| /* |
| * Exynos specific support for Samsung pinctrl/gpiolib driver with eint support. |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * Copyright (c) 2012 Linaro Ltd |
| * http://www.linaro.org |
| * |
| * Author: Thomas Abraham <thomas.ab@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This file contains the Samsung Exynos specific information required by the |
| * the Samsung pinctrl/gpiolib driver. It also includes the implementation of |
| * external gpio and wakeup interrupt support. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/regmap.h> |
| #include <linux/err.h> |
| #include <linux/soc/samsung/exynos-pmu.h> |
| |
| #include <dt-bindings/pinctrl/samsung.h> |
| |
| #include "pinctrl-samsung.h" |
| #include "pinctrl-exynos.h" |
| |
| struct exynos_irq_chip { |
| struct irq_chip chip; |
| |
| u32 eint_con; |
| u32 eint_mask; |
| u32 eint_pend; |
| }; |
| |
| #ifdef CONFIG_SOC_EXYNOS9820_EVT0 |
| static unsigned int smpl_irq; |
| |
| unsigned int get_smpl_irq_num(void) |
| { |
| return smpl_irq; |
| } |
| #endif |
| |
| static inline struct exynos_irq_chip *to_exynos_irq_chip(struct irq_chip *chip) |
| { |
| return container_of(chip, struct exynos_irq_chip, chip); |
| } |
| |
| static void exynos_irq_mask(struct irq_data *irqd) |
| { |
| struct irq_chip *chip = irq_data_get_irq_chip(irqd); |
| struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset; |
| unsigned int mask; |
| unsigned long flags; |
| |
| #ifdef CONFIG_SOC_EXYNOS9820_EVT0 |
| if (!strncmp(bank->name, "gpp3", 4) && (irqd->hwirq == 4)) |
| return ; |
| #endif |
| |
| spin_lock_irqsave(&bank->slock, flags); |
| |
| mask = readl(bank->eint_base + reg_mask); |
| mask |= 1 << irqd->hwirq; |
| writel(mask, bank->eint_base + reg_mask); |
| |
| spin_unlock_irqrestore(&bank->slock, flags); |
| } |
| |
| static void exynos_irq_ack(struct irq_data *irqd) |
| { |
| struct irq_chip *chip = irq_data_get_irq_chip(irqd); |
| struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset; |
| |
| writel(1 << irqd->hwirq, bank->eint_base + reg_pend); |
| } |
| |
| static void exynos_irq_unmask(struct irq_data *irqd) |
| { |
| struct irq_chip *chip = irq_data_get_irq_chip(irqd); |
| struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset; |
| unsigned int mask; |
| unsigned long flags; |
| |
| /* |
| * Ack level interrupts right before unmask |
| * |
| * If we don't do this we'll get a double-interrupt. Level triggered |
| * interrupts must not fire an interrupt if the level is not |
| * _currently_ active, even if it was active while the interrupt was |
| * masked. |
| */ |
| if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK) |
| exynos_irq_ack(irqd); |
| |
| spin_lock_irqsave(&bank->slock, flags); |
| |
| mask = readl(bank->eint_base + reg_mask); |
| mask &= ~(1 << irqd->hwirq); |
| writel(mask, bank->eint_base + reg_mask); |
| |
| spin_unlock_irqrestore(&bank->slock, flags); |
| } |
| |
| static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type) |
| { |
| struct irq_chip *chip = irq_data_get_irq_chip(irqd); |
| struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| unsigned int shift = EXYNOS_EINT_CON_LEN * irqd->hwirq; |
| unsigned int con, trig_type; |
| unsigned long reg_con = our_chip->eint_con + bank->eint_offset; |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| trig_type = EXYNOS_EINT_EDGE_RISING; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| trig_type = EXYNOS_EINT_EDGE_FALLING; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| trig_type = EXYNOS_EINT_EDGE_BOTH; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| trig_type = EXYNOS_EINT_LEVEL_HIGH; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| trig_type = EXYNOS_EINT_LEVEL_LOW; |
| break; |
| default: |
| pr_err("unsupported external interrupt type\n"); |
| return -EINVAL; |
| } |
| |
| if (type & IRQ_TYPE_EDGE_BOTH) |
| irq_set_handler_locked(irqd, handle_edge_irq); |
| else |
| irq_set_handler_locked(irqd, handle_level_irq); |
| |
| con = readl(bank->eint_base + reg_con); |
| con &= ~(EXYNOS_EINT_CON_MASK << shift); |
| con |= trig_type << shift; |
| writel(con, bank->eint_base + reg_con); |
| |
| return 0; |
| } |
| |
| static int exynos_irq_request_resources(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| const struct samsung_pin_bank_type *bank_type = bank->type; |
| unsigned long reg_con, flags; |
| unsigned int shift, mask, con; |
| int ret; |
| |
| ret = gpiochip_lock_as_irq(&bank->gpio_chip, irqd->hwirq); |
| if (ret) { |
| dev_err(bank->gpio_chip.parent, |
| "unable to lock pin %s-%lu IRQ\n", |
| bank->name, irqd->hwirq); |
| return ret; |
| } |
| |
| reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC]; |
| shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC]; |
| mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; |
| |
| spin_lock_irqsave(&bank->slock, flags); |
| |
| con = readl(bank->pctl_base + reg_con); |
| con &= ~(mask << shift); |
| con |= EXYNOS_PIN_FUNC_EINT << shift; |
| writel(con, bank->pctl_base + reg_con); |
| |
| spin_unlock_irqrestore(&bank->slock, flags); |
| |
| return 0; |
| } |
| |
| static void exynos_irq_release_resources(struct irq_data *irqd) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| const struct samsung_pin_bank_type *bank_type = bank->type; |
| unsigned long reg_con, flags; |
| unsigned int shift, mask, con; |
| |
| reg_con = bank->pctl_offset + bank_type->reg_offset[PINCFG_TYPE_FUNC]; |
| shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC]; |
| mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; |
| |
| spin_lock_irqsave(&bank->slock, flags); |
| |
| con = readl(bank->pctl_base + reg_con); |
| con &= ~(mask << shift); |
| con |= EXYNOS_PIN_FUNC_INPUT << shift; |
| writel(con, bank->pctl_base + reg_con); |
| |
| spin_unlock_irqrestore(&bank->slock, flags); |
| |
| gpiochip_unlock_as_irq(&bank->gpio_chip, irqd->hwirq); |
| } |
| |
| /* |
| * irq_chip for gpio interrupts. |
| */ |
| static struct exynos_irq_chip exynos_gpio_irq_chip = { |
| .chip = { |
| .name = "exynos_gpio_irq_chip", |
| .irq_unmask = exynos_irq_unmask, |
| .irq_mask = exynos_irq_mask, |
| .irq_ack = exynos_irq_ack, |
| .irq_set_type = exynos_irq_set_type, |
| .irq_request_resources = exynos_irq_request_resources, |
| .irq_release_resources = exynos_irq_release_resources, |
| }, |
| .eint_con = EXYNOS_GPIO_ECON_OFFSET, |
| .eint_mask = EXYNOS_GPIO_EMASK_OFFSET, |
| .eint_pend = EXYNOS_GPIO_EPEND_OFFSET, |
| }; |
| |
| static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| struct samsung_pin_bank *b = h->host_data; |
| |
| irq_set_chip_data(virq, b); |
| irq_set_chip_and_handler(virq, &b->irq_chip->chip, |
| handle_level_irq); |
| return 0; |
| } |
| |
| /* |
| * irq domain callbacks for external gpio and wakeup interrupt controllers. |
| */ |
| static const struct irq_domain_ops exynos_eint_irqd_ops = { |
| .map = exynos_eint_irq_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) |
| { |
| struct samsung_pinctrl_drv_data *d = data; |
| struct samsung_pin_bank *bank = d->pin_banks; |
| unsigned int svc, group, pin, virq; |
| |
| svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET); |
| group = EXYNOS_SVC_GROUP(svc); |
| pin = svc & EXYNOS_SVC_NUM_MASK; |
| |
| if (!group) |
| return IRQ_HANDLED; |
| bank += (group - 1); |
| |
| virq = irq_linear_revmap(bank->irq_domain, pin); |
| if (!virq) |
| return IRQ_NONE; |
| generic_handle_irq(virq); |
| return IRQ_HANDLED; |
| } |
| |
| struct exynos_eint_gpio_save { |
| u32 eint_con; |
| u32 eint_fltcon0; |
| u32 eint_fltcon1; |
| }; |
| |
| static void exynos_eint_flt_config(int en, int sel, int width, |
| struct samsung_pinctrl_drv_data *d, |
| struct samsung_pin_bank *bank) |
| { |
| unsigned int flt_reg, flt_con; |
| unsigned int val, shift; |
| int i; |
| int loop_cnt; |
| |
| flt_con = 0; |
| |
| if (en) |
| flt_con |= EXYNOS_EINT_FLTCON_EN; |
| |
| if (sel) |
| flt_con |= EXYNOS_EINT_FLTCON_SEL; |
| |
| flt_con |= EXYNOS_EINT_FLTCON_WIDTH(width); |
| |
| flt_reg = EXYNOS_GPIO_EFLTCON_OFFSET + bank->fltcon_offset; |
| |
| if (bank->nr_pins > 4) |
| /* if nr_pins > 4, we should set FLTCON0 register fully. (pin0 ~ 3) */ |
| /* So, we shoud loop 4 times in case of FLTCON0. */ |
| loop_cnt = 4; |
| else |
| loop_cnt = bank->nr_pins; |
| |
| val = readl(d->virt_base + flt_reg); |
| |
| for (i = 0; i < loop_cnt; i++) { |
| shift = i * EXYNOS_EINT_FLTCON_LEN; |
| val &= ~(EXYNOS_EINT_FLTCON_MASK << shift); |
| val |= (flt_con << shift); |
| } |
| |
| writel(val, d->virt_base + flt_reg); |
| |
| /* if nr_pins > 4, we should also set FLTCON1 register like FLTCON0. (pin4 ~ ) */ |
| if (bank->nr_pins > 4) |
| writel(val, d->virt_base + flt_reg + 0x4); |
| }; |
| |
| /* |
| * exynos_eint_gpio_init() - setup handling of external gpio interrupts. |
| * @d: driver data of samsung pinctrl driver. |
| */ |
| int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) |
| { |
| struct samsung_pin_bank *bank; |
| struct device *dev = d->dev; |
| int ret; |
| int i; |
| |
| if (!d->irq) { |
| dev_err(dev, "irq number not available\n"); |
| return -EINVAL; |
| } |
| |
| ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq, |
| 0, dev_name(dev), d); |
| if (ret) { |
| dev_err(dev, "irq request failed\n"); |
| return ret; |
| } |
| |
| bank = d->pin_banks; |
| for (i = 0; i < d->nr_banks; ++i, ++bank) { |
| if (bank->eint_type != EINT_TYPE_GPIO) |
| continue; |
| bank->irq_domain = irq_domain_add_linear(bank->of_node, |
| bank->nr_pins, &exynos_eint_irqd_ops, bank); |
| if (!bank->irq_domain) { |
| dev_err(dev, "gpio irq domain add failed\n"); |
| ret = -ENXIO; |
| goto err_domains; |
| } |
| |
| bank->soc_priv = devm_kzalloc(d->dev, |
| sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); |
| if (!bank->soc_priv) { |
| irq_domain_remove(bank->irq_domain); |
| ret = -ENOMEM; |
| goto err_domains; |
| } |
| |
| bank->irq_chip = &exynos_gpio_irq_chip; |
| |
| /* There is no filter selection register except for alive block */ |
| /* Except for alive block, digital filter is default setting */ |
| exynos_eint_flt_config(EXYNOS_EINT_FLTCON_EN, 0, 0, d, bank); |
| |
| #ifdef CONFIG_SOC_EXYNOS9820_EVT0 |
| if (!strncmp(bank->name, "gpp3", 4)) |
| smpl_irq = d->irq; |
| #endif |
| } |
| |
| return 0; |
| |
| err_domains: |
| for (--i, --bank; i >= 0; --i, --bank) { |
| if (bank->eint_type != EINT_TYPE_GPIO) |
| continue; |
| irq_domain_remove(bank->irq_domain); |
| } |
| |
| return ret; |
| } |
| |
| static u64 exynos_eint_wake_mask = ULLONG_MAX; |
| |
| u64 exynos_get_eint_wake_mask(void) |
| { |
| return exynos_eint_wake_mask; |
| } |
| |
| static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on) |
| { |
| struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); |
| unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq); |
| |
| pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq); |
| |
| if (!on) |
| exynos_eint_wake_mask |= bit; |
| else |
| exynos_eint_wake_mask &= ~bit; |
| |
| return 0; |
| } |
| |
| /* |
| * irq_chip for wakeup interrupts |
| */ |
| static const struct exynos_irq_chip exynos4210_wkup_irq_chip __initconst = { |
| .chip = { |
| .name = "exynos4210_wkup_irq_chip", |
| .irq_unmask = exynos_irq_unmask, |
| .irq_mask = exynos_irq_mask, |
| .irq_ack = exynos_irq_ack, |
| .irq_set_type = exynos_irq_set_type, |
| .irq_set_wake = exynos_wkup_irq_set_wake, |
| .irq_request_resources = exynos_irq_request_resources, |
| .irq_release_resources = exynos_irq_release_resources, |
| }, |
| .eint_con = EXYNOS_WKUP_ECON_OFFSET, |
| .eint_mask = EXYNOS_WKUP_EMASK_OFFSET, |
| .eint_pend = EXYNOS_WKUP_EPEND_OFFSET, |
| }; |
| |
| static const struct exynos_irq_chip exynos7_wkup_irq_chip __initconst = { |
| .chip = { |
| .name = "exynos7_wkup_irq_chip", |
| .irq_unmask = exynos_irq_unmask, |
| .irq_mask = exynos_irq_mask, |
| .irq_ack = exynos_irq_ack, |
| .irq_set_type = exynos_irq_set_type, |
| .irq_set_wake = exynos_wkup_irq_set_wake, |
| .irq_request_resources = exynos_irq_request_resources, |
| .irq_release_resources = exynos_irq_release_resources, |
| }, |
| .eint_con = EXYNOS7_WKUP_ECON_OFFSET, |
| .eint_mask = EXYNOS7_WKUP_EMASK_OFFSET, |
| .eint_pend = EXYNOS7_WKUP_EPEND_OFFSET, |
| }; |
| |
| /* list of external wakeup controllers supported */ |
| static const struct of_device_id exynos_wkup_irq_ids[] = { |
| { .compatible = "samsung,exynos4210-wakeup-eint", |
| .data = &exynos4210_wkup_irq_chip }, |
| { .compatible = "samsung,exynos7-wakeup-eint", |
| .data = &exynos7_wkup_irq_chip }, |
| { } |
| }; |
| |
| /* interrupt handler for wakeup interrupts 0..15 */ |
| static void exynos_irq_eint0_15(struct irq_desc *desc) |
| { |
| struct exynos_weint_data *eintd = irq_desc_get_handler_data(desc); |
| struct samsung_pin_bank *bank = eintd->bank; |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| int eint_irq; |
| |
| chained_irq_enter(chip, desc); |
| |
| eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq); |
| generic_handle_irq(eint_irq); |
| |
| chained_irq_exit(chip, desc); |
| } |
| |
| static inline void exynos_irq_demux_eint(unsigned int pend, |
| struct irq_domain *domain) |
| { |
| unsigned int irq; |
| |
| while (pend) { |
| irq = fls(pend) - 1; |
| generic_handle_irq(irq_find_mapping(domain, irq)); |
| pend &= ~(1 << irq); |
| } |
| } |
| |
| /* interrupt handler for wakeup interrupt 16 */ |
| static void exynos_irq_demux_eint16_31(struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| struct exynos_muxed_weint_data *eintd = irq_desc_get_handler_data(desc); |
| unsigned int pend; |
| unsigned int mask; |
| int i; |
| |
| chained_irq_enter(chip, desc); |
| |
| for (i = 0; i < eintd->nr_banks; ++i) { |
| struct samsung_pin_bank *b = eintd->banks[i]; |
| pend = readl(b->eint_base + b->irq_chip->eint_pend |
| + b->eint_offset); |
| mask = readl(b->eint_base + b->irq_chip->eint_mask |
| + b->eint_offset); |
| exynos_irq_demux_eint(pend & ~mask, b->irq_domain); |
| } |
| |
| chained_irq_exit(chip, desc); |
| } |
| |
| /* |
| * exynos_eint_wkup_init() - setup handling of external wakeup interrupts. |
| * @d: driver data of samsung pinctrl driver. |
| */ |
| int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) |
| { |
| struct device *dev = d->dev; |
| struct device_node *wkup_np = NULL; |
| struct device_node *np; |
| struct samsung_pin_bank *bank; |
| struct exynos_weint_data *weint_data; |
| struct exynos_muxed_weint_data *muxed_data; |
| struct exynos_irq_chip *irq_chip; |
| unsigned int muxed_banks = 0; |
| unsigned int i; |
| int idx, irq; |
| |
| for_each_child_of_node(dev->of_node, np) { |
| const struct of_device_id *match; |
| |
| match = of_match_node(exynos_wkup_irq_ids, np); |
| if (match) { |
| irq_chip = kmemdup(match->data, |
| sizeof(*irq_chip), GFP_KERNEL); |
| if (!irq_chip) { |
| of_node_put(np); |
| return -ENOMEM; |
| } |
| wkup_np = np; |
| break; |
| } |
| } |
| if (!wkup_np) |
| return -ENODEV; |
| |
| bank = d->pin_banks; |
| for (i = 0; i < d->nr_banks; ++i, ++bank) { |
| if (bank->eint_type != EINT_TYPE_WKUP) |
| continue; |
| |
| if (strncmp(bank->name, "gpa", 3) == 0) { |
| /* Only alive block has filter selection register. */ |
| /* Setting Digital Filter */ |
| exynos_eint_flt_config(EXYNOS_EINT_FLTCON_EN, |
| EXYNOS_EINT_FLTCON_SEL, 0, d, bank); |
| } else { |
| /* There is no filter selection register except for alive block */ |
| /* Except for alive block, digital filter is default setting */ |
| exynos_eint_flt_config(EXYNOS_EINT_FLTCON_EN, 0, 0, d, bank); |
| } |
| |
| bank->irq_domain = irq_domain_add_linear(bank->of_node, |
| bank->nr_pins, &exynos_eint_irqd_ops, bank); |
| if (!bank->irq_domain) { |
| dev_err(dev, "wkup irq domain add failed\n"); |
| return -ENXIO; |
| } |
| |
| bank->irq_chip = irq_chip; |
| |
| if (!of_find_property(bank->of_node, "interrupts", NULL)) { |
| bank->eint_type = EINT_TYPE_WKUP_MUX; |
| ++muxed_banks; |
| continue; |
| } |
| |
| weint_data = devm_kzalloc(dev, bank->nr_pins |
| * sizeof(*weint_data), GFP_KERNEL); |
| if (!weint_data) |
| return -ENOMEM; |
| |
| for (idx = 0; idx < bank->nr_pins; ++idx) { |
| irq = irq_of_parse_and_map(bank->of_node, idx); |
| if (!irq) { |
| dev_err(dev, "irq number for eint-%s-%d not found\n", |
| bank->name, idx); |
| continue; |
| } |
| weint_data[idx].irq = idx; |
| weint_data[idx].bank = bank; |
| irq_set_chained_handler_and_data(irq, |
| exynos_irq_eint0_15, |
| &weint_data[idx]); |
| } |
| } |
| |
| if (!muxed_banks) |
| return 0; |
| |
| irq = irq_of_parse_and_map(wkup_np, 0); |
| if (!irq) { |
| dev_err(dev, "irq number for muxed EINTs not found\n"); |
| return 0; |
| } |
| |
| muxed_data = devm_kzalloc(dev, sizeof(*muxed_data) |
| + muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL); |
| if (!muxed_data) |
| return -ENOMEM; |
| |
| irq_set_chained_handler_and_data(irq, exynos_irq_demux_eint16_31, |
| muxed_data); |
| |
| bank = d->pin_banks; |
| idx = 0; |
| for (i = 0; i < d->nr_banks; ++i, ++bank) { |
| if (bank->eint_type != EINT_TYPE_WKUP_MUX) |
| continue; |
| |
| muxed_data->banks[idx++] = bank; |
| } |
| muxed_data->nr_banks = muxed_banks; |
| |
| return 0; |
| } |
| |
| static void exynos_pinctrl_suspend_bank( |
| struct samsung_pinctrl_drv_data *drvdata, |
| struct samsung_pin_bank *bank) |
| { |
| struct exynos_eint_gpio_save *save = bank->soc_priv; |
| void __iomem *regs = bank->eint_base; |
| |
| save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET |
| + bank->eint_offset); |
| |
| save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + bank->fltcon_offset); |
| if (bank->nr_pins > 4) |
| save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + bank->fltcon_offset + 4); |
| |
| pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); |
| pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); |
| if (bank->nr_pins > 4) |
| pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); |
| } |
| |
| void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) |
| { |
| struct samsung_pin_bank *bank = drvdata->pin_banks; |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| int i; |
| |
| for (i = 0; i < drvdata->nr_banks; ++i, ++bank) |
| if (bank->eint_type == EINT_TYPE_GPIO) |
| exynos_pinctrl_suspend_bank(drvdata, bank); |
| else if (bank->eint_type == EINT_TYPE_WKUP || |
| bank->eint_type == EINT_TYPE_WKUP_MUX) { |
| /* Setting Analog Filter */ |
| exynos_eint_flt_config(EXYNOS_EINT_FLTCON_EN, |
| 0, 0, d, bank); |
| } |
| } |
| |
| static void exynos_pinctrl_resume_bank( |
| struct samsung_pinctrl_drv_data *drvdata, |
| struct samsung_pin_bank *bank) |
| { |
| struct exynos_eint_gpio_save *save = bank->soc_priv; |
| void __iomem *regs = bank->eint_base; |
| |
| pr_debug("%s: con %#010x => %#010x\n", bank->name, |
| readl(regs + EXYNOS_GPIO_ECON_OFFSET |
| + bank->eint_offset), save->eint_con); |
| pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, |
| readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + bank->fltcon_offset), save->eint_fltcon0); |
| if (bank->nr_pins > 4) { |
| pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, |
| readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + bank->fltcon_offset + 4), save->eint_fltcon1); |
| } |
| |
| writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET |
| + bank->eint_offset); |
| writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + bank->fltcon_offset); |
| if (bank->nr_pins > 4) { |
| writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET |
| + bank->fltcon_offset + 4); |
| } |
| } |
| |
| void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) |
| { |
| struct samsung_pin_bank *bank = drvdata->pin_banks; |
| struct samsung_pinctrl_drv_data *d = bank->drvdata; |
| int i; |
| |
| for (i = 0; i < drvdata->nr_banks; ++i, ++bank) { |
| if (bank->eint_type == EINT_TYPE_GPIO) { |
| exynos_pinctrl_resume_bank(drvdata, bank); |
| } else if (bank->eint_type == EINT_TYPE_WKUP || |
| bank->eint_type == EINT_TYPE_WKUP_MUX) { |
| /* Only alive block(gpa) has filter selection register. */ |
| if (strncmp(bank->name, "gpa", 3) == 0) { |
| /* Setting Digital Filter */ |
| exynos_eint_flt_config(EXYNOS_EINT_FLTCON_EN, |
| EXYNOS_EINT_FLTCON_SEL, 0, d, bank); |
| } else { |
| /* |
| * There is no filter selection register except for alive block. |
| * Except for alive block, digital filter is default setting |
| * without any setting. |
| */ |
| exynos_eint_flt_config(EXYNOS_EINT_FLTCON_EN, 0, 0, d, bank); |
| } |
| } |
| } |
| } |
| |
| static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata) |
| { |
| if (drvdata->retention_ctrl->refcnt) |
| atomic_inc(drvdata->retention_ctrl->refcnt); |
| } |
| |
| static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata) |
| { |
| struct samsung_retention_ctrl *ctrl = drvdata->retention_ctrl; |
| struct regmap *pmu_regs = ctrl->priv; |
| int i; |
| |
| if (ctrl->refcnt && !atomic_dec_and_test(ctrl->refcnt)) |
| return; |
| |
| for (i = 0; i < ctrl->nr_regs; i++) |
| regmap_write(pmu_regs, ctrl->regs[i], ctrl->value); |
| } |
| |
| struct samsung_retention_ctrl * |
| exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata, |
| const struct samsung_retention_data *data) |
| { |
| struct samsung_retention_ctrl *ctrl; |
| struct regmap *pmu_regs; |
| int i; |
| |
| ctrl = devm_kzalloc(drvdata->dev, sizeof(*ctrl), GFP_KERNEL); |
| if (!ctrl) |
| return ERR_PTR(-ENOMEM); |
| |
| pmu_regs = exynos_get_pmu_regmap(); |
| if (IS_ERR(pmu_regs)) |
| return ERR_CAST(pmu_regs); |
| |
| ctrl->priv = pmu_regs; |
| ctrl->regs = data->regs; |
| ctrl->nr_regs = data->nr_regs; |
| ctrl->value = data->value; |
| ctrl->refcnt = data->refcnt; |
| ctrl->enable = exynos_retention_enable; |
| ctrl->disable = exynos_retention_disable; |
| |
| /* Ensure that retention is disabled on driver init */ |
| for (i = 0; i < ctrl->nr_regs; i++) |
| regmap_write(pmu_regs, ctrl->regs[i], ctrl->value); |
| |
| return ctrl; |
| } |