len);
 
 	/* try to replace the received skb */
-	if (myri10ge_getbuf(rx, mgp->pdev, bytes, idx)) {
+	if (myri10ge_getbuf(rx, mgp, bytes, idx)) {
 		/* drop the frame -- the old skbuf is re-cycled */
 		mgp->stats.rx_dropped += 1;
 		return 0;
@@ -968,7 +985,6 @@
 	skb_put(skb, len);
 
 	skb->protocol = eth_type_trans(skb, mgp->dev);
-	skb->dev = mgp->dev;
 	if (mgp->csum_flag) {
 		if ((skb->protocol == ntohs(ETH_P_IP)) ||
 		    (skb->protocol == ntohs(ETH_P_IPV6))) {
@@ -1081,13 +1097,19 @@
 		if (mgp->link_state != stats->link_up) {
 			mgp->link_state = stats->link_up;
 			if (mgp->link_state) {
-				printk(KERN_INFO "myri10ge: %s: link up\n",
-				       mgp->dev->name);
+				if (netif_msg_link(mgp))
+					printk(KERN_INFO
+					       "myri10ge: %s: link up\n",
+					       mgp->dev->name);
 				netif_carrier_on(mgp->dev);
+				mgp->link_changes++;
 			} else {
-				printk(KERN_INFO "myri10ge: %s: link down\n",
-				       mgp->dev->name);
+				if (netif_msg_link(mgp))
+					printk(KERN_INFO
+					       "myri10ge: %s: link down\n",
+					       mgp->dev->name);
 				netif_carrier_off(mgp->dev);
+				mgp->link_changes++;
 			}
 		}
 		if (mgp->rdma_tags_available !=
@@ -1289,7 +1311,8 @@
 	"serial_number", "tx_pkt_start", "tx_pkt_done",
 	"tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
 	"wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
-	"link_up", "dropped_link_overflow", "dropped_link_error_or_filtered",
+	"link_changes", "link_up", "dropped_link_overflow",
+	"dropped_link_error_or_filtered", "dropped_multicast_filtered",
 	"dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
 	"dropped_no_big_buffer"
 };
@@ -1341,16 +1364,31 @@
 	data[i++] = (unsigned int)mgp->stop_queue;
 	data[i++] = (unsigned int)mgp->watchdog_resets;
 	data[i++] = (unsigned int)mgp->tx_linearized;
+	data[i++] = (unsigned int)mgp->link_changes;
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->link_up);
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow);
 	data[i++] =
 	    (unsigned int)ntohl(mgp->fw_stats->dropped_link_error_or_filtered);
+	data[i++] =
+	    (unsigned int)ntohl(mgp->fw_stats->dropped_multicast_filtered);
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_runt);
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_overrun);
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_small_buffer);
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_big_buffer);
 }
 
+static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
+{
+	struct myri10ge_priv *mgp = netdev_priv(netdev);
+	mgp->msg_enable = value;
+}
+
+static u32 myri10ge_get_msglevel(struct net_device *netdev)
+{
+	struct myri10ge_priv *mgp = netdev_priv(netdev);
+	return mgp->msg_enable;
+}
+
 static struct ethtool_ops myri10ge_ethtool_ops = {
 	.get_settings = myri10ge_get_settings,
 	.get_drvinfo = myri10ge_get_drvinfo,
@@ -1371,7 +1409,9 @@
 #endif
 	.get_strings = myri10ge_get_strings,
 	.get_stats_count = myri10ge_get_stats_count,
-	.get_ethtool_stats = myri10ge_get_ethtool_stats
+	.get_ethtool_stats = myri10ge_get_ethtool_stats,
+	.set_msglevel = myri10ge_set_msglevel,
+	.get_msglevel = myri10ge_get_msglevel
 };
 
 static int myri10ge_allocate_rings(struct net_device *dev)
@@ -1439,7 +1479,7 @@
 	/* Fill the receive rings */
 
 	for (i = 0; i <= mgp->rx_small.mask; i++) {
-		status = myri10ge_getbuf(&mgp->rx_small, mgp->pdev,
+		status = myri10ge_getbuf(&mgp->rx_small, mgp,
 					 mgp->small_bytes, i);
 		if (status) {
 			printk(KERN_ERR
@@ -1451,8 +1491,7 @@
 
 	for (i = 0; i <= mgp->rx_big.mask; i++) {
 		status =
-		    myri10ge_getbuf(&mgp->rx_big, mgp->pdev,
-				    dev->mtu + ETH_HLEN, i);
+		    myri10ge_getbuf(&mgp->rx_big, mgp, dev->mtu + ETH_HLEN, i);
 		if (status) {
 			printk(KERN_ERR
 			       "myri10ge: %s: alloced only %d big bufs\n",
@@ -1648,9 +1687,11 @@
 	}
 
 	if (mgp->mtrr >= 0) {
-		mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + 0x200000;
-		mgp->rx_small.wc_fifo = (u8 __iomem *) mgp->sram + 0x300000;
-		mgp->rx_big.wc_fifo = (u8 __iomem *) mgp->sram + 0x340000;
+		mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
+		mgp->rx_small.wc_fifo =
+		    (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
+		mgp->rx_big.wc_fifo =
+		    (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_BIG;
 	} else {
 		mgp->tx.wc_fifo = NULL;
 		mgp->rx_small.wc_fifo = NULL;
@@ -1686,7 +1727,21 @@
 
 	cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->fw_stats_bus);
 	cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->fw_stats_bus);
-	status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA, &cmd, 0);
+	cmd.data2 = sizeof(struct mcp_irq_data);
+	status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
+	if (status == -ENOSYS) {
+		dma_addr_t bus = mgp->fw_stats_bus;
+		bus += offsetof(struct mcp_irq_data, send_done_count);
+		cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
+		cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
+		status = myri10ge_send_cmd(mgp,
+					   MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
+					   &cmd, 0);
+		/* Firmware cannot support multicast without STATS_DMA_V2 */
+		mgp->fw_multicast_support = 0;
+	} else {
+		mgp->fw_multicast_support = 1;
+	}
 	if (status) {
 		printk(KERN_ERR "myri10ge: %s: Couldn't set stats DMA\n",
 		       dev->name);
@@ -1841,7 +1896,8 @@
 	if (cnt > 0) {
 		/* pad it to 64 bytes.  The src is 64 bytes bigger than it
 		 * needs to be so that we don't overrun it */
-		myri10ge_pio_copy(tx->wc_fifo + (cnt << 18), src, 64);
+		myri10ge_pio_copy(tx->wc_fifo + MXGEFW_ETH_SEND_OFFSET(cnt),
+				  src, 64);
 		mb();
 	}
 }
@@ -2140,9 +2196,81 @@
 
 static void myri10ge_set_multicast_list(struct net_device *dev)
 {
+	struct myri10ge_cmd cmd;
+	struct myri10ge_priv *mgp;
+	struct dev_mc_list *mc_list;
+	int err;
+
+	mgp = netdev_priv(dev);
 	/* can be called from atomic contexts,
 	 * pass 1 to force atomicity in myri10ge_send_cmd() */
-	myri10ge_change_promisc(netdev_priv(dev), dev->flags & IFF_PROMISC, 1);
+	myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
+
+	/* This firmware is known to not support multicast */
+	if (!mgp->fw_multicast_support)
+		return;
+
+	/* Disable multicast filtering */
+
+	err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
+	if (err != 0) {
+		printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
+		       " error status: %d\n", dev->name, err);
+		goto abort;
+	}
+
+	if (dev->flags & IFF_ALLMULTI) {
+		/* request to disable multicast filtering, so quit here */
+		return;
+	}
+
+	/* Flush the filters */
+
+	err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+				&cmd, 1);
+	if (err != 0) {
+		printk(KERN_ERR
+		       "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
+		       ", error status: %d\n", dev->name, err);
+		goto abort;
+	}
+
+	/* Walk the multicast list, and add each address */
+	for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
+		memcpy(&cmd.data0, &mc_list->dmi_addr, 4);
+		memcpy(&cmd.data1, ((char *)&mc_list->dmi_addr) + 4, 2);
+		cmd.data0 = htonl(cmd.data0);
+		cmd.data1 = htonl(cmd.data1);
+		err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
+					&cmd, 1);
+
+		if (err != 0) {
+			printk(KERN_ERR "myri10ge: %s: Failed "
+			       "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
+			       "%d\t", dev->name, err);
+			printk(KERN_ERR "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+			       ((unsigned char *)&mc_list->dmi_addr)[0],
+			       ((unsigned char *)&mc_list->dmi_addr)[1],
+			       ((unsigned char *)&mc_list->dmi_addr)[2],
+			       ((unsigned char *)&mc_list->dmi_addr)[3],
+			       ((unsigned char *)&mc_list->dmi_addr)[4],
+			       ((unsigned char *)&mc_list->dmi_addr)[5]
+			    );
+			goto abort;
+		}
+	}
+	/* Enable multicast filtering */
+	err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
+	if (err != 0) {
+		printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
+		       "error status: %d\n", dev->name, err);
+		goto abort;
+	}
+
+	return;
+
+abort:
+	return;
 }
 
 static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
@@ -2581,6 +2709,7 @@
 	mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
 	mgp->pause = myri10ge_flow_control;
 	mgp->intr_coal_delay = myri10ge_intr_coal_delay;
+	mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
 	init_waitqueue_head(&mgp->down_wq);
 
 	if (pci_enable_device(pdev)) {
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index 0a6cae6..9519ae7 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -91,7 +91,19 @@
 
 /* Commands */
 
-#define MXGEFW_CMD_OFFSET 0xf80000
+#define	MXGEFW_BOOT_HANDOFF	0xfc0000
+#define	MXGEFW_BOOT_DUMMY_RDMA	0xfc01c0
+
+#define	MXGEFW_ETH_CMD		0xf80000
+#define	MXGEFW_ETH_SEND_4	0x200000
+#define	MXGEFW_ETH_SEND_1	0x240000
+#define	MXGEFW_ETH_SEND_2	0x280000
+#define	MXGEFW_ETH_SEND_3	0x2c0000
+#define	MXGEFW_ETH_RECV_SMALL	0x300000
+#define	MXGEFW_ETH_RECV_BIG	0x340000
+
+#define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
+#define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
 
 enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_NONE = 0,
@@ -154,7 +166,7 @@
 	MXGEFW_CMD_SET_MTU,
 	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET,	/* in microseconds */
 	MXGEFW_CMD_SET_STATS_INTERVAL,	/* in microseconds */
-	MXGEFW_CMD_SET_STATS_DMA,
+	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,	/* replaced by SET_STATS_DMA_V2 */
 
 	MXGEFW_ENABLE_PROMISC,
 	MXGEFW_DISABLE_PROMISC,
@@ -168,7 +180,26 @@
 	 * data2       = RDMA length (MSH), WDMA length (LSH)
 	 * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
 	 */
-	MXGEFW_DMA_TEST
+	MXGEFW_DMA_TEST,
+
+	MXGEFW_ENABLE_ALLMULTI,
+	MXGEFW_DISABLE_ALLMULTI,
+
+	/* returns MXGEFW_CMD_ERROR_MULTICAST
+	 * if there is no room in the cache
+	 * data0,MSH(data1) = multicast group address */
+	MXGEFW_JOIN_MULTICAST_GROUP,
+	/* returns MXGEFW_CMD_ERROR_MULTICAST
+	 * if the address is not in the cache,
+	 * or is equal to FF-FF-FF-FF-FF-FF
+	 * data0,MSH(data1) = multicast group address */
+	MXGEFW_LEAVE_MULTICAST_GROUP,
+	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+
+	MXGEFW_CMD_SET_STATS_DMA_V2,
+	/* data0, data1 = bus addr,
+	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
+	 * adding new stuff to mcp_irq_data without changing the ABI */
 };
 
 enum myri10ge_mcp_cmd_status {
@@ -180,11 +211,17 @@
 	MXGEFW_CMD_ERROR_CLOSED,
 	MXGEFW_CMD_ERROR_HASH_ERROR,
 	MXGEFW_CMD_ERROR_BAD_PORT,
-	MXGEFW_CMD_ERROR_RESOURCES
+	MXGEFW_CMD_ERROR_RESOURCES,
+	MXGEFW_CMD_ERROR_MULTICAST
 };
 
-/* 40 Bytes */
+#define MXGEFW_OLD_IRQ_DATA_LEN 40
+
 struct mcp_irq_data {
+	/* add new counters at the beginning */
+	u32 future_use[5];
+	u32 dropped_multicast_filtered;
+	/* 40 Bytes */
 	u32 send_done_count;
 
 	u32 link_up;
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index db0475a..9510030 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -3246,7 +3246,7 @@
 	printk(version);
 #endif
 
-	return pci_module_init (&natsemi_driver);
+	return pci_register_driver(&natsemi_driver);
 }
 
 static void __exit natsemi_exit_mod (void)
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 34bdba9..654b477 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -702,7 +702,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init (&ne2k_driver);
+	return pci_register_driver(&ne2k_driver);
 }
 
 
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index b1311ae..30ed9a5 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -17,7 +17,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 0e76859..0dedd34 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -2178,7 +2178,7 @@
 static int __init ns83820_init(void)
 {
 	printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n");
-	return pci_module_init(&driver);
+	return pci_register_driver(&driver);
 }
 
 static void __exit ns83820_exit(void)
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index e0e2939..e634762 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1963,7 +1963,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init (&netdrv_pci_driver);
+	return pci_register_driver(&netdrv_pci_driver);
 }
 
 
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 297e9f8..c54f6a7 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -771,6 +771,7 @@
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
 	PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
+	PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), 
 	PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
 	PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
 	PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
@@ -786,8 +787,6 @@
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058),
 	PCMCIA_DEVICE_PROD_ID14("Network Everywhere", "AX88190", 0x820a67b6,  0xab9be5ef),
-	/* this is not specific enough */
-	/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), */
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, axnet_ids);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 0ecebfc..cc0dcc9 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -654,11 +654,8 @@
     SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 
     if (info->flags & (IS_DL10019|IS_DL10022)) {
-	u_char id = inb(dev->base_addr + 0x1a);
 	dev->do_ioctl = &ei_ioctl;
 	mii_phy_probe(dev);
-	if ((id == 0x30) && !info->pna_phy && (info->eth_phy == 4))
-	    info->eth_phy = 0;
     }
 
     link->dev_node = &info->node;
@@ -821,15 +818,6 @@
     }
 }
 
-static void mdio_reset(kio_addr_t addr, int phy_id)
-{
-    outb_p(0x08, addr);
-    outb_p(0x0c, addr);
-    outb_p(0x08, addr);
-    outb_p(0x0c, addr);
-    outb_p(0x00, addr);
-}
-
 /*======================================================================
 
     EEPROM access routines for DL10019 and DL10022 based cards
@@ -942,7 +930,8 @@
     }
     if (info->flags & IS_DL10022) {
 	if (info->flags & HAS_MII) {
-	    mdio_reset(nic_base + DLINK_GPIO, info->eth_phy);
+	    /* Advertise 100F, 100H, 10F, 10H */
+	    mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
 	    /* Restart MII autonegotiation */
 	    mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
 	    mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index d50bcb8..5e26fe8 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -2978,7 +2978,7 @@
 		tx_start = tx_start_pt;
 
 	/* find the PCI devices */
-	if (!pci_module_init(&pcnet32_driver))
+	if (!pci_register_driver(&pcnet32_driver))
 		pcnet32_have_pci = 1;
 
 	/* should we find any remaining VLbus devices ? */
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 25e31fb..b1d8ed4 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -14,7 +14,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mii.h>
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index ffd215d..792716b 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -12,7 +12,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mii.h>
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
new file mode 100644
index 0000000..c729aee
--- /dev/null
+++ b/drivers/net/qla3xxx.c
@@ -0,0 +1,3537 @@
+/*
+ * QLogic QLA3xxx NIC HBA Driver
+ * Copyright (c)  2003-2006 QLogic Corporation
+ *
+ * See LICENSE.qla3xxx for copyright and licensing details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/dmapool.h>
+#include <linux/mempool.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/ip.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_vlan.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+
+#include "qla3xxx.h"
+
+#define DRV_NAME  	"qla3xxx"
+#define DRV_STRING 	"QLogic ISP3XXX Network Driver"
+#define DRV_VERSION	"v2.02.00-k36"
+#define PFX		DRV_NAME " "
+
+static const char ql3xxx_driver_name[] = DRV_NAME;
+static const char ql3xxx_driver_version[] = DRV_VERSION;
+
+MODULE_AUTHOR("QLogic Corporation");
+MODULE_DESCRIPTION("QLogic ISP3XXX Network Driver " DRV_VERSION " ");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static const u32 default_msg
+    = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
+    | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
+
+static int debug = -1;		/* defaults above */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+static int msi;
+module_param(msi, int, 0);
+MODULE_PARM_DESC(msi, "Turn on Message Signaled Interrupts.");
+
+static struct pci_device_id ql3xxx_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3022_DEVICE_ID)},
+	/* required last entry */
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, ql3xxx_pci_tbl);
+
+/*
+ * Caller must take hw_lock.
+ */
+static int ql_sem_spinlock(struct ql3_adapter *qdev,
+			    u32 sem_mask, u32 sem_bits)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	u32 value;
+	unsigned int seconds = 3;
+
+	do {
+		writel((sem_mask | sem_bits),
+		       &port_regs->CommonRegs.semaphoreReg);
+		value = readl(&port_regs->CommonRegs.semaphoreReg);
+		if ((value & (sem_mask >> 16)) == sem_bits)
+			return 0;
+		ssleep(1);
+	} while(--seconds);
+	return -1;
+}
+
+static void ql_sem_unlock(struct ql3_adapter *qdev, u32 sem_mask)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	writel(sem_mask, &port_regs->CommonRegs.semaphoreReg);
+	readl(&port_regs->CommonRegs.semaphoreReg);
+}
+
+static int ql_sem_lock(struct ql3_adapter *qdev, u32 sem_mask, u32 sem_bits)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	u32 value;
+
+	writel((sem_mask | sem_bits), &port_regs->CommonRegs.semaphoreReg);
+	value = readl(&port_regs->CommonRegs.semaphoreReg);
+	return ((value & (sem_mask >> 16)) == sem_bits);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_wait_for_drvr_lock(struct ql3_adapter *qdev)
+{
+	int i = 0;
+
+	while (1) {
+		if (!ql_sem_lock(qdev,
+				 QL_DRVR_SEM_MASK,
+				 (QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index)
+				  * 2) << 1)) {
+			if (i < 10) {
+				ssleep(1);
+				i++;
+			} else {
+				printk(KERN_ERR PFX "%s: Timed out waiting for "
+				       "driver lock...\n",
+				       qdev->ndev->name);
+				return 0;
+			}
+		} else {
+			printk(KERN_DEBUG PFX
+			       "%s: driver lock acquired.\n",
+			       qdev->ndev->name);
+			return 1;
+		}
+	}
+}
+
+static void ql_set_register_page(struct ql3_adapter *qdev, u32 page)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+
+	writel(((ISP_CONTROL_NP_MASK << 16) | page),
+			&port_regs->CommonRegs.ispControlStatus);
+	readl(&port_regs->CommonRegs.ispControlStatus);
+	qdev->current_page = page;
+}
+
+static u32 ql_read_common_reg_l(struct ql3_adapter *qdev,
+			      u32 __iomem * reg)
+{
+	u32 value;
+	unsigned long hw_flags;
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	value = readl(reg);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+	return value;
+}
+
+static u32 ql_read_common_reg(struct ql3_adapter *qdev,
+			      u32 __iomem * reg)
+{
+	return readl(reg);
+}
+
+static u32 ql_read_page0_reg_l(struct ql3_adapter *qdev, u32 __iomem *reg)
+{
+	u32 value;
+	unsigned long hw_flags;
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+
+	if (qdev->current_page != 0)
+		ql_set_register_page(qdev,0);
+	value = readl(reg);
+
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return value;
+}
+
+static u32 ql_read_page0_reg(struct ql3_adapter *qdev, u32 __iomem *reg)
+{
+	if (qdev->current_page != 0)
+		ql_set_register_page(qdev,0);
+	return readl(reg);
+}
+
+static void ql_write_common_reg_l(struct ql3_adapter *qdev,
+				u32 * reg, u32 value)
+{
+	unsigned long hw_flags;
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	writel(value, (u32 *) reg);
+	readl(reg);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return;
+}
+
+static void ql_write_common_reg(struct ql3_adapter *qdev,
+				u32 * reg, u32 value)
+{
+	writel(value, (u32 *) reg);
+	readl(reg);
+	return;
+}
+
+static void ql_write_page0_reg(struct ql3_adapter *qdev,
+			       u32 * reg, u32 value)
+{
+	if (qdev->current_page != 0)
+		ql_set_register_page(qdev,0);
+	writel(value, (u32 *) reg);
+	readl(reg);
+	return;
+}
+
+/*
+ * Caller holds hw_lock. Only called during init.
+ */
+static void ql_write_page1_reg(struct ql3_adapter *qdev,
+			       u32 * reg, u32 value)
+{
+	if (qdev->current_page != 1)
+		ql_set_register_page(qdev,1);
+	writel(value, (u32 *) reg);
+	readl(reg);
+	return;
+}
+
+/*
+ * Caller holds hw_lock. Only called during init.
+ */
+static void ql_write_page2_reg(struct ql3_adapter *qdev,
+			       u32 * reg, u32 value)
+{
+	if (qdev->current_page != 2)
+		ql_set_register_page(qdev,2);
+	writel(value, (u32 *) reg);
+	readl(reg);
+	return;
+}
+
+static void ql_disable_interrupts(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+
+	ql_write_common_reg_l(qdev, &port_regs->CommonRegs.ispInterruptMaskReg,
+			    (ISP_IMR_ENABLE_INT << 16));
+
+}
+
+static void ql_enable_interrupts(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+
+	ql_write_common_reg_l(qdev, &port_regs->CommonRegs.ispInterruptMaskReg,
+			    ((0xff << 16) | ISP_IMR_ENABLE_INT));
+
+}
+
+static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
+					    struct ql_rcv_buf_cb *lrg_buf_cb)
+{
+	u64 map;
+	lrg_buf_cb->next = NULL;
+
+	if (qdev->lrg_buf_free_tail == NULL) {	/* The list is empty  */
+		qdev->lrg_buf_free_head = qdev->lrg_buf_free_tail = lrg_buf_cb;
+	} else {
+		qdev->lrg_buf_free_tail->next = lrg_buf_cb;
+		qdev->lrg_buf_free_tail = lrg_buf_cb;
+	}
+
+	if (!lrg_buf_cb->skb) {
+		lrg_buf_cb->skb = dev_alloc_skb(qdev->lrg_buffer_len);
+		if (unlikely(!lrg_buf_cb->skb)) {
+			printk(KERN_ERR PFX "%s: failed dev_alloc_skb().\n",
+			       qdev->ndev->name);
+			qdev->lrg_buf_skb_check++;
+		} else {
+			/*
+			 * We save some space to copy the ethhdr from first
+			 * buffer
+			 */
+			skb_reserve(lrg_buf_cb->skb, QL_HEADER_SPACE);
+			map = pci_map_single(qdev->pdev,
+					     lrg_buf_cb->skb->data,
+					     qdev->lrg_buffer_len -
+					     QL_HEADER_SPACE,
+					     PCI_DMA_FROMDEVICE);
+			lrg_buf_cb->buf_phy_addr_low =
+			    cpu_to_le32(LS_64BITS(map));
+			lrg_buf_cb->buf_phy_addr_high =
+			    cpu_to_le32(MS_64BITS(map));
+			pci_unmap_addr_set(lrg_buf_cb, mapaddr, map);
+			pci_unmap_len_set(lrg_buf_cb, maplen,
+					  qdev->lrg_buffer_len -
+					  QL_HEADER_SPACE);
+		}
+	}
+
+	qdev->lrg_buf_free_count++;
+}
+
+static struct ql_rcv_buf_cb *ql_get_from_lrg_buf_free_list(struct ql3_adapter
+							   *qdev)
+{
+	struct ql_rcv_buf_cb *lrg_buf_cb;
+
+	if ((lrg_buf_cb = qdev->lrg_buf_free_head) != NULL) {
+		if ((qdev->lrg_buf_free_head = lrg_buf_cb->next) == NULL)
+			qdev->lrg_buf_free_tail = NULL;
+		qdev->lrg_buf_free_count--;
+	}
+
+	return lrg_buf_cb;
+}
+
+static u32 addrBits = EEPROM_NO_ADDR_BITS;
+static u32 dataBits = EEPROM_NO_DATA_BITS;
+
+static void fm93c56a_deselect(struct ql3_adapter *qdev);
+static void eeprom_readword(struct ql3_adapter *qdev, u32 eepromAddr,
+			    unsigned short *value);
+
+/*
+ * Caller holds hw_lock.
+ */
+static void fm93c56a_select(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_1;
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void fm93c56a_cmd(struct ql3_adapter *qdev, u32 cmd, u32 eepromAddr)
+{
+	int i;
+	u32 mask;
+	u32 dataBit;
+	u32 previousBit;
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	/* Clock in a zero, then do the start bit */
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
+			    AUBURN_EEPROM_DO_1);
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    ISP_NVRAM_MASK | qdev->
+			    eeprom_cmd_data | AUBURN_EEPROM_DO_1 |
+			    AUBURN_EEPROM_CLK_RISE);
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    ISP_NVRAM_MASK | qdev->
+			    eeprom_cmd_data | AUBURN_EEPROM_DO_1 |
+			    AUBURN_EEPROM_CLK_FALL);
+
+	mask = 1 << (FM93C56A_CMD_BITS - 1);
+	/* Force the previous data bit to be different */
+	previousBit = 0xffff;
+	for (i = 0; i < FM93C56A_CMD_BITS; i++) {
+		dataBit =
+		    (cmd & mask) ? AUBURN_EEPROM_DO_1 : AUBURN_EEPROM_DO_0;
+		if (previousBit != dataBit) {
+			/*
+			 * If the bit changed, then change the DO state to
+			 * match
+			 */
+			ql_write_common_reg(qdev,
+					    &port_regs->CommonRegs.
+					    serialPortInterfaceReg,
+					    ISP_NVRAM_MASK | qdev->
+					    eeprom_cmd_data | dataBit);
+			previousBit = dataBit;
+		}
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    serialPortInterfaceReg,
+				    ISP_NVRAM_MASK | qdev->
+				    eeprom_cmd_data | dataBit |
+				    AUBURN_EEPROM_CLK_RISE);
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    serialPortInterfaceReg,
+				    ISP_NVRAM_MASK | qdev->
+				    eeprom_cmd_data | dataBit |
+				    AUBURN_EEPROM_CLK_FALL);
+		cmd = cmd << 1;
+	}
+
+	mask = 1 << (addrBits - 1);
+	/* Force the previous data bit to be different */
+	previousBit = 0xffff;
+	for (i = 0; i < addrBits; i++) {
+		dataBit =
+		    (eepromAddr & mask) ? AUBURN_EEPROM_DO_1 :
+		    AUBURN_EEPROM_DO_0;
+		if (previousBit != dataBit) {
+			/*
+			 * If the bit changed, then change the DO state to
+			 * match
+			 */
+			ql_write_common_reg(qdev,
+					    &port_regs->CommonRegs.
+					    serialPortInterfaceReg,
+					    ISP_NVRAM_MASK | qdev->
+					    eeprom_cmd_data | dataBit);
+			previousBit = dataBit;
+		}
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    serialPortInterfaceReg,
+				    ISP_NVRAM_MASK | qdev->
+				    eeprom_cmd_data | dataBit |
+				    AUBURN_EEPROM_CLK_RISE);
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    serialPortInterfaceReg,
+				    ISP_NVRAM_MASK | qdev->
+				    eeprom_cmd_data | dataBit |
+				    AUBURN_EEPROM_CLK_FALL);
+		eepromAddr = eepromAddr << 1;
+	}
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void fm93c56a_deselect(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_0;
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void fm93c56a_datain(struct ql3_adapter *qdev, unsigned short *value)
+{
+	int i;
+	u32 data = 0;
+	u32 dataBit;
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	/* Read the data bits */
+	/* The first bit is a dummy.  Clock right over it. */
+	for (i = 0; i < dataBits; i++) {
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    serialPortInterfaceReg,
+				    ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
+				    AUBURN_EEPROM_CLK_RISE);
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    serialPortInterfaceReg,
+				    ISP_NVRAM_MASK | qdev->eeprom_cmd_data |
+				    AUBURN_EEPROM_CLK_FALL);
+		dataBit =
+		    (ql_read_common_reg
+		     (qdev,
+		      &port_regs->CommonRegs.
+		      serialPortInterfaceReg) & AUBURN_EEPROM_DI_1) ? 1 : 0;
+		data = (data << 1) | dataBit;
+	}
+	*value = (u16) data;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void eeprom_readword(struct ql3_adapter *qdev,
+			    u32 eepromAddr, unsigned short *value)
+{
+	fm93c56a_select(qdev);
+	fm93c56a_cmd(qdev, (int)FM93C56A_READ, eepromAddr);
+	fm93c56a_datain(qdev, value);
+	fm93c56a_deselect(qdev);
+}
+
+static void ql_swap_mac_addr(u8 * macAddress)
+{
+#ifdef __BIG_ENDIAN
+	u8 temp;
+	temp = macAddress[0];
+	macAddress[0] = macAddress[1];
+	macAddress[1] = temp;
+	temp = macAddress[2];
+	macAddress[2] = macAddress[3];
+	macAddress[3] = temp;
+	temp = macAddress[4];
+	macAddress[4] = macAddress[5];
+	macAddress[5] = temp;
+#endif
+}
+
+static int ql_get_nvram_params(struct ql3_adapter *qdev)
+{
+	u16 *pEEPROMData;
+	u16 checksum = 0;
+	u32 index;
+	unsigned long hw_flags;
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+
+	pEEPROMData = (u16 *) & qdev->nvram_data;
+	qdev->eeprom_cmd_data = 0;
+	if(ql_sem_spinlock(qdev, QL_NVRAM_SEM_MASK,
+			(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 10)) {
+		printk(KERN_ERR PFX"%s: Failed ql_sem_spinlock().\n",
+			__func__);
+		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+		return -1;
+	}
+
+	for (index = 0; index < EEPROM_SIZE; index++) {
+		eeprom_readword(qdev, index, pEEPROMData);
+		checksum += *pEEPROMData;
+		pEEPROMData++;
+	}
+	ql_sem_unlock(qdev, QL_NVRAM_SEM_MASK);
+
+	if (checksum != 0) {
+		printk(KERN_ERR PFX "%s: checksum should be zero, is %x!!\n",
+		       qdev->ndev->name, checksum);
+		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+		return -1;
+	}
+
+	/*
+	 * We have a problem with endianness for the MAC addresses
+	 * and the two 8-bit values version, and numPorts.  We
+	 * have to swap them on big endian systems.
+	 */
+	ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn0.macAddress);
+	ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn1.macAddress);
+	ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn2.macAddress);
+	ql_swap_mac_addr(qdev->nvram_data.funcCfg_fn3.macAddress);
+	pEEPROMData = (u16 *) & qdev->nvram_data.version;
+	*pEEPROMData = le16_to_cpu(*pEEPROMData);
+
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return checksum;
+}
+
+static const u32 PHYAddr[2] = {
+	PORT0_PHY_ADDRESS, PORT1_PHY_ADDRESS
+};
+
+static int ql_wait_for_mii_ready(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 temp;
+	int count = 1000;
+
+	while (count) {
+		temp = ql_read_page0_reg(qdev, &port_regs->macMIIStatusReg);
+		if (!(temp & MAC_MII_STATUS_BSY))
+			return 0;
+		udelay(10);
+		count--;
+	}
+	return -1;
+}
+
+static void ql_mii_enable_scan_mode(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 scanControl;
+
+	if (qdev->numPorts > 1) {
+		/* Auto scan will cycle through multiple ports */
+		scanControl = MAC_MII_CONTROL_AS | MAC_MII_CONTROL_SC;
+	} else {
+		scanControl = MAC_MII_CONTROL_SC;
+	}
+
+	/*
+	 * Scan register 1 of PHY/PETBI,
+	 * Set up to scan both devices
+	 * The autoscan starts from the first register, completes
+	 * the last one before rolling over to the first
+	 */
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
+			   PHYAddr[0] | MII_SCAN_REGISTER);
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   (scanControl) |
+			   ((MAC_MII_CONTROL_SC | MAC_MII_CONTROL_AS) << 16));
+}
+
+static u8 ql_mii_disable_scan_mode(struct ql3_adapter *qdev)
+{
+	u8 ret;
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    				qdev->mem_map_registers;
+
+	/* See if scan mode is enabled before we turn it off */
+	if (ql_read_page0_reg(qdev, &port_regs->macMIIMgmtControlReg) &
+	    (MAC_MII_CONTROL_AS | MAC_MII_CONTROL_SC)) {
+		/* Scan is enabled */
+		ret = 1;
+	} else {
+		/* Scan is disabled */
+		ret = 0;
+	}
+
+	/*
+	 * When disabling scan mode you must first change the MII register
+	 * address
+	 */
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
+			   PHYAddr[0] | MII_SCAN_REGISTER);
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   ((MAC_MII_CONTROL_SC | MAC_MII_CONTROL_AS |
+			     MAC_MII_CONTROL_RC) << 16));
+
+	return ret;
+}
+
+static int ql_mii_write_reg_ex(struct ql3_adapter *qdev,
+			       u16 regAddr, u16 value, u32 mac_index)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u8 scanWasEnabled;
+
+	scanWasEnabled = ql_mii_disable_scan_mode(qdev);
+
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s Timed out waiting for management port to "
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
+			   PHYAddr[mac_index] | regAddr);
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtDataReg, value);
+
+	/* Wait for write to complete 9/10/04 SJP */
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to"
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	if (scanWasEnabled)
+		ql_mii_enable_scan_mode(qdev);
+
+	return 0;
+}
+
+static int ql_mii_read_reg_ex(struct ql3_adapter *qdev, u16 regAddr,
+			      u16 * value, u32 mac_index)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u8 scanWasEnabled;
+	u32 temp;
+
+	scanWasEnabled = ql_mii_disable_scan_mode(qdev);
+
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to "
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
+			   PHYAddr[mac_index] | regAddr);
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   (MAC_MII_CONTROL_RC << 16));
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   (MAC_MII_CONTROL_RC << 16) | MAC_MII_CONTROL_RC);
+
+	/* Wait for the read to complete */
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to "
+			       "get free after issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	temp = ql_read_page0_reg(qdev, &port_regs->macMIIMgmtDataReg);
+	*value = (u16) temp;
+
+	if (scanWasEnabled)
+		ql_mii_enable_scan_mode(qdev);
+
+	return 0;
+}
+
+static int ql_mii_write_reg(struct ql3_adapter *qdev, u16 regAddr, u16 value)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	ql_mii_disable_scan_mode(qdev);
+
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to "
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
+			   qdev->PHYAddr | regAddr);
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtDataReg, value);
+
+	/* Wait for write to complete. */
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to "
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	ql_mii_enable_scan_mode(qdev);
+
+	return 0;
+}
+
+static int ql_mii_read_reg(struct ql3_adapter *qdev, u16 regAddr, u16 *value)
+{
+	u32 temp;
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	ql_mii_disable_scan_mode(qdev);
+
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to "
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtAddrReg,
+			   qdev->PHYAddr | regAddr);
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   (MAC_MII_CONTROL_RC << 16));
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   (MAC_MII_CONTROL_RC << 16) | MAC_MII_CONTROL_RC);
+
+	/* Wait for the read to complete */
+	if (ql_wait_for_mii_ready(qdev)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Timed out waiting for management port to "
+			       "get free before issuing command.\n",
+			       qdev->ndev->name);
+		return -1;
+	}
+
+	temp = ql_read_page0_reg(qdev, &port_regs->macMIIMgmtDataReg);
+	*value = (u16) temp;
+
+	ql_mii_enable_scan_mode(qdev);
+
+	return 0;
+}
+
+static void ql_petbi_reset(struct ql3_adapter *qdev)
+{
+	ql_mii_write_reg(qdev, PETBI_CONTROL_REG, PETBI_CTRL_SOFT_RESET);
+}
+
+static void ql_petbi_start_neg(struct ql3_adapter *qdev)
+{
+	u16 reg;
+
+	/* Enable Auto-negotiation sense */
+	ql_mii_read_reg(qdev, PETBI_TBI_CTRL, &reg);
+	reg |= PETBI_TBI_AUTO_SENSE;
+	ql_mii_write_reg(qdev, PETBI_TBI_CTRL, reg);
+
+	ql_mii_write_reg(qdev, PETBI_NEG_ADVER,
+			 PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX);
+
+	ql_mii_write_reg(qdev, PETBI_CONTROL_REG,
+			 PETBI_CTRL_AUTO_NEG | PETBI_CTRL_RESTART_NEG |
+			 PETBI_CTRL_FULL_DUPLEX | PETBI_CTRL_SPEED_1000);
+
+}
+
+static void ql_petbi_reset_ex(struct ql3_adapter *qdev, u32 mac_index)
+{
+	ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG, PETBI_CTRL_SOFT_RESET,
+			    mac_index);
+}
+
+static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev, u32 mac_index)
+{
+	u16 reg;
+
+	/* Enable Auto-negotiation sense */
+	ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg, mac_index);
+	reg |= PETBI_TBI_AUTO_SENSE;
+	ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg, mac_index);
+
+	ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER,
+			    PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX, mac_index);
+
+	ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG,
+			    PETBI_CTRL_AUTO_NEG | PETBI_CTRL_RESTART_NEG |
+			    PETBI_CTRL_FULL_DUPLEX | PETBI_CTRL_SPEED_1000,
+			    mac_index);
+}
+
+static void ql_petbi_init(struct ql3_adapter *qdev)
+{
+	ql_petbi_reset(qdev);
+	ql_petbi_start_neg(qdev);
+}
+
+static void ql_petbi_init_ex(struct ql3_adapter *qdev, u32 mac_index)
+{
+	ql_petbi_reset_ex(qdev, mac_index);
+	ql_petbi_start_neg_ex(qdev, mac_index);
+}
+
+static int ql_is_petbi_neg_pause(struct ql3_adapter *qdev)
+{
+	u16 reg;
+
+	if (ql_mii_read_reg(qdev, PETBI_NEG_PARTNER, &reg) < 0)
+		return 0;
+
+	return (reg & PETBI_NEG_PAUSE_MASK) == PETBI_NEG_PAUSE;
+}
+
+static int ql_phy_get_speed(struct ql3_adapter *qdev)
+{
+	u16 reg;
+
+	if (ql_mii_read_reg(qdev, AUX_CONTROL_STATUS, &reg) < 0)
+		return 0;
+
+	reg = (((reg & 0x18) >> 3) & 3);
+
+	if (reg == 2)
+		return SPEED_1000;
+	else if (reg == 1)
+		return SPEED_100;
+	else if (reg == 0)
+		return SPEED_10;
+	else
+		return -1;
+}
+
+static int ql_is_full_dup(struct ql3_adapter *qdev)
+{
+	u16 reg;
+
+	if (ql_mii_read_reg(qdev, AUX_CONTROL_STATUS, &reg) < 0)
+		return 0;
+
+	return (reg & PHY_AUX_DUPLEX_STAT) != 0;
+}
+
+static int ql_is_phy_neg_pause(struct ql3_adapter *qdev)
+{
+	u16 reg;
+
+	if (ql_mii_read_reg(qdev, PHY_NEG_PARTNER, &reg) < 0)
+		return 0;
+
+	return (reg & PHY_NEG_PAUSE) != 0;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_mac_enable(struct ql3_adapter *qdev, u32 enable)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 value;
+
+	if (enable)
+		value = (MAC_CONFIG_REG_PE | (MAC_CONFIG_REG_PE << 16));
+	else
+		value = (MAC_CONFIG_REG_PE << 16);
+
+	if (qdev->mac_index)
+		ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
+	else
+		ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_mac_cfg_soft_reset(struct ql3_adapter *qdev, u32 enable)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 value;
+
+	if (enable)
+		value = (MAC_CONFIG_REG_SR | (MAC_CONFIG_REG_SR << 16));
+	else
+		value = (MAC_CONFIG_REG_SR << 16);
+
+	if (qdev->mac_index)
+		ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
+	else
+		ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_mac_cfg_gig(struct ql3_adapter *qdev, u32 enable)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 value;
+
+	if (enable)
+		value = (MAC_CONFIG_REG_GM | (MAC_CONFIG_REG_GM << 16));
+	else
+		value = (MAC_CONFIG_REG_GM << 16);
+
+	if (qdev->mac_index)
+		ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
+	else
+		ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_mac_cfg_full_dup(struct ql3_adapter *qdev, u32 enable)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 value;
+
+	if (enable)
+		value = (MAC_CONFIG_REG_FD | (MAC_CONFIG_REG_FD << 16));
+	else
+		value = (MAC_CONFIG_REG_FD << 16);
+
+	if (qdev->mac_index)
+		ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
+	else
+		ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_mac_cfg_pause(struct ql3_adapter *qdev, u32 enable)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 value;
+
+	if (enable)
+		value =
+		    ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) |
+		     ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16));
+	else
+		value = ((MAC_CONFIG_REG_TF | MAC_CONFIG_REG_RF) << 16);
+
+	if (qdev->mac_index)
+		ql_write_page0_reg(qdev, &port_regs->mac1ConfigReg, value);
+	else
+		ql_write_page0_reg(qdev, &port_regs->mac0ConfigReg, value);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_is_fiber(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 bitToCheck = 0;
+	u32 temp;
+
+	switch (qdev->mac_index) {
+	case 0:
+		bitToCheck = PORT_STATUS_SM0;
+		break;
+	case 1:
+		bitToCheck = PORT_STATUS_SM1;
+		break;
+	}
+
+	temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	return (temp & bitToCheck) != 0;
+}
+
+static int ql_is_auto_cfg(struct ql3_adapter *qdev)
+{
+	u16 reg;
+	ql_mii_read_reg(qdev, 0x00, &reg);
+	return (reg & 0x1000) != 0;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_is_auto_neg_complete(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 bitToCheck = 0;
+	u32 temp;
+
+	switch (qdev->mac_index) {
+	case 0:
+		bitToCheck = PORT_STATUS_AC0;
+		break;
+	case 1:
+		bitToCheck = PORT_STATUS_AC1;
+		break;
+	}
+
+	temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	if (temp & bitToCheck) {
+		if (netif_msg_link(qdev))
+			printk(KERN_INFO PFX
+			       "%s: Auto-Negotiate complete.\n",
+			       qdev->ndev->name);
+		return 1;
+	} else {
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Auto-Negotiate incomplete.\n",
+			       qdev->ndev->name);
+		return 0;
+	}
+}
+
+/*
+ *  ql_is_neg_pause() returns 1 if pause was negotiated to be on
+ */
+static int ql_is_neg_pause(struct ql3_adapter *qdev)
+{
+	if (ql_is_fiber(qdev))
+		return ql_is_petbi_neg_pause(qdev);
+	else
+		return ql_is_phy_neg_pause(qdev);
+}
+
+static int ql_auto_neg_error(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 bitToCheck = 0;
+	u32 temp;
+
+	switch (qdev->mac_index) {
+	case 0:
+		bitToCheck = PORT_STATUS_AE0;
+		break;
+	case 1:
+		bitToCheck = PORT_STATUS_AE1;
+		break;
+	}
+	temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	return (temp & bitToCheck) != 0;
+}
+
+static u32 ql_get_link_speed(struct ql3_adapter *qdev)
+{
+	if (ql_is_fiber(qdev))
+		return SPEED_1000;
+	else
+		return ql_phy_get_speed(qdev);
+}
+
+static int ql_is_link_full_dup(struct ql3_adapter *qdev)
+{
+	if (ql_is_fiber(qdev))
+		return 1;
+	else
+		return ql_is_full_dup(qdev);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_link_down_detect(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 bitToCheck = 0;
+	u32 temp;
+
+	switch (qdev->mac_index) {
+	case 0:
+		bitToCheck = ISP_CONTROL_LINK_DN_0;
+		break;
+	case 1:
+		bitToCheck = ISP_CONTROL_LINK_DN_1;
+		break;
+	}
+
+	temp =
+	    ql_read_common_reg(qdev, &port_regs->CommonRegs.ispControlStatus);
+	return (temp & bitToCheck) != 0;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_link_down_detect_clear(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	switch (qdev->mac_index) {
+	case 0:
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.ispControlStatus,
+				    (ISP_CONTROL_LINK_DN_0) |
+				    (ISP_CONTROL_LINK_DN_0 << 16));
+		break;
+
+	case 1:
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.ispControlStatus,
+				    (ISP_CONTROL_LINK_DN_1) |
+				    (ISP_CONTROL_LINK_DN_1 << 16));
+		break;
+
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_this_adapter_controls_port(struct ql3_adapter *qdev,
+					 u32 mac_index)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 bitToCheck = 0;
+	u32 temp;
+
+	switch (mac_index) {
+	case 0:
+		bitToCheck = PORT_STATUS_F1_ENABLED;
+		break;
+	case 1:
+		bitToCheck = PORT_STATUS_F3_ENABLED;
+		break;
+	default:
+		break;
+	}
+
+	temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	if (temp & bitToCheck) {
+		if (netif_msg_link(qdev))
+			printk(KERN_DEBUG PFX
+			       "%s: is not link master.\n", qdev->ndev->name);
+		return 0;
+	} else {
+		if (netif_msg_link(qdev))
+			printk(KERN_DEBUG PFX
+			       "%s: is link master.\n", qdev->ndev->name);
+		return 1;
+	}
+}
+
+static void ql_phy_reset_ex(struct ql3_adapter *qdev, u32 mac_index)
+{
+	ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET, mac_index);
+}
+
+static void ql_phy_start_neg_ex(struct ql3_adapter *qdev, u32 mac_index)
+{
+	u16 reg;
+
+	ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER,
+			    PHY_NEG_PAUSE | PHY_NEG_ADV_SPEED | 1, mac_index);
+
+	ql_mii_read_reg_ex(qdev, CONTROL_REG, &reg, mac_index);
+	ql_mii_write_reg_ex(qdev, CONTROL_REG, reg | PHY_CTRL_RESTART_NEG,
+			    mac_index);
+}
+
+static void ql_phy_init_ex(struct ql3_adapter *qdev, u32 mac_index)
+{
+	ql_phy_reset_ex(qdev, mac_index);
+	ql_phy_start_neg_ex(qdev, mac_index);
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static u32 ql_get_link_state(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	u32 bitToCheck = 0;
+	u32 temp, linkState;
+
+	switch (qdev->mac_index) {
+	case 0:
+		bitToCheck = PORT_STATUS_UP0;
+		break;
+	case 1:
+		bitToCheck = PORT_STATUS_UP1;
+		break;
+	}
+	temp = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	if (temp & bitToCheck) {
+		linkState = LS_UP;
+	} else {
+		linkState = LS_DOWN;
+		if (netif_msg_link(qdev))
+			printk(KERN_WARNING PFX
+			       "%s: Link is down.\n", qdev->ndev->name);
+	}
+	return linkState;
+}
+
+static int ql_port_start(struct ql3_adapter *qdev)
+{
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+		(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7))
+		return -1;
+
+	if (ql_is_fiber(qdev)) {
+		ql_petbi_init(qdev);
+	} else {
+		/* Copper port */
+		ql_phy_init_ex(qdev, qdev->mac_index);
+	}
+
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+	return 0;
+}
+
+static int ql_finish_auto_neg(struct ql3_adapter *qdev)
+{
+
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+		(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7))
+		return -1;
+
+	if (!ql_auto_neg_error(qdev)) {
+		if (test_bit(QL_LINK_MASTER,&qdev->flags)) {
+			/* configure the MAC */
+			if (netif_msg_link(qdev))
+				printk(KERN_DEBUG PFX
+				       "%s: Configuring link.\n",
+				       qdev->ndev->
+				       name);
+			ql_mac_cfg_soft_reset(qdev, 1);
+			ql_mac_cfg_gig(qdev,
+				       (ql_get_link_speed
+					(qdev) ==
+					SPEED_1000));
+			ql_mac_cfg_full_dup(qdev,
+					    ql_is_link_full_dup
+					    (qdev));
+			ql_mac_cfg_pause(qdev,
+					 ql_is_neg_pause
+					 (qdev));
+			ql_mac_cfg_soft_reset(qdev, 0);
+
+			/* enable the MAC */
+			if (netif_msg_link(qdev))
+				printk(KERN_DEBUG PFX
+				       "%s: Enabling mac.\n",
+				       qdev->ndev->
+					       name);
+			ql_mac_enable(qdev, 1);
+		}
+
+		if (netif_msg_link(qdev))
+			printk(KERN_DEBUG PFX
+			       "%s: Change port_link_state LS_DOWN to LS_UP.\n",
+			       qdev->ndev->name);
+		qdev->port_link_state = LS_UP;
+		netif_start_queue(qdev->ndev);
+		netif_carrier_on(qdev->ndev);
+		if (netif_msg_link(qdev))
+			printk(KERN_INFO PFX
+			       "%s: Link is up at %d Mbps, %s duplex.\n",
+			       qdev->ndev->name,
+			       ql_get_link_speed(qdev),
+			       ql_is_link_full_dup(qdev)
+			       ? "full" : "half");
+
+	} else {	/* Remote error detected */
+
+		if (test_bit(QL_LINK_MASTER,&qdev->flags)) {
+			if (netif_msg_link(qdev))
+				printk(KERN_DEBUG PFX
+				       "%s: Remote error detected. "
+				       "Calling ql_port_start().\n",
+				       qdev->ndev->
+				       name);
+			/*
+			 * ql_port_start() is shared code and needs
+			 * to lock the PHY on it's own.
+			 */
+			ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+			if(ql_port_start(qdev))	{/* Restart port */
+				return -1;
+			} else
+				return 0;
+		}
+	}
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+	return 0;
+}
+
+static void ql_link_state_machine(struct ql3_adapter *qdev)
+{
+	u32 curr_link_state;
+	unsigned long hw_flags;
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+
+	curr_link_state = ql_get_link_state(qdev);
+
+	if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) {
+		if (netif_msg_link(qdev))
+			printk(KERN_INFO PFX
+			       "%s: Reset in progress, skip processing link "
+			       "state.\n", qdev->ndev->name);
+		return;
+	}
+
+	switch (qdev->port_link_state) {
+	default:
+		if (test_bit(QL_LINK_MASTER,&qdev->flags)) {
+			ql_port_start(qdev);
+		}
+		qdev->port_link_state = LS_DOWN;
+		/* Fall Through */
+
+	case LS_DOWN:
+		if (netif_msg_link(qdev))
+			printk(KERN_DEBUG PFX
+			       "%s: port_link_state = LS_DOWN.\n",
+			       qdev->ndev->name);
+		if (curr_link_state == LS_UP) {
+			if (netif_msg_link(qdev))
+				printk(KERN_DEBUG PFX
+				       "%s: curr_link_state = LS_UP.\n",
+				       qdev->ndev->name);
+			if (ql_is_auto_neg_complete(qdev))
+				ql_finish_auto_neg(qdev);
+
+			if (qdev->port_link_state == LS_UP)
+				ql_link_down_detect_clear(qdev);
+
+		}
+		break;
+
+	case LS_UP:
+		/*
+		 * See if the link is currently down or went down and came
+		 * back up
+		 */
+		if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) {
+			if (netif_msg_link(qdev))
+				printk(KERN_INFO PFX "%s: Link is down.\n",
+				       qdev->ndev->name);
+			qdev->port_link_state = LS_DOWN;
+		}
+		break;
+	}
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+}
+
+/*
+ * Caller must take hw_lock and QL_PHY_GIO_SEM.
+ */
+static void ql_get_phy_owner(struct ql3_adapter *qdev)
+{
+	if (ql_this_adapter_controls_port(qdev, qdev->mac_index))
+		set_bit(QL_LINK_MASTER,&qdev->flags);
+	else
+		clear_bit(QL_LINK_MASTER,&qdev->flags);
+}
+
+/*
+ * Caller must take hw_lock and QL_PHY_GIO_SEM.
+ */
+static void ql_init_scan_mode(struct ql3_adapter *qdev)
+{
+	ql_mii_enable_scan_mode(qdev);
+
+	if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
+		if (ql_this_adapter_controls_port(qdev, qdev->mac_index))
+			ql_petbi_init_ex(qdev, qdev->mac_index);
+	} else {
+		if (ql_this_adapter_controls_port(qdev, qdev->mac_index))
+			ql_phy_init_ex(qdev, qdev->mac_index);
+	}
+}
+
+/*
+ * MII_Setup needs to be called before taking the PHY out of reset so that the
+ * management interface clock speed can be set properly.  It would be better if
+ * we had a way to disable MDC until after the PHY is out of reset, but we
+ * don't have that capability.
+ */
+static int ql_mii_setup(struct ql3_adapter *qdev)
+{
+	u32 reg;
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+			(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7))
+		return -1;
+
+	/* Divide 125MHz clock by 28 to meet PHY timing requirements */
+	reg = MAC_MII_CONTROL_CLK_SEL_DIV28;
+
+	ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg,
+			   reg | ((MAC_MII_CONTROL_CLK_SEL_MASK) << 16));
+
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+	return 0;
+}
+
+static u32 ql_supported_modes(struct ql3_adapter *qdev)
+{
+	u32 supported;
+
+	if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
+		supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
+		    | SUPPORTED_Autoneg;
+	} else {
+		supported = SUPPORTED_10baseT_Half
+		    | SUPPORTED_10baseT_Full
+		    | SUPPORTED_100baseT_Half
+		    | SUPPORTED_100baseT_Full
+		    | SUPPORTED_1000baseT_Half
+		    | SUPPORTED_1000baseT_Full
+		    | SUPPORTED_Autoneg | SUPPORTED_TP;
+	}
+
+	return supported;
+}
+
+static int ql_get_auto_cfg_status(struct ql3_adapter *qdev)
+{
+	int status;
+	unsigned long hw_flags;
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+		(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7))
+		return 0;
+	status = ql_is_auto_cfg(qdev);
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return status;
+}
+
+static u32 ql_get_speed(struct ql3_adapter *qdev)
+{
+	u32 status;
+	unsigned long hw_flags;
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+		(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7))
+		return 0;
+	status = ql_get_link_speed(qdev);
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return status;
+}
+
+static int ql_get_full_dup(struct ql3_adapter *qdev)
+{
+	int status;
+	unsigned long hw_flags;
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+		(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7))
+		return 0;
+	status = ql_is_link_full_dup(qdev);
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	return status;
+}
+
+
+static int ql_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->supported = ql_supported_modes(qdev);
+
+	if (test_bit(QL_LINK_OPTICAL,&qdev->flags)) {
+		ecmd->port = PORT_FIBRE;
+	} else {
+		ecmd->port = PORT_TP;
+		ecmd->phy_address = qdev->PHYAddr;
+	}
+	ecmd->advertising = ql_supported_modes(qdev);
+	ecmd->autoneg = ql_get_auto_cfg_status(qdev);
+	ecmd->speed = ql_get_speed(qdev);
+	ecmd->duplex = ql_get_full_dup(qdev);
+	return 0;
+}
+
+static void ql_get_drvinfo(struct net_device *ndev,
+			   struct ethtool_drvinfo *drvinfo)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	strncpy(drvinfo->driver, ql3xxx_driver_name, 32);
+	strncpy(drvinfo->version, ql3xxx_driver_version, 32);
+	strncpy(drvinfo->fw_version, "N/A", 32);
+	strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
+	drvinfo->n_stats = 0;
+	drvinfo->testinfo_len = 0;
+	drvinfo->regdump_len = 0;
+	drvinfo->eedump_len = 0;
+}
+
+static u32 ql_get_msglevel(struct net_device *ndev)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	return qdev->msg_enable;
+}
+
+static void ql_set_msglevel(struct net_device *ndev, u32 value)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	qdev->msg_enable = value;
+}
+
+static struct ethtool_ops ql3xxx_ethtool_ops = {
+	.get_settings = ql_get_settings,
+	.get_drvinfo = ql_get_drvinfo,
+	.get_perm_addr = ethtool_op_get_perm_addr,
+	.get_link = ethtool_op_get_link,
+	.get_msglevel = ql_get_msglevel,
+	.set_msglevel = ql_set_msglevel,
+};
+
+static int ql_populate_free_queue(struct ql3_adapter *qdev)
+{
+	struct ql_rcv_buf_cb *lrg_buf_cb = qdev->lrg_buf_free_head;
+	u64 map;
+
+	while (lrg_buf_cb) {
+		if (!lrg_buf_cb->skb) {
+			lrg_buf_cb->skb = dev_alloc_skb(qdev->lrg_buffer_len);
+			if (unlikely(!lrg_buf_cb->skb)) {
+				printk(KERN_DEBUG PFX
+				       "%s: Failed dev_alloc_skb().\n",
+				       qdev->ndev->name);
+				break;
+			} else {
+				/*
+				 * We save some space to copy the ethhdr from
+				 * first buffer
+				 */
+				skb_reserve(lrg_buf_cb->skb, QL_HEADER_SPACE);
+				map = pci_map_single(qdev->pdev,
+						     lrg_buf_cb->skb->data,
+						     qdev->lrg_buffer_len -
+						     QL_HEADER_SPACE,
+						     PCI_DMA_FROMDEVICE);
+				lrg_buf_cb->buf_phy_addr_low =
+				    cpu_to_le32(LS_64BITS(map));
+				lrg_buf_cb->buf_phy_addr_high =
+				    cpu_to_le32(MS_64BITS(map));
+				pci_unmap_addr_set(lrg_buf_cb, mapaddr, map);
+				pci_unmap_len_set(lrg_buf_cb, maplen,
+						  qdev->lrg_buffer_len -
+						  QL_HEADER_SPACE);
+				--qdev->lrg_buf_skb_check;
+				if (!qdev->lrg_buf_skb_check)
+					return 1;
+			}
+		}
+		lrg_buf_cb = lrg_buf_cb->next;
+	}
+	return 0;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static void ql_update_lrg_bufq_prod_index(struct ql3_adapter *qdev)
+{
+	struct bufq_addr_element *lrg_buf_q_ele;
+	int i;
+	struct ql_rcv_buf_cb *lrg_buf_cb;
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+
+	if ((qdev->lrg_buf_free_count >= 8)
+	    && (qdev->lrg_buf_release_cnt >= 16)) {
+
+		if (qdev->lrg_buf_skb_check)
+			if (!ql_populate_free_queue(qdev))
+				return;
+
+		lrg_buf_q_ele = qdev->lrg_buf_next_free;
+
+		while ((qdev->lrg_buf_release_cnt >= 16)
+		       && (qdev->lrg_buf_free_count >= 8)) {
+
+			for (i = 0; i < 8; i++) {
+				lrg_buf_cb =
+				    ql_get_from_lrg_buf_free_list(qdev);
+				lrg_buf_q_ele->addr_high =
+				    lrg_buf_cb->buf_phy_addr_high;
+				lrg_buf_q_ele->addr_low =
+				    lrg_buf_cb->buf_phy_addr_low;
+				lrg_buf_q_ele++;
+
+				qdev->lrg_buf_release_cnt--;
+			}
+
+			qdev->lrg_buf_q_producer_index++;
+
+			if (qdev->lrg_buf_q_producer_index == NUM_LBUFQ_ENTRIES)
+				qdev->lrg_buf_q_producer_index = 0;
+
+			if (qdev->lrg_buf_q_producer_index ==
+			    (NUM_LBUFQ_ENTRIES - 1)) {
+				lrg_buf_q_ele = qdev->lrg_buf_q_virt_addr;
+			}
+		}
+
+		qdev->lrg_buf_next_free = lrg_buf_q_ele;
+
+		ql_write_common_reg(qdev,
+				    (u32 *) & port_regs->CommonRegs.
+				    rxLargeQProducerIndex,
+				    qdev->lrg_buf_q_producer_index);
+	}
+}
+
+static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
+				   struct ob_mac_iocb_rsp *mac_rsp)
+{
+	struct ql_tx_buf_cb *tx_cb;
+
+	tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
+	pci_unmap_single(qdev->pdev,
+			 pci_unmap_addr(tx_cb, mapaddr),
+			 pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE);
+	dev_kfree_skb_irq(tx_cb->skb);
+	qdev->stats.tx_packets++;
+	qdev->stats.tx_bytes += tx_cb->skb->len;
+	tx_cb->skb = NULL;
+	atomic_inc(&qdev->tx_count);
+}
+
+static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
+				   struct ib_mac_iocb_rsp *ib_mac_rsp_ptr)
+{
+	long int offset;
+	u32 lrg_buf_phy_addr_low = 0;
+	struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL;
+	struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL;
+	u32 *curr_ial_ptr;
+	struct sk_buff *skb;
+	u16 length = le16_to_cpu(ib_mac_rsp_ptr->length);
+
+	/*
+	 * Get the inbound address list (small buffer).
+	 */
+	offset = qdev->small_buf_index * QL_SMALL_BUFFER_SIZE;
+	if (++qdev->small_buf_index == NUM_SMALL_BUFFERS)
+		qdev->small_buf_index = 0;
+
+	curr_ial_ptr = (u32 *) (qdev->small_buf_virt_addr + offset);
+	qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
+	qdev->small_buf_release_cnt++;
+
+	/* start of first buffer */
+	lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
+	lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
+	qdev->lrg_buf_release_cnt++;
+	if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
+		qdev->lrg_buf_index = 0;
+	curr_ial_ptr++;		/* 64-bit pointers require two incs. */
+	curr_ial_ptr++;
+
+	/* start of second buffer */
+	lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
+	lrg_buf_cb2 = &qdev->lrg_buf[qdev->lrg_buf_index];
+
+	/*
+	 * Second buffer gets sent up the stack.
+	 */
+	qdev->lrg_buf_release_cnt++;
+	if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
+		qdev->lrg_buf_index = 0;
+	skb = lrg_buf_cb2->skb;
+
+	qdev->stats.rx_packets++;
+	qdev->stats.rx_bytes += length;
+
+	skb_put(skb, length);
+	pci_unmap_single(qdev->pdev,
+			 pci_unmap_addr(lrg_buf_cb2, mapaddr),
+			 pci_unmap_len(lrg_buf_cb2, maplen),
+			 PCI_DMA_FROMDEVICE);
+	prefetch(skb->data);
+	skb->dev = qdev->ndev;
+	skb->ip_summed = CHECKSUM_NONE;
+	skb->protocol = eth_type_trans(skb, qdev->ndev);
+
+	netif_receive_skb(skb);
+	qdev->ndev->last_rx = jiffies;
+	lrg_buf_cb2->skb = NULL;
+
+	ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
+	ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
+}
+
+static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
+				     struct ib_ip_iocb_rsp *ib_ip_rsp_ptr)
+{
+	long int offset;
+	u32 lrg_buf_phy_addr_low = 0;
+	struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL;
+	struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL;
+	u32 *curr_ial_ptr;
+	struct sk_buff *skb1, *skb2;
+	struct net_device *ndev = qdev->ndev;
+	u16 length = le16_to_cpu(ib_ip_rsp_ptr->length);
+	u16 size = 0;
+
+	/*
+	 * Get the inbound address list (small buffer).
+	 */
+
+	offset = qdev->small_buf_index * QL_SMALL_BUFFER_SIZE;
+	if (++qdev->small_buf_index == NUM_SMALL_BUFFERS)
+		qdev->small_buf_index = 0;
+	curr_ial_ptr = (u32 *) (qdev->small_buf_virt_addr + offset);
+	qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
+	qdev->small_buf_release_cnt++;
+
+	/* start of first buffer */
+	lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
+	lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
+
+	qdev->lrg_buf_release_cnt++;
+	if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
+		qdev->lrg_buf_index = 0;
+	skb1 = lrg_buf_cb1->skb;
+	curr_ial_ptr++;		/* 64-bit pointers require two incs. */
+	curr_ial_ptr++;
+
+	/* start of second buffer */
+	lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
+	lrg_buf_cb2 = &qdev->lrg_buf[qdev->lrg_buf_index];
+	skb2 = lrg_buf_cb2->skb;
+	qdev->lrg_buf_release_cnt++;
+	if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
+		qdev->lrg_buf_index = 0;
+
+	qdev->stats.rx_packets++;
+	qdev->stats.rx_bytes += length;
+
+	/*
+	 * Copy the ethhdr from first buffer to second. This
+	 * is necessary for IP completions.
+	 */
+	if (*((u16 *) skb1->data) != 0xFFFF)
+		size = VLAN_ETH_HLEN;
+	else
+		size = ETH_HLEN;
+
+	skb_put(skb2, length);	/* Just the second buffer length here. */
+	pci_unmap_single(qdev->pdev,
+			 pci_unmap_addr(lrg_buf_cb2, mapaddr),
+			 pci_unmap_len(lrg_buf_cb2, maplen),
+			 PCI_DMA_FROMDEVICE);
+	prefetch(skb2->data);
+
+	memcpy(skb_push(skb2, size), skb1->data + VLAN_ID_LEN, size);
+	skb2->dev = qdev->ndev;
+	skb2->ip_summed = CHECKSUM_NONE;
+	skb2->protocol = eth_type_trans(skb2, qdev->ndev);
+
+	netif_receive_skb(skb2);
+	ndev->last_rx = jiffies;
+	lrg_buf_cb2->skb = NULL;
+
+	ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
+	ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
+}
+
+static int ql_tx_rx_clean(struct ql3_adapter *qdev,
+			  int *tx_cleaned, int *rx_cleaned, int work_to_do)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	struct net_rsp_iocb *net_rsp;
+	struct net_device *ndev = qdev->ndev;
+	unsigned long hw_flags;
+
+	/* While there are entries in the completion queue. */
+	while ((cpu_to_le32(*(qdev->prsp_producer_index)) !=
+		qdev->rsp_consumer_index) && (*rx_cleaned < work_to_do)) {
+
+		net_rsp = qdev->rsp_current;
+		switch (net_rsp->opcode) {
+
+		case OPCODE_OB_MAC_IOCB_FN0:
+		case OPCODE_OB_MAC_IOCB_FN2:
+			ql_process_mac_tx_intr(qdev, (struct ob_mac_iocb_rsp *)
+					       net_rsp);
+			(*tx_cleaned)++;
+			break;
+
+		case OPCODE_IB_MAC_IOCB:
+			ql_process_mac_rx_intr(qdev, (struct ib_mac_iocb_rsp *)
+					       net_rsp);
+			(*rx_cleaned)++;
+			break;
+
+		case OPCODE_IB_IP_IOCB:
+			ql_process_macip_rx_intr(qdev, (struct ib_ip_iocb_rsp *)
+						 net_rsp);
+			(*rx_cleaned)++;
+			break;
+		default:
+			{
+				u32 *tmp = (u32 *) net_rsp;
+				printk(KERN_ERR PFX
+				       "%s: Hit default case, not "
+				       "handled!\n"
+				       "	dropping the packet, opcode = "
+				       "%x.\n",
+				       ndev->name, net_rsp->opcode);
+				printk(KERN_ERR PFX
+				       "0x%08lx 0x%08lx 0x%08lx 0x%08lx \n",
+				       (unsigned long int)tmp[0],
+				       (unsigned long int)tmp[1],
+				       (unsigned long int)tmp[2],
+				       (unsigned long int)tmp[3]);
+			}
+		}
+
+		qdev->rsp_consumer_index++;
+
+		if (qdev->rsp_consumer_index == NUM_RSP_Q_ENTRIES) {
+			qdev->rsp_consumer_index = 0;
+			qdev->rsp_current = qdev->rsp_q_virt_addr;
+		} else {
+			qdev->rsp_current++;
+		}
+	}
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+
+	ql_update_lrg_bufq_prod_index(qdev);
+
+	if (qdev->small_buf_release_cnt >= 16) {
+		while (qdev->small_buf_release_cnt >= 16) {
+			qdev->small_buf_q_producer_index++;
+
+			if (qdev->small_buf_q_producer_index ==
+			    NUM_SBUFQ_ENTRIES)
+				qdev->small_buf_q_producer_index = 0;
+			qdev->small_buf_release_cnt -= 8;
+		}
+
+		ql_write_common_reg(qdev,
+				    (u32 *) & port_regs->CommonRegs.
+				    rxSmallQProducerIndex,
+				    qdev->small_buf_q_producer_index);
+	}
+
+	ql_write_common_reg(qdev,
+			    (u32 *) & port_regs->CommonRegs.rspQConsumerIndex,
+			    qdev->rsp_consumer_index);
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+	if (unlikely(netif_queue_stopped(qdev->ndev))) {
+		if (netif_queue_stopped(qdev->ndev) &&
+		    (atomic_read(&qdev->tx_count) > (NUM_REQ_Q_ENTRIES / 4)))
+			netif_wake_queue(qdev->ndev);
+	}
+
+	return *tx_cleaned + *rx_cleaned;
+}
+
+static int ql_poll(struct net_device *ndev, int *budget)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	int work_to_do = min(*budget, ndev->quota);
+	int rx_cleaned = 0, tx_cleaned = 0;
+
+	if (!netif_carrier_ok(ndev))
+		goto quit_polling;
+
+	ql_tx_rx_clean(qdev, &tx_cleaned, &rx_cleaned, work_to_do);
+	*budget -= rx_cleaned;
+	ndev->quota -= rx_cleaned;
+
+	if ((!tx_cleaned && !rx_cleaned) || !netif_running(ndev)) {
+quit_polling:
+		netif_rx_complete(ndev);
+		ql_enable_interrupts(qdev);
+		return 0;
+	}
+	return 1;
+}
+
+static irqreturn_t ql3xxx_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+
+	struct net_device *ndev = dev_id;
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	u32 value;
+	int handled = 1;
+	u32 var;
+
+	port_regs = qdev->mem_map_registers;
+
+	value =
+	    ql_read_common_reg_l(qdev, &port_regs->CommonRegs.ispControlStatus);
+
+	if (value & (ISP_CONTROL_FE | ISP_CONTROL_RI)) {
+		spin_lock(&qdev->adapter_lock);
+		netif_stop_queue(qdev->ndev);
+		netif_carrier_off(qdev->ndev);
+		ql_disable_interrupts(qdev);
+		qdev->port_link_state = LS_DOWN;
+		set_bit(QL_RESET_ACTIVE,&qdev->flags) ;
+
+		if (value & ISP_CONTROL_FE) {
+			/*
+			 * Chip Fatal Error.
+			 */
+			var =
+			    ql_read_page0_reg_l(qdev,
+					      &port_regs->PortFatalErrStatus);
+			printk(KERN_WARNING PFX
+			       "%s: Resetting chip. PortFatalErrStatus "
+			       "register = 0x%x\n", ndev->name, var);
+			set_bit(QL_RESET_START,&qdev->flags) ;
+		} else {
+			/*
+			 * Soft Reset Requested.
+			 */
+			set_bit(QL_RESET_PER_SCSI,&qdev->flags) ;
+			printk(KERN_ERR PFX
+			       "%s: Another function issued a reset to the "
+			       "chip. ISR value = %x.\n", ndev->name, value);
+		}
+		queue_work(qdev->workqueue, &qdev->reset_work);
+		spin_unlock(&qdev->adapter_lock);
+	} else if (value & ISP_IMR_DISABLE_CMPL_INT) {
+		ql_disable_interrupts(qdev);
+		if (likely(netif_rx_schedule_prep(ndev)))
+			__netif_rx_schedule(ndev);
+		else
+			ql_enable_interrupts(qdev);
+	} else {
+		return IRQ_NONE;
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	struct ql_tx_buf_cb *tx_cb;
+	struct ob_mac_iocb_req *mac_iocb_ptr;
+	u64 map;
+
+	if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
+		if (!netif_queue_stopped(ndev))
+			netif_stop_queue(ndev);
+		return NETDEV_TX_BUSY;
+	}
+	tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
+	mac_iocb_ptr = tx_cb->queue_entry;
+	memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
+	mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
+	mac_iocb_ptr->flags |= qdev->mb_bit_mask;
+	mac_iocb_ptr->transaction_id = qdev->req_producer_index;
+	mac_iocb_ptr->data_len = cpu_to_le16((u16) skb->len);
+	tx_cb->skb = skb;
+	map = pci_map_single(qdev->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+	mac_iocb_ptr->buf_addr0_low = cpu_to_le32(LS_64BITS(map));
+	mac_iocb_ptr->buf_addr0_high = cpu_to_le32(MS_64BITS(map));
+	mac_iocb_ptr->buf_0_len = cpu_to_le32(skb->len | OB_MAC_IOCB_REQ_E);
+	pci_unmap_addr_set(tx_cb, mapaddr, map);
+	pci_unmap_len_set(tx_cb, maplen, skb->len);
+	atomic_dec(&qdev->tx_count);
+
+	qdev->req_producer_index++;
+	if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
+		qdev->req_producer_index = 0;
+	wmb();
+	ql_write_common_reg_l(qdev,
+			    (u32 *) & port_regs->CommonRegs.reqQProducerIndex,
+			    qdev->req_producer_index);
+
+	ndev->trans_start = jiffies;
+	if (netif_msg_tx_queued(qdev))
+		printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n",
+		       ndev->name, qdev->req_producer_index, skb->len);
+
+	return NETDEV_TX_OK;
+}
+static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
+{
+	qdev->req_q_size =
+	    (u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req));
+
+	qdev->req_q_virt_addr =
+	    pci_alloc_consistent(qdev->pdev,
+				 (size_t) qdev->req_q_size,
+				 &qdev->req_q_phy_addr);
+
+	if ((qdev->req_q_virt_addr == NULL) ||
+	    LS_64BITS(qdev->req_q_phy_addr) & (qdev->req_q_size - 1)) {
+		printk(KERN_ERR PFX "%s: reqQ failed.\n",
+		       qdev->ndev->name);
+		return -ENOMEM;
+	}
+
+	qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
+
+	qdev->rsp_q_virt_addr =
+	    pci_alloc_consistent(qdev->pdev,
+				 (size_t) qdev->rsp_q_size,
+				 &qdev->rsp_q_phy_addr);
+
+	if ((qdev->rsp_q_virt_addr == NULL) ||
+	    LS_64BITS(qdev->rsp_q_phy_addr) & (qdev->rsp_q_size - 1)) {
+		printk(KERN_ERR PFX
+		       "%s: rspQ allocation failed\n",
+		       qdev->ndev->name);
+		pci_free_consistent(qdev->pdev, (size_t) qdev->req_q_size,
+				    qdev->req_q_virt_addr,
+				    qdev->req_q_phy_addr);
+		return -ENOMEM;
+	}
+
+	set_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags);
+
+	return 0;
+}
+
+static void ql_free_net_req_rsp_queues(struct ql3_adapter *qdev)
+{
+	if (!test_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags)) {
+		printk(KERN_INFO PFX
+		       "%s: Already done.\n", qdev->ndev->name);
+		return;
+	}
+
+	pci_free_consistent(qdev->pdev,
+			    qdev->req_q_size,
+			    qdev->req_q_virt_addr, qdev->req_q_phy_addr);
+
+	qdev->req_q_virt_addr = NULL;
+
+	pci_free_consistent(qdev->pdev,
+			    qdev->rsp_q_size,
+			    qdev->rsp_q_virt_addr, qdev->rsp_q_phy_addr);
+
+	qdev->rsp_q_virt_addr = NULL;
+
+	clear_bit(QL_ALLOC_REQ_RSP_Q_DONE,&qdev->flags);
+}
+
+static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)
+{
+	/* Create Large Buffer Queue */
+	qdev->lrg_buf_q_size =
+	    NUM_LBUFQ_ENTRIES * sizeof(struct lrg_buf_q_entry);
+	if (qdev->lrg_buf_q_size < PAGE_SIZE)
+		qdev->lrg_buf_q_alloc_size = PAGE_SIZE;
+	else
+		qdev->lrg_buf_q_alloc_size = qdev->lrg_buf_q_size * 2;
+
+	qdev->lrg_buf_q_alloc_virt_addr =
+	    pci_alloc_consistent(qdev->pdev,
+				 qdev->lrg_buf_q_alloc_size,
+				 &qdev->lrg_buf_q_alloc_phy_addr);
+
+	if (qdev->lrg_buf_q_alloc_virt_addr == NULL) {
+		printk(KERN_ERR PFX
+		       "%s: lBufQ failed\n", qdev->ndev->name);
+		return -ENOMEM;
+	}
+	qdev->lrg_buf_q_virt_addr = qdev->lrg_buf_q_alloc_virt_addr;
+	qdev->lrg_buf_q_phy_addr = qdev->lrg_buf_q_alloc_phy_addr;
+
+	/* Create Small Buffer Queue */
+	qdev->small_buf_q_size =
+	    NUM_SBUFQ_ENTRIES * sizeof(struct lrg_buf_q_entry);
+	if (qdev->small_buf_q_size < PAGE_SIZE)
+		qdev->small_buf_q_alloc_size = PAGE_SIZE;
+	else
+		qdev->small_buf_q_alloc_size = qdev->small_buf_q_size * 2;
+
+	qdev->small_buf_q_alloc_virt_addr =
+	    pci_alloc_consistent(qdev->pdev,
+				 qdev->small_buf_q_alloc_size,
+				 &qdev->small_buf_q_alloc_phy_addr);
+
+	if (qdev->small_buf_q_alloc_virt_addr == NULL) {
+		printk(KERN_ERR PFX
+		       "%s: Small Buffer Queue allocation failed.\n",
+		       qdev->ndev->name);
+		pci_free_consistent(qdev->pdev, qdev->lrg_buf_q_alloc_size,
+				    qdev->lrg_buf_q_alloc_virt_addr,
+				    qdev->lrg_buf_q_alloc_phy_addr);
+		return -ENOMEM;
+	}
+
+	qdev->small_buf_q_virt_addr = qdev->small_buf_q_alloc_virt_addr;
+	qdev->small_buf_q_phy_addr = qdev->small_buf_q_alloc_phy_addr;
+	set_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags);
+	return 0;
+}
+
+static void ql_free_buffer_queues(struct ql3_adapter *qdev)
+{
+	if (!test_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags)) {
+		printk(KERN_INFO PFX
+		       "%s: Already done.\n", qdev->ndev->name);
+		return;
+	}
+
+	pci_free_consistent(qdev->pdev,
+			    qdev->lrg_buf_q_alloc_size,
+			    qdev->lrg_buf_q_alloc_virt_addr,
+			    qdev->lrg_buf_q_alloc_phy_addr);
+
+	qdev->lrg_buf_q_virt_addr = NULL;
+
+	pci_free_consistent(qdev->pdev,
+			    qdev->small_buf_q_alloc_size,
+			    qdev->small_buf_q_alloc_virt_addr,
+			    qdev->small_buf_q_alloc_phy_addr);
+
+	qdev->small_buf_q_virt_addr = NULL;
+
+	clear_bit(QL_ALLOC_BUFQS_DONE,&qdev->flags);
+}
+
+static int ql_alloc_small_buffers(struct ql3_adapter *qdev)
+{
+	int i;
+	struct bufq_addr_element *small_buf_q_entry;
+
+	/* Currently we allocate on one of memory and use it for smallbuffers */
+	qdev->small_buf_total_size =
+	    (QL_ADDR_ELE_PER_BUFQ_ENTRY * NUM_SBUFQ_ENTRIES *
+	     QL_SMALL_BUFFER_SIZE);
+
+	qdev->small_buf_virt_addr =
+	    pci_alloc_consistent(qdev->pdev,
+				 qdev->small_buf_total_size,
+				 &qdev->small_buf_phy_addr);
+
+	if (qdev->small_buf_virt_addr == NULL) {
+		printk(KERN_ERR PFX
+		       "%s: Failed to get small buffer memory.\n",
+		       qdev->ndev->name);
+		return -ENOMEM;
+	}
+
+	qdev->small_buf_phy_addr_low = LS_64BITS(qdev->small_buf_phy_addr);
+	qdev->small_buf_phy_addr_high = MS_64BITS(qdev->small_buf_phy_addr);
+
+	small_buf_q_entry = qdev->small_buf_q_virt_addr;
+
+	qdev->last_rsp_offset = qdev->small_buf_phy_addr_low;
+
+	/* Initialize the small buffer queue. */
+	for (i = 0; i < (QL_ADDR_ELE_PER_BUFQ_ENTRY * NUM_SBUFQ_ENTRIES); i++) {
+		small_buf_q_entry->addr_high =
+		    cpu_to_le32(qdev->small_buf_phy_addr_high);
+		small_buf_q_entry->addr_low =
+		    cpu_to_le32(qdev->small_buf_phy_addr_low +
+				(i * QL_SMALL_BUFFER_SIZE));
+		small_buf_q_entry++;
+	}
+	qdev->small_buf_index = 0;
+	set_bit(QL_ALLOC_SMALL_BUF_DONE,&qdev->flags);
+	return 0;
+}
+
+static void ql_free_small_buffers(struct ql3_adapter *qdev)
+{
+	if (!test_bit(QL_ALLOC_SMALL_BUF_DONE,&qdev->flags)) {
+		printk(KERN_INFO PFX
+		       "%s: Already done.\n", qdev->ndev->name);
+		return;
+	}
+	if (qdev->small_buf_virt_addr != NULL) {
+		pci_free_consistent(qdev->pdev,
+				    qdev->small_buf_total_size,
+				    qdev->small_buf_virt_addr,
+				    qdev->small_buf_phy_addr);
+
+		qdev->small_buf_virt_addr = NULL;
+	}
+}
+
+static void ql_free_large_buffers(struct ql3_adapter *qdev)
+{
+	int i = 0;
+	struct ql_rcv_buf_cb *lrg_buf_cb;
+
+	for (i = 0; i < NUM_LARGE_BUFFERS; i++) {
+		lrg_buf_cb = &qdev->lrg_buf[i];
+		if (lrg_buf_cb->skb) {
+			dev_kfree_skb(lrg_buf_cb->skb);
+			pci_unmap_single(qdev->pdev,
+					 pci_unmap_addr(lrg_buf_cb, mapaddr),
+					 pci_unmap_len(lrg_buf_cb, maplen),
+					 PCI_DMA_FROMDEVICE);
+			memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb));
+		} else {
+			break;
+		}
+	}
+}
+
+static void ql_init_large_buffers(struct ql3_adapter *qdev)
+{
+	int i;
+	struct ql_rcv_buf_cb *lrg_buf_cb;
+	struct bufq_addr_element *buf_addr_ele = qdev->lrg_buf_q_virt_addr;
+
+	for (i = 0; i < NUM_LARGE_BUFFERS; i++) {
+		lrg_buf_cb = &qdev->lrg_buf[i];
+		buf_addr_ele->addr_high = lrg_buf_cb->buf_phy_addr_high;
+		buf_addr_ele->addr_low = lrg_buf_cb->buf_phy_addr_low;
+		buf_addr_ele++;
+	}
+	qdev->lrg_buf_index = 0;
+	qdev->lrg_buf_skb_check = 0;
+}
+
+static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
+{
+	int i;
+	struct ql_rcv_buf_cb *lrg_buf_cb;
+	struct sk_buff *skb;
+	u64 map;
+
+	for (i = 0; i < NUM_LARGE_BUFFERS; i++) {
+		skb = dev_alloc_skb(qdev->lrg_buffer_len);
+		if (unlikely(!skb)) {
+			/* Better luck next round */
+			printk(KERN_ERR PFX
+			       "%s: large buff alloc failed, "
+			       "for %d bytes at index %d.\n",
+			       qdev->ndev->name,
+			       qdev->lrg_buffer_len * 2, i);
+			ql_free_large_buffers(qdev);
+			return -ENOMEM;
+		} else {
+
+			lrg_buf_cb = &qdev->lrg_buf[i];
+			memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb));
+			lrg_buf_cb->index = i;
+			lrg_buf_cb->skb = skb;
+			/*
+			 * We save some space to copy the ethhdr from first
+			 * buffer
+			 */
+			skb_reserve(skb, QL_HEADER_SPACE);
+			map = pci_map_single(qdev->pdev,
+					     skb->data,
+					     qdev->lrg_buffer_len -
+					     QL_HEADER_SPACE,
+					     PCI_DMA_FROMDEVICE);
+			pci_unmap_addr_set(lrg_buf_cb, mapaddr, map);
+			pci_unmap_len_set(lrg_buf_cb, maplen,
+					  qdev->lrg_buffer_len -
+					  QL_HEADER_SPACE);
+			lrg_buf_cb->buf_phy_addr_low =
+			    cpu_to_le32(LS_64BITS(map));
+			lrg_buf_cb->buf_phy_addr_high =
+			    cpu_to_le32(MS_64BITS(map));
+		}
+	}
+	return 0;
+}
+
+static void ql_create_send_free_list(struct ql3_adapter *qdev)
+{
+	struct ql_tx_buf_cb *tx_cb;
+	int i;
+	struct ob_mac_iocb_req *req_q_curr =
+					qdev->req_q_virt_addr;
+
+	/* Create free list of transmit buffers */
+	for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
+		tx_cb = &qdev->tx_buf[i];
+		tx_cb->skb = NULL;
+		tx_cb->queue_entry = req_q_curr;
+		req_q_curr++;
+	}
+}
+
+static int ql_alloc_mem_resources(struct ql3_adapter *qdev)
+{
+	if (qdev->ndev->mtu == NORMAL_MTU_SIZE)
+		qdev->lrg_buffer_len = NORMAL_MTU_SIZE;
+	else if (qdev->ndev->mtu == JUMBO_MTU_SIZE) {
+		qdev->lrg_buffer_len = JUMBO_MTU_SIZE;
+	} else {
+		printk(KERN_ERR PFX
+		       "%s: Invalid mtu size.  Only 1500 and 9000 are accepted.\n",
+		       qdev->ndev->name);
+		return -ENOMEM;
+	}
+	qdev->lrg_buffer_len += VLAN_ETH_HLEN + VLAN_ID_LEN + QL_HEADER_SPACE;
+	qdev->max_frame_size =
+	    (qdev->lrg_buffer_len - QL_HEADER_SPACE) + ETHERNET_CRC_SIZE;
+
+	/*
+	 * First allocate a page of shared memory and use it for shadow
+	 * locations of Network Request Queue Consumer Address Register and
+	 * Network Completion Queue Producer Index Register
+	 */
+	qdev->shadow_reg_virt_addr =
+	    pci_alloc_consistent(qdev->pdev,
+				 PAGE_SIZE, &qdev->shadow_reg_phy_addr);
+
+	if (qdev->shadow_reg_virt_addr != NULL) {
+		qdev->preq_consumer_index = (u16 *) qdev->shadow_reg_virt_addr;
+		qdev->req_consumer_index_phy_addr_high =
+		    MS_64BITS(qdev->shadow_reg_phy_addr);
+		qdev->req_consumer_index_phy_addr_low =
+		    LS_64BITS(qdev->shadow_reg_phy_addr);
+
+		qdev->prsp_producer_index =
+		    (u32 *) (((u8 *) qdev->preq_consumer_index) + 8);
+		qdev->rsp_producer_index_phy_addr_high =
+		    qdev->req_consumer_index_phy_addr_high;
+		qdev->rsp_producer_index_phy_addr_low =
+		    qdev->req_consumer_index_phy_addr_low + 8;
+	} else {
+		printk(KERN_ERR PFX
+		       "%s: shadowReg Alloc failed.\n", qdev->ndev->name);
+		return -ENOMEM;
+	}
+
+	if (ql_alloc_net_req_rsp_queues(qdev) != 0) {
+		printk(KERN_ERR PFX
+		       "%s: ql_alloc_net_req_rsp_queues failed.\n",
+		       qdev->ndev->name);
+		goto err_req_rsp;
+	}
+
+	if (ql_alloc_buffer_queues(qdev) != 0) {
+		printk(KERN_ERR PFX
+		       "%s: ql_alloc_buffer_queues failed.\n",
+		       qdev->ndev->name);
+		goto err_buffer_queues;
+	}
+
+	if (ql_alloc_small_buffers(qdev) != 0) {
+		printk(KERN_ERR PFX
+		       "%s: ql_alloc_small_buffers failed\n", qdev->ndev->name);
+		goto err_small_buffers;
+	}
+
+	if (ql_alloc_large_buffers(qdev) != 0) {
+		printk(KERN_ERR PFX
+		       "%s: ql_alloc_large_buffers failed\n", qdev->ndev->name);
+		goto err_small_buffers;
+	}
+
+	/* Initialize the large buffer queue. */
+	ql_init_large_buffers(qdev);
+	ql_create_send_free_list(qdev);
+
+	qdev->rsp_current = qdev->rsp_q_virt_addr;
+
+	return 0;
+
+err_small_buffers:
+	ql_free_buffer_queues(qdev);
+err_buffer_queues:
+	ql_free_net_req_rsp_queues(qdev);
+err_req_rsp:
+	pci_free_consistent(qdev->pdev,
+			    PAGE_SIZE,
+			    qdev->shadow_reg_virt_addr,
+			    qdev->shadow_reg_phy_addr);
+
+	return -ENOMEM;
+}
+
+static void ql_free_mem_resources(struct ql3_adapter *qdev)
+{
+	ql_free_large_buffers(qdev);
+	ql_free_small_buffers(qdev);
+	ql_free_buffer_queues(qdev);
+	ql_free_net_req_rsp_queues(qdev);
+	if (qdev->shadow_reg_virt_addr != NULL) {
+		pci_free_consistent(qdev->pdev,
+				    PAGE_SIZE,
+				    qdev->shadow_reg_virt_addr,
+				    qdev->shadow_reg_phy_addr);
+		qdev->shadow_reg_virt_addr = NULL;
+	}
+}
+
+static int ql_init_misc_registers(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_local_ram_registers *local_ram =
+	    (struct ql3xxx_local_ram_registers *)qdev->mem_map_registers;
+
+	if(ql_sem_spinlock(qdev, QL_DDR_RAM_SEM_MASK,
+			(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 4))
+		return -1;
+
+	ql_write_page2_reg(qdev,
+			   &local_ram->bufletSize, qdev->nvram_data.bufletSize);
+
+	ql_write_page2_reg(qdev,
+			   &local_ram->maxBufletCount,
+			   qdev->nvram_data.bufletCount);
+
+	ql_write_page2_reg(qdev,
+			   &local_ram->freeBufletThresholdLow,
+			   (qdev->nvram_data.tcpWindowThreshold25 << 16) |
+			   (qdev->nvram_data.tcpWindowThreshold0));
+
+	ql_write_page2_reg(qdev,
+			   &local_ram->freeBufletThresholdHigh,
+			   qdev->nvram_data.tcpWindowThreshold50);
+
+	ql_write_page2_reg(qdev,
+			   &local_ram->ipHashTableBase,
+			   (qdev->nvram_data.ipHashTableBaseHi << 16) |
+			   qdev->nvram_data.ipHashTableBaseLo);
+	ql_write_page2_reg(qdev,
+			   &local_ram->ipHashTableCount,
+			   qdev->nvram_data.ipHashTableSize);
+	ql_write_page2_reg(qdev,
+			   &local_ram->tcpHashTableBase,
+			   (qdev->nvram_data.tcpHashTableBaseHi << 16) |
+			   qdev->nvram_data.tcpHashTableBaseLo);
+	ql_write_page2_reg(qdev,
+			   &local_ram->tcpHashTableCount,
+			   qdev->nvram_data.tcpHashTableSize);
+	ql_write_page2_reg(qdev,
+			   &local_ram->ncbBase,
+			   (qdev->nvram_data.ncbTableBaseHi << 16) |
+			   qdev->nvram_data.ncbTableBaseLo);
+	ql_write_page2_reg(qdev,
+			   &local_ram->maxNcbCount,
+			   qdev->nvram_data.ncbTableSize);
+	ql_write_page2_reg(qdev,
+			   &local_ram->drbBase,
+			   (qdev->nvram_data.drbTableBaseHi << 16) |
+			   qdev->nvram_data.drbTableBaseLo);
+	ql_write_page2_reg(qdev,
+			   &local_ram->maxDrbCount,
+			   qdev->nvram_data.drbTableSize);
+	ql_sem_unlock(qdev, QL_DDR_RAM_SEM_MASK);
+	return 0;
+}
+
+static int ql_adapter_initialize(struct ql3_adapter *qdev)
+{
+	u32 value;
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	struct ql3xxx_host_memory_registers __iomem *hmem_regs =
+	    (struct ql3xxx_host_memory_registers *)port_regs;
+	u32 delay = 10;
+	int status = 0;
+
+	if(ql_mii_setup(qdev))
+		return -1;
+
+	/* Bring out PHY out of reset */
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    (ISP_SERIAL_PORT_IF_WE |
+			     (ISP_SERIAL_PORT_IF_WE << 16)));
+
+	qdev->port_link_state = LS_DOWN;
+	netif_carrier_off(qdev->ndev);
+
+	/* V2 chip fix for ARS-39168. */
+	ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
+			    (ISP_SERIAL_PORT_IF_SDE |
+			     (ISP_SERIAL_PORT_IF_SDE << 16)));
+
+	/* Request Queue Registers */
+	*((u32 *) (qdev->preq_consumer_index)) = 0;
+	atomic_set(&qdev->tx_count,NUM_REQ_Q_ENTRIES);
+	qdev->req_producer_index = 0;
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->reqConsumerIndexAddrHigh,
+			   qdev->req_consumer_index_phy_addr_high);
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->reqConsumerIndexAddrLow,
+			   qdev->req_consumer_index_phy_addr_low);
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->reqBaseAddrHigh,
+			   MS_64BITS(qdev->req_q_phy_addr));
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->reqBaseAddrLow,
+			   LS_64BITS(qdev->req_q_phy_addr));
+	ql_write_page1_reg(qdev, &hmem_regs->reqLength, NUM_REQ_Q_ENTRIES);
+
+	/* Response Queue Registers */
+	*((u16 *) (qdev->prsp_producer_index)) = 0;
+	qdev->rsp_consumer_index = 0;
+	qdev->rsp_current = qdev->rsp_q_virt_addr;
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rspProducerIndexAddrHigh,
+			   qdev->rsp_producer_index_phy_addr_high);
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rspProducerIndexAddrLow,
+			   qdev->rsp_producer_index_phy_addr_low);
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rspBaseAddrHigh,
+			   MS_64BITS(qdev->rsp_q_phy_addr));
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rspBaseAddrLow,
+			   LS_64BITS(qdev->rsp_q_phy_addr));
+
+	ql_write_page1_reg(qdev, &hmem_regs->rspLength, NUM_RSP_Q_ENTRIES);
+
+	/* Large Buffer Queue */
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rxLargeQBaseAddrHigh,
+			   MS_64BITS(qdev->lrg_buf_q_phy_addr));
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rxLargeQBaseAddrLow,
+			   LS_64BITS(qdev->lrg_buf_q_phy_addr));
+
+	ql_write_page1_reg(qdev, &hmem_regs->rxLargeQLength, NUM_LBUFQ_ENTRIES);
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rxLargeBufferLength,
+			   qdev->lrg_buffer_len);
+
+	/* Small Buffer Queue */
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rxSmallQBaseAddrHigh,
+			   MS_64BITS(qdev->small_buf_q_phy_addr));
+
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rxSmallQBaseAddrLow,
+			   LS_64BITS(qdev->small_buf_q_phy_addr));
+
+	ql_write_page1_reg(qdev, &hmem_regs->rxSmallQLength, NUM_SBUFQ_ENTRIES);
+	ql_write_page1_reg(qdev,
+			   &hmem_regs->rxSmallBufferLength,
+			   QL_SMALL_BUFFER_SIZE);
+
+	qdev->small_buf_q_producer_index = NUM_SBUFQ_ENTRIES - 1;
+	qdev->small_buf_release_cnt = 8;
+	qdev->lrg_buf_q_producer_index = NUM_LBUFQ_ENTRIES - 1;
+	qdev->lrg_buf_release_cnt = 8;
+	qdev->lrg_buf_next_free =
+	    (struct bufq_addr_element *)qdev->lrg_buf_q_virt_addr;
+	qdev->small_buf_index = 0;
+	qdev->lrg_buf_index = 0;
+	qdev->lrg_buf_free_count = 0;
+	qdev->lrg_buf_free_head = NULL;
+	qdev->lrg_buf_free_tail = NULL;
+
+	ql_write_common_reg(qdev,
+			    (u32 *) & port_regs->CommonRegs.
+			    rxSmallQProducerIndex,
+			    qdev->small_buf_q_producer_index);
+	ql_write_common_reg(qdev,
+			    (u32 *) & port_regs->CommonRegs.
+			    rxLargeQProducerIndex,
+			    qdev->lrg_buf_q_producer_index);
+
+	/*
+	 * Find out if the chip has already been initialized.  If it has, then
+	 * we skip some of the initialization.
+	 */
+	clear_bit(QL_LINK_MASTER, &qdev->flags);
+	value = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	if ((value & PORT_STATUS_IC) == 0) {
+
+		/* Chip has not been configured yet, so let it rip. */
+		if(ql_init_misc_registers(qdev)) {
+			status = -1;
+			goto out;
+		}
+
+		if (qdev->mac_index)
+			ql_write_page0_reg(qdev,
+					   &port_regs->mac1MaxFrameLengthReg,
+					   qdev->max_frame_size);
+		else
+			ql_write_page0_reg(qdev,
+					   &port_regs->mac0MaxFrameLengthReg,
+					   qdev->max_frame_size);
+
+		value = qdev->nvram_data.tcpMaxWindowSize;
+		ql_write_page0_reg(qdev, &port_regs->tcpMaxWindow, value);
+
+		value = (0xFFFF << 16) | qdev->nvram_data.extHwConfig;
+
+		if(ql_sem_spinlock(qdev, QL_FLASH_SEM_MASK,
+				(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index)
+				 * 2) << 13)) {
+			status = -1;
+			goto out;
+		}
+		ql_write_page0_reg(qdev, &port_regs->ExternalHWConfig, value);
+		ql_write_page0_reg(qdev, &port_regs->InternalChipConfig,
+				   (((INTERNAL_CHIP_SD | INTERNAL_CHIP_WE) <<
+				     16) | (INTERNAL_CHIP_SD |
+					    INTERNAL_CHIP_WE)));
+		ql_sem_unlock(qdev, QL_FLASH_SEM_MASK);
+	}
+
+
+	if(ql_sem_spinlock(qdev, QL_PHY_GIO_SEM_MASK,
+			(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index) *
+			 2) << 7)) {
+		status = -1;
+		goto out;
+	}
+
+	ql_init_scan_mode(qdev);
+	ql_get_phy_owner(qdev);
+
+	/* Load the MAC Configuration */
+
+	/* Program lower 32 bits of the MAC address */
+	ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
+			   (MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16));
+	ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
+			   ((qdev->ndev->dev_addr[2] << 24)
+			    | (qdev->ndev->dev_addr[3] << 16)
+			    | (qdev->ndev->dev_addr[4] << 8)
+			    | qdev->ndev->dev_addr[5]));
+
+	/* Program top 16 bits of the MAC address */
+	ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
+			   ((MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16) | 1));
+	ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
+			   ((qdev->ndev->dev_addr[0] << 8)
+			    | qdev->ndev->dev_addr[1]));
+
+	/* Enable Primary MAC */
+	ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
+			   ((MAC_ADDR_INDIRECT_PTR_REG_PE << 16) |
+			    MAC_ADDR_INDIRECT_PTR_REG_PE));
+
+	/* Clear Primary and Secondary IP addresses */
+	ql_write_page0_reg(qdev, &port_regs->ipAddrIndexReg,
+			   ((IP_ADDR_INDEX_REG_MASK << 16) |
+			    (qdev->mac_index << 2)));
+	ql_write_page0_reg(qdev, &port_regs->ipAddrDataReg, 0);
+
+	ql_write_page0_reg(qdev, &port_regs->ipAddrIndexReg,
+			   ((IP_ADDR_INDEX_REG_MASK << 16) |
+			    ((qdev->mac_index << 2) + 1)));
+	ql_write_page0_reg(qdev, &port_regs->ipAddrDataReg, 0);
+
+	ql_sem_unlock(qdev, QL_PHY_GIO_SEM_MASK);
+
+	/* Indicate Configuration Complete */
+	ql_write_page0_reg(qdev,
+			   &port_regs->portControl,
+			   ((PORT_CONTROL_CC << 16) | PORT_CONTROL_CC));
+
+	do {
+		value = ql_read_page0_reg(qdev, &port_regs->portStatus);
+		if (value & PORT_STATUS_IC)
+			break;
+		msleep(500);
+	} while (--delay);
+
+	if (delay == 0) {
+		printk(KERN_ERR PFX
+		       "%s: Hw Initialization timeout.\n", qdev->ndev->name);
+		status = -1;
+		goto out;
+	}
+
+	/* Enable Ethernet Function */
+	value =
+	    (PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI |
+	     PORT_CONTROL_HH);
+	ql_write_page0_reg(qdev, &port_regs->portControl,
+			   ((value << 16) | value));
+
+out:
+	return status;
+}
+
+/*
+ * Caller holds hw_lock.
+ */
+static int ql_adapter_reset(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	int status = 0;
+	u16 value;
+	int max_wait_time;
+
+	set_bit(QL_RESET_ACTIVE, &qdev->flags);
+	clear_bit(QL_RESET_DONE, &qdev->flags);
+
+	/*
+	 * Issue soft reset to chip.
+	 */
+	printk(KERN_DEBUG PFX
+	       "%s: Issue soft reset to chip.\n",
+	       qdev->ndev->name);
+	ql_write_common_reg(qdev,
+			    (u32 *) & port_regs->CommonRegs.ispControlStatus,
+			    ((ISP_CONTROL_SR << 16) | ISP_CONTROL_SR));
+
+	/* Wait 3 seconds for reset to complete. */
+	printk(KERN_DEBUG PFX
+	       "%s: Wait 10 milliseconds for reset to complete.\n",
+	       qdev->ndev->name);
+
+	/* Wait until the firmware tells us the Soft Reset is done */
+	max_wait_time = 5;
+	do {
+		value =
+		    ql_read_common_reg(qdev,
+				       &port_regs->CommonRegs.ispControlStatus);
+		if ((value & ISP_CONTROL_SR) == 0)
+			break;
+
+		ssleep(1);
+	} while ((--max_wait_time));
+
+	/*
+	 * Also, make sure that the Network Reset Interrupt bit has been
+	 * cleared after the soft reset has taken place.
+	 */
+	value =
+	    ql_read_common_reg(qdev, &port_regs->CommonRegs.ispControlStatus);
+	if (value & ISP_CONTROL_RI) {
+		printk(KERN_DEBUG PFX
+		       "ql_adapter_reset: clearing RI after reset.\n");
+		ql_write_common_reg(qdev,
+				    (u32 *) & port_regs->CommonRegs.
+				    ispControlStatus,
+				    ((ISP_CONTROL_RI << 16) | ISP_CONTROL_RI));
+	}
+
+	if (max_wait_time == 0) {
+		/* Issue Force Soft Reset */
+		ql_write_common_reg(qdev,
+				    (u32 *) & port_regs->CommonRegs.
+				    ispControlStatus,
+				    ((ISP_CONTROL_FSR << 16) |
+				     ISP_CONTROL_FSR));
+		/*
+		 * Wait until the firmware tells us the Force Soft Reset is
+		 * done
+		 */
+		max_wait_time = 5;
+		do {
+			value =
+			    ql_read_common_reg(qdev,
+					       &port_regs->CommonRegs.
+					       ispControlStatus);
+			if ((value & ISP_CONTROL_FSR) == 0) {
+				break;
+			}
+			ssleep(1);
+		} while ((--max_wait_time));
+	}
+	if (max_wait_time == 0)
+		status = 1;
+
+	clear_bit(QL_RESET_ACTIVE, &qdev->flags);
+	set_bit(QL_RESET_DONE, &qdev->flags);
+	return status;
+}
+
+static void ql_set_mac_info(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	u32 value, port_status;
+	u8 func_number;
+
+	/* Get the function number */
+	value =
+	    ql_read_common_reg_l(qdev, &port_regs->CommonRegs.ispControlStatus);
+	func_number = (u8) ((value >> 4) & OPCODE_FUNC_ID_MASK);
+	port_status = ql_read_page0_reg(qdev, &port_regs->portStatus);
+	switch (value & ISP_CONTROL_FN_MASK) {
+	case ISP_CONTROL_FN0_NET:
+		qdev->mac_index = 0;
+		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
+		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
+		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
+		qdev->mb_bit_mask = FN0_MA_BITS_MASK;
+		qdev->PHYAddr = PORT0_PHY_ADDRESS;
+		if (port_status & PORT_STATUS_SM0)
+			set_bit(QL_LINK_OPTICAL,&qdev->flags);
+		else
+			clear_bit(QL_LINK_OPTICAL,&qdev->flags);
+		break;
+
+	case ISP_CONTROL_FN1_NET:
+		qdev->mac_index = 1;
+		qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number;
+		qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number;
+		qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number;
+		qdev->mb_bit_mask = FN1_MA_BITS_MASK;
+		qdev->PHYAddr = PORT1_PHY_ADDRESS;
+		if (port_status & PORT_STATUS_SM1)
+			set_bit(QL_LINK_OPTICAL,&qdev->flags);
+		else
+			clear_bit(QL_LINK_OPTICAL,&qdev->flags);
+		break;
+
+	case ISP_CONTROL_FN0_SCSI:
+	case ISP_CONTROL_FN1_SCSI:
+	default:
+		printk(KERN_DEBUG PFX
+		       "%s: Invalid function number, ispControlStatus = 0x%x\n",
+		       qdev->ndev->name,value);
+		break;
+	}
+	qdev->numPorts = qdev->nvram_data.numPorts;
+}
+
+static void ql_display_dev_info(struct net_device *ndev)
+{
+	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct pci_dev *pdev = qdev->pdev;
+
+	printk(KERN_INFO PFX
+	       "\n%s Adapter %d RevisionID %d found on PCI slot %d.\n",
+	       DRV_NAME, qdev->index, qdev->chip_rev_id, qdev->pci_slot);
+	printk(KERN_INFO PFX
+	       "%s Interface.\n",
+	       test_bit(QL_LINK_OPTICAL,&qdev->flags) ? "OPTICAL" : "COPPER");
+
+	/*
+	 * Print PCI bus width/type.
+	 */
+	printk(KERN_INFO PFX
+	       "Bus interface is %s %s.\n",
+	       ((qdev->pci_width == 64) ? "64-bit" : "32-bit"),
+	       ((qdev->pci_x) ? "PCI-X" : "PCI"));
+
+	printk(KERN_INFO PFX
+	       "mem  IO base address adjusted = 0x%p\n",
+	       qdev->mem_map_registers);
+	printk(KERN_INFO PFX "Interrupt number = %d\n", pdev->irq);
+
+	if (netif_msg_probe(qdev))
+		printk(KERN_INFO PFX
+		       "%s: MAC address %02x:%02x:%02x:%02x:%02x:%02x\n",
+		       ndev->name, ndev->dev_addr[0], ndev->dev_addr[1],
+		       ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4],
+		       ndev->dev_addr[5]);
+}
+
+static int ql_adapter_down(struct ql3_adapter *qdev, int do_reset)
+{
+	struct net_device *ndev = qdev->ndev;
+	int retval = 0;
+
+	netif_stop_queue(ndev);
+	netif_carrier_off(ndev);
+
+	clear_bit(QL_ADAPTER_UP,&qdev->flags);
+	clear_bit(QL_LINK_MASTER,&qdev->flags);
+
+	ql_disable_interrupts(qdev);
+
+	free_irq(qdev->pdev->irq, ndev);
+
+	if (qdev->msi && test_bit(QL_MSI_ENABLED,&qdev->flags)) {
+		printk(KERN_INFO PFX
+		       "%s: calling pci_disable_msi().\n", qdev->ndev->name);
+		clear_bit(QL_MSI_ENABLED,&qdev->flags);
+		pci_disable_msi(qdev->pdev);
+	}
+
+	del_timer_sync(&qdev->adapter_timer);
+
+	netif_poll_disable(ndev);
+
+	if (do_reset) {
+		int soft_reset;
+		unsigned long hw_flags;
+
+		spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+		if (ql_wait_for_drvr_lock(qdev)) {
+			if ((soft_reset = ql_adapter_reset(qdev))) {
+				printk(KERN_ERR PFX
+				       "%s: ql_adapter_reset(%d) FAILED!\n",
+				       ndev->name, qdev->index);
+			}
+			printk(KERN_ERR PFX
+				"%s: Releaseing driver lock via chip reset.\n",ndev->name);
+		} else {
+			printk(KERN_ERR PFX
+			       "%s: Could not acquire driver lock to do "
+			       "reset!\n", ndev->name);
+			retval = -1;
+		}
+		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+	}
+	ql_free_mem_resources(qdev);
+	return retval;
+}
+
+static int ql_adapter_up(struct ql3_adapter *qdev)
+{
+	struct net_device *ndev = qdev->ndev;
+	int err;
+	unsigned long irq_flags = SA_SAMPLE_RANDOM | SA_SHIRQ;
+	unsigned long hw_flags;
+
+	if (ql_alloc_mem_resources(qdev)) {
+		printk(KERN_ERR PFX
+		       "%s Unable to  allocate buffers.\n", ndev->name);
+		return -ENOMEM;
+	}
+
+	if (qdev->msi) {
+		if (pci_enable_msi(qdev->pdev)) {
+			printk(KERN_ERR PFX
+			       "%s: User requested MSI, but MSI failed to "
+			       "initialize.  Continuing without MSI.\n",
+			       qdev->ndev->name);
+			qdev->msi = 0;
+		} else {
+			printk(KERN_INFO PFX "%s: MSI Enabled...\n", qdev->ndev->name);
+			set_bit(QL_MSI_ENABLED,&qdev->flags);
+			irq_flags &= ~SA_SHIRQ;
+		}
+	}
+
+	if ((err = request_irq(qdev->pdev->irq,
+			       ql3xxx_isr,
+			       irq_flags, ndev->name, ndev))) {
+		printk(KERN_ERR PFX
+		       "%s: Failed to reserve interrupt %d already in use.\n",
+		       ndev->name, qdev->pdev->irq);
+		goto err_irq;
+	}
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+
+	if ((err = ql_wait_for_drvr_lock(qdev))) {
+		if ((err = ql_adapter_initialize(qdev))) {
+			printk(KERN_ERR PFX
+			       "%s: Unable to initialize adapter.\n",
+			       ndev->name);
+			goto err_init;
+		}
+		printk(KERN_ERR PFX
+				"%s: Releaseing driver lock.\n",ndev->name);
+		ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
+	} else {
+		printk(KERN_ERR PFX
+		       "%s: Could not aquire driver lock.\n",
+		       ndev->name);
+		goto err_lock;
+	}
+
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+	set_bit(QL_ADAPTER_UP,&qdev->flags);
+
+	mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
+
+	netif_poll_enable(ndev);
+	ql_enable_interrupts(qdev);
+	return 0;
+
+err_init:
+	ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
+err_lock:
+	free_irq(qdev->pdev->irq, ndev);
+err_irq:
+	if (qdev->msi && test_bit(QL_MSI_ENABLED,&qdev->flags)) {
+		printk(KERN_INFO PFX
+		       "%s: calling pci_disable_msi().\n",
+		       qdev->ndev->name);
+		clear_bit(QL_MSI_ENABLED,&qdev->flags);
+		pci_disable_msi(qdev->pdev);
+	}
+	return err;
+}
+
+static int ql_cycle_adapter(struct ql3_adapter *qdev, int reset)
+{
+	if( ql_adapter_down(qdev,reset) || ql_adapter_up(qdev)) {
+		printk(KERN_ERR PFX
+				"%s: Driver up/down cycle failed, "
+				"closing device\n",qdev->ndev->name);
+		dev_close(qdev->ndev);
+		return -1;
+	}
+	return 0;
+}
+
+static int ql3xxx_close(struct net_device *ndev)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+
+	/*
+	 * Wait for device to recover from a reset.
+	 * (Rarely happens, but possible.)
+	 */
+	while (!test_bit(QL_ADAPTER_UP,&qdev->flags))
+		msleep(50);
+
+	ql_adapter_down(qdev,QL_DO_RESET);
+	return 0;
+}
+
+static int ql3xxx_open(struct net_device *ndev)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	return (ql_adapter_up(qdev));
+}
+
+static struct net_device_stats *ql3xxx_get_stats(struct net_device *dev)
+{
+	struct ql3_adapter *qdev = (struct ql3_adapter *)dev->priv;
+	return &qdev->stats;
+}
+
+static int ql3xxx_change_mtu(struct net_device *ndev, int new_mtu)
+{
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+	printk(KERN_ERR PFX "%s:  new mtu size = %d.\n", ndev->name, new_mtu);
+	if (new_mtu != NORMAL_MTU_SIZE && new_mtu != JUMBO_MTU_SIZE) {
+		printk(KERN_ERR PFX
+		       "%s: mtu size of %d is not valid.  Use exactly %d or "
+		       "%d.\n", ndev->name, new_mtu, NORMAL_MTU_SIZE,
+		       JUMBO_MTU_SIZE);
+		return -EINVAL;
+	}
+
+	if (!netif_running(ndev)) {
+		ndev->mtu = new_mtu;
+		return 0;
+	}
+
+	ndev->mtu = new_mtu;
+	return ql_cycle_adapter(qdev,QL_DO_RESET);
+}
+
+static void ql3xxx_set_multicast_list(struct net_device *ndev)
+{
+	/*
+	 * We are manually parsing the list in the net_device structure.
+	 */
+	return;
+}
+
+static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
+{
+	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct ql3xxx_port_registers __iomem *port_regs =
+	    		qdev->mem_map_registers;
+	struct sockaddr *addr = p;
+	unsigned long hw_flags;
+
+	if (netif_running(ndev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
+
+	spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+	/* Program lower 32 bits of the MAC address */
+	ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
+			   (MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16));
+	ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
+			   ((ndev->dev_addr[2] << 24) | (ndev->
+							 dev_addr[3] << 16) |
+			    (ndev->dev_addr[4] << 8) | ndev->dev_addr[5]));
+
+	/* Program top 16 bits of the MAC address */
+	ql_write_page0_reg(qdev, &port_regs->macAddrIndirectPtrReg,
+			   ((MAC_ADDR_INDIRECT_PTR_REG_RP_MASK << 16) | 1));
+	ql_write_page0_reg(qdev, &port_regs->macAddrDataReg,
+			   ((ndev->dev_addr[0] << 8) | ndev->dev_addr[1]));
+	spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+	return 0;
+}
+
+static void ql3xxx_tx_timeout(struct net_device *ndev)
+{
+	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+
+	printk(KERN_ERR PFX "%s: Resetting...\n", ndev->name);
+	/*
+	 * Stop the queues, we've got a problem.
+	 */
+	netif_stop_queue(ndev);
+
+	/*
+	 * Wake up the worker to process this event.
+	 */
+	queue_work(qdev->workqueue, &qdev->tx_timeout_work);
+}
+
+static void ql_reset_work(struct ql3_adapter *qdev)
+{
+	struct net_device *ndev = qdev->ndev;
+	u32 value;
+	struct ql_tx_buf_cb *tx_cb;
+	int max_wait_time, i;
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	unsigned long hw_flags;
+
+	if (test_bit((QL_RESET_PER_SCSI | QL_RESET_START),&qdev->flags)) {
+		clear_bit(QL_LINK_MASTER,&qdev->flags);
+
+		/*
+		 * Loop through the active list and return the skb.
+		 */
+		for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
+			tx_cb = &qdev->tx_buf[i];
+			if (tx_cb->skb) {
+
+				printk(KERN_DEBUG PFX
+				       "%s: Freeing lost SKB.\n",
+				       qdev->ndev->name);
+				pci_unmap_single(qdev->pdev,
+					pci_unmap_addr(tx_cb, mapaddr),
+					pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE);
+				dev_kfree_skb(tx_cb->skb);
+				tx_cb->skb = NULL;
+			}
+		}
+
+		printk(KERN_ERR PFX
+		       "%s: Clearing NRI after reset.\n", qdev->ndev->name);
+		spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+		ql_write_common_reg(qdev,
+				    &port_regs->CommonRegs.
+				    ispControlStatus,
+				    ((ISP_CONTROL_RI << 16) | ISP_CONTROL_RI));
+		/*
+		 * Wait the for Soft Reset to Complete.
+		 */
+		max_wait_time = 10;
+		do {
+			value = ql_read_common_reg(qdev,
+						   &port_regs->CommonRegs.
+
+						   ispControlStatus);
+			if ((value & ISP_CONTROL_SR) == 0) {
+				printk(KERN_DEBUG PFX
+				       "%s: reset completed.\n",
+				       qdev->ndev->name);
+				break;
+			}
+
+			if (value & ISP_CONTROL_RI) {
+				printk(KERN_DEBUG PFX
+				       "%s: clearing NRI after reset.\n",
+				       qdev->ndev->name);
+				ql_write_common_reg(qdev,
+						    (u32 *) &
+						    port_regs->
+						    CommonRegs.
+						    ispControlStatus,
+						    ((ISP_CONTROL_RI <<
+						      16) | ISP_CONTROL_RI));
+			}
+
+			ssleep(1);
+		} while (--max_wait_time);
+		spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+		if (value & ISP_CONTROL_SR) {
+
+			/*
+			 * Set the reset flags and clear the board again.
+			 * Nothing else to do...
+			 */
+			printk(KERN_ERR PFX
+			       "%s: Timed out waiting for reset to "
+			       "complete.\n", ndev->name);
+			printk(KERN_ERR PFX
+			       "%s: Do a reset.\n", ndev->name);
+			clear_bit(QL_RESET_PER_SCSI,&qdev->flags);
+			clear_bit(QL_RESET_START,&qdev->flags);
+			ql_cycle_adapter(qdev,QL_DO_RESET);
+			return;
+		}
+
+		clear_bit(QL_RESET_ACTIVE,&qdev->flags);
+		clear_bit(QL_RESET_PER_SCSI,&qdev->flags);
+		clear_bit(QL_RESET_START,&qdev->flags);
+		ql_cycle_adapter(qdev,QL_NO_RESET);
+	}
+}
+
+static void ql_tx_timeout_work(struct ql3_adapter *qdev)
+{
+	ql_cycle_adapter(qdev,QL_DO_RESET);
+}
+
+static void ql_get_board_info(struct ql3_adapter *qdev)
+{
+	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
+	u32 value;
+
+	value = ql_read_page0_reg_l(qdev, &port_regs->portStatus);
+
+	qdev->chip_rev_id = ((value & PORT_STATUS_REV_ID_MASK) >> 12);
+	if (value & PORT_STATUS_64)
+		qdev->pci_width = 64;
+	else
+		qdev->pci_width = 32;
+	if (value & PORT_STATUS_X)
+		qdev->pci_x = 1;
+	else
+		qdev->pci_x = 0;
+	qdev->pci_slot = (u8) PCI_SLOT(qdev->pdev->devfn);
+}
+
+static void ql3xxx_timer(unsigned long ptr)
+{
+	struct ql3_adapter *qdev = (struct ql3_adapter *)ptr;
+
+	if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) {
+		printk(KERN_DEBUG PFX
+		       "%s: Reset in progress.\n",
+		       qdev->ndev->name);
+		goto end;
+	}
+
+	ql_link_state_machine(qdev);
+
+	/* Restart timer on 2 second interval. */
+end:
+	mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
+}
+
+static int __devinit ql3xxx_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *pci_entry)
+{
+	struct net_device *ndev = NULL;
+	struct ql3_adapter *qdev = NULL;
+	static int cards_found = 0;
+	int pci_using_dac, err;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR PFX "%s cannot enable PCI device\n",
+		       pci_name(pdev));
+		goto err_out;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
+		       pci_name(pdev));
+		goto err_out_disable_pdev;
+	}
+
+	pci_set_master(pdev);
+
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+		pci_using_dac = 1;
+		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+	} else if (!(err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+		pci_using_dac = 0;
+		err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	}
+
+	if (err) {
+		printk(KERN_ERR PFX "%s no usable DMA configuration\n",
+		       pci_name(pdev));
+		goto err_out_free_regions;
+	}
+
+	ndev = alloc_etherdev(sizeof(struct ql3_adapter));
+	if (!ndev)
+		goto err_out_free_regions;
+
+	SET_MODULE_OWNER(ndev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	ndev->features = NETIF_F_LLTX;
+	if (pci_using_dac)
+		ndev->features |= NETIF_F_HIGHDMA;
+
+	pci_set_drvdata(pdev, ndev);
+
+	qdev = netdev_priv(ndev);
+	qdev->index = cards_found;
+	qdev->ndev = ndev;
+	qdev->pdev = pdev;
+	qdev->port_link_state = LS_DOWN;
+	if (msi)
+		qdev->msi = 1;
+
+	qdev->msg_enable = netif_msg_init(debug, default_msg);
+
+	qdev->mem_map_registers =
+	    ioremap_nocache(pci_resource_start(pdev, 1),
+			    pci_resource_len(qdev->pdev, 1));
+	if (!qdev->mem_map_registers) {
+		printk(KERN_ERR PFX "%s: cannot map device registers\n",
+		       pci_name(pdev));
+		goto err_out_free_ndev;
+	}
+
+	spin_lock_init(&qdev->adapter_lock);
+	spin_lock_init(&qdev->hw_lock);
+
+	/* Set driver entry points */
+	ndev->open = ql3xxx_open;
+	ndev->hard_start_xmit = ql3xxx_send;
+	ndev->stop = ql3xxx_close;
+	ndev->get_stats = ql3xxx_get_stats;
+	ndev->change_mtu = ql3xxx_change_mtu;
+	ndev->set_multicast_list = ql3xxx_set_multicast_list;
+	SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops);
+	ndev->set_mac_address = ql3xxx_set_mac_address;
+	ndev->tx_timeout = ql3xxx_tx_timeout;
+	ndev->watchdog_timeo = 5 * HZ;
+
+	ndev->poll = &ql_poll;
+	ndev->weight = 64;
+
+	ndev->irq = pdev->irq;
+
+	/* make sure the EEPROM is good */
+	if (ql_get_nvram_params(qdev)) {
+		printk(KERN_ALERT PFX
+		       "ql3xxx_probe: Adapter #%d, Invalid NVRAM parameters.\n",
+		       qdev->index);
+		goto err_out_iounmap;
+	}
+
+	ql_set_mac_info(qdev);
+
+	/* Validate and set parameters */
+	if (qdev->mac_index) {
+		memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn2.macAddress,
+		       ETH_ALEN);
+	} else {
+		memcpy(ndev->dev_addr, &qdev->nvram_data.funcCfg_fn0.macAddress,
+		       ETH_ALEN);
+	}
+	memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
+
+	ndev->tx_queue_len = NUM_REQ_Q_ENTRIES;
+
+	/* Turn off support for multicasting */
+	ndev->flags &= ~IFF_MULTICAST;
+
+	/* Record PCI bus information. */
+	ql_get_board_info(qdev);
+
+	/*
+	 * Set the Maximum Memory Read Byte Count value. We do this to handle
+	 * jumbo frames.
+	 */
+	if (qdev->pci_x) {
+		pci_write_config_word(pdev, (int)0x4e, (u16) 0x0036);
+	}
+
+	err = register_netdev(ndev);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cannot register net device\n",
+		       pci_name(pdev));
+		goto err_out_iounmap;
+	}
+
+	/* we're going to reset, so assume we have no link for now */
+
+	netif_carrier_off(ndev);
+	netif_stop_queue(ndev);
+
+	qdev->workqueue = create_singlethread_workqueue(ndev->name);
+	INIT_WORK(&qdev->reset_work, (void (*)(void *))ql_reset_work, qdev);
+	INIT_WORK(&qdev->tx_timeout_work,
+		  (void (*)(void *))ql_tx_timeout_work, qdev);
+
+	init_timer(&qdev->adapter_timer);
+	qdev->adapter_timer.function = ql3xxx_timer;
+	qdev->adapter_timer.expires = jiffies + HZ * 2;	/* two second delay */
+	qdev->adapter_timer.data = (unsigned long)qdev;
+
+	if(!cards_found) {
+		printk(KERN_ALERT PFX "%s\n", DRV_STRING);
+		printk(KERN_ALERT PFX "Driver name: %s, Version: %s.\n",
+	    	   DRV_NAME, DRV_VERSION);
+	}
+	ql_display_dev_info(ndev);
+
+	cards_found++;
+	return 0;
+
+err_out_iounmap:
+	iounmap(qdev->mem_map_registers);
+err_out_free_ndev:
+	free_netdev(ndev);
+err_out_free_regions:
+	pci_release_regions(pdev);
+err_out_disable_pdev:
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+err_out:
+	return err;
+}
+
+static void __devexit ql3xxx_remove(struct pci_dev *pdev)
+{
+	struct net_device *ndev = pci_get_drvdata(pdev);
+	struct ql3_adapter *qdev = netdev_priv(ndev);
+
+	unregister_netdev(ndev);
+	qdev = netdev_priv(ndev);
+
+	ql_disable_interrupts(qdev);
+
+	if (qdev->workqueue) {
+		cancel_delayed_work(&qdev->reset_work);
+		cancel_delayed_work(&qdev->tx_timeout_work);
+		destroy_workqueue(qdev->workqueue);
+		qdev->workqueue = NULL;
+	}
+
+	iounmap((void *)qdev->mmap_virt_base);
+	pci_release_regions(pdev);
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(ndev);
+}
+
+static struct pci_driver ql3xxx_driver = {
+
+	.name = DRV_NAME,
+	.id_table = ql3xxx_pci_tbl,
+	.probe = ql3xxx_probe,
+	.remove = __devexit_p(ql3xxx_remove),
+};
+
+static int __init ql3xxx_init_module(void)
+{
+	return pci_register_driver(&ql3xxx_driver);
+}
+
+static void __exit ql3xxx_exit(void)
+{
+	pci_unregister_driver(&ql3xxx_driver);
+}
+
+module_init(ql3xxx_init_module);
+module_exit(ql3xxx_exit);
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
new file mode 100644
index 0000000..9492cee
--- /dev/null
+++ b/drivers/net/qla3xxx.h
@@ -0,0 +1,1194 @@
+/*
+ * QLogic QLA3xxx NIC HBA Driver
+ * Copyright (c)  2003-2006 QLogic Corporation
+ *
+ * See LICENSE.qla3xxx for copyright and licensing details.
+ */
+#ifndef _QLA3XXX_H_
+#define _QLA3XXX_H_
+
+/*
+ * IOCB Definitions...
+ */
+#pragma pack(1)
+
+#define OPCODE_OB_MAC_IOCB_FN0          0x01
+#define OPCODE_OB_MAC_IOCB_FN2          0x21
+#define OPCODE_OB_TCP_IOCB_FN0          0x03
+#define OPCODE_OB_TCP_IOCB_FN2          0x23
+#define OPCODE_UPDATE_NCB_IOCB_FN0      0x00
+#define OPCODE_UPDATE_NCB_IOCB_FN2      0x20
+
+#define OPCODE_UPDATE_NCB_IOCB      0xF0
+#define OPCODE_IB_MAC_IOCB          0xF9
+#define OPCODE_IB_IP_IOCB           0xFA
+#define OPCODE_IB_TCP_IOCB          0xFB
+#define OPCODE_DUMP_PROTO_IOCB      0xFE
+#define OPCODE_BUFFER_ALERT_IOCB    0xFB
+
+#define OPCODE_FUNC_ID_MASK                 0x30
+#define OUTBOUND_MAC_IOCB                   0x01	/* plus function bits */
+#define OUTBOUND_TCP_IOCB                   0x03	/* plus function bits */
+#define UPDATE_NCB_IOCB                     0x00	/* plus function bits */
+
+#define FN0_MA_BITS_MASK    0x00
+#define FN1_MA_BITS_MASK    0x80
+
+struct ob_mac_iocb_req {
+	u8 opcode;
+	u8 flags;
+#define OB_MAC_IOCB_REQ_MA  0xC0
+#define OB_MAC_IOCB_REQ_F   0x20
+#define OB_MAC_IOCB_REQ_X   0x10
+#define OB_MAC_IOCB_REQ_D   0x02
+#define OB_MAC_IOCB_REQ_I   0x01
+	__le16 reserved0;
+
+	__le32 transaction_id;
+	__le16 data_len;
+	__le16 reserved1;
+	__le32 reserved2;
+	__le32 reserved3;
+	__le32 buf_addr0_low;
+	__le32 buf_addr0_high;
+	__le32 buf_0_len;
+	__le32 buf_addr1_low;
+	__le32 buf_addr1_high;
+	__le32 buf_1_len;
+	__le32 buf_addr2_low;
+	__le32 buf_addr2_high;
+	__le32 buf_2_len;
+	__le32 reserved4;
+	__le32 reserved5;
+};
+/*
+ * The following constants define control bits for buffer
+ * length fields for all IOCB's.
+ */
+#define OB_MAC_IOCB_REQ_E   0x80000000	/* Last valid buffer in list. */
+#define OB_MAC_IOCB_REQ_C   0x40000000	/* points to an OAL. (continuation) */
+#define OB_MAC_IOCB_REQ_L   0x20000000	/* Auburn local address pointer. */
+#define OB_MAC_IOCB_REQ_R   0x10000000	/* 32-bit address pointer. */
+
+struct ob_mac_iocb_rsp {
+	u8 opcode;
+	u8 flags;
+#define OB_MAC_IOCB_RSP_P   0x08
+#define OB_MAC_IOCB_RSP_S   0x02
+#define OB_MAC_IOCB_RSP_I   0x01
+
+	__le16 reserved0;
+	__le32 transaction_id;
+	__le32 reserved1;
+	__le32 reserved2;
+};
+
+struct ib_mac_iocb_rsp {
+	u8 opcode;
+	u8 flags;
+#define IB_MAC_IOCB_RSP_S   0x80
+#define IB_MAC_IOCB_RSP_H1  0x40
+#define IB_MAC_IOCB_RSP_H0  0x20
+#define IB_MAC_IOCB_RSP_B   0x10
+#define IB_MAC_IOCB_RSP_M   0x08
+#define IB_MAC_IOCB_RSP_MA  0x07
+
+	__le16 length;
+	__le32 reserved;
+	__le32 ial_low;
+	__le32 ial_high;
+
+};
+
+struct ob_ip_iocb_req {
+	u8 opcode;
+	__le16 flags;
+#define OB_IP_IOCB_REQ_O        0x100
+#define OB_IP_IOCB_REQ_H        0x008
+#define OB_IP_IOCB_REQ_U        0x004
+#define OB_IP_IOCB_REQ_D        0x002
+#define OB_IP_IOCB_REQ_I        0x001
+
+	u8 reserved0;
+
+	__le32 transaction_id;
+	__le16 data_len;
+	__le16 reserved1;
+	__le32 hncb_ptr_low;
+	__le32 hncb_ptr_high;
+	__le32 buf_addr0_low;
+	__le32 buf_addr0_high;
+	__le32 buf_0_len;
+	__le32 buf_addr1_low;
+	__le32 buf_addr1_high;
+	__le32 buf_1_len;
+	__le32 buf_addr2_low;
+	__le32 buf_addr2_high;
+	__le32 buf_2_len;
+	__le32 reserved2;
+	__le32 reserved3;
+};
+
+/* defines for BufferLength fields above */
+#define OB_IP_IOCB_REQ_E    0x80000000
+#define OB_IP_IOCB_REQ_C    0x40000000
+#define OB_IP_IOCB_REQ_L    0x20000000
+#define OB_IP_IOCB_REQ_R    0x10000000
+
+struct ob_ip_iocb_rsp {
+	u8 opcode;
+	u8 flags;
+#define OB_MAC_IOCB_RSP_E       0x08
+#define OB_MAC_IOCB_RSP_L       0x04
+#define OB_MAC_IOCB_RSP_S       0x02
+#define OB_MAC_IOCB_RSP_I       0x01
+
+	__le16 reserved0;
+	__le32 transaction_id;
+	__le32 reserved1;
+	__le32 reserved2;
+};
+
+struct ob_tcp_iocb_req {
+	u8 opcode;
+
+	u8 flags0;
+#define OB_TCP_IOCB_REQ_P       0x80
+#define OB_TCP_IOCB_REQ_CI      0x20
+#define OB_TCP_IOCB_REQ_H       0x10
+#define OB_TCP_IOCB_REQ_LN      0x08
+#define OB_TCP_IOCB_REQ_K       0x04
+#define OB_TCP_IOCB_REQ_D       0x02
+#define OB_TCP_IOCB_REQ_I       0x01
+
+	u8 flags1;
+#define OB_TCP_IOCB_REQ_OSM     0x40
+#define OB_TCP_IOCB_REQ_URG     0x20
+#define OB_TCP_IOCB_REQ_ACK     0x10
+#define OB_TCP_IOCB_REQ_PSH     0x08
+#define OB_TCP_IOCB_REQ_RST     0x04
+#define OB_TCP_IOCB_REQ_SYN     0x02
+#define OB_TCP_IOCB_REQ_FIN     0x01
+
+	u8 options_len;
+#define OB_TCP_IOCB_REQ_OMASK   0xF0
+#define OB_TCP_IOCB_REQ_SHIFT   4
+
+	__le32 transaction_id;
+	__le32 data_len;
+	__le32 hncb_ptr_low;
+	__le32 hncb_ptr_high;
+	__le32 buf_addr0_low;
+	__le32 buf_addr0_high;
+	__le32 buf_0_len;
+	__le32 buf_addr1_low;
+	__le32 buf_addr1_high;
+	__le32 buf_1_len;
+	__le32 buf_addr2_low;
+	__le32 buf_addr2_high;
+	__le32 buf_2_len;
+	__le32 time_stamp;
+	__le32 reserved1;
+};
+
+struct ob_tcp_iocb_rsp {
+	u8 opcode;
+
+	u8 flags0;
+#define OB_TCP_IOCB_RSP_C       0x20
+#define OB_TCP_IOCB_RSP_H       0x10
+#define OB_TCP_IOCB_RSP_LN      0x08
+#define OB_TCP_IOCB_RSP_K       0x04
+#define OB_TCP_IOCB_RSP_D       0x02
+#define OB_TCP_IOCB_RSP_I       0x01
+
+	u8 flags1;
+#define OB_TCP_IOCB_RSP_E       0x10
+#define OB_TCP_IOCB_RSP_W       0x08
+#define OB_TCP_IOCB_RSP_P       0x04
+#define OB_TCP_IOCB_RSP_T       0x02
+#define OB_TCP_IOCB_RSP_F       0x01
+
+	u8 state;
+#define OB_TCP_IOCB_RSP_SMASK   0xF0
+#define OB_TCP_IOCB_RSP_SHIFT   4
+
+	__le32 transaction_id;
+	__le32 local_ncb_ptr;
+	__le32 reserved0;
+};
+
+struct ib_ip_iocb_rsp {
+	u8 opcode;
+	u8 flags;
+#define IB_IP_IOCB_RSP_S        0x80
+#define IB_IP_IOCB_RSP_H1       0x40
+#define IB_IP_IOCB_RSP_H0       0x20
+#define IB_IP_IOCB_RSP_B        0x10
+#define IB_IP_IOCB_RSP_M        0x08
+#define IB_IP_IOCB_RSP_MA       0x07
+
+	__le16 length;
+	__le16 checksum;
+	__le16 reserved;
+#define IB_IP_IOCB_RSP_R        0x01
+	__le32 ial_low;
+	__le32 ial_high;
+};
+
+struct ib_tcp_iocb_rsp {
+	u8 opcode;
+	u8 flags;
+#define IB_TCP_IOCB_RSP_P       0x80
+#define IB_TCP_IOCB_RSP_T       0x40
+#define IB_TCP_IOCB_RSP_D       0x20
+#define IB_TCP_IOCB_RSP_N       0x10
+#define IB_TCP_IOCB_RSP_IP      0x03
+#define IB_TCP_FLAG_MASK        0xf0
+#define IB_TCP_FLAG_IOCB_SYN    0x00
+
+#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK)
+
+	__le16 length;
+	__le32 hncb_ref_num;
+	__le32 ial_low;
+	__le32 ial_high;
+};
+
+struct net_rsp_iocb {
+	u8 opcode;
+	u8 flags;
+	__le16 reserved0;
+	__le32 reserved[3];
+};
+#pragma pack()
+
+/*
+ * Register Definitions...
+ */
+#define PORT0_PHY_ADDRESS   0x1e00
+#define PORT1_PHY_ADDRESS   0x1f00
+
+#define ETHERNET_CRC_SIZE   4
+
+#define MII_SCAN_REGISTER 0x00000001
+
+/* 32-bit ispControlStatus */
+enum {
+	ISP_CONTROL_NP_MASK = 0x0003,
+	ISP_CONTROL_NP_PCSR = 0x0000,
+	ISP_CONTROL_NP_HMCR = 0x0001,
+	ISP_CONTROL_NP_LRAMCR = 0x0002,
+	ISP_CONTROL_NP_PSR = 0x0003,
+	ISP_CONTROL_RI = 0x0008,
+	ISP_CONTROL_CI = 0x0010,
+	ISP_CONTROL_PI = 0x0020,
+	ISP_CONTROL_IN = 0x0040,
+	ISP_CONTROL_BE = 0x0080,
+	ISP_CONTROL_FN_MASK = 0x0700,
+	ISP_CONTROL_FN0_NET = 0x0400,
+	ISP_CONTROL_FN0_SCSI = 0x0500,
+	ISP_CONTROL_FN1_NET = 0x0600,
+	ISP_CONTROL_FN1_SCSI = 0x0700,
+	ISP_CONTROL_LINK_DN_0 = 0x0800,
+	ISP_CONTROL_LINK_DN_1 = 0x1000,
+	ISP_CONTROL_FSR = 0x2000,
+	ISP_CONTROL_FE = 0x4000,
+	ISP_CONTROL_SR = 0x8000,
+};
+
+/* 32-bit ispInterruptMaskReg */
+enum {
+	ISP_IMR_ENABLE_INT = 0x0004,
+	ISP_IMR_DISABLE_RESET_INT = 0x0008,
+	ISP_IMR_DISABLE_CMPL_INT = 0x0010,
+	ISP_IMR_DISABLE_PROC_INT = 0x0020,
+};
+
+/* 32-bit serialPortInterfaceReg */
+enum {
+	ISP_SERIAL_PORT_IF_CLK = 0x0001,
+	ISP_SERIAL_PORT_IF_CS = 0x0002,
+	ISP_SERIAL_PORT_IF_D0 = 0x0004,
+	ISP_SERIAL_PORT_IF_DI = 0x0008,
+	ISP_NVRAM_MASK = (0x000F << 16),
+	ISP_SERIAL_PORT_IF_WE = 0x0010,
+	ISP_SERIAL_PORT_IF_NVR_MASK = 0x001F,
+	ISP_SERIAL_PORT_IF_SCI = 0x0400,
+	ISP_SERIAL_PORT_IF_SC0 = 0x0800,
+	ISP_SERIAL_PORT_IF_SCE = 0x1000,
+	ISP_SERIAL_PORT_IF_SDI = 0x2000,
+	ISP_SERIAL_PORT_IF_SDO = 0x4000,
+	ISP_SERIAL_PORT_IF_SDE = 0x8000,
+	ISP_SERIAL_PORT_IF_I2C_MASK = 0xFC00,
+};
+
+/* semaphoreReg */
+enum {
+	QL_RESOURCE_MASK_BASE_CODE = 0x7,
+	QL_RESOURCE_BITS_BASE_CODE = 0x4,
+	QL_DRVR_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 1),
+	QL_DDR_RAM_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 4),
+	QL_PHY_GIO_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 7),
+	QL_NVRAM_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 10),
+	QL_FLASH_SEM_BITS = (QL_RESOURCE_BITS_BASE_CODE << 13),
+	QL_DRVR_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (1 + 16)),
+	QL_DDR_RAM_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (4 + 16)),
+	QL_PHY_GIO_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (7 + 16)),
+	QL_NVRAM_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (10 + 16)),
+	QL_FLASH_SEM_MASK = (QL_RESOURCE_MASK_BASE_CODE << (13 + 16)),
+};
+
+ /*
+  * QL3XXX memory-mapped registers
+  * QL3XXX has 4 "pages" of registers, each page occupying
+  * 256 bytes.  Each page has a "common" area at the start and then
+  * page-specific registers after that.
+  */
+struct ql3xxx_common_registers {
+	u32 MB0;		/* Offset 0x00 */
+	u32 MB1;		/* Offset 0x04 */
+	u32 MB2;		/* Offset 0x08 */
+	u32 MB3;		/* Offset 0x0c */
+	u32 MB4;		/* Offset 0x10 */
+	u32 MB5;		/* Offset 0x14 */
+	u32 MB6;		/* Offset 0x18 */
+	u32 MB7;		/* Offset 0x1c */
+	u32 flashBiosAddr;
+	u32 flashBiosData;
+	u32 ispControlStatus;
+	u32 ispInterruptMaskReg;
+	u32 serialPortInterfaceReg;
+	u32 semaphoreReg;
+	u32 reqQProducerIndex;
+	u32 rspQConsumerIndex;
+
+	u32 rxLargeQProducerIndex;
+	u32 rxSmallQProducerIndex;
+	u32 arcMadiCommand;
+	u32 arcMadiData;
+};
+
+enum {
+	EXT_HW_CONFIG_SP_MASK = 0x0006,
+	EXT_HW_CONFIG_SP_NONE = 0x0000,
+	EXT_HW_CONFIG_SP_BYTE_PARITY = 0x0002,
+	EXT_HW_CONFIG_SP_ECC = 0x0004,
+	EXT_HW_CONFIG_SP_ECCx = 0x0006,
+	EXT_HW_CONFIG_SIZE_MASK = 0x0060,
+	EXT_HW_CONFIG_SIZE_128M = 0x0000,
+	EXT_HW_CONFIG_SIZE_256M = 0x0020,
+	EXT_HW_CONFIG_SIZE_512M = 0x0040,
+	EXT_HW_CONFIG_SIZE_INVALID = 0x0060,
+	EXT_HW_CONFIG_PD = 0x0080,
+	EXT_HW_CONFIG_FW = 0x0200,
+	EXT_HW_CONFIG_US = 0x0400,
+	EXT_HW_CONFIG_DCS_MASK = 0x1800,
+	EXT_HW_CONFIG_DCS_9MA = 0x0000,
+	EXT_HW_CONFIG_DCS_15MA = 0x0800,
+	EXT_HW_CONFIG_DCS_18MA = 0x1000,
+	EXT_HW_CONFIG_DCS_24MA = 0x1800,
+	EXT_HW_CONFIG_DDS_MASK = 0x6000,
+	EXT_HW_CONFIG_DDS_9MA = 0x0000,
+	EXT_HW_CONFIG_DDS_15MA = 0x2000,
+	EXT_HW_CONFIG_DDS_18MA = 0x4000,
+	EXT_HW_CONFIG_DDS_24MA = 0x6000,
+};
+
+/* InternalChipConfig */
+enum {
+	INTERNAL_CHIP_DM = 0x0001,
+	INTERNAL_CHIP_SD = 0x0002,
+	INTERNAL_CHIP_RAP_MASK = 0x000C,
+	INTERNAL_CHIP_RAP_RR = 0x0000,
+	INTERNAL_CHIP_RAP_NRM = 0x0004,
+	INTERNAL_CHIP_RAP_ERM = 0x0008,
+	INTERNAL_CHIP_RAP_ERMx = 0x000C,
+	INTERNAL_CHIP_WE = 0x0010,
+	INTERNAL_CHIP_EF = 0x0020,
+	INTERNAL_CHIP_FR = 0x0040,
+	INTERNAL_CHIP_FW = 0x0080,
+	INTERNAL_CHIP_FI = 0x0100,
+	INTERNAL_CHIP_FT = 0x0200,
+};
+
+/* portControl */
+enum {
+	PORT_CONTROL_DS = 0x0001,
+	PORT_CONTROL_HH = 0x0002,
+	PORT_CONTROL_EI = 0x0004,
+	PORT_CONTROL_ET = 0x0008,
+	PORT_CONTROL_EF = 0x0010,
+	PORT_CONTROL_DRM = 0x0020,
+	PORT_CONTROL_RLB = 0x0040,
+	PORT_CONTROL_RCB = 0x0080,
+	PORT_CONTROL_MAC = 0x0100,
+	PORT_CONTROL_IPV = 0x0200,
+	PORT_CONTROL_IFP = 0x0400,
+	PORT_CONTROL_ITP = 0x0800,
+	PORT_CONTROL_FI = 0x1000,
+	PORT_CONTROL_DFP = 0x2000,
+	PORT_CONTROL_OI = 0x4000,
+	PORT_CONTROL_CC = 0x8000,
+};
+
+/* portStatus */
+enum {
+	PORT_STATUS_SM0 = 0x0001,
+	PORT_STATUS_SM1 = 0x0002,
+	PORT_STATUS_X = 0x0008,
+	PORT_STATUS_DL = 0x0080,
+	PORT_STATUS_IC = 0x0200,
+	PORT_STATUS_MRC = 0x0400,
+	PORT_STATUS_NL = 0x0800,
+	PORT_STATUS_REV_ID_MASK = 0x7000,
+	PORT_STATUS_REV_ID_1 = 0x1000,
+	PORT_STATUS_REV_ID_2 = 0x2000,
+	PORT_STATUS_REV_ID_3 = 0x3000,
+	PORT_STATUS_64 = 0x8000,
+	PORT_STATUS_UP0 = 0x10000,
+	PORT_STATUS_AC0 = 0x20000,
+	PORT_STATUS_AE0 = 0x40000,
+	PORT_STATUS_UP1 = 0x100000,
+	PORT_STATUS_AC1 = 0x200000,
+	PORT_STATUS_AE1 = 0x400000,
+	PORT_STATUS_F0_ENABLED = 0x1000000,
+	PORT_STATUS_F1_ENABLED = 0x2000000,
+	PORT_STATUS_F2_ENABLED = 0x4000000,
+	PORT_STATUS_F3_ENABLED = 0x8000000,
+};
+
+/* macMIIMgmtControlReg */
+enum {
+	MAC_ADDR_INDIRECT_PTR_REG_RP_MASK = 0x0003,
+	MAC_ADDR_INDIRECT_PTR_REG_RP_PRI_LWR = 0x0000,
+	MAC_ADDR_INDIRECT_PTR_REG_RP_PRI_UPR = 0x0001,
+	MAC_ADDR_INDIRECT_PTR_REG_RP_SEC_LWR = 0x0002,
+	MAC_ADDR_INDIRECT_PTR_REG_RP_SEC_UPR = 0x0003,
+	MAC_ADDR_INDIRECT_PTR_REG_PR = 0x0008,
+	MAC_ADDR_INDIRECT_PTR_REG_SS = 0x0010,
+	MAC_ADDR_INDIRECT_PTR_REG_SE = 0x0020,
+	MAC_ADDR_INDIRECT_PTR_REG_SP = 0x0040,
+	MAC_ADDR_INDIRECT_PTR_REG_PE = 0x0080,
+};
+
+/* macMIIMgmtControlReg */
+enum {
+	MAC_MII_CONTROL_RC = 0x0001,
+	MAC_MII_CONTROL_SC = 0x0002,
+	MAC_MII_CONTROL_AS = 0x0004,
+	MAC_MII_CONTROL_NP = 0x0008,
+	MAC_MII_CONTROL_CLK_SEL_MASK = 0x0070,
+	MAC_MII_CONTROL_CLK_SEL_DIV2 = 0x0000,
+	MAC_MII_CONTROL_CLK_SEL_DIV4 = 0x0010,
+	MAC_MII_CONTROL_CLK_SEL_DIV6 = 0x0020,
+	MAC_MII_CONTROL_CLK_SEL_DIV8 = 0x0030,
+	MAC_MII_CONTROL_CLK_SEL_DIV10 = 0x0040,
+	MAC_MII_CONTROL_CLK_SEL_DIV14 = 0x0050,
+	MAC_MII_CONTROL_CLK_SEL_DIV20 = 0x0060,
+	MAC_MII_CONTROL_CLK_SEL_DIV28 = 0x0070,
+	MAC_MII_CONTROL_RM = 0x8000,
+};
+
+/* macMIIStatusReg */
+enum {
+	MAC_MII_STATUS_BSY = 0x0001,
+	MAC_MII_STATUS_SC = 0x0002,
+	MAC_MII_STATUS_NV = 0x0004,
+};
+
+enum {
+	MAC_CONFIG_REG_PE = 0x0001,
+	MAC_CONFIG_REG_TF = 0x0002,
+	MAC_CONFIG_REG_RF = 0x0004,
+	MAC_CONFIG_REG_FD = 0x0008,
+	MAC_CONFIG_REG_GM = 0x0010,
+	MAC_CONFIG_REG_LB = 0x0020,
+	MAC_CONFIG_REG_SR = 0x8000,
+};
+
+enum {
+	MAC_HALF_DUPLEX_REG_ED = 0x10000,
+	MAC_HALF_DUPLEX_REG_NB = 0x20000,
+	MAC_HALF_DUPLEX_REG_BNB = 0x40000,
+	MAC_HALF_DUPLEX_REG_ALT = 0x80000,
+};
+
+enum {
+	IP_ADDR_INDEX_REG_MASK = 0x000f,
+	IP_ADDR_INDEX_REG_FUNC_0_PRI = 0x0000,
+	IP_ADDR_INDEX_REG_FUNC_0_SEC = 0x0001,
+	IP_ADDR_INDEX_REG_FUNC_1_PRI = 0x0002,
+	IP_ADDR_INDEX_REG_FUNC_1_SEC = 0x0003,
+	IP_ADDR_INDEX_REG_FUNC_2_PRI = 0x0004,
+	IP_ADDR_INDEX_REG_FUNC_2_SEC = 0x0005,
+	IP_ADDR_INDEX_REG_FUNC_3_PRI = 0x0006,
+	IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007,
+};
+
+enum {
+	PROBE_MUX_ADDR_REG_MUX_SEL_MASK = 0x003f,
+	PROBE_MUX_ADDR_REG_SYSCLK = 0x0000,
+	PROBE_MUX_ADDR_REG_PCICLK = 0x0040,
+	PROBE_MUX_ADDR_REG_NRXCLK = 0x0080,
+	PROBE_MUX_ADDR_REG_CPUCLK = 0x00C0,
+	PROBE_MUX_ADDR_REG_MODULE_SEL_MASK = 0x3f00,
+	PROBE_MUX_ADDR_REG_UP = 0x4000,
+	PROBE_MUX_ADDR_REG_RE = 0x8000,
+};
+
+enum {
+	STATISTICS_INDEX_REG_MASK = 0x01ff,
+	STATISTICS_INDEX_REG_MAC0_TX_FRAME = 0x0000,
+	STATISTICS_INDEX_REG_MAC0_TX_BYTES = 0x0001,
+	STATISTICS_INDEX_REG_MAC0_TX_STAT1 = 0x0002,
+	STATISTICS_INDEX_REG_MAC0_TX_STAT2 = 0x0003,
+	STATISTICS_INDEX_REG_MAC0_TX_STAT3 = 0x0004,
+	STATISTICS_INDEX_REG_MAC0_TX_STAT4 = 0x0005,
+	STATISTICS_INDEX_REG_MAC0_TX_STAT5 = 0x0006,
+	STATISTICS_INDEX_REG_MAC0_RX_FRAME = 0x0007,
+	STATISTICS_INDEX_REG_MAC0_RX_BYTES = 0x0008,
+	STATISTICS_INDEX_REG_MAC0_RX_STAT1 = 0x0009,
+	STATISTICS_INDEX_REG_MAC0_RX_STAT2 = 0x000a,
+	STATISTICS_INDEX_REG_MAC0_RX_STAT3 = 0x000b,
+	STATISTICS_INDEX_REG_MAC0_RX_ERR_CRC = 0x000c,
+	STATISTICS_INDEX_REG_MAC0_RX_ERR_ENC = 0x000d,
+	STATISTICS_INDEX_REG_MAC0_RX_ERR_LEN = 0x000e,
+	STATISTICS_INDEX_REG_MAC0_RX_STAT4 = 0x000f,
+	STATISTICS_INDEX_REG_MAC1_TX_FRAME = 0x0010,
+	STATISTICS_INDEX_REG_MAC1_TX_BYTES = 0x0011,
+	STATISTICS_INDEX_REG_MAC1_TX_STAT1 = 0x0012,
+	STATISTICS_INDEX_REG_MAC1_TX_STAT2 = 0x0013,
+	STATISTICS_INDEX_REG_MAC1_TX_STAT3 = 0x0014,
+	STATISTICS_INDEX_REG_MAC1_TX_STAT4 = 0x0015,
+	STATISTICS_INDEX_REG_MAC1_TX_STAT5 = 0x0016,
+	STATISTICS_INDEX_REG_MAC1_RX_FRAME = 0x0017,
+	STATISTICS_INDEX_REG_MAC1_RX_BYTES = 0x0018,
+	STATISTICS_INDEX_REG_MAC1_RX_STAT1 = 0x0019,
+	STATISTICS_INDEX_REG_MAC1_RX_STAT2 = 0x001a,
+	STATISTICS_INDEX_REG_MAC1_RX_STAT3 = 0x001b,
+	STATISTICS_INDEX_REG_MAC1_RX_ERR_CRC = 0x001c,
+	STATISTICS_INDEX_REG_MAC1_RX_ERR_ENC = 0x001d,
+	STATISTICS_INDEX_REG_MAC1_RX_ERR_LEN = 0x001e,
+	STATISTICS_INDEX_REG_MAC1_RX_STAT4 = 0x001f,
+	STATISTICS_INDEX_REG_IP_TX_PKTS = 0x0020,
+	STATISTICS_INDEX_REG_IP_TX_BYTES = 0x0021,
+	STATISTICS_INDEX_REG_IP_TX_FRAG = 0x0022,
+	STATISTICS_INDEX_REG_IP_RX_PKTS = 0x0023,
+	STATISTICS_INDEX_REG_IP_RX_BYTES = 0x0024,
+	STATISTICS_INDEX_REG_IP_RX_FRAG = 0x0025,
+	STATISTICS_INDEX_REG_IP_DGRM_REASSEMBLY = 0x0026,
+	STATISTICS_INDEX_REG_IP_V6_RX_PKTS = 0x0027,
+	STATISTICS_INDEX_REG_IP_RX_PKTERR = 0x0028,
+	STATISTICS_INDEX_REG_IP_REASSEMBLY_ERR = 0x0029,
+	STATISTICS_INDEX_REG_TCP_TX_SEG = 0x0030,
+	STATISTICS_INDEX_REG_TCP_TX_BYTES = 0x0031,
+	STATISTICS_INDEX_REG_TCP_RX_SEG = 0x0032,
+	STATISTICS_INDEX_REG_TCP_RX_BYTES = 0x0033,
+	STATISTICS_INDEX_REG_TCP_TIMER_EXP = 0x0034,
+	STATISTICS_INDEX_REG_TCP_RX_ACK = 0x0035,
+	STATISTICS_INDEX_REG_TCP_TX_ACK = 0x0036,
+	STATISTICS_INDEX_REG_TCP_RX_ERR = 0x0037,
+	STATISTICS_INDEX_REG_TCP_RX_WIN_PROBE = 0x0038,
+	STATISTICS_INDEX_REG_TCP_ECC_ERR_CORR = 0x003f,
+};
+
+enum {
+	PORT_FATAL_ERROR_STATUS_OFB_RE_MAC0 = 0x00000001,
+	PORT_FATAL_ERROR_STATUS_OFB_RE_MAC1 = 0x00000002,
+	PORT_FATAL_ERROR_STATUS_OFB_WE = 0x00000004,
+	PORT_FATAL_ERROR_STATUS_IFB_RE = 0x00000008,
+	PORT_FATAL_ERROR_STATUS_IFB_WE_MAC0 = 0x00000010,
+	PORT_FATAL_ERROR_STATUS_IFB_WE_MAC1 = 0x00000020,
+	PORT_FATAL_ERROR_STATUS_ODE_RE = 0x00000040,
+	PORT_FATAL_ERROR_STATUS_ODE_WE = 0x00000080,
+	PORT_FATAL_ERROR_STATUS_IDE_RE = 0x00000100,
+	PORT_FATAL_ERROR_STATUS_IDE_WE = 0x00000200,
+	PORT_FATAL_ERROR_STATUS_SDE_RE = 0x00000400,
+	PORT_FATAL_ERROR_STATUS_SDE_WE = 0x00000800,
+	PORT_FATAL_ERROR_STATUS_BLE = 0x00001000,
+	PORT_FATAL_ERROR_STATUS_SPE = 0x00002000,
+	PORT_FATAL_ERROR_STATUS_EP0 = 0x00004000,
+	PORT_FATAL_ERROR_STATUS_EP1 = 0x00008000,
+	PORT_FATAL_ERROR_STATUS_ICE = 0x00010000,
+	PORT_FATAL_ERROR_STATUS_ILE = 0x00020000,
+	PORT_FATAL_ERROR_STATUS_OPE = 0x00040000,
+	PORT_FATAL_ERROR_STATUS_TA = 0x00080000,
+	PORT_FATAL_ERROR_STATUS_MA = 0x00100000,
+	PORT_FATAL_ERROR_STATUS_SCE = 0x00200000,
+	PORT_FATAL_ERROR_STATUS_RPE = 0x00400000,
+	PORT_FATAL_ERROR_STATUS_MPE = 0x00800000,
+	PORT_FATAL_ERROR_STATUS_OCE = 0x01000000,
+};
+
+/*
+ *  port control and status page - page 0
+ */
+
+struct ql3xxx_port_registers {
+	struct ql3xxx_common_registers CommonRegs;
+
+	u32 ExternalHWConfig;
+	u32 InternalChipConfig;
+	u32 portControl;
+	u32 portStatus;
+	u32 macAddrIndirectPtrReg;
+	u32 macAddrDataReg;
+	u32 macMIIMgmtControlReg;
+	u32 macMIIMgmtAddrReg;
+	u32 macMIIMgmtDataReg;
+	u32 macMIIStatusReg;
+	u32 mac0ConfigReg;
+	u32 mac0IpgIfgReg;
+	u32 mac0HalfDuplexReg;
+	u32 mac0MaxFrameLengthReg;
+	u32 mac0PauseThresholdReg;
+	u32 mac1ConfigReg;
+	u32 mac1IpgIfgReg;
+	u32 mac1HalfDuplexReg;
+	u32 mac1MaxFrameLengthReg;
+	u32 mac1PauseThresholdReg;
+	u32 ipAddrIndexReg;
+	u32 ipAddrDataReg;
+	u32 ipReassemblyTimeout;
+	u32 tcpMaxWindow;
+	u32 currentTcpTimestamp[2];
+	u32 internalRamRWAddrReg;
+	u32 internalRamWDataReg;
+	u32 reclaimedBufferAddrRegLow;
+	u32 reclaimedBufferAddrRegHigh;
+	u32 reserved[2];
+	u32 fpgaRevID;
+	u32 localRamAddr;
+	u32 localRamDataAutoIncr;
+	u32 localRamDataNonIncr;
+	u32 gpOutput;
+	u32 gpInput;
+	u32 probeMuxAddr;
+	u32 probeMuxData;
+	u32 statisticsIndexReg;
+	u32 statisticsReadDataRegAutoIncr;
+	u32 statisticsReadDataRegNoIncr;
+	u32 PortFatalErrStatus;
+};
+
+/*
+ * port host memory config page - page 1
+ */
+struct ql3xxx_host_memory_registers {
+	struct ql3xxx_common_registers CommonRegs;
+
+	u32 reserved[12];
+
+	/* Network Request Queue */
+	u32 reqConsumerIndex;
+	u32 reqConsumerIndexAddrLow;
+	u32 reqConsumerIndexAddrHigh;
+	u32 reqBaseAddrLow;
+	u32 reqBaseAddrHigh;
+	u32 reqLength;
+
+	/* Network Completion Queue */
+	u32 rspProducerIndex;
+	u32 rspProducerIndexAddrLow;
+	u32 rspProducerIndexAddrHigh;
+	u32 rspBaseAddrLow;
+	u32 rspBaseAddrHigh;
+	u32 rspLength;
+
+	/* RX Large Buffer Queue */
+	u32 rxLargeQConsumerIndex;
+	u32 rxLargeQBaseAddrLow;
+	u32 rxLargeQBaseAddrHigh;
+	u32 rxLargeQLength;
+	u32 rxLargeBufferLength;
+
+	/* RX Small Buffer Queue */
+	u32 rxSmallQConsumerIndex;
+	u32 rxSmallQBaseAddrLow;
+	u32 rxSmallQBaseAddrHigh;
+	u32 rxSmallQLength;
+	u32 rxSmallBufferLength;
+
+};
+
+/*
+ *  port local RAM page - page 2
+ */
+struct ql3xxx_local_ram_registers {
+	struct ql3xxx_common_registers CommonRegs;
+	u32 bufletSize;
+	u32 maxBufletCount;
+	u32 currentBufletCount;
+	u32 reserved;
+	u32 freeBufletThresholdLow;
+	u32 freeBufletThresholdHigh;
+	u32 ipHashTableBase;
+	u32 ipHashTableCount;
+	u32 tcpHashTableBase;
+	u32 tcpHashTableCount;
+	u32 ncbBase;
+	u32 maxNcbCount;
+	u32 currentNcbCount;
+	u32 drbBase;
+	u32 maxDrbCount;
+	u32 currentDrbCount;
+};
+
+/*
+ * definitions for Semaphore bits in Semaphore/Serial NVRAM interface register
+ */
+
+#define LS_64BITS(x)    (u32)(0xffffffff & ((u64)x))
+#define MS_64BITS(x)    (u32)(0xffffffff & (((u64)x)>>16>>16) )
+
+/*
+ * I/O register
+ */
+
+enum {
+	CONTROL_REG = 0,
+	STATUS_REG = 1,
+	PHY_STAT_LINK_UP = 0x0004,
+	PHY_CTRL_LOOPBACK = 0x4000,
+
+	PETBI_CONTROL_REG = 0x00,
+	PETBI_CTRL_SOFT_RESET = 0x8000,
+	PETBI_CTRL_AUTO_NEG = 0x1000,
+	PETBI_CTRL_RESTART_NEG = 0x0200,
+	PETBI_CTRL_FULL_DUPLEX = 0x0100,
+	PETBI_CTRL_SPEED_1000 = 0x0040,
+
+	PETBI_STATUS_REG = 0x01,
+	PETBI_STAT_NEG_DONE = 0x0020,
+	PETBI_STAT_LINK_UP = 0x0004,
+
+	PETBI_NEG_ADVER = 0x04,
+	PETBI_NEG_PAUSE = 0x0080,
+	PETBI_NEG_PAUSE_MASK = 0x0180,
+	PETBI_NEG_DUPLEX = 0x0020,
+	PETBI_NEG_DUPLEX_MASK = 0x0060,
+
+	PETBI_NEG_PARTNER = 0x05,
+	PETBI_NEG_ERROR_MASK = 0x3000,
+
+	PETBI_EXPANSION_REG = 0x06,
+	PETBI_EXP_PAGE_RX = 0x0002,
+
+	PETBI_TBI_CTRL = 0x11,
+	PETBI_TBI_RESET = 0x8000,
+	PETBI_TBI_AUTO_SENSE = 0x0100,
+	PETBI_TBI_SERDES_MODE = 0x0010,
+	PETBI_TBI_SERDES_WRAP = 0x0002,
+
+	AUX_CONTROL_STATUS = 0x1c,
+	PHY_AUX_NEG_DONE = 0x8000,
+	PHY_NEG_PARTNER = 5,
+	PHY_AUX_DUPLEX_STAT = 0x0020,
+	PHY_AUX_SPEED_STAT = 0x0018,
+	PHY_AUX_NO_HW_STRAP = 0x0004,
+	PHY_AUX_RESET_STICK = 0x0002,
+	PHY_NEG_PAUSE = 0x0400,
+	PHY_CTRL_SOFT_RESET = 0x8000,
+	PHY_NEG_ADVER = 4,
+	PHY_NEG_ADV_SPEED = 0x01e0,
+	PHY_CTRL_RESTART_NEG = 0x0200,
+};
+enum {
+/* AM29LV Flash definitions	*/
+	FM93C56A_START = 0x1,
+/* Commands */
+	FM93C56A_READ = 0x2,
+	FM93C56A_WEN = 0x0,
+	FM93C56A_WRITE = 0x1,
+	FM93C56A_WRITE_ALL = 0x0,
+	FM93C56A_WDS = 0x0,
+	FM93C56A_ERASE = 0x3,
+	FM93C56A_ERASE_ALL = 0x0,
+/* Command Extentions */
+	FM93C56A_WEN_EXT = 0x3,
+	FM93C56A_WRITE_ALL_EXT = 0x1,
+	FM93C56A_WDS_EXT = 0x0,
+	FM93C56A_ERASE_ALL_EXT = 0x2,
+/* Special Bits */
+	FM93C56A_READ_DUMMY_BITS = 1,
+	FM93C56A_READY = 0,
+	FM93C56A_BUSY = 1,
+	FM93C56A_CMD_BITS = 2,
+/* AM29LV Flash definitions	*/
+	FM93C56A_SIZE_8 = 0x100,
+	FM93C56A_SIZE_16 = 0x80,
+	FM93C66A_SIZE_8 = 0x200,
+	FM93C66A_SIZE_16 = 0x100,
+	FM93C86A_SIZE_16 = 0x400,
+/* Address Bits */
+	FM93C56A_NO_ADDR_BITS_16 = 8,
+	FM93C56A_NO_ADDR_BITS_8 = 9,
+	FM93C86A_NO_ADDR_BITS_16 = 10,
+/* Data Bits */
+	FM93C56A_DATA_BITS_16 = 16,
+	FM93C56A_DATA_BITS_8 = 8,
+};
+enum {
+/* Auburn Bits */
+	    AUBURN_EEPROM_DI = 0x8,
+	AUBURN_EEPROM_DI_0 = 0x0,
+	AUBURN_EEPROM_DI_1 = 0x8,
+	AUBURN_EEPROM_DO = 0x4,
+	AUBURN_EEPROM_DO_0 = 0x0,
+	AUBURN_EEPROM_DO_1 = 0x4,
+	AUBURN_EEPROM_CS = 0x2,
+	AUBURN_EEPROM_CS_0 = 0x0,
+	AUBURN_EEPROM_CS_1 = 0x2,
+	AUBURN_EEPROM_CLK_RISE = 0x1,
+	AUBURN_EEPROM_CLK_FALL = 0x0,
+};
+enum {EEPROM_SIZE = FM93C86A_SIZE_16,
+	EEPROM_NO_ADDR_BITS = FM93C86A_NO_ADDR_BITS_16,
+	EEPROM_NO_DATA_BITS = FM93C56A_DATA_BITS_16,
+};
+
+/*
+ *  MAC Config data structure
+ */
+    struct eeprom_port_cfg {
+	u16 etherMtu_mac;
+	u16 pauseThreshold_mac;
+	u16 resumeThreshold_mac;
+	u16 portConfiguration;
+#define PORT_CONFIG_AUTO_NEG_ENABLED        0x8000
+#define PORT_CONFIG_SYM_PAUSE_ENABLED       0x4000
+#define PORT_CONFIG_FULL_DUPLEX_ENABLED     0x2000
+#define PORT_CONFIG_HALF_DUPLEX_ENABLED     0x1000
+#define PORT_CONFIG_1000MB_SPEED            0x0400
+#define PORT_CONFIG_100MB_SPEED             0x0200
+#define PORT_CONFIG_10MB_SPEED              0x0100
+#define PORT_CONFIG_LINK_SPEED_MASK         0x0F00
+	u16 reserved[12];
+
+};
+
+/*
+ * BIOS data structure
+ */
+struct eeprom_bios_cfg {
+	u16 SpinDlyEn:1, disBios:1, EnMemMap:1, EnSelectBoot:1, Reserved:12;
+
+	u8 bootID0:7, boodID0Valid:1;
+	u8 bootLun0[8];
+
+	u8 bootID1:7, boodID1Valid:1;
+	u8 bootLun1[8];
+
+	u16 MaxLunsTrgt;
+	u8 reserved[10];
+};
+
+/*
+ *  Function Specific Data structure
+ */
+struct eeprom_function_cfg {
+	u8 reserved[30];
+	u8 macAddress[6];
+	u8 macAddressSecondary[6];
+
+	u16 subsysVendorId;
+	u16 subsysDeviceId;
+};
+
+/*
+ *  EEPROM format
+ */
+struct eeprom_data {
+	u8 asicId[4];
+	u8 version;
+	u8 numPorts;
+	u16 boardId;
+
+#define EEPROM_BOARDID_STR_SIZE   16
+#define EEPROM_SERIAL_NUM_SIZE    16
+
+	u8 boardIdStr[16];
+	u8 serialNumber[16];
+	u16 extHwConfig;
+	struct eeprom_port_cfg macCfg_port0;
+	struct eeprom_port_cfg macCfg_port1;
+	u16 bufletSize;
+	u16 bufletCount;
+	u16 tcpWindowThreshold50;
+	u16 tcpWindowThreshold25;
+	u16 tcpWindowThreshold0;
+	u16 ipHashTableBaseHi;
+	u16 ipHashTableBaseLo;
+	u16 ipHashTableSize;
+	u16 tcpHashTableBaseHi;
+	u16 tcpHashTableBaseLo;
+	u16 tcpHashTableSize;
+	u16 ncbTableBaseHi;
+	u16 ncbTableBaseLo;
+	u16 ncbTableSize;
+	u16 drbTableBaseHi;
+	u16 drbTableBaseLo;
+	u16 drbTableSize;
+	u16 reserved_142[4];
+	u16 ipReassemblyTimeout;
+	u16 tcpMaxWindowSize;
+	u16 ipSecurity;
+#define IPSEC_CONFIG_PRESENT 0x0001
+	u8 reserved_156[294];
+	u16 qDebug[8];
+	struct eeprom_function_cfg funcCfg_fn0;
+	u16 reserved_510;
+	u8 oemSpace[432];
+	struct eeprom_bios_cfg biosCfg_fn1;
+	struct eeprom_function_cfg funcCfg_fn1;
+	u16 reserved_1022;
+	u8 reserved_1024[464];
+	struct eeprom_function_cfg funcCfg_fn2;
+	u16 reserved_1534;
+	u8 reserved_1536[432];
+	struct eeprom_bios_cfg biosCfg_fn3;
+	struct eeprom_function_cfg funcCfg_fn3;
+	u16 checksum;
+};
+
+/*
+ * General definitions...
+ */
+
+/*
+ * Below are a number compiler switches for controlling driver behavior.
+ * Some are not supported under certain conditions and are notated as such.
+ */
+
+#define QL3XXX_VENDOR_ID    0x1077
+#define QL3022_DEVICE_ID    0x3022
+
+/* MTU & Frame Size stuff */
+#define NORMAL_MTU_SIZE 		ETH_DATA_LEN
+#define JUMBO_MTU_SIZE 			9000
+#define VLAN_ID_LEN			    2
+
+/* Request Queue Related Definitions */
+#define NUM_REQ_Q_ENTRIES   256	/* so that 64 * 64  = 4096 (1 page) */
+
+/* Response Queue Related Definitions */
+#define NUM_RSP_Q_ENTRIES   256	/* so that 256 * 16  = 4096 (1 page) */
+
+/* Transmit and Receive Buffers */
+#define NUM_LBUFQ_ENTRIES   	128
+#define NUM_SBUFQ_ENTRIES   	64
+#define QL_SMALL_BUFFER_SIZE    32
+#define QL_ADDR_ELE_PER_BUFQ_ENTRY \
+(sizeof(struct lrg_buf_q_entry) / sizeof(struct bufq_addr_element))
+    /* Each send has at least control block.  This is how many we keep. */
+#define NUM_SMALL_BUFFERS     	NUM_SBUFQ_ENTRIES * QL_ADDR_ELE_PER_BUFQ_ENTRY
+#define NUM_LARGE_BUFFERS     	NUM_LBUFQ_ENTRIES * QL_ADDR_ELE_PER_BUFQ_ENTRY
+#define QL_HEADER_SPACE 32	/* make header space at top of skb. */
+/*
+ * Large & Small Buffers for Receives
+ */
+struct lrg_buf_q_entry {
+
+	u32 addr0_lower;
+#define IAL_LAST_ENTRY 0x00000001
+#define IAL_CONT_ENTRY 0x00000002
+#define IAL_FLAG_MASK  0x00000003
+	u32 addr0_upper;
+	u32 addr1_lower;
+	u32 addr1_upper;
+	u32 addr2_lower;
+	u32 addr2_upper;
+	u32 addr3_lower;
+	u32 addr3_upper;
+	u32 addr4_lower;
+	u32 addr4_upper;
+	u32 addr5_lower;
+	u32 addr5_upper;
+	u32 addr6_lower;
+	u32 addr6_upper;
+	u32 addr7_lower;
+	u32 addr7_upper;
+
+};
+
+struct bufq_addr_element {
+	u32 addr_low;
+	u32 addr_high;
+};
+
+#define QL_NO_RESET			0
+#define QL_DO_RESET			1
+
+enum link_state_t {
+	LS_UNKNOWN = 0,
+	LS_DOWN,
+	LS_DEGRADE,
+	LS_RECOVER,
+	LS_UP,
+};
+
+struct ql_rcv_buf_cb {
+	struct ql_rcv_buf_cb *next;
+	struct sk_buff *skb;
+	 DECLARE_PCI_UNMAP_ADDR(mapaddr);
+	 DECLARE_PCI_UNMAP_LEN(maplen);
+	__le32 buf_phy_addr_low;
+	__le32 buf_phy_addr_high;
+	int index;
+};
+
+struct ql_tx_buf_cb {
+	struct sk_buff *skb;
+	struct ob_mac_iocb_req *queue_entry ;
+	 DECLARE_PCI_UNMAP_ADDR(mapaddr);
+	 DECLARE_PCI_UNMAP_LEN(maplen);
+};
+
+/* definitions for type field */
+#define QL_BUF_TYPE_MACIOCB 0x01
+#define QL_BUF_TYPE_IPIOCB  0x02
+#define QL_BUF_TYPE_TCPIOCB 0x03
+
+/* qdev->flags definitions. */
+enum { QL_RESET_DONE = 1,	/* Reset finished. */
+	QL_RESET_ACTIVE = 2,	/* Waiting for reset to finish. */
+	QL_RESET_START = 3,	/* Please reset the chip. */
+	QL_RESET_PER_SCSI = 4,	/* SCSI driver requests reset. */
+	QL_TX_TIMEOUT = 5,	/* Timeout in progress. */
+	QL_LINK_MASTER = 6,	/* This driver controls the link. */
+	QL_ADAPTER_UP = 7,	/* Adapter has been brought up. */
+	QL_THREAD_UP = 8,	/* This flag is available. */
+	QL_LINK_UP = 9,	/* Link Status. */
+	QL_ALLOC_REQ_RSP_Q_DONE = 10,
+	QL_ALLOC_BUFQS_DONE = 11,
+	QL_ALLOC_SMALL_BUF_DONE = 12,
+	QL_LINK_OPTICAL = 13,
+	QL_MSI_ENABLED = 14,
+};
+
+/*
+ * ql3_adapter - The main Adapter structure definition.
+ * This structure has all fields relevant to the hardware.
+ */
+
+struct ql3_adapter {
+	u32 reserved_00;
+	unsigned long flags;
+
+	/* PCI Configuration information for this device */
+	struct pci_dev *pdev;
+	struct net_device *ndev;	/* Parent NET device */
+
+	/* Hardware information */
+	u8 chip_rev_id;
+	u8 pci_slot;
+	u8 pci_width;
+	u8 pci_x;
+	u32 msi;
+	int index;
+	struct timer_list adapter_timer;	/* timer used for various functions */
+
+	spinlock_t adapter_lock;
+	spinlock_t hw_lock;
+
+	/* PCI Bus Relative Register Addresses */
+	u8 *mmap_virt_base;	/* stores return value from ioremap() */
+	struct ql3xxx_port_registers __iomem *mem_map_registers;
+	u32 current_page;	/* tracks current register page */
+
+	u32 msg_enable;
+	u8 reserved_01[2];
+	u8 reserved_02[2];
+
+	/* Page for Shadow Registers */
+	void *shadow_reg_virt_addr;
+	dma_addr_t shadow_reg_phy_addr;
+
+	/* Net Request Queue */
+	u32 req_q_size;
+	u32 reserved_03;
+	struct ob_mac_iocb_req *req_q_virt_addr;
+	dma_addr_t req_q_phy_addr;
+	u16 req_producer_index;
+	u16 reserved_04;
+	u16 *preq_consumer_index;
+	u32 req_consumer_index_phy_addr_high;
+	u32 req_consumer_index_phy_addr_low;
+	atomic_t tx_count;
+	struct ql_tx_buf_cb tx_buf[NUM_REQ_Q_ENTRIES];
+
+	/* Net Response Queue */
+	u32 rsp_q_size;
+	u32 eeprom_cmd_data;
+	struct net_rsp_iocb *rsp_q_virt_addr;
+	dma_addr_t rsp_q_phy_addr;
+	struct net_rsp_iocb *rsp_current;
+	u16 rsp_consumer_index;
+	u16 reserved_06;
+	u32 *prsp_producer_index;
+	u32 rsp_producer_index_phy_addr_high;
+	u32 rsp_producer_index_phy_addr_low;
+
+	/* Large Buffer Queue */
+	u32 lrg_buf_q_alloc_size;
+	u32 lrg_buf_q_size;
+	void *lrg_buf_q_alloc_virt_addr;
+	void *lrg_buf_q_virt_addr;
+	dma_addr_t lrg_buf_q_alloc_phy_addr;
+	dma_addr_t lrg_buf_q_phy_addr;
+	u32 lrg_buf_q_producer_index;
+	u32 lrg_buf_release_cnt;
+	struct bufq_addr_element *lrg_buf_next_free;
+
+	/* Large (Receive) Buffers */
+	struct ql_rcv_buf_cb lrg_buf[NUM_LARGE_BUFFERS];
+	struct ql_rcv_buf_cb *lrg_buf_free_head;
+	struct ql_rcv_buf_cb *lrg_buf_free_tail;
+	u32 lrg_buf_free_count;
+	u32 lrg_buffer_len;
+	u32 lrg_buf_index;
+	u32 lrg_buf_skb_check;
+
+	/* Small Buffer Queue */
+	u32 small_buf_q_alloc_size;
+	u32 small_buf_q_size;
+	u32 small_buf_q_producer_index;
+	void *small_buf_q_alloc_virt_addr;
+	void *small_buf_q_virt_addr;
+	dma_addr_t small_buf_q_alloc_phy_addr;
+	dma_addr_t small_buf_q_phy_addr;
+	u32 small_buf_index;
+
+	/* Small (Receive) Buffers */
+	void *small_buf_virt_addr;
+	dma_addr_t small_buf_phy_addr;
+	u32 small_buf_phy_addr_low;
+	u32 small_buf_phy_addr_high;
+	u32 small_buf_release_cnt;
+	u32 small_buf_total_size;
+
+	/* ISR related, saves status for DPC. */
+	u32 control_status;
+
+	struct eeprom_data nvram_data;
+	struct timer_list ioctl_timer;
+	u32 port_link_state;
+	u32 last_rsp_offset;
+
+	/* 4022 specific */
+	u32 mac_index;		/* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */
+	u32 PHYAddr;		/* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */
+	u32 mac_ob_opcode;	/* Opcode to use on mac transmission */
+	u32 tcp_ob_opcode;	/* Opcode to use on tcp transmission */
+	u32 update_ob_opcode;	/* Opcode to use for updating NCB */
+	u32 mb_bit_mask;	/* MA Bits mask to use on transmission */
+	u32 numPorts;
+	struct net_device_stats stats;
+	struct workqueue_struct *workqueue;
+	struct work_struct reset_work;
+	struct work_struct tx_timeout_work;
+	u32 max_frame_size;
+};
+
+#endif				/* _QLA3XXX_H_ */
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4c2f575..5722a56 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2809,7 +2809,7 @@
 static int __init
 rtl8169_init_module(void)
 {
-	return pci_module_init(&rtl8169_pci_driver);
+	return pci_register_driver(&rtl8169_pci_driver);
 }
 
 static void __exit
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index c3ed734..31bcdad 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1736,7 +1736,7 @@
 
 static int __init rr_init_module(void)
 {
-	return pci_module_init(&rr_driver);
+	return pci_register_driver(&rr_driver);
 }
 
 static void __exit rr_cleanup_module(void)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index e72e0e0..c16f915 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7233,7 +7233,7 @@
 
 int __init s2io_starter(void)
 {
-	return pci_module_init(&s2io_driver);
+	return pci_register_driver(&s2io_driver);
 }
 
 /**
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index b2acedb..c479b07 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -1131,7 +1131,7 @@
 
 static int __init saa9730_init(void)
 {
-	return pci_module_init(&saa9730_driver);
+	return pci_register_driver(&saa9730_driver);
 }
 
 static void __exit saa9730_cleanup(void)
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index df0cbeb..16e30d5 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1871,7 +1871,7 @@
 
 static int __init sis190_init_module(void)
 {
-	return pci_module_init(&sis190_pci_driver);
+	return pci_register_driver(&sis190_pci_driver);
 }
 
 static void __exit sis190_cleanup_module(void)
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 29ee7ff..6af5028 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -134,6 +134,7 @@
 	{ "AMD 79C901 10BASE-T PHY",  		0x0000, 0x6B70, LAN },
 	{ "AMD 79C901 HomePNA PHY",		0x0000, 0x6B90, HOME},
 	{ "ICS LAN PHY",			0x0015, 0xF440, LAN },
+	{ "ICS LAN PHY",			0x0143, 0xBC70, LAN },
 	{ "NS 83851 PHY",			0x2000, 0x5C20, MIX },
 	{ "NS 83847 PHY",                       0x2000, 0x5C30, MIX },
 	{ "Realtek RTL8201 PHY",		0x0000, 0x8200, LAN },
@@ -2495,7 +2496,7 @@
 	printk(version);
 #endif
 
-	return pci_module_init(&sis900_pci_driver);
+	return pci_register_driver(&sis900_pci_driver);
 }
 
 static void __exit sis900_cleanup_module(void)
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index ee62845..49e76c7 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5133,7 +5133,7 @@
 
 static int __init skge_init(void)
 {
-	return pci_module_init(&skge_driver);
+	return pci_register_driver(&skge_driver);
 }
 
 static void __exit skge_exit(void)
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index b5714a60..8e4d184 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -2280,7 +2280,7 @@
 
 static int __init skfd_init(void)
 {
-	return pci_module_init(&skfddi_pci_driver);
+	return pci_register_driver(&skfddi_pci_driver);
 }
 
 static void __exit skfd_exit(void)
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index ad878df..a1fc043 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -43,7 +43,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"1.6"
+#define DRV_VERSION		"1.7"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -827,7 +827,8 @@
 	do {
 		struct sk_buff *skb;
 
-		skb = alloc_skb(skge->rx_buf_size + NET_IP_ALIGN, GFP_KERNEL);
+		skb = __dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN,
+				      GFP_KERNEL);
 		if (!skb)
 			return -ENOMEM;
 
@@ -2609,7 +2610,7 @@
 		goto error;
 
 	if (len < RX_COPY_THRESHOLD) {
-		skb = alloc_skb(len + 2, GFP_ATOMIC);
+		skb = dev_alloc_skb(len + 2);
 		if (!skb)
 			goto resubmit;
 
@@ -2624,7 +2625,7 @@
 		skge_rx_reuse(e, skge->rx_buf_size);
 	} else {
 		struct sk_buff *nskb;
-		nskb = alloc_skb(skge->rx_buf_size + NET_IP_ALIGN, GFP_ATOMIC);
+		nskb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
 		if (!nskb)
 			goto resubmit;
 
@@ -2747,7 +2748,7 @@
 	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask |= rxirqmask[skge->port];
   	skge_write32(hw, B0_IMSK, hw->intr_mask);
-	mmiowb();
+	skge_read32(hw, B0_IMSK);
 	spin_unlock_irq(&hw->hw_lock);
 
 	return 0;
@@ -2881,6 +2882,7 @@
 	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask |= IS_EXT_REG;
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	skge_read32(hw, B0_IMSK);
 	spin_unlock_irq(&hw->hw_lock);
 }
 
@@ -2955,6 +2957,7 @@
 		skge_error_irq(hw);
 
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	skge_read32(hw, B0_IMSK);
 	spin_unlock(&hw->hw_lock);
 
 	return IRQ_HANDLED;
@@ -3106,7 +3109,6 @@
 	else
 		hw->ram_size = t8 * 4096;
 
-	spin_lock_init(&hw->hw_lock);
 	hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1;
 	if (hw->ports > 1)
 		hw->intr_mask |= IS_PORT_2;
@@ -3332,6 +3334,7 @@
 	hw->pdev = pdev;
 	mutex_init(&hw->phy_mutex);
 	INIT_WORK(&hw->phy_work, skge_extirq, hw);
+	spin_lock_init(&hw->hw_lock);
 
 	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
 	if (!hw->regs) {
@@ -3340,23 +3343,16 @@
 		goto err_out_free_hw;
 	}
 
-	err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, DRV_NAME, hw);
-	if (err) {
-		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
-		       pci_name(pdev), pdev->irq);
-		goto err_out_iounmap;
-	}
-	pci_set_drvdata(pdev, hw);
-
 	err = skge_reset(hw);
 	if (err)
-		goto err_out_free_irq;
+		goto err_out_iounmap;
 
 	printk(KERN_INFO PFX DRV_VERSION " addr 0x%llx irq %d chip %s rev %d\n",
 	       (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
 	       skge_board_name(hw), hw->chip_rev);
 
-	if ((dev = skge_devinit(hw, 0, using_dac)) == NULL)
+	dev = skge_devinit(hw, 0, using_dac);
+	if (!dev)
 		goto err_out_led_off;
 
 	if (!is_valid_ether_addr(dev->dev_addr)) {
@@ -3366,7 +3362,6 @@
 		goto err_out_free_netdev;
 	}
 
-
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_ERR PFX "%s: cannot register net device\n",
@@ -3374,6 +3369,12 @@
 		goto err_out_free_netdev;
 	}
 
+	err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+		       dev->name, pdev->irq);
+		goto err_out_unregister;
+	}
 	skge_show_addr(dev);
 
 	if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) {
@@ -3386,15 +3387,16 @@
 			free_netdev(dev1);
 		}
 	}
+	pci_set_drvdata(pdev, hw);
 
 	return 0;
 
+err_out_unregister:
+	unregister_netdev(dev);
 err_out_free_netdev:
 	free_netdev(dev);
 err_out_led_off:
 	skge_write16(hw, B0_LED, LED_STAT_OFF);
-err_out_free_irq:
-	free_irq(pdev->irq, hw);
 err_out_iounmap:
 	iounmap(hw->regs);
 err_out_free_hw:
@@ -3424,6 +3426,7 @@
 	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask = 0;
 	skge_write32(hw, B0_IMSK, 0);
+	skge_read32(hw, B0_IMSK);
 	spin_unlock_irq(&hw->hw_lock);
 
 	skge_write16(hw, B0_LED, LED_STAT_OFF);
@@ -3449,26 +3452,25 @@
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
 	int i, wol = 0;
 
-	for (i = 0; i < 2; i++) {
+	pci_save_state(pdev);
+	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 
-		if (dev) {
+		if (netif_running(dev)) {
 			struct skge_port *skge = netdev_priv(dev);
-			if (netif_running(dev)) {
-				netif_carrier_off(dev);
-				if (skge->wol)
-					netif_stop_queue(dev);
-				else
-					skge_down(dev);
-			}
-			netif_device_detach(dev);
+
+			netif_carrier_off(dev);
+			if (skge->wol)
+				netif_stop_queue(dev);
+			else
+				skge_down(dev);
 			wol |= skge->wol;
 		}
+		netif_device_detach(dev);
 	}
 
-	pci_save_state(pdev);
+	skge_write32(hw, B0_IMSK, 0);
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
-	pci_disable_device(pdev);
 	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
 	return 0;
@@ -3477,23 +3479,33 @@
 static int skge_resume(struct pci_dev *pdev)
 {
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
-	int i;
+	int i, err;
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	pci_enable_wake(pdev, PCI_D0, 0);
 
-	skge_reset(hw);
+	err = skge_reset(hw);
+	if (err)
+		goto out;
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
-		if (dev) {
-			netif_device_attach(dev);
-			if (netif_running(dev) && skge_up(dev))
+
+		netif_device_attach(dev);
+		if (netif_running(dev)) {
+			err = skge_up(dev);
+
+			if (err) {
+				printk(KERN_ERR PFX "%s: could not up: %d\n",
+				       dev->name, err);
 				dev_close(dev);
+				goto out;
+			}
 		}
 	}
-	return 0;
+out:
+	return err;
 }
 #endif
 
@@ -3510,7 +3522,7 @@
 
 static int __init skge_init_module(void)
 {
-	return pci_module_init(&skge_driver);
+	return pci_register_driver(&skge_driver);
 }
 
 static void __exit skge_cleanup_module(void)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 933e87f..f37fe8f 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.5"
+#define DRV_VERSION		"1.7"
 #define PFX			DRV_NAME " "
 
 /*
@@ -121,6 +121,11 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) },
 	{ 0 }
 };
 
@@ -190,7 +195,6 @@
 static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 {
 	u16 power_control;
-	u32 reg1;
 	int vaux;
 
 	pr_debug("sky2_set_power_state %d\n", state);
@@ -223,20 +227,9 @@
 		else
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
-		/* Turn off phy power saving */
-		reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-		reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
-
-		/* looks like this XL is back asswards .. */
-		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) {
-			reg1 |= PCI_Y2_PHY1_COMA;
-			if (hw->ports > 1)
-				reg1 |= PCI_Y2_PHY2_COMA;
-		}
-		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-		udelay(100);
-
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+			u32 reg1;
+
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -248,15 +241,6 @@
 
 	case PCI_D3hot:
 	case PCI_D3cold:
-		/* Turn on phy power saving */
-		reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-			reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
-		else
-			reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
-		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
-		udelay(100);
-
 		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 		else
@@ -280,7 +264,7 @@
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 }
 
-static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
+static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
 {
 	u16 reg;
 
@@ -528,6 +512,29 @@
 		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
 }
 
+static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
+{
+	u32 reg1;
+	static const u32 phy_power[]
+		= { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+
+	/* looks like this XL is back asswards .. */
+	if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+		onoff = !onoff;
+
+	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+
+	if (onoff)
+		/* Turn off phy power saving */
+		reg1 &= ~phy_power[port];
+	else
+		reg1 |= phy_power[port];
+
+	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	sky2_pci_read32(hw, PCI_DEV_REG1);
+	udelay(100);
+}
+
 /* Force a renegotiation */
 static void sky2_phy_reinit(struct sky2_port *sky2)
 {
@@ -760,9 +767,10 @@
 /* Update chip's next pointer */
 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
 {
+	q = Y2_QADDR(q, PREF_UNIT_PUT_IDX);
 	wmb();
-	sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
-	mmiowb();
+	sky2_write16(hw, q, idx);
+	sky2_read16(hw, q);
 }
 
 
@@ -949,14 +957,16 @@
 /*
  * It appears the hardware has a bug in the FIFO logic that
  * cause it to hang if the FIFO gets overrun and the receive buffer
- * is not aligned. ALso alloc_skb() won't align properly if slab
- * debugging is enabled.
+ * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is
+ * aligned except if slab debugging is enabled.
  */
-static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask)
+static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev,
+					     unsigned int length,
+					     gfp_t gfp_mask)
 {
 	struct sk_buff *skb;
 
-	skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask);
+	skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask);
 	if (likely(skb)) {
 		unsigned long p	= (unsigned long) skb->data;
 		skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
@@ -992,7 +1002,8 @@
 	for (i = 0; i < sky2->rx_pending; i++) {
 		struct ring_info *re = sky2->rx_ring + i;
 
-		re->skb = sky2_alloc_skb(sky2->rx_bufsize, GFP_KERNEL);
+		re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize,
+					 GFP_KERNEL);
 		if (!re->skb)
 			goto nomem;
 
@@ -1080,6 +1091,8 @@
 	if (!sky2->rx_ring)
 		goto err_out;
 
+	sky2_phy_power(hw, port, 1);
+
 	sky2_mac_init(hw, port);
 
 	/* Determine available ram buffer space (in 4K blocks).
@@ -1184,7 +1197,6 @@
 	struct sky2_tx_le *le = NULL;
 	struct tx_ring_info *re;
 	unsigned i, len;
-	int avail;
 	dma_addr_t mapping;
 	u32 addr64;
 	u16 mss;
@@ -1234,25 +1246,18 @@
 	/* Check for TCP Segmentation Offload */
 	mss = skb_shinfo(skb)->gso_size;
 	if (mss != 0) {
-		/* just drop the packet if non-linear expansion fails */
-		if (skb_header_cloned(skb) &&
-		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
-			dev_kfree_skb(skb);
-			goto out_unlock;
-		}
-
 		mss += ((skb->h.th->doff - 5) * 4);	/* TCP options */
 		mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
 		mss += ETH_HLEN;
-	}
 
-	if (mss != sky2->tx_last_mss) {
-		le = get_tx_le(sky2);
-		le->tx.tso.size = cpu_to_le16(mss);
-		le->tx.tso.rsvd = 0;
-		le->opcode = OP_LRGLEN | HW_OWNER;
-		le->ctrl = 0;
-		sky2->tx_last_mss = mss;
+		if (mss != sky2->tx_last_mss) {
+			le = get_tx_le(sky2);
+			le->tx.tso.size = cpu_to_le16(mss);
+			le->tx.tso.rsvd = 0;
+			le->opcode = OP_LRGLEN | HW_OWNER;
+			le->ctrl = 0;
+			sky2->tx_last_mss = mss;
+		}
 	}
 
 	ctrl = 0;
@@ -1280,12 +1285,17 @@
 		if (skb->nh.iph->protocol == IPPROTO_UDP)
 			ctrl |= UDPTCP;
 
-		le = get_tx_le(sky2);
-		le->tx.csum.start = cpu_to_le16(hdr);
-		le->tx.csum.offset = cpu_to_le16(offset);
-		le->length = 0;	/* initial checksum value */
-		le->ctrl = 1;	/* one packet */
-		le->opcode = OP_TCPLISW | HW_OWNER;
+		if (hdr != sky2->tx_csum_start || offset != sky2->tx_csum_offset) {
+			sky2->tx_csum_start = hdr;
+			sky2->tx_csum_offset = offset;
+
+			le = get_tx_le(sky2);
+			le->tx.csum.start = cpu_to_le16(hdr);
+			le->tx.csum.offset = cpu_to_le16(offset);
+			le->length = 0;	/* initial checksum value */
+			le->ctrl = 1;	/* one packet */
+			le->opcode = OP_TCPLISW | HW_OWNER;
+		}
 	}
 
 	le = get_tx_le(sky2);
@@ -1320,23 +1330,18 @@
 		le->opcode = OP_BUFFER | HW_OWNER;
 
 		fre = sky2->tx_ring
-		    + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
+			+ RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
 		pci_unmap_addr_set(fre, mapaddr, mapping);
 	}
 
 	re->idx = sky2->tx_prod;
 	le->ctrl |= EOP;
 
-	avail = tx_avail(sky2);
-	if (mss != 0 || avail < TX_MIN_PENDING) {
- 		le->ctrl |= FRC_STAT;
-		if (avail <= MAX_SKB_TX_LE)
-			netif_stop_queue(dev);
-	}
+	if (tx_avail(sky2) <= MAX_SKB_TX_LE)
+		netif_stop_queue(dev);
 
 	sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
 
-out_unlock:
 	spin_unlock(&sky2->tx_lock);
 
 	dev->trans_start = jiffies;
@@ -1421,7 +1426,7 @@
 	/* Stop more packets from being queued */
 	netif_stop_queue(dev);
 
-	sky2_phy_reset(hw, port);
+	sky2_gmac_reset(hw, port);
 
 	/* Stop transmitter */
 	sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
@@ -1469,6 +1474,8 @@
 	imask &= ~portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
+	sky2_phy_power(hw, port, 0);
+
 	/* turn off LED's */
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 
@@ -1832,15 +1839,16 @@
  * For small packets or errors, just reuse existing skb.
  * For larger packets, get new buffer.
  */
-static struct sk_buff *sky2_receive(struct sky2_port *sky2,
+static struct sk_buff *sky2_receive(struct net_device *dev,
 				    u16 length, u32 status)
 {
+ 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct ring_info *re = sky2->rx_ring + sky2->rx_next;
 	struct sk_buff *skb = NULL;
 
 	if (unlikely(netif_msg_rx_status(sky2)))
 		printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
-		       sky2->netdev->name, sky2->rx_next, status, length);
+		       dev->name, sky2->rx_next, status, length);
 
 	sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
 	prefetch(sky2->rx_ring + sky2->rx_next);
@@ -1851,11 +1859,11 @@
 	if (!(status & GMR_FS_RX_OK))
 		goto resubmit;
 
-	if (length > sky2->netdev->mtu + ETH_HLEN)
+	if (length > dev->mtu + ETH_HLEN)
 		goto oversize;
 
 	if (length < copybreak) {
-		skb = alloc_skb(length + 2, GFP_ATOMIC);
+		skb = netdev_alloc_skb(dev, length + 2);
 		if (!skb)
 			goto resubmit;
 
@@ -1870,7 +1878,7 @@
 	} else {
 		struct sk_buff *nskb;
 
-		nskb = sky2_alloc_skb(sky2->rx_bufsize, GFP_ATOMIC);
+		nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC);
 		if (!nskb)
 			goto resubmit;
 
@@ -1900,7 +1908,7 @@
 
 	if (netif_msg_rx_err(sky2) && net_ratelimit())
 		printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
-		       sky2->netdev->name, status, length);
+		       dev->name, status, length);
 
 	if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
 		sky2->net_stats.rx_length_errors++;
@@ -1926,12 +1934,6 @@
 	}
 }
 
-/* Is status ring empty or is there more to do? */
-static inline int sky2_more_work(const struct sky2_hw *hw)
-{
-	return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
-}
-
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
@@ -1960,11 +1962,10 @@
 
 		switch (le->opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
-			skb = sky2_receive(sky2, length, status);
+			skb = sky2_receive(dev, length, status);
 			if (!skb)
 				break;
 
-			skb->dev = dev;
 			skb->protocol = eth_type_trans(skb, dev);
 			dev->last_rx = jiffies;
 
@@ -2022,6 +2023,9 @@
 		}
 	}
 
+	/* Fully processed status ring so clear irq */
+	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
 exit_loop:
 	if (buf_write[0]) {
 		sky2 = netdev_priv(hw->dev[0]);
@@ -2231,19 +2235,16 @@
 		sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
 	work_done = sky2_status_intr(hw, work_limit);
-	*budget -= work_done;
-	dev0->quota -= work_done;
+	if (work_done < work_limit) {
+		netif_rx_complete(dev0);
 
-	if (status & Y2_IS_STAT_BMU)
-		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
-	if (sky2_more_work(hw))
+		sky2_read32(hw, B0_Y2_SP_LISR);
+		return 0;
+	} else {
+		*budget -= work_done;
+		dev0->quota -= work_done;
 		return 1;
-
-	netif_rx_complete(dev0);
-
-	sky2_read32(hw, B0_Y2_SP_LISR);
-	return 0;
+	}
 }
 
 static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2409,7 +2410,7 @@
 	sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
 
 	for (i = 0; i < hw->ports; i++)
-		sky2_phy_reset(hw, i);
+		sky2_gmac_reset(hw, i);
 
 	memset(hw->st_le, 0, STATUS_LE_BYTES);
 	hw->st_idx = 0;
@@ -3200,6 +3201,8 @@
 	struct pci_dev *pdev = hw->pdev;
 	int err;
 
+	init_waitqueue_head (&hw->msi_wait);
+
 	sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
 
 	err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw);
@@ -3209,10 +3212,8 @@
 		return err;
 	}
 
-	init_waitqueue_head (&hw->msi_wait);
-
 	sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
-	wmb();
+	sky2_read8(hw, B0_CTST);
 
 	wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10);
 
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 2db8d19..fa8af9f 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1748,7 +1748,6 @@
 	INIT_SUM= 1<<3,
 	LOCK_SUM= 1<<4,
 	INS_VLAN= 1<<5,
-	FRC_STAT= 1<<6,
 	EOP	= 1<<7,
 };
 
@@ -1844,6 +1843,8 @@
 	u32		     tx_addr64;
 	u16		     tx_pending;
 	u16		     tx_last_mss;
+	u16		     tx_csum_start;
+	u16		     tx_csum_offset;
 
 	struct ring_info     *rx_ring ____cacheline_aligned_in_smp;
 	struct sky2_rx_le    *rx_le;
diff --git a/drivers/net/slhc.c b/drivers/net/slhc.c
index 3a1b713..9a540e2 100644
--- a/drivers/net/slhc.c
+++ b/drivers/net/slhc.c
@@ -94,27 +94,23 @@
 	register struct cstate *ts;
 	struct slcompress *comp;
 
-	comp = (struct slcompress *)kmalloc(sizeof(struct slcompress),
-					    GFP_KERNEL);
+	comp = kzalloc(sizeof(struct slcompress), GFP_KERNEL);
 	if (! comp)
 		goto out_fail;
-	memset(comp, 0, sizeof(struct slcompress));
 
 	if ( rslots > 0  &&  rslots < 256 ) {
 		size_t rsize = rslots * sizeof(struct cstate);
-		comp->rstate = (struct cstate *) kmalloc(rsize, GFP_KERNEL);
+		comp->rstate = kzalloc(rsize, GFP_KERNEL);
 		if (! comp->rstate)
 			goto out_free;
-		memset(comp->rstate, 0, rsize);
 		comp->rslot_limit = rslots - 1;
 	}
 
 	if ( tslots > 0  &&  tslots < 256 ) {
 		size_t tsize = tslots * sizeof(struct cstate);
-		comp->tstate = (struct cstate *) kmalloc(tsize, GFP_KERNEL);
+		comp->tstate = kzalloc(tsize, GFP_KERNEL);
 		if (! comp->tstate)
 			goto out_free2;
-		memset(comp->tstate, 0, tsize);
 		comp->tslot_limit = tslots - 1;
 	}
 
@@ -141,9 +137,9 @@
 	return comp;
 
 out_free2:
-	kfree((unsigned char *)comp->rstate);
+	kfree(comp->rstate);
 out_free:
-	kfree((unsigned char *)comp);
+	kfree(comp);
 out_fail:
 	return NULL;
 }
@@ -700,20 +696,6 @@
 EXPORT_SYMBOL(slhc_uncompress);
 EXPORT_SYMBOL(slhc_toss);
 
-#ifdef MODULE
-
-int init_module(void)
-{
-	printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California\n");
-	return 0;
-}
-
-void cleanup_module(void)
-{
-	return;
-}
-
-#endif /* MODULE */
 #else /* CONFIG_INET */
 
 
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 0b15290..4438fe8 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -55,8 +55,6 @@
 			 )
 #endif
 
-
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index c0a62b0..8e1f620 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -2053,7 +2053,7 @@
 		return -ENODEV;
 	}
 
-	return pci_module_init (&starfire_driver);
+	return pci_register_driver(&starfire_driver);
 }
 
 
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 698568e..c243a80 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -17,6 +17,8 @@
 	Support and updates available at
 	http://www.scyld.com/network/sundance.html
 	[link no longer provides useful info -jgarzik]
+	Archives of the mailing list are still available at
+	http://www.beowulf.org/pipermail/netdrivers/
 
 */
 
@@ -646,7 +648,7 @@
 	/* Reset the chip to erase previous misconfiguration. */
 	if (netif_msg_hw(np))
 		printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
-	iowrite16(0x00ff, ioaddr + ASICCtrl + 2);
+	sundance_reset(dev, 0x00ff << 16);
 	if (netif_msg_hw(np))
 		printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
 
@@ -1075,13 +1077,8 @@
 	
 	/* Reset tx logic, TxListPtr will be cleaned */
 	iowrite16 (TxDisable, ioaddr + MACCtrl1);
-	iowrite16 (TxReset | DMAReset | FIFOReset | NetworkReset,
-			ioaddr + ASICCtrl + 2);
-	for (i=50; i > 0; i--) {
-		if ((ioread16(ioaddr + ASICCtrl + 2) & ResetBusy) == 0)
-			break;
-		mdelay(1);
-	}
+	sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16);
+
 	/* free all tx skbuff */
 	for (i = 0; i < TX_RING_SIZE; i++) {
 		skb = np->tx_skbuff[i];
@@ -1736,7 +1733,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init(&sundance_driver);
+	return pci_register_driver(&sundance_driver);
 }
 
 static void __exit sundance_exit(void)
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index b70bbd7..1a441a8 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -3194,7 +3194,7 @@
 
 static int __init gem_init(void)
 {
-	return pci_module_init(&gem_driver);
+	return pci_register_driver(&gem_driver);
 }
 
 static void __exit gem_cleanup(void)
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 0e3fdf7..ec04136 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1566,20 +1566,21 @@
 static int __devinit sunlance_sbus_probe(struct of_device *dev, const struct of_device_id *match)
 {
 	struct sbus_dev *sdev = to_sbus_device(&dev->dev);
-	struct device_node *dp = dev->node;
 	int err;
 
-	if (!strcmp(dp->name, "le")) {
+	if (sdev->parent) {
+		struct of_device *parent = &sdev->parent->ofdev;
+
+		if (!strcmp(parent->node->name, "ledma")) {
+			struct sbus_dma *ledma = find_ledma(to_sbus_device(&parent->dev));
+
+			err = sparc_lance_probe_one(sdev, ledma, NULL);
+		} else if (!strcmp(parent->node->name, "lebuffer")) {
+			err = sparc_lance_probe_one(sdev, NULL, to_sbus_device(&parent->dev));
+		} else
+			err = sparc_lance_probe_one(sdev, NULL, NULL);
+	} else
 		err = sparc_lance_probe_one(sdev, NULL, NULL);
-	} else if (!strcmp(dp->name, "ledma")) {
-		struct sbus_dma *ledma = find_ledma(sdev);
-
-		err = sparc_lance_probe_one(sdev->child, ledma, NULL);
-	} else {
-		BUG_ON(strcmp(dp->name, "lebuffer"));
-
-		err = sparc_lance_probe_one(sdev->child, NULL, sdev);
-	}
 
 	return err;
 }
@@ -1604,12 +1605,6 @@
 	{
 		.name = "le",
 	},
-	{
-		.name = "ledma",
-	},
-	{
-		.name = "lebuffer",
-	},
 	{},
 };
 
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 8b53ded..39460fa 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1725,7 +1725,7 @@
 
 static int __init tc35815_init_module(void)
 {
-	return pci_module_init(&tc35815_driver);
+	return pci_register_driver(&tc35815_driver);
 }
 
 static void __exit tc35815_cleanup_module(void)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index eafabb2..d6e2a68 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11819,7 +11819,7 @@
 
 static int __init tg3_init(void)
 {
-	return pci_module_init(&tg3_driver);
+	return pci_register_driver(&tg3_driver);
 }
 
 static void __exit tg3_cleanup(void)
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 465921e..412390b 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -1815,7 +1815,7 @@
 
 static int __init xl_pci_init (void)
 {
-	return pci_module_init (&xl_3c359_driver);
+	return pci_register_driver(&xl_3c359_driver);
 }
 
 
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 28d968f..0d66700 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -1998,7 +1998,7 @@
 };
 
 static int __init streamer_init_module(void) {
-  return pci_module_init(&streamer_pci_driver);
+  return pci_register_driver(&streamer_pci_driver);
 }
 
 static void __exit streamer_cleanup_module(void) {
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index d05c5aa..350a73e 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -2172,7 +2172,7 @@
 #ifdef MODULE
 	printk("%s", version);
 #endif
-	return pci_module_init (&de_driver);
+	return pci_register_driver(&de_driver);
 }
 
 static void __exit de_exit (void)
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 75ff14a..e661d0a9 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -5754,7 +5754,7 @@
 	int err = 0;
 
 #ifdef CONFIG_PCI
-	err = pci_module_init (&de4x5_pci_driver);
+	err = pci_register_driver(&de4x5_pci_driver);
 #endif
 #ifdef CONFIG_EISA
 	err |= eisa_driver_register (&de4x5_eisa_driver);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 4e5b0f2..66dade5 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -2039,7 +2039,7 @@
 	if (HPNA_NoiseFloor > 15)
 		HPNA_NoiseFloor = 0;
 
-	rc = pci_module_init(&dmfe_driver);
+	rc = pci_register_driver(&dmfe_driver);
 	if (rc < 0)
 		return rc;
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 7351831..e1987ec 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1849,7 +1849,7 @@
 	tulip_max_interrupt_work = max_interrupt_work;
 
 	/* probe for and init boards */
-	return pci_module_init (&tulip_driver);
+	return pci_register_driver(&tulip_driver);
 }
 
 
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index fd64b2b..c4c720e 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -1702,7 +1702,6 @@
 
 static int __init uli526x_init_module(void)
 {
-	int rc;
 
 	printk(version);
 	printed_version = 1;
@@ -1714,22 +1713,19 @@
 	if (cr6set)
 		uli526x_cr6_user_set = cr6set;
 
- 	switch(mode) {
+ 	switch (mode) {
    	case ULI526X_10MHF:
 	case ULI526X_100MHF:
 	case ULI526X_10MFD:
 	case ULI526X_100MFD:
 		uli526x_media_mode = mode;
 		break;
-	default:uli526x_media_mode = ULI526X_AUTO;
+	default:
+		uli526x_media_mode = ULI526X_AUTO;
 		break;
 	}
 
-	rc = pci_module_init(&uli526x_driver);
-	if (rc < 0)
-		return rc;
-
-	return 0;
+	return pci_register_driver(&uli526x_driver);
 }
 
 
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index eba9083..6b82d14 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1689,7 +1689,7 @@
 static int __init w840_init(void)
 {
 	printk(version);
-	return pci_module_init(&w840_driver);
+	return pci_register_driver(&w840_driver);
 }
 
 static void __exit w840_exit(void)
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index 17ca7dc..d797b7b 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -1707,7 +1707,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init(&xircom_driver);
+	return pci_register_driver(&xircom_driver);
 }
 
 
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 4103c37..1014461 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -2660,7 +2660,7 @@
 static int __init
 typhoon_init(void)
 {
-	return pci_module_init(&typhoon_driver);
+	return pci_register_driver(&typhoon_driver);
 }
 
 static void __exit
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index ae97108..efeb10b 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -2005,7 +2005,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init(&rhine_driver);
+	return pci_register_driver(&rhine_driver);
 }
 
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index aa9cd92..e266db1 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2250,7 +2250,7 @@
 	int ret;
 
 	velocity_register_notifier();
-	ret = pci_module_init(&velocity_driver);
+	ret = pci_register_driver(&velocity_driver);
 	if (ret < 0)
 		velocity_unregister_notifier();
 	return ret;
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 496c3d5..4665ef2 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -262,25 +262,6 @@
 	dma_addr_t skb_dma;
 };
 
-/**
- *	alloc_rd_info		-	allocate an rd info block
- *
- *	Alocate and initialize a receive info structure used for keeping
- *	track of kernel side information related to each receive
- *	descriptor we are using
- */
-
-static inline struct velocity_rd_info *alloc_rd_info(void)
-{
-	struct velocity_rd_info *ptr;
-	if ((ptr = kmalloc(sizeof(struct velocity_rd_info), GFP_ATOMIC)) == NULL)
-		return NULL;
-	else {
-		memset(ptr, 0, sizeof(struct velocity_rd_info));
-		return ptr;
-	}
-}
-
 /*
  *	Used to track transmit side buffers.
  */
diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c
index 430b1f6..a5e7ce1 100644
--- a/drivers/net/wan/cycx_main.c
+++ b/drivers/net/wan/cycx_main.c
@@ -40,7 +40,6 @@
 * 1998/08/08	acme		Initial version.
 */
 
-#include <linux/config.h>	/* OS configuration options */
 #include <linux/stddef.h>	/* offsetof(), etc. */
 #include <linux/errno.h>	/* return codes */
 #include <linux/string.h>	/* inline memset(), etc. */
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 6e1ec5b..7369875 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -28,7 +28,6 @@
  *		2 of the License, or (at your option) any later version.
  */
 
-#include <linux/config.h> /* for CONFIG_DLCI_COUNT */
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 684af43..af4d415 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -2062,7 +2062,7 @@
 
 static int __init dscc4_init_module(void)
 {
-	return pci_module_init(&dscc4_driver);
+	return pci_register_driver(&dscc4_driver);
 }
 
 static void __exit dscc4_cleanup_module(void)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 3705db04a..564351a 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2697,7 +2697,7 @@
 	for (i = 0; i < FST_MAX_CARDS; i++)
 		fst_card_array[i] = NULL;
 	spin_lock_init(&fst_work_q_lock);
-	return pci_module_init(&fst_driver);
+	return pci_register_driver(&fst_driver);
 }
 
 static void __exit
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 39f4424..7b5d81d 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -1790,7 +1790,7 @@
 
 static int __init init_lmc(void)
 {
-    return pci_module_init(&lmc_driver);
+    return pci_register_driver(&lmc_driver);
 }
 
 static void __exit exit_lmc(void)
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 567efff..56e6940 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -3677,7 +3677,7 @@
 
 static int __init cpc_init(void)
 {
-	return pci_module_init(&cpc_driver);
+	return pci_register_driver(&cpc_driver);
 }
 
 static void __exit cpc_cleanup_module(void)
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index 4df61fa..a6b9c33 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -476,7 +476,7 @@
 		printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
 		return -EINVAL;
 	}
-	return pci_module_init(&pci200_pci_driver);
+	return pci_register_driver(&pci200_pci_driver);
 }
 
 
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 7628c2d..0ba018f 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -32,7 +32,6 @@
  *		2 of the License, or (at your option) any later version.
  */
 
-#include <linux/config.h> /* for CONFIG_DLCI_MAX */
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index b2031df..ec68f7d 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -837,7 +837,7 @@
 #ifdef MODULE
 	printk(KERN_INFO "%s\n", version);
 #endif
-	return pci_module_init(&wanxl_pci_driver);
+	return pci_register_driver(&wanxl_pci_driver);
 }
 
 static void __exit wanxl_cleanup_module(void)
diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c
index d425c3c..3bfa791 100644
--- a/drivers/net/wireless/atmel_pci.c
+++ b/drivers/net/wireless/atmel_pci.c
@@ -76,7 +76,7 @@
 
 static int __init atmel_init_module(void)
 {
-	return pci_module_init(&atmel_driver);
+	return pci_register_driver(&atmel_driver);
 }
 
 static void __exit atmel_cleanup_module(void)
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 5d5dab6..d2db8eb 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6532,7 +6532,7 @@
 	printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
 	printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
 
-	ret = pci_module_init(&ipw2100_pci_driver);
+	ret = pci_register_driver(&ipw2100_pci_driver);
 
 #ifdef CONFIG_IPW2100_DEBUG
 	ipw2100_debug_level = debug;
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index fa245f1..f29ec0e 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -11788,7 +11788,7 @@
 	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
 	printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
 
-	ret = pci_module_init(&ipw_driver);
+	ret = pci_register_driver(&ipw_driver);
 	if (ret) {
 		IPW_ERROR("Unable to initialize PCI module\n");
 		return ret;
diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c
index bf05b90..eaf3d13 100644
--- a/drivers/net/wireless/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco_nortel.c
@@ -304,7 +304,7 @@
 static int __init orinoco_nortel_init(void)
 {
 	printk(KERN_DEBUG "%s\n", version);
-	return pci_module_init(&orinoco_nortel_driver);
+	return pci_register_driver(&orinoco_nortel_driver);
 }
 
 static void __exit orinoco_nortel_exit(void)
diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c
index 1759c54..97a8b4f 100644
--- a/drivers/net/wireless/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco_pci.c
@@ -244,7 +244,7 @@
 static int __init orinoco_pci_init(void)
 {
 	printk(KERN_DEBUG "%s\n", version);
-	return pci_module_init(&orinoco_pci_driver);
+	return pci_register_driver(&orinoco_pci_driver);
 }
 
 static void __exit orinoco_pci_exit(void)
diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c
index 7f006f6..31162ac 100644
--- a/drivers/net/wireless/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco_plx.c
@@ -351,7 +351,7 @@
 static int __init orinoco_plx_init(void)
 {
 	printk(KERN_DEBUG "%s\n", version);
-	return pci_module_init(&orinoco_plx_driver);
+	return pci_register_driver(&orinoco_plx_driver);
 }
 
 static void __exit orinoco_plx_exit(void)
diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c
index 0831721..7c7b960 100644
--- a/drivers/net/wireless/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco_tmd.c
@@ -228,7 +228,7 @@
 static int __init orinoco_tmd_init(void)
 {
 	printk(KERN_DEBUG "%s\n", version);
-	return pci_module_init(&orinoco_tmd_driver);
+	return pci_register_driver(&orinoco_tmd_driver);
 }
 
 static void __exit orinoco_tmd_exit(void)
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 09fc17a..f692dcc 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -313,7 +313,7 @@
 
 	__bug_on_wrong_struct_sizes ();
 
-	return pci_module_init(&prism54_driver);
+	return pci_register_driver(&prism54_driver);
 }
 
 /* by the time prism54_module_exit() terminates, as a postcondition
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index fd31885..ccaf28e 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -467,6 +467,7 @@
 		     struct net_device *dev)
 {
 	struct neighbour *neighbor_entry;
+	int ret = 0;
 
 	neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev);
 
@@ -474,10 +475,11 @@
 		neighbor_entry->used = jiffies;
 		if (neighbor_entry->nud_state & NUD_VALID) {
 			memcpy(haddr, neighbor_entry->ha, dev->addr_len);
-			return 1;
+			ret = 1;
 		}
+		neigh_release(neighbor_entry);
 	}
-	return 0;
+	return ret;
 }
 
 static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr,
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 8459a18..b6b2474 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -1434,7 +1434,7 @@
 #ifdef MODULE
 	printk(version);
 #endif
-	return pci_module_init (&yellowfin_driver);
+	return pci_register_driver(&yellowfin_driver);
 }
 
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7317742..17e709e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -667,6 +667,7 @@
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index d8e9b95..25c1ef6 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -52,7 +52,7 @@
 static void dasd_free_queue(struct dasd_device * device);
 static void dasd_flush_request_queue(struct dasd_device *);
 static void dasd_int_handler(struct ccw_device *, unsigned long, struct irb *);
-static void dasd_flush_ccw_queue(struct dasd_device *, int);
+static int dasd_flush_ccw_queue(struct dasd_device *, int);
 static void dasd_tasklet(struct dasd_device *);
 static void do_kick_device(void *data);
 
@@ -60,6 +60,7 @@
  * SECTION: Operations on the device structure.
  */
 static wait_queue_head_t dasd_init_waitq;
+static wait_queue_head_t dasd_flush_wq;
 
 /*
  * Allocate memory for a new device structure.
@@ -121,7 +122,7 @@
 /*
  * Make a new device known to the system.
  */
-static inline int
+static int
 dasd_state_new_to_known(struct dasd_device *device)
 {
 	int rc;
@@ -145,7 +146,7 @@
 /*
  * Let the system forget about a device.
  */
-static inline void
+static int
 dasd_state_known_to_new(struct dasd_device * device)
 {
 	/* Disable extended error reporting for this device. */
@@ -163,12 +164,13 @@
 
 	/* Give up reference we took in dasd_state_new_to_known. */
 	dasd_put_device(device);
+	return 0;
 }
 
 /*
  * Request the irq line for the device.
  */
-static inline int
+static int
 dasd_state_known_to_basic(struct dasd_device * device)
 {
 	int rc;
@@ -192,17 +194,23 @@
 /*
  * Release the irq line for the device. Terminate any running i/o.
  */
-static inline void
+static int
 dasd_state_basic_to_known(struct dasd_device * device)
 {
+	int rc;
+
 	dasd_gendisk_free(device);
-	dasd_flush_ccw_queue(device, 1);
+	rc = dasd_flush_ccw_queue(device, 1);
+	if (rc)
+		return rc;
+
 	DBF_DEV_EVENT(DBF_EMERG, device, "%p debug area deleted", device);
 	if (device->debug_area != NULL) {
 		debug_unregister(device->debug_area);
 		device->debug_area = NULL;
 	}
 	device->state = DASD_STATE_KNOWN;
+	return 0;
 }
 
 /*
@@ -219,7 +227,7 @@
  * In case the analysis returns an error, the device setup is stopped
  * (a fake disk was already added to allow formatting).
  */
-static inline int
+static int
 dasd_state_basic_to_ready(struct dasd_device * device)
 {
 	int rc;
@@ -247,25 +255,31 @@
  * Forget format information. Check if the target level is basic
  * and if it is create fake disk for formatting.
  */
-static inline void
+static int
 dasd_state_ready_to_basic(struct dasd_device * device)
 {
-	dasd_flush_ccw_queue(device, 0);
+	int rc;
+
+	rc = dasd_flush_ccw_queue(device, 0);
+	if (rc)
+		return rc;
 	dasd_destroy_partitions(device);
 	dasd_flush_request_queue(device);
 	device->blocks = 0;
 	device->bp_block = 0;
 	device->s2b_shift = 0;
 	device->state = DASD_STATE_BASIC;
+	return 0;
 }
 
 /*
  * Back to basic.
  */
-static inline void
+static int
 dasd_state_unfmt_to_basic(struct dasd_device * device)
 {
 	device->state = DASD_STATE_BASIC;
+	return 0;
 }
 
 /*
@@ -273,7 +287,7 @@
  * the requeueing of requests from the linux request queue to the
  * ccw queue.
  */
-static inline int
+static int
 dasd_state_ready_to_online(struct dasd_device * device)
 {
 	device->state = DASD_STATE_ONLINE;
@@ -284,16 +298,17 @@
 /*
  * Stop the requeueing of requests again.
  */
-static inline void
+static int
 dasd_state_online_to_ready(struct dasd_device * device)
 {
 	device->state = DASD_STATE_READY;
+	return 0;
 }
 
 /*
  * Device startup state changes.
  */
-static inline int
+static int
 dasd_increase_state(struct dasd_device *device)
 {
 	int rc;
@@ -329,30 +344,37 @@
 /*
  * Device shutdown state changes.
  */
-static inline int
+static int
 dasd_decrease_state(struct dasd_device *device)
 {
+	int rc;
+
+	rc = 0;
 	if (device->state == DASD_STATE_ONLINE &&
 	    device->target <= DASD_STATE_READY)
-		dasd_state_online_to_ready(device);
+		rc = dasd_state_online_to_ready(device);
 
-	if (device->state == DASD_STATE_READY &&
+	if (!rc &&
+	    device->state == DASD_STATE_READY &&
 	    device->target <= DASD_STATE_BASIC)
-		dasd_state_ready_to_basic(device);
+		rc = dasd_state_ready_to_basic(device);
 
-	if (device->state == DASD_STATE_UNFMT &&
+	if (!rc &&
+	    device->state == DASD_STATE_UNFMT &&
 	    device->target <= DASD_STATE_BASIC)
-		dasd_state_unfmt_to_basic(device);
+		rc = dasd_state_unfmt_to_basic(device);
 
-	if (device->state == DASD_STATE_BASIC &&
+	if (!rc &&
+	    device->state == DASD_STATE_BASIC &&
 	    device->target <= DASD_STATE_KNOWN)
-		dasd_state_basic_to_known(device);
+		rc = dasd_state_basic_to_known(device);
 
-	if (device->state == DASD_STATE_KNOWN &&
+	if (!rc &&
+	    device->state == DASD_STATE_KNOWN &&
 	    device->target <= DASD_STATE_NEW)
-		dasd_state_known_to_new(device);
+		rc = dasd_state_known_to_new(device);
 
-	return 0;
+	return rc;
 }
 
 /*
@@ -701,6 +723,7 @@
 			cqr->retries--;
 			cqr->status = DASD_CQR_CLEAR;
 			cqr->stopclk = get_clock();
+			cqr->starttime = 0;
 			DBF_DEV_EVENT(DBF_DEBUG, device,
 				      "terminate cqr %p successful",
 				      cqr);
@@ -978,6 +1001,7 @@
 	    irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC) {
 		cqr->status = DASD_CQR_QUEUED;
 		dasd_clear_timer(device);
+		wake_up(&dasd_flush_wq);
 		dasd_schedule_bh(device);
 		return;
 	}
@@ -1241,6 +1265,10 @@
 	cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
 	if (cqr->status == DASD_CQR_IN_IO && cqr->expires != 0) {
 		if (time_after_eq(jiffies, cqr->expires + cqr->starttime)) {
+			DEV_MESSAGE(KERN_ERR, device,
+				    "internal error - timeout (%is) expired "
+				    "for cqr %p (%i retries left)",
+				    (cqr->expires/HZ), cqr, cqr->retries);
 			if (device->discipline->term_IO(cqr) != 0)
 				/* Hmpf, try again in 1/10 sec */
 				dasd_set_timer(device, 10);
@@ -1285,46 +1313,100 @@
 		dasd_set_timer(device, 50);
 }
 
+static inline int
+_wait_for_clear(struct dasd_ccw_req *cqr)
+{
+	return (cqr->status == DASD_CQR_QUEUED);
+}
+
 /*
- * Remove requests from the ccw queue.
+ * Remove all requests from the ccw queue (all = '1') or only block device
+ * requests in case all = '0'.
+ * Take care of the erp-chain (chained via cqr->refers) and remove either
+ * the whole erp-chain or none of the erp-requests.
+ * If a request is currently running, term_IO is called and the request
+ * is re-queued. Prior to removing the terminated request we need to wait
+ * for the clear-interrupt.
+ * In case termination is not possible we stop processing and just finishing
+ * the already moved requests.
  */
-static void
+static int
 dasd_flush_ccw_queue(struct dasd_device * device, int all)
 {
+	struct dasd_ccw_req *cqr, *orig, *n;
+	int rc, i;
+
 	struct list_head flush_queue;
-	struct list_head *l, *n;
-	struct dasd_ccw_req *cqr;
 
 	INIT_LIST_HEAD(&flush_queue);
 	spin_lock_irq(get_ccwdev_lock(device->cdev));
-	list_for_each_safe(l, n, &device->ccw_queue) {
-		cqr = list_entry(l, struct dasd_ccw_req, list);
+	rc = 0;
+restart:
+	list_for_each_entry_safe(cqr, n, &device->ccw_queue, list) {
+		/* get original request of erp request-chain */
+		for (orig = cqr; orig->refers != NULL; orig = orig->refers);
+
 		/* Flush all request or only block device requests? */
-		if (all == 0 && cqr->callback == dasd_end_request_cb)
+		if (all == 0 && cqr->callback != dasd_end_request_cb &&
+		    orig->callback != dasd_end_request_cb) {
 			continue;
-		if (cqr->status == DASD_CQR_IN_IO)
-			device->discipline->term_IO(cqr);
-		if (cqr->status != DASD_CQR_DONE ||
-		    cqr->status != DASD_CQR_FAILED) {
-			cqr->status = DASD_CQR_FAILED;
+		}
+		/* Check status and move request to flush_queue */
+		switch (cqr->status) {
+		case DASD_CQR_IN_IO:
+			rc = device->discipline->term_IO(cqr);
+			if (rc) {
+				/* unable to terminate requeust */
+				DEV_MESSAGE(KERN_ERR, device,
+					    "dasd flush ccw_queue is unable "
+					    " to terminate request %p",
+					    cqr);
+				/* stop flush processing */
+				goto finished;
+			}
+			break;
+		case DASD_CQR_QUEUED:
+		case DASD_CQR_ERROR:
+			/* set request to FAILED */
 			cqr->stopclk = get_clock();
+			cqr->status = DASD_CQR_FAILED;
+			break;
+		default: /* do not touch the others */
+			break;
+		}
+		/* Rechain request (including erp chain) */
+		for (i = 0; cqr != NULL; cqr = cqr->refers, i++) {
+			cqr->endclk = get_clock();
+			list_move_tail(&cqr->list, &flush_queue);
+		}
+		if (i > 1)
+			/* moved more than one request - need to restart */
+			goto restart;
+	}
+
+finished:
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+	/* Now call the callback function of flushed requests */
+restart_cb:
+	list_for_each_entry_safe(cqr, n, &flush_queue, list) {
+		if (cqr->status == DASD_CQR_CLEAR) {
+			/* wait for clear interrupt! */
+			wait_event(dasd_flush_wq, _wait_for_clear(cqr));
+			cqr->status = DASD_CQR_FAILED;
 		}
 		/* Process finished ERP request. */
 		if (cqr->refers) {
 			__dasd_process_erp(device, cqr);
-			continue;
+			/* restart list_for_xx loop since dasd_process_erp
+			 * might remove multiple elements */
+			goto restart_cb;
 		}
-		/* Rechain request on device request queue */
+		/* call the callback function */
 		cqr->endclk = get_clock();
-		list_move_tail(&cqr->list, &flush_queue);
-	}
-	spin_unlock_irq(get_ccwdev_lock(device->cdev));
-	/* Now call the callback function of flushed requests */
-	list_for_each_safe(l, n, &flush_queue) {
-		cqr = list_entry(l, struct dasd_ccw_req, list);
 		if (cqr->callback != NULL)
 			(cqr->callback)(cqr, cqr->callback_data);
 	}
+	return rc;
 }
 
 /*
@@ -1510,10 +1592,8 @@
 			if (device->discipline->term_IO) {
 				cqr->retries = -1;
 				device->discipline->term_IO(cqr);
-				/*nished =
-				 * wait (non-interruptible) for final status
-				 * because signal ist still pending
-				 */
+				/* wait (non-interruptible) for final status
+				 * because signal ist still pending */
 				spin_unlock_irq(get_ccwdev_lock(device->cdev));
 				wait_event(wait_q, _wait_for_wakeup(cqr));
 				spin_lock_irq(get_ccwdev_lock(device->cdev));
@@ -1546,19 +1626,11 @@
 _dasd_term_running_cqr(struct dasd_device *device)
 {
 	struct dasd_ccw_req *cqr;
-	int rc;
 
 	if (list_empty(&device->ccw_queue))
 		return 0;
 	cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
-	rc = device->discipline->term_IO(cqr);
-	if (rc == 0) {
-		/* termination successful */
-		cqr->status = DASD_CQR_QUEUED;
-		cqr->startclk = cqr->stopclk = 0;
-		cqr->starttime = 0;
-	}
-	return rc;
+	return device->discipline->term_IO(cqr);
 }
 
 int
@@ -1726,10 +1798,7 @@
 		return;
 
 	spin_lock_irq(&device->request_queue_lock);
-	while (!list_empty(&device->request_queue->queue_head)) {
-		req = elv_next_request(device->request_queue);
-		if (req == NULL)
-			break;
+	while ((req = elv_next_request(device->request_queue))) {
 		blkdev_dequeue_request(req);
 		dasd_end_request(req, 0);
 	}
@@ -2091,6 +2160,7 @@
 	int rc;
 
 	init_waitqueue_head(&dasd_init_waitq);
+	init_waitqueue_head(&dasd_flush_wq);
 
 	/* register 'common' DASD debug area, used for all DBF_XXX calls */
 	dasd_debug_area = debug_register("dasd", 1, 2, 8 * sizeof (long));
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 4c272b7..d163632 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -83,10 +83,12 @@
 void
 dasd_gendisk_free(struct dasd_device *device)
 {
-	del_gendisk(device->gdp);
-	device->gdp->queue = NULL;
-	put_disk(device->gdp);
-	device->gdp = NULL;
+	if (device->gdp) {
+		del_gendisk(device->gdp);
+		device->gdp->queue = NULL;
+		put_disk(device->gdp);
+		device->gdp = NULL;
+	}
 }
 
 /*
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 3cba6c9..38954f5 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -183,11 +183,9 @@
 
 	gdev->creator_id = creator_id;
 	gdev->count = argc;
-	gdev->dev = (struct device ) {
-		.bus = &ccwgroup_bus_type,
-		.parent = root,
-		.release = ccwgroup_release,
-	};
+	gdev->dev.bus = &ccwgroup_bus_type;
+	gdev->dev.parent = root;
+	gdev->dev.release = ccwgroup_release;
 
 	snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
 			gdev->cdev[0]->dev.bus_id);
@@ -391,10 +389,8 @@
 ccwgroup_driver_register (struct ccwgroup_driver *cdriver)
 {
 	/* register our new driver with the core */
-	cdriver->driver = (struct device_driver) {
-		.bus = &ccwgroup_bus_type,
-		.name = cdriver->name,
-	};
+	cdriver->driver.bus = &ccwgroup_bus_type;
+	cdriver->driver.name = cdriver->name;
 
 	return driver_register(&cdriver->driver);
 }
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 61ce3f1..c28444a 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -238,8 +238,6 @@
 	/* Check for single path devices. */
 	if (sch->schib.pmcw.pim == 0x80)
 		goto out_unreg;
-	if (sch->vpm == mask)
-		goto out_unreg;
 
 	if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
 	    (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
@@ -258,6 +256,8 @@
 	/* trigger path verification. */
 	if (sch->driver && sch->driver->verify)
 		sch->driver->verify(&sch->dev);
+	else if (sch->vpm == mask)
+		goto out_unreg;
 out_unlock:
 	spin_unlock_irq(&sch->lock);
 	return 0;
@@ -1391,10 +1391,8 @@
 	/* fill in status, etc. */
 	chp->id = chpid;
 	chp->state = 1;
-	chp->dev = (struct device) {
-		.parent  = &css[0]->device,
-		.release = chp_release,
-	};
+	chp->dev.parent = &css[0]->device;
+	chp->dev.release = chp_release;
 	snprintf(chp->dev.bus_id, BUS_ID_SIZE, "chp0.%x", chpid);
 
 	/* Obtain channel path description and fill it in. */
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 585fa04..646da56 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -556,12 +556,11 @@
 			 struct ccw_device *sibling)
 {
 	struct device *dev;
-	struct match_data data = {
-		.devno   = devno,
-		.ssid    = ssid,
-		.sibling = sibling,
-	};
+	struct match_data data;
 
+	data.devno = devno;
+	data.ssid = ssid;
+	data.sibling = sibling;
 	dev = bus_find_device(&ccw_bus_type, NULL, &data, match_devno);
 
 	return dev ? to_ccwdev(dev) : NULL;
@@ -835,10 +834,8 @@
 		return -ENOMEM;
 	}
 	atomic_set(&cdev->private->onoff, 0);
-	cdev->dev = (struct device) {
-		.parent = &sch->dev,
-		.release = ccw_device_release,
-	};
+	cdev->dev.parent = &sch->dev;
+	cdev->dev.release = ccw_device_release;
 	INIT_LIST_HEAD(&cdev->private->kick_work.entry);
 	/* Do first half of device_register. */
 	device_initialize(&cdev->dev);
@@ -977,9 +974,7 @@
 	int rc;
 
 	/* Initialize the ccw_device structure. */
-	cdev->dev = (struct device) {
-		.parent = &sch->dev,
-	};
+	cdev->dev.parent= &sch->dev;
 	rc = io_subchannel_recog(cdev, sch);
 	if (rc)
 		return rc;
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 6d91c2e..35e162b 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -267,12 +267,10 @@
 			notify = 1;
 		}
 		/* fill out sense information */
-		cdev->id = (struct ccw_device_id) {
-			.cu_type   = cdev->private->senseid.cu_type,
-			.cu_model  = cdev->private->senseid.cu_model,
-			.dev_type  = cdev->private->senseid.dev_type,
-			.dev_model = cdev->private->senseid.dev_model,
-		};
+		cdev->id.cu_type   = cdev->private->senseid.cu_type;
+		cdev->id.cu_model  = cdev->private->senseid.cu_model;
+		cdev->id.dev_type  = cdev->private->senseid.dev_type;
+		cdev->id.dev_model = cdev->private->senseid.dev_model;
 		if (notify) {
 			cdev->private->state = DEV_STATE_OFFLINE;
 			if (same_dev) {
@@ -566,12 +564,10 @@
 		/* Deliver fake irb to device driver, if needed. */
 		if (cdev->private->flags.fake_irb) {
 			memset(&cdev->private->irb, 0, sizeof(struct irb));
-			cdev->private->irb.scsw = (struct scsw) {
-				.cc = 1,
-				.fctl = SCSW_FCTL_START_FUNC,
-				.actl = SCSW_ACTL_START_PEND,
-				.stctl = SCSW_STCTL_STATUS_PEND,
-			};
+			cdev->private->irb.scsw.cc = 1;
+			cdev->private->irb.scsw.fctl = SCSW_FCTL_START_FUNC;
+			cdev->private->irb.scsw.actl = SCSW_ACTL_START_PEND;
+			cdev->private->irb.scsw.stctl = SCSW_STCTL_STATUS_PEND;
 			cdev->private->flags.fake_irb = 0;
 			if (cdev->handler)
 				cdev->handler(cdev, cdev->private->intparm,
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index 32610fd..1693a10 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -24,6 +24,21 @@
 #include "ioasm.h"
 
 /*
+ * Helper function called from interrupt context to decide whether an
+ * operation should be tried again.
+ */
+static int __ccw_device_should_retry(struct scsw *scsw)
+{
+	/* CC is only valid if start function bit is set. */
+	if ((scsw->fctl & SCSW_FCTL_START_FUNC) && scsw->cc == 1)
+		return 1;
+	/* No more activity. For sense and set PGID we stubbornly try again. */
+	if (!scsw->actl)
+		return 1;
+	return 0;
+}
+
+/*
  * Start Sense Path Group ID helper function. Used in ccw_device_recog
  * and ccw_device_sense_pgid.
  */
@@ -155,10 +170,10 @@
 	int ret;
 
 	irb = (struct irb *) __LC_IRB;
-	/* Retry sense pgid for cc=1. */
+
 	if (irb->scsw.stctl ==
 	    (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
-		if (irb->scsw.cc == 1) {
+		if (__ccw_device_should_retry(&irb->scsw)) {
 			ret = __ccw_device_sense_pgid_start(cdev);
 			if (ret && ret != -EBUSY)
 				ccw_device_sense_pgid_done(cdev, ret);
@@ -391,10 +406,10 @@
 	int ret;
 
 	irb = (struct irb *) __LC_IRB;
-	/* Retry set pgid for cc=1. */
+
 	if (irb->scsw.stctl ==
 	    (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
-		if (irb->scsw.cc == 1)
+		if (__ccw_device_should_retry(&irb->scsw))
 			__ccw_device_verify_start(cdev);
 		return;
 	}
@@ -494,10 +509,10 @@
 	int ret;
 
 	irb = (struct irb *) __LC_IRB;
-	/* Retry set pgid for cc=1. */
+
 	if (irb->scsw.stctl ==
 	    (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
-		if (irb->scsw.cc == 1)
+		if (__ccw_device_should_retry(&irb->scsw))
 			__ccw_device_disband_start(cdev);
 		return;
 	}
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index cd1979d..851e483 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -458,11 +458,11 @@
  * growing *huge*, we use this function to collapse some 70 entries
  * in the PCI table into one, for sanity's and compactness's sake.
  */
-static unsigned short timedia_single_port[] = {
+static const unsigned short timedia_single_port[] = {
 	0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
 };
 
-static unsigned short timedia_dual_port[] = {
+static const unsigned short timedia_dual_port[] = {
 	0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
 	0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 
 	0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 
@@ -470,35 +470,34 @@
 	0xD079, 0
 };
 
-static unsigned short timedia_quad_port[] = {
+static const unsigned short timedia_quad_port[] = {
 	0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 
 	0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 
 	0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
 	0xB157, 0
 };
 
-static unsigned short timedia_eight_port[] = {
+static const unsigned short timedia_eight_port[] = {
 	0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 
 	0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 };
 
 static const struct timedia_struct {
 	int num;
-	unsigned short *ids;
+	const unsigned short *ids;
 } timedia_data[] = {
 	{ 1, timedia_single_port },
 	{ 2, timedia_dual_port },
 	{ 4, timedia_quad_port },
-	{ 8, timedia_eight_port },
-	{ 0, NULL }
+	{ 8, timedia_eight_port }
 };
 
 static int pci_timedia_init(struct pci_dev *dev)
 {
-	unsigned short *ids;
+	const unsigned short *ids;
 	int i, j;
 
-	for (i = 0; timedia_data[i].num; i++) {
+	for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
 		ids = timedia_data[i].ids;
 		for (j = 0; ids[j]; j++)
 			if (dev->subsystem_device == ids[j])
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 80ef7d4..372e47f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2377,6 +2377,9 @@
 		return (port1->iobase == port2->iobase) &&
 		       (port1->hub6   == port2->hub6);
 	case UPIO_MEM:
+	case UPIO_MEM32:
+	case UPIO_AU:
+	case UPIO_TSI:
 		return (port1->mapbase == port2->mapbase);
 	}
 	return 0;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 4fe1bec..30299c6 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -117,6 +117,8 @@
 	struct usb_ep		*in_ep, *out_ep, *status_ep;
 	const struct usb_endpoint_descriptor
 				*in, *out, *status;
+
+	spinlock_t		req_lock;
 	struct list_head	tx_reqs, rx_reqs;
 
 	struct net_device	*net;
@@ -1066,21 +1068,31 @@
 	 */
 	if (dev->in) {
 		usb_ep_disable (dev->in_ep);
+		spin_lock(&dev->req_lock);
 		while (likely (!list_empty (&dev->tx_reqs))) {
 			req = container_of (dev->tx_reqs.next,
 						struct usb_request, list);
 			list_del (&req->list);
+
+			spin_unlock(&dev->req_lock);
 			usb_ep_free_request (dev->in_ep, req);
+			spin_lock(&dev->req_lock);
 		}
+		spin_unlock(&dev->req_lock);
 	}
 	if (dev->out) {
 		usb_ep_disable (dev->out_ep);
+		spin_lock(&dev->req_lock);
 		while (likely (!list_empty (&dev->rx_reqs))) {
 			req = container_of (dev->rx_reqs.next,
 						struct usb_request, list);
 			list_del (&req->list);
+
+			spin_unlock(&dev->req_lock);
 			usb_ep_free_request (dev->out_ep, req);
+			spin_lock(&dev->req_lock);
 		}
+		spin_unlock(&dev->req_lock);
 	}
 
 	if (dev->status) {
@@ -1659,9 +1671,9 @@
 	if (retval) {
 		DEBUG (dev, "rx submit --> %d\n", retval);
 		dev_kfree_skb_any (skb);
-		spin_lock (&dev->lock);
+		spin_lock(&dev->req_lock);
 		list_add (&req->list, &dev->rx_reqs);
-		spin_unlock (&dev->lock);
+		spin_unlock(&dev->req_lock);
 	}
 	return retval;
 }
@@ -1730,8 +1742,9 @@
 		dev_kfree_skb_any (skb);
 	if (!netif_running (dev->net)) {
 clean:
-		/* nobody reading rx_reqs, so no dev->lock */
+		spin_lock(&dev->req_lock);
 		list_add (&req->list, &dev->rx_reqs);
+		spin_unlock(&dev->req_lock);
 		req = NULL;
 	}
 	if (req)
@@ -1782,15 +1795,18 @@
 {
 	int status;
 
+	spin_lock(&dev->req_lock);
 	status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
 	if (status < 0)
 		goto fail;
 	status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
 	if (status < 0)
 		goto fail;
-	return 0;
+	goto done;
 fail:
 	DEBUG (dev, "can't alloc requests\n");
+done:
+	spin_unlock(&dev->req_lock);
 	return status;
 }
 
@@ -1800,21 +1816,21 @@
 	unsigned long		flags;
 
 	/* fill unused rxq slots with some skb */
-	spin_lock_irqsave (&dev->lock, flags);
+	spin_lock_irqsave(&dev->req_lock, flags);
 	while (!list_empty (&dev->rx_reqs)) {
 		req = container_of (dev->rx_reqs.next,
 				struct usb_request, list);
 		list_del_init (&req->list);
-		spin_unlock_irqrestore (&dev->lock, flags);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
 
 		if (rx_submit (dev, req, gfp_flags) < 0) {
 			defer_kevent (dev, WORK_RX_MEMORY);
 			return;
 		}
 
-		spin_lock_irqsave (&dev->lock, flags);
+		spin_lock_irqsave(&dev->req_lock, flags);
 	}
-	spin_unlock_irqrestore (&dev->lock, flags);
+	spin_unlock_irqrestore(&dev->req_lock, flags);
 }
 
 static void eth_work (void *_dev)
@@ -1848,9 +1864,9 @@
 	}
 	dev->stats.tx_packets++;
 
-	spin_lock (&dev->lock);
+	spin_lock(&dev->req_lock);
 	list_add (&req->list, &dev->tx_reqs);
-	spin_unlock (&dev->lock);
+	spin_unlock(&dev->req_lock);
 	dev_kfree_skb_any (skb);
 
 	atomic_dec (&dev->tx_qlen);
@@ -1896,12 +1912,12 @@
 		/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
 	}
 
-	spin_lock_irqsave (&dev->lock, flags);
+	spin_lock_irqsave(&dev->req_lock, flags);
 	req = container_of (dev->tx_reqs.next, struct usb_request, list);
 	list_del (&req->list);
 	if (list_empty (&dev->tx_reqs))
 		netif_stop_queue (net);
-	spin_unlock_irqrestore (&dev->lock, flags);
+	spin_unlock_irqrestore(&dev->req_lock, flags);
 
 	/* no buffer copies needed, unless the network stack did it
 	 * or the hardware can't use skb buffers.
@@ -1955,11 +1971,11 @@
 drop:
 		dev->stats.tx_dropped++;
 		dev_kfree_skb_any (skb);
-		spin_lock_irqsave (&dev->lock, flags);
+		spin_lock_irqsave(&dev->req_lock, flags);
 		if (list_empty (&dev->tx_reqs))
 			netif_start_queue (net);
 		list_add (&req->list, &dev->tx_reqs);
-		spin_unlock_irqrestore (&dev->lock, flags);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
 	}
 	return 0;
 }
@@ -2378,6 +2394,7 @@
 		return status;
 	dev = netdev_priv(net);
 	spin_lock_init (&dev->lock);
+	spin_lock_init (&dev->req_lock);
 	INIT_WORK (&dev->work, eth_work, dev);
 	INIT_LIST_HEAD (&dev->tx_reqs);
 	INIT_LIST_HEAD (&dev->rx_reqs);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 66c3f61..431e8f3 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -372,7 +372,7 @@
 		 * need to change any toggles in this URB */
 		td = list_entry(urbp->td_list.next, struct uhci_td, list);
 		if (toggle > 1 || uhci_toggle(td_token(td)) == toggle) {
-			td = list_entry(urbp->td_list.next, struct uhci_td,
+			td = list_entry(urbp->td_list.prev, struct uhci_td,
 					list);
 			toggle = uhci_toggle(td_token(td)) ^ 1;
 
@@ -1348,7 +1348,7 @@
 		}
 
 		uhci_giveback_urb(uhci, qh, urb, regs);
-		if (status < 0)
+		if (status < 0 && qh->type != USB_ENDPOINT_XFER_ISOC)
 			break;
 	}
 
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 8ea9c91..acb24c6 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1411,17 +1411,54 @@
 		warn("timeout initializing reports");
 }
 
+#define USB_VENDOR_ID_GTCO		0x078c
+#define USB_DEVICE_ID_GTCO_90		0x0090
+#define USB_DEVICE_ID_GTCO_100		0x0100
+#define USB_DEVICE_ID_GTCO_101		0x0101
+#define USB_DEVICE_ID_GTCO_103		0x0103
+#define USB_DEVICE_ID_GTCO_104		0x0104
+#define USB_DEVICE_ID_GTCO_105		0x0105
+#define USB_DEVICE_ID_GTCO_106		0x0106
+#define USB_DEVICE_ID_GTCO_107		0x0107
+#define USB_DEVICE_ID_GTCO_108		0x0108
+#define USB_DEVICE_ID_GTCO_200		0x0200
+#define USB_DEVICE_ID_GTCO_201		0x0201
+#define USB_DEVICE_ID_GTCO_202		0x0202
+#define USB_DEVICE_ID_GTCO_203		0x0203
+#define USB_DEVICE_ID_GTCO_204		0x0204
+#define USB_DEVICE_ID_GTCO_205		0x0205
+#define USB_DEVICE_ID_GTCO_206		0x0206
+#define USB_DEVICE_ID_GTCO_207		0x0207
+#define USB_DEVICE_ID_GTCO_300		0x0300
+#define USB_DEVICE_ID_GTCO_301		0x0301
+#define USB_DEVICE_ID_GTCO_302		0x0302
+#define USB_DEVICE_ID_GTCO_303		0x0303
+#define USB_DEVICE_ID_GTCO_304		0x0304
+#define USB_DEVICE_ID_GTCO_305		0x0305
+#define USB_DEVICE_ID_GTCO_306		0x0306
+#define USB_DEVICE_ID_GTCO_307		0x0307
+#define USB_DEVICE_ID_GTCO_308		0x0308
+#define USB_DEVICE_ID_GTCO_309		0x0309
+#define USB_DEVICE_ID_GTCO_400		0x0400
+#define USB_DEVICE_ID_GTCO_401		0x0401
+#define USB_DEVICE_ID_GTCO_402		0x0402
+#define USB_DEVICE_ID_GTCO_403		0x0403
+#define USB_DEVICE_ID_GTCO_404		0x0404
+#define USB_DEVICE_ID_GTCO_404		0x0405
+#define USB_DEVICE_ID_GTCO_500		0x0500
+#define USB_DEVICE_ID_GTCO_501		0x0501
+#define USB_DEVICE_ID_GTCO_502		0x0502
+#define USB_DEVICE_ID_GTCO_503		0x0503
+#define USB_DEVICE_ID_GTCO_504		0x0504
+#define USB_DEVICE_ID_GTCO_1000		0x1000
+#define USB_DEVICE_ID_GTCO_1001		0x1001
+#define USB_DEVICE_ID_GTCO_1002		0x1002
+#define USB_DEVICE_ID_GTCO_1003		0x1003
+#define USB_DEVICE_ID_GTCO_1004		0x1004
+#define USB_DEVICE_ID_GTCO_1005		0x1005
+#define USB_DEVICE_ID_GTCO_1006		0x1006
+
 #define USB_VENDOR_ID_WACOM		0x056a
-#define USB_DEVICE_ID_WACOM_PENPARTNER	0x0000
-#define USB_DEVICE_ID_WACOM_GRAPHIRE	0x0010
-#define USB_DEVICE_ID_WACOM_INTUOS	0x0020
-#define USB_DEVICE_ID_WACOM_PL		0x0030
-#define USB_DEVICE_ID_WACOM_INTUOS2	0x0040
-#define USB_DEVICE_ID_WACOM_VOLITO	0x0060
-#define USB_DEVICE_ID_WACOM_PTU		0x0003
-#define USB_DEVICE_ID_WACOM_INTUOS3	0x00B0
-#define USB_DEVICE_ID_WACOM_CINTIQ	0x003F
-#define USB_DEVICE_ID_WACOM_DTF         0x00C0
 
 #define USB_VENDOR_ID_ACECAD		0x0460
 #define USB_DEVICE_ID_ACECAD_FLAIR	0x0004
@@ -1588,6 +1625,51 @@
 	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
@@ -1617,49 +1699,6 @@
 	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
@@ -1778,6 +1817,10 @@
 	char *rdesc;
 	int n, len, insize = 0;
 
+        /* Ignore all Wacom devices */
+        if (dev->descriptor.idVendor == USB_VENDOR_ID_WACOM)
+                return NULL;
+
 	for (n = 0; hid_blacklist[n].idVendor; n++)
 		if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) &&
 			(hid_blacklist[n].idProduct == le16_to_cpu(dev->descriptor.idProduct)))
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index a54752c..0064380 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -131,6 +131,7 @@
 #define	VENDOR_COREGA		0x07aa
 #define	VENDOR_DLINK		0x2001
 #define	VENDOR_ELCON		0x0db7
+#define	VENDOR_ELECOM		0x056e
 #define	VENDOR_ELSA		0x05cc
 #define	VENDOR_GIGABYTE		0x1044
 #define	VENDOR_HAWKING		0x0e66
@@ -233,6 +234,8 @@
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
 		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+		DEFAULT_GPIO_RESET  | PEGASUS_II )
 PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index bd09232..a72685b 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -972,6 +972,7 @@
 	if (dev) {
 		set_bit(RTL8150_UNPLUG, &dev->flags);
 		tasklet_disable(&dev->tl);
+		tasklet_kill(&dev->tl);
 		unregister_netdev(dev->netdev);
 		unlink_all_urbs(dev);
 		free_all_urbs(dev);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4a803d6..b130e17 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -241,16 +241,6 @@
 		"Finecam S5",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 
-/* Patch for Kyocera Finecam L3
- * Submitted by Michael Krauth <michael.krauth@web.de>
- * and Alessandro Fracchetti <al.fracchetti@tin.it>
- */
-UNUSUAL_DEV(  0x0482, 0x0105, 0x0100, 0x0100,
-		"Kyocera",
-		"Finecam L3",
-		US_SC_SCSI, US_PR_BULK, NULL,
-		US_FL_FIX_INQUIRY),
-
 /* Reported by Paul Stewart <stewart@wetlogic.net>
  * This entry is needed because the device reports Sub=ff */
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
@@ -599,6 +589,13 @@
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
 
+/* floppy reports multiple luns */
+UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
+               "SAMSUNG",
+               "SFD-321U [FW 0C]",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_SINGLE_LUN ),
+
 		
 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299, 
 		"Y-E Data",
@@ -1257,6 +1254,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
+UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"M600i",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 3e827e0..276a215 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1801,10 +1801,14 @@
 static void aty128_bl_set_power(struct fb_info *info, int power)
 {
 	mutex_lock(&info->bl_mutex);
-	up(&info->bl_dev->sem);
-	info->bl_dev->props->power = power;
-	__aty128_bl_update_status(info->bl_dev);
-	down(&info->bl_dev->sem);
+
+	if (info->bl_dev) {
+		down(&info->bl_dev->sem);
+		info->bl_dev->props->power = power;
+		__aty128_bl_update_status(info->bl_dev);
+		up(&info->bl_dev->sem);
+	}
+
 	mutex_unlock(&info->bl_mutex);
 }
 
@@ -1828,7 +1832,7 @@
 	bd = backlight_device_register(name, par, &aty128_bl_data);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
-		printk("aty128: Backlight registration failed\n");
+		printk(KERN_WARNING "aty128: Backlight registration failed\n");
 		goto error;
 	}
 
@@ -1839,11 +1843,11 @@
 		219 * FB_BACKLIGHT_MAX / MAX_LEVEL);
 	mutex_unlock(&info->bl_mutex);
 
-	up(&bd->sem);
+	down(&bd->sem);
 	bd->props->brightness = aty128_bl_data.max_brightness;
 	bd->props->power = FB_BLANK_UNBLANK;
 	bd->props->update_status(bd);
-	down(&bd->sem);
+	up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	mutex_lock(&pmac_backlight_mutex);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 053ff63..19a71f0 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2200,10 +2200,14 @@
 static void aty_bl_set_power(struct fb_info *info, int power)
 {
 	mutex_lock(&info->bl_mutex);
-	up(&info->bl_dev->sem);
-	info->bl_dev->props->power = power;
-	__aty_bl_update_status(info->bl_dev);
-	down(&info->bl_dev->sem);
+
+	if (info->bl_dev) {
+		down(&info->bl_dev->sem);
+		info->bl_dev->props->power = power;
+		__aty_bl_update_status(info->bl_dev);
+		up(&info->bl_dev->sem);
+	}
+
 	mutex_unlock(&info->bl_mutex);
 }
 
@@ -2223,7 +2227,7 @@
 	bd = backlight_device_register(name, par, &aty_bl_data);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
-		printk("aty: Backlight registration failed\n");
+		printk(KERN_WARNING "aty: Backlight registration failed\n");
 		goto error;
 	}
 
@@ -2234,11 +2238,11 @@
 		0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL);
 	mutex_unlock(&info->bl_mutex);
 
-	up(&bd->sem);
+	down(&bd->sem);
 	bd->props->brightness = aty_bl_data.max_brightness;
 	bd->props->power = FB_BLANK_UNBLANK;
 	bd->props->update_status(bd);
-	down(&bd->sem);
+	up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	mutex_lock(&pmac_backlight_mutex);
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index 1755ddd..585eb7b 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -195,11 +195,11 @@
 		217 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL);
 	mutex_unlock(&rinfo->info->bl_mutex);
 
-	up(&bd->sem);
+	down(&bd->sem);
 	bd->props->brightness = radeon_bl_data.max_brightness;
 	bd->props->power = FB_BLANK_UNBLANK;
 	bd->props->update_status(bd);
-	down(&bd->sem);
+	up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	mutex_lock(&pmac_backlight_mutex);
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c
index b45f577..5b75ae4 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/nvidia/nv_backlight.c
@@ -113,10 +113,14 @@
 void nvidia_bl_set_power(struct fb_info *info, int power)
 {
 	mutex_lock(&info->bl_mutex);
-	up(&info->bl_dev->sem);
-	info->bl_dev->props->power = power;
-	__nvidia_bl_update_status(info->bl_dev);
-	down(&info->bl_dev->sem);
+
+	if (info->bl_dev) {
+		down(&info->bl_dev->sem);
+		info->bl_dev->props->power = power;
+		__nvidia_bl_update_status(info->bl_dev);
+		up(&info->bl_dev->sem);
+	}
+
 	mutex_unlock(&info->bl_mutex);
 }
 
@@ -140,7 +144,7 @@
 	bd = backlight_device_register(name, par, &nvidia_bl_data);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
-		printk("nvidia: Backlight registration failed\n");
+		printk(KERN_WARNING "nvidia: Backlight registration failed\n");
 		goto error;
 	}
 
@@ -151,11 +155,11 @@
 		0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
 	mutex_unlock(&info->bl_mutex);
 
-	up(&bd->sem);
+	down(&bd->sem);
 	bd->props->brightness = nvidia_bl_data.max_brightness;
 	bd->props->power = FB_BLANK_UNBLANK;
 	bd->props->update_status(bd);
-	down(&bd->sem);
+	up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	mutex_lock(&pmac_backlight_mutex);
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index 76fc9d3..8ddb47a 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -355,10 +355,14 @@
 static void riva_bl_set_power(struct fb_info *info, int power)
 {
 	mutex_lock(&info->bl_mutex);
-	up(&info->bl_dev->sem);
-	info->bl_dev->props->power = power;
-	__riva_bl_update_status(info->bl_dev);
-	down(&info->bl_dev->sem);
+
+	if (info->bl_dev) {
+		down(&info->bl_dev->sem);
+		info->bl_dev->props->power = power;
+		__riva_bl_update_status(info->bl_dev);
+		up(&info->bl_dev->sem);
+	}
+
 	mutex_unlock(&info->bl_mutex);
 }
 
@@ -382,7 +386,7 @@
 	bd = backlight_device_register(name, par, &riva_bl_data);
 	if (IS_ERR(bd)) {
 		info->bl_dev = NULL;
-		printk("riva: Backlight registration failed\n");
+		printk(KERN_WARNING "riva: Backlight registration failed\n");
 		goto error;
 	}
 
@@ -393,11 +397,11 @@
 		0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
 	mutex_unlock(&info->bl_mutex);
 
-	up(&bd->sem);
+	down(&bd->sem);
 	bd->props->brightness = riva_bl_data.max_brightness;
 	bd->props->power = FB_BLANK_UNBLANK;
 	bd->props->update_status(bd);
-	down(&bd->sem);
+	up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	mutex_lock(&pmac_backlight_mutex);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index a61d17e..0feb3bd 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,13 @@
+Version 1.45
+------------
+Do not time out lockw calls when using posix extensions. Do not
+time out requests if server still responding reasonably fast
+on requests on other threads.  Improve POSIX locking emulation,
+(lock cancel now works, and unlock of merged range works even
+to Windows servers now).  Fix oops on mount to lanman servers
+(win9x, os/2 etc.) when null password.  Do not send listxattr
+(SMB to query all EAs) if nouser_xattr specified.
+
 Version 1.44
 ------------
 Rewritten sessionsetup support, including support for legacy SMB
diff --git a/fs/cifs/README b/fs/cifs/README
index 7986d0d..5f0e1bd 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -408,7 +408,7 @@
   user_xattr    Allow getting and setting user xattrs as OS/2 EAs (extended
 		attributes) to the server (default) e.g. via setfattr 
 		and getfattr utilities. 
-  nouser_xattr  Do not allow getfattr/setfattr to get/set xattrs 
+  nouser_xattr  Do not allow getfattr/setfattr to get/set/list xattrs 
   mapchars      Translate six of the seven reserved characters (not backslash)
 			*?<>|:
 		to the remap range (above 0xF000), which also
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index a89efaf..4bc250b 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -277,7 +277,8 @@
 		return;
 
 	memset(password_with_pad, 0, CIFS_ENCPWD_SIZE);
-	strncpy(password_with_pad, ses->password, CIFS_ENCPWD_SIZE);
+	if(ses->password)
+		strncpy(password_with_pad, ses->password, CIFS_ENCPWD_SIZE);
 
 	if((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0)
 		if(extended_security & CIFSSEC_MAY_PLNTXT) {
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index c28ede5..3cd7500 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -402,7 +402,6 @@
 };
 #endif
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
 static void cifs_umount_begin(struct vfsmount * vfsmnt, int flags)
 {
 	struct cifs_sb_info *cifs_sb;
@@ -422,7 +421,7 @@
 		tcon->tidStatus = CifsExiting;
 	up(&tcon->tconSem);
 
-	/* cancel_brl_requests(tcon); */
+	/* cancel_brl_requests(tcon); */ /* BB mark all brl mids as exiting */
 	/* cancel_notify_requests(tcon); */
 	if(tcon->ses && tcon->ses->server)
 	{
@@ -438,7 +437,6 @@
 
 	return;
 }
-#endif	
 
 static int cifs_remount(struct super_block *sb, int *flags, char *data)
 {
@@ -457,9 +455,7 @@
    unless later we add lazy close of inodes or unless the kernel forgets to call
    us with the same number of releases (closes) as opens */
 	.show_options = cifs_show_options,
-#ifdef CONFIG_CIFS_EXPERIMENTAL
 	.umount_begin   = cifs_umount_begin,
-#endif
 	.remount_fs = cifs_remount,
 };
 
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 8f75c6f..39ee8ef 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -100,5 +100,5 @@
 extern ssize_t	cifs_listxattr(struct dentry *, char *, size_t);
 extern int cifs_ioctl (struct inode * inode, struct file * filep,
 		       unsigned int command, unsigned long arg);
-#define CIFS_VERSION   "1.44"
+#define CIFS_VERSION   "1.45"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 6d7cf5f..b24006c 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -3,6 +3,7 @@
  *
  *   Copyright (C) International Business Machines  Corp., 2002,2006
  *   Author(s): Steve French (sfrench@us.ibm.com)
+ *              Jeremy Allison (jra@samba.org)
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Lesser General Public License as published
@@ -158,7 +159,8 @@
 	/* 16th byte of RFC1001 workstation name is always null */
 	char workstation_RFC1001_name[SERVER_NAME_LEN_WITH_NULL];
 	__u32 sequence_number; /* needed for CIFS PDU signature */
-	char mac_signing_key[CIFS_SESS_KEY_SIZE + 16]; 
+	char mac_signing_key[CIFS_SESS_KEY_SIZE + 16];
+	unsigned long lstrp; /* when we got last response from this server */
 };
 
 /*
@@ -266,14 +268,14 @@
 };
 
 /*
- * This info hangs off the cifsFileInfo structure.  This is used to track
- * byte stream locks on the file
+ * This info hangs off the cifsFileInfo structure, pointed to by llist.
+ * This is used to track byte stream locks on the file
  */
 struct cifsLockInfo {
-	struct cifsLockInfo *next;
-	int start;
-	int length;
-	int type;
+	struct list_head llist;	/* pointer to next cifsLockInfo */
+	__u64 offset;
+	__u64 length;
+	__u8 type;
 };
 
 /*
@@ -304,6 +306,8 @@
 	/* lock scope id (0 if none) */
 	struct file * pfile; /* needed for writepage */
 	struct inode * pInode; /* needed for oplock break */
+	struct semaphore lock_sem;
+	struct list_head llist; /* list of byte range locks we have. */
 	unsigned closePend:1;	/* file is marked to close */
 	unsigned invalidHandle:1;  /* file closed via session abend */
 	atomic_t wrtPending;   /* handle in use - defer close */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index a5ddc62..b35c55c 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -50,6 +50,10 @@
 extern int SendReceive2(const unsigned int /* xid */ , struct cifsSesInfo *,
 			struct kvec *, int /* nvec to send */, 
 			int * /* type of buf returned */ , const int long_op);
+extern int SendReceiveBlockingLock(const unsigned int /* xid */ , struct cifsTconInfo *,
+				struct smb_hdr * /* input */ ,
+				struct smb_hdr * /* out */ ,
+				int * /* bytes returned */);
 extern int checkSMBhdr(struct smb_hdr *smb, __u16 mid);
 extern int checkSMB(struct smb_hdr *smb, __u16 mid, int length);
 extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 19678c5..075d8fb 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -477,7 +477,7 @@
 		/* BB get server time for time conversions and add
 		code to use it and timezone since this is not UTC */	
 
-		if (rsp->EncryptionKeyLength == CIFS_CRYPTO_KEY_SIZE) {
+		if (rsp->EncryptionKeyLength == cpu_to_le16(CIFS_CRYPTO_KEY_SIZE)) {
 			memcpy(server->cryptKey, rsp->EncryptionKey,
 				CIFS_CRYPTO_KEY_SIZE);
 		} else if (server->secMode & SECMODE_PW_ENCRYPT) {
@@ -1460,8 +1460,13 @@
 	pSMB->hdr.smb_buf_length += count;
 	pSMB->ByteCount = cpu_to_le16(count);
 
-	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+	if (waitFlag) {
+		rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
+			(struct smb_hdr *) pSMBr, &bytes_returned);
+	} else {
+		rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
 			 (struct smb_hdr *) pSMBr, &bytes_returned, timeout);
+	}
 	cifs_stats_inc(&tcon->num_locks);
 	if (rc) {
 		cFYI(1, ("Send error in Lock = %d", rc));
@@ -1484,6 +1489,7 @@
 	char *data_offset;
 	struct cifs_posix_lock *parm_data;
 	int rc = 0;
+	int timeout = 0;
 	int bytes_returned = 0;
 	__u16 params, param_offset, offset, byte_count, count;
 
@@ -1503,7 +1509,6 @@
 	pSMB->MaxSetupCount = 0;
 	pSMB->Reserved = 0;
 	pSMB->Flags = 0;
-	pSMB->Timeout = 0;
 	pSMB->Reserved2 = 0;
 	param_offset = offsetof(struct smb_com_transaction2_sfi_req, Fid) - 4;
 	offset = param_offset + params;
@@ -1529,8 +1534,13 @@
 			(((char *) &pSMB->hdr.Protocol) + offset);
 
 	parm_data->lock_type = cpu_to_le16(lock_type);
-	if(waitFlag)
+	if(waitFlag) {
+		timeout = 3;  /* blocking operation, no timeout */
 		parm_data->lock_flags = cpu_to_le16(1);
+		pSMB->Timeout = cpu_to_le32(-1);
+	} else
+		pSMB->Timeout = 0;
+
 	parm_data->pid = cpu_to_le32(current->tgid);
 	parm_data->start = cpu_to_le64(pLockData->fl_start);
 	parm_data->length = cpu_to_le64(len);  /* normalize negative numbers */
@@ -1541,8 +1551,14 @@
 	pSMB->Reserved4 = 0;
 	pSMB->hdr.smb_buf_length += byte_count;
 	pSMB->ByteCount = cpu_to_le16(byte_count);
-	rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
-			(struct smb_hdr *) pSMBr, &bytes_returned, 0);
+	if (waitFlag) {
+		rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
+			(struct smb_hdr *) pSMBr, &bytes_returned);
+	} else {
+		rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
+			(struct smb_hdr *) pSMBr, &bytes_returned, timeout);
+	}
+
 	if (rc) {
 		cFYI(1, ("Send error in Posix Lock = %d", rc));
 	} else if (get_flag) {
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 876eb9e..5d394c7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -182,6 +182,7 @@
 
 	while ((server->tcpStatus != CifsExiting) && (server->tcpStatus != CifsGood))
 	{
+		try_to_freeze();
 		if(server->protocolType == IPV6) {
 			rc = ipv6_connect(&server->addr.sockAddr6,&server->ssocket);
 		} else {
@@ -612,6 +613,10 @@
 #ifdef CONFIG_CIFS_STATS2
 				mid_entry->when_received = jiffies;
 #endif
+				/* so we do not time out requests to  server
+				which is still responding (since server could
+				be busy but not dead) */
+				server->lstrp = jiffies;
 				break;
 			}
 		}
@@ -1266,33 +1271,35 @@
 
 	read_lock(&GlobalSMBSeslock);
 	list_for_each(tmp, &GlobalTreeConnectionList) {
-		cFYI(1, ("Next tcon - "));
+		cFYI(1, ("Next tcon"));
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
 		if (tcon->ses) {
 			if (tcon->ses->server) {
 				cFYI(1,
-				     (" old ip addr: %x == new ip %x ?",
+				     ("old ip addr: %x == new ip %x ?",
 				      tcon->ses->server->addr.sockAddr.sin_addr.
 				      s_addr, new_target_ip_addr));
 				if (tcon->ses->server->addr.sockAddr.sin_addr.
 				    s_addr == new_target_ip_addr) {
-	/* BB lock tcon and server and tcp session and increment use count here? */
+	/* BB lock tcon, server and tcp session and increment use count here? */
 					/* found a match on the TCP session */
 					/* BB check if reconnection needed */
-					cFYI(1,("Matched ip, old UNC: %s == new: %s ?",
+					cFYI(1,("IP match, old UNC: %s new: %s",
 					      tcon->treeName, uncName));
 					if (strncmp
 					    (tcon->treeName, uncName,
 					     MAX_TREE_SIZE) == 0) {
 						cFYI(1,
-						     ("Matched UNC, old user: %s == new: %s ?",
+						     ("and old usr: %s new: %s",
 						      tcon->treeName, uncName));
 						if (strncmp
 						    (tcon->ses->userName,
 						     userName,
 						     MAX_USERNAME_SIZE) == 0) {
 							read_unlock(&GlobalSMBSeslock);
-							return tcon;/* also matched user (smb session)*/
+							/* matched smb session
+							(user name */
+							return tcon;
 						}
 					}
 				}
@@ -1969,7 +1976,18 @@
 				}
 					
 				cFYI(1,("Negotiate caps 0x%x",(int)cap));
-
+#ifdef CONFIG_CIFS_DEBUG2
+				if(cap & CIFS_UNIX_FCNTL_CAP)
+					cFYI(1,("FCNTL cap"));
+				if(cap & CIFS_UNIX_EXTATTR_CAP)
+					cFYI(1,("EXTATTR cap"));
+				if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP)
+					cFYI(1,("POSIX path cap"));
+				if(cap & CIFS_UNIX_XATTR_CAP)
+					cFYI(1,("XATTR cap"));
+				if(cap & CIFS_UNIX_POSIX_ACL_CAP)
+					cFYI(1,("POSIX ACL cap"));
+#endif /* CIFS_DEBUG2 */
 				if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) {
 					cFYI(1,("setting capabilities failed"));
 				}
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index ba4cbe9..914239d5 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -267,6 +267,10 @@
 			pCifsFile->invalidHandle = FALSE;
 			pCifsFile->closePend     = FALSE;
 			init_MUTEX(&pCifsFile->fh_sem);
+			init_MUTEX(&pCifsFile->lock_sem);
+			INIT_LIST_HEAD(&pCifsFile->llist);
+			atomic_set(&pCifsFile->wrtPending,0);
+
 			/* set the following in open now 
 				pCifsFile->pfile = file; */
 			write_lock(&GlobalSMBSeslock);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 944d2b9..e9c5ba9 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -5,6 +5,7 @@
  * 
  *   Copyright (C) International Business Machines  Corp., 2002,2003
  *   Author(s): Steve French (sfrench@us.ibm.com)
+ *              Jeremy Allison (jra@samba.org)
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Lesser General Public License as published
@@ -47,6 +48,8 @@
 	private_data->netfid = netfid;
 	private_data->pid = current->tgid;	
 	init_MUTEX(&private_data->fh_sem);
+	init_MUTEX(&private_data->lock_sem);
+	INIT_LIST_HEAD(&private_data->llist);
 	private_data->pfile = file; /* needed for writepage */
 	private_data->pInode = inode;
 	private_data->invalidHandle = FALSE;
@@ -473,6 +476,8 @@
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
 	if (pSMBFile) {
+		struct cifsLockInfo *li, *tmp;
+
 		pSMBFile->closePend = TRUE;
 		if (pTcon) {
 			/* no sense reconnecting to close a file that is
@@ -496,6 +501,16 @@
 						  pSMBFile->netfid);
 			}
 		}
+
+		/* Delete any outstanding lock records.
+		   We'll lose them when the file is closed anyway. */
+		down(&pSMBFile->lock_sem);
+		list_for_each_entry_safe(li, tmp, &pSMBFile->llist, llist) {
+			list_del(&li->llist);
+			kfree(li);
+		}
+		up(&pSMBFile->lock_sem);
+
 		write_lock(&GlobalSMBSeslock);
 		list_del(&pSMBFile->flist);
 		list_del(&pSMBFile->tlist);
@@ -570,6 +585,21 @@
 	return rc;
 }
 
+static int store_file_lock(struct cifsFileInfo *fid, __u64 len,
+				__u64 offset, __u8 lockType)
+{
+	struct cifsLockInfo *li = kmalloc(sizeof(struct cifsLockInfo), GFP_KERNEL);
+	if (li == NULL)
+		return -ENOMEM;
+	li->offset = offset;
+	li->length = len;
+	li->type = lockType;
+	down(&fid->lock_sem);
+	list_add(&li->llist, &fid->llist);
+	up(&fid->lock_sem);
+	return 0;
+}
+
 int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 {
 	int rc, xid;
@@ -581,6 +611,7 @@
 	struct cifsTconInfo *pTcon;
 	__u16 netfid;
 	__u8 lockType = LOCKING_ANDX_LARGE_FILES;
+	int posix_locking;
 
 	length = 1 + pfLock->fl_end - pfLock->fl_start;
 	rc = -EACCES;
@@ -639,15 +670,14 @@
 	}
 	netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
 
+	posix_locking = (cifs_sb->tcon->ses->capabilities & CAP_UNIX) &&
+			(CIFS_UNIX_FCNTL_CAP & le64_to_cpu(cifs_sb->tcon->fsUnixInfo.Capability));
 
 	/* BB add code here to normalize offset and length to
 	account for negative length which we can not accept over the
 	wire */
 	if (IS_GETLK(cmd)) {
-		if(experimEnabled && 
-		   (cifs_sb->tcon->ses->capabilities & CAP_UNIX) &&
-		   (CIFS_UNIX_FCNTL_CAP & 
-			le64_to_cpu(cifs_sb->tcon->fsUnixInfo.Capability))) {
+		if(posix_locking) {
 			int posix_lock_type;
 			if(lockType & LOCKING_ANDX_SHARED_LOCK)
 				posix_lock_type = CIFS_RDLCK;
@@ -683,10 +713,15 @@
 		FreeXid(xid);
 		return rc;
 	}
-	if (experimEnabled &&
-		(cifs_sb->tcon->ses->capabilities & CAP_UNIX) &&
-		(CIFS_UNIX_FCNTL_CAP &
-			 le64_to_cpu(cifs_sb->tcon->fsUnixInfo.Capability))) {
+
+	if (!numLock && !numUnlock) {
+		/* if no lock or unlock then nothing
+		to do since we do not know what it is */
+		FreeXid(xid);
+		return -EOPNOTSUPP;
+	}
+
+	if (posix_locking) {
 		int posix_lock_type;
 		if(lockType & LOCKING_ANDX_SHARED_LOCK)
 			posix_lock_type = CIFS_RDLCK;
@@ -695,18 +730,46 @@
 		
 		if(numUnlock == 1)
 			posix_lock_type = CIFS_UNLCK;
-		else if(numLock == 0) {
-			/* if no lock or unlock then nothing
-			to do since we do not know what it is */
-			FreeXid(xid);
-			return -EOPNOTSUPP;
-		}
+
 		rc = CIFSSMBPosixLock(xid, pTcon, netfid, 0 /* set */,
 				      length, pfLock,
 				      posix_lock_type, wait_flag);
-	} else
-		rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
-				numUnlock, numLock, lockType, wait_flag);
+	} else {
+		struct cifsFileInfo *fid = (struct cifsFileInfo *)file->private_data;
+
+		if (numLock) {
+			rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
+					0, numLock, lockType, wait_flag);
+
+			if (rc == 0) {
+				/* For Windows locks we must store them. */
+				rc = store_file_lock(fid, length,
+						pfLock->fl_start, lockType);
+			}
+		} else if (numUnlock) {
+			/* For each stored lock that this unlock overlaps
+			   completely, unlock it. */
+			int stored_rc = 0;
+			struct cifsLockInfo *li, *tmp;
+
+			down(&fid->lock_sem);
+			list_for_each_entry_safe(li, tmp, &fid->llist, llist) {
+				if (pfLock->fl_start <= li->offset &&
+						length >= li->length) {
+					stored_rc = CIFSSMBLock(xid, pTcon, netfid,
+							li->length, li->offset,
+							1, 0, li->type, FALSE);
+					if (stored_rc)
+						rc = stored_rc;
+
+					list_del(&li->llist);
+					kfree(li);
+				}
+			}
+		up(&fid->lock_sem);
+		}
+	}
+
 	if (pfLock->fl_flags & FL_POSIX)
 		posix_lock_file_wait(file, pfLock);
 	FreeXid(xid);
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index b66eff5..ce87550 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -72,6 +72,7 @@
 	{ERRinvlevel,-EOPNOTSUPP},
 	{ERRdirnotempty, -ENOTEMPTY},
 	{ERRnotlocked, -ENOLCK},
+	{ERRcancelviolation, -ENOLCK},
 	{ERRalreadyexists, -EEXIST},
 	{ERRmoredata, -EOVERFLOW},
 	{ERReasnotsupported,-EOPNOTSUPP},
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 03bbcb3..105761e 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -556,7 +556,7 @@
 		FIND_FILE_STANDARD_INFO * pFindData =
 			(FIND_FILE_STANDARD_INFO *)current_entry;
 		filename = &pFindData->FileName[0];
-		len = le32_to_cpu(pFindData->FileNameLength);
+		len = pFindData->FileNameLength;
 	} else {
 		cFYI(1,("Unknown findfirst level %d",cfile->srch_inf.info_level));
 	}
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 7202d53..d1705ab 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -372,7 +372,7 @@
 
 		/* no capabilities flags in old lanman negotiation */
 
-		pSMB->old_req.PasswordLength = CIFS_SESS_KEY_SIZE; 
+		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE); 
 		/* BB calculate hash with password */
 		/* and copy into bcc */
 
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index cd41c67..212c3c2 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -95,6 +95,7 @@
 #define ERRinvlevel		124
 #define ERRdirnotempty		145
 #define ERRnotlocked		158
+#define ERRcancelviolation	173
 #define ERRalreadyexists	183
 #define ERRbadpipe		230
 #define ERRpipebusy		231
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 17ba329..48d47b4 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -3,7 +3,8 @@
  *
  *   Copyright (C) International Business Machines  Corp., 2002,2005
  *   Author(s): Steve French (sfrench@us.ibm.com)
- *
+ *   Jeremy Allison (jra@samba.org) 2006.
+ *    
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Lesser General Public License as published
  *   by the Free Software Foundation; either version 2.1 of the License, or
@@ -36,7 +37,7 @@
 extern kmem_cache_t *cifs_oplock_cachep;
 
 static struct mid_q_entry *
-AllocMidQEntry(struct smb_hdr *smb_buffer, struct cifsSesInfo *ses)
+AllocMidQEntry(const struct smb_hdr *smb_buffer, struct cifsSesInfo *ses)
 {
 	struct mid_q_entry *temp;
 
@@ -203,6 +204,10 @@
 		rc = 0;
 	}
 
+	/* Don't want to modify the buffer as a
+	   side effect of this call. */
+	smb_buffer->smb_buf_length = smb_buf_length;
+
 	return rc;
 }
 
@@ -217,6 +222,7 @@
 	unsigned int len = iov[0].iov_len;
 	unsigned int total_len;
 	int first_vec = 0;
+	unsigned int smb_buf_length = smb_buffer->smb_buf_length;
 	
 	if(ssocket == NULL)
 		return -ENOTSOCK; /* BB eventually add reconnect code here */
@@ -293,9 +299,123 @@
 	} else
 		rc = 0;
 
+	/* Don't want to modify the buffer as a
+	   side effect of this call. */
+	smb_buffer->smb_buf_length = smb_buf_length;
+
 	return rc;
 }
 
+static int wait_for_free_request(struct cifsSesInfo *ses, const int long_op)
+{
+	if(long_op == -1) {
+		/* oplock breaks must not be held up */
+		atomic_inc(&ses->server->inFlight);
+	} else {
+		spin_lock(&GlobalMid_Lock); 
+		while(1) {        
+			if(atomic_read(&ses->server->inFlight) >= 
+					cifs_max_pending){
+				spin_unlock(&GlobalMid_Lock);
+#ifdef CONFIG_CIFS_STATS2
+				atomic_inc(&ses->server->num_waiters);
+#endif
+				wait_event(ses->server->request_q,
+					atomic_read(&ses->server->inFlight)
+					 < cifs_max_pending);
+#ifdef CONFIG_CIFS_STATS2
+				atomic_dec(&ses->server->num_waiters);
+#endif
+				spin_lock(&GlobalMid_Lock);
+			} else {
+				if(ses->server->tcpStatus == CifsExiting) {
+					spin_unlock(&GlobalMid_Lock);
+					return -ENOENT;
+				}
+
+				/* can not count locking commands against total since
+				   they are allowed to block on server */
+					
+				/* update # of requests on the wire to server */
+				if (long_op < 3)
+					atomic_inc(&ses->server->inFlight);
+				spin_unlock(&GlobalMid_Lock);
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+static int allocate_mid(struct cifsSesInfo *ses, struct smb_hdr *in_buf,
+			struct mid_q_entry **ppmidQ)
+{
+	if (ses->server->tcpStatus == CifsExiting) {
+		return -ENOENT;
+	} else if (ses->server->tcpStatus == CifsNeedReconnect) {
+		cFYI(1,("tcp session dead - return to caller to retry"));
+		return -EAGAIN;
+	} else if (ses->status != CifsGood) {
+		/* check if SMB session is bad because we are setting it up */
+		if((in_buf->Command != SMB_COM_SESSION_SETUP_ANDX) && 
+			(in_buf->Command != SMB_COM_NEGOTIATE)) {
+			return -EAGAIN;
+		} /* else ok - we are setting up session */
+	}
+	*ppmidQ = AllocMidQEntry(in_buf, ses);
+	if (*ppmidQ == NULL) {
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int wait_for_response(struct cifsSesInfo *ses, 
+			struct mid_q_entry *midQ,
+			unsigned long timeout,
+			unsigned long time_to_wait)
+{
+	unsigned long curr_timeout;
+
+	for (;;) {
+		curr_timeout = timeout + jiffies;
+		wait_event(ses->server->response_q,
+			(!(midQ->midState == MID_REQUEST_SUBMITTED)) || 
+			time_after(jiffies, curr_timeout) || 
+			((ses->server->tcpStatus != CifsGood) &&
+			 (ses->server->tcpStatus != CifsNew)));
+
+		if (time_after(jiffies, curr_timeout) &&
+			(midQ->midState == MID_REQUEST_SUBMITTED) &&
+			((ses->server->tcpStatus == CifsGood) ||
+			 (ses->server->tcpStatus == CifsNew))) {
+
+			unsigned long lrt;
+
+			/* We timed out. Is the server still
+			   sending replies ? */
+			spin_lock(&GlobalMid_Lock);
+			lrt = ses->server->lstrp;
+			spin_unlock(&GlobalMid_Lock);
+
+			/* Calculate time_to_wait past last receive time.
+			 Although we prefer not to time out if the 
+			 server is still responding - we will time
+			 out if the server takes more than 15 (or 45 
+			 or 180) seconds to respond to this request
+			 and has not responded to any request from 
+			 other threads on the client within 10 seconds */
+			lrt += time_to_wait;
+			if (time_after(jiffies, lrt)) {
+				/* No replies for time_to_wait. */
+				cERROR(1,("server not responding"));
+				return -1;
+			}
+		} else {
+			return 0;
+		}
+	}
+}
+
 int
 SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, 
 	     struct kvec *iov, int n_vec, int * pRespBufType /* ret */, 
@@ -323,75 +443,27 @@
 	/* Ensure that we do not send more than 50 overlapping requests 
 	   to the same server. We may make this configurable later or
 	   use ses->maxReq */
-	if(long_op == -1) {
-		/* oplock breaks must not be held up */
-		atomic_inc(&ses->server->inFlight);
-	} else {
-		spin_lock(&GlobalMid_Lock); 
-		while(1) {        
-			if(atomic_read(&ses->server->inFlight) >= 
-					cifs_max_pending){
-				spin_unlock(&GlobalMid_Lock);
-#ifdef CONFIG_CIFS_STATS2
-				atomic_inc(&ses->server->num_waiters);
-#endif
-				wait_event(ses->server->request_q,
-					atomic_read(&ses->server->inFlight)
-					 < cifs_max_pending);
-#ifdef CONFIG_CIFS_STATS2
-				atomic_dec(&ses->server->num_waiters);
-#endif
-				spin_lock(&GlobalMid_Lock);
-			} else {
-				if(ses->server->tcpStatus == CifsExiting) {
-					spin_unlock(&GlobalMid_Lock);
-					cifs_small_buf_release(in_buf);
-					return -ENOENT;
-				}
 
-			/* can not count locking commands against total since
-			   they are allowed to block on server */
-					
-				if(long_op < 3) {
-				/* update # of requests on the wire to server */
-					atomic_inc(&ses->server->inFlight);
-				}
-				spin_unlock(&GlobalMid_Lock);
-				break;
-			}
-		}
+	rc = wait_for_free_request(ses, long_op);
+	if (rc) {
+		cifs_small_buf_release(in_buf);
+		return rc;
 	}
+
 	/* make sure that we sign in the same order that we send on this socket 
 	   and avoid races inside tcp sendmsg code that could cause corruption
 	   of smb data */
 
 	down(&ses->server->tcpSem); 
 
-	if (ses->server->tcpStatus == CifsExiting) {
-		rc = -ENOENT;
-		goto out_unlock2;
-	} else if (ses->server->tcpStatus == CifsNeedReconnect) {
-		cFYI(1,("tcp session dead - return to caller to retry"));
-		rc = -EAGAIN;
-		goto out_unlock2;
-	} else if (ses->status != CifsGood) {
-		/* check if SMB session is bad because we are setting it up */
-		if((in_buf->Command != SMB_COM_SESSION_SETUP_ANDX) && 
-			(in_buf->Command != SMB_COM_NEGOTIATE)) {
-			rc = -EAGAIN;
-			goto out_unlock2;
-		} /* else ok - we are setting up session */
-	}
-	midQ = AllocMidQEntry(in_buf, ses);
-	if (midQ == NULL) {
+	rc = allocate_mid(ses, in_buf, &midQ);
+	if (rc) {
 		up(&ses->server->tcpSem);
 		cifs_small_buf_release(in_buf);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
-		return -ENOMEM;
+		/* Update # of requests on wire to server */
+		atomic_dec(&ses->server->inFlight); 
+		wake_up(&ses->server->request_q);
+		return rc;
 	}
 
  	rc = cifs_sign_smb2(iov, n_vec, ses->server, &midQ->sequence_number);
@@ -406,32 +478,23 @@
 	atomic_dec(&ses->server->inSend);
 	midQ->when_sent = jiffies;
 #endif
-	if(rc < 0) {
-		DeleteMidQEntry(midQ);
-		up(&ses->server->tcpSem);
-		cifs_small_buf_release(in_buf);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
-		return rc;
-	} else {
-		up(&ses->server->tcpSem);
-		cifs_small_buf_release(in_buf);
-	}
+
+	up(&ses->server->tcpSem);
+	cifs_small_buf_release(in_buf);
+
+	if(rc < 0)
+		goto out;
 
 	if (long_op == -1)
-		goto cifs_no_response_exit2;
+		goto out;
 	else if (long_op == 2) /* writes past end of file can take loong time */
 		timeout = 180 * HZ;
 	else if (long_op == 1)
 		timeout = 45 * HZ; /* should be greater than 
 			servers oplock break timeout (about 43 seconds) */
-	else if (long_op > 2) {
-		timeout = MAX_SCHEDULE_TIMEOUT;
-	} else
+	else
 		timeout = 15 * HZ;
+
 	/* wait for 15 seconds or until woken up due to response arriving or 
 	   due to last connection to this server being unmounted */
 	if (signal_pending(current)) {
@@ -441,19 +504,7 @@
 	}   
 
 	/* No user interrupts in wait - wreaks havoc with performance */
-	if(timeout != MAX_SCHEDULE_TIMEOUT) {
-		timeout += jiffies;
-		wait_event(ses->server->response_q,
-			(!(midQ->midState & MID_REQUEST_SUBMITTED)) || 
-			time_after(jiffies, timeout) || 
-			((ses->server->tcpStatus != CifsGood) &&
-			 (ses->server->tcpStatus != CifsNew)));
-	} else {
-		wait_event(ses->server->response_q,
-			(!(midQ->midState & MID_REQUEST_SUBMITTED)) || 
-			((ses->server->tcpStatus != CifsGood) &&
-			 (ses->server->tcpStatus != CifsNew)));
-	}
+	wait_for_response(ses, midQ, timeout, 10 * HZ);
 
 	spin_lock(&GlobalMid_Lock);
 	if (midQ->resp_buf) {
@@ -481,11 +532,9 @@
 		}
 		spin_unlock(&GlobalMid_Lock);
 		DeleteMidQEntry(midQ);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
+		/* Update # of requests on wire to server */
+		atomic_dec(&ses->server->inFlight); 
+		wake_up(&ses->server->request_q);
 		return rc;
 	}
   
@@ -536,24 +585,12 @@
 			cFYI(1,("Bad MID state?"));
 		}
 	}
-cifs_no_response_exit2:
+
+out:
+
 	DeleteMidQEntry(midQ);
-
-	if(long_op < 3) {
-		atomic_dec(&ses->server->inFlight); 
-		wake_up(&ses->server->request_q);
-	}
-
-	return rc;
-
-out_unlock2:
-	up(&ses->server->tcpSem);
-	cifs_small_buf_release(in_buf);
-	/* If not lock req, update # of requests on wire to server */
-	if(long_op < 3) {
-		atomic_dec(&ses->server->inFlight); 
-		wake_up(&ses->server->request_q);
-	}
+	atomic_dec(&ses->server->inFlight); 
+	wake_up(&ses->server->request_q);
 
 	return rc;
 }
@@ -583,85 +620,34 @@
 	/* Ensure that we do not send more than 50 overlapping requests 
 	   to the same server. We may make this configurable later or
 	   use ses->maxReq */
-	if(long_op == -1) {
-		/* oplock breaks must not be held up */
-		atomic_inc(&ses->server->inFlight);
-	} else {
-		spin_lock(&GlobalMid_Lock); 
-		while(1) {        
-			if(atomic_read(&ses->server->inFlight) >= 
-					cifs_max_pending){
-				spin_unlock(&GlobalMid_Lock);
-#ifdef CONFIG_CIFS_STATS2
-				atomic_inc(&ses->server->num_waiters);
-#endif
-				wait_event(ses->server->request_q,
-					atomic_read(&ses->server->inFlight)
-					 < cifs_max_pending);
-#ifdef CONFIG_CIFS_STATS2
-				atomic_dec(&ses->server->num_waiters);
-#endif
-				spin_lock(&GlobalMid_Lock);
-			} else {
-				if(ses->server->tcpStatus == CifsExiting) {
-					spin_unlock(&GlobalMid_Lock);
-					return -ENOENT;
-				}
 
-			/* can not count locking commands against total since
-			   they are allowed to block on server */
-					
-				if(long_op < 3) {
-				/* update # of requests on the wire to server */
-					atomic_inc(&ses->server->inFlight);
-				}
-				spin_unlock(&GlobalMid_Lock);
-				break;
-			}
-		}
-	}
+	rc = wait_for_free_request(ses, long_op);
+	if (rc)
+		return rc;
+
 	/* make sure that we sign in the same order that we send on this socket 
 	   and avoid races inside tcp sendmsg code that could cause corruption
 	   of smb data */
 
 	down(&ses->server->tcpSem); 
 
-	if (ses->server->tcpStatus == CifsExiting) {
-		rc = -ENOENT;
-		goto out_unlock;
-	} else if (ses->server->tcpStatus == CifsNeedReconnect) {
-		cFYI(1,("tcp session dead - return to caller to retry"));
-		rc = -EAGAIN;
-		goto out_unlock;
-	} else if (ses->status != CifsGood) {
-		/* check if SMB session is bad because we are setting it up */
-		if((in_buf->Command != SMB_COM_SESSION_SETUP_ANDX) && 
-			(in_buf->Command != SMB_COM_NEGOTIATE)) {
-			rc = -EAGAIN;
-			goto out_unlock;
-		} /* else ok - we are setting up session */
-	}
-	midQ = AllocMidQEntry(in_buf, ses);
-	if (midQ == NULL) {
+	rc = allocate_mid(ses, in_buf, &midQ);
+	if (rc) {
 		up(&ses->server->tcpSem);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
-		return -ENOMEM;
+		/* Update # of requests on wire to server */
+		atomic_dec(&ses->server->inFlight); 
+		wake_up(&ses->server->request_q);
+		return rc;
 	}
 
 	if (in_buf->smb_buf_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
-		up(&ses->server->tcpSem);
 		cERROR(1, ("Illegal length, greater than maximum frame, %d",
 			in_buf->smb_buf_length));
 		DeleteMidQEntry(midQ);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
+		up(&ses->server->tcpSem);
+		/* Update # of requests on wire to server */
+		atomic_dec(&ses->server->inFlight); 
+		wake_up(&ses->server->request_q);
 		return -EIO;
 	}
 
@@ -677,27 +663,19 @@
 	atomic_dec(&ses->server->inSend);
 	midQ->when_sent = jiffies;
 #endif
-	if(rc < 0) {
-		DeleteMidQEntry(midQ);
-		up(&ses->server->tcpSem);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
-		return rc;
-	} else
-		up(&ses->server->tcpSem);
+	up(&ses->server->tcpSem);
+
+	if(rc < 0)
+		goto out;
+
 	if (long_op == -1)
-		goto cifs_no_response_exit;
+		goto out;
 	else if (long_op == 2) /* writes past end of file can take loong time */
 		timeout = 180 * HZ;
 	else if (long_op == 1)
 		timeout = 45 * HZ; /* should be greater than 
 			servers oplock break timeout (about 43 seconds) */
-	else if (long_op > 2) {
-		timeout = MAX_SCHEDULE_TIMEOUT;
-	} else
+	else
 		timeout = 15 * HZ;
 	/* wait for 15 seconds or until woken up due to response arriving or 
 	   due to last connection to this server being unmounted */
@@ -708,19 +686,7 @@
 	}   
 
 	/* No user interrupts in wait - wreaks havoc with performance */
-	if(timeout != MAX_SCHEDULE_TIMEOUT) {
-		timeout += jiffies;
-		wait_event(ses->server->response_q,
-			(!(midQ->midState & MID_REQUEST_SUBMITTED)) || 
-			time_after(jiffies, timeout) || 
-			((ses->server->tcpStatus != CifsGood) &&
-			 (ses->server->tcpStatus != CifsNew)));
-	} else {
-		wait_event(ses->server->response_q,
-			(!(midQ->midState & MID_REQUEST_SUBMITTED)) || 
-			((ses->server->tcpStatus != CifsGood) &&
-			 (ses->server->tcpStatus != CifsNew)));
-	}
+	wait_for_response(ses, midQ, timeout, 10 * HZ);
 
 	spin_lock(&GlobalMid_Lock);
 	if (midQ->resp_buf) {
@@ -748,11 +714,9 @@
 		}
 		spin_unlock(&GlobalMid_Lock);
 		DeleteMidQEntry(midQ);
-		/* If not lock req, update # of requests on wire to server */
-		if(long_op < 3) {
-			atomic_dec(&ses->server->inFlight); 
-			wake_up(&ses->server->request_q);
-		}
+		/* Update # of requests on wire to server */
+		atomic_dec(&ses->server->inFlight); 
+		wake_up(&ses->server->request_q);
 		return rc;
 	}
   
@@ -799,23 +763,253 @@
 			cERROR(1,("Bad MID state?"));
 		}
 	}
-cifs_no_response_exit:
-	DeleteMidQEntry(midQ);
 
-	if(long_op < 3) {
-		atomic_dec(&ses->server->inFlight); 
-		wake_up(&ses->server->request_q);
-	}
+out:
+
+	DeleteMidQEntry(midQ);
+	atomic_dec(&ses->server->inFlight); 
+	wake_up(&ses->server->request_q);
 
 	return rc;
+}
 
-out_unlock:
+/* Send an NT_CANCEL SMB to cause the POSIX blocking lock to return. */
+
+static int
+send_nt_cancel(struct cifsTconInfo *tcon, struct smb_hdr *in_buf,
+		struct mid_q_entry *midQ)
+{
+	int rc = 0;
+	struct cifsSesInfo *ses = tcon->ses;
+	__u16 mid = in_buf->Mid;
+
+	header_assemble(in_buf, SMB_COM_NT_CANCEL, tcon, 0);
+	in_buf->Mid = mid;
+	down(&ses->server->tcpSem); 
+	rc = cifs_sign_smb(in_buf, ses->server, &midQ->sequence_number);
+	if (rc) {
+		up(&ses->server->tcpSem);
+		return rc;
+	}
+	rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
+	      (struct sockaddr *) &(ses->server->addr.sockAddr));
 	up(&ses->server->tcpSem);
-	/* If not lock req, update # of requests on wire to server */
-	if(long_op < 3) {
-		atomic_dec(&ses->server->inFlight); 
-		wake_up(&ses->server->request_q);
+	return rc;
+}
+
+/* We send a LOCKINGX_CANCEL_LOCK to cause the Windows
+   blocking lock to return. */
+
+static int
+send_lock_cancel(const unsigned int xid, struct cifsTconInfo *tcon,
+			struct smb_hdr *in_buf,
+			struct smb_hdr *out_buf)
+{
+	int bytes_returned;
+	struct cifsSesInfo *ses = tcon->ses;
+	LOCK_REQ *pSMB = (LOCK_REQ *)in_buf;
+
+	/* We just modify the current in_buf to change
+	   the type of lock from LOCKING_ANDX_SHARED_LOCK
+	   or LOCKING_ANDX_EXCLUSIVE_LOCK to
+	   LOCKING_ANDX_CANCEL_LOCK. */
+
+	pSMB->LockType = LOCKING_ANDX_CANCEL_LOCK|LOCKING_ANDX_LARGE_FILES;
+	pSMB->Timeout = 0;
+	pSMB->hdr.Mid = GetNextMid(ses->server);
+
+	return SendReceive(xid, ses, in_buf, out_buf,
+			&bytes_returned, 0);
+}
+
+int
+SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
+	    struct smb_hdr *in_buf, struct smb_hdr *out_buf,
+	    int *pbytes_returned)
+{
+	int rc = 0;
+	int rstart = 0;
+	unsigned int receive_len;
+	struct mid_q_entry *midQ;
+	struct cifsSesInfo *ses;
+
+	if (tcon == NULL || tcon->ses == NULL) {
+		cERROR(1,("Null smb session"));
+		return -EIO;
+	}
+	ses = tcon->ses;
+
+	if(ses->server == NULL) {
+		cERROR(1,("Null tcp session"));
+		return -EIO;
 	}
 
+	if(ses->server->tcpStatus == CifsExiting)
+		return -ENOENT;
+
+	/* Ensure that we do not send more than 50 overlapping requests 
+	   to the same server. We may make this configurable later or
+	   use ses->maxReq */
+
+	rc = wait_for_free_request(ses, 3);
+	if (rc)
+		return rc;
+
+	/* make sure that we sign in the same order that we send on this socket 
+	   and avoid races inside tcp sendmsg code that could cause corruption
+	   of smb data */
+
+	down(&ses->server->tcpSem); 
+
+	rc = allocate_mid(ses, in_buf, &midQ);
+	if (rc) {
+		up(&ses->server->tcpSem);
+		return rc;
+	}
+
+	if (in_buf->smb_buf_length > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) {
+		up(&ses->server->tcpSem);
+		cERROR(1, ("Illegal length, greater than maximum frame, %d",
+			in_buf->smb_buf_length));
+		DeleteMidQEntry(midQ);
+		return -EIO;
+	}
+
+	rc = cifs_sign_smb(in_buf, ses->server, &midQ->sequence_number);
+
+	midQ->midState = MID_REQUEST_SUBMITTED;
+#ifdef CONFIG_CIFS_STATS2
+	atomic_inc(&ses->server->inSend);
+#endif
+	rc = smb_send(ses->server->ssocket, in_buf, in_buf->smb_buf_length,
+		      (struct sockaddr *) &(ses->server->addr.sockAddr));
+#ifdef CONFIG_CIFS_STATS2
+	atomic_dec(&ses->server->inSend);
+	midQ->when_sent = jiffies;
+#endif
+	up(&ses->server->tcpSem);
+
+	if(rc < 0) {
+		DeleteMidQEntry(midQ);
+		return rc;
+	}
+
+	/* Wait for a reply - allow signals to interrupt. */
+	rc = wait_event_interruptible(ses->server->response_q,
+		(!(midQ->midState == MID_REQUEST_SUBMITTED)) || 
+		((ses->server->tcpStatus != CifsGood) &&
+		 (ses->server->tcpStatus != CifsNew)));
+
+	/* Were we interrupted by a signal ? */
+	if ((rc == -ERESTARTSYS) &&
+		(midQ->midState == MID_REQUEST_SUBMITTED) &&
+		((ses->server->tcpStatus == CifsGood) ||
+		 (ses->server->tcpStatus == CifsNew))) {
+
+		if (in_buf->Command == SMB_COM_TRANSACTION2) {
+			/* POSIX lock. We send a NT_CANCEL SMB to cause the
+			   blocking lock to return. */
+
+			rc = send_nt_cancel(tcon, in_buf, midQ);
+			if (rc) {
+				DeleteMidQEntry(midQ);
+				return rc;
+			}
+		} else {
+			/* Windows lock. We send a LOCKINGX_CANCEL_LOCK
+			   to cause the blocking lock to return. */
+
+			rc = send_lock_cancel(xid, tcon, in_buf, out_buf);
+
+			/* If we get -ENOLCK back the lock may have
+			   already been removed. Don't exit in this case. */
+			if (rc && rc != -ENOLCK) {
+				DeleteMidQEntry(midQ);
+				return rc;
+			}
+		}
+
+		/* Wait 5 seconds for the response. */
+		if (wait_for_response(ses, midQ, 5 * HZ, 5 * HZ)==0) {
+			/* We got the response - restart system call. */
+			rstart = 1;
+		}
+	}
+
+	spin_lock(&GlobalMid_Lock);
+	if (midQ->resp_buf) {
+		spin_unlock(&GlobalMid_Lock);
+		receive_len = midQ->resp_buf->smb_buf_length;
+	} else {
+		cERROR(1,("No response for cmd %d mid %d",
+			  midQ->command, midQ->mid));
+		if(midQ->midState == MID_REQUEST_SUBMITTED) {
+			if(ses->server->tcpStatus == CifsExiting)
+				rc = -EHOSTDOWN;
+			else {
+				ses->server->tcpStatus = CifsNeedReconnect;
+				midQ->midState = MID_RETRY_NEEDED;
+			}
+		}
+
+		if (rc != -EHOSTDOWN) {
+			if(midQ->midState == MID_RETRY_NEEDED) {
+				rc = -EAGAIN;
+				cFYI(1,("marking request for retry"));
+			} else {
+				rc = -EIO;
+			}
+		}
+		spin_unlock(&GlobalMid_Lock);
+		DeleteMidQEntry(midQ);
+		return rc;
+	}
+  
+	if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) {
+		cERROR(1, ("Frame too large received.  Length: %d  Xid: %d",
+			receive_len, xid));
+		rc = -EIO;
+	} else {		/* rcvd frame is ok */
+
+		if (midQ->resp_buf && out_buf
+		    && (midQ->midState == MID_RESPONSE_RECEIVED)) {
+			out_buf->smb_buf_length = receive_len;
+			memcpy((char *)out_buf + 4,
+			       (char *)midQ->resp_buf + 4,
+			       receive_len);
+
+			dump_smb(out_buf, 92);
+			/* convert the length into a more usable form */
+			if((receive_len > 24) &&
+			   (ses->server->secMode & (SECMODE_SIGN_REQUIRED |
+					SECMODE_SIGN_ENABLED))) {
+				rc = cifs_verify_signature(out_buf,
+						ses->server->mac_signing_key,
+						midQ->sequence_number+1);
+				if(rc) {
+					cERROR(1,("Unexpected SMB signature"));
+					/* BB FIXME add code to kill session */
+				}
+			}
+
+			*pbytes_returned = out_buf->smb_buf_length;
+
+			/* BB special case reconnect tid and uid here? */
+			rc = map_smb_to_linux_error(out_buf);
+
+			/* convert ByteCount if necessary */
+			if (receive_len >=
+			    sizeof (struct smb_hdr) -
+			    4 /* do not count RFC1001 header */  +
+			    (2 * out_buf->WordCount) + 2 /* bcc */ )
+				BCC(out_buf) = le16_to_cpu(BCC_LE(out_buf));
+		} else {
+			rc = -EIO;
+			cERROR(1,("Bad MID state?"));
+		}
+	}
+	DeleteMidQEntry(midQ);
+	if (rstart && rc == -EACCES)
+		return -ERESTARTSYS;
 	return rc;
 }
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index 7754d64..067648b 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -330,11 +330,15 @@
 	sb = direntry->d_inode->i_sb;
 	if(sb == NULL)
 		return -EIO;
-	xid = GetXid();
 
 	cifs_sb = CIFS_SB(sb);
 	pTcon = cifs_sb->tcon;
 
+	if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+		return -EOPNOTSUPP;
+
+	xid = GetXid();
+
 	full_path = build_path_from_dentry(direntry);
 	if(full_path == NULL) {
 		FreeXid(xid);
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index de2e4cb..f5169a9 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -727,7 +727,7 @@
 
 out:
 	if (unlikely(frozen_buffer))	/* It's usually NULL */
-		kfree(frozen_buffer);
+		jbd_slab_free(frozen_buffer, bh->b_size);
 
 	JBUFFER_TRACE(jh, "exit");
 	return error;
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 3a61375..bf46fae 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -4993,7 +4993,7 @@
 				bma.firstblock = *firstblock;
 				bma.alen = alen;
 				bma.off = aoff;
-				bma.conv = (flags & XFS_BMAPI_CONVERT);
+				bma.conv = !!(flags & XFS_BMAPI_CONVERT);
 				bma.wasdel = wasdelay;
 				bma.minlen = minlen;
 				bma.low = flist->xbf_low;
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index 7463fd5..3661e46 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -1,18 +1,13 @@
-/* linux/include/asm-arm/arch-bast/dma.h
+/* linux/include/asm-arm/arch-s3c2410/dma.h
  *
- * Copyright (C) 2003,2004 Simtec Electronics
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410X DMA support
+ * Samsung S3C241XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  ??-May-2003 BJD   Created file
- *  ??-Jun-2003 BJD   Added more dma functionality to go with arch
- *  10-Nov-2004 BJD   Added sys_device support
 */
 
 #ifndef __ASM_ARCH_DMA_H
@@ -21,28 +16,26 @@
 #include <linux/sysdev.h>
 #include "hardware.h"
 
-
 /*
  * This is the maximum DMA address(physical address) that can be DMAd to.
  *
  */
-#define MAX_DMA_ADDRESS		0x20000000
+#define MAX_DMA_ADDRESS		0x40000000
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
-
 /* we have 4 dma channels */
 #define S3C2410_DMA_CHANNELS        (4)
 
 /* types */
 
-typedef enum {
+enum s3c2410_dma_state {
 	S3C2410_DMA_IDLE,
 	S3C2410_DMA_RUNNING,
 	S3C2410_DMA_PAUSED
-} s3c2410_dma_state_t;
+};
 
 
-/* s3c2410_dma_loadst_t
+/* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
  * transfers. Since we don't have any way of knowing exactly the state of
@@ -70,45 +63,40 @@
  * currently running.
 */
 
-typedef enum {
+enum s3c2410_dma_loadst {
 	S3C2410_DMALOAD_NONE,
 	S3C2410_DMALOAD_1LOADED,
 	S3C2410_DMALOAD_1RUNNING,
 	S3C2410_DMALOAD_1LOADED_1RUNNING,
-} s3c2410_dma_loadst_t;
+};
 
-typedef enum {
+enum s3c2410_dma_buffresult {
 	S3C2410_RES_OK,
 	S3C2410_RES_ERR,
 	S3C2410_RES_ABORT
-} s3c2410_dma_buffresult_t;
-
-
-typedef enum s3c2410_dmasrc_e s3c2410_dmasrc_t;
-
-enum s3c2410_dmasrc_e {
-	S3C2410_DMASRC_HW,      /* source is memory */
-	S3C2410_DMASRC_MEM      /* source is hardware */
 };
 
-/* enum s3c2410_chan_op_e
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
  *
  * operation codes passed to the DMA code by the user, and also used
  * to inform the current channel owner of any changes to the system state
 */
 
-enum s3c2410_chan_op_e {
+enum s3c2410_chan_op {
 	S3C2410_DMAOP_START,
 	S3C2410_DMAOP_STOP,
 	S3C2410_DMAOP_PAUSE,
 	S3C2410_DMAOP_RESUME,
 	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,           /* internal signal to handler */
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
 	S3C2410_DMAOP_STARTED,		/* indicate channel started */
 };
 
-typedef enum s3c2410_chan_op_e s3c2410_chan_op_t;
-
 /* flags */
 
 #define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
@@ -117,104 +105,100 @@
 
 /* dma buffer */
 
-typedef struct s3c2410_dma_buf_s s3c2410_dma_buf_t;
-
 struct s3c2410_dma_client {
 	char                *name;
 };
 
-typedef struct s3c2410_dma_client s3c2410_dma_client_t;
-
 /* s3c2410_dma_buf_s
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf_s {
-	s3c2410_dma_buf_t   *next;
-	int                  magic;        /* magic */
-	int                  size;         /* buffer size in bytes */
-	dma_addr_t           data;         /* start of DMA data */
-	dma_addr_t           ptr;          /* where the DMA got to [1] */
-	void                *id;           /* client's id */
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+	struct s3c2410_dma_buf	*next;
+	int			 magic;		/* magic */
+	int			 size;		/* buffer size in bytes */
+	dma_addr_t		 data;		/* start of DMA data */
+	dma_addr_t		 ptr;		/* where the DMA got to [1] */
+	void			*id;		/* client's id */
 };
 
 /* [1] is this updated for both recv/send modes? */
 
-typedef struct s3c2410_dma_chan_s s3c2410_dma_chan_t;
+struct s3c2410_dma_chan;
 
 /* s3c2410_dma_cbfn_t
  *
  * buffer callback routine type
 */
 
-typedef void (*s3c2410_dma_cbfn_t)(s3c2410_dma_chan_t *, void *buf, int size,
-				   s3c2410_dma_buffresult_t result);
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
 
-typedef int  (*s3c2410_dma_opfn_t)(s3c2410_dma_chan_t *,
-				   s3c2410_chan_op_t );
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
 
-struct s3c2410_dma_stats_s {
-	unsigned long          loads;
-	unsigned long          timeout_longest;
-	unsigned long          timeout_shortest;
-	unsigned long          timeout_avg;
-	unsigned long          timeout_failed;
+struct s3c2410_dma_stats {
+	unsigned long		loads;
+	unsigned long		timeout_longest;
+	unsigned long		timeout_shortest;
+	unsigned long		timeout_avg;
+	unsigned long		timeout_failed;
 };
 
-typedef struct s3c2410_dma_stats_s s3c2410_dma_stats_t;
-
-/* struct s3c2410_dma_chan_s
+/* struct s3c2410_dma_chan
  *
  * full state information for each DMA channel
 */
 
-struct s3c2410_dma_chan_s {
+struct s3c2410_dma_chan {
 	/* channel state flags and information */
-	unsigned char          number;      /* number of this dma channel */
-	unsigned char          in_use;      /* channel allocated */
-	unsigned char          irq_claimed; /* irq claimed for channel */
-	unsigned char          irq_enabled; /* irq enabled for channel */
-	unsigned char          xfer_unit;   /* size of an transfer */
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 irq_claimed; /* irq claimed for channel */
+	unsigned char		 irq_enabled; /* irq enabled for channel */
+	unsigned char		 xfer_unit;   /* size of an transfer */
 
 	/* channel state */
 
-	s3c2410_dma_state_t    state;
-	s3c2410_dma_loadst_t   load_state;
-	s3c2410_dma_client_t  *client;
+	enum s3c2410_dma_state	 state;
+	enum s3c2410_dma_loadst	 load_state;
+	struct s3c2410_dma_client *client;
 
 	/* channel configuration */
-	s3c2410_dmasrc_t       source;
-	unsigned long          dev_addr;
-	unsigned long          load_timeout;
-	unsigned int           flags;        /* channel flags */
+	enum s3c2410_dmasrc	 source;
+	unsigned long		 dev_addr;
+	unsigned long		 load_timeout;
+	unsigned int		 flags;		/* channel flags */
 
 	/* channel's hardware position and configuration */
-	void __iomem           *regs;        /* channels registers */
-	void __iomem           *addr_reg;    /* data address register */
-	unsigned int           irq;          /* channel irq */
-	unsigned long          dcon;         /* default value of DCON */
+	void __iomem		*regs;		/* channels registers */
+	void __iomem		*addr_reg;	/* data address register */
+	unsigned int		 irq;		/* channel irq */
+	unsigned long		 dcon;		/* default value of DCON */
 
 	/* driver handles */
-	s3c2410_dma_cbfn_t     callback_fn;  /* buffer done callback */
-	s3c2410_dma_opfn_t     op_fn;        /* channel operation callback */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
 
 	/* stats gathering */
-	s3c2410_dma_stats_t   *stats;
-	s3c2410_dma_stats_t    stats_store;
+	struct s3c2410_dma_stats *stats;
+	struct s3c2410_dma_stats  stats_store;
 
 	/* buffer list and information */
-	s3c2410_dma_buf_t      *curr;        /* current dma buffer */
-	s3c2410_dma_buf_t      *next;        /* next buffer to load */
-	s3c2410_dma_buf_t      *end;         /* end of queue */
+	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
+	struct s3c2410_dma_buf	*next;		/* next buffer to load */
+	struct s3c2410_dma_buf	*end;		/* end of queue */
 
 	/* system device */
 	struct sys_device	dev;
 };
 
 /* the currently allocated channel information */
-extern s3c2410_dma_chan_t s3c2410_chans[];
+extern struct s3c2410_dma_chan s3c2410_chans[];
 
 /* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
@@ -227,7 +211,7 @@
 */
 
 extern int s3c2410_dma_request(dmach_t channel,
-			       s3c2410_dma_client_t *, void *dev);
+			       struct s3c2410_dma_client *, void *dev);
 
 
 /* s3c2410_dma_ctrl
@@ -235,7 +219,7 @@
  * change the state of the dma channel
 */
 
-extern int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op);
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
 
 /* s3c2410_dma_setflags
  *
@@ -250,7 +234,7 @@
  * free the dma channel (will also abort any outstanding operations)
 */
 
-extern int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *);
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
 
 /* s3c2410_dma_enqueue
  *
@@ -274,7 +258,7 @@
  * configure the device we're talking to
 */
 
-extern int s3c2410_dma_devconfig(int channel, s3c2410_dmasrc_t source,
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
 				 int hwcfg, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index fe0c744..e4a2569 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -247,14 +247,12 @@
  */
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
 	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
 		memcpy(dst, src, len);				\
-		flush_dcache_page(page);			\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
 	} while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
 		memcpy(dst, src, len);				\
 	} while (0)
 
@@ -285,10 +283,24 @@
 		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 	}
 }
+
+static inline void
+flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr,
+			 unsigned long len, int write)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = (unsigned long)kaddr;
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
 #endif
 
 /*
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 406ca97..e2f1d75 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -199,7 +199,21 @@
 	: "cc");
 }
 
-#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp tmp2 = 1;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	adds	%0, %0, #1\n"
+"	strexpl	%1, %0, [%2]\n"
+	: "=&r" (tmp), "+r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+
+	smp_mb();
+	return tmp2 == 0;
+}
 
 /* read_can_lock - would read_trylock() succeed? */
 #define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
diff --git a/include/asm-i386/alternative.h b/include/asm-i386/alternative.h
index 96adbab..b01a7ec 100644
--- a/include/asm-i386/alternative.h
+++ b/include/asm-i386/alternative.h
@@ -88,9 +88,6 @@
 /*
  * Alternative inline assembly for SMP.
  *
- * alternative_smp() takes two versions (SMP first, UP second) and is
- * for more complex stuff such as spinlocks.
- *
  * The LOCK_PREFIX macro defined here replaces the LOCK and
  * LOCK_PREFIX macros used everywhere in the source tree.
  *
@@ -110,21 +107,6 @@
  */
 
 #ifdef CONFIG_SMP
-#define alternative_smp(smpinstr, upinstr, args...)			\
-	asm volatile ("661:\n\t" smpinstr "\n662:\n" 			\
-		      ".section .smp_altinstructions,\"a\"\n"		\
-		      "  .align 4\n"					\
-		      "  .long 661b\n"            /* label */		\
-		      "  .long 663f\n"		  /* new instruction */	\
-		      "  .byte 0x68\n"            /* X86_FEATURE_UP */	\
-		      "  .byte 662b-661b\n"       /* sourcelen */	\
-		      "  .byte 664f-663f\n"       /* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .smp_altinstr_replacement,\"awx\"\n"   	\
-		      "663:\n\t" upinstr "\n"     /* replacement */	\
-		      "664:\n\t.fill 662b-661b,1,0x42\n" /* space for original */ \
-		      ".previous" : args)
-
 #define LOCK_PREFIX \
 		".section .smp_locks,\"a\"\n"	\
 		"  .align 4\n"			\
@@ -133,8 +115,6 @@
 	       	"661:\n\tlock; "
 
 #else /* ! CONFIG_SMP */
-#define alternative_smp(smpinstr, upinstr, args...) \
-	asm volatile (upinstr : args)
 #define LOCK_PREFIX ""
 #endif
 
diff --git a/include/asm-i386/mach-default/mach_mpspec.h b/include/asm-i386/mach-default/mach_mpspec.h
index 6b5dadc..51c9a97 100644
--- a/include/asm-i386/mach-default/mach_mpspec.h
+++ b/include/asm-i386/mach-default/mach_mpspec.h
@@ -3,6 +3,10 @@
 
 #define MAX_IRQ_SOURCES 256
 
+#if CONFIG_BASE_SMALL == 0
+#define MAX_MP_BUSSES 256
+#else
 #define MAX_MP_BUSSES 32
+#endif
 
 #endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/rwlock.h b/include/asm-i386/rwlock.h
index 96b0bef..87c069c 100644
--- a/include/asm-i386/rwlock.h
+++ b/include/asm-i386/rwlock.h
@@ -21,23 +21,21 @@
 #define RW_LOCK_BIAS_STR	"0x01000000"
 
 #define __build_read_lock_ptr(rw, helper)   \
-	alternative_smp("lock; subl $1,(%0)\n\t" \
+	asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t" \
 			"jns 1f\n" \
 			"call " helper "\n\t" \
-			"1:\n", \
-			"subl $1,(%0)\n\t", \
-			:"a" (rw) : "memory")
+			"1:\n" \
+			::"a" (rw) : "memory")
 
 #define __build_read_lock_const(rw, helper)   \
-	alternative_smp("lock; subl $1,%0\n\t" \
+	asm volatile(LOCK_PREFIX " subl $1,%0\n\t" \
 			"jns 1f\n" \
 			"pushl %%eax\n\t" \
 			"leal %0,%%eax\n\t" \
 			"call " helper "\n\t" \
 			"popl %%eax\n\t" \
-			"1:\n", \
-			"subl $1,%0\n\t", \
-			"+m" (*(volatile int *)rw) : : "memory")
+			"1:\n" \
+			:"+m" (*(volatile int *)rw) : : "memory")
 
 #define __build_read_lock(rw, helper)	do { \
 						if (__builtin_constant_p(rw)) \
@@ -47,23 +45,21 @@
 					} while (0)
 
 #define __build_write_lock_ptr(rw, helper) \
-	alternative_smp("lock; subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
+	asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
 			"jz 1f\n" \
 			"call " helper "\n\t" \
-			"1:\n", \
-			"subl $" RW_LOCK_BIAS_STR ",(%0)\n\t", \
-			:"a" (rw) : "memory")
+			"1:\n" \
+			::"a" (rw) : "memory")
 
 #define __build_write_lock_const(rw, helper) \
-	alternative_smp("lock; subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
+	asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
 			"jz 1f\n" \
 			"pushl %%eax\n\t" \
 			"leal %0,%%eax\n\t" \
 			"call " helper "\n\t" \
 			"popl %%eax\n\t" \
-			"1:\n", \
-			"subl $" RW_LOCK_BIAS_STR ",%0\n\t", \
-			"+m" (*(volatile int *)rw) : : "memory")
+			"1:\n" \
+			:"+m" (*(volatile int *)rw) : : "memory")
 
 #define __build_write_lock(rw, helper)	do { \
 						if (__builtin_constant_p(rw)) \
diff --git a/include/asm-i386/spinlock.h b/include/asm-i386/spinlock.h
index d816c62..d102036 100644
--- a/include/asm-i386/spinlock.h
+++ b/include/asm-i386/spinlock.h
@@ -22,7 +22,7 @@
 
 #define __raw_spin_lock_string \
 	"\n1:\t" \
-	"lock ; decb %0\n\t" \
+	LOCK_PREFIX " ; decb %0\n\t" \
 	"jns 3f\n" \
 	"2:\t" \
 	"rep;nop\n\t" \
@@ -38,7 +38,7 @@
  */
 #define __raw_spin_lock_string_flags \
 	"\n1:\t" \
-	"lock ; decb %0\n\t" \
+	LOCK_PREFIX " ; decb %0\n\t" \
 	"jns 5f\n" \
 	"2:\t" \
 	"testl $0x200, %1\n\t" \
@@ -57,15 +57,9 @@
 	"jmp 4b\n" \
 	"5:\n\t"
 
-#define __raw_spin_lock_string_up \
-	"\n\tdecb %0"
-
 static inline void __raw_spin_lock(raw_spinlock_t *lock)
 {
-	alternative_smp(
-		__raw_spin_lock_string,
-		__raw_spin_lock_string_up,
-		"+m" (lock->slock) : : "memory");
+	asm(__raw_spin_lock_string : "+m" (lock->slock) : : "memory");
 }
 
 /*
@@ -76,10 +70,7 @@
 #ifndef CONFIG_PROVE_LOCKING
 static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
 {
-	alternative_smp(
-		__raw_spin_lock_string_flags,
-		__raw_spin_lock_string_up,
-		"+m" (lock->slock) : "r" (flags) : "memory");
+	asm(__raw_spin_lock_string_flags : "+m" (lock->slock) : "r" (flags) : "memory");
 }
 #endif
 
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index fc1c8dd..d983b74 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -324,8 +324,6 @@
 #define __NR_vmsplice		316
 #define __NR_move_pages		317
 
-#ifdef __KERNEL__
-
 #define NR_syscalls 318
 
 /*
@@ -425,6 +423,8 @@
 __syscall_return(type,__res); \
 }
 
+#ifdef __KERNEL__
+
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
diff --git a/include/asm-i386/unwind.h b/include/asm-i386/unwind.h
index 69f0f1d..4c1a0b9 100644
--- a/include/asm-i386/unwind.h
+++ b/include/asm-i386/unwind.h
@@ -87,6 +87,7 @@
 #else
 
 #define UNW_PC(frame) ((void)(frame), 0)
+#define UNW_SP(frame) ((void)(frame), 0)
 
 static inline int arch_unw_user_mode(const void *info)
 {
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index bd4452b..ba826b3 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -706,12 +706,9 @@
 sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
 {
 	struct ia64_sal_retval ret_stuff;
-	unsigned long irq_flags;
 
-	local_irq_save(irq_flags);
 	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
 				(u64)nasid_array, perms, 0, 0, 0);
-	local_irq_restore(irq_flags);
 	return ret_stuff.status;
 }
 #define SN_MEMPROT_ACCESS_CLASS_0		0x14a080
@@ -1143,12 +1140,9 @@
 sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
 {
 	struct ia64_sal_retval ret_stuff;
-	unsigned long irq_flags;
 
-	local_irq_save(irq_flags);
 	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
 				(u64)ecc, 0, 0, 0, 0);
-	local_irq_restore(irq_flags);
 	return ret_stuff.status;
 }
 
diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h
index 9bd2f9b..6f807e0 100644
--- a/include/asm-ia64/sn/xp.h
+++ b/include/asm-ia64/sn/xp.h
@@ -60,23 +60,37 @@
  * the bte_copy() once in the hope that the failure was due to a temporary
  * aberration (i.e., the link going down temporarily).
  *
- * See bte_copy for definition of the input parameters.
+ * 	src - physical address of the source of the transfer.
+ *	vdst - virtual address of the destination of the transfer.
+ *	len - number of bytes to transfer from source to destination.
+ *	mode - see bte_copy() for definition.
+ *	notification - see bte_copy() for definition.
  *
  * Note: xp_bte_copy() should never be called while holding a spinlock.
  */
 static inline bte_result_t
-xp_bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
+xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
 {
 	bte_result_t ret;
+	u64 pdst = ia64_tpa(vdst);
 
 
-	ret = bte_copy(src, dest, len, mode, notification);
+	/*
+	 * Ensure that the physically mapped memory is contiguous.
+	 *
+	 * We do this by ensuring that the memory is from region 7 only.
+	 * If the need should arise to use memory from one of the other
+	 * regions, then modify the BUG_ON() statement to ensure that the
+	 * memory from that region is always physically contiguous.
+	 */
+	BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
 
+	ret = bte_copy(src, pdst, len, mode, notification);
 	if (ret != BTE_SUCCESS) {
 		if (!in_interrupt()) {
 			cond_resched();
 		}
-		ret = bte_copy(src, dest, len, mode, notification);
+		ret = bte_copy(src, pdst, len, mode, notification);
 	}
 
 	return ret;
diff --git a/include/asm-ia64/sn/xpc.h b/include/asm-ia64/sn/xpc.h
index b72af59..35e1386 100644
--- a/include/asm-ia64/sn/xpc.h
+++ b/include/asm-ia64/sn/xpc.h
@@ -683,7 +683,9 @@
 extern struct xpc_rsvd_page *xpc_rsvd_page;
 extern struct xpc_vars_part *xpc_vars_part;
 extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char xpc_remote_copy_buffer[];
+extern char *xpc_remote_copy_buffer;
+extern void *xpc_remote_copy_buffer_base;
+extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
 extern void xpc_allow_IPI_ops(void);
 extern void xpc_restrict_IPI_ops(void);
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index a9496f3..36c4c34 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -72,6 +72,9 @@
  * Neither do the standard versions now, these are just here
  * for older code.
  */
+#define insb(port, buf, ns)	_insb((u8 __iomem *)((port)+pci_io_base), (buf), (ns))
+#define insw(port, buf, ns)	_insw_ns((u8 __iomem *)((port)+pci_io_base), (buf), (ns))
+#define insl(port, buf, nl)	_insl_ns((u8 __iomem *)((port)+pci_io_base), (buf), (nl))
 #define insw_ns(port, buf, ns)	_insw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns))
 #define insl_ns(port, buf, nl)	_insl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl))
 #else
@@ -137,12 +140,12 @@
 #define insw_ns(port, buf, ns)	eeh_insw_ns((port), (buf), (ns))
 #define insl_ns(port, buf, nl)	eeh_insl_ns((port), (buf), (nl))
 
+#endif
+
 #define outsb(port, buf, ns)  _outsb((u8 __iomem *)((port)+pci_io_base), (buf), (ns))
 #define outsw(port, buf, ns)  _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns))
 #define outsl(port, buf, nl)  _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl))
 
-#endif
-
 #define readb_relaxed(addr) readb(addr)
 #define readw_relaxed(addr) readw(addr)
 #define readl_relaxed(addr) readl(addr)
diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h
index 0fe396a..53079ec 100644
--- a/include/asm-powerpc/ipic.h
+++ b/include/asm-powerpc/ipic.h
@@ -69,9 +69,6 @@
 	IPIC_MCP_MU   = 7,
 };
 
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
-		unsigned int irq_offset,
-		unsigned char *senses, unsigned int senses_count);
 extern int ipic_set_priority(unsigned int irq, unsigned int priority);
 extern void ipic_set_highest_priority(unsigned int irq);
 extern void ipic_set_default_priority(void);
@@ -79,7 +76,16 @@
 extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
 extern u32 ipic_get_mcp_status(void);
 extern void ipic_clear_mcp_status(u32 mask);
+
+#ifdef CONFIG_PPC_MERGE
+extern void ipic_init(struct device_node *node, unsigned int flags);
+extern unsigned int ipic_get_irq(struct pt_regs *regs);
+#else
+extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
+		unsigned int irq_offset,
+		unsigned char *senses, unsigned int senses_count);
 extern int ipic_get_irq(struct pt_regs *regs);
+#endif
 
 #endif /* __ASM_IPIC_H__ */
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h
index f260382..b85df45 100644
--- a/include/asm-powerpc/mpc86xx.h
+++ b/include/asm-powerpc/mpc86xx.h
@@ -23,8 +23,6 @@
 #define _ISA_MEM_BASE   isa_mem_base
 #ifdef CONFIG_PCI
 #define PCI_DRAM_OFFSET pci_dram_offset
-#else
-#define PCI_DRAM_OFFSET 0
 #endif
 
 #define CPU0_BOOT_RELEASE 0x01000000
@@ -33,7 +31,6 @@
 #define MCM_PORT_CONFIG_OFFSET 0x1010
 
 /* Offset from CCSRBAR */
-#define MPC86xx_OPENPIC_OFFSET	(0x40000)
 #define MPC86xx_MCM_OFFSET      (0x00000)
 #define MPC86xx_MCM_SIZE        (0x02000)
 
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index eb241c9..a9f9604 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -41,6 +41,7 @@
 #define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0
 #define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0
 #define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0
+#define MPIC_GREG_IPI_STRIDE		0x10
 #define MPIC_GREG_SPURIOUS		0x000e0
 #define MPIC_GREG_TIMER_FREQ		0x000f0
 
@@ -68,6 +69,7 @@
 #define MPIC_CPU_IPI_DISPATCH_1		0x00050
 #define MPIC_CPU_IPI_DISPATCH_2		0x00060
 #define MPIC_CPU_IPI_DISPATCH_3		0x00070
+#define MPIC_CPU_IPI_DISPATCH_STRIDE	0x00010
 #define MPIC_CPU_CURRENT_TASK_PRI	0x00080
 #define 	MPIC_CPU_TASKPRI_MASK			0x0000000f
 #define MPIC_CPU_WHOAMI			0x00090
@@ -114,6 +116,103 @@
 #define MPIC_VEC_TIMER_1	248
 #define MPIC_VEC_TIMER_0	247
 
+/*
+ * Tsi108 implementation of MPIC has many differences from the original one
+ */
+
+/*
+ * Global registers
+ */
+
+#define TSI108_GREG_BASE		0x00000
+#define TSI108_GREG_FEATURE_0		0x00000
+#define TSI108_GREG_GLOBAL_CONF_0	0x00004
+#define TSI108_GREG_VENDOR_ID		0x0000c
+#define TSI108_GREG_IPI_VECTOR_PRI_0	0x00204		/* Doorbell 0 */
+#define TSI108_GREG_IPI_STRIDE		0x0c
+#define TSI108_GREG_SPURIOUS		0x00010
+#define TSI108_GREG_TIMER_FREQ		0x00014
+
+/*
+ * Timer registers
+ */
+#define TSI108_TIMER_BASE		0x0030
+#define TSI108_TIMER_STRIDE		0x10
+#define TSI108_TIMER_CURRENT_CNT	0x00000
+#define TSI108_TIMER_BASE_CNT		0x00004
+#define TSI108_TIMER_VECTOR_PRI		0x00008
+#define TSI108_TIMER_DESTINATION	0x0000c
+
+/*
+ * Per-Processor registers
+ */
+#define TSI108_CPU_BASE			0x00300
+#define TSI108_CPU_STRIDE		0x00040
+#define TSI108_CPU_IPI_DISPATCH_0	0x00200
+#define TSI108_CPU_IPI_DISPATCH_STRIDE	0x00000
+#define TSI108_CPU_CURRENT_TASK_PRI	0x00000
+#define TSI108_CPU_WHOAMI		0xffffffff
+#define TSI108_CPU_INTACK		0x00004
+#define TSI108_CPU_EOI			0x00008
+
+/*
+ * Per-source registers
+ */
+#define TSI108_IRQ_BASE			0x00100
+#define TSI108_IRQ_STRIDE		0x00008
+#define TSI108_IRQ_VECTOR_PRI		0x00000
+#define TSI108_VECPRI_VECTOR_MASK	0x000000ff
+#define TSI108_VECPRI_POLARITY_POSITIVE	0x01000000
+#define TSI108_VECPRI_POLARITY_NEGATIVE	0x00000000
+#define TSI108_VECPRI_SENSE_LEVEL	0x02000000
+#define TSI108_VECPRI_SENSE_EDGE	0x00000000
+#define TSI108_VECPRI_POLARITY_MASK	0x01000000
+#define TSI108_VECPRI_SENSE_MASK	0x02000000
+#define TSI108_IRQ_DESTINATION		0x00004
+
+/* weird mpic register indices and mask bits in the HW info array */
+enum {
+	MPIC_IDX_GREG_BASE = 0,
+	MPIC_IDX_GREG_FEATURE_0,
+	MPIC_IDX_GREG_GLOBAL_CONF_0,
+	MPIC_IDX_GREG_VENDOR_ID,
+	MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
+	MPIC_IDX_GREG_IPI_STRIDE,
+	MPIC_IDX_GREG_SPURIOUS,
+	MPIC_IDX_GREG_TIMER_FREQ,
+
+	MPIC_IDX_TIMER_BASE,
+	MPIC_IDX_TIMER_STRIDE,
+	MPIC_IDX_TIMER_CURRENT_CNT,
+	MPIC_IDX_TIMER_BASE_CNT,
+	MPIC_IDX_TIMER_VECTOR_PRI,
+	MPIC_IDX_TIMER_DESTINATION,
+
+	MPIC_IDX_CPU_BASE,
+	MPIC_IDX_CPU_STRIDE,
+	MPIC_IDX_CPU_IPI_DISPATCH_0,
+	MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
+	MPIC_IDX_CPU_CURRENT_TASK_PRI,
+	MPIC_IDX_CPU_WHOAMI,
+	MPIC_IDX_CPU_INTACK,
+	MPIC_IDX_CPU_EOI,
+
+	MPIC_IDX_IRQ_BASE,
+	MPIC_IDX_IRQ_STRIDE,
+	MPIC_IDX_IRQ_VECTOR_PRI,
+
+	MPIC_IDX_VECPRI_VECTOR_MASK,
+	MPIC_IDX_VECPRI_POLARITY_POSITIVE,
+	MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
+	MPIC_IDX_VECPRI_SENSE_LEVEL,
+	MPIC_IDX_VECPRI_SENSE_EDGE,
+	MPIC_IDX_VECPRI_POLARITY_MASK,
+	MPIC_IDX_VECPRI_SENSE_MASK,
+	MPIC_IDX_IRQ_DESTINATION,
+	MPIC_IDX_END
+};
+
+
 #ifdef CONFIG_MPIC_BROKEN_U3
 /* Fixup table entry */
 struct mpic_irq_fixup
@@ -171,15 +270,29 @@
 	volatile u32 __iomem	*cpuregs[MPIC_MAX_CPUS];
 	volatile u32 __iomem	*isus[MPIC_MAX_ISU];
 
+#ifdef CONFIG_MPIC_WEIRD
+	/* Pointer to HW info array */
+	u32			*hw_set;
+#endif
+
 	/* link */
 	struct mpic		*next;
 };
 
+/*
+ * MPIC flags (passed to mpic_alloc)
+ *
+ * The top 4 bits contain an MPIC bhw id that is used to index the
+ * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
+ * Note setting any ID (leaving those bits to 0) means standard MPIC
+ */
+
 /* This is the primary controller, only that one has IPIs and
  * has afinity control. A non-primary MPIC always uses CPU0
  * registers only
  */
 #define MPIC_PRIMARY			0x00000001
+
 /* Set this for a big-endian MPIC */
 #define MPIC_BIG_ENDIAN			0x00000002
 /* Broken U3 MPIC */
@@ -188,6 +301,18 @@
 #define MPIC_BROKEN_IPI			0x00000008
 /* MPIC wants a reset */
 #define MPIC_WANTS_RESET		0x00000010
+/* Spurious vector requires EOI */
+#define MPIC_SPV_EOI			0x00000020
+/* No passthrough disable */
+#define MPIC_NO_PTHROU_DIS		0x00000040
+
+/* MPIC HW modification ID */
+#define MPIC_REGSET_MASK		0xf0000000
+#define MPIC_REGSET(val)		(((val) & 0xf ) << 28)
+#define MPIC_GET_REGSET(flags)		(((flags) >> 28) & 0xf)
+
+#define	MPIC_REGSET_STANDARD		MPIC_REGSET(0)	/* Original MPIC */
+#define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
 
 /* Allocate the controller structure and setup the linux irq descs
  * for the range if interrupts passed in. No HW initialization is
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index b095a28..d0fa1b9 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -276,6 +276,7 @@
  * of_irq_map_raw - Low level interrupt tree parsing
  * @parent:	the device interrupt parent
  * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @ointsize:   size of the passed in interrupt specifier
  * @addr:	address specifier (start of "reg" property of the device)
  * @out_irq:	structure of_irq filled by this function
  *
@@ -288,7 +289,8 @@
  *
  */
 
-extern int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+extern int of_irq_map_raw(struct device_node *parent, u32 *intspec,
+			  u32 ointsize, u32 *addr,
 			  struct of_irq *out_irq);
 
 
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index dcde441..5785ac4 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -30,10 +30,6 @@
 extern unsigned long tb_ticks_per_sec;
 extern u64 tb_to_xs;
 extern unsigned      tb_to_us;
-extern unsigned long tb_last_stamp;
-extern u64 tb_last_jiffy;
-
-DECLARE_PER_CPU(unsigned long, last_jiffy);
 
 struct rtc_time;
 extern void to_tm(int tim, struct rtc_time * tm);
diff --git a/include/asm-x86_64/alternative.h b/include/asm-x86_64/alternative.h
index aa67bfd..a584826 100644
--- a/include/asm-x86_64/alternative.h
+++ b/include/asm-x86_64/alternative.h
@@ -4,6 +4,7 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
+#include <asm/cpufeature.h>
 
 struct alt_instr {
 	u8 *instr; 		/* original instruction */
@@ -102,9 +103,6 @@
 /*
  * Alternative inline assembly for SMP.
  *
- * alternative_smp() takes two versions (SMP first, UP second) and is
- * for more complex stuff such as spinlocks.
- *
  * The LOCK_PREFIX macro defined here replaces the LOCK and
  * LOCK_PREFIX macros used everywhere in the source tree.
  *
@@ -124,21 +122,6 @@
  */
 
 #ifdef CONFIG_SMP
-#define alternative_smp(smpinstr, upinstr, args...)			\
-	asm volatile ("661:\n\t" smpinstr "\n662:\n"			\
-		      ".section .smp_altinstructions,\"a\"\n"		\
-		      "  .align 8\n"					\
-		      "  .quad 661b\n"            /* label */		\
-		      "  .quad 663f\n"		  /* new instruction */	\
-		      "  .byte 0x66\n"            /* X86_FEATURE_UP */	\
-		      "  .byte 662b-661b\n"       /* sourcelen */	\
-		      "  .byte 664f-663f\n"       /* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .smp_altinstr_replacement,\"awx\"\n"	\
-		      "663:\n\t" upinstr "\n"     /* replacement */	\
-		      "664:\n\t.fill 662b-661b,1,0x42\n" /* space for original */ \
-		      ".previous" : args)
-
 #define LOCK_PREFIX \
 		".section .smp_locks,\"a\"\n"	\
 		"  .align 8\n"			\
@@ -147,8 +130,6 @@
 	       	"661:\n\tlock; "
 
 #else /* ! CONFIG_SMP */
-#define alternative_smp(smpinstr, upinstr, args...) \
-	asm volatile (upinstr : args)
 #define LOCK_PREFIX ""
 #endif
 
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h
index 3b3c121..de9c314 100644
--- a/include/asm-x86_64/processor.h
+++ b/include/asm-x86_64/processor.h
@@ -232,8 +232,14 @@
 	unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
 } __attribute__((packed)) ____cacheline_aligned;
 
+
 extern struct cpuinfo_x86 boot_cpu_data;
 DECLARE_PER_CPU(struct tss_struct,init_tss);
+/* Save the original ist values for checking stack pointers during debugging */
+struct orig_ist {
+	unsigned long ist[7];
+};
+DECLARE_PER_CPU(struct orig_ist, orig_ist);
 
 #ifdef CONFIG_X86_VSMP
 #define ARCH_MIN_TASKALIGN	(1 << INTERNODE_CACHE_SHIFT)
diff --git a/include/asm-x86_64/spinlock.h b/include/asm-x86_64/spinlock.h
index 8d34219..248a79f 100644
--- a/include/asm-x86_64/spinlock.h
+++ b/include/asm-x86_64/spinlock.h
@@ -21,7 +21,7 @@
 
 #define __raw_spin_lock_string \
 	"\n1:\t" \
-	"lock ; decl %0\n\t" \
+	LOCK_PREFIX " ; decl %0\n\t" \
 	"js 2f\n" \
 	LOCK_SECTION_START("") \
 	"2:\t" \
@@ -40,10 +40,7 @@
 
 static inline void __raw_spin_lock(raw_spinlock_t *lock)
 {
-	alternative_smp(
-		__raw_spin_lock_string,
-		__raw_spin_lock_string_up,
-		"=m" (lock->slock) : : "memory");
+	asm volatile(__raw_spin_lock_string : "=m" (lock->slock) : : "memory");
 }
 
 #define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
@@ -125,12 +122,12 @@
 
 static inline void __raw_read_unlock(raw_rwlock_t *rw)
 {
-	asm volatile("lock ; incl %0" :"=m" (rw->lock) : : "memory");
+	asm volatile(LOCK_PREFIX " ; incl %0" :"=m" (rw->lock) : : "memory");
 }
 
 static inline void __raw_write_unlock(raw_rwlock_t *rw)
 {
-	asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ",%0"
+	asm volatile(LOCK_PREFIX " ; addl $" RW_LOCK_BIAS_STR ",%0"
 				: "=m" (rw->lock) : : "memory");
 }
 
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index 94387c9..2d89d30 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -620,8 +620,6 @@
 #define __NR_move_pages		279
 __SYSCALL(__NR_move_pages, sys_move_pages)
 
-#ifdef __KERNEL__
-
 #define __NR_syscall_max __NR_move_pages
 
 #ifndef __NO_STUBS
@@ -746,6 +744,8 @@
 
 #else /* __KERNEL_SYSCALLS__ */
 
+#ifdef __KERNEL__
+
 #include <linux/syscalls.h>
 #include <asm/ptrace.h>
 
@@ -838,9 +838,9 @@
 				struct sigaction __user *oact,
 				size_t sigsetsize);
 
-#endif	/* __ASSEMBLY__ */
+#endif
 
-#endif /* __NO_STUBS */
+#endif
 
 /*
  * "Conditional" syscalls
@@ -850,5 +850,6 @@
  */
 #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
 
-#endif /* __KERNEL__ */
+#endif
+
 #endif
diff --git a/include/asm-x86_64/unwind.h b/include/asm-x86_64/unwind.h
index f3e7124..1f6e9bf 100644
--- a/include/asm-x86_64/unwind.h
+++ b/include/asm-x86_64/unwind.h
@@ -95,6 +95,7 @@
 #else
 
 #define UNW_PC(frame) ((void)(frame), 0)
+#define UNW_SP(frame) ((void)(frame), 0)
 
 static inline int arch_unw_user_mode(const void *info)
 {
diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
index 11487b6..561e2a7 100644
--- a/include/linux/delayacct.h
+++ b/include/linux/delayacct.h
@@ -59,10 +59,14 @@
 		__delayacct_tsk_init(tsk);
 }
 
-static inline void delayacct_tsk_exit(struct task_struct *tsk)
+/* Free tsk->delays. Called from bad fork and __put_task_struct
+ * where there's no risk of tsk->delays being accessed elsewhere
+ */
+static inline void delayacct_tsk_free(struct task_struct *tsk)
 {
 	if (tsk->delays)
-		__delayacct_tsk_exit(tsk);
+		kmem_cache_free(delayacct_cache, tsk->delays);
+	tsk->delays = NULL;
 }
 
 static inline void delayacct_blkio_start(void)
@@ -101,7 +105,7 @@
 {}
 static inline void delayacct_tsk_init(struct task_struct *tsk)
 {}
-static inline void delayacct_tsk_exit(struct task_struct *tsk)
+static inline void delayacct_tsk_free(struct task_struct *tsk)
 {}
 static inline void delayacct_blkio_start(void)
 {}
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 656b588..f45163c 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -77,6 +77,7 @@
 struct per_cpu_pageset {
 	struct per_cpu_pages pcp[2];	/* 0: hot.  1: cold */
 #ifdef CONFIG_SMP
+	s8 stat_threshold;
 	s8 vm_stat_diff[NR_VM_ZONE_STAT_ITEMS];
 #endif
 } ____cacheline_aligned_in_smp;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4c2839e..c91164e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1292,6 +1292,7 @@
 #define PCI_DEVICE_ID_VIA_8367_0	0x3099
 #define PCI_DEVICE_ID_VIA_8653_0	0x3101
 #define PCI_DEVICE_ID_VIA_8622		0x3102
+#define PCI_DEVICE_ID_VIA_8235_USB_2	0x3104
 #define PCI_DEVICE_ID_VIA_8233C_0	0x3109
 #define PCI_DEVICE_ID_VIA_8361		0x3112
 #define PCI_DEVICE_ID_VIA_XM266		0x3116
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 6674fc1..34ed0d9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -994,7 +994,6 @@
 	 */
 	struct pipe_inode_info *splice_pipe;
 #ifdef	CONFIG_TASK_DELAY_ACCT
-	spinlock_t delays_lock;
 	struct task_delay_info *delays;
 #endif
 };
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 57ca373..36752f1 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -41,24 +41,11 @@
 
 void __delayacct_tsk_init(struct task_struct *tsk)
 {
-	spin_lock_init(&tsk->delays_lock);
-	/* No need to acquire tsk->delays_lock for allocation here unless
-	   __delayacct_tsk_init called after tsk is attached to tasklist
-	*/
 	tsk->delays = kmem_cache_zalloc(delayacct_cache, SLAB_KERNEL);
 	if (tsk->delays)
 		spin_lock_init(&tsk->delays->lock);
 }
 
-void __delayacct_tsk_exit(struct task_struct *tsk)
-{
-	struct task_delay_info *delays = tsk->delays;
-	spin_lock(&tsk->delays_lock);
-	tsk->delays = NULL;
-	spin_unlock(&tsk->delays_lock);
-	kmem_cache_free(delayacct_cache, delays);
-}
-
 /*
  * Start accounting for a delay statistic using
  * its starting timestamp (@start)
@@ -118,8 +105,6 @@
 	struct timespec ts;
 	unsigned long t1,t2,t3;
 
-	spin_lock(&tsk->delays_lock);
-
 	/* Though tsk->delays accessed later, early exit avoids
 	 * unnecessary returning of other data
 	 */
@@ -161,7 +146,6 @@
 	spin_unlock(&tsk->delays->lock);
 
 done:
-	spin_unlock(&tsk->delays_lock);
 	return 0;
 }
 
diff --git a/kernel/exit.c b/kernel/exit.c
index dba194a..d891883 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -908,7 +908,6 @@
 		audit_free(tsk);
 	taskstats_exit_send(tsk, tidstats, group_dead, mycpu);
 	taskstats_exit_free(tidstats);
-	delayacct_tsk_exit(tsk);
 
 	exit_mm(tsk);
 
@@ -1054,7 +1053,7 @@
 	 * Do not consider thread group leaders that are
 	 * in a non-empty thread group:
 	 */
-	if (current->tgid != p->tgid && delay_group_leader(p))
+	if (delay_group_leader(p))
 		return 2;
 
 	if (security_task_wait(p))
diff --git a/kernel/fork.c b/kernel/fork.c
index aa36c43..f9b014e 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -117,6 +117,7 @@
 	security_task_free(tsk);
 	free_uid(tsk->user);
 	put_group_info(tsk->group_info);
+	delayacct_tsk_free(tsk);
 
 	if (!profile_handoff_task(tsk))
 		free_task(tsk);
@@ -1011,7 +1012,7 @@
 	retval = -EFAULT;
 	if (clone_flags & CLONE_PARENT_SETTID)
 		if (put_user(p->pid, parent_tidptr))
-			goto bad_fork_cleanup;
+			goto bad_fork_cleanup_delays_binfmt;
 
 	INIT_LIST_HEAD(&p->children);
 	INIT_LIST_HEAD(&p->sibling);
@@ -1277,7 +1278,8 @@
 bad_fork_cleanup_cpuset:
 #endif
 	cpuset_exit(p);
-bad_fork_cleanup:
+bad_fork_cleanup_delays_binfmt:
+	delayacct_tsk_free(p);
 	if (p->binfmt)
 		module_put(p->binfmt->module);
 bad_fork_cleanup_put_domain:
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index fc4e906..48a53f6 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -20,6 +20,11 @@
 
 /**
  * handle_bad_irq - handle spurious and unhandled irqs
+ * @irq:       the interrupt number
+ * @desc:      description of the interrupt
+ * @regs:      pointer to a register structure
+ *
+ * Handles spurious and unhandled IRQ's. It also prints a debugmessage.
  */
 void fastcall
 handle_bad_irq(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e07e27e..a9963ce 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1176,7 +1176,15 @@
 	if (vma) {
 		unsigned long off;
 
-		off = vma->vm_pgoff;
+		/*
+		 * for small pages, there is no difference between
+		 * shift and PAGE_SHIFT, so the bit-shift is safe.
+		 * for huge pages, since vm_pgoff is in units of small
+		 * pages, we need to shift off the always 0 bits to get
+		 * a useful offset.
+		 */
+		BUG_ON(shift < PAGE_SHIFT);
+		off = vma->vm_pgoff >> (shift - PAGE_SHIFT);
 		off += (addr - vma->vm_start) >> shift;
 		return offset_il_node(pol, vma, off);
 	} else
diff --git a/mm/mempool.c b/mm/mempool.c
index fe6e052..ccd8cb8 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -238,8 +238,13 @@
 	init_wait(&wait);
 	prepare_to_wait(&pool->wait, &wait, TASK_UNINTERRUPTIBLE);
 	smp_mb();
-	if (!pool->curr_nr)
-		io_schedule();
+	if (!pool->curr_nr) {
+		/*
+		 * FIXME: this should be io_schedule().  The timeout is there
+		 * as a workaround for some DM problems in 2.6.18.
+		 */
+		io_schedule_timeout(5*HZ);
+	}
 	finish_wait(&pool->wait, &wait);
 
 	goto repeat_alloc;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index dfdf241..c1b5f41 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -12,6 +12,7 @@
 #include <linux/config.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/cpu.h>
 
 void __get_zone_counts(unsigned long *active, unsigned long *inactive,
 			unsigned long *free, struct pglist_data *pgdat)
@@ -114,17 +115,72 @@
 
 #ifdef CONFIG_SMP
 
-#define STAT_THRESHOLD 32
+static int calculate_threshold(struct zone *zone)
+{
+	int threshold;
+	int mem;	/* memory in 128 MB units */
+
+	/*
+	 * The threshold scales with the number of processors and the amount
+	 * of memory per zone. More memory means that we can defer updates for
+	 * longer, more processors could lead to more contention.
+ 	 * fls() is used to have a cheap way of logarithmic scaling.
+	 *
+	 * Some sample thresholds:
+	 *
+	 * Threshold	Processors	(fls)	Zonesize	fls(mem+1)
+	 * ------------------------------------------------------------------
+	 * 8		1		1	0.9-1 GB	4
+	 * 16		2		2	0.9-1 GB	4
+	 * 20 		2		2	1-2 GB		5
+	 * 24		2		2	2-4 GB		6
+	 * 28		2		2	4-8 GB		7
+	 * 32		2		2	8-16 GB		8
+	 * 4		2		2	<128M		1
+	 * 30		4		3	2-4 GB		5
+	 * 48		4		3	8-16 GB		8
+	 * 32		8		4	1-2 GB		4
+	 * 32		8		4	0.9-1GB		4
+	 * 10		16		5	<128M		1
+	 * 40		16		5	900M		4
+	 * 70		64		7	2-4 GB		5
+	 * 84		64		7	4-8 GB		6
+	 * 108		512		9	4-8 GB		6
+	 * 125		1024		10	8-16 GB		8
+	 * 125		1024		10	16-32 GB	9
+	 */
+
+	mem = zone->present_pages >> (27 - PAGE_SHIFT);
+
+	threshold = 2 * fls(num_online_cpus()) * (1 + fls(mem));
+
+	/*
+	 * Maximum threshold is 125
+	 */
+	threshold = min(125, threshold);
+
+	return threshold;
+}
 
 /*
- * Determine pointer to currently valid differential byte given a zone and
- * the item number.
- *
- * Preemption must be off
+ * Refresh the thresholds for each zone.
  */
-static inline s8 *diff_pointer(struct zone *zone, enum zone_stat_item item)
+static void refresh_zone_stat_thresholds(void)
 {
-	return &zone_pcp(zone, smp_processor_id())->vm_stat_diff[item];
+	struct zone *zone;
+	int cpu;
+	int threshold;
+
+	for_each_zone(zone) {
+
+		if (!zone->present_pages)
+			continue;
+
+		threshold = calculate_threshold(zone);
+
+		for_each_online_cpu(cpu)
+			zone_pcp(zone, cpu)->stat_threshold = threshold;
+	}
 }
 
 /*
@@ -133,17 +189,16 @@
 void __mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
 				int delta)
 {
-	s8 *p;
+	struct per_cpu_pageset *pcp = zone_pcp(zone, smp_processor_id());
+	s8 *p = pcp->vm_stat_diff + item;
 	long x;
 
-	p = diff_pointer(zone, item);
 	x = delta + *p;
 
-	if (unlikely(x > STAT_THRESHOLD || x < -STAT_THRESHOLD)) {
+	if (unlikely(x > pcp->stat_threshold || x < -pcp->stat_threshold)) {
 		zone_page_state_add(x, zone, item);
 		x = 0;
 	}
-
 	*p = x;
 }
 EXPORT_SYMBOL(__mod_zone_page_state);
@@ -172,10 +227,12 @@
  * No overflow check is necessary and therefore the differential can be
  * incremented or decremented in place which may allow the compilers to
  * generate better code.
- *
  * The increment or decrement is known and therefore one boundary check can
  * be omitted.
  *
+ * NOTE: These functions are very performance sensitive. Change only
+ * with care.
+ *
  * Some processors have inc/dec instructions that are atomic vs an interrupt.
  * However, the code must first determine the differential location in a zone
  * based on the processor number and then inc/dec the counter. There is no
@@ -185,13 +242,16 @@
  */
 static void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
 {
-	s8 *p = diff_pointer(zone, item);
+	struct per_cpu_pageset *pcp = zone_pcp(zone, smp_processor_id());
+	s8 *p = pcp->vm_stat_diff + item;
 
 	(*p)++;
 
-	if (unlikely(*p > STAT_THRESHOLD)) {
-		zone_page_state_add(*p, zone, item);
-		*p = 0;
+	if (unlikely(*p > pcp->stat_threshold)) {
+		int overstep = pcp->stat_threshold / 2;
+
+		zone_page_state_add(*p + overstep, zone, item);
+		*p = -overstep;
 	}
 }
 
@@ -204,13 +264,16 @@
 void __dec_zone_page_state(struct page *page, enum zone_stat_item item)
 {
 	struct zone *zone = page_zone(page);
-	s8 *p = diff_pointer(zone, item);
+	struct per_cpu_pageset *pcp = zone_pcp(zone, smp_processor_id());
+	s8 *p = pcp->vm_stat_diff + item;
 
 	(*p)--;
 
-	if (unlikely(*p < -STAT_THRESHOLD)) {
-		zone_page_state_add(*p, zone, item);
-		*p = 0;
+	if (unlikely(*p < - pcp->stat_threshold)) {
+		int overstep = pcp->stat_threshold / 2;
+
+		zone_page_state_add(*p - overstep, zone, item);
+		*p = overstep;
 	}
 }
 EXPORT_SYMBOL(__dec_zone_page_state);
@@ -239,19 +302,9 @@
 void dec_zone_page_state(struct page *page, enum zone_stat_item item)
 {
 	unsigned long flags;
-	struct zone *zone;
-	s8 *p;
 
-	zone = page_zone(page);
 	local_irq_save(flags);
-	p = diff_pointer(zone, item);
-
-	(*p)--;
-
-	if (unlikely(*p < -STAT_THRESHOLD)) {
-		zone_page_state_add(*p, zone, item);
-		*p = 0;
-	}
+	__dec_zone_page_state(page, item);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(dec_zone_page_state);
@@ -525,6 +578,10 @@
 					   pageset->pcp[j].high,
 					   pageset->pcp[j].batch);
 			}
+#ifdef CONFIG_SMP
+			seq_printf(m, "\n  vm stats threshold: %d",
+					pageset->stat_threshold);
+#endif
 		}
 		seq_printf(m,
 			   "\n  all_unreclaimable: %u"
@@ -613,3 +670,35 @@
 
 #endif /* CONFIG_PROC_FS */
 
+#ifdef CONFIG_SMP
+/*
+ * Use the cpu notifier to insure that the thresholds are recalculated
+ * when necessary.
+ */
+static int __cpuinit vmstat_cpuup_callback(struct notifier_block *nfb,
+		unsigned long action,
+		void *hcpu)
+{
+	switch (action) {
+		case CPU_UP_PREPARE:
+		case CPU_UP_CANCELED:
+		case CPU_DEAD:
+			refresh_zone_stat_thresholds();
+			break;
+		default:
+			break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata vmstat_notifier =
+	{ &vmstat_cpuup_callback, NULL, 0 };
+
+int __init setup_vmstat(void)
+{
+	refresh_zone_stat_thresholds();
+	register_cpu_notifier(&vmstat_notifier);
+	return 0;
+}
+module_init(setup_vmstat)
+#endif
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 4c20f55..a2ede16 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -440,6 +440,7 @@
 	iph = skb->nh.iph;
 
 	if (unlikely((iph->frag_off & htons(IP_DF)) && !skb->local_df)) {
+		IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
 		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
 			  htonl(dst_mtu(&rt->u.dst)));
 		kfree_skb(skb);
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index 5765f9d..7ff2e42 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -189,7 +189,7 @@
 			return;
 
 		/* We MAY increase by 2 if discovered delayed ack */
-		if (sysctl_tcp_abc > 1 && tp->bytes_acked > 2*tp->mss_cache) {
+		if (sysctl_tcp_abc > 1 && tp->bytes_acked >= 2*tp->mss_cache) {
 			if (tp->snd_cwnd < tp->snd_cwnd_clamp)
 				tp->snd_cwnd++;
 		}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 104af5d5..111ff39 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2505,8 +2505,13 @@
 	if (before(ack, prior_snd_una))
 		goto old_ack;
 
-	if (sysctl_tcp_abc && icsk->icsk_ca_state < TCP_CA_CWR)
-		tp->bytes_acked += ack - prior_snd_una;
+	if (sysctl_tcp_abc) {
+		if (icsk->icsk_ca_state < TCP_CA_CWR)
+			tp->bytes_acked += ack - prior_snd_una;
+		else if (icsk->icsk_ca_state == TCP_CA_Loss)
+			/* we assume just one segment left network */
+			tp->bytes_acked += min(ack - prior_snd_una, tp->mss_cache);
+	}
 
 	if (!(flag&FLAG_SLOWPATH) && after(ack, prior_snd_una)) {
 		/* Window is constant, pure forward advance.
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 0c5042e..c7852b3 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -578,6 +578,8 @@
 	ifa->flags = flags | IFA_F_TENTATIVE;
 	ifa->cstamp = ifa->tstamp = jiffies;
 
+	ifa->rt = rt;
+
 	ifa->idev = idev;
 	in6_dev_hold(idev);
 	/* For caller */
@@ -603,8 +605,6 @@
 	}
 #endif
 
-	ifa->rt = rt;
-
 	in6_ifa_hold(ifa);
 	write_unlock(&idev->lock);
 out2:
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 9d0ee7f..86dac10 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -635,14 +635,17 @@
 	struct ipv6_txoptions *opt2;
 	int err;
 
-	if (newtype != IPV6_HOPOPTS && opt->hopopt)
-		tot_len += CMSG_ALIGN(ipv6_optlen(opt->hopopt));
-	if (newtype != IPV6_RTHDRDSTOPTS && opt->dst0opt)
-		tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst0opt));
-	if (newtype != IPV6_RTHDR && opt->srcrt)
-		tot_len += CMSG_ALIGN(ipv6_optlen(opt->srcrt));
-	if (newtype != IPV6_DSTOPTS && opt->dst1opt)
-		tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst1opt));
+	if (opt) {
+		if (newtype != IPV6_HOPOPTS && opt->hopopt)
+			tot_len += CMSG_ALIGN(ipv6_optlen(opt->hopopt));
+		if (newtype != IPV6_RTHDRDSTOPTS && opt->dst0opt)
+			tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst0opt));
+		if (newtype != IPV6_RTHDR && opt->srcrt)
+			tot_len += CMSG_ALIGN(ipv6_optlen(opt->srcrt));
+		if (newtype != IPV6_DSTOPTS && opt->dst1opt)
+			tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst1opt));
+	}
+
 	if (newopt && newoptlen)
 		tot_len += CMSG_ALIGN(newoptlen);
 
@@ -659,25 +662,25 @@
 	opt2->tot_len = tot_len;
 	p = (char *)(opt2 + 1);
 
-	err = ipv6_renew_option(opt->hopopt, newopt, newoptlen,
+	err = ipv6_renew_option(opt ? opt->hopopt : NULL, newopt, newoptlen,
 				newtype != IPV6_HOPOPTS,
 				&opt2->hopopt, &p);
 	if (err)
 		goto out;
 
-	err = ipv6_renew_option(opt->dst0opt, newopt, newoptlen,
+	err = ipv6_renew_option(opt ? opt->dst0opt : NULL, newopt, newoptlen,
 				newtype != IPV6_RTHDRDSTOPTS,
 				&opt2->dst0opt, &p);
 	if (err)
 		goto out;
 
-	err = ipv6_renew_option(opt->srcrt, newopt, newoptlen,
+	err = ipv6_renew_option(opt ? opt->srcrt : NULL, newopt, newoptlen,
 				newtype != IPV6_RTHDR,
-				(struct ipv6_opt_hdr **)opt2->srcrt, &p);
+				(struct ipv6_opt_hdr **)&opt2->srcrt, &p);
 	if (err)
 		goto out;
 
-	err = ipv6_renew_option(opt->dst1opt, newopt, newoptlen,
+	err = ipv6_renew_option(opt ? opt->dst1opt : NULL, newopt, newoptlen,
 				newtype != IPV6_DSTOPTS,
 				&opt2->dst1opt, &p);
 	if (err)
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 4b16371..d9baca0 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1532,6 +1532,10 @@
 
 static int ip6_pkt_discard(struct sk_buff *skb)
 {
+	int type = ipv6_addr_type(&skb->nh.ipv6h->daddr);
+	if (type == IPV6_ADDR_ANY || type == IPV6_ADDR_RESERVED)
+		IP6_INC_STATS(IPSTATS_MIB_INADDRERRORS);
+
 	IP6_INC_STATS(IPSTATS_MIB_OUTNOROUTES);
 	icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_NOROUTE, 0, skb->dev);
 	kfree_skb(skb);
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index b85c1f9..8b85036 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1273,8 +1273,7 @@
 	struct netlink_sock *nlk;
 	unsigned long *listeners = NULL;
 
-	if (!nl_table)
-		return NULL;
+	BUG_ON(!nl_table);
 
 	if (unit<0 || unit>=MAX_LINKS)
 		return NULL;
@@ -1745,11 +1744,8 @@
 		netlink_skb_parms_too_large();
 
 	nl_table = kcalloc(MAX_LINKS, sizeof(*nl_table), GFP_KERNEL);
-	if (!nl_table) {
-enomem:
-		printk(KERN_CRIT "netlink_init: Cannot allocate nl_table\n");
-		return -ENOMEM;
-	}
+	if (!nl_table)
+		goto panic;
 
 	if (num_physpages >= (128 * 1024))
 		max = num_physpages >> (21 - PAGE_SHIFT);
@@ -1769,7 +1765,7 @@
 				nl_pid_hash_free(nl_table[i].hash.table,
 						 1 * sizeof(*hash->table));
 			kfree(nl_table);
-			goto enomem;
+			goto panic;
 		}
 		memset(hash->table, 0, 1 * sizeof(*hash->table));
 		hash->max_shift = order;
@@ -1786,6 +1782,8 @@
 	rtnetlink_init();
 out:
 	return err;
+panic:
+	panic("netlink_init: Cannot allocate nl_table\n");
 }
 
 core_initcall(netlink_proto_init);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index fde3f55..dab1594 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1289,9 +1289,13 @@
 			}
 		}
 
-		if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)
-			sctp_primitive_ABORT(asoc, NULL);
-		else
+		if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime) {
+			struct sctp_chunk *chunk;
+
+			chunk = sctp_make_abort_user(asoc, NULL, 0);
+			if (chunk)
+				sctp_primitive_ABORT(asoc, chunk);
+		} else
 			sctp_primitive_SHUTDOWN(asoc, NULL);
 	}
 
diff --git a/net/socket.c b/net/socket.c
index b4848ce..6d261bf 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1178,7 +1178,8 @@
  */
 
 	if (!(sock = sock_alloc())) {
-		printk(KERN_WARNING "socket: no more sockets\n");
+		if (net_ratelimit())
+			printk(KERN_WARNING "socket: no more sockets\n");
 		err = -ENFILE;		/* Not exactly a match, but its the
 					   closest posix thing */
 		goto out;
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 1b7c3df..97e38b6 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,6 +5,20 @@
 #
 # Prompt user for primary drivers.
 
+config OSS_OBSOLETE_DRIVER
+	bool "Obsolete OSS drivers"
+	depends on SOUND_PRIME
+	help
+	  This option enables support for obsolete OSS drivers that
+	  are scheduled for removal in the near future since there
+	  are ALSA drivers for the same hardware.
+
+	  Please contact Adrian Bunk <bunk@stusta.de> if you had to
+	  say Y here because your soundcard is not properly supported
+	  by ALSA.
+
+	  If unsure, say N.
+
 config SOUND_BT878
 	tristate "BT878 audio dma"
 	depends on SOUND_PRIME && PCI
@@ -23,7 +37,7 @@
 
 config SOUND_EMU10K1
 	tristate "Creative SBLive! (EMU10K1)"
-	depends on SOUND_PRIME && PCI
+	depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
 	---help---
 	  Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
 	  such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -49,7 +63,7 @@
 
 config SOUND_FUSION
 	tristate "Crystal SoundFusion (CS4280/461x)"
-	depends on SOUND_PRIME && PCI
+	depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
 	help
 	  This module drives the Crystal SoundFusion devices (CS4280/46xx
 	  series) when wired as native sound drivers with AC97 codecs.  If
@@ -440,7 +454,7 @@
 
 config SOUND_AD1816
 	tristate "AD1816(A) based cards (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && SOUND_OSS
+	depends on EXPERIMENTAL && SOUND_OSS && OSS_OBSOLETE_DRIVER
 	help
 	  Say M here if you have a sound card based on the Analog Devices
 	  AD1816(A) chip.
@@ -450,21 +464,21 @@
 
 config SOUND_AD1889
 	tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && SOUND_OSS && PCI
+	depends on EXPERIMENTAL && SOUND_OSS && PCI && OSS_OBSOLETE_DRIVER
 	help
 	  Say M here if you have a sound card based on the Analog Devices
 	  AD1889 chip.
 
 config SOUND_ADLIB
 	tristate "Adlib Cards"
-	depends on SOUND_OSS
+	depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
 	help
 	  Includes ASB 64 4D. Information on programming AdLib cards is
 	  available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
 
 config SOUND_ACI_MIXER
 	tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
-	depends on SOUND_OSS
+	depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
 	---help---
 	  ACI (Audio Command Interface) is a protocol used to communicate with
 	  the microcontroller on some sound cards produced by miro and
@@ -586,7 +600,7 @@
 
 config SOUND_NM256
 	tristate "NM256AV/NM256ZX audio support"
-	depends on SOUND_OSS
+	depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
 	help
 	  Say M here to include audio support for the NeoMagic 256AV/256ZX
 	  chipsets. These are the audio chipsets found in the Sony
@@ -706,7 +720,7 @@
 
 config SOUND_OPL3SA2
 	tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
-	depends on SOUND_OSS
+	depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
 	help
 	  Say Y or M if you have a card based on one of these Yamaha sound
 	  chipsets or the "SAx", which is actually a SA3. Read
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 0abf280..51e83d7 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -573,7 +573,7 @@
 };
 
 static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
-	AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_MIC, 6, 1, 0);
+	AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0);
 
 
 static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"};
@@ -615,7 +615,7 @@
 AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
 AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0),
 AC97_ENUM("Mono Output Select", std_enum[2]),
-AC97_ENUM("Mic Select Capture Switch", std_enum[3]),
+AC97_ENUM("Mic Select", std_enum[3]),
 AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
 };